Trabajos Construction & Trades en El Monte, CA - Page 2Crear alertas

Job Description The Maintenance Technician proactively identifies and executes maintenance tasks without direction from a supervisor to ensure efficient operation in the yard. These responsibilities include equipment installation, repair, and maintenance activities pertaining to the Northstar facility, Northstar-owned assets deployed at customer locations, and the fleet of vehicles (tractors and tankers) to enable high utilization of equipment while complying with regulatory requirements (DOT, OSHA, and local regulations). Key responsibilities include: · Perform fleet inspections and validate inspections performed by contractors and vendors. Manage inspections and corrective maintenance on tractors. · Perform plumbing, installation, and maintenance of tanks and associated assets deployed at customer locations. · Perform installation, assembly, repair, and maintenance of process equipment on tankers including installation of valves, fittings, hoses, pumps, instruments, and other equipment to enable safe and efficient operation. · Perform installation and maintenance on equipment located in the tank farm and warehouse such as tanks, pumps, blowers, agitators, filters, instruments, piping, valves, fittings, hoses, and supports. · Perform and assist in chemical handling and transfers, including tanker loading, railcar offloading, manufacturing blend products in mix tanks, and performing QC testing of products. · Proactively identify and perform tasks to maintain equipment life span and improve appearance in the yard without being directed by a supervisor. · Work with key vendors to schedule, coordinate, and manage contracted maintenance activities for tankers, tractors (power units), and yard equipment. · Purchase and manage inventory of equipment and supplies for maintenance and operational activities following company purchasing policy and procedures. · Perform activities and participate as a HazMat Technician in the Emergency Response Plan, including chemical spill response on and off-site for incidents that involve company operations. The ideal candidate will have: · Minimum of (3) years of maintenance experience involving process equipment (pumps, valves, piping, hoses, etc.) · Experience in assembly, installation, and operation of process equipment used in liquid transport, including centrifugal pumps, air diaphragm pumps, valves, pipes, fittings, and hoses. · Mechanical aptitude and craft skills, including cutting, grinding, millwright skills (equipment & piping alignment, assembly, and installation), PVC pipe installation, and minor structural supports. · Proficient in the use of hand tools, including drill, saw, circular grinder/cutting tool. · Working knowledge of DOT maintenance requirements (49 CFR part 393 & 396) · Working knowledge of OSHA regulations, including management of change, fall protection, confined space, pipeline, and equipment opening, lock-out tag-out, safe work permit process, hot work, etc. · Must be able to meet all the requirements for respirator certification, including any medical certifications and yearly re-certification with fit testing per OSHA standard 29 CFR 1910.134 · Ability to fabricate (job layout, materials list, assembly, installation) as necessary for equipment installation in the yard or on tankers. Basic welding skills (for supports and brackets). · Experience supervising the work performed by a contractor is a plus. · Basic instrumentation and electrical knowledge, including reading basic circuit diagrams, troubleshooting, using communicators (HART or equivalent), amp meter, etc. · Basic computer skills including e-mail, Internet usage, purchasing, and expense report system. Job Type: Full-time Pay: $ 35 – $ 45 per hour, depending on experience Benefits: • Health and dental insurance, • 401(k) and profit sharing after a waiting period, • Life insurance, • Disability insurance · 8-hour shift (overtime as needed) · Monday to Friday · Weekends as needed Company DescriptionNorthstar Chemical is a well-respected company in the chemical industry based in Sherwood, OR, with locations in Tacoma, WA; Modesto, CA; and Los Angeles, CA. We specialize in mini-bulk and bulk deliveries of commodity chemicals to municipal and industrial customers. We have been in business since 1996, owing much of our success to our excellent employees. Our company has continued to experience uninterrupted growth for the past decade, and we expect this to continue indefinitely.Northstar Chemical is a well-respected company in the chemical industry based in Sherwood, OR, with locations in Tacoma, WA; Modesto, CA; and Los Angeles, CA. We specialize in mini-bulk and bulk deliveries of commodity chemicals to municipal and industrial customers. We have been in business since 1996, owing much of our success to our excellent employees. Our company has continued to experience uninterrupted growth for the past decade, and we expect this to continue indefinitely.

Job Description We are seeking Experienced Forklift Mechanic to join our Service Department team! IMMEDIATE JOB OPENING FOR Experienced Forklift Field Service Technicians • Performance-based pay structure, • Competitive pay, • $5,000 sign-on bonus (must commit to at least one year tenure, must have 3+ years of forklift mechanic verified experience and ownership of work tools.) Job Summary: This position requires knowledge of general material handling equipment. The Forklift Mechanics / Technicians must be capable of troubleshooting and providing repairs on an as-needed basis. It is essential for the Forklift Service Technicians to possess good knowledge of parts and the ability to determine if a part needs to be replaced or repaired. In addition, the Forklift Service Technicians must be able to write clear job recommendations and descriptions as well as ensure all paperwork is completed and given to the department Supervisor in a timely manner. Job Duties and Responsibilities: • Ability to communicate with customers both in-house and in the field, • Ability to determine whether work should be done in-field or in-house, • Repair gasoline, LPG, electric or diesel-powered forklifts., • Make repairs as needed including replacing worn or broken parts, adjusting brakes, tightening body bolts, aligning wheels, etc…, • Lubricate vehicle and perform other duties in connection with maintenance and operation of lift truck, as required., • Perform manual labor, as needed, such as heavy lifting and operating power equipment., • Inform Supervisor of maintenance problems as they arise., • Complete paperwork, as needed, to open and/or close work orders., • Attend technical classes/training when offered by Management., • Practice safe work habits., • Keep van clean. Report any vehicle problems to your supervisor., • High school graduate, • Minimum 3 years of Forklift Mechanic / Material Handling Service Technician experience, • Valid driver's license and excellent driving record, • Will be expected to drive (company van/gas provided) to TMHS customer sites. Sites vary over the general Los Angeles area, • Ability to read and follow GPS directions, • Own your own tools and tool box, • Must be able to write and spell English clearly and correctly, • Customer service attitude and aptitude, • Good attendance and punctuality a must, • Must be reliable, report to work on time, follow directions and get along well with coworkers and management personnel, • Expected to attend technical classes when offered by management, • High school diploma or equivalent (GED), required., • Three (3) + years of Forklift mechanic / Material handling equipment service experience, required., • Requires intermittent periods during which continuous physical exertion is required, such as walking, standing, sitting, stooping, climbing, lifting material or equipment, some of which may be heavy or awkward., • Must be able to physically operate power machinery, use hand tools, use air compressor tools, band saw and department grinder, steam cleaner, and parts washer machines,, • Must be able to physically lift 50 pounds unaided, • Must be able to physically listen, speak and interact with other Company associates, vendors, and customers regarding Service department needs., • Must be physically able to operate / drive a company van or Hino If you are passionate about mechanics and ready to take your career to the next level with a leader in the industry, apply now to join Toyota Material Handling Solutions! Company DescriptionToyota Material Handling Solutions (TMHS) has been serving the material handling needs of the Los Angeles area since 1973. We have remained the #1 material handling and logistics provider in Los Angeles County since 2000. We dedicate ourselves to continuous improvement or “kaizen” which focuses on finding a better way to do things. That commitment runs through the entire Toyota Material Handling Solutions organization, from our service technicians to our accounting department. After all, the Toyota way means always seeking a better way. We are a full service, one-stop-shop Material Handling Solutions Company providing new, used, rental, parts, service and training on forklifts and other Material Handling equipment. We also provide systems, racking and shelving, docks and doors, warehouse floor cleaning and port terminal equipment.Toyota Material Handling Solutions (TMHS) has been serving the material handling needs of the Los Angeles area since 1973. We have remained the #1 material handling and logistics provider in Los Angeles County since 2000. We dedicate ourselves to continuous improvement or “kaizen” which focuses on finding a better way to do things. That commitment runs through the entire Toyota Material Handling Solutions organization, from our service technicians to our accounting department. After all, the Toyota way means always seeking a better way.\r\n\r\nWe are a full service, one-stop-shop Material Handling Solutions Company providing new, used, rental, parts, service and training on forklifts and other Material Handling equipment. We also provide systems, racking and shelving, docks and doors, warehouse floor cleaning and port terminal equipment.

Job Description Express Employment of Covina, CA is seeking a Maintenance Mechanic for our client located in the City of Azusa Maintenance Mechanic $25.00 - $35.00 1st Shift Hours: 5:00am-1:30pm (Training 6-9 months) afterwards transition to 2nd shift 2nd Shift Hours: 1:00pm-9:30pm A local company In City of Azusa is searching for a Maintenance Mechanic who will help with various projects. Job Highlights: • Troubleshoot mechanical, electrical, and PLC, • Modify robotic and PLC programs, • Operate standard machine shop tools What we look for in a Maintenance Mechanic : • 4+ years of industrial maintenance experience, • Knowledge of pneumatics, hydraulics, PLC systems, • Ability to read schematics and operate machine tools Apply online or at our office: Express can help you find the job that is a good fit for your needs and abilities, and you’ll never pay a fee for our services and support. Two Ways to Apply: • Call our office 626-339-2200 Benefits of working with Express: (Place optional bullet points below job description) • Medical benefits, • 401K, • Safety incentives, • Training About us: Express works with job seekers to help find the right job for their skills and experience. As one of the leading staffing companies in North America, State, and Location Name, we’re ready to help you take the next step in your career. Whether you are ready for a full-time position, looking for part-time work, or want a more flexible schedule, Express has a wide range of jobs available including: • Administrative, • Light Industrial, • Skilled Trades, • Professional positions We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, disability status or genetic information.

Job Description SPT Labtech is a global supplier of innovative lab automation products for the life science markets. Our solutions save time and material costs and simplify complex operations. We are natural innovators. We create, design and manufacture high quality, robust and innovative automated laboratory equipment for academic, pharmaceutical and biotechnology research. We are looking for a talented Quality Control Inspector to join our growing team. You must have the ability to work on complex products and to work collaboratively and flexibly across several inter-disciplinary teams. Inspector Job Responsibilities: • Inspect and approve incoming materials by confirming specifications, conducting visual and measurement tests, and rejecting and returning unacceptable materials., • Inspect in-process production by confirming specifications, conducting visual and measurement tests, communicating required adjustments to production supervisor., • Approves finished products by confirming specifications, conducting visual and measurement tests, returning products for re-work, and confirming re-work., • Reject all in-coming materials, in-process production, and finished goods products that fail to meet quality standards by specifications or quality criteria through non-conformance process., • Assists Quality team members or management with failure and nonconformance data recording and reporting, • Prioritizes schedules based on product introduction and manufacturing schedules, maintaining a minimum turnaround time., • Accomplishes quality and organization mission by completing tasks and responsibilities as needed., • Keeps measurement equipment operating by following operating instructions and calibration requirements and calling for repairs., • Maintains safe and healthy work environment by following standards and procedures and complying with legal regulations., • Support the engineering manager or take ownership in resolving quality-related issues in a timely manner, • Recommend improvements to the production and quality control inspection process to ensure quality control., • Written and verbal communication skills, • Experience with inspecting electromechanical assemblies, machined and metal fabrication highly desired., • CMM experience a plus, • Basic math skills, • Excellent computer skills to include use of MS Office, • Attention to detail, • Analytic skills, • Documentation skills, • Time management skills, • Flexibility and able to change priorities on short notice based on production demands, • Hand/eye coordination, • Reporting skills, • High school diploma, • Experience with measuring devices such as meters, gauges, computers, calipers, and other measuring instruments, • One to two years’ quality inspector experience, • 401(k), • Health insurance, • Dental insurance, • Vision insurance

