Environmental technician jobs in Hoboken, New JerseyCreate job alerts

The CSC ServiceWorks Story: We’re the leading provider of commercial laundry services, consumer services technology, and air-vending and EV solutions throughout the United States and Canada. Our Best-in-Class team of 2,500 dedicated professionals’ benefit from work that’s steady (but never boring), time to enjoy what matters, appreciation and rewards in return for hard work and accountability, and support in growing a fulfilling career. Overview: Appliance Delivery Driver and Installation Technician This is no desk job. As an Appliance Delivery Driver and Installation Technician your days will be active, delivering and installing commercial laundry and/or air vending equipment to a variety of places around town. You’ll have a constant change of scenery, engage with clients and consumers daily, and learn new technology in an environment that supports your success in both your career and life. Installation Technicians’ work is typically Monday through Friday. A Day in the Life of an Installation Technician: • Deliver and Install laundry or air equipment to customer's homes and client locations, • Deliver and Install ancillary technology (card readers, digital enhancements), • Drive a box truck to deliver, pick up, or repair/replace washers, dryers and/or air machines, • Prepare equipment for delivery (assemble required parts prior to loading on trucks), • Instruct customers and/or clients how to operate equipment in a safe and effective manner, • Staying physically active loading and unloading your company truck using a 2-wheeled hand cart for support, ease and safety. Benefits & Perks:, • Work Life Balance!, • Medical, Dental, and Vision insurance, • 401k, • Vacation, Sick Time & Holiday Pay What we’re looking for: • High School diploma or equivalent, • Valid Driver's License, • Must be 21 years of age or older, • Basic Plumbing and Electrical knowledge, • Ability to pass pre-employment screening, • DOT Certification is a plus!, • 1 year of job-related experience in the areas of delivery and installation (preferred) training is provided, • Mechanical & Maintenance Experience/Knowledge, • Experience driving box trucks, • Ability to lift up to 100lbs in a variety of environmental conditions (both weather and non-weather related), • Knowledge with computers and smart phone technology, • Troubleshooting, • Route Driving Experience a plus!, • Customer Service CSC ServiceWorks is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, veteran or other protected status. CSC Service Works will comply with local and state laws regarding minimum wages, including requirements specific to cities, counties, and municipalities.

Job Description First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. At First Student, our Trainers are a constant reflection of our companys commitment to safety and customer service. The Trainer is responsible for training employees and educating about safety and compliance regulations. At First Student, we are proud to offer: $28/hr Tremendous Career Advancement Opportunities due to a strong presence across North America Positive and rewarding work environment Trainer Responsibilities: Provides classroom and/or behind-the-wheel training to new operators or re-training of current operators Provides training to location personnel Tracks attendees and maintains training documentation based on regulations and company policy Safety responsibilities such as accident investigation, compliance forms, and safety meetings Trainer Required Experience and Skills: High school diploma or equivalent 1-3 years training experience 1-3 years of transportation, safety, or related experience Knowledge of federal and state rules and regulations regarding safety and environmental issues Computer literacy with Microsoft Word, Excel, and PowerPoint Consistent attendance and punctuality Possess working vehicle to travel within service area as needed Subject to DOT drug testing and physical. DOT Regulation 49 CFR Part 40 does not authorize the use of Schedule I drugs, including marijuana, for any reason. First Students commitment to putting our customers first, dedication to safety, and an ambition to deliver dependable transportation makes for a working environment youll love. Apply today to join our team! We aspire to have a culture where all people are First. We strive to attract and retain a diverse workforce therefore all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. For candidates applying to positions in San Francisco or Los Angeles California, First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance or Los Angeles Fair Chance Ordinance. First is an equal opportunity employer and by doing so we will sustain and promote an inclusive culture that supports future growth for all." In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request .

Job Description Maintenance Technician 2 Location: 151 Lawrence Street, Brooklyn, NY 11201 Ability to travel between program sites across Brooklyn required. Schedule: Full-time, 35 hours per week Monday - Friday - Ability to work flexible schedule and overtime as needed – including some early mornings, evenings, and weekends Salary Range: $22.00/hour - $22.00/hour Annualized to $40,040/year FLSA STATUS: Non-Exempt Benefits: This position is eligible to participate in BCS's generous paid time off and benefits package including health insurance, dental, vision, tax free flexible spending accounts, 403(b), and eligibility for the public service loan forgiveness program About BCS Brooklyn Community Services (BCS) partners with members of the Brooklyn community to overcome obstacles on their pathway toward self-determination. Since 1866, founded on the principle of neighbors helping neighbors, BCS has worked in neighborhoods impacted by systemic poverty. Today, we continue to support the strengthening of communities by fostering the educational success of children, the leadership development of youth, the employment and housing stability of adults, the advancement of individuals living with disabilities, and the empowerment of seniors and families. Through 42 programs at 28 locations, and over 400 staff, Brooklyn Community Services serves more than 20,000 people each year. Position Summary The Maintenance Technician 2 may be assigned to different sites as required by the program needs. Responsible for the general safety conditions of the assigned facility. Ensure cleanliness and maintain building(s) in good condition and repair to ensure the safety and comfort of the staff and clients and protect the Program’s physical facility. Ensures compliance with regulatory environmental standards. Performs minor construction projects consisting of HVAC, plumbing, electrical and carpentry work. Makes routine rounds, performs tests and equipment readings. Performs diagnostic testing and repairs equipment and systems (i.e., HVAC, electrical systems). Performs exterior grounds maintenance. Essential Duties: • Monitor the Facility’s interior and exterior entrances for cleanliness (including snow removal and removal of other hazardous conditions)., • Complete Work Orders assigned in an efficient and proficient manner., • Assist in safety and evacuation drills, procedures and training., • Alert the direct supervisor, Asst. Director, Director or designee, of any unusual occurrences or violation of rules and regulations (i.e., no smoking regulations)., • Perform preventative maintenance as scheduled, and maintains log-books accurately and completely in accordance with policies, procedures, and statutory guidelines, • Attend in-service training, seminars, and other educational activities as required, • Perform semi-skilled duties in the construction, alteration, maintenance, and repair on buildings, and mechanical and electrical systems equipment,, • Provide on-call maintenance coverage, when assigned, • Make routine rounds, performs tests and equipment reading, • Repair minor electrical malfunctions and helps install new equipment, • Assemble, install, and repair pipes, fittings, and fixtures of water systems, and unclog clogged drains, • Build, alter, repair, and maintain buildings, floors, partitions, windows, doors, screens, wood fixtures, and furniture, • Check functionality of safety systems (fire alarms, carbon monoxide detectors, etc., • Troubleshoot and perform repairs including, but not limited to:, • Painting, patching, and sheet rock repair and installation, plaster repair,• Light plumbing including unclogging drains and basic plumbing repairs, • Light electrical (from the wall out) including replacing fixtures and lighting ballast, • Lighting in general including bulb and switch plate replacement, • Lock repair and replacement, • Floor tile repair and installation including base, • General carpentry including interior renovation, ductwork, • HVAC system cleaning, filter and belt changes, • Prepare maintenance reports, recommend and perform basic corrective maintenance as required, • Perform general repair work involving rough carpentry and painting tasks, • Monitor heating and air conditioning systems, including logging and reporting problems and potential issues. Emphasis on preventative maintenance., • Move and relocate furniture, computers, office supplies, etc. as needed., • Attend training programs and meetings as instructed., • Perform other related tasks as assigned. Qualifications • High school graduate or GED certification, • Minimum 3-5 years experience in the maintenance field, • DRIVERS LICENSE Required – Clean Driving record - upon hire and pass a motor vehicle history check demonstrating a safe driving history., • Must pass OCFS, OPWDD and OMH Background checks., • Proficiency in operating, maintaining and repairing hand, mechanical and power tools and equipment such as power saws, power sanders, drills, air compressors, paint sprayers, generators, and various hand tools required for basic carpentry, plumbing, and maintenance., • Intermediate ability to read and interpret sketches, diagrams and blueprints., • Perform intermediate level plumbing work including the installation, repair and replacement of plumbing fixtures including sinks, toilets, faucets, water heaters and pipes; clear obstructions from water and sewer lines., • Perform intermediate carpentry work including the repair of stairs, joisting, walls, windows, siding, doors and other carpentry work., • Skilled appliance repair, • Intermediate knowledge of methods, practices and equipment used in facilities management and activities including a variety of building trades work., • Intermediate knowledge of theory of electricity., • Basic knowledge of City policies, procedures, regulations, and codes related to facility maintenance and repair., • Intermediate knowledge of occupational hazards and necessary precautions applicable to building and mechanical maintenance Preventive maintenance requirements work preferred., • Knowledge and implementation of safe work practices, • Thorough knowledge of Handyman Duties, basic plumbing, basic carpentry, basic electrical, building codes, ADA regulations, and safety standards., • Must be a self-starter and possess the ability to work well with others., • Ability to communicate effectively with staff, management and vendors, • Basic knowledge of Microsoft office and Google Suite, • Must successfully execute scope work, foster a positive work culture in accordance with BCS principles and guidelines., • Ability to perform physical tasks related to the position including lifting heavy objects up to 50 pounds, • Ability to lift up to 50 pounds above the waist and carry heavy objects, • Ability to walk up and down 8 flights of stairs, • Familiarity with best practices for basic maintenance and repairs and the ability to carry them out with limited supervision, • Must maintain professional appearance and interact with tenants and staff in a professional, patient, polite and respectful manner., • Must undergo pre-employment screenings such as the Criminal Background Check required by funder BCS is an Equal Opportunity Employer. Auxiliary aids and services are available upon request to individuals with disabilities

Job Description COME JOIN OUR TEAM! Titan Corp seeks maintenance technicians for growing property management company. Benefits include: Medical, Dental, Vision, 401K, and Paid Time off. The role of Maintenance Technician is to provide proper maintenance for the community, along with providing excellent customer service to all residents and prospects. Maintenance Technicians must wear complete uniform with I.D. badge when working on any Titan Corp. property at all times, including nights and weekends. Essential Duties include the following (other duties may be assigned): 1. Complete all service requests within 24 hours, unless it requires extraordinary parts or labor., 2. Keep maintenance shop in a clean and orderly manner., 3. Monitor and operate compactor., 4. Help maintain grounds and streets free of litter., 5. Keep uniform and personal appearance clean and neat., 6. Maintain all amenity areas., 7. Assist Community Director with unusual projects as necessary to maintain smooth property operation., 8. Maintain all project directional signs, making sure they are clean, painted, and straight., 9. Monitor recycling containers. Keep them clean and items separated., 10. Call Community Director or Maintenance Supervisor before you are going to be out of work for any reason., 11. Monitor guidelines for vacant, office, and common areas., 12. Responsible for checking and replacing any defective or burned out light bulbs or security lights. Light inspections to be done one or two times per week., 13. Serve maintenance "on call" as necessary., 14. Perform other duties as assigned by the Community Director and/or Maintenance Supervisor. While performing the above responsibilities and assignments, you may be required to perform tasks that will require a great amount of physical exertion. Listed below are common requirements for your duties as Maintenance Technician for Titan: · Use various hand tools and test equipment; these items may vary in weight from a few ounces to 40 pounds. · Use a 30-pound can of refrigerant for servicing of air-conditioners. · Hand-carry and use a 70-pound refrigerant recovery unit. · Hand-carry and install air-conditioning compressors weighing from 40 pounds to 120 pounds, depending upon the size of the condensing unit · Hand-carry and install air-conditioning condenser units weighing 100 to 250 pounds. · Hand-carry and install furnace / forced air unit weighing up to 90 pounds. · Hand-carry and install hot water heaters weighing between 70 and 90 pounds. · Hand-carry and install commode/closet combination weighing 40 to 50 pounds. · You will be required to climb ladders in order to clean leaves out of gutters and do roof repairs. Ladders required to perform this task will range from 16 to 40 feet in length and range in weight from 20 to 125 pounds. You will be required to lift and transport these ladders. · Make sure preventative maintenance is done on all weight room equipment. · Use of a ladder is required to change light bulbs in breezeways and on buildings. These ladders could range in weight from 10 to 125 pounds. · Changing panels of glass ranging in weight from 10 to 40 pounds is require and may require the use of a ladder to accomplish the task. · Pool maintenance is a big responsibility and often requires you to lift and / or transport 100-pound drums of granular chlorine, 50-pound drums of stick chlorine, and 50-pound bags of soda ash or bicarbonate of soda. You are responsible for replacing pool pump room motors and pumps. These pumps and motors could range from 25 to 200 pounds, depending on the size required. · As part of your daily maintenance routine, you may be required to move appliances from one apartment to another apartment on opposite ends of the community. The appliance may have to be transported by means of a hand truck up one to three flights of steps. These appliances will range in weight from 75 to over 200 pounds. · Our commercial laundry rooms are equipped with single washing machines and / or stacked (double) clothes dryers, which you will be required to move in order to repair and perform preventative maintenance. These machines range in weight from 120 to 150 pounds. · On occasion, you will be required to move furniture from one model unit to another or move furniture items in a resident's apartment to accomplish certain repairs or to correct flood damage. This would require that you move items weighing several pounds to several hundred pounds. · During the course of your job, you may be involved in repairs to the building structure. You may be required to move or transport a number of different building type materials weighing several pounds to several hundred pounds · At certain times you will be required to perform maintenance on special equipment (i.e., exercise equipment, gas grills, golf carts, car washes, amenity areas, and security gates). All of these functions require different physical exertion and their weight depends on the particular equipment (usually in excess of 100 pounds) · You will be required to perform certain resident service functions or make upgrades to the apartment. An example would be to install track lighting or ceiling fans. Both duties would require the work to be done using a stepladder and require lifting with two hands. In addition to the above, you will be required to lift and transport other items pertaining to maintenance (weighing up to 200 pounds) for the smooth operation of the property. Customer Service Responsibilities: · Communicate clearly to the residents, both verbally and in writing. · Read and / or listen to resident requests / concerns. · Receive resident concerns in a calm and open manner. Qualifications: Special Skills Required . Must be CMRT (Certified Maintenance and Reliability Technician) certified. Must be EPA (Environmental Protection Agency) certified. Must be CPO (Certified Pool Operator) certified. · Must have a sense of pride about a job well done, be courteous and tactful, and have a commitment to quality work. · Must be clean cut, neatly dressed, and wear the proper uniform each day. · Must have good character and background that can stand up under a thorough background check. · Must take and pass a drug-screening test. Must be able to pass an agility test. · Must be able to communicate to residents, both verbally and in writing, and receive residents' concerns in a calm and open manner. · Must have dependable transportation capable of carrying tools and parts to ensure an efficient use of time to provide proper building maintenance. · Must have a valid driver’s license. Knowledge · General property operations: · Safety · Heating and A/C · Plumbing · Pool Care · Electrical · Carpentry · Appliance / Equipment Repair · Wallpaper / Painting

