Trabajos engineering technician en Wayne, New JerseyCrear alertas

Job Description Wiring Technician Trainee Why This Role Is Different: At EPD, quality is not an afterthought. We take pride in building panels that are accurate, organized, and professionally assembled for critical automation and control applications. This is a place where your attention to detail and pride in craftsmanship are genuinely valued - and where the work you produce matters to industries and people who depend on it every day. What You'll Do: • Install, route, terminate, and label wiring and electrical components within custom industrial control panels, • Read and interpret electrical schematics, wiring diagrams, panel layouts, and assembly drawings, • Verify components and wiring against engineering documentation and bills of material, • Maintain neat, organized, and professional wire routing and cable management practices, • Perform thorough self-inspections throughout assembly to ensure accuracy and workmanship, • Identify and communicate drawing discrepancies, material shortages, or quality concerns, • Support panel testing, troubleshooting, and final assembly activities, • Collaborate with engineers, assemblers, and production personnel to meet project schedules, • Contribute to continuous improvement initiatives focused on safety, quality, and efficiency What You'll Bring: Required: • 1+ years of experience in electrical assembly, panel wiring, industrial manufacturing, or related field, • Ability to read and interpret electrical schematics and wiring diagrams, • Experience with electrical assembly tools including wire strippers, crimpers, cutters, and hand tools, • Strong mechanical aptitude and exceptional attention to detail, • Ability to work independently and collaboratively as part of a team Preferred: • Experience as an industrial control panel wireperson, • Familiarity with UL 508A panel construction practices, • Vocational, technical school, or electrical trade training, • Experience in custom engineered-to-order manufacturing environments, • Basic troubleshooting experience with electrical control systems What Success Looks Like: You take ownership of your work and hold yourself to the highest standards. You produce clean, organized, and accurate wiring that reflects professional craftsmanship and genuine pride in the finished product. As our wireperson, you understand that every panel you build represents EPD's reputation for quality and customer satisfaction - and you take that responsibility seriously. How This Role Embodies Our Core Values: Customer Focus: Your precision craftsmanship directly supports customers who depend on our panels for critical operations - from pharmaceutical manufacturing to energy distribution. Collaboration: You'll work alongside engineers, assemblers, and production teams who share your commitment to quality and on-time delivery. Innovation: You'll contribute to continuous improvement initiatives that make our manufacturing processes safer, more efficient, and more precise. Integrity: Your commitment to accuracy and self-inspection builds trust with customers who rely on our systems for critical operations. Passion: You bring dedication and strong work ethic to every panel you build, knowing your craftsmanship powers industries that matter. What We Offer: · Competitive hourly compensation, $25/hr. based on experience · Comprehensive benefits including health, dental, and vision insurance · 401(k) with company match · Employee Stock Ownership Plan (ESOP) - you'll own a piece of the company · Stable, long-term career opportunity with a 45+ year old company · Opportunity to continuously develop your skills on complex projects Schedule & Location: · 100% on-site in Bloomingdale, NJ · 7:00 AM start time · Full-time position Ready to Build Systems That Matter? If you're a skilled wireperson who takes pride in precision work and wants to be part of a team whose craftsmanship powers critical infrastructure and saves lives, we want to hear from you! Join EPD and bring your electrical expertise to a company where quality, professionalism, and continuous improvement are at the heart of everything we do. Control Associates is an Equal Opportunity Employer committed to diversity in the workplace. Control Associates participates in E-Verify. Click here to view E-Verify Participant \nCompany Description Build Systems That Power Critical Industries and Save Lives Electronic Power Designs (EPD), a Control Associates company, is seeking a skilled and detail-oriented Industrial Control Panel Wireperson to join our manufacturing team in Bloomingdale, NJ. EPD brings over 45 years of precision manufacturing excellence to the Control Associates portfolio - our industrial control panels power everything from natural gas pressure systems throughout Manhattan to life-saving medical technology. When you build with us, your craftsmanship has real impact. Build Systems That Power Critical Industries and Save Lives\nElectronic Power Designs (EPD), a Control Associates company, is seeking a skilled and detail-oriented Industrial Control Panel Wireperson to join our manufacturing team in Bloomingdale, NJ. EPD brings over 45 years of precision manufacturing excellence to the Control Associates portfolio - our industrial control panels power everything from natural gas pressure systems throughout Manhattan to life-saving medical technology. When you build with us, your craftsmanship has real impact.

Our client, a US Fortune 250 company and global medical technology corporation serving customers across clinical laboratories, healthcare research, and the pharmaceutical industry, seeks an accomplished R&D Engineering Technician I – Mechanical / Biomechanical Engineering. Position: R&D Engineering Technician I Location: Franklin Lakes, NJ 07417 Duration: 6+ month contract with possible extension Pay Rate: $27–$32/hour, depending on experience Work Arrangement: On-site Relocation Expenses/Assistance: NO NO Visa Sponsorship / No H1Bs / No C2Cs Position Overview The R&D Engineering Technician I will support new product and technology development through experimental planning, feasibility testing, data analysis, laboratory testing, and technical reporting. This role is well suited for a Mechanical Engineering or Bio-Mechanical Engineering graduate interested in hands-on R&D, product development, laboratory testing, and medical device/medical technology engineering. Key Responsibilities • Independently plan and perform experiments supporting new product or technology feasibility testing., • Critically analyze data generated from experiments and interpret results., • Report experimental findings to R&D management and peers., • Identify and communicate product development implications arising from experimental results., • Prepare technical reports as required., • Maintain scientific equipment to support technical objectives and meet regulatory and governance requirements., • Maintain Good Laboratory Practices (GLP) consistent with product development objectives and regulatory guidelines., • Interface with engineering teams to support experimental design., • Perform testing of experimentally produced products as required. Education Requirement • Bachelor’s degree in Mechanical Engineering or Bio-Mechanical Engineering Ideal Background Candidates with academic, internship, laboratory, or professional exposure related to Mechanical Engineering, Biomechanical Engineering, R&D, product development, experimental testing, feasibility testing, data analysis, laboratory equipment, or GLP environments may find this opportunity especially relevant. Interested candidates: Apply with an updated resume highlighting relevant engineering, laboratory, experimental testing, and product development experience. Recruiter Contact Info Sajag Bhardwaj Email: sajag.bhardwaj@ameritconsulting.com _ I'd love to talk to you if you think this position is right up your alley, and assure prompt communication, whichever direction. If you're looking for rewarding employment and a company that puts its employees first, we'd like to work with you. Company Overview: Amerit Consulting is a nationwide staffing and consulting firm supporting Fortune 500 clients across healthcare, technology, engineering, and professional services. With over 2,000 employees across 47 states, Amerit specializes in contract, temporary, and direct hire staffing solutions. Amerit Consulting provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants, with criminal histories, are considered in a manner that is consistent with local, state and federal laws.

Only on W2 - No C2C Title: Mechanical Engineering - Technician 1 Contract Duration: 12 Months Contract Location: Franklin Lakes, NJ Technical Skills Must Have • Instron Axial and Torsional Testing Equipment experience Nice To Have • Bluehill Universal Job Description • On site pay, • This position is for a Second Shift: 2:00PM - 10:30PM on site Job Summary: • Reporting to a supervisor/manager, the Lab Technician 1 brings technical skills and knowledge to support: test lab daily activities; equipment qualification; test method validation (TMV) development; and lab engineering projects., • Performs bench-level engineering tests for design verification (DV), stability, feasibility, and test method developments (TMD)., • Works under supervision to complete assignments., • Supports review of test requests to ensure accurate completion., • Supports lab for TMV's. Job Responsibilities: (Primary Duties, Roles, and/or Authorities) • Executes minimally complex test requests with moderate assistance. Developing on all lab testing., • Handles minimally complex problems with moderate supervisor assistance., • Works with moderate oversight/supervision to complete minimally complex projects., • Supports equipment qualification (IQ, OQ) and TMV's development., • Supports TMD and Ver/Val teams., • Troubleshoots to a solution inconsistency on test needs/requests with requestor., • Responsible for maintaining good documentation practice (GDP), good laboratory practices (GLP) and supports compliance with GLP., • Supports efforts to create tools for process simplification of testing lab operation Education and Experience: • Bachelor of Science (BS) Degree and minimum of 0 years of experience in a regulated industry / laboratory setting, Or Associates in Applied Science (AAS) and minimum of 0 years of experience in a regulated industry / laboratory setting, Or High School Diploma and minimum of 4 years of experience in a regulated industry / laboratory setting. Knowledge and Skills: • Proficient communication skills (written/verbal). Physical Demands: (if applicable) • Standing while performing task., • Able to lift 50Lbs. Work Environment: (if applicable) • Laboratory environment using personal protective equipment (PPE), where may encounter/use chemical or human body fluid for testing.

Education and Experience: • Bachelor of Science (BS) Degree and minimum of 0 years of experience in a regulated industry / laboratory setting, Or Associates in Applied Science (AAS) and minimum of 0 years of experience in a regulated industry / laboratory setting, Or High School Diploma and minimum of 4 years of experience in a regulated industry / laboratory setting. Job Summary: • Reporting to a supervisor/manager, the Lab Technician 1 brings technical skills and knowledge to support:, • test lab daily activities; equipment qualification; test method validation (TMV) development; and lab engineering projects., • Performs bench-level engineering tests for design verification (DV), stability, feasibility, and test method developments (TMD)., • Works under supervision to complete assignments., • Supports review of test requests to ensure accurate completion., • Supports lab for TMV’s. Job Responsibilities: (Primary Duties, Roles, and/or Authorities) • Executes minimally complex test requests with moderate assistance. Developing on all lab testing., • Handles minimally complex problems with moderate supervisor assistance., • Works with moderate oversight/supervision to complete minimally complex projects., • Supports equipment qualification (IQ, OQ) and TMV’s development., • Supports TMD and Ver/Val teams., • Troubleshoots to a solution inconsistency on test needs/requests with requestor., • Responsible for maintaining good documentation practice (GDP), good laboratory practices (GLP) and supports compliance with GLP., • Supports efforts to create tools for process simplification of testing lab operations

Field Service Technician — Livingston, NJ (Hybrid) We are excited to announce that Nanion Inc. USA is hiring! We’re looking to hire a Field Service Technician (FST) to support the growing demand for Nanion products and to provide premium customer service. About the role This is a lab-based technical role. You'll spend most of your time in our Livingston facility repairing and refurbishing instruments, supporting our field service engineers remotely while they're on-site with customers, and managing spare parts to keep our instruments running. Occasional travel, typically for preventive maintenance visits, rounds out the job, but this is not a road warrior position. If you like solving problems at the bench, owning your work, and being the person the field team calls when they're stuck, this is a good fit. What you'll do • Diagnose, repair, and refurbish instruments, modules, and electronic circuit boards in our Livingston lab, • Provide remote technical support by phone, email, and video to customers and to our field service engineers, • Manage spare parts: track inventory, process return merchandise authorizations (RMAs), prepare and ship parts and loaner units, • Perform preventive maintenance and occasional on-site service at customer sites (roughly 15–25% travel, mostly domestic), • Document all service work accurately in service reports, logs, and our ticketing system, • Support instrument setup, testing, and validation in our demo lab, • Help maintain service documentation and troubleshooting guides What we're looking for • An associate’s or bachelor’s degree in electronics, electrical engineering, biomedical engineering, or equivalent hands-on experience, • At least one year of experience servicing electronic, electromechanical, or scientific instrumentation, • Comfortable with schematics, multimeters, oscilloscopes, and board-level troubleshooting, • Strong written and verbal communication skills in English — you'll be documenting your work and walking engineers through fixes remotely, • Organized and detail-oriented, particularly around parts tracking and service records, • Able to work independently and as part of a small, collaborative, multicultural team, • Valid driver's license and passport, with the ability to travel occasionally, • Must be authorized to work in the US Nice to have • Experience with laboratory or analytical instrumentation (electrophysiology, microscopy, liquid handling, robotics), • Familiarity with fluidics, pneumatics, or precision motion systems, • Experience with a customer relationship management (CRM) system or field service ticketing platform To apply Send your CV and a brief cover note to leo.morada@naniontech.com.

Help Desk Technician L1 – MSP • Location: Fair Lawn, NJ, • Compensation: $40,000–$55,000 base + bonus, • Schedule: Hybrid – 4 days onsite / 1 day remote, • Employment: Full-Time, Direct Hire Overview A fast-growing Managed Service Provider in Northern New Jersey is seeking a Help Desk Technician L1 to join its expanding Service Desk team. The company supports mid-sized businesses throughout New York City and Northern New Jersey and has experienced significant year-over-year growth. This is an excellent opportunity for an early-career IT professional who already has a solid technical foundation and wants a structured path into Level 2 engineering. The company provides formal onboarding, senior-engineer mentorship, certification support, and increasing technical responsibility as you progress. Responsibilities • Serve as the first point of contact for client support requests via phone and email., • Troubleshoot and resolve workstation, login, password, MFA, and common application issues., • Manage basic user administration within Active Directory and Entra ID., • Support Microsoft 365, including permissions, licensing, and distribution lists., • Perform workstation deployments, configurations, and troubleshooting., • Troubleshoot Microsoft Office, Adobe, and other common business applications., • Configure and troubleshoot network printers, including scan-to-email and scan-to-folder., • Troubleshoot basic Wi-Fi, DNS, DHCP, and network connectivity issues., • Utilize PSA and RMM platforms to manage tickets, monitor alerts, and support client devices., • Use Microsoft Intune to review devices, run scripts, and check compliance., • Maintain accurate ticket notes and technical documentation., • Properly escalate advanced networking, server, security, and infrastructure issues to L2/L3 engineers., • Work toward independently managing approximately 8–12+ tickets per day after completing the initial training period. Qualifications • 1–2+ years of IT support experience preferred., • MSP or fast-paced corporate Help Desk experience strongly preferred., • Hands-on experience with Microsoft 365 and Active Directory., • Familiarity with Entra ID and Group Policy., • Basic Windows Server support experience., • Experience with workstation deployments and rollouts., • Foundational networking knowledge, including DNS, DHCP, SMB, and basic connectivity troubleshooting., • Exposure to PSA, RMM, and/or Intune platforms is a plus., • Strong troubleshooting and problem-solving ability., • Strong organizational, documentation, and time-management skills., • Ability to take ownership of issues and work effectively within a team., • High school diploma or higher., • Certifications are not required. 90-Day Ramp-Up Weeks 1–4: Structured technical training, shadowing senior engineers, and learning client environments and internal processes. Week 6+: Begin independently owning the support queue, handling approximately 8–12+ tickets per day while continuing to receive mentorship and escalation support from L2/L3 engineers. Benefits & Perks • 100% company-paid health insurance, • Dental and vision coverage, • Generous PTO, • 401(k) with Safe Harbor match, • $50/month cell phone reimbursement, • Certification reimbursement, • Internal technical training program, • Structured onboarding and mentorship, • Clear career path from L1 → L2 Engineer

