Trabajos environmental engineer en Mesa, ArizonaCrear alertas

Crane Aerospace & Electronics is a leading supplier of mission-critical RF, microwave, and millimeter-wave components and subsystems for defense, aerospace, and space platforms. From deep-space satellite payloads to electronic warfare systems and secure communications, our Microwave Solutions division plays a vital role in powering innovation where performance matters most. We are seeking a hands-on Manufacturing Engineer III to join our dynamic team in Chandler, AZ. This is an opportunity to drive manufacturing excellence for highly complex RF and microwave products in a high-mix, low-volume environment supporting next-generation defense and space technologies. What You'll Do: • Lead cross-functional initiatives focused on manufacturing process optimization, cost reduction, and product improvement across our advanced RF/microwave product lines, • Analyze and design manufacturing methods, process flows, tooling, and layout to support efficient production of highly specialized hardware, • Support root cause analysis and corrective actions for yield, quality, and assembly issues in high-reliability microwave product manufacturing, • Participate in DFM reviews for new designs and design changes; provide technical feedback to improve manufacturability and throughput, • Drive improvements in manufacturability for RF/microwave integrated assemblies (IMAs), frequency control devices, up/down converters, filters, and synthesizers, • Develop and maintain detailed manufacturing instructions, routings, and procedures aligned with quality and regulatory requirements, • Mentor junior engineers and act as a technical leader in support of production and engineering teams, • Conduct cost analysis, ROI calculations, and make/buy decisions to support capital investments and business case evaluations, • Serve as a key contributor in cross-functional Material Review Board (MRB) and new product introduction (NPI) teams, • Interface with internal teams, external vendors, and customers to resolve technical manufacturing challenges and enable delivery What You'll Bring: • Bachelor's degree in Mechanical, Electrical, Manufacturing Engineering or related field, • 5+ years of experience in a manufacturing engineering role within a high-reliability electronics or RF/microwave production environment, • Knowledge of manufacturing methods for RF electronics, including soldering, mechanical assembly, bonding, and environmental testing, • Ability to analyze technical drawings, interpret customer specifications, and support high-mix product builds, • Strong working knowledge of Lean principles, root cause analysis, and continuous improvement tools (e.g., 5 Why, Fishbone, PFMEA), • Effective communicator with ability to collaborate across engineering, quality, supply chain, and operations teams, • Experience developing and tracking manufacturing KPIs, creating work instructions, and supporting regulated production (e.g., AS9100, MIL-STD) Preferred Qualifications: • Experience in a defense, aerospace, or regulated electronics manufacturing environment, • Prior work with RF/microwave systems or components a significant plus, • Proficiency in ERP/MRP systems, CAD tools, and process mapping platforms, • Exposure to CBS (Crane Business System) or similar continuous improvement frameworks Why Crane Microwave Solutions? • Join a team solving some of the toughest technical challenges in the defense and space industries, • Contribute to critical systems that keep people safe and connected across the globe-and beyond, • Thrive in a fast-paced, collaborative environment that values growth, ownership, and innovation Apply now to help us advance the next generation of RF and microwave technologies from concept to mission deployment. Top Benefits: As a team member at Crane Aerospace and Electronics, you'll enjoy: \n • \nBenefits: Health care, dental, vision, life and disability insurance starting the first day of the month\n, • \nTime Off: 15 days of paid time off that start accruing your first day at Crane and 12 paid holidays per year.\n, • \n401k Retirement Plan: 401k plan with company match\n, • \nEducation Reimbursement: eligible after 90 days of employment\n\n You can see a list of our benefits at or visit our website at for more information on our company and great opportunities. We are committed to operational excellence and world class processes. We employ Lean manufacturing techniques to optimize manufacturing efficiency and accuracy on all product lines. Our products are known for their technical strength, proven reliability and overall value. In our efforts to maintain a safe and drug-free workplace, Crane Aerospace & Electronics requires that candidates complete a satisfactory background check. FAA sensitive positions require employees to participate in a random drug test pool. This description has been designed to indicate the general nature and level of work being performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. Crane Company. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, gender, sexual orientation, general identity, national origin, disability or veteran status.

Job Description My client is seeking a Facilities Electrical Engineer. This role will act as the system owner and subject matter expert for a variety of Electrical Power systems supporting the Arizona facility. You will be responsible for safety, capacity, reliability, documentation and advanced troubleshooting of electrical power systems that may be up to 12.4kV as well as UPS and Emergency Generator systems. You will own developing documentation such as PM Job plans, operating procedures, troubleshooting specifications & training programs as well as engaging with our electricians and service providers in the field to ensure our power systems are safe and maintained.factory/site in Peoria, AZ. Essential Duties and Responsibilities: • Evaluate production equipment performance and efficiency., • Perform load calculations and select appropriate FEEDERS for system stability., • Conduct preventive maintenance on transformers, generators, UPS, and batteries., • Monitor key equipment in the central control room in real-time, including power consumption., • Develop system documentation (PM job plans, operating instructions, action plans, training) and lead root cause analysis (RCA) for electrical system failures., • Manage PA system operations, including installation, maintenance, and user training., • Ensure maintenance meets OEM and AHJ/Code requirements., • Coordinate with utility providers on load management and downtime., • Manages the Electrical Load Database to ensure distribution and source maintain redundancy and capacity for future expansion. Reviews ground fault, electrical coordination and Arc Flash Analysis and works to mitigate risk., • Develop and review plans, specifications, cost estimates, and safety plans., • Provide training and troubleshooting for electricians to ensure safe switching and subsequent work., • Ensure all requirements as specified by the manufacturer of equipment systems are met, and equipment operations, repairs, modifications, and maintenance meet environmental protection requirements., • Perform additional duties as needed, including ERT. Required Qualifications: • Bachelor's Degree in Electrical Engineering required. • A minimum of 3 years of relevant post education experience as an electrical engineer. • 3+ years of experience in maintenance with extensive knowledge of infrastructure design. • Previous knowledge in the operation of industrial and/or commercial processing equipment, semiconductor or Electric Utility experience is preferred. • Must have knowledge of industry standards, codes and regulations, and the ability to apply to maintenance operation of site Electrical Power systems. • Proficiency with electrical engineering principles, practices, process, design/build, and the application to permitting and project work-related issues. • Demonstrates competence and comprehensive knowledge concerning adjacent disciplines such as controls, water, gas and chemicals or mechanical. • Well-defined specific knowledge of relevant engineering and electrical construction laws, codes, regulations, compliance practices, and record-keeping requirements. • Demonstrated critical thinking and problem-solving skills required to apply technical knowledge to reach conclusions from testing results, data collation, computations, statistical analysis and arriving at the most effective, economical, and logical solution. • Demonstrated effectiveness at coordinating and assertively directing subcontractors. • Experience with Hook-Up & Lay-out - Matrix review of production equipment, preparation of bidding documents, on-site supervision, equipment turn-on, and handover. • For expansion construction, experience performing all tasks related to planning, design, construction, completion, and various permits. Physical Requirements: • Must have the ability to safely climb ladders, and work at elevation from ladders, scaffolding, lifts, roofs, or platforms, and the ability to work in confined spaces. Preferred Qualifications: • Previous experience in the semiconductor/advanced manufacturing industry preferred., • Experience managing cleanroom utility equipment, facility optimization, energy-saving planning, and utility operation preferred.

Job DescriptionSalary: SyberJet Aircraft is a leading innovator in the development of advanced light jets, focused on delivering cutting-edge aviation solutions with a commitment to quality, performance, and safety. We are looking for a highly skilled and experienced Senior Electrical Engineer to join our growing team and contribute to the design, development, and integration of electrical systems for next-generation aircraft. Job Description We are seeking a talented Senior Electrical Engineer with at least 10 years of experience in aerospace electrical engineering to lead the development of electrical systems for SyberJet Aircrafts cutting-edge aviation platforms. This individual will be responsible for the design, testing, integration, and support of electrical systems and components critical to the performance and safety of our aircraft. As a Senior Electrical Engineer at SyberJet, you will have the opportunity to work on highly innovative projects in a fast-paced and collaborative environment, where your expertise will play a key role in shaping the future of aviation. Key Responsibilities • Electrical System Design: Lead the design and development of electrical power systems, avionics, wiring, and control systems for SyberJet Aircrafts advanced jet platforms, ensuring compliance with aerospace industry standards., • System Integration: Work closely with cross-functional teams to integrate electrical systems with mechanical and software subsystems, ensuring compatibility and optimal performance., • Component Selection: Select and validate electrical components, ensuring they meet the required performance, safety, and regulatory standards for aerospace applications., • Testing and Validation: Develop and execute comprehensive test plans, including environmental and system-level testing, to validate the electrical systems performance, reliability, and compliance with relevant standards., • Troubleshooting and Support: Provide technical support during both the design and production phases, troubleshooting complex electrical issues and implementing effective solutions., • Mentorship and Leadership: Mentor and guide junior engineers, providing technical leadership and fostering a culture of collaboration and innovation within the engineering team., • Documentation and Reporting: Prepare detailed technical documentation, including schematics, wiring diagrams, and system specifications, to support development, production, and regulatory approval processes, • Continuous Improvement: Stay informed about the latest technological advancements in electrical engineering and apply best practices to continuously improve SyberJets electrical systems and development processes. Qualifications • Education: Bachelors degree in Electrical Engineering, Aerospace Engineering, or a related discipline. A Masters degree or Professional Engineering license (PE) is preferred., • Experience: Minimum of 10 years of hands-on experience in electrical engineering within the aerospace industry, with a strong track record of successful design and development of electrical systems for aircraft or similar applications., • Technical Expertise: Deep understanding of aerospace electrical systems, including avionics, power distribution, control systems, and safety protocols., • Standards Knowledge: Extensive experience with aerospace industry standards and regulations (e.g., DO-160, MIL-STD-704, FAR Part 23/25)., • Software Proficiency: Proficiency with electrical design and simulation tools (e.g., MATLAB, Simulink, Altium, AutoCAD, Teamcenter, Jira, Confluence or similar) and electrical analysis software., • Problem-Solving Skills: Strong analytical and problem-solving skills, with the ability to address complex electrical issues and develop innovative solutions., • Communication: Excellent communication skills, with the ability to present technical information clearly to both technical and non-technical stakeholders. Preferred Qualifications • Advanced Degree: Masters or Ph.D. in Electrical Engineering or Aerospace Engineering., • Specialized Experience: Experience with electrical systems for business jets, commercial aircraft, or military platforms., • Leadership Experience: Proven ability to lead engineering teams and manage cross-functional projects in a fast-paced, high-performance environment., • Certifications: Relevant certifications such as PMP (Project Management Professional) or IEEE membership are a plus. What We Offer • Innovative Work Environment: Be part of a dynamic team at the forefront of developing advanced aircraft technologies., • Impactful Projects: Contribute to the design and production of next-generation jet aircraft., • Competitive Compensation: Attractive salary and benefits package, including health, dental, vision, and retirement plans., • Collaborative Culture: Join a team of highly motivated professionals working together to push the boundaries of aerospace engineering.

