Environmental technician jobs in Kansas City, MOCreate job alerts

Job DescriptionABOUT THE ROLE The Power and Control Technician position is a multi-skilled position responsible for the operation and maintenance of the electrical systems in the cement plant. WHAT YOU'LL ACCOMPLISH • Troubleshoot and repair a diverse range of electrical equipment throughout the cement plant (Example: Instrumentation circuits, motor control circuits up to 13.8 kilovolts, low and medium voltage drives, monitoring analyzers), • Schematic reading & instrumentation calibration, • Digital and Analog PLC program use in troubleshooting, • Low and medium voltage cable routing, splicing and terminating, • Basic mechanical activities (For example: Non-critical welding, laser alignment), • Perform walk-by inspections & diagnostic checks, • Maintain documentation, plan and organize work, participate in various team activities, • Other duties as assigned., • Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviours. WHAT WE'RE LOOKING FOR Required Education: High School Diploma/GED Additional Education: 2 years' electrical related experience in an industrial environment is required Required Computer and Software Skills: Effective computer and systems skills Travel Requirements: Minimal Additional Requirements: • Required to work with high voltages (up to 13.8 kV), work outside, at heights, warm temperatures and in confined spaces., • Position will be predominantly day shift but incumbent will be required to work shifts as necessary., • Ideal candidates would have a high technical aptitude, • Ability to work in a team based environment, • Experience in a heavy manufacturing environment for at least 1 year preferred., • Excellent electrical knowledge, • Familiarity with National Electrical Code for applications up to 15 kilovolts., • Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests. WHAT WE OFFER • Competitive salary, • Retirement Savings: Choose from 401(k) pre-tax and/or Roth after-tax savings, • Medical, Dental, Disability and Life Insurance, • Holistic Health & Well-being programs, • Health Savings Accounts (HSAs) & Flexible Spending Accounts (FSAs) for health and dependent care, • Vision and other Voluntary benefits and discounts, • Paid time off & paid holidays, • Paid Parental Leave (maternity & paternity), • Educational Assistance Program, • Dress for your day policy BUILDING INCLUSIVE WORKSPACES At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email . This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted.]]>

Job DescriptionDescription: Southern Home Services is a residential HVAC, Plumbing and Electrical company that acquires, owns, and operates businesses around the United States. We are seeking business leaders to join our growing team and become an integral part of our company's future. Are you ready to be Part of Something BIGGER! Mission Plumbing, Heating & Cooling, a Southern Home Services Company, is looking for a dynamic-HVAC Lead Install Technician to join a thriving business that believes in work life balance and cares about YOU! About this role: The HVAC Lead Install Technician is responsible for overseeing the installation, upgrade, and replacement of HVAC systems in residential properties. This role involves leading a team of technicians to ensure high-quality and efficient service delivery. The Lead Install Technician handles complex installations, provides technical expertise, and ensures compliance with industry standards and safety regulations. They are also responsible for customer interactions, resolving issues, and ensuring customer satisfaction. Additionally, the Lead Install Technician maintains a clean and organized work environment, manages inventory and tools, and contributes to team training and development. In this role, you will be responsible for: • Install, upgrade, and/or replace HVAC systems in residential homes with precision., • Cut, thread, and connect pipes (copper or PVC) and handle high and low voltage wiring., • Train and mentor Install Helpers on job sites and in the shop, enhancing their skills and knowledge., • Deliver exceptional customer service and communicate effectively with homeowners., • Handle physical tasks, including lifting, bending, and moving objects weighing over 50 pounds., • Maintain tools, parts, and the vehicle in an organized and clean condition., • Perform work safely at heights, in tight spaces (e.g., attics), and under various weather conditions (extreme heat or cold)., • Ensure adherence to appliance standards, the Occupational Health and Safety Act, and service standards., • 1+ year of HVAC experience, ideally within the residential market, showcasing hands-on technical skills., • Valid Driver’s License with a minimum of three years of experience, • Holds valid EPA certification for compliance with environmental regulations., • Possesses advanced troubleshooting and critical thinking skills to resolve complex HVAC issues., • Demonstrates a proactive and enthusiastic approach with a strong commitment to delivering high-quality work., • Prioritizes exceptional customer service and effectively addresses client needs and concerns., • Capable of interacting professionally with individuals at all levels within the organization., • Lifting 50 pounds regularly and up to 100 pounds occasionally, • Climbing ladders, accessing attics, navigating tight spaces, driving, entering crawlspaces, pushing, carrying, pulling, using hand tools, and performing fine detail work., • Ability to drive., • Working in various environments, including indoor and outdoor settings, attics, crawlspaces., • Ability to stand, walk and sit; talk or hear, both in person and by telephone., • Use hands to handle or feel objects or controls; reach with hands and arms., • Regularly stoop, kneel, bend, and crouch. Benefits: We offer a rewarding career path with great benefits, flexible schedules, professional and on-the-job training, and growth plans. Be a part of the team our customers call the finest in the industry. • Reliable, Year-Round Work, • Weekly Paychecks, • Paid Time Off and Paid Holidays, • Comprehensive Medical, Dental and Vision Benefits, • Health savings accounting, • Flexible spending account, • Growth Opportunities, • Employee discounts, • Company paid short term life insurance, • Life insurance Southern Home Services is an equal opportunity employer committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. The policy applies to all employment practices within our organization. Requirements:

Job DescriptionDescription: Southern Home Services is a residential HVAC, Plumbing and Electrical company that acquires, owns, and operates businesses around the United States. We are seeking business leaders to join our growing team and become an integral part of our company's future. Are you ready to be Part of Something BIGGER! Mission Plumbing Heating and Cooling, a Southern Home Services Company, is looking for a dynamic-Commercial HVAC Lead Install Technician to join a thriving business that believes in work life balance and cares about YOU! About this role: The HVAC Lead Install Technician is responsible for overseeing the installation, upgrade, and replacement of HVAC systems in residential properties. This role involves leading a team of technicians to ensure high-quality and efficient service delivery. The Lead Install Technician handles complex installations, provides technical expertise, and ensures compliance with industry standards and safety regulations. They are also responsible for customer interactions, resolving issues, and ensuring customer satisfaction. Additionally, the Lead Install Technician maintains a clean and organized work environment, manages inventory and tools, and contributes to team training and development. In this role, you will be responsible for: • Install, upgrade, and/or replace HVAC systems in commercial homes/buildings with precision., • Cut, thread, and connect pipes (copper or PVC) and handle high and low voltage wiring., • Train and mentor Install Helpers on job sites and in the shop, enhancing their skills and knowledge., • Deliver exceptional customer service and communicate effectively with homeowners., • Handle physical tasks, including lifting, bending, and moving objects weighing over 50 pounds., • Maintain tools, parts, and the vehicle in an organized and clean condition., • Perform work safely at heights, in tight spaces (e.g., attics), and under various weather conditions (extreme heat or cold)., • Ensure adherence to appliance standards, the Occupational Health and Safety Act, and service standards., • 1+ year of HVAC experience, ideally within the commercial market, showcasing hands-on technical skills., • Valid Driver’s License with a minimum of three years of experience, • Holds valid EPA certification for compliance with environmental regulations., • Possesses advanced troubleshooting and critical thinking skills to resolve complex HVAC issues., • Demonstrates a proactive and enthusiastic approach with a strong commitment to delivering high-quality work., • Prioritizes exceptional customer service and effectively addresses client needs and concerns., • Capable of interacting professionally with individuals at all levels within the organization., • Lifting 50 pounds regularly and up to 100 pounds occasionally, • Climbing ladders, accessing attics, navigating tight spaces, driving, entering crawlspaces, pushing, carrying, pulling, using hand tools, and performing fine detail work., • Ability to drive., • Working in various environments, including indoor and outdoor settings, attics, crawlspaces., • Ability to stand, walk and sit; talk or hear, both in person and by telephone., • Use hands to handle or feel objects or controls; reach with hands and arms., • Regularly stoop, kneel, bend, and crouch. Benefits: We offer a rewarding career path with great benefits, flexible schedules, professional and on-the-job training, and growth plans. Be a part of the team our customers call the finest in the industry. • Reliable, Year-Round Work, • Weekly Paychecks, • Paid Time Off and Paid Holidays, • Comprehensive Medical, Dental and Vision Benefits, • Health savings accounting, • Flexible spending account, • Growth Opportunities, • Employee discounts, • Company paid short term life insurance, • Life insurance Southern Home Services is an equal opportunity employer committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. The policy applies to all employment practices within our organization. Requirements:

Job Description HVAC Service Technician Kansas City, Kansas Our client has decades of experience servicing HVAC clients in the mid-west. This is a great opportunity to join a growing team of highly skilled professionals who provide exceptional service and maintain the highest industry standards. If you are a skilled HVAC Service Technician looking to join a reputable company that values professionalism and customer satisfaction, we encourage you to apply. This contractor prides itself on building strong careers for its employees and treats everyone like family! Job Overview: We are seeking an experienced and reliable HVAC Service Technician to join our team. This is a Non-Union position. The HVAC Service Technician will serve commercial clients. Responsibilities: • Diagnostic Skills: Perform thorough assessments of HVAC systems to identify issues, malfunctions, or potential problems., • Repairs and Maintenance: Execute repairs, replacements, or adjustments to HVAC components, including compressors, motors, thermostats, and other parts, to restore proper system functionality., • Installation: Install new commercial HVAC systems or components as needed, ensuring proper setup, alignment, and compliance with manufacturer specifications and local codes., • Preventive Maintenance: Conduct routine maintenance tasks, such as cleaning, lubricating, and inspecting HVAC systems to prevent breakdowns and extend equipment life., • Refrigerant Handling: Handle refrigerants safely and adhere to all environmental regulations and guidelines., • Customer Service: Interact with customers in a professional and courteous manner, addressing their questions, explaining necessary repairs, and providing recommendations for system improvements., • Documentation: Maintain accurate records of all service and maintenance work performed, including equipment history and service reports., • Safety: Follow safety protocols and guidelines to ensure a safe working environment for yourself and others., • Continual Learning: Stay updated on the latest industry trends, technologies, and regulations through ongoing training and professional development. Requirements: • High school diploma or equivalent; HVAC certification or vocational training required., • Proven experience as an HVAC Service Technician, with a minimum of 3-5 years in the field., • Strong knowledge of HVAC systems, components, and troubleshooting techniques., • Proficient in using HVAC diagnostic tools and equipment., • Ability to read and interpret technical manuals and schematics., • Excellent problem-solving and communication skills., • Valid driver's license with a clean driving record., • Willingness to work flexible hours, including evenings and weekends, as needed., • Physical ability to lift heavy equipment and work in various weather conditions., • Strong commitment to safety and adherence to safety guidelines. Benefits: • Competitive salary, • Health, dental, and vision insurance, • Retirement savings plan, • Paid time off and holidays, • Ongoing training and development opportunities, • Company vehicle