Job DescriptionPosition: Chief Inspector, PART 145 Job Summary: Seeking a highly skilled aviation professional responsible for overseeing all inspection activities within a maintenance facility certified under FAA Part 145 regulations, ensuring all aircraft repairs and alterations meet stringent safety standards by supervising inspectors, managing quality control procedures, and maintaining compliance with relevant regulations and manufacturer specifications: acting as the primary quality control authority within the repair station. Position Type/Expected Hours of Work: This is a full-time position, and hours of work are generally Monday through Friday. The operational needs of the organization may necessitate working after hours, weekends or holidays. Duties and responsibilities include but not limited to: • Ensure all repair activities adhere to FAA Part 145 regulations, manufacturer's maintenance manuals, and internal quality control procedures., • Monitor and enforce compliance with applicable Airworthiness Directives (ADs), • Supervise a team of inspectors, assigning tasks and ensuring proper execution of inspections throughout the repair process., • Perform complex inspections on aircraft components and systems, including pre- and post-repair checks., • Review and approve all inspection documentation, ensuring accuracy and completeness., • Develop, maintain, and update repair station quality control manuals, forms, and training materials., • Conduct regular quality audits to identify potential issues and implement corrective actions., • Analyze data to monitor repair station performance and identify areas for improvement., • Possess in-depth knowledge of aircraft systems, maintenance procedures, and non-destructive testing methods., • Stay updated on new regulations, technical bulletins, and industry best practices, • Generate detailed reports on inspection findings, non-conformances, and corrective actions taken., • Maintain accurate records of all maintenance activities and inspections performed, • Coordinate with FAA inspectors during audits and compliance reviews., • Address any FAA findings and corrective actions promptly· Responsible to exercise final inspection authority and authorized to sign and all forms confirming compliance related to inspection, repair, and return to service, • Maintain Aircraft logbooks and historical records. This includes relevant material including records of manufacturer’s overhaul manuals, service bulletins, FAA manuals, and other data as required, • Manage tool calibration program for inhouse tooling and precision test equipment, • Inspect aircraft for proper workmanship and airworthiness before, during and after work is performed by all technicians, • Ensure inspection personnel is thoroughly familiar with applicable regulations, and inspection methods, procedures, techniques, practices, aids, equipment, and tools used to determine airworthiness of articles after maintenance, preventive maintenance or alteration. Qualifications:, • Minimum 15 years of relevant experience on Boeing 737-300/400, • Formal training on 737-300/400, • FAA issued current Airframe and Powerplant license, • Inspection Authorization (IA) Desired, • Advanced comprehension of FAR's specifically 14 CFR Part 145, • Strong analytical skills, with ability to work under pressure and a high level of integrity, • Must exhibit a high level of motivation, sense of urgency, attention to detail, energetic approach to job duties and requirements, • Communication Proficiency, both written and oral., • Problem Solving/Analysis., • Project Management, • Collaborative Skills/ Teamwork, • Mechanical Skills- knowledge of machines and tools, including their designs, uses, repair, and maintenance., • Systems Skills for computer hardware & software including applications

Job Description ABOUT THE COMPANY Founded in 1888, Lee Kum Kee, a Hong Kong-based global food company, specializes in creating condiments and sauces that promote Chinese cuisine worldwide. With more than 200 products to choose from, Lee Kum Kee takes the mystery out of cooking authentic and delicious Asian foods in the comfort of your kitchen. Lee Kum Kee is committed to providing authentic and innovative condiments and sauces featuring the highest quality ingredients. Armed with a unique management culture, stringent quality control, superb and innovative products, coupled with the century-long brand reputation, Lee Kum Kee has achieved unanimous recognition and won numerous prestigious awards. BENEFITS • Medical, dental, life insurance covered by the company, • 401(k) retirement plan with company match, • Two (2) weeks vacations This position performs works related to online inspection, sanitation inspection, receiving inspection, and other activities related to quality assurance and quality control. ESSENTIAL FUNCTIONS Online Inspection • Conduct online inspections and verify the control parameters according to procedures and instructions for production, filling and packaging process., • Record result of inspection, including weigh-up, filling temperature, packaging material, product code, container closure, etc., • Perform GMP/hygiene inspection based on GMP and hygiene standards. Correct GMP/hygiene violation and report to production supervisor and/or QA Manager., • Conduct daily and monthly sanitation inspections, including pre-operation inspection and post-operation inspection., • Perform ATP test and environmental swabbing., • Monitor environmental air quality and inspect employees’ hygiene condition., • Inspect incoming raw materials and packaging materials according to QA/QC work instruction., • Take samples when needed according to the receiving manual, • Organize and update Raw Material Manual., • Organize and update receiving records., • Observe and record nonconforming products / production and promptly communicate with production supervisor and Quality Assurance Manager or designee for immediate action., • Make routine decisions for product holding, production line holding, etc, and verify correction and corrective action and document the incident accordingly., • Calibrate equipments used for inspections and report immediately if the device is malfunction., • Assist Quality Assurance Manager with any tasks related to quality compliance., • Perform other special assignment from the management. SUPERVISORY RESPONSIBILITIES This position has no supervisory responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactory. The requirements listed below are representative of the knowledge, skills, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE This position requires with minimum a high school diploma or general education (GED). Candidate must be able to work independently and in cross-functional teams to achieve established goals. Individual must be detailed-oriented, quality-oriented, with high sense of responsibility. LANGUAGE SKILLS Candidate must be able to speak, write, read and understand English to perform daily functions. Bilingual in English/Chinese or Spanish preferred. MATHEMATICAL SKILLS Ability to add, subtracts, multiply, and divides in all units of measure, using whole numbers, common fractions, and decimals. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written and oral form. Ideal candidate must be able to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. CERTIFICATES, LICENSE, REGISTRATIONS Not required. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands and fingers to perform daily job functions. The employee is required to stand, sit, kneel, and walk when performing essential job functions. Occasional lifting and/or move up 50 pounds. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment may be high and individual who works in certain areas needs to wear proper PPE (Personal Protective Equipment). Lee Kum Kee (USA) Inc., a division of Lee Kum Kee International Holdings Ltd., has its headquarters and manufacturing facilities in Southern California with more than 300 employees. We are looking for the best and brightest talents to join our company and work together to bring the next level of success! It is Lee Kum Kee’s policy to seek and employ the most qualified persons in all jobs in a manner which will ensure equal employment opportunity as well as administer personnel actions in a manner as to not discriminate against any person on the basis of race, color, religion, national origin, age, sex, sexual orientation, disability or protected veteran status. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description SUMMARY The Used Equipment Inspector inspects running condition of used heavy earthmoving and AG equipment for purchase or trade-in, providing technical support for equipment valuation, provide CAT Certified machine training of operation and safety to current and prospective customers. This job demands the ability to diagnose and estimate repairs understanding how a machine should operate and perform. RESPONSIBILITIES • Analyzes condition of heavy earthmoving and AG equipment considered for purchase or trade-in using the CATUSED.COM website., • Determine condition of equipment, whether the equipment is in good or poor condition, estimates repair costs, along with recommendation for purchase or trade-in., • Provide technical expertise and support to improve the products sold and serviced by dealer., • Maintains records of inspections, including photo of equipment as required., • Provides technical support to Sales Manager, sales and service departments as requested, such as Product Improvement Program (PIP) and attachments., • Reviews service repairs for accurate cost and quality., • Travels in and out of local territory to user/purchaser location(s) as required in the performance of equipment inspections and demonstrations., • Research new CAT Equipment to understand new options and operator procedures., • Maintains department vehicle and technical tools., • Reviews service repairs for accurate cost and quality, • A fit with Quinn Company’s performance driven culture and values of Integrity, Teamwork, Respect, Quality and Service, • Work safely at all times. Adhere to all applicable safety policies. Comply with all company policies, procedures and standards QUALIFICATIONS High School Diploma or GED required, Bachelor's degree desirable, and five to seven year’s related experience (methodical technician with substantial knowledge of heavy equipment) and/or training; or equivalent combination of education and experience. Valid California Driver's License as required for transportation and demonstration purposes. Company DescriptionOur history began in 1919 when Quinn Company supplied the Killifer Disc and Holt Tractor to the Fresno area farmers in their quest to develop the great San Joaquin Valley into the worlds richest agricultural region. In 1925, when Holt and Best Tractor Company merged to form Caterpillar Tractor Co. (now Caterpillar Inc.), Quinn became its dealer in the Fresno and Madera County area. Since then, we have expanded through acquisitions and grown along with the economy of California. Now in our fourth generation of family ownership, our operations span fifteen counties throughout central and southern California, including Arizona. Quinn now has 25 locations from Salinas to Foothill Ranch with more than 1600 employees to serve our customers. We are proud of the success we have built with the help of our customers, our employees and Caterpillar. history began in 1919 when Quinn Company supplied the Killifer Disc and Holt Tractor to the Fresno area farmers in their quest to develop the great San Joaquin Valley into the worlds richest agricultural region. In 1925, when Holt and Best Tractor Company merged to form Caterpillar Tractor Co. (now Caterpillar Inc.), Quinn became its dealer in the Fresno and Madera County area. Since then, we have expanded through acquisitions and grown along with the economy of California.\r\n\r\nNow in our fourth generation of family ownership, our operations span fifteen counties throughout central and southern California, including Arizona. Quinn now has 25 locations from Salinas to Foothill Ranch with more than 1600 employees to serve our customers.\r\n \r\nWe are proud of the success we have built with the help of our customers, our employees and Caterpillar.\r\n\r\n

Job DescriptionD.W. Mack Co., Inc is seeking a full time Junior Quality Inspector to join our team. You will conduct tests to determine the quality of finished materials and finished products. Alternative Workweek Schedule - Hours are Monday - Thursday 7:00am - 5:30pm Benefits include: Health, dental, vision, life insurance, profit sharing, vacation, sick pay Responsibilities: • Inspect in-process production by confirming specifications, conducting visual measurement tests, and communicating required adjustments to the production supervisor or machine operator., • Approves finished products by confirming the specifications, conducting visual and measurement tests, and communicating required adjustments to the production supervisor., • Documents inspection results by completeing reports and logs., • Keeps measurement equipment operating by following operating instructions and calibration requirements and calling for repairs., • Maintains a safe and healthy work environment by following standards and procedures, and complying with legal regulations., • Be a team member of the Quality department and support production and other internal departments to further th interest of the company.Qulaifications:, • Previous work experience in quality control or other related fields, • Strong attention to detail, • Strong analytical and critical thinking skills, • Excellent written and verbal communication, • Basic computer and math skills to calibrate and measure specifications, • Blueprint reading, • Ability to use measuring devices such as gauges, meters and calipers, • Experience in the Aerospace industry a Plus

Job DescriptionDescription: Company Background & Summary Votaw Precision Technologies is a trusted leader in the manufacturing of complex precision components, assemblies, and systems for the aerospace, defense, and industrial sectors. With a strong reputation for technical excellence, quality craftsmanship, and on-time delivery, Votaw supports some of the world’s most demanding programs through its advanced manufacturing capabilities. The company specializes in precision machining, fabrication, welding, and complex assembly operations for mission-critical applications. Votaw Precision Technologies is committed to continuous improvement, innovation, and delivering best-in-class solutions to its customers. The position of Digital Data Inspector will be responsible for the first article, in-process, and final inspection flight hardware; including but not limited to: fabricated parts, weldments, machined parts, tools, and assemblies. The Digital Data Inspector will be required to use various metrology tools to measure and compare actual features on components to the part requirements Essential Functions • Must be able to properly document inspection, prepare first article documentation and certification packages., • Perform in-process and final inspections on product and perform product build documentation review and end-item data package review., • Generate nonconformance reports for discrepancies discovered during inspection processes., • The ability to inspect using conventional inspection tools., • Interpret complicated aerospace drawings and specifications., • Minimum 5 years experience in Aerospace Quality Assurance with relevant experience in Aerospace and Mechanical field of work in the performance of technical job function., • High school diploma or equivalent, • Ability to read blueprints and use precision measuring tools (micrometers, calipers, comparators, and gages, etc.), • Must be able to read engineering documentation and inspect to drawings and parts lists, inspection plans, and supplemental instructions., • Ability to relate to officials, staff, and public in a courteous manner, • Willingness to work overtime; 2nd or 3rd shift activities are required., • Able to use Microsoft applications and ability to learn new computer programs/applications easily., • Ability to apply common sense understanding to carry out detailed oral or written instructions. Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge, skills, education, and experience. Votaw Precision Technologies, LLC is an Equal Opportunity Employer including Disability/Vets.

