Trabajos environmental protection en Buffalo, New YorkCrear alertas

Job DescriptionCompany Description With more than 100 years of experience, Sika is a worldwide innovation and sustainability leader in the development and production of systems and products for commercial and residential construction, as well as the transportation, marine, automotive, and renewable energy manufacturing industries. Sika is a specialty chemicals company with a globally leading position in the development and production of systems and products for bonding, sealing, damping, reinforcing, and protection in the building sector and industry. Sika has subsidiaries in 103 countries around the world, produces in over 400 factories, and develops innovative technologies for customers worldwide. In doing so, it plays a crucial role in enabling the transformation of the construction and transportation industries toward greater environmental compatibility. Approximately 33,000 employees generated CHF 11.20 billion in sales in 2025. Job Description Watson Bowman Acme, a Sika company, is a manufacturer and supplier of expansion joint solutions for the transportation sector, including bridge and highway fabrication, preservation, and tunnels. This position is responsible for assisting Welding Fitters, Master Fitters, Forepersons, and Manufacturing Supervision staff as directed in the manufacture and assembly of metallic products supplied to the construction industry. More specifically, assist in fitting sub-assemblies as instructed, including but not limited to, tie downs, straightening, grinding, and stud welding on strip seal steel rails, using hand tools, overhead cranes, and welding equipment. Attention to safety and quality is essential to this position. Salary Range: $24 - $27 an hour based on education, experience, and qualifications of the applicant. This is a night shift position; 4-10 hour shifts Monday-Thursday. Work hours are typically 5:30pm - 4:00am. Qualifications • High school diploma or equivalency required, additional course work with emphasis on welding preferred., • Ability to read and understand shop drawings and other written instructions., • Use of hand tools and basic TIG and GMAW welding., • Comply with all safety regulations, including Safe Work Permits, training requirements, and use of safety equipment., • Must be able to lift and manage material of up to 50 pounds unassisted; walk or stand for long periods of time; bend, stoop, or kneel if required; wear all required PPE., • Possess the legal right to work and remain in the United States without sponsorship. Additional Information • 401k with Generous Company Match, • Bonuses, • Medical, Dental, and Vision Benefits, • Paid Parental Leave, • Life Insurance, • Disability Insurance, • Paid time off, paid holidays, • Floating holidays + Paid Volunteer Time, • Wellness/Fitness Reimbursements, • Education Assistance, • Professional Development Opportunities We offer competitive salaries, aligned with local market benchmarks and the specific scope and responsibilities of each role. Compensation is determined based skills relevant to the position, education and/or training. We are committed to fair and equitable pay practices in accordance with applicable laws and regulations.

At Caplugs, we work to identify and develop talent, continuously focusing on innovation, learning and improvement to deliver on our promise to be the product protection partner our customers need to solve their challenges. Are you ready to be a part of our team? Candidate must ALREADY live in the Buffalo, NY area. SPONSORSHIP NOT AVAILABLE SUMMARY: Directs the manufacturing processes in the plant and the office. Plans the layout of all the departments within the organization to provide maximum possible efficiency. Responsible for the improvement of applications and other related technical support by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES: Other duties may be assigned. • Investigates trends in technology and keeps facility up to date with new technology., • Performs layout drafting on AutoCAD., • Develops, evaluates, and improves manufacturing methods and layouts., • Analyzes and plans work force utilization, space requirements, and workflow, and designs layout of equipment and workspace for maximum efficiency., • Confers with planning and design staff concerning product design and tooling to ensure efficient production methods., • Monitors the efficient functioning of production processes., • Responsible for equipment maintenance., • Develops and submits proposals for management approval., • Estimates production times, staffing requirements, and related costs to provide information for management decisions., • Performs engineering projects and plant engineering responsibilities as required., • Coordinates construction on equipment installation activities., • Devises and adapts tools, work techniques and plant or manufacturing procedures., • Occasionally covers Maintenance Lead Position, including overseeing & directing maintenance staff & monitoring maintenance WO system., • Confers with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes., • Position takes work direction from Facility Manager, Production Manager, production supervision from molding, VDM, Extrusion, & Secondary Operations., • Responsible for complying with the company’s Environmental Policy Manual, applicable work instructions and reporting any environmental nonconformance and/or potential nonconformance to supervision or management., • Orders spare parts (researches/determines parts & suppliers as necessary)., • May assist in company’s water treatment program (if so special training maybe required)., • Troubleshoots and repairs production equipment as required. EDUCATION and/or EXPERIENCE: Bachelor's degree (B. A.) from four‑year college or university; or two to five years related experience and/or training; or equivalent combination of education and experience.

As a Senior Piping Designer with Middough, you will create and establish complex designs consistent with good practices, client requirements and conformance to Codes & Standards. In this role, you will also apply standard drafting techniques to generate and interpret drawings in support of assigned projects and provide guidance and leadership to drafters and designers to ensure that all established Company design standards and practices are followed. Responsibilities include, but are not limited to, the following: • Work with discipline leads to establish budgets for tasks and deliverables and make sure they are distributed and maintained., • Coordinate work of other lead designers assigned to the task., • CAD Design of basic equipment layouts, piping routings that are consistent with codes, standards, and client requirements., • Ensure that discipline leads have the correct project standards and checklists. Maintain and update the overall 3D model as required., • Participate in meetings with clients as requested by Project Manager., • Adhere to all QA / QC standards., • Associates Degree in drafting or design with 10+ years of relevant experience., • Hands-on experience in developing equipment, overall facility layouts, preparation of overall 3D piping model, preparation of orthographic drawings, isometrics, bill of materials, and selection and design of piping supports., • Strong understanding of piping systems for industrial systems., • Hands-on experience with 3D design products like CADWorx, Plant 3D or Autoplant., • Experience in designs of industrial facilities, natural gas treatment, oil and gas or power industries, • Working knowledge of Earned Value for project performance monitoring., • Working knowledge of Microsoft Office products., • Ability to multi-task and be highly organized for effective project planning., • Excellent attention to detail and written communication skills., • Remain in a stationary position, often standing or sitting for prolonged periods., • Frequently walk, reach with hands and arms, climb stairs, balance, stoop or kneel, bend/twist, use repeating motions that may include the wrists/hands/fingers and talk and hear., • Frequently use up-close vision, distance vision, depth perceptions, and the ability to adjust focus., • Should not expect adverse environmental conditions within company offices., • May be exposed to adverse environmental conditions (such as climbing ladders and/or stairs, extreme heat and/or cold, and/or poor air quality) if or when on-site at a client facility. Noise levels may be moderate to high at various client sites, hearing protection may be required and/or provided. Safety protections provided by the client and/or company are required to be used and followed., • May require occasional car or air travel to other company locations or client sites. What Middough Offers We offer a growth and learning culture which encourages and supports employee development through a wide variety of tools and resources such as the company Learning Management System, Middough Learning Center. Middough provides an opportunity to bring your talents and expertise to a successful and growing organization for your career advancement goals. Additionally, we offer a highly competitive compensation and the following comprehensive benefits package, based on eligibility and plan terms/changes: • A hybrid work model for work-life flexibility (based on business and client needs), • Medical, Dental, and Vision coverage, • Company paid Short/Long Term Disability, Life, AD&D, and Travel Insurance, • Health Saving and Flexible Spending Accounts, • 401(k) Plan, • Paid Time Off, Company Paid Holidays, • Tuition Assistance, • Paid Certifications and Registrations (as applicable), • Employee Assistance Program Middough participates in the Department of Homeland Security (DHS) and Social Security Administration (SSA) E-Verify program to confirm work authorization. Equal Opportunity Employment We are an equal opportunity employer and value diversity at our company. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, sex, gender identity, sexual orientation, pregnancy, status as a parent, national origin, age, disability (physical or mental), family medical history or genetic information, political affiliation, military service, or other non-merit based factors or any other protected characteristic under protected by federal, state, or local laws. Middough does not support sponsorship for any applicant that requires an employment visa (i.e., H-1B) to work lawfully in the US.

As a Senior Electrical Engineer with Middough, you will perform engineering design within industrial power systems to include focus on AC power systems from 120V-15kV as well as PLC control systems with review/approval by a senior engineer. Responsibilities include, but are not limited to, the following: • Collect and prepare data/information and perform detailed engineering calculations (short circuit, voltage drop, cable/conduit/cable tray sizing, arc flash, lighting, heat trace, etc.)., • Design detailed drawing packages including electrical one-line diagrams, installation details, bills of material, panel schedules, lighting plans, motor schematics, conduit/cable plans, field wiring diagrams, etc., • Create specifications for various electrical equipment such as transformers, switchgear, motor control centers, etc., • Complete designs using the National Electric Code and other applicable standards., • Work with and provide direction to electrical designers., • Engineering Technology degree or Bachelor of Science in Electrical Engineering required with a focus in power systems., • 10+ years of Electrical Engineering experience., • PE license preferred., • Working knowledge of Microsoft Office products., • Strong analytical, problem-solving, and attention to detail abilities., • Strong organization and multitasking skills., • Remain in a stationary position, often standing or sitting for prolonged periods., • Frequently walk, reach with hands and arms, climb stairs, balance, stoop or kneel, bend or twist, use repeating motions that may include the wrists/hands/fingers and talk and hear., • Frequently use up-close vision, distance vision, depth perceptions, and the ability to adjust focus., • Should not expect adverse environmental conditions within company offices., • May be exposed to adverse environmental conditions (such as climbing ladders and/or stairs, extreme heat and/or cold, and/or poor air quality) if or when on-site at a client facility. Noise levels may be moderate to high at various client sites, hearing protection may be required and/or provided. Safety protections provided by the client and/or company are required to be used and followed., • May require occasional car or air travel to other company locations or client sites. What Middough Offers We offer a growth and learning culture which encourages and supports employee development through a wide variety of tools and resources such as the company Learning Management System, Middough Learning Center. Middough provides an opportunity to bring your talents and expertise to a successful and growing organization for your career advancement goals. Additionally, we offer a highly competitive compensation and the following comprehensive benefits package, based on eligibility and plan terms/changes: • A hybrid work model for work-life flexibility (based on business and client needs), • Medical, Dental, and Vision coverage, • Company paid Short/Long Term Disability, Life, AD&D, and Travel insurance, • Health Saving and Flexible Spending Accounts, • 401(k) Plan, • Paid Time Off, Company Paid Holidays, • Tuition Assistance, • Paid Certifications and Registrations (as applicable) Equal Opportunity Employment We are an equal opportunity employer and value diversity at our company. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, sex, gender identity, sexual orientation, pregnancy, status as a parent, national origin, age, disability (physical or mental), family medical history or genetic information, political affiliation, military service, or other non-merit based factors or any other protected characteristic under protected by federal, state, or local laws. Middough does not support sponsorship for any applicant that requires an employment visa (i.e., H-1B) to work lawfully in the US.