Entity: Gas & Low Carbon Energy Job Family Group: Operations Group Job Description: About Archaea bp is committed to investing in lower carbon energy so we can meet our ambition to reach net zero by 2050. And while we’re still mostly in oil and gas today, bioenergy is one of our five transition growth engines and a key focus to help us support the global energy transition. Archaea Energy, a bp company, is a leader in landfill gas to energy and the largest renewable natural gas (RNG) producer in the US. With big ambitions, we specialize in the development, construction and operation of RNG, landfill-gas-to-electric and dairy digester facilities. The team operates around 50 sites in 32 states with a robust development pipeline. Introductory Employment Period Your employment with Archaea will begin with an introductory period of 90 days, starting from your first day of work. The introductory period is intended to support your transition into the role and provide an opportunity for both you and the Company to ensure a strong mutual fit. During this time, we’ll work together to assess how your performance, conduct, and reliability align with the expectations of the position and the values of our organization, while also offering guidance and feedback to help you succeed. During this time, your supervisor will evaluate your ability to meet the expectations of your role, including but not limited to: • Consistent and timely attendance, • Quality and accuracy of work, • Ability to meet deadlines and productivity standards, • Adherence to company policies and procedures and the bp Code of Conduct, • Professional behavior and collaboration with team members and management At the conclusion of the introductory period, your performance will be reviewed. If you successfully demonstrate satisfactory performance consistent with the criteria set forth above, your continued at-will employment will be confirmed. If, however, you do not successfully demonstrate performance consistent with the criteria set forth above, your employment with Archaea will be terminated at the end of the probationary period. Note that, your employment with Archaea is at-will both during the probationary period and if you successfully complete the probationary period. At-will means that either you or Archaea may terminate your employment at any time, with or without cause, and with or without prior notice. About the role The Wellfield Technician is responsible for the overall safe operation, maintenance, and performance of a landfill gas wellfield. Key accountabilities • Responsible for the operation of the wellfield during the assigned shift in the most efficient and productive method to maintain compliance with the site-specific Title V Operating Permit, Standard Operating Procedures (SOP's) and prescribed safety and environmental standards as well as compliance with applicable state, federal and local rules, and regulations., • Maintains daily logs and obtains readings in accordance with prescribed standards., • Follows all plant and landfill safety policies and procedures. Uses required personal protective equipment at all times and performs all duties in a safe and efficient manner. (safety shoes, safety vest, hearing protection, safety glasses, gloves, chemical protection and H2S monitoring equipment)., • Maintains a clean workspace including the plant building, control room, rest room, break room and grounds., • Writes routine reports and correspondence., • Performs landfill tuning duties by recording and storing data as required., • Adjusts/tunes wellfield as required to maximize gas quantity and quality., • Maintains wellfield data base and associated logs to meet regulatory and corporate compliance requirements., • Documents wellhead readings, coordinates, communicates, and verifies corrective actions in order to maintain continuous compliance., • Observes applicable safety and environmental regulations while performing assigned tasks. *, • Assists supervisory staff with operational planning of construction projects and gas collection field expansions., • Ensures project compliance with government rules, regulations, the site-specific Title V Permit and NSPS guidelines., • Responds to callouts in a timely manner and works overtime as required., • Maintains cleanliness and upkeep of the facility all-terrain vehicle., • Ensures that all analytical equipment calibrations and recordkeeping is current., • Acquires knowledge of all gas collection equipment., • Performs analytical tests and documents as required, example: Calibration of data collection and gas analysis instruments. Essential education Requires a High School Diploma or equivalent. Essential experience • Intermediate Electrical, Chemical and Mechanical experience., • Previous landfill gas operation experience a plus, minimum of 1-3 years in landfill gas processing, chemical plant operations, industrial gas operations, or power plant operations or equivalent., • Understanding of process control systems as applied to landfill gas collection and processing., • Knowledge of basic math, gas chemistry, piping and instrumentation drawings., • Ability to read blueprints and follow established procedures with minimal amount of general supervision (i.e., work independently)., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Demonstrated use of a calculator to perform the above calculations is sufficient., • Ability to write routine reports and correspondence., • Ability to speak effectively to employees of the organization., • Ability to solve practical problems and deal with a variety of concrete variables., • Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form., • Proficient using computers (experience using MS Word, Excel, and email systems), • Ability to work outdoors year-round in rugged terrain., • Previous landfill and or gas processing experience., • Must possess a valid driver’s license, must pass background check, physical, hearing and DOT drug test. Desirable criteria • 3+ years’ experience in landfill gas processing, or power plant operations., • Any technical certification or training is a plus Why join us? Delivering a better and more balanced energy system requires many different approaches and solutions. All of us have a part to play. We aim to support our people to learn and grow in an inclusive environment in which everyone is respected and treated fairly. So, if you have the right skills, commitment and courage to help us invest in today’s energy system and build out tomorrow’s, apply today! How much do we pay (Base)? $24 - $27/hour *Note that the pay range listed for this position is a genuinely expected and reasonable estimate of the range of possible base compensation at the time of posting. This position offers paid vacation depending on your years of relevant industry experience and will range from 120 – 240 hours of vacation per year for full times employees (60 - 240 hours of vacation per year for part time employees). You will also be eligible for 9 paid holidays per year and 2 personal choice holidays. You may learn more about how we calculate paid vacation and view our generous vacation and holiday schedules at benefits@bp. Bp has a parental leave policy as well, which offers up to 8 weeks’ paid leave for the birth or adoption of a child. Learn more at benefits@bp. Join our industry-leading team and you’ll receive a reward and wellbeing package to enable your work to fit with your life. These include, but are not limited to: · Quarterly Momentum Bonus · 401K Program · Health, Vision, And Dental Insurance · Life Insurance · Short-Term Disability · Long-Term Disability But above all? You’ll play a key part in helping bp deliver our ambition – to be a net zero company by 2050 or sooner and help the world get to net zero. Apply today! Travel Requirement No travel is expected with this role Relocation Assistance: This role is not eligible for relocation Remote Type: This position is not available for remote working Skills: Control of Work, Cost-conscious decision-making, Maintenance general, Procedures and practices, Reliability general, Risk Management, Safety Leadership, Turnaround general Legal Disclaimer: We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, socioeconomic status, neurodiversity/neurocognitive functioning, veteran status or disability status. Individuals with an accessibility need may request an adjustment/accommodation related to bp’s recruiting process (e.g., accessing the job application, completing required assessments, participating in telephone screenings or interviews, etc.). If you would like to request an adjustment/accommodation related to the recruitment process, please ___. If you are selected for a position and depending upon your role, your employment may be contingent upon adherence to local policy. This may include pre-placement drug screening, medical review of physical fitness for the role, and background checks.

Job Description Facilities Maintenance Technician Pay Rate: 30/hr | Temp-to-Perm | Vehicle & Gas Card Provided We are seeking an experienced Facilities Maintenance Technician to join our team in Kansas City. This role offers a competitive hourly rate, company vehicle, and gas card, with the opportunity to transition to a permanent position. The ideal candidate will have hands-on experience maintaining, repairing, and troubleshooting commercial building systems, and will be confident working across multiple trades including mechanical, electrical, plumbing, and HVAC. Responsibilities: * Perform maintenance and monitor repairs on Mechanical, Plumbing, Structural, Furniture, Fire, Life Safety, and Control systems to ensure facilities meet applicable standards. * Travel between multiple facilities to ensure proper operation of building systems. * Oversee facility services, preventative maintenance, purchasing, inventory control, contracted maintenance, and general maintenance. * Clean, inspect, calibrate, and change parts to maintain HVAC systems and related equipment at peak performance. * Record readings and adjust systems as needed for optimal operation. * Safely store, use, and dispose of hazardous materials in compliance with departmental policy. * Perform periodic checks of tool and instrument inventory. * Monitor quality and cost of maintenance work performed by outside contractors. * Maintain compliance with all safety procedures, promote safe work practices, and recognize and resolve safety hazards. * Ensure good housekeeping and organization of all work areas. Qualifications: * High School Diploma or Equivalent. * 5–7 years of experience in commercial building maintenance and repair. * Skilled in analyzing and troubleshooting mechanical, electrical, plumbing, and HVAC systems. * EPA 608 Type II Certification (required). * Working knowledge of Microsoft Word and Excel. * Valid driver’s license. Preferred Qualifications: * EPA 608 Universal Certification. * Two years of trade schooling in electrical system design, refrigeration, and HVAC. * Experience with multi-facility maintenance in a commercial or industrial setting. This is an excellent opportunity for a skilled maintenance professional looking for a stable role with long-term growth potential. Pay Details: 30.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Company DescriptionSince 1977, the PDS family of companies has become among the largest and most respected staffing companies in the United States. A vital part of the PDS family, PDS Tech Commercial connects highly skilled employees with Fortune 500 clients’ needs for project support such as contingent labor, statement of work/offload engineering projects, and permanent placements. PDS Tech Commercial has staffing partnerships with leading organizations based in the United States and globally. We hire jobseekers daily for openings across skill categories, including Engineering, IT, Business Professional, Administrative, Accounting/Finance, Skilled Trades and Industrial. We offer eligible associates an ala carte benefits package, that can include direct deposit, free career counseling, 401(k), select paid holidays, short-term disability insurance, skills training, employee referral bonuses, and an affordable medical coverage plan. Now part of The Adecco Group, our shared synergies combined with the investment Adecco continues to make in PDS offers significant advantages to both clients and associates alike. We share Adecco’s dedication to unlocking our Associates’ potential by unleashing the Future@Work and to the importance of human and labor rights, diversity and inclusion, environmental responsibility, and more.Since 1977, the PDS family of companies has become among the largest and most respected staffing companies in the United States. A vital part of the PDS family, PDS Tech Commercial connects highly skilled employees with Fortune 500 clients’ needs for project support such as contingent labor, statement of work/offload engineering projects, and permanent placements.\r\n\r\nPDS Tech Commercial has staffing partnerships with leading organizations based in the United States and globally. We hire jobseekers daily for openings across skill categories, including Engineering, IT, Business Professional, Administrative, Accounting/Finance, Skilled Trades and Industrial.\r\n\r\nWe offer eligible associates an ala carte benefits package, that can include direct deposit, free career counseling, 401(k), select paid holidays, short-term disability insurance, skills training, employee referral bonuses, and an affordable medical coverage plan.\r\n\r\nNow part of The Adecco Group, our shared synergies combined with the investment Adecco continues to make in PDS offers significant advantages to both clients and associates alike. We share Adecco’s dedication to unlocking our Associates’ potential by unleashing the Future@Work and to the importance of human and labor rights, diversity and inclusion, environmental responsibility, and more.