Job Description Hazen and Sawyer is seeking a Wastewater Project Engineer for our Arizona offices located in Tempe, Tucson, and Goodyear. As part of our design and process teams, you will be involved with a wide range of wastewater infrastructure projects. This will encompass all phases of design, including conceptual/feasibility evaluations, project management, preparation of design reports, permitting, development of construction drawings and specifications, and support of construction services. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management, • We foster a work environment low on bureaucracy and high in creativity, • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed, • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK, • Support the development of technical treatment strategies, selection of treatment processes, developing process design criteria, and delivering projects, • Support coordination and collaboration with clients, • Coordination with internal technical specialists in all practice areas and discipline design professionals for project delivery., • Support planning, design, permitting, and construction of wastewater-related projects., • Experience working with interdisciplinary teams to effectively meet the client’s needs, • Candidate shall also be able to support preparation of proposals and presentations, • Bachelor's degree in civil/environmental engineering, • PE license, • 5-12 years of experience in the field of wastewater-related infrastructure, including project engineering/management (planning, design, and construction), • Experience in successfully delivering supporting projects spanning multiple years in collaborative, multi-disciplinary teams, • Proficient in all MS Office based computer software, • Excellent communication and interpersonal skills, and capable of interacting effectively with staff, clients, and regulatory agencies, • Self-starter with attention to detail, • Strong organizational skills, • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job Description Hazen and Sawyer is seeking a Water Treatment Project Engineer for our Arizona offices located in Tempe, Tucson, and Goodyear. This role will support project engineering and management, and the development of water and potable reuse projects throughout Arizona, the Southwest and across the country. You will be a part of the Hazen Water and Reuse practice groups engaging, collaborating, and supporting water and reuse projects, and opportunities across the country as needed Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • Your role will include, project engineering/management, design, planning, operational support with a focus on water treatment / reuse and drinking water projects, • Supporting proposal development., • Mentor junior drinking water staff., • Coordination and collaboration with clients., • Coordination with internal technical specialists in all practice areas and discipline design professionals for project delivery., • Supporting projects to meet client expectations, budgets, and quality requirements., • Following internal Hazen processes to ensure quality delivery of engineering projects for clients., • Technical responsibility for interpreting, organizing, executing, and coordinating assignments on small to medium projects., • Bachelor's degree in civil/environmental engineering, • PE license, • 5-12 years of experience in municipal water treatment, water quality, water treatment technology, or manufacturing, • Experience in successfully delivering projects spanning multiple years in collaborative, multi-disciplinary teams, • Proficient in all MS Office based computer software, • Excellent communication and interpersonal skills, and capable of interacting effectively with staff, clients, and regulatory agencies, • Self-starter with attention to detail, • Strong organizational skills, • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job Description Summary - The Revit Drafter’s focus in a design team is the creation and development of construction documents. This will require the Drafter to coordinate heavily with their Designer to complete the goal. Essential functions - As a Drafter in a design team your personal skills will allow you to coordinate effectively with your Designer and others. During design you are a crucial part of the design team, your professionalism and experience is relied on to complete projects. Your Project Engineer and Discipline lead depends on you for: • As-builds, • Field observations, • File creation in Industrial Designs authoring format, • Sheet creation, • Block/family creation, • Annotations, • Plotting, • Communication and coordination with other disciplines, • Following design standards (text height, annotation standards, view usage etc.), • Maintaining proper file housekeeping (i.e. layers, view allocations, phase allocation etc.), • Client coordination meetings (i.e. workgroup meetings), • Internal coordination meetings, • Discipline coordination meetings, • Meeting minute notation Construction administration - During the construction phase of a project. Our completed package is given to a general contractor to onboard trades for construction. During this phase of a project, we will receive Request for Information (RFI) and Submittals (verification of items being purchased per spec). These are mainly the responsibilities of your designer based on the impact these items will have on construction. An incorrect RFI or submittal could exponentially affect a project and should be taken as seriously as design. Your main responsibilities during this are to: • Revise the package based on RFI response., • Rev cloud and triangles, • Update models, • Convert construction as builds into our design documents for record set (red to black), • Coordinate with other disciplines based on changes., • Attend field walks. Environmental Factors – Field work, Heights, Enclosed spaces, hot/ cold, noisy, and other dangers Physical demands - Sitting, standing, lifting, carrying, reaching, pushing, and pulling Travel required – Some travel may be required Required education and experience • High school Diploma or GED, • Proficient in AutoCAD and Revit, • Associates degree or Autodesk program related certificate of completion Affirmative Action/EEO statement – Industrial Design recruits, hires, employs, trains, promotes, and compensates individuals based on job-related qualifications and abilities. Industrial Design is an equal opportunity employer and values diversity. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, disability status, or any other status protected by law. Applicants please note: This position requires US work authorization, and we are not looking for out of country/outsourced support or remote workers of any kind. This opening is for local candidates residing in the metro phoenix area or those willing to self-relocate to this area only. All positions listed are full time in office roles with no opportunity for hybrid or work from home accommodations. If you are looking to work remote, please do not apply. All Staffing Agencies please take note: Industrial Design LLC will not accept unsolicited resumes or applications from any person/source other than directly from an individual candidate. All unsolicited resumes or applications provided to Industrial Design LLC by any method (Postal mail, Email Fax or Text), including directly to Industrial design by courier or personal delivery will be considered as property of Industrial Design LLC. Industrial Design will never pay a fee or commission for any hiring resulting from the receipt of an unsolicited resume or application. Any submission of an unsolicited resume or application which has delivered to Industrial Design which originates from an agency will be considered to have been referred by the agency free of any charges, fees or commissions. All agencies must obtain written approval from Industrial Design’s Principal, in advance, prior to submission any resumes or applications. Submissions then will only be permitted in conjunction with a fully executed service contract in place between the agency and Industrial Design LLC; service contracts will be specific to exact job openings only. Industrial Design LLC will not pay a fee or commission to any agency or agent that does not have a valid service agreement in place prior to communications related to the open position and potential candidate for that position. Agency agreements must be signed by the Principal member of Industrial Design LLC to be valid, no other Industrial Design LLC employee, representative or member is authorized to bind Industrial Design LLC to any agreements or contracts, written or verbal, regarding the placement of employment candidates by any agency or agent; these aforementioned conditions included any full time, part time, contract, temp to hire and staff augmentation position within Industrial Design LLC.

Job Description Hazen & Sawyer is seeking an Assistant Instrumentation & Control (I&C) Systems Engineer to join our team in our Tempe office. This position will help deliver instrumentation and control system designs for water and wastewater projects to our clients. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management, • We foster a work environment low on bureaucracy and high in creativity, • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed, • Candidate will develop I&C system designs for the water and wastewater industry with the potential for Human Machine Interface and Programmable Logic Controller programming/ configuration work, • Candidate will develop Process and Instrumentation Diagrams (P&IDs), control system architecture drawings, and installation details; prepare instrumentation and control system specifications; prepare cost estimates for projects; and review & approve documentation developed by contractors. Must know how to use AutoCAD or AutoCAD Plant 3D or be willing to learn, • BS in Engineering, • Engineer In Training (EIT) or ability to obtain EIT, is required., • Familiarity with AutoCAD is desired, • Working knowledge of the National Electrical Code (NEC), National Fire Protection Association (NFPA), Life Safety Codes, and other related Codes is desired, • Strong verbal, writing and interpersonal skills are required for coordination with other disciplines and client interface, • Electrical experience is desired, • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job Description Hazen and Sawyer is seeking a Senior Wastewater Project Engineer/Manager for our Arizona offices located in Tempe, Tucson, and Goodyear. As part of our design and process teams, you will be involved with a wide range of wastewater infrastructure projects. This will encompass all phases of design, including conceptual/feasibility evaluations, project management, preparation of design reports, permitting, development of construction drawings and specifications, and support of construction services. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • Developing technical treatment strategies, selecting treatment processes, developing process design criteria, and delivering projects., • Direct coordination and collaboration with clients., • Coordination with internal technical specialists in all practice areas and discipline design professionals for project delivery., • Evaluate progress of the project staff and results obtained and recommend changes to achieve overall project objective, • Planning, design, permitting, and construction of wastewater-related projects., • Experience managing interdisciplinary teams to effectively meet the client’s needs, • Task responsibilities will include project management, preparation of assessment and design reports, performing design calculations, equipment sizing/selection, preparation of construction documents, and support needs for construction management/commissioning., • Fieldwork and site visits from planning through construction may be required with occasional travel., • Candidate shall also be able to lead business development activities including preparation of proposals and presentations., • The position will lead to an increasing level of client development and management commensurate with experience, supported by our local office and firm-wide technical resources, • Bachelor's degree in civil/environmental engineering, • PE license, • 12+ years of experience in the field of wastewater-related infrastructure, including project management (planning, design, and construction), • Experience in successfully delivering projects spanning multiple years in collaborative, multi-disciplinary teams, • Proficient in all MS Office based computer software, • Excellent communication and interpersonal skills, and capable of interacting effectively with staff, clients, and regulatory agencies, • Self-starter with attention to detail, • Strong organizational skills, • Advanced degree (Master’s or Doctorate) in Civil/Environmental Engineering, • Experience managing projects with fees of $2M or more, • Experience negotiating multiple contracts with clients, • Experience recruiting staff, • Engagement in professional society leadership roles, • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job Description Hazen and Sawyer is seeking a Senior Instrumentation & Controls Project Engineer/Manager for our Tempe office. Candidate will lead I&C system engineering services and designs for the water and wastewater industry. This will managing include both in-plant and remote telemetry (SCADA) projects with the potential for HMI/PLC programming/configuration work. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • Preparing Process and Instrumentation Diagrams (P&IDs), control system network diagrams, control panel wiring diagrams, equipment layouts, and installation details., • Site visits, client workshops and manage multiple projects simultaneously, • Coordinating with the other disciplines (process/mechanical, structural, architectural, HVAC, plumbing, electrical, and site civil)., • Performing quality reviews of BIM models, Revit families, and CAD based files used in the production of contract documents., • Bachelor's degree in engineering, • Knowledge of water/wastewater or industrial process instrumentation and equipment., • A minimum of 12 years of relevant experience, • Must know how to use AutoCAD, or AutoCAD Plant 3D, • Control system software configuration/programming, • Electrical design experience is a plus., • Strong verbal, writing and interpersonal skills are essential for coordination with other disciplines, and client interface., • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job Description Summary - The Drafter’s focus in a design team is the creation and development of construction documents. This will require the Drafter to coordinate heavily with their Designer to complete the goal. Essential functions - As a Drafter in a design team your personal skills will allow you to coordinate effectively with your Designer and others. During design you are a crucial part of the design team, your professionalism and experience is relied on to complete projects. Your Project Engineer and Discipline lead depends on you for: • As-builds, • Field observations, • File creation in Industrial Designs authoring format, • Sheet creation, • Block/family creation, • Annotations, • Plotting, • Communication and coordination with other disciplines, • Following design standards (text height, annotation standards, view usage etc.), • Maintaining proper file housekeeping (i.e. layers, view allocations, phase allocation etc.), • Client coordination meetings (i.e. workgroup meetings), • Internal coordination meetings, • Discipline coordination meetings, • Meeting minute notation Construction administration - During the construction phase of a project. Our completed package is given to a general contractor to onboard trades for construction. During this phase of a project, we will receive Request for Information (RFI) and Submittals (verification of items being purchased per spec). These are mainly the responsibilities of your designer based on the impact these items will have on construction. An incorrect RFI or submittal could exponentially affect a project and should be taken as seriously as design. Your main responsibilities during this are to: • Revise the package based on RFI response., • Rev cloud and triangles, • Update models, • Convert construction as builds into our design documents for record set (red to black), • Coordinate with other disciplines based on changes., • Attend field walks. Environmental Factors – Field work, Heights, Enclosed spaces, hot/ cold, noisy, and other dangers Physical demands - Sitting, standing, lifting, carrying, reaching, pushing, and pulling Travel required – Some travel may be required Required education and experience • High school Diploma or GED, • Proficient in AutoCAD and Revit, • Associates degree or Autodesk program related certificate of completion Affirmative Action/EEO statement – Industrial Design recruits, hires, employs, trains, promotes, and compensates individuals based on job-related qualifications and abilities. Industrial Design is an equal opportunity employer and values diversity. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, disability status, or any other status protected by law. Applicants please note: This position requires US work authorization, and we are not looking for out of country/outsourced support or remote workers of any kind. This opening is for local candidates residing in the metro phoenix area or those willing to self-relocate to this area only. All positions listed are full time in office roles with no opportunity for hybrid or work from home accommodations. If you are looking to work remote, please do not apply. All Staffing Agencies please take note: Industrial Design LLC will not accept unsolicited resumes or applications from any person/source other than directly from an individual candidate. All unsolicited resumes or applications provided to Industrial Design LLC by any method (Postal mail, Email Fax or Text), including directly to Industrial design by courier or personal delivery will be considered as property of Industrial Design LLC. Industrial Design will never pay a fee or commission for any hiring resulting from the receipt of an unsolicited resume or application. Any submission of an unsolicited resume or application which has delivered to Industrial Design which originates from an agency will be considered to have been referred by the agency free of any charges, fees or commissions. All agencies must obtain written approval from Industrial Design’s Principal, in advance, prior to submission any resumes or applications. Submissions then will only be permitted in conjunction with a fully executed service contract in place between the agency and Industrial Design LLC; service contracts will be specific to exact job openings only. Industrial Design LLC will not pay a fee or commission to any agency or agent that does not have a valid service agreement in place prior to communications related to the open position and potential candidate for that position. Agency agreements must be signed by the Principal member of Industrial Design LLC to be valid, no other Industrial Design LLC employee, representative or member is authorized to bind Industrial Design LLC to any agreements or contracts, written or verbal, regarding the placement of employment candidates by any agency or agent; these aforementioned conditions included any full time, part time, contract, temp to hire and staff augmentation position within Industrial Design LLC.