Job Description Quality Control Inspector Concorde Battery Corporation is a manufacturer of specialty lead-acid batteries and is the leading producer of lead-acid batteries for aircraft. Our other products include batteries for Marine, RV, and Photovoltaic Systems. We've been in business for over 45 years and continue to grow to meet the needs of our customers. People are the most important component to the success of a company and Concorde is fortunate to have a staff with over 150 years of battery manufacturing, designing and aircraft system experience. If you think you might be a good match, we encourage you to apply. Concorde Battery Corporation is currently looking for a driven candidate to start a career working in the Quality Department as a Quality Control Inspector. The successful candidate will be responsible for in process and final inspections. The Quality Control Inspector is part of the QA team and is also responsible for general quality related tasks. The Quality Control Inspector reports directly to the Quality Production Supervisor. Position Responsibilities: • Perform inspection of materials, processes and final product, per business need (manual instruments/CMM)., • Generates inspection reports according to AS9100 requirements., • Enters inspection data into information systems., • Utilizes inspection tools including calipers, gauges and testing equipment., • Reads and interprets drawings, procedures and work instructions., • Identifies areas for improvement in inspection processes and coordinates implementation., • 1+ years QA inspection experience using standard inspection tools including calipers, gages, etc. in a manufacturing environment., • Understanding of QA requirements, processes, practices and systems., • Demonstrated ability to work in team-based environments., • Ability to read engineering drawings to determine and measure features and tolerances., • Strong written and verbal communication skills in English., • Software experience; Excel, Word, Power Point, etc., • Desired first shift schedule, • Premium Health Insurance - $0 employee premium & $0 deductible, • Company provided life insurance for all employees with $0 employee contribution, • Dental, • 10 paid holidays, • 5 paid sick days, • Accrued vacation, • 401(k), • Profit Sharing, • Frequent overtime availability based on customer demand Job Posted by ApplicantPro

Job Description Grid Casting & Assembly Quality Control Inspector Concorde Battery Corporation is a manufacturer of specialty lead-acid batteries and is the leading producer of lead-acid batteries for aircraft. Our other products include batteries for Marine, RV, and Photovoltaic Systems. We've been in business for over 45 years and continue to grow to meet the needs of our customers. People are the most important component to the success of a company and Concorde is fortunate to have a staff with over 150 years of battery manufacturing, designing and aircraft system experience. If you think you might be a good match, we encourage you to apply. Concorde Battery Corporation is currently looking for a driven candidate to start a career working in the Quality Department as a Grid Casting & Assembly Quality Control Inspector. The successful candidate will be responsible for in process and final inspections. The Grid Casting & Assembly Quality Control Inspector is part of the QA team and is also responsible for general quality related tasks. The Grid Casting & Assembly Quality Control Inspector reports directly to the Quality Production Supervisor. Position Responsibilities: • Perform inspection of materials, processes and final product, per business need (manual instruments/CMM)., • Inspects battery grids for compliance to specifications in a metal casting environment., • Performs inspection of battery subassemblies and assemblies., • Generates inspection reports according to AS9100 requirements., • Enters inspection data into information systems., • Utilizes inspection tools including calipers, gauges and testing equipment., • Reads and interprets drawings, procedures and work instructions., • Identifies areas for improvement in inspection processes and coordinates implementation., • 1+ years QA inspection experience using standard inspection tools including calipers, gages, etc. in a manufacturing environment., • Understanding of QA requirements, processes, practices and systems., • Demonstrated ability to work in team-based environments., • Ability to read engineering drawings to determine and measure features and tolerances., • Strong written and verbal communication skills in English., • Software experience; Excel, Word, Power Point, etc., • Desired first shift schedule, • Premium Health Insurance - $0 employee premium & $0 deductible, • Company provided life insurance for all employees with $0 employee contribution, • Dental, • 10 paid holidays, • 5 paid sick days, • Accrued vacation, • 401(k), • Profit Sharing, • Frequent overtime availability based on customer demand Job Posted by ApplicantPro

Psychiatric Technician - Statewide in CA Position: Psychiatric Technician Location: Statewide - Multiple Locations Throughout California Annual Salary Range: $71,460 - $105,084 California Correctional Health Care Services (CCHCS) is looking for Psychiatric Technicians across California.This unique r

Job DescriptionCompany Description Multifamily Property Management Job Description The Maintenance Technician is responsible for the upkeep and maintenance of apartment homes, buildings, and grounds, and performs highly diversified duties to include but not limited to: repairing flooring, drywall, and appliances; troubleshooting and repairing plumbing, electrical, safety and security systems (lighting, locks, smoke/CO2 alarms, etc.), and HVAC systems; painting (interior and exterior); and cleaning (sweeping, mopping, garden/yard upkeep, etc.). The Maintenance Technician is responsible for conducting all job duties in accordance with company policy and all safety protocols, and supports the overall objective of meeting the expectations of the Client, based on the respective operating capital budget and management agreement. • Property Name: Lucia Apartments, • 9128 Burke St, Pico Rivera, CA 90660, USA, • Full-Time, • Unit Count: 141, • Reliable transportation to and from work, possibly including off-site training locations, is required to fulfill job duties. Pay: $19 - $21 / Hour DUTIES AND RESPONSIBLITITES 1.Client Relations • Adhere to the assigned maintenance program to ensure the most economical, proper and safe condition of the property, • Follow the preventative maintenance program as outlined in the Maintenance Manual., • Ensure grounds, curbs, and property aesthetics are in compliance with the FPI Curb Appeal Policies., • Perform maintenance inspections and repairs on vacant apartments to ensure proper operating conditions and appearance upon move-in., • Coordinate and/or assist in painting vacant apartments., • Change out appliances-install and remove as necessary., • Ensure timely completion of all unit turnovers according to FPI guidelines or based on the established scope of work for the property location. 5. General Maintenance Equipment and Systems • Repair and maintain any equipment owned by the apartment community including proper storage in a secure Location Maintain all maintenance shops and storage rooms in an orderly fashion and in compliance with safety regulations, • Properly secure all parts, supplies, and property equipment, • Maintain, within the budgetary limits, an inventory of parts to make necessary repairs, • Wear required uniform, if provided, and name badge during work hours. Refer to FPI Dress Code policy, • Consistently and fairly enforce community rules and regulations Standard Operating Procedures, • Comply with all Fair Housing Laws, • Promote a professional image by adhering to FPI Management's Dress Code Policy, • Conduct displayed must be of a professional manner when communicating with employees, residents, prospective residents, clients, vendors, and guests while representing FPI Management. Qualifications Minimum Requirements: • Minimum 1 year of experience in a similar role, preferably within Residential Property Management. Experience in hotel maintenance, facilities maintenance, or construction will also be considered., • High School diploma or equivalency certificate required; technical school and/or CAMT certification, preferred., • Must be able to wear a respirator, and have the ability to be medically fit for duty and cleared to wear a respirator, and comply with FPI's facial hair policy., • Must be proficient in speaking, reading, and writing in English., • Basic computer skills (email, internet, etc.)., • Rehab/Renovation, • Pool Maintenance, • Plumbing Repair, • Painting (Int & Ext), • Landscape/Grounds, • HVAC Maintenance, • Electrical Repair, • Drywall Installation/Repair, • Carpentry, • Boiler Systems, • Appliance Repair, • Complete Apt Turns, • Google Drive, • Google Mail (GMail), • Internet Use, • Basic Computer, • Customer Service Additional Information ESSENTIAL ATTRIBUTES • Embracing and exemplifying our HEART core values and incorporating them into every task performed and every interaction with clients, supervisors, team members, colleagues, residents, vendors, etc. EEO/EVerify Statements FPI Management is an Equal Opportunity Employer. All qualified applicants are encouraged to apply. FPI Management participates in the E-Verify program.

Job Description We are looking for an Industrial Maintenance Mechanic to manage and coordinate all building and production maintenance-related activities at Actek Enterprises. Key Duties and Responsibilities: • Implement and ensure compliance with all fire, safety, risk, environmental and health and safety regulations., • Minimize machine downtime through optimum use of preventative maintenance program and best practices., • Troubleshoot mechanical and operational problems on warehouse/production equipment and plan for and take corrective action; make necessary corrections and running adjustments to maintain maximum production and quality., • Make repairs to offices and property grounds as needed., • Maintain accurate and up to date maintenance records., • Utilize good housekeeping practices for a clean, organized warehouse and parts storage area., • Shop spare parts and supplies to obtain best pricing considering quality, service, and equipment specifications., • Actively participate in regular maintenance meetings with the Production Manager and supervisors., • High School diploma or GED, • Five years industrial maintenance experience., • Knowledge of OSHA regulations for manufacturing industries., • Excellent mechanical aptitude and problem solving skills., • Advanced understanding of hydraulics, pneumatics and mechanics, • Basic understanding of electrical systems and CNC equipment, • Ability to read blueprints and electrical schematic., • Strong fabrication and welding skills, • Ability to drive a forklift and scissor lift., • Basic computer skills., • Basic math skills., • Excellent interpersonal and communication skills with the ability to interact with all, • Must be able to speak and understand Spanish, • Prolonged periods standing and walking., • Ability to bend, stretch, push, pull, and move as needed to reach, clean, and service machinery., • Must be able to visually inspect machines., • Ability to lift up to 50 lbs.Company DescriptionActek® Manufacturing & Engineering has established a reputation for providing top-quality bushings and hoist rings for over 35 years. We recognize that our success is largely due to our amazing employees and make it a priority to value, respect, and celebrate our accomplishments. Actek is an Equal Employment Opportunity Employer and is committed to compliance with all federal, state, and local laws that prohibit workplace discrimination and unlawful harassment and retaliation. Actek will not discriminate against any applicant on the basis of race, color, age, national origin, religion, physical or mental disability or any other protected status under federal, state and local law.Actek® Manufacturing & Engineering has established a reputation for providing top-quality bushings and hoist rings for over 35 years. We recognize that our success is largely due to our amazing employees and make it a priority to value, respect, and celebrate our accomplishments.\r\n\r\nActek is an Equal Employment Opportunity Employer and is committed to compliance with all federal, state, and local laws that prohibit workplace discrimination and unlawful harassment and retaliation. Actek will not discriminate against any applicant on the basis of race, color, age, national origin, religion, physical or mental disability or any other protected status under federal, state and local law.

Job Description Great opportunity at a Sauce Production Company located in Irwindale. They are hiring maintenance technicians on their 2nd shift . • Monday - Friday, • 2:30pm start / Must be able to train on first shift, • Performs preventive maintenance inspections and service on machines., • Thoroughly cleans machines and machine parts, removing parts and reinstalling as necessary., • Oils and lubricates moving parts on machines to ensure effective performance., • Records and reports damaged, worn, or broken parts., • Send order requests for parts or replacements to management., • Identifies the causes of unexpected breakdowns of machines., • Repairs broken machines quickly and efficiently., • Prepares reports documenting work performed., • Read electrical and mechanical blueprints., • Electrical trouble shooting and repairs., • Able to work on your own accord., • Makes necessary modifications and implements tests runs; confers with product manager regarding test results and makes additional alterations to machinery as required., • Mechanically inclined with great problem-solving skills., • Works well independently and with others., • Good communication skills., • Organized with attention to detail., • Ability to work in a fast-paced and stressful environment.

Job Description 2nd Shift - 2:00pm - 10:30 pm Duties/Responsibilities: • Performs preventive maintenance inspections and service on machines., • Thoroughly cleans machines and machine parts, removing parts and reinstalling as necessary., • Oils and lubricates moving parts on machines to ensure effective performance., • Records and reports damaged, worn, or broken parts., • Send order requests for parts or replacements to management., • Identifies the causes of unexpected breakdowns of machines., • Repairs broken machines quickly and efficiently., • Prepares reports documenting work performed., • Read electrical and mechanical blueprints., • Electrical trouble shooting and repairs., • Able to work on your own accord., • Makes necessary modifications and implements tests runs; confers with product manager regarding test results and makes additional alterations to machinery as required., • Mechanically inclined with great problem-solving skills., • Works well independently and with others., • Good communication skills., • Organized with attention to detail., • Prolonged periods standing and walking., • Able to bend, stretch, push, pull, and move as needed to reach, clean, and service machinery., • Must be able to visually inspect machines. Our highly qualified management teams and representatives are dedicated to maintaining our exceptional reputation, which has made Q&B Foods one of the premiere suppliers to leading businesses around the world.Over 60 years of fine food, products and service.\r\nAs a division of Kewpie Corporation, Japan's leading manufacturer of mayonnaise, salad dressings, sauces, marinades and related products, California-based Q&B Foods, Inc. is uniquely qualified to produce the highest quality and tastiest products in the US marketplace.\r\n\r\nOur highly qualified management teams and representatives are dedicated to maintaining our exceptional reputation, which has made Q&B Foods one of the premiere suppliers to leading businesses around the world.