Job DescriptionABOUT THE ROLE The Cement Technician position is a multi-skilled position responsible for the operation and industrial maintenance of the cement plant. WHAT YOU'LL ACCOMPLISH • Practice and promote safety in such way as including but not limited to: Assessing risks before starting tasks, only performing authorized activities, utilizing proper PPE, • Exercise and encourage core values including but not limited to: developing self and coaching others by inspiration and empowerment., • Perform walk-by inspections & checklists on operating process plant, • Perform industrial maintenance activities, make repairs, installations and replacements on a wide variety of equipment (Example: rigging, cutting, welding, fitting, lubrication, alignments, basic low voltage electrical repairs, housekeeping, hydraulics, pneumatics, operate light and medium sized plant mobile equipment), • Troubleshoot and optimize equipment during operation and mechanical breakdowns; mechanical maintenance., • Maintain documentation, plan and organize work, participate in various team activities, • Other duties as assigned, • Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviors. WHAT WE'RE LOOKING FOR Required Education: High School diploma or equivalent Required Work Experience: 1 year of experience in a heavy manufacturing environment Additional Requirements: • Required to work outside, at heights, warm temperatures, and at times around and over water, in dusty environments and confined spaces., • Must be able to work any shift as required, • Ideal candidates would have a high mechanical aptitude, • Ability to work in a team based environment, • Prior experience in Mechanical Maintenance or Industrial Maintenance preferred, • Successful candidates must adhere to all safety protocols and proper use of Holcim approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests. WHAT WE OFFER • Competitive salary, • Retirement Savings: Choose from 401(k) pre-tax and/or Roth after-tax savings, • Medical, Dental, Disability and Life Insurance, • Holistic Health & Well-being programs, • Health Savings Accounts (HSAs) & Flexible Spending Accounts (FSAs) for health and dependent care, • Vision and other Voluntary benefits and discounts, • Paid time off & paid holidays, • Paid Parental Leave (maternity & paternity), • Educational Assistance Program, • Dress for your day BUILDING INCLUSIVE WORKSPACES At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email . This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted.]]>

Job Description Who are we? Jet Midwest is a full-service commercial aviation company, specializing in the sale and lease of commercial aircraft, engines, and parts as well as aircraft maintenance, repair, and overhaul services to the aviation industry. This position is located at the Kansas City International Airport Area, in the former TWA Overhaul Base facility. We are looking for a motivated, high-energy team member to join our Materials Operations Team. Position Description: Title: Facilities Maintenance Technician Status: Full Time Department: Materials Operations Summary: The Facilities Maintenance Technician is responsible for researching, negotiating, and securing terms and pricing for services related to the inspection, repair, maintenance, and overhaul of aircraft parts. You will track and manage your assigned orders through the repair process to ensure customer expectations for on time delivery are met or exceeded. The ideal candidate for this role will have a broad understanding of procurement “best practices” and strong familiarity with sourcing repair services for aftermarket aviation parts from a 145 MRO environment or similar. To be successful, you’ll need to deploy excellent research, negotiation and prospecting skills, organizational skills, and a service-focused mindset daily. Essential Duties & Responsibilities included, but limited to: • Ensure Jet Midwest facilities and equipment are maintained at a high level of operational readiness and safety, • Ensure top-notch support and assistance with maintenance tasks, • Support team with daily work assignments, vendor communication, work ticketing system, grooming and progress reporting, preventive maintenance checklist reviews, and related tasks, • Perform inspections, preventive maintenance, and corrective maintenance on the facility, included but not limited to, ground support equipment, company tooling, safety equipment, and building systems, • Work from ladders, scaffolds, and roofs to install, maintain, or repair the same, • Operate motorized lift equipment such as scissor lift, forklift, etc., • Perform and support hot work/welding and fabrication tasks, • Other duties as assigned, • Professional communication, • Microsoft Office, • Rapport building, • Customer service, • Time management, • Project management, • A high-energy personality and desire to learn and grow quickly, • Excellent communication skills, • Equally comfortable self-directing or working as part of a team to ensure tasks are completed, • Basic math and measurement skills, • Worked with a CMMS/Work ticketing systems, • Strong knowledge of safety, OSHA, Hazmat, and Environmental Health Hazards, • Must possess a valid driver's license, • A High School Diploma or equivalent, • Have experience performing systems maintenance and troubleshooting on industrial equipment, • Have 0-1 years of experience and knowledge of the following:, • Overhead garage doors maintenance, • General plumbing, • General carpentry While performing the responsibilities of Facilities Maintenance Technician, you will be performing work in a variety of interior and exterior conditions and will be required to wear appropriate safety equipment (may include respirators). The job will require the ability to frequently bend, reach, left, climb stairs/ladders and/or work high off the ground, stand, or walk for extended periods of time, work in tight/closed-in spaces, grasp tools and parts, and crouch/or crawl. At times, some lifting may be required, up to 50 lb. This job posting is intended to convey information essential to understanding the scope of the Facilities Maintenance Technician position and is not intended to be an exhaustive list of knowledge, skills, ability, efforts, duties, responsibilities, or working conditions associated with the position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. EOE M/F/D/V Benefits: • Eligibility for our comprehensive benefits program starting the 1st of the month after 30 days of full-time employment, • 401K with company match, • Robust Paid Time Off, • 10 paid Holidays, • Growth opportunities

Job DescriptionDescription: The HVAC & General Property Maintenance Technician is a dual-skilled professional responsible for maintaining HVAC systems and performing a wide variety of general property maintenance tasks at multi-family residential properties. This role ensures tenant satisfaction by keeping properties functional, safe, and visually appealing while adhering to safety and compliance standards. Requirements: Key Responsibilities: HVAC Maintenance: • Inspect, troubleshoot, and repair HVAC systems, including furnaces, air conditioners, boilers, and heat pumps, ensuring optimal performance and energy efficiency., • Conduct preventive maintenance such as cleaning coils, replacing filters, lubricating components, and checking refrigerant levels per manufacturer specifications., • Respond promptly to HVAC-related maintenance requests, diagnose issues using diagnostic tools, and determine appropriate repair actions., • Install new HVAC systems or components, adhering to building codes and regulations., • Perform plumbing, electrical, and mechanical repairs, including diagnosing and addressing system malfunctions., • Conduct carpentry tasks such as repairing or replacing doors, windows, cabinets, and flooring., • Address tenant maintenance requests promptly, prioritizing tasks based on urgency., • Perform painting and patching to maintain or enhance property aesthetics., • Maintain the exterior of the property, including landscaping tasks such as mowing, trimming, and debris removal., • Handle seasonal maintenance like snow and ice removal and clearing walkways., • Safety and Compliance:, • Conduct regular inspections to identify hazards, ensure compliance with safety regulations, and mitigate risks., • Adhere to all local building codes and environmental standards., • Recordkeeping and Communication:, • Maintain detailed records of maintenance activities, materials used, and inspections performed., • Communicate effectively with property management, tenants, and team members regarding maintenance needs and project updates., • Other Responsibilities:, • High school diploma or equivalent; HVAC certification is required., • Proven experience in HVAC maintenance and general property maintenance., • Strong understanding of building systems, equipment, and repair techniques., • Proficiency in using diagnostic tools, hand tools, and power tools., • Ability to interpret technical manuals, schematics, and blueprints., • Strong problem-solving skills with attention to detail., • Excellent communication and interpersonal skills., • Physical ability to lift heavy objects, climb ladders, and work in varying weather conditions. Traveling between the property garage and job sites for parts and repairs. Procuring repair materials from local stores (e.g., Home Depot or Lowe’s). Mileage reimbursement provided per company policy for work-related travel. Compensation: Competitive salary with a generous benefits package. Job Type: Full-time Schedule: 8-hour shift & on-call rotation. Overtime: Responsibilities may involve Over-Time to meet the changing needs of the organization. #ID25 #MT

Job DescriptionDescription: Full job description: We are looking for experienced Pest Control Technicians to join our team. Continue your career in the industry with a family-owned company that has the benefits of a corporate Fortune 500 organization. Looking for a company that will make sure you have the tools you need and a safe vehicle to service customers? Rottler might be the home and family you’ve been looking for. Top 5 Reasons why the Grass is Greener at Rottler: • We always promote within. We have a job shadow and leadership training to make sure you’re ready., • Build your own schedule. Our internal software was designed for ease and efficiency specifically for the field team., • Efficient routes. One of the perks to being an area leader is our routes are tight and allow for productive days while also providing flexibility for customer service., • Family feel. Many companies say they have this going for them, but we strive to keep it by having team outings, Rottler night at the ballpark, and other events internally all year long! As third generation family owned, we are the largest independently owned PC company in MO., • Work life balance. We want our team to have a balance in which they can be successful in their career while also making personal time a priority. Pest Control Technician duties: • Inspecting and treating for pests, pest harborage, and pest entries, • Building and maintaining customer relationships, • Maintaining high service standards at all accounts, • Taking personal initiative and responsibility for correcting pest problems, • Suggesting and selling services to meet customer needs, • Participation in group meetings and account reviews, • Completion of independent and group ongoing training, • Being an interactive member in team environment, • Ability and willingness to work flexible hours, • Have worked 3 or more years in the pest control industry, • Have experience using computers and smartphones, • Possess the physical ability to setup, use and work off of 12 foot+ extension ladders, • Be able to lift and carry up to 50 pounds, • Read and understand product labels printed in English, • Possess a valid driving record that meets Company standards (minimum of 5 years driving experience), • Show a stable work history, • Work independently and as part of a team, • Work with insects and various animals in a variety of environmental conditions and confined spaces, • Pass a respirator fit test and may require Dept. of Transportation physical, • Pass a pre-employment drug test, motor vehicle, and criminal background check, • Must be capable of wearing a respirator, • Willingness to be on-call during off work hours (typically less than 5 times a year), • Immigration sponsorship not available for this role Rottler provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description Many employers offer jobs; at Boise Cascade, we offer career opportunities. We are one of the largest manufacturers of plywood and engineered wood products in North America and are the only wholesale stocking distributor for building products that can service the entire United States. We offer a wide range of entry-level careers for new workers and advanced career opportunities for seasoned professionals. Our broad national footprint provides opportunities in many career fields including sales, technical design/drafting, engineering, maintenance, I/T, administrative, production, warehousing and distribution and CDL truck driving. We welcome diverse backgrounds, views, and skills as we believe it results in stronger teams, inspired solutions, and greater agility as an organization. Boise Cascade has an exciting opening for a Millwork Service Technician! Please review the responsibilities and needed qualifications below and apply today! Responsibilities • Conducts and visits job sites where inspections are required., • Communicate at a high level with customer regarding claim status., • Performs physical labor and utilizes tools in order to deliver superior outcomes (i.e., new, used, rebuilt parts)., • Communicates with production on necessary repairs., • Timely escalates claims more than authority level to management for review., • Ensure timely, accurate and consistent file documentation., • Anticipates and meets all customer needs., • May conduct door install classes., • May travel to job site for replacement and/or repair of warranty work., • Demonstrate strong commitment to safety, quality, environmental awareness, and continuous process improvement. Basic Qualifications: HS Diploma, GED or two (2) years equivalent work experience. Requires clean driving record. Preferred Qualifications: Typically more than five (5) years of experience in related job function. About Boise Cascade Boise Cascade has been in the business of manufacturing wood products and distributing building materials for over half a century. Today we're one of the largest manufacturers of plywood and engineered wood products in North America – and the only wholesale stocking distributor for building products that can service the entire United States. Because our business is built on relationships, our associates are critical to our success. And we're committed to investing in them. That's why we offer a comprehensive benefits package designed to have a positive impact on all areas of your life – from health and well-being, career and community, to financial security and personal safety, with many benefits beginning on your first day of employment. We call it, Total Rewards. Here's a snapshot of what we offer: Our Benefits • Medical + Prescription Drug, • Dental + Vision, • Flexible Spending Accounts (Healthcare + Dependent Care), • 401(k) Retirement Savings with company contribution, • Paid Time Off (20 days per year), • Paid Holidays (10 per year), • Paid Parental Leave (6 weeks), • Life Insurance

Job Description Refrigeration Technician Lab Equipment (Minimal On-Call Work!) Location: Kansas City, MO/KS Industry: Commercial HVAC & Plumbing Are you a skilled Refrigeration Technician looking for a role with less on-call work and more work-life balance? Were recruiting on behalf of a leading HVAC & Refrigeration contractor seeking a Refrigeration Technician to service lab and research facility equipment. Unlike traditional rack system work, this role offers steady hours with minimal emergency calls, making it an excellent opportunity for techs looking for stability without sacrificing pay. Why This Opportunity? Minimal On-Call Work Unlike supermarket or convenience store refrigeration, lab equipment failures are far less frequent. Consistent Work Environment Work in a controlled setting rather than unpredictable field service calls. Career Growth Work with cutting-edge refrigeration systems in the research and medical fields. Key Responsibilities: • Troubleshoot, repair, install and maintain lab refrigeration equipment such as ultra-low temperature freezers, environmental chambers, and chillers., • Perform preventative maintenance to ensure optimal system performance., • Conduct diagnostic testing to pinpoint issues and complete repairs efficiently., • Collaborate with lab managers and facility staff to minimize downtime., • Maintain accurate records of service and repair work., • Ensure compliance with EPA regulations and proper refrigerant handling. Qualifications: • 3+ years of refrigeration service experience (lab equipment experience is a plus but not required)., • Strong troubleshooting skills with electrical, mechanical, and refrigeration systems., • Ability to read schematics and technical manuals., • Valid drivers license and clean driving record., • Strong customer service and communication skills. Compensation & Benefits: • Competitive hourly wage + overtime opportunities, • Comprehensive health, dental, and vision insurance, • 401(k) with company match, • Paid time off and holidays, • Company vehicle and tools provided If you're an experienced Refrigeration Technician looking for a low-stress, high-reward opportunity with minimal on-call work, apply today! Apply now or contact us for more details!