Job Description Position: Maintenance Technician 1 Reports to: Maintenance Supervisor Location: 3rd Avenue Women's Shelter - 968 3rd Ave., Brooklyn NY, 11232 Schedule: Full-time, 35 hours per week Monday - Friday Ability to work flexible schedule and overtime as needed – including some early mornings, evenings, and weekends FLSA STATUS: Non-Exempt Salary Range: $19.00/hour - $20.00/hour About BCS Brooklyn Community Services (BCS) partners with members of the Brooklyn community to overcome obstacles on their pathway toward self-determination. Since 1866, founded on the principle of neighbors helping neighbors, BCS has worked in neighborhoods impacted by systemic poverty. Today, we continue to support the strengthening of communities by fostering the educational success of children, the leadership development of youth, the employment and housing stability of adults, the advancement of individuals living with disabilities, and the empowerment of seniors and families. Through 42 programs at 28 locations, and over 400 staff, Brooklyn Community Services serves more than 20,000 people each year. Position Summary The Maintenance Technician 1 is assigned to one site and is responsible for the general safety conditions of the assigned facility. Ensure cleanliness and maintain building(s) in good condition and repair to ensure the safety and comfort of the staff and clients and protect the Program’s physical facility. Ensures compliance with regulatory environmental standards. Performs minor construction projects consisting of HVAC, plumbing, electrical and carpentry work. Makes routine rounds, performs tests and equipment readings. Performs diagnostic testing and repairs equipment and systems (i.e., HVAC, electrical systems). Performs exterior grounds maintenance. Responsibilities: Performs duties under the general supervision of Maintenance Supervisor and Facilities Manager. Essential responsibilities and duties include, but are not limited to, the following: * Inspect property and buildings for life/safety issues and take immediate corrective action. * Identify building maintenance needs. * Maintain clean work area, vehicle and shop. * Establish and maintain professional and cooperative working relationships with those contacted in the course of work. * Process Work Orders in a timely fashion * Perform preventative maintenance on buildings by performing a variety of skilled carpentry, electrical, painting, plastering, dry walling, plumbing, heating, limited air conditioning and mechanical repair work, door hardware, keying, exit and emergency lighting. * Repair electrical lighting systems and fixtures. * Perform basic level plumbing work including the installation, repair and replacement of plumbing fixtures including sinks, toilets, faucets, water heaters and pipes; clear obstructions from water and sewer lines. * Assist in general repair work involving rough carpentry and painting tasks * Perform basic carpentry work including the repair of stairs, joisting, walls, windows, siding, doors and other carpentry work. * Inspect building facilities to identify building maintenance needs; complete inspection and preventive and report to Maintenance Supervisor * Prepare maintenance reports, recommend and perform basic corrective maintenance as required. * Install, maintain and repair a variety of floor coverings such as carpeting, tile, linoleum and wood; * Proficiency in operating, hand, mechanical and power tools and equipment * Perform basic maintenance and repairs of mechanical and power tools Qualifications: * High school graduate or GED certification * Three years’ experience in facilities maintenance. * Professional, courteous and friendly demeanor. * Ability to perform basic appliance repair. * Basic ability to read and interpret sketches, diagrams and blueprints. * Compassionate, patient, and empathetic approach when interacting with clients * Repair and maintain a variety of mechanical equipment. * Read and interpret sketches, drawings, diagrams and blueprints. * Lift up to 50 pounds above the waist and carry heavy objects * Use a personal computer and relevant computer software. * Operate with a high level of personal organization. * DRIVERS LICENSE Required – Clean Driving record upon hire and pass a motor vehicle history check demonstrating a safe driving history * Awareness of City policies, procedures, regulations, and codes related to facility maintenance and repair. * Basic knowledge of hazards and necessary precautions applicable to building and mechanical maintenance Preventive maintenance requirements work preferred. * Knowledge and implementation of safe work practices * Be a self–starter and work independently in the absence of supervision. BCS is an Equal Opportunity Employer. Auxiliary aids and services are available upon request to individuals with disabilities Benefits This position is eligible to participate in BCS's generous paid time off and benefits package including health insurance, dental, vision, tax free flexible spending accounts, 403(b), and eligibility for the public service loan forgiveness program

Job Description Nissan of the Bronx is looking for smart, engaging, creative and dynamic people who want to join a team where they matter. We are committed to an environment where the customer is always treated with respect and dignity. Our associates are our most valuable resource and growth is encouraged through diligence, teamwork & creativity. Above all, there is the highest standard of honesty and integrity when conducting business. Your professional development is one of our top priorities, we're proud to offer our staff members a comprehensive benefits package, competitive compensation plans, and abounding avenues to grow your career with us. If you have an interest in automotive, and a desire to develop a career in the industry, apply today! Responsibilities • Checks all fluids and maintenance-related parts and tops-off or replaces fluids or filters/parts as required, • Diagnoses issues based on experience, analysis, and testing, • Follows all shop policy, procedure, safety, and environmental rules, • Makes repair recommendations and manages delivery of repairs by setting and managing customer expectations, • Performs routine service inspections or tests and completes standard maintenance jobs, • Repairs automobiles and light trucks as assigned, • Attends all staff meetings, trainings, and educational classes as required, • Complies with and enforces all safety policies and procedures, • Follows all safety and security procedures, • High school diploma or GED preferred, • At least one year of relevant experience, • ASE certifications, • Certification as a state inspector a plus, • Unrestricted driver's license and clean driving record, • Neat, clean, and professional appearance, • Able to safely operate motor vehicles in tight and small spaces, • Broad scope of automotive mechanical/electrical knowledge, • Must be reliable and able to follow directions, • Helpful attitude and friendly demeanor, • Must have a valid and clean NY state driver’s license, • Dental insurance, • Disability insurance, • Health insurance, • Paid time off, • Paid training, • Vision insurance, • 10 hour shift, • 8 hour shift, • Monday to Friday, • Automotive Service Technician: 1 year (Required) We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Nissan of the Bronx is looking for smart, engaging, creative and dynamic people who want to join a team where they matter. We are committed to an environment where the customer is always treated with respect and dignity. Our associates are our most valuable resource and growth is encouraged through diligence, teamwork & creativity. Above all, there is the highest standard of honesty and integrity when conducting business. Your professional development is one of our top priorities, we're proud to offer our staff members a comprehensive benefits package, competitive compensation plans, and abounding avenues to grow your career with us. If you have an interest in automotive, and a desire to develop a career in the industry, apply today! Responsibilities • Checks all fluids and maintenance-related parts and tops-off or replaces fluids or filters/parts as required, • Diagnoses issues based on experience, analysis, and testing, • Follows all shop policy, procedure, safety, and environmental rules, • Makes repair recommendations and manages delivery of repairs by setting and managing customer expectations, • Performs routine service inspections or tests and completes standard maintenance jobs, • Repairs automobiles and light trucks as assigned, • Attends all staff meetings, training, and educational classes as required, • Complies with and enforces all safety policies and procedures, • Follows all safety and security procedures, • High school diploma or GED preferred, • At least one year of relevant experience, • ASE certifications, • Certification as a state inspector a plus, • Unrestricted driver's license and clean driving record, • Neat, clean, and professional appearance, • Able to safely operate motor vehicles in tight and small spaces, • Broad scope of automotive mechanical/electrical knowledge, • Must be reliable and able to follow directions, • Helpful attitude and friendly demeanor, • Must have a valid and clean NY state driver’s license, • Dental insurance, • Disability insurance, • Health insurance, • Paid time off, • Paid training, • Vision insurance, • 8 hour shift, • 5 day work week, • Flat tech guaranteed weekly, • Automotive Service Technician: 1 year (Required) We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Req ID: 332458 NTT DATA strives to hire exceptional, innovative and passionate individuals who want to grow with us. If you want to be part of an inclusive, adaptable, and forward-thinking organization, apply now. We are currently seeking a Network Smart Hands Supervisor to join our team in Yonkers, New York (US-NY), United States (US). The Smart Hands Supervisor is responsible for the supervision, training, and development of a ~15 member team supporting data center and remote IT infrastructure services across a 24/7/365 hospital environment. This role ensures efficient dispatch and execution of field service requests via ServiceNow, monitors service quality and SLA adherence and drives continuous improvement initiatives. The supervisor manages on-site resources and workload distribution, sets performance objectives, conducts evaluations, and maintains compliance with hospital protocols. Additionally, this position provides cross-coverage for the Smart Hands Dispatcher and the Infrastructure & IDF Supervisor as needed, making flexibility, operational awareness, and leadership critical to success. **This role requires working onsite daily at our client's facility and requires employee to be fully COVID and flu vaccinated on or before start date, to the extent required by applicable law. Only candidates local to Yonkers, NY will be considered for this role. Key Responsibilities • Team Supervision & Leadership, • Provide day-to-day supervision for 15 field technicians delivering Smart Hands support across multiple sites., • Oversee training, onboarding, skills development, and coaching aligned to team goals and technical requirements., • Set clear performance objectives, conduct staff evaluations, and manage performance improvement plans as needed., • Develop and manage working and on-call rosters, ensuring adequate coverage at all times including holidays and after-hours., • Oversee ticket dispatch, field technician assignments, and task prioritization using ServiceNow., • Coordinate with NOC, network engineering, and project teams to align field activities with technical directives., • Track work orders in real time, adjust assignments based on urgency or technician availability, and ensure timely completion., • Backfill Dispatcher role when needed, managing ticket queues and communications with stakeholders, • ServiceNow & SLA Oversight, • Monitor ticket accuracy, SLA compliance, and closure metrics within ServiceNow., • Conduct periodic audits and reporting to identify trends, gaps, and workflow improvements., • Escalate critical issues and coordinate with leadership or external vendors for urgent resolution, • Cross-Coverage & Support, • Serve as backup to the Infrastructure & IDF Supervisor, supporting 800+ IT closets and modular infrastructure tasks as needed, • Reporting & Communication, • Generate and distribute daily/weekly/monthly activity and performance reports., • Provide operational insights to leadership, including staffing needs, training gaps, and incident trends., • Act as a liaison between Smart Hands, Facilities, NOC, Engineering, and other stakeholder teams. Basic Requirements • 2+ years of experience managing or supervising technical field service teams (hospital environment preferred)., • Demonstrated ability to coach, mentor, and evaluate technical staff performance., • Familiarity with managing shift schedules, on-call rotations, and emergency response planning., • Experience with ticketing/reporting systems; ServiceNow experience strongly preferred., • Strong organizational, conflict resolution, and multitasking skills., • Ability to lift 50 lbs., work on ladders, and operate in physically demanding environments., • Reliable transportation and a clean, insurable driving record., • COVID-19 and flu vaccination (required for access to clinical facilities), • CompTIA A+, Network+, or Cisco CCNA., • Experience using cable testers, fiber/copper diagnostic tools, or environmental monitors., • Strong proficiency in Microsoft Excel, Word, PowerPoint., • Skilled in creating reports, dashboards, or operational performance summaries., • Ability to communicate clearly across technical and non-technical teams., • Visio or AutoCAD knowledge a plus for layout documentation. Where required by law, NTT DATA provides a reasonable range of compensation for specific roles. The starting pay range for this remote role is $89,000 - $110,000. This range reflects the minimum and maximum target compensation for the position across all US locations. Actual compensation will depend on a number of factors, including the candidate's actual work location, relevant experience, technical skills, and other qualifications. This position may also be eligible for incentive compensation based on individual and/or company performance. This position is eligible for company benefits including medical, dental, and vision insurance with an employer contribution, flexible spending or health savings account, life and AD&D insurance, short and long term disability coverage, paid time off, employee assistance, participation in a 401k program with company match, and additional voluntary or legally-required benefits. #INDICS About NTT DATA NTT DATA is a $30 billion trusted global innovator of business and technology services. We serve 75% of the Fortune Global 100 and are committed to helping clients innovate, optimize and transform for long term success. As a Global Top Employer, we have diverse experts in more than 50 countries and a robust partner ecosystem of established and start-up companies. Our services include business and technology consulting, data and artificial intelligence, industry solutions, as well as the development, implementation and management of applications, infrastructure and connectivity. We are one of the leading providers of digital and AI infrastructure in the world. NTT DATA is a part of NTT Group, which invests over $3.6 billion each year in R&D to help organizations and society move confidently and sustainably into the digital future. Visit us at us.nttdata.com Whenever possible, we hire locally to NTT DATA offices or client sites. This ensures we can provide timely and effective support tailored to each client's needs. While many positions offer remote or hybrid work options, these arrangements are subject to change based on client requirements. For employees near an NTT DATA office or client site, in-office attendance may be required for meetings or events, depending on business needs. At NTT DATA, we are committed to staying flexible and meeting the evolving needs of both our clients and employees. NTT DATA recruiters will never ask for payment or banking information and will only use @nttdata.com and @talent.nttdataservices.com email addresses. If you are requested to provide payment or disclose banking information, please submit a contact us form, . NTT DATA endeavors to make accessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process, please contact us at . This contact information is for accommodation requests only and cannot be used to inquire about the status of applications. NTT DATA is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. For our EEO Policy Statement, please click here. If you'd like more information on your EEO rights under the law, please click here. For Pay Transparency information, please click here.

Job Description Title: Patient Care Technician (PCT), IP Unit - PRN Location: Staten Island About us: ERG is a leading U.S. based, privately held, independent clinical research site company, and provider of clinical development services with expertise in early and late-stage neuroscience drug development. With 20 wholly owned clinical sites and 4 affiliated sites, we conduct in-patient and out-patient phase I-IV clinical research studies. ERG has 400+ in-patient beds, a large and growing database of patients suffering from mental illness, neurological disorders, sleep disorders, addictions, Acute and Chronic Pain, diabetes, and other illnesses as well as normal healthy volunteers who participate in trials for the advancement of medicine. With access to over 32 million patients/subjects and 5000 + completed trials, ERG continues to grow its capabilities and expand into indications where there are tremendous unmet medical needs in the United States and globally. Job Description: The Patient Care Technician assists with the conduct of clinical trials through overseeing the care of clinical trial subjects while housed on unit. Assist with the collection of biological samples, perform venipuncture, electrocardiograms, tube labeling, sample processing, documenting in subject charts, and other related tasks in accordance with the doctor’s written orders. In executing these responsibilities, the Patient Care Technician is guided by Good Clinical Practices (GCP), International Conference on Harmonization (ICH) guidelines, Health Insurance Portability and Accountability Act (HIPAA) and company standard operating procedures and policies. Responsibilities: • Perform regular safety and status checks on clinical trial subjects housed on unit as determined by physician orders., • Perform appropriate research protocol procedures as delegated which may include but are not limited to vital signs, blood collection and processing, ECGs, and point of care laboratory tests., • Perform basic lab procedures as delegated including but not limited to preparation of specimen tubes and labels, blood specimen collection, centrifuge operation, storing and shipping of lab specimens, accountability of specimens and notification of courier for specimen pick-ups., • Ensure that biological specimens are disposed of appropriately., • Maintain a clean, safe work environment for both fellow employees and clinical trial subjects., • Engage the clinical trial subjects in group activities or one-on-one activities while housed on unit., • Assure subjects have linens, toiletry items, and other sundries needed while the subject is housed on the unit., • Serve meals and provide snacks to clinical trial subjects while subjects are housed on unit., • Study, learn and comply with ERG site standard operating procedures, and other policies, practices and regulations where applicable., • Education and experience, • High school Degree or equivalent, • One (1) year of clinical experience preferred., • CPR Certification required., • Phlebotomy certification (national) preferred., • Understand regulatory requirements, as well as Good Clinical Practices (GCP) and International Conference on Harmonization (ICH) guidelines., • Able to communicate with providers, co-workers, and others in a collaborative and courteous manner., • Knowledgeable in medical terminology so as to communicate with physician office and staff., • Able to initiate or modify behavior to achieve desired outcomes despite environmental factors, priorities, or problems that might not be well defined or that are subject to change., • Requirements, • Ability to work independently and as a team player., • Ability to organize and prioritize within a changing environment., • Use safety/universal precautions to protect self, subjects and staff., • Able to appropriately implement protocol and regulatory requirements in study conduct., • Proficient in venipuncture, centrifugation, sample storage and performing electrocardiogram., • Excellent documentation practices, • Good organizational and interpersonal skills, • Attentive to detail, good initiative and able to work with changing priorities.

