Health science degree jobs in Buffalo, New YorkCreate job alerts

Grossing technician: Histotechnicians/Grossing technicians are an essential part of the team of laboratory health care professionals. They perform testing and prepare body fluids and tissues that are critical to the diagnostic process in determining health and disease. Shift: 9:00 AM - 5:30 PM Responsibilities Include: • Receives specimens in the grossing laboratory, • Enters patient information into the laboratory information system, verifying identification, • Labels cassettes with accession/laboratory numbers, • Performs quality control and quality assurance procedures, such as preventive maintenance and temperature checks, • Maintains a clean and well-organized work area, • Performs various clerical duties, • Always maintains strict confidentiality and protects patient information, • Ensures specimen integrity upon receipt and throughout the entire macroscopic examination process, • Performs routine activities involved in the preparation of surgical specimens for histologic processing, according to delineation of privileges, policies, and procedures, • Sets up necessary equipment, supplies, and specimens for macroscopic examination, • Describes gross anatomic features of biopsies or routine, uncomplicated surgical specimens without selective sampling, • Loads prepared cassettes into a tissue processor and starts the processor, • Maintains cleanliness of the anatomic pathology suite, • Operates and cleans laboratory equipment, instruments, and workstations, • Maintains wet tissue storage, • Stores, rotates, and disposes of all wet tissues in accordance with departmental procedures, • Disinfects and maintains specimen storage cabinets, • Properly label, store, handle, and dispose of reagents and hazardous waste according to local, state, and federal regulations; this may include recycling or reprocessing of reagents used in the department including neutralizing formalin before disposal, • Maintains laboratory equipment and tracks all routine maintenance and quality controls performed, • Adhere to CAP, CLIA, state regulations, HIPAA, safety, and OSHA regulations Qualifications Bachelor’s Degree in Clinical Laboratory Science or Medical Technology from an accredited institution or equivalent required. Licensed by New York State Education Department (NYSED) as a Clinical Laboratory Technologist, Technician, Histotechnician, Pathologists Assistant or equivalent required. Minimum of 2 - 5 years’ work experience preferred. Microtomy experience a plus. ASCP certification preferred. About Us: Acupath Laboratories is a nationwide provider of specialized anatomic pathology services, focusing on areas like urology, gastroenterology, and hematology/oncology. We are based in Plainview, NY, and were founded in 1998. Acupath offers a wide range of tests, including FISH testing for various cancers and COVID-19 PCR testing. Acupath Laboratories is a well-established and respected provider of specialized pathology services, with a strong focus on client needs and a commitment to innovation and quality.

Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Title: CNC Machinist Location: Mocksville, NC (Onsite) (338 Valley Rd. Mocksville, NC 27028) Shift: 3rd Shift (3rd shift - Sunday - Friday 11pm - 7am) Pay:$24 - $28 per hour Based on Experience About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: We are looking for a skilled CNC Machinist to perform a variety of tasks as assigned in conjunction with the assembly of our product. You will ensure all parts fit correctly and are suitable for the final product. This position is responsible for safely performing high-level continuous work to quality standards. Assignments may change based on business demands. You must have desired technical knowledge and possess great manual dexterity. Ability to interpret instructions represented in manuals, drawings, schematics etc. and follow them with precision. Responsibilities: • Uses blueprints, sketches, drawings, and/or job instruction sheets to produce dimensions and tolerances of finished work-piece and setup requirements., • Cutting tools, attachments, accessories, and materials on machines such as mills, lathes, grinders, machining centers, drill presses, and drill machines., • Enters commands to retrieve, input, or edit control information for CNC machines., • Sets up, operates, and monitors machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required., • Utilizes a variety of measurement tools and methods to evaluate finished parts against specifications., • Reworks parts that don't meet specifications., • Confers with supervisor, engineers, and production personnel to resolve machining problems., • Follows all ISO procedures and safety rules, including wearing personal safety equipment and performing hoist inspections., • Routes completed parts to next machine according to the routing sequence., • Performs data entry on the computer to update part locations., • Updates work order cover sheets, daily production sheets, status sheets, and quality records., • Participates in regular communication among peers and Team Leads to maintain productivity and solve problems as they arise., • Operates with the close attention to detail required to meet print specifications, down to 0.0002in tolerances., • Maintains 5S standards of organization and housekeeping of work area., • Participates in improvement efforts for cell layout, process efficiencies, etc., • High school diploma or GED, • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, blueprints, memos, and procedure manuals., • Ability to effectively share information about job duties in one-on-one and small group situations to supervisor, customers, clients, and other employees of the organization., • Ability to perform basic calculations with numbers between 0.0001 and 0.1, • Ability to convert between metric and US standard units of measure., • Ability to understand and carry out detailed written or oral instructions., • Ability to deal with problems involving several variables, • Ability to use standard problem-solving methods (ie. 5 Whys) as trained, • Ability to stand and walk up to 8 hours continuously during a shift., • Ability to lift up to 35 lbs alone, or 70 lbs with assistance, repeatedly over an 8 hour shift, • Ability to push or pull up to 35 lbs., • Associates degree, or training certification Pay Range: Starting Pay will range between $24.00 - $28.00 per hour depending on qualifications and experience. This is a full-time, hourly position. What we Offer: At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit . What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. APPLY NOW

Abbott is a global healthcare leader that helps people live more fully at all stages of life. Our portfolio of life-changing technologies spans the spectrum of healthcare, with leading businesses and products in diagnostics, medical devices, nutritionals and branded generic medicines. Our 115,000 colleagues serve people in more than 160 countries. Working at Abbott At Abbott, you can do work that matters, grow, and learn, care for yourself and your family, be your true self, and live a full life. You’ll also have access to: • Career development with an international company where you can grow the career you dream of., • Employees can qualify for free medical coverage in our Health Investment Plan (HIP) PPO medical plan in the next calendar year., • An excellent retirement savings plan with a high employer contribution, • Tuition reimbursement, the ___ student debt program, and ___ education benefit - an affordable and convenient path to getting a bachelor’s degree., • A company recognized as a great place to work in dozens of countries worldwide and named one of the most admired companies in the world by Fortune., • A company that is recognized as one of the best big companies to work for as well as the best place to work for diversity, working mothers, female executives, and scientists. The Opportunity Our business purpose is to restore health and improve quality of life through the design and provision of device and management solutions for the treatment of STRUCTURAL HEART disease. We aim to lead the markets we serve by requiring the solutions we offer customers to enable outcomes that advance the standard of care. The job purpose and scope of the Clinical Sales Specialist (CSS) role is to provide TAVI clinical trial and commercial case support, trial enrollment & education initiatives for accounts within a defined region. In this role, the Clinical Sales Specialist will be an integrated part of the trial and commercial sales process in collaboration with the Territory Manager (TM) to educate interventional cardiologists, cardiac surgeons, and hybrid OR/cath lab personnel on the safe and effective use of Abbott TAVI products. The role is responsible for customer interface while demonstrating expertise with our TAVI clinical and commercial product portfolio, procedure & therapy to achieve best in class patient outcomes to advance clinical evidence and commercial market share. This position may be hired at different level, depending on the experience of the candidate. This position may travel more than 50% depending on staffing and regional demands. The CSS will report to the Regional Sales Director with guidance from the Territory Manager on daily activities. What You’ll Work On This position is responsible for the following TAVI clinical trial & commercial activities with key elements of technical & clinical expertise, training & education, customer service & communication skills. This position collaborates with the Territory Manager, Regional Sales Director, Clinical Lead Specialist to advance market share and optimize the customer clinical experience. • Successfully complete our internal training plan to include hemodynamics, ECG, angiography, echo & CT imaging modalities and complete the case support and proctor delegate authorizations., • Provide active clinical trial & commercial case support, demonstrating excellence in procedural success rates & patient outcomes., • Scrub in sterile and provide TAVI valve loading in procedures & training instruction to trial and commercial customers, • Provide our customers CT valve sizing analysis utilizing the Pie Medical 3Mensio CT program, • Provide trial site engagement & participation in subject selection committee calls, • Lead customer didactic education sessions for account activation before first implants, • Lead pre case planning & debriefing of heart team pre & post procedure and provide ongoing education as requested for proper in - service levels, • Properly manage trial and commercial inventory & acquisition and field trunk stock, • Provide documentation as required for quality assurance initiatives, • Co-develop commercial business plan for assigned region with Territory Manager (TM), • Co-support internal/external quarterly business reviews with Territory Manager (TM), • Data entry into Salesforce, Mentor software for customer case support management, • Learn commercial data analytics, resources & tools for effective customer experience, • Support customer engagement strategy with Territory Manager (TM)), • Demonstrate competency with marketing messaging, clinical evidence and medical education portfolio offering, • Complete sales enablement training of professional selling skills and challenger methodology, • Demonstrate knowledge in the TAVI market, industry & competitive insights, • Participate in team meetings, conventions, and national sales meetings as requested, • Complete vendor credentialing process for hospital access as required Required Qualifications • Bachelor of Science (BS) or Arts (BA) college degree or equivalent clinical degree i.e., Registered Cardiovascular Invasive Specialist (RCIS), Certified Cardiology Technician, Registered nurse (RN) or Nurse Practitioner (NP), Transcatheter Cardiovascular Surgical/Scrub technician, Physician Assistant (PA)., • 6+ years clinical work experience required in hospital or medical device industry with strong clinical background with products for use in interventional cardiology, cardiac surgery, endovascular/TEVAR/EVAR/TCAR or has supported 100 + TAVI cases., • Verification that you will satisfy all vendor credentialing requirements, which may include vaccination for COVID-19. If you require a medical or religious accommodation from these requirements or if you would like to understand more about these requirements, please advise HR so that we can provide additional information and if needed, we can explore any needed accommodation(s). Preferred Qualifications • Degree in life sciences, • Strong consideration will be given to candidates with TAVI or transcatheter Structural Heart experience. Learn more about our health and wellness benefits, which provide the security to help you and your family live full lives: ___ Follow your career aspirations to Abbott for diverse opportunities with a company that can help you build your future and live your best life. Abbott is an Equal Opportunity Employer, committed to employee diversity. Connect with us at ___, on Facebook at ___, and on Twitter @AbbottNews. The base pay for this position is $68,000.00 – $136,000.00. In specific locations, the pay range may vary from the range posted.

Project Manager - Metals - Position and Responsibilities As a Project Manager (PM) with Middough, you will serve as a client account manager and will be the primary point of contact for the client and other outside consultants concerning the project(s). The PM is also responsible for the overall development and execution of a portfolio of metals industry projects (typically $1MM+ project fee) including project profitability, quality, safety, client satisfaction, controlling available resources, project scope, schedule, budget and contractual requirements. Additionally, the PM will provide leadership and organization to the project and instill confidence in the client regarding the project team's abilities. Responsibilities include, but are not limited to, the following: • Support business and relationship developments activities of the division., • Coordinate completion of defined work scope for a project between disciplines/locations involved., • Assist in preparation of project execution strategy and reviews progress as drawings and specifications are developed and prior to issue for permit and construction., • Monitor changes in scope/schedule and secures change authorizations, as required., • Manage project financials, pricing, invoicing, and cash flow., • Develop, review, and approve all project management documents including scope development, project costs and schedules, and internal/external communications., • Develop proposals, project specification/scopes and negotiate final contracts., • Monitor project costs and quality to ensure the profitability and technical performance of the project and develop innovative actions to correct variances to scope, budget and/or schedule., • Exercise cost efficient and innovative approaches in the design to save construction costs and improve productivity., • Anticipate, recognize and identify key project issues/problems and establishes objectives and priorities in solving them and determines solutions and directs their implementation., • Prepare periodic reports for the client to track cost, schedule, and quality performance., • Accredited Bachelor of Science degree in Engineering discipline., • 10+ years of project management experience in consulting organizations and within the Metals industry., • Professional Engineering License and/or PMP Certification preferred., • Broad knowledge, understanding and experience with the basic engineering and construction models including A/E, AEPCM, Design Build and/or CM., • Thorough understanding of contract administration, liability, and safety issues., • Working knowledge of Microsoft Office products and Navisworks., • Strong analytical, problem-solving, and attention to detail abilities., • Ability to multitask and organize for project efficiency., • Remain in a stationary position, often standing or sitting for prolonged periods., • Frequently walk, reach with hands and arms, climb stairs, balance, stoop or kneel, twist/bend, use repeating motions that may include the wrists/hands/fingers and talk and hear., • Frequently use up-close vision, distance vision, depth perceptions, and the ability to adjust focus., • Should not expect adverse environmental conditions within company offices., • May be exposed to adverse environmental conditions (such as climbing ladders and/or stairs, extreme heat and/or cold, and/or poor air quality) if or when on-site at a client facility. Safety protections to be provided by the client and/or company and are required to be used and followed., • May require occasional car or air travel to other company locations or client sites. What Middough Offers We offer a growth and learning culture which encourages and supports employee development through a wide variety of tools and resources such as the company Learning Management System, Middough Learning Center. Middough provides an opportunity to bring your talents and expertise to a successful and growing organization for your career advancement goals. Additionally, we offer a highly competitive compensation and the following comprehensive benefits package, based on eligibility and plan terms/changes: • A hybrid work model for work-life flexibility (based on business and client needs), • Medical, Dental, and Vision coverage, • Company paid Short/Long Term Disability, Life, AD&D, and Travel Insurance, • Health Saving and Flexible Spending Accounts, • 401(k) Plan, • Paid Time Off, Company Paid Holidays, • Flexible Start Times, • Tuition Assistance, • Paid Certifications and Registrations (as applicable) Equal Opportunity Employment We are an equal opportunity employer and value diversity at our company. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, sex, gender identity, sexual orientation, pregnancy, status as a parent, national origin, age, disability (physical or mental), family medical history or genetic information, political affiliation, military service, or other non-merit based factors or any other protected characteristic under protected by federal, state, or local laws. Middough does not support sponsorship for any applicant that requires an employment visa (i.e., H-1B) to work lawfully in the US.

Electrical Engineering Manager - Position and Responsibilities As an Electrical Engineering Manager with Middough, you will direct and manage the work of a team to complete work on time, within budget, in accordance with applicable codes/standards, and per Middough work processes and guidelines. The Electrical Engineering Manager will also administer corporate policy as required, develop, and implement long term employee development plans and objectives, provide technical and management leadership, assists staff in solving complex problems through technology, lessons learned, development of best practices, and drives all related efforts in the advancement toward technical and project execution excellence. Responsibilities include, but are not limited to, the following: • Plan, develop, coordinate, and direct team members to the successful completion of projects., • Collaborate with senior management in coordinating work for projects., • Determine department technical staffing needs and collaborate with HR to recruit and interview candidates., • Coach and develop team members using best practices, performance management, supportive behavior, and training tools., • Participate in planning, cost-development, project management and scheduling for assigned projects, • Use company work processes to provide quality checks and reviews of all assigned projects., • Manage quality and accuracy standards for the electrical department and review and approve completed technical deliverables., • Perform technical analysis and solutions for complex or unique projects., • Secure peer review to help guarantee quality products are produced per client, industry, and company expectations., • Use scheduling and earned value tool(s) to help ensure forecasting is predictable and projects are completed on time and per budget., • Develop client rapport by providing valued technical and managerial solutions., • Take an active role as needed in support of business development activities to keep team productive., • Accredited Bachelor of Science degree in Electrical Engineering., • Professional Engineer license preferred., • 15+ years of experience in electrical engineering. Preferred areas of knowledge to include Power distribution, system modeling & analysis, protective relay coordination, energy audits, substation design, facility design, Class I, Division I & Division II design, equipment specification, equipment layout, lighting, lightning protection, energy management systems, start-up, and the application of NEC., • 5+ years of people management experience and project team management experience., • Experience with Front End Engineering and Design or Front-End Loading studies., • Working knowledge of Microsoft Office., • Excellent analytical, problem-solving, and attention to detail abilities., • Excellent multitasking and organizational abilities for project efficiency., • Remain in a stationary position, often standing or sitting for prolonged periods., • Frequently walk, reach with hands and arms, climb stairs, balance, stoop or kneel, bend or twist, use repeating motions that may include the wrists/hands/fingers and talk and hear., • Frequently use up-close vision, distance vision, depth perceptions, and the ability to adjust focus., • Should not expect adverse environmental conditions within company offices., • May be exposed to adverse environmental conditions (such as climbing ladders and/or stairs, extreme heat and/or cold, and/or poor air quality) if or when on-site at a client facility. Noise levels may be moderate to high at various client sites, hearing protection may be required and/or provided. Safety protections provided by the client and/or company are required to be used and followed., • May require occasional car or air travel to other company locations or client sites. What Middough Offers We offer a growth and learning culture which encourages and supports employee development through a wide variety of tools and resources such as the company Learning Management System, Middough Learning Center. Middough provides an opportunity to bring your talents and expertise to a successful and growing organization for your career advancement goals. Additionally, we offer a highly competitive compensation and the following comprehensive benefits package, based on eligibility and plan terms/changes: • A hybrid work model for work-life flexibility (based on business and client needs), • Medical, Dental, and Vision coverage, • Company paid Short/Long Term Disability, Life, AD&D, and Travel insurance, • Health Saving and Flexible Spending Accounts, • 401(k) Plan, • Paid Time Off, Company Paid Holidays, • Tuition Assistance, • Paid Certifications and Registrations (as applicable) Equal Opportunity Employment We are an equal opportunity employer and value diversity at our company. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, sex, gender identity, sexual orientation, pregnancy, status as a parent, national origin, age, disability (physical or mental), family medical history or genetic information, political affiliation, military service, or other non-merit based factors or any other protected characteristic under protected by federal, state, or local laws. Middough does not support sponsorship for any applicant that requires an employment visa (i.e., H-1B) to work lawfully in the US.

If you are a current Jazz employee please apply via the Internal Career site. Jazz Pharmaceuticals is a global biopharma company whose purpose is to innovate to transform the lives of patients and their families. We are dedicated to developing life-changing medicines for people with serious diseases - often with limited or no therapeutic options. We have a diverse portfolio of marketed medicines, including leading therapies for sleep disorders and epilepsy, and a growing portfolio of cancer treatments. Our patient-focused and science-driven approach powers pioneering research and development advancements across our robust pipeline of innovative therapeutics in oncology and neuroscience. Jazz is headquartered in Dublin, Ireland with research and development laboratories, manufacturing facilities and employees in multiple countries committed to serving patients worldwide. Please visit ___ for more information. The Senior Oncology Account Manager is responsible for direct promotion of Jazz Pharmaceuticals' products, and the development and management of business relationships with therapeutic specialists within an assigned geographical territory. The Senior Oncology Account Manager (OAM) is an integral part of the commercial team that includes all personnel dedicated to the sales and marketing functions. The Senior Oncology Account Manager will implement Jazz Pharmaceuticals' marketing strategies and marketing tactics to achieve sales goals through short-term and long-term objectives. This position reports directly to the Regional Sales Manager. Key Skills: Strategic Account Management: Customer Understanding * Possess strong sales analytics capabilities with demonstrated understanding of prescribing and purchasing decision processes and any marked differences from national trends * Demonstrate a thorough understanding of: * Internal customer business models - how profit is generated, business and financial risks, cost impacts of managing patient care * External customers - current reimbursement landscape/ managed care, payer issues and trends, and other factors which inform the development of one's annual territory business plan * Gain understanding of customer needs through thorough research and analysis to understand the specific needs and requirement of each customer/and or account * Identify key stakeholders within the account and understand their roles, priorities, motivations and patient needs * Proven excellence to leverage all available resources - dashboards, alerts, omnichannel reports, speaker programs, conference attendance * Actively gain customer insights and provide timely feedback to cross-functional partners and regional sales manager regarding account business trends, changes in the therapeutic landscape, performance, industry issues and business opportunities and obstacles Strategic Planning: Keep the needs and expectations of the customer/patients at the forefront of all that we do * Define clear, measurable objectives that align both with the company goals and the goals and needs of the customer * Develop tailored strategies and tactics to address the unique needs and challenges of each customer * Determine the resources required to execute the strategic account plan effectively * Continuously review and adjust the strategic account plan based on activities, feedback, changing market conditions and evolving customer needs * Develop and implement customized account strategic plans with clear next steps, specific strategies and tactics and appropriate utilization of resources while meeting the needs of our customers * Demonstrated collaborative efforts with cross-functional teams including marketing, medical affairs and market access to align and execute on account strategies to achieve common business objectives * Work with customer facing colleagues to facilitate achievement of the respective functional tactical objectives * Recognize changes in the work environment to ensure effective development and implementation of alternate plans to achieve objectives, modify call plan/business plan activities as needed * Strong ability to identify patterns and trends from multi-source data (OmniChannel) for divergent collaborative problem solving Teamwork & Collaboration: * Maintain an enterprise mindset and cross-functional thinking to maximize one Jazz customer engagement * Highly effective at leveraging cross-functional partnerships with marketing, medical affairs and market access with the goal to advance Business Unit and organizational interests * Engage and align with cross-functional partners to mobilize resources and ideas to deliver to successfully meet customer and patient needs * Actively shares insights and best practices across the team; demonstrates trust in others by consistently finding opportunities to contribute to their effectiveness and impact * Work effectively with customer facing colleagues to facilitate achievement of the respective functional teams' tactical objectives * Lead where appropriate as the main point of contact for designated accounts and collaborate with cross-functional partners to create a streamlined, organized interface between account stakeholders and all field facing colleagues Selling Effectiveness: * Effective promotion of Jazz Pharmaceuticals Adult Oncology products to physicians and other health care providers within the designated area at both community and Academic centers * Institute a network-selling mindset to customer relationships, seeing them as part of a connected healthcare ecosystem to broaden connections across an account * Stay abreast of industry trends, competitive landscape, and clinical developments in oncology to effectively communicate product differentiation and value proposition * Ability to adapt quickly to new tools and resources for successful customer engagement; leverages analytics to assist with developing insights and next best action plans * Identify, establish and maintain strong relationships with key physicians, health care providers and organizations within assigned territory Product and Scientific Knowledge: * Educate physicians and other health care professionals about Jazz Pharmaceuticals product(s), providing the most current information about the approved indications for the company's products within the current disease areas of focus: Small Cell Lung Cancer (SCLC) and Gastrointestinal (GI) Cancers * Demonstrates a superior level of effectiveness in communicating, educating, and consulting across multiple disease states * Effectively and appropriately responds to the customer's questions about other approved products/therapies, based on the clinical information contained in the package insert and per company compliance guidelines * Demonstrate to customers and internal team members a high level of clinical knowledge of a) the disease state, and b) Jazz product(s), based on the clinical information contained in the package insert * Demonstrates confidence in appropriately challenging prescribers about treatment decisions associated with assigned product Execution: * Participate in organizing and facilitating meetings for the exchange of medical and product information in line with the company's policies, regulatory and legal requirements * Represent company at live and virtual conferences, attend company meetings, educational events, training programs and functions as needed * Utilize CRM tools to effectively manage customer interactions, track sales activities and maintain accurate territory records * Present a positive and professional image of Jazz Pharmaceuticals, and ensure activities are consistent with and enhance the company's ethical pharmaceutical marketing policies and procedures * Special projects as assigned * Comply with all legal/regulatory guidelines of the Food, Drug and Cosmetic Act, the Prescription Drug Marketing Act, the Pharma Code, OIG guidelines, and all other applicable federal and state regulations * Perform all activities within allocated budget Required Experience * Four-year college/university degree * Experience in Oncology * Excellent verbal and written communication skills with an effective presentation style both in face to face and virtual interactions to connect and build credibility with healthcare professionals * Ability to meet territorial travel requirements Preferred Experience * Post-graduate business school study, training * Minimum of 5 years in the oncology market * Strong clinical, technical and scientific knowledge of product(s); applicable disease states desired * Strategic thinker who can drive a strategic account business plan * Strong key account management experience working in complex academic and community accounts, identifying influential stakeholders, and working with them to better serve patients * Demonstrated history of strong business acumen, problem solving, effective prioritization, account management and effective sales data analytics skills * Skillful in fostering teamwork and collaboration in cross-functional account management * Results oriented with a proactive and Self-motivated approach to driving sales growth * Experience with GI, HER2 landscape, biomarker driven therapeutics and/or Lung Cancer highly preferred * Key Account & Market dynamics knowledge Description of Physical Demands * Frequent travel between meeting sites * Frequently operating a computer, printer, telephone and other similar office machinery * Frequent interactions with external contacts in their office environment with little exposure to excessive noise, dust, fumes, vibrations and temperature changes * Frequent computer laptop or tablet use, not usually at a workstation * Responsibilities may require a work schedule that may include working outside of "normal" work hours, in order to meet business demands * Frequent public contact requiring appropriate business apparel #LI-Remote Jazz Pharmaceuticals is an equal opportunity/affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any characteristic protected by law. FOR US BASED CANDIDATES ONLY Jazz Pharmaceuticals, Inc. is committed to fair and equitable compensation practices and we strive to provide employees with total compensation packages that are market competitive. For this role, the full and complete base pay range is: $155,200.00 - $232,800.00 Individual compensation paid within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, and other pertinent factors. The goal is to ensure fair and competitive compensation aligned with the candidate's expertise and contributions, within the established pay framework and our Total Compensation philosophy. Internal equity considerations will also influence individual base pay decisions. This range will be reviewed on a regular basis. At Jazz, your base pay is only one part of your total compensation package. The successful candidate may also be eligible for a discretionary annual cash bonus or incentive compensation (depending on the role), in accordance with the terms of the Company's Global Cash Bonus Plan or Incentive Compensation Plan, as well as discretionary equity grants in accordance with Jazz's Long Term Equity Incentive Plan. The successful candidate will also be eligible to participate in various benefits offerings, including, but not limited to, medical, dental and vision insurance, 401k retirement savings plan, and flexible paid vacation. For more information on our Benefits offerings please click here: ___.