Job DescriptionDescription: This position supports Fleet Operations. The primary responsibility of this role is to perform tire service and repair work, basic general service functions on company trucks, and other duties as required. Essential Duties and Responsibilities: The following are general responsibilities associated with the position as directed: · Install new tires and wheels on trailer and diesel trucks. · Perform maintenance on tires, including rotations, balancing, repairs, and cleaning. · Develop a system for determining equipment tire needs, reducing progressive maintenance. · Perform maintenance duties in the shop, yard, field and roadside on service calls. · Maintain a clean and safe work environment. · Ability to multi-task in a fast-paced consistent high-volume environment · Dependability in attendance is required. · Assist in tracking logs and maintaining asset management files. · Assist in working with an inventory minimum and maximum. · Repair, replace, mount and balance commercial tires (Tire Service). · Other duties may be assigned as deemed necessary by the Maintenance Supervisor or Operation Manager · Experience with heavy duty/commercial tires preferred, but not required. Requirements: Education and Experience: The minimum level of education and experience required to perform the job at a satisfactory level. · High school diploma or equivalent · Must be 18 years of age or older. · Experience as a productive and meaningful member of a commercial team Knowledge, Skills, and Abilities: The minimum level of knowledge, skills, and abilities to perform the job at a satisfactory level. · Prefer one year of previous experience as a Tire Technician · Need to understand the importance of scheduling equipment for servicing. · Must have the ability and willingness to perform the essential physical functions of the position. · Must be familiar with record keeping as it pertains to tire maintenance and D.O.T. regulations. · Must understand their own limitations and know when to ask for help. · Ability to interact cooperatively and collaboratively with others as a team, including those holding divergent and/or opposing views and goals. · Is always courteous and professional to team members both inside and outside of the Company. · Ability to learn quickly and adapt easily to change. · Strong management and communication skills. · Ability to work quickly, independently, and with confidence to handle many challenges. · Work well with others in a fast-paced, non-stop environment. · Flexibility to changing work conditions, assignments, and schedules. · Bilingual in English and Spanish helpful. · Comfortable working in an industrial environment. Safety: Environmental or atmospheric conditions commonly associated with the performance of the functions of this job. · Strictly adhere to all health, safety, and environmental standards. · Follow all safety guidelines and protocol, including wearing of all PPE. · Adhere to all local, state, OSHA, and environmental regulations. Physical Requirements: Activities that are commonly associated with the performance of the functions of this job. The physical demands described below are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. · Must have experience working on equipment that operates in harsh environments. · Must be able to work in adverse conditions (heat and cold); time is in the shop and outdoor environment. Perform a variety of manual tasks for extended periods of time, which may include light and heavy lifting, including commercial tires and wheels, standing, bending, and squatting. · Must be able to lift and/or move tires weighing between 30-250 lbs. with or without mechanical assistance. · Repetitive and sustained exertions, forceful exertions, awkward postures, mechanical stress concentrations, ADDITIONAL INFORMATION NOTE: The above statements are intended to describe the general nature and level of work being performed by people assigned to this job and are not intended to be an exhaustive list of all responsibilities, duties, and skills required. This job description does not constitute a contract of employment and the Company may exercise its employment-at-will rights at any time.

Job DescriptionDescription: Are you looking for a career that offers full-time work all year long? Rottler Pest Solutions is looking for Pest Control Technicians to service routes in the St. Louis County area. This is not a seasonal position as we provide services all 12 months of the year and we offer a fully paid, comprehensive training program that is hands-on and in the field. We're a growing, family-owned company that offers our team members opportunities for advancement so you can grow with us. Pay starts at $18/hour with no prior experience. We also offer unlimited sales commissions, company matched 401k, paid time off, the use of a company vehicle, and medical, vision, dental, life and disability insurance. Do you want to make a difference, enjoy working independently, and love being outdoors? Are you a strong problem solver and wish to use your skills to help others? If so, join our local team of service professionals and give your customers the peace of mind they need by solving their pest concerns. This is your opportunity to work with freedom and flexibility helping others without being tied to a desk. Your skills development will include company supported career advancement and state licensing. If you are self-organized, have strong communication and computer skills, excellent observation and documentation skills, and work cooperatively with others, this is an exceptional opportunity for you. Pest Control Technician duties: • Inspecting and treating for pests, pest harborage, and pest entries, • Building and maintaining customer relationships, • Maintaining high service standards at all accounts, • Taking personal initiative and responsibility for correcting pest problems, • Suggesting and selling services to meet customer needs, • Participation in group meetings and account reviews, • Completion of independent and group ongoing training, • Being an interactive member in team environment, • Have worked 3 or more years in jobs dealing with the public, • Have experience using computers and smartphones, • Possess the physical ability to setup, use and work off of 12 foot+ extension ladders, • Be able to lift and carry up to 50 pounds, • Read and understand product labels printed in English, • Possess a valid driving record that meets Company standards, • Show a stable work history, • Work independently and as part of a team, • Work with insects and various animals in a variety of environmental conditions and confined spaces, • Pass a respirator fit test and may require Dept. of Transportation physical, • Pass a pre-employment drug test, motor vehicle, and criminal background check, • For safety reasons, all Technicians ought to be clean-shaven for respirator use

Job DescriptionPURPOSE Provide technical start-up, checkout and programming for Building Automation and Control Systems. Maintain and grow the “Customer for Life” concept for existing and new customers. Performs related work as required. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be constructed as exclusive or all inclusive. Other duties may be required and assigned. • Start-up of Microprocessor based control components including DDC controllers, sensors, actuators, transducers, and associated components, • Point-to-point checkout of wiring and components for proper grounding, polarity, communication and power, • Set up and calibration of input and output devices such as temperature sensors, pressure transducers, etc., • Uploading, downloading, and modification of control software and programs, • Perform BACnet networking functions such as setting up IP addresses, subnet masks, MAC addresses and instance numbers, • Create and troubleshoot BACnet and Modbus networks, • Identify and troubleshoot HVAC and Electrical systems, • Map control points into supervisory controller and add alarms and history extensions to supervisory controller points, • Map control points into graphical front end and link points to graphics, • Create Automation System graphics and dashboards, • Understand construction schedules and manage QA/QC checklists and commissioning logs, • Ability to interpret HVAC Sequence Of Operations (SOO) and apply to DDC program logic, • Mentor, training, and oversee Automation Technician I, • Lead small to medium size projects unsupervised MINIMUM EDUCATION & EXPERIENCE REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • 3-5 years of Automation related field experience, • Associates in Electronic, Technology, or Automation related field or equivalent on the job experience CERTIFICATES, LICENSES, REGISTRATIONS • Valid driver’s license MENTAL AND PHYSICAL COMPETENCIES REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Ability to perform all necessary duties unsupervised, • Knowledge of common Windows Office applications, • Knowledge of Microsoft SQL or other database applications preferred but not required, • Knowledge of Ethernet and serial network communication formats and hardware configurations, • Understanding of basic process controls (i.e. PID control loops, motor control, commissioning of digital and analog measurement devices), • Excellent interpersonal skills with ability to communicate effectively, both orally and written, • Ability to take direction and full fill commitments, • Value and support company mission and culture, • Display honesty, integrity, sound reasoning, good judgment/values, and lead by example, all while maintaining strong internal and external relationships at all levels, • Understanding of construction site safety and display a high awareness of your surroundings, • Effectively prioritize and balance the “big picture” and immediate responsibilities, • Ability to listen effectively, value the opinions of others and acknowledge contributions of others, • Ability to communicate and work well with others specifically but not limited to our electrical team members and project management staff at all levels, • Effectively train, mentor, and delegate work tasks to lower-level Automation Technicians, • Ability to effectively work with your project team members to resolve issues promptly ENVIRONMENTAL ADAPTABILITY At any given time, may be exposed to: • Typical construction site and/or industrial site risks and environment EQUIPMENT/TOOLS • Laptop PC, • Electronic Multimeter, • Magnehelic, • RS-485 and RS-232 Serial Adapters, • Hand tools/Light power tools, • Product Manufacturer Software, • Ladders and Lifts

Job DescriptionABOUT THE ROLE The Quarry Technician position is a multi-skilled position responsible for the mining operation. WHAT YOU'LL ACCOMPLISH • Operation of mobile equipment required to mine rock (For example: Rock drills, wheel loaders, bulldozer, haul trucks and water trucks, motor grader, fuel tanker, hydraulic rock breaker), • Perform mechanical maintenance check-outs, troubleshoot mechanical breakdowns and do minor preventative maintenance on mobile equipment, • Monitor and react to quality issues (For example: sample drill holes, monitor quality feedback information & adjust mining pattern as necessary), • Maintain documentation, plan and organize work, participate in various team activities, • Other duties as assigned, • Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviors. WHAT WE'RE LOOKING FOR Required Work Experience: 1 year of a heavy equipment operating in a manufacturing environment Additional Requirements: • Required to work outside, at heights, warm temperatures, and at times around and over water, in dusty environments and confined spaces., • Must operate on a two shift basis and incumbents will predominantly work these two shifts, weekends are required., • Ability to work in a team based environment., • Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests. WHAT WE OFFER • Competitive salary, • Retirement Savings: Choose from 401(k) pre-tax and/or Roth after-tax savings, • Medical, Dental, Disability and Life Insurance, • Holistic Health & Well-being programs, • Health Savings Accounts (HSAs) & Flexible Spending Accounts (FSAs) for health and dependent care, • Vision and other Voluntary benefits and discounts, • Paid time off & paid holidays, • Paid Parental Leave (maternity & paternity), • Educational Assistance Program, • Dress for your day BUILDING INCLUSIVE WORKSPACES At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email . This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted.]]>

Citizen to apply for this job Selective Service Registration is required for males born after 12/31/1959 You may be required to serve a probationary period Subject to background/security investigation Pre-employment physical required Selected applicants will be required to complete an online onboard

Ability to sit, walk, stand, bend, and work on hand and knees for long periods of time. Please note: In this position, there is significant lifting, carrying, pushing, and/or pulling, frequent climbing and balancing, frequent stooping, kneeling, crouching, and/or crawling and significant fine fing

Environmental Services Technician (EVS Tech) - UH Truman Medical Center - PRN. Help Keep Our Hospital Clean & Safe: Join Our Team as an Environmental Services Worker!. Experience in Environmental Services:.