Job Description • We are hiring immediately for full time CENTRAL STERILE PROCESSING TECHNICIAN positions., • Location: Schwarzman Animal Medical Center - 510 East, 62nd Street, New York, NY 10065 Note: online applications accepted only., • Schedule: Full time schedule. Days may vary, 2:00 pm - 10:30 pm. Must be able to work every other weekend. More details upon interview., • Requirement: Central Sterile Processing Technician Certification (CRCST or equivalent) required., • Fixed Pay Rate: $19.00 per hour. Make a difference in the lives of people, your community, and yourself. Join a culture of opportunity with Crothall Healthcare. Our careers are filled with purpose and empower you to transform healthcare experiences. Take a look for yourself! Crothall Healthcare provides specialized, high-quality, innovative, and responsive support services exclusively to the healthcare industry. Crothall is the market leader in Environmental Services (EVS), and many of the almost 1,300 accounts it serves are recognized as U.S. News & World Report ranked Top Hospitals and Health Systems. Crothall has been recognized as one of Modern Healthcare’s Best Places to Work, and Best Place to Work in Pennsylvania, since 2013. Crothall has almost 30,000 dedicated team members across its core services, which include: Environmental Services, Patient Transportation, Patient Observation, Facilities Management, Healthcare Technology Solutions, Ambulatory Services, and Sterile Processing. Job Summary Summary: Delivers lab services at client locations. Essential Duties and Responsibilities: • Isolates and cryopreserves primary PBMCs from both whole blood and leukopaks., • Handles and processes primary blood and tissue from mouse and primate sources., • Maintains sterile technique while culturing isolated primary cells., • Performs established flow cytometry protocols on a routine basis., • Completes daily maintenance and QC protocols on flow cytometers., • Conducts analysis of flow cytometry data (FlowJo)., • Records results and uploads to relevant databases., • Processes customer requests from receipt until completion., • Maintains clear and accurate laboratory records., • Identifies and reports unusual results/outcomes., • Maintains clean and orderly lab space., • Maintains inventory of laboratory reagents and supplies., • Performs other duties as assigned. Qualifications: • Minimum two years of professional experience using sterile technique., • Minimum two years of professional experience with primary cell isolations., • Minimum one year professional experience performing in vitro cell based assays., • Previous flow cytometry experience required., • Experience conducting multiplex ELISAs & protein labeling strongly preferred., • Excellent verbal and written communication skills., • Full-time and part-time positions are offered the following benefits: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identify Theft Protection, Pet Insurance, and other voluntary benefits including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Crothall is a member of Compass Group. Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Application Deadline: applications are accepted ongoing until all openings are filled for this position. If an applicant is declined due to the position being filled, they may still be considered for future opportunities and are always welcome to reapply. Crothall maintains a drug-free workplace. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act.

Job DescriptionMatrix New World Engineering, a part of True Environmental and its partner firms, have united their strengths to establish the nation's premier environmental and engineering services consulting firm. This powerhouse organization offers an extensive range of services aimed at revolutionizing the built environment and preserving the natural one. Its diverse expertise encompasses environmental remediation, urban planning, engineering iconic coastal and marine structures, developing sustainable energy sources, and pioneering resource extraction methods. Explore further at and True-Environmental.com to discover the full scope of our capabilities. We are currently seeking a motivated Industrial Hygiene Technician to learn and support asbestos, lead, mold, and universal waste project monitoring and air sampling assignments in the New York metro area. Annual Salary Range: $25 – $35 per hour commensurate with experience and certifications What you'll do • Assist in performing air monitoring for asbestos abatement, lead, and mold remediation activities under direct supervision., • Conduct basic, routine site inspections and collect bulk samples following strict protocols., • Log field data, site conditions, and project-related issues for review by senior staff., • Assist senior staff with the investigation of indoor air quality and water intrusion events., • Attend job site health & safety inspections as an observer and trainee., • Support the preparation of reports and memos by organizing field data and documentation., • Maintain and calibrate field equipment and ensure compliance with proper chain-of-custody procedures.Minimum Requirements, • High School diploma or equivalent required., • 0-1 year of experience in a related field; recent graduates with relevant coursework or internships are encouraged to apply., • Basic oral and written communication skills; ability to document field notes clearly., • A minimum of one core certification is preferred (e.g., EPA/NYSDOL Air Sampling Technician or EPA/NYSDOL Asbestos Inspector)., • Working knowledge of MS Office software (Word, Excel)., • Must be willing to travel to and from job sites within the NJ/NYC area., • Must be able to pass a physical exam and be medically cleared to wear negative pressure respirator., • Must be available to occasionally work night or weekend hours and/or extended shifts beyond 8 hours., • Must possess a valid driver’s license and an acceptable driving record., • Must successfully pass a pre-employment drug test and will be subject to FRA-regulated random drug & alcohol testing.Preferred Qualifications, • AS or BS in physical sciences, industrial hygiene, safety, environmental sciences, or related science or engineering fields., • OSHA 10-hour or 30-hour Construction Safety certification., • Additional accreditations for asbestos, mold, or lead.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Job Description Job Specific Competencies: Directly accountable for preventing hospital acquired infections related to hand-hygiene performance of self and staff Under direct supervision, assists the operating surgeon in the care of patients in surgery and performs assigned selected duties. Prepares for surgery in an acceptable time frame. Prioritizes workload and prepares for the specific operative procedure utilizing appropriate Preference Care/Case Cart Requisition. Demonstrates acceptable standards of aseptic technique when scrubbed and a working knowledge of the surgical procedure, instrumentation, supplies and equipment needed.. Responds appropriately to any unanticipated or emergency situation that may arise intra-operatively & assists with CPR of patient during cardiac arrest. Utilize equipment properly, according to manufacturers recommendation and adhering to OR protocols. Ensures OR is stocked and ready for each case. Assures equipment is cleaned and maintained for use by the next staff member and/or patient. Follows the hospital's policy and procedures on discarding contaminated and hazardous materials. Maintains established hospital policies, procedures, directives, quality assurance,safety, environmental and infection control standards appropriate to this position. Performs other duties as assigned within the scope of practice. EDUCATION + EXPERIENCE REQUIREMENTS: High School Diploma or Equivalency Graduate of Accredited Surgical Technology Program approved by: CAAHEP - Commission on Accreditation of Allied Health Education Programs or ABHES - Accrediting Bureau of Health Education Schools. CREDENTIALS + QUALIFICATIONS: BLS by approved by AHA - American Heart Association Surgical Technician Certification (CST) Authorized by: NBSTSA - National Board of Surgical Technology and Surgical Assisting *Must be certified within 90 days of employment

Job Description Cresilon® is a Brooklyn-based biotechnology company that develops, manufactures, and markets hemostatic medical devices utilizing the company’s proprietary hydrogel technology. The company’s plant-based technology has revolutionized the current standard by stopping traumatic and surgical bleeds in seconds without the need for extended manual pressure. The company's current and future product lines target veterinary, human trauma, and human surgical applications. Cresilon's mission is to save lives. Learn more about the company at . The Production Technician I is responsible for the aseptic manufacturing of Cresilon’s products for the animal health industry. The Production Technician II will be trained in clean room operations, aseptic techniques, and must demonstrate the ability to successfully pass gowning qualifications. The position involves operating simple and complex processing equipment, routine sanitization of cleanroom facilities, and manual cleaning of equipment. The ideal candidate will have a proven track record of steady progress in a similar manufacturing environment and must possess a willingness to learn all equipment and jobs in the assigned manufacturing and sanitation of clean room facilities as required. Production Technicians are also responsible for the quality of products produced by ensuring compliance with local, State and Federal regulations, including current Good Manufacturing Practices (cGMP). • Perform line clearance of assigned production areas as required., • Perform equipment set up and disassembly activities., • Operate production, assembly and testing equipment, including heat sealers, bar code scanners, weighing scales, tumblers, autoclaves, filling equipment, and packaging equipment., • Formulate, fill, and pouch product in accordance with SOPs., • Troubleshoot all operating deviations and issues and coordinate with other functions when required., • Report both machine and operating deviations to area supervisor or designee., • Perform routine, preventative maintenance on equipment., • Perform cleaning and disinfection of the manufacturing spaces., • Perform cleaning and sterilization of manufacturing equipment., • Perform visual inspection of components and/or product in accordance with SOP’s and cGMP’s., • Perform sampling, intermediate, and finished goods packaging as per SOPs., • Package and ship raw materials for sterilization., • Perform material receiving, staging, material movements, and material replenishment as per SOPs., • Transport samples, materials, and equipment between multiple facilities., • Complete data entry and generate reports for material inventory movements., • Complete and maintain applicable logbooks and batch record paperwork as required and in accordance with GMP and GDP standards., • Maintain a clean production environment during shift., • Report all actual, near misses and potential accidents for further investigation., • Take immediate action to resolve any near miss situations., • Assist in investigation of all actual, near misses and potential accidents. Provide information to troubleshoot and take initiative to resolve operational issues independently., • Assist in project commissioning and validation activities, as necessary., • Prepare samples or prototypes as required for testing, or other evaluations, • Monitor the plant status and liaise with colleagues of other departments to ensure there is no interruption to manufacturing process., • Complete all required trainings: Read and Understand (TM1), Computer Based Training with Quiz (TM2), Instructor Led (TM3/TM4), and On-the-Job Trainings (TM5)., • Oversee training of junior employees on production processes as assigned., • Ensure proper communication and handling over of shift duties., • Support Environmental and Personnel Monitoring (EM/PM) activities as directed., • HS Diploma or Equivalent with 2+ years of relevant manufacturing experience in the pharmaceutical, biotechnology, or medical device industry OR 2 or 4 year degree with 0+ years of relevant experience., • Ability to read, understand, and execute written work instructions., • Ability to complete documentation accurately., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals, • Ability to become gowning qualified to work in a cleanroom environment., • Ability to problem solve and achieve business objectives., • Ability to adapt training approach., • Willingness to be flexible, and open minded to new processes or changes in direction., • Team oriented, building relationships with peers and managers in a proactive manner., • Excellent verbal and written communication skills., • Proficient in Microsoft Office (Word, Excel, Outlook)., • Paid Vacation, Sick, & Holidays, • Medical, Dental, and Vision Insurance, FSA: Dependent & Healthcare, Commuter & Parking Benefits, Long Term Disability Coverage, • Company Paid Life and Short-Term Disability Coverage, • Work/Life Employee Assistance Program, • 401(k) & Roth Retirement Savings Plan with company match up to 5%, • Monthly MetroCard Reimbursement This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. Cresilon makes hiring decisions based solely on qualifications, merit, and business needs at the time.

Job Description First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. Now Hiring: Paratransit Quality Control SpecialistLocation: 905 Brush Ave, Bronx, NY 10465 Starting Pay: $17.00 per hour (per union contract) Schedule: Full-time | Various shifts including weekends and holidays Start Your Career in Transportation and Maintenance If you're looking for a hands-on role that can grow into a lasting career, this position is an excellent starting point. As a Paratransit Quality Control Specialist, you'll help keep our fleet fueled, clean, and safe-ensuring our vehicles are ready to serve the community every day. This entry-level position provides exposure to a professional maintenance shop environment, allowing you to gain real-world experience, build relationships with mechanics and shop leadership, and open doors to future opportunities such as Mechanic, Maintenance Supervisor, or Paratransit Driver. What You'll Do • Fuel & Fluids: Fuel all paratransit vehicles and service trucks; check and top off fluid levels (oil, coolant, transmission, washer fluid, etc.), • Vehicle Quality: Inspect vehicles for damage during fueling, check tire pressure, and report issues to the shop, • Cleanliness: Clean and detail vehicle interiors and exteriors to meet fleet standards, • Fleet & Facility Support: Reposition vehicles in the yard to support dispatch operations; assist with minor maintenance tasks such as seat repairs, lamp replacements, or mirror adjustments, • Parts & Records: Maintain accurate fuel logs, inventory records, and variance reports, • Safety & Compliance: Follow all PPE, environmental, and safety protocols, including spill response procedures, • At least 21 years of age, • Valid driver's license with a clean driving record (minimum 3 years), • High school diploma or equivalent (preferred), • Reliable, safety-minded, and detail-oriented, • Comfortable working outdoors in all weather conditions, • Able to bend, kneel, and stand for long periods, • Flexible to work weekends, holidays, or extended hours as needed, • Interested in learning and growing within the transportation or automotive industry, • Medical, Dental & Vision: Employee contributes a percentage of the medical rate (union does not pay into medical), • Paid Time Off:, • 1 week of vacation after 1 year of service, • 2 PTO days and 1 paid birthday each year, • PTO and vacation increase with seniority, • Paid Holidays:, • New Year's Day, Presidents Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, Christmas Day, • After 1 year: Martin Luther King Jr. Day, Day After Thanksgiving, • Additional Benefits:, • $25,000 company-paid life insurance, • Annual boot allowance, • Union 401(k) plan, • Annual union pay increases, • Gain hands-on shop experience and mentorship from experienced maintenance staff, • Build a foundation for advancement into mechanic, driver, or leadership roles, • Enjoy a stable union position with consistent pay and strong benefits At First Student, our commitment to safety, dependability, and customer care creates an environment where you can thrive. With more than 60,000 employees across North America, we offer stability, growth, and exceptional training. Apply today to join our team! We aspire to have a culture where all people are First. We strive to attract and retain a diverse workforce; therefore, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. First is also committed to providing a drug-free workplace. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request .