Senior Electrical Engineer - Position and Responsibilities As a Senior Electrical Engineer with Middough, you will perform engineering design within industrial power systems to include focus on AC power systems from 120V-15kV as well as PLC control systems with review/approval by a senior engineer. Responsibilities include, but are not limited to, the following: • Collect and prepare data/information and perform detailed engineering calculations (short circuit, voltage drop, cable/conduit/cable tray sizing, arc flash, lighting, heat trace, etc.)., • Design detailed drawing packages including electrical one-line diagrams, installation details, bills of material, panel schedules, lighting plans, motor schematics, conduit/cable plans, field wiring diagrams, etc., • Create specifications for various electrical equipment such as transformers, switchgear, motor control centers, etc., • Complete designs using the National Electric Code and other applicable standards., • Work with and provide direction to electrical designers., • Engineering Technology degree or Bachelor of Science in Electrical Engineering required with a focus in power systems., • 10+ years of Electrical Engineering experience., • PE license preferred., • Working knowledge of Microsoft Office products., • Strong analytical, problem-solving, and attention to detail abilities., • Strong organization and multitasking skills., • Remain in a stationary position, often standing or sitting for prolonged periods., • Frequently walk, reach with hands and arms, climb stairs, balance, stoop or kneel, bend or twist, use repeating motions that may include the wrists/hands/fingers and talk and hear., • Frequently use up-close vision, distance vision, depth perceptions, and the ability to adjust focus., • Should not expect adverse environmental conditions within company offices., • May be exposed to adverse environmental conditions (such as climbing ladders and/or stairs, extreme heat and/or cold, and/or poor air quality) if or when on-site at a client facility. Noise levels may be moderate to high at various client sites, hearing protection may be required and/or provided. Safety protections provided by the client and/or company are required to be used and followed., • May require occasional car or air travel to other company locations or client sites. What Middough Offers We offer a growth and learning culture which encourages and supports employee development through a wide variety of tools and resources such as the company Learning Management System, Middough Learning Center. Middough provides an opportunity to bring your talents and expertise to a successful and growing organization for your career advancement goals. Additionally, we offer a highly competitive compensation and the following comprehensive benefits package, based on eligibility and plan terms/changes: • A hybrid work model for work-life flexibility (based on business and client needs), • Medical, Dental, and Vision coverage, • Company paid Short/Long Term Disability, Life, AD&D, and Travel insurance, • Health Saving and Flexible Spending Accounts, • 401(k) Plan, • Paid Time Off, Company Paid Holidays, • Tuition Assistance, • Paid Certifications and Registrations (as applicable) Equal Opportunity Employment We are an equal opportunity employer and value diversity at our company. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, sex, gender identity, sexual orientation, pregnancy, status as a parent, national origin, age, disability (physical or mental), family medical history or genetic information, political affiliation, military service, or other non-merit based factors or any other protected characteristic under protected by federal, state, or local laws. Middough does not support sponsorship for any applicant that requires an employment visa (i.e., H-1B) to work lawfully in the US.

About Rotech Join a Leader in Home Healthcare At Rotech Healthcare Inc., we're more than a medical equipment provider-we're a trusted partner in patient care. As a national leader inventilators, oxygen therapy, sleep apnea treatment, wound care, diabetic solutions, and other home medical equipment, we empower patients to manage their health from the comfort of home. With hundreds of locations across 45 states, our team delivershigh-quality products,exceptional service, andcompassionate supportthat helps patients live more comfortably, independently, and actively. Whether you're a clinician, technician, or healthcare administrator, your work at Rotech directly improves lives. Explore more about our mission and services at Rotech.com. Overview and Responsibilities Location Manager - Home Healthcare Operations Lead with Purpose. Drive Performance. Improve Lives. Rotech Healthcare Inc. is seeking an experienced and mission-driven Location Manager to oversee daily operations at one of our home healthcare branches. If you have a background in healthcare management-especially in respiratory therapy or DME-and are passionate about delivering exceptional patient care through operational excellence, this is your opportunity to lead a high-impact team.In the State of NY, this position pays between $62,353.20/yr. - $65,000/yr., depending on related experience, plus bonus opportunity. Essential Job Duties and Responsibilities (Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.) • Manage day-to-day operations of the location on-site, ensuring compliance, efficiency, and profitability., • Lead and develop a team focused on delivering respiratory and DME services to patients in their homes., • Maintain strong relationships with referral sources, physicians, and healthcare partners., • Oversee inventory control, billing documentation, and regulatory compliance (Medicare, Medicaid, private insurance)., • Monitor KPIs including revenue, expenses, A/R aging, and service delivery metrics., • Conduct staff training, performance evaluations, and succession planning., • Ensure timely and accurate patient documentation, including Certificates of Medical Necessity (CMNs)., • Collaborate with regional leadership and corporate departments to meet strategic goals., • Participate in quality improvement initiatives and JCAHO compliance programs., • May assist with deliveries, on-call coverage, and patient support as needed., • Be part of a national leader in home respiratory and medical equipment services., • Lead a team that makes a real difference in patients' lives., • Enjoy competitive compensation, bonus opportunities, and comprehensive benefits. Qualifications Employment is contingent on • Background check (company-wide). Results will not be used automatically to disqualify individuals. Instead, the Company will conduct an individualized assessment that considers the duties of the position, the nature and timing of the offense, and any evidence of rehabilitation, in accordance with applicable laws., • Drug screen (when applicable for the position), • Compliance with healthcare facility credentialing process (when applicable for the position), • Florida: Must have two years of experience in business management or a college degree in business or a healthcare-related field, • North Carolina: Must hold a Bachelor's degree in health science, business administration, or a related field, plus at least one year of documented supervisory or management experience in home care or related health programs, • Wyoming: Must have a minimum of two years of full-time managerial or supervisory experience in a pharmacy or wholesale distributor, • Experience withmedical equipment,respiratory therapy, orDME services, • Familiarity withmedical billing,insurance reimbursement, andregulatory compliance, • Background inhealthcare administrationormedical record management, • At leastfour years of related work experience, • Working knowledge ofmedical terminology, • Strong attention to detail and ability tomulti-taskeffectively, • Excellentverbal and written communicationskills in English, • Ability to interpret and respond to various forms of communication (verbal, written, visual), • Maintainconfidentialityand handle sensitive information with discretion, • Demonstratedproblem-solving,time management, andorganizationalskills, • Capable of workingindependently and collaboratively within a team, • Proficient inMicrosoft Office(Outlook, Word, Excel), • Comfortable withemail communication,internet research, and usingoffice equipment (fax, copier, printer, phone, computer/tablet), • Ability tolift and transport equipmentas needed, • May be required todrive a company vehicle, participate inon-call rotations, and makehome deliveries, • Must be able tosit, stand, walk, talk, and listenfor extended periods Benefits • Generous paid time off and paid holidays, • Overtime pay for non-exempt positions (as applicable), • Commissionfor Account Executives, • Bonus and incentive opportunities, • Fixed and variable car reimbursement for Area Managers and Account Executives, • Car, mileage, and telephone reimbursement(as applicable), • Employee discount and recognition programs Employee Assistance Program (EAP) * 401(k), HSA, and FSA/Dependent Care FSA * Medical, prescription, dental, and vision coverage * Life insurance, disability, accidental death, identity protection, and legal services * Meru Health mental health and Mercer SmartConnect Medicare programs * Livongo Diabetes and High Blood Pressure programs * Healthcare Bluebook and RX Savings Solutions programs * Hepatitis B (HEPB) and TB vaccinations Make the right move-submit your resume today. Hiring managers review resumes and contact applicants whose experience aligns with the position. To check the status of a role you've applied for, ___. All positions are posted for a minimum of five (5) days and remain open until filled by a qualified applicant, generally no longer than 200 days. Thank you for your interest in Rotech Healthcare Inc.Flordia applicants - Background screening is required through the Florida Care Provider Background Screening Clearinghouse: ___ Equal Opportunity Employer of Minorities, Females, Protected Veterans and Individuals with Disabilities.Rotech Healthcare Inc. recruits, employs, trains, promotes, transfers, separates from employment and compensates employees without regard to membership in, association with, or perception of race, color, age, gender, gender identity, religion, creed, national origin, ancestry, citizenship, marital status, veteran status, sexual orientation, physical or mental disability, pregnancy or any other personal characteristic protected by applicable federal, state and local laws governing nondiscrimination in employment in each locality where Rotech has employees.

Job Description: Summary: This role provides the vision, strategy, functionality, and technology solutions for creating and maintaining distributed platforms for both public and private cloud infrastructure-based solutions. This entails the design and use of flexible platforms that deliver features, functionality, and services compatible with industry-leading providers while allowing legacy systems to interact safely when required. This position requires the necessary skills to provide technology research, evaluation, development, and delivery in support of infrastructure deployment solution lifecycles. This position collaborates with the Information Technology teams to lead the organization toward the deployment of technologies that may include PaaS, SaaS, hosted, and on-premises solutions - which will allow for flexible, secure, on-demand cloud-like functionality and services while endeavoring to provide resiliency and achieve cost reduction, while maintaining a highly secure and flexible environment. Essential Responsibilities/Accountabilities: Level I: • Acts as a high level escalation tier for operational support in assigned technical areas., • Conducts proof-of-concept testing in a lab environment., • Creates infrastructure design documents to outline production deployments., • Creates, updates, and maintains supporting documentation for technology standards., • Deploys new technology to production environment., • Designs infrastructure solutions to support business requirements., • Ensures assigned technologies are in alignment with the business., • Researches and implements hybrid cloud technology., • Supports high-level strategy for enterprise server environment., • Works directly with business stakeholders to gather IT infrastructure requirements., • Works with technology vendors and technical SMEs to produce corporate standards with regards to assigned technology areas, • Integrates multiple systems and/or technologies., • Acts as a team player with a high level of interpersonal skills., • Regular reliable attendance is expected and required., • Consistently demonstrates high standards of integrity by supporting the Lifetime Healthcare Companies' mission and values, adhering to the Corporate Code of Conduct, and leading to the Lifetime Way values and beliefs., • Executes good judgment and demonstrates personal accountability., • Maintains high regard for member privacy in accordance with the corporate privacy policies and procedures., • Performs other functions as assigned by management. Level II (In addition to Level I responsibilities): • Acts as a primary engineer for assigned technology areas., • Maintains a highly performant and optimized infrastructure environment., • Significant contributor to budget and expenditures for assigned technology areas., • Significant contributor to enterprise strategy in the assigned technology area., • Assists in the RFI/RFP Process. Level III (In addition to Level II responsibilities): • Assists with mentoring of lower-level engineers., • Establishes business justifications for purchases made within assigned technology areas., • Focuses on automation for job-related tasks., • Performs system analysis and capacity planning of computing assets., • Acts as primary SME for assigned technology areas., • Significant contributor to automation workflows., • Stays current with leading hybrid cloud technology for assigned technical areas. Level IV (In addition to level III responsibilities): • Acts as trusted advisor to the management team., • Emphasizes technology cost optimization when designing new solutions., • Serves as internal mentor for peers., • Leads business critical projects efforts for IT infrastructure., • Leads internal strategic efforts and collaborates with peers. Minimum Qualifications: NOTE: This description includes multiple levels of classification. The levels of classifications are differentiated by demonstrated knowledge, skills, and the ability to manage increasingly independent and/or complex assignments, broader responsibility, additional decision making and, in some cases, becoming a resource to others. New hires will be placed in the level for which they are most qualified based on their experience, credentials, and skills. Level I: • In lieu of degree, seven (7) cumulative years related work experience required. Associates degree in Computer Science, Information Technology, or related field with four (4) years of related experience required. Bachelor's degree preferred., • Awareness of security, compliance, and audit policies/procedures., • Experience with research, design, and implementation in assigned technologies., • Infrastructure operations and infrastructure project delivery experience essential., • Scripting and automation experience., • Strong communication skills., • Understanding of cloud computing infrastructure and concepts., • Knowledge of cloud and/or on-prem integration (i.e.: ability to integrate disparate systems)., • Demonstrates intermediate knowledge of a minimum of three (3) concepts and/or tools listed below: o VMware, Nutanix, or similar virtualization platform administration o Windows and/or Linux/Unix server administration o Azure o AWS o GCP o Terraform (or related IaC tool) o Ansible (or related configuration management technology) o Nutanix (or similar hyperconverged technology) o Vmware ESXi (or similar virtualization technology) o Linux o Windows Server o YAML (or similar markup) o JSON o REST API o GitHub (or related Git repository) o Azure DevOps o CI/CD Level II (in addition to Level I qualifications): • Intermediate knowledge of a minimum of four (4) concepts and/or tools listed above., • Intermediate Infrastructure operations and infrastructure project delivery experience., • Demonstrates strong technical documentation ability., • Experience with IT computing resource management and optimization., • High degree of business maturity and demonstrated confidentiality; executes good judgment., • Strong scripting and automation experience., • Intermediate knowledge of Disaster Recovery., • Intermediate knowledge of security, compliance, and audit policies/procedures. Level III (in addition to Level II qualifications): • Advanced knowledge of a minimum of four (4) concepts and/or tools listed above., • Advanced understanding of Disaster Recovery procedures related to IT infrastructure., • Ability to provide internal mentorship within team., • Professional certification in job-related technology., • Strategic vision in alignment with business objectives. Level IV (in addition to Level III qualifications): • Advanced knowledge of a minimum of five (5) concepts and/or tools listed above., • Demonstrated competence in team leadership/technical leadership, facilitation, and project leadership., • Extensive knowledge of hybrid cloud environment., • Proven ability to act as a mentor for peers. Physical Requirements: • Ability to complete work in a traditional office environment under fluorescent lighting., • Ability to orally communicate., • Must be able to function while sitting at a desk viewing a computer and using a keyboard and mouse for 3 or more hours at a time., • Must be able to travel across the enterprise., • Ability to work in a home office for continuous periods of time for business continuity., • Ability to provide on-call rotation support. In support of the Americans with Disabilities Act, this job description lists only those responsibilities and qualifications deemed essential to the position. Equal Opportunity Employer Compensation Range(s): Level III - Min 98,297 Mid 137,616 Max 176,935 Level IV - Min 110,093 Mid154,130 Max 198,168 The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position's minimum qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays. Please note: There may be opportunity for remote work within all jobs posted by the CDPHP Talent Acquisition team. This decision is made on a case-by-case basis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description: Summary: The Service Control/Operations Methodology at Excellus generally consists of the following disciplines: * • Asset and Configuration Management, • Incident/Problem/Change Management, • Service Desk The Asset-Configuration Management Analyst is specific to the Asset and Configuration Management Function at the Excellus Health Plan. This position oversees the daily and long-term strategic management of software and technology-related hardware within the organization. This position is responsible for the development, implementation, monitoring, administration and compliance of all IT Asset Management tools and services such as but not limited to tracking PC and Server lifecycles, software license compliancy and unauthorized software or hardware installations and usage. The incumbent will develop and implement procedures for tracking company assets to oversee quality control throughout. Essential Primary Responsibilities/Accountabilities: All Levels: Level I: • Works closely with Purchasing, Finance, Contracts, vendors and all areas within EIT to ensure that IT technology-related hardware and software assets are documented, accounted, and tracked throughout their entire lifecycle., • Plans, monitors, and records software and/or hardware licenses to ensure compliance with vendor contracts., • Utilizes ITAM tools, programs, and processes to manage IT inventory, complying with approved policy and guidelines., • Develops, creates and maintains associated custom connectors and scripts within the tool sets., • Compares licenses, warranties, maintenance agreements, and vendor contracts against audits to ensure compliance with internal and regulatory policies., • Performs inventory and usage monitoring of IT hardware and software and records for quality control and comparison against standard corporate practices., • Ensures all software running on company owned equipment has been approved for use within our environment by tracking and reporting on unauthorized installs; develops and executes associated remediation plan., • Performs reconciliations and remediations on all software., • Responsible for maintaining all discovery schedules and accuracy of all discovery models., • Develops metrics and runs reports to understand compliance position and risk., • Identifies cost-saving opportunities including standards definition and application rationalization efforts., • Explores opportunities to leverage unused IT assets to achieve full efficiency and ROI from company resources., • Performs software requisitioning for all business areas., • Consistently demonstrates high standards of integrity by supporting the Lifetime Healthcare Companies' mission and values, adhering to the Corporate Code of Conduct and leading to the Lifetime Way values and beliefs., • Maintains high regard for member privacy in accordance with the corporate privacy policies and procedures., • Regular and reliable attendance is expected and required., • Collaborates with peers in supporting, upgrading and/or replacing asset management tools as well as on the development of support documentation and reporting templates., • Responsible for implementing, configuring, and maintaining all ServiceNow CMDB (Configuration Management Database) processes, work instructions, and activities., • Performs, at minimum, quarterly process reviews and recommend CSI initiatives/opportunities for consideration and approval., • Performs auditing reports that highlight missing asset and configuration item's information, investigating reasons and recommending actions to prevent their recurrence., • Assists in the definition and registration of configuration items (Cis), driving toward the appropriate level of attributes and relationships required to support IT Service Management (ITSM) processes., • Maintains precise documentation and accurate usage of the CMDB., • Ensures all patterning for discovery and service mapping is accurately maintained., • Performs reconciliations between the CMDB and monitoring tools., • Understands and maintains all CMDB and Asset Management dashboards. Minimum Qualifications: NOTE: We include multiple levels of classification differentiated by demonstrated knowledge, skills, and the ability to manage increasingly independent and/or complex assignments, broader responsibility, additional decision making, and in some cases, becoming a resource to others. In addition to using this differentiated approach to place new hires, it also provides guideposts for employee development and promotional opportunities. Level I: • Bachelor's degree in Computer Science, Information Technology or relevant field (or four additional years related work experience in lieu of bachelors)., • Three years of experience in related field., • Experience in working within the ITIL Framework for Asset & Configuration Management including ITIL foundation level training., • Working knowledge of asset management design and implementation along with project management and process improvement preferred., • Solid understanding of end user licensing agreements and licensing types., • Experience with tools and processes of software distribution., • Strong written and verbal communication skills both technical and non-technical., • Proven analytical, planning and organizational skills., • Five years related work experience., • Certification in working within the ITIL Framework for Asset & Configuration Management including ITIL foundation level training., • Experience with configuration management tools as an administrator, preferably ServiceNow Discovery., • Experience maintaining baseline and CMDB using platforms such as ServiceNow., • Experience with SQL, JAVA, Visual Basic and Crystal Reports., • Working knowledge of software change control best practices and methodologies., • Working knowledge of asset management and configuration management design and implementation along with project management and process improvement preferred., • Advanced understanding of end user licensing agreements and licensing types., • Advanced experience with tools and processes of software distribution. Physical Requirements: • Ability to travel across regions. In support of the Americans with Disabilities Act, this job description lists only those responsibilities and qualifications deemed essential to the position. Equal Opportunity Employer Compensation Range(s): E4 - Min 65,346 Mid 91,484 Max 117,622 The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position's minimum qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays. Please note: There may be opportunity for remote work within all jobs posted by the CDPHP Talent Acquisition team. This decision is made on a case-by-case basis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Our solutions are a key part of most industries - electronics, medical research, renewable energy, food production, infrastructure and many more. Working with us means working with the latest technologies and groundbreaking, sustainable innovations. Join us on our journey for a better tomorrow. Location & Compensation \n • Buffalo, NY * Be part of an exciting journey as we prepare for production at our new facility in the Western New York Science & Technology Advanced Manufacturing Park (STAMP).\n, • Edwards Genesee location address: 6685 Crosby Rd Basom, NY 14013\n Essential Functions: \n • Aid in identifying, specifying, and testing new tooling to support CNC milling, turning, grinding, and deburring.\n, • Design, build, and test tooling and fixtures for process improvements.\n, • Fabricate, modify, and/or repair tooling, jigs, fixtures, and automation components.\n, • Provide manufacturing engineering support to the operational team as directed.\n, • Help maintain data system integrity by assisting with tasks such as change orders, non-conformance tracking, and system routing updates.\n, • Contribute to continuous improvement efforts that support goals in Safety, Quality, Delivery, Productivity, and Cost Performance.\n, • Assist in performing time studies for assembly processes to support proper routing and improve process flow.\n, • Help with the definition, setup, and preparation of job orders and manufacturing tooling as needed.\n, • Collaborate with colleagues, customers, and vendors to gather information, understand requirements, and assist in improving production techniques.\n, • Assist in creating and updating Standard Operating Procedures (SOPs) and technical specifications for manufacturing equipment.\n, • Help document designs, including creating drawings, specifications, and materials lists.\n, • Participate in training sessions on process, procedures, and documentation to help build and maintain workforce skills within assigned manufacturing areas.\n, • Maintain punctuality, work cooperatively in a team, and contribute positively to group efforts.\n, • Respectfully takes direction from [supervisor/ manager] and other duties as assigned.\n Education level • 2-3 years experience in manufacturing, machining, assembly or operations environment,\n, • Experience with CNC equipment - Milling, turning, and or/grinding\n, • CAD/CAM experience with Fusion 360, Inventor, Mastercam, Unigraphics, or other systems.\n, • Experience/knowledge of Kaizen, 6S, Lean Manufacturing.\n, • Strong analytical and problem-solving skills with the ability to prioritize work and manage multiple tasks.\n, • \nSitting/Stationary Positioning: Remains in a seated position frequently (about 40-50% of the time) for tasks such as designing, analyzing data, or using computer-aided design (CAD) software.\n, • \nHand and Finger Use/Dexterity: Uses hands to handle, control, or feel objects, tools, or controls occasionally to moderately (30-40% of the time), with manual dexterity and arm-hand steadiness for tasks like sketching, operating computers, or handling small tools; near vision required for detailed drawings or screens.\n, • \nStanding/Walking: Traverses moderate distances or remains in an upright stationary position frequently (30-40% of the time) to inspect production lines, collaborate with teams, or evaluate equipment on the shop floor.\n, • \nMoving Objects/Lifting/Carrying: Occasionally moves, transports, or positions objects weighing up to 20 pounds, such as tools, prototypes, or materials, during inspections or testing; requires minimal to moderate exertion for pushing or pulling equipment.\n, • \nBending/Twisting/Reaching: Positions self by bending, twisting, or stretching the body occasionally (20-30% of the time) to access equipment, inspect machinery, or reach workstations; moderate flexibility needed.\n, • \nRepetitive Motions: Performs repetitive actions occasionally (20-30% of the time), such as typing or adjusting equipment, requiring sustained focus but minimal stamina compared to manual labor roles.\n, • \nOther Environmental Factors: Frequently exposed to moderate noise levels (e.g., machinery, production environments) and occasionally to contaminants or hazardous equipment (20-30% of the time); may wear protective equipment (e.g., safety glasses, hard hats, or hearing protection) when on the shop floor (30-50% of the time); works in both office and manufacturing settings with constant interaction with others.\nIn return, we offer \n, • Culture of trust and accountability\n, • Lifelong learning and career growth\n, • Innovation powered by people\n, • Comprehensive compensation and benefits\n Annual Variable Compensation Bonus, Medical, Dental, Vision, 401k with Company Match, Paid Vacation, Paid Sick Time, Paid Floating Holidays, Tuition Reimbursement, Training and Development, Parental Leave, Disability Benefits, Life and AD&D Insurance. What you can expect from us: • Excellent working conditionsand benefits., • Part of the Atlas Copco Group with a wide-reaching internal job market., • Work in a global, diverse and dynamic environment., • You can grow with us: we always look for internal candidates before checking the market and have training and development programs., • We have a friendly, family-like atmosphere - and that is not just a claim on the wall, it's a true fact., • You can be creative and promote your own ideas. No person shall be denied the equal protection of the laws of this state or any subdivision thereof. No person shall, because of race, color, ethnicity, national origin, age, disability, creed [or], religion, or sex, including sexual orientation, gender identity, gender expression, pregnancy, pregnancy outcomes, and reproductive healthcare and autonomy, be subjected to any discrimination in [his or her] their civil rights by any other person or by any firm, corporation, or institution, or by the state or any agency or subdivision of the state, pursuant to law. Edwards is a global leader of vacuum and abatement systems. We are proud to lead the industry, pushing the boundaries of science to deliver innovative products which are intrinsic to everyday life, working in partnership with our customers and continually setting new standards. With over 150 years of rich heritage, Atlas Copco Group is the partner of choice for tens of thousands of customers in critical applications around the world. Vacuum is required in diverse sectors, from the generation of power to the production of steel, to the challenging environments of space simulation and high energy physics research. At Edwards, we believe there is always a better way. Our employees are full of ideas. When looking to add a new team member, we are looking for someone that can appreciate what the Edwards Team has done and bring their new ideas and perspective to enhance where we can go. At Edwards you get to be part of something big; we work globally, but also get the opportunity make a difference locally in our own discipline. We work hard to attract, motivate, develop and retain the best talent from the diversity of people across the globe. Our vision to be First in Mind, First in Choice relies on this strategy. We are an Equal Opportunity Employer. For more information about Edwards visit our website: A division of Atlas Copco Diverse by nature and inclusive by choice Bright ideas come from all of us. The more unique perspectives we embrace, the more innovative we are. Together we build a culture where difference is valued and we share a deep sense of purpose and belonging.