Job Description Hazen and Sawyer is seeking a Sr. Project Engineer/Manager, Drinking water for our Arizona offices located in Tempe, Tucson, and Goodyear. This role will involve project engineering and management, and the development of water and potable reuse projects throughout Arizona, the Southwest and across the country. You will be a part of the Hazen reuse water practice groups engaging and collaborating on drinking projects, and opportunities across the country. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • Your role will include project management, design, planning, operational support, and business development with a focus on reuse water projects, • Supporting and developing proposal development., • Helping to identify, hire, supervise and mentor junior staff., • Direct coordination and collaboration with clients., • Coordination with internal technical specialists in all practice areas and discipline design professionals for project delivery., • Managing projects to meet client expectations, budgets, and quality requirements., • Following internal Hazen processes to ensure quality delivery of engineering projects for clients., • Technical responsibility for interpreting, organizing, executing, and coordinating assignments on small/medium/large projects., • Performing planning, studies, design, and support of projects through design, construction, and operation., • Bachelor's degree in civil/environmental engineering, • PE license, • 12+ years of experience in municipal water treatment, reuse, water quality, water treatment technology, or manufacturing, • Experience in successfully delivering projects spanning multiple years in collaborative, multi-disciplinary teams, • Proficient in all MS Office based computer software, • Excellent communication and interpersonal skills, and capable of interacting effectively with staff, clients, and regulatory agencies, • Self-starter with attention to detail, • Strong organizational skills, • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job Description Position Summary My client is seeking a Facilities Fire Protection Engineer who is responsible for supporting Design and Construction as well as leading the Operations and Maintenance team to ensure that our Fire Alarm (FAS) and Fire Protection systems (FPS) as well as our Hazardous Gas Monitoring Systems (HGMS) are always available and meet code. You will work with both internal and external teams to define, design, detail and document the various documents that protect our facilities and employees. This will include development of testing and maintenance procedures to meet NFPA, AHJ and Insurance carrier expectations. You need the ability to understand and interpret laws and regulations related to fire protection for building management. Additionally, you must be capable of maintaining and repairing fire protection systems. This role supports new Outsourced Semiconductor Assembly and Test (OSAT) factory/site in Peoria, AZ. Essential Duties and Responsibilities: • Manage the schedule to ensure that the fire protection aspects of the entire construction project are proceeding on an appropriate timeline., • Ensure fire protection work is being carried out correctly in accordance with all regulations., • Establish maintenance plans for the fire protection facilities of the operational buildings, manage and operate fire prevention systems, and plan and conduct fire drills to prepare for fires., • Provide guidance and support for new manufacturing designs or ongoing retrofits to ensure the factory, office and support buildings remain within code., • Work with third party design vendors to review concept designs and designs in progress to ensure they meet established design standards, local code requirements, and any other requirements of the AHJ., • Commission and operate fire protection system equipment., • Create and manage manuals for fire protection systems., • Operate, manage, and maintain fire prevention systems, and identify and resolve causes of malfunctions and errors., • Develop and conduct inspection plans for fire prevention systems., • Interpret drawings and verify proper construction status., • Develop and conduct fire drill plans., • Contributes recommendations and suggestions for work method improvements, safety, materials, and tools. Required Qualifications: • Bachelor's Degree in Engineering; Associate's Degree from a Technical College may be considered with additional relevant experience in lieu of a BS Degree., • Trade Certification Program is preferred., • A minimum of 3+ years of experience with all aspects of fire protection, fire suppression systems, fire alarm and detection systems, fire-resistant construction, and life safety., • Familiarity with construction and preventive design, including facilities, semiconductor equipment, semiconductor chemicals, suppression, and chemical recognition., • Demonstrated experience in managing and operating fire prevention systems., • Competence in inspecting, maintaining, and repairing fire protection systems., • Knowledge of fire protection laws and regulations which include National Fire Protection Association (NFPA) and International Code Council (ICC) requirements., • Team building, analytical and problem-solving skills., • Effective written, verbal, presentation, and listening communications skills across functional departments and with external customers, contractors, and suppliers., • Computer skills including MS Office with the ability to operate corporate email, spreadsheets, word processing, engineering drawing databases at a highly proficient level., • Willingness and ability to work overtime when needed for business purposes, or to be called-in to work in the event of emergency or business needs. Preferred Qualifications: • Preference for candidates with experience in environmental facilities, large-scale plants, and construction site engineering projects in the semiconductor field., • Highly desirable to have previous experience in the semiconductor/advanced manufacturing industry., • Past experience in managing cleanroom utility equipment, facility optimization, energy-saving planning, and utility operations highly preferred., • Preferred experience in legal appointments and licensing related to trade-specific management. Positin starts off in Tempe AZ and will transition to Peoria AZ

Job DescriptionThis Jobot Job is hosted by: Brian Perkins Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $100,000 - $150,000 per year A bit about us: Consulting firm specializing in geotechnical and environmental engineering, geological services, and construction inspections and materials testing. Founded in 1998, we are now owned and operated by three long time employees. Alpha provides services to a wide variety of public and private clients, and we work on a wide range of projects from small single commercial pads to large master-planned communities. We have developed strong relationships with our clients by providing superb customer service and reliable timely reports. Through these partnerships, we have found success and growth. Why join us? • Strong Family Atmosphere, • Strong Benefits, • Bonuses, • Profit Sharing, • Flexible Schedule, • Strong 401k Matcg Job Details Responsibilities: • Field investigations including test borings and pits with soil classification., • Conduct/oversee percolation tests in the field., • Oversee laboratory tests on soil and construction materials., • Conduct engineering analyses for building foundations., • Development of proposals and final reports, and ensure that client commitments are met., • Takes responsibility for overall project supervision including directing field staff., • Prioritizes projects and tasks to achieve department and company objectives., • Multi-tasks and stays focused on the big picture while addressing daily issues., • Will oversee multiple projects simultaneously., • 5 years’ experience in job offered or as Geotechnical Engineer/Associate Engineer, • General knowledge of construction principles/processes required., • Experience managing field staff with strong organizational, follow-through, and communication skills., • High degree of professionalism and strong work ethic., • 5 years of varied geotechnical/civil construction experience., • Ability to “take ownership" of the job, think independently and be a problem solver., • Proficiency with reading blue prints, plans, specs, contracts, purchase orders, etc., • Proficiency in planning, scheduling, and production., • Proficiency in Microsoft office-Excel/Word and Microsoft Outlook required Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job Description Hazen and Sawyer is seeking a Site Civil Engineer to support water and wastewater infrastructure projects with a strong focus on site design for our Arizona offices located in Tempe, Tucson, and Goodyear. This role involves both hands-on work in layout planning, piping systems, grading, paving, roadways, and stormwater infrastructure, as well as managing various stages of project development, from conceptual design to construction support. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • Design and develop site layout plans including yard piping, roadways, grading, stormwater systems, and paving for water/wastewater projects., • Conceptual and preliminary design efforts, including field visits, data collection, alternatives analysis, and technical reporting., • Perform hydraulic calculations and contribute to hydraulic modeling tasks., • Permitting processes and evaluating design alternatives., • Coordinate work with sub-consultants and ensure design integration., • Prepare technical memoranda, reports, and electronic design deliverables., • Provide construction-phase support by reviewing contractor submittals and responding to RFIs., • Bachelor's degree in Civil, Environmental, or related Engineering field., • 5-12 years of relevant experience in civil/site development., • PE License required., • Strong communication skills and ability to work collaboratively with internal teams and clients., • Skilled in critical thinking and problem-solving for technical challenges., • Proficient in developing construction drawings from sketches, including site layout, drainage, and grading., • Experience in facility and site design planning., • Proficiency with Microsoft Office Suite (Word, Excel, Outlook, PowerPoint)., • Knowledge of local utility codes and permitting procedures., • Familiarity with stormwater modeling tools such as StormWise™, InfoSWMM, or HEC-RAS., • Master’s degree in Civil Engineering., • Comprehensive health benefits (medical, dental, vision, and prescription plans)., • Pre-tax flexible spending plans for medical, dependent care, and transportation., • Short and long-term disability, and employer paid life insurance., • Paid holidays, floating holidays, and paid time off (PTO)., • Employer-contributed 401(k) plan and additional financial planning support., • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships. Starting pay range for this position depends on skills, experience, education and geographical location.

Job Description Cooperidge Consulting Firm is seeking a Civil Project Manager. This opportunity places you at the forefront of a growing, multi-disciplinary team where your leadership, technical expertise, and creativity will directly shape commercial, residential, and industrial developments across Arizona. You will oversee projects from concept through completion, ensuring innovative designs that meet regulatory standards and are delivered on time and within budget. In this role, you will • Lead cross-functional teams on land development projects, including commercial, residential, retail, industrial, and multi-family sites, • Produce comprehensive site drawings in AutoCAD Civil 3D (grading plans, stormwater systems, utility layouts, roadway designs), • Manage permitting processes to ensure compliance with local, state, and federal regulations, • Oversee project schedules, budgets, and deliverables while maintaining client communication, • Mentor staff engineers, promote collaboration, and support professional growth, • Professional Engineer (P.E.) license required, • 8+ years of experience in civil/site development (10+ preferred), • Bachelor’s degree in Civil or Environmental Engineering preferred, but not required if licensed, • Proficiency with Civil 3D and Microsoft Office, • Strong leadership, project management, and communication skills, • Full-time roles offering overtime and weekend work opportunities, • Competitive hourly wages plus potential quarterly bonuses, • Comprehensive health, vision, and dental insurance plans, • Life insurance coverage, • 401(k) retirement plan with company matching contributions, • Paid time off including vacation, sick leave, and holidays, • Opportunities for career growth and advancement, • Employee discount programs and perks

Job DescriptionSalary: Reports To: Senior Project Manager Status: Full-time, Exempt Primary Areas of Focus • Professional Development, • Client Management, • Resource Management, • Proposals & Invoice Management, • Project Lifecycle Core Responsibilities • Manage, lead, and oversee all team activities, including production documents, client management, internal team management, and project financials., • Develop project timelines, including phases, completion dates, and milestones, and establish workflow and project plan., • Responsible for preparing contracts and proposals, including establishing the scope of work, schedules, and fees. Prepare and submit proposals to clients after SPM review. Participate in new project interviews., • Lead project kickoff and closeout meetings andLeads project coordination meetings with internal team members and external design partners., • Serve as the primary client contact to understand goals, ensure the design meets their needs and specifications, and represent the client in public meetings., • Monitor project health by reviewing project plans, design, budgets, billings, schedule, and progress, resolve problems, and coordinate all project activities. Course correct with team members to make sure project objectives are met (including other departments and sub-consultants)., • Delegate project tasks to team members promptly, provide clear direction on tasks and expectations on deliverables, and establish clear deadlines with team member affirmation., • Consult collaboratively with the external project team to achieve project goals., • Responsible for invoice management, including change orders and additional services., • Responsible for managing permit submittal processes and coordination with review authorities. Ability to determine these requirements quickly as project locations vary., • Provide quality assurance and control. Provide direction to technical staff on project issues and general engineering principles., • Responsible for resource management for the project team., • Oversee the Technical engineering components of the project., • Increase the team's overall effectiveness by developing staff, aligning individual team member strengths with appropriate project tasks, identifying potential obstacles (both internal and external), and performing reviews., • Balance staffing and workload through collaboration with the team and SPM, • Monitor the work of team members to ensure that they adhere to industry standards and best practices., • Participate in new hire interviews and staffing selection., • Conduct regular 1:1s with staff and performance reviews in alignment with the performance management cycle., • Initiate lunch and learn for sharing new technology or best practices., • Mentor team members across engineering., • Responsible for completing personal timecards accurately and reviewing and approving associate timecards on time., • Actively involved in developing future business and building relationships with existing clients, 25% of projects should be new business and 75% of projects should be assigned projects or repeat clients., • Communicate effectively (written and verbal) internally (interdepartmental and intradepartmental) and externally (inclusive of clients, sub-consultants, municipalities)., • Participate in the execution of strategic initiatives., • Evaluate company practices and processes to provide input for continuous improvement., • Be an ambassador for EPS at industry events and conferences. May require attending project team and public meetings after hours., • Perform other duties as assigned., • Achieve a 60-70% Billable Utilization Rate. Non-billable activities include company & team meetings, professional development, community involvement, innovation time, culture & engagement activities, learning, and training., • Manage $500k-$1.8M in projects and up to 4-8 staff members. Preferred Skills & Experience • Bachelors degree in civil, Environmental, or related Engineering field., • Professional Engineering License., • Minimum of 10 years of experience with land development projects with a proven record of success as a project engineer and solid technical background., • Professional knowledge of Microsoft Office, Civil 3D, Bluebeam, and Pipe Networks., • Excellent communication and problem-solving skills and a high level of emotional intelligence with the ability to interface both in person and remotely (videoconferencing, phone, etc.)., • Must demonstrate the ability to closely monitor project progress from a financial and schedule front with an eye for identifying scope creep elements., • Promote a positive teamwork environment, and lead and motivate a team in a fast-paced environment., • Strong understanding of civil engineering design processes, plan set preparation, and obtaining agency approvals., • Exceptional organization skills and attention to detail., • Demonstrated ability to work accurately, follow procedures and schedules, and prioritize multiple tasks for highly technically capable individuals in a complex matrix environment., • Effectively delegates tasks (production and administrative) to allow for an increased focus on management tasks., • Required to stand, walk, and sit., • The position may require a visit to project sites occasionally., • The position requires a normal range of hearing., • The employee must be able to lift 40 lbs. occasionally., • Requires prolonged sitting with 15% of the time spent bending and reaching., • Must have manual dexterity sufficient to operate a computer keyboard and calculator., • Noise levels are consistent with a standard office environment. Perks & Benefits • Health, life, 401(k), dental and vision insurance, • Short-term, long-term disability insurance and leave, • Paid holidays, • Paid Time Off, • Bereavement leave

Job Description About Alta E&I Alta Environmental & Infrastructure is one of Arizona’s fastest-growing engineering firms, with nearly 250 employees across the state. We’re 100% Arizona owned and managed, which means you’ll never feel like a number here. Our team delivers a full spectrum of services - civil engineering, surveying, geotechnical and materials testing, environmental, and EHS - giving you exposure to many paths and projects. Alta is big enough to offer opportunity, and advanced technology - yet small enough that you’ll know your team, see your impact, and have leadership that knows you. We’re proud to be a trusted partner to some of the nation’s largest corporations, developers, and public agencies - helping to build the future, while also protecting it through environmental stewardship and sustainable solutions. General Summary: We are seeking a driven and detail-oriented Project Manager to join our Geotechnical team. The ideal candidate will have their Engineer in Training (EIT) certification, a strong foundation in geotechnical principles and/or construction materials testing, and proven experience managing projects from conception to completion. This role will involve both technical and managerial responsibilities, with an emphasis on quality, safety, and client satisfaction. Primary Duties and Responsibilities: • Follow safety rules and standards for all projects., • Engineering professional with responsibility for managing detailed phases of projects with moderate size and complexity., • Independently perform a variety of projects or selected segments of larger projects., • Make design, engineering, and construction recommendations, adaptations, and modifications., • Prepare proposals and reports for small and large projects of varying complexity., • Perform quality control review of proposals written by others., • Evaluate complex laboratory and field data for inclusion in reports. To perform this job successfully, an individual must be able to perform each essential duty proficiently. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Bachelor of Science degree in Civil Engineering, Geotechnical Engineering, or a related field., • Engineer in Training (EIT) certification required., • Minimum 1–3 years of geotechnical or construction engineering experience., • Excellent written and verbal communication skills., • Proficient in relevant software (e.g., MS Office Suite, gInt, or AutoCAD). See your impact. How many people can drive by a highway, school, or major company and say, “I helped build that?” At Alta, every employee can. The work we do is visible in the infrastructure communities rely on every day. We’re passionate about developing people. Many of our leaders began their journey in entry level positions, and worked their way up into management. We invest in you from day one with hands-on training, paid certifications, and mentorship to help you progress in your career. Working at Alta means: • Career mobility: clear paths to grow into leadership roles., • Multi-disciplinary exposure: civil, survey, geotechnical, materials testing, environmental, EHS, etc., • Investment in you: paid certifications and ongoing training., • Culture of belonging: supportive teams where your work is recognized. Benefits • Competitive salary and performance-based bonuses., • Comprehensive health, dental, and vision insurance., • 401(k) plan with company match., • Opportunities for professional development and career advancement.

