Trabajos dcs en Rochester, New YorkCrear alertas

Job Description Boiler / Refrigeration Operator Location: Rochester, NY (on-site) Schedule: 12-hour rotating shift (8-week rotation): 2 days (6:00am– 6:00pm), 2 nights (6:00pm–6:00am), then 4 days off Direct Hire Pay: $25–$43/hr About the role Join a large industrial utilities team supporting a well-established multi-building manufacturing/industrial campus in Rochester. You will operate and maintain industrial boilers, steam distribution, compressed air, industrial water systems, and refrigeration/water treatment equipment. Working hands-on in the plant and monitoring/adjusting systems through a DCS. What you’ll do • Perform routine inspections of boiler room, refrigeration, and water treatment systems; document operating data; adjust controls as needed, • Operate/monitor boilers, turbines, water treatment plant, and distribution systems in coordination with shift operations teams, • Support repairs on equipment and distribution piping as needed, • Sample/test chemical treatment systems and unload bulk chemicals, • Support shutdowns/startups, including lockout/tagout (LO/TO), • Maintain equipment housekeeping and operability, • Help develop/update standard operating procedures, • Perform maintenance tasks as needed (refrigerant handling, leak repair, pump packing adjustments, etc.), • Support overhead distribution piping systems, • Complete required recordkeeping/inspections and follow all safety protocols What we’re looking for • High school diploma or GED, • 2+ years in an operator/mechanic role (industrial environment preferred), • Working knowledge helpful in: refrigeration systems, cooling towers, water treatment, piping systems, building structures, steam turbines, • Strong communication skills; able to work across all levels of an organization, • Proficient with MS Office, • Ability to learn industrial software quickly (examples used on site may include CMMS, compliance/tagging tools, DCS/HMI platforms, and historian software; expected ramp-up ~3–4 months), • Valid driver’s license with proof of insurance Licensing / certifications (must obtain after hire) • City of Rochester S-3 Stationary Engineer License within 14 months, • City of Rochester R-4 Refrigeration Operator License within 18 months, • NYSDOH 2a Water Treatment Operator certification within 16 months, • US EPA Universal Refrigerant Handling certification within 12 months Work environment & physical requirements • Work in hot/cold ambient conditions at times; moderate plant noise levels, • Travel between buildings on a large industrial campus; appropriate PPE required, • Occasional bending/walking/carrying equipment; must be able to lift up to 50 lbs, • Must be able to work the rotating shift schedule described above System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. \nCompany Description System One is a leading provider of specialized, highly technical services and solutions to critical infrastructure, technology, life sciences, and government sectors. We partner with large private and public organizations who trust us to execute their complex, mission-critical initiatives through our outsourced services and workforce solutions. System One is a leading provider of specialized, highly technical services and solutions to critical infrastructure, technology, life sciences, and government sectors. We partner with large private and public organizations who trust us to execute their complex, mission-critical initiatives through our outsourced services and workforce solutions.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. \n L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. \n Job Title: Specialist, Program Management \n Job Code: 44169 \n Job Location: Rochester, NY (onsite) \n Job Schedule: 9/80 Employees work 9 out of every 14 days- totaling 80 hours working- and have every other Friday off \n Job Description: \n Mission Critical Communications (MCC) Department of Defense (DoD) business unit is seeking a Program Manager responsible for managing the cost, schedule and technical performance requirements of US DoD Programs through all phases from proposal to period of performance completion. Ensures that all resources such as engineering staffing, subcontractors, production, quality and facilities are available to support internal and external delivery targets. Manages programs to achieve MCC quarterly orders, revenue, OI & cash flow targets. Assists Sales team to secure new orders, formulate requirements, and help expedite orders. Works with customers to determine scope, technical and execution requirements and new business opportunities. Travel is required to customer locations. \n Essential Functions: \n\n • Experience running programs in the Defense and Aerospace industry and managing contracts for the US DoD.\n, • Experience managing Direct Commercial Sales (DCS) programs.\n, • Experience managing complex integrated systems programs.\n, • Drive establishment and monitoring of key performance indicators related to cost, schedule, risk and technical performance across all program life-cycle phases, from kick-off through production.\n, • Prepare and present comprehensive reports regarding project status, financials, and performance to internal and external stakeholders.\n, • Experience managing multiple subcontractors.\n, • Experience managing program budgets >$5M.\n, • Responsible for defining scope of work including program deliverables to guide an internal cross-functional team.\n, • Participates in the negotiation of contract and contract changes.\n, • Demonstrated ability to work in fast paced, dynamic environment.\n, • Effectively communicates with all levels of co-workers, senior management, and customer.\n, • General knowledge of FAR/DFAR requirements, and DPAS rated contracts.\n, • Ability to travel within the US up to 20%. \n • Ability to obtain a US Security Clearance\n\n \n Qualifications: \n\n • Bachelor’s degree with a minimum of 6 years of related experience\n, • Master’s degree with a minimum of 4 years of related experience\n, • Previous experience managing mid-size to large, complex programs including development or system integration \n\n Preferred Additional Skills: \n\n • Experience managing development programs or programs with significant non-recurring engineering (NRE) effort.\n, • Prior experience managing recurring commercial/production programs.\n, • PMP certification.\n, • MS Project experience.\n, • Earned Value Management (EVM) experience.\n, • Active Security Clearance of Secret or greater.\n\n \n In compliance with pay transparency requirements, the salary range for this role in New York state is [$80,500 - $149,500]. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. \n #LI-JD3 \n L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. \n Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. \n By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. \n L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.

