Environmental technician jobs in Irvington, New JerseyCreate job alerts

Job Description COME JOIN OUR TEAM! Titan Corp seeks maintenance technicians for growing property management company. Benefits include: Medical, Dental, Vision, 401K, and Paid Time off. The role of Maintenance Technician is to provide proper maintenance for the community, along with providing excellent customer service to all residents and prospects. Maintenance Technicians must wear complete uniform with I.D. badge when working on any Titan Corp. property at all times, including nights and weekends. Essential Duties include the following (other duties may be assigned): 1. Complete all service requests within 24 hours, unless it requires extraordinary parts or labor., 2. Keep maintenance shop in a clean and orderly manner., 3. Monitor and operate compactor., 4. Help maintain grounds and streets free of litter., 5. Keep uniform and personal appearance clean and neat., 6. Maintain all amenity areas., 7. Assist Community Director with unusual projects as necessary to maintain smooth property operation., 8. Maintain all project directional signs, making sure they are clean, painted, and straight., 9. Monitor recycling containers. Keep them clean and items separated., 10. Call Community Director or Maintenance Supervisor before you are going to be out of work for any reason., 11. Monitor guidelines for vacant, office, and common areas., 12. Responsible for checking and replacing any defective or burned out light bulbs or security lights. Light inspections to be done one or two times per week., 13. Serve maintenance "on call" as necessary., 14. Perform other duties as assigned by the Community Director and/or Maintenance Supervisor. While performing the above responsibilities and assignments, you may be required to perform tasks that will require a great amount of physical exertion. Listed below are common requirements for your duties as Maintenance Technician for Titan: · Use various hand tools and test equipment; these items may vary in weight from a few ounces to 40 pounds. · Use a 30-pound can of refrigerant for servicing of air-conditioners. · Hand-carry and use a 70-pound refrigerant recovery unit. · Hand-carry and install air-conditioning compressors weighing from 40 pounds to 120 pounds, depending upon the size of the condensing unit · Hand-carry and install air-conditioning condenser units weighing 100 to 250 pounds. · Hand-carry and install furnace / forced air unit weighing up to 90 pounds. · Hand-carry and install hot water heaters weighing between 70 and 90 pounds. · Hand-carry and install commode/closet combination weighing 40 to 50 pounds. · You will be required to climb ladders in order to clean leaves out of gutters and do roof repairs. Ladders required to perform this task will range from 16 to 40 feet in length and range in weight from 20 to 125 pounds. You will be required to lift and transport these ladders. · Make sure preventative maintenance is done on all weight room equipment. · Use of a ladder is required to change light bulbs in breezeways and on buildings. These ladders could range in weight from 10 to 125 pounds. · Changing panels of glass ranging in weight from 10 to 40 pounds is require and may require the use of a ladder to accomplish the task. · Pool maintenance is a big responsibility and often requires you to lift and / or transport 100-pound drums of granular chlorine, 50-pound drums of stick chlorine, and 50-pound bags of soda ash or bicarbonate of soda. You are responsible for replacing pool pump room motors and pumps. These pumps and motors could range from 25 to 200 pounds, depending on the size required. · As part of your daily maintenance routine, you may be required to move appliances from one apartment to another apartment on opposite ends of the community. The appliance may have to be transported by means of a hand truck up one to three flights of steps. These appliances will range in weight from 75 to over 200 pounds. · Our commercial laundry rooms are equipped with single washing machines and / or stacked (double) clothes dryers, which you will be required to move in order to repair and perform preventative maintenance. These machines range in weight from 120 to 150 pounds. · On occasion, you will be required to move furniture from one model unit to another or move furniture items in a resident's apartment to accomplish certain repairs or to correct flood damage. This would require that you move items weighing several pounds to several hundred pounds. · During the course of your job, you may be involved in repairs to the building structure. You may be required to move or transport a number of different building type materials weighing several pounds to several hundred pounds · At certain times you will be required to perform maintenance on special equipment (i.e., exercise equipment, gas grills, golf carts, car washes, amenity areas, and security gates). All of these functions require different physical exertion and their weight depends on the particular equipment (usually in excess of 100 pounds) · You will be required to perform certain resident service functions or make upgrades to the apartment. An example would be to install track lighting or ceiling fans. Both duties would require the work to be done using a stepladder and require lifting with two hands. In addition to the above, you will be required to lift and transport other items pertaining to maintenance (weighing up to 200 pounds) for the smooth operation of the property. Customer Service Responsibilities: · Communicate clearly to the residents, both verbally and in writing. · Read and / or listen to resident requests / concerns. · Receive resident concerns in a calm and open manner. Qualifications: Special Skills Required . Must be CMRT (Certified Maintenance and Reliability Technician) certified. Must be EPA (Environmental Protection Agency) certified. Must be CPO (Certified Pool Operator) certified. · Must have a sense of pride about a job well done, be courteous and tactful, and have a commitment to quality work. · Must be clean cut, neatly dressed, and wear the proper uniform each day. · Must have good character and background that can stand up under a thorough background check. · Must take and pass a drug-screening test. Must be able to pass an agility test. · Must be able to communicate to residents, both verbally and in writing, and receive residents' concerns in a calm and open manner. · Must have dependable transportation capable of carrying tools and parts to ensure an efficient use of time to provide proper building maintenance. · Must have a valid driver’s license. Knowledge · General property operations: · Safety · Heating and A/C · Plumbing · Pool Care · Electrical · Carpentry · Appliance / Equipment Repair · Wallpaper / Painting