As a Senior Structural Engineer with Middough, you will collect and prepare data/information and perform detailed engineering calculations. The Senior Structural Engineer will also perform basic engineering design for review and approval by senior department team members. The Senior Structural Engineer will also demonstrate technical/professional growth through active membership in professional organizations and participating in technical seminars/courses. Responsibilities include, but are not limited to, the following: • Collect and prepare data/information and perform detailed engineering calculations., • May serve as Project Lead for select single-discipline projects by estimating work hours, developing scope of work, making staffing recommendations, and checking drawings., • Assist with field work, checking installations, and problem-solving activities., • Interact and collaborate with internal departments and project teams as well as external suppliers to obtain required project information., • Manage the scope of the project work, address scope and work changes, adjust the project deliverables as necessary, and complete the project work based on the budget and scheduled time frame., • Bachelor of Science in Structural or Civil engineering required., • PE license preferred., • 10+ years of experience performing engineering analysis and design functions., • Experience in heavy industrial arenas such as Metals, Petroleum Refineries, Specialty Chemicals, Power, Food and Manufacturing Industries., • Experience with design of steel and concrete structures, STAAD structural analysis software, Revit building information modeling software, and Navisworks 3D design review software., • Knowledge of appropriate design codes (AISC, ACI, ASCE, International Building Code (IBC), OSHA etc.), • Working knowledge of Microsoft Office products., • Excellent analytical, problem-solving, and attention to detail abilities., • Excellent multitasking and organizational abilities for project efficiency., • Remain in a stationary position, often standing or sitting for prolonged periods., • Frequently walk, reach with hands and arms, climb stairs, balance, stoop or kneel, bend or twist, use repeating motions that may include the wrists/hands/fingers and talk and hear., • Frequently use up-close vision, distance vision, depth perceptions, and the ability to adjust focus., • Should not expect adverse environmental conditions within company offices., • May be exposed to adverse environmental conditions (such as climbing ladders and/or stairs, extreme heat and/or cold, and/or poor air quality) if or when on-site at a client facility. Noise levels may be moderate to high at various client sites, hearing protection may be required and/or provided. Safety protections provided by the client and/or company are required to be used and followed., • May require occasional car or air travel to other company locations or client sites. What Middough Offers We offer a growth and learning culture which encourages and supports employee development through a wide variety of tools and resources such as the company Learning Management System, Middough Learning Center. Middough provides an opportunity to bring your talents and expertise to a successful and growing organization for your career advancement goals. Additionally, we offer a highly competitive compensation and the following comprehensive benefits package, based on eligibility and plan terms/changes: • A hybrid work model for work-life flexibility (based on business and client needs), • Medical, Dental, and Vision coverage, • Company paid Short/Long Term Disability, Life, AD&D, and Travel insurance, • Health Saving and Flexible Spending Accounts, • 401(k) Plan, • Paid Time Off, Company Paid Holidays, • Tuition Assistance, • Paid Certifications and Registrations (as applicable) Equal Opportunity Employment We are an equal opportunity employer and value diversity at our company. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, sex, gender identity, sexual orientation, pregnancy, status as a parent, national origin, age, disability (physical or mental), family medical history or genetic information, political affiliation, military service, or other non-merit based factors or any other protected characteristic under protected by federal, state, or local laws. Middough does not support sponsorship for any applicant that requires an employment visa (i.e., H-1B) to work lawfully in the US.

Are you looking for a hands-on paid engineering Internship to gain knowledge, obtain experience in your field of study, have a real-life career experience, and be part of a collaborative team? Are you analytical, creative, and intuitive? Then Middough is looking for you! We offer Interns a growth and learning culture which encourages and supports employee development through a wide variety of tools and resources. Middough provides an opportunity to bring your talents to a successful and growing organization for your career advancement goals. About Middough Middough Inc. (Middough), founded in 1950, is a leading professional engineering, architecture and project solutions company providing services to a broad spectrum of Fortune 500 clients in nine core industries with offices across the Central, Midwest and Northeast regions. As a nationally ranked engineering project solutions firm, Middough provides expertise to clients across multiple industries (such as agribusiness, chemical, food & consumer products, government & institutional, manufacturing, metals, pharma/bio, power, and refining) with engineers in multiple disciplines (Architecture, Structural, Civil, Process, Mechanical, Piping, Electrical, Instrumentation & Controls, and Automation). Our diversified team is our greatest asset, and they are challenged with a large variety of interesting projects, management and technical development opportunities and team building experiences. Middough employs the best and brightest individuals, including Interns, who share our passion for excellence and who are dedicated to client satisfaction, quality service, safety awareness and professional development. Intern - Position and Responsibilities As an Intern with Middough, you will become an integral part of a project team(s) assisting with a variety of engineering processes and responsibilities based on the Internship engineering discipline assignment. Responsibilities may include, but are not limited to, the following: • May learn, participate in, or assist with project tasks and technical execution of projects with focus on quality, scope, budget, and schedule., • Interact with other departments, Interns, and project teams to obtain and assist with pertinent project information and tasks., • May participate in projects with pressure relief analysis, flare system design and documentation, Process Flow Drawing (PFD), and P&ID development., • Currently enrolled and working towards an associate degree or Bachelor's of Science in Mechanical Engineering., • Ability to learn new technology efficiently., • Hands-on experience with Microsoft Office products., • Ability to multi-task and be highly organized., • Excellent attention to detail., • Strong analytical and problem-solving skills., • Strong verbal and written communication skills., • Knowledge or ability to learn one or several of the following:, • AutoCAD, • AFT Fathom/AFT Arrow, • Navisworks, • Cesar II, • Compress, • Nozzle Pro, • Remain in a stationary position, often standing or sitting for prolonged periods., • Frequently walk, reach with hands and arms, climb stairs, balance, stoop or kneel, bend or twist, use repeating motions that may include the wrists/hands/fingers and talk and hear., • Frequently use up-close vision, distance vision, depth perceptions, and the ability to adjust focus., • Should not expect adverse environmental conditions within company offices., • May be exposed to adverse environmental conditions (such as climbing ladders and/or stairs, extreme heat and/or cold, and/or poor air quality) if or when on-site at a client facility. Noise levels may be moderate to high at various client sites, hearing protection may be required and/or provided. Safety protections provided by the client and/or company are required to be used and followed., • May require occasional car or air travel to other company locations or client sites. Equal Opportunity Employment We are an equal opportunity employer and value diversity at our company. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, sex, gender identity, sexual orientation, pregnancy, status as a parent, national origin, age, disability (physical or mental), family medical history or genetic information, political affiliation, military service, or other non-merit based factors or any other protected characteristic under protected by federal, state, or local laws. Middough does not support sponsorship for any applicant that requires an employment visa (i.e., H-1B) to work lawfully in the US.

As an Electrical Engineering Department Manager with Middough, you will direct and manage the work of a team to complete work on time, within budget, in accordance with applicable codes/standards, and per Middough work processes and guidelines. The Electrical Engineering Department Manager will also administer corporate policy as required, develop, and implement long term employee development plans and objectives, provide technical and management leadership, assists staff in solving complex problems through technology, lessons learned, development of best practices, and drives all related efforts in the advancement toward technical and project execution excellence. Responsibilities include, but are not limited to, the following: • Plan, develop, coordinate, and direct team members to the successful completion of projects., • Collaborate with senior management in coordinating work for projects., • Determine department technical staffing needs and collaborate with HR to recruit and interview candidates., • Coach and develop team members using best practices, performance management, supportive behavior, and training tools., • Participate in planning, cost-development, project management and scheduling for assigned projects, • Use company work processes to provide quality checks and reviews of all assigned projects., • Manage quality and accuracy standards for the electrical department and review and approve completed technical deliverables., • Perform technical analysis and solutions for complex or unique projects., • Secure peer review to help guarantee quality products are produced per client, industry, and company expectations., • Use scheduling and earned value tool(s) to help ensure forecasting is predictable and projects are completed on time and per budget., • Develop client rapport by providing valued technical and managerial solutions., • Take an active role as needed in support of business development activities to keep team productive., • Accredited Bachelor of Science degree in Electrical Engineering., • Professional Engineer license preferred., • 15+ years of experience in electrical engineering. Preferred areas of knowledge to include Power distribution, system modeling & analysis, protective relay coordination, energy audits, substation design, facility design, Class I, Division I & Division II design, equipment specification, equipment layout, lighting, lightning protection, energy management systems, start-up, and the application of NEC., • 5+ years of people management experience and project team management experience., • Experience with Front End Engineering and Design or Front-End Loading studies., • Working knowledge of Microsoft Office., • Excellent analytical, problem-solving, and attention to detail abilities., • Excellent multitasking and organizational abilities for project efficiency., • Remain in a stationary position, often standing or sitting for prolonged periods., • Frequently walk, reach with hands and arms, climb stairs, balance, stoop or kneel, bend or twist, use repeating motions that may include the wrists/hands/fingers and talk and hear., • Frequently use up-close vision, distance vision, depth perceptions, and the ability to adjust focus., • Should not expect adverse environmental conditions within company offices., • May be exposed to adverse environmental conditions (such as climbing ladders and/or stairs, extreme heat and/or cold, and/or poor air quality) if or when on-site at a client facility. Noise levels may be moderate to high at various client sites, hearing protection may be required and/or provided. Safety protections provided by the client and/or company are required to be used and followed., • May require occasional car or air travel to other company locations or client sites. What Middough Offers We offer a growth and learning culture which encourages and supports employee development through a wide variety of tools and resources such as the company Learning Management System, Middough Learning Center. Middough provides an opportunity to bring your talents and expertise to a successful and growing organization for your career advancement goals. Additionally, we offer a highly competitive compensation and the following comprehensive benefits package, based on eligibility and plan terms/changes: • A hybrid work model for work-life flexibility (based on business and client needs), • Medical, Dental, and Vision coverage, • Company paid Short/Long Term Disability, Life, AD&D, and Travel insurance, • Health Saving and Flexible Spending Accounts, • 401(k) Plan, • Paid Time Off, Company Paid Holidays, • Tuition Assistance, • Paid Certifications and Registrations (as applicable) Equal Opportunity Employment We are an equal opportunity employer and value diversity at our company. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, sex, gender identity, sexual orientation, pregnancy, status as a parent, national origin, age, disability (physical or mental), family medical history or genetic information, political affiliation, military service, or other non-merit based factors or any other protected characteristic under protected by federal, state, or local laws. Middough does not support sponsorship for any applicant that requires an employment visa (i.e., H-1B) to work lawfully in the US.

With more than 100 years of experience, Sika is a worldwide innovation and sustainability leader in the development and production of systems and products for commercial and residential construction, as well as the transportation, marine, automotive, and renewable energy manufacturing industries. Sika is a specialty chemicals company with a globally leading position in the development and production of systems and products for bonding, sealing, damping, reinforcing, and protection in the building sector and industry. Sika has subsidiaries in 103 countries around the world, produces in over 400 factories, and develops innovative technologies for customers worldwide. In doing so, it plays a crucial role in enabling the transformation of the construction and transportation industries toward greater environmental compatibility. Approximately 33,000 employees generated CHF 11.20 billion in sales in 2025. Job Description Watson Bowman Acme, a Sika company, is a manufacturer and supplier of expansion joint solutions for the transportation sector, including bridge and highway fabrication, preservation, and tunnels. This position is responsible for assisting Welding Fitters, Master Fitters, Forepersons, and Manufacturing Supervision staff as directed in the manufacture and assembly of metallic products supplied to the construction industry. More specifically, assist in fitting sub-assemblies as instructed, including but not limited to, tie downs, straightening, grinding, and stud welding on strip seal steel rails, using hand tools, overhead cranes, and welding equipment. Attention to safety and quality is essential to this position. Salary Range: $24 - $27 an hour based on education, experience, and qualifications of the applicant. Qualifications • High school diploma or equivalency required, additional course work with emphasis on welding preferred., • Ability to read and understand shop drawings and other written instructions., • Use of hand tools and basic TIG and GMAW welding., • Comply with all safety regulations, including Safe Work Permits, training requirements, and use of safety equipment., • Must be able to lift and manage material of up to 50 pounds unassisted; walk or stand for long periods of time; bend, stoop, or kneel if required; wear all required PPE., • Possess the legal right to work and remain in the United States without sponsorship. Additional Information • 401k with Generous Company Match, • Bonuses, • Medical, Dental, and Vision Benefits, • Paid Parental Leave, • Life Insurance, • Disability Insurance, • Paid time off, paid holidays, • Floating holidays + Paid Volunteer Time, • Wellness/Fitness Reimbursements, • Education Assistance, • Professional Development Opportunities We offer competitive salaries, aligned with local market benchmarks and the specific scope and responsibilities of each role. Compensation is determined based skills relevant to the position, education and/or training. We are committed to fair and equitable pay practices in accordance with applicable laws and regulations.