Senior Instrument & Controls Technician Location: Rochester, NY | Onsite (Direct Hire / Full Time) Compensation: $40-$48 (Hourly / Non-Exempt) + Optional Overtime Reports to: Manager, Information & Communications Technology A highly specialized energy and utility infrastructure organization is seeking a Senior Instrument & Controls Technician to support and maintain critical industrial utility plant operations within one of the region’s most technically advanced industrial campuses. This individual will play a key role in maintaining and optimizing instrumentation and control systems that support steam, chilled water, and related utility services across a large-scale infrastructure environment. This is a unique opportunity for an experienced controls professional who enjoys solving complex technical challenges, working across both legacy and modern industrial systems, and playing a hands-on role in maintaining critical infrastructure operations. The environment offers broad exposure to power generation, utilities, automation, instrumentation, and plant control systems in a highly visible and operationally critical role. The ideal candidate will bring strong troubleshooting ability, industrial controls expertise, and the ability to work collaboratively across operations, maintenance, engineering, and external vendor teams. Why This Opportunity Stands Out • Work within a large-scale industrial utility and energy environment supporting critical infrastructure operations, • Exposure to a blend of classic and modern plant control technologies, • High-impact technical role with visibility across plant operations, • Opportunity to work on complex instrumentation, PLC, and distributed control systems, • Broad technical scope across utilities, boilers, turbines, chillers, generators, and process systems, • Stable operation with long-term infrastructure investment and modernization initiatives Key Responsibilities • Coordinate daily work activities of the Instrumentation & Controls team, • Install, maintain, troubleshoot, and repair industrial instrumentation and plant control systems, • Support PLC and Distributed Control System (DCS) hardware, software, and programming, • Calibrate and maintain instrumentation used to monitor pressure, flow, temperature, and analytical systems, • Troubleshoot pneumatic and electronic control devices, valves, dampers, and final control elements, • Modify and improve plant operating graphics and control configurations, • Coordinate contractors and field service providers supporting control system projects, • Support plant system reliability, operational efficiency, and continuous improvement initiatives, • Maintain proper system access controls and physical security of critical equipment Must-Have Qualifications • 10+ years of industrial controls, instrumentation, or utility plant experience, • Strong troubleshooting and problem-solving skills, • Experience supporting PLCs and Distributed Control Systems (DCS), • Ability to read and interpret electrical schematics, control drawings, and circuit diagrams, • Strong mechanical and electrical aptitude, • Experience working in industrial, utility, manufacturing, or power generation environments, • Familiarity with boilers, turbines, chillers, cooling towers, generators, and utility systems, • Valid driver’s license and proof of insurance Preferred Qualifications • Associate degree in Engineering Technology or related technical field, • Experience with industrial networking technologies including copper and fiber systems, • Familiarity with Windows operating systems and industrial PC environments, • Experience supporting industrial automation upgrades and process improvements Ideal Candidate Profile This opportunity is ideal for a technically curious and hands-on controls professional who enjoys operating independently, troubleshooting complex systems, and contributing to the reliability and performance of critical industrial operations. Candidates who thrive in fast-paced industrial environments and enjoy solving real-world operational challenges will be especially successful in this role. Precision Talent Partners, LLC values diversity and is proud to be an Equal Opportunity Employer. We are committed to creating an inclusive workplace where all employees feel respected, supported, and empowered to contribute. This description reflects management’s assignment of essential functions and does not restrict the tasks that may be assigned. Employment is at-will, and this job description does not constitute a contract of employment.

iWorld Professionals is seeking a Head of Power Plant Operations for our client in Rochester, NY. This is an excellent opportunity to lead operations at the power plant while overseeing the facility’s operations. This is an on-site leadership position offering a salary of $150,000–$170,000 plus a 20–25% bonus, with full relocation assistance available. Head of Power Plant Operations Responsibilities: • Lead and manage the plant operations team, including scheduling, staffing, training, development, and performance., • Oversee the day-to-day operation of the power plant, including boilers, steam turbines, generators, condensers, feedwater systems, and other plant equipment., • Direct plant operations to meet safety, reliability, efficiency, generation, and environmental goals., • Oversee the facility, ensuring a reliable fuel supply and compliance with safety and regulatory requirements., • Develop and maintain operating procedures, startup and shutdown processes, and emergency response procedures., • Lead day-to-day operating safety practices, including lockout/tagout, work permits, and emergency response procedures., • Monitor plant performance and operational data to identify issues, improve reliability, and reduce downtime., • Work closely with maintenance and other site teams to coordinate maintenance activities, outages, and equipment startup., • Manage operations staffing, supplies, and day-to-day expenses within the plant budget., • Maintain accurate operating logs, shift records, and documentation to support plant performance and compliance., • Support the Plant Manager with overall plant performance, environmental compliance, and operational goals. Head of Power Plant Operations Qualifications: • Minimum of 7years of power plant operations experience, • Previous experience leading or supervising power plant operations teams., • Experience managing staffing, operating costs, and resources within a plant budget., • Strong troubleshooting and problem-solving skills, including experience with root cause analysis., • Strong understanding of steam power plant systems, including boilers, turbines, generators, condensers, feedwater systems, and auxiliary equipment., • Strong knowledge of plant startup, shutdown, and load-following operations., • Familiarity with plant performance software and distributed control systems (DCS)., • Ability to read and understand P&IDs, engineering drawings, and system schematics., • Strong communication, leadership, and organizational skills. If you have strong power plant operations experience and enjoy leading teams, improving plant performance, and keeping operations safe and reliable, this is an exciting opportunity to take on a key leadership role with a growing organization. Excellent compensation package plus benefits. Base salary of $150,000–$170,000, plus a 20–25% annual bonus opportunity, with relocation assistance and advancement opportunities available. Apply today to iWorld Professionals for immediate confidential consideration.