Job Description At Carvana, we're changing the way people buy and sell cars. With an ambitious vision and a fundamentally different approach designed to be fun, fast, and fair, Carvana became the fastest-growing automotive retailer in history. We expanded nationally, went public on the New York Stock Exchange, sold our 1 millionth car, and reached the Fortune 500, all in just eight years. Today, with 4 million retail customers and counting, Carvana is both the fastest-growing and the most profitable public automotive retailer, and we're just getting started. We continue to raise the bar for our customers as we tackle the enormous opportunity still ahead in the largest consumer vertical. Working here means being part of a team that embraces change, celebrates creative problem solving, and always strives to be better. At Carvana, you'll have the opportunity to take on meaningful challenges, learn quickly, and help shape the future of automotive retail. If you're driven to grow and make an impact as part of a collaborative team, you'll fit right in. Learn more about what it's like to work here from the people that already do. This is a fully on-site position, Monday through Friday, at our corporate HQ in Tempe, Arizona. About the team and position The Engineer, Operations Development is responsible for leading and obtaining buy-in on continuous improvement projects and using lean methodologies to refine processes within Carvana's Inspection Center organization. This position will work closely and communicate with all departments and levels throughout the business to deliver throughput, cost and quality improvements in a fast-paced, dynamic production environment. What you'll be doing: • Create justification for major projects, cost savings greater than $1M within Inspection Center operations, • Obtain buy-in on major projects through effective communication with multiple departments across the organization, • Deliver cost reductions on time and under budget on major projects, and effectively report out on results, • Serve as a subject matter expert in at least three reconditioning processes within the Inspection Center Operations, • Proactively identify opportunities for continuous improvement by developing standard work and visual training within existing processes, • Partner with leadership and departments across the organization to provide direction on the creation of labor standards and line staffing models, • Take existing technology and adapt it to vehicle reconditioning, • Mentor and train peers on lean manufacturing and process flow, • Evaluate complex production issues and conduct root cause analysis, • Create and present business cases for improvement ideas, • Participate in cross-functional continuous improvement events, • Create current and future state value stream maps, • Develop building and cell layouts to optimize workflow, • Ensure compliance with all environmental, health and safety guidelines, • Select and test tools and equipment, • Live the Carvana values To be able to do your job at Carvana, there are some basic requirements we want to share with you. • Bachelor's Degree in Industrial or Manufacturing Engineering, or equivalent experience, in relevant field, • Minimum of 5 years of engineering experience in a lean manufacturing environment, • Knowledge and understanding of lean manufacturing., • Up to 50% travel between Carvana facilities across the U.S., • Experience using AutoCAD, Excel, Word, • Strong analysis and decision making ability, • Ability to work independently, • Valid driver's license with a clean driving record (no DUIs and no more than two moving violations in the last 3 years), • Must be able to lift up to 60 pounds independently; majority of lifting from knee to shoulder heights; other lifting required from various levels, • Requires standing for extended periods of time with frequent stretching, reaching, walking, stooping, pushing, and/or pulling in an environment that may be cold, hot, noisy, and wet and may have fumes or odors due to vehicle maintenance, • Requires use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment, • Ability to work overtime and on weekends, • Ability to communicate and interact with others effectively in a professional, courteous manner To be able to do your job at Carvana, there are some basic requirements we want to share with you. What we'll offer in return • Full-Time salaried position with a competitive salary., • Medical, Dental, and Vision benefits., • 401K with company match., • A multitude of perks including student loan payments, discounts on vehicles, benefits for your pets, and much more., • A great wellness program to keep you healthy and happy both physically and mentally., • Access to opportunities to expand your skill set and share your knowledge with others across the organization. Hiring is contingent on passing a complete background check. This role is NOT eligible for visa sponsorship. Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Please note this job description is not designed to contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description:\n\nDescription: Here at OnQGlobal we hire GREAT PEOPLE who do GREAT WORK for GREAT CLIENTS! Our team members are consummate professionals who are well respected by our Fortune 100 clients in the semiconductor/cleanroom, manufacturing, and mission-critical data center industries. Our mission is to do the very best for our clients and customers with integrity, professionalism, and altruism allowing them to BE the very best in their business globally. Role Overview The Owner’s Rep (OR) will act on behalf of Owner to become a virtual extension of the Owner’s Project Team and will establish an immediate and close relationship with the Owner to gain a complete understanding of the Owner’s Project requirements, goals and constraints, and general business objectives.OR will bring “best practice” and innovative experience to this Project that will facilitate the delivery of efficiencies in terms of design, construction, and operational transition process.OR will comply with the Owner’s standards for quality, optimal cost structure, and on-time delivery, and implement these standards into the overall framework of the Project.OR will act as an extension of Owner’s organization to assist in maintaining project level schedule and cost controls and reporting in line with Owner’s requirements. OR is expected to help enforce policy, gather information, and troubleshoot in the field. OVERALL PROJECT MANAGEMENT General:OR will participate in executive level briefings and decision making processes with respect to the Project in supporting Owner’s internal Project Management team.OR will review and validate Owner’s needs and business requirements for the Project, including functional requirements, environmental standards, levels of quality, commissioning process, and business needs in order to protect Owner’s interests throughout the course of the project .OR will acquire a thorough understanding of and assist in establishing Owner’s requirements for the Project relating to budget, program, and schedule.OR will review and provide timely comment to Owner regarding the Design teams program for the preparation of drawings, specifications, schedules, and all other design and cost information. At all times, OR will act to align and balance design deliverables and construction requirements.OR will provide and (where appropriate) ensure that the Documents make provision for all necessary information required by the local Planning/Building Dept. /Fire Dept. etc and, while not responsible for obtaining permits, act as a partner with Owner and General Contractor in obtaining permits.OR will advise on, and issue appropriate notices on behalf of Owner to the relevant parties in relation to procedures and other practical matters arising under the Project Agreements. Project Agreements are defined as any and all agreements relating to or affecting the Project or the completed Project, or any part which have been or may be entered into by Owner and disclosed to OR whether before, on, or after the date of this Agreement.Risk Mitigation Strategies – OR will continually evaluate the progress of the work and identify potential risks to the project, including risks to quality, budget, and schedule. OR will work with the Owner to determine which mitigation measures are recommended and implement those corrective actions. OR will maintain Risk Log in Owner defined tool and host quarterly Risk Management worksessions.OR will create and maintain at all times, for purpose of daily active management of project delivery, three key tools:Action Item Log, for purposes of tracking the key actions and associated “what”, “when”, and “who” required to maintain the project progression.Milestone Management Log, for purposes of extracting key milestones from Project level P6 file in order to focus team on the right course for project delivery at all times.Procurement Log for purposes of tracking all major goods and services purchases and associated progress in delivery of those Owner provided items.OR will facilitate the review of all Project activities at agreed to intervals (via formal gate reviews with key stakeholders) to verify the Project requirements of scope, budget, and schedule are maintained during the design phase.OR will establish a working relationship with the architects, engineers, consultants and contractors, and provide them with (and maintain through the course of the project) an overview of the Owner’s needs, goals, requirements, restraints, schedule, budget, design philosophy, and any special characteristics associated with the Project.OR will coordinate with the Owner on the type of trade procurement procedures which will be the most effective with consideration for schedule, cost, and financing requirements.OR will work with the Owner and Project Team to consider options and make decisions related to the phased growth into the facility (e.g. MEP Equipment, expansion of raised floor area, building expansion, etc.) over time as the Owner grows into the facility.OR will work to make sure that a progressive and constant safety culture is part of the field execution process. To serve this function, OR will be responsible for making sure GC and other key trades are promoting a behavioral based safety plan and actively administering, managing, and auditing in the field.OR will review the Construction Manager’s Project schedule to verify it is inclusive of actual material lead times and delivery schedules, and advise the Owner of compliance with overall Project goals and objectives.OR will review all contractor claims with respect to cost and schedule impacts, and make a recommendation, having consulted with the appropriate parties, to the Owner on the acceptability of each claim. OR will negotiate claims and financial settlements as appropriate.OR will work to integrate Owner’s operations teams into the project at the right times. Standing Up the Team:OR will coordinate with the Owner’s procurement policies to establish a timeline for the procurement of all remaining consultants, contractors and vendors necessary to execute the Project. These efforts could include (Commissioning Agent, CM/GC, Independent Testing & Inspections, and Independent Financial Audit)OR will work to make sure that Owner’s contract principles and requirements are incorporated into Owner prime and second tier contracts.OR will assist Owner’s internal document management and technical writing team in making sure their requirements and needs are well defined and detailed in the contracting process. For clarity, this is not an expectation for OR to act as Document Control Coordinator (DCC) but rather, assists Owner’s DCC as an agent in the field when needed to help facilitate process or troubleshoot issues.OR will define the process and expectations of bid leveling process for subcontractor selection to the GC and enforce and audit that process.OR will conduct a complete and thorough proposal evaluation and make recommendation to Owner for key trade awards.OR will assist Owner in the preparation of special conditions and general conditions for the Project with specific emphasis including construction phasing and construction sequencing, as well as balance of services between GC and trades.OR will conduct oversee the GC in an assessment of the local construction marketplace to determine capabilities, capacity and overall skill required to deliver a project of this scope and complexity. Vendor Management:OR will conduct a monthly call with the executives or principals from all of the key partners to address any open items, concerns or issues during the execution of the Project. Budget Management:OR will support maintenance of the Project Budget, inclusive of all contract and payment status log for all contracts held directly by the Owner, with the Owner’ project controls team, both regionally and at a corporate level. This includes reconciliation of the capital budget at the completion of the Project. The intent is that the OR acts a facilitator to transfer field level information from various project teams to the centralized project service group.OR will coordinate with Owner’s project control team to facilitate process and data transfer between central services group and the field. For clarity, this is not an expectation for the OR to be a cost controller on the job but rather to audit processes in place between the Owner and GC and troubleshoot issues in accuracy or process as an agent for the Owner. Schedule Management:OR will support implementation by the GC of Owner’s defined schedule tools including integrated P6 schedule format, identifying critical tasks, dependencies, and durations for all major activities within the Project schedule. They will audit to insure it follows proper Owner schedule requirements and resource/unit loading. The intent is that the OR acts a facilitator to transfer field level information from various project teams to the centralized project service group in support of their defined process.OR will study alternative schedules and concurrent activities between projects, and identify opportunities for Owner to improve deliveryOR will incorporate all key milestones in the sourcing of all Project Team members, and include their commitment to those milestones during the sourcing of their respective services and work to insure that all stakeholders are guided by the schedule as opposed to acting as constraints to achieving the schedule.OR will consolidate consultant and contract schedules and evaluate progress such that agreed upon Project Milestones are maintained. Project Reporting:OR will provide bi-monthly Management Reporting in a format acceptable to the Owner that includes up-to-date information.OR will coordinate and co-chair with GC, Project kickoff meeting at start of construction including review of all construction administration process and procedures and creation of documentation for the same.OR will report on matters requiring decision by the Owner regarding the design, specifications, costs, schedule, or program. OR will review these issues with the Owner and make recommendations on critical decisions supported with analysis and data.OR will attend meetings with the Owner, other consultants, and the Construction Manager as needed to keep the project on track.OR will facilitate discussions to identify site specific impacts to the Master Schedule or Conceptual Budget. Design Phase:OR will coordinate with Owner’s Design Manager on the issuance of design documents for review at agreed to intervals (BOD, SDs, DDs, and CDs) to verify the Project requirements of scope, budget, and schedule are maintained during the design phase and align issuances with construction needs.OR will assist the Owner and Architect / Engineer in reviewing the requirements of building codes and other Agencies Having Jurisdiction (“AHJs”) advice on the cost impact of these requirements, and suggest possible alternatesOR will review design progress throughout the preconstruction phase for conformance with Owner’s requirements within the scope of the agreement and recommend economies consistent with these requirements and sound construction practice.OR will advise the architect and Owner during the preparation of the drawings for conformance to Owner’s requirements and advise further with respect to availability and price of the materials; merits of alternative systems; appropriateness of details; extent of off-site prefabrication, constructability review in the context of work site, review and make recommendation on sequencing logistics, etc.OR will monitor the GC in the solicitation of independent trade-by-trade cost estimates based on the plans and update this estimate at the conclusion of the Schematic Design (30%), Design Development (60%) and Construction documents (100%) phases utilizing the contractor(s) for the Project.OR will review the bid documents prepared by the architect and engineer and bring any apparent discrepancies or omissions to their attention prior to issuance for construction.Means and Methods Input. OR will work with Project Team (including Construction Manager, Owner, and design entities) in the development of site access plans, choice of materials, selection of contracting methodology, sequence of work, and rules and regulations as it relates to tactical and strategic Project decisions. Construction Phase:OR will maintain Owner’s on site documentation, when needed, in a secure environment.OR will help lead weekly progress meetings with the design team, GC/CM, and Owner. Minutes taken by the GC/CM will be reviewed to document all open issues and decisions made.OR will review all meeting minutes and make corrections for the project record.OR has as a Project goal to avoid compensated Project delay not occasioned by Owner direct changes and will work to identify and mitigate such circumstances.OR will act as on-site point of contact for Owner’s Project stakeholders and inform Owner on a continuous and ongoing basis as to the budget, schedule and quality implications of Owner’s ongoing activities and decisions during the Project.OR will help facilitate onsite coordination of activities and interaction of all Project Team members. For clarity, this is not to say OR is responsible for coordination of all team interaction, but rather, when issues of collaboration or communication arise, will help to facilitate reasonable solutions and outcomes.OR will review the schedule, construction procedures, and staging operations submitted by the contractor and advise Owner thereon.OR is responsible for the regular onsite monitoring of the construction process with regard to the schedules and procedures established and assist and make recommendations for maintaining and improving construction progress. OR will conduct regulated meetings with construction manager, engineer, architect and Owner to review progress and address any issues that may arise.OR will, on behalf of Owner, make its best efforts to moderate and facilitate resolutions of problems and issues which arise regarding work on the Project site.OR will monitor the contractor’s systems for controlling the progress of the works and monitor the program with the intent that the works will be completed within the time stipulated in the Project specifications. Specific attention will be expected to the transition of information and strategy from the site offices to the field. Technical Testing/Inspection:OR will help source the technical inspection and testing services required by the design team or other third party consultants for services such as concrete testing, structural reviews, moisture testing, etc. OR will put review test reports and raise issues when needed to the Owner.OR will support the Project design and construction teams in addressing any issues and deficiencies identified during technical inspection and third party testing.Submittal Process:OR will monitor the design team a