Job Title: Quality Assurance Technician III Location: Parsippany, NJ 07054 Duration: 6 Months Job Type: Temporary Assignment Work Type: Onsite Shift: 07:00 AM To 04:00 PM Pay Rate: $ 35.00-35.00/ Hr Overview: TekWissen is a global workforce management provider headquartered in Ann Arbor, Michigan that offers strategic talent solutions to our clients world-wide. Our client is a top manufacturer of roofing and waterproofing solutions in North America, operating 30 locations throughout the U.S. They offer a range of products for both commercial and residential roofing, along with pavement coatings. Job Description At Client, we cover more than buildings. We cover each other. No matter what role, tenure, or track, under this roof you are empowered to be there for your teammates, your customers, and especially your community. Under this roof, we don’t back down from hard work– we support one another in pursuit of something bigger. We define the future while leading the present. And under this roof, we own our opportunities. Becoming the market leader only happens when everyone feels they have the opportunity, and the support, to thrive. We are Client. And under this roof, we protect what matters most. The Technician III is responsible for claim evaluations and conducts various testing activities and analysis on sample material. Communicates results effectively and reports meaningful and unbiased conclusions based on evaluations. Conducts specific activities in accordance with established laboratory practices and procedures. Leads and contributes improvements to the lab evaluation processes, Job Safety Analysis, and Standard Operating Procedures. Leads laboratory maintenance and calibration of equipment. Leads and supports training for new hires. Assures all activities are performed. Essential Duties Claims Evaluation: • Lead claim evaluations to determine manufacturing and performance characteristics., • Conduct testing per established protocols and provide accurate data., • Assist in making data-driven decisions on lab dispositions., • Review and improve process flows on a continuous basis per field feedback., • Improve lab efficiency through monitoring of claims influx and prioritizing work to improve and/or meet lab evaluation metrics., • Strong practical knowledge of key product lines, lab evaluation processes, products specifications and application instructions., • Assist in root cause analysis investigations, and report findings in a clear meaningful format., • Participate in problem solving teams, • Continue to build partnerships across different teams such as warranty, field services, R&D, and manufacturing plants., • Familiar with various manufacturing processes of different products., • Familiar with quality fundamentals, • Knowledge of engineering/science fundamentals Lab Functionality and Maintenance: • Lead lab maintenance and equipment calibration program., • Perform preventive maintenance and calibration of equipment on a predetermined frequency., • Keep accurate records and documentation., • Learn and develop new test methods, SOPs and JSAs., • Assist supervisor to organize daily lab work flow., • Train new hires, develop, mentor, and provide guidance to junior technicians., • Plans and executes assigned projects and prioritizes tasks though time management system., • Coordinate the use of other resources (both internal and external) in order meet project goals and timelines. Safety • Assure all activities are performed safely per established safety guidelines., • Maintain work area in a safe, clean, and orderly fashion on a daily basis following 5S guidelines., • Complete monthly safety training., • Contribute to Job Safety Analysis and Standard Operating Procedure development., • Champion safety activities, and lead housekeeping., • Knowledge of Safety precautions, health hazards, SDS forms. Qualifications Required • Associate’s Degree in relevant technical field paired with 2+ years of practical, industry-related experience OR, • Bachelor’s Degree in relevant technical field paired with 2+ years of practical, industry-related experience is preferred, • Proven track record (2–5 years) in a manufacturing or R&D lab setting. Experience navigating quality control, analytical testing, or product development within the roofing or construction materials sector is highly desirable. General Knowledge, Skills and Abilities • Excellent interpersonal skills, • Strong attention to detail, • Ability to handle multiple projects simultaneously, • Ability to work as a team player, • Technical Knowledge, Skills and Abilities, • Entry to Intermediate Excel skills, • Strong knowledge of roofing products and installation instructions, • Familiar with standard Client processes, standards, products specifications TekWissen® Group is an equal opportunity employer supporting workforce diversity.

Client Overview Our client is a company that has been a local manufacturer, running a fast-paced, high-volume plant for over 50 years. They are currently looking to add a Maintenance Supervisor to their team. They are very people-focused and boast long-term tenure among many employees. This is a highly regulated environment, operating 24/7 with one other U.S.-based location. Salary/Hourly Rate $100k - $115k plus Bonus Position Overview The Maintenance Supervisor will coach and guide the Maintenance Technicians and work shoulder-to-shoulder with them on the plant floor. This is not a desk job. Expect to spend at least half your time out at the machines, diagnosing faults, demonstrating repair techniques, and showing technicians how to solve problems themselves. You will report to the Engineering Manager and be the day-to-day leader of the maintenance crew. Your success will be measured by how well the team performs: their skills, their confidence, their safety habits, and how reliably the equipment runs because of them. The best fit is someone who gets as much satisfaction from a Technician's first solo fix as from fixing the machine themselves. Responsibilities Of The Maintenance Supervisor • Run the Maintenance team day-to-day: assign work, set priorities, and keep everyone clear on what matters most each shift., • Teach on the floor and use real breakdowns as training moments, walking technicians through your reasoning rather than simply fixing the issue., • Build and run a cross-training plan so Technicians grow across electrical, mechanical, pneumatic, hydraulic, and controls work., • Provide regular, honest feedback, recognize strong performance, and address concerns directly and fairly., • Mentor newer Technicians and prepare high performers for increased responsibility., • Build a culture of accountability where employees take pride in completing work correctly and documenting it properly., • Troubleshoot and repair production equipment, including motors, drives, sensors, PLC and control systems, and pneumatic and hydraulic circuits., • Support the upkeep of coating, laminating, converting, web-handling, winding and unwinding, and drying equipment., • Respond quickly to breakdowns, establish repair plans, and work alongside the team to restore production., • Investigate root causes of recurring failures and implement long-term solutions., • Balance emergency repairs, planned maintenance, and projects against production schedules and available resources., • Develop and enhance preventive maintenance programs to reduce unplanned downtime., • Partner with Production, Engineering, and outside contractors to plan shutdowns, repairs, and upgrades., • Maintain accurate work orders, equipment histories, and maintenance records within the maintenance management system., • Lead by example regarding OSHA and company safety standards, including Lockout/Tagout, Pre-Job Briefs, and Integrated Risk Assessments., • Coach Technicians to work safely at all times, especially during high-pressure equipment breakdown situations. Required Experience/Skills For The Maintenance Supervisor • Two or more years of experience supervising or leading a team, formally or as a Lead Technician., • Five or more years of industrial maintenance experience in a manufacturing environment., • Strong electro-mechanical troubleshooting and repair skills across motors, drives, sensors, controls, pneumatics, and hydraulics., • Proven ability to teach technical skills and explain complex problems clearly to individuals with varying levels of experience., • Ability to read and interpret electrical schematics, mechanical drawings, and equipment manuals., • Experience building or managing preventive maintenance programs., • Sound judgment and a calm, practical approach to troubleshooting and problem-solving., • Strong communication and organizational skills, along with working knowledge of Microsoft Office., • Comfortable being physically active on the production floor, including standing, walking, climbing, kneeling, working from ladders and elevated platforms, and safely using hand and power tools., • Flexibility to work scheduled shifts, overtime, weekends, and occasional emergency call-ins. Preferred Experience/Skills For The Maintenance Supervisor • Experience within a continuous-process manufacturing environment., • Experience with AC/DC drives and motor control systems., • Experience installing power and control circuits., • Familiarity with combustion systems., • Knowledge of predictive maintenance and reliability-centered maintenance practices., • Hands-on experience using a CMMS., • Experience formally training, mentoring, or developing Technicians. Education Requirements • High school diploma or equivalent is required., • Technical school coursework, an apprenticeship, or certification in industrial maintenance, electrical, or mechanical disciplines is preferred. Benefits • Client-provided benefits available, upon eligibility.

IT Help Desk Technician (MSP) Location: Fair Lawn, NJ Work Model: Hybrid, 4 days onsite and 1 day remote after 90 day ramp up period Salary: $45,000 to $55,000 YOUR NEXT STEP TOWARD LEVEL 2 We are a fast-growing Managed Services Provider hiring an IT Help Desk Technician to support users across multiple small and mid-sized business environments. This role is ideal for someone with a strong IT foundation who wants to sharpen their troubleshooting skills, work with modern Microsoft technologies, and move toward a Level 2 engineering path. You will receive structured onboarding, mentorship from experienced engineers, and hands-on exposure to Microsoft 365, Active Directory, Entra ID, Intune, networking, RMM tools, and client infrastructure. The environment is fast paced, collaborative, and built for someone with previous MSP experience who can learn quickly and take on more technical responsibility over time. WHAT YOU WILL DO • Serve as the first point of contact for support requests by phone and email, • Troubleshoot Windows devices, login issues, passwords, MFA, Microsoft 365, Office, Adobe, printers, and common business applications, • Add, modify, and disable users in Active Directory and Entra ID, • Support Microsoft 365 licensing, permissions, distribution lists, and user administration, • Troubleshoot Wi-Fi, DNS, DHCP, SMB, connectivity, and other basic network issues, • Configure printers, scan to email, and scan to folder, • Use PSA, RMM, and Intune tools to monitor alerts, run scripts, review devices, and track ticket activity, • Maintain accurate ticket notes, documentation, and knowledge base records, • Escalate complex networking, security, server, and infrastructure issues with clear technical context WHAT WE ARE LOOKING FOR • 1 to 2+ years of IT support experience, • MSP experience required, • Strong troubleshooting instincts and the ability to work through issues logically, • Foundational knowledge of DNS, DHCP, SMB, Wi-Fi, and basic networking, • Familiarity with Microsoft 365, Active Directory, Entra ID, or Intune, • Comfortable working in a ticket-driven, SLA-focused environment, • Strong communication, organization, and documentation skills, • Ambitious, coachable, and motivated to grow into a Level 2 engineering role WHY THIS ROLE STANDS OUT • Clear growth path toward Level 2, • Structured onboarding and internal training, • 100% company-paid Health Insurance, • Dental and Vision coverage, • 401(k) with Safe Harbor match, • Generous PTO, • $50 monthly phone reimbursement, • Certification reimbursement, • Exposure to Microsoft cloud, networking, security, automation, and MSP technologies, • Join a rapidly growing MSP with a strong track record of advancement

About the Role International Delights is building a world-class, multi-asset maintenance program across our production, facilities, and fleet operations. We are looking for a Maintenance Manager to own the site’s maintenance performance end-to-end — leading Team Leaders and technicians, and driving the transition from a reactive to a proactive, planned and predictive maintenance culture. This role is the accountable owner of the site’s core maintenance KPIs — safety, downtime, MTTR, MTBF, PM compliance, and cost — and reports directly to the Director of Maintenance and Engineering as a key partner in executing the 24-month reliability roadmap. It is a visible, high-impact position with a clear development path toward Director-level responsibility. What You’ll Do Performance & Reliability • Own the site’s maintenance KPI scorecard — safety incidents, unplanned downtime, MTTR, MTBF, PM compliance, backlog, and maintenance cost — setting targets, driving corrective action when metrics miss, and reporting performance to plant and maintenance leadership on a regular cadence, • Own day-to-day maintenance of all bakery production lines — mixing, makeup, proofing, ovens, cooling, lamination, and packaging — so scheduled production is delivered at target throughput, yield, and food-safety standards, • Analyze downtime, failure, and CMMS data to identify systemic reliability issues and sponsor root cause and corrective action initiatives, • Partner with the Maintenance Planner and reliability resources to mature the site across the four-tier model: reactive, preventive, predictive, and RCM Leadership & Development • Lead, develop, and hold accountable 4 Team Leaders and the technician workforce across shifts A–D, setting priorities and resolving cross-shift conflicts, • Develop the technician bench with the Maintenance Trainer — own the skills matrix, training plan, and succession planning across the maintenance organization, • Translate the site’s 24-month maintenance roadmap into department-level goals, staffing plans, and daily execution Safety & Food Safety • Own safety performance within maintenance — LOTO, machine guarding, confined space, arc flash, and hot work — and lead incident investigations through to closure, • Ensure all work meets GMP, HACCP, allergen-changeover, and SQF requirements; own food-safe repair practices including food-grade lubricants, no-loose-hardware discipline, and post-repair sanitation sign-off, • Own the performance, upkeep, and regulatory compliance of refrigeration systems and facility/building infrastructure, including ammonia and refrigerant regulations [and PSM/RMP program elements] and applicable building codes Planning & Execution • Review and commit to the weekly maintenance schedule developed by the Maintenance Planner, who reports to the Director of Maintenance and Engineering — validate priorities, assign crew capacity, and protect PM windows around the bake schedule, • Partner with Production on changeovers, sanitation windows, and holiday bake ramps, • Drive CMMS adoption and data integrity across the department to support KPI reporting and planning decisions Cost & Asset Stewardship • Manage the maintenance department budget — labor, contractor spend, and parts/MRO inventory — and provide input on capital projects, • Own contractor and vendor relationships supporting maintenance execution, including scope, performance, and cost management, • Own maintenance, inspection, and compliance for site fleet assets — powered industrial trucks, yard equipment, and [delivery vehicles] — including operator inspection programs, OSHA PIT and applicable DOT requirements, service contracts, and replace-versus-repair decisions. What You Bring Required • 10+ years of industrial maintenance experience, including 5+ years in a maintenance management role, • Proven track record owning and improving maintenance KPIs — safety, downtime, MTTR, MTBF, PM compliance — in a manufacturing environment, • Strong working knowledge of mechanical, electrical, pneumatic, hydraulic, and PLC/controls systems, • Deep experience with CMMS platforms, including KPI dashboards, PM program build-out, and data-driven decision-making, • Demonstrated ability to build and lead multi-level teams across shifts, • Strong financial acumen — budget ownership, labor planning, and cost control, • Excellent communication and influencing skills, comfortable presenting KPI performance to plant leadership Preferred • Food or beverage manufacturing experience, • Ammonia refrigeration experience, including participation in or ownership of a PSM program, • SQF, BRC, or equivalent GFSI audit experience, • Fleet or powered industrial truck maintenance experience, including OSHA PIT and DOT compliance programs, • Reliability credentials or framework experience (CMRP, SMRP, Uptime Elements), • Bachelor’s degree in Engineering or a related technical field; equivalent experience will be considered Schedule & Work Environment • Primary schedule is [day shift, Monday–Friday], supporting a continuous operation running shifts A–D, • On-call rotation and occasional weekend, holiday, or off-shift coverage required during peak bake ramps, planned shutdowns, and major breakdowns, • Plant floor environment with temperature variation near ovens and coolers, elevated noise, and lifting up to [XX] lbs; PPE and GMP requirements apply at all times What Success Looks Like • Measurable, sustained improvement in downtime, MTTR, and MTBF against 24-month targets, • Strong safety performance and full compliance across the maintenance department, • High PM compliance and a shrinking, well-managed maintenance backlog, • A capable, accountable leadership bench across Team Leaders and senior technicians, • A demonstrated shift from reactive maintenance toward a planned, predictive, and cost-disciplined program International Delights is an equal opportunity employer.