Eastman Kodak Company is looking for a Control Technician to join our team in Rochester, NY. We are seeking an individual with the background to be successful supporting our ESTAR Manufacturing Operations located within Eastman Business Park in Rochester, NY. Responsibilities: • Provide technical support for the operation, maintenance and continuous improvement of manufacturing instrumentation and process control systems., • Work closely with operations, process engineers, and maintenance to understand the business and user needs and priorities., • Provide full life cycle support of control systems in the area, including developing requirements, programming support, commissioning, and ongoing hardware and software maintenance., • Support upgrade projects for existing Reliance Automax Machine Coordinated Drive Control Systems including identifying system hardware and software architecture improvement opportunities., • Provide hardware and integration support for Ethernet based control systems in the plant IT environment., • Work with maintenance to develop data driven reliability improvement opportunities, as well as troubleshoot system hardware, resolve software malfunctions, and assist in system improvements and software upgrades., • Implement improvements in systems capabilities that will increase the ability to meet customer requirements, including safe and reliable operations, and improve business competitiveness. Qualifications: • Associates degree in Electrical Engineering or Electro-Mechanical Technology (Mechatronics) or Equivalent Experience, • Knowledge and understanding of Rockwell Automation PLC's and Process Control DCS, • Communication skills; ability to interact with operator/mechanics/process engineers/staff/management, • Knowledge of Rockwell VFD’s, their application and configuration, • Ability to complete work independently and through influence, • Ability to lead and participate on teams, including outside contractors, • Ability to configuring, documenting, and troubleshooting control systems

Job Description I&C Technician (Instrumentation & Controls) Location: Rochester, NY Work Model: Onsite Schedule: Day shift | 8-hour shifts | 40 hours/week (overtime available) Pay Range: $26–$37/hour Position Summary The I&C Technician installs, maintains, troubleshoots, and repairs pneumatic, electronic, and digital instrumentation and control systems used across utility plants and distribution systems. Key Responsibilities • Install, repair, maintain, and adjust process instrumentation measuring/controlling pressure, flow, temperature, and analytical properties., • Troubleshoot, repair, and maintain park-wide distribution flow metering., • Repair/maintain final control elements such as control valves and damper drives (pneumatic and electronic)., • Inspect and calibrate instruments and test equipment; adjust calibration to meet applicable standards., • Repair and maintain I/O, power supplies, and control system hardware., • Maintain/edit control logic, programming, and operating graphics for PLCs and DCS systems., • Occasionally work in motor starters and electrical enclosures to debug and repair control system issues. Required Qualifications • Associate degree in engineering technology (or related field), vocational certification, or equivalent combination of education/experience., • 5+ years of experience in control systems, flow metering, or instrumentation in an industrial environment., • Valid driver’s license., • Strong mechanical/electrical aptitude and proven troubleshooting skills., • Ability to read/interpret electrical schematics, circuit diagrams, and technical manuals., • Ability to follow procedures and safety/environmental rules; work independently. Preferred / Plus • Experience with Emerson Ovation or other distributed control systems (DCS)., • Knowledge of industrial utility equipment such as boilers, turbines, generators, chillers, cooling towers, and air compressors., • Utility/energy plant “break-fix” maintenance background. Work Environment / Travel • Onsite at Eastman Business Park (Rochester, NY)., • Travel is limited to within the park grounds, as needed. Benefits / Additional Notes • Overtime opportunities available., • Generous PTO program, 10 company-paid holidays, personal days, and sick time., • Annual merit increase program (typically 3–4%, with higher increases for strong performers). System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M1 #LI-ST1 Ref: #275-Eng Kansas City

Job Description Job Title: Senior Instrument & Controls Technician Location: Rochester, NY Type: Direct Hire Compensation: Work Model: Onsite – onsite Responsibilities • Coordinate work of the I&C team to assure plant needs are met, • Install, repair, maintain, and calibrate process instruments used to control and measure variables such as pressure, flow, temperature, and analytical properties, • Repair and maintain pneumatic and electronic final control elements, such as control valves and damper drives, • Work in motor starters and electrical enclosures to debug and repair control system issues, • Inspect and calibrate instruments and test equipment periodically and adjust calibration to ensure proper functioning, • Repair and maintain I/O, power systems, and controller hardware for programmable logic controllers and distributed control systems, • Maintain and edit control programming for PLCs and DCS, • Administer the plant DCS for adequate access and change control, • Coordinate with suppliers’ field service to ensure control systems are operated safely and securely, • Manage outside contractors for control system projects and maintenance, • Reconfigure plant controls and graphics to improve system performance, • Ensure physical security of control system equipment, • Identify and implement opportunities for process improvements Requirements, • Two-year associate degree in engineering technology or related field, vocational certification, or equivalent experience, • Ten or more years of experience with industrial utility plant control systems, • Valid driver’s license and proof of insurance, • Good communication skills in English, • Ability to work independently and follow procedures, instructions, and safety rules, • Strong mechanical and electrical aptitude with excellent troubleshooting skills, • Experience with industrial utility equipment including boilers, turbines, generators, chillers, cooling towers, and air compressors, • Familiarity with modern network media, equipment, and technology (copper and fiber), • Proficiency with Windows OS, Office applications, and industrial control software including distributed control systems and PLCs, • Ability to read circuit diagrams, electrical schematics, and technical drawings System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M1 #LI- Ref: #275-Eng Kansas City