Job Description Location: Santa Fe Springs, CA Base Pay: $27 - $35 per hour (based on experience) Employment Type: Full-Time Industry: Printing / Manufacturing Travel: as needed Other Compensations: Health Insurance, Dental, Vison, Paid Vacation, 5 Personal Days, 9 Paid Holidays, 401K plan, Flexible Spending Account, Life Insurance, Long Term Disability, Employee Assistance Program. About Steven Label: Steven Label manufactures labels, overlays, membrane switches, sensors, product instructions for use (IFUs) and folding cartons — largely for the medical device industry. We provide our customers with some unique and valuable resources, including: • A proprietary on-line system that permits order placement, tracking and art submission., • ISO 13485 procedures to ensure quality products are delivered on time., • 2 major manufacturing locations in California, 1 in Arizona and 1 in Mexico with broad capabilities including screen, flexographic, offset and digital printing., • Support of Vendor Managed Inventory programs., • In-house engineering expertise in the manufacture of membrane switches and medical sensors., • Product Instructions for use on lightweight, pharmaceutical grade paper., • A commitment to delivering world class service to customers., • In business since 1954, Steven Label has a seasoned, customer-focused staff at all levels ̶ customer service, sales, engineering, production and management. Position Summary We are seeking a skilled and reliable Maintenance Technician to support our printing operations. This role is responsible for the maintenance, troubleshooting, and repair of production equipment across all company facilities, with travel required as needed. The technician will work with a range of printing and finishing equipment, including but not limited to flexographic presses, offset presses, silk screen presses, die cutters, bindery folders and stitchers, and rewind tables. The ideal candidate will have hands-on experience in the printing industry, a strong mechanical and electrical aptitude, and the ability to work independently while supporting a fast-paced production environment. General Responsibilities • Perform routine maintenance and repairs on equipment and building infrastructure., • Complete preventative maintenance tasks and maintain accurate records., • Assist with troubleshooting mechanical and electrical issues., • Ensure safe work practices and compliance with company policies., • Maintain a clean, organized, and hazard-free work area., • Support the production team by minimizing equipment downtime. Level II Responsible for both facility and equipment maintenance tasks, with a focus on technical and project-based work. Responsibilities: • Perform preventative and corrective maintenance on machinery and equipment., • Troubleshoot and repair mechanical and basic electrical issues., • Participate in special projects (equipment upgrades, installations, facility changes)., • Read and interpret maintenance manuals, mechanical drawings, and schematics., • Operate forklifts, scissor lifts, and other equipment safely. Qualifications: • 2+ years of experience in industrial maintenance preferred., • Basic mechanical and electrical troubleshooting experience required., • Vocational training or technical background strongly preferred., • Knowledge of 120V–480V systems a plus., • High school diploma or equivalent preferred., • Real ID driver’s license and US Passport required. Work Environment and Physical Requirements • Ability to lift up to 50 lbs, climb ladders, and work in various positions., • Exposure to noise, chemicals, and industrial equipment., • Flexibility to work off-shifts or weekends during urgent maintenance events. Steven Label is an equal-opportunity employer. We do not discriminate on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, marital status, military status, order of protection status, or any other legally recognized protected basis under federal, state, or local law.

Job Description Schedule: Monday- Friday 6:00AM- 2:45PM, possibility of overtime work. Position Summary The Maintenance Technician is responsible for maintaining, repairing, and installing industrial equipment and systems in a food processing facility. This includes both electrical and mechanical components. The technician ensures all production equipment is operating efficiently, performs preventive maintenance, troubleshoots issues, and completes necessary repairs with minimal supervision. Accurate documentation of work and adherence to safety protocols is required. Key Responsibilities * Troubleshoot, repair, and maintain production line and facility equipment * Perform routine preventive maintenance on all systems and machinery * Assist with equipment installation and production line setup * Support production operations by operating and maintaining key machinery * Diagnose mechanical and electrical issues and take corrective action * Replace motors, gearboxes, and other mechanical components * Perform basic mechanical rebuilds and equipment overhauls * Read and interpret electrical schematics and low-voltage safety circuits * Maintain a clean, safe work environment and follow all safety standards * Participate in the company’s emergency response team * Perform other maintenance tasks as assigned by management Qualifications & Experience * High school diploma or GED required * 4+ years of experience troubleshooting pneumatic and mechanical equipment * 2–3 years of electrical repair experience * Strong knowledge of centrifugal and positive displacement pump repairs * Experience with automated/high-speed packaging equipment preferred * Proficient in reading schematics and performing system diagnostics * Able to disassemble, repair, and reassemble complex production machinery

Job Description IMMEDIATE job opportunity for a driven individual who has a proven track record of performance and desire to work for a well-established organization. We are looking for an experienced Maintenance Mechanic for a great private manufacturer and food distributor located in City of Industry, CA. Must have food industry background - 2nd shift availability The Maintenance Mechanic handles all preventative maintenance, repairs, and troubleshooting on industrial machinery and production equipment. They will be working with systems including, but not limited to Packaging machines, belted fryers, pumps, motors, gearboxes, conveyors, and other industrial production equipment. Company environment: Production, fast paced, focused on safety, quality and on time product shipment. Will be communicating closely with immediate supervisor, between shifts, with production supervisors and machine operators. There is a strong emphasis on one team pulling together. Perform highly diversified duties to maintain production machines. Provide emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service. Perform simple machinist duties and responsibilities. Perform mechanical skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines. Read and interpret equipment manuals and work orders to perform required maintenance and service. Diagnose problems, replace, or repair parts, test and adjust. Perform regular preventive maintenance on machines, equipment, and plant facilities. Perform a variety of plumbing maintenance and carpentry functions. Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties. Detect faulty operations, defective material, and report those and any unusual situations properly. Requirements High School diploma or GED; 2 years’ experience in the maintenance and repair of industrial production equipment in the food or beverage industry. Packaging and strong mechanical experience is required. Industrial Electrical and mechanical troubleshooting skills required. Ability to follow manufacturers specifications and schematics. Must be able to read electrical schematics. Knowledge of pneumatics. Experience in troubleshooting, repairs, and preventative maintenance on mechanical and electrical equipment. Experience with 3 phase electrical systems, industrial controls and VFDs. Experience in stainless welding is preferred. Experienced in PLC’s as well as other motion control devices is preferred. Able to complete paperwork accurately, legibly and on time. Understanding of regulatory agency guidelines like OSHA, FDA, NFPA, NEMA, and EPA regulations as well as being able to comply with them from a craftsman perspective. Able to communicate effectively with OEM technical assistance technicians. Ability to work with little supervision. Compensation: $25 - $30 hr. DOE If qualified and interested in the position, please email your resume relating your skills, background, and experience to the job opening. Company DescriptionOneCruit is a disruptive multi-state human capital business that focuses on staffing light industrial and clerical positions. We are currently in growth mode and expanding into our original roots in executive placement. This is your opportunity to help create and develop a leading brand within the permanent placement industry. OneCruit is built on a multilingual leadership team brewed from all walks of life. Our average tenure in the staffing industry is 20+ years. Our time in the industry has shown us how to be the best in the business: no corner-cutting, address risk head-on, be compassionate, and price our services competitively. Our loyal customers and associate staff ensure that we're doing things right. We celebrate holidays and family events together and have watched their amazing families grow. We understand that business moves fast, and we stand ready to help at any moment. We leverage technology to help us communicate and move information more efficiently. Our technology partners are the best at what they do, and our platform is scalable beyond our imagination today. However, our technology would be nothing to brag about without our branch operation teams and their ability to drive it. Kudos to them! Join us today.OneCruit is a disruptive multi-state human capital business that focuses on staffing light industrial and clerical positions. We are currently in growth mode and expanding into our original roots in executive placement. This is your opportunity to help create and develop a leading brand within the permanent placement industry.\r\n\r\nOneCruit is built on a multilingual leadership team brewed from all walks of life. Our average tenure in the staffing industry is 20+ years. Our time in the industry has shown us how to be the best in the business: no corner-cutting, address risk head-on, be compassionate, and price our services competitively.\r\n\r\nOur loyal customers and associate staff ensure that we're doing things right. We celebrate holidays and family events together and have watched their amazing families grow.\r\n\r\nWe understand that business moves fast, and we stand ready to help at any moment. We leverage technology to help us communicate and move information more efficiently. Our technology partners are the best at what they do, and our platform is scalable beyond our imagination today. However, our technology would be nothing to brag about without our branch operation teams and their ability to drive it. Kudos to them! Join us today.

Job Description Experience, knowledge and skills: A Maintenance Mechanic candidate with 5+ years of overall experience. The ideal candidate will have a manufacturing environment background, preferably aerospace. Candidate will have experience with the following: • [REQUIRED]* Minimum 2 years’ experience with CNC Machinery / Conventional mills/lathes, • Strong Mechanical knowledge & familiarity with industry related machines, equipment, tools [CNC, manual equipment, mechanical, electrical, hydraulic & pneumatic systems], • Flexibility and willingness to report to work in the event of machine breakdowns and emergencies, or scheduled PM’s, • Ability to multitask and organize/prioritize workload effectively, • Welding and fabrication skills strongly desired, • Heat Treat or Furnace experience is a PLUS but not required, • Ability to read and interpret drawings, blueprints, schematics, and electrical code NEC specifications to determine layout of industrial electrical equipment installations, • Experience with preventative maintenance, • Installing, replacing, or repairing electrical wiring, receptacles, switch boxes, conduits, feeders, fiber-optic and coaxial cable assemblies, lighting fixtures and other electrical components., • Can troubleshoot, diagnose, and repair electrical problems with equipment.Company DescriptionWe're not just a staffing company - we're a people company. At Amtec, we care about helping you reach your unique career goals. Since 1959, we’ve changed the lives of thousands of people for the better - people just like you. It’s our purpose to help you find meaningful work by matching your character, competence, and culture with an organization that truly values what you have to offer.We're not just a staffing company - we're a people company. At Amtec, we care about helping you reach your unique career goals. Since 1959, we’ve changed the lives of thousands of people for the better - people just like you. It’s our purpose to help you find meaningful work by matching your character, competence, and culture with an organization that truly values what you have to offer.

Job Description Aperto Property Management, Inc. (Aperto) is more than just a property management company—we are a team dedicated to excellence in the multifamily housing industry. Specializing in both conventional and affordable housing, our mission is clear: to set the gold standard in apartment management across the U.S., providing exceptional service, quality management, and superior results for our clients and residents. What We Offer: Joining Aperto, Inc. means becoming part of a company that values growth, empowerment, and success. Our property management platform supports a full range of services, from new lease-ups to stabilized assets and acquisition rehabs, ensuring comprehensive and expert support for our properties. We’re committed to providing a work environment where learning, development, and a positive culture are at the heart of everything we do. Why You’ll Love Working Here: Career Growth: We encourage our team members to develop their skills and advance in their careers with opportunities for training and internal promotion. Work-Life Balance: Enjoy generous paid time off and a supportive environment that values your well-being. Comprehensive Benefits: Full medical, dental, vision, and life insurance, along with long-term disability, a 401K with company match, and more. About the Role: We’re excited to invite a skilled and experienced Maintenance Technician to join our growing team Pico Rivera, CA. As a Maintenance Technician at Aperto, you’ll play a crucial role in maintaining the functionality, safety, and aesthetics of our communities. You’ll be responsible for troubleshooting, repairing, and maintaining all aspects of our properties to ensure a positive living experience for our residents. If you’re passionate about maintenance, problem-solving, and working in a fast-paced, team-oriented environment, Aperto, Inc. is the place for you to grow your career! What You’ll Do: • Perform general maintenance duties, including plumbing, electrical, HVAC, carpentry, and appliance repairs to ensure the property remains in excellent condition., • Respond to maintenance service requests promptly, prioritizing work orders based on urgency and importance., • Conduct regular property inspections to identify and address any issues before they become major problems., • Ensure all safety protocols are followed and that the property complies with all health and safety regulations., • Assist with turnover repairs and preparation of vacant units for new residents., • 2+ years of hands-on maintenance experience in multifamily housing or a similar environment., • Proficient in troubleshooting and repairing plumbing, electrical, HVAC systems, and general carpentry., • Experience with HVAC certification, EPA certification, or other relevant maintenance credentials is a plus., • Strong problem-solving skills and attention to detail., • Ability to prioritize tasks and work effectively in a fast-paced environment., • Excellent communication skills and a team player mentality. Apply Now and discover why Aperto Property Management, Inc. is the place for maintenance professionals who want to make a real difference! Aperto Property Management, Inc. is an equal opportunity employer. iCalBRE Broker License Number 02042194. Company DescriptionAperto Property Management, Inc. is a full-service, fee-based apartment management company for conventional and affordable multi-housing communities. Our our mission is to simply be the best apartment management company in the United States and to provide quality management, professional service, and superior operating results to our clients and residents. We provide a workplace where our associates are empowered to take initiative, and there is a distinct culture of learning and development. Aperto Property Management, Inc. - CalBRE Broker License Number 02042194- is an equal opportunity employer, and uses E-Verify as part of the I-9 process to verify the work eligibility of all new hires.Aperto Property Management, Inc. is a full-service, fee-based apartment management company for conventional and affordable multi-housing communities. Our our mission is to simply be the best apartment management company in the United States and to provide quality management, professional service, and superior operating results to our clients and residents.\r\n\r\nWe provide a workplace where our associates are empowered to take initiative, and there is a distinct culture of learning and development.\r\n\r\nAperto Property Management, Inc. - CalBRE Broker License Number 02042194- is an equal opportunity employer, and uses E-Verify as part of the I-9 process to verify the work eligibility of all new hires.