Job DescriptionMatrix New World Engineering, a part of True Environmental and its partner firms, have united their strengths to establish the nation's premier environmental and engineering services consulting firm. This powerhouse organization offers an extensive range of services aimed at revolutionizing the built environment and preserving the natural one. Its diverse expertise encompasses environmental remediation, urban planning, engineering iconic coastal and marine structures, developing sustainable energy sources, and pioneering resource extraction methods. Explore further at and True-Environmental.com to discover the full scope of our capabilities. We are seeking an experienced Survey CAD Technician/Specialist to support our Land Survey group in preparing high-quality survey deliverables for New York City and State agency projects. The ideal candidate will have a strong background in AutoCAD Civil 3D, and or MicroStation, solid understanding of survey workflows, and hands-on experience working on projects for MTA, DDC, DEP, DOT, Parks, and other public agencies. Pay is 25-35/hr, but can be flexible for the right person. What you'll do • Draft and produce survey drawings including topographic, boundary, ALTA/NSPS, right-of-way, and utility surveys in compliance with agency standards., • Process field data and generate accurate base maps and digital terrain models (DTMs)., • Ensure CAD deliverables meet NYC agency CAD standards, coordinate systems, and layer naming conventions., • Collaborate with field crews, project managers, and engineers to maintain data consistency and resolve discrepancies., • Prepare record maps, easement maps, as-built drawings, and legal description exhibits., • Organize and manage CAD files and survey data efficiently across multiple projects., • Support proposal and QA/QC efforts by maintaining documentation and CAD templates.Minimum Qualifications, • 5+ years of CAD drafting experience in land surveying or civil design., • Proficiency in AutoCAD Civil 3D (required); familiarity with MicroStation., • Demonstrated experience with New York City and State agency projects (MTA, DDC, DEP, DOT, Parks, etc.)., • Strong understanding of survey data processing, coordinate systems, and geospatial references.Preferred Qualification, • Excellent attention to detail, communication, and organizational skills., • Ability to work independently while coordinating with multi-disciplinary teams., • Associate degree or higher in Surveying, Civil Technology, or related field preferred.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Job DescriptionSalary: $36.25/hr target Reports to: Site Operations Manager for day to day oversight; Clinical performance manager is the Regional Nurse Manager for clinical standards and development. Job Overview You will practice in a personable, nonhospital environment that prioritizes exceptional, personalized care and hospitality. Success is measured by quality, safety, and member experiencenot speed or volume. You will collaborate closely with physicians, nurses, and PCAs to deliver the right care, at the right time, from the right team, with reliable clinical coverage during business hours. Hospitality is a core job requirement and must be practiced consistently with members and colleagues. This role is designed for operational flexibility to meet dynamic clinical and member needs while maintaining a consistent foundation across sites. This position is dedicated to phlebotomy only. Primary responsibility is performing housecall phlebotomy across the New York City area, followed by inoffice phlebotomy support and preparation for the next days visits. Scope and schedule • Primary focus on morning house calls across NYC; afternoons generally onsite for additional phlebotomy needs, specimen processing, restocking, and nextday prep., • Standard business hours, with flexibility to support member needs, travel time, courier cutoffs, and sameday addons within scope., • Local travel required across NYC boroughs; routing and timing must account for transit, building access, and safety. Responsibilities • Deliver a hospitalityforward experience in every interaction: genuine welcome, attentive listening, timely responses, and thoughtful anticipation of needs. Ensure members feel safe, comfortable, and personally recognized throughout the visit., • Prepare for and conduct house calls independently or alongside a clinician as needed; provide safe, professional, doortodoor service including identity verification, consent/education within scope, and aftervisit instructions., • Perform venipuncture and capillary blood collection; collect, label, and handle specimens per protocol; perform spindown and packaging; manage chain of custody procedures; coordinate courier dropoffs/pickups and lab cutoff times; document promptly and accurately in the EHR., • Provide inoffice phlebotomy support after attending house call appointments: complete inoffice draws, specimen processing, label generation, courier handoff, and endofday reconciliation., • Plan and prep nextday visits: review schedules, prepare mobile kits and labels, print route sheets as needed, and confirm appointment logistics (address/entry, special instructions, fasting requirements)., • Maintain strict adherence to safety and infectioncontrol standards (PPE, sharps handling, exposure protocols); maintain clean, organized, auditready work areas and mobile kits., • Manage inventory and equipment: restock supplies, maintain centrifuge and mobile equipment, complete quality checks/logs, and escalate issues promptly., • Communicate clearly and proactively with PCAs, nurses, and physicians regarding scheduling, route changes, specimen issues, and clinical or operational concerns impacting patient care; uphold reliable handoffs and close the loop on outstanding items., • Participate in continuous improvement: surface bottlenecks, use data and feedback to inform workflow refinements, and collaborate on pragmatic changes that improve reliability and member experience., • Collaborate effectively alongside teammates and, where applicable, automated tools/systemsensuring tasks are performed competently regardless of whether executed by people or automation. Qualifications • Minimum three (3) years of relevant phlebotomy experience; recent experience with home/mobile draws preferred., • Certified Phlebotomy Technician (CPT) required; current BLS/CPR preferred., • Demonstrated excellence in memberfacing service with a hospitality mindset; alignment with organizational values, including compassionate care, growth mindset, and continual evolution., • Advanced proficiency with Apple devices and EHR workflows; accurate, realtime documentation., • Strong organization and time management; able to independently prioritize routes, manage buffers for transit/couriers, and adapt to sameday needs., • Demonstrated ability to prioritize and manage tasks efficiently, reliably and with sound judgment in a highly autonomous environment., • Reliable, timely travel across NYC (public transit/rideshare/personal vehicle as appropriate); ability to carry and manage mobile kits and supplies., • Immunization or proof of immunity required for MMR, Hepatitis B, and Tuberculosis., • Frequent travel between member homes and the office; variable building access (stairs/elevators), weather, and environmental conditions., • Regular lifting/carrying of up to ~25 lbs for mobile kits and supplies; prolonged walking/standing as needed., • Strict adherence to HIPAA, OSHA Bloodborne Pathogens, and infectioncontrol standards. Competencies (What Good Looks Like) • Hospitality as a core value: Warm, professional engagement; personal recognition; anticipatory support; consistent sense of safety and comfort for members and colleagues., • Operational flexibility: Adapts scheduling and responsibilities within scope to meet dynamic member and operational needs while safeguarding care quality and team well-being., • Data-informed and improvement-oriented: Uses data, feedback, and iteration to enhance reliability and reduce bottlenecks; embraces innovation that removes roadblocks., • Team and leadership enablement: Contributes to systems and structures that help teams thrive; collaborates constructively with Operations and clinical leadership per PM role delineation. Alignment with Private Medicals Principles of Clinical Staffing • Anchors Private Medicals vision to deliver the right care, at the right time, by the right team, through reliable coverage, hospitality-forward interactions, and safe, competent clinical work., • Expands the range of role profiles and flexes responsibly to support demand, preserving a consistent foundation across sites while honoring local needs., • Practices hospitality as a defined requirement and participates in continuous improvement informed by data and feedback.

Job Description Certified Site Safety is currently seeking Environmental Health and Safety Officer (EHSO) to assist with task of monitoring of construction project and staff. EHSO will work directly with the construction management team to ensure adherence and compliance to Health and Safety Plans, Work Specific Plans, Quality Plan and Schedules with Department of Environmental Protection EHS Policies and Procedures, BEDC EHS Standards and all Federal, State, City and local regulations and requirements. This job assignment will take place in a project site environment. Duties and Responsibilities include but not limited to: 1. Implement EHASP for construction management team, 2. Monitor and ensure contractor’s and subcontracts EHS compliance, 3. Interact with contractors and subcontractors daily, 4. Conduct daily audits and reporting site activities, 5. Investigate and reporting of accidents, incidents, 6. Perform administrative task utilizing clients document storage system Qualification: 1. Bachelor of Science degree in safety, environmental health and science, industrial hygiene, or related field; Certified as a Certified Safety Professional (CSP) or Certified as a Certified Industrial Hygienist (CIH) by the Board of Safety Professionals, Certified Health and Safety Technician (CHST)., 2. Excellent verbal and written communication skills and ability to interact with coworkers, contractors and regulatory agencies, 3. Strong attention to details, 4. 2-15 year documented relevant NYC DEP experience in the environmental compliance field and relevant job experience in construction industries, 5. OSHA 30 Construction Safety and Health completed within the past 5 years, 6. BEDC EHS Training, 7. Proficiency with computer applications including Microsoft Office Suite, 8. Ability to multi-task in a fast-paced demanding environment Company DescriptionCertified Site Safety of NY LLC provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Certified Site Safety of NY LLC complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Certified Site Safety of NY LLC expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of Certified Site Safety of NY LLC’s employees to perform their job duties may result in discipline up to and including discharge.Certified Site Safety of NY LLC provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Certified Site Safety of NY LLC complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.\r\nCertified Site Safety of NY LLC expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of Certified Site Safety of NY LLC’s employees to perform their job duties may result in discipline up to and including discharge.

Job Description Qualifications ✔ BS/BA degree in environmental science or equivalent ✔ Strong communication skills - position involves client in-person and zoom meetings, emails, and phone calls ✔ Report writing ✔ Microsoft and drawing computer program skills ✔ Minimum 6-8 years field experience working in the Asbestos/Lead industry ✔ Minimum 2 years Jr. PM experience, must be able to get projects off the ground and assist with field technician management and client development ✔ NYC Asbestos Investigator and/or EPA Lead Risk Assessor certifications preferred ✔ Large Asbestos/Lead Contract experience is a plus Job Description Our established (35+ years in business) North Jersey/New York environmental consulting firm has an opening for an Asbestos/Lead Project Manager with previous job experience conducting surveys, scoping, and managing field projects. This position works under the supervision of a Senior Project Manager and involves working in a team environment with Project Design, Scheduling, Accounting, Sales, and other company groups. While the primary focus of this position is expected to be NYC Asbestos/Lead projects, there is also the opportunity to expand into other geographic areas such as NJ and Westchester/Rockland/LI. Omega Environmental currently holds several large Asbestos/Lead Contracts and has other groups that focus on IAQ/IH, Legionella, Lead water testing, and training. This diversity provides multiple opportunities for our staff to expand their environmental careers and obtain additional licenses/certifications. Benefits ❖ Medical/dental/vision insurance ❖ Disability insurance (long term) ❖ Paid holidays ❖ Flex spending account ❖ 401K matching retirement account and profit sharing plans ❖ Travel expense re-imbursement and/or car allowance ❖ Performance bonus Company DescriptionAbout us Omega Environmental Services, Inc. was founded in 1989 when the key personnel of a “Fortune-500′′ company’s environmental engineering division founded their own company. The culture of the new organization is based on providing superior customer service, rapid response, and “turn-key” environmental health & safety services. Our company policy is to earn our client’s trust and respect by providing exceptional client service and consistently high-quality work. This policy has enabled Omega to work with “Fortune-500′′ companies, health care institutions, and insurance companies on their environmental health & safety projects. In addition to asbestos and lead programs, Omega specializes in OSHA compliance programs, health and safety programs, indoor air quality assessments, and Phase I and II environmental site assessments. We have also been leaders in the industry in microbial consulting, remediation design & oversight. Working with healthcare institutions and hospitals, infection control departments often call us to perform outside quality control or assist in preparation for Joint Commission on Accreditation of Healthcare Organizations (JC) inspections. At Omega, we are sensitive that our client’s financial resources available to address environmental and health, and safety issues may be limited. Yet the reduction of environmental liability is also critical. At Omega, both cost minimization and limiting environmental exposure are incorporated into our project design criteria. Since opening, Omega has experienced a health & controlled growth rate of nearly 20% per year, and our professional staff members have diverse backgrounds covering the following disciplines: Environmental Engineering, Industrial Hygiene, Ventilation, Toxicology, Risk Assessment, Air Pollution, Safety, and Environmental Law. Our field staff consists of professionals with undergraduate and advanced degrees and years of experience working with the public and private sectors on environmental projects. Over 80% of our work comes from referrals and repeat business. We have found success by focusing on the needs of our customers without compromising quality or liability-related issues.About us\r\n\r\nOmega Environmental Services, Inc. was founded in 1989 when the key personnel of a “Fortune-500′′ company’s environmental engineering division founded their own company. The culture of the new organization is based on providing superior customer service, rapid response, and “turn-key” environmental health & safety services. Our company policy is to earn our client’s trust and respect by providing exceptional client service and consistently high-quality work.\r\n\r\nThis policy has enabled Omega to work with “Fortune-500′′ companies, health care institutions, and insurance companies on their environmental health & safety projects. In addition to asbestos and lead programs, Omega specializes in OSHA compliance programs, health and safety programs, indoor air quality assessments, and Phase I and II environmental site assessments. We have also been leaders in the industry in microbial consulting, remediation design & oversight. Working with healthcare institutions and hospitals, infection control departments often call us to perform outside quality control or assist in preparation for Joint Commission on Accreditation of Healthcare Organizations (JC) inspections.\r\n\r\nAt Omega, we are sensitive that our client’s financial resources available to address environmental and health, and safety issues may be limited. Yet the reduction of environmental liability is also critical. At Omega, both cost minimization and limiting environmental exposure are incorporated into our project design criteria.\r\n\r\nSince opening, Omega has experienced a health & controlled growth rate of nearly 20% per year, and our professional staff members have diverse backgrounds covering the following disciplines: Environmental Engineering, Industrial Hygiene, Ventilation, Toxicology, Risk Assessment, Air Pollution, Safety, and Environmental Law. Our field staff consists of professionals with undergraduate and advanced degrees and years of experience working with the public and private sectors on environmental projects. Over 80% of our work comes from referrals and repeat business. We have found success by focusing on the needs of our customers without compromising quality or liability-related issues.