Job DescriptionDescription: JOB SUMMARY: The Controls Engineer III owns the design, development and implementation of control systems for complex machines and integrated multi-station cells. This role is assigned outcomes rather than methods, chooses its approach within department standards, and leads controls execution from design through commissioning. The position resolves conflicting requirements, adapts standard approaches where the application requires it, and evaluates the safety scheme for the machines it owns. It is the primary controls contact during debug, FAT and commissioning, assigns and reviews the work of Controls Engineer I and II within its scope, and contributes reusable modules and documentation back to the department. JOB DUTIES & RESPONSIBILITIES: • Own controls design for complex machines and integrated multi-station cells, • Determine control architecture and review the device list, • Evaluate the safety scheme; participate in hazard risk assessment and validate safety functions, • Define PLC program structure and outline; advanced use of UDT and AOI, • Own HMI concept and outline for a cell, • Design network topology and addressing; integrate robots and third-party equipment, • Determine power requirements and panel sizing; approve the electrical BOM, • Lead sequence validation, manual and auto mode runs, and fault recovery, • Run commissioning debug and electrical install validation, • Assign and review Controls Engineer I and II work; serve as named reviewer on code and drawings, • Estimate a machine or cell and participate in project risk assessment, • Contribute reusable modules to the library and own a guide family or annex, • Travel to customer sites to lead debug, commissioning and customer acceptance — approximately 25% of time. EDUCATION and/or EXPERIENCE: • Bachelor's degree in a related engineering discipline or equivalent experience, required., • 4–7 years owning complex machine or cell controls, • Experience with recovery, abnormal handling and cross-system integration, • Leadership in on-site debug, commissioning and acceptance, • Proficient on more than one PLC/HMI platform, • Experience evaluating safety schemes and validating safety functions, • Mentoring less experienced engineers; contributing reusable modules Requirements: SKILLS AND CHARACTERISTICS: • Software Applications Required, • Rockwell Studio 5000, • Rockwell FactoryTalk View ME and SE, • A second PLC platform (preferably Siemens TIA Portal), • AutoCAD Electrical, • Software Applications Desired, • Ignition, • Fanuc Handling Tool, RoboGuide and DCS, • Autodesk Inventor, • Structured languages (C#, Python), • Codes and Standards — working knowledge appropriate to the level, • NFPA 79, • NFPA 70 (National Electrical Code), • NFPA 70E, • UL 508A, • ANSI/RIA R15.06 — Industrial Robot Safety, • ISO 13849 — Safety-Related Parts of Control Systems, • Advanced technical depth; decomposes complex work into deliverable scope, • Chooses the approach within department standards without direction on method, • Root cause analysis and continuous improvement leadership, • Explains complex concepts to non-technical stakeholders, • Manages customer expectations on their scope through debug, FAT and commissioning, • Mentors Controls Engineer I and II in methods and standards, • Sound judgment under time and ambiguity constraints MEASUREMENTS OF SUCCESS: • Controls scope of assigned machines delivered end to end against plan, • Safety schemes evaluated and validated; hazard assessments completed, • Complex issues diagnosed and resolved independently, • Reviews of Controls Engineer I and II work completed, with findings closed, • Reusable modules contributed back to the library, • Owns a guide family or annex and keeps it current, • Customer expectations managed on their scope through debug, FAT and commissioning In compliance with pay transparency requirements, the wage range for this role is $110K - $125K. The rate range provided is a general guideline. When extending an offer, Adaptec Solutions considers factors including but not limited to experience and geographic location. Adaptec Solutions also offers a variety of benefits including generous paid time off (PTO), 11 paid company holidays including your birthday, generous health plans, dental and vision insurance, HSA/FSA accounts, generous 401(k) match and immediate vesting, short-term/long term disability coverage and basic life/AD&D insurance and education assistance. Adaptec Solutions, LLC is an equal opportunity organization. We recruit, employ, train, compensate, and promote without regard to race, religion, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, protected veteran status, or any other basis protected by applicable federal, state or local law.

Role Overview\n \n \nWe are looking for an Electrical and Instrumentation Mechanic to Support our Advanced Material & Chemicals division in Rochester, NY. \n \n Job Duties:\n \n\n • Electrician & Instrumentation skilled trade service to provide multi-discipline capability to repair, maintain, install and make improvements on film manufacturing equipment, complex processing equipment, chemical processing equipment, building general systems (includes instrumentation, pneumatics, hydraulics, controls (PLC's & distributed control systems (DCS), and a wide range of electrical components)\n, • Ability to calibrate process control instruments tight tolerances using sophisticated calibration equipment.\n, • Ability to achieve a high level of expertise to effectively troubleshooting and repair equipment, including root cause analysis.\n, • Some experience or expertise in mechanical, piping, HVAC equipment and controls.\n, • Includes maintenance of motors, breakers, starters, variable speed drives, process controls devices, heat tracing, lighting, etc.\n, • Calibrate, alignment and make adjustments with test equipment and measurement equipment.\n, • Installation of conduit, wiring, switches, relays, lighting, circuit breakers using power tools and hand tools\n, • Install upgrades to enhance or replace outdated control systems.\n, • Execute preventive and predictive maintenance programs.\n, • Data entry and report writing including ISO documentation.\n, • Working knowledge of Microsoft Office and maintenance software tools.\n, • Ability to change based on priorities\n\n \n Requirements:\n \n\n • Dependable, maintain good attendance\n, • Maintain a clean work area and operate in a safe manner at all time.\n, • Detail orientated Team Player\n, • Strong electrical and/or instrumentation training and demonstrated skills/experience\n, • Proficient in Math functions\n, • Must demonstrate effective analytical troubleshooting skills\n, • Able to read electrical, instrument and machine drawings\n, • Able to read/modify PLC programs to troubleshoot equipment problems\n, • Understanding of new electrical codes for hazardous environments (flammable liquids)\n, • Ability to work effectively with minimal supervision\n, • Excellent safety record - places safety and environment as top priority in all work\n, • Knowledge of Lock Out / Tag Out\n, • Good communication skills - daily communications with leaders, maintenance planner, technical staff, engineering and operations as needed.\n, • Team player - willing be flexible, often work in other areas and with other trades as needed.\n, • Significant walking or other means of mobility.\n, • Ability to work in a standing position for long periods of time (up to 8 hours).\n, • Ability to reach, bend, stoop, push and/or pull, and frequently lift up to 35 pounds and occasionally lift/move 40 pounds.\n, • Ability to work off of ladders or scaffolding, in some awkward positions\n, • Indoor and outdoor work assignments\n, • The noise level in the work environment is usually moderate to loud.\n, • Wears protective clothing and/or Personal Protective Equipment required by the work environment or governmental regulations.\n\n \n Qualifications:\n \n\n • HS diploma, and a 2-year degree or some level of instrumentation, electrical of demonstrated trade experience.\n, • Varying schedule to include evenings, holidays, weekends and extended hours as business needs dictate.\n\n \n EOE Policy Statement:\n \nAll qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or disability.\n \n Estimated Salary: $32.00 - $40.00 \n \n Experience Level: 0-5 Years \n \n Requisition ID: 2129