Western Door Federal is part of the Seneca Nation Group (SNG) portfolio of companies. SNG is Seneca Holdings' federal government contracting business that meets mission-critical needs of federal civilian, defense, and intelligence community customers. Our portfolio comprises multiple subsidiaries that participate in the Small Business Administration 8(a) program. To learn more about SNG, visit___ and follow us on___. Our team of talented individuals is what makes us successful. To support our team, we provide a balanced mix of benefits and programs.Your total rewards package includes competitive pay, benefits, and perks, flexible work-life balance, professional development opportunities, and performance and recognition programs. We offer a comprehensive benefits package that includes medical, dental, vision, life, and disability, voluntary benefit programs (critical illness, hospital, and accident), health savings and flexible spending accounts, and retirement 401K plan. One of our fundamental principles is to offer competitive health and welfare benefits to our team members, providing coverage and care for you and your family. Full-time employees working at least 30 hours a week on a regular basis are eligible to participate in our benefits and paid leave programs. We pride ourselves on our collaborative work environment and culture, which embraces our mission of providing financial and non-financial benefits back to the members of the Seneca Nation. Western Door Federalis seeking aPower Platform Engineer to support a program with the United States Military Academy - West Point. The objective of this work is to provide comprehensive cloud solution services, hosted in MS Azure, as part of a larger team. This Engineer will be the technical lead for designing, developing, and implementing solutions using the Microsoft Power Platform (Power Apps, Power Automate, Power BI, Dataverse) within an enterprise environment. The ideal candidate will have strengths with Dataverse and solid working experience with governance and Power Platform COE. Key Responsibilities: • Design & Develop Power Platform Solutions: Create custom business applications using Power Apps (Canvas and Model-Driven Apps) and Dataverse and develop automation workflows using Power Automate to address enterprise needs., • Integration with Microsoft Ecosystem: Integrate Power Platform solutions with other Microsoft and cloud services, including SharePoint Online, Azure PaaS such as Azure Functions, Azure SQL Database, and Power BI for reporting, ensuring seamless data flow across systems., • End-to-End Solution Delivery: Lead all phases of the solution lifecycle - from requirements gathering and design, to development, testing, and deployment of Power Platform solutions. Ensure solutions are robust, secure, and scalable., • Collaboration & Requirements Gathering: Work closely with stakeholders to understand business processes and translate requirements into technical specifications and effective Power Platform solutions. Provide guidance on platform capabilities and best practices., • Quality Assurance: Provide acceptance criteria and conduct thorough unit/developer testing for Power Apps and flows. Debug and resolve issues, ensuring high-quality, bug-free deliverables that meet end-user requirements., • Documentation & Training: Create and maintain technical documentation, including solution design documents, and collaborate on user guides and support manuals., • Technical Leadership & Innovation: Serve as the Power Platform Subject Matter Expert (SME) for the team. Stay up to date with the latest Power Platform features, best practices. Lead or mentor junior developers if applicable, and provide insights on improving development processes, governance, and use of the Power Platform Center of Excellence (CoE) toolkit., • Must be a US Citizen, • Bachelor's degree in computer science, Information Systems, or a related field. (Equivalent professional experience may be considered.), • Minimum 5 years of experience developing solutions with Microsoft Power Platform (Power Apps, Power Automate, Power BI, and Dataverse)., • Proven ability to build complexCanvas and Model-Driven apps, automate workflows, and integrate with external data sources., • Experience with Power Platform Center of Excellence (COE)., • Hands on experience withMicrosoft 365 and Azure ecosystem - including integrating Power Platform with SharePoint, using Azure Functions or other Azure PaaS services for custom business logic, and connecting to Azure SQL or other databases., • Strong understanding of relational database concepts and data modeling., • Experience and expertise with at least one programming or scripting language (e.g. C#, .NET, JavaScript/TypeScript, SQL) to extend Power Platform capabilities (such as writing plugins, custom connectors, or Azure Function code) is required., • Experience with data and document migration and integration with external data sources., • Experience with 3rd party tools or technologies including: PostMan, Fiddler, XRMToolBox, XRMToolKit and migration tools such as KingswaySoft and Azure Data Factory is a plus., • Experience with source control and DevOps (Azure DevOps or GitHub) for CI/CD pipelines in Power Platform projects is a plus., • DoD 8140/8570 IAT Level II certification such as CompTIA Security+ (Security Plus) certification (or higher) is required., • Excellent communication and stakeholder engagement skills., • Ability to work independently as an individual contributor while collaborating effectively in a cross-functional team., • Strong problem-solving skills and the ability to translate business requirements into technical solutions., • Ability to manage multiple tasks and projects concurrently in a dynamic environment., • Familiarity with Agile development methodologies and participation in Agile/DevOps processes., • Advanced Power Platform Expertise: Microsoft Power Platform certifications (e.g., Power Platform Fundamentals PL-900, Power Platform Developer PL-400 or Solution Architect PL-600 certifications) is highly desirable, demonstrating formal expertise., • Experience with Power BI development for dashboards/reports and Power Pages/Power Portals Knowledge of Microsoft Teams and SharePoint Online integrations., • Experience developing custom web components or services using Azure PAAS services or the .NET stack to extend Power Platform capabilities. Familiarity with REST APIs and integrating third-party services/data. Equal Opportunity Statement: Seneca Holdings provides equal employment opportunities to all employees and applicants without regard to race, color, religion, sex/gender, sexual orientation, national origin, age, disability, marital status, genetic information and/or predisposing genetic characteristics, victim of domestic violence status, veteran status, or other protected class status. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation and training. The Company also prohibits retaliation against any employee who exercises his or her rights under applicable anti-discrimination laws. Notwithstanding the foregoing, the Company does give hiring preference to Seneca or Native individuals. Veterans with expertise in these areas are highly encouraged to apply.

CI Azumano Travelis Seneca Holdings' full-service travel management company for businesses, governments, and personal travelers. We offer 24/7 support for travelers while also supporting customers with travel expense management, policy implementation, technology solutions, business intelligence tools, and vendor negotiations. Our team of talented individuals is what makes us successful. To support our team, we provide a balanced mix of benefits and programs.Your total rewards package includes competitive pay, benefits, and perks, flexible work-life balance, professional development opportunities, and performance and recognition programs. We offer a comprehensive benefits package that includes medical, dental, vision, life, and disability, voluntary benefit programs (critical illness, hospital, and accident), health savings and flexible spending accounts, and retirement 401K plan. One of our fundamental principles is to offer competitive health and welfare benefits to our team members, providing coverage and care for you and your family. Full-time employees working at least 30 hours a week on a regular basis are eligible to participate in our benefits and paid leave programs. We pride ourselves on our collaborative work environment and culture, which embraces our mission of providing financial and non-financial benefits back to the members of the Seneca Nation. CI Azumano is seeking a Senior Technology Specialist to join our growing team. This is a remote position. TheSenior Technology Specialist serves as a technical expert and trusted advisor responsible for the design, implementation, optimization, and support of complex technology solutions across the organization. This role bridges strategic IT objectives with handson technical execution, ensuring systems are secure, scalable, and aligned with business needs. The Senior Technology Specialist provides advanced troubleshooting, mentors junior staff, contributes to architectural decisions, and partners with stakeholders to drive continuous improvement, operational excellence, and innovation. Roles and Responsibilities include but are not limited to: Technical Leadership & Execution • Design, implement, and maintain enterprise technology solutions across on-premise infrastructure, cloud, applications, security, and/or collaboration platforms., • Serve as a subject matter expert (SME) for assigned technologies, providing Tier 3/4 support and rootcause analysis for complex issues., • Lead technical deployments, upgrades, integrations, and migrations with minimal disruption to operations., • Contribute to system architecture, technology roadmaps, and lifecycle planning., • Evaluate emerging technologies and provide recommendations aligned with business and security requirements., • Ensure solutions adhere to organizational, regulatory, and security standards (e.g., NIST, ISO, CUI, etc., as applicable)., • Architect, implement, and manage Microsoft 365 services, including:, • Exchange Online Teams (including governance, recording, retention, and eDiscovery considerations) SharePoint Online and OneDrive Entra ID / Azure AD (identity, access control, conditional access), • Microsoft Defender security suite Design and enforce Microsoft 365 governance frameworks, including:, • Tenant security configuration baselines, • Data classification, retention, and lifecycle policies, • External sharing and guest access controls, • Lead M365 migrations, tenant consolidations, hybrid integrations, and major platform upgrades., • Implement security controls and configurations to protect systems and data., • Participate in vulnerability remediation, incident response, and audit readiness activities., • Support technical compliance execution for government and regulated frameworks, such as:, • NIST SP 800 53 / 800 171, • FedRAMP (supporting cloud adjacent controls), • CJIS, HIPAA, or state specific cybersecurity requirements (as applicable), • Translate compliance requirements into technical controls, configurations, and operational processes., • Lead effort for:, • System Security Plans (SSPs), • POA&Ms, • Control implementation evidence, • Audit and assessment readiness, • Ensure M365 and related systems support CUI protection, data residency, logging, auditability, and access control mandates., • Partner with business units, vendors, and IT leadership to gather requirements and translate them into technical solutions., • Serve as a technical liaison between engineering teams and management., • Create and maintain technical documentation, diagrams, runbooks, and standard operating procedures (SOPs)., • Mentor junior engineers and specialists through coaching, knowledge transfer, and technical review., • Bachelor's degree in Information Technology, Computer Science, or a related field (or equivalent experience)., • 7+ years of progressively responsible experience in enterprise IT environments., • Advanced experience in one or more of the following areas:, • Cloud platforms (e.g., Microsoft Azure, AWS), • Microsoft 365 / identity platforms, • Infrastructure (compute, storage, virtualization), • Networking and security technologies, • Enterprise applications and integrations, • Proven ability to troubleshoot complex, crossplatform technical issues., • Relevant certifications (e.g., Microsoft, AWS, VMware, Security+, CISSP, or equivalent)., • Experience in regulated or governmentcontract environments., • Experience with automation, scripting, or infrastructureascode., • Technical depth and problemsolving, • Systems thinking and attention to detail, • Securityfirst mindset, • Continuous improvement orientation, • Mentorship and teamwork, • Ability to balance strategic thinking with handson execution Equal Opportunity Statement: Seneca Holdings provides equal employment opportunities to all employees and applicants without regard to race, color, religion, sex/gender, sexual orientation, national origin, age, disability, marital status, genetic information and/or predisposing genetic characteristics, victim of domestic violence status, veteran status, or other protected class status. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation and training. The Company also prohibits retaliation against any employee who exercises his or her rights under applicable anti-discrimination laws. Notwithstanding the foregoing, the Company does give hiring preference to Seneca or Native individuals. Veterans with expertise in these areas are highly encouraged to apply.

Location & Compensation • Buffalo, NY * Be part of an exciting journey as we prepare for production at our new facility in the Western New York Science & Technology Advanced Manufacturing Park (STAMP)., • Edwards Genesee location address: 6685 Crosby Rd Basom, NY 14013 Your role The Assembly & Test Team Leader is responsible for control at shop floor level of day to day production activities within a defined component or product cell to achieve product quality and delivery commitments in an effective manner. Team leaders are the first line of decision making, working within the framework established by the Production manager. Team Leaders are expected to carry out production tasks as and when required in support of their team. • Assemble and test modules, cables and dry pumps in line with the daily production plan - focusing on quality and output targets., • Maintain a safe and clean work area., • Follows assembly and test instructions and procedures to meet output quality requirements., • Leads the training of team members and collaborates to drive improvement and efficiency., • Maintaining a good working relationship with department colleagues and the supporting departments., • Perform quality work checks to ensure the assembly meets quality standards., • Sets clear and achievable targets for teams daily activities, and ensures that the team understands its responsibilities, • Communicates customer needs to the team and esures team meets customer committed schedule of output, • Motivates the team, by giving advice and encouragement as needed, • Responsible for team performance cycle, including performance reviews, improvements plans and disciplinary actions To succeed, you will need The ability to perform essential job duties with or without reasonable accommodation and without posing a direct threat to safety or health of employees or others. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential duties. Education Level: • 6S's; Material Requirements Planning (MRP) computerised applications; daily planning systems; supply chain; logistics., • Has continuous improvement mindset., • Experienced in problem solving. Physical Demands This role emphasizes repetitive assembly tasks, often on a line, requiring fine motor skills and endurance. Hand and Finger Use/Dexterity: Uses hands to handle, control, or feel objects, tools, or controls continually or almost continually (85% of the time), with manual and finger dexterity for grasping, manipulating, or assembling small objects; arm-hand steadiness for stability. Standing/Walking: Remains in an upright stationary position continually or almost continually (41% of the time), with occasional traversing. Moving Objects/Lifting/Carrying: Frequently moves, transports, or positions materials, involving exertion up to 10 pounds occasionally or negligible amounts frequently; trunk strength for repeated support. Bending/Twisting/Reaching: Positions self by bending or twisting the body continually or almost continually (26% of the time), requiring flexibility. Repetitive Motions: Performs repetitive actions continually or almost continually (48% of the time), often involving prolonged sitting or standing with repetitive arm/leg use. Other Environmental Factors: Exposed to noise, contaminants, or distractions daily (41-52% of the time); wears protective equipment (e.g., gloves, safety shoes) every day (91% of the time). In return, we offer • Culture of trust and accountability, • Lifelong learning and career growth, • Innovation powered by people, • Comprehensive compensation and benefits, • Health and well-being Benefits Summary: Annual Variable Compensation Bonus, Medical, Dental, Vision, 401k with Company Match, Paid Vacation, Paid Sick Time, Paid Floating Holidays, Tuition Reimbursement, Training and Development, Parental Leave, Disability Benefits, Life and AD&D Insurance. What you can expect from us: Excellent working conditions and benefits. Part of the Atlas Copco Group with a wide-reaching internal job market. Work in a global, diverse and dynamic environment. You can grow with us: we always look for internal candidates before checking the market and have training and development programs. We have a friendly, family-like atmosphere - and that is not just a claim on the wall, it's a true fact. You can be creative and promote your own ideas. Every day brings new challenges and new things to learn. We're an Equal Opportunity Employer Edwards Company considers for employment and hires qualified candidates without regard to race, religion, color, sex, sexual orientation, genetic information, gender, gender identity, gender expression, age, national origin, ancestry, citizenship, protected veteran or disability status or any factor prohibited by law, and as such affirms in policy and practice to support and promote the concept of equal employment opportunity and affirmative action, in accordance with all applicable federal, state, provincial and municipal laws. No person shall be denied the equal protection of the laws of this state or any subdivision thereof. No person shall, because of race, color, ethnicity, national origin, age, disability, creed [or], religion, or sex, including sexual orientation, gender identity, gender expression, pregnancy, pregnancy outcomes, and reproductive healthcare and autonomy, be subjected to any discrimination in [his or her] their civil rights by any other person or by any firm, corporation, or institution, or by the state or any agency or subdivision of the state, pursuant to law. Edwards is a global leader of vacuum and abatement systems. We are proud to lead the industry, pushing the boundaries of science to deliver innovative products which are intrinsic to everyday life, working in partnership with our customers and continually setting new standards. With over 150 years of rich heritage, Atlas Copco Group is the partner of choice for tens of thousands of customers in critical applications around the world. Vacuum is required in diverse sectors, from the generation of power to the production of steel, to the challenging environments of space simulation and high energy physics research. At Edwards, we believe there is always a better way. Our employees are full of ideas. When looking to add a new team member, we are looking for someone that can appreciate what the Edwards Team has done and bring their new ideas and perspective to enhance where we can go. At Edwards you get to be part of something big; we work globally, but also get the opportunity make a difference locally in our own discipline. We work hard to attract, motivate, develop and retain the best talent from the diversity of people across the globe. Our vision to be First in Mind, First in Choice relies on this strategy. We are an Equal Opportunity Employer. For more information about Edwards visit our website: A division of Atlas Copco About Edwards Edwards is a leading developer and manufacturer of sophisticated vacuum products, exhaust management systems and related value-added services. Edwards solutions are integral to manufacturing processes for semiconductors, flat panel displays, LEDs and solar cells. They are also used within an increasingly diverse range of industrial processes including power, glass and other coating applications; steel and other metallurgy; pharmaceutical and chemical; and for scientific instruments in a wide range of R&D applications. Edwards has over 4,000 employees worldwide engaged in the design, manufacture and support of high technology vacuum and exhaust management equipment. Edwards has state-of-the-art manufacturing facilities in Europe, Asia and North America.