Job Description Maintenance Technician Facility: Buffalo, NY General Description The Maintenance Technician is responsible to assure that the manufacturing/process areas are always kept in good mechanical repair and working order as well as in constant production mode. They will support production with preventative and corrective maintenance, fabrication and machining of fixtures and other devices. They must be able to use safety policy and lockout tagout to ensure no risk of injury to themselves or other employees. Specific Duties • Order proper materials for job completion., • Follow all lockout tagout procedures., • Perform preventative and corrective maintenance on mechanical equipment., • Complete required records for work performed., • Perform planned maintenance inspections as required., • Maintain equipment to ensure maximum reliability., • Troubleshoot mechanical equipment failures and repair all process and plant equipment as necessary., • Fabricate and machine fixtures and other devices to support Production., • Must keep work area clean, neat, and orderly. Perform general housekeeping functions daily as required to maintain a safe and clean work environment., • Communicate professionally with everyone in the plant., • Follow instruction from the Shift Leader and Manager., • Work overtime as required., • Fill in or cross train in other departments as assigned., • Follow all applicable environmental, health and safety rules and procedures and immediately report all dangerous situations, near-misses, and injuries., • Participate in developing and updating risk assessments and review all applicable risk assessments annually. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Qualifications • High School Diploma or GED preferred., • Complete tasks with minimal supervision., • Basic mechanical aptitude., • Ability to use hand and shop tools., • Proven mechanical, hydraulic, and pneumatic skills., • Mechanical experience in either manufacturing or related areas., • Good communication skills are required., • Ability to lift 60 pounds on a regular basis, multiple times an hour., • Must be able to work in an un-airconditioned environment for a minimum of 8 hours per day. Physical Demands • The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully., • The employee frequently is required to stand; walk, talk and hear. The employee is occasionally required to climb or balance and stoop. A large degree of lifting (moderate to heavyweight), bending, squatting and maneuvering. Specific vision abilities required by this job include close vision, for viewing a computer terminal distance vision, peripheral vision, depth perception vision for moving objects and ability to adjust focus., • This position is not substantially exposed to adverse environmental conditions., • The ability to work with chemicals in the proper environment and while wearing PPE. Personal Protective Equipment The following list of PPE is required while in the manufacturing area: • Safety Glasses conforming to ANSI Z87.1 or higher, • Steel Toe Safety Shoes conforming to OSHA General Industry Standards 29 CFR 1910, • Hearing protection conforming to OSHA General Industry Standards 29 CFR 1910, • The ability to wear a full or half face respirator conforming to OSHA General Industry Standards 39 CFR 1910.134, • Additional PPE may be required depending on the department Hutchinson Industries, Inc. is an equal opportunity employer. This is a non-exempt position. Hutchinson Industries, Inc. reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between Hutchinson Industries, Inc. nor the employee, and either one may terminate employment without notice at any time.

Job Description Production Operator-Spin Molder I Facility: Buffalo, NY General Description The Production Operator – Spin Molder I is responsible to effectively operate the spinner, as well as any secondary equipment to which they are assigned, safely and efficiently. They must use any required equipment, molds, tooling, and measuring devices to ensure a quality product is produced. They must demonstrate the ability to take directions from the immediate manager and designated management representatives. Specific Duties • Retains all specific duties of Production Operator Job Description., • Follow proper start up and shut down procedures when using spin molding machines., • Alert immediate manager of any issues with spin molding machines and assist with cleaning and maintenance of the equipment when safe and appropriate., • Follow all applicable environmental, health and safety rules and procedures and immediately report all dangerous situations, near-misses, and injuries., • Participate in developing and updating risk assessments and review all applicable risk assessments annually. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Qualifications • Retains all qualifications of Production Operator Job Description., • Previous experience working in with molding equipment is preferred. Physical Demands • The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully., • The employee frequently is required to stand; walk, talk and hear. The employee is occasionally required to climb or balance and stoop. A large degree of lifting (moderate to heavyweight), bending, squatting and maneuvering. Specific vision abilities required by this job include close vision, for viewing a computer terminal distance vision, peripheral vision, depth perception vision for moving objects and ability to adjust focus., • This position is not substantially exposed to adverse environmental conditions., • The ability to work with chemicals in the proper environment and while wearing PPE. Personal Protective Equipment The following list of PPE is required while in the manufacturing area: • Safety Glasses conforming to ANSI Z87.1 or higher, • Steel Toe Safety Shoes conforming to OSHA General Industry Standards 29 CFR 1910, • Hearing protection conforming to OSHA General Industry Standards 29 CFR 1910, • The ability to wear a full or half face respirator conforming to OSHA General Industry Standards 39 CFR 1910.134, • Additional PPE may be required depending on the department Hutchinson Industries, Inc. is an equal opportunity employer. This is a non-exempt position. Hutchinson Industries, Inc. reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between Hutchinson Industries, Inc. nor the employee, and either one may terminate employment without notice at any time.

Job Description Production Operator-Wheel Assembly Technician Facility: Buffalo, NY General Description The Production Operator – Wheel Assembly Technician is responsible to effectively operate the tire changer, as well as any secondary equipment to which they are assigned, safely and efficiently. They must use any required equipment, tooling, and measuring devices to ensure a quality product is produced. They must demonstrate the ability to take directions from the immediate manager and designated management representatives. Specific Duties • Retains all specific duties of Production Operator Job Description., • Install runflats in properly without damage to the wheel and tire, and without leaving any unnecessary components or tools inside the assembly., • Follow proper start up and shut down procedures when using tire install machines., • Alert immediate manager of any issues with tire install machines and assist with cleaning and maintenance of the equipment when safe and appropriate., • Follow all applicable environmental, health and safety rules and procedures and immediately report all dangerous situations, near-misses, and injuries., • Participate in developing and updating risk assessments and review all applicable risk assessments annually. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Qualifications • Retains all qualifications of Production Operator Job Description., • Previous experience working with a tire changer is preferred., • A reasonable level of mechanical aptitude and attention to detail is needed to properly install the runflats, in the correct sequence, using the designated tools and fixturing, without creating any quality defects. Physical Demands • The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully., • The employee frequently is required to stand; walk, talk and hear. The employee is occasionally required to climb or balance and stoop. A large degree of lifting (moderate to heavyweight), bending, squatting and maneuvering. Specific vision abilities required by this job include close vision, for viewing a computer terminal distance vision, peripheral vision, depth perception vision for moving objects and ability to adjust focus., • This position is not substantially exposed to adverse environmental conditions., • The ability to work with chemicals in the proper environment and while wearing PPE. Personal Protective Equipment The following list of PPE is required while in the manufacturing area: • Safety Glasses conforming to ANSI Z87.1 or higher, • Steel Toe Safety Shoes conforming to OSHA General Industry Standards 29 CFR 1910, • Hearing protection conforming to OSHA General Industry Standards 29 CFR 1910, • The ability to wear a dust mask conforming to OSHA General Industry Standards 39 CFR 1910.134, • Additional PPE may be required depending on the department Hutchinson Industries, Inc. is an equal opportunity employer. This is a non-exempt position. Hutchinson Industries, Inc. reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between Hutchinson Industries, Inc. nor the employee, and either one may terminate employment without notice at any time.

Job Description Production Operator- Panel Assembler Facility: Buffalo, NY General Description The Production Operator – Panel Assembler is responsible to effectively operate the booth & work cell, as well as any secondary equipment to which they are assigned, safely and efficiently. They must use any required equipment, tooling, and measuring devices to ensure a quality product is produced. They must demonstrate the ability to take directions from the immediate manager and designated management representatives. Specific Duties • Retains all specific duties of Production Operator Job Description., • Follow proper start up and shut down procedures when booths., • Alert immediate manager of any issues with booths and assist with cleaning and maintenance of the equipment when safe and appropriate., • Ability to place panels correctly to reduce rework and extra trimming on tanks., • Follow all applicable environmental, health and safety rules and procedures and immediately report all dangerous situations, near-misses, and injuries., • Participate in developing and updating risk assessments and review all applicable risk assessments annually. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Qualifications • Retains all qualifications of Production Operator Job Description., • Previous experience working with adhesives in a manufacturing environment is preferred. Physical Demands • The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully., • The employee frequently is required to stand; walk, talk and hear. The employee is occasionally required to climb or balance and stoop. A large degree of lifting (moderate to heavyweight), bending, squatting and maneuvering. Specific vision abilities required by this job include close vision, for viewing a computer terminal distance vision, peripheral vision, depth perception vision for moving objects and ability to adjust focus., • This position is not substantially exposed to adverse environmental conditions., • The ability to work with chemicals in the proper environment and while wearing PPE. Personal Protective Equipment The following list of PPE is required while in the manufacturing area: • Safety Glasses conforming to ANSI Z87.1 or higher, • Steel Toe Safety Shoes conforming to OSHA General Industry Standards 29 CFR 1910, • Hearing protection conforming to OSHA General Industry Standards 29 CFR 1910, • The ability to wear a dust mask conforming to OSHA General Industry Standards 39 CFR 1910.134, • Additional PPE may be required depending on the department Hutchinson Industries, Inc. is an equal opportunity employer. This is a non-exempt position. Hutchinson Industries, Inc. reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between Hutchinson Industries, Inc. nor the employee, and either one may terminate employment without notice at any time.