Job DescriptionDescriptionWilson Engineers is an Arizona-based firm with a staff of more than 100 personnel specializing in water and wastewater engineering and construction management. We are dedicated to delivering ethical, reliable, high quality services to our clients based on innovation, while sustaining a challenging and rewarding work environment for our greatest assets, our employees. We are seeking an experienced, Water/Wastewater Modeling Engineer to join our team. This position requires 40 hours per week in our Tempe office. (This job is not remote.) Essential Duties and Responsibilities • The ideal candidate will have previous experience with water and/or wastewater system hydraulic modeling and planning efforts and have a strong interest in specializing in water and wastewater hydraulic modeling and system planning studies., • The candidate should be able to perform and manage technical work on water and wastewater system modeling and planning studies: evaluating water system water quality, planning water distribution and wastewater collection systems, analyzing historical demands/flows and preparing future demand/flow projections, pumping and storage capacity analyses, integrated water resource planning., • At least 3 Years’ experience in Water Distribution System and Wastewater Collection System Modeling, Master Planning and preparation of reports. Requirements • Civil or Environmental Engineering undergraduate degree with an emphasis in Fluid Mechanics, Hydraulics, and/or Water Resources., • Experience and/or familiarity with Geographic Information System (GIS) technology and GIS software (i.e. ESRI ArcGIS) + Capable in MSWord, MS Excel, and PowerPoint., • Medical Plan, • Vision Plan, • Dental Plan, • Group Life Insurance, • Short Term Disability, • Long Term Disability, • Voluntary Term Life Insurance, • Liberty Mutual Insurance, • Personal Time Off (PTO), • Paid Holidays, • 401(K) Retirement Plan, • Section 125 Flexible Benefits Plan, • Tuition Reimbursement, • Employee Referral Bonus

Job Description About Alta Environmental and Infrastructure Alta Environmental & Infrastructure is one of Arizona’s fastest-growing engineering firms, with nearly 250 employees across the state. We’re 100% Arizona owned and managed, which means you’ll never feel like a number here. Our team delivers a full spectrum of services - civil engineering, surveying, geotechnical and materials testing, environmental, and EHS - giving you exposure to many paths and projects. Alta is big enough to offer opportunity, and advanced technology - yet small enough that you’ll know your team, see your impact, and have leadership that knows you. We’re proud to be a trusted partner to some of the nation’s largest corporations, developers, and public agencies - helping to build the future, while also protecting it through environmental stewardship and sustainable solutions. Position Summary As a Special Inspector at Alta E&I, you'll serve as the day-to-day eyes and ears on construction sites, performing inspections and materials testing in accordance with project specifications and building codes. Areas of inspection may include soils, concrete, masonry, structural steel, fireproofing, and more. Work is conducted independently under the guidance of a Professional Engineer or Project Manager. Responsibilities • Perform field testing, observations, and inspections per project requirements., • Read and interpret construction drawings and specifications., • Draft clear inspection reports for Project Manager review., • Analyze data for accuracy before reporting findings., • Communicate effectively with project teams., • Adhere to OSHA and company safety standards, complete safety training., • Conduct pre-task planning and report safety concerns., • Maintain personal field equipment., • 2–4 years' experience as an Engineering Technician or similar; 5+ years considered for senior roles., • High school diploma or GED., • Valid driver's license and clean driving record., • Strong communication skills (written and verbal)., • Ability to work independently and as part of a team., • Proficiency with interpreting structural plans, • Performing materials testing per standards, and concise reporting., • Physically able to work in varying weather conditions and environments (elevated surfaces, confined spaces). See your impact. How many people can drive by a highway, school, or major company and say, “I helped build that?” At Alta, every employee can. The work we do is visible in the infrastructure communities rely on every day. We’re passionate about developing people. Many of our leaders began their journey in entry level positions, and worked their way up into management. We invest in you from day one with hands-on training, paid certifications, and mentorship to help you progress in your career. Working at Alta means: • Career mobility: clear paths to grow into leadership roles., • Multi-disciplinary exposure: civil, survey, geotechnical, materials testing, environmental, EHS, etc., • Investment in you: paid certifications and ongoing training., • Culture of belonging: supportive teams where your work is recognized., • Competitive pay and bonuses., • Health, dental, and vision insurance., • 401(k) with company match. Alta E&I is committed to a workplace free of discrimination based on age, color, sex, disability, national origin, race, religion, or veteran status. Note: Selected applicants must pass a background check and drug screening.

Job Description About Alta Alta Environmental & Infrastructure is one of Arizona’s fastest-growing engineering firms, with nearly 250 employees across the state. We’re 100% Arizona owned and managed, which means you’ll never feel like a number here. Our team delivers a full spectrum of services - civil engineering, surveying, geotechnical and materials testing, environmental, and EHS - giving you exposure to many paths and projects. Alta is big enough to offer opportunity, and advanced technology - yet small enough that you’ll know your team, see your impact, and have leadership that knows you. We’re proud to be a trusted partner to some of the nation’s largest corporations, developers, and public agencies - helping to build the future, while also protecting it through environmental stewardship and sustainable solutions. We are currently looking for a Construction Materials Field Engineers to join our amazing team in the Tempe area! JOB TITLE: Construction Materials Field Engineer EMPLOYER: Alta Environmental & Infrastructure DEPARTMENT: Geo Technical REPORTS TO: Andrew Capper SUMMARY: Skilled Field Engineer who possess some field level certifications – Not required, can be obtained. Experience within the field would be preferable (Nuclear Safety, ACI, and ATTI). ESSENTIAL FUNCTIONS OF THE JOB: • Regular attendance and punctuality are essential functions of the job. DUTIES AND RESPONSIBILITIES: • Oversee full Post Tension Inspections i.e., pad and trench certification, pre-slab, concrete sampling, stressing, epoxy, and grade verification., • Ability to perform all ATTI certified tests in the field., • Communicate directly with clients and potential clients regarding project needs., • Manage Personal field equipment., • Strictly adhere to OSHA and company safety guidelines., • Adhere to Alta Southwest company policies., • Ability to complete in house training., • High School Diploma or GED required., • Valid Arizona driver's license and acceptable driving record., • All field level certifications (Nuclear Safety, ACI, and ATTI field). Preferred not required, • 3 + years of experience sampling/testing soils and ABC from job sites and roadways., • Good written and verbal skills., • City of Phoenix certified tester or ability to secure certifications within 6 months of hire., • Continually required to stand. 8-9 hours daily, • Continually required to walk. 8-9 hours daily, • Frequently required to sit. 2-3 hours daily, • Continually required to utilize hand and finger dexterity. 8-9 hours daily, • Continually required to talk or hear over environmental and equipment noise. 8-9 hours daily, • Continually utilize visual acuity to operate equipment, read technical information, and/or use a keyboard. 8-9 hours daily, • Frequently required to lift/push/carry items no less than 50 pounds. See your impact. How many people can drive by a highway, school, or major company and say, “I helped build that?” At Alta, every employee can. The work we do is visible in the infrastructure communities rely on every day. We’re passionate about developing people. Many of our leaders began their journey in entry level positions, and worked their way up into management. We invest in you from day one with hands-on training, paid certifications, and mentorship to help you progress in your career. Working at Alta means: • Career mobility: clear paths to grow into leadership roles., • Multi-disciplinary exposure: civil, survey, geotechnical, materials testing, environmental, EHS, etc., • Investment in you: paid certifications and ongoing training., • Culture of belonging: supportive teams where your work is recognized. Impact you can see: the chance to contribute to projects that define communities. Benefits • Competitive salary and performance-based bonuses., • Comprehensive health, dental, and vision insurance., • 401(k) plan with company match., • Opportunities for professional development and career advancement., • Flexible work environment EQUAL EMPLOYMENT OPPORTUNITY POLICY STATEMENT. It is the policy of Alta E&I not to discriminate against any applicant for employment, or any employee because of age, color, sex, disability, national origin, race, religion, or veteran status.

Job DescriptionSalary: SyberJet is an up-and-coming aircraft manufacturer dedicated to pushing the boundaries of innovation and precision in the design and manufacturing of advanced aerospace systems and aircraft. Our team is committed to excellence, creativity, and continuous improvement in all aspects of our work. Job Description We are seeking an experienced Materials & Process, Materials Science Engineer to support sustaining efforts and updates for Legacy programs, and related activities for future projects, including our new cabin interior program. A successful candidate will have extensive expertise in aerospace materials, manufacturing processes, regulatory compliance, and certification processes to ensure all materials meet stringent safety, performance, and regulatory requirements common to high performance jet powered aircraft. Key Responsibilities • Assess current airframe materials for obsolescence, cost reduction opportunities, and performance improvements., • Conduct comparative analysis of existing vs. alternative manufacturing processes. Assess impact on critical performance parameters such as strength, durability, fatigue life, etc., • Risk assessments and mitigation strategies., • Develop and/or maintain manufacturing and engineering processes such as machining, forming, welding, heat treatment, chemical milling, and composite fabrication., • Create and/or maintain detailed process specifications, work instructions, and quality control procedures to ensure consistent production., • Investigate material failures and quality issues using root cause analysis methodologies. Implement corrective and preventive actions to improve product and process reliability., • Collaborate with design engineering teams to ensure the integrity and manufacturability of designs while optimizing material usage, weight and production costs., • Provide materials expertise during design reviews and support design changes to improve manufacturing efficiency., • Maintain comprehensive documentation for materials specifications, testing, process controls to support FAA certification efforts., • Maintain current knowledge of evolving regulations and industry standards affecting aircraft materials., • Manage materials databases and FEA packages for material analysis and statistical analysis., • Drive lean manufacturing principles and cost reduction methodologies. Qualifications • Education: Bachelors or Masters degree in Mechanical Engineering, Materials Science and Engineering, Aerospace Engineering, or a related field., • Experience:, • Minimum of 7 years of experience in the aerospace industry., • Knowledge of material properties and testing methodologies for aerospace materials including metallic alloys, composites, polymers, coatings., • Experience with corrosion testing and evaluation such as stress corrosion, galvanic compatibility, intergranular, etc., • Experience with corrosion prevention methods., • Experience performing environmental testing such as UV exposure, thermal cycling, humidity resistance, and chemical compatibility., • Experience supporting or leading design allowables projects., • Demonstrate strong interpersonal skills with ability to support multiple projects simultaneously, while providing stakeholders with essential expertise and risk information., • Previous experience working with FAA DERs and certification authorities., • Preferred Experience:, • Broad exposure to aircraft development such as primary structure, systems, interiors, etc. related to high performance jet powered aircraft., • Additive manufacturing experience., • Experience with CATIA V5, Siemens NX, Teamcenter PLM., • Experience with agile development sprints (Jira) and project documentation in Confluence., • Analytical Skills: Excellent problem-solving skills with the ability to analyze complex technical data and provide effective solutions., • Communication: Strong verbal and written communication skills, with the ability to effectively present and document technical information to various stakeholders., • Team Player: Ability to work collaboratively in a team environment, demonstrating strong interpersonal skills. Preferred Qualifications • Knowledge of honeycomb sandwich panel construction methods and best practices., • Knowledge of honeycomb panel joining methods such as bonded joints, panel pins, inserts, etc., • Strong understanding of mechanical fastening principles and best practices in an aerospace/aviation setting., • Strong understanding of manufacturing processes and principles in an aerospace/aviation setting., • Experience using testing equipment such as load frames, burn cabinets, environmental chambers, etc. What We Offer • Competitive salary and benefits package., • Opportunities for professional growth and development., • A collaborative and innovative work environment., • The chance to work on cutting-edge aerospace projects with a talented team of professionals. How to Apply Interested candidates are encouraged to submit their resume, cover letter, and a portfolio of relevant work to . Please include Materials & Process, Material Sciences Engineering Aerospace in the subject line of your email.