Job Description Dental CAD/CAM Manager Location: Rochester, NY Job Type: Full-time, Onsite Compensation: $80,000–$100,000 per year, based on experience Additional Compensation: Incentive opportunities available Benefits: Premium benefits package and relocation assistance available Job Overview A growing dental laboratory is seeking an experienced Dental CAD/CAM Manager to lead and support its digital design team. This role is ideal for a strong CAD/CAM professional who combines advanced technical knowledge with leadership, organization, and the ability to guide a team in a fast-paced dental lab environment. The right candidate will oversee digital design workflows, support quality standards, troubleshoot technical issues, and help improve efficiency across the department. This opportunity offers a competitive compensation package, premium benefits, incentive opportunities, and relocation assistance for qualified candidates. Key Responsibilities • Lead, support, and mentor CAD/CAM designers and digital team members, • Help manage daily workflow, case assignments, scheduling, and production priorities, • Review digital designs for accuracy, function, fit, and overall quality, • Ensure cases meet internal quality standards and doctor/customer expectations, • Support complex case planning and provide technical guidance to the team, • Help improve CAD/CAM procedures, workflow consistency, and department efficiency, • Troubleshoot digital design, scanning, printing, milling, and software-related issues, • Work with lab leadership and other departments to support smooth production flow, • Monitor department performance and help identify areas for improvement, • Assist with equipment, materials, and resource planning as needed Qualifications • 5–7 years of dental laboratory CAD/CAM experience preferred, • Strong experience with digital dental design workflows, • Proficiency with software and platforms such as 3Shape, Exocad, Meshmixer, desktop scanners, 3D printers, and/or CNC mills, • Prior experience supervising, training, or managing a team preferred, • Strong understanding of dental anatomy, occlusion, case design, and production standards, • Ability to troubleshoot technical issues and support digital production needs, • Strong communication, organization, and leadership skills, • Ability to prioritize deadlines and manage workflow in a busy lab environment, • CDT certification is a plus but not required, • Bachelor’s degree or equivalent experience preferred Compensation & Benefits • $80,000–$100,000 per year, based on experience, • Incentive opportunities available, • Premium benefits package, • Relocation assistance available for qualified candidates Ideal Candidate The ideal candidate is an experienced CAD/CAM dental technician or digital lab leader who enjoys solving technical challenges, supporting team development, and improving digital production processes. This person should be comfortable balancing leadership responsibilities with hands-on technical support when needed.

Job Description RED-Rochester is a multi-utility generation plant and district energy supplier to one of the world’s most comprehensive industrial parks: the Eastman Business Park. Supporting a 1,200-acre campus, RED-Rochester has the utilities, infrastructure, technical services, support services, space and complementary regional resources to benefit a wide range of industry verticals. We are seeking an Control Systems Engineering Intern/COOP who enjoys the challenge of applying controls systems to a utilities infrastructure. Our infrastructure consists of a blend of classic and modern industrial assets and requires a person with an interest in industrial and utility systems – able to work collaboratively with mentors and employees to achieve success. Essential Duties and Responsibilities • This position is part of the I&C group within RED-Rochester. The I&C team is responsible for the installation, repair, maintenance and calibration of all control system devices in each of RED’s utility plants. The team is also responsible for programming and maintenance of the Ovation Distributed Control System (DCS)., • Capital Projects – support the development of business cases, assist the project teams execute the completion of these projects, and take charge of small capital projects supporting the improvement of our systems., • Spend time with RED’s operations group learning the hands-on operation of steam boilers, chillers, turbines, valves, pumps, generators, and more., • Work under the direction of RED’s Controls Engineers to design and implement changes to DCS graphics, DCS logic/programming, and final control elements in the field., • Support “day to day” field work with our instrumentation & controls technicians, learning about the installation, repair, testing and calibration of controls system components., • Develop and document preventative maintenance procedures for control systems and control devices on major pieces of equipment (boilers, chillers, turbines, etc.), • Document existing systems, including by making system diagrams of equipment and piping, drawings of controls cabinets layouts and equipment I/O, etc., • Use the OSISOFT PI data collection system to set up data collection from new sources, analyze data from meters/plant equipment/financial models, set up automated analytics and alarming, and build dashboards for use by others., • With support from RED’s Control Engineers analyze the metering for one of RED’s utility subsystems, troubleshoot individual meters, and identify unmetered consumption. Qualifications: • Currently majoring in Electrical, Computer, Chemical, Industrial, or Mechanical Engineering, or related discipline., • Eagerness to contribute to our team-oriented environment., • Excellent leadership, communication (written and verbal) and interpersonal skills, • Valid driver’s license, • Experience working in a Utilities, Facilities, or Maintenance type role preferred, but not required., • Experience working with Microsoft Visio or AutoCAD preferred, but not required., • Basic programming experience (Java, PowerShell, Python, etc.) preferred, but not required. Work Environment • Work may be performed under extreme weather conditions including hot and cold ambient temperatures. Employee will be required to travel between various buildings and work in a plant environment where there are moderate noise levels. Employee will be expected to wear appropriate company-provided personal protective equipment for each location and/or task. Physical Demands • While performing duties of job, employee will be occasionally required to bend, lift, walk, climb, or carry equipment. Employee must occasionally lift and or move up to 50 pounds.