Job Title - Quality Assurance Laboratory Technician III The Technician III is responsible for claim evaluations and conducts various testing activities and analysis on sample material. Communicates results effectively and reports meaningful and unbiased conclusions based on evaluations. Conducts specific activities in accordance with established laboratory practices and procedures. Leads and contributes improvements to the lab evaluation processes, Job Safety Analysis, and Standard Operating Procedures. Leads laboratory maintenance and calibration of equipment. Leads and supports training for new hires. Assures all activities are performed. Essential Duties Claims Evaluation: • Lead claim evaluations to determine manufacturing and performance characteristics., • Conduct testing per established protocols and provide accurate data., • Assist in making data-driven decisions on lab dispositions., • Review and improve process flows on a continuous basis per field feedback., • Improve lab efficiency through monitoring of claims influx and prioritizing work to improve and/or meet lab evaluation metrics., • Strong practical knowledge of key product lines, lab evaluation processes, products specifications and application instructions., • Assist in root cause analysis investigations, and report findings in a clear meaningful format., • Participate in problem solving teams, • Continue to build partnerships across different teams such as warranty, field services, R&D, and manufacturing plants., • Familiar with various manufacturing processes of different products., • Familiar with quality fundamentals, • Knowledge of engineering/science fundamentals Lab Functionality and Maintenance: • Lead lab maintenance and equipment calibration program., • Perform preventive maintenance and calibration of equipment on a predetermined frequency., • Keep accurate records and documentation., • Learn and develop new test methods, SOPs and JSAs., • Assist supervisor to organize daily lab work flow., • Train new hires, develop, mentor, and provide guidance to junior technicians., • Plans and executes assigned projects and prioritizes tasks though time management system., • Coordinate the use of other resources (both internal and external) in order meet project goals and timelines. Safety • Assure all activities are performed safely per established safety guidelines., • Maintain work area in a safe, clean, and orderly fashion on a daily basis following 5S guidelines., • Complete monthly safety training., • Contribute to Job Safety Analysis and Standard Operating Procedure development., • Champion safety activities, and lead housekeeping., • Knowledge of Safety precautions, health hazards, SDS forms. Qualifications Required Associate’s Degree in relevant technical field paired with 2+ years of practical, industry-related experience OR Bachelor’s Degree in relevant technical field paired with 2+ years of practical, industry-related experience is preferred Proven track record (2–5 years) in a manufacturing or R&D lab setting. Experience navigating quality control, analytical testing, or product development within the roofing or construction materials sector is highly desirable. General Knowledge, Skills and Abilities Excellent interpersonal skills Strong attention to detail Ability to handle multiple projects simultaneously Ability to work as a team player Technical Knowledge, Skills and Abilities Entry to Intermediate Excel skills Strong knowledge of roofing products and installation instructions Familiar with standard processes, standards, products specifications Travel Requirements: 5%

Position Overview We are seeking a hands-on Maintenance Supervisor to lead our Maintenance Team in a high-volume coating, laminating, and converting manufacturing facility. This is a working supervisory position requiring strong electro-mechanical troubleshooting and repair skills. The Maintenance Supervisor will report directly to the Engineering Manager and supervise a team of Maintenance Technicians. Working alongside the team, the Maintenance Supervisor will provide daily direction, prioritize maintenance activities, respond to equipment breakdowns, and improve equipment reliability. The successful candidate will combine strong technical skills with the ability to lead, develop, and hold a maintenance team accountable. Key Responsibilities • Provide daily leadership and direction to Maintenance Technicians., • Prioritize maintenance activities based on production needs, equipment condition, safety, and available resources., • Work hands-on with technicians to troubleshoot and repair production equipment., • Troubleshoot electrical, mechanical, pneumatic, hydraulic, motor, drive, sensor, and control-system issues., • Support maintenance of coating, laminating, converting, web-handling, winding/unwinding, drying, and related process equipment., • Coordinate maintenance activities with Production, Engineering, and outside vendors., • Maintain accurate maintenance records and work orders using the company’s maintenance management system., • Ensure full compliance with OSHA and company safety policies, including proper Lockout/Tagout procedures, Pre-Job Briefs and Integrated Risk Assessments., • Train, coach, and develop Maintenance Technicians through hands-on instruction and cross-training. Required Qualifications • High school diploma or equivalent., • Two or more years of supervisory experience., • Five or more years of industrial maintenance experience in a manufacturing environment., • Strong electro-mechanical troubleshooting and repair experience., • Experience with industrial electrical systems, motors, drives, sensors, controls, pneumatics, and hydraulics., • Ability to read electrical schematics, mechanical drawings, and equipment manuals., • Experience implementing preventive maintenance programs., • Strong troubleshooting, problem-solving, and decision-making skills., • Ability and willingness to work hands-on with tools and equipment., • Strong communication and organizational skills., • Strong computer skills and experience using Microsoft Suite. Preferred Qualifications • Experience in coating, laminating, converting, printing, or other continuous-process manufacturing., • Experience with AC/DC drives and motor controls., • Experience in installing electrical power and control circuits., • Ability to reference and interpret National Electric Code, determine required fuse, breaker, conduit and wire size per code., • Knowledge of predictive maintenance and reliability practices., • Experience with CMMS maintenance systems., • Experience with Combustion Systems., • Technical training or certification in electrical, mechanical, or industrial maintenance. What We Are Looking For The ideal candidate is a working maintenance leader who enjoys being on the manufacturing floor and solving problems. You should be comfortable troubleshooting a machine, helping a technician make a repair, deciding what needs to be done next, and then looking for ways to prevent the problem from happening again. This position is ideal for an experienced Maintenance Lead, Lead Technician, or Maintenance Supervisor who wants to combine hands-on technical work with leadership and responsibility for improving the overall maintenance operation. Physical & Work Environment • Work in a manufacturing environment around operating machinery., • Ability to stand, walk, climb, bend, kneel, and work in various equipment locations., • Ability to safely use hand and power tools., • Ability to work from ladders and elevated platforms when required., • Ability to lift and handle maintenance-related components and materials., • Ability to work required shifts, overtime, weekends, or emergency call-ins as needed. We are looking for someone who can lead from the floor—someone who can troubleshoot the problem, help fix it, lead the team, and improve the process.

Job Description Role and Responsibilities Performs final assembly, finishing and/or testing of customer product in the Assembly & Test Department at Daniel Road location as assigned. As an Assembly & Test Technician, you will be responsible for building assemblies and other various components that conform to specifications and drawings to meet the Company’s quality standards. Key duties/responsibilities of Assembly & Test Technician, including, but not limited to: Working with Helicoil’s installing and removing as necessary. Assemble and fit together mechanical components building chambers and other final assemblies for testing. Troubleshoot and help resolve assembly issues that occur. Perform final cleaning operations on finished product by customer standards and procedures. Inspects work in progress to verify compliance with customer and company standards reporting any damage that may be present. Verify all assembly, finishing and test requirements have been completed prior to product sign-off. Work together with engineering, production and quality management to ensure products meet customer quality expectations. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Qualifications and Education Requirements Minimum Education: • High School Graduate or equivalent GED Minimum Qualifications: Previous hands-on mechanical experience with car trucks or other small engines and/or body work. 3 to 5 years’ experience in a mechanical assembly role a plus. Ability to interpret customer engineering specifications and/or drawings to determine product and quality requirements. Ability to read, write and speak fluent English. Language Skills Ability to understand and speak English. Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from supervisors, managers, clients, customers, and the general public. Mathematical Skills Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and basic trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability Ability to define problems, collect data, establish facts, and draw valid conclusions. An ability to interpret an extensive variety of instructions furnished in written, oral, diagram or schedule form, and deal with several abstract and concrete variables. Physical demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to reach with hands and arms; and talk or hear. The employee is regularly required to stand; walk; sit; and use hands or fingers, handle or feel. The employee is frequently required to stand and work, lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception, color vision and the ability to adjust focus. Work environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate and sometimes loud. MUST HAVE Basic mechanical skills Ability to use hand tools. Basic understanding reading a blueprint. Motivated, dependable and accountable

We are seeking an experienced Quality Technician 3 to support product development, prototype evaluation, and quality testing in an engineering lab or machine shop environment.The ideal candidate will have strong hands-on mechanical and electrical skills, experience with workshop tools and test equip

Job Description A-Line Staffing is now hiring Lab Technician 1 (2nd Shift) in Franklin Lakes, NJ. The Lab Technician 1 (2nd Shift) would be working for a Fortune 500 company and has career growth potential. Full time / 40+ hrs/wk. Temp to Hire Lab Technician 1 (2nd Shift) Compensation: pay $26-$28/hr; benefits after 90 days; 401(k) match after 1 year (eligibility dates) Lab Technician 1 (2nd Shift) Highlights: contract role; on-site; required availability: 2:00 PM – 10:30 PM (Second Shift) Lab Technician 1 (2nd Shift) Responsibilities • Support daily test lab activities and bench-level engineering tests (DV, stability, feasibility, method development), • Execute minimally complex test requests with moderate assistance, • Support equipment qualification (IQ/OQ) and test method validation activities, • Support test method development and verification/validation teams, • Troubleshoot test request issues with requestors and document findings, • Follow good documentation practices and good laboratory practices; support compliance Lab Technician 1 (2nd Shift) Requirements: High School Diploma/GED; attendance mandatory first 90 days • Education/experience (one of the following), • BS degree (0+ years in regulated industry/lab setting), or, • AAS degree (0+ years in regulated industry/lab setting), or, • High School Diploma + 4+ years in regulated industry/lab setting, • Able to stand while performing tasks and lift up to 50 lbs, • Comfortable working in a lab environment using PPE, • Proficient written/verbal communication skills Lab Technician 1 (2nd Shift) Preferred Qualifications • Prior regulated lab experience and familiarity with GLP/GDP documentation If you think this Lab Technician 1 (2nd Shift) position is a good fit, reach out—call, email, or apply.

Job Description The Electro Mechanical Technician will play a crucial role within the maintenance team, primarily working on manufacturing machinery including corrugators and die cutters. This position focuses on equipment maintenance, troubleshooting, system repair, and preventive maintenance to ensure optimal operational efficiency with no travel required. Advancement opportunities exist, leading to engineering roles. Responsibilities • Perform maintenance on manufacturing machinery such as corrugators and die cutters, • Troubleshoot and diagnose mechanical and electrical system issues, • Execute timely system repairs to minimize downtime, • Conduct preventive maintenance to enhance equipment reliability, • Knowledge of printing press equipent is a plus Preferred Qualifications • 5+ years of experience in an industrial or manufacturing environment, • Expertise in mechanical repair and troubleshooting, • Knowledge of preventive maintenance techniques, • Familiarity with safety procedures related to maintenance work, • Strong communication skills\nCompany Description Many of those employed through JobConnection Services find that their positions are temp-to-hire. Our skilled office staff works to set each employee up for success! We ensure you have a clear picture of the responsibilities of the assignment you are going to, and work as a liaison between you and the client. A personal relationship that includes constant communication with our clients makes for a pain‐free temporary or permanent placement process - and that translates to happy employees! Stop in today - and feel free to bring a friend along! Many of those employed through JobConnection Services find that their positions are temp-to-hire. Our skilled office staff works to set each employee up for success! We ensure you have a clear picture of the responsibilities of the assignment you are going to, and work as a liaison between you and the client. \r\n\r\nA personal relationship that includes constant communication with our clients makes for a pain‐free temporary or permanent placement process - and that translates to happy employees!\r\n\r\nStop in today - and feel free to bring a friend along!

Job Description Position Summary The Enterprise Systems Test Technician prepares, configures, tests, and troubleshoots enterprise server and storage systems in a manufacturing environment. This role works closely with the integration team to ensure systems meet quality, functionality, and performance standards prior to shipment. The ideal candidate has a strong technical aptitude, enjoys diagnosing hardware and system issues, and is comfortable working with complex computing equipment in a fast-paced production environment. Essential Duties & ResponsibilitiesSystem Testing & Validation • Prepare and connect server and storage systems to designated test environments., • Execute functional, performance, diagnostic, and burn-in testing using approved software and test procedures., • Monitor test progress, review system logs, and verify systems meet established pass/fail criteria., • Ensure all required testing is completed and documented prior to release.Troubleshooting & Problem Resolution, • Investigate and diagnose hardware, software, networking, and configuration-related issues identified during testing., • Isolate failed components and perform authorized replacements or corrective actions., • Retest systems following repairs to verify successful resolution., • Escalate complex technical issues to Engineering, Quality, or Product Support teams as needed.Documentation & Quality Assurance, • Record test results, repairs, and system information within manufacturing and inventory systems., • Maintain accurate documentation of failures, corrective actions, and retest outcomes., • Verify systems meet customer, engineering, and quality requirements., • Follow established manufacturing, quality, ESD, and safety procedures.Production Support, • Support the movement, staging, and preparation of systems throughout the testing process., • Maintain an organized work area and contribute to efficient production flow., • Participate in continuous improvement initiatives to improve testing efficiency and quality.Requirements, • High School Diploma or equivalent., • 2+ years of experience in hardware testing, electronics manufacturing, system integration, server support, networking, or a related technical field., • Experience troubleshooting computer hardware and system-level issues., • Basic understanding of networking concepts, including Ethernet connectivity and IP addressing., • Ability to read and follow technical documentation, test procedures, and work instructions., • Strong attention to detail and problem-solving skills.Nice to Have, • Associate degree in Information Technology, Electronics, Computer Engineering Technology, or a related field., • Experience testing enterprise servers, storage systems, networking equipment, or data center hardware., • Familiarity with Linux operating systems., • Experience working with manufacturing test software, diagnostic tools, or production environments., • Knowledge of SSDs, NVMe storage, PCIe devices, networking hardware, and related technologies., • Experience working in an OEM, contract manufacturing, or high-volume production environment. COMPENSATION: The base salary range for this position is $64,000 to $73,000; the exact salary depends on several factors such as experience, skills, education, and budget. BENEFITS OVERVIEW: We offer a competitive benefits package that includes medical, dental, vision, basic life and AD&D coverage, short- and long-term disability, a 401(k) retirement plan, annual discretionary salary increases and bonuses. Employees receive paid company holidays, paid time off, and access to company-paid training. Optional benefits include tuition reimbursement, a 529 college savings plan, pet insurance, legal and ID theft coverage, and other voluntary insurance plans.

Full-time Description Location: Palm Beach, FL Area Position Type: Full-Time Salary Range: $45,000-$55,000 Annually At Powernet, we don’t just deliver top-tier wireless, voice, Managed IT, and security solutions—we make connecting businesses seamless, smart, and reliable. We’re a team of innovators, problem solvers, and tech enthusiasts who believe work should be rewarding, collaborative, and full of high-fives (virtual or in-person!). If you are eager to launch your IT career, love diving into hands-on technical troubleshooting, and get excited about helping people solve tech puzzles, you’ve found your crowd. • 5 weeks PTO, • Remote work flexibility, • Anniversary gift plan, • Employee referral program, • Health, vision, dental, and life insurance available, • HSA Account, • 401(k) matching As our Entry-Level Help Desk Technician, you are the first line of defense for our technical support operations! You’ll serve as an essential problem solver, taking incoming help desk calls, resolving support tickets, and ensuring our clients have a seamless technology experience. From imaging PCs and setting up user workstations to monitoring system alerts, managing Active Directory permissions, and assisting with installations, you’ll play a key role in keeping our systems and clients running smoothly every day. 1. End-User Support & Day-to-Day Troubleshooting • Answer incoming help desk phones, log detailed ticket notes, and respond to end-user support requests promptly and professionally., • Perform first-level troubleshooting for Microsoft Windows in domain environments, Office 365, Google Workspace, and anti-virus applications., • Manage file/folder permissions, user accounts, and basic configurations within Active Directory and Group Policy. 1. Workstation Setup & Deployment Assistance • Image PCs and configure desktop workstations, laptops, printers, scanners, and copiers for end users., • Assist senior technical teams with technology upgrades, network deployments, and hardware/software implementations., • Provide both remote and periodic on-site assistance to resolve local hardware, cabling, and wiring needs. 1. Alert Monitoring & Systems Hygiene • Actively monitor incoming system alerts, conduct initial research, resolve routine issues, and escalate complex incidents to upper-tier engineering teams when required., • Maintain squeaky-clean records, documenting technical solutions, updating service requests, and keeping configuration logs current., • Participate in a rotational on-call schedule to support critical client needs and maintain strict service level agreements (SLAs). This is a remote-friendly position that may require occasional local travel for on-site hardware deployments, workstation setups, or equipment replacements. You should be comfortable managing multiple activities simultaneously in a fast-paced environment, communicating clearly over the phone and via chat, and maintaining a positive, customer-first attitude. Requirements What You Bring to the Table • Education: High School Diploma or GED required (Associate Degree in Information Technology or a related field preferred)., • Technical Fundamentals: Hands-on familiarity or entry-level experience supporting Microsoft Windows, Active Directory, Group Policy, Office 365, and Google Suite., • Hardware & Infrastructure Awareness: Basic knowledge of PC imaging, workstation setup, cabling/wiring, and anti-virus software (experience with network equipment troubleshooting is a big plus!)., • Problem-Solving Mindset: Strong diagnostic skills with the ability to research, troubleshoot, and document technical issues quickly., • Communication & Service: Outstanding customer service, clear communication, and a passion for helping non-technical users solve problems., • Driver Requirements: Must possess a valid driver’s license for periodic local deployment support. Salary Description $45,000-$55,000 annually