Job Description We are seeking a Project Manager to join our team! Candidate must be dependable, enthusiastic, detail-oriented and able to multi-task while working. Assignments will include management of construction materials testing services for public and commercial projects. Construction materials testing project duties will include management, coordination, supervision, review and direction of technician staff for earthwork, foundation, concrete, masonry, steel, EIFS, fireproofing and pavement construction testing. Meet with clients and attend site meeting as necessary. Responsibilities: • Manage all aspects of small to medium sized projects., • Allocate resources for assigned projects., • Take action to resolve operational problems and minimize delays., • Conduct meetings and prepare reports to communicate the status for the project., • Interface with project inspectors, contractors, architects, engineers, city and county officials, and clients, • Bachelor's degree in Engineering, Environmental Science or Geology and a minimum of 5 years' related experience. Or in lieu of a degree, a minimum of 10 years' related experience in testing and quality control fields., • Excellent written, verbal and interpersonal communications skills., • Project Management Professional (PMP), • Engineer (EIT), Geologist (GIT) Company DescriptionACS Services, LLC is a multidisciplinary service company providing Geotechnical Engineering and Design, QC/QA materials testing services in the Field and Lab, Special Inspections, Environmental, and Drilling Services to the construction industry in the Southwest.ACS Services, LLC is a multidisciplinary service company providing Geotechnical Engineering and Design, QC/QA materials testing services in the Field and Lab, Special Inspections, Environmental, and Drilling Services to the construction industry in the Southwest.

Job Description Job Title: Test Engineer Duration: 06 Months Contract Location: West Guadalupe Rd. Gilbert Arizona 85233 (Onsite) JOB DESCRIPTION This will be part of the 9/80 schedule Will be 100% onsite Pay rate offer will be determined based off level of experience. Here’s what to expect on a day-to-day basis: · Responsible for completing tasks related to the design and manufacture of Electrical Ground Support Equipment (EGSE) for products. This includes the development of EGSE test systems includes software, and documentation. · Working with other disciplines and within the test team to ensure program schedules and requirements are met. Test Software: · Create National Instruments LabVIEW VIs for COTS instrument control and monitoring, and User Interface (UI) for UUT command and telemetry. · Development of Python scripts to control execution of VxWorks and LabVIEW code for test automation. · Knowledge of VxWorks test code is desirable for integration with the C code on the SBC. · Familiarity with VHDL is also desirable for FPGA programming and integration. Documentation: · Test engineers are responsible for the creation and maintenance of assembly, schematic, and parts lists for custom test equipment through the document control system. Microsoft Visio, Microsoft Excel, and Intercept Mozaix are used for design documentation. · Test engineers are also responsible for the formal documentation of Integration and Test Plans, Environmental Test Plans and Acceptance Test Procedures (customer deliverables) used to document compliance with all customer and design requirements. At a minimum you'll need to meet these qualifications: · A minimum of a BS in Electrical Engineering, Computer Science, or related STEM degree and 3+ years of position related experience. · A candidate must be knowledgeable in software development using any of C, LabVIEW, or Python programming languages. · Knowledgeable using Windows applications such as Visio, Word and other Microsoft Office tools. · Knowledge of hardware test principals and preferably test experience for spacecraft components. · Self-motivated and willing to take ownership of assignments and look for ways to execute on time. Willing to assist other engineers in Hardware or Software Development, Debug, and Execution. Company DescriptionPrimus Software Corporation. Primus Software Corporation is a global staff augmentation firm providing a wide-range of talent on-demand and total workforce solutions. We have excellent domain expertise in all verticals. We provide long term solutions with quality as our main focus. To learn more about Primus Software Corporation, please visit our website . I recently came across your resume on job boards, and I wanted to reach out to you regarding an exciting job opportunity that I believe aligns perfectly with your skills and experience.Primus Software Corporation. Primus Software Corporation is a global staff augmentation firm providing a wide-range of talent on-demand and total workforce solutions. We have excellent domain expertise in all verticals. We provide long term solutions with quality as our main focus. To learn more about Primus Software Corporation, please visit our website . I recently came across your resume on job boards, and I wanted to reach out to you regarding an exciting job opportunity that I believe aligns perfectly with your skills and experience.

Job DescriptionDescriptionWilson Engineers is an Arizona-based firm with a staff of more than 200 personnel specializing in water and wastewater engineering and construction management services. We are dedicated to delivering ethical, reliable, high-quality services to our clients based on innovation, while sustaining a challenging and rewarding work environment for our greatest assets, our employees. We are seeking a Water/Wastewater EIT / Entry-Level Design Engineer to join our team. This position requires 40 hours per week in our Tempe office. (This job is not remote nor hybrid.) We anticipate this position starting as soon as possible. This position is targeted for applicants who will graduate in December 2025. Essential Duties and Responsibilities • Maintains and documents communication with clients through letters and telephone throughout the development and completion of a project., • Monitors team members’ progress and advises team members of schedules and deadlines., • Reviews schedules and budgets relative to project progress and completion., • Conducts project status review checking accuracy of work completed and monitors timeliness of project completion., • Attends meetings on project management., • Assists Project Managers with any administrative duties concerning the completion of the assigned project., • Maintains project file., • Assists Project Manager in preparation of engineering studies and reports., • Provide technical guidance and training to members of the project team., • Provide project design using sound engineering principles, engineering software, and AutoCADD., • Assists in the preparation of contract documents and technical specifications., • Assists Project Manager in assuring quality control procedures are performed., • Assist in the preparation of project drawings., • Performs necessary code research., • Responsible for the accuracy of each segment of the work and the final check of the work., • Responsible for adherence to all applicable codes., • Must be scheduled to graduate in December 2025 with a Bachelor of Science degree in Civil Engineering, Environmental Engineering, or Chemical Engineering (degrees in other fields WILL NOT be considered); OR scheduled to graduate in December 2025 with a Masters degree in Civil, Environmental or Chemical Engineering is a plus, but not required (again, degrees in any other field WILL NOT be considered), • Possess a strong desire for a career working in the Water and Wastewater field (including the design of treatment facilities, collection systems, booster and pump stations, water, reclaimed water, and wastewater master plans)., • Computer experience with Microsoft Word, Excel, and Outlook, • Excellent verbal, written, and interpersonal skills, • Strong sense of urgency and self-initiative to meet client deadlines, • Detail-oriented team player with the ability to contribute to a positive work environment, • Valid driver’s license with approved/acceptable driving history, • Medical Plan, • Vision Plan, • Dental Plan, • Group Life Insurance, • Short Term Disability, • Long Term Disability, • Voluntary Term Life Insurance, • Liberty Mutual Insurance, • Personal Time Off (PTO), • Paid Holidays, • 401(K) Retirement Plan, • Section 125 Flexible Benefits Plan, • Tuition Reimbursement, • Employee Referral Bonus#LI-DH1

Job DescriptionDescriptionWilson Engineers is an Arizona-based firm with a staff of more than 200 personnel specializing in water and wastewater engineering and construction management services. We are dedicated to delivering ethical, reliable, high-quality services to our clients based on innovation, while sustaining a challenging and rewarding work environment for our greatest assets, our employees. We are seeking a Water/Wastewater EIT / Entry-Level Design Engineer to join our team. This position requires 40 hours per week in our Tempe office. (This job is not remote nor hybrid.) We anticipate this position starting as soon as possible. This position is targeted for applicants who have already graduated. Essential Duties and Responsibilities • Maintains and documents communication with clients through letters and telephone throughout the development and completion of a project., • Monitors team members’ progress and advises team members of schedules and deadlines., • Reviews schedules and budgets relative to project progress and completion., • Conducts project status review checking accuracy of work completed and monitors timeliness of project completion., • Attends meetings on project management., • Assists Project Managers with any administrative duties concerning the completion of the assigned project., • Maintains project file., • Assists Project Manager in preparation of engineering studies and reports., • Provide technical guidance and training to members of the project team., • Provide project design using sound engineering principles, engineering software, and AutoCADD., • Assists in the preparation of contract documents and technical specifications., • Assists Project Manager in assuring quality control procedures are performed., • Assist in the preparation of project drawings., • Performs necessary code research., • Responsible for the accuracy of each segment of the work and the final check of the work., • Responsible for adherence to all applicable codes., • Must possess a Bachelor of Science degree in Civil Engineering, Environmental Engineering, or Chemical Engineering (degrees in other fields WILL NOT be considered); Masters degree in Civil, Environmental or Chemical Engineering is a plus, but not required (again, degrees in any other field WILL NOT be considered), • Possess a strong desire for a career working in the Water and Wastewater field (including the design of treatment facilities, collection systems, booster and pump stations, water, reclaimed water, and wastewater master plans)., • Computer experience with Microsoft Word, Excel, and Outlook, • Excellent verbal, written, and interpersonal skills, • Strong sense of urgency and self-initiative to meet client deadlines, • Detail-oriented team player with the ability to contribute to a positive work environment, • Valid driver’s license with approved/acceptable driving history, • Medical Plan, • Vision Plan, • Dental Plan, • Group Life Insurance, • Short Term Disability, • Long Term Disability, • Voluntary Term Life Insurance, • Liberty Mutual Insurance, • Personal Time Off (PTO), • Paid Holidays, • 401(K) Retirement Plan, • Section 125 Flexible Benefits Plan, • Tuition Reimbursement, • Employee Referral Bonus#LI-DH1

Job DescriptionJob Summary: We are seeking a skilled and detail-oriented HVAC Engineer with experience in semiconductor or cleanroom environments to join our facilities team. The role is responsible for designing, maintaining, and optimizing HVAC systems to support semiconductor manufacturing, ensuring tight control of temperature, humidity, airflow, and air quality in critical environments. You will collaborate closely with process engineers, maintenance staff, and cleanroom personnel to ensure optimal performance and compliance with industry standards. Position will start in Tempe AZ, and will transition to Peoria AZ, within 3-6 months. Key Responsibilities: * Design and optimize HVAC systems including air handlers, chillers, boilers, and ductwork for semiconductor cleanrooms (Class 1 to Class 1000). * Ensure environmental control standards for temperature, humidity, and particle count are consistently met across manufacturing zones. * Conduct load calculations, airflow simulations, and system balancing for cleanrooms and critical equipment areas. * Support the installation and commissioning of new HVAC systems and equipment upgrades. * Troubleshoot HVAC system issues to minimize downtime and support 24/7 fab operations. * Collaborate with environmental health and safety (EHS) teams to ensure compliance with ASHRAE, ISO 14644, SEMI standards, and local building codes. * Use Building Management Systems (BMS) and other monitoring tools for performance analysis and preventive maintenance. * Participate in energy conservation efforts and sustainability initiatives. * Develop and maintain technical documentation, SOPs, and maintenance logs. Required Qualifications: * Bachelor’s degree in Mechanical Engineering, HVAC Technology, or a related field. * 3+ years of experience in HVAC engineering, preferably in a semiconductor, cleanroom, or high-tech manufacturing environment. * Strong knowledge of HVAC design principles, air filtration standards, and cleanroom protocols. * Proficient in AutoCAD, Revit, or other HVAC modeling software. * Experience with HVAC control systems, including BMS/EMS platforms (e.g., Siemens, Johnson Controls). * Excellent analytical and problem-solving skills. * Ability to work in a fast-paced, high-reliability environment. Preferred Qualifications: * Familiarity with SEMI S2, ISO 14644, and ASHRAE guidelines. * Experience working in Class 100 or cleaner environments. * LEED or other energy-efficiency certifications. Work Environment: * Primarily in a cleanroom-controlled facility and mechanical spaces. * May require use of PPE and adherence to cleanroom protocols. * Some on-call or off-hour support may be required for system emergencies or critical installations.