Job Description Benefits: • Health care insurance (medical, dental, vision), • Life Insurance, • Supplemental Insurance, • PTO, • 401K matching, • Sick leave Job Summary: Responsible for compounding non-sterile pharmaceutical preparations under the supervision of the compounding pharmacist. Job Activities and Responsibilities: The responsibilities listed below are subject to change. • Compounding technicians shall have knowledge of and follow applicable Standard Operating Procedures., • Specifically noting the use of hormones and other potentially hazardous chemicals are used in non-sterile compounding., • Non-sterile compounding may include but is not limited to the compounding of capsules, liquids, topical medications, nasal preparations, suppositories, troches, or tablet triturates., • Position requires close attention to detail., • Standards for accuracy and potency shall be consistently met., • Compounding technician shall compound medication, fill and label prescriptions and pre-package bulk compounded medications in anticipation of prescription orders., • Compounding technicians shall also monitor inventory levels for re-order of low inventory or expiring or expired chemicals or compounds, receive new inventory, maintain MSDS and Certificates of Analysis and perform daily, weekly and monthly cleaning using appropriate disinfectants and techniques., • When working with hazardous or non-hazardous chemicals, the Compounding technician shall be familiar with the location of MSDS and review, as needed., • Environmental monitoring and validation testing shall be performed according to policies and procedures., • Technicians shall work under the supervision of a pharmacist. Minimum qualifications: • Must be registered with the State Board of Pharmacy., • Strong hand-eye coordination, • High school diploma or general education degree (GED) required, • Ability to work quickly and accurately under time and volume constraints Physical requirements: • Proficient in using a computer and related equipment, including printers and fax machines., • Ability to sit or stand for extended periods., • Effective communication skills via telephone and email., • Capable of lifting up to 40 pounds as needed., • 20/20 vision (with or without corrective aids) required for visual inspection of drug products, in accordance with legal requirements Revelation Pharma is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Job Description This position is located in Weehawken, NJ Pay is commensurate with experience. Must live onsite. About Company: RHO Residential is a premier property management company specializing in Class-A luxury apartment communities, with a primary focus on the New Jersey market. Our comprehensive services include leasing, marketing, financial management, maintenance operations, and resident relations, all tailored to deliver exceptional living experiences. We prioritize a people-first approach, fostering meaningful connections with residents and property owners alike. At RHO Residential, we are dedicated to maintaining high standards of property upkeep, optimizing operational efficiency, and maximizing property value for our partners. With a focus on promoting a positive workplace culture, we ensure our team feels empowered, valued, and inspired to deliver outstanding results. Whether it’s through innovative marketing strategies, proactive maintenance, or seamless communication, we are committed to creating vibrant, thriving communities where people love to live and work. Ready to be part of something exceptional? Join our team at RHO Residential and help us redefine property management with passion, purpose, and people at the heart of everything we do! About the Role: The Maintenance Supervisor at RHO RESIDENTIAL LLC plays a critical role in ensuring the operational excellence and safety of residential properties within the New Jersey area. This position is responsible for overseeing all maintenance activities, coordinating with vendors and contractors, and leading a team of maintenance technicians to deliver timely and high-quality service. The supervisor will implement preventive maintenance programs to minimize downtime and extend the lifespan of building systems and equipment. Additionally, the role requires close collaboration with property management to address tenant concerns and maintain compliance with safety and regulatory standards. Ultimately, the Maintenance Supervisor ensures that all properties under management remain safe, functional, and aesthetically pleasing to enhance tenant satisfaction and property value. Minimum Qualifications: • High school diploma or equivalent required; technical certification or associate degree in facilities management, building maintenance, or related field preferred., • Minimum of 3 years of experience in maintenance supervision or a similar role within residential property management., • Strong knowledge of building systems including HVAC, electrical, plumbing, and general construction., • Proven ability to lead and manage a team effectively., • Certification in HVAC, electrical, plumbing, or facilities management (e.g., CFM, HVAC Technician Certification)., • Experience with computerized maintenance management systems (CMMS) and property management software., • Knowledge of local building codes and environmental regulations in New Jersey., • Project management experience related to property maintenance or capital improvements., • Supervise and coordinate daily maintenance operations across multiple residential properties to ensure efficient and effective service delivery., • Lead, train, and evaluate maintenance staff, fostering a productive and safety-conscious work environment., • Develop and implement preventive maintenance schedules for HVAC, plumbing, electrical, and other building systems to reduce emergency repairs and prolong equipment life., • Manage relationships with external contractors and vendors, including negotiating contracts and overseeing work quality and timelines., • Respond promptly to tenant maintenance requests and emergencies, ensuring timely resolution and clear communication., • Maintain accurate records of maintenance activities, inspections, and compliance with safety regulations. The Maintenance Supervisor utilizes technical skills daily to diagnose and resolve complex building system issues, ensuring minimal disruption to residents. Leadership and communication skills are essential for managing the maintenance team, coordinating with vendors, and effectively addressing tenant concerns. Organizational skills are applied to develop preventive maintenance schedules and maintain detailed records for compliance and budgeting purposes. Problem-solving abilities enable the supervisor to respond swiftly to emergencies and unexpected repairs, maintaining property safety and functionality. Additionally, proficiency with maintenance management software enhances workflow efficiency and supports data-driven decision-making.