HVAC Data Center Technician - Buffalo, NY areaTravel 90% About US:Munters is a global leader in climate solutions for mission-critical processes. We offer innovative, efficient and sustainable solutions for customers in industries where controlling indoor humidity, temperature and energy efficiency is mission critical. Climate control systems often account for a large percentage of energy consumption in many of our customers'operations. With an optimal climate system, we can help them to more efficiently use energy or waterresources and thereby reduce their climate and environmental impact. Sustainability is an important part of Munters' business strategy and value creation.We pride ourselves on fostering a dynamic and inclusive work environment where interns are valued members of the team and are given meaningful projects to work on.Job Summary:Data Center Service Technicians travel to customer sites to start up, commission and safely troubleshoot and repair Data Center equipment. This position requires the ability to work independently, and candidates should have strong diagnostic and troubleshooting skills. Requires some ability to manage the projects while onsite for start-up commissioning and coordination of other trades and services.Essential Functions and Responsibilities: • Perform factory start-up, commissioning, warranty and billable service on Munters Data Center equipment and systems., • Maintain and protect Munters equipment and property., • Respond in a timely manner to all requests for service from customers or management., • Provide customer training on Munters equipment., • Provide technical feedback on equipment using detailed field service reports., • Understand that Field Service's major role is one of instant response to customers' needs and focus as a part of a team always makes us available to our customer needs, urgent or otherwise.Requirements:, • 5+ years of experience and extensive knowledge in the Mechanical field specifically the HVAC field., • Frequent travel required, up to 90%, across the USA by plane and car., • Extensive knowledge in electrical troubleshooting, able to diagnose electrical issues with proficiency and record data., • Knowledge of all safety procedures and requirements and has training in Arc flash, lock out tag out and other safety requirements. Understands and knows how to utilize all PPE associated with electrical safety., • Extensive refrigeration knowledge. Understands how to pressure test, evacuate, and charge systems without assistance. Understands the refrigeration system concepts and can fully troubleshoot and diagnose refrigeration problems. Proficient in brazing and soldering. Holds a universal refrigeration card., • Extensive knowledge in Controls, has experience with troubleshooting, programming, or downloading to controls systems. Understands PLC's and how to work with all types of platforms. Knows how to access information from PLC's and be able to adjust. Able to connect to a PLC with a computer to communicate and make changes., • (Optional) State Licensed Master HVAC mechanic. This requires years of experience, training and testing along with experience working under other experienced professionals to achieve., • Strong written and verbal communications skills, • Self-Motivated, with the ability to work independently., • Ability to communicate well with other site personnel as well as Sales PM, Service Manager and Technical Support personnel.Education:, • High Diploma or equivalent. Trade School desired.Physical Requirements:, • Heavy Work: Exerting up to 75 pounds of force occasionally and/or up to 20 pounds of force frequently, and/or up to 20 pounds of force constantly to move objects., • Climbing, stooping, kneeling, crouching, reaching, standing, walking, pushing, pulling, lifting, • The worker is required to have close visual acuity to perform an activity such as: preparing and analyzing data, viewing computer terminals, expansive reading, etc.Work Conditions:, • You must wear personal protective equipment such as safety glasses, safety boots, hard hats, and hearing protection where the company requires., • Ability to travel and be away from home for several days at a time., • Willingness to take "On-call" duties as required., • Willingness to occasionally work weekends and/or holidays., • Willingness to work outdoors in all types of weather conditions., • Willingness and ability to work 6 feet or more above the ground as required.Benefits:, • Competitive Salary, • Comprehensive health, dental, and vision insurance plans, • Flexible work schedule, • Generous vacation and paid time off, • 401K retirement savings plan with employer matching, • Professional development opportunities, including tuition reimbursement, and conference attendance, • Company-sponsored social events and team-building activities, • State-of-the-art equipment and tools to support your workEqual Opportunity Employer:We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. All offers are contingent on a pre-employment drug test and background check, as applicable for the position

Job Description Specific Duties • Retains all specific duties of Production Operator Job Description., • Follow proper start up and shut down procedures when booths., • Alert immediate manager of any issues with booths and assist with cleaning and maintenance of the equipment when safe and appropriate., • Ability to place panels correctly to reduce rework and extra trimming on tanks., • Follow all applicable environmental, health and safety rules and procedures and immediately report all dangerous situations, near-misses, and injuries., • Participate in developing and updating risk assessments and review all applicable risk assessments annually. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Qualifications • Retains all qualifications of Production Operator Job Description., • Previous experience working with adhesives in a manufacturing environment is preferred. Physical Demands • The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully., • The employee frequently is required to stand; walk, talk and hear. The employee is occasionally required to climb or balance and stoop. A large degree of lifting (moderate to heavyweight), bending, squatting and maneuvering. Specific vision abilities required by this job include close vision, for viewing a computer terminal distance vision, peripheral vision, depth perception vision for moving objects and ability to adjust focus., • This position is not substantially exposed to adverse environmental conditions., • The ability to work with chemicals in the proper environment and while wearing PPE. Personal Protective Equipment The following list of PPE is required while in the manufacturing area: • Safety Glasses conforming to ANSI Z87.1 or higher, • Steel Toe Safety Shoes conforming to OSHA General Industry Standards 29 CFR 1910, • Hearing protection conforming to OSHA General Industry Standards 29 CFR 1910, • The ability to wear a dust mask conforming to OSHA General Industry Standards 39 CFR 1910.134, • Additional PPE may be required depending on the department Hutchinson Industries, Inc. is an equal opportunity employer. This is a non-exempt position. Hutchinson Industries, Inc. reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between Hutchinson Industries, Inc. nor the employee, and either one may terminate employment without notice at any time. 1st Shift: 6:00 am-4:30 pm Monday-Thursday About Us We are 40 000 men and women who meet the challenges faced by our automotive, aviation, defence and industry customers every day. Our passion for challenge and our enthusiasm encourage us to imagine, design and produce high performance and innovative fluid, sealing system and anti-vibration solutions. Working at Hutchinson means being curious about everything, contributing to the evolution of mobility and reducing carbon emissions. Join us and show what drives you! A French company with an international presence (25 countries): 170 years of history and passing on our know-how. 5 billion in turnover, with 5% invested in R&D.

Job Description Specific Duties • Retains all specific duties of Production Operator Job Description., • Follow proper start up and shut down procedures when booths., • Alert immediate manager of any issues with booths and assist with cleaning and maintenance of the equipment when safe and appropriate., • Ability to place panels correctly to reduce rework and extra trimming on tanks., • Follow all applicable environmental, health and safety rules and procedures and immediately report all dangerous situations, near-misses, and injuries., • Participate in developing and updating risk assessments and review all applicable risk assessments annually. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Qualifications • Retains all qualifications of Production Operator Job Description., • Previous experience working with adhesives in a manufacturing environment is preferred. Physical Demands • The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully., • The employee frequently is required to stand; walk, talk and hear. The employee is occasionally required to climb or balance and stoop. A large degree of lifting (moderate to heavyweight), bending, squatting and maneuvering. Specific vision abilities required by this job include close vision, for viewing a computer terminal distance vision, peripheral vision, depth perception vision for moving objects and ability to adjust focus., • This position is not substantially exposed to adverse environmental conditions., • The ability to work with chemicals in the proper environment and while wearing PPE. Personal Protective Equipment The following list of PPE is required while in the manufacturing area: • Safety Glasses conforming to ANSI Z87.1 or higher, • Steel Toe Safety Shoes conforming to OSHA General Industry Standards 29 CFR 1910, • Hearing protection conforming to OSHA General Industry Standards 29 CFR 1910, • The ability to wear a dust mask conforming to OSHA General Industry Standards 39 CFR 1910.134, • Additional PPE may be required depending on the department Hutchinson Industries, Inc. is an equal opportunity employer. This is a non-exempt position. Hutchinson Industries, Inc. reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between Hutchinson Industries, Inc. nor the employee, and either one may terminate employment without notice at any time. 1st Shift: 6:00 am-4:30 pm Monday-Thursday About Us We are 40 000 men and women who meet the challenges faced by our automotive, aviation, defence and industry customers every day. Our passion for challenge and our enthusiasm encourage us to imagine, design and produce high performance and innovative fluid, sealing system and anti-vibration solutions. Working at Hutchinson means being curious about everything, contributing to the evolution of mobility and reducing carbon emissions. Join us and show what drives you! A French company with an international presence (25 countries): 170 years of history and passing on our know-how. 5 billion in turnover, with 5% invested in R&D.

Job Description Specific Duties • Retains all specific duties of Production Operator Job Description., • Follow proper start up and shut down procedures when booths., • Alert immediate manager of any issues with booths and assist with cleaning and maintenance of the equipment when safe and appropriate., • Ability to place panels correctly to reduce rework and extra trimming on tanks., • Follow all applicable environmental, health and safety rules and procedures and immediately report all dangerous situations, near-misses, and injuries., • Participate in developing and updating risk assessments and review all applicable risk assessments annually. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Qualifications • Retains all qualifications of Production Operator Job Description., • Previous experience working with adhesives in a manufacturing environment is preferred. Physical Demands • The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully., • The employee frequently is required to stand; walk, talk and hear. The employee is occasionally required to climb or balance and stoop. A large degree of lifting (moderate to heavyweight), bending, squatting and maneuvering. Specific vision abilities required by this job include close vision, for viewing a computer terminal distance vision, peripheral vision, depth perception vision for moving objects and ability to adjust focus., • This position is not substantially exposed to adverse environmental conditions., • The ability to work with chemicals in the proper environment and while wearing PPE. Personal Protective Equipment The following list of PPE is required while in the manufacturing area: • Safety Glasses conforming to ANSI Z87.1 or higher, • Steel Toe Safety Shoes conforming to OSHA General Industry Standards 29 CFR 1910, • Hearing protection conforming to OSHA General Industry Standards 29 CFR 1910, • The ability to wear a dust mask conforming to OSHA General Industry Standards 39 CFR 1910.134, • Additional PPE may be required depending on the department Hutchinson Industries, Inc. is an equal opportunity employer. This is a non-exempt position. Hutchinson Industries, Inc. reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between Hutchinson Industries, Inc. nor the employee, and either one may terminate employment without notice at any time. 1st Shift: 6:00 am-4:30 pm Monday-Thursday About Us We are 40 000 men and women who meet the challenges faced by our automotive, aviation, defence and industry customers every day. Our passion for challenge and our enthusiasm encourage us to imagine, design and produce high performance and innovative fluid, sealing system and anti-vibration solutions. Working at Hutchinson means being curious about everything, contributing to the evolution of mobility and reducing carbon emissions. Join us and show what drives you! A French company with an international presence (25 countries): 170 years of history and passing on our know-how. 5 billion in turnover, with 5% invested in R&D.

Environmental, Health, Safety & Security [Safety Officer / Law Enforcement] As a Security Officer at Tesla, Inc. Provide customer service to executive staff, personnel, guests and contractors; Be responsible for the access control of assigned location; Ensure the physical protection of personnel, an