Job Description ASBESTOS FIELD PROJECT MONITORS/AIR SAMPLING TECHNICIANS Our firm Omega Environmental Services with main office in S. Hackensack, NJ, and a satellite office in NYC has continued to expand and evolve as an essential environmental health and safety business during COVID-19. We currently have open asbestos and other field positions for qualified individuals with good communication skills and reliability. We are interested in both candidates with asbestos industry experience/certification(s), as well as entry-level individuals looking to make a career change and/or jumpstart a new career pathway in environmental health and safety. [Asbestos Project Monitor/AST job details] 1. After orientation, training, and equipment assignment is complete, project field assignment set-up sheets are emailed out to asbestos field staff based upon their availability (days/nights/weekends)., 2. For larger projects greater than 5 shifts, a Project Manager will also coordinate an on-site kick-off meeting to discuss job-specific requirements. A field tech can call the Project Manager and/or Training Coordinator at any time if they have any questions or concerns., 3. PM/AST travels to NY and/or NJ site with air sampling equipment and required field documentation (punctuality is important because clients/contractors are waiting for us to start abatement projects)., 4. Asbestos air samples are set up at/around abatement work areas(s) according to published regulations and typically run 6-8 hours (while field tech. has to be present on-site and continuously observe and draft a sketch)., 5. After the monitoring shift, the field technician packages/ships air sample cassettes to the assigned laboratory and heads home or back to the office if there are equipment needs., 6. Air results are posted on-site following shift. Qualified candidate must have good communication, computer, and writing skills, plus be able to travel to/from projects sites in New Jersey and New York. Related keywords: monitor technician, hospital, telemetry technician Job Types: Full-time, Part-time, Per Diem Company DescriptionAbout us Omega Environmental Services, Inc. was founded in 1989 when the key personnel of a “Fortune-500′′ company’s environmental engineering division founded their own company. The culture of the new organization is based on providing superior customer service, rapid response, and “turn-key” environmental health & safety services. Our company policy is to earn our client’s trust and respect by providing exceptional client service and consistently high-quality work. This policy has enabled Omega to work with “Fortune-500′′ companies, health care institutions, and insurance companies on their environmental health & safety projects. In addition to asbestos and lead programs, Omega specializes in OSHA compliance programs, health and safety programs, indoor air quality assessments, and Phase I and II environmental site assessments. We have also been leaders in the industry in microbial consulting, remediation design & oversight. Working with healthcare institutions and hospitals, infection control departments often call us to perform outside quality control or assist in preparation for Joint Commission on Accreditation of Healthcare Organizations (JC) inspections. At Omega, we are sensitive that our client’s financial resources available to address environmental and health, and safety issues may be limited. Yet the reduction of environmental liability is also critical. At Omega, both cost minimization and limiting environmental exposure are incorporated into our project design criteria. Since opening, Omega has experienced a health & controlled growth rate of nearly 20% per year, and our professional staff members have diverse backgrounds covering the following disciplines: Environmental Engineering, Industrial Hygiene, Ventilation, Toxicology, Risk Assessment, Air Pollution, Safety, and Environmental Law. Our field staff consists of professionals with undergraduate and advanced degrees and years of experience working with the public and private sectors on environmental projects. Over 80% of our work comes from referrals and repeat business. We have found success by focusing on the needs of our customers without compromising quality or liability-related issues.About us\r\n\r\nOmega Environmental Services, Inc. was founded in 1989 when the key personnel of a “Fortune-500′′ company’s environmental engineering division founded their own company. The culture of the new organization is based on providing superior customer service, rapid response, and “turn-key” environmental health & safety services. Our company policy is to earn our client’s trust and respect by providing exceptional client service and consistently high-quality work.\r\n\r\nThis policy has enabled Omega to work with “Fortune-500′′ companies, health care institutions, and insurance companies on their environmental health & safety projects. In addition to asbestos and lead programs, Omega specializes in OSHA compliance programs, health and safety programs, indoor air quality assessments, and Phase I and II environmental site assessments. We have also been leaders in the industry in microbial consulting, remediation design & oversight. Working with healthcare institutions and hospitals, infection control departments often call us to perform outside quality control or assist in preparation for Joint Commission on Accreditation of Healthcare Organizations (JC) inspections.\r\n\r\nAt Omega, we are sensitive that our client’s financial resources available to address environmental and health, and safety issues may be limited. Yet the reduction of environmental liability is also critical. At Omega, both cost minimization and limiting environmental exposure are incorporated into our project design criteria.\r\n\r\nSince opening, Omega has experienced a health & controlled growth rate of nearly 20% per year, and our professional staff members have diverse backgrounds covering the following disciplines: Environmental Engineering, Industrial Hygiene, Ventilation, Toxicology, Risk Assessment, Air Pollution, Safety, and Environmental Law. Our field staff consists of professionals with undergraduate and advanced degrees and years of experience working with the public and private sectors on environmental projects. Over 80% of our work comes from referrals and repeat business. We have found success by focusing on the needs of our customers without compromising quality or liability-related issues.

Job DescriptionMatrix New World Engineering, a part of True Environmental and its partner firms, have united their strengths to establish the nation's premier environmental and engineering services consulting firm. This powerhouse organization offers an extensive range of services aimed at revolutionizing the built environment and preserving the natural one. Its diverse expertise encompasses environmental remediation, urban planning, engineering iconic coastal and marine structures, developing sustainable energy sources, and pioneering resource extraction methods. Explore further at and True-Environmental.com to discover the full scope of our capabilities. We are seeking an experienced Senior CAD Technician/Specialist to support our Land Survey group in preparing high-quality survey deliverables for New York City and State agency projects. The ideal candidate will have a strong background in AutoCAD Civil 3D, and or MicroStation, solid understanding of survey workflows, and hands-on experience working on projects for MTA, DDC, DEP, DOT, Parks, and other public agencies.What you'll do • Draft and produce survey drawings including topographic, boundary, ALTA/NSPS, right-of-way, and utility surveys in compliance with agency standards., • Process field data and generate accurate base maps and digital terrain models (DTMs)., • Ensure CAD deliverables meet NYC agency CAD standards, coordinate systems, and layer naming conventions., • Collaborate with field crews, project managers, and engineers to maintain data consistency and resolve discrepancies., • Prepare record maps, easement maps, as-built drawings, and legal description exhibits., • Organize and manage CAD files and survey data efficiently across multiple projects., • Support proposal and QA/QC efforts by maintaining documentation and CAD templates.Minimum Qualifications, • 5+ years of CAD drafting experience in land surveying or civil design., • Proficiency in AutoCAD Civil 3D (required); familiarity with MicroStation., • Demonstrated experience with New York City and State agency projects (MTA, DDC, DEP, DOT, Parks, etc.)., • Strong understanding of survey data processing, coordinate systems, and geospatial references.Preferred Qualification, • Excellent attention to detail, communication, and organizational skills., • Ability to work independently while coordinating with multi-disciplinary teams., • Associate degree or higher in Surveying, Civil Technology, or related field preferred.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Job Description Essential Job Functions and requirements of the Pest Control Technician: • Knowledge of pests, rodents, and other vermin., • Knowledge of pest control products, services, treatments, regulations, and safety procedures., • Ability to operate a motor vehicle., • Ability to enter/exit structures and crawl spaces, climb over and on top of structures, ascend and descend stairs and ladders., • Ability to use required personal protective equipment., • Ability to visually inspect for pests, pest entries, etc., • Ability to tolerate variety of environmental conditions, including seasonal weather, damp and/or dusty locations., • Follows all JP McHale Pest Management Company policies, procedures and guidelines., • Follows OSHA/FIFRA policies and procedures when carrying out pest control services., • Operates company vehicle safely; and maintains vehicle to comply with DOT and company guidelines., • Completes services as scheduled and provides appropriate documentation of services performed., • Reports and paperwork are thorough, accurate, legible, and on time., • Acts quickly and effectively to address actual or potential problems., • Paid time off,, • Employees paid on a weekly basis, • Long and short-term disability, Accidental, Critical Illness, and Hospital Indemnity Insurance, • Must have at least 3 years of driving experience to drive a company vehicle., • A valid New York state driver's license with an acceptable driving record (for driving positions), • The ability to read, write, speak, and comprehend English Job Type: Full-time Pay: From $2.00 - $30.00 per hour Benefits: • Paid time off, • 8 hour shift, • Driver's License (Preferred)

Job Description Essential Job Functions and requirements of the Pest Control Technician: • Knowledge of pests, rodents, and other vermin., • Knowledge of pest control products, services, treatments, regulations, and safety procedures., • Ability to operate a motor vehicle., • Ability to enter/exit structures and crawl spaces, climb over and on top of structures, ascend and descend stairs and ladders., • Ability to use required personal protective equipment., • Ability to visually inspect for pests, pest entries, etc., • Ability to tolerate variety of environmental conditions, including seasonal weather, damp and/or dusty locations., • Follows all JP McHale Pest Management Company policies, procedures and guidelines., • Follows OSHA/FIFRA policies and procedures when carrying out pest control services., • Operates company vehicle safely; and maintains vehicle to comply with DOT and company guidelines., • Completes services as scheduled and provides appropriate documentation of services performed., • Reports and paperwork are thorough, accurate, legible, and on time., • Acts quickly and effectively to address actual or potential problems., • Paid time off,, • Employees paid on a weekly basis, • Long and short-term disability, Accidental, Critical Illness, and Hospital Indemnity Insurance, • Must have at least 3 years of driving experience to drive a company vehicle., • A valid New York state driver's license with an acceptable driving record (for driving positions), • The ability to read, write, speak, and comprehend English Job Type: Full-time Pay: From $20.00 - $30.00 per hour Benefits: • Paid time off, • 8 hour shift, • Driver's License (Preferred)

Job Description Come and join an amazing team that is passionate about what we do! A mid-size local water treatment company is looking for a professional person to manage accounts in the New York City Metropolitan Area. Your role will include: • Training with a certified professional., • Scheduling and setting work priorities, • Evaluating and scheduling service for Fortune 500 Accounts., • Interfacing with building personnel, general contractors and project managers to identify concerns and maintain good customer relations., • Be the key point of contact for the customer, and resolve issues and complaints to customer’s satisfaction as well as provide water treatment expertise to answer questions, • Ensure that material and equipment are ordered and shipped for clients., • Schedule service visits to ensure against down time of water treatment program., • Monitor efficiency and quality control of water treatment program., • Generate reports on all services, inventory, and concerns. Review reports with management., • 7G license or pesticide applicators licenses equivalent required, • Mechanical aptitude; able to learn to use, maintain, and understand equipment and system., • Physical ability to carry a 30-pound backpack through the city and climb safe ladders and ability to wear required PPE., • Decision making ability, • Associate degree-Technical (minimum); Environmental or HVAC-related are highly preferred, • Water Treatment Service Experience preferred., • Flexible work hours, including late hours and weekends, but most work takes place during business hours, • Valid Driver’s License, • Excellent interpersonal and organization skills, able to maintain and keep information confidential., • Must be able to meet deadlines and report information timely and accurately., • Computer and time management skills., • Ability to work with all levels within the organization., • Great customer services skills with a can-do attitude, • Possess or obtain required training certifications, such as a New York 7G Pesticide Technician certification, • Ability to attend quarterly in-person staff meetings in New Jersey, • Ability to use required technology, including, but not limited to Microsoft office, smart phone apps, e-training, and other work-related software, • Competitive Salary:, • Salary range starting at $50K to $60K based on experience, valid certifications and training., • After the first year, salary will be based on knowledge, capacity, and customer service with a high growth potential. Commission will also be paid based on the sale of additional services, chemicals and equipment that are sold to the client., • 401K (with employer matching up to 4%), • Accrued PTO and paid holidays, • Generous employer contribution towards health benefits costs, • Employer paid life insurance, with additional options, • Employer paid supplemental short term disability insurance, • Pretax benefit options, • We provide all tools required to perform duties including work computer and cell phone, • All costs associated for professional certifications are paid by the company, • Professional development and growth, and quarterly performance conversations, • Other perks Tower Water is an Equal Opportunity Employer. We are committed to creating an inclusive environment for all employees and applicants, regardless of race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. We encourage individuals from all backgrounds to apply.

At Enexia, we are committed to delivering high-quality, patient-centered pharmaceutical services with a strong focus on accuracy, safety, and innovation. Our state-of-the-art compounding laboratory provides customized medications that meet the unique needs of the individuals and communities we serve. We are expanding our team and seeking a skilled Licensed & Certified Pharmacy Technician with compounding experience to join our growing operation. Position Summary The Licensed Certified Pharmacy Technician – Compounding Lab plays a key role in the preparation of sterile and/or non-sterile compounded medications. This role requires strict adherence to USP guidelines, exceptional attention to detail, and strong organizational skills to ensure the safety and accuracy of all compounded products. Responsibilities • Prepare sterile and/or non-sterile compounded medications in accordance with USP <795>, <797>, and <800> guidelines (as applicable)., • Follow all Standard Operating Procedures (SOPs), formulations, and batch record requirements., • Measure, weigh, and mix ingredients with precision using appropriate compounding tools and equipment., • Perform labeling, packaging, and final preparation of compounded prescriptions., • Maintain cleanliness and compliance in compounding areas, including hood certifications, environmental monitoring, and routine cleaning protocols., • Manage inventory of chemicals, supplies, and equipment; report shortages or discrepancies., • Assist pharmacists in quality assurance activities, documentation, and recordkeeping., • Demonstrate full compliance with state pharmacy regulations, accreditation standards, and company policies., • Active state Pharmacy Technician License (required)., • Minimum 1–2 years of compounding experience preferred (sterile or non-sterile)., • Knowledge of USP <795>, <797>, <800> standards and compounding best practices., • Strong mathematical competency and the ability to follow detailed procedures accurately., • Excellent communication skills, reliability, and professionalism., • Ability to stand for extended periods and perform tasks requiring manual dexterity. Why Join Us? • Competitive pay based on experience, • Health, dental, and vision benefits, • PTO and paid holidays, • Supportive team environment, • Opportunities for growth and advanced training, • Safe, modern compounding workspace

Job DescriptionIntroduction Gallagher is a global leader in insurance, risk management and consulting services. We help businesses grow, communities thrive and people prosper. We live a culture defined by The Gallagher Way, our set of shared values and guiding tenets. A culture driven by our people, over 55,000 strong, serving our clients with customized solutions that will protect them and fuel their futures. Overview Gallagher Bassett Technical Services is seeking a qualified Site Safety Manager to become a valued member of our Safety & Health team. The ideal candidate for this position must be a proactively motivated individual with the ability to manage projects and deliver quality consulting services with minor supervision. This Site Safety Manager position is a casual (on as needed basis, possibly going to a full-time) position overseeing safety operations for New York City metro area construction projects. The Site Safety Manager shall exclusively be responsible for safety matters related to the Work Site for which they are assigned to and shall not have any other responsibilities associated with the Contract. Responsibilities • This position will report directly to Director of Field Operations (NY Metro Area)., • Implement and enforce applicable construction site safety programs in accordance with all federal, state, local, and our customer’s needs., • Oversee and manage all site activities that relate to safe work practices. Review all construction/engineering designs and plans., • Ensure our Clients’ subcontractors perform all required actions and duties as it relates to system safety compliance; fire/ life safety; safety training; required safety certification; emergency procedures, plans and drills; and any other environmental safety/risk management compliance., • Safety/security implications related to contractor and subcontractor operations., • Perform daily safety inspection report audits and related testing and verification of operational safety readiness., • Coordination of other safety personnel for construction or build-out projects/activities., • Manage the supply and deployment of PPE to field personnel., • Coordination of Safety related items with the General Contractor’s office., • Familiarity with and environmental regulations and guidelines and workplace hazard controls; and ability to provide recommendations to reduce potential workplace hazards., • High school diploma or GED equivalent, • A valid NYC Department of Buildings (DOB) Licensed Site Safety Manager, • A valid 62-hr. Supervisor SST card, • A valid FDNY Certificate of Fitness S56, • Past experience and/or familiarity with the commercial high rise and/or institutional building construction development projects., • Competent to instruct and provide training/instruction on-site personnel as needed., • Ability to read, write, and speak English fluently. Preferred:, • NYC DOB licensed Construction Superintendent, • Certified Health and Safety Technician (CHST) preferred, but not required., • Successful completion of the 30-hour OSHA Construction Safety & Health (29 CFR 1926) Course, • Active member of American Society of Safety Professionals (ASSP)., • Bi-lingual or multi-lingual communication skills., • Ability to negotiate client properties including walking, climbing, lifting, and standing., • Ability to work independently to deliver on a timely basis with minimal supervision, • Strong organizational skills to participate in multiple projects simultaneously, prioritize assignments and prepare daily/comprehensive reports., • Strong analytical and critical thinking skills to interpret collected data/information, apply appropriate occupational safety and health standards/regulations, and offer recommendations for improvement., • Strong understanding of regulatory, professional, and industry standards and practices., • Proactive attitude and customer service focus. On top of a competitive salary, great teams and exciting career opportunities, we also offer a wide range of benefits. Below are the minimum core benefits you’ll get, depending on your job level these benefits may improve: • Medical/dental/vision plans, which start from day one!, • Life and accident insurance, • 401(K) and Roth options, • Tax-advantaged accounts (HSA, FSA), • Educational expense reimbursement, • Digital mental health services (Talkspace), • Flexible work hours (availability varies by office and job function), • Training programs, • Gallagher Thrive program – elevating your health through challenges, workshops and digital fitness programs for your overall wellbeing, • Charitable matching gift program Apply to review our U.S. Eligibility Requirements and Pay Disclosure Statement Inclusion and diversity (I&D) is a core part of our business, and it’s embedded into the fabric of our organization. For more than 95 years, Gallagher has led with a commitment to sustainability and to support the communities where we live and work. Gallagher embraces our employees’ diverse identities, experiences and talents, allowing us to better serve our clients and communities. We see inclusion as a conscious commitment and diversity as a vital strength. By embracing diversity in all its forms, we live out The Gallagher Way to its fullest. Gallagher believes that all persons are entitled to equal employment opportunity and prohibits any form of discrimination by its managers, employees, vendors or customers based on race, color, religion, creed, gender (including pregnancy status), sexual orientation, gender identity (which includes transgender and other gender non-conforming individuals), gender expression, hair expression, marital status, parental status, age, national origin, ancestry, disability, medical condition, genetic information, veteran or military status, citizenship status, or any other characteristic protected (herein referred to as “protected characteristics”) by applicable federal, state, or local laws. Equal employment opportunity will be extended in all aspects of the employer-employee relationship, including, but not limited to, recruitment, hiring, training, promotion, transfer, demotion, compensation, benefits, layoff, and termination. In addition, Gallagher will make reasonable accommodations to known physical or mental limitations of an otherwise qualified person with a disability, unless the accommodation would impose an undue hardship on the operation of our business. Powered by JazzHR BZzgty9dFh