Help Desk Technician L1 – MSP \n\n • Location: Fair Lawn, NJ\n, • Compensation: $40,000–$55,000 base + bonus\n, • Schedule: Hybrid – 4 days onsite / 1 day remote\n, • Employment: Full-Time, Direct Hire\n\n \n Overview \n A fast-growing Managed Service Provider in Northern New Jersey is seeking a Help Desk Technician L1 to join its expanding Service Desk team. The company supports mid-sized businesses throughout New York City and Northern New Jersey and has experienced significant year-over-year growth. \n This is an excellent opportunity for an early-career IT professional who already has a solid technical foundation and wants a structured path into Level 2 engineering. The company provides formal onboarding, senior-engineer mentorship, certification support, and increasing technical responsibility as you progress. \n \n Responsibilities \n\n • Serve as the first point of contact for client support requests via phone and email.\n, • Troubleshoot and resolve workstation, login, password, MFA, and common application issues.\n, • Manage basic user administration within Active Directory and Entra ID.\n, • Support Microsoft 365, including permissions, licensing, and distribution lists.\n, • Perform workstation deployments, configurations, and troubleshooting.\n, • Troubleshoot Microsoft Office, Adobe, and other common business applications.\n, • Configure and troubleshoot network printers, including scan-to-email and scan-to-folder.\n, • Troubleshoot basic Wi-Fi, DNS, DHCP, and network connectivity issues.\n, • Utilize PSA and RMM platforms to manage tickets, monitor alerts, and support client devices.\n, • Use Microsoft Intune to review devices, run scripts, and check compliance.\n, • Maintain accurate ticket notes and technical documentation.\n, • Properly escalate advanced networking, server, security, and infrastructure issues to L2/L3 engineers.\n, • Work toward independently managing approximately 8–12+ tickets per day after completing the initial training period.\n\n \n Qualifications \n\n • 1–2+ years of IT support experience preferred.\n, • MSP or fast-paced corporate Help Desk experience strongly preferred.\n, • Hands-on experience with Microsoft 365 and Active Directory.\n, • Familiarity with Entra ID and Group Policy.\n, • Basic Windows Server support experience.\n, • Experience with workstation deployments and rollouts.\n, • Foundational networking knowledge, including DNS, DHCP, SMB, and basic connectivity troubleshooting.\n, • Exposure to PSA, RMM, and/or Intune platforms is a plus.\n, • Strong troubleshooting and problem-solving ability.\n, • Strong organizational, documentation, and time-management skills.\n, • Ability to take ownership of issues and work effectively within a team.\n, • High school diploma or higher.\n, • Certifications are not required.\n\n \n 90-Day Ramp-Up \n Weeks 1–4: Structured technical training, shadowing senior engineers, and learning client environments and internal processes. \n Week 6+: Begin independently owning the support queue, handling approximately 8–12+ tickets per day while continuing to receive mentorship and escalation support from L2/L3 engineers. \n \n Benefits & Perks \n\n • 100% company-paid health insurance\n, • Dental and vision coverage\n, • Generous PTO\n, • 401(k) with Safe Harbor match\n, • $50/month cell phone reimbursement\n, • Certification reimbursement\n, • Internal technical training program\n, • Structured onboarding and mentorship\n, • Clear career path from L1 → L2 Engineer\n\n

AWS Infrastructure Services owns the design planning delivery and operation of all AWS global other words were the people who keep the cloud running.We support all AWS data centers and all of the servers storage networking power and cooling equipment that ensure our customers have continual access

Job Description Overview Opportunity: Maintenance Technician Perform preventative and repair maintenance work to ensure the hotel is maintained according to established quality and sustainability standards while treating guests in a warm and friendly manner. Your Growth Path Engineer - Engineering Supervisor - Chief Engineer Your Focus • Assist with preventative maintenance and complete work orders related to replacing and repairing ceiling tiles, sheet-rock and wallpaper., • Install or repair sheetrock and other wall coverings., • Paint designated areas and items., • Replace basic electrical fixtures, light switches, receptacles, light bulbs and fixtures., • Perform minor plumbing functions., • Focus on guest satisfaction scores and work toward increasing departmental and overall guest satisfaction., • Follow Service Recovery Guidelines., • Maintain the curb appeal including but not limited to snow removal, lawn care, gardening and trash removal., • Follow sustainability guidelines and practices related to HHM’s EarthView program., • Practice safe work habits, wear protective safety equipment and comply with MSDS and OSHA standards., • Perform other duties as requested by management. Your Background and Skills • High School diploma and Trade school course work in related field preferred., • Previous maintenance experience or equivalent training required. HHM Hotels Benefits and Perks • Competitive wages for full time and part time opportunities, • Medical, Dental and Vision Health Insurance, • Paid Time Off, • 401k Company Match, • Daily Pay, • Free Basic Life Insurance, • 24/7 access to TELUS Health, a confidential work-life resource., • Travel Discounts, • Commuter Transit and Commuter Parking Benefits, • Employee Assistance and Wellness Program, • Educational/Professional Development, • Referral Bonus Program Work Context • Work schedule varies and may include working on holidays and weekends and alternate shifts., • Requires standing for extended periods, walking, pushing, lifting up to 50 pounds, bending and reaching, kneeling, stooping, crawling and climbing. What We Believe People Are Our Capability – Hearts That Serve – Only Excellence – Stay Nimble - Own It

Job Description \n \n \nYou don't see it, but it's there. Our employees work on the world's most advanced electronics from saving emissions in the City of Lights to powering the Mars Rover to protecting the F- 35 fighter jet. At Electronic Systems, you'll be among the brightest minds, working on the aerospace and defense industry's most difficult problems. Drawing strength from our differences, we're innovating for the future. And you can, too. Our flexible work environment provides you with a chance to change the world without giving up your personal life. We put our customers first - exemplified by our missions: "We Protect Those Who Protect Us®" and "We Innovate For Those Who Move The WorldTM." Sound like a team you want to be a part of? Come build your career with BAE Systems.\n \n\n • Conducting system, subsystem, and component-level EMI tests \n • Testing complex circuits and systems for EMI compliance (e.g., MIL-STD-461) \n • Following EMI test procedures under the guidance of EMI engineers to meet specified product performance for all Electromagnetic Environmental Effects (E3) compliance, including conducted and radiated emissions and immunity \n • Troubleshooting system-level issues and isolating EMI sources \n • Reviewing EMI test procedures and generating EMI test reports \nEmployee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We take pride in important work-life balance initiatives including every other Friday Off, Flextime, and Telecommuting. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics.\n \n \nBecause of the need for consistent, in-person collaboration and/or the requirement to perform all work onsite due to the nature of this particular role, it will be performed fulltime on site. This means work will be conducted on location at a BAE Systems facility 100% of the time.\n \n Required Education, Experience, & Skills \n \n\n • Associates Degree in a STEM Field (Science, Technology, Engineering, Mathematics)\n, • 4+ years' experience in electrical, RF, or antenna testing\n, • 4+ years' experience in EMI/EMC setup, testing, data collection, and reporting\n, • Working knowledge of MIL-STD-461 or equivalent standard (e.g. 47CFR15, RTCA/DO-160, D6-16050)\n, • Proficient in EMI/EMC testing\n, • Experience operating electrical test equipment such as antennas, oscilloscopes, spectrum/network analyzers, EMI receivers, LNAs, signal generators, multimeters, etc.\n, • Organized, flexible, and able to multitask in a dynamic team environment\n, • Proficiency in Microsoft Office (Word, Excel, Outlook, and Visio)\n, • Ability to obtain and maintain a DoD security clearance (US citizenship required)\n\n Preferred Education, Experience, & Skills \n \n\n • Associate's degree in Electronics Technology or related Science with a minimum of 4 years of related experience, or equivalent military training and EMI-related experience\n, • Knowledge of RF principles and RF engineering with emphasis in EMI\n, • Familiarity with EMI software tools such as TILE, EMC32, or Elektra\n, • Experience reviewing EMI test processes for completeness and accuracy\n, • Proficiency in product qualification tests and techniques\n, • Active Secret or Top Secret DoD security clearance (US citizenship required)\n, • Employee must be on-site (no remote work).\n\n Pay Information\n \nFull-Time Salary Range: $82907 - $132651\n \n \nPlease note: This range is based on our market pay structures. However, individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. \n \n \nEmployee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics.\n \n About BAE Systems, Inc.\n \nBAE Systems, Inc. is a defense, aerospace, and security company headquartered in Falls Church, Virginia, with more than 40,000 employees worldwide. We serve, supply, and protect those who protect us. As one of the most geographically diverse international defense companies, we deliver a full range of products and services spanning air, land, maritime, space, and cyber, including advanced electronics, intelligence solutions, and dedicated customer support.\n \n \nOur culture is performance-driven and values-led, built on curiosity, creativity, and collaboration. Purpose isn't a tagline here. It's what drives us. We're developing breakthrough technologies that defend national security and make a lasting impact on our communities and our planet. When you join BAE Systems, you're not just building a career. You're contributing to a mission that truly matters.\n \n \nThis position will be posted for at least 5 calendar days. The posting will remain active until the position is filled, or a qualified pool of candidates is identified.

Job Description CoreWeave is The Essential Cloud for AI™. Built for pioneers by pioneers, CoreWeave delivers a platform of technology, tools, and teams that enables innovators to build and scale AI with confidence. Trusted by leading AI labs, startups, and global enterprises, CoreWeave combines superior infrastructure performance with deep technical expertise to accelerate breakthroughs and turn compute into capability. Founded in 2017, CoreWeave became a publicly traded company (Nasdaq: CRWV) in March 2025. Learn more at www.coreweave.com. About the Role: CoreWeave is seeking a GSOC Operator to join our 24/7/365 team in Livingston, NJ. This role supports the protection of CoreWeave personnel and infrastructure, corporate offices, data centers, other monitored locations, and the physical security systems that support those environments. GSOC Operators continuously monitor physical security and situational-awareness systems; assess, document, and coordinate response to physical security, life safety, cyber-physical, and monitoring-degradation events; execute approved access and credential workflows; and serve as a central communications hub for internal teams, onsite security, service providers, emergency responders, and other authorized stakeholders. This role includes monitoring our wireless intrusion detection system capabilities Operational Notice: This is a 24/7 on-site team. You will be required to commit to rotating shifts, including nights, weekends, and holidays, to ensure continuous operational coverage. What You'll Do:Security Monitoring & System Health • Conduct proactive, continuous monitoring and operational checks of Genetec Security Center, CCTV, access control, intrusion detection, alarm, environmental and life-safety notification, and related physical security systems., • Assess and validate alarms using available video, access-control, site, and contextual information; perform approved first-line troubleshooting; and escalate system faults or monitoring degradation to the responsible engineering, network, facilities, provider, or site team., • Document, route, track, and escalate physical-security system issues and related work items through resolution, including coordinating technician access and confirming restoration of monitoring capability.Access & Credential Operations, • Process approved physical-access and credential requests, perform required identity-verification steps, and produce, quality-check, package, ship, track, secure, suspend, or deactivate credentials in accordance with established procedures and authorization requirements., • Conduct authorized after-hours virtual escorts and maintain continuous monitoring, communication, and documentation for the duration of each escort.Incident Management & Emergency Response, • Serve as the initial intake and coordination point for physical-security, life-safety, cyber-physical, and monitoring-degradation events; assess available information and initiate required response actions without unnecessary delay., • Create and maintain incident records in Ontic, assign initial GSOC severity, and initiate approved PagerDuty and private /inci escalation workflows when required., • Coordinate the physical-security component of active incidents, including onsite response, CCTV review, access-control correlation, evidence preservation, factual status updates, and documented transfer of incident ownership when another function assumes the lead., • Initiate and support post-incident reviews for qualifying events by preserving evidence, reconstructing timelines, documenting lessons learned, and tracking follow-up actions., • Maintain accurate shift-log entries and complete structured written and verbal handovers of open incidents, access requests, monitoring degradation, and other unresolved operational items.Communication, Intelligence & Documentation, • Serve as a central communications hub, providing clear, timely, and factual updates through approved channels to CoreWeave teams, onsite security, service providers, emergency responders, and other authorized stakeholders., • Operate Wave PTX Dispatch to monitor, acknowledge, and coordinate radio communications using assigned call signs, plain language, and closed-loop communication., • Monitor threat, weather, provider, and other situational-awareness sources; assess potential impact to CoreWeave people and locations; and prepare approved advisories, BOLOs, SITREPs, or other internal products., • Execute authorized Everbridge notifications and monitor delivery, acknowledgements, assistance requests, and emergency-accountability activity., • Maintain accurate, contemporaneous records in Ontic and the designated shift log; use Jira and other approved systems for access and service-request workflows., • Produce clear, timely incident summaries, timelines, evidence references, and approved reports for authorized stakeholders. Note: Duties and responsibilities outlined are subject to change and refinement based on evolving operational demands. Who You Are: • Experience: 2+ years of experience in GSOC/PSOC environments, dispatch center, emergency operations center, data center security operations, critical-infrastructure monitoring environment, or related role., • Technical Skills: Working knowledge of CCTV, access control, intrusion detection, alarm monitoring, incident management, and emergency communications systems; experience with Genetec Security Center or a comparable platform., • Tools: Experience with incident management and collaboration platforms such as Ontic, Jira, Slack, Google Workspace, or comparable systems., • Operational Capability: Demonstrated ability to assess risk, prioritize competing events, make timely decisions within defined authority, escalate appropriately, and coordinate response under pressure., • Vigilance: Ability to maintain sustained vigilance, manage multiple systems and communications channels, and accurately assess CCTV, access-control, alarm, and incident information., • Communication & Ethics: Proven ability to communicate clearly and professionally under pressure while protecting sensitive and confidential information.Preferred:, • Associate's or Bachelor's degree in Security Management, Information Technology, Criminal Justice, Emergency Management, or equivalent industry experience., • DHS Incident Command System (ICS) training (ICS-100, ICS-200)., • Genetec certification, ASIS PSP, CPP, or related security certifications and training., • Experience within data center environments, corporate security, emergency operations, public-safety dispatch, or other critical-infrastructure environments., • Familiarity with on-call alerting, mass notification, radio dispatch, credentialing, biometric access control, key management, or related security platforms; experience with PagerDuty, Everbridge, Wave PTX, HID Origo, ClearID, Alcatraz, BioConnect, or comparable systems is a plus., • Exposure to wireless intrusion detection systems (WIDS) and broader RF threats, including unauthorized-device investigations; Bastille Wireless Airspace Cybersecurity Platform experience is preferred. Wondering if you're a good fit? We believe in investing in our people, and value candidates who can bring their own diversified experiences to our teams – even if you aren't a 100% skill or experience match. Here are a few qualities we've found compatible with our team. If some of this describes you, we'd love to talk. • You love to solve complex security challenges and protect critical infrastructure., • You're curious about learning and mastering new security technologies and systems., • You maintain focus, sound judgment, and composure during high-stress or rapidly changing incidents.Why CoreWeave? At CoreWeave, we work hard, have fun, and move fast! We're in an exciting stage of hyper-growth that you will not want to miss out on. We're not afraid of a little chaos, and we're constantly learning. Our team cares deeply about how we build our product and how we work together, which is represented through our core values: • Be Curious at Your Core, • Act Like an Owner, • Empower Employees, • Deliver Best-in-Class Client Experiences, • Achieve More Together We support and encourage an entrepreneurial outlook and independent thinking. We foster an environment that encourages collaboration and enables the development of innovative solutions to complex problems. As we get set for takeoff, the organization's growth opportunities are constantly expanding. You will be surrounded by some of the best talent in the industry, who will want to learn from you, too. Come join us! The base salary range for this role is $65,000 to $95,000. The starting salary will be determined by job-related knowledge, skills, experience, and the market location. We strive for both market alignment and internal equity when determining compensation. In addition to base salary, our total rewards package includes a discretionary bonus, equity awards, and a comprehensive benefits program (all based on eligibility). What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs. The benefits below reflect our US-based offerings for full-time employees; for roles in other locations, benefits vary and are shared during the hiring process. These include: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment, • A work culture focused on innovative disruption California Applicants California Consumer Privacy Act Equal Opportunity & Accommodations CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: careers@coreweave.com. Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job Description Job Details: Job title: Product Development Technician Duration: 6+ months of contract Location: 1 Becton Drive, Franklin Lakes New Jersey 07417 JOB DESCRIPTION BS in Mechanical/ Bio-Mechanical Engineering .Independently plans and performs experiments that support new product or technology feasibility testing. Critically analyzes data generated from experiments. Reports results of experiments to R&D management and peers. Advises of the product development implications arising from the results and when necessary prepares technical reports. Maintains scientific equipment as necessary to support scientific and technical objectives as well as regulatory and governance requirements. Maintains good laboratory practices (GLP) consistent with SM product development objectives and regulatory guidelines. Interfaces with engineering to support experimental designs and performs testing of product produced experimentally as required Bottom of Form \nCompany Description LanceSoft is rated as one of the largest staffing firms in the US by SIA. Our mission is to establish global cross-culture human connections that further the careers of our employees and strengthen the businesses of our clients. We are driven to use the power of our global network to connect businesses with the right people, and people with the right businesses without bias. We provide Global Workforce Solutions with a human touch. LanceSoft is rated as one of the largest staffing firms in the US by SIA. Our mission is to establish global cross-culture human connections that further the careers of our employees and strengthen the businesses of our clients. We are driven to use the power of our global network to connect businesses with the right people, and people with the right businesses without bias. We provide Global Workforce Solutions with a human touch.