Location & Compensation \n • Buffalo, NY * Be part of an exciting journey as we prepare for production at our new facility in the Western New York Science & Technology Advanced Manufacturing Park (STAMP).\n, • Edwards Genesee location address: 6685 Crosby Rd Basom, NY 14013\n Sr. Manufacturing Engineer The Sr. Manufacturing Engineer is responsible for developing and implementing new processes and capabilities in house or externally to reduce the product cost of the assembly operation. Essential Functions \n • Work closely with Korean engineers and equipment vendors to understand current processes at existing pump facilities in Korea.\n, • Implement processes into new plant in Genesee, NY including qualification, installation, and validation of new equipment and associated documentation.\n, • Assist with the specification, location, acquisition, and installation of new equipment into the facility.\n, • Provide manufacturing engineering support to the operational team where needed.\n, • Implement changes to data systems and maintain data system integrity; charges include, but are not limited to change orders, non-conformance tracking, system routings\n, • Drive continuous improvement initiatives in support of departmental, site and corporate objectives for Safety, Quality, Delivery, Productivity, and Cost Performance\n, • Performs time studies for the assembly processes to create the correct routings and to optimize the balancing of the assembly process.\n, • Accounts for the definition, setup, preparation and optimization of Job orders and manufacturing tooling.\n, • Interface with colleagues, customers, vendors and others to understand requirements, assess feasibility of new/existing products, and improve production techniques\n, • Creates and maintains of SOP (Standard Operating Procedures), technical specifications for manufacturing equipment, test specs.\n, • Document designs with drawings, specification and materials list\n, • Performs active training process, procedures, documentation, and traceability to create and sustain the workforce competences within the allocated manufacturing cells.\n, • Maintains punctual, regular and predictable attendance; works collaboratively in a team environment with a spirit of cooperation.\n, • Respectfully takes direction from [supervisor/ manager] and other duties as assigned.\n, • This position will initially report to the Project Manager in Genesee, NY but will transition to report to the Manufacturing Engineering Manager as the site staff is implemented\n\n The ability to perform essential job duties with or without reasonable accommodation and without posing a direct threat to safety or health of employee or others. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties. Skills and Qualifications Education level • Experience/knowledge of Kaizen, 6S, Lean Manufacturing.\n, • Strong analytical and problem-solving skills with the ability to prioritize work and manage multiple tasks.\n, • Advanced Excel, Word, Autocad, Project, Solidworks\n, • Working knowledge of ERP systems (SAP benneficial).\n\n Other requirements \n • Strong English verbal and written communication skills; Korean language skills a benefit.\n, • Experience in project management and leading improvement projects.\n\n Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Physical Demands This role involves a mix of desk-based engineering tasks, on-site inspections, and interaction with manufacturing processes, requiring moderate physical activity in varied environments. \n • \nSitting/Stationary Positioning: Remains in a seated position frequently (about 40-50% of the time) for tasks such as designing, analyzing data, or using computer-aided design (CAD) software.\n, • \nHand and Finger Use/Dexterity: Uses hands to handle, control, or feel objects, tools, or controls occasionally to moderately (30-40% of the time), with manual dexterity and arm-hand steadiness for tasks like sketching, operating computers, or handling small tools; near vision required for detailed drawings or screens.\n, • \nStanding/Walking: Traverses moderate distances or remains in an upright stationary position frequently (30-40% of the time) to inspect production lines, collaborate with teams, or evaluate equipment on the shop floor.\n, • \nMoving Objects/Lifting/Carrying: Occasionally moves, transports, or positions objects weighing up to 20 pounds, such as tools, prototypes, or materials, during inspections or testing; requires minimal to moderate exertion for pushing or pulling equipment.\n, • \nBending/Twisting/Reaching: Positions self by bending, twisting, or stretching the body occasionally (20-30% of the time) to access equipment, inspect machinery, or reach workstations; moderate flexibility needed.\n, • \nRepetitive Motions: Performs repetitive actions occasionally (20-30% of the time), such as typing or adjusting equipment, requiring sustained focus but minimal stamina compared to manual labor roles.\n, • \nOther Environmental Factors: Frequently exposed to moderate noise levels (e.g., machinery, production environments) and occasionally to contaminants or hazardous equipment (20-30% of the time); may wear protective equipment (e.g., safety glasses, hard hats, or hearing protection) when on the shop floor (30-50% of the time); works in both office and manufacturing settings with constant interaction with others.\n\n In return, we offer \n • Culture of trust and accountability\n, • Lifelong learning and career growth\n, • Innovation powered by people\n, • Comprehensive compensation and benefits\n, • Health and well-being\n\n Benefits Summary: Annual Variable Compensation Bonus, Medical, Dental, Vision, 401k with Company Match, Paid Vacation, Paid Sick Time, Paid Floating Holidays, Tuition Reimbursement, Training and Development, Parental Leave, Disability Benefits, Life and AD&D Insurance. What you can expect from us: • Excellent working conditions and benefits., • Part of the Atlas Copco Group with a wide-reaching internal job market., • Work in a global, diverse and dynamic environment., • You can grow with us: we always look for internal candidates before checking the market and have training and development programs., • We have a friendly, family-like atmosphere - and that is not just a claim on the wall, it's a true fact., • You can be creative and promote your own ideas., • Every day brings new challenges and new things to learn. We're an Equal Opportunity Employer Edwards Company considers for employment and hires qualified candidates without regard to race, religion, color, sex, sexual orientation, genetic information, gender, gender identity, gender expression, age, national origin, ancestry, citizenship, protected veteran or disability status or any factor prohibited by law, and as such affirms in policy and practice to support and promote the concept of equal employment opportunity and affirmative action, in accordance with all applicable federal, state, provincial and municipal laws. No person shall be denied the equal protection of the laws of this state or any subdivision thereof. No person shall, because of race, color, ethnicity, national origin, age, disability, creed [or], religion, or sex, including sexual orientation, gender identity, gender expression, pregnancy, pregnancy outcomes, and reproductive healthcare and autonomy, be subjected to any discrimination in [his or her] their civil rights by any other person or by any firm, corporation, or institution, or by the state or any agency or subdivision of the state, pursuant to law. Edwards is a global leader of vacuum and abatement systems. We are proud to lead the industry, pushing the boundaries of science to deliver innovative products which are intrinsic to everyday life, working in partnership with our customers and continually setting new standards. With over 150 years of rich heritage, Atlas Copco Group is the partner of choice for tens of thousands of customers in critical applications around the world. Vacuum is required in diverse sectors, from the generation of power to the production of steel, to the challenging environments of space simulation and high energy physics research. At Edwards, we believe there is always a better way. Our employees are full of ideas. When looking to add a new team member, we are looking for someone that can appreciate what the Edwards Team has done and bring their new ideas and perspective to enhance where we can go. At Edwards you get to be part of something big; we work globally, but also get the opportunity make a difference locally in our own discipline. We work hard to attract, motivate, develop and retain the best talent from the diversity of people across the globe. Our vision to be First in Mind, First in Choice relies on this strategy. We are an Equal Opportunity Employer. For more information about Edwards visit our website: A division of Atlas Copco About Edwards Edwards is a leading developer and manufacturer of sophisticated vacuum products, exhaust management systems and related value-added services. Edwards solutions are integral to manufacturing processes for semiconductors, flat panel displays, LEDs and solar cells. They are also used within an increasingly diverse range of industrial processes including power, glass and other coating applications; steel and other metallurgy; pharmaceutical and chemical; and for scientific instruments in a wide range of R&D applications. Edwards has over 4,000 employees worldwide engaged in the design, manufacture and support of high technology vacuum and exhaust management equipment. Edwards has state-of-the-art manufacturing facilities in Europe, Asia and North America.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: PWB Designer Reporting To: Supervisor, Drafting (MSD) Work Schedule: Onsite - Buffalo, NY Moog is the world-wide leader of advanced flight controls and actuation for commercial and military aircraft. We are positioned on virtually every aircraft flying today, supplying highly reliable systems that are supportable and add significant value for our customers. The defense sector within our Space and Defense group is seeking a PWB Designer to join their group. This position will be an onsite position and work closely with Electrical Design Engineering, and occasionally Mechanical and Manufacturing Engineering, to help develop their thoughts and sketches. To be considered for this role, here's what you'll need to bring with you: \n • Bachelor of Science or Technology Degree (BT) in Electrical Engineering or other relevant Engineering degree.\n, • Or an Associates Degree in a technical Major and at least 2 years of Printed Wiring Board Layout Design and Drafting experience.\n, • Working knowledge of engineering principles, documentation standards, and drafting practices, including spatial visualization\n, • Possess above average understanding of electronic circuits, electrical component properties, electronic packaging, PWB and CCA materials, as well comprehensive knowledge of, and the capability to design to the requirements of IPC, Space, Military and Commercial standards and specifications.\n, • Advanced experience and knowledge schematic entry and PWB layout/route.\n, • Utilization of OrCAD Schematic Entry and Cadence Allegro PWB layout ECAD design software is desirable.\n, • Experience using Siemens NX 3D MCAD software or Solidworks is a plus. Knowledge and use of Teamcenter PLM is preferred.\n, • Working knowledge of configuration management control of product design.\n, • Prior experience in the Aerospace industry is preferred.\n\n As a PWB Designer, your day-to-day work would include: \n • Translation of requirements emanating from a variety of sources used to generate Schematics, Netlists, PWB layouts, Master Pattern (Artwork), 3D/Solid models, layouts and detailed engineering drawings as well as supporting electronic data for PWB fabrication and CCA manufacturing.\n, • In conjunction with an Engineering Designer, Electrical Team Lead, or Senior Circuit Board Designer, ensuring that the detailed integrity of Schematic, PWB layout, BOM and Manufacturing data meets the intended PWB and CCA design requirements.\n, • Occasionally directing the efforts of drafting personnel in the completion of their tasks. This effort includes direction and input based on familiarity with the Moog Systems and Procedures, MBS (Moog Business System), Moog Release/Change workflow process, and configuration control requirements., • Responsibilities will include directing drafting personnel in support of completion of their tasks. This may include, but limited to using their understanding of Moog operating systems for the incorporation of documentation within Moog's CAD, configuration control and ERP systems.\n\n, • Creating and checking detailed drawings for completeness and accuracy, ensures the parts list in Moog's PLM (Teamcenter) and MBS is accurate and complete.\n, • Contributing to a cost-effective design and functional products by working closely with Design Engineering and Manufacturing Engineering.\n, • Suggesting or specifying (for non-critical situations) materials to conform to design.\n\n How we care for you: • Financial Rewards: great compensation package, annual profit sharing, matching 401k and the ability to participate in Employee Stock Purchase Plan, Flexible Spending and Health Savings Accounts \n, • Work/Life Balance: Flexible paid time off, holidays and parental leave program, relocation assistance \n, • Health & Welfare: Comprehensive insurance coverage including medical, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages \n, • Professional Skills Development: Tuition Assistance, mentorship and coaching opportunities, leadership development and other personal growth programs \n\n, • Collaborative and Welcoming Workplace: Inclusive culture rooted in our values, enhanced by Employee Resource Groups, and team-building activities.\n, • Additional site-specific benefits may be offered\n\n Salary Range Transparency: Buffalo, NY $65,000.00-$100,000.00 Annually Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787. No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Absent compliance with these pre-conditions resumes submitted directly to any Moog Inc. employee or affiliate will not qualify for fee payment, and therefore become the property of Moog Inc.

Location & Compensation \n • Buffalo, NY * Be part of an exciting journey as we prepare for production at our new facility in the Western New York Science & Technology Advanced Manufacturing Park (STAMP).\n, • Edwards Genesee location address: 6685 Crosby Rd Basom, NY 14013\n Your role The Manufacturing Engineer - CNC supports the development, automation, cost optimization, and continuous improvement within our CNC mill-turn, CNC grinding, and secondary operations Essential Functions: \n • Aid in identifying, specifying, and installing new equipment within the facility.\n, • Provide basic manufacturing engineering support to the operational team as directed.\n, • Help maintain data system integrity by assisting with tasks such as change orders, non-conformance tracking, and system routing updates.\n, • Contribute to continuous improvement efforts that support goals in Safety, Quality, Delivery, Productivity, and Cost Performance.\n, • Assist in performing time studies for assembly processes to support proper routing and improve process flow.\n, • Help with the definition, setup, and preparation of job orders and manufacturing tooling as needed.\n, • Collaborate with colleagues, customers, and vendors to gather information, understand requirements, and assist in improving production techniques.\n, • Assist in creating and updating Standard Operating Procedures (SOPs) and technical specifications for manufacturing equipment.\n, • Help document designs, including creating drawings, specifications, and materials lists.\n, • Participate in training sessions on process, procedures, and documentation to help build and maintain workforce skills within assigned manufacturing areas.\n, • Maintain punctuality, work cooperatively in a team, and contribute positively to group efforts.\n, • Respectfully takes direction from [supervisor/ manager] and other duties as assigned.\n, • This position will report to the Manufacturing Engineering Manager.\n\n To succeed, you will need Ability to perform essential job duties with or without reasonable accommodation and without posing a direct threat to safety or health of employee or others. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties. • \nEducation level, • Bachelor degree in engineering, mechanical or manufacturing preferred. Industry experience would be considered in the absence of a degree.\n Relevant Previous experience \n • 2-3 years experience in manufacturing, machining, assembly or operations environment,\n, • Experience with CNC equipment - Mill-turn and/or OD Grinding Preferred,\n\n Knowledge areas/Skills \n • Experience/knowledge of Kaizen, 6S, Lean Manufacturing.\n, • Strong analytical and problem-solving skills with the ability to prioritize work and manage multiple tasks.\n, • Advanced Excel, Word, Autocad, Project, Solidworks \n Physical Demands This role involves a mix of desk-based engineering tasks, on-site inspections, and interaction with manufacturing processes, requiring moderate physical activity in varied environments. \n • \nSitting/Stationary Positioning: Remains in a seated position frequently (about 40-50% of the time) for tasks such as designing, analyzing data, or using computer-aided design (CAD) software.\n, • \nHand and Finger Use/Dexterity: Uses hands to handle, control, or feel objects, tools, or controls occasionally to moderately (30-40% of the time), with manual dexterity and arm-hand steadiness for tasks like sketching, operating computers, or handling small tools; near vision required for detailed drawings or screens.\n, • \nStanding/Walking: Traverses moderate distances or remains in an upright stationary position frequently (30-40% of the time) to inspect production lines, collaborate with teams, or evaluate equipment on the shop floor.\n, • \nMoving Objects/Lifting/Carrying: Occasionally moves, transports, or positions objects weighing up to 20 pounds, such as tools, prototypes, or materials, during inspections or testing; requires minimal to moderate exertion for pushing or pulling equipment.\n, • \nBending/Twisting/Reaching: Positions self by bending, twisting, or stretching the body occasionally (20-30% of the time) to access equipment, inspect machinery, or reach workstations; moderate flexibility needed.\n, • \nRepetitive Motions: Performs repetitive actions occasionally (20-30% of the time), such as typing or adjusting equipment, requiring sustained focus but minimal stamina compared to manual labor roles.\n, • \nOther Environmental Factors: Frequently exposed to moderate noise levels (e.g., machinery, production environments) and occasionally to contaminants or hazardous equipment (20-30% of the time); may wear protective equipment (e.g., safety glasses, hard hats, or hearing protection) when on the shop floor (30-50% of the time); works in both office and manufacturing settings with constant interaction with others.\n\n In return, we offer \n • Culture of trust and accountability\n, • Lifelong learning and career growth\n, • Innovation powered by people\n, • Comprehensive compensation and benefits\n, • Health and well-being\n\n Benefits Summary: Annual Variable Compensation Bonus, Medical, Dental, Vision, 401k with Company Match, Paid Vacation, Paid Sick Time, Paid Floating Holidays, Tuition Reimbursement, Training and Development, Parental Leave, Disability Benefits, Life and AD&D Insurance. What you can expect from us: • Excellent working conditions and benefits., • Part of the Atlas Copco Group with a wide-reaching internal job market., • Work in a global, diverse and dynamic environment., • You can grow with us: we always look for internal candidates before checking the market and have training and development programs., • We have a friendly, family-like atmosphere - and that is not just a claim on the wall, it's a true fact., • You can be creative and promote your own ideas., • Every day brings new challenges and new things to learn. We're an Equal Opportunity Employer Edwards Company considers for employment and hires qualified candidates without regard to race, religion, color, sex, sexual orientation, genetic information, gender, gender identity, gender expression, age, national origin, ancestry, citizenship, protected veteran or disability status or any factor prohibited by law, and as such affirms in policy and practice to support and promote the concept of equal employment opportunity and affirmative action, in accordance with all applicable federal, state, provincial and municipal laws. No person shall be denied the equal protection of the laws of this state or any subdivision thereof. No person shall, because of race, color, ethnicity, national origin, age, disability, creed [or], religion, or sex, including sexual orientation, gender identity, gender expression, pregnancy, pregnancy outcomes, and reproductive healthcare and autonomy, be subjected to any discrimination in [his or her] their civil rights by any other person or by any firm, corporation, or institution, or by the state or any agency or subdivision of the state, pursuant to law. Edwards is a global leader of vacuum and abatement systems. We are proud to lead the industry, pushing the boundaries of science to deliver innovative products which are intrinsic to everyday life, working in partnership with our customers and continually setting new standards. With over 150 years of rich heritage, Atlas Copco Group is the partner of choice for tens of thousands of customers in critical applications around the world. Vacuum is required in diverse sectors, from the generation of power to the production of steel, to the challenging environments of space simulation and high energy physics research. At Edwards, we believe there is always a better way. Our employees are full of ideas. When looking to add a new team member, we are looking for someone that can appreciate what the Edwards Team has done and bring their new ideas and perspective to enhance where we can go. At Edwards you get to be part of something big; we work globally, but also get the opportunity make a difference locally in our own discipline. We work hard to attract, motivate, develop and retain the best talent from the diversity of people across the globe. Our vision to be First in Mind, First in Choice relies on this strategy. We are an Equal Opportunity Employer. For more information about Edwards visit our website: A division of Atlas Copco About Edwards Edwards is a leading developer and manufacturer of sophisticated vacuum products, exhaust management systems and related value-added services. Edwards solutions are integral to manufacturing processes for semiconductors, flat panel displays, LEDs and solar cells. They are also used within an increasingly diverse range of industrial processes including power, glass and other coating applications; steel and other metallurgy; pharmaceutical and chemical; and for scientific instruments in a wide range of R&D applications. Edwards has over 4,000 employees worldwide engaged in the design, manufacture and support of high technology vacuum and exhaust management equipment. Edwards has state-of-the-art manufacturing facilities in Europe, Asia and North America.

Location & Compensation \n • Buffalo, NY * Be part of an exciting journey as we prepare for production at our new facility in the Western New York Science & Technology Advanced Manufacturing Park (STAMP).\n, • Edwards Genesee location address: 6685 Crosby Rd Basom, NY 14013\n, • Assemble and test modules, cables and dry pumps in line with the daily production plan - focusing on quality and output targets.\n, • Maintain a safe and clean work area.\n, • Follows assembly and test instructions and procedures to meet output quality requirements.\n, • Leads the training of team members and collaborates to drive improvement and efficiency.\n, • Maintaining a good working relationship with department colleagues and the supporting departments.\n, • Perform quality work checks to ensure the assembly meets quality standards.\n, • Sets clear and achievable targets for teams daily activities, and ensures that the team understands its responsibilities\n, • Communicates customer needs to the team and esures team meets customer committed schedule of output\n, • Motivates the team, by giving advice and encouragement as needed\n Education Level: • 6S's; Material Requirements Planning (MRP) computerised applications; daily planning systems; supply chain; logistics. \n, • Has continuous improvement mindset.\n • Hand and Finger Use/Dexterity: Uses hands to handle, control, or feel objects, tools, or controls continually or almost continually (85% of the time), with manual and finger dexterity for grasping, manipulating, or assembling small objects; arm-hand steadiness for stability., • Standing/Walking: Remains in an upright stationary position continually or almost continually (41% of the time), with occasional traversing., • Moving Objects/Lifting/Carrying: Frequently moves, transports, or positions materials, involving exertion up to 10 pounds occasionally or negligible amounts frequently; trunk strength for repeated support., • Bending/Twisting/Reaching: Positions self by bending or twisting the body continually or almost continually (26% of the time), requiring flexibility., • Repetitive Motions: Performs repetitive actions continually or almost continually (48% of the time), often involving prolonged sitting or standing with repetitive arm/leg use. • \n\n, • Culture of trust and accountability\n, • Lifelong learning and career growth\n, • Innovation powered by people\n, • Comprehensive compensation and benefits\n Annual Variable Compensation Bonus, Medical, Dental, Vision, 401k with Company Match, Paid Vacation, Paid Sick Time, Paid Floating Holidays, Tuition Reimbursement, Training and Development, Parental Leave, Disability Benefits, Life and AD&D Insurance. What you can expect from us: • Excellent working conditionsand benefits., • Part of the Atlas Copco Group with a wide-reaching internal job market., • Work in a global, diverse and dynamic environment., • You can grow with us: we always look for internal candidates before checking the market and have training and development programs., • We have a friendly, family-like atmosphere - and that is not just a claim on the wall, it's a true fact., • You can be creative and promote your own ideas. No person shall be denied the equal protection of the laws of this state or any subdivision thereof. No person shall, because of race, color, ethnicity, national origin, age, disability, creed [or], religion, or sex, including sexual orientation, gender identity, gender expression, pregnancy, pregnancy outcomes, and reproductive healthcare and autonomy, be subjected to any discrimination in [his or her] their civil rights by any other person or by any firm, corporation, or institution, or by the state or any agency or subdivision of the state, pursuant to law. Edwards is a global leader of vacuum and abatement systems. We are proud to lead the industry, pushing the boundaries of science to deliver innovative products which are intrinsic to everyday life, working in partnership with our customers and continually setting new standards. With over 150 years of rich heritage, Atlas Copco Group is the partner of choice for tens of thousands of customers in critical applications around the world. Vacuum is required in diverse sectors, from the generation of power to the production of steel, to the challenging environments of space simulation and high energy physics research. At Edwards, we believe there is always a better way. Our employees are full of ideas. When looking to add a new team member, we are looking for someone that can appreciate what the Edwards Team has done and bring their new ideas and perspective to enhance where we can go. At Edwards you get to be part of something big; we work globally, but also get the opportunity make a difference locally in our own discipline. We work hard to attract, motivate, develop and retain the best talent from the diversity of people across the globe. Our vision to be First in Mind, First in Choice relies on this strategy. We are an Equal Opportunity Employer. For more information about Edwards visit our website: A division of Atlas Copco About Edwards Edwards is a leading developer and manufacturer of sophisticated vacuum products, exhaust management systems and related value-added services. Edwards solutions are integral to manufacturing processes for semiconductors, flat panel displays, LEDs and solar cells. They are also used within an increasingly diverse range of industrial processes including power, glass and other coating applications; steel and other metallurgy; pharmaceutical and chemical; and for scientific instruments in a wide range of R&D applications. Edwards has over 4,000 employees worldwide engaged in the design, manufacture and support of high technology vacuum and exhaust management equipment. Edwards has state-of-the-art manufacturing facilities in Europe, Asia and North America.