Job DescriptionPosition Summary The Body Shop Technician is responsible for performing high-quality bodywork, structural repairs, and refinishing on medium- and heavy-duty diesel trucks. This role ensures damaged fleet and customer vehicles are restored to safe, functional, and aesthetic condition in accordance with OEM standards, insurance requirements, and company quality expectations. Key ResponsibilitiesBody & Structural Repairs * Diagnose and repair structural damage on truck cabs, frames, bumpers, hoods, and panels. * Perform metal fabrication, cutting, welding, grinding, and straightening. * Repair or replace fiberglass, plastic, and aluminum components. * Conduct frame and alignment corrections using appropriate equipment. Surface Preparation & Painting * Prepare truck bodies and parts for priming and painting (sanding, masking, filling, blending). * Apply primer, basecoat, clearcoat, and specialty coatings per OEM specifications. * Operate spray guns and paint-booth equipment safely and effectively. * Ensure proper curing, paint matching, and final finish quality. Mechanical/Component Work * Remove and reinstall mechanical components, electrical parts, lighting systems, mirrors, and trim as needed for body repairs. * Inspect and test repaired vehicles to verify safety and functionality. Documentation & Compliance * Complete repair orders, parts requisitions, and labor time documentation accurately. * Follow safety protocols, OSHA guidelines, and environmental regulations. * Work with estimators, service managers, and insurance adjusters on repair scope. Shop & Equipment Care * Maintain tools, equipment, and work areas in clean, safe condition. * Assist with inventory of bodywork materials and supplies. * Contribute to workflow efficiency and teamwork in the shop. QualificationsRequired * 2+ years of body shop experience (diesel, commercial, or heavy-duty preferred). * Strong knowledge of metalwork, welding, panel repair, sanding, and refinishing. * Ability to read repair estimates, diagrams, and OEM specifications. * Valid driver’s license; ability to move commercial vehicles within the lot. Preferred * Experience with medium/heavy-duty trucks (Hino, International, Freightliner, etc.). * I-CAR, ASE, or welding certifications. * Frame repair and fiberglass experience. * CDL (not required, but a plus). Physical Requirements * Ability to lift up to 75 lbs. * Standing, bending, climbing, and working in various shop conditions. * Use of PPE (respirators, gloves, welding masks, etc.). $24-28/hour Union benefits 6:00am-2:30pm 40 hours a week