Job Description Position Summary The Electrical Mechanical Foundry Maintenance Technician is responsible for ensuring the smooth and efficient operation of electrical and mechanical systems within a foundry setting. This role involves troubleshooting, repairing, and maintaining equipment used in the foundry processes, including furnaces, casting machines, oven furnaces, and other machinery. The technician ensures that all equipment functions optimally to maintain production efficiency, safety, and compliance with industry standards. Pay Rate: $35.00 - $40.00 per hour (DOE) Essential Duties and Responsibilities The essential functions include, but are not limited to the following: • Perform advanced troubleshooting and maintenance on complex foundry equipment, including but not limited to furnaces, oven furnaces, and casting systems., • Diagnose, repair, and maintain foundry equipment. Perform routine inspections preventive maintenance and emergency repairs., • Lead and execute equipment installations, upgrades, and major repairs while ensuring compliance with safety standards., • Develop and implement preventive maintenance schedules to minimize downtime and optimize equipment performance., • Train and mentor junior mechanics, sharing best practices in equipment repair and maintenance., • Collaborate with engineering and production teams to identify and resolve equipment-related issues impacting production., • Document maintenance activities, creating reports and logs to support compliance and continuous improvement initiatives., • Ensure that electrical and mechanical systems comply with all relevant regulatory standards and codes., • Analyze and resolve mechanical and electrical problems using troubleshooting techniques and diagnostic tools., • Maintain an organized inventory of spare parts to ensure quick access during repairs or replacements to minimize downtime Minimum Qualifications (Knowledge, Skills, and Abilities) Required: • 5+ years of experience in mechanical maintenance and repair, preferably in a foundry or heavy industrial setting., • Strong understanding of mechanical systems, hydraulics, and pneumatic systems., • Proven ability to read and interpret technical manuals, wiring diagrams, schematics, and engineering drawings., • Strong ability in fabrication and welding., • Electrician certificate or license., • Familiarity with Lean Manufacturing principles and practices., • Proficient in the use of hand and power tools, diagnostic equipment, and precision measuring instruments., • Experience with maintenance tools for tracking work orders and equipment performance., • Strong analytical and problem-solving skills, with the ability to think critically under pressure., • Excellent communication skills, both verbal and written, to effectively collaborate with cross-functional teams., • Demonstrated leadership capabilities, with a focus on fostering a collaborative team environment., • Adaptable and willing to take on new challenges in a fast-paced setting., • Proactive attitude and enthusiasm for hands-on work Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. Work is primarily conducted in a foundry or manufacturing setting with exposure to high temperatures, noise, and heavy machinery. Personal protective equipment (PPE) such as safety glasses, gloves, ear protection, and steel-toe boots is required. This job will require employee to stand, walk, stoop, kneel, crouch, or crawl and walk/climb stairs and ladders, and extend arms and hands to reach. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Noise level is usually moderate to intense. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts, fumes or airborne particles, and outside weather conditions

Job Description Fertig & Gordon Companies, Inc. – Hiring 4 Cleaning & Janitorial Technician Fertig & Gordon is seeking a dependable and detail-oriented team member with hands-on experience in cleaning and maintaining apartment exteriors, laundry rooms, commercial spaces, and unit vacancies. The ideal candidate will have a sharp eye for detail, particularly when performing full vacancy turnovers that require comprehensive, top-to-bottom cleaning. Responsibilities Include: * Cleaning of building exteriors, laundry rooms, and commercial storefronts * Full deep cleans of vacant units, ensuring readiness for new tenants * Completing detailed online reports with accompanying photos and notes for each assignment * Reporting back to management with accurate updates on job completion Requirements: * Strong attention to detail and cleanliness standards * Reliable vehicle for daily travel between job sites * Valid driver’s license and current car insurance * Ability to communicate clearly and professionally with office staff and supervisors * Punctuality, accountability, and a proactive attitude Compensation: * Starting at $20/hour, with growth potential based on performance If you take pride in your work and want to be part of a team that values quality and professionalism, we’d love to hear from you. Company DescriptionWe are a local Property Management company. We are looking for someone to join our growing team.We are a local Property Management company. We are looking for someone to join our growing team.

Job Description Local family owned plumbing company based out of Whittier, CA looking for an honest plumber with minimum 6 years experience skilled in residential, apartment homes, restaurants, gas stations, etc. for full service and repair plumbing. Clean driving record, must pass background check and most importantly, if you don't know how to solder, don't bother. Service and repair plumber needed to run service calls. -Clear kitchen sink drains, bathroom drains, mainlines, toilet, and bathtub drains. • Pipeline repair, replacement, and installation of copper pipes, galvanized pipes, and pvc pipes -Soldering is a must. -Install water heaters, shower valves, kitchen sink and bathroom faucets, garbage disposals, etc. -Assess plumbing challenges, leak detection, slab leak repair, and hydro-jetting. -Perform routine plumbing maintenance.

Job Description We are seeking a skilled and detail-oriented Cabinet Maker to join our team. The ideal candidate will have experience in crafting custom cabinetry, furniture, and woodwork pieces using both hand tools and woodworking machinery. You will be responsible for reading blueprints, selecting materials, measuring and cutting wood, assembling components, and finishing pieces to the highest quality standards. Key Responsibilities: * Read and interpret blueprints, drawings, and specifications * Select appropriate materials based on project requirements * Measure, cut, shape, and assemble wood and wood substitutes using hand tools and woodworking machines * Install hardware (hinges, drawer slides, handles, etc.) * Sand and finish surfaces, applying stains, lacquers, or paints as needed * Assemble and install cabinets, vanities, and built-in furniture at job sites when required * Maintain tools and equipment in safe working condition * Ensure workspaces are clean and organized * Collaborate with designers, contractors, and team members to meet project deadlines and specifications * Adhere to safety standards and company policies Requirements: * Proven experience as a cabinet maker or in a similar role * Proficiency in woodworking tools and machinery (saws, routers, planers, jointers, etc.) * Strong understanding of wood properties and joinery techniques * Ability to read technical drawings and plans * Excellent attention to detail and craftsmanship * Physical stamina and strength to handle heavy materials and long hours on your feet * Good math and measurement skills * Valid driver’s license (for installation roles) Preferred Qualifications: * Familiarity with commercial and residential cabinetry standards

Job Description Plumbing Service Technician Description: We are seeking a skilled and honest Plumbing Service Technician with a minimum of 5 years of experience in residential, commercial, and industrial plumbing services. The ideal candidate will be experienced in performing full-service plumbing repairs across various settings, including residential homes, apartment complexes and commercial buildings. A clean driving record is a must. All candidates must pass a background check. Key Responsibilities: • Troubleshoot, repair, and maintain plumbing systems for optimal performance and customer satisfaction., • Service and repair a variety of plumbing systems, including kitchen sink drains, bathroom drains, mainlines, toilets, and bathtubs., • Repair, replace, and install copper water lines, galvanized water lines, gas lines and PVC materials., • Perform soldering for pipe connections., • Install water heaters, shower valves, kitchen/bathroom faucets, garbage disposals, and more., • Diagnose and repair plumbing leaks, slab leaks, and perform hydro-jetting., • Provide routine plumbing maintenance and inspections. Qualifications: • Minimum of 5 years of experience in plumbing services., • Strong expertise in service and repair plumbing., • Proficient in soldering., • Ability to clear and repair drains, install fixtures, and handle pipe installations., • Backflow testing certification is a plus but not required., • Strong problem-solving skills and keen attention to detail., • Excellent communication skills with a focus on customer service., • Ability to work both independently and as part of a team. If you are a dedicated professional with a commitment to excellence, we want to hear from you. Apply today to join our dynamic team!

Job Description We are seeking a Plumbing Service Technician to join our team! The selected individual will perform service and repairs in both the residential and commercial industries. Responsibilities: • Assemble and install plumbing systems, • Troubleshoot and repair pipe and pipeline systems, • Review blueprints and building codes to determine optimal work procedures, • Maintain and repair septic and commercial sewer systems, • Prepare written work cost estimates for clients, • Previous experience in plumbing and maintenance, • Ability to handle physical workload, • Strong troubleshooting and critical thinking skills, • Strong written and verbal communication skills

Job Description CraneVeyor Corp., is seeking for a qualified Crane Maintenance Electrician/mechanic for our South El Monte Facility. Prior crane experience with AC motor controls, maintenance skills, and strong mechanical aptitude is required. Must be willing to work at heights and must have a good driving record. Local travel, excellent benefits. Company DescriptionCraneVeyor Corp has been providing quality products and dependable service to the construction industry and to manufacturers since 1946. CraneVeyor Corp. - With its Headquarters in South El Monte CraneVeyor Corp. began manufacturing overhead cranes, and distribution of packaged hoists and is now the largest regional crane manufacturer and the largest distributor of hoists in the West. We offer complete crane systems including runways, support structures and installation; and we have a complete and capable service department for continuing crane inspection and preventative maintenance. We have been fabricating and installing architectural and industrial railings since 1960. In addition to standard aluminum handrails, CraneVeyor Corp. produces several proprietary railing systems, and we will fabricate custom railings from stainless steel, aluminum, brass, bronze and glass to your specifications. Our Structural Steel and Miscellaneous Iron & Steel Divisions fabricate a broad range of products. CraneVeyor Corp. manufactures hardware required to construct storm drains, highways and bridges, and we fabricate all types of bridge rail. A recent addition of a large TransCover was necessary to meet the demand in our structural steel fabricationCraneVeyor Corp has been providing quality products and dependable service to the construction industry and to manufacturers since 1946.\r\n\r\nCraneVeyor Corp. - With its Headquarters in South El Monte\r\nCraneVeyor Corp. began manufacturing overhead cranes, and distribution of packaged hoists and is now the largest regional crane manufacturer and the largest distributor of hoists in the West. We offer complete crane systems including runways, support structures and installation; and we have a complete and capable service department for continuing crane inspection and preventative maintenance.\r\n\r\nWe have been fabricating and installing architectural and industrial railings since 1960. In addition to standard aluminum handrails, CraneVeyor Corp. produces several proprietary railing systems, and we will fabricate custom railings from stainless steel, aluminum, brass, bronze and glass to your specifications.\r\n\r\nOur Structural Steel and Miscellaneous Iron & Steel Divisions fabricate a broad range of products. CraneVeyor Corp. manufactures hardware required to construct storm drains, highways and bridges, and we fabricate all types of bridge rail. A recent addition of a large TransCover was necessary to meet the demand in our structural steel fabrication

Job Description Birdi Systems, Inc. is seeking a reliable, detail-oriented Field Logistics & Service Technician to support the efficient delivery, handling of materials, while also performing preventative maintenance and service on electronic security systems. This role is critical to keeping our operations and projects running smoothly—from managing inventory and transporting equipment to ensuring our clients’ physical security systems operate at peak performance. Key Responsibilities: Material Handling & Logistics • Safely load, transport, and deliver materials, equipment, and tools to job sites within a 60-mile radius., • Operate company vehicles, ensuring timely and accurate deliveries., • Verify shipment contents against packing lists and purchase orders., • Organize, track, and restock inventory as needed., • Maintain accurate inventory records and conduct regular audits., • Perform preventative maintenance on physical security systems, including access control, CCTV, intrusion detection, and related equipment., • Inspect and clean system components, test hardware, and check wiring for wear or corrosion., • Respond to service calls, troubleshoot issues, and document work performed., • Coordinate with the Service Manager on repair needs and next steps., • High school diploma or equivalent; technical certifications in security systems a plus (willing to train)., • 1+ years of experience in material handling, warehouse operations, delivery driving, or security systems service., • Valid driver’s license with a clean driving record., • Ability to lift and move up to 50 lbs. and work on ladders., • Strong attention to detail, organizational skills, and communication abilities., • Basic computer skills for inventory tracking and service reporting., • Ability to pass a background check and obtain airport security badging., • Combination of warehouse, office, field, and client-site work., • Regular lifting, bending, and material handling up to 50 lbs., • Occasional travel to central and northern California job sites; company vehicle or car allowance provided.Company DescriptionBirdi Systems, Inc. (BSI) is an award-winning, full-service systems engineering consulting and contracting firm based in Los Angeles, California. We specialize in providing technology solutions for major airports and transportation entities across the United States, with office locations in California, Colorado, Florida, and Washington, D.C.Birdi Systems, Inc. (BSI) is an award-winning, full-service systems engineering consulting and contracting firm based in Los Angeles, California. We specialize in providing technology solutions for major airports and transportation entities across the United States, with office locations in California, Colorado, Florida, and Washington, D.C.