Job Description About the Company LTS is a global leader in transdermal and oral thin‑film drug delivery technologies. Our teams have pioneered breakthroughs such as the first contraceptive patch, nicotine patch, oral active ingredient film, and Parkinson’s patch. When you join LTS, you become part of a team that continues to shape the future of patient care and bring life‑changing therapies to market. At LTS, our purpose drives everything we do: We CARE. We CREATE. We DELIVER. We’re committed to fostering an employee experience that reflects our innovation — supportive, collaborative, and empowering. Across our New Jersey and Minnesota locations, you’ll work alongside knowledgeable experts on diverse projects in an environment where every day is different and your contributions truly matter. Position Overview LTS is seeking a motivated Calibration Technician at Level I, II, or III to join our Manufacturing Maintenance team in our West Caldwell, NJ site. We are hiring based on experience, education, and demonstrated proficiency, offering clear opportunities for professional growth as you develop your skills. • Location: West Caldwell, NJ, • Schedule: 7:30 AM – 4:00 PM, 1st Shift In this role, you will perform calibrations and support critical electronic instrumentation across our facility, directly contributing to the delivery of life-changing pharmaceutical products. What You'll Do/Key Responsibilities • cGMP Compliance: Abide by all cGMP, FDA, and DEA regulatory standards in all calibration and maintenance activities., • Calibration & Repair: Calibrate, document, troubleshoot, and repair/replace instrumentation for systems measuring level, temperature, pressure, flow, humidity, speed, time, and other process variables., • CMMS Management: Utilize Computerized Maintenance Management Systems (CMMS) with high proficiency for work logging and tracking., • Departmental Support: Provide technical support for electronic equipment across all facility departments., • Equipment Maintenance: Troubleshoot, repair, modify, and maintain pharmaceutical production equipment., • Planning & Ordering: Plan and estimate maintenance/calibration work and order necessary replacement parts., • Scheduling & On-Call: Maintain flexibility to work off-shift, weekends, and holidays based on production schedule demands, and participate in an on-call rotation schedule.Qualifications & Requirements, • Education: Associate’s degree required., • Experience Levels: Level I (0–1 yrs), Level II (2–3 yrs), Level III (4-5 yrs) in engineering or related technical experience., • Communication Skills: Above-average reading, writing, and verbal communication skills., • Technical & Math Skills: Above-average mathematical skills and hands-on proficiency with basic tools and calibration equipment., • Software Proficiency: Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint). CMMS experience preferred., • Learning & Practice: Ability and desire to learn disciplines and methods related to good calibration practices (GCP)., • Physical & Work Environment: Ability to stand for the majority of the day, lift/move 50+ pounds, and ability to gown for manufacturing cleanroom areas.Compensation & Experience Levels The role may be filled at Level I, II, or III based on each candidate’s education, relevant experience, technical proficiency, and ability to work independently. The hourly pay ranges and typical qualifications for each level are outlined below. Level I — Developing Technician Hourly pay: $33.00–$34.50 Typical experience: 0–1 years of engineering or related technical experience. Level I candidates bring a foundational understanding of calibration roles and controls, work closely with Senior Instrument Technicians, and focus on developing core calibration and control-system skills. Level II — Proficient Technician Hourly pay: $35.00–$36.50 Typical experience: At least 2–3 years of engineering or related technical experience. Level II candidates are fully proficient in a specific calibration discipline, work under moderate supervision, execute tasks independently, and troubleshoot systems within their area of expertise. Level III — Advanced Technician Hourly pay: $37.00–$38.50 Typical experience: At least 4–5 years of engineering or related technical experience. Level III candidates demonstrate broad proficiency across calibration disciplines, apply calibration principles in multiple functional areas, and work with minimal supervision. Relevant certification, such as ISA CSST, may also be considered as part of a candidate’s qualifications. Ready to Apply? Join LTS and become part of a team that shapes the future of patient care! If your experience aligns with Level I, II, or III, we encourage you to submit your application today. Equal Employment Opportunity LTS is an equal opportunity employer. We consider all qualified applicants for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information, or any other characteristic protected by applicable law.

Job DescriptionQuality Assurance - Stability Associate Quality Assurance Associate – Stability Location: Totowa, NJ (Onsite) Employment Type: Full-Time | Non-Exempt (Hourly) Department: Quality Assurance Reports To: QA-OTC Drug Stability Coordinator Organizational Relationships: Works closely with the QA-OTC Drug Stability Coordinator and the Drug Stability Technician. Works with QA Systems & Compliance, QA Documentation, Validation, QC, Manufacturing, R&D, Process Engineering, Warehouse, Regulatory Affairs, Purchasing, external contract testing laboratories, and customer quality contacts as needed to support the stability program. Position Summary The QA Associate – Stability gives day-to-day quality assurance support to the QA-OTC Drug Stability Coordinator in running the site's OTC drug stability program, working alongside the Drug Stability Technician. You will maintain the stability schedule and pull calendar, coordinate sample storage, pulls and shipments to internal and external labs, support stability chamber monitoring and excursion documentation, and review and trend stability data. You will also help with stability protocols and reports, support investigations into stability-related deviations and OOS/OOT results, and keep stability records complete and accurate. All work follows cGMP (21 CFR 210/211, including 211.166 and 211.137), ISO 22716, ICH stability principles and customer requirements, with a strong commitment to data integrity. Responsibilities Stability Program Coordination • Help maintain the master stability schedule, tracking study start dates, storage conditions and upcoming pull points (e.g., initial, 1, 2, 3, 6, 9, 12, 18, 24 and 36 months)., • Prepare and issue pull notices and work orders to QC and contract labs ahead of each pull date, and confirm pulls are completed within the allowable window., • Support new study setup, including labeling, sample quantity checks, storage location assignment and creating study records under approved protocols., • Maintain a tracker of active studies, pending pulls, testing status and reports due, and escalate at-risk or missed pull points., • Coordinate with the Drug Stability Technician, Manufacturing, R&D and Regulatory Affairs on batch selection, packaging configurations and study requirements for commercial, new product and change-related studies. Sample Management & Chamber Support • Perform and document stability sample pulls, chain of custody and shipments to internal and external labs., • Maintain accurate sample inventory, including reconciliation and disposal of expired or completed study samples., • Support daily chamber oversight: review temperature and humidity monitoring records, document alarms and excursions, and coordinate with Facilities and Engineering on chamber issues., • Help document and assess the impact of chamber excursions and out-of-condition storage events, and track related corrective actions to closure., • Track chamber qualification, mapping and calibration due dates and maintain the related records. Stability Data Review & Reporting • Review stability results from QC and contract labs for completeness, accuracy and conformance to protocol specifications and time points., • Enter, verify and trend stability data (e.g., assay, pH, viscosity, appearance, micro and preservative efficacy) in Excel or approved systems to spot shifts, trends and potential OOT results., • Help prepare stability summary reports, shelf-life and expiration dating support, and customer stability data packages., • Support drafting and revision of stability protocols, amendments and study summaries., • Prepare stability metrics and status updates (e.g., on-time pull rate, testing turnaround, open investigations) for QA leadership. Investigations & Compliance Support • Flag potential OOS, OOT or unexpected results to the Stability Coordinator and QA, and support initial data gathering., • Help document stability-related deviations, NCRs and QIRs by gathering records, sample history and batch information for QA- and QC-led investigations., • Track stability-related deviations and CAPAs and follow up with owners to help ensure timely closure and effectiveness checks., • Support change control for changes to formulation, packaging, suppliers or storage conditions by helping assess and document their impact on studies., • Keep stability records audit-ready and help with document and sample requests during customer audits and regulatory inspections. Data Integrity & Documentation • Apply GDP and ALCOA+ principles to all stability records, including logbooks, pull records and electronic data., • Support periodic review of stability-related electronic records and audit trails (e.g., ERP, instrument software, monitoring systems), and escalate anomalies., • File, scan and archive stability documentation according to record retention requirements., • Help write and revise stability SOPs, work instructions and forms. General • Suggest ways to improve stability program efficiency, tracking tools and documentation., • Perform other assignments as directed by the QA-OTC Drug Stability Coordinator, QA Systems & Compliance Lead or Director of Quality Assurance. Qualifications • Associate's degree in a scientific discipline (e.g., chemistry, biology, pharmaceutical science or a related field), or an equivalent mix of education and experience., • 0–2 years of experience in QA, QC, stability or lab operations in a GMP-regulated environment. Internship or co-op experience counts. OTC drug or pharmaceutical experience is preferred, and cosmetic experience is a plus., • Basic knowledge of cGMP (21 CFR 210/211) and ISO 22716. Familiarity with ICH stability guidelines (e.g., Q1A(R2)) and stability study design is a plus., • Familiarity with good documentation practices and data integrity principles (ALCOA+)., • Exposure to stability chambers, environmental monitoring systems or sample chain of custody is preferred., • Strong attention to detail and organization, with the ability to manage recurring deadlines across multiple studies., • Good analytical skills, including the ability to trend numerical data and recognize out-of-range results., • Good written and verbal communication skills, and the ability to work with QC, Manufacturing, R&D and external labs., • Proficiency in Word, Excel and PowerPoint. ERP or LIMS experience is a plus., • Ability to lift and handle stability samples and work in controlled storage areas as needed. Work Schedule • Onsite position based in Totowa, New Jersey., • Monday through Friday, full-time., • Overtime may be required to support audits, inspections, regulatory submissions and business needs. Overtime is paid in accordance with applicable federal and New Jersey law. Compensation $17.00 – $21.00 per hour Actual pay will be based on experience, qualifications, skills and internal equity. Benefits • Medical, Dental & Vision Insurance, • Company-paid Life, AD&D and Disability Insurance, • 401(k) with Company Match, • Paid Time Off (PTO), • Paid Company Holidays, • Special Paid Leave for Personal Events, • Employee Referral Program, • Year-End Gift, • Additional benefits as outlined in the Employee Handbook Equal Opportunity Employer Englewood Lab, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, pregnancy, veteran status, or any other characteristic protected by applicable federal, state, or local law. Englewood Lab provides reasonable accommodations to qualified individuals with disabilities in accordance with applicable law. Powered by JazzHR XX8w6FPbGj