Job Description Our Pest Control Technicians work closely with residents and supervisors at multi-family housing to tackle pest problems and put our customer's mind at ease. As a Pest Control Technician, you will identify pest problems and recommend pest control programs using your expertise and the latest in pest control technology. You will communicate procedures, sanitation and structural corrections with residents and management supervisors all while providing the highest-level quality of service. Essential duties and responsibilities: • Inspect and treat for pests, pest harborage, and pest entries., • Follow all safety procedures and instructions throughout every step of the process., • Travel to residences and apartment complexes and inspect for pests., • Build and maintain customer relationships., • Maintain your vehicle and all equipment at a high standard of cleanliness and maintenance., • Complete all paperwork and route logs accurately and timely., • Respond to customer and client requests in a timely manner., • Maintain high service standards at all times., • Take personal initiative and responsibility for correcting pest problems., • Suggest and sell services that meet customer needs., • Participate in group meetings and account reviews., • Complete ongoing independent and group training., • You have previous outdoor working experience including maintenance, construction or other physical work experience., • You have 6 years of driving experience with a clean driving record., • You can pass a pre-employment screenings and checks., • You can satisfactorily complete initial technical training and State Certification and Licensing requirements., • You will participate in regular in-house workshops to improve your skills and learn new methods and techniques., • You are comfortable working with insects and various animals in a variety of environmental conditions and confined spaces., • You can perform the physical requirements of this role including standing, walking, climbing, lifting, bending, reaching, crawling, squatting and moving around., • You work well independently and as part of a team., • You communicate effectively, both orally and in writing., • You have a team mentality with the ability to work independently., • You are reliable and punctual for all work assignments., • Education and /or experience:, • High School diploma or General Education Degree.

Job DescriptionBenefits: • Dental insurance, • Health insurance Must have: Blue seal Refrigeration Toxic License/Seal & Black Seal Steam License/Seal Job Description Maintains the following equipment: Ammonia refrigeration system, Freon packaged refrigeration units and building heating and air conditioning equipment, high pressure steam boiler systems, hot water generator, compressed air systems, electrical distribution equipment, building sprinkler systems, and any other supporting equipment as directed by management. Performs duties as assigned by the Facility Manager and/or Gold Seal Ensures continuous operation of all the facility utility systems and peripheral equipment to support the requirements of the production schedule and facility conditions. This requires proper coordination of all operations and maintenance utilities equipment. Coordinates both internal and external resources for maintenance of the facility. Assists in the record-keeping and training requirements for all components of the Process Safety Management/Risk (PSM/RMP management plans to achieve compliance with state and federal guidelines. Performs preventative maintenance on equipment to maintain in good working condition. Utilizes drawings, technical records, and vendor diagrams to complete Preventative Maintenance documents (PMs) related to machine overhauls and repairs. Performs other duties as assigned. WHAT'S ON THE MENU Provides technical analysis and services to provide real-time data on the status of refrigeration and operational equipment. Takes a leadership role on the emergency response team in the event of release of hazardous chemicals. Assures the ammonia compressors are operating safely and efficiently to reduce energy consumption. NECESSARY INGREDIENTS High school diploma or GED required. Knowledge of equipment set-up, functions, operating procedures, and preventative maintenance techniques. Basic knowledge in programmable logic controllers (PLCs) preferred. Demonstrated knowledge and application of best practices in maintenance and safety management. Knowledge of state and federal regulatory requirements as related to plant and utilities systems operations, safety, and environmental agencies. Knowledge of best available energy management practices and procedures. Ability to read and interpret work orders, operating manuals, and maintenance instructions in English. Ability to complete forms detailing maintenance work performed. Requires

This position is under the direct supervision of the Housekeeping Supervisor or designee.