Job Description MINIMUM QUALIFICATIONS: • 1-2 years of crane service technician or relevant trade experience (electrical, mechanical, etc)., • Must have strong verbal, written and interpersonal communication skills., • Demonstrate the ability to learn mechanical, electrical, and industrial skills., • Candidate must be willing to travel and work in production environments, with some overnight travel possible., • Ability to operate company phone and computer., • Ability to complete electronic forms in a timely manner., • Ability to work extended hours, and on holidays, as required., • PHYSICAL REQUIREMENTS:, • Ability to stand/walk 95% of the work day., • Lift /Carry up to 40-50 pounds unassisted., • Squat, twist, reach, climb, and bend frequently., • Ability to push/pull material with equipment assistance., • Possess hand/eye coordination and bilateral dexterity (gross and fine)., • Possess depth perception and peripheral vision., • Subject to working frequently at considerable heights., • Competitive pay, • Medical / Dental / Vision Insurance, • 401k plan with match, • Mandatory OT Saturdays, DT Sundays, OT after 8 on Weekdays, • Short and long-term disability insurance available, • Paid holidays, • PTO Program, • Boot StipendCompany DescriptionA high-growth overhead crane company, CraneTech is focused on becoming the best crane service provider in the nation measured by customer and employee satisfaction. The company is well-established, well-funded, and well-positioned to support sustained expansion while continuously delivering exceptional products and service. We are industry leaders with a unique culture that differentiates us from our competitors and other field service businesses. A values-driven meritocracy, we provide our team members with opportunities for personal and professional growth.A high-growth overhead crane company, CraneTech is focused on becoming the best crane service provider in the nation measured by customer and employee satisfaction. The company is well-established, well-funded, and well-positioned to support sustained expansion while continuously delivering exceptional products and service. We are industry leaders with a unique culture that differentiates us from our competitors and other field service businesses. A values-driven meritocracy, we provide our team members with opportunities for personal and professional growth.

Job Description Quinn is hiring a Service Technician for out heavy equipment at our City of Industry, CA location. Upgrade your Career! Become a Quinn Technician You’ll have an opportunity to work with some of the most advanced and powerful equipment on earth • Total Rewards – Quinn offers competitive pay and benefits in addition to other rewards including profit sharing and training, • Career Advancement - Ongoing technical and managerial training means dealer technicians follow exciting and fulfilling career paths, • Advanced Training – Whether you’re a skilled or entry level technician, Quinn can provide you with education and training to further your career., • Pride in what you do – Your helping maintain and repair equipment that has an impact on your community Wages Starting wage for an Advanced Technician will depend on experience and education. $37.77 - $42.55 Responsibilities Essential duties and responsibilities of an Advanced Technician include the following. Other duties may be assigned. • Perform repairs with limited departmental supervision with higher level of responsibility for repair., • Possess tooling required by the service department., • Maintain good attendance and punctuality., • Disassemble and assemble machines/components. Recondition/repair as required., • Work overtime as required by workload and customer need., • Select proper tooling for any standard job and demonstrate proficiency with Cat diagnostic tools., • Perform diagnostics and organize appropriate repair procedures., • Successfully complete appropriate training sessions as required., • Demonstrate safe and proper application of hand, pneumatic and electric tools., • Perform tasks from verbal/written instructions and communicate effectively with supervisor and fellow employees., • Follow directions as given; follow company policies and procedures., • Build competencies and share skills with other technicians, retain acquired knowledge., • Treat customers and co-workers in a courteous and professional manner., • Be responsible and proactive for personal development and training requirements for growth., • Stay current with Cat product line. Utilize resources from Cat and Quinn Company., • Demonstrate and promote Quinn Company core values of Relationships, Integrity, Teamwork, Respect, Quality and Service., • Travel to other stores, customer sites and other dealer and Caterpillar facilities for work or training., • Work alternate shifts as required by workload. APPLY TODAY! Company DescriptionOur history began in 1919 when Quinn Company supplied the Killifer Disc and Holt Tractor to the Fresno area farmers in their quest to develop the great San Joaquin Valley into the worlds richest agricultural region. In 1925, when Holt and Best Tractor Company merged to form Caterpillar Tractor Co. (now Caterpillar Inc.), Quinn became its dealer in the Fresno and Madera County area. Since then, we have expanded through acquisitions and grown along with the economy of California. Now in our fourth generation of family ownership, our operations span fifteen counties throughout central and southern California, including Arizona. Quinn now has 25 locations from Salinas to Foothill Ranch with more than 1600 employees to serve our customers. We are proud of the success we have built with the help of our customers, our employees and Caterpillar. history began in 1919 when Quinn Company supplied the Killifer Disc and Holt Tractor to the Fresno area farmers in their quest to develop the great San Joaquin Valley into the worlds richest agricultural region. In 1925, when Holt and Best Tractor Company merged to form Caterpillar Tractor Co. (now Caterpillar Inc.), Quinn became its dealer in the Fresno and Madera County area. Since then, we have expanded through acquisitions and grown along with the economy of California.\r\n\r\nNow in our fourth generation of family ownership, our operations span fifteen counties throughout central and southern California, including Arizona. Quinn now has 25 locations from Salinas to Foothill Ranch with more than 1600 employees to serve our customers.\r\n \r\nWe are proud of the success we have built with the help of our customers, our employees and Caterpillar.\r\n\r\n

Job Description POSITION OBJECTIVE: As with all company employees, the overall objective of this position is to enhance the growth and profitability of Mee Industries, Inc. The incumbent is expected to devote his/her best efforts toward that goal. This will be accomplished by proper installation of jobs to meet the demand of the current and future sales growth. RESPONSIBILITIES & DUTIES: • Install, maintain and repair cooling or humidifying fog systems to the satisfaction of customer., • Ensure all tools and equipment are available to complete job on site., • Coordinate with customer the system layout and installation., • Obtain sign-off at completion of installation with customer signature approval., • Coordinate the installation schedules with customer and local contractor., • Perform maintenance of MeeFog software program at job sites as needed., • Perform quality control field inspection that includes testing of equipment., • Perform plumbing and/or electrical work as needed., • Work in accordance with established safety procedures and within state and federal codes., • Other related duties as assigned. EDUCATION: • Prefer High School or GED; equivalent work experience may be substituted for education. KNOWLEDGE: • Must know basic plumbing, electrical, welding, and pipefitting techniques., • Basic knowledge of mechanical and electrical blueprints and diagrams., • Basic knowledge of use of hand and power tools. REQUIREMENTS: • Minimum of 2 years experience in the areas of heating, ventilation and air conditioning system install, service or repair., • Must be able to work independently and/or with little supervision in a fast paced environment., • Must meet physical demands as required., • Must be willing and able to travel up to a two-month period within US and abroad.

Job Description Transmission Technician Location: Puente Hills Ford About Puente Hills Ford Puente Hills Ford, located in the City of Industry, has proudly served Southern California drivers with honesty, integrity, and exceptional service. As a trusted name in the automotive industry, we provide a complete experience that includes a wide selection of new and pre-owned vehicles along with certified maintenance and repair services. We are more than just a dealership. We are a team of dedicated automotive professionals focused on delivering outstanding customer service and creating a supportive workplace where employees can grow and succeed. Job Description Puente Hills Ford is seeking an experienced Transmission Technician to join our growing service department. This role requires a technician with in-depth knowledge of transmission systems and a commitment to high-quality repairs. If you are Ford Certified and have a passion for diagnostics and drivability, we want to hear from you. Job Type: Full-time Schedule: Monday to Friday, occasional Saturdays as needed Pay: $50-$60 per hour based on previous experience and qualifications Responsibilities: * Diagnose, repair, and rebuild automatic and manual transmissions * Identify drivability issues and perform powertrain diagnostics * Perform road tests to confirm repair success * Communicate repair status and recommendations with service advisors * Maintain accurate documentation of all services performed * Keep work area clean, safe, and organized * Follow dealership and manufacturer repair procedures Qualifications: * Ford Certification * Previous experience in a Ford dealership is a plus * At least 1 year of Fleet or Dealership experience * CDL certification preferred * Teammate with a strong sense of dedication to the customer and service team * Self-motivated and professional * Possess own tools * 1+ years of experience working with transmissions * Ford transmission certification preferred * ASE certification is a plus * Strong diagnostic and mechanical skills * Ability to operate electronic diagnostic equipment * Valid driver's license and clean driving record * Must be able to pass a background check and drug screening Why Join Puente Hills Ford: * Competitive flat-rate pay structure * Ongoing factory training and certification opportunities * Access to a modern, well-equipped shop environment * Supportive management team and growth-oriented culture Benefits: * Health, Dental, and Vision Insurance * 401(k) Retirement Plan * Paid Vacation and Holidays * Paid Training & Certifications * Employee Discounts Equal Opportunity Employer: Puente Hills Ford is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive workplace and do not discriminate based on race, religion, gender, age, national origin, veteran status, disability, or any other protected status under applicable law. Apply Today! Be part of something new and exciting. Apply now to be considered for this opportunity at our upcoming state-of-the-art facility.

Job Description Are you a passionate car enthusiast with a knack for problem-solving? Do you thrive in a fast -paced, dynamic environment? if so, we have the perfect opportunity for you! At Puente Hills Volkswagen, we're looking for a dedicated and energetic Volkswagen technician to join our stellar team and help us keep our customer's vehicles running smoothly and efficiently. Available Positions: Quick Lube Technician Entry-Level Service Technician Experienced Service Technician Master Service Technician Technician Specific Benefits • Shop equipped with the newest technology, • Uniforms provided, • Discounts on products and services, • Highly productive shop, • Career advancement opportunities, promote from within, • ASE and state inspection certification reimbursement and all training expenses paid to further your career, • Continued education, manufacturer hands on and web-based training, • Clean and professional work environment, • Health, Medical and Dental, • 401K Plan, • Paid time off and vacation, • Growth opportunities, • Employee vehicle purchase plans, • Family owned and operated, • Long term job security, • Check and communicate oil level to teammates, • Ensure tire pressure for proper inflation, • Inspect and refill fluid levels as necessary, • Complete vehicle inspection, • Install a new oil drain plug and a new oil filter, • Clean and lubricate fittings as needed, • Perform work specified on the repair order with efficiency and in accordance with dealership, • Test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment, • Diagnose, maintain, and repair vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc., • Communicate directly with the Service Advisor so that customers are informed if any additional service is needed. Provide an estimate of time needed for additional repairs, • Previous experience at an automotive dealership, • Strong understanding of the service drive, • Years of experience vary per position, • High school diploma or equivalent, • Dexterity, requiring a steady hand, excellent hand-eye coordination, • Mechanical and troubleshooting skills, • Excellent customer service skills, • Basic computer competencies, • Positive, friendly attitude, along with a customer service mentality, • Enjoy working in a fast-paced environment, • Team player with ability to collaborate with others effectively, • Ability to learn new technology, repair and service procedures and specifications, • Able to operate electronic diagnostic equipment, • Valid driver's license and clean driving record, • Willing to submit to pre-employment drug screen and background check We are an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. We are committed to providing a safe, drug-free work environment. Applicants must be willing to submit to a pre-employment background check and drug test. Interested candidates must possess a valid driver's license and have a satisfactory driving record.