Job DescriptionNow Hiring: Full-Time Electro-Mechanical Technician Join our growing team as an Industrial Electro-Mechanical Technician and play a vital role in keeping our production facility operating safely and efficiently. We are seeking a skilled, hands-on maintenance professional with strong mechanical and electrical troubleshooting abilities who enjoys working in a fast-paced industrial environment. This is a full-time position with a regular schedule of 40+ hours per week, including opportunities for overtime. The position follows a 4-day workweek (four 10-hour shifts), with potential for hours outside of regular schedule. What You'll Do As an Industrial Electro-Mechanical Technician, you'll be responsible for maintaining, troubleshooting, repairing, and optimizing the equipment that keeps our industrial laundry operation running at peak performance. You'll perform preventive maintenance, diagnose mechanical and electrical issues, and respond quickly to equipment breakdowns to minimize downtime. You'll work on a variety of industrial systems and equipment, including: • Industrial washers and dryers, • Ironers and finishing equipment, • Conveyor systems, • Boilers and steam systems, • Air compressors, • Electrical, mechanical, pneumatic, and hydraulic systems Your expertise will help maximize equipment reliability, improve operational efficiency, and support a safe, productive work environment. What You'll Do Key Responsibilities • Diagnose and Repair Equipment: Troubleshoot and repair electrical, mechanical, pneumatic, hydraulic, and steam systems. Identify root causes of equipment failures and perform corrective repairs with minimal supervision., • Electrical & Controls: Read and interpret electrical schematics, wiring diagrams, and ladder logic. Install, troubleshoot, and maintain electrical systems and control wiring up to 480V three-phase. Perform maintenance on motors, motor controls, VFDs, PLCs, sensors, and electrical circuits., • Preventive Maintenance: Perform scheduled preventive and predictive maintenance on industrial washers, dryers, ironers, conveyors, boilers, air compressors, pumps, motors, PLC-controlled equipment, and other production machinery to maximize equipment reliability., • Industrial Systems: Maintain and troubleshoot pneumatic, hydraulic, compressed air, steam, and boiler systems. Repair and replace various water and air pumps, valves, cylinders, bearings, belts, chains, and related mechanical components., • Equipment Documentation: Accurately document maintenance activities, work orders, parts usage, and equipment history within the Computerized Maintenance Management System (CMMS)., • Safety & Compliance: Follow all company safety policies and OSHA requirements, including Lockout/Tagout (LOTO), arc flash procedures, and safe work practices. Participate in safety inspections and continuous improvement initiatives., • Continuous Improvement: Identify recurring equipment issues and recommend improvements that increase reliability, reduce downtime, and improve production efficiency., • Project Support: Assist with equipment installations, facility expansions, renovations, machinery upgrades, capital improvement projects, and equipment commissioning., • Team Collaboration: Work closely with operations, engineering, and maintenance personnel to resolve equipment issues efficiently. Provide guidance and on-the-job training to less experienced technicians as needed., • Equipment Standards: Maintain all equipment in accordance with manufacturer specifications and company maintenance standards., • Material Handling & Mobility: Safely operate forklifts, scissor lifts, and other maintenance equipment. Work comfortably at heights, outdoors in varying weather conditions, and travel occasionally between facilities when required.Qualifications Qualifications, • Must be at least 18 years of age., • Associate degree, technical diploma, or trade certification in Electro-Mechanical Technology, Industrial Maintenance, Industrial Electronics, Mechatronics, or a related field preferred. Equivalent hands-on experience will be considered., • 3–5 years of industrial maintenance experience in a manufacturing, production, or industrial environment., • Strong working knowledge of electrical and mechanical systems, including AC/DC motors, motor controls, VFDs, control panels, and 480V three-phase electrical systems., • Experience troubleshooting and maintaining PLC-controlled equipment, with the ability to read and interpret ladder logic., • Proficient in reading and interpreting electrical schematics, wiring diagrams, P&IDs, and mechanical drawings., • Working knowledge of pneumatic, hydraulic, steam, compressed air, and boiler systems., • Experience using a Computerized Maintenance Management System (CMMS) is preferred., • Knowledge of Lockout/Tagout (LOTO) procedures and NFPA 70E electrical safety standards., • Ability to lift up to 50 pounds and work in industrial environments that may include heights, confined spaces, varying temperatures, and outdoor conditions., • Must possess strong troubleshooting, problem-solving, and communication skills with the ability to work independently and as part of a team.Benefits Compensation & Benefits, • Competitive hourly pay based on experience, technical skills, and qualifications., • Excellent work-life balance with a 4-day workweek and opportunities for overtime., • Paid time off (PTO) and paid holidays., • Comprehensive medical, dental, and vision insurance., • 401(k) retirement plan with a generous company match., • Company-paid life insurance and long-term disability coverage., • Company-provided uniforms., • Ongoing training and professional development opportunities., • Clear career advancement opportunities, including a defined pathway to Technician III and other leadership roles. Pay based of skills and knowledge. Ready to elevate your career? Apply now and become an integral part of our dynamic team dedicated to excellence in maintenance! Your future starts here. Dempsey Uniform is an EEO/Affirmative Action Employer and will make all employment-related decisions without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability or protected veteran status. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions in accordance with ADA requirements. COMPANY DESCRIPTION Since its founding in 1959, Dempsey Uniform & Linen Supply has become a leading uniform and linen supplier in the Mid-Atlantic by maintaining its family ownership and continuously investing in its people and plant to stay ahead of the competition. At Dempsey Uniform & Linen Supply, you'll find uniforms, linens and floor mats that can be rented at a low weekly cost that includes weekly pick-up, cleaning and delivery. Our offering includes uniform services, restaurant linen services, towel services, medical linen services and facility services. Technology Leadership Dempsey is an innovator in our industry because we have always invested in opportune technologies for our business. Dempsey’s state-of-the-art processing facility in Jessup, PA opened to both local and industry acclaim for it's technology. Dempsey is committed to leveraging technologies that control our customers' costs and enhance their service experience. Financial Strength Dempsey has grown rapidly, yet responsibly, over the past five years. Through five strategic acquisitions, a well-developed management team, and excellent banking relationships, Dempsey has welcomed hundreds of new customers and enhanced existing customer relationships. Environmental Leadership Dempsey Uniform & Linen Supply is committed to a sustainable future through environmental stewardship and conservation of the earth's natural resources. Dempsey has become a leader in both the textile rental industry and our local community in preserving our environment. Continuity for Keeping Promises The Dempsey Difference is about our commitment to keeping promises. A commitment that extends to every single one of our employees, many of whom have spent most of their careers with us. As a result, the same people that make our promises will be there to fulfill them. It all makes for a really promising future. We hope you'll consider joining the Dempsey Family and continue our legacy of keeping promises. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionCOMPANY OVERVIEW: At F.P. Developments, Inc., we recognize that our employees are our greatest asset. We foster a supportive environment where each team member’s unique strengths and perspectives are valued. Our state-of-the-art, 25,000 sq. ft. climate-controlled facility is a hub for innovation and collaboration, empowering our team to grow both personally and professionally. For 60 years, F.P. Developments has been a cornerstone in the pharmaceutical, biotech, and medical device industries. Established in 1963, we leverage the latest technologies and good old-fashioned ingenuity to solve today’s manufacturing and compliance challenges, consistently meeting our customers' specific requirements with precision and dedication. Join us and be a part of a legacy of quality and innovation. F.P. offers full medical, dental and vision benefits as well as 401k matching, holidays and PTO. SUMMARY: As an Electromechanical field service technician at F.P. Developments, you will train and assist in the fabrication, assembly, electrical wiring, controls programming and servicing of machines and robots used in primary pharmaceutical manufacturing and hospital pharmacy compounding. You will be a self-starter, a quick learner, and open to advancement and travel opportunities. You will also participate in our innovation process, offering suggestions around new capability development. THIS POSITION REQUIRES 15-20% TRAVEL ANNUALLY DUTIES AND RESPONSIBILITIES: • Assembling machines and robots:, • Utilize electrical and mechanical blueprints and schematics to assemble large and small machinery, • Collaborate with engineering and fabrication staff to ensure high quality, durable construction, • Analyze controls programming for PLC and robot automation to troubleshoot and simplify code structure, • Servicing and refurbishing machines and robots (onsite and in the field):, • Troubleshoot and fix machine issues across mechanical, electrical and controls, • Identify and document preventative maintenance procedures for new machines, • Inspect mechanical components for wear and electrical panels for loose and missing components and recommend necessary fixes, • Replace worn or missing parts and ensure machine functionality, • Innovation support, • Research issues and recommend potential solutions, • Stay up to speed with new and emerging technologies applicable to our products, • Collaborate across engineering and fabrication departments to select and implement solutions QUALIFICATIONS: • Education:, • High school diploma or equivalent with electromechanical and controls programming experience OR, • Electrical engineering undergraduate experience, • Skills:, • Mechanical aptitude, • Basic understanding of electrical schematics/wiring, • Basic understanding of PLC programming, • Follow through and follow up, • Strong organizational skills with the ability to manage multiple tasks effectively, • Attention to detail, ensuring all tasks are completed accurately and on time., • Ability to manage time effectively and prioritize tasks in a fast-paced environment, • Strong teamwork and collaboration skills COMPETENCIES: • Customer Service: Exceptional customer service skills with a focus on clear, effective communication and responsiveness to customer inquiries and needs, • Attention to Detail: Meticulous in checking and confirming all aspects of logistics operations, including deliveries, shipments, and inventory, • Openness to Feedback: Highly receptive to feedback, seeking continuous improvement and adjusting based on input from colleagues and customers, • Teamwork: Strong team player, able to collaborate effectively with multiple departments and contribute to a positive work environmentPHYSICAL DEMANDS AND WORK ENVIRONMENT:, • Continually required to stand, walk, sit, • Continually required to utilize hand and finger dexterity, • Occasionally required to climb, balance, bend, stoop, kneel or crawl, • Continually required to talk or hear, • Continually utilize visual acuity to operate equipment, read technical information, and/or use a keyboard • Occasionally required to lift/push/carry items up to 100 pounds, • Frequently required to work near moving mechanical parts and always observe safety precautions, • Ability to travel and work independently The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Powered by JazzHR VYpHj30fSs

Job Description MAURY MICROWAVE JOB DESCRIPTION Date: May 2026 Job Title: RF Test Technician FLSA Status: Non-Exempt Department: DC Assembly & Test Reports to (Title): Lead Manufacturing Engineer Brief Summary of Position: Perform RF testing and calibration of instruments, sub-assemblies, RF assemblies, and complete hardware systems. Possess a well-rounded set of mechanical, electrical, and troubleshooting skills. The person hired for this position will work on industry-leading low-phase noise synthesis, analysis, power detection, and satellite link emulation products. Essential Functions of the Position: • Use complex tools such as spectrum analyzers, signal generators, vector-network analyzers, current probes, voltmeters, and precision inspection equipment to test and troubleshoot RF-based equipment in the frequency range of DC to 40GHz., • Use engineering and manufacturing instructions to test assembled electronic units. Ability to read and interpret electrical schematics., • Interpret data by applying a basic understanding of DC and RF: voltage, current, power, insertion loss, return loss, linearity, phase noise, noise figure, and spectral analysis., • Determine acceptable versus faulty performance. Repair and adjust as required using standard troubleshooting techniques., • Repair or replace defective or improperly functioning circuitry and electronics components using hand tools and soldering iron., • Maintain system logs to document testing and equipment operation., • Record and analyze data results from standard test routine formats., • Ability to manage multiple tasks and meet established deadlines. Requires good planning, organization, and time management skills., • Diligent in following ESD protocols., • Maintain a clean, safe work area compliant with ISO procedures, policies, and regulations., • Ask questions when instructions are not understood or are unclear. Requirements (education, prior work experience, special skills, etc.) • High school diploma or equivalent and 5+ years of formal electronic and mechanical assembly experience., • Ability to read and interpret electronic and mechanical diagrams., • Familiarity with cavity filters and frequency converters is a plus., • Simple programming skills is a plus., • Strong assembly and RF test skills., • Ability to use basic hand tools and soldering iron., • Excellent communication skills; good analytical and problem-solving skills., • Works well as part of a small team with high output., • Computer proficiency using various software programs (Microsoft Office, Factory test software), • Knowledge of Excel formulas Benefits We offer the following benefits to full-time employees who have met all eligibility requirements: • Group medical, dental, and vision plans, group life/AD&D, and long-term disability insurance., • Group 401(k) plan with company matching contributions., • Paid time off and company-paid holidays. Physical Demands/Sensory Function: Frequency of Use: Stand Frequently Walk Frequently Sit Regularly Use hands Regularly Reach with hands and arms Regularly Climb or balance Occasionally Stoop, kneel, crouch, or crawl Occasionally

Job Description Job Title : Tech1, Product Development Engineering Location : Franklin Lakes, NJ, US, 07417 Contract Type : 12 months on W2 Shift : 1st shift Payrate : $23 -$26/hr Job Summary: The Laboratory Technician I Contractor in the Materials & Characterization R&D group will be responsible for conducting testing /experiments; writing technical reports; supporting test request workflow and operation of equipment in the materials characterization labs. They will ensure compliance with Client quality policies, procedures and practices through appropriate communication, training and education of sound quality assurance principles; ensure compliance with all local, state, federal and Client safety regulations, policies and procedures. Project Responsibilities: • Reporting to the Lab Manager, the incumbent performs bench-level engineering tests and/or research experiments designed to test the feasibility of concepts or technologies required for development or revision of new products., • Lab Organization: Follow and support the workflow process for the materials R&D labs including instrument operation and maintenance. Follows GLP., • Process Effectiveness: Ensure appropriate processes are followed for effective and timely stakeholder engagement and completion of assignments., • Continuous Learning: Actively seek training to improve skills. Ensure technical lessons are reviewed, learned and disseminated. Leadership • Accountability: Demonstrate strong and clear accountability for the successful and timely completion of assigned tasks., • Communication: Hold and encourage frequent formal and informal communication within the team. Required Qualifications • Bachelor’s Degree in a Technical or Science Field., • 0-5 years relevant experience in a technical discipline, or a combination of equivalent education and experience., • Experience with polymer characterization / testing instruments and equipment., • Training in laboratory safety and procedures., • Good communication skills (written and verbal). Desired Qualifications • Experience operating one or more specific instruments / equipment including Instron mechanical tester; TGA; DSC; FTIR; Rheometers, Profilometers; is desired., • Good technical skills and judgment., • Basic understanding of disciplined product development processes, regulatory and quality requirements., • Strong fit with Client values., • Experience with basic statistical analysis and software (e.g. Minitab) preferred., • Proficient in MS Office / Word / Excel / PowerPoint.

Job Description Job Title: Aseptic Technician Job Description • The Aseptic Technician plays a key role in supporting sterilization operations within ISO 6 and ISO 7 cleanroom environments., • This position focuses on washing glassware and medical components, performing aseptic cleaning and sterilization tasks, maintaining aseptic samples, and monitoring process systems and equipment to ensure proper operation., • The role requires adherence to GMP and SOP guidelines, accurate documentation, and active participation in safety and quality practices on a consistent basis. Responsibilities • Wash glassware and medical components using designated equipment in accordance with established procedures., • Work in ISO 6 and ISO 7 cleanroom environments while wearing all required personal protective equipment (PPE)., • Perform aseptic cleaning and sterilization activities to support pharmaceutical, medical device, and biotech operations., • Maintain aseptic samples and ensure they are handled and stored according to GMP and SOP requirements., • Monitor process systems and equipment to verify proper operation and promptly report any deviations., • Perform daily and weekly preventative maintenance tasks on equipment and assist the maintenance team as needed., • Participate in safety committees and strictly adhere to all safety rules, procedures, and regulations., • Accurately complete all required documentation, including batch records, reviews, and other GMP-related forms., • Clean, sanitize, and disinfect workstations before and after use to maintain a sterile and orderly environment., • Demonstrate strong attention to detail and maintain high accuracy in all work performed., • Perform additional tasks as assigned by the supervisor to support ongoing operations and projects., • Adapt to different processes and workflows depending on the project requirements. Essential Skills • 12 years of industry experience in aseptic processing, sterile processing, pharmaceutical, or related GMP environments is ideal., • Hands-on experience working in cleanroom or laboratory environments with aseptic techniques., • Strong knowledge of GMP principles and the ability to follow SOPs consistently., • Experience with aseptic cleaning, sterilization, and aseptic technique in operational settings., • Ability to handle, review, and maintain batch records in alignment with good documentation practices., • Basic computer skills to work within internal databases and electronic documentation systems., • Proven punctuality, flexibility, and strong work ethic in a production or laboratory environment., • Ability to wear required PPE and gown for extended periods while maintaining compliance with cleanroom protocols. Additional Skills & Qualifications • Experience in pharmaceutical, compound pharmacy, medical device, biotech, or related GMP industry., • Experience in cleanroom operations and sterile processing environments., • Familiarity with operation of sterilization equipment and process systems., • Commitment to long-term growth and development within the organization., • Strong attention to detail and accuracy in both technical tasks and documentation., • Comfort working with a home-grown internal database and learning new systems., • Ability to collaborate effectively with safety committees and cross-functional teams. Work Environment • This role is based in ISO level 6 and 7 cleanroom environments focused on steam and dry heat sterilization for pharmaceutical, medical device, and biotech applications., • The position requires gowning and wearing full PPE for 610 hours at a time, with scheduled breaks provided during the shift., • The standard schedule is 2nd shift, Monday through Friday, from 2:00 p.m. to 10:30 p.m., • The facility emphasizes strict GMP compliance, SOP adherence, and robust safety practices., • The work setting offers lab expansion and growth potential, providing opportunities to develop skills and advance within a highly regulated and quality-driven environment.Job Type & Location This is a Contract to Hire position based out of Fairfield, NJ. Pay and Benefits The pay range for this position is $23.00 - $24.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Fairfield,NJ. Application Deadline This position is anticipated to close on Oct 23, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications withoutregard to race, sex, age, color, religion, national origin, veteran status, disability,sexual orientation, gender identity, genetic information or any characteristic protectedby law. If you would like to request a reasonable accommodation, such as the modification oradjustment of the job application process or interviewing process due to a disability,please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance:Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in thecity and county of San Francisco, we will consider for employment qualified applicantswith arrest and conviction records. Massachusetts Lie Detector:It is unlawful in Massachusetts to require or administer a lie detector test as acondition of employment or continued employment. An employer who violates this lawshall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI):We may use Artificial Intelligence (AI) to support parts of our hiring process,including sourcing, screening, and evaluating candidates. AI helps assess applicationsand qualifications, but final decisions are made by our hiring team. By applying, youacknowledge and agree that your application may be reviewed using AI tools.