Location & Compensation \n • Buffalo, NY * Be part of an exciting journey as we prepare for production at our new facility in the Western New York Science & Technology Advanced Manufacturing Park (STAMP).\n, • Edwards Genesee location address: 6685 Crosby Rd Basom, NY 14013\n Essential Functions: \n • Aid in identifying, specifying, and installing new equipment within the facility.\n, • Provide basic manufacturing engineering support to the operational team as directed.\n, • Help maintain data system integrity by assisting with tasks such as change orders, non-conformance tracking, and system routing updates.\n, • Contribute to continuous improvement efforts that support goals in Safety, Quality, Delivery, Productivity, and Cost Performance.\n, • Assist in performing time studies for assembly processes to support proper routing and improve process flow.\n, • Help with the definition, setup, and preparation of job orders and manufacturing tooling as needed.\n, • Collaborate with colleagues, customers, and vendors to gather information, understand requirements, and assist in improving production techniques.\n, • Assist in creating and updating Standard Operating Procedures (SOPs) and technical specifications for manufacturing equipment.\n, • Help document designs, including creating drawings, specifications, and materials lists.\n, • Participate in training sessions on process, procedures, and documentation to help build and maintain workforce skills within assigned manufacturing areas.\n, • Maintain punctuality, work cooperatively in a team, and contribute positively to group efforts.\n, • Respectfully takes direction from [supervisor/ manager] and other duties as assigned.\n, • \nEducation level, • 2-3 years experience in manufacturing, machining, assembly or operations environment,\n, • Experience/knowledge of Kaizen, 6S, Lean Manufacturing.\n, • Strong analytical and problem-solving skills with the ability to prioritize work and manage multiple tasks.\n, • Advanced Excel, Word, Autocad, Project, Solidworks \n, • \nSitting/Stationary Positioning: Remains in a seated position frequently (about 40-50% of the time) for tasks such as designing, analyzing data, or using computer-aided design (CAD) software.\n, • \nHand and Finger Use/Dexterity: Uses hands to handle, control, or feel objects, tools, or controls occasionally to moderately (30-40% of the time), with manual dexterity and arm-hand steadiness for tasks like sketching, operating computers, or handling small tools; near vision required for detailed drawings or screens.\n, • \nStanding/Walking: Traverses moderate distances or remains in an upright stationary position frequently (30-40% of the time) to inspect production lines, collaborate with teams, or evaluate equipment on the shop floor.\n, • \nMoving Objects/Lifting/Carrying: Occasionally moves, transports, or positions objects weighing up to 20 pounds, such as tools, prototypes, or materials, during inspections or testing; requires minimal to moderate exertion for pushing or pulling equipment.\n, • \nBending/Twisting/Reaching: Positions self by bending, twisting, or stretching the body occasionally (20-30% of the time) to access equipment, inspect machinery, or reach workstations; moderate flexibility needed.\n, • \nRepetitive Motions: Performs repetitive actions occasionally (20-30% of the time), such as typing or adjusting equipment, requiring sustained focus but minimal stamina compared to manual labor roles.\n, • \nOther Environmental Factors: Frequently exposed to moderate noise levels (e.g., machinery, production environments) and occasionally to contaminants or hazardous equipment (20-30% of the time); may wear protective equipment (e.g., safety glasses, hard hats, or hearing protection) when on the shop floor (30-50% of the time); works in both office and manufacturing settings with constant interaction with others.\nIn return, we offer \n, • Culture of trust and accountability\n, • Lifelong learning and career growth\n, • Innovation powered by people\n, • Comprehensive compensation and benefits\n Annual Variable Compensation Bonus, Medical, Dental, Vision, 401k with Company Match, Paid Vacation, Paid Sick Time, Paid Floating Holidays, Tuition Reimbursement, Training and Development, Parental Leave, Disability Benefits, Life and AD&D Insurance. What you can expect from us: • Excellent working conditionsand benefits., • Part of the Atlas Copco Group with a wide-reaching internal job market., • Work in a global, diverse and dynamic environment., • You can grow with us: we always look for internal candidates before checking the market and have training and development programs., • We have a friendly, family-like atmosphere - and that is not just a claim on the wall, it's a true fact., • You can be creative and promote your own ideas. No person shall be denied the equal protection of the laws of this state or any subdivision thereof. No person shall, because of race, color, ethnicity, national origin, age, disability, creed [or], religion, or sex, including sexual orientation, gender identity, gender expression, pregnancy, pregnancy outcomes, and reproductive healthcare and autonomy, be subjected to any discrimination in [his or her] their civil rights by any other person or by any firm, corporation, or institution, or by the state or any agency or subdivision of the state, pursuant to law. Edwards is a global leader of vacuum and abatement systems. We are proud to lead the industry, pushing the boundaries of science to deliver innovative products which are intrinsic to everyday life, working in partnership with our customers and continually setting new standards. With over 150 years of rich heritage, Atlas Copco Group is the partner of choice for tens of thousands of customers in critical applications around the world. Vacuum is required in diverse sectors, from the generation of power to the production of steel, to the challenging environments of space simulation and high energy physics research. At Edwards, we believe there is always a better way. Our employees are full of ideas. When looking to add a new team member, we are looking for someone that can appreciate what the Edwards Team has done and bring their new ideas and perspective to enhance where we can go. At Edwards you get to be part of something big; we work globally, but also get the opportunity make a difference locally in our own discipline. We work hard to attract, motivate, develop and retain the best talent from the diversity of people across the globe. Our vision to be First in Mind, First in Choice relies on this strategy. We are an Equal Opportunity Employer. For more information about Edwards visit our website: A division of Atlas Copco About Edwards Edwards is a leading developer and manufacturer of sophisticated vacuum products, exhaust management systems and related value-added services. Edwards solutions are integral to manufacturing processes for semiconductors, flat panel displays, LEDs and solar cells. They are also used within an increasingly diverse range of industrial processes including power, glass and other coating applications; steel and other metallurgy; pharmaceutical and chemical; and for scientific instruments in a wide range of R&D applications. Edwards has over 4,000 employees worldwide engaged in the design, manufacture and support of high technology vacuum and exhaust management equipment. Edwards has state-of-the-art manufacturing facilities in Europe, Asia and North America.

Our solutions are a key part of most industries - electronics, medical research, renewable energy, food production, infrastructure and many more. Working with us means working with the latest technologies and groundbreaking, sustainable innovations. Join us on our journey for a better tomorrow. Location & Compensation \n • Buffalo, NY * Be part of an exciting journey as we prepare for production at our new facility in the Western New York Science & Technology Advanced Manufacturing Park (STAMP).\n, • Edwards Genesee location address: 6685 Crosby Rd Basom, NY 14013\n Your role The Manufacturing Engineer - Tooling is responsible for working closely with manufacturing planning and CNC shop personnel to identify, prepare, and maintain reliable tooling for use in production machining and automation. Essential Functions: \n • Aid in identifying, specifying, and testing new tooling to support CNC milling, turning, grinding, and deburring.\n, • Design, build, and test tooling and fixtures for process improvements.\n, • Fabricate, modify, and/or repair tooling, jigs, fixtures, and automation components.\n, • Provide manufacturing engineering support to the operational team as directed.\n, • Help maintain data system integrity by assisting with tasks such as change orders, non-conformance tracking, and system routing updates.\n, • Contribute to continuous improvement efforts that support goals in Safety, Quality, Delivery, Productivity, and Cost Performance.\n, • Assist in performing time studies for assembly processes to support proper routing and improve process flow.\n, • Help with the definition, setup, and preparation of job orders and manufacturing tooling as needed.\n, • Collaborate with colleagues, customers, and vendors to gather information, understand requirements, and assist in improving production techniques.\n, • Assist in creating and updating Standard Operating Procedures (SOPs) and technical specifications for manufacturing equipment.\n, • Help document designs, including creating drawings, specifications, and materials lists.\n, • Participate in training sessions on process, procedures, and documentation to help build and maintain workforce skills within assigned manufacturing areas.\n, • Maintain punctuality, work cooperatively in a team, and contribute positively to group efforts.\n, • Respectfully takes direction from [supervisor/ manager] and other duties as assigned.\n, • This position will report to the Manufacturing Engineering Manager.\n\n To succeed, you will need Ability to perform essential job duties with or without reasonable accommodation and without posing a direct threat to safety or health of employee or others. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties. Education level • Bachelor degree in engineering, mechanical or manufacturing preferred. Industry experience would be considered in the absence of a degree.\n Relevant Previous experience \n • 2-3 years experience in manufacturing, machining, assembly or operations environment,\n, • Experience with CNC equipment - Milling, turning, and or/grinding\n, • Experience with toolroom equipment - Manual lathe, CNC Knee-Mill, Surface Grinder\n\n Knowledge areas/Skills \n • CAD/CAM experience with Fusion 360, Inventor, Mastercam, Unigraphics, or other systems.\n, • Experience/knowledge of Kaizen, 6S, Lean Manufacturing.\n, • Strong analytical and problem-solving skills with the ability to prioritize work and manage multiple tasks.\n, • Strong English verbal and written communication skills; Korean language skills a benefit.\n Physical Demands This role involves a mix of desk-based engineering tasks, on-site inspections, and interaction with manufacturing processes, requiring moderate physical activity in varied environments. \n • \nSitting/Stationary Positioning: Remains in a seated position frequently (about 40-50% of the time) for tasks such as designing, analyzing data, or using computer-aided design (CAD) software.\n, • \nHand and Finger Use/Dexterity: Uses hands to handle, control, or feel objects, tools, or controls occasionally to moderately (30-40% of the time), with manual dexterity and arm-hand steadiness for tasks like sketching, operating computers, or handling small tools; near vision required for detailed drawings or screens.\n, • \nStanding/Walking: Traverses moderate distances or remains in an upright stationary position frequently (30-40% of the time) to inspect production lines, collaborate with teams, or evaluate equipment on the shop floor.\n, • \nMoving Objects/Lifting/Carrying: Occasionally moves, transports, or positions objects weighing up to 20 pounds, such as tools, prototypes, or materials, during inspections or testing; requires minimal to moderate exertion for pushing or pulling equipment.\n, • \nBending/Twisting/Reaching: Positions self by bending, twisting, or stretching the body occasionally (20-30% of the time) to access equipment, inspect machinery, or reach workstations; moderate flexibility needed.\n, • \nRepetitive Motions: Performs repetitive actions occasionally (20-30% of the time), such as typing or adjusting equipment, requiring sustained focus but minimal stamina compared to manual labor roles.\n, • \nOther Environmental Factors: Frequently exposed to moderate noise levels (e.g., machinery, production environments) and occasionally to contaminants or hazardous equipment (20-30% of the time); may wear protective equipment (e.g., safety glasses, hard hats, or hearing protection) when on the shop floor (30-50% of the time); works in both office and manufacturing settings with constant interaction with others.\n\n In return, we offer \n • Culture of trust and accountability\n, • Lifelong learning and career growth\n, • Innovation powered by people\n, • Comprehensive compensation and benefits\n, • Health and well-being\n\n Benefits Summary: Annual Variable Compensation Bonus, Medical, Dental, Vision, 401k with Company Match, Paid Vacation, Paid Sick Time, Paid Floating Holidays, Tuition Reimbursement, Training and Development, Parental Leave, Disability Benefits, Life and AD&D Insurance. What you can expect from us: • Excellent working conditions and benefits., • Part of the Atlas Copco Group with a wide-reaching internal job market., • Work in a global, diverse and dynamic environment., • You can grow with us: we always look for internal candidates before checking the market and have training and development programs., • We have a friendly, family-like atmosphere - and that is not just a claim on the wall, it's a true fact., • You can be creative and promote your own ideas., • Every day brings new challenges and new things to learn. We're an Equal Opportunity Employer Edwards Company considers for employment and hires qualified candidates without regard to race, religion, color, sex, sexual orientation, genetic information, gender, gender identity, gender expression, age, national origin, ancestry, citizenship, protected veteran or disability status or any factor prohibited by law, and as such affirms in policy and practice to support and promote the concept of equal employment opportunity and affirmative action, in accordance with all applicable federal, state, provincial and municipal laws. No person shall be denied the equal protection of the laws of this state or any subdivision thereof. No person shall, because of race, color, ethnicity, national origin, age, disability, creed [or], religion, or sex, including sexual orientation, gender identity, gender expression, pregnancy, pregnancy outcomes, and reproductive healthcare and autonomy, be subjected to any discrimination in [his or her] their civil rights by any other person or by any firm, corporation, or institution, or by the state or any agency or subdivision of the state, pursuant to law. Edwards is a global leader of vacuum and abatement systems. We are proud to lead the industry, pushing the boundaries of science to deliver innovative products which are intrinsic to everyday life, working in partnership with our customers and continually setting new standards. With over 150 years of rich heritage, Atlas Copco Group is the partner of choice for tens of thousands of customers in critical applications around the world. Vacuum is required in diverse sectors, from the generation of power to the production of steel, to the challenging environments of space simulation and high energy physics research. At Edwards, we believe there is always a better way. Our employees are full of ideas. When looking to add a new team member, we are looking for someone that can appreciate what the Edwards Team has done and bring their new ideas and perspective to enhance where we can go. At Edwards you get to be part of something big; we work globally, but also get the opportunity make a difference locally in our own discipline. We work hard to attract, motivate, develop and retain the best talent from the diversity of people across the globe. Our vision to be First in Mind, First in Choice relies on this strategy. We are an Equal Opportunity Employer. For more information about Edwards visit our website: A division of Atlas Copco Diverse by nature and inclusive by choice Bright ideas come from all of us. The more unique perspectives we embrace, the more innovative we are. Together we build a culture where difference is valued and we share a deep sense of purpose and belonging.

Location & Compensation \n • Buffalo, NY * Be part of an exciting journey as we prepare for production at our new facility in the Western New York Science & Technology Advanced Manufacturing Park (STAMP).\n, • Edwards Genesee location address: 6685 Crosby Rd Basom, NY 14013\n, • Work closely with Korean engineers and equipment vendors to understand current processes at existing pump facilities in Korea.\n, • Implement processes into new plant in Genesee, NY including qualification, installation, and validation of new equipment and associated documentation.\n, • Assist with the specification, location, acquisition, and installation of new equipment into the facility.\n, • Provide manufacturing engineering support to the operational team where needed.\n, • Implement changes to data systems and maintain data system integrity; charges include, but are not limited to change orders, non-conformance tracking, system routings\n, • Drive continuous improvement initiatives in support of departmental, site and corporate objectives for Safety, Quality, Delivery, Productivity, and Cost Performance\n, • Performs time studies for the assembly processes to create the correct routings and to optimize the balancing of the assembly process.\n, • Accounts for the definition, setup, preparation and optimization of Job orders and manufacturing tooling.\n, • Interface with colleagues, customers, vendors and others to understand requirements, assess feasibility of new/existing products, and improve production techniques\n, • Creates and maintains of SOP (Standard Operating Procedures), technical specifications for manufacturing equipment, test specs.\n, • Document designs with drawings, specification and materials list\n, • Performs active training process, procedures, documentation, and traceability to create and sustain the workforce competences within the allocated manufacturing cells.\n, • Maintains punctual, regular and predictable attendance; works collaboratively in a team environment with a spirit of cooperation.\n, • Respectfully takes direction from [supervisor/ manager] and other duties as assigned.\n, • Experience/knowledge of Kaizen, 6S, Lean Manufacturing.\n, • Strong analytical and problem-solving skills with the ability to prioritize work and manage multiple tasks.\n, • Advanced Excel, Word, Autocad, Project, Solidworks\n, • Strong English verbal and written communication skills; Korean language skills a benefit.\n, • \nSitting/Stationary Positioning: Remains in a seated position frequently (about 40-50% of the time) for tasks such as designing, analyzing data, or using computer-aided design (CAD) software.\n, • \nHand and Finger Use/Dexterity: Uses hands to handle, control, or feel objects, tools, or controls occasionally to moderately (30-40% of the time), with manual dexterity and arm-hand steadiness for tasks like sketching, operating computers, or handling small tools; near vision required for detailed drawings or screens.\n, • \nStanding/Walking: Traverses moderate distances or remains in an upright stationary position frequently (30-40% of the time) to inspect production lines, collaborate with teams, or evaluate equipment on the shop floor.\n, • \nMoving Objects/Lifting/Carrying: Occasionally moves, transports, or positions objects weighing up to 20 pounds, such as tools, prototypes, or materials, during inspections or testing; requires minimal to moderate exertion for pushing or pulling equipment.\n, • \nBending/Twisting/Reaching: Positions self by bending, twisting, or stretching the body occasionally (20-30% of the time) to access equipment, inspect machinery, or reach workstations; moderate flexibility needed.\n, • \nRepetitive Motions: Performs repetitive actions occasionally (20-30% of the time), such as typing or adjusting equipment, requiring sustained focus but minimal stamina compared to manual labor roles.\n, • \nOther Environmental Factors: Frequently exposed to moderate noise levels (e.g., machinery, production environments) and occasionally to contaminants or hazardous equipment (20-30% of the time); may wear protective equipment (e.g., safety glasses, hard hats, or hearing protection) when on the shop floor (30-50% of the time); works in both office and manufacturing settings with constant interaction with others.\nIn return, we offer \n, • Culture of trust and accountability\n, • Lifelong learning and career growth\n, • Innovation powered by people\n, • Comprehensive compensation and benefits\n Annual Variable Compensation Bonus, Medical, Dental, Vision, 401k with Company Match, Paid Vacation, Paid Sick Time, Paid Floating Holidays, Tuition Reimbursement, Training and Development, Parental Leave, Disability Benefits, Life and AD&D Insurance. What you can expect from us: • Excellent working conditionsand benefits., • Part of the Atlas Copco Group with a wide-reaching internal job market., • Work in a global, diverse and dynamic environment., • You can grow with us: we always look for internal candidates before checking the market and have training and development programs., • We have a friendly, family-like atmosphere - and that is not just a claim on the wall, it's a true fact., • You can be creative and promote your own ideas. No person shall be denied the equal protection of the laws of this state or any subdivision thereof. No person shall, because of race, color, ethnicity, national origin, age, disability, creed [or], religion, or sex, including sexual orientation, gender identity, gender expression, pregnancy, pregnancy outcomes, and reproductive healthcare and autonomy, be subjected to any discrimination in [his or her] their civil rights by any other person or by any firm, corporation, or institution, or by the state or any agency or subdivision of the state, pursuant to law. Edwards is a global leader of vacuum and abatement systems. We are proud to lead the industry, pushing the boundaries of science to deliver innovative products which are intrinsic to everyday life, working in partnership with our customers and continually setting new standards. With over 150 years of rich heritage, Atlas Copco Group is the partner of choice for tens of thousands of customers in critical applications around the world. Vacuum is required in diverse sectors, from the generation of power to the production of steel, to the challenging environments of space simulation and high energy physics research. At Edwards, we believe there is always a better way. Our employees are full of ideas. When looking to add a new team member, we are looking for someone that can appreciate what the Edwards Team has done and bring their new ideas and perspective to enhance where we can go. At Edwards you get to be part of something big; we work globally, but also get the opportunity make a difference locally in our own discipline. We work hard to attract, motivate, develop and retain the best talent from the diversity of people across the globe. Our vision to be First in Mind, First in Choice relies on this strategy. We are an Equal Opportunity Employer. For more information about Edwards visit our website: A division of Atlas Copco About Edwards Edwards is a leading developer and manufacturer of sophisticated vacuum products, exhaust management systems and related value-added services. Edwards solutions are integral to manufacturing processes for semiconductors, flat panel displays, LEDs and solar cells. They are also used within an increasingly diverse range of industrial processes including power, glass and other coating applications; steel and other metallurgy; pharmaceutical and chemical; and for scientific instruments in a wide range of R&D applications. Edwards has over 4,000 employees worldwide engaged in the design, manufacture and support of high technology vacuum and exhaust management equipment. Edwards has state-of-the-art manufacturing facilities in Europe, Asia and North America.

Seneca Technologiesis part of the Seneca Nation Group (SNG) portfolio of companies. SNGis Seneca Holdings' federal government contracting business that meets mission-critical needs of federal civilian, defense, and intelligence community customers. Our portfolio comprises multiple subsidiaries that participate in the Small Business Administration 8(a) program. To learn more about SNG, visit___ and follow us on___. Our team of talented individuals is what makes us successful. To support our team, we provide a balanced mix of benefits and programs.Your total rewards package includes competitive pay, benefits, and perks, flexible work-life balance, professional development opportunities, and performance and recognition programs. We offer a comprehensive benefits package that includes medical, dental, vision, life, and disability, voluntary benefit programs (critical illness, hospital, and accident), health savings and flexible spending accounts, and retirement 401K plan. One of our fundamental principles is to offer competitive health and welfare benefits to our team members, providing coverage and care for you and your family. Full-time employees working at least 30 hours a week on a regular basis are eligible to participate in our benefits and paid leave programs. We pride ourselves on our collaborative work environment and culture, which embraces our mission of providing financial and non-financial benefits back to the members of the Seneca Nation. Seneca Technologies is seeking an experienced Software Developer to support a program within a federal financial environment. This role focuses on developing, enhancing, and maintaining the Artiva software platform to meet evolving client requirements. The successful candidate will work closely with both technical teams and end users to design and implement solutions that improve workflow performance, system functionality, and overall operational efficiency. A key aspect of this position is collaborating with clients to optimize how Artiva is implemented and utilized, ensuring the platform effectively supports their business processes. Responsibilities include, but are not limited to: • Design, develop, and enhance software solutions within the Artiva platform based on documented business and technical requirements., • Translate functional requirements into scalable and maintainable technical solutions, applying sound development practices and logical problem-solving techniques., • Create detailed solution design documentation for Artiva implementations to support customer understanding, system maintainability, and efficient deployment., • Collaborate directly with clients and stakeholders to optimize Artiva workflows and configurations, identifying opportunities to streamline processes and improve operational efficiency., • Participate in system implementation activities including configuration, integration, and deployment support., • Develop and execute acceptance testing plans, troubleshoot defects, and implement corrective solutions., • Provide technical guidance and support to business users to ensure effective use of Artiva capabilities and features., • Assist in gathering, refining, and documenting client requirements to support new functionality and system enhancements., • Bachelor's degree in computer science, Information Systems, or a related technical field., • 5-7 years of hands-on software development experience., • U.S. Citizenship with the ability to obtain and maintain required government security clearances., • Demonstrated experience developing or configuring solutions within the Artiva platform., • Advanced experience with Artiva workflow design, administration, and scripting language., • Strong experience working with Cache ObjectScript and Cache database environments., • Experience creating and consuming REST and SOAP APIs in Cache., • Experience customizing Artiva Webstation interfaces and functionality., • Strong SQL skills, including query optimization and database design., • Experience with Cache database management and configuration., • Familiarity with Atlassian tools such as Jira, Confluence, and Bitbucket., • Experience with Git version control systems., • Experience with Shell scripting., • Working knowledge of web technologies (HTML, CSS, JavaScript)., • Experience working in Agile development environments., • Strong written and verbal communication skills., • Ability to work independently and manage priorities in a fast-paced environment., • Ability to effectively articulate technical requirements and collaborate across technical and business teams. Equal Opportunity Statement: Seneca Holdings provides equal employment opportunities to all employees and applicants without regard to race, color, religion, sex/gender, sexual orientation, national origin, age, disability, marital status, genetic information and/or predisposing genetic characteristics, victim of domestic violence status, veteran status, or other protected class status. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation and training. The Company also prohibits retaliation against any employee who exercises his or her rights under applicable anti-discrimination laws. Notwithstanding the foregoing, the Company does give hiring preference to Seneca or Native individuals. Veterans with expertise in these areas are highly encouraged to apply.