Job Description:\n\nDescription: Since 1980, CobbFendley has been committed to providing innovative engineering and surveying solutions with the goal of bettering communities. Our multi-discipline approach allows for the efficient completion of projects through experienced staff who focus on client communication. We are always seeking talented and qualified professionals to enhance our ability to provide clients with exceptional service. Are you ready to Join Our Block and advance your career? At CobbFendley, people are our most valued resource. We offer a(n): New Hire Program // We understand changing jobs can be intimidating, CobbFendley has established a program geared specifically to the successful onboarding and integration of new hires into the firmDevelopment Opportunities // Professional and personal growth through innovative in-house training and collaborative resources Compensation + Benefits // Competitive compensation package with comprehensive benefits including 401(k) Matching and Profit-sharing Contributions; Employee Stock Ownership Plan (ESOP); Health, Vision, and Dental Insurance; Short-Term and Long-Term Disability Insurance; Employer Funded and Voluntary Life Insurance; Tuition Reimbursement; and Continuing Education Programs Paid Parental Leave // FMLA-eligible employees will receive fully paid leave in the amounts of eight (8) weeks for maternity cases and two (2) weeks for paternity or adoptions casesWinter Holiday // Extended office closure from December 25 through January 1 to relax and enjoy the holidays Community Engagement // CobbFendley Cares focuses on STEM Education, Hunger Relief, and Sustainable Solutions CobbFendley is seeking an experienced Senior Project Manager in our Tempe, Arizona office. Requirements: EDUCATION, REGISTRATION, CERTIFICATION The successful candidate’s most important qualifications include the following.Registration and designation as a Professional Engineer (PE), required. EXPERIENCE + KNOLWEDGE SKILLS ABILITY (KSA)Expert // Deep and comprehensive knowledge with a high level of expertise; recognized authority and capable of innovating and leading in the field. 20+ years of relevant and professional experience within a discipline, including proven performance as a Project Manager IV. Knowledge of project management methodologies and lifecycle, industry standards, city, state, and federal rules and regulations, tools and software (i.e., Microsoft suite, Vantagepoint, Smartsheet, etc.), and quality management required.Skills including leadership, communication, time, risk, quality and financial management, negotiation, and problem-solving required.Ability to think strategically, adapt to competing priorities, execute and delegate, communicate and collaborate, and perform tasks with a high level of accuracy required COMPLEXITY + DECISION-MAKING AUTHORITY Responsible for success of projects of large and may be complex scope of major importance within a discipline. Independently perform all assignments, is the key decision maker/subject matter expert and addresses staff questions/concerns in project design/constructability, and supervision received is essentially administrative. RESPONSIBILITIESFinancial Management // Utilize weekly budget report, project reports, accounts receivable (A/R) report, and staff utilization to manage projects and resources. Escalate to Regional Manager for additional staffing needs. Prepare scope of work (SOW), Levels of Effort (LOE) and schedules for projects. Identify out of scope requests and prepare proposals for additional authorizations.Responsible for collection of invoices from clients and other Project Manager’s clients under their direction. Communicates with Regional Manager for delayed payment risk plans.Corporate Compliance + Risk Assessment //Ensure completion of the contract and subcontract review process through the Contracts Department and appropriate filing and adhere to jurisdictional requirements and company-established signature matrix protocol. With support and direction from Contracts Department, review and provide contract mark ups, negotiate client contract modifications, and keep informed of the 5 typical contract review modifications: indemnification (duty to defend), standard of care, insurance requirements, warranty, and payment terms.Negotiate payment terms with the client. Ensure the company-established QA/QC process is followed from proposals to final deliverables.Capable of identifying preclusions on pursuits and teaming opportunities. Communication + Collaboration //Foster an environment for strong communication and collaboration such as ensuring that messages and information are not only received but understood and acted upon appropriately within the department, other disciplines and regions, and corporate resources including engagement of staff. Able to articulate project requirements timelines, deliverables, corporate directives, in a concise and clear manner.Ensure project and company communication is provided and documented to clients and staff. Manage multiple and/or major marketing pursuits including resumes, writing project approach, responsible for teaming efforts, QA/QC and review of requests for qualifications (RFQ), proposals, leading interviews, etc. Client + Internal Satisfaction // Be responsive and accessible, anticipate needs and proactively offer solutions, address complex problems and concerns timely, and follow up to ensure satisfaction post-resolution.Oversee multiple clients and ensure a positive and professional rapport.People Development //Ensures adequate staffing and recruiting of project team members.Delegates work to, trains, mentors, and supervises junior-level staff and other entry to senior level project managers to complete assignments.Provide timely feedback directly to staff including for annual evaluation.Exhibit exceptional leadership skills, including the ability to clearly define goals and responsibilities that are clear and realistic.Business Development //Develop and maintain strong relationships with new and existing clients to identify business opportunities and expand company presence in the State of Arizona and within other states in CobbFendley’s Mountain region.Identify and pursue potential leads, assisting in the preparation of proposals and presentations to secure new projects. Collaborate with marketing and leadership teams to develop strategic plans for growth in Municipal and other infrastructure sectors in the state of Arizona.As needed, represent the company at industry events, conferences, and other networking opportunities and stay updated with market trends and competitor activities.Lead efforts in identifying and developing teaming partnerships with other firms.Drive revenue growth through proactive engagement, client retention, and strategic business initiatives.Technical //Work on projects that include the following scopes: Drainage Area MapsClosed Storm System HydraulicsRoadway design, AlignmentsSanitary Sewer Design, Force MainsWaterline DesignWater & Wastewater Design of PlantProject Manual Construction Contract & SpecsPermits & RegulatoryTechnical Report WritingSelecting PumpsLift Station DesignDevelopmental Plan ReviewConstruction Admin, Limited InspectionConstructability ReviewCoordinating Multiple Discipline DesignConstruction PhasingADA RegulationProgram ManagerCity of Engineering ServicesCapital Improvement PlansImpact FeeUtilize the following software applications to complete project work:Microsoft ProjectBluebeam COBBFENDLEY CHARACTERISTICSWe Collaborate // with a professional attitude making communication a priority.We Commit // to maintaining a safe and inclusive work environment, with a focus on accountability. We Build Communities // by fulfilling our responsibilities with integrity that is consistent with industry standards. PHYSICAL/COGNITIVE REQUIREMENTS + ENVIRONMENTAL FACTORS Most work is performed in a professional office environment. Some trips to client offices and outdoor environments for observations will be required.Seated and Standing Position. Extended periods of sitting and standing in an upright position at a workstation.Mobility. Movement within the office and job sites, including navigating between floors, workstations, and outdoor environments with potential for uneven surfaces.Neck Movement. Forward flexion, extension, or lateral rotation of the head and neck while using multiple computer screens.Repetitive Motion. Repetitive finger movements for operating a computer mouse and typing on a keyboard.Arm Movement. Extending hands and arms in various directions, such as overhead, below the waist, forward, or laterally.Object Handling. Raising or lowering objects from one level to another and transporting objects by holding them in the hands, arms, or over the shoulder.Cognitive Requirements. Selective attention, oral comprehension, oral expression, speech recognition, speech clarity, written comprehension, written expression, problem sensitivity, deductive reasoning, inductive reasoning, number facility, information ordering, category flexibility, flexibility of closure, fluency of ideas, and originality.Office Conditions. Includes extensive use of electronic devices such as computers, printers, copiers, scanners, plotters, and telephones. Additionally, tasks may involve the use of cutting tools and equipment like rotary paper cutters and plotting devices.Outdoor Conditions. Includes walking and climbing on uneven surfaces, confined spaces, and exposure to extreme weather conditions (heat and freezing temperatures). Potential exposure to high noise levels and various allergens, including poison ivy, sumac, dust, pollen, and cedar. Potential exposure to wildlife hazards such as animals, insects, and plants.Safety and Equipment Use. Regular use of personal protective equipment (PPE) is required, along with use of hand and power tools.Driving and Vehicle Use. May involve driving large pick-up trucks with attached trailers, potentially operating watercraft, and for extended periods of time. EXPECTED WORK HOURSThis is a full-time position, generally 40 hours per week, however, hours may fluctuate depending on department needs including the use of overtime. CobbFendley’s standard operating hours are Monday through Friday, 7:30 AM to 4:30 PM CST. Generally, employees receive a 1-hour unpaid lunch break free of duty. Please note, operating hours and lunch hours may differ based on project workload, primarily for field staff. WORK LOCATION FLEXIBILTY This position is eligible for a hybrid schedule once the training period is complete as established by the department. EQUAL EMPLOYMENT OPPORTUNITY Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws.EEO is the Law (English)EEO is the Law (Spanish)EEO is the Law - Poster Supplement MISCELLANEOUS Pre-Employment Screenings. All offers of employment at CobbFendley are contingent upon the prospective employee passing a drug screening, physical exam (if applicable), and various background verifications (including but not limited to 10-year history of the county, state, federal, and a 5-year history of motor vehicle records). CobbFendley complies with all applicable state and federal laws regarding said screenings. Unless and only to the extent state or federal law limits CobbFendley’s drug-testing requirements for initial hiring, all candidates for employment are subject to pre-employment drug screening verification which may include a panel drug test for use of marijuana and other substances that may be lawful under state law but unlawful under federal law. A positive result may lead to disqualification of candidacy or termination from employment to the extent permitted by law. CobbFendley reserves all rights with respect to its drug-testing, other pre-employment screenings, and workplace policies and procedures. External Recruiting Agencies. CobbFendley does not and will not accept unsolicited resumes under any circumstances from independent recruiters, recruiting agencies, or similar entities. Recruiting activity on behalf of a candidate does NOT constitute CobbFendley's acceptance of terms and conditions without prior contractual agreements signed by authorized CobbFendley personnel. Unsolicited resumes through any channels including cold calling, emails, applications, social media messaging, etc., will not be reviewed.Work Authorization + Sponsorship. Cobb, Fendley & Associates, Inc. participates in E-Verify. E-Verify is an Internet-based system operated by the Department of Homeland Security (DHS) in partnership with the Social Security Administration (SSA). The E-Verify system uses federal databases to rapidly validate individual identities and work eligibility from the information gathered in the Form I-9. CobbFendley will not sponsor applications of work visas. We understand that this could affect your decision to apply with these conditions in mind.Applicant Accommodations. Consistent with the Americans with Disabilities Act (ADA) it is the policy of CobbFendley to provide reasonable accommodation when requested by a qualified applicant or candidate with a disability, unless such accommodation would cause an undue hardship for the Company. The policy regarding requests for reasonable accommodation applies to all aspects of the hiring process. If reasonable accommodation is needed, please contact the HR Department at 713.462.3242 or . Drug-Free Workplace Conditions Medication Disclosure: Employees and job applicants shall receive notice of the most common medications, either by brand name, common name, or chemical name, that may alter or affect a drug test. A list of such medications shall be developed by the Agency for Health Care Administration. Contesting Positive Results: An employee or job applicant who receives a positive confirmed drug test result may contest or explain the result to the employer within 14 days after written notification of the positive test result. Responsibility to Notify the Laboratory: The employee or job applicant has the responsibility to notify the testing laboratory of any administrative or civil actions brought pursuant to this section. List of Drugs for Testing: A list of all drugs for which the employer will test can be supplied upon request, described by brand names or common names, as applicable, as well as by chemical names. Right to Consult the Testing Laboratory: Employees and job applicants are notified of their right to consult the testing laboratory for technical information regarding prescription and nonprescription medication.