Job Description Job Title: Sterile Processing Technician Job Description • The Sterile Processing Technician plays a key role in supporting sterilization operations within ISO 6 and ISO 7 cleanroom environments., • This position focuses on washing glassware and medical components, performing aseptic cleaning and sterilization tasks, maintaining aseptic samples, and monitoring process systems and equipment to ensure proper operation., • The role requires adherence to GMP and SOP guidelines, accurate documentation, and active participation in safety and quality practices on a consistent basis. Responsibilities • Wash glassware and medical components using designated equipment in accordance with established procedures., • Work in ISO 6 and ISO 7 cleanroom environments while wearing all required personal protective equipment (PPE)., • Perform aseptic cleaning and sterilization activities to support pharmaceutical, medical device, and biotech operations., • Maintain aseptic samples and ensure they are handled and stored according to GMP and SOP requirements., • Monitor process systems and equipment to verify proper operation and promptly report any deviations., • Perform daily and weekly preventative maintenance tasks on equipment and assist the maintenance team as needed., • Participate in safety committees and strictly adhere to all safety rules, procedures, and regulations., • Accurately complete all required documentation, including batch records, reviews, and other GMP-related forms., • Clean, sanitize, and disinfect workstations before and after use to maintain a sterile and orderly environment., • Demonstrate strong attention to detail and maintain high accuracy in all work performed., • Perform additional tasks as assigned by the supervisor to support ongoing operations and projects., • Adapt to different processes and workflows depending on the project requirements. Essential Skills • 12 years of industry experience in aseptic processing, sterile processing, pharmaceutical, or related GMP environments is ideal., • Hands-on experience working in cleanroom or laboratory environments with aseptic techniques., • Strong knowledge of GMP principles and the ability to follow SOPs consistently., • Experience with aseptic cleaning, sterilization, and aseptic technique in operational settings., • Ability to handle, review, and maintain batch records in alignment with good documentation practices., • Basic computer skills to work within internal databases and electronic documentation systems., • Proven punctuality, flexibility, and strong work ethic in a production or laboratory environment., • Ability to wear required PPE and gown for extended periods while maintaining compliance with cleanroom protocols. Additional Skills & Qualifications • Experience in pharmaceutical, compound pharmacy, medical device, biotech, or related GMP industry., • Experience in cleanroom operations and sterile processing environments., • Familiarity with operation of sterilization equipment and process systems., • Commitment to long-term growth and development within the organization., • Strong attention to detail and accuracy in both technical tasks and documentation., • Comfort working with a home-grown internal database and learning new systems., • Ability to collaborate effectively with safety committees and cross-functional teams. Work Environment • This role is based in ISO level 6 and 7 cleanroom environments focused on steam and dry heat sterilization for pharmaceutical, medical device, and biotech applications., • The position requires gowning and wearing full PPE for 610 hours at a time, with scheduled breaks provided during the shift., • The standard schedule is 2nd shift, Monday through Friday, from 2:00 p.m. to 10:30 p.m., • The facility emphasizes strict GMP compliance, SOP adherence, and robust safety practices., • The work setting offers lab expansion and growth potential, providing opportunities to develop skills and advance within a highly regulated and quality-driven environment.Job Type & Location This is a Contract to Hire position based out of Fairfield, NJ. Pay and Benefits The pay range for this position is $23.00 - $24.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Fairfield,NJ. Application Deadline This position is anticipated to close on Oct 13, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications withoutregard to race, sex, age, color, religion, national origin, veteran status, disability,sexual orientation, gender identity, genetic information or any characteristic protectedby law. If you would like to request a reasonable accommodation, such as the modification oradjustment of the job application process or interviewing process due to a disability,please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance:Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in thecity and county of San Francisco, we will consider for employment qualified applicantswith arrest and conviction records. Massachusetts Lie Detector:It is unlawful in Massachusetts to require or administer a lie detector test as acondition of employment or continued employment. An employer who violates this lawshall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI):We may use Artificial Intelligence (AI) to support parts of our hiring process,including sourcing, screening, and evaluating candidates. AI helps assess applicationsand qualifications, but final decisions are made by our hiring team. By applying, youacknowledge and agree that your application may be reviewed using AI tools.

Job Description Will not relocate. US citizens need only to apply. Eastern Industrial Automation, Inc. (EIA) is seeking an experienced Vibration Technician for its growing customer base throughout the NJ, NY, PA, MD marketplace. We have an existing team of well-trained Field Analysts and Technicians to support this newly created position. EIA is a well-established Industrial Distributor, Manufacturer and Field Service Company to tens of thousands of customers throughout the East Coast. Due to our much decentralized, self-starting, professional family culture, we are growing at an aggressive pace! We are seeking a new team member to perform data collection and field service, in support of our local sales staff and existing customer base. Responsibilities: • Perform vibration data collection, vibration data analysis, and timely reporting of machine condition findings., • Perform routine and emergent data collection needs, to a diverse customer base., • Evaluate machinery health, and condition of all types of rotating equipment, through detailed analysis of vibration data., • Conduct failure analysis of rotating equipment to determine root causes of failure and help determine solutions to prevent reoccurrences., • Perform supportive services such as laser alignment, dynamic balancing and oil analysis, • Perform troubleshooting of equipment and instrumentation related to data collection systems., • Perform select field services such as changing sheaves and belts., • Interface with existing key company stakeholders, to grow business including Automation Specialist, Hydraulic Specialist, Pneumatic Specialist, Field Service Technicians. Qualifications: • Proven experience including certification of ISO category one or equivalent preferred with machinery vibration analysis, • Minimum of two years’ experience in vibration data analysis., • Knowledge of vibration data and analysis techniques., • Experience interfacing with internal teams and external suppliers., • Strong mechanical aptitude and experience working around rotating equipment., • Experience with machine learning and innovation in machinery health assessments is preferred., • Must be willing to travel throughout the local designated market areas., • Must be a U.S. citizen or legally authorized to work in the United States We offer comprehensive medical and dental plans, vacation days, sick days and a diverse 401k selection with Company matching. Eastern Industrial Automation provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. The position is 40 hours a week; Monday through Friday, 8AM – 5PM and will report directly to the Engineering Service Manager. An automobile will be provided, gas card, laptop, and Emerson CSI vibration software monitoring equipment. Expected travel throughout the select area is 50-60% with occasional overnight stays. With our diversified product offering and customer base we offer a very stable and growing opportunity for the ideal candidate. Are you ready for a rewarding and challenging career in the distribution/manufacturing industry? We are looking for the best of those who are not afraid to roll up their sleeves to grow with our organization personally and professionally? Powered by JazzHR jIKtwG9aQe

Job Description We are seeking an experienced Quality Technician 3 to support product development, prototype evaluation, and quality testing in an engineering lab or machine shop environment. The ideal candidate will have strong hands-on mechanical and electrical skills, experience with workshop tools and test equipment, and the ability to troubleshoot product issues while maintaining laboratory safety and quality standards.

Job Description Job Title: Lab Technician I – Instron Mechanical Testing Location: Franklin Lakes, NJ 07417 Shift: 2nd Shift, Monday–Friday, 2:00 PM–10:30 PM Pay Rate: $26–$28/hr on W2 Job Description: Seeking a Lab Technician I to support laboratory operations, engineering testing, design verification, stability testing, and test method development. Responsibilities include performing bench-level tests, assisting with equipment qualification (IQ/OQ) and test method validation (TMV), troubleshooting testing issues, reviewing test requests, and maintaining accurate laboratory documentation in compliance with GLP and GDP standards. Requirements: • Education: BS or AAS degree with 0 years of experience, OR High School Diploma with 4+ years of laboratory or regulated-industry experience., • Basic laboratory testing and bench-testing skills., • Ability to follow SOPs and maintain accurate test documentation., • Good written and verbal communication skills., • Knowledge of laboratory equipment and basic troubleshooting., • Ability to stand while performing tasks and lift up to 50 lbs., • Ability to work in a laboratory environment using PPE and handle potential exposure to chemicals or biological fluids. Must-Have Skills Instron Axial and Torsional Testing Equipment experience and nice to have a Bluehill Universal Preferred Skills: • Design Verification (DV) testing., • Test Method Validation (TMV) and Test Method Development (TMD)., • Equipment Qualification (IQ/OQ)., • Good Laboratory Practices (GLP) and Good Documentation Practices (GDP)., • Experience in medical device, pharmaceutical, biotechnology, or other regulated industries.

We are seeking an experienced Quality Technician 3 to support product development, prototype evaluation, and quality testing in an engineering lab or machine shop environment.

This role is ideal for someone with a strong IT foundation who wants to sharpen their troubleshooting skills, work with modern Microsoft technologies, and move toward a Level 2 engineering path. We are a fast-growing Managed Services Provider hiring an IT Help Desk Technician to support users across

Job DescriptionEnergy Control is a field service controls company and has been in business since 2001. We provide scheduled service and emergency support in Industrial Boiler Rooms and Power Plants. We specialize in watertube and firetube boilers, burners and control systems. We also provide turnkey design-build controls solutions. We service what we sell. The innovation and success of our company has created an opening for a Self-Starting Individual who apply their previous knowledge to move forward with combustion controls. This position is for a Field Service Technician with both mechanical and electrical expertise who can calibrate and replace field devices as well as perform general electrical and burner troubleshooting. Individuals without prior field service experience need not apply. Understanding DC controls is a must. This person must be able to understand electrical drawings and P&IDs. Understanding Combustion and Control Loops is a plus. We typically service North/Central New Jersey and New York City. You must possess a valid driver’s license with a good driving record. A company service vehicle will be provided after a probationary and training period. The ideal candidate will be a self-starter who can work with others as well as work alone. Excellent communication skills are essential for customer satisfaction, retention, and company profitability. · Roles and Responsibilities: • The following is expected:, • Be presentable and meet with the customer to listen, understand, and provide support for equipment problems., • Perform mechanical, electrical troubleshooting and calibration on transmitters, switches, valves, and damper drives., • Perform device replacement, testing and commissioning tasks., • Work safely., • Provide satisfactory clean-up and housekeeping., • Follow-up with customer and provide a detailed service report, discuss a general summary, and determine if follow-up is required., • Upload documentation to the office, provide feedback for future follow-up, equipment ordering and scheduling. · Expectations:, • Must be fluent in English (written and verbal skills), • Must have prior field service experience in a technician role., • Must be Safety Oriented., • Must possess critical thinking and problem-solving skills., • Must be able to read electrical line and loop diagrams., • Must be able to follow instructions., • Understand 4-20mA analog electrical signals., • Understand 3-15psig pneumatic signals and electrical I/P transducers., • 120 VAC Control Signals., • Reading and understanding electrical prints and ladder logic diagrams., • Reading gages., • Participate with our internal knowledge sharing., • Be able to tolerate loud environments with occasional temperature extremes., • Understanding Combustion and Control Loops is a plus., • Experience performing Combustion Tuning is a plus. Previous Work Experience Preferred:, • Previous experience in a commercial or industrial setting working on controls systems., • Commercial or Industrial HVAC experience, • Auto Technician or Electrical Technician with experience in an Industrial and/or Commercial setting. · Minimum Education/Certification and Other Requirements:, • High School diploma or equivalent AND one of the following:, • Technical degree/certificate., • Associate’s degree in electrical or mechanical engineering technology, • 3-5 years relevant field experience., • Fluent in English, both written and verbal., • Must be a US Citizen. · Physical Demands/Unusual Working Conditions: 95% of work involves site visits to customer with 30 minutes to 1-1/2 hours away in NJ and NYC. Most site work is typically indoors within Industrial Boilers Rooms and Power Plants in Hospitals, Pharmaceutical, Chemical and Manufacturing Companies. Some work may be outdoors at Cogen Facilities. Must be willing to be on call to respond to emergency service calls. Must be able to list 50lbs. · Computer Skills: Must have strong skills using Microsoft Word, Excel and Outlook. PLC or blockware experience is a plus. · Company Benefits: Energy Control will provide competitive salary with overtime based upon experience, Family Medical benefits (employee portion is 100% company-paid), 401K with 6% match, Holidays, Vacation (time is based on years of company service) and cell phone allowance.

Job Description C Squared Systems, LLC is an RF engineering, consulting, and software development company specializing in providing services for seamless wireless coverage from RF analysis to design and implementation of DAS systems and Wi-Fi networks to remote monitoring and management of complex multi-vendor environments. Site Portal®, a customizable Web-based software, was engineered by C Squared Systems to remotely monitor and manage these complex multi-vendor environments. Since 1999, C Squared Systems has executed turnkey in-building wireless solutions using state-of-the-art analysis tools to deliver RF solutions that exceed project scope and customer expectations. Our experience, technical expertise, and diverse projects in the wireless realm have allowed C Squared Systems to continually evolve as new technologies are developed and the demands of our customers change. Description C Squared Systems is currently seeking a mid-level RF Field Technician to join our team. One the main responsibilities for the Field Technician will be assisting with the installation and construction of various distributed antennas systems. The candidate will also become familiar with RF concepts and best practices and be exposed to a variety of test equipment. They will become an integral part of a team to ensure the systems are installed per the procedures and regulations mandated by the customer. The candidate must have previous construction experience and be very comfortable interacting with customers and co-workers on a daily basis. This is a hands-on position that requires the candidate to be on his/her feet throughout the day. Candidates have room for growth if they show exemplary performance, which can lead to a position of construction management for larger scale projects. This position will require the individual to be in the field 95% of the time. The candidate must be available to travel with potential overnight stays up to 50% of the time and be available for night shifts/weekends when needed. This is a full time hourly position with at least 40 hrs per week. Primary Responsibilities • Installation of various coaxial cable types of various sizes (1/2”, 1/4”, 7/8”, etc.)., • Installation of various fiber cables and fiber heads (single/multi-mode, LC, SC, FC, ST, etc.)., • Perform cable terminations and fusion splicing., • Perform a variety of testing such as sweep and PIM., • Work hands on with spectrum analyzers, transmitters, and other electronic test equipment., • Perform site surveys and in-depth walkthroughs., • Installation and repair of various DAS equipment from a variety of manufacturers., • Maintain test equipment and tools for continuous use., • Travel to various job sites within the tri-state and outlying regions (NY, PA, NJ, CT). Requirements • 2 year college degree. Related coursework a plus., • 3 to 4 years of construction experience. Previous experience with DAS construction and other cellular systems is preferred., • General construction knowledge and know-how. Existing OSHA certifications are a plus., • Ability to read and interpret cabling diagrams and construction drawings., • Proficient with using various tools such as drills, saws, torque wrenches, crimpers, etc., • High attention to detail and excellent ability to multi-task is crucial., • Has the desire to learn and advance within a technical field., • Proficient with using standard computer applications (Outlook, Word, Excel, etc.)., • Comfortable working in the field and have availability for nights/weekends., • Must have a valid driver’s license with reliable transportation. May be required to be fully vaccinated for Covid-19