Role Overview\n \n \nWe are looking for an Electrical and Instrumentation Mechanic to Support our Advanced Material & Chemicals division in Rochester, NY.\n \n \nAs an Electrical and Instrumentation Mechanic you will be responsible for the following job functions: \n \n• Electrician & Instrumentation skilled trade service to provide multi-discipline capability to repair, maintain, install and make improvements on film manufacturing equipment, complex processing equipment, chemical processing equipment, building general systems (includes instrumentation, pneumatics, hydraulics, controls (PLC's & distributed control systems (DCS), and a wide range of electrical components)\n \n• Ability to calibrate process control instruments tight tolerances using sophisticated calibration equipment.\n \n• Ability to achieve a high level of expertise to effectively troubleshoot and repair equipment, including root cause analysis.\n \n• Some experience or expertise in mechanical, piping, HVAC equipment and controls.\n \n• Includes maintenance of motors, breakers, starters, variable speed drives, process controls devices, heat tracing, lighting, etc.\n \n• Calibrate, align and make adjustments with test equipment and measurement equipment.\n \n• Installation of conduit, wiring, switches, relays, lighting, circuit breakers using power tools and hand tools\n \n• Install upgrades to enhance or replace outdated control systems. \n \n• Execute preventive and predictive maintenance programs. \n \n• Data entry and report writing including ISO documentation. \n \n• Working knowledge of Microsoft Office and maintenance software tools.\n \n• Ability to change based on priorities\n \n Requirements:\n \n• Dependable, maintain good attendance\n \n• Maintain a clean work area and operate in a safe manner at all times.\n \n• Detail orientated Team Player\n \n• Strong electrical and/or instrumentation training and demonstrated skills/experience\n \n• Must demonstrate effective analytical troubleshooting skills\n \n• Able to read electrical, instrument and machine drawings\n \n• Able to read/modify PLC programs to troubleshoot equipment problems\n \n• Understanding of new electrical codes for hazardous environments (flammable liquids)\n \n• Ability to work effectively with minimal supervision\n \n• Excellent safety record - places safety and environment as top priority in all work\n \n• Knowledge of Lock Out / Tag Out\n \n• Effective communication skills - daily communications with leaders, maintenance planner, technical staff, engineering and operations as needed.\n \n• Significant walking or other means of mobility.\n \n• Ability to work in a standing position for extended periods of time (up to 8 hours).\n \n• Ability to work off of ladders or scaffolding, in some awkward positions\n \n• Indoor and outdoor work assignments\n \n• Wear protective clothing and/or Personal Protective Equipment required by the work environment or governmental regulations.\n \n Qualifications:\n \n• HS diploma, and a 2-year degree or some level of instrumentation, electrical or demonstrated trade experience.\n \n• Varying schedule to include evenings, holidays, weekends and extended hours as business needs dictate. \n \n EOE Policy Statement:\n \nAll qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or disability.\n \n Estimated Salary: $32.00 - $45.00 \n \n Experience Level: 5-10 Years \n \n Requisition ID: 2131