Job Description Hudson Regional Hospital, nestled in Secaucus, New Jersey, is a distinguished healthcare institution committed to building a healthier community through exceptional care, advanced technology, and knowledgeable physicians. We take pride in being the #1 choice for surgery, boasting the Institute for Robotic Surgery, equipped with the latest surgical robots and six SRC Center of Excellence designations. This places us at the forefront of robotic and minimally invasive surgery, with the unique distinction of being the world's first hospital to receive the SRC Center of Excellence designation in Robotic Spine Surgery. Duties: Directly accountable for preventing hospital acquired infections related to hand-hygiene performance of self and staff Under direct supervision, assists the operating surgeon in the care of patients in surgery and performs assigned selected duties. Prepares for surgery in an acceptable time frame. Prioritizes workload and prepares for the specific operative procedure utilizing appropriate Preference Care/Case Cart Requisition. Demonstrates acceptable standards of aseptic technique when scrubbed and a working knowledge of the surgical procedure, instrumentation, supplies and equipment needed. Responds appropriately to any unanticipated or emergency situation that may arise intra-operatively & assists with CPR of patient during cardiac arrest. Utilizes equipment properly, according to manufacturer's recommendation and adhering to OR protocols. Ensures OR is stocked and ready for each case. Assures equipment is cleaned and maintained for use by the next staff member and/or patient. Follows the hospital's policy and procedures on discarding contaminated and hazardous materials. Maintains established hospital policies, procedures, directives, quality assurance, safety, environmental and infection control standards appropriate to this position. EDUCATION + EXPERIENCE REQUIREMENTS: High School Diploma or Equivalency Graduate of Accredited Surgical Technology Program approved by: CAAHEP - Commission on Accreditation of Allied Health Education Programs or ABHES - Accrediting Bureau of Health Education Schools. CREDENTIALS + QUALIFICATIONS: BLS by approved by AHA - American Heart Association Surgical Technician Certification (CST) Authorized by: NBSTSA - National Board of Surgical Technology and Surgical Assisting *Must be certified within 90 days of employment

Job Description * Laboratory Technicianto Director Business Development-Safety & Toxicology ServicesLab TELab Title: Laboratory Technician Location: Secaucus, NJ Reports to: Laboratory Manager Perdiem Frontage Laboratories Inc. is an award winning, publicly listed (HKSE), full-service CRO/Contract Research Organization operating over 25 state-of-the-art laboratories across the US, Canada and China, and growing over 30% YOY. Our core competencies include drug metabolism, pharmacokinetics/ pharmacodynamics (PK/PD), safety and toxicology, bioanalytical services, chemistry and manufacturing controls for drug development, and core laboratory services for clinical trials. Position/Job Summary: The laboratory technician performs a variety of laboratory procedures as required by the study protocol. Laboratory technicians are responsible for assisting the Laboratory Manager, Principal Investigator, Clinical Research Coordinators, and other medical professionals in the preparation and handling of specimens, analyzing results, and maintaining laboratory equipment. Laboratory Technicians ensure accuracy, quality control, and adherence to safety protocols, contributing directly to scientific research, development of new products, or medical diagnostics. Roles & Responsibilities: • Performs routine laboratory procedures including specimen labeling, collection, processing, and shipping in accordance with established SOPs and/or study protocol under the supervision of the Laboratory Manager, Clinical Research Coordinator, Principal Investigator, and Sub-Investigators., • Operate and maintain laboratory equipment such as centrifuges, pipettes, and refrigerators/freezers., • Develop a strong working knowledge of the study protocols and flow chart of study procedures and implement study procedures in full compliance with protocol requirements., • Maintain accurate and timely documentation in laboratory or study-specific documents, temperature logs, and shipping logs., • Perform environmental monitoring and equipment temperature checks to ensure proper specimen storage conditions., • Assist with inventory management, restocking supplies, and maintaining organized work areas., • Ensure compliance with safety, quality, and regulatory standards (GCP and internal QA procedures)., • Support weekend and surge workload coverage as needed based on operational demands., • Assist Laboratory Manager in any task as needed. Education, Experience & Skills Required: • Associate or BS in biology, chemistry, or related area, or completion and certification of Lab Technician course from an accredited or allied health training school., • 1 year of experience in clinical research laboratory or related medical field., • Proficiency in laboratory techniques and laboratory equipment operation., • Good communication skills., • Excellent organization and planning skills. Salary and Benefits: Frontage Laboratories offers a competitive compensation and benefits package including health and dental insurance, a 401(k) plan, disability insurance, and life insurance. Frontage Laboratories Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Job Description Essential Job Functions and requirements of the Pest Control Technician: • Knowledge of pests, rodents, and other vermin., • Knowledge of pest control products, services, treatments, regulations, and safety procedures., • Ability to operate a motor vehicle., • Ability to enter/exit structures and crawl spaces, climb over and on top of structures, ascend and descend stairs and ladders., • Ability to use required personal protective equipment., • Ability to visually inspect for pests, pest entries, etc., • Ability to tolerate variety of environmental conditions, including seasonal weather, damp and/or dusty locations., • Follows all JP McHale Pest Management Company policies, procedures and guidelines., • Follows OSHA/FIFRA policies and procedures when carrying out pest control services., • Operates company vehicle safely; and maintains vehicle to comply with DOT and company guidelines., • Completes services as scheduled and provides appropriate documentation of services performed., • Reports and paperwork are thorough, accurate, legible, and on time., • Acts quickly and effectively to address actual or potential problems., • Paid time off,, • Employees paid on a weekly basis, • Long and short-term disability, Accidental, Critical Illness, and Hospital Indemnity Insurance, • Must have at least 3 years of driving experience to drive a company vehicle., • A valid New York state driver's license with an acceptable driving record (for driving positions), • The ability to read, write, speak, and comprehend English Job Type: Full-time Pay: From $20.00 - $30.00 per hour Benefits: • Paid time off, • 8 hour shift, • Driver's License (Preferred)

Job Description Essential Job Functions and requirements of the Pest Control Technician: • Knowledge of pests, rodents, and other vermin., • Knowledge of pest control products, services, treatments, regulations, and safety procedures., • Ability to operate a motor vehicle., • Ability to enter/exit structures and crawl spaces, climb over and on top of structures, ascend and descend stairs and ladders., • Ability to use required personal protective equipment., • Ability to visually inspect for pests, pest entries, etc., • Ability to tolerate variety of environmental conditions, including seasonal weather, damp and/or dusty locations., • Follows all JP McHale Pest Management Company policies, procedures and guidelines., • Follows OSHA/FIFRA policies and procedures when carrying out pest control services., • Operates company vehicle safely; and maintains vehicle to comply with DOT and company guidelines., • Completes services as scheduled and provides appropriate documentation of services performed., • Reports and paperwork are thorough, accurate, legible, and on time., • Acts quickly and effectively to address actual or potential problems., • Paid time off,, • Employees paid on a weekly basis, • Long and short-term disability, Accidental, Critical Illness, and Hospital Indemnity Insurance, • Must have at least 3 years of driving experience to drive a company vehicle., • A valid New York state driver's license with an acceptable driving record (for driving positions), • The ability to read, write, speak, and comprehend English Job Type: Full-time Pay: From $20.00 - $30.00 per hour Benefits: • Paid time off, • 8 hour shift, • Driver's License (Preferred)

Job DescriptionMatrix New World Engineering, a part of True Environmental and its partner firms, have united their strengths to establish the nation's premier environmental and engineering services consulting firm. This powerhouse organization offers an extensive range of services aimed at revolutionizing the built environment and preserving the natural one. Its diverse expertise encompasses environmental remediation, urban planning, engineering iconic coastal and marine structures, developing sustainable energy sources, and pioneering resource extraction methods. Explore further at and True-Environmental.com to discover the full scope of our capabilities. We are currently seeking a highly experienced Industrial Hygiene Specialist to independently manage and execute asbestos, lead, mold, and general industrial hygiene project consulting assignments in the New Jersey / New York metro area.Annual Salary Range: $40 – $55 per hour commensurate with experience and certificationsWhat You'll Do • Independently perform and manage air monitoring for asbestos abatement, lead, and mold remediation activities., • Conduct complex indoor air quality investigations, including sampling design and interpreting results related to water intrusion events., • Serve as the primary on-site representative for routine and non-routine site inspections, including comprehensive bulk sample collection., • Develop complete, high-quality technical reports, memos, and addendums, requiring minimal review from Project Management, to document site conditions and project-related issues., • Conduct job site health & safety inspections and identify/document potential hazards., • Interact directly with contractors and sub-contractors to coordinate site access and daily activities., • Mentor and train Junior Technicians on field procedures, safety protocols, and sampling techniques.Minimum Qualifications, • High School diploma required; AS or BS degree in a related field is strongly preferred., • Minimum of 3-5 years of direct experience performing asbestos, lead paint, IAQ/mold, and general industrial hygiene monitoring/inspections., • Strong oral and written communication skills with proven ability to draft professional technical reports., • Possession of a comprehensive combination of certifications (minimum of 3 of the following):, • EPA AHERA / NYSDOL Asbestos Project Monitor and Air Sampling Technician, • NYSDOL Mold Assessor, • NJ/EPA/NY Lead Risk Assessor/Inspector, • NYCDEP Asbestos Investigator, • Thorough working knowledge of MS Office software and industry-specific software/databases., • Strong knowledge of applicable OSHA, EPA, and state/local regulations for asbestos, lead paint, etc., • Must be willing to travel to and from job sites within the NJ / NYC area., • Must be able to pass a physical exam and be medically cleared to wear negative pressure respirator., • Must be available to occasionally work night or weekend hours and/or extended shifts beyond 8 hours., • Must possess a valid driver’s license and an acceptable driving record., • Must successfully pass a pre-employment drug test and will be subject to DOT-regulated random drug & alcohol testing.Preferred Qualifications, • OSHA 40-hour HAZWOPER certification., • Additional asbestos accreditations (e.g., EPA/NYSDOL Project Designer, Certified Safety Professional)., • Experience performing health and safety oversight and/or construction management.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Job DescriptionMixlab, the fast-growing veterinary compounding pharmacy, is hiring a Compounding Pharmacy Technician in our New York pharmacy. We are looking for a Technician who is obsessed with details and is driven by an ability to #makeithappen for our customers and their furry (and scaly!) friends no matter what. You will be an integral part in helping us to ensure our NY operations run smoothly, and to make Mixlab a 100% dependable resource for our customers and veterinarians alike. We are seeking candidates interested in Full-time or Part-Time evening shifts to be scheduled as followsFull-time - Mon-Fri 3:30 pm - midnightPart-Time - Tuesday-Friday 4:30 pm - midnightAbout the Role: • Assist with the compounding of nonsterile pharmaceutical preparations including but not limited to capsules, oral liquids, topical medications, otic preparations, and medicated treats under the supervision of the managing pharmacist. Please note: Hormones and other potentially hazardous chemicals are used in nonsterile compounding, • Consistently meet standards of accuracy and potency, • Package and label prescriptions, including bulk medications, • Monitor inventory levels, re-order low inventory or expiring chemicals, and receive new inventory, • Adhere to USP guidelines as related to non-sterile compounding, • Perform environmental monitoring and cleaning tasks as indicated in SOPs, • Assist team members and problem solve with pharmacist’s supportAbout You:, • You have at least 2 years of experience working as a pharmacy technician directly with pharmacists in a compounding pharmacy, • You have experience working in veterinary care or the medical field, or a strong interest in working in the field, • You have strong attention to detail, • You have a customer-focused (and in our case, a pet-focused!) mindset, • You thrive in a fast-paced work environment, • You have excellent communication skills - both written and verbal - and are a collaborative, team-player, • You have an all-hands-on-deck attitude with an ability to remain calm and excel under pressure, • You have the ability to learn and adapt to new processes and procedures, • You constantly strive to “wow” clients and patients, • You have a strong sense of ownership and accountability, • You are scrappy and resourceful, • You’re not afraid of wearing multiple hats - you pitch in to help the team when necessary, • You have flexibility to work nights, weekends, and holidays, • MUST LOVE PETS and their people!, • Physical Requirements: Excellent hand-eye coordination, and ability to move, lift, or carry up to thirty (30) poundsWhat We Offer:, • 100% employer-paid health, dental and vision insurance for our employees, effective on the first of the month following your start date, • Paid time off for vacation, holidays and sick time, with the ability to accrue more vacation time with increased tenure, • Competitive starting wages with the opportunity for rapid career growth, promotion, and wage increases, • Company Stock Options, • Pre-tax commuter benefits, dependent care, HSA and FSA, • Employer-paid short and long-term disability leave, parental leave, and life insurance, • 401k with $300/year match, • Referral bonus payouts of up to $1,000 for a successful referral, • Human and pet wellness benefits, including $650/year allowance for routine pet care through Wagmo, • Discounts on many items through Perkspot