CRM Field Clinical Representative - Buffalo NY/Erie, PA Work mode: Field Based Territory: United States Additional Location(s): US-PA-Erie Diversity - Innovation - Caring - Global Collaboration - Winning Spirit - High Performance At Boston Scientific, we'll give you the opportunity to harness all that's within you by working in teams of diverse and high-performing employees, tackling some of the most important health industry challenges. With access to the latest tools, information and training, we'll help you in advancing your skills and career. About the role: At Boston Scientific, we're advancing the future of cardiac care. As part of our Cardiac Rhythm Management (CRM) division, you'll contribute to life-saving innovations that treat irregular heart rhythms, heart failure, and help prevent sudden cardiac arrest. Our mission is to improve patient outcomes and quality of life through less-invasive, cutting-edge therapies—including implantable cardioverter defibrillators (ICDs), insertable cardiac monitorization systems (ICMs), and cardiac resynchronization therapy (CRTs). With nearly two decades of innovation and clinical leadership, Boston Scientific is globally recognized as a trusted leader in Cardiac Rhythm Management (CRM). Join a team committed to making a meaningful difference in the lives of patients around the world. In this dynamic and patient-centered role, you will be a key clinical and commercial contributor—supporting our technologies through hands-on education, sales support, and expert clinical guidance. You'll cover a defined territory, collaborating closely with hospitals and healthcare providers to ensure best-in-class outcomes and to drive the adoption of our innovative CRM solutions. Your responsibilities will include: • Serving as the primary clinical expert during device implants, patient follow-ups, programming, and troubleshooting, • Delivering impactful education and training to healthcare professionals on product use and clinical benefits, • Attending procedures in hospital labs and operating rooms to support optimal patient outcomes, • Building strong relationships with physicians, nurses, and key hospital staff to foster trust and drive engagement, • Resolving customer needs efficiently, collaborating cross-functionally to ensure patient and clinician satisfaction, • Managing product inventory according to company guidelines, ensuring readiness and availability Preferred qualifications: Candidates should have proven experience in an Electrophysiology (EP) lab, cardiac device clinic, or Cardiac Catheterization (Cath) lab. A degree in biomedical engineering, science, mathematics, business, or nursing is preferred. A solid background in medical device sales, clinical education, or clinical research is required. Individuals must demonstrate strong initiative and accountability, with a consistent track record of achieving objectives independently and in team-based environments. Exceptional communication skills are essential, with the ability to clearly articulate complex therapies and technologies to diverse clinical audiences. A deep commitment to innovation, patient care, and cross-functional collaboration in a dynamic, fast-paced environment is expected. The anticipated annualized base amount or range for this full time position will be $70,000 to $90,000, plus variable compensation governed by the Sales Incentive Compensation Plan (which includes certain annual non-discretionary incentives based on predetermined objectives) as well as the value of core and optional benefits offered at BSC, which can be reviewed at . Actual compensation will be commensurate with demonstrable level of experience and training, pertinent education including licensure and certifications, and other relevant business or organizational needs. Boston Scientific transforms lives through innovative medical technologies that improve the health of patients around the world. As employees of the Company, you will be expected to meet the ongoing requirements for your roles, including any new requirements, should the Company's policies or protocols change with regard to COVID-19 vaccination.

It's fun to work in a company where people truly BELIEVE in what they're doing! Job Description: Ingram Micro is a leading technology company for the global information technology ecosystem. With the ability to reach nearly 90% of the global population, we play a vital role in the worldwide IT sales channel, bringing products and services from technology manufacturers and cloud providers to business-to-business technology experts. Our market reach, diverse solutions and services portfolio, and digital platform Ingram Micro Xvantage™ set us apart. Learn more at Ingram Micro has earned Great Place to Work Certification™ for 2025-2026 in Canada! This prestigious recognition reflects our commitment to our people and our culture. Come join our team where you'll make technology happen in surprising ways. Let's shape tomorrow - it'll be a fun journey! This position is a hybrid role based in our Mississauga office with the opportunity to work 2 days remotely per week Role Summary: We are looking for a Senior AWS Support Engineer to join our global support team. This role is ideal for someone with a strong background in technical support or service desk environments who is ready to take on a more strategic and hands-on role in managing and resolving complex AWS-related issues. You will be the go-to expert for escalated support cases, ensuring that customer issues are progressing efficiently and effectively. You'll also play a key role in improving our support processes to reduce recurring issues and enhance customer satisfaction. Responsibilities: Working in close collaboration with the Global Support Manager and wider in-country AWS teams, the core responsibilities of the role include, but not limited to, the following: • Monitor and Manage Support Cases: Oversee incoming AWS-related support issues from frontline agents, ensuring they are progressing efficiently and escalated as needed., • Mentorship: Guide and support frontline support engineers, sharing your expertise and helping them grow., • Reduce Escalations to AWS (L3): Act as the senior technical authority to resolve complex issues internally, minimizing the need to escalate to AWS support., • Hands-On Troubleshooting: Step in to troubleshoot and resolve advanced technical issues across AWS services (e.g., EC2, S3, RDS, VPC, Lambda). Ensuring the customer experience is top of mind., • Process Improvement: Design and implement support workflows and preventive measures to reduce recurring issues and improve first-time resolution rates., • Enhance Team Knowledge: Strengthen the capabilities of the support team through training sessions, documentation, and active knowledge sharing, • Documentation & Best Practices: Create and maintain technical documentation, SOPs, and knowledge base articles., • On-Call Support: Participate in a rotating on-call schedule for critical issues., • Skill Development: Stay up to date with the latest AWS technologies and best practices and share knowledge with the team. What you bring to the role:, • Bachelor's degree or equivalent within Information Technology, Computer Science, or related discipline., • 8+ years in technical support, service-desk or customer-facing IT roles., • 4+ years of hands-on experience supporting AWS., • Experience with cloud computing and infrastructure., • Strong hands-on troubleshooting skills but not limited to the following: HTTP/HTTPS, DNS, TCP/IP, Windows & Linux OS., • Ability to diagnose, isolate and resolve network connectivity/performance issues., • Strong knowledge of AWS services but not limited to Amazon EC2, Amazon S3, AWS IAM, Amazon VPC, Amazon CloudWatch, Amazon RDS, AWS Lambda, AWS CloudFormation, Elastic Load Balancing (ELB), and Amazon Route 53., • Expertise in isolating and resolving issues related to AWS Direct Connect, AWS Site-to-Site VPN, route tables, VPC subnet and NACL/Security Group configurations., • Identifying and understanding performance issues for webservers using AWS CloudWatch metrics., • Ability to understand and provide recommendations leveraging AWS Documentation., • Excellent communication and interpersonal skills., • Strong problem-solving skills with a focus on uncovering root causes., • Strong analytical and organizational skills., • Customer-focused mindset with the ability to handle escalations effectively., • One or more valid AWS certifications such as AWS Certified Solutions Architect, AWS Certified SysOps Administrator, or AWS Certified DevOps Engineer are required., • *This is not a complete listing of the job duties. It's a representation of the things you will be doing, and you may not perform all of these duties. The typical base pay range for this role across Canada is $110,000 - $130,000 CAD per year. The ranges above reflect the potential annual starting base pay across all of Canada for all roles. Individual base pay within each range depends on various factors, including work location, complexity and responsibility of role, job duties/requirements, and relevant experience and skills. This role is a new role and will not use AI for screening applicants. At Ingram Micro, certain roles are eligible for additional rewards, including merit increases, annual bonuses, or sales incentives. These awards are allocated based on position level and individual performance. Canadian associates have access to flexible Healthcare, Dental, Vision, well-being benefits and perks, critical illness, disability coverage, mental health support, paid time off, RRSP Matching and much more! Equal Opportunity Statement As a diverse and inclusive organization, we encourage individual achievement and recognize the strength of a diverse workforce. Ingram Micro Canada is proud to be an equal-opportunity employer. We consider qualified applicants without regard to race, color, religion, gender, national origin, age, disability, veteran status, marital status, pregnancy, sex, gender expression or identity, sexual orientation, citizenship, or any other legally protected class. Accommodations for job applicants are available on request, please contact us by sending an email to . This email box is designed to assist with accommodations through the hiring process. Emails sent for non-accommodation-related inquiries, such as following up on an application, will not receive a response. In your email, please provide contact details, and preferred contact method and describe the accommodation so we can work with you to assist. Ingram Micro's Commitment to ESG (Environment, Social & Governance) Ingram Micro is a values-driven organization and our commitment to ESG performance is a statement about who we are and our desire to make a difference each day through the way we do business. Through our IngramMicroESG program, we establish policies, programs, and practices to achieve continuous improvement on the Environmental, Social and Governance areas that are most significant to our stakeholders. Learn more about our ESG initiatives and read our ESG reports here - Ingram Micro ESG. #LI-Hybrid

Possess a bachelor's degree in Clinical or Medical Laboratory Science, or an accredited allied health degree along with preparation for ASCP/AMT certification. Conduct a variety of clinical laboratory tests, covering areas such as hematology, chemistry, immunology, and more, following established pr

Applications to be submitted by May 04, 2026 Compensation Grade: P24 Compensation Details: Minimum: $95,130.00 - Maximum: $95,130.00 Annually Positions with a designated work location in New York City, Nassau, Rockland, Suffolk, or Westchester Counties will receive a $4,000 annual downstate adjustment (pro-rated for part-time positions). Department (OPH) Office of Public Health Job Description: Responsibilities The Public Health Program Nurse (PHPN) will work to improve the health of Western New York communities by providing training, technical assistance, resources, guidance, and clinical guidance on community health services to local health departments, community-based organizations, and other community partners within the 17 counties of Western New York. The PHPN will monitor public health data, contribute to the identification of public health issues, contribute to strategies to promote health equity programming, and evaluate activities implemented. The PHPN will facilitate enhanced collaboration and coordination between Community Health programs, providers, and other key stakeholders to improve health outcomes for infants, children, adolescents, and adults. The PHPN will work to improve the health of communities by providing training, technical assistance, resources, guidance, and clinical guidance to local health departments, community-based organizations, and other community partners regarding health education and health promotion activities including implementation of the Prevention Agenda and implementation of the Chronic Disease Action Plan. The PHPN may participate in public health emergency response activities as needed. Minimum Qualifications A Bachelor's of Science degree in Nursing AND a license and current registration as a professional registered nurse in NYS AND four years of experience planning, evaluating, or administering health services or teaching in a health related program; OR an Associate's degree in Nursing AND a license and current registration as a professional registered nurse in NYS AND six years of experience planning, evaluating, or administering health services or teaching in a health related program. A Master's degree in nursing may substitute for one year of experience planning, evaluating, or administering health services or teaching in a health related program. Preferred Qualification Familiarity with family health and/or chronic disease activities including maternal, child, and reproductive public health services; and prevention and control activities related to cancer, diabetes, cardiovascular disease, and/or asthma. Experience in oversight and evaluation of public health and preventive health programs, as well as promoting public health messages. Experience supervising staff. Experience managing multiple tasks, developing, and delivering educational materials, coordinating training activities, and contributing on policy development. Excellent organizational, interpersonal, and written and oral communication skills. Proficiency with computer-based software packages such as Microsoft Office, Outlook, etc. Conditions of Employment Grant funded position. Compliance with funding requirements such as time and effort reporting, grant deliverables, and contract deliverables, is required. Valid and unrestricted authorization to work in the U.S. is required. Visa sponsorship is not available for this position. Travel up to 25% of the time will be required. The selected candidate must reside within a reasonable commuting distance of the official work location specified in the job posting and must also be located in or willing to relocate to one of the following states: New York, New Jersey, Connecticut, Vermont, or Massachusetts, prior to hire. This position is eligible for a hybrid work schedule, with a combination of onsite and remote work. HRI participates in the E-Verify Program. Affirmative Action/Equal Opportunity Employer/Qualified Individuals with Disabilities/Qualified Protected Veterans About Health Research, Inc. Join us in our mission to make a difference in public health and advance scientific research! At Health Research, Inc. (HRI), your work will contribute to meaningful change and innovation in the communities we serve! At HRI, we are on a mission to transform the health and well-being of the people of New York State through innovative partnerships and cutting-edge public health initiatives. As a dynamic non-profit organization, HRI plays a crucial role in advancing the strategic goals of the New York State Department of Health (DOH), Roswell Park Comprehensive Cancer Center (RPCCC), and other health-related entities. HRI offers a robust, comprehensive benefits package to eligible employees, including: • Health, dental and vision insurance - Several comprehensive health insurance plans to choose from;, • Flexible benefit accounts - Medical, dependent care, adoption assistance, parking and transit;, • Generous paid time off - Paid federal and state holidays, paid sick, vacation and personal leave;, • Tuition support - Assistance is available for individuals pursuing educational or training opportunities;, • Retirement Benefits - HRI is a participating employer in the New York State and Local Retirement System and offers optional enrollment in the New York State Deferred Compensation Plan. HRI provides a postretirement Health Benefits Plan for qualified retirees to use towards health insurance premiums and eligible medical expenses;, • Employee Assistance Program - Provides educational and wellness programs, training, and 24/7 confidential services to assist employees, both personally and professionally;, • And so much more! Work Location Expectations At HRI, the nature of hybrid and onsite work varies by position. Some roles require full onsite presence, while others allow a hybrid schedule. Managers determine the specific telecommuting expectations for each role based on operational needs and job responsibilities. If designated as hybrid, you will divide your time between working remotely and reporting onsite. Regardless of telecommuting status, all HRI employees must live within a reasonable commuting distance of their official work location and must reside in one of the following states: New York, New Jersey, Connecticut, Massachusetts, or Vermont.

Medical Specialist (Sales Representative), Gastroenterology Geography: Buffalo, NY The Medical Specialist (Sales Representative), Gastroenterology (MS) will report to the District Manager, Gastroenterology, and be responsible for engaging Gastroenterologists and other key customers within an assigned geographical universe, presenting clinically focused selling messages to create and grow revenue, and consistently delivering product goals. The MS will demonstrate strong and consistent sales performance that exceeds forecast and expectations related to product goals. The MS will accomplish this in a compliant manner with a high degree of integrity strictly following all Regeneron policies, and in compliance with all policies and procedures governing the promotion of pharmaceutical and biologic products in the US. A Typical Day May Include the Following: The MS is responsible for developing strategy and executing tactics within key accounts in the Gastroenterology therapeutic area to generate product utilization. The MS will develop strong working relationships with experts and all Gastroenterologists in assigned geography as well as nurses, office staff and other important health care personnel and key patient advocacy support groups as directed. A core responsibility of the MS will be to collaborate with their district colleagues, alliance counterparts, as well as other field-based and home office personnel teams to proactively address customer needs, market dynamics and trends and develop strategies which support brand and corporate objectives within their assigned geography. The MS will participate and help lead initiatives to support sales success as assigned (e.g. participate in industry related congresses, local and regional meetings and medical conferences). This Role May Be For You If: • Demonstrate advanced clinically-based selling skills, • Proven success and positive track record of consistent sales performance in complex markets with diverse customer segments operating with a high degree of integrity within compliance guidelines, • Proven success navigating and demonstrating positive impact with large groups, institutional settings, and Ambulatory Surgery Centers, • Results oriented with a proven track record of success with product launches

Technical Consultant - Patient Monitoring (Field: Buffalo/Rochester/Syracuse, NY) page is loaded## Technical Consultant - Patient Monitoring (Field: Buffalo/Rochester/Syracuse, NY)locations: Rochester, New York, United States: Buffalo, New York, United States: Syracuse, New York, United Statestime type: Full timeposted on: Posted Yesterdayjob requisition id: 570557### Job TitleTechnical Consultant - Patient Monitoring (Field: Buffalo/Rochester/Syracuse, NY)### Job DescriptionAllow your passion for improving lives to shine in this role where you’ll be responsible for customer relationship management through the effective application of technical knowledge to install/implement, service, test, and troubleshoot complex solutions on IT networks to ensure a high quality of service in delivering real time patient data requirements.Your role:* Provide technical recommendations that best suit the environment based on customer requirements, support the transition from a break fix operating model to a customer solutions focused operating model. Drive continuous improvement of implementation methodology and service offerings; actively support to implement service strategies to achieve customer loyalty.* Actively participate as a member of the regional work team, collaborating with a diverse team of internal and external resources to include clinical, sales, and service partners. Coordinate project resources and tasks, enabling team members to focus on customer deliverables.* Perform all administrative duties within established Philips, State, and Federal regulatory requirements and timeframes including timesheets, service work orders, expense reports, Field Change Orders (FCO), preventative maintenance (PM), installation documents, site and service documentation, and other related paperwork. Adhere to established training, quality, and safety requirements.* Install complex, multi-phased systems comprised of IT infrastructure and patient monitoring equipment in both clinical and non-clinical environments (build, deploy, and/or integrate solutions). Provide a technical review of system configuration to ensure viability of system performance during implementations; diagnose and resolve electronic, networking, and mechanical problems.* Approximately 70% travel across the specified geography is required. The average driving time is 1-4 hours daily. Occasional overnight stays and travel by air and/or train may be required.You're the right fit if:* You’ve acquired 1+ year of professional working experience in the IT technologies or electronics industry, preferably in a field or hospital-based service environment. Experience with patient monitoring, telemetry units, ventilators, and defibrillators highly preferred.* Your skills include network configuration and/or troubleshooting experience, and you have obtained the Cisco Certified Network Associate (CCNA) certification (or required to obtain within 6 months from beginning of employment).* You have a bachelor’s degree in computer science, electronics, biomedical, or other related disciplines or equivalent combination of education and above listed experience.* You must be able to successfully perform the following minimum Physical, Cognitive and Environmental job requirements with or without accommodation for this position.* You must be able to: • Work in an office/home office and/or remote setting, as well as in a hospital/healthcare environment; adhere to requirements., • Work flexible hours (based on business needs to include overtime, weekends, and on-call rotations). The actual base pay offered may vary depending on multiple factors including, job-related knowledge/skills, experience, business needs, geographical location, and internal equity.In addition, other compensation, such as an annual incentive plan, sales commission or long-term incentives may be offered. Employees are eligible to participate in our comprehensive Philips Total Rewards benefits program, which includes a generous PTO, 401k (up to 7% match), HSA (with company contribution), stock purchase plan, education reimbursement and much more. Details about our benefits can be found . At Philips, it is not typical for an individual to be hired at or near the top end of the range for their role and compensation decisions are dependent upon the facts and circumstances of each case. Additional InformationUS work authorization is a precondition of employment. The company will not consider candidates who require sponsorship for a work-authorized visa, now or in the future.Company relocation benefits be provided for this position. For this position, you must reside in within commuting distance to Buffalo, Rochester, and Syracuse, NY.This requisition is expected to stay active for 45 days but may close earlier if a successful candidate is selected or business necessity dictates. Interested candidates are encouraged to apply as soon as possible to ensure consideration.*Philips is an Equal Employment and Opportunity Employer including Disability/Vets and maintains a drug-free workplace.*At Philips, we believe that every human matters. As a global health-tech leader, we focus on improving people’s health and wellbeing through meaningful innovation. The people who work here share our passion and are motivated to bring this purpose to life.For more than 130 years, we have been creating technologies and innovations that improve people's lives and support healthcare practitioners. Headquartered in the Netherlands and operating in more than 100 countries globally, we focus our advanced technology and deep clinical and consumer insights on Precision Diagnosis, Image Guided Therapy, Enterprise Informatics, Monitoring/ Connected Care, Sleep & Respiratory Care and Personal Health.Together, we deliver better care for more people because we believe that every human matters. That's why we're taking steps to create an environment where we acknowledge and embrace our differences and uniqueness and listen to and value each other's views. When people feel cared for and listened to, they bring their best qualities to work, leading to better collaboration, communication, innovation and success.*It is the policy of Philips to provide equal employment and advancement opportunities to all qualified employees and applicants for employment without regard to race, color, religion, sex, pregnancy/childbirth or related medical conditions, age, ethnic or national origin, sexual orientation, gender identity or expression, physical or mental disability, genetic information, citizenship status, veteran or military status, marital or domestic partner status or any other characteristic protected by law. As an equal opportunity employer, Philips is committed to fostering a culture where all are treated with respect and professionalism.**To #J-18808-Ljbffr

Bachelor's degree in Clinical or Medical Laboratory Science, or an equivalent allied health degree with the expectation of ASCP/AMT certification preparation. ASCP or AMT Board of Certification in Clinical Laboratory Science (CLS) to be obtained within one year of hiring. Comprehensive market-compet

Bachelor's degree in Clinical or Medical Laboratory Science or a relevant allied health field, with ASCP/AMT certification preparation. Conduct routine and specialized clinical laboratory tests-including chemistry, hematology, immunology, and more-adhering strictly to established protocols. Maintain

Bachelor's degree in Clinical or Medical Laboratory Science or an equivalent allied health degree, along with preparation for ASCP or AMT certification. Conduct both routine and advanced clinical laboratory tests across various disciplines including chemistry, hematology, and immunology, adhering to