Job Description PURPOSE Automation Technicians will be responsible for supporting our Project Managers and System Engineers with creating, installing, and commissioning of PLC/HMI/SCADA based systems as well as network and device integration work. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be constructed as exclusive or all inclusive. Other duties may be required and assigned. • Complete start up and commissioning of new PLC/HMI/SCADA control systems, service and maintenance of existing installations, fault diagnoses, hardware repairs, programming bug fixes and alterations on customer sites, • Complete diagnosing and resolving technical problems on job sites and provide appropriate reports to Project Management or Operations Leaders via email, SharePoint, OneDrive, or other repository applications, • Attend and participate in project kickoff and turnover meetings with Project Managers to gain knowledge of project estimate, scope and finalize project completion documentation, • Organize and maintain control submittal project redlines and submit to design engineer at project conclusion for as built drawing package creation, • Work with other technicians to develop and share technical solutions, • Actively participate in technician training to maintain technical expertise on new products, tools, and integration through continuing education initiatives MINIMUM EDUCATION & EXPERIENCE REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Associate’s degree specialized in Robotics, Automation, Technology or Minimum of 3-5 years of experience with PLC/HMI control system in lieu of Associate’s degree, • Or Bachelor’s degree specialized in Technology, Engineering, Manufacturing MENTAL AND PHYSICAL COMPETENCIES REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Working knowledge of at least one PLC software (i.e. Rockwell Suite, Modicon Unity Pro or Control Expert, Mitsubishi, or many others), • Working knowledge of at least one HMI software (i.e. Rockwell FactoryTalk View or Wonderware InTouch, or many others), • Working SCADA knowledge of at least one platform (i.e. Ignition, Factory Talk View SE, Optix, GE iFix, Ecostruxure Power Operations or SCADA, and many others), • Knowledge of common Windows Office applications and Repositories (i.e. OneDrive, SharePoint, GIT), • Knowledge of Microsoft SQL or other database applications preferred but not required, • Knowledge of Ethernet and serial network communication formats and hardware configurations, • Understanding of basic process controls (i.e. PID control loops, motor control, commissioning of digital and analog measurement devices), • Excellent interpersonal skills with ability to communicate effectively, both orally and written, • Ability to travel to customer locations for overnight work approximately 25% ENVIRONMENTAL ADAPTABILITY • Prolonged periods of sitting at a desk working on a computer, • Must be able to lift 20 pounds occasionally, • Significant field and client interactions on construction job sites, which may require prolonged periods of standing, walking and/or climbing stairs, • Occasional exposure to variety of temperature and weather conditions EQUIPMENT/TOOLS • Laptop Computer Baker Group is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, Baker Group will consider reasonable accommodations for qualified individuals with disabilities and encourage prospective employees and incumbents to discuss potential accommodations with the Employer.

Job Description Job Title: Data Center Technician Pay: $22 - $30 per hour (based on experience) Job Overview: We are seeking a skilled and reliable Data Technician to join our team for a 6-month project in Kansas City, MO. The primary responsibilities for this role will include building data cabinets, racking, and stacking in a data center environment. The ideal candidate will have at least 6 months of prior experience in data center rack and stack work and will be comfortable working in a fast-paced, technical environment. This is an excellent opportunity to be part of a high-impact project while gaining hands-on experience in the data center industry. Key Responsibilities: • Rack and Stack: Install servers, switches, routers, and other hardware into server racks and cabinets. Ensure proper cable management and secure all equipment., • Data Cabinet Setup: Build and configure data cabinets, including positioning and mounting hardware in compliance with safety and organizational standards., • Cable Management: Properly route, label, and secure cables to ensure a clean, organized, and efficient data center layout., • Equipment Testing: Ensure that installed equipment is powered on and functioning correctly, and perform basic diagnostics if needed., • Data Center Maintenance: Assist with data center maintenance tasks, including monitoring temperature, power, and environmental controls., • Documentation: Accurately document the installation and configuration of hardware and any changes made to data center setups., • Experience: At least 6 months of prior data center rack and stack experience, including knowledge of data center hardware installation, cable management, and general data center operations., • Technical Skills: Basic understanding of server hardware, networking equipment, and how they integrate within a data center environment., • Physical Requirements: Ability to lift and carry equipment (up to 50 lbs), bend, kneel, and stand for extended periods of time. Comfortable working in tight spaces., • Attention to Detail: Strong attention to detail to ensure proper installation, cable management, and system configuration., • Problem-Solving Skills: Ability to troubleshoot basic hardware issues and report any problems or discrepancies to senior technicians., • Teamwork: Ability to collaborate effectively with other team members and follow instructions from senior technicians and project managers., • Previous experience working in a large-scale data center environment., • Familiarity with industry-standard data center racking systems and cabling practices., • Duration: 6-month contract position with the possibility of extension based on performance and project needs., • Work Hours: Full-time hours, Monday through Friday (with potential for overtime based on project deadlines)., • Location: Kansas City, MO, • Pay Rate: $22 - $30 per hour, based on experience. Pay: $22.00 - $30.00 per hour Schedule: Powered by JazzHR vFBboTquIW

Job DescriptionCompany Description We are Olsson, a team-based, purpose-driven engineering and design firm. Our solutions improve communities, and our people make it possible. Our most meaningful asset is our people, and we are dedicated to providing an environment where they can continue to learn, grow, and thrive. Our entrepreneurial spirit is what has allowed us — and will continue to allow us — to grow. The result? Inspired people, amazing designs, and projects with purpose. Job Description Olsson specializes in providing multidisciplinary, preliminary, and construction design services for a diverse range of land development projects, including mixed-use, commercial, and residential developments, industrial facilities, sports venues, schools, and various site development types. We are committed to positively impacting communities through innovative and sustainable solutions. As an Associate Technician, you will use CAD software for complex engineering design, attend client meetings, and prepare project cost estimates. In this role, you will also be responsible for preparing engineering and survey drawings from rough sketches and general design information. You will be expected to follow established standards and procedures and rely on your experience and judgment to perform your duties effectively. Primary Duties and Responsibilities: • Collaborate with other team members to produce high-quality engineering designs for site design projects., • Performs engineering support tasks such as gathering data, updating and maintaining computer files, preparing copies of drawings, and documenting design changes., • Use CAD software to design and layout complex engineering drawings., • Prepare engineering and survey drawings from rough sketches and general design information., • Working collaboratively with others., • Having ownership in the work you do., • Strong communication skills., • Ability to contribute and work well on a team., • Associates degree., • Minimum of 1 year of Civil 3D CAD software experience., • Passion for positively affecting communities through your work. Additional Information Olsson is a nationally recognized, employee-owned firm specializing in planning and design, engineering, field services, environmental, and technology. Founded in 1956 on the very mindset that drives us today, we're here to improve communities by making them more sustainable, better connected, and more efficient. Simply put, we work to leave the world better than we found it. As an Olsson employee, you'll receive our traditional benefits package (health care, vision, dental, paid time off, etc.), plus you'll: • Become an owner in the company after your first year through our Employee Stock Ownership Plan (ESOP), • Engage in work that has a positive impact on communities, • Receive an excellent 401(k) match, • Participate in a wellness program promoting balanced lifestyles, • Benefit from a bonus system that rewards performance Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.

Job DescriptionCompany Description $1,500 Sign on Bonus Are you looking for an opportunity that is more than a job? Plant your roots and grow with Clean Earth. Here at Clean Earth, you will have the opportunity for a career in the growing field of environmental sustainability. Clean Earth provides waste solutions to retailers, pharmacies, hospitals, government operations, harbors, manufacturers, and consumers. Clean Earth ensures a cleaner, greener planet for generations to come. You could be part of the solution! Why join Clean Earth? In addition to competitive pay, we also offer: • Health benefits available Day 1, • 401k available Day 1, • 10+ paid holidays/year, • Free HAZWOPER training and certification, • Overtime opportunities, • Ability to be cross-trained into different roles Job Description Environmental Technician II will be responsible for knowing the location and treatment for inbound waste streams. Environmental Technician II will be able to treat and process waste with onsite equipment. This includes pit mixing, drum pumping, drum dumping, and basic hi-lo and wheel loader skills. Technician must be able to complete required paperwork in accordance with our practices and procedures. Primary Responsibilities: * Complete required paperwork in accordance with our practices and procedures * Collecting samples of inbound waste for compatibility * Unload bulk liquid trucks to proper tank * Resolve and report issues with inbound loads * Operate hi-lo and end loaders in a safe manner * Have knowledge of our waste streams and their treatment protocol. * Performs other reasonably related duties as assigned by management. Qualifications Basic requirements: • 2+ years of prior experience working with hazardous materials, • Ability to operate equipment, including a forklift and pallet jack, • Ability to wear company provided personal protection equipment including eye protection, steel toed shoes, hard hat, gloves, Tyvek coveralls, and respirator, • Have the ability to read, write and speak in English, • Must be 18 years of age or older, • Proficiency with Windows based programs (i.e. Excel and Word, • Knowledge of OSHA, DOT, and RCRA Regulations, • Has the ability to operate a powered industrial truck, e.g., forklift and possesses safe driving record., • Able to work in a team environment or alone based on business needs, • Good attendance record and safe work history, • Able to operate end loader or back hoe Additional Information Clean Earth offers competitive benefits including health, dental, vision, life, and disability insurance plans starting on the first day of employment; paid time off, wellness benefits, employee discount program, tuition assistance, and a 401k with company matching. We provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, gender identity, or genetics. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. If you have a difficulty applying for any job posted on Harsco Clean Earth’s website because a disability prevents you from using the online system, Clean Earth offers the following alternate application procedure: Call toll free (833) 209-2659 and leave your name, phone number, city and state of residence. Clean Earth will arrange for an alternate method of applying and will consider your application together with all other applications received for the job. This line is dedicated to disability applications only. No other inquiries will receive a response.