Job Description We’re seeking a dedicated Water Treatment Service Technician with the skills and experience to provide our clients the peace of mind knowing that their water systems are being serviced and protected. As the Service Technician, you will have the opportunity to bring your professionalism, dedication, and expertise to a dynamic team that values quality and consistency. We value that you take pride in your work, ensuring that every task is completed to the highest standard. Your ability to follow clear processes and your focus on delivering exceptional results will be key to your success in this role. You will thrive in an environment where you can work independently, manage your own schedule, and be the primary point of contact for our valued clients. Your technical skills and commitment to excellence will help you build strong relationships with customers, ensuring their satisfaction and the smooth operation of their water treatment programs. Join us and be part of a team that recognizes and rewards your hard work and dedication. Do you have a can-do attitude and a passion for what you do? Do you value reliability and reputation? Do you believe being responsive builds a foundation for a string relationship? Come and join an amazing team that is passionate about what we do! Work location: New York City Metropolitan Area. Your role will include: • Training with a certified professional., • Scheduling and setting work priorities, • Evaluating and scheduling service for Fortune 500 Accounts., • Interfacing with building personnel, general contractors and project managers to identify concerns and maintain good customer relations., • Be the key point of contact for the customer, and resolve issues and complaints to customer’s satisfaction as well as provide water treatment expertise to answer questions, • Ensure that material and equipment are ordered and shipped for clients., • Schedule service visits to ensure against down time of water treatment program., • Monitor efficiency and quality control of water treatment program., • Generate reports on all services, inventory, and concerns. Review reports with management., • 3 to 5 years direct water treatment experience in a similar role., • 7G license or pesticide applicators licenses equivalent required, • Mechanical aptitude; able to learn to use, maintain, and understand equipment and system., • Physical ability to carry a 30-pound backpack through the city and climb safe ladders and ability to wear required PPE., • Decision making ability, • Associate degree-Technical (minimum); Environmental or HVAC-related are highly preferred, • Water Treatment Service Experience preferred., • Flexible work hours, including late hours and weekends, but most work takes place during business hours, • Valid Driver’s License, • Excellent interpersonal and organization skills, able to maintain and keep information confidential., • Must be able to meet deadlines and report information timely and accurately., • Computer and time management skills., • Ability to work with all levels within the organization., • Great customer services skills with a can-do attitude, • Possess or obtain required training certifications, such as a New York 7G Pesticide Technician certification, • Ability to attend quarterly in-person staff meetings in New Jersey, • Ability to use required technology, including, but not limited to Microsoft office, smart phone apps, e-training, and other work-related software, • Competitive Salary:, • Salary range starting at $50K to $60K based on experience, valid certifications and training., • After the first year, salary will be based on knowledge, capacity, and customer service with a high growth potential. Commission will also be paid based on the sale of additional services, chemicals and equipment that are sold to the client., • 401K (with employer matching up to 4%), • Accrued PTO and paid holidays, • Generous employer contribution towards health benefits costs, • Employer paid life insurance, with additional options, • Employer paid supplemental short term disability insurance, • Mileage reimbursement for personal vehicle use, • Pretax benefit options, • We provide all tools required to perform duties including work computer and cell phone, • Paid training and professional certifications, • Professional development and growth, and quarterly performance conversations, • Other perks If you are a skilled and dedicated professional looking to make a significant impact in the water treatment industry, we want to hear from you. At Tower Water, we value professionalism, attention to detail and commitment to excellence. Join our team and be part of a dynamic environment where your expertise will be recognized and rewarded. Apply now to become a key player in ensuring the smooth operation and efficiency of our clients' water treatment programs. Submit your resume and cover letter today to take the next step in your career with Tower Water. Tower Water is an Equal Opportunity Employer. We are committed to creating an inclusive environment for all employees and applicants, regardless of race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. We encourage individuals from all backgrounds to apply.

Job DescriptionPosition Summary The Body Shop Technician is responsible for performing high-quality bodywork, structural repairs, and refinishing on medium- and heavy-duty diesel trucks. This role ensures damaged fleet and customer vehicles are restored to safe, functional, and aesthetic condition in accordance with OEM standards, insurance requirements, and company quality expectations. Key ResponsibilitiesBody & Structural Repairs * Diagnose and repair structural damage on truck cabs, frames, bumpers, hoods, and panels. * Perform metal fabrication, cutting, welding, grinding, and straightening. * Repair or replace fiberglass, plastic, and aluminum components. * Conduct frame and alignment corrections using appropriate equipment. Surface Preparation & Painting * Prepare truck bodies and parts for priming and painting (sanding, masking, filling, blending). * Apply primer, basecoat, clearcoat, and specialty coatings per OEM specifications. * Operate spray guns and paint-booth equipment safely and effectively. * Ensure proper curing, paint matching, and final finish quality. Mechanical/Component Work * Remove and reinstall mechanical components, electrical parts, lighting systems, mirrors, and trim as needed for body repairs. * Inspect and test repaired vehicles to verify safety and functionality. Documentation & Compliance * Complete repair orders, parts requisitions, and labor time documentation accurately. * Follow safety protocols, OSHA guidelines, and environmental regulations. * Work with estimators, service managers, and insurance adjusters on repair scope. Shop & Equipment Care * Maintain tools, equipment, and work areas in clean, safe condition. * Assist with inventory of bodywork materials and supplies. * Contribute to workflow efficiency and teamwork in the shop. QualificationsRequired * 2+ years of body shop experience (diesel, commercial, or heavy-duty preferred). * Strong knowledge of metalwork, welding, panel repair, sanding, and refinishing. * Ability to read repair estimates, diagrams, and OEM specifications. * Valid driver’s license; ability to move commercial vehicles within the lot. Preferred * Experience with medium/heavy-duty trucks (Hino, International, Freightliner, etc.). * I-CAR, ASE, or welding certifications. * Frame repair and fiberglass experience. * CDL (not required, but a plus). Physical Requirements * Ability to lift up to 75 lbs. * Standing, bending, climbing, and working in various shop conditions. * Use of PPE (respirators, gloves, welding masks, etc.). $24-28/hour Union benefits 6:00am-2:30pm 40 hours a week

Job DescriptionJob Title: Quality Systems Technician Location: Brooklyn - NY Reports to: Quality Systems Manager Employment Type: Full-Time, Non-ExemptAbout Strike Force Staffing At Strike Force Staffing, we connect top talent with leading employers across industries. Our team specializes in matching skilled professionals with opportunities where they can thrive. We are currently seeking a dedicated Quality Control Technician for our client, a food manufacturing company committed to safety, compliance, and excellence.Job Summary The Quality Control Technician will uphold the SQF Food Safety & Quality Systems Programs during both production and non-production hours. This role ensures strict compliance with GMP standards, quality control processes, and food safety protocols. The technician will work closely with supervisors across production, packaging, warehouse, and sanitation to monitor, verify, and document adherence to quality and safety standards.Key Responsibilities • Operate and calibrate metal detectors, conduct hourly verifications, and report deviations., • Manage Quality Control Points (QCPs) and GMP adherence., • Monitor refrigeration and freezer temperatures., • Conduct product evaluations with supervisors across shifts., • Verify compliance with oven, packaging, and lot number checks in Safety Chain., • Perform operational walk-throughs of production areas (warehouse, shipping, freezer, staging, etc.)., • Oversee sanitation compliance, PPE usage, and allergen changeover verification., • Conduct audits, environmental testing, and allergen tests as required., • Document non-conformities, update SQF logs, and maintain accurate production records., • Coach, train, and mentor quality systems technicians and operators.Qualifications & Competencies, • Strong integrity and adherence to compliance., • Effective verbal communication in one-on-one and group settings., • Sound judgment and decision-making skills., • Ability to coach, train, and develop team members., • Prior food manufacturing, quality, or SQF systems experience strongly preferred.FULL-TIME/PART-TIME: Full-Time SALARY: $19 - $22 per hourSHIFT: First Shift AVAILABILITY: Open AvailabilityNUMBER OF OPENINGS: 1ENVIORMENT: Extreme temperatures (hot/cold), food handlingLOCATION: Strike Force Staffing- Brooklyn, NY DEPARTMENT: Quality Control

Job Description Title: Low Voltage Structured Cable Technician Level 2 Location: Long Island, NY Coranet Corp. is seeking a Low Voltage Structured Cable Technician Level 2 to join their Field Service teams. The Technician will work under our Lead Cable Technicians and supervise Level 1 Technicians on Coranet's IT infrastructure technician teams to entirely and successfully install low-voltage projects, including structured cabling, access control, physical security, wireless, AV projects, and programming Security, AV, and WiFi systems throughout Long Island with work extending into New Jersey and Metro NY region. Candidates should be based on Long Island. Responsibilities: • Installation and Testing:, • Install, terminate, label, and test copper (CAT5e/CAT6) and fiber (single mode/multi mode) cables., • Dress-in, terminate, label, and test copper patch panels., • Perform patching according to customer-provided switch matrices., • Work with General Contractors and other project trades such as electrical, furniture, carpet, etc., • Receive and inventory drop-shipped project materials., • Provide moderate supervision and guidance to Level 1 Technicians. Must have demonstrated experience: • with copper and fiber [single mode/multi mode] cable: rough-in, labeling, terminations, and testing., • with copper patch panel: dress-in; terminations; labeling; and, testing., • with Fluke Networks [or equivalent] copper/fiber cable tester/analyzer., • in working with General Contractors and other project trades, e.g., electrical, furniture, carpet, etc., • with the receipt and inventory of drop-shipped project materials., • with LAN rack: assembly; grounding; cable runways; cable tray; etc., • Valid driver's license, • Access to a motor vehicle and willingness to travel across NJ, PA, etc., • Finger and wrist dexterity, hand/eye coordination., • Ability to work from heights using proper fall protection., • Proficiency with small hand tools and power tools., • Ability to climb stairs, ladders, and/or scaffolds., • Physical ability to walk, stand, bend, lift up to 50 lbs., and drive a vehicle., • Available for off-hour assignments - weekends and nights., • Certifications, e.g., CommScope, Corning, etc., • Capable of operating with minimal supervision., • Willing to travel, work on remote teams while onsite performing project-driven initiatives, • Job is usually performed in indoor/outdoor environments under multiple environmental conditions., • Ability to accept periodic assignments that involve travel away from the immediate district office area based on client needs, business needs, and project scope., • Exposure to noisy or dusty conditions; chemicals & solvents; mechanical, electrical, and/or other hazards., • Must be able to work in the United States.

Job Description Salary: $70,000 - $75,000 Other Forms of Compensation: Pay Grade: 10 Crothall Healthcare is a Compass One Company that provides specialized, high-quality, innovative, and responsive support services exclusively to the healthcare industry. Crothall serves many of the Top 100 Hospitals throughout its over 1300 healthcare service teams in 46 states. Crothall has been recognized as one of Modern Healthcare’s Best Places to Work and Best Places to Work in Pennsylvania since 2013 and Becker's Top 150 Places to Work since 2016. A division of Compass Group USA, we have more than 26,000 team members. Our core services include: Environmental Services, Healthcare Technology Solutions, Patient Transportation, Laundry & Linen, Facilities Management, and Ambulatory EVS. Learn more at . Job Summary Working as an Operations Manager - Sterile Processing, you will be responsible for directing and leading all aspects of the operational needs of the sterile processing department. You will coordinate the tasks of the department associates, as well as assist in staff training and development. You will serve as a liaison between administration and hospital departments and deliver the highest possible level of service. Key Responsibilities: • Prioritizes, directs, and coordinates all sterile processing functions and activities, • Interprets policies, procedures, standards, and regulations as is appropriate to personnel/nursing and medical staff, • Performs duties of Central Supply technician as needed. Prepares work schedules, assigns personnel, evaluates work performance, and makes recommendations for personnel action, • Maintains established departmental policies, procedures, objectives, Quality Assurance program, safety, environmental, and infection control standards, • Coordinates Central Supply/Services with operating room functions and nursing unit/area functions and other user departments in order to provide services promptly and efficiently, • Sterilizes instruments, equipment, and supplies as the need arises; handles and stores these items appropriately, • Maintains the cleanliness of work areas as required, • Supervises the requisitioning, sorting, labeling, and issuance of professional equipment, • Coordinates sterilization, assembly, and storage of medical supplies and equipment, • Ensures staff compliance with sterilization techniques, policies, and procedures, • Supervises, trains, and evaluates the performance of staff, • Prioritizes, schedules, assigns, and monitors work of the staff to optimize operational service, • Ensures sterilization activities are accurately detailed and participates in the maintenance of department recordsPreferred Qualifications:, • High School Diploma or GED required; Bachelor’s degree preferred, • 2 to 3 years of progressively responsible experience in Central Sterile operations unit or similar work required, • CRCST applicable sterile processing certification required, • Good work ethic, drive, and initiative for quality and customer service, • Ability to communicate effectively in written format and oral presentations with all levels in the organization, • Excellent problem-solving skills both one-on-one and in group situations, • Exhibits initiative, responsibility, flexibility and leadership; experience managing and training hourly staff, • Ability to function appropriately under stressful conditions Crothall is a member of Compass Group USA Click here to Learn More about the Compass Story Associates at Crothall are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Flexible Time Off, • Holiday Time Off (varies by site/state), • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs), • Paid Parental Leave Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. We encourage applicants with a criminal history (and driving history) to apply. Applications are accepted on an ongoing basis. Crothall maintains a drug-free workplace. Req ID: 1465109 Crothall Healthcare JANELLE C. ALLEN [[req_classification]]

Job Description Salary: $70,000 - $75,000 Other Forms of Compensation: Pay Grade: 10 Crothall Healthcare is a Compass One Company that provides specialized, high-quality, innovative, and responsive support services exclusively to the healthcare industry. Crothall serves many of the Top 100 Hospitals throughout its over 1300 healthcare service teams in 46 states. Crothall has been recognized as one of Modern Healthcare’s Best Places to Work and Best Places to Work in Pennsylvania since 2013 and Becker's Top 150 Places to Work since 2016. A division of Compass Group USA, we have more than 26,000 team members. Our core services include: Environmental Services, Healthcare Technology Solutions, Patient Transportation, Laundry & Linen, Facilities Management, and Ambulatory EVS. Learn more at . Job Summary Working as an Operations Manager - Sterile Processing, you will be responsible for directing and leading all aspects of the operational needs of the sterile processing department. You will coordinate the tasks of the department associates, as well as assist in staff training and development. You will serve as a liaison between administration and hospital departments and deliver the highest possible level of service. Key Responsibilities: • Prioritizes, directs, and coordinates all sterile processing functions and activities, • Interprets policies, procedures, standards, and regulations as is appropriate to personnel/nursing and medical staff, • Performs duties of Central Supply technician as needed. Prepares work schedules, assigns personnel, evaluates work performance, and makes recommendations for personnel action, • Maintains established departmental policies, procedures, objectives, Quality Assurance program, safety, environmental, and infection control standards, • Coordinates Central Supply/Services with operating room functions and nursing unit/area functions and other user departments in order to provide services promptly and efficiently, • Sterilizes instruments, equipment, and supplies as the need arises; handles and stores these items appropriately, • Maintains the cleanliness of work areas as required, • Supervises the requisitioning, sorting, labeling, and issuance of professional equipment, • Coordinates sterilization, assembly, and storage of medical supplies and equipment, • Ensures staff compliance with sterilization techniques, policies, and procedures, • Supervises, trains, and evaluates the performance of staff, • Prioritizes, schedules, assigns, and monitors work of the staff to optimize operational service, • Ensures sterilization activities are accurately detailed and participates in the maintenance of department recordsPreferred Qualifications:, • High School Diploma or GED required; Bachelor’s degree preferred, • 2 to 3 years of progressively responsible experience in Central Sterile operations unit or similar work required, • CRCST applicable sterile processing certification required, • Good work ethic, drive, and initiative for quality and customer service, • Ability to communicate effectively in written format and oral presentations with all levels in the organization, • Excellent problem-solving skills both one-on-one and in group situations, • Exhibits initiative, responsibility, flexibility and leadership; experience managing and training hourly staff, • Ability to function appropriately under stressful conditions Crothall is a member of Compass Group USA Click here to Learn More about the Compass Story Associates at Crothall are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Flexible Time Off, • Holiday Time Off (varies by site/state), • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs), • Paid Parental Leave Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. We encourage applicants with a criminal history (and driving history) to apply. Applications are accepted on an ongoing basis. Crothall maintains a drug-free workplace. Req ID: 1465926 Crothall Healthcare JANELLE C. ALLEN [[req_classification]]