Job Description Cortica is looking for dedicated, compassionate Behavior Technicians to join our growing team and help us design and deliver life-changing care for children with neurodevelopmental differences. At Cortica, we don't just offer jobs; we offer careers with purpose, growth, and support. What We Offer: • Pay Range: $20.87-$28.00 per hour, based on experience and education., • Fully Paid Training & Certification: Kickstart your career with Cortica with a comprehensive 3-week, in-person orientation that includes hands-on training, a Board-Certified Autism Technician (BCAT) exam review, and full coverage of your exam fees. We're invested in your success from day one., • Referral Bonus: Earn between $250-$500 for successful referrals., • Cell Phone Stipend: Stay connected with support from us., • Paid Drive Time and Mileage Reimbursement: We value your time on the road and include toll reimbursement in select areas., • 401(k) with Company Matching: Secure your future with our generous plan., • Ongoing Professional Development: Access continuous training through in-person and online opportunities., • Supportive Environment: Collaborate with and receive expert coaching from Lead BTs, ABA Assistant Supervisors, and ABA Supervisors who champion your growth., • Career Advancement: Opportunities to grow your career by advancing to a BCBA role, ascending the Behavior Technician Clinical Ladder, or serving in a corporate support role., • Learn from Experts in Other Fields: Partner with BCBAs and experts in speech-language therapy, music therapy, occupational therapy, and physical therapy as well as counselors, pediatricians, neurologists, and nurse practitioners. Your Impact & Responsibilities: • Provide 1:1 and group behavior-analytic services to children with autism and other neurodevelopmental differences., • Implement positive behavior strategies developed with your BCBA., • Use evidence-based practices to create meaningful progress for families., • Document session data to track and support treatment goals., • Collaborate closely with families and supervisors to build supportive environments., • Follow Cortica's crisis protocols, including de-escalation and mandated reporting. Who We're Looking For: • Experience working with children (experience with autism is a plus!)., • High School or equivalent, bachelor's or master's degree., • Willingness to obtain your BCAT credential within 90 days of your start date (We provide all training!)., • Ability to consistently travel between client sites within a 30–40-minute radius using reliable transportation., • Tech-savvy with EMR systems and Microsoft Office tools. Our Inclusive Culture: • Transdisciplinary Approach: Collaborate with experts in various fields to care for the whole child., • Collaborative Process: Develop individualized care plans alongside families and clinicians., • Strength-Based, Neurodiversity-Affirming Model: Focus on building on each child's unique strengths rather than emphasizing deficits. Join Cortica's team and make a meaningful impact by applying a strength-based, neurodiversity-affirming ABA therapy model. Help children recognize and build on their unique abilities, fostering positive relationships and skills that translate across home, school, and community settings. Be part of a progressive approach that combines neuroscience and developmental models to empower each child to thrive. EOE. This posting is not meant to be an exhaustive list of the role and its duties. You are occasionally required to stand, walk, sit, climb, balance, kneel, crouch, or crawl; reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Team members must occasionally lift and/or move up to 40 pounds. #GlendaleBICareers #LI-MB1 Please review the job description in the following link: Privacy Notice Cortica is committed to protecting your personal information in compliance with applicable federal and state laws. Please review our Privacy Notice to understand how your data is collected, used, and protected. Fair Chance Ordinance Compliance Cortica is committed to fair hiring practices. Qualified candidates with criminal histories and/or driving violations will be considered and are not automatically disqualified from employment, consistent with applicable federal law, the California Fair Chance Act, and local ordinances. Driving Requirement This position requires the successful completion of a post-offer background check and a motor vehicle report review. E-Verify Participation This employer participates in E-Verify. Click here to view the E-Verify Poster and your Right to Work. Este empleador participa en E-Verify. Haga clic aquí para ver el cartel de E-Verify y su derecho a trabajar.

Job DescriptionBenefits/Perks • Careers Advancement Opportunities, • Flexible Scheduling, • Use your expertise and diagnostic tools to evaluate vehicle malfunction codes, • Assist with establishing service center procedures for tracking repair status, maintaining technical documentation, and other necessary protocols, • Carry out routine vehicle maintenance tasks such as tire rotations, oil changes, and brake pad replacements, • Conduct in-depth vehicle inspections of all systems, including engine, transmission, and brakes, • Ensure a high level of customer satisfaction and repeat business, • Convey necessary vehicle repair information to customers in a clear and concise mannerQualifications, • High school diploma or GED is required, • An associate degree or completion of an automotive service technician training program is preferred, • Automotive Service Excellence/ASE certification or Society of Automotive Engineers/SAE certification is preferred, • Strong customer service and communications skills are required

Job Description WE’RE HIRING: EXPERIENCED AUTOMOTIVE TECHNICIAN Are you a skilled and passionate auto tech looking to join a growing, customer-focused team? We’re hiring an Experienced Automotive Technician to join our fast-paced shop! Location: [Rosemead, Ca] Schedule: Full-Time Pay: Competitive (Based on Experience) Contact: Apply Now: What We Offer: ✅ Steady Workload — ✅ Modern Equipment & Tools ✅ Supportive team environment ✅ Ongoing training & growth opportunities Requirements: ✔️ 3+ years experience in automotive repair ✔️ Strong diagnostic & mechanical skills ✔️ Own tools preferred ✔️ Valid driver’s license If you take pride in your work, believe in quality repairs, and want to be part of a team that treats you like family — we want to meet you!

Job Description Experienced Automotive Technician needed for busy Santa Fe Springs automotive repair shop. Minimum 5 years of diagnostic experience. Must be proficient in diagnostics. Monday - Friday 7:30 to 5:00 work week with weekends & some holidays off. Experience a must!! Salary commensurate on experience. Company DescriptionYour Car Specialists has been serving the community since 1978. We are on the 3rd generation of some of our customer families. Customer Loyalty has been a trademark or our reputation!!!Your Car Specialists has been serving the community since 1978. We are on the 3rd generation of some of our customer families. Customer Loyalty has been a trademark or our reputation!!!

Job DescriptionBenefits/Perks • Careers Advancement Opportunities, • Flexible Scheduling, • Use your expertise and diagnostic tools to evaluate vehicle malfunction codes, • Assist with establishing service center procedures for tracking repair status, maintaining technical documentation, and other necessary protocols, • Carry out routine vehicle maintenance tasks such as tire rotations, oil changes, and brake pad replacements, • Conduct in-depth vehicle inspections of all systems, including engine, transmission, and brakes, • Ensure a high level of customer satisfaction and repeat business, • Convey necessary vehicle repair information to customers in a clear and concise manner Qualifications, • High school diploma or GED is required,, • An associate degree or completion of an automotive service technician training program is preferred, • Automotive Service Excellence/ASE certification preferred, • Strong customer service and communications skills are required, • Mechanical and troubleshooting skill and ability to operate electronic diagnostic equipment, • Excellent customer service skills basic computer competencies

Job Description We are seeking an experienced Senior Mechanical Assembly & Test Technician with a strong background in aerospace, solenoid, and valve assembly. This role is key in supporting both production and New Product Innovation (NPI), ensuring high-quality builds and compliance with all requirements. Key Responsibilities * Set up, assemble, and test solenoid and valve assemblies per manufacturing traveler and requirements * Operate hydraulic and pneumatic equipment during assembly and testing * Ensure compliance with flow-down requirements and quality standards * Support production operations across New Product Innovation (NPI) initiatives * Apply shop math functions to ensure accurate measurements and calculations Why Apply? * Be part of a company driving innovation in aerospace and advanced mechanical systems * Work with cutting-edge solenoid and valve technology * Collaborate with a highly skilled, experienced team * Competitive pay and comprehensive benefits package What We’re Looking For * High school diploma or GED required * 5–10 years of hands-on experience testing solenoid and valve assemblies (aerospace strongly preferred) * Proficiency operating hydraulic and pneumatic test equipment * Solid understanding of shop math functions and ability to apply them in daily work * Strong attention to detail, quality-focused mindset, and ability to follow technical documentation Company DescriptionExpress Employment Professionals is one of the top staffing companies in the U.S. and Canada. Every day, we help people find jobs and provide workforce solutions to businesses. Express provides a full range of employment solutions that include full-time, temporary, and part-time employment in a wide range of positions, including professional, commercial, and administrative. We will consider for employment all qualified Applicants, including those with Criminal Histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles' Fair Chance Initiative for Hiring OrdinanceExpress Employment Professionals is one of the top staffing companies in the U.S. and Canada. Every day, we help people find jobs and provide workforce solutions to businesses. Express provides a full range of employment solutions that include full-time, temporary, and part-time employment in a wide range of positions, including professional, commercial, and administrative.\r\n\r\nWe will consider for employment all qualified Applicants, including those with Criminal Histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance

Job Description Your expertise is the driving force behind our success. Join our Reconditioning / Service team and take pride in every repair you make. Automotive Technician Compensation and Benefits • Pay— Hourly Pay from $18 to $21, based on the years of experience., • Health, vision, dental, and life insurance you can select a plan that best suits your lifestyle and your family needs after only 30 days of employment!, • 401K- we will match 100% of what you contribute up to 4%., • Growth Opportunities - Ganas is committed to providing employees with new career opportunities., • Knowledge in all aspects of automotive repair and maintenance., • Must have a valid driver's license and ability to drive manual transmission vehicles., • English/Spanish preferred, • Monday to Friday 8 am to 5pm Please apply if you have worked in vehicle diagnostics, engine repair, preventive maintenance, brake systems, electrical systems, suspension work, auto parts replacement, fluid changes, Mobile Technician Responsibilities • Serve as primary client contact within the assigned geographic area., • Responsible for driving a company-provided vehicle to various locations within the assigned geographic area., • Examines vehicle, diagnoses, and, if needed, discusses with management the nature and extent of damage or malfunction Apply today and join our growing team! If you're a good fit, we'll contact you for a phone interview soon. Employment is contingent on passing a background check and drug screening. Tricolor Holdings is a drug-free, Equal Opportunity Employer. ¡Esperamos recibir tu solicitud! We are looking forward to receiving your application! Company DescriptionGanas Auto provides affordable loans that help people with little-or-no credit history finance. It offers bilingual (English/Spanish) sales at 9 locations in Los Angeles, CA and convenient payment processing. We are always looking for team players to join our family in different departments such as sales, service centers, and corporate positions. We are a family, we support you to achieve all your goals and we empower our teams by focusing on continuous improvement, taking advantage of our technology and using it with the energy and passion that we are known by. Together we are CONFIANZA Together we are PASIÒN Together we are ORGULLO Together we are FAMILIAGanas Auto provides affordable loans that help people with little-or-no credit history finance. It offers bilingual (English/Spanish) sales at 9 locations in Los Angeles, CA and convenient payment processing. We are always looking for team players to join our family in different departments such as sales, service centers, and corporate positions. \r\n\r\n\r\nWe are a family, we support you to achieve all your goals and we empower our teams by focusing on continuous improvement, taking advantage of our technology and using it with the energy and passion that we are known by.\r\n\r\nTogether we are CONFIANZA\r\n\r\nTogether we are PASIÒN\r\n\r\nTogether we are ORGULLO\r\n\r\nTogether we are FAMILIA