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Provides day-to-day supervision and operations support for shift operators. Primary Duties/Responsibilities: • Direct shift operators in basic duties, setting priorities, troubleshooting operational and mechanical issues., • Interface with the client and contractors as needed when the Project Manager is not available., • Operate equipment manually and through instrumentation panels, computer terminals and programmable logic control units following process control procedures. Monitors and observes operating conditions, records observations and data in shift log. Diagnoses basic operational problems and takes corrective action per procedure., • Performs CLAIR (cleaning, lubrication, adjustment, inspection and minor repair) on machines and related equipment which may include pumps, valves, gates, mixers, conveyors, compressors, dryers, chemical feed, boilers, and chillers. Reports and documents results of work performed and enters into appropriate database., • Promptly reports any operational problems with machines or equipment to the Asset Manager and/or Project Manager., • Troubleshoots mechanical, hydraulic or pneumatic equipment to determine repairs needed. Dismantles equipment to gain access to and repairs defective parts using hand tools, power tools and precision measuring and testing devices. Re-assembles and tests equipment ensuring safe and efficient operating condition is restored., • Collects water and wastewater samples according to schedule. Performs field tests in order to pace chemical dosages for process and odor control units. Prepares chemical solutions, monitors supplies and recommends reorder., • Performs lab tests and prepares reports per procedure. Analyzes parameters including pH, alkalinity, chlorine residuals and other tests as required., • Performs maintenance on lab and field equipment and instrumentation including pH meters, specific ion meters., • Changes and cleans probes, magnetic strips, floats and sensors on instrumentation., • Performs instrument calibration, including resetting of set points as assigned., • Performs facility maintenance and repair and may replace or install light bulbs, florescent tubes, and paint., • Performs manual labor including cleaning equipment, facilities and grounds as required and properly disposes of waste according to safety and environmental policies., • Spends 100% of time in operations / light maintenance environment., • Typically spends 5 – 10% of time exposed to outdoor and sometimes inclement weather., • Required to work on rotating 7/24 shift schedule when shift operators are not available., • Possible Work Hazards: May be exposed to possible operations hazards including fumes, dust, toxic and caustic chemicals, noise, rotating machinery, high pressure and hot and cold temperatures, slippery surfaces, water and electrical hazards. Qualifications Education/Experience/Background: • High school or GED with the ability to read, write and comprehend English (operational, process, safety and quality instructions) and be able to carry out verbal and written instructions., • Ability to perform basic mathematical calculations., • Some vocational training and mechanical aptitude required, with the ability to read, interpret and record data from meters, gauges, scales, panels, computer consoles and other equipment., • Must demonstrate proficiency in the care and use of all site specific, facility required PPE (Personal Protection Equipment), including respirators, etc., • Must consistently demonstrate the ability to perform all assigned tasks in an accurate and timely manner., • Must demonstrate ability to efficiently operate and perform minor PM’s on a variety of equipment which may include pumps, valves, mixers, chemical feed equipment, boilers, compressors, and chillers., • Knowledge of HOA (Hand – Off – Auto) operational controls and how settings apply to operational control scheme., • Must have the ability to diagnose mechanical and process problems in multiple unit processes, troubleshoot mechanical, electro-mechanical, hydraulic or pneumatic equipment and take corrective action within policy and procedure limitations., • Good verbal and written communication skills are necessary., • Must be able to work a 12-hour shift rotation, 7/24 shift schedule (Dupont Schedule) as needed to cover operator shift as needed. Must be able to cover OT shifts as required., • Must have or be able to obtain a Class 2 New York Boiler License as required by regulatory agency at site within 6 months of start date., • Must possess a valid driver’s license and a safe driving record., • Employee Orientation, Departmental Operating Procedures, Safety, OSHA and Quality Training., • Forklift Certification., • Class 2 City of Buffalo Stationary Engineer license., • Works in various positions; works on ladders, catwalks, and supports at heights of 30 feet above the ground; and works with hands extended above and below head and body up to 40 minutes using hand tools weighing up to 15 pounds., • Must be able to lift and carry 50 pounds (occasionally 60 pounds) distances of 50 feet., • Occasional stooping, bending or kneeling and entering confined spaces., • Required to turn valve handles and wheels on valves., • Required to use shovels for snow removal or material transfer., • Must be able safely drive a powered industrial forklift. Additional Information Pay Range: $43.00 to $50.00 per hour. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description Salary: $85,000-$95,000 Other Forms of Compensation: Pay Grade: 15 Crothall Healthcare, a Compass Healthcare company, provides specialized, high-quality, innovative, and responsive support services exclusively to the healthcare industry. Crothall serves many of the Top 100 Hospitals throughout its over 900 hospital partners across 46 states. Crothall has been recognized as one of Modern Healthcare’s Best Places to Work and Best Places to Work in Pennsylvania since 2013. Crothall has more than 32,000 team members, with core services include: Environmental Services, Patient Transportation, Patient Observation, Healthcare Facilities Management, Sterile Processing Services, and Ambulatory EVS. Learn more at . Job Summary Director of Human Resources Grade 15 The job has multi-campus responsibilities included but are not limited to advising, developing, and administering human resources policies in the areas of employee engagement, recruitment, separation, employee relations, employee retention, disability and leave management, benefits, job descriptions, compensation, performance management, training, safety, worker’s compensation and project management. Employee Engagement/Retention • Works with management teams to drive employee engagement in association with client goals., • Helps drive participation in corporate engagement survey, action planning and improvement in engagement, • Drives retention through good Employee relations practices and employee engagement, • Facilitate and have responsibility for 30/60/90 evaluation process with all new hires Recruitment • Accesses current recruitment processes and makes recommendations for improvement, • Ensures compliance with the Compass Group Talent Acquisition and client partner recruiting protocols., • Submitting and responsibility for candidate pipeline, onboarding process, • Record Keeping, planning & facilitating onboarding for hourly Employee Relations • Liaison with managers and the client HR teams, • Helps establish best practices and drives consistency in employee relations issues, including term Manage and insure employee retention strategies are in place and properly executed., • Supports EEOC and law suit claims documentation and delivers training where needed on Performance Management/employee relations concerns/needs., • Manages employee relations to include working with employees to resolve sensitive or difficult work-related problems, investigation, employee coaching and performance issues Human Resources Compliance • Ensures all necessary hiring and termination paperwork is filed appropriately., • Assist locations on employee file maintenance to ensure they are in compliance with all state and federal laws., • Ensures Regulatory Compliance for I-9 and Wage and Hour laws and Labor Relations, • Participates in labor relations disputes and negotiations, • Serves as the leave of absence liaison between employee and LOA department to ensure compliance Other • Assists with communicating employee benefits programs and to escalate/resolve benefits issues or inquiries., • Ensure payroll is being completed timely and no pay issues, • Training regarding HR & LR as well as LWS learning in coordination with site leadership, • Supports Management soft skills training in coordination with site leadership QUALIFICATIONS: • Bachelor’s degree in related area and/or the equivalent experience/training, • Thorough knowledge of human resources, • SHRM: CP, SCP, and or PHR, SPHR certifications preferred. Apply to Crothall today! Crothall is a member of Compass Group USA Click here to Learn More about the Compass Story Associates at Crothall are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Flexible Time Off, • Holiday Time Off (varies by site/state), • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs), • Paid Parental Leave Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. We encourage applicants with a criminal history (and driving history) to apply. Applications are accepted on an ongoing basis. Crothall maintains a drug-free workplace. Req ID: 1499533 Crothall Healthcare RANDY ERPELDING [[req_classification]]

Job Description Quality Control Technician Facility: Buffalo, NY General Description The Quality Technician is responsible for ensuring the highest possible quality of all products manufactured. The position requires that all facets of the production inspection process be monitored including, but not limited to, raw material certifications, in-process quality controls, and final inspections. Specific Duties · Inspect all incoming raw materials to ensure their integrity and that all material specifications have been met. · Ensure that all products being shipped are inspected within quality standards and recorded into the system with all the necessary information. · Perform CMM inspection on setup parts and parts coming from in-process production as needed for sampling. · Monitor the preparation of all shop work orders, travelers, in-process inspection forms, and related documentation to ensure that they are consistent with the ISO standards as stated in the company’s quality manual. · Monitor all quality control inspections throughout the production process to ensure that the company complies with its internal quality standards, as well as those outlined in our ISO – 9001-2015 standards. · Ensure that all quality-measuring devices are regularly calibrated per our internal standard. · Conduct in process inspection and audits when directed. · Keep files of all production jobs and the raw materials records and quality control reports related to each task. · Issue the final inspection report and/or sign off for each job completed in the shop. · Communicate all quality issues to management promptly, along with recommendations for any corrective actions that may be necessary. · Perform paint line inspections as needed. · Follow directions from the Quality Control Supervisor. · Follow all applicable environmental, health and safety rules and procedures and immediately report all dangerous situations, near-misses, and injuries. · Participate in developing and updating risk assessments and review all applicable risk assessments annually. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Qualifications · Previous experience working in a production machining environment preferred. · Ability to read and interpret blueprints, 1st article inspections, receiving, shipping, and painting inspection. · PPAP experience a plus. · Must be proficient in Microsoft Office applications. · Manual inspection experience. Proficient using micrometers, calipers, height gages, and all standard shop measuring tools. · CMM Operator/Programmer experience a plus Hexagon PCdimis software. Physical Demands · The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully. · The employee frequently is required to stand; walk, talk and hear. The employee is occasionally required to climb or balance and stoop. A large degree of lifting (moderate to heavyweight), bending, squatting and maneuvering. Specific vision abilities required by this job include close vision, for viewing a computer terminal distance vision, peripheral vision, depth perception vision for moving objects and ability to adjust focus. · This position is not substantially exposed to adverse environmental conditions. · The ability to work with chemicals in the proper environment and while wearing PPE. Personal Protective Equipment The following list of PPE is required while in the manufacturing area: · Safety Glasses conforming to ANSI Z87.1 or higher · Steel Toe Safety Shoes conforming to OSHA General Industry Standards 29 CFR 1910 · Hearing protection conforming to OSHA General Industry Standards 29 CFR 1910 · The ability to wear a dust mask conforming to OSHA General Industry Standards 39 CFR 1910.134 · Additional PPE may be required depending on the department Hutchinson Industries, Inc. is an equal opportunity employer. This is a non-exempt position. Hutchinson Industries, Inc. reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between Hutchinson Industries, Inc. nor the employee, and either one may terminate employment without notice at any time.

Job DescriptionDescription: Position Summary: Valor Healthcare is looking for licensed psychologists conduct in-person psychological evaluations of candidates for the Forest Ranger program to support the NYS Department of Environmental Conservation (NYSDEC), Office of Public Protection (OPP). This is a short term contract position working as a 1099 independent contractor. Responsibilities: • Must have excellent writing skills, with the ability to translate sound clinical judgment into clear and appropriate recommendations for initial or continued employment., • Complete and submit all required documentation expeditiously and accurately in the required format., • Provide in-person evaluations., • Provide exceptional customer service. Requirements: Qualifications: • PsyD or PhD from an accredited doctoral program., • Must have a valid and unrestricted NY state license., • Must have at least three (3) years of prior experience in assessing the suitability of candidates for employment as police officers/law enforcement., • Experienced in one or more Electronic Health Records, • Microsoft Office (Word, Excel, Outlook, PowerPoint, and Teams), • Must be a US citizen and reside in the United States. $175 - $200 per evaluation 1099 contractor This job is CONTINGENT upon contract award, client approval, completion of a favorable background investigation, and the ability to obtain and maintain a Public Trust / High Risk clearance. Valor Healthcare is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status

Job Description Environmental Technician Momentum Environmental provides industrial cleaning, waste management, emergency response and remediation services in the northeastern US and services a repeat blue chip customer base. The technician provides a variety of hands-on services at customer locations as part of an onsite team. The Environmental Technician (Technician) works as part of environmental field teams at customer or Momentum locations. While an entry level position, the Technician is afforded immediate opportunities to expand their skill sets and grow into higher level positions. The Oswego Area Technician reports to the Supervisor and is responsible for a wide variety of technical, safety and operational responsibilities in support of the safe and profitable execution of environmental, industrial, remediation and waste services. Essential Responsibilities • Plays an active role in the Company’s Health and Safety system including safety planning, toolbox safety talks, near miss reporting and hazard communication., • Performs technical and manual labor tasks supporting a wide variety of industrial cleaning, emergency response, waste management and remediation services., • Participates in emergency response engagements by being a part of on call service rotations., • Works directly with Supervisors and Project Managers to execute service engagements safely, on time and within budget., • Operates small tools and other pneumatic and hydro driven equipment in support of cleaning or containment activities., • Communicates regularly with other operational colleagues on technical and quality control elements of service engagements as well as dynamic schedules., • Maintains an unwavering commitment to the adherence of all state, local, and federal environmental laws, and regulations. Position Qualification Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The following requirements are representative of the knowledge, skill and/or ability required by the position. Core Competencies • Ability to work safely and cohesively as part of a team with the desire to grow into leadership positions., • At least 1 year of industrial cleaning or environmental experience is preferred, • Ability to develop an understanding of OSHA, RCRA, and DOT regulations as they relate to field services., • High emotional intelligence and ability to develop relationships/ trust with team members • Strong verbal communication skills, • Ability to effectively interact with management, other departments, and vendors., • Ability to travel to most areas of upstate New York for job site support., • Able to work nights and weekends when needed. Personal Protective Equipment When working at a customer site or in a field environment, as appropriate, the ability to wear any of the following personal protective equipment (PPE) required: • Steel toe boots, • Eye protection, • Hearing protection, • Gloves/ Hand protection, • Fire resistant uniform, • Head Protection, • Respiratory Protection, • Others as required by OSHA, Internal EH&S, and customer/ site EH&S Work Environment While performing essential duties of this position an individual regularly works in a variety of environments, and is required to see, talk, hear, reach with hands, stand, walk, drive frequently, use a computer keyboard, mouse, telephone, and other office equipment. Essential duties require bending, squatting, and twisting frequently. The employee will frequently be exposed to dirt, dust, and fumes. Noise levels of the typical work environment is moderate but may vary depending on customer site visits. The employee will occasionally be required to lift/move up to 75 lbs.