The Environmental, Health, and Safety Technician will be responsible for managing, improving, tracking, consult and maintain programs, initiatives and engagement related to site safety, health, environmental, and site security to protect employees and the environment as well as support compliance wi

In addition, the Technician may be asked prepare test reports and data in accordance with Acceptance Test Procedures (ATP) and may help write Acceptance Testing Procedures. Test thermal, shock, vibration and environmental tests, troubleshooting/problem solving, debugging of moderate problems by usin

Job Description JOB TITLE: Motor Assistance Vehicle (MAVT)/ Motor Assistance Vehicle Operator (MAVO) REPORTS TO: Operations Manager WAGE/HOUR STATUS: Nonexempt The Motor Assistance Vehicle Technician/Operator (MAVT/MAVO) is responsible for all aspects of patients’ care within the scope of certification. This position transports ambulatory patients to and from residences and/or skilled nursing facilities to medical treatments and/or appointments in a professional and caring manner. All employees of Mass Transportation Services LLC are expected to act with integrity, support organizational goals, communicate in a clear and respectful manner, championing the needs of our patients & staff and drive continuous improvement. QUALIFICATIONS: Required: • High School graduate or GED from an accredited institution, • Valid and clean driving record, • Clear and valid NJ commercial driver’s license (CDL), • Current MAVT/MAVO Certification, • Ability to receive and give verbal instructions clearly and effectively, • Ability to work as a team, • Ability to multi-task, • Ability to maintain customer-oriented attitude and emotional control under stress MAJOR RESPONSIBILITIES AND DUTIES: • Safely load, secure and unload wheelchaired-bound patients, • Provide patients with emergency care as needed by utilizing appropriate techniques and equipment, • Must be able to push, pull and turn wheelchair with patients into and out of facilities following appropriate protocols, • Document patient information, condition, and care, • Operate and drive company vehicle in conjunction with applicable safety policies and laws, • Maintain all required physical and computerized logs, worksheets, files, and reports, • Perform all other duties as assigned. WORKING CONDITIONS: The usual and customary methods of performing the job’s functions require the following physical demands: physical mobility, prolonged sitting, repetitive hand and arm motions, carrying, pushing, and/or pulling and lifting up to 200 pounds. Able to drive long distances daily. Mental demands: Maintain emotional control, ability to effectively communicate. Environmental Conditions: Work outside and inside; moderate exposure to extreme temperature (hot and cold) and vehicle fumes. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The foregoing statements describe the general purpose and responsibilities assigned to this job and are not an exhaustive list of all responsibilities and duties that may be assigned or skills that may be required.

Job Description About the role The primary responsibility of the Field Technician is the collection of water samples from properties with pools, lakes, and beaches throughout New Jersey. Employees are trained in proper and compliant collection techniques as well as transport protocols to a certified laboratory. Candidates must have a valid driver’s license and a clean driving record, as the position requires driving to and from sampling locations using their personal vehicle. The pay rate is $16.00 per hour for a full-time schedule, Monday through Friday. Additionally, employees will receive a reimbursement of $0.58 per mile driven. GSL offers competitive wages and benefits, including medical, dental, and vision options, disability insurance, life insurance, 401(k), paid holidays, and paid time off. Your eligibility to receive such benefits will be subject in each case to the generally applicable terms and conditions for the benefits in question. Qualifications No prior experience is required, but interested candidates must have a valid driver’s license and have access to a reliable vehicle for all scheduled days. Interest in a science-related career is a plus. About Garden State Laboratories, Inc. At Garden State Laboratories, Inc., we contribute to the protection of public health and safety. We have been a leader in environmental testing for more than 80 years. Our certified laboratories located in Union and Ocean counties are equipped for microbiology and chemistry testing of drinking water, private wells, recreational bathing water, wastewater, and solid/hazardous wastes for all of New Jersey. WHY JOIN US? At Garden State Laboratories, caring about the well-being of our employees sustainability and growth is what our family-owned business stands by. Garden State Laboratories, Inc. is a great place to work, employees join our team, and they stay. We are committed to providing an atmosphere of development and training for our employees. If you are interested in an environmental services career, this is a ground-floor entry-level role you should consider.