Job Description Overview About Seminole Hard Rock Hotel & Casino Hollywood Seminole Hard Rock Hotel & Casino Hollywood is the flagship casino resort of Hard Rock International, owned by the Seminole Tribe of Florida. This world-renowned entertainment, gaming and hospitality destination unveiled a $1.5 billion expansion on Oct. 24, 2019. New offerings include 638 upscale guestrooms in the first-ever Guitar Hotel, 168 luxury guestrooms and unique swim-up suites in the adjacent Oasis Tower at Seminole Hard Rock Hotel & Casino Hollywood, and 465 newly redesigned guestrooms in Hard Rock Hotel for a combined room count of 1,271 throughout the resort. Additional amenities include the lush, “Bora Bora” style lagoon with private cabanas and butler service; a 42,000 square-foot Rock Spa® & Salon; a 13.5-acre recreational water experience for swimming, kayaking and paddle boarding; 19 dining outlets and 20 bars and lounges; an expansive gaming floor with 3,100 slots, 195 table games and a 45-table poker room; 120,000 square feet of premier meeting and convention space including a 38,000 square-foot, carpeted exhibition hall; and a 26,000 square-foot retail promenade. The highly anticipated Hard Rock Live entertainment venue with a 7,000-person capacity, will showcase A-list entertainers, comedy acts, Broadway performances, sporting events and live broadcast productions. The integrated resort is located on 87 acres of the Hollywood Seminole Reservation along State Road 7 (U.S. Highway 441), and is 10 minutes from Fort Lauderdale/Hollywood International Airport and 30 minutes from downtown Miami and Miami International Airport. For more information, visit us online at , call 800-937-0010 or follow us: Facebook: SeminoleHardRockHollywood, Twitter: @HardRockHolly, Instagram: @HardRockHolly. Benefits & Perks: We offer rockin' benefits that include Medical, Dental, Vision & Life Insurances, 401K, Paid time off, Annual Bonus Opportunity & much more! Please visit to see our full list of benefits! Responsibilities Under the direction of the Public space management team, the incumbent is responsible for the following: • Deep cleans, sanitizes, and maintains attractive public and employee areas., • The Floor Technician services assigned areas using provided chemicals and equipment according to the procedures and standards described in the Public Space Handbook., • Performs other duties as assigned. Qualifications High School Diploma or equivalent preferred along with (6) months previous public area cleaning experience or related experience such as custodial, janitorial or housekeeping background. Work Environment: • While performing the duties of this job, the employee is frequently required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms, talk or hear; and taste or smell. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close, distance, color, and peripheral vision, depth perception and ability to adjust focus., • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job., • The Casino environment is hectic, fast-paced and often crowded and noisy. May be exposed to casino related environmental factors including, but not limited to, second hand smoke, excessive noise and constant exposure to general public., • Must be able to communicate effectively with guests in English, specific to position duties and responsibilities. Closing: The Tribal Council gives preference in all of its employment practices to Native Americans. First preference in hiring, training, promoting and in all other aspects of employment is given to members of the Seminole Tribe who meet the job requirements. Second preference is given to members of other federally recognized Native American Tribes who meet the job requirements. As part of Seminole Gaming’s employment process, final candidates will be required to obtain gaming licensure by completing a background check with Seminole Gaming Compliance and Regulations, prior to an offer being extended. These background checks may include, but are not limited to: • Criminal Background Check, • Drug Screen Disclaimer While this is intended to be an accurate reflection of the current job, management reserves the right to revise the current job or to require that other or different tasks be performed when circumstances change, (e.g. emergencies, changes in personnel, workload, rush jobs or technical developments).

Job DescriptionJob Description: As an Environmental Plant Worker, you will learn the safe and compliant packaging and shipping of hazardous waste. You'll learn how its handled safely, where it goes, and how we help keep these materials out of landfills and water supplies. In this role, you will separate and pack hazardous material for transport and you'll be trained to complete the required documentation in accordance with our practices and procedures. The position is for the 3rd Saturday of each month from April to October. The event hours are 8:30am to 1:00pm. The staff would need to be on site at 7:00am until 3:00pm. Required: steel toe boots/shoes, long pants, work shirt, and safety glasses. Will be sorting and bulking paint. Qualifications: Our qualified candidate will have a high school diploma or GED. Preferred qualifications include: Ability to read, write, speak and understand English Ability to follow procedures and pay attention to details Ability to stand, bend, and walk for extended periods of time Warehouse experience is a plus By law, you must be 18 years of age.

Job DescriptionEssential Duties and Responsibilities: • Act as a champion and driver of Safety, while adhering to company PPE and Safety requirements., • Act as a champion and driver of Food Safety, while adhering to company GMP requirements., • Manages and schedules the QA Technician team., • Act as backup to QA technician absences as needed., • Oversees the daily QA Technician work and inspections., • Provides training, coaching, and development of the QA Technician team members., • Regularly visits other shifts, ensures all food safety and QA tasks are completed., • Manages QA department equipment, supplies /material inventories, housekeeping., • Develop and maintain lab procedures and equipment checks, verifies lab proficiency testing., • Manages required maintenance and calibration of QA Lab and QA relevant equipment., • Creates, maintains and trains on documents and records required for the SQF standards., • Develops best practices and drives continuous improvement and efficiencies for QA., • Verifies and ensures that only current product specifications and related information is in use., • Coordinates timely resampling of finished non-conforming product., • Supports the day-to-day execution of hold and release process of raw material and finished goods., • Supports the execution of the plant environmental sampling program., • Supports handling of external samples for lab testing, customers, and corporate recipients., • Supports effectiveness thorough investigation, root cause analysis, and CAPA for deviations, non-conformances or complaints. Completes related documentation and reports., • Works with and provides technical food safety and quality expertise to other plant departments., • Supports validation and qualification processes for trials, new products, equipment, and processes., • Is a (or able to become certified as) HACCP coordinator and SQF Practitioner., • Acts as a backup to the QA Manager and the Micro Coordinator as needed., • Supports QA Manager with internal and external audits and performs GMP and Facility inspections., • Supports compliance to company and regulatory requirements, certifications, documentation, standards, specifications and GMPs, • Communicates with senior management and corporate teams. Strong verbal, written, multi-tasking and presentation skills. Ability to create momentum and foster organizational change. Proficiency in MS Excel, MS Word and MS PowerPoint or equivalent software. Experience with statistical process control, ERP systems, and QMS is highly beneficial. Experience with GFSI standards preferred. Certified (or able to become certified as) HACCP and SQF Practitioner Bilingual (English/Spanish) is preferential. Travel Requirements: Travel may be required to various plant locations for meetings or other job-related functions. Occasional local travel (<20 miles) is required to external 3PL Warehouses for inspections and sampling. Work Environment/Physical Demands: Approximately 50% of work is performed in an office environment. 50% of work may involve being in the refrigerated manufacturing environment (production floor, warehouses, freezers and other storage areas). The job activities may require sitting, standing, walking, stooping, bending, lifting (up to 40 lbs), climbing steps, stairs and ladders, work around chemicals, reading, tasting, smelling and touching of products, wearing of PPEs (hairnet, beard net, ear protection, eye protection, steel toed shoes) as required, capable of working in freezing environments for limited time. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice An Equal Opportunity Employer EOE M/W/VET/DISABLED Job Posted by ApplicantPro

Job Description Summary The Technical Sales Specialist coordinates various departments and external contacts to provide cost-effective custom weighing solutions that meet or exceed customers' expectations. This position will help maximize the market share and profitability of the Fairbanks Scales product lines. Essential Job Duties • Estimates project costs, consults, and provides timely and effective communication during a project with multiple internal groups at all levels of the organization including sales and engineering on technical matters, ensuring the feasibility of proposed solutions., • Participates in needs analysis and information gathering meetings with Sales, Service, Distribution, and customers as required to help define the best customer solution., • Supports all industrial and other products that are designed, built, shipped, or sold out of the company's manufacturing facilities., • Provides outside vendors and contractors pricing on modifications to existing products and products not carried in our system., • Evaluates existing systems to determine effectiveness and suggests changes to meet customer requirements., • Works with engineers and other departments to resolve problems that arise during and after product implementation., • Produces reports and analyzes data to track product trends, profitability, and close rates of special products., • Participates, develops and may conduct user training., • Completes required training as assigned., • Organize travel, transportation, meals, and expenses for technician Instructor Led Training classes at the corporate office., • Follow progress of engineering teams on solution designs to maintain consistent and reasonable lead times., • Other duties as assigned. Required Qualifications - Required qualifications to effectively perform the job. An equivalent combination of education, training and experience will be considered. (Additional requirements may be designated by position.) • Associate's degree in business or a related technical field or equivalent experience is preferred., • Minimum of two (2) years' experience in scale, process control equipment or software support is preferred., • Experience in costing industrial equipment, sales or custom products is preferred., • Experience in project coordination and/or management, is preferred., • Must possess good communication skills, both verbal and written., • Self-motivated and ability to work independently, as well as part of a team., • Ability to develop effective relationships with all levels of the organization and with external customers., • Proficient in MS Office products (MS Word, MS Excel and MS Outlook). Knowledge, Skills and Abilities - May be representative, but not all-inclusive, of those knowledge, skills and abilities commonly associated with this position. • Proficient in Microsoft Office products specifically Outlook, Excel & Word., • Excellent problem-solving skills., • Excellent communication skills, both verbally and in writing., • Ability to effectively organize and prioritize work as well as concentrate on multiple tasks simultaneously., • Ability to develop and maintain business relationships. Work Environment - Environmental or atmospheric conditions commonly associated with the performance of the functions of this job. • General office conditions. Exposed to moderate noise levels. Physical Abilities - Activities that are commonly associated with the performance of the functions of this job. The physical demands described below are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. • Physical demands are medium, consisting of using various Fairbanks Scales scale products, office equipment and computers., • Required to use close vision and be able to focus., • Regularly required to talk and hear; frequently required to sit, stand, and bend at the knee and waist, and walk., • Must be able to have repetitive wrist, hand and/or finger movement to type and work on computer., • Must have finger dexterity and hand-eye coordination to work on computer, telephone, calculator and related office equipment., • Regular attendance is a necessary and essential function. Fairbanks Scales Inc. is an Equal Opportunity Employer including Disability/Vets DISCLOSURE REGARDING BACKGROUND INVESTIGATION Fairbanks Scales Inc. may obtain information about you from a third-party consumer reporting agency for employment purposes. Thus, you may be the subject of a "consumer report" and/or "investigative consumer report" which may include information about your character, general reputation, personal characteristics, and/or mode of living, and which can involve personal interviews with sources such as neighbors, friends, or associates, The reports may contain information regarding your credit history, criminal history, social security verification, motor vehicle records ("driving records"), verification of your education or employment history, or other background checks. Credit history will only be requested where such information is substantially related to the duties and responsibilities of the position for which you are applying. NOTIFICATION OF PRE-EMPLOYMENT DRUG SCREENING Fairbanks Scales Inc. performs post-offer, pre-employment drug testing for all roles prior to being hired into any role as part of our Drug Free Workplace Policy. In addition, Fairbanks Scales Inc. performs post-offer, pre-employment drug testing under the authority of the U.S. Department of Transportation prior to being hired for any role or transferred into a safety-sensitive role. Job Posted by ApplicantPro