Job DescriptionCompany Description With more than 100 years of experience, Sika is a worldwide innovation and sustainability leader in the development and production of systems and products for commercial and residential construction, as well as the transportation, marine, automotive, and renewable energy manufacturing industries. Sika is a specialty chemicals company with a globally leading position in the development and production of systems and products for bonding, sealing, damping, reinforcing, and protection in the building sector and industry. Sika has subsidiaries in 103 countries around the world, produces in over 400 factories, and develops innovative technologies for customers worldwide. In doing so, it plays a crucial role in enabling the transformation of the construction and transportation industries toward greater environmental compatibility. Approximately 33,000 employees generated CHF 11.20 billion in sales in 2025. Job Description Watson Bowman Acme, a Sika company, is a manufacturer and supplier of expansion joint solutions for the transportation sector, including bridge and highway fabrication, preservation, and tunnels. We are looking to hire an Estimator located in Amherst, New York. Primary responsibility of this position is to serve as the point of contact for the Sales team by creating accurate takeoffs and quotations in the Infrastructure target market (bridge and tunnel). Prepare estimates that include calculation of materials, engineering time, shop labor, subcontract scope if required, and shipping and handling charges. This role will also evaluate project bid specifications and drawings ensuring the Sales team is accurately informed to position WBA properly and competitively in the marketplace. This role will work closely with Engineering, Supply Chain, Manufacturing Engineering, and Production to understand internal capabilities, and partner with Procurement to obtain subcontract material and labor pricing with lead times as required. Annual Salary Range: $60,000-80,000 based on education, experience, and qualifications of applicant. Qualifications • Associates degree in Engineering or Construction discipline; Bachelor’s degree in a similar field is preferred., • Previous related experience in steel fabrication, manufacturing, general construction, or bridge construction is preferred., • Must be proficient in Microsoft office, especially Excel. Previous experience using SAP or ProCore to create estimates and quotations is preferred., • A thorough understanding of contract documents, with ability to independently act and respond to commercial and technical inquiries., • Strong technical aptitude in order to provide technical support and product recommendations in support of growth opportunities and initiatives., • Excellent communication (written and verbal) skills, including active listening skills with internal and external customers; ability to collaborate with various departments to coordinate estimates, and ability to develop partnerships with customers on project-specific opportunities., • Ability to prioritize and manage multiple projects and objectives simultaneously; provide accurate information and deliverables on time., • Demonstrate initiative, take ownership of the process, and drive continuous improvement. Additional Information • 401k with Generous Company Match, • Bonuses, • Medical, Dental, and Vision Benefits, • Paid Parental Leave, • Life Insurance, • Disability Insurance, • Paid time off, paid holidays, • Floating holidays + Paid Volunteer Time, • Wellness/Fitness Reimbursements, • Education Assistance, • Professional Development Opportunities We offer competitive salaries, aligned with local market benchmarks and the specific scope and responsibilities of each role. Compensation is determined based skills relevant to the position, education and/or training. We are committed to fair and equitable pay practices in accordance with applicable laws and regulations.

Job Description Salary: $100,000- $120,000/yr Other Forms of Compensation: Pay Grade: 15 Crothall Healthcare, a Compass Healthcare company, provides specialized, high-quality, innovative, and responsive support services exclusively to the healthcare industry. Crothall serves many of the Top 100 Hospitals throughout its over 900 hospital partners across 46 states. Crothall has been recognized as one of Modern Healthcare’s Best Places to Work and Best Places to Work in Pennsylvania since 2013. Crothall has more than 32,000 team members, with core services include: Environmental Services, Patient Transportation, Patient Observation, Healthcare Facilities Management, Sterile Processing Services, and Ambulatory EVS. Learn more at . Job Summary This position will offer a $10k Sign On Bonus and relocation assistance Working as a Director of Environmental Services, you are responsible for directing and leading all aspects of the operational needs of the Housekeeping Department. You will coordinate the tasks of the Assistant Directors and Operations Managers. You will serve as a liaison between administration and hospital departments. Key Responsibilities: • Responsible for department’s financial data and statistics, • Monitoring of unit expenditures, • Develops and recommends department operating budget and ensure the department operates within budget, • Coordinates housekeeping activities with other departments, • Actively communicates with administration and other hospital departments, • Plans, prioritizes, directs, coordinates, and supervises functions and activities of the department, • Establishes work standards and work flow, • Establishes and implements policies and procedures for departmental operations, • Encourages and mentors staff creativity and innovation, • Ensures compliance with all regulatory agencies, • Proactive in the achievement of the facility goals and objectives, • Demonstrates quality leadership in meeting performance plans, • Reads, develops, and coordinates Total Quality Management process, • Develops and maintains job descriptions for department staff, • Four year college degree and equal related experience required, • Five years of housekeeping management experience at a healthcare account required, • Ability to analyze and interpret financial and other data+, • Experience working in a union environment, • General business acuity, • Excellent interpersonal skills, • High customer service and quality demeanor, • Ability to work under pressure and meet established criteria, • Public speaking skills, • Ability to apply a participative approach to leading staff, to coordinate and prioritize tasks, and to develop budgets with a complete understanding of facility needs and requirements, • Excellent stress management skills, administrative and organizational, and follow-through (with associates and clients) skills required, • Proficient in the use of Windows based office software including but not limited to Microsoft Office, Word, Excel, PowerPoint and Outlook Apply to Crothall today! Crothall is a member of Compass Group USA Click here to Learn More about the Compass Story Associates at Crothall are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Flexible Time Off, • Holiday Time Off (varies by site/state), • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs), • Paid Parental Leave Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. We encourage applicants with a criminal history (and driving history) to apply. Certain positions may require Florida Level 2 background screening. Details: Applications are accepted on an ongoing basis. Crothall maintains a drug-free workplace. Req ID: 1520610 Crothall Healthcare ASHLEY VAVROCK [[req_classification]]

Job Description Salary: $75,000- $80,000/yr Other Forms of Compensation: Pay Grade: 13 Crothall Healthcare, a Compass Healthcare company, provides specialized, high-quality, innovative, and responsive support services exclusively to the healthcare industry. Crothall serves many of the Top 100 Hospitals throughout its over 900 hospital partners across 46 states. Crothall has been recognized as one of Modern Healthcare’s Best Places to Work and Best Places to Work in Pennsylvania since 2013. Crothall has more than 32,000 team members, with core services include: Environmental Services, Patient Transportation, Patient Observation, Healthcare Facilities Management, Sterile Processing Services, and Ambulatory EVS. Learn more at . Job Summary Job Summary: Working as the System Patient Experience Manager, you are responsible for managing, coordinating, and directing all patient experience activities in collaboration with unit leadership in order to improve patient satisfaction scores including management of other Patient Experience Managers. Key Responsibilities: Tracks financial incentives, penalties, and reporting as tied to patient satisfaction performance for respective unit Maintains and supports client satisfaction at a level that ensures account retention Administers required client/customer surveys and responds in a timely and effective manner Monitors and ensures compliance, progression, and follow-up of any patient satisfaction initiatives Assists in developing, customizing, and/or monitoring a department/unit patient satisfaction action plan to meet each account’s needs Participates and adds value to hospital committees as necessary (i.e. Patient Satisfaction Committee, Nursing, Administration, HCAHPS Committee, etc.) Ensures compliance with all regulatory agencies (CMS, JCAHO) Increases regional patient satisfaction performance by promoting and monitoring patient satisfaction progress and exploiting marketing success Maintains an awareness of the patient satisfaction updates and industry conditions including internal and external to the accounts and districts Works closely with on-site management team to reach operational goals Participates on monthly conference calls with fellow Patient Experience Managers and operations management to communicate patient experience updates, current trends, and identify opportunities to reward and recognize Participates in all PE Department learning sessions including monthly educational webinars Provides recognition for employee when programs are implemented with success Prepares and implements development and training plans for patient satisfaction success Composes patient satisfaction reports as needed to management Preferred Qualifications: HS diploma/GED or equivalent combination of education and experience; 4 year degree preferred 2-3 years in-servicing experience in customer service training Hospitality and healthcare experience preferred 3-4 years experience in service-oriented operations Good coaching and on the job training skills required Excellent organizational skills and ability to multi-task essential Proficient in the use of Windows based office software including but not limited to Microsoft Office, Word, Excel, PowerPoint and Outlook Exhibits initiative, responsibility, flexibility and leadership Possesses a thorough knowledge of contract administration and office procedures Fiscal and budgetary skills Apply to Crothall today! Crothall is a member of Compass Group USA Click here to Learn More about the Compass Story Associates at Crothall are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Flexible Time Off, • Holiday Time Off (varies by site/state), • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs), • Paid Parental Leave Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. We encourage applicants with a criminal history (and driving history) to apply. Applications are accepted on an ongoing basis. Crothall maintains a drug-free workplace. Req ID: 1499466 Crothall Healthcare ASHLEY VAVROCK [[req_classification]]