Job DescriptionDescription: JOB SUMMARY: The Senior Controls Engineer provides technical leadership for the architecture, integration and execution of control systems across multiple projects. This role architects multi-controller systems and cross-cell integration, defines the safety approach and validation method, and sets the architecture that other engineers build within. Given objectives and constraints, the Senior Controls Engineer determines scope and approach and is consulted before commitments are made in their platform or discipline area. The role sets technical direction across projects without supervisory authority, approves deviations from standard, leads customer design review, FAT and SAT, and serves as the named owner of a platform. JOB DUTIES & RESPONSIBILITIES: • Architect multi-controller systems, diagnostics strategy and data flow, • Define the safety approach and validation method for a system, • Design cross-cell and plant-interface networks; own the addressing convention, • Design reusable library objects; set program structure conventions, • Set HMI standards and templates across platforms, • Select and qualify new devices; lead vendor and product evaluations, • Set technical direction across projects for a platform or discipline area; approve deviations from standard, • Review AE design and quote requirements; feed back discrepancies before commitment, • Estimate controls effort and identify technical risk at quote and kickoff, • Lead customer design review, internal FAT, customer FAT and SAT, • Lead and prioritize actions on escalated issues, • Coach Controls Engineer III; develop training content; serve as named platform owner, • Order long-lead items, assign specialty items, and close out punch list and lessons learned, • Travel to customer sites for design review, commissioning readiness and customer acceptance — approximately 20% of time. Requirements: EDUCATION and/or EXPERIENCE: • Bachelor's degree in a related engineering discipline or equivalent experience, required., • 7–10 years in controls engineering, including architecture of multi-controller solutions, • Experience defining diagnostics, telemetry and safety approaches, • Cross-subsystem integration and standards leadership, • Commissioning strategy and readiness leadership, • Vendor evaluation and selection influence, • Proficient across Rockwell, Siemens and at least one SCADA platform SKILLS AND CHARACTERISTICS NECESSARY TO PERFORM THE JOB: • Software Applications Required, • Rockwell Studio 5000, • Siemens TIA Portal, • Rockwell FactoryTalk View ME and SE, • Ignition, • AutoCAD Electrical, • Software Applications Desired, • Emulate3D, • Cognex vision tooling, • Fanuc HandlingTool, RoboGuide and DCS, • Structured languages (C#, Python), • Codes and Standards — working knowledge appropriate to the level, • NFPA 79, • NFPA 70 (National Electrical Code), • NFPA 70E, • UL 508A, • ANSI/RIA R15.06, • ISO 10218 — Industrial Robot Safety Requirements, • ISO 13849 and IEC 62061 — Functional Safety, • System architecture mindset and decision quality, • Sets technical direction across projects without positional authority, • Standards creation and adoption leadership, • Risk management and verification planning, • Cross-discipline influence and alignment; facilitates design and architecture reviews, • Coaching and technical leadership across the team, • Customer-facing technical lead through design review, FAT and SAT MEASUREMENTS OF SUCCESS: • Architectures delivered that other engineers can build within without rework, • Safety approach and validation method defined and demonstrated at acceptance, • Escalated issues resolved and system performance stabilized, • Estimates and risk identification accurate against actual project outcome, • Standards adherence across projects; review findings driven to closure, • Platform ownership discharged — library current and guidance published, • Controls Engineer III engineers coached toward the next level In compliance with pay transparency requirements, the wage range for this role is $138,000 - $155,000 annually. The rate range provided is a general guideline. When extending an offer, Adaptec Solutions considers factors including but not limited to experience and geographic location. Adaptec Solutions also offers a variety of benefits including generous paid time off (PTO), 11 paid company holidays including your birthday, generous health plans, dental and vision insurance, HSA/FSA accounts, generous 401(k) match and immediate vesting, short-term/long term disability coverage and basic life/AD&D insurance and education assistance. Adaptec Solutions, LLC is an equal opportunity organization. We recruit, employ, train, compensate, and promote without regard to race, religion, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, protected veteran status, or any other basis protected by applicable federal, state, or local law.

A growing dental laboratory is seeking an experienced Dental Cad/Cam Manager to lead and support its digital design team. This role is ideal for a strong Cad/Cam professional who combines advanced technical knowledge with leadership, organization, and the ability to guide a team in a fast-paced dental lab environment. The right candidate will oversee digital design workflows, support quality standards, troubleshoot technical issues, and help improve efficiency across the department. This opportunity offers a competitive compensation package, premium benefits, incentive opportunities, and relocation assistance for qualified candidates. Key Responsibilities • Lead, support, and mentor Cad/Cam designers and digital team members, • Help manage daily workflow, case assignments, scheduling, and production priorities, • Review digital designs for accuracy, function, fit, and overall quality, • Ensure cases meet internal quality standards and doctor/customer expectations, • Support complex case planning and provide technical guidance to the team, • Help improve Cad/Cam procedures, workflow consistency, and department efficiency, • Troubleshoot digital design, scanning, printing, milling, and software-related issues, • Work with lab leadership and other departments to support smooth production flow, • Monitor department performance and help identify areas for improvement, • Assist with equipment, materials, and resource planning as needed Qualifications • 5–7 years of dental laboratory Cad/Cam experience preferred, • Strong experience with digital dental design workflows, • Proficiency with software and platforms such as 3Shape, Exocad, Meshmixer, desktop scanners, 3D printers, and/or CNC mills, • Prior experience supervising, training, or managing a team preferred, • Strong understanding of dental anatomy, occlusion, case design, and production standards, • Ability to troubleshoot technical issues and support digital production needs, • Strong communication, organization, and leadership skills, • Ability to prioritize deadlines and manage workflow in a busy lab environment, • Cdt certification is a plus but not required, • Bachelor's degree or equivalent experience preferred Compensation & Benefits • $80,000–$100,000 per year, based on experience, • Incentive opportunities available, • Premium benefits package, • Relocation assistance available for qualified candidates Ideal Candidate The ideal candidate is an experienced Cad/Cam dental technician or digital lab leader who enjoys solving technical challenges, supporting team development, and improving digital production processes. This person should be comfortable balancing leadership responsibilities with hands-on technical support when needed.