Job Description Job Title Director of Environmental Health & Safety (EHS) Location Buffalo, NY or Phoenix, AZ Department Operations Employment Type Full-Time | Exempt Company Overview GTI designs, engineers, and manufactures complex modular systems supporting energy storage, power generation, modular data center infrastructure, defense, and industrial markets. Operating in a high-mix, engineered-to-order manufacturing environment, GTI delivers steel enclosures, integrated platforms, and mission-critical modular systems. Maintaining safe operations, environmental compliance, and disciplined quality systems is critical to GTI’s manufacturing performance and ISO 9001-certified operating environment. Position Overview GTI is seeking a Director of Environmental Health & Safety (EHS) to lead enterprise safety, environmental compliance, and risk management across manufacturing operations. This role is responsible for developing and enforcing EHS programs that protect employees, ensure regulatory compliance, and support operational excellence in fabrication-driven manufacturing environments. The Director of EHS partners closely with Operations, Engineering, Quality, and Supply Chain leadership to embed safety into daily production activities while maintaining compliance with OSHA regulations, environmental standards, and ISO-aligned quality systems. Key Responsibilities • Develop and lead GTI’s Environmental Health & Safety strategy across manufacturing facilities, • Establish and enforce safety programs aligned with OSHA, EPA, and applicable state and federal regulations, • Build and maintain safety management systems that support ISO 9001 operational discipline, • Lead site-level safety initiatives including hazard identification, risk mitigation, and safety audits, • Oversee incident investigations, root cause analysis, and corrective action implementation, • Develop leading and lagging safety KPIs including TRIR, DART, near-miss reporting, and incident frequency rates, • Implement safety training programs covering equipment operation, lockout/tagout, confined space, welding safety, and industrial hazards, • Partner with manufacturing leadership to integrate safety into fabrication, assembly, welding, and production workflows, • Ensure environmental compliance including waste handling, hazardous material storage, emissions reporting, and regulatory documentation, • Manage site emergency response planning and incident preparedness, • Conduct internal audits and inspections to verify compliance with safety and environmental standards, • Develop and maintain safety documentation, policies, and regulatory reporting requirements, • Lead continuous improvement initiatives to reduce workplace hazards and improve operational safety culture, • Collaborate with HR and Operations to support worker safety training, onboarding safety orientation, and compliance programs, • Provide executive reporting on safety performance, compliance risks, and improvement initiatives Required Qualifications • Bachelor’s degree in Environmental Health & Safety, Occupational Safety, Industrial Engineering, Environmental Science, or related field, • 10+ years of EHS experience within industrial manufacturing or fabrication environments, • 5+ years of leadership experience managing EHS programs or safety teams, • Strong working knowledge of OSHA regulations and environmental compliance standards, • Experience implementing safety systems within ISO-aligned manufacturing environments, • Proven experience leading incident investigations and corrective action programs, • Strong knowledge of industrial hazards including welding, fabrication, heavy equipment, and manufacturing processes, • Demonstrated ability to influence plant leadership and drive safety culture improvements Preferred Qualifications • Certified Safety Professional (CSP), Certified Industrial Hygienist (CIH), or similar certification, • Experience in fabrication, modular manufacturing, or heavy industrial environments, • Experience supporting multi-site manufacturing operations, • Familiarity with environmental reporting, hazardous materials management, and sustainability initiatives, • Experience building enterprise EHS programs in growth-stage manufacturing organizations

Job Description Daemen University is a dynamic, independent, liberal arts institution committed to excellence in student centered learning. The University places special emphasis on preparing students for excellence in professional life, civic engagement, and on instilling and understanding that learning is an exciting lifelong journey. Students are encouraged to be creative, innovative, ethically minded leaders for an ever-changing, diverse, and interconnected world. The Mission of Daemen University is to prepare students for life and leadership in an increasingly diverse and complex world through the integration of education and professional preparation. Daemen University is going beyond instrumental needs to foster the development of individuals who are dedicated to the health and well-being of local and global communities. About This Opportunity Joining our Natural Sciences team, the Physics Laboratory Instructor will be responsible for the following: PHY 201L (General Physics I laboratory); 1 Credit Hour(s) PHY 201L: Topics focus on scientific reasoning and experimental design while exploring concepts of velocity, acceleration, forces, and vectors. • Experience with "active learning" in both an online and face to face modality., • Demonstrates strong interpersonal and communication skills, verbal and written, necessary to interact effectively with all university constituents., • Strong time management/organizational skills., • Demonstrated ability to work with students, faculty, staff, and all university administration., • Demonstrated commitment to working with diverse populations., • Demonstrated effectiveness in teaching. Please submit letter of interest, curriculum vitae, transcripts (official or unofficial) and contact information for two (2) references to application Required Qualifications Master's degree in Physics or related fields; previous experience teaching college-level science preferred. Daemen University strongly encourages all campus community members to get vaccinated for COVID-19, including a booster vaccine. Job Posted by ApplicantPro

Job Description PRN Physical, Occupational, and Speech Therapy, an affiliate of The Weston Group, is dedicated to providing evidence-based, person-centered therapeutic services to residents. We are proud to remain a therapist-owned and operated company that believes in a unique and innovative approach to geriatric care. We're looking for a Part time Physical Therapist Assistant to act as the patient's partner throughout the trip of restoring motion and ensuring that the client will function at their personal best. As a result, you will maximize the quality of life and movement potential within the promotion, prevention, diagnosis, treatment or intervention, and rehabilitation. Boutique outpatient Physical Therapy clinic, specializing in senior orthopedics, pulmonary disorders, gait and balance training, and women's health, searching for part time PTA to be a part of this small patient- centered team. No weekends! RESPONSIBILITIES • Demonstrate skill in the use and proper choice of physical therapy techniques and treats patients effectively with good response., • Maintains and enhances patient dignity and modesty during treatments, • Shows appropriate therapist-patient rapport explaining the treatments and discussing the reasons for occupational therapy with patient, etc., • Follows accepted precautions and contraindications for treatment., • Utilizes appropriate therapeutic techniques., • Provide accurate and timely patient records., • Completes daily documentation procedures assuring that all services are appropriately accounted for from a clinical and billing perspective., • Communicates and documents significant changes in patient progress as a result of treatment and accepts modified treatment plan if needed., • Documents equipment provided, home programs and handouts given to the patient., • Documents all communication with physicians and POA concerning patient's status., • Communicate with others maintaining a professional attitude to assure quality care., • If directed by the Physical Therapist, contacts physicians as needed to clarify diagnosis or orders, change treatment, or discharge., • Consults patient's POA, nurses, social workers, occupational and speech therapists, and physicians as appropriate and needed., • Notifies facility personnel and family as to use of equipment., • Attends patient related meetings in accordance with facility policy., • Demonstrate knowledge of insurance guidelines as related to applicable rehabilitation services., • Perform all other duties and functions necessary for the maintenance of efficient, economic and quality operation of the department., • Projects and maintains a professional appearance., • Makes suggestions for department improvement and assists in development of these as appropriate., • Intensive education and clinical expertise, • Ability to manage patients with different types of personalities, • Current knowledge of treatment practices, • Drive to learn and grow continually, • Professional behavior Physical Therapy Assistants must possess an appropriate Associate of Science degree from an accredited institution LICENSURE OR REGISTRY REQUIREMENTS Physical Therapy Assistants must be licensed in the state practicing by the Board of Physical Therapy and provide an acceptable Criminal Background Check. Apply directly on our website-

Job DescriptionJoin a team that nourishes life from farm to table! Upstate Niagara Cooperative, proudly owned by 200+ local family farms, is one of America’s largest and most stable dairy cooperatives. Guided by farmer- and employee-led values, we process and market high-quality milk, yogurt, dips, sour cream, cottage cheese, and more under our trusted brands: Upstate Farms®, Bison®, Milk for Life®, and Intense Milk®. Here, you’ll support sustainable farming, strong communities, and the mission to deliver fresh, local dairy to families every day. The Off-Shift Quality Assurance (QA) Supervisor is responsible for overseeing quality operations across second and third shifts, ensuring compliance with food safety, quality, and regulatory standards at Upstate Niagara Cooperative, Inc. This role works closely with the QA Manager and Assistant QA Manager to provide leadership, direction, and support to QA technicians and plant personnel, ensuring consistent quality practices during off-shift operations. The role will primarily be on 3rd shift along with weekends and holidays. Key Responsibilities • Work closely and communicate daily with the QA Manager and QA Assistant Manager to ensure alignment on priorities, issues, and corrective actions., • Supervise QA operations across second and third shifts, providing daily direction, guidance, and support to QA technicians as necessary., • Ensure all QA technician responsibilities and required documentation are completed accurately and on time by the end of each shift., • Assist with training and onboarding of new QA technicians, as well as ongoing training for current technicians and plant personnel., • Support scheduled preventive maintenance (PMs) and troubleshooting of laboratory equipment; coordinate repairs as needed., • Assist with laboratory and plant equipment calibrations., • Support Organic, Allergen, Gluten-Free, and Environmental monitoring programs, including weekly, monthly, and annual swabbing, and assist with internal and external plant audits as required., • Assist with training QA technicians on approved laboratory procedures, laboratory equipment, finished product formulas, finished product specifications, and formula batching requirements., • Oversee inventory and ordering of laboratory supplies., • Support the QA Assistant Manager with daily and weekly employee scheduling, including overtime planning and coverage. Education • 3-5 years experience prior Quality Assurance experience in a food manufacturing environment required., • Dairy or other regulated food manufacturing experience preferred., • Working knowledge of GMPs, food safety programs, and quality systems., • Strong verbal and written communication skills., • Strong organizational and time management skills., • Leadership and team development, • Attention to detail, • Problem-solving and decision-making, • Ability to work independently during off-shift operations, • Ability to work in a manufacturing environment, including exposure to cold temperatures, noise, and production areas., • Ability to stand, walk, and conduct inspections for extended periods., • Ability to lift up to 40 pounds as required., • The salary range listed for this position represents the good faith and reasonable minimum and maximum pay for this role at the time of posting. Actual compensation may vary based on factors including, but not limited to, experience, skills, training, knowledge, education, and overall qualifications. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job Description Do You Want To: Make good money, do what you love, work with great people, be at an amazing location, have room to grow in your career, gain and additional accredited certification, become a better bodyworker, work flexible hours with tips, receive free stretches and discounts on products? StretchLabNorthtowns (Amherst) and StretchLab Southtowns (Blasdell) wants people to join our growing team, who enjoy helping others on their health and wellness journey, are passionate about building community, are energetic and experienced and want to have fun doing it! Must have current certification or Bachlelors/Masters/Doctorate degree in one of the following: Massage Therapist, Athletic Trainer, Chiropractor, Yoga, Pilates, Dancer (Bachelors/Masters in Fine Arts w/ human anatomy/movement emphasis), Personal Trainer (NASM, ACE), Physical Therapy or Physical Therapy Aide OR Kinesiology, Sports Medicine, Exercise Science or Human Biomechanics degree. Benefits: • Part-time roll (with potential for full time) with a minimum of 15 hours per week. Must be over 3 days per week and Saturday shifts from 8-2pm are required. 5-6 hour shifts in an enjoyable studio environment with occasional outside/outdoor events., • Competitive hourly rate, plus gratuities, with possibility for raises at reviews every 6 months., • Fully Paid Flexologist Training and Certification (60+ hours)., • Growth opportunities: achieving different Flexologist Levels or Master Flexologist Level, • Skills sharing with your team members, including stretches with each other., • Staff outings and public events., • Free, 4x25 minute Stretch Session Monthly Membership (while employed), • Retail items at cost or discounted (while employed),, • Uniforms: including shirts, sweatshirts and grip socks., • Monthly studio goals to earn extra bonus.Responsibilities:, • Managing client care by delivering a best-in-class stretching experience, updating client notes after each session, performing MAPS., • Ensure the safety of clients in regard to proper stretch techniques and enforce StretchLab policies and safety rules., • Encourage and motivate clients throughout stretch sessions., • Build StretchLab membership and retain current clientele through personal interaction and outreach., • Attend staff meetings and required educational presentations., • Assist Sales Associate and General Manager with sales by delivering best-in-class knowledge in each session and tracking member's goals., • Participate in social media content to deliver a local and honest representation of our service., • Clean and maintain all equipment in order to ensure it is available for client use at any given time., • Love of boutique fitness environment is a must-passion for stretching, mobility and flexibility., • Experience working in a fitness/health environment where you provide hands on training with a client, desired., • Fitness certification or degree required from one of the following: Massage Therapist, Athletic Trainer, Chiropractor, Yoga, Pilates, Dancer (Bachelors/Masters in Fine Arts w/ human anatomy/movement emphasis), Personal Trainer (NASM, ACE), Physical Therapy or Physical Therapy Aide OR Kinesiology, Sports Medicine, Exercise Science or Human Biomechanics degree., • Ability to create positive environment that welcomes all people., • Fantastic communication skills and exudes empathy., • Must love connecting with people and have a passion for helping them achieve goals., • Must be available to attend our 2-day Flexologist Training Program, which includes 20-25 hours of online tutorials prior to the 2 day hands on training and 20 hours of practice stretches., • Must be available for shifts Monday through Thursday for either 8:00am-1:30pm or 1:30pm-7:00pm, Fridays 8:00am-12:00pm or 12pm to 4:00pm and Saturdays 8:00-2:00pm. (Schedule is determined on studios need)., • Must be able to commit to the position for a minimum of 6 months.The franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee an all hiring decisions will be made by management. All inquiries about employment at this franchisee should be made directly to the franchise location and not to StretchLab Corporate. Powered by JazzHR ivekNjE15i

Job Description MISSION STATEMENT Are you ready to give back to the community while pursuing your passion? For over 50 years, Acacia Network and its affiliates have been committed to improving the quality-of-life and wellbeing of underserved communities in New York City and beyond. We are one of the leading human services organizations in New York City and the largest Hispanic-led nonprofit in the State, serving over 150,000 individuals every year. Our programs serve individuals at every age and developmental level, from the very young through our daycare programs to mature adults through our older adults centers. Our extensive array of community-based services are fully integrated, bilingual and culturally competent. POSITION OVERVIEW The Psychiatric Nurse Practitioner (NP) is a licensed independent practitioner that serves as a primary and/or specialty care provider. The NP works autonomously and/or in coordination with other healthcare professionals. The NP is responsible for facilitating advanced primary and specialty nursing services to the health center’s patients within the scope of their licensure. They possess the training and competency required while using national standards of care as a framework for managing patient care and acts as advocate for policies and practice that benefit the patient/community. KEY ESSENTIAL FUNCTIONS • Conduct psychiatric evaluations and assessments., • Conduct mental status examinations and pharmacological evaluations., • Prescribe medications, teach clients about side effects and monitor response to prescribed medications, including ordering of laboratory tests as needed., • Administer injectable medications as needed., • Complete all documentation (i.e. progress notes and psychiatric assessments) as required in a timely manner in the electronic medical record (EMR)., • Review and provide recommendations for treatment plans., • Provide expedited services to clients based on risk assessment status as clinically indicated., • Provide crisis intervention services to clients as needed., • Communicate with other medical practitioners in order to coordinate treatment for clients., • Speak with managed care insurance representatives to obtain authorizations for prescribed medications when needed., • Participate in staff meetings and case conferences., • Collaborate with primary therapists, clinical supervisor and program director to discuss status of client progress in treatment and provide input/guidance on treatment planning and risk management issues., • Maintain an 80% show rate for clients who are scheduled for regular appointments., • Provide a behavioral risk screening for new patients and share the findings with the primary care team., • Provide a comprehensive psychiatric evaluation as requested., • Provide ongoing psychopharmacological management as clinically appropriate., • Recommend and provide behavior management interventions as appropriate and functions as a member of behavior rapid response team., • Collaborate psychiatric management with the members of the primary care team and the attending psychiatrist., • Participate in inter-departmental collaborative committees as needed and quality assurance and performance improvement activities., • Document clinical activities in the medical record and maintain documentation of administrative activities., • Active and unrestricted New York State Nurse Practitioner License., • Active and unrestricted New York State Registered Professional Nurse License., • An advanced degree, either an MSN (Master of Science in Nursing) orDNP(Doctor of Nursing Practice) from an accredited nursing program., • Board certification from The American Nurses Credentialing Center (ANCC) or The American Association of Nurse Practitioners (AANP)., • Application and/or maintenance ofNationalProvider Identifier (NPI)., • Active and unrestricted Drug Enforcement Agency (DEA) registration., • Active and unrestricted DATA 2000 Waiver (buprenorphine), if applicable., • NYS mandated Infection Control certification (NYS DOH approved; 4 hours, valid for 4 years)., • Current Basic Life Support certification., • Must obtain Mandatedreporter(2 hours) within thirty (30) days., • Three years of practical experience in ambulatory carerequired., • Sound understanding of all federal, state and oversight agency regulations., • Knowledge of disease prevention., • Ability to work on a strong team of professionals in a culturally diverse environment., • Ability to multitask and to work and function under pressure. Acacia Network provides a comprehensive and competitive benefits package to our employees. In addition to a competitive salary, our benefits include medical, dental, and vision coverage. We also offer generous paid time off, including vacation days and paid holidays, to support a healthy work-life balance. We prioritize the well-being of our employees both professionally and personally. As an Equal Opportunity Employer, we encourage individuals from all backgrounds to apply.

Job Description Whitestone Associates, Inc., a 100% employee-owned company and leading provider of environmental and geotechnical engineering and consulting services throughout the eastern US, is currently recruiting for an Environmental Project Manager to join our team. This is a tremendous opportunity for experienced candidates to join and contribute to the growth of a 100% employee-owned engineering firm. We are seeking a motivated and enthusiastic Environmental Project Manager to join our team. The ideal candidate will have 5+ years of experience in environmental due diligence and remediation. This position requires a bachelor's degree in environmental science, geology, or a related field. The role is primarily office-based but may require some field visits depending on project complexity and staff training. Primary responsibilities include: data analysis, technical report preparation, technical report review, proposal development, and project coordination. Location: Buffalo, NY Responsibilities: • Support overall project management including scheduling, coordinating, and client interface;, • Prepare accurate and concise technical reports adhering to established guidelines;, • Review and edit technical reports;, • Provide mentorship and training to junior level staff;, • Conduct field sampling activities including soil, groundwater, and vapor sampling as per project requirements and regulatory guidelines on an as needed basis;, • Conduct environmental due diligence assessments including Phase I and Phase II Environmental Site Assessments on an as needed basis;, • Manage hazardous building materials assessments including asbestos, lead-based paint, mold, and indoor air quality evaluations, and oversee related sampling, analysis, and reporting activities;, • Analyze and interpret field data, laboratory results, and historical information to support the preparation of technical reports; and, • Stay up to date with current regulations and industry standards. Requirements: • Bachelor's degree in Environmental Science, Geology, or related field;, • 5+ years of relevant experience in environmental consulting preferred, particularly in the areas of due diligence investigation and remediation;, • Strong analytical and problem-solving skills, with the ability to interpret and analyze data;, • Excellent written and verbal communication skills;, • Ability to work independently and collaboratively in a team environment, managing multiple projects and deadlines simultaneously; and, • Professional Geologist certification (preferred but not required)., • ASTM Certified Environmental Professional (preferred but not required). Benefits: • The estimated salary range for this position is $75,000 to $100,000., • Whitestone's Employee Stock Ownership Program (offered at no cost to each eligible employee), • Medical Insurance, • Dental Insurance, • Health & Dependent Care Flexible Spending Accounts, • Traditional & Roth 401K Plans with Company Match, • Long Term & Short Term Disability Insurance, • Company-Sponsored Life & AD&D Insurance, • Multiple AFLAC Insurance Products, • Pet Insurance, • Identity Theft Protection, • Multiple Corporate Discount Programs

Job Description Join a team that nourishes life from farm to table! Upstate Niagara Cooperative, proudly owned by 200+ local family farms, is one of America’s largest and most stable dairy cooperatives. Guided by farmer- and employee-led values, we process and market high-quality milk, yogurt, dips, sour cream, cottage cheese, and more under our trusted brands: Upstate Farms®, Bison®, Milk for Life®, and Intense Milk®. Here, you’ll support sustainable farming, strong communities, and the mission to deliver fresh, local dairy to families every day. The Plant Manager provides strategic and hands-on leadership to ensure safe, efficient, and high-quality dairy production. This position is accountable for daily operations, including production, maintenance, quality, and workforce development. The Plant Manager drives a culture rooted in the Seven for Success (SFS) framework — championing Safety first, maintaining the highest Quality standards, improving Productivity, strengthening Customer Service relationships, promoting open Communication, developing employees through Training, and fostering Continuous Improvement in every process. This individual serves as a key member of the Operations Leadership Team and collaborates across departments to support growth, modernization, and organizational excellence. Key Responsibilities: Oversee Daily Production Operations • Direct all plant operations to ensure production schedules, quality standards, and cost targets are achieved., • Maintain effective communication across shifts to ensure consistent performance., • Ensure compliance with all federal, state, and local regulations (FDA, USDA, HAACP, OSHA, SQF, etc.)., • Partner with Quality Assurance to uphold product integrity and food safety systems., • Coach, mentor, and develop supervisors and frontline employees to foster a culture of accountability and teamwork., • Track key performance indicators (KPIs) such as throughput, yield, OEE, quality, and labor efficiency., • Develop and manage annual operating budgets and capital plans., • Lead Lean, Six Sigma, and CI efforts to enhance efficiency and reduce waste., • Partner with Quality, Maintenance, Supply Chain, Finance, and HR to achieve business objectives., • Oversee preventive and predictive maintenance programs to minimize downtime and extend equipment life., • Promote a proactive safety culture with zero tolerance for unsafe practices., • Develop and execute long-term operational strategies that align with cooperative growth objectives., • Ensures Accountability: Holds self and others responsible for meeting commitments., • Communicates Effectively: Delivers clear, timely, and respectful communication across levels., • Manages Complexity: Makes sound decisions amid uncertainty and competing priorities., • Customer Focus: Builds strong relationships and ensures satisfaction through consistent quality and service., • Directs Work: Delegates effectively and sets clear expectations for performance and results., • Financial Acumen: Understands budgets, cost drivers, and financial impacts of operational decisions., • Drives Results: Consistently delivers against production, safety, and financial targets., • Manufacturing Systems and Process Knowledge, • Food Safety and Quality Systems, • Maintenance and Reliability Program Management, • Continuous Improvement and Lean Manufacturing, • Production Planning and ERP Systems, • Bachelor’s degree in Operations Management, Engineering, Food Science, or related field (preferred)., • Minimum 5 years of leadership experience in food or dairy manufacturing., • Strong knowledge of GMP, SQF, HACCP, and other regulatory standards., • Demonstrated ability to lead cross-functional teams and manage change., • Proficiency in Microsoft Office and ERP systems (SAP experience preferred)., • Must be able to work in a manufacturing environment with exposure to temperature variation, noise, and physical activity. Pay: $150k-$185k a year* • The salary range listed for this position represents the good faith and reasonable minimum and maximum pay for this role at the time of posting. Actual compensation may vary based on factors including, but not limited to, experience, skills, training, knowledge, education, and overall qualifications. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job Description Purpose of Role Join a nationally recognized College of Health Professions with a nearly 50-year legacy of excellence in clinical education and licensure success. This role offers the opportunity to teach cadaver-based gross anatomy within a newly renovated, state-of-the-art laboratory and to contribute to the education of future physical therapists and physician assistants. Candidates with backgrounds in anatomical sciences, medicine, physical therapy, or physician assistant education who have a passion for clinically applied anatomy are encouraged to apply. About This Opportunity Joining our College of Health Professions team, the Clinical & Functional Anatomical Sciences Assistant/Associate Professor will be responsible for the following: Daemen University invites applications for a full-time, 12-month, tenure-track faculty position to teach Graduate Human Gross Anatomy in the Scott Bieler College of Health Professions (SBCHP) starting 01 July 2027. This is an exciting opportunity to join a dynamic, student-centered academic community committed to excellence in health professions education, interprofessional collaboration, and clinical relevance. The successful candidate will serve as a SBCHP faculty member responsible for delivering high quality instruction in Graduate Human Gross Anatomy to students in the Doctor of Physical Therapy (DPT) and Master of Science in Physician Assistant Studies (PA) programs. Students in both programs engage in cadaver-based dissection, applied clinical anatomy, and interprofessional learning experiences that prepare them for real world healthcare environments. The faculty member will play a central role in advancing anatomical sciences education within a newly renovated, state-of-the-art gross anatomy laboratory suite. Contingent upon expertise and interest, additional teaching opportunities may be afforded in the DPT and/or PA department curricula. Required Qualifications • Academic Doctoral degree in a relevant field (e.g., PhD in Anatomy, Anatomical Sciences, Biomedical Sciences, Neuroanatomy, or related discipline) or a professional medical doctorate (e.g., MD, DO) with significant anatomy teaching experience. Consideration will be made for applicants with significant anatomy teaching experience who either hold a DPT degree combined with an ABPTS certification, or a PA with a Master's degree, • Demonstrated experience teaching human gross anatomy with cadaver dissection at the graduate or professional level, • Strong understanding of clinically applied functional anatomy, particularly relevant to medical practice and rehabilitation, • Experience with the administration and oversight of a cadaver laboratory, including knowledge of state and federal regulations, legal and ethical standards, donor program coordination, and laboratory safety protocols, • Excellent communication and teaching skills with a commitment to student success, • Prior teaching experience in Doctor of Physical Therapy (DPT) and/or Physician Assistant Studies (PA) programs with evidence of integrating clinical correlations into anatomy instruction, • Record of scholarship or educational research in anatomy or health professions education, • Experience in interprofessional education (IPE) and team-based learning environments, • Demonstrated use of contemporary, evidence-based pedagogy, which may include active learning, flipped classroom models, and competency-based education, • Experience incorporating 3D anatomy visualization tools, simulation technologies, and digital education platforms to enhance student learning Daemen University offers a robust total compensation package that includes: • Health insurance with an option of two plans: an HSA plan with the deductible funded by employer HSA contributions, or a copay plan., • Dental insurance through the Guardian network., • Vision insurance through the Guardian network, and an option between the VSP or Davis plans., • An 8% employer contribution to the retirement savings account when employees contribute just 5%., • Fully paid long term disability insurance, guaranteed-issue life insurance for new hires up to a volume of $150,000., • Tuition waiver for full-time employees and their qualified dependents. Entrance in Tuition Exchange scholarship opportunities to pursue education at other institutions. Daemen University is a small private institution offering Baccalaureate, Masters, clinical Doctorates, and Academic Doctoral degrees in a wide variety of professional and liberal arts programs. Daemen University is a dynamic institution with over 2,600 full and part-time students and exhibits a rich history in health professions education. Located on a scenic suburban campus in Western New York, the local area offers numerous community festivals, a vibrant arts scene, world-class architecture, and outstanding cuisine. Its proximity to Niagara Falls and Canadian border, along with low housing costs, makes Western New York a wonderful place to reside and recreate. Applications should be submitted to and should include a cover letter of application, statement of teaching philosophy, curriculum vitae, and three references with contact information. Job Posted by ApplicantPro