Job Description Quinn Company, your local Caterpillar store, is hiring a Lube Technician in City of Industry, California. Quinn Company is a Caterpillar dealership founded in 1919. The company sells, services, and rents a full line of new and used construction, agricultural, and material handling equipment, diesel and natural gas engines. As a Caterpillar Dealership, Quinn Company enjoys a unique ability to be a nimble company with entrepreneurial spirit and leverage the global reach and support of a Fortune 50 company… local and global at the same time. Quinn Company ranks among the top performing Caterpillar Dealers in the world. This competitive, performance-based drive is the foundation of the company’s culture. Repair of Caterpillar and/or related equipment or components, following established procedures and guidelines. Responsible for the operation and maintenance of the field lubrication/service trucks. Writes service reports on work performed. Complies with state and federal record keeping requirements. Responsibilities Essential duties and responsibilities include the following. Other duties may be assigned. • MUST HAVE -Class B commercial license., • Perform repairs under direct departmental supervision., • Possess tooling required by the service department., • Maintain good attendance and punctuality., • Work overtime as required by workload and customer needs, • Demonstrate safe and proper application of hand, pneumatic and electric tools., • Assist qualified technicians in repair tasks such as removal, installation and repair of components/machines., • Perform tasks from verbal/written instructions and communicate effectively with supervisor and fellow employees., • Follow directions as given; follow company policies and procedures, • Build competencies and share skills with other technicians and retain acquired knowledge, • Treat customers and co-workers in a courteous and professional manner., • Be responsible and proactive for personal development and training requirements for growth, • Successfully complete appropriate training sessions as required., • Stay current with Cat product line. Utilize resources from Cat and Quinn Company., • Demonstrate and promote Quinn Company core values of Integrity, Teamwork, Respect for People, Quality and Customer Service., • Other duties as assigned by manager, supervisor or lead person., • Travel to other stores, customer sites, other dealer and Caterpillar facilities for work or training, • Work alternate shifts a required by workload or customer needs and may be assigned to provide services outside of normal working hours during the week or on the weekend when unexpected needs surface., • Work in the field as required by manager or supervisor, • Carry out duties and responsibilities according to safety guidelines and policies., • Operate equipment, cranes and vehicles within design limitations and perform daily maintenance as required., • Demonstrate safe work practices at all times., • Wear Personal Protective Equipment (PPE), such as safety glasses, hearing protection and safety shoes as required, • Report any hazardous work conditions immediately to your supervisor or safety representative., • Maintain current forklift operator training certification., • Maintain MSHA certificate if applicable., • Employee shall receive general hazardous waste and Spill Prevention (SPCC) training along with any additional environmental related training that pertains to their specific job function. This training must be renewed on an annual basis., • Maintain clean and organized workspace and equipment., • Return tools and equipment to proper location., • Securing company and personal tools at the end of the shift., • Maintain clean and organized company vehicle if applicable., • Maintain clean and orderly lunchrooms, restrooms, locker rooms and common areas., • Commercial Class B License with Hazmat Endorsement, • One-year certificate or A.S. degree from a community college or technical school; Two to four years mechanical experience or equivalent education and experience., • Understanding/experience on CAT machines. Knowledge of proper use of required tools and equipment of the job. Ability to deal effectively with customers. Must hold HAZMAT Certification and Class B or A California drivers license with excellent driving record., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., • Ability to apply common sense understanding to carry out instructions furnished in written, oral or diagram form.Company DescriptionOur history began in 1919 when Quinn Company supplied the Killifer Disc and Holt Tractor to the Fresno area farmers in their quest to develop the great San Joaquin Valley into the worlds richest agricultural region. In 1925, when Holt and Best Tractor Company merged to form Caterpillar Tractor Co. (now Caterpillar Inc.), Quinn became its dealer in the Fresno and Madera County area. Since then, we have expanded through acquisitions and grown along with the economy of California. Now in our fourth generation of family ownership, our operations span fifteen counties throughout central and southern California, including Arizona. Quinn now has 25 locations from Salinas to Foothill Ranch with more than 1600 employees to serve our customers. We are proud of the success we have built with the help of our customers, our employees and Caterpillar. history began in 1919 when Quinn Company supplied the Killifer Disc and Holt Tractor to the Fresno area farmers in their quest to develop the great San Joaquin Valley into the worlds richest agricultural region. In 1925, when Holt and Best Tractor Company merged to form Caterpillar Tractor Co. (now Caterpillar Inc.), Quinn became its dealer in the Fresno and Madera County area. Since then, we have expanded through acquisitions and grown along with the economy of California.\r\n\r\nNow in our fourth generation of family ownership, our operations span fifteen counties throughout central and southern California, including Arizona. Quinn now has 25 locations from Salinas to Foothill Ranch with more than 1600 employees to serve our customers.\r\n \r\nWe are proud of the success we have built with the help of our customers, our employees and Caterpillar.\r\n\r\n

Job Description Specialty door manufacturer in the city of Pico Rivera is looking hire welders to join their team!! 2nd shift available to start ASAP!! Positions are temp - hire. Once hired - GREAT BENEFITS!!! • Bullet proof / acoustic / sound proof, • Sheet metal / Stainless Steel, • MIG / ARC Welding, • Manufacture and fabricate finished metal products, • Install and repair various equipment and components, • Follow blueprints to meet product specifications, • Calculate material measurements to verify specifications, • Must count with minimum 1 year consistent welding experience, • Available to work overtime & weekends as needed, • Open to work in different departments as needed / open to train, • Must have recent warehouse experience, • Must have reliable transportation, • Ability to lift up to 50 lbs, • Knowledge of power tools, • Know how to read a tape measure

Job Description Specialty door manufacturer in the city of Pico Rivera is looking hire welders to join their team!! 1st shift available to start ASAP!! Positions are temp - hire. Once hired - GREAT BENEFITS!!! • Bullet proof / acoustic / sound proof, • Sheet metal / Stainless Steel, • MIG / ARC Welding, • Must count with minimum 1 year consistent welding experience, • Available to work overtime & weekends as needed, • Open to work in different departments as needed / open to train, • Must have recent warehouse experience, • Must have reliable transportation, • Ability to lift up to 50 lbs, • Knowledge of power tools, • Know how to read a tape measure

Job Description We are seeking a Welder Fabricator to become an integral part of our team! The Welder will use specialized equipment to weld and assemble new metal forms. Responsibilities: * Perform welding duties using a wire welder, cutting torch and plasma. Heli Arc is a plus. * Weld steel components with welding equipment as specified by layouts, engineering drawings, work orders, or verbal instructions. * Work includes set-up, laying out work using jigs/fixtures or hand layouts to fabricate parts and/or rework finished products. * Work with fitters or fitters/welders to assist in the fabrication or welding of multi-component parts. Qualifications: • Previous experience in welding, manufacturing, or other related fields, • Familiarity with welding tools and procedures, • Familiarity with engineering blueprints and schematics, • Ability to handle physical workload, • Field work is required, • Overtime is readily available, must be willing to work weekends and OT when needed., • Majority of work is done in mining and aggregate facilities., • Majority of our work is heavier metal and wear plate., • Must be able to work day or swing shift as needed, • Must be self-motivated and hard working. Ability to work unsupervised is a plus., • Prior experience with quarries/mines/aggregate facilities and industrial repairs is a huge plus, • Pay rate is based on experience, • Reply to posting for interview and weld test. Do not call or come in for inquiry. Company DescriptionWe are an industrial repair shop located in Baldwin Park, in business for over 35 years. Our company conducts industrial repairs in shop and in the field throughout Southern California as needed. We are looking for hardworking, experienced, self-motivated individuals to join our team! MUST be willing to work overtime and weekends .......Do not contact direct. If qualified we will contact you- thank you.We are an industrial repair shop located in Baldwin Park, in business for over 35 years. Our company conducts industrial repairs in shop and in the field throughout Southern California as needed. We are looking for hardworking, experienced, self-motivated individuals to join our team! MUST be willing to work overtime and weekends .......Do not contact direct. If qualified we will contact you- thank you.

Job Description Position Summary Responsible for performing in-process correction of foundry discontinuities by manual welding. Position Salary Range(DOE): $23.00 - $35.00/hr Essential Duties and Responsibilities The essential functions include, but are not limited to the following: • Responsible for the welding operations on investment castings components using the Gas Tungsten Arc Welding (GTAW) method., • Read and interpret blueprints, technical drawings, and specifications to ensure accurate welding on castings per specifications, • Visually Inspect welded castings for integrity and customer requirements, • Repairs castings cosmetically as needed, ensuring quality welds and visual quality of castings. Common welds include groove, slot, build up, weld of windows, etc., • Maintains welding work area, equipment & tools ensuring a efficient, organized and safe work environment, • Collaborates with engineers and other team members to address issues with castings, possible solutions or improvements., • Minimum 5 years of experience of welding with focus on investment castings aerospace manufacturing., • Proficient in Gas Tungsten Arc Welding (GTAW), • Proficient welding with all alloys, Nickel, Cobalt, Stainless Steel, Aluminum, • Strong ability to work with precision and attention to detail, ensuring high quality results, • Strong problem-solving skills, ability to work under pressure, • Welding certifications, • Ability to communicate effectively and interact with other team members, • Proficient in basic arithmetic. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. • Minimal to Moderate-this position will usually require standing, walking, using hands, upper extremities, squatting,, • Regularly lifts 35 lbs., • This job does require some repetitive motions of the hands and fingers to perform the welding functions, lift castings, pull / push as required to get the castings set up for welding., • Characteristics-noise level is usually moderate This job description in no way states or implies that these are the only duties to be performed by the employee(s) of this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the employee(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an at will relationship. 1- 1st Shift position open- Hours are from 7:00am - 3:30pm Monday through Friday- Overtime Work needed depending on department demands

Job DescriptionDescription: Summary The position of Welder will be responsible for performing complex, welding/fabrication operations, interpreting blueprints and drawings, setting up and operating all welding equipment and hand tools, polishing and cleaning parts, inspecting parts, using material handling equipment and performing fit-up operations. Essential Functions • Interprets complicated aerospace drawings and specifications., • Uses various types of benching equipment, machine tools, precision measurement tools, and various hand tools., • Ability to lay and fabricate metal weldments and assemblies, • Performs rework assignments as required, • Ability to use a wide variety of basic deburr and hand finish tools, both electric and pneumatic such as (right angle grinder, die grinder, orbital sanders and other hand finishing tools and equipment)., • Ability to apply common sense understanding to carry out detailed but uninvolved oral or written instructions., • Must be able to weld using MIG, TIG, stick, or other welding processes., • Set up and operate band saws, brake presses, surface grinders, industrial trucks, and hoist/crane equipment, etc., • Knowledge in use of hand tools (drill motors, grinders, basic measurement Instruments, etc.), • Ability to lift and carry objects weighing from 15 to 50 pounds., • Minimum 6 years’ experience as a Welder; including prior experience in Aerospace/Manufacturing setting., • Requires the ability to read and interpret engineering drawings and specifications, • Ability to work occasionally in poor weather conditions, including heat, cold, rain, or snow Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge, skills, education, and experience. Votaw Precision Technologies, LLC is an Equal Opportunity Employer including Disability/Vets.

Job DescriptionAudi/VW Certified Technician - Audi West Covina Top Pay & Signing Bonus based on Experience and Certification! Location: Audi West Covina Employment Type: Full-Time Posted: June 27, 2025 About Us Audi West Covina is a premier dealership dedicated to delivering exceptional service and quality for Audi and Volkswagen vehicles. We are seeking a skilled Audi/VW Certified Technician to join our team, focusing on reconditioning, maintenance, and repairs for retail-ready vehicles. If you’re passionate about precision automotive work and certified in Audi or VW systems, we want you on our team! Job Summary As an Audi/VW Certified Technician at Audi West Covina, you will perform reconditioning, maintenance, and repairs on Audi and Volkswagen vehicles, as well as other makes, to prepare them for retail. Your expertise and certifications will ensure our vehicles meet factory standards and exceed customer expectations. Responsibilities * Perform mechanical diagnostics, and repairs. * Conduct routine maintenance (e.g., oil changes, tire rotations, brake repairs, fluid exchanges) and complex repairs on Audi and VW models. * Diagnose and resolve mechanical, electrical, and performance issues using advanced diagnostic tools and Audi/VW-specific software. * Ensure all vehicles meet Audi and Volkswagen factory standards, as well as dealership quality and safety requirements. * Collaborate with service advisors and sales teams to provide accurate repair timelines and vehicle condition reports. * Maintain a clean, organized, and safe work environment in compliance with dealership and manufacturer policies. Qualifications * Audi or Volkswagen factory certification preferred(e.g., Audi Technician Certification or VW Master Technician). * 2+ years of experience as a certified technician, with expertise in Audi/VW systems and reconditioning processes. * Proficiency with Audi/VW diagnostic tools (e.g., ODIS, VAS) and repair equipment. * Valid driver’s license with a clean driving record. * Strong attention to detail and commitment to delivering retail-ready vehicles. * Ability to work efficiently in a team-oriented, fast-paced environment. Benefits * Competitive hourly pay ($25 - 60/hour, based on experience and certification level). * Comprehensive health, dental, and vision insurance. * Paid ongoing training and opportunities for advanced Audi/VW certifications. * Career advancement potential within a leading luxury dealership. * Employee discounts on parts, services, and vehicles.