Job DescriptionCanacre’s core services focus on leadership in Environment and Land services throughout the project lifecycle. At Canacre, we emphasize continuous development and growth. Our commitment to investing in industry knowledge and the expertise of our teams sets us apart. Our goals are to provide technical leadership for greater regulatory understanding and certainty and to build collaborative relationships with stakeholders, mitigating tomorrow’s environment, land and right-of-way risks today. At Canacre, we act with honesty and integrity within a culture where trust, collaboration, and teamwork flourish. We commit to diversity, inclusivity and the celebration of successes. Our vision is to foster an environment that promotes inspired and empowered team members who make an impact. The Environmental Monitor - Certified Professional in Erosion Sediment Control (CPESC) will monitor and report on construction-related activities with respect to the general permit requirements of the applicable regulatory agency, the client, and other cooperating/permitting agencies. The role will have a strong focus on monitoring and inspection of Erosion and Sediment Controls (ESC) and the ideal candidate will hold a CPESC designation. In addition to monitoring ESC, the CPESC will monitor and report on construction-related activities in areas of pre-determined biological, cultural, and paleontological sensitive resources. The CPESC will also be responsible for inspecting construction sites to ensure compliance with project-specific Stormwater Pollution Prevention Plans (SWPPP) under the Clean Water Act, as well as compliance with erosion control regulations and applicable environmental regulations and permits. Upon completion of construction activities, the CPESC will monitor the implementation of the appropriate restoration treatments. DUTIES AND RESPONSIBILITIES: • Conduct daily inspection of construction activities for compliance with applicable project approvals, permits (federal, state, and local), and landowner agreements, for the construction of the Project, • Developing site-specific SWPPPs and providing recommendations for the implementation of appropriate Best Management Practices (BMPs), • Oversee implementation of mitigation measures and monitor construction activities within specific areas requiring protection or environmentally sensitive areas, • Conduct regular inspections of a variety of construction sites to identify potential environmental hazards and ensure compliance with SWPPP and other relevant regulations, • Monitor and report general environmental compliance by the Construction Contractor(s) and subcontractors to client, with particular attention to fire, dust, hazardous materials, erosion control, and restoration guidelines, • Locate and facilitate protection and/or avoidance of environmentally sensitive resources such as migratory bird and raptor nests, rare plants and noxious weeds, watercourses, wetlands, high sensitivity paleontological resource, and cultural resources, • Identify sensitive resources and areas of concern prior to upcoming construction activities, and coordinating with construction personnel to discuss, • Act as a resource to construction personnel to explain environmental regulations and relevant application to construction activity, • Verify that construction work areas, access roads, and environmentally sensitive features have been properly marked and flagged before work is initiated in the area, • Ensure that erosion control or other best management practices do not inadvertently cause impact to other sensitive resources, • Act as a point of contact for onsite government agency inspectors, • Inform the Construction Contractor(s) of all potential and existing compliance issues, and coordinate with the Project team to determine appropriate corrective actions, • Coordinate with the Project team for potential stop-work when construction activities violate the conditions of the project approval(s), permits, or landowner conditions, • Identify, document, and oversee corrective actions to resolve non-compliance issues, • Document the resolution of any compliance issues in daily reports, • Maintain and submit daily reports and logs to the Project Team that document construction activities and associated compliance status for that dayOther duties as required QUALIFICIATIONS: • Post-secondary degree in Environmental Science or related field of study, • CPESC Designation or completion of the NYS Erosion and Sediment Control Certificate Program (NYSESCCP), • Minimum 5 years’ professional experience in Environmental Management, compliance, SWPPP inspection and mitigation planning, • Strong knowledge of ESC best practices in construction, • Strong working knowledge of environmental legislation and regulations, • Experience related to transmission line construction would be an asset, • Strong verbal and written communication skills – data collection and interpretation, technical report writing, regulatory permit applications, client communications, etc., • Excellent interpersonal and communications skills, • Strong analytical, problem-solving skills, prioritizing and decision-making skills, • Excellent attention to detail, • Ability to interface successfully with multiple departments, external vendors and/or customers, • Ability to manage multiple responsibilities simultaneously with minimal supervision, • Detail-oriented, self-motivated and highly organized with strong problem-solving skills, • Ability to build strong, lasting relationships with key stakeholders, • Excellent written and verbal communication skills, • Working knowledge of Microsoft Office, • Valid Driver’s License, with ability to maintain insurability under the company’s insurance carrier At Canacre, we are committed to upholding the highest standards of employment practices in each jurisdiction we operate in. We ensure that all employees are fairly compensated for their work, in accordance with the provisions outlined by the Fair Labor Standards Act (FLSA) and provincial employment standards legislation. Canacre is an equal opportunity employer, committed to a diverse workforce. Canacre complies with federal and state/provincial law governing non-discrimination in employment practices. Powered by JazzHR vDVkVZk2z9

Job Description CDL Driver/Equipment Operator Momentum Environmental provides industrial cleaning, waste management, emergency response and remediation services in the northeastern US and services a repeat blue chip customer base. The CDL Driver/Equipment Operator (Operator) drives or operates vocational, rolling stock equipment as part of field service crews at customer locations. The Operator is often the site leader on specific crews and works closely with operational leadership. The Operator reports to the Director of Operations and is responsible for a wide variety of technical, safety and operational responsibilities in support of the safe and profitable execution of environmental, industrial, and waste services. Essential Responsibilities • Plays an active role in the Company’s Health and Safety system including safety planning, toolbox safety talks, near miss reporting and hazard communication, • Safely drives and operates a wide variety of rolling stock and yellow iron equipment including commercial and vocational equipment such as hydro excavation trucks, vacuum trucks, dump trucks, road tractors, roll off trucks, off road vehicles and other equipment., • Provides field leadership, technical expertise and support on field service projects with respect to equipment operation and supports the scope, schedule budget of all assigned projects., • Participates in emergency response engagements by being a part of on call service rotations., • Works directly with Directors, Project Managers and Supervisors to ensure field crews are properly equipped and positioned for success., • Communicates regularly with other operational colleagues on technical and quality control elements of service engagements as well as dynamic schedules., • Supports the logical efforts of the Company while managing company level functions related to labor, internal equipment, rental equipment, specialty materials, and waste processing throughout the company’s service territory. Core Competencies • A CDL B license with tanker endorsement. CDL A and HAZMAT endorsements a plus, • At least 3 years of experience operating hydro excavation units, • At least 5 years of CDL operating experience, • Understanding of OSHA, RCRA, and DOT regulations as they relate to field services., • High emotional intelligence and ability to develop relationships/ trust with team members, • Strong verbal communication skills, • Ability to effectively interact with management, other departments, and vendors., • When working at a customer site or in a field environment, as appropriate, the ability to wear any of the following personal protective equipment (PPE) required:, • Steel toe boots, • Eye protection, • Hearing protection, • Gloves/ Hand protection, • Fire resistant uniform While performing essential duties of this position an individual regularly works in a variety of environments, and is required to see, talk, hear, reach with hands, stand, walk, drive frequently, use a computer keyboard, mouse, telephone, and other office equipment. Essential duties require bending, squatting and twisting frequently. The employee will frequently be exposed to dirt, dust and fumes. Noise levels of the typical work environment is generally moderate but may vary depending on customer site visits. The employee will occasionally be required to lift/move up to 75 lbs.

Job DescriptionDescription: Technical Manager-HV Substations Lead the delivery of high-impact HV substation engineering that powers the future of energy. As the Technical Manager-HV Substations, you will serve as Fisher’s senior technical authority for HV substation design and engineering, including transmission interconnections, collector switchyards, POI substations, and generator tie systems for renewable and conventional energy clients. In this role, you’ll provide leadership across substation physical design, electrical systems, grounding, protection & controls, and system study coordination, ensuring quality, QA/QC, and compliance at every phase. You’ll mentor engineering staff, partner with Project Managers, support proposals, and shape technical standards and best practices across the firm. Projects span 30%, 60%, and IFC design through construction and commissioning, giving you full end-to-end influence on critical infrastructure. If you’re ready to lead complex HV substation engineering projects, elevate technical teams, and drive grid reliability across renewable and utility-scale energy, apply today and join Fisher Associates. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Technical Manager-HV Substations • Lead HV substation engineering (69 kV–345 kV+) for transmission, interconnection, and utility projects, • Serve as senior technical authority for HV substation design and engineering, • Oversee QA/QC for drawings, calculations, studies, and IFC packages, • Design and review substation layouts, electrical schematics, grounding, conduit routing, lightning protection, and P&C interfaces, • Perform and review power system studies including load flow, short circuit, grounding, protection coordination, arc flash, insulation coordination, voltage drop, and ampacity, • Ensure compliance with NEC, NESC, IEEE, ANSI, NFPA, NERC, utility standards, and permitting requirements, • Interface with utilities and ISOs on interconnection requirements, SCADA/telecom integration, protection philosophies, energization, and commissioning, • Mentor and train engineers and designers, ensuring technical accuracy and quality deliverables, • Support proposal development with scopes, assumptions, and cost estimates, • Support construction and field engineering, including site visits and as-built documentation, • Bachelor’s degree in Electrical or Mechanical Engineering, • 15+ years of substation engineering design experience, • Active Professional Engineer (PE) license required, • Experience with renewable power plants, EPC projects, and utility-scale infrastructure preferred, • Strong background in renewable interconnection, transmission, and utility coordination, • Expertise in power system studies, including short circuit, load flow, grounding, protection coordination, arc flash, cable sizing/ampacity, trenching/cabling, equipment sizing, and lightning/lighting studies, • Ability to develop and interpret SLDs, 3-line diagrams, wiring diagrams, schematics, and substation layouts, • Proficient in AutoCAD, Civil 3D, ETAP, SKM, CYMCAP, • Strong knowledge of IEEE, NESC, NEC, NFPA, ANSI, NERC, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions, • You are empowered to deliver results through collaboration, trust, and ownership., • Your voice matters shaping decisions in an inclusive and transparent culture., • Your growth as a leader is a priority, supported by clear career paths and continuous learning., • You thrive in a positive culture that celebrates wins and keeps work fun and enjoyable., • Your leadership journey focuses on developing, coaching, and empowering high-performing teams. Your Impact Matters, Your Career Thrives. Work on engaging projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law. #LI-Hybrid

Job Description Whitestone Associates, Inc., a 100% employee-owned company and leading provider of environmental and geotechnical engineering and consulting services throughout the eastern US, is currently recruiting for a Steel Inspector to join our team. This is a tremendous opportunity for experienced candidates to join and contribute to the growth of a 100% employee-owned engineering firm. Salary commensurate with experience. We are seeking an experienced Steel Inspector to perform construction phase testing and inspection of structural steel and welding at various client sites throughout the region. The ideal candidate will have 3-10 years of experience in structural steel inspection and welding inspection. Location: Buffalo, NY Responsibilities: • Conduct construction phase testing and inspection of structural steel and welding at various client sites;, • Perform non-destructive testing utilizing Ultrasonic Testing methods;, • Inspect timber framing installations;, • Assist with other special inspections as needed; and, • Travel to project sites as required. Requirements: • American Welding Society - Certified Welding Inspector (CWI) certification required;, • Non-destructive testing proficiency in Ultrasonic Testing (UT) required;, • Timber framing inspection experience;, • Proficient in Microsoft Office suite;, • Comfortable working at heights;, • Ability to work independently with minimal supervision; and, • Valid driver's license and willingness to travel. Preferred Qualifications: • Prior experience with geotechnical and/or environmental field investigation;, • Prior experience with structural steel construction and fabrication;, • ICC Bolting/Welding Certification, • UT Inspector Certification, • Engineer in Training (EIT) certification; and, • ACI, AASHTO, or ICC certifications. Benefits: • The estimated range for this position is $28/hr to $37/hr, • Whitestone's Employee Stock Ownership Program (offered at no cost to each eligible employee), • Medical Insurance, • Dental Insurance, • Health & Dependent Care Flexible Spending Accounts, • Traditional & Roth 401K Plans with Company Match, • Long Term & Short Term Disability Insurance, • Company-Sponsored Life & AD&D Insurance, • Multiple AFLAC Insurance Products, • Pet Insurance, • Identity Theft Protection, • Multiple Corporate Discount Programs