Job DescriptionDescription: Since 1980, CobbFendley has been committed to providing innovative engineering and surveying solutions with the goal of bettering communities. Our multi-discipline approach allows for the efficient completion of projects through experienced staff who focus on client communication. We are always seeking talented and qualified professionals to enhance our ability to provide clients with exceptional service. Are you ready to Join Our Block and advance your career? At CobbFendley, people are our most valued resource. We offer a(n): • New Hire Program // We understand changing jobs can be intimidating, CobbFendley has established a program geared specifically to the successful onboarding and integration of new hires into the firm, • Development Opportunities // Professional and personal growth through innovative in-house training and collaborative resources, • Compensation + Benefits // Competitive compensation package with comprehensive benefits including 401(k) Matching and Profit-sharing Contributions; Employee Stock Ownership Plan (ESOP); Health, Vision, and Dental Insurance; Short-Term and Long-Term Disability Insurance; Employer Funded and Voluntary Life Insurance; Tuition Reimbursement; and Continuing Education Programs, • Paid Parental Leave // FMLA-eligible employees will receive fully paid leave in the amounts of eight (8) weeks for maternity cases and two (2) weeks for paternity or adoptions cases, • Winter Holiday // Extended office closure from December 25 through January 1 to relax and enjoy the holidays Novice // Basic understanding and minimal practical experience; requires guidance and supervision. No experience is required, internship experience and EIT preferred. • Knowledge of standard engineering and scientific techniques, procedures, and criteria in carrying out tasks., • Skills including use of industry-standard computer software for the position (i.e., software such as CADD, HCS, AutoCAD, MicroStation, GIS, and Hydrologic/Hydraulic models)., • Design + Analysis //, • Complete simple application of design and analysis using determined software and criteria, under the direction of a Professional Engineer., • Exercise limited judgment on details of work including preliminary selections and adaptations of engineering alternatives., • Compliance + Quality //, • Utilize Company resources to begin understanding QA/QC processes and procedures., • Communication + Collaboration //, • Work with supervisor, project manager, mentors, and various internal personnel to complete assignments within discipline., • Training, Learning + Advancement //, • Utilize formal education including fundamentals of engineering and apply it in assignments., • Client + Internal Satisfaction //, • Work with internal clients daily and escalate concerns when needed., • Technical //, • Apply technical expertise and be able to work with a project team on conventional and unconventional projects, • Perform independent research and adapt to changing priorities, • Work in a collaborative team environment and perform self QA/QC of work, • Adhere to CobbFendley’s safety standards to uphold a safe and efficient environment, • Maintain a professional attitude and fulfill responsibilities with integrity, • Learn and maintain knowledge of client standards, rules, and requirements for planning, construction, and documentation, • Support CobbFendley Project Managers and Engineers with engineering design or coordination tasks for various projects, • Work towards obtaining EIT and PE licensure within 6 months to meet performance requirements., • Desired Experience – any combination of the following, • Utility design and relocation for all underground utilities including:, • Potable water, • Reclaimed water, • Sanitary sewer, • Storm drain, • Natural gas distribution, • Telecommunications, • Fiber optic cable, • Site Development, • Residential subdivisions, • Commercial buildings, • Public facilities such as schools, fire houses or similar, • Hydrology and Hydraulics, • Drainage studies and master plans, • Open channel design, • Storm water quality analysis Most work is performed in a professional office environment. Some trips to client offices and outdoor environments for observations will be required. • Seated and Standing Position. Extended periods of sitting and standing in an upright position at a workstation., • Mobility. Movement within the office and job sites, including navigating between floors, workstations, and outdoor environments with potential for uneven surfaces., • Neck Movement. Forward flexion, extension, or lateral rotation of the head and neck while using multiple computer screens., • Repetitive Motion. Repetitive finger movements for operating a computer mouse and typing on a keyboard., • Arm Movement. Extending hands and arms in various directions, such as overhead, below the waist, forward, or laterally., • Object Handling. Raising or lowering objects from one level to another and transporting objects by holding them in the hands, arms, or over the shoulder., • Cognitive Requirements. Selective attention, oral comprehension, oral expression, speech recognition, speech clarity, written comprehension, written expression, problem sensitivity, deductive reasoning, inductive reasoning, number facility, information ordering, category flexibility, flexibility of closure, fluency of ideas, and originality., • Office Conditions. Includes extensive use of electronic devices such as computers, printers, copiers, scanners, plotters, and telephones. Additionally, tasks may involve the use of cutting tools and equipment like rotary paper cutters and plotting devices., • Outdoor Conditions. Includes walking and climbing on uneven surfaces, confined spaces, and exposure to extreme weather conditions (heat and freezing temperatures). Potential exposure to high noise levels and various allergens, including poison ivy, sumac, dust, pollen, and cedar. Potential exposure to wildlife hazards such as animals, insects, and plants., • Safety and Equipment Use. Regular use of personal protective equipment (PPE) is required, along with use of hand and power tools., • This is a full-time position, generally 40 hours per week, however, hours may fluctuate depending on department needs including the use of overtime., • This position is eligible for a hybrid schedule once the training period is complete as established by the department. EQUAL EMPLOYMENT OPPORTUNITY Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws. • EEO is the Law (English), • EEO is the Law (Spanish), • Pre-Employment Screenings. All offers of employment at CobbFendley are contingent upon the prospective employee passing a drug screening, physical exam (if applicable), and various background verifications (including but not limited to 10-year history of the county, state, federal, and a 5-year history of motor vehicle records). CobbFendley complies with all applicable state and federal laws regarding said screenings. Unless and only to the extent state or federal law limits CobbFendley’s drug-testing requirements for initial hiring, all candidates for employment are subject to pre-employment drug screening verification which may include a panel drug test for use of marijuana and other substances that may be lawful under state law but unlawful under federal law. A positive result may lead to disqualification of candidacy or termination from employment to the extent permitted by law. CobbFendley reserves all rights with respect to its drug-testing, other pre-employment screenings, and workplace policies and procedures., • External Recruiting Agencies. CobbFendley does not and will not accept unsolicited resumes under any circumstances from independent recruiters, recruiting agencies, or similar entities. Recruiting activity on behalf of a candidate does NOT constitute CobbFendley's acceptance of terms and conditions without prior contractual agreements signed by authorized CobbFendley personnel. Unsolicited resumes through any channels including cold calling, emails, applications, social media messaging, etc., will not be reviewed., • Work Authorization + Sponsorship. Cobb, Fendley & Associates, Inc. participates in E-Verify. E-Verify is an Internet-based system operated by the Department of Homeland Security (DHS) in partnership with the Social Security Administration (SSA). The E-Verify system uses federal databases to rapidly validate individual identities and work eligibility from the information gathered in the Form I-9. CobbFendley will not sponsor applications of work visas. We understand that this could affect your decision to apply with these conditions in mind. Medication Disclosure: Employees and job applicants shall receive notice of the most common medications, either by brand name, common name, or chemical name, that may alter or affect a drug test. A list of such medications shall be developed by the Agency for Health Care Administration. Contesting Positive Results: An employee or job applicant who receives a positive confirmed drug test result may contest or explain the result to the employer within 14 days after written notification of the positive test result. Responsibility to Notify the Laboratory: The employee or job applicant has the responsibility to notify the testing laboratory of any administrative or civil actions brought pursuant to this section. List of Drugs for Testing: A list of all drugs for which the employer will test can be supplied upon request, described by brand names or common names, as applicable, as well as by chemical names. Right to Consult the Testing Laboratory: Employees and job applicants are notified of their right to consult the testing laboratory for technical information regarding prescription and nonprescription medication.

Job Description Hazen and Sawyer is seeking a Sr. Project Engineer/Manager, Drinking water for our Arizona offices located in Tempe, Tucson, and Goodyear. This role will involve project engineering and management, and the development of drinking water projects throughout Arizona, the Southwest and across the country. You will be a part of the Hazen drinking water practice groups engaging and collaborating drinking projects, and opportunities across the country. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • Your role will include project management, design, planning, operational support, and business development with a focus on drinking water projects, • Supporting and developing proposal development., • Helping to identify, hire, supervise and mentor junior drinking water staff., • Direct coordination and collaboration with clients., • Coordination with internal technical specialists in all practice areas and discipline design professionals for project delivery., • Managing projects to meet client expectations, budgets, and quality requirements., • Following internal Hazen processes to ensure quality delivery of engineering projects for clients., • Technical responsibility for interpreting, organizing, executing, and coordinating assignments on small/medium/large projects., • Performing planning, studies, design, and support of projects through design, construction, and operation., • Bachelor's degree in civil/environmental engineering, • PE license, • 12+ years of experience in municipal water treatment, reuse, water quality, water treatment technology, or manufacturing, • Experience in successfully delivering projects spanning multiple years in collaborative, multi-disciplinary teams, • Proficient in all MS Office based computer software, • Excellent communication and interpersonal skills, and capable of interacting effectively with staff, clients, and regulatory agencies, • Self-starter with attention to detail, • Strong organizational skills, • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job DescriptionSalary: Reports To: Director/Department Manager Status: Full-time, Exempt Primary Areas of Focus • Project Management, • Project Planning, • Mentoring & Coaching, • Hiring & Training, • Project Tracking & Evaluation, • Manage multiple project teams in all aspects of project management and planning to achieve project goals and objectives., • Provide a big-picture perspective to project managers to attain project goals and strategic business objectives., • Work with project managers and stakeholders to set project goalsand objectives, identify necessary resources, estimate project budgets, set project scopes, and schedules, and create project plans., • Set and continually manage project expectations while delegating and managing deliverables with project managers., • Monitor, track, and control outcomes, facilitating project team meetings to ensure performance and progress and resolve issues or conflicts., • Provide status reporting regarding project milestones, deliverables, dependencies, risks and issues, and communication across departments and leadership., • Follow up with clients as needed to clarify project goals, ensure the design meets their needs and specifications, and represent the client in public meetings., • Assess the project's overall success and team performance., • Provide clear direction on tasks and expectations on deliverables and establish clear deadlines with team member affirmation., • Responsible for contract management, including change orders or additional services., • Own project financials, including billing, budgets, and accounts receivable collections., • Manage ongoing quality control and participate in quality issue resolution. Ensure projects are delivered to QA/QC standards., • Assist in dispute, negotiation, arbitration, or litigation, as needed., • Build and train project teams to expand their capabilities by establishing best practices, policies, tools, methodologies, quality assurance and control, tools, and templates., • Balance staffing and workload through collaboration with the PM and team., • Advocate for learning, process improvement, and project management in the company., • Collaborate with People Operations to develop onboarding processes and other essential training needs., • Coach, mentor, motivate, and supervise project managers, including performance reviews., • Provide on-site and/or remote leadership for the project team by building and motivating team members to meet project goals and adhere to their responsibilities and project milestones., • Advocate and model I am EPS culture and instill firm, department and team culture and values., • Responsible for completing personal timecards accurately and reviewing and approving associate timecards on time., • May require attending project team and public meetings after hours., • Communicate effectively (written and verbal) internally (interdepartmental and intradepartmental) and externally (inclusive of clients, sub-consultants, municipalities)., • Lead the execution of strategic initiatives., • Evaluate company practices and processes to provide input for continuous improvement., • Be an ambassador for EPS at industry events and conferences. May require attending project team and public meetings after hours., • Actively involved in developing future business and building relationships with existing clients., • Perform other duties as assigned., • Achieve a 50-60% Billable Utilization Rate. Non-billable activities include company & team meetings, professional development, community involvement, innovation time, culture & engagement activities, learning, and training., • Bachelor's degree in Civil, Environmental, or related Engineering field., • Professional Engineer License., • Minimum of 15 years experience in managing public work projects on schedule and within budget., • Proficient knowledge of Microsoft Office., • Professional knowledge of Civil 3D, Bluebeam, and Pipe Networks., • Strong leadership, diplomatic and motivational skills, including leading up, across, and down the organization with various team sizes internally and externally., • Proven ability to work creatively and analytically in a problem-solving environment demonstrating teamwork, innovation, and excellence., • Proven ability to work in an ambiguous environment and collaborate across multiple areas to achieve a common business objective., • Extensive understanding of project and program management principles, methods, and techniques., • Build and maintain relationships by engaging business leaders to establish credibility, solve problems, build consensus, and achieve objectives., • Demonstrate decisiveness in resolving business problems, making decisions, and identifying priorities., • Interpersonal skills to influence and spur change, facilitate, and enhance performance within a cross-functional environment., • Required to stand, walk, and sit., • The position may require a visit to project sites occasionally., • The position requires a normal range of hearing., • The employee must be able to lift 40 lbs. occasionally., • Requires prolonged sitting with 15% of the time spent bending and reaching., • Must have manual dexterity sufficient to operate a computer keyboard and calculator., • Health, life, 401(k), dental and vision insurance, • Short-term, long-term disability insurance and leave, • Paid holidays, • Paid Time Off, • Bereavement leave

Job DescriptionDescriptionWilson Engineers is an Arizona-based firm with a staff of more than 200 personnel specializing in water and wastewater engineering and construction management. We are dedicated to delivering ethical, reliable, high quality services to our clients based on innovation, while sustaining a challenging and rewarding work environment for our greatest assets, our employees. We are seeking an experienced, Water/Wastewater Engineer - GIS and Hydraulic Modeling to join our team. This position requires 40 hours per week in our Tempe office. (This job is not remote or hybrid.) Relocation assistance available! Essential Duties and Responsibilities • The ideal candidate will have previous experience with water and/or wastewater system hydraulic modeling and planning efforts and have a strong interest in specializing in water and wastewater hydraulic modeling and system planning studies., • Requires a Bachelor of Science in Civil Engineering or Environmental Engineering with an emphasis in Fluid Mechanics, Hydraulics, and/or Water Resources., • Must possess at least 3 years of relevant experience in Water Distribution System Modeling, Wastewater Collection System Modeling, Master Planning, and preparation of reports., • Experience and/or familiarity with Geographic Information System (GIS) technology and GIS software (i.e. ESRI ArcGIS), • Must be proficient in Microsoft Word, Excel, and PowerPoint., • Medical Plan, • Vision Plan, • Dental Plan, • Group Life Insurance, • Short Term Disability, • Long Term Disability, • Voluntary Term Life Insurance, • Liberty Mutual Insurance, • Personal Time Off (PTO), • Paid Holidays, • 401(K) Retirement Plan, • Section 125 Flexible Benefits Plan, • Tuition Reimbursement, • Employee Referral Bonus, • Relocation assistance available!LI-DH1