Job Description Join ProMach and shine. Whether you're creative, strategic, persuasive, or mechanically inclined, there’s a place for you here. Be a problem-solver, a closer, a futurist - whatever drives you. At ProMach, you'll be challenged and rewarded as you help improve packaging performance and shape the future of automation. And we’ll be proud to have you on the journey. Do we have your attention? Keep reading. Pace Packaging is seeking a talented Field Service Technician/Assembler to contribute to the success of the organization through technical field support to continue our strong customer loyalty and recognition as a leader in customer service. The successful candidate will demonstrate excellent technical installation, start-up and troubleshooting skills. Do you love to travel? Passionate about serving as a brand ambassador? Feel fulfilled by solving technical challenges? Our field service team specializes in keeping our machine performance strong. Our team is dedicated to staying calm while acting quickly, finding solutions, and exceeding customer expectations. We offer rewarding, challenging opportunities throughout the world, across multiple packaging segments. If you are energized by providing best-in-class customer experiences and strive for advanced technical skills, we want to talk to you. Do we have your attention? Keep reading. Pace Packaging is seeking a talented Field Service Technician/Assembler to contribute to the success of the organization through technical field support to continue our strong customer loyalty and recognition as a leader in customer service. The successful candidate will demonstrate excellent technical installation, start-up and troubleshooting skills. Does this work interest you? • Perform installation at customer location (electrical and mechanical) of Pace automated unscrambling machinery., • Perform in-factory startup\commissioning of Pace machinery at customer location. The technician is required to troubleshoot and make adjustments in order to achieve the machine efficiency rates per the contract. Training plant personnel is required., • Perform in-factory repair/servicing of Pace machinery at customer location. Services include troubleshooting machinery inefficiencies and making required adjustments, performing audits, installing upgrades, and follow-up operator training., • Generate detailed service reports., • Engage with customers in pursuit of aftermarket sales opportunities including machine upgrades or retrofits, additional service opportunities, and recommendations on stocked spare parts., • Set up and testing of variable frequency drives, and servo controllers., • Build, set up, perform factory acceptance testing on new equipment at the manufacturing facility, • Provide support in the shop as an Assembler during periods when field assignments are not scheduled., • Work flexibly between field and shop operations, assisting with assembly tasks in the shop when not performing field duties. If this sounds like you, we want to connect! • High School Diploma, associate's degree in related technical field (mechanical and electrical) preferred., • Strong mechanical and electrical background with custom machine start-up/repair/maintenance experience preferred., • Basic knowledge of Allen Bradley Programmable Logic Controllers., • Ability to read & understand engineering designs, including wiring schematics., • Proficient in Microsoft Office software for technical reports and training requirements., • Good communication and interpersonal skills and a strong customer service focus to work toward getting a customer up and running as soon as possible., • Good problem-solving skills and independent judgment., • Ability to conduct a high-level training program with customer personnel on equipment., • Ability to work independently, maintain a positive attitude and work well with all levels of management and operators., • Willingness to travel greater than 75% of the time, both domestic and internationally. Non-travel time will be spent working in the plant. Qualifications: Preferred Dedicated: Devoted to a task or purpose with loyalty or integrity Detail Oriented: Capable of carrying out a given task with all details necessary to get the task done well Enthusiastic: Shows intense and eager enjoyment and interest Team Player: Works well as a member of a group Goal Completion: Inspired to perform well by the completion of tasks Flexibility: Inspired to perform well when granted the ability to set your own schedule and goals Self-Starter: Inspired to perform without outside help Experience: Preferred 3 years: Equipment Manufacturing 3 years: Machine Repair What’s in it for you? There's no monopoly on innovative ideas or limits to how far you can advance with our team. We offer an open, communicative environment that fosters individual initiative. We pride ourselves in being a company where people are happy and choose to build a career. In addition to growth opportunities, as a ProMach employee, you receive more than just a paycheck. Total compensation includes your salary, comprehensive medical/dental programs, as well as life insurance, a generous paid time off program, and a retirement savings plan with a company match. And because we understand the importance of feeling protected, there is no waiting period for benefits – you are eligible on your first day of employment! Please note that the pay ranges listed on external job boards, outside our posting details, do not accurately reflect our internal compensation ranges. Pro Mach, Inc. was named to the Inc. 5,000 list of the fastest growing private companies in the U.S. seven times. We continue to introduce innovative products, enter new markets, expand our global presence, and actively acquire new capabilities. We have the rewards, opportunities, and the market strength of a large organization combined with the entrepreneurial culture of a small, fast-paced company. You will enjoy the benefits of working with a growing company that competes globally, with the personal touch and feel of a smaller company where you can make an impact every day. ProMach is an Equal Opportunity Employer. Pro Mach uses E-Verify to verify employment eligibility of all new hires to work in the United States. Pro Mach is a drug-free workplace. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Base Salary Range: $30.00/hr - $40.00/hr. #Pace #INPAC #ZRPAC

Job Description Reports To: Vice President, Customer Experience Location: Remote/Hybrid with 10% travel nationwide Position Summary The PAHub & Prior Authorization Specialist serves as a trusted consultant to customers and internal teams, helping maximize the value, effectiveness, and adoption of PAHub. This role bridges the gap between product functionality, customer operations, implementation, account management, training, and support. The ideal candidate possesses deep knowledge of prior authorization workflows and PAHub capabilities and can effectively communicate with both operational users and executive stakeholders. The Specialist will participate in customer meetings, support internal teams, provide product demonstrations, identify optimization opportunities, and assist in the development of customer-facing documentation and training materials. This role plays a critical part in ensuring customers achieve their desired business outcomes while helping internal teams deliver consistent, high-quality customer experience. Key Responsibilities Customer Engagement & Advisory • Serve as a PAHub subject matter expert for customers throughout implementation, optimization, training, and ongoing support activities., • Participate in customer calls, workshops, business reviews, and operational meetings., • Develop trusted relationships with customer stakeholders by understanding their workflows, goals, challenges, and business requirements., • Advise customers on industry best practices and optimal use of PAHub functionality., • Identify opportunities to improve customer efficiency, automation, turnaround times, and overall satisfaction., • Proactively monitor customer adoption and recommend process improvements and workflow enhancements. Product Demonstrations & Training • Conduct PAHub demonstrations for prospective and existing customers., • Showcase new features, product enhancements, and best practices., • Deliver customer training sessions tailored to different user roles and operational functions., • Assist customers in understanding how PAHub functionality supports their business and regulatory requirements., • Support onboarding activities for new customers and new customer team members. Internal Team Support • Act as a resource for Account Management, Customer Success, Support, Implementation, Product, Training, and Operations teams., • Participate in internal customer strategy discussions and planning meetings., • Provide guidance on customer workflows, business requirements, and PAHub capabilities., • Help internal teams evaluate customer enhancement requests and identify potential solutions., • Share customer feedback, trends, and opportunities with Product Management and leadership teams. Product Adoption & Optimization • Assess customer utilization of PAHub and identify opportunities for improvement., • Recommend workflow changes, configuration updates, and training opportunities to increase efficiency., • Help customers leverage existing functionality before pursuing custom development., • Support feature adoption initiatives and change management efforts., • Track customer challenges and coordinate with internal teams to ensure timely resolution. Documentation & Knowledge Management • Partner with the Documentation and Training teams to create, review, and improve customer-facing materials., • Validate user guides, training materials, release communications, knowledge articles, and implementation documentation for accuracy and usability., • Assist in developing best practice guides, workflow examples, and process documentation., • Review customer communications to ensure clear and consistent messaging. Voice of the Customer • Gather customer feedback and communicate key themes to Product, Engineering, and Leadership teams., • Advocate for customer needs while balancing product strategy and operational considerations., • Assist in prioritizing customer requests by providing business and workflow context., • Identify recurring customer questions and contribute to continuous improvements in training and documentation. Required Qualifications • 5+ years of experience in healthcare operations, prior authorization, utilization management, PBM, health plan operations, specialty pharmacy, or healthcare technology., • Hands-on experience with PAHub or a similar prior authorization platform., • Strong understanding of prior authorization workflows, operations, and regulatory requirements., • Experience working directly with customers in a consultative or client-facing capacity., • Excellent presentation, facilitation, and communication skills., • Ability to explain complex technical concepts to both technical and non-technical audiences., • Strong analytical and problem-solving abilities., • Ability to manage multiple priorities in a fast-paced, demanding environment with minimal supervision., • Maintain the strictest confidentiality in compliance with HIPAA guidelines., • Highly self-motivated, professional, take-charge attitude with humility and integrity. Preferred Qualifications • Experience supporting SaaS healthcare applications., • Experience in training, customer success, account management, implementation, and/or consulting., • Knowledge of CMS, Medicaid, Medicare, and commercial utilization management processes., • Pharmacy Technician certification, pharmacist, or related healthcare credentials., • Experience creating documentation, training content, or knowledge management materials. Success Measures The PAHub & PA Specialist will be successful when: • Customers are effectively utilizing PAHub functionality and adopting new features., • Customer satisfaction and engagement levels improve., • Internal teams have access to timely, accurate product expertise., • Product demonstrations and training sessions are highly effective and well-received., • Documentation and customer-facing materials are accurate, useful, and easy to understand., • Customer feedback is translated into actionable improvements that enhance the overall customer experience. This position offers a unique opportunity to influence customer success, product adoption, and the overall customer experience strategy while serving as a recognized PAHub expert across the organization. Pay Range: Actual compensation will be determined based on the candidate's experience, qualifications, and work location. Candidates in different geographic markets may be offered compensation that reflects local market conditions. Agadia Health Systems, Inc. is a leading healthcare management technology company addressing the evolving needs of the managed care market with a suite of utilization management solutions in electronic prior authorization, MTM, Part D star ratings & adherence, grievances, and formulary benefit design. Used by the nation’s largest health plans and PBMs, Agadia’s advanced technology solutions help drive operational efficiency, appropriate utilization, compliance, and profitability Agadia is an Equal Opportunity Employer

Job DescriptionCompany Description Applus+ IDIADA is a global partner to the automotive industry, supporting its clients in their product development activities by providing design, engineering, testing and homologation services. As a TOP Employer certified company, we have a large team of more than 3000 professionals drawn from over 22 countries, as well as an international network of subsidiaries and branch offices in 25 countries which ensures that our clients get customized, added-value solutions. IDIADA offers you the opportunity to develop a career in one of the worldwide leading automotive engineering companies. At Applus IDIADA we are looking for talent to help us shaping the mobility of tomorrow with safer, more efficient, and sustainable vehicles. With presence in 22 countries, we offer job positions around the world and internal / transversal mobility within the company. The automotive sector is currently living a moment of deep technological change. At IDIADA, we focus on constant innovation to adapt our services’ portfolio to an ever-changing environment. Therefore, as part of our team, we expect you to be dynamic and eager to learn and grow with us. If you want an opportunity to challenge yourself and enhance your technical skills, to work in a thriving environment and to work alongside world-leading experts, then apply for one of our vacancies. Job Description As part of the testing team, technician will be responsible to execute testing and instrumentation activities as regards Chassis, Active Safety and Durability programs. The role requires someone highly organized, objectively-focused, and with ability to manage their own daily routine. Core Responsibilities The technician should be able to: ● Perform routine vehicle inspections, diagnostics, and maintenance ● Troubleshoot issues across mechanical, electrical, and basic software-facing systems ● Support hardware and software retrofit activity as needed ● Document issues, work performed, parts used, and vehicle readiness status clearly ● Communicate identified issues, repair status, and support needs to operations and support teams ● Help return vehicles to deployment-ready status as quickly and safely as possible ● Follow established safety procedures and use sound judgment while supporting fleet operations Qualifications Minimum Qualifications The technician does not need to be a fully developed autonomous vehicle specialist on day one. The minimum expected baseline is: ● Automotive or electromechanical technician foundation ● Experience performing inspections, diagnostics, maintenance, and troubleshooting ● Ability to work across mechanical and electrical vehicle systems ● Basic Linux familiarity, including terminal navigation and ability to review logs or error outputs ● Clear documentation habits and attention to detail ● Strong communication skills ● Safe work practices and sound operational judgment ● Travel availability Preferred Qualifications The following are valuable, but should not prevent hiring if the minimum baseline is met: ● ASE or OEM technician certifications ● ADAS or sensor calibration experience ● Exposure to LiDAR, radar, cameras, or embedded computer systems ● EV, AV, depot, fleet, or R&D vehicle experience ● Familiarity with tools such as Slack, Jira, Google Suite, or similar systems ● Experience supporting vehicle retrofits, updates, or field issue resolution Additional Information Job Functions: • Must be able to stand, walk up and down hills, bend, kneel, sit for lengthy periods, and use hands for various functions such as typing and using various hand tools., • Must be able to work in all weather conditions for long periods of time., • Must have a flexible schedule and be able to work extended hours. Mandatory overtime and weekends may be required, • Must be able to lift 40 lbs., • Passionate of the automotive world., • Willingness to travel and hour adaptability, including weekends., • Committed with strong service orientation., • Possess a valid California driver’s license, • Travel availability Schedule: • Monday to Friday, • Some weekends APPLUS IDIADA is an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. APPLUS IDIADA is an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law.

Job DescriptionDescription: Atlantis UGS is an Audio Visual Installation company who works with Fortune 100 corporations and supports the legal, corporate, financial, educational, entertainment, hospitality, and medical markets throughout the US. We are actively interviewing at this time for upcoming projects near Cary and Raleigh, NC. Seeking experienced Audio Visual Installation Technicians for Low Voltage Commercial installation. *Commercial Audio Visual Installation experience Required. Live Event/Music Engineering is -NOT- relevant experience Benefits offered to our Atlantis Partners Employees: • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off, • Professional development assistance, • Referral program, • Vision insurance THE AUDIO VISUAL TECHNICIAN WILL BE INSTALLING • Ceiling mounted video projectors, • Speaker systems, • Wall mounted cameras, • Control panels, • Running and terminating of low voltage cabling., • Equipment rack installations, • TVs/TV mounts, • Video walls ETC.Requirements:, • AV Equipment Installation on Commercial Jobsite: 3 years (Preferred), • Ceiling Speaker Installation: 1 year (Preferred), • Large Display Mounting: 1 year (Preferred), • Low voltage: 2 years (Preferred), • Structured Cabling: 2 years (Preferred), • Commercial Audio Visual Installation: 2 years (Required), • It is a Plus to have: OSHA10, OSHA30, SST, • It is a Plus to be certified with Extron, Centron, AMX or CTS License/Certification: • Driver License (Preferred) Willingness to travel: • 25% (Required) Work Location: On the road COVID-19 considerations: All of our customers are requiring onsite technicians to be fully vaccinated

Job Description Position Summary The Hardware Integration Technician is responsible for assembling, configuring, and documenting enterprise storage and server systems in accordance with engineering specifications, Bills of Material (BOMs), and manufacturing work instructions. This role plays a critical part in ensuring systems are accurately built, properly documented, and prepared for testing and deployment. The ideal candidate is detail-oriented, mechanically inclined, and comfortable working with high-value hardware in a fast-paced manufacturing environment. Essential Duties & ResponsibilitiesSystem Assembly & Configuration • Assemble and configure server and storage systems according to BOMs, build instructions, and engineering documentation., • Install SSDs, NICs, expansion cards, and other customer-specified hardware components., • Verify part numbers, system configurations, and component placement to ensure build accuracy., • Apply required labels, serial numbers, and asset tags., • Perform system reassembly and ensure all components are properly secured.Inventory Control & Traceability, • Maintain accurate records of serialized components and system configurations., • Scan and document inventory transactions using internal inventory management systems., • Ensure complete traceability of components throughout the assembly process., • Report inventory discrepancies, shortages, damaged materials, or quality concerns promptly.Quality & Process Compliance, • Inspect hardware components for defects or damage prior to installation., • Verify completed systems meet configuration, quality, and workmanship standards before release to testing., • Follow established ESD, quality, security, and manufacturing procedures., • Identify and escalate build issues, documentation discrepancies, or process concerns.Material Handling & Production Support, • Safely move systems and materials throughout the production process., • Prepare completed units for testing and subsequent production stages., • Maintain an organized and efficient work area., • Support production objectives while maintaining quality and accuracy standards.Requirements, • High School Diploma or equivalent., • 1+ years of experience in computer assembly, electronics manufacturing, system integration, production, or a related technical environment., • Experience working with computer hardware and electronic components., • Ability to read and follow assembly instructions, BOMs, and manufacturing documentation., • Basic computer skills, including data entry and inventory tracking., • Strong attention to detail and commitment to quality.Nice to Have, • Experience building or configuring servers, storage systems, networking equipment, or other enterprise hardware., • Familiarity with SSDs, networking components, and computer hardware installation., • Experience in a manufacturing, production, or ESD-controlled environment., • Experience using ERP, MES, warehouse management, or inventory tracking systems., • Familiarity with serialized inventory tracking and asset management processes. COMPENSATION: The base salary range for this position is $64,000 to $73,000; the exact salary depends on several factors such as experience, skills, education, and budget. BENEFITS OVERVIEW: We offer a competitive benefits package that includes medical, dental, vision, basic life and AD&D coverage, short- and long-term disability, a 401(k) retirement plan, annual discretionary salary increases and bonuses. Employees receive paid company holidays, paid time off, and access to company-paid training. Optional benefits include tuition reimbursement, a 529 college savings plan, pet insurance, legal and ID theft coverage, and other voluntary insurance plans.