Job DescriptionCompany Description About Veolia North America A subsidiary of Veolia Group, Veolia North America (VNA) offers a full spectrum of water, waste and energy management services, including water, and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has approximately 10,000 employees working at more than 350 locations across the continent. Please visit our website . Job Description Position Purpose: Provides day-to-day monitoring of utility plant operations, lab tests and corrective, predictive and preventative maintenance activities. Primary Duties/Responsibilities: • Operates equipment manually and through instrumentation panels, computer terminals and programmable logic control units following process control procedures. Monitors and observes operating conditions, records observations and data in shift log. Diagnoses basic operational problems and takes corrective action per procedure., • Performs CLAIR (cleaning, lubrication, adjustment, inspection and minor repair) on machines and related equipment which may include pumps, valves, gates, mixers, conveyors, compressors, dryers, chemical feed, boilers, and chillers. Reports and documents results of work performed and enters into appropriate database., • Promptly reports any operational problems with machines or equipment to Lead Supervisor / Asset Manager / Project Manager., • Troubleshoots mechanical, hydraulic or pneumatic equipment to determine repairs needed. Dismantles equipment to gain access to and repairs defective parts using hand tools, power tools and precision measuring and testing devices. Re-assembles and tests equipment ensuring safe and efficient operating condition is restored., • Collects water and wastewater samples according to schedule. Performs field tests in order to pace chemical dosages for process and odor control units. Prepares chemical solutions, monitors supplies and recommends reorder., • Performs lab tests and prepares reports per procedure. Analyzes parameters including pH, alkalinity, chlorine residuals and other tests as required., • Performs maintenance on lab and field equipment and instrumentation including pH meters, specific ion meters., • Changes and cleans probes, magnetic strips, floats and sensors on instrumentation., • Performs instrument calibration, including resetting of set points as assigned., • Performs facility maintenance and repair and may replace or install light bulbs, florescent tubes, and paint., • Performs manual labor including cleaning equipment, facilities and grounds as required and properly disposes of waste according to safety and environmental policies., • Spends 100% of time in operations / light maintenance environment., • Typically spends 5 – 10% of time exposed to outdoor and sometimes inclement weather., • Required to work on rotating 7/24 shift schedule., • Possible Work Hazards: May be exposed to possible operations hazards including fumes, dust, toxic and caustic chemicals, noise, rotating machinery, high pressure and hot and cold temperatures, slippery surfaces, water and electrical hazards. Qualifications Education/Experience/Background: • High school or GED with the ability to read, write and comprehend English (operational, process, safety and quality instructions) and be able to carry out verbal and written instructions., • Ability to perform basic mathematical calculations., • Must demonstrate proficiency in the care and use of all site specific, facility required PPE (Personal Protection Equipment), including respirators, etc., • Must consistently demonstrate the ability to perform all assigned tasks in an accurate and timely manner., • Must demonstrate ability to efficiently operate and perform minor PM’s on a variety of equipment which may include pumps, valves, mixers, chemical feed equipment, boilers, compressors, and chillers., • Knowledge of HOA (Hand – Off – Auto) operational controls and how settings apply to operational control scheme., • Must have the ability to diagnose mechanical and process problems in multiple unit processes, troubleshoot mechanical, electro-mechanical, hydraulic or pneumatic equipment and take corrective action within policy and procedure limitations., • Good verbal and written communication skills are necessary., • Must be able to work a 12-hour shift rotation, 7/24 shift schedule (Dupont Schedule). Must be able to cover OT shifts as required., • Some vocational training and mechanical aptitude required, with the ability to read, interpret and record data from meters, gauges, scales, panels, computer consoles and other equipment., • Must have or be able to obtain a Class 2 New York Boiler License as required by regulatory agency at site within 6 months of start date., • Works in various positions; works on ladders, catwalks, and supports at heights of 30 feet above the ground; and works with hands extended above and below head and body up to 40 minutes using hand tools weighing up to 15 pounds., • Must be able to lift and carry 50 pounds (occasionally 60 pounds) distances of 50 feet., • Occasional stooping, bending or kneeling and entering confined spaces., • Required to turn valve handles and wheels on valves., • Required to use shovels for snow removal or material transfer. Must be able safely drive a powered industrial forklift. Additional Information Pay Range: $28.00 to $33.00 per hour. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description Hotel Equities, a multi-award-winning hotel development and hospitality management company, is currently searching for a remarkable Front Desk Clerk/Night Audit for the Richardson Hotel, Buffalo NY. This position will work 2 night audit shifts and flexible to other shifts. Opera Cloud experience is preferred. Job Purpose: Responds in a professional and courteous manner to arriving, departing and in-house guests by providing accurate and timely information and services. Responds to telephone and in-person inquiries regarding reservations, hotel information and guest concerns. Warm, knowledgeable service and helpful guidance reassure guests they’ve made the right choice to stay with us. • Greet and welcome guests upon arrival. Register guests into the computer, verifying reservation, address, and credit information. Promote “preferred” guest program and provide recognition and benefits to all current members., • Accept payment for guests’ accounts both at the time of registration and at checkout. Maintain a house bank and make a deposit and accurate report of receipts daily. Cash checks and exchange currency for guests, • Issue key to and control entrance of safety deposit boxes. Post miscellaneous charges as requested., • Promptly respond to and resolve guest complaints, • Answer telephone promptly and properly being polite, courteous, and friendly, • Be friendly, thorough, accurate and efficient in taking reservations, • Be friendly, thorough, accurate and efficient in performing Check-ins, • Be friendly, thorough, accurate and efficient in performing Check-outs Greet and seat all guests and ensure a quality dining experience. Warm, knowledgeable service and helpful guidance reassure guests they’ve made the right choice to stay with us. • Responsible for greeting every guest with a smile and positive attitude., • Ensures that all guests are dealt with in a professional, consistent manner. Ability to diplomatically handle difficult situations and people., • Provide a safe working environment by ensuring compliance with safety programs, Health Department requirements, and job safety analysis., • Maintain and enforce sanitation laws and safety standards with anyone entering the kitchen and restaurant area., • Assist guests with luggage upon their arrival to and departure from the hotel, • Use the guests’ names, • Be knowledgeable and helpful about the local area, the hotel and hotel services, • Handle messages, wake-up calls, mail, and faxes properly, • Assist guests’ with laundry/dry cleaning needs, • Know of incoming VIPs, • Follow all applicable Company Standard Operating Procedures., • Perform other assignments as directed by the General Manger., • Be an enthusiastic, helpful and positive member of the team, • Be professional, responsible and mature in conduct and behavior, • Be understanding of, encouraging to and friendly with all co-workers, • Be self-motivated and use time wisely, • Maintain open line of communications with each department, • Communicate pertinent information, • Respond positively to new ideas, • Openly accept critical/developmental feedback, • Maintain effective communication through the use of meetings, log books and bulletins, • Be available to help other departments in emergency situations, • Adhere to all work rules, procedures and policies established by the company including, but not, • limited to those contained in the associate handbook., • Safety and Security Skills, • Properly handle and account for keys, • Be knowledgeable of policies regarding emergency procedures and security concerns, • Aggressively seek and react to opportunities to sell rooms, including re-rents, and last rooms available, • Have complete knowledge of hotel rooms, function space, restaurant (if applicable), other outlets, and services; have in depth knowledge of and regularly re-stock and sell pantry items, • Increases revenues by offering customers upgraded rooms and promoting hotel amenities and outlets, • Have full understanding of franchise honors program, • Ensure all customers establish credit upon check-in. Improves timeliness of cash flow by adhering to all established credit and inventory control procedures:, • Verifies all information on reservations check-in; name, address, method of payment, etc., • Retrieves proper name and address verification and proper approval codes for cash and credit card paying customers, • Identifies and records special billing instructions and notifies accounting, • Completes shift closing accurately by getting appropriate approval signatures and authorization codes, • Adheres to hotel policies regarding the use of cash banks, • Stays current with developments in the hotel by reviewing the communication log book each shift; updates log book for next shift, • Report potential sales contacts to the sales department protection of guests’ room numbers. Qualifications and Requirements: High School diploma /Secondary qualification or equivalent. Experience with Marriott, Hilton, IHG, Wyndham or Hyatt processes and standards. This job requires the ability to perform the following: • Must be able to speak, read, write and understand the primary language(s) used in the workplace., • Must be able to read and write to facilitate the communication process., • Requires good communication skills, both verbal and written., • Must possess basic computational ability., • Must possess basic computer skills., • Extensive knowledge of the hotel, its services and facilities; General knowledge of the city where hotel is located and its attractions., • Must be able to stand and exert well-paced mobility for up to 4 hours in length. Length of time of these tasks may vary from day to day and task to task., • Must be able to exert well-paced ability to reach other departments of the hotel on a timely basis., • Must be able to lift up to 20 lbs occasionally., • Talking and hearing occur continuously in the process of communicating with guests, supervisors and subordinates, • Vision occurs continuously with the most common visual functions being those of near vision and depth perception., • Ability to spend extended lengths of time viewing a computer screen., • Requires manual dexterity to use and operate all necessary equipment., • Must have finger dexterity to be able to operate office equipment Other: • Being passionate about people and service., • Strong communication skills are essential when interacting with guests and employees., • Reading and writing abilities are used often when completing paperwork, logging issues/complaints/requests/ information updates, etc., • Basic math skills are used frequently when handling cash or credit., • Problem-solving, reasoning, motivating, and training abilities are often used., • Have the ability to work a flexible schedule including nights, weekends and/or holidays Amazing Benefits At A Glance: • Hourly rate of pay between $20-$22 based on experience and qualifications, • Team Driven and Values Based Culture, • Same-day pay available, • Employee Assistance Program, • Career Growth Opportunities/ Manager Training Program, • Reduced Room Rates throughout the portfolio, • Third Party Perks (Movie Tickets, Attractions, Other), • Employee discount, • Flexible schedule, • Parental leave, • Referral program

Is the air we breathe clean? Is the water contaminated? How will temperature and moisture levels affect the growth of toxic molds? It is for these reasons, along with myriad others, that the Army National Guard needs Environmental Scientists to join our team of Medical Corps Officers. As an Environm

We're currently looking for individuals across the country to take part in remote paid research, including remote focus groups, product trials, and consumer studies.Earn up to $750 a week in your free time by providing feedback on everyday products and services.If you're comfortable sharing your opi

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies.We guarantee 15-25 hours per week with an hourly pay of between $25 / hr.There is no payment required in order to apply or to work as an In-Home Usage Tester.You

We're currently looking for individuals across the country to take part in remote paid market research, including online focus groups, product trials, and consumer studies.Earn up to $750 a week in your free time by providing feedback on everyday products and services.If you're comfortable sharing y

Job Title: Salesforce Project Manager.Location: NY/NJ (Hybrid – 3 days/week).Seeking a Senior Project Manager to lead Salesforce B2B delivery projects, managing end-to-end execution, stakeholders, and cross-functional teams.Manage multiple Salesforce projects (scope, timeline, budget).Drive projec

Call Center / Remote] - Anywhere in U.Competitive pay / Medical, dental & vision / 401k / PTO - As a Customer Service Rep at Planet Home Lending, you will: Respond to borrower inbound calls concerning their account, ensuring high quality service and adhering to productivity and regulatory requiremen

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Administrative Assistant admin experience not required.Remote Work From Home Administrative Assistant Admin - Part Time Market Research Panelists

This role requires the ability to work lawfully in the U.Imagine making a real difference for customers by guiding them through Spectrum's Community Solutions products and services.If you thrive on solving problems and enjoy helping others, this customer service role offers an opportunity to build l