Job Description Salary: $70,000 - $75,000 Other Forms of Compensation: Pay Grade: 10 Crothall Healthcare is a Compass One Company that provides specialized, high-quality, innovative, and responsive support services exclusively to the healthcare industry. Crothall serves many of the Top 100 Hospitals throughout its over 1300 healthcare service teams in 46 states. Crothall has been recognized as one of Modern Healthcare’s Best Places to Work and Best Places to Work in Pennsylvania since 2013 and Becker's Top 150 Places to Work since 2016. A division of Compass Group USA, we have more than 26,000 team members. Our core services include: Environmental Services, Healthcare Technology Solutions, Patient Transportation, Laundry & Linen, Facilities Management, and Ambulatory EVS. Learn more at . Job Summary Working as an Operations Manager - Sterile Processing, you will be responsible for directing and leading all aspects of the operational needs of the sterile processing department. You will coordinate the tasks of the department associates, as well as assist in staff training and development. You will serve as a liaison between administration and hospital departments and deliver the highest possible level of service. Key Responsibilities: • Prioritizes, directs, and coordinates all sterile processing functions and activities, • Interprets policies, procedures, standards, and regulations as is appropriate to personnel/nursing and medical staff, • Performs duties of Central Supply technician as needed. Prepares work schedules, assigns personnel, evaluates work performance, and makes recommendations for personnel action, • Maintains established departmental policies, procedures, objectives, Quality Assurance program, safety, environmental, and infection control standards, • Coordinates Central Supply/Services with operating room functions and nursing unit/area functions and other user departments in order to provide services promptly and efficiently, • Sterilizes instruments, equipment, and supplies as the need arises; handles and stores these items appropriately, • Maintains the cleanliness of work areas as required, • Supervises the requisitioning, sorting, labeling, and issuance of professional equipment, • Coordinates sterilization, assembly, and storage of medical supplies and equipment, • Ensures staff compliance with sterilization techniques, policies, and procedures, • Supervises, trains, and evaluates the performance of staff, • Prioritizes, schedules, assigns, and monitors work of the staff to optimize operational service, • Ensures sterilization activities are accurately detailed and participates in the maintenance of department recordsPreferred Qualifications:, • High School Diploma or GED required; Bachelor’s degree preferred, • 2 to 3 years of progressively responsible experience in Central Sterile operations unit or similar work required, • CRCST applicable sterile processing certification required, • Good work ethic, drive, and initiative for quality and customer service, • Ability to communicate effectively in written format and oral presentations with all levels in the organization, • Excellent problem-solving skills both one-on-one and in group situations, • Exhibits initiative, responsibility, flexibility and leadership; experience managing and training hourly staff, • Ability to function appropriately under stressful conditions Crothall is a member of Compass Group USA Click here to Learn More about the Compass Story Associates at Crothall are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Flexible Time Off, • Holiday Time Off (varies by site/state), • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs), • Paid Parental Leave Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. We encourage applicants with a criminal history (and driving history) to apply. Applications are accepted on an ongoing basis. Crothall maintains a drug-free workplace. Req ID: 1474091 Crothall Healthcare JANELLE C. ALLEN [[req_classification]]

This position is under the direct supervision of the Housekeeping Supervisor or designee.

Job DescriptionPosition Summary: We are seeking a highly skilled and experienced Refrigeration Technician to join our team at a busy commercial truck dealership. The ideal candidate will have a minimum of 5 years’ hands-on experience working with Carrier and Thermo King transport refrigeration systems. This position is responsible for diagnosing, servicing, and repairing refrigeration units on commercial trucks and trailers. Key Responsibilities: * Diagnose and troubleshoot Carrier and Thermo King refrigeration systems * Perform routine maintenance, repairs, and installations on reefer units * Inspect components, such as compressors, evaporators, and electrical systems * Perform refrigeration system recovery, evacuation, and recharging * Ensure work is completed to manufacturer standards and customer expectations * Maintain accurate service records and work orders * Provide clear communication with service advisors and customers * Adhere to all safety and environmental regulations Qualifications: * Minimum 5 years of experience working with Carrier and Thermo King transport refrigeration units * EPA 608 Certification (Type II or Universal) preferred * Valid driver’s license with a clean driving record * Strong mechanical and electrical diagnostic skills * Ability to work independently and efficiently in a fast-paced environment * Excellent attention to detail and commitment to quality work * Strong communication and customer service skills Preferred Skills: * OEM training or certification with Carrier and/or Thermo King * CDL (Commercial Driver’s License) a plus * Familiarity with diesel engine systems and trailer repair * Basic computer skills for diagnostic tools and software Gabrielli Truck Sales is an Equal Opportunity Employer. We value a diverse and inclusive working atmosphere. In furtherance of our culture, all qualified applicants will receive consideration for employment without regard to pregnancy, race, national origin, gender, age, religion, disability, sexual orientation, veteran status, marital status or any other characteristics protected by law. Gabrielli Truck Sales provides reasonable accommodations for employees and applicants with disabilities or pregnant consistent with applicable law. If you need a reasonable accommodation during the application process, please let us know. Benefits: • Medical and Dental plan, • Paid Holidays, • Paid vacation and sick/personal time, • 401k with an employer match, • EMPLOYER Paid Life insurance benefit, • Gym Reimbursement program

As a Environmental Services Technician, you will be responsible for managing waste collection and recycling efforts, including: collect and dispose of waste materials.

The Environmental, Health, and Safety Technician will be responsible for managing, improving, tracking, consult and maintain programs, initiatives and engagement related to site safety, health, environmental, and site security to protect employees and the environment as well as support compliance wi

Environmental Field Technician Job Duties: Collect water samples from raw, semi-processed, or processed water, industrial wastewater, or water from other sources to assess pollution problems. Conduct bacteriological or other

Job Type: Support Staff - Union.Hours Per Week: Sunday - Thursday, 7:30 am - 4:00 pm.The salary of the finalist selected for this role will be set based on a variety of factors, including but not limited to departmental budgets, qualifications, experience, education, licenses, specialty, and trainin

Job Description JOB TITLE: Motor Assistance Vehicle (MAVT)/ Motor Assistance Vehicle Operator (MAVO) REPORTS TO: Operations Manager WAGE/HOUR STATUS: Nonexempt The Motor Assistance Vehicle Technician/Operator (MAVT/MAVO) is responsible for all aspects of patients’ care within the scope of certification. This position transports ambulatory patients to and from residences and/or skilled nursing facilities to medical treatments and/or appointments in a professional and caring manner. All employees of Mass Transportation Services LLC are expected to act with integrity, support organizational goals, communicate in a clear and respectful manner, championing the needs of our patients & staff and drive continuous improvement. QUALIFICATIONS: Required: • High School graduate or GED from an accredited institution, • Valid and clean driving record, • Clear and valid NJ commercial driver’s license (CDL), • Current MAVT/MAVO Certification, • Ability to receive and give verbal instructions clearly and effectively, • Ability to work as a team, • Ability to multi-task, • Ability to maintain customer-oriented attitude and emotional control under stress MAJOR RESPONSIBILITIES AND DUTIES: • Safely load, secure and unload wheelchaired-bound patients, • Provide patients with emergency care as needed by utilizing appropriate techniques and equipment, • Must be able to push, pull and turn wheelchair with patients into and out of facilities following appropriate protocols, • Document patient information, condition, and care, • Operate and drive company vehicle in conjunction with applicable safety policies and laws, • Maintain all required physical and computerized logs, worksheets, files, and reports, • Perform all other duties as assigned. WORKING CONDITIONS: The usual and customary methods of performing the job’s functions require the following physical demands: physical mobility, prolonged sitting, repetitive hand and arm motions, carrying, pushing, and/or pulling and lifting up to 200 pounds. Able to drive long distances daily. Mental demands: Maintain emotional control, ability to effectively communicate. Environmental Conditions: Work outside and inside; moderate exposure to extreme temperature (hot and cold) and vehicle fumes. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The foregoing statements describe the general purpose and responsibilities assigned to this job and are not an exhaustive list of all responsibilities and duties that may be assigned or skills that may be required.

CENTRAL STERILE PROCESSING TECHNICIAN. Central Sterile Processing Technician Certification (CRCST or equivalent) required. Crothall has almost 30,000 dedicated team members across its core services, which include: Environmental Services, Patient Transportation, Patient Observation, Facilities Manage

Geo-Technology Associates, Inc.GTA) is hiring a Geotechnical Engineering Field Technician to join our growing team in Little Ferry, NJ! This is a great opportunity for individuals looking to build a career in construction observation, geotechnical consulting, or environmental field services.In this

Job Description Position Title: Maintenance Technician (FMT-I) Reports to: Program Director About CBN: The Carter Burden Network (CBN) promotes the well-being of older adults through a continuum of services, advocacy, arts, and volunteer programs, primarily for individuals aged 60 and older living in New York City. Our mission is grounded in respect, dignity, and service — ensuring our facilities remain clean, safe, and welcoming for all participants. Position Summary: The Facilities Maintenance Technician I plays a key role in maintaining the cleanliness, safety, and operational readiness of the Carter Burden Lumcheon Club. This entry-level role ensures the center is compliant with Department of Health (DOH) and NYC Aging, formerly known as (DFTA) standards. Technicians are expected to work cooperatively, maintain a positive attitude, and uphold high standards of care for our facility and participants. Your approach to this role reflects CBN’s core values. You take pride in maintaining a clean, safe, and welcoming environment where older adults can thrive. You are dependable, self-aware, and respectful communicating with clarity, kindness, and professionalism. Through your attention to detail, flexibility, and accountability, you contribute to a team culture of trust, safety, and service excellence. Your work directly supports the dignity and well-being of the participants we serve each day. Essential Responsibilities Working closely with the Director of the Program you will translate operational goals into effective day-to-day workflows. You’ll provide clinical oversight, administrative support, and direct service delivery to ensure the team meets performance standards and regulatory requirements. Your role includes: • Maintain daily cleanliness of restrooms,office spaces,kitchen,hallways, stairs,patio, front of the buildingand dining areas, • Clean/disinfect high-touch areas and surfaces throughout shift, • Sweep and mopall spaces mentioned abovedaily, • Conduct mandatory restroom sanitation routine2 times a day,mid day, andbeforeendo of shift, • Set up and break down tables and chairs as neededfor meal serving or events, • Assistwith dish bussing, kitchen cleanliness, and other food service support, • Replace basic fixtures such as light bulbs, • Ensure all floors and surfacesremaincontamination-free, • Report facility issues or safety concerns to supervisors promptly, • Maintain courteous, respectful interactions with older adults and staff, • Organize andmaintaininventory of Pantry, • High school diploma or equivalent preferred, • Minimum 6 months to 1 year of custodial or maintenance experience preferred, • Ability to lift 50lbs, climb ladders, bend, stoop, and stand for extended periods, • Passion and sensitivity for CBN’s mission, • Respect for older adults and a team-oriented approach, • Basic understanding of cleaning and sanitation procedures, • Ability to safely use cleaning products and equipment, • Familiarity with DOH/DFTA sanitation guidelines (will train), • Effective communication in Englishrequired; Spanish preferred, • Punctuality & ReliabilityConsistently arrives on time andcompletesassigned tasks without constant supervision., • Team CollaborationWorks cooperatively with coworkers and supports a positive teamenvironment,especiallywhenthere isa shortageof staff., • Attention to DetailMaintainshigh standardsof cleanliness and notices when areas need extra care., • Respect forOlder AdultsInteracts with participants in a courteous, patient, and professional manner. The Maintenance Technician does not directly supervise any staff. Position Type, Work Schedule This full-time, non-exempt role at the 8arter Burden Luncheon Club. Set 8-hour shifts (short shift on Wednesday) will fall between 7:00 a.m. and 5:00 p.m., Friday through Tuesday, with a 1-hour unpaid lunch break (approximately 32 hours weekly. You must remain fully accessible during scheduled hours via phone (3cx) and email, aligned with program service needs. Physical Requirements This position is based in a multi-level, commercial church building located in East Harlem and requires the physical ability to perform routine custodial and maintenance duties throughout a four-floor facility. The physical requirements listed below are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions. Physical Demands include but are not limited to: • Frequent walking, bending, kneeling, and climbing stairs or ladders., • Ability to stand and move continuously for extended periods (up to 8 hours)., • Regular lifting andcarrying ofsupplies, furniture, and equipment (up to 50lbs)., • Manual dexterity and grip strengthsufficienttooperatebasic tools and custodial equipment such as mops, floor buffers, vacuums, and hand tools., • Ability to reach overhead and work in confined spaces or under sinks and counters., • Visual and auditory ability toidentifyhazards, hear alarms, and communicate effectively., • Indoor work with occasional exposure to outdoor conditions (e.g., for trash removal or snow/ice clearing). This role offers an hourly rate between $17.25- $18.95, the annualized base is $31,395 to $34,489 per year; this role is OT eligible, in full compliance with the NYC Pay Transparency Act, with final placement based on experience, skills, and internal equity. We offer a generous benefits package that includes multiple health and dental plan options (including 100% employer-paid coverage), 15 vacation days, 4 personal days, 10 sick days, and paid holidays. Additionally, employees are enrolled in a 403(b) retirement plan featuring a 3% employer contribution and the opportunity for a matched contribution after one year. Our supportive culture encourages professional development through training, mentorship, and growth opportunities. How to Apply Please submit your resume, highlighting your relevant experience, qualifications, and accomplishments to Sharon Zeisel, Program Director, Carter Burden Luncheon Club, that includes a resume that outlines your experience, accomplishments and interest in the role. Applicants who meet the position requirements will be contacted by a member of our search committee. Candidates advancing in the process will be asked to provide contact information for three professional references, including at least one former supervisor, and to complete a pre-hire background screening.