Job Description Job Profile Job Title: Fiber Splicing Technician I, II, III Primary Location: Olathe, KS Employment Status: Full-Time, Non-Exempt Compensation: We will determine salary based on skills and experience in relation to the function of the role, as well as equity to any other employees in the same or similar role. CNS, a Congruex Company, is looking for a Fiber Splicing Technician to join our Construction team. Learn more about our operating unit at: Who Is Congruex Congruex designs and builds broadband and wireless communications infrastructure. The work we do enables everything in the modern world to operate, from healthcare and energy to transportation and social interactions. We deliver turn-key network solutions under a single platform by aligning our engineering and in-market construction operating units. Our vision is to be the best end-to-end provider of network services in the U.S. and our core values of GRIT connect everything we do. We are building tomorrow, together. Will you join us? Your New Job Job Summary: The Fiber Splicing Technician splices, tests, troubleshoots, and repairs fiber optic cables. Job Responsibilities (Including, but not limited to): • Diagnosing faulty cable plant: Identifying, detecting, and resolving issues that have known performance problems., • Provide field notes and proposals to resolve issues for client’s review and approval., • End-of-Line Network Testing: Testing light levels at the end of fiber networks for balanced signal between points is crucial to ensure proper signal transmission and network performance., • Cable Prep: Ensure that cables are properly labeled and organized to minimize errors during installation., • Build Fiber Cases and Enclosures: Constructing fiber cases and enclosures involves creating protective housings for fiber optic equipment and connections., • Splice Color for Color Fibers: When splicing fiber optic cables together, technicians match the colors of the fibers to ensure that the correct fibers are connected., • Cable Management: Organize the cables neatly within the enclosure, ensuring that they are properly routed and secured to prevent tangling or damage., • Sealing and Placement of Case: Ensuring that the enclosure is properly closed and secured to protect the equipment and cables inside from environmental elements., • Read Prints and Maps: Examine Splice Matrix and redline maps to understand fiber routes and assignments., • Splice off color and multiple cables in one enclosure., • Jumping Trays: Routing fibers from one tray to another, possibly to optimize cable management, minimize signal loss, or create efficient pathways within the enclosure., • Splice Tie Point and Jumper Cases: Splicing fibers at a tie point involves connecting fibers from different cables., • Connect Jumper cables between jumper cases., • Rehab gel-filles cases: The process of refurbishing or rehabilitating gel-filled enclosures used in fiber optic networks., • Redlining and Documentation: Marking up or annotating existing drawings or documents with changes, updates, or corrections., • Case swaps and audits: Replacing one equipment case or enclosure with another., • May pull cable through existing duct package, pull cable through conduit either manually, blowing, or mechanically, and splice and activate underground and aerial lines. General • Ability to do physical labor, climb ladders and poles, work in confined spaces, etc., • Ability to read blueprints for job specifications in placement of cables, location of utilities, etc., • Must be able to distinguish between different colors for connection of fibers., • Must be a self-starter and internally motivated to achieve corporate, department, and personal objectives., • Must have excellent interpersonal communication skills (oral and written) and be a team player., • Must possess excellent problem solving and decision-making skills., • Ability to use basic math skills to compute measurements, figure ohms, timecards, etc., • Ability to listen and to follow directions., • Must be organized, multi-tasked oriented, and maintain a neat and safe work environment., • Ability to work in high places on ladders and poles., • Ability to work in confined spaces., • Must be able and willing to work outdoors, subject to inclement weather conditions, • Must be able to maintain visual and audible contact with other crewman and all moving or stationary persons/vehicles/objects to ensure safe coordination of movement, • Must be able to work around heavy equipment and machinery, • Must be able to stand or walk for long periods of time, • Must be able to lift and carry up to 50 pounds, • Routinely requires extended periods of bending, squatting, climbing, kneeling, pushing, pulling, lifting, lifting in awkward positions, standing, and twisting, • Must be able to stand, walk, sit or be in other physically demanding positions for long periods of time No matter what role you play, you are an important part of the One Congruex Family. We offer: • Medical, Dental & Vision Benefits, • 401(k) Program with a Company Match., • Free Wellness Resources & Marketplace Discounts, • Paid Maternity & Parental Leave, • Paid Basic Life Insurance & Voluntary Options This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. This document does not create an employment contract, implied or otherwise, other than an “at-will” employment relationship.

Job Description JOB SUMMARY The MRI TECHNOLOGIST/TECHNICIAN, under the direct supervision of a radiologist, performs quality magnetic resonance imaging scans on patients of all ages. ABOUT US For more than 40 years, ATC Healthcare has provided leading nurses and healthcare professionals to hospitals and facilities nationwide. Healthcare systems around the U.S., including municipal health systems, multi-unit senior care companies, governments, school systems, VMS and MSP vendors trust us to deliver more than 100,000 nurses and other healthcare professionals on-demand. If you have a track record of success in healthcare, we want you to join us! We offer the following benefits: • Medical insurance, • Dental insurance, • Vision insurance, • Referral program, • Tuition reimbursement, • 401k Plan, • Flexible Schedules, • Life insurance, • Disability insurance, • Identity theft insurance Technician: Graduate of an MRI program of study at the associate’s degree level. Technologist: Graduate of an MRI program of study at the bachelor’s degree level. LICENSURE State specific; current and unrestricted license or registration to practice as an MRI technologist/technician in the state of practice, as applicable. ARRT registration. EXPERIENCE One year of current MRI technologist/technician experience in the clinical setting. CREDENTIALS Current CPR at least; and other health and screening tests as required by specific facilities and/or regulatory agencies. ENVIRONMENTAL WORKING CONDITIONS Various client facility settings; possible exposure to blood, bodily fluids, and other potentially infectious materials. REPRESENTATIVE DUTIES AND RESPONSIBILITIES • Complies with ATC policies/procedures., • Complies with client facility policies/procedures., • Documents accurately and completely services provided., • Maintains confidentiality relative to patient care and facility practices in accordance with the Health Insurance Portability and Accountability Act (HIPAA)., • Provides patient care in a non-judgmental, non-discriminatory manner that considers cultural diversity and age appropriateness so that autonomy, rights, and dignity are preserved., • Communicates information effectively to appropriate personnel., • Maintains competency by participating in continuing education programs and meets state specific requirements., • Interviews patient and explains magnetic resonance imaging procedures., • Positions patient on examining table following protocols requested by radiologist., • Enters data such as patient history, anatomical area to be scanned, orientation specified, and position of entry into the computer., • Demonstrates knowledge of cross-sectional anatomy., • Monitors patient safety and comfort and views images of area being scanned on video display screen to ensure quality of pictures. Other Duties: Please note this job summary is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may vary by assignment and may change at any time with or without notice. Equal Opportunity Employer: ATC Healthcare Services is an Equal Opportunity Employer. All applicants will be considered for employment without regards to race, color, religion, age, sex, sexual orientation, gender identity, national origin, veteran or disability status or any other category protected by Federal, State or local law. M/F/D/V EOE ADD TAG

Job Description PURPOSE Automation Technicians will be responsible for supporting Project Managers and System Engineers with creating, installing, and commissioning of PLC/HMI/SCADA based systems as well as network and device integration work. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be constructed as exclusive or all inclusive. Other duties may be required and assigned. • Assist with project programming, start up, and commissioning of new PLC/HMI/SCADA control systems, service and maintenance of existing installations, fault diagnoses, hardware repairs, and programming bug fixes and alterations on customer sites, • Assist with diagnosing and resolving technical problems on jobs and provide appropriate reports to Project Management or Operations Leaders via email, SharePoint, OneDrive, or other repository applications, • Attend project kickoff and turnover meetings with Project Managers to gain knowledge of project estimate and scope and final project completion documentation, • Organize and maintain control submittal project redlines and submit to design engineer at project end for as built drawing package creation after review from Team Lead or Senior Engineer, • Work with other technicians to develop and share technical solutions, • Actively participate in technician training to maintain technical expertise on new products, tools, and integration through continuing education initiatives MINIMUM EDUCATION & EXPERIENCE REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Minimum of three years of experience with PLC/HMI control system preferred, • Or A.A.S degree specialized in Robotics, Automation, Technology or in process of completion MENTAL AND PHYSICAL COMPETENCIES REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Working knowledge of at least one PLC software (i.e. Rockwell RSLogix, Studio 5000, CCW, Modicon Unity Pro, Mitsubishi, or many others), • Working knowledge of at least one HMI software (i.e. Rockwell FactoryTalk View or Wonderware InTouch, or many others), • Working SCADA knowledge preferred but not required (i.e. Ignition, Factory Talk View SE, Optix, GE iFix, Ecostruxure Power Operations or SCADA, or many others), • Knowledge of common Windows Office applications and Repositories (i.e. OneDrive, SharePoint, GIT), • Knowledge of Microsoft SQL or other database applications preferred but not required, • Knowledge of Ethernet and serial network communication formats and hardware configurations, • Understanding of basic process controls (i.e. PID control loops, motor control, commissioning of digital and analog measurement devices), • Excellent interpersonal skills with ability to communicate effectively, both verbal and written, • Ability to travel to customer locations for overnight work approximately 25% ENVIRONMENTAL ADAPTABILITY • Prolonged periods of sitting at a desk working on a computer, • Must be able to lift 20 pounds occasionally, • Significant field and client interactions on construction job sites, which may require prolonged periods of standing, walking and/or climbing stairs, • Occasional exposure to variety of temperature and weather conditions EQUIPMENT/TOOLS • Laptop computer Baker Group is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, Baker Group will consider reasonable accommodations for qualified individuals with disabilities and encourage prospective employees and incumbents to discuss potential accommodations with the Employer.

Environmental Services Technician (EVS Tech) - UH Truman Medical Center - PRN. Help Keep Our Hospital Clean & Safe: Join Our Team as an Environmental Services Worker!. Experience in Environmental Services:.

These positions are located within the Environmental Management Services Division of a VA Medical Center.These positions are under the direct supervision of the Housekeeping Supervisor or designee.These positions perform both janitorial and custodial services at the Kansas City VA Medical Center in

Job Description PURPOSE Provide technical start-up, checkout and programming for Building Automation and Control Systems. Maintain and grow the “Client for Life” concept for existing and new customers. Performs related work as required. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be constructed as exclusive or all inclusive. Other duties may be required and assigned. • Work collaboratively with design engineers, operation engineers, and purchasers and other internal staff, • Start-up of Microprocessor based control components including PLC and DDC controllers, sensors, actuators, transducers, and associated components, • Understand construction schedules and manage QA/QC checklists and commissioning logs, • Ability to interpret Sequence of Operations (SOO) and apply to program logic, • Ability to read and write code ladder logic, structured text, and function block programming, • Mentor, training, and oversee Automation Technician I and IIs, • Ability to lead medium to large size projects, • Point-to-point checkout of wiring and components for proper grounding, polarity, communication and power, • Set up and calibration of input and output devices such as temperature sensors, pressure transducers, etc., • Uploading, downloading, and modification of control software and programs, • Perform networking functions such as setting up IP addresses, subnet masks, MAC addresses and instance numbers, • Create and troubleshoot automation networks and communication protocols., • Identify and troubleshoot complex Automation HVAC and Electrical systems including but not limited to psychometrics, refrigeration, building pressure controls, life safety systems, EPMS, process controls, steam heating, humidification and de-humidification, and central heating and cooling systems., • Map control points into supervisory controller and add alarms and history extensions to supervisory controller points, • Map control points into graphical front end and link points to graphics, • Create Automation System graphics and dashboards MINIMUM EDUCATION & EXPERIENCE REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Four (4) to Seven (7) years of Automation related field experience, • Associate degree in Electronic, Technology, or Automation related field or equivalent on the job experience CERTIFICATES, LICENSES, REGISTRATIONS • Valid driver’s license MENTAL AND PHYSICAL COMPETENCIES REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Ability to perform all necessary duties unsupervised, • Knowledge of common Windows Office applications, • Knowledge of Microsoft SQL or other database applications preferred but not required, • Knowledge of Ethernet and serial network communication protocols and hardware configurations, • Understanding of basic process controls (i.e. PID control loops, motor control, commissioning of digital and analog measurement devices), • Excellent interpersonal skills with ability to communicate effectively, both orally and written, • Ability to take direction and full fill commitments, • Value and support company mission and culture, • Display honesty, integrity, sound reasoning, good judgment/values, and lead by example, all while maintaining strong internal and external relationships at all levels, • Understanding of construction site safety and display a high awareness of your surroundings, • Effectively prioritize and balance the “big picture” and immediate responsibilities, • Ability to listen effectively, value the opinions of others and acknowledge contributions of others, • Ability to communicate and work well with others specifically but not limited to our electrical team members and project management staff at all levels, • Effectively train, mentor, and delegate work tasks to lower-level Automation Technicians, • Ability to effectively work with your project team members to resolve issues promptly ENVIRONMENTAL ADAPTABILITY At any given time, may be exposed to: • Typical construction site and/or industrial site risks and environment EQUIPMENT/TOOLS • Laptop PC, • Electronic Multimeter, • Magnehelic, • RS-485 and RS-232 Serial Adapters, • Hand tools/Light power tools, • Product Manufacturer Software, • AutoCAD Electric, • PLC Software (Allen-Bradley RSLogix 500, StudioLogix5000, or Modicon), • HMI Software (Wonderware or FactoryTalk View), • DDC Software (Schneider Electric Eco Struxure, Alerton Compass, or Tridium Niagara), • Ladders and Lifts, • Oscilloscope, • Wireshark, • Computer systems: Windows, Linux, Command Line Baker Group is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, Baker Group will consider reasonable accommodations for qualified individuals with disabilities and encourage prospective employees and incumbents to discuss potential accommodations with the Employer.