Job Description About the role The primary responsibility of the Field Technician is the collection of water samples from properties with pools, lakes, and beaches throughout New Jersey. Employees are trained in proper and compliant collection techniques as well as transport protocols to a certified laboratory. Candidates must have a valid driver’s license and a clean driving record, as the position requires driving to and from sampling locations using their personal vehicle. The pay rate is $16.00 per hour for a part-time schedule of 2 to 4 days a week, Monday through Friday. Additionally, employees will receive a reimbursement of $0.58 per mile driven. As a part-time employee, you may be eligible to participate in Company-sponsored health benefits. Your eligibility to receive such benefits will be subject in each case to the generally applicable terms and conditions for the benefits in question. Qualifications No prior experience is required, but interested candidates must have a valid driver’s license and have access to a reliable vehicle for all scheduled days. Interest in a science-related career is a plus. About Garden State Laboratories, Inc. At Garden State Laboratories, Inc., we contribute to the protection of public health and safety. We have been a leader in environmental testing for more than 80 years. Our certified laboratories located in Union and Ocean counties are equipped for microbiology and chemistry testing of drinking water, private wells, recreational bathing water, wastewater, and solid/hazardous wastes for all of New Jersey. WHY JOIN US? At Garden State Laboratories, caring about the well-being of our employees sustainability and growth is what our family-owned business stands by. Garden State Laboratories, Inc. is a great place to work, employees join our team, and they stay. We are committed to providing an atmosphere of development and training for our employees. If you are interested in an environmental services career, this is a ground-floor entry-level role you should consider.

Job Description Job Summary: The service technician is responsible for all aspects of service, repair, installation and maintenance of production and laboratory furnaces. This role requires delivering exceptional technical support, maintaining equipment reliability, and providing outstanding customer service to end users in manufacturing, research, and laboratory environments. Duties/Responsibilities: · Supervise and coordinate activities of service technicians performing installation, calibration, troubleshooting, and maintenance of high-temperature industrial and laboratory furnaces, including going on service calls themselves. · Manage service schedules, field assignments, and customer site visits to ensure timely response and completion of work orders. · Provide advanced technical support to resolve complex electrical and mechanical issues, both on the phone and in person. · Develop and implement preventive maintenance programs and standard service procedures. · Train and mentor service staff on equipment operation, diagnostics, safety, and customer interaction. · Coordinate with engineering, production, and quality teams to communicate field issues and recommend product or design improvements. · Ensure compliance with all safety, environmental, and company policies. · Support customer relationships by providing professional communication, technical guidance, and post-service follow-up. Required Skills/Abilities: · Associate or Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Industrial Technology, or related field (or equivalent experience). · 5+ years of hands-on experience servicing machinery; 2+ years in a supervisory or managerial capacity preferred. · Strong understanding of furnace controls, thermocouples, PID controllers, PLCs, and gas/electrical heating systems. · Proficient in reading electrical and mechanical schematics. · Excellent leadership, organizational, and communication skills. · Ability to manage multiple projects and prioritize tasks effectively. · Willingness to travel to customer sites (domestic and international) as required. · Experience with Netsuite or similar ERP system. · Ability to function well in a fast paced and sometimes stressful environment. · Proficient with Microsoft Office software. Education and Experience: · Associate or Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Industrial Technology, or related field (or equivalent experience). · 5+ years of hands-on experience servicing machinery; 2+ years in a supervisory or managerial capacity preferred. Physical Requirements: · Prolonged periods of sitting at a desk and working on a computer. · Must be able to lift up to 30 pounds at times.