Job Description About RED-Rochester RED-Rochester LLC, is the primary utility provider and district energy supplier for the 1,200-acre Eastman Business Park, one of the world’s most comprehensive industrial campuses located in Rochester, NY. RED-Rochester owns and operates a highly reliable and efficient utility infrastructure that delivers a full suite of services—utilizing high pressure industrial boilers and a gas turbine-supporting electricity, steam, chilled water, and other critical utilities across the park. These services are distributed through a dedicated microgrid and industrial systems designed to meet the demands of diverse industrial and commercial tenants. RED-Rochester Mission Statement Through our unwavering commitment to safety, reliability, environmental stewardship, and community, we strive to be a trusted utilities provider that drives sustainable development, powers progress and leads the way towards a greener and brighter future. Position Summary This role is responsible for the operations and maintenance on RED’s industrial water, boilers, compressed air, and steam distribution systems within Eastman Business Park. This would include, but is not limited to starting and stopping equipment, making adjustments as needed to online units both manually and via the distributive controls system (DCS), and unloading chemicals used in water treatment and testing. This role is required to follow and enforce company procedures to maintain a safe workplace and comply with regulatory requirements. Essential Responsibilities • Perform routine boiler room, refrigeration and water treatment systems equipment inspections and performance including documentation of operational data, checking and adjusting of controls on equipment as necessary., • Oversee the proper operation of the water treatment plant, boilers, turbines, and distribution systems with the shift operations teams, ensuring all teams adhere to the proper procedures & guidelines, • Assist with repairs as needed on all equipment and distribution systems piping., • Conduct sampling and testing of chemical treatment systems including the unloading of bulk chemicals., • Provide operating support for equipment shutdowns and startups including securing of equipment using standard LO/TO procedures., • Assist with maintaining equipment in a clean and operable condition., • Assist with the development and updates of standard operating procedures., • Maintenance duties as needed including refrigerant handling, leak repair, pump packing adjustments, etc., • Provide operating support for overhead distribution piping systems., • Other duties as assigned such administrative, proper record keeping, inspections, etc., • Must adhere to all safety protocols and regulations. Experience desired 2 years of experience at lower-level operator/mechanic position, knowledge of refrigeration systems, cooling towers, water treatment plant, piping systems, building structures and steam turbines helpful. Work Environment Location: Eastman Business Park, Rochester, NY Schedule: This role is performed on a rotating shift assignment schedule. The rotation consists of two (2) days (6:00am – 6:00pm) then two nights (6:00pm to 6:00am) followed by four (4) days off. This is a non-exempt hourly position with expected overtime. Setting: Work may be under extreme weather conditions including hot and cold ambient temperatures. Incumbent will be required to travel between various buildings and work in the various plant environment where there is a moderate noise level. Employee is expected to adhere to the personal protective equipment policy for each location they will perform work. Travel: Limited to travel within the park grounds, as required. Physical Demands • While performing duties of job, incumbent is occasionally required to bend, walk, or carry equipment., • Employee must occasionally lift and move up to 50 pounds. Qualifications • Ability to work with all levels of the organization., • Ability to learn DCS (distributive control systems), Ovation control systems for shift operations within a short period after hire., • Must have a valid NYSDOT drivers’ license and proof of insurance. Upon Hire RED-Rochester will assist the selected candidate with obtaining the following licenses and/or certifications: • City of Rochester S-3 Stationary Engineers License within 14 months after starting this position., • City of Rochester R-4 Refrigeration Operators License within 18 months after starting this position., • NYSDOH 2a Water Treatment Operator certification within 16 months after starting this position., • US-EPA Refrigerant Handling Universal License within 12 months after starting this position. Education High school diploma, or GED required. Compensation As required by multiple state pay transparency laws, RED-Rochester provides a reasonable range of compensation for each job posting. Actual compensation is influenced by an array of factors including, but not limited to, skill set, level of experience, and specific office location. The range of starting pay for this role is $25.00 to $43.00 per hour. This position is also eligible to participate in the Company’s annual bonus program of up to 10% of the annualized base salary. Benefits In addition to our competitive compensation practices, we offer a strong benefits package that includes: • A generous time off program, • Upon hire, up to 156 hours of accrued vacation time, • Personal time of 3 days annually, • 10 company-paid holidays, • Up to 10% annual bonus target, dependent upon position. The annual bonus program incorporates both company and individual performance and is designed to reward employees for their contributions throughout the year., • Medical Insurance, Dental Insurance, and Vision Insurance plans, • Company paid Life Insurance/Short Term Disability/Long Term Disability, • Flexible Spending Account (FSA) and Health Spending Account (HSA) options, • 401(k) with immediate vesting and a competitive company match, • Educational assistance program RED-Rochester is committed to diversity in its workforce including Equal Opportunity Employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, and/or veteran status.

Depaul Neighborhood Of The Arts Apartment Treatment Program.The DePaul Neighborhood of the Arts (NOTA) Apartment Treatment Program is now hiring a full-time Residential Counselor! Under the direction of the Residence Manager, this role provides care, rehabilitative training, support, and supervision

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Administrative Assistant admin experience not required.Remote Work From Home Administrative Assistant Admin - Part Time Market Research Panelists

Fresenius Medical Care - 1570 Long Pond Road - Responsibilities: Answering telephone and routing calls; Greet patients and guests at reception; Maintain filing systems and databases; Prepare and process admissions, records, and referrals; Coordinate scheduling and travel for patients.

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Administrative Assistant admin experience not required.Remote Work From Home Administrative Assistant Admin - Part Time Market Research Panelists

Take the next step as our new Kelly Services Administrative Assistant to perform daily responsibilities with dedication.Provide excellent interactions with customers and colleagues.Provide excellent interactions with customers and colleagues.Perks include competitive pay, flexible schedules, hands-o

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Administrative Assistant admin experience not required.Remote Work From Home Administrative Assistant Admin - Part Time Market Research Panelists

Your primary responsibilities will include: -Calendar Management -Communications and problem solving with insurance companies and clients(aka: patient), -Account receivables/payables -Handling of payments in cash or credit card -various other Senior Executive Administrative duties.Most important

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Administrative Assistant admin experience not required.Remote Work From Home Administrative Assistant Admin - Part Time Market Research Panelists

As a Virtual Administrative Assistant, you will be responsible for providing remote administrative support, including: provide administrative support remotely.Duties and responsibilities can change depending on business needs.

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Administrative Assistant admin experience not required.Remote Work From Home Administrative Assistant Admin - Part Time Market Research Panelists

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Administrative Assistant admin experience not required.Remote Work From Home Administrative Assistant Admin - Part Time Market Research Panelists

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Administrative Assistant admin experience not required.Remote Work From Home Administrative Assistant Admin - Part Time Market Research Panelists

HR Administrative Assistant Job Duties: Supports human resources department by screening, testing, and interviewing applicants.Prepares payroll by calculating pay, distributing checks, and maintaining payroll records.P

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Administrative Assistant admin experience not required.Remote Work From Home Administrative Assistant Admin - Part Time Market Research Panelists

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Administrative Assistant admin experience not required.Remote Work From Home Administrative Assistant Admin - Part Time Market Research Panelists