Job DescriptionPURPOSE Provide technical start-up, checkout and programming for Building Automation and Control Systems. Maintain and grow the “Client for Life” concept for existing and new customers. Performs related work as required. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be constructed as exclusive or all inclusive. Other duties may be required and assigned. • Work collaboratively with design engineers, operation engineers, and purchasers and other internal staff, • Start-up of Microprocessor based control components including PLC and DDC controllers, sensors, actuators, transducers, and associated components, • Understand construction schedules and manage QA/QC checklists and commissioning logs, • Ability to interpret Sequence of Operations (SOO) and apply to program logic, • Ability to read and write code ladder logic, structured text, and function block programming, • Mentor, training, and oversee Automation Technician I and IIs, • Ability to lead medium to large size projects, • Point-to-point checkout of wiring and components for proper grounding, polarity, communication and power, • Set up and calibration of input and output devices such as temperature sensors, pressure transducers, etc., • Uploading, downloading, and modification of control software and programs, • Perform networking functions such as setting up IP addresses, subnet masks, MAC addresses and instance numbers, • Create and troubleshoot automation networks and communication protocols., • Identify and troubleshoot complex Automation HVAC and Electrical systems including but not limited to psychometrics, refrigeration, building pressure controls, life safety systems, EPMS, process controls, steam heating, humidification and de-humidification, and central heating and cooling systems., • Map control points into supervisory controller and add alarms and history extensions to supervisory controller points, • Map control points into graphical front end and link points to graphics, • Create Automation System graphics and dashboards MINIMUM EDUCATION & EXPERIENCE REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Four (4) to Seven (7) years of Automation related field experience, • Associate degree in Electronic, Technology, or Automation related field or equivalent on the job experience CERTIFICATES, LICENSES, REGISTRATIONS • Valid driver’s license MENTAL AND PHYSICAL COMPETENCIES REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Ability to perform all necessary duties unsupervised, • Knowledge of common Windows Office applications, • Knowledge of Microsoft SQL or other database applications preferred but not required, • Knowledge of Ethernet and serial network communication protocols and hardware configurations, • Understanding of basic process controls (i.e. PID control loops, motor control, commissioning of digital and analog measurement devices), • Excellent interpersonal skills with ability to communicate effectively, both orally and written, • Ability to take direction and full fill commitments, • Value and support company mission and culture, • Display honesty, integrity, sound reasoning, good judgment/values, and lead by example, all while maintaining strong internal and external relationships at all levels, • Understanding of construction site safety and display a high awareness of your surroundings, • Effectively prioritize and balance the “big picture” and immediate responsibilities, • Ability to listen effectively, value the opinions of others and acknowledge contributions of others, • Ability to communicate and work well with others specifically but not limited to our electrical team members and project management staff at all levels, • Effectively train, mentor, and delegate work tasks to lower-level Automation Technicians, • Ability to effectively work with your project team members to resolve issues promptly ENVIRONMENTAL ADAPTABILITY At any given time, may be exposed to: • Typical construction site and/or industrial site risks and environment EQUIPMENT/TOOLS • Laptop PC, • Electronic Multimeter, • Magnehelic, • RS-485 and RS-232 Serial Adapters, • Hand tools/Light power tools, • Product Manufacturer Software, • AutoCAD Electric, • PLC Software (Allen-Bradley RSLogix 500, StudioLogix5000, or Modicon), • HMI Software (Wonderware or FactoryTalk View), • DDC Software (Schneider Electric Eco Struxure, Alerton Compass, or Tridium Niagara), • Ladders and Lifts, • Oscilloscope, • Wireshark

Job Description Reports to: Recovery Manager or Director of Recovery Services FLSA Status: Exempt Job Status: Full time Location: Various POSITION PURPOSE: This mission centered position is responsible for coordinating the day-to-day operations of a Saving Sight recovery facility. This includes training and people management duties. ESSENTIAL DUTIES AND RESPONSIBILITIES: This position's duties may include any or all the following: · Supports the Hospital Development Recovery Manager with the coordination of eye tissue procured within the assigned territory. · Maintain complete and accurate records for all facility functions. · Maintain all necessary supplies for the facility using the iTransplant electronic supply management system. · Supervise recovery and transportation of ocular tissue procured within the assigned territory · Provide timely and effective verbal and written communication regarding facility issues. · Ensure facility equipment is in good working condition. · Oversee Recovery Technician training in the absence of a Lead Recovery Technician. · Ensures compliance with Saving Sight Operating Procedures, EBAA medical standards, and other state and federal guidelines. · Will be required to cover 2 on-call shifts per week. This may include day, night, weekend, and/or holiday hours in an on-call status occasionally going beyond shift times in order to complete tasks. · Work with Manager/Director to fill open positions at your assigned location. · Manage onboarding activities for new employees. · Collaborates with the Recovery Department Director/Manager in developing training materials and updates when necessary. · Maintain staffing levels at assigned location working with leadership to fill open positions. · Manage staff performance and quality recovery functions to include re-training when quality standards have not been met. · Manage employee growth using O3's and PIP's. EDUCATION: · High school diploma and an equivalent combination of education and experience from which comparable knowledge, skills, and abilities can be acquired · Continual training and certification necessary for maintaining skills of this position QUALIFICATIONS and EXPERIENCE: · A minimum of one (1) year of experience in medical, surgical, or funeral home background required. · Strong interpersonal, written, verbal, and phone communication skills required. · Strong organizational skills, problem-solving abilities and attention to detail. · Ability to work independently, with limited direction, and in a team environment. · Ability to work with distraction and to multi-task with frequent interruptions. · Working knowledge of Microsoft operating systems, Microsoft Office, general database, and web-based applications. · Must maintain a valid driver's license and acceptable driving record as determined by the organization. · Must have reliable transportation. PHYSICAL REQUIREMENTS: · Ability to travel throughout service region as required. · Requires occasional out of town stays. · Driving for extended periods or long distances may be required. · Ability to cover shifts with short notice to ensure adequate staffing. · Frequent periods of intense concentration, attention to detail and accuracy. · Ability to handle mental and physical strain involved in use of printed materials and prolonged use of computer screens. · Ability to perform delicate manual procedures requiring high amounts of dexterity. · Long periods of sitting and/or standing may be required. · Ability to climb stairs. · Required to have a yearly flu vaccine · Ability to lift and move more than 50 pounds. ENVIRONMENTAL DEMANDS Ability and knowledge to work in various work environments, for example; normal office environment, normal outdoor exposures, hospital settings (floor, operating room, morgue), funeral home, and medical examiner settings NOTE: The preceding statements describe the nature and level of assignments normally given job incumbents. They are not an exhaustive list of duties. Additional duties may be assigned. Saving Sight is an Equal Opportunity Employer. We take pride in the diversity of our staff, and seek diversity in our applicants. Saving Sight does not unlawfully discriminate on the basis of any status or condition protected by applicable federal or state law. Saving Sight reserves the right to seek, hire and promote persons who support the goals and mission of the institution. Job Posted by ApplicantPro

Environmental Services Technician (EVS)/Housekeeping.

Environmental Services Technician (EVS Tech) - UH Lakewood (7a - 3:30p). Help Keep Our Hospital Clean & Safe: Join Our Team as an Environmental Services Worker!. Experience in Environmental Services:.

Environmental Services Floor Technician - UH Lakewood (5p - 1:30a). Floor Technician – Environmental Services Team. And when needed, you’ll jump in to support our Environmental Services team to keep the whole place running smoothly.

The Environmental Service Technician is responsible for maintaining a high level of cleanliness within the hospital and adjacent buildings, which may require traveling from one facility to another without assistance. One (1) year of knowledge within acute care hospital environmental service techniqu

EVS Technician - Environmental Services - Lakewood (FT 3:00pm - 11:30pm). Moves furniture, equipment, and supplies, in and around hospital departments; and performs a variety of environmental services duties to maintain the hospital in a neat, orderly, and sanitary condition in accordance with safet

EVS Technician - Environmental Services - Lakewood (FT 3:00pm - 11:30pm). Moves furniture, equipment, and supplies, in and around hospital departments; and performs a variety of environmental services duties to maintain the hospital in a neat, orderly, and sanitary condition in accordance with safet

Environmental Services Technician (EVS)/Housekeeping. Building Maintenance/Safety - Environmental Services / Housekeeping.

Environmental Services Technician (EVS Tech) - UH Lakewood (7a - 3:30p). Help Keep Our Hospital Clean & Safe: Join Our Team as an Environmental Services Worker!. Experience in Environmental Services:.

Floor Technician - Environmental Services Team. Environmental Services Floor Technician - UH Lakewood (5p - 1:30a). Are you someone who takes pride in clean, polished, and well-cared-for spaces? Do you love seeing floors go from "meh" to "WOW"? We're looking for a Floor Care Technician who's ready t

Full time, Days, Tuesday - Saturday / 8:00am - 4:30pm.If you're looking for a schedule that fits your lifestyle, check out PAM Health - and.Some things that our hospital can offer YOU as a full-time employee:.Medical Benefits: EPO/HDHP/HSA options, including prescription coverage, Rx 'n Go, and Tela

Hazardous Waste Transport Driver.This driver will transport, remove, deliver, and collect various liquid and solid hazardous wastes from various customer sites.Will be required to load and unload trucks.They will also have the ability to operate a variety of truck and equipment including vacuum truc

Full time, Days, Tuesday - Saturday / 8:00am - 4:30pm.If you're looking for a schedule that fits your lifestyle, check out PAM Health and ask us about our comprehensive benefits package!.Some things that our hospital can offer you as a full-time employee:.Medical Benefits: EPO/HDHP/HSA options, incl

Environmental Services Technician (EVS)/Housekeeping.