Job Description Daemen University is a dynamic, independent, liberal arts institution committed to excellence in student centered learning. The University places special emphasis on preparing students for excellence in professional life, civic engagement, and on instilling and understanding that learning is an exciting lifelong journey. Students are encouraged to be creative, innovative, ethically minded leaders for an ever-changing, diverse, and interconnected world. The Mission of Daemen University is to prepare students for life and leadership in an increasingly diverse and complex world through the integration of education and professional preparation. Daemen University is going beyond instrumental needs to foster the development of individuals who are dedicated to the health and well-being of local and global communities. Purpose of Role The Education Department at Daemen University is seeking a full-time tenure track faculty member to teach in our undergraduate and graduate inclusive childhood and early childhood education programs. The successful candidate will be an experienced educator with a deep understanding of child development, instructional and assessment methods across elementary content areas, and culturally responsive/sustaining teaching practices. This position offers an exciting opportunity to contribute to the preparation of future educators and scholars committed to fostering inclusive learning environments in PK-12 education settings. This is a full-time benefits eligible position (tenure track). Daemen University is committed to fostering a diverse and inclusive learning environment. We strongly encourage applications from individuals who identify with underrepresented groups in higher education and from those who are passionate about advancing equity and inclusion in the field of education. Assistant Professor of Inclusive Child/Early Childhood Education About This Opportunity Joining our Education team, the Assistant Professor will be responsible for the following: • Teach undergraduate and graduate courses in inclusive education, focusing on early childhood and childhood curriculum and instructional methods across elementary content areas, • Provide instruction on evidence-based practices and other effective strategies for diverse learners, • Engage in course and curriculum development, aligning instructional practices with current research and educational standards, • Advise and mentor students in their academic and professional development, • Contribute to program assessment and continuous improvement efforts within the department, • Collaborate with faculty colleagues to support inclusive pedagogical practices that are culturally and linguistically responsive, • Participate in departmental meetings, faculty committees, and university service activities, • Conduct scholarly research and contribute to the academic community through presentations, publications, and professional development Required Qualifications • Teaching Certification in Childhood Education (1-6) and/or Early Childhood Education (B-2), • Terminal Degree (Ph.D. or Ed.D.) in Education or a related field (ABD considered if a dissertation/capstone defense date is set), • At least 3 years of teaching experience in PK-12 settings, • Experience teaching courses in higher education, • Familiarity with a range of pedagogies and culturally and linguistically responsive-sustaining practices, • Ability to teach instructional methods courses across elementary content areas (e.g., literacy, math, science, and social studies), • Certification and/or expertise in teaching students with disabilities (i.e., Special Education), • Expertise in literacy, STEM, and/or adolescent teaching methods, • Experience teaching in a variety of instructional modalities - in-person, hybrid, and online (synchronous and asynchronous), • Experience in curriculum design, course development, and/or program assessment, • Fluency with instructional technology and experience integrating technology into instructional practice Total Compensation Daemen University offers a robust total compensation package that includes: • Health insurance with an option of two plans: an HSA plan with the deductible funded by employer HSA contributions, or a copay plan., • Dental insurance through the Guardian network., • Vision insurance through the Guardian network, and an option between the VSP or Davis plans., • An 8% employer contribution to the retirement savings account when employees contribute just 5%., • Fully paid long term disability insurance, guaranteed-issue life insurance for new hires up to a volume of $150,000., • Tuition waiver for full-time employees and their qualified dependents. Entrance in Tuition Exchange scholarship opportunities to pursue education at other institutions., • Generous time off for administrative and staff employees. Daemen University strongly encourages all campus community members to get vaccinated for COVID-19, including a booster vaccine. Job Posted by ApplicantPro

Job DescriptionAbout Milestone Funeral Partners Milestone Funeral Partners is a growth-oriented company that partners with and operates funeral homes, cemeteries, and crematories across multiple states. We are committed to preserving the legacy of each location while providing the support, systems, and resources needed to deliver exceptional service to families and communities. Our teams are deeply rooted in the communities they serve, and we take pride in supporting compassionate professionals who are dedicated to honoring lives with care, respect, and professionalism. Position Summary We are always looking to connect with Licensed Funeral Directors in the Southwest New York, Amherst, Buffalo and Orchard Park area who are passionate about serving families and contributing to a high-quality, team-oriented environment. This is a posting for current and future opportunities across our locations. As a Funeral Director with Milestone, you will be responsible for supporting families through all aspects of funeral arrangements, services, and care, while upholding the highest standards of professionalism and compassion. Minimum Qualifications: • Valid Funeral Director license as required by state regulations, or ability to be fully licensed within 6 months of employment commencement., • High school diploma or equivalent; completion of a mortuary science program is preferred., • Demonstrated experience in funeral service or related field., • Strong knowledge of funeral service laws, regulations, and ethical standards., • Associate’s or Bachelor’s degree in Mortuary Science or related discipline., • Experience with grief counseling or bereavement support., • Familiarity with diverse cultural and religious funeral practices., • Proficiency in funeral home management software., • Consult with families to understand their needs and preferences for funeral services., • Arrange and coordinate all logistical aspects of funerals, including transportation, embalming, and service scheduling., • Prepare and file necessary legal documents such as death certificates and permits., • Oversee the preparation and presentation of the deceased, ensuring respectful and appropriate care., • Collaborate with cemeteries, crematories, clergy, and other service providers to facilitate seamless funeral services., • Manage funeral home facilities and ensure compliance with health and safety regulations., • Provide emotional support and guidance to grieving families throughout the funeral process., • Ability to remain physically present and engaged for extended periods during services and visitations, which may involve standing, walking, or use of a mobility aid., • Ability to transport, move, or assist with handling objects weighing up to 75 pounds (e.g., caskets, equipment, floral arrangements) individually and up to 250 pounds in tandem, with or without reasonable accommodation., • Capacity to perform physical movements such as bending, kneeling, reaching, or positioning, as required for funeral service preparation, with or without assistance or adaptive tools., • Sufficient manual dexterity to handle paperwork, operate standard office and mortuary equipment, and perform related tasks., • Visual and auditory ability to interact professionally with families, team members, and members of the public, with or without assistive devices., • Willingness to work in a variety of indoor and outdoor settings, potentially during evenings, weekends, and holidays. The role requires strong interpersonal skills to sensitively communicate with grieving families and provide compassionate support. Organizational skills are essential for managing multiple funeral arrangements simultaneously and ensuring all legal and logistical details are handled accurately. Knowledge of mortuary science and funeral regulations is applied daily to maintain compliance and uphold professional standards. Technical skills, including the use of funeral home management software, facilitate efficient scheduling and record-keeping. Additionally, cultural competence and emotional intelligence enable the Funeral Director to honor diverse traditions and provide meaningful, personalized services.

Job Description Join a team that nourishes life from farm to table! Upstate Niagara Cooperative, proudly owned by 200+ local family farms, is one of America’s largest and most stable dairy cooperatives. Guided by farmer- and employee-led values, we process and market high-quality milk, yogurt, dips, sour cream, cottage cheese, and more under our trusted brands: Upstate Farms®, Bison®, Milk for Life®, and Intense Milk®. Here, you’ll support sustainable farming, strong communities, and the mission to deliver fresh, local dairy to families every day. Essential Duties and Responsibilities: • Achievement of established department goals of load-out, production volume, quality, safety, and cost reduction., • Provides leadership and guidance to employees for the purpose of development and establishment of a good working atmosphere., • Coordinates daily load-out and production activities to meet business objectives., • Communicates non-compliances in a timely fashion to appropriate Managers for corrective action., • Communicates with department managers to maintain efficient operations., • Assigns job responsibilities to employees, according to policies, to meet planned shipping and production schedules ensuring that the proper equipment and operating techniques are followed., • Monitors changes in employee morale and works to resolve problems within departments., • Maintains employee records and inputs employee time into payroll system, • Responsible for ordering and maintaining inventory for all packaging for the facility., • Responsible for ordering and maintaining inventory for all fruits for the facility., • Responsible for ordering and maintaining inventory for all ingredients for the facility., • Ensures standard operating procedures for job functions are accurate and up to date., • Maintains product/code rotation of Cooler and Plant inventory. (FIFO) First in, First out., • Responsible for assigned safety program. (Forklifts), • Conducts accident investigations as needed., • Responsible for Cooler and Warehouse employee job performance, including safety, orientation, training, and discipline., • Assures compliance with employee relations policies and programs., • Monitors and enforces all Company policies., • Instructs and trains current and future employees as needed., • Coordinate’s load-out schedules, production runs, bills of lading, trailer inventories, and master sanitation schedules., • Check daily inbound for discrepancies using our ERP system., • Schedule inbound daily deliveries., • Review daily pick sheets, • Cycle count from pick sheets daily., • Inventory corrugate (trays, boxes) against the daily plan for accuracy, • Manage inventory of fruit, powder, & ingredient lot codes. FIFO., • Manage fruit inventory accuracy and make ERP adjustments weekly, • Audit WIP inventory usage weekly and make inventory adjustments in ERP., • Schedule delivery appoints with external storage warehouses for inbound fruit and packaging., • Schedule weekly recyclable pickups., • Manage product / material holds, vendor returns, and obsolete items., • Leads continuous improvement activities to improve safety, losses, performance results, processes, and costs., • Actively participates in the Management review process., • High school diploma, • Demonstrated ability to lead and motivate people, • Demonstrated ability to evaluate the performance of direct reports, • Ability to think analytically, • Ability to communicate clearly, verbally and in writing, • Ability to manage time effectively, • Must show enthusiasm, initiative, pride in work and a commitment to the organization and its mission, • Good computer skills, demonstrating proficiency in MS Windows, Word, and Excel, • Ability to work with ERP systems., • Bachelor’s degree in Food Science or Business discipline, • The salary range listed for this position represents the good faith and reasonable minimum and maximum pay for this role at the time of posting. Actual compensation may vary based on factors including, but not limited to, experience, skills, training, knowledge, education, and overall qualifications. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job DescriptionGrider Support Services - Registered Dietician Overview: We are seeking a skilled and compassionate Registered Dietician to join our team. As a Registered Dietician you will play a crucial role in assessing and making recommendations for patients with specialized dietary needs. ???? Location:462 Grider Street Buffalo, NY ???? Department: Terrace View ???? Shift: Full-time: Monday-Friday Day shift, varied Pay Range: $65,000.00-$72,000.00 Annually Why Grider Support Services? • Work-Life Balance: Enjoy a schedule with no nights or weekends., • Comprehensive Benefits: Rich medical, dental, vision package with a 100% employer funded HRA!, • Generous Paid Time Off: 10 paid holidays, plus PTO and a sick bank., • Secure Retirement: 401(k) plan with a 3% match, • Peace of Mind: Employer paid life insurance policy and other voluntary life insurance offerings., • Conduct comprehensive nutritional assessments for patients/clients based on medical history, lab results, and current dietary intake., • Develop, implement, and monitor individualized nutrition care plans to address specific health needs and goals., • Provide evidence-based nutritional counseling and education to individuals and groups., • Collaborate with healthcare professionals including physicians, nurses, and therapists to integrate nutrition into overall care., • Monitor and evaluate the effectiveness of nutrition interventions and adjust care plans as needed., • Document assessments, interventions, and outcomes in electronic medical records (EMR) accurately and timely., • Ensure compliance with federal, state, and local regulations, as well as organizational policies and standards., • Participate in quality improvement initiatives and performance reviews related to nutrition services., • Stay current with the latest research and best practices in dietetics and nutrition science., • Provide support for menu planning and food service operations when applicable (e.g., in inpatient or long-term care settings)., • Educate staff, patients, and the community on topics such as disease prevention, weight 11. management, and healthy eating., • Support discharge planning by providing follow-up nutrition resources and referrals when needed., • Participates in multidisciplinary program development and evaluation, treatment modalities and emergency crisis/response, • Participates in/ assists with the planning and implementation of performance improvement activities to promote continuous improvement in care delivery, • Assists in education and training programs, policy writing, and research/program development, • Deliver exemplary customer service to provide a positive patient experience across the organization, • Demonstrates cultural competence and a willingness to work with diverse populations., • Demonstrates competence in assessing an individual’s social determinants of health and implementing effective strategies to overcome barriers, • Collaborates with and promotes teamwork among all member of the healthcare team and openly expresses ideas for new programs or enhancements to current programs and services Minimum Qualifications of Registered Dietician: Education: Bachelor’s degree in nutrition and/or dietetics, required Master’s degree, preferred Experience: 1-2 years of experience working in a medical, clinical, or hospital setting, preferred License/Registration/Certification: Possession of a valid, active license and current registration to practice as a Registered Dietician in New York State Specialized Knowledge/Skills: • Proficiency in Electronic Medical Records (EMR), computer skills and knowledge in nutritional software programs, • Knowledgeable about specific disease states, nutrition support, and eating disorders, • Ability to provide medical nutrition therapy, conducting nutrition assessments, and implement the nutrition care process, • The pay range listed is a good faith determination of potential base compensation that may be offered to a successful applicant at the time of posting. When determining pay, several factors will be considered including but not limited to location, specialty, service line, years of relevant experience, education, professional credentials, internal equity, and budget.

Job Description Daemen University is a dynamic, independent, liberal arts institution committed to excellence in student centered learning. The University places special emphasis on preparing students for excellence in professional life, civic engagement, and on instilling and understanding that learning is an exciting lifelong journey. Students are encouraged to be creative, innovative, ethically minded leaders for an ever-changing, diverse, and interconnected world. The Mission of Daemen University is to prepare students for life and leadership in an increasingly diverse and complex world through the integration of education and professional preparation. Daemen University is going beyond instrumental needs to foster the development of individuals who are dedicated to the health and well-being of local and global communities. Purpose of Role Daemen University invites qualified applicants for a full-time, 9-month, tenure-track faculty position in the Department of Nursing starting 1/1/27. We seek a dedicated nurse educator committed to student-centered learning, academic excellence, and contributing to a dynamic, collaborative academic community at a liberal arts institution. The faculty member will teach in the graduate Nurse Practitioner and Doctor of Nursing Practice programs and will contribute to curriculum development, academic advisement, departmental service, and scholarly activity. About This Opportunity Joining our Nursing team, the Assistant Professor will be responsible for the following: Teaching graduate courses in the Department of Nursing. Participating in curriculum design, course development, and continuous improvement to maintain alignment with current nursing practice. Engage in scholarly, professional, or practice-based activities consistent with tenure-track expectations. Contribute to departmental, college, and university service activities. Assist with marketing, recruitment, and outreach efforts for the Nursing Department and Daemen University. Collaborate with faculty, staff, and healthcare agency partners to support effective program operations. Within the Scott Bieler College of Health Professions, Daemen offers several different nursing degree tracks. A RN-BS program is offered at the undergraduate level. Daemen University offers several graduate degree programs, including Adullt-Gerontology Primary and Acute Care Programs, Nursing Education, and Nursing Leadership and Health Administration programs. Required Qualifications Master of Science in Nursing (MSN). Active enrollment in a doctoral degree in nursing or related field. Current RN licensure in New York State. Current certification as an Advanced Practice provider (FNP, AGPCNP, AGACNP). Preferred qualifications Doctoral degree in nursing or a related field (PhD., DNP, EdD.). Higher education teaching experience. Evidence of scholarly activity and/or clinical expertise. Experience working with diverse learners in academic or clinical settings. The review of applications begins immediately and will continue until the position is filled. Applications should be submitted to and should include a cover letter, statement of teaching philosophy, curriculum vitae, and three references with contact information. Total Compensation Daemen University offers a robust total compensation package that includes: • Health insurance with an option of two plans: an HSA plan with the deductible funded by employer HSA contributions, or a copay plan., • Dental insurance through the Guardian network., • Vision insurance through the Guardian network, and an option between the VSP or Davis plans., • An 8% employer contribution to the retirement savings account when employees contribute just 5%., • Fully paid long term disability insurance, guaranteed-issue life insurance for new hires up to a volume of $150,000., • Tuition waiver for full-time employees and their qualified dependents. Entrance in Tuition Exchange scholarship opportunities to pursue education at other institutions., • Generous time off for administrative and staff employees. Daemen University strongly encourages all campus community members to get vaccinated for COVID-19, including a booster vaccine. Job Posted by ApplicantPro

Job DescriptionDescription: Are you an experienced Senior Environmental Specialist with expertise in asbestos, lead-based paint, PCB, and mold investigations? This is your opportunity to lead complex environmental projects from hazardous building materials assessments through abatement design and construction administration. You’ll develop detailed abatement plans and technical specifications, support regulatory compliance, review contractor documentation, respond to RFIs, and coordinate directly with clients and agencies—owning projects from investigation through successful project completion. If you’re ready to expand your technical leadership, take on high-impact environmental remediation work, and make a meaningful impact on public health and safety, we encourage you to apply today and take the next step in your environmental career. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do • Plan and implement regulated hazardous building materials surveys for renovation and demolition projects, including asbestos, lead-based paint, PCB-caulk, mold, and other hazardous and universal wastes., • Conduct bulk sampling, homogeneous area assessments, data analysis, quantification, and prepare detailed survey reports and sampling location plans., • Develop project-specific asbestos and hazardous materials abatement plans and associated technical specifications in compliance with OSHA, EPA, AHERA, NESHAP, TSCA, ICR 56, and other applicable federal, state, and local regulations., • Adhere to the project scheduling requirements for schematic design, design development, construction and bid document submittals., • Prepare hazardous waste management plans aligned with federal, state, and local regulations and requirements, including 6 NYCRR Parts 360, 364, and 370–373., • Serve as technical lead for major project phases, applying independent judgment in regulatory interpretation and problem resolution., • Provide construction administration support, including submittal review, request for information responses, contractor coordination, and regulatory agency communication., • Manage project scope, budgets, schedules, and deliverables to ensure quality, compliance, and client satisfaction., • Support proposal development, cost estimating, and business development initiatives., • Bachelor’s degree in Environmental Science, Environmental Engineering, Construction Management, or related field with 5+ years of experience in hazardous building materials, environmental compliance, or asbestos consulting., • Active OSHA 40-Hour HAZWOPER (with a current annual 8-Hour refresher) and valid NYS driver’s license., • NYSDOL-Certified Asbestos Building Inspector and Asbestos Project Designer required., • Additional certifications preferred: USEPA Lead Inspector and Risk Assessor, NYSDOL Article 32 Mold Assessor, Asbestos Project Monitor, and NYSDOH Radioactive Materials License (XRF)., • Experience preparing Hazardous Waste Management Plans and interpreting federal/NYS regulations., • Proficiency with MS Office, AutoCAD, Revit, Survey123, and the ability to read architectural renovation and demolition drawings with knowledge of building systems (HVAC, mechanical, plumbing, electrical, insulation, and building materials)., • Dedicated to fostering trusting relationships through collaboration, integrity and respect., • Deliver high-quality work using critical thinking, sound judgment, and exceptional organizational skills., • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and leadership of multidisciplinary design teams., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths and leadership opportunities., • You thrive in a culture that keeps work engaging and fosters a relaxed, easy-going atmosphere., • Your journey is supported by a team-driven environment that promotes mentorship and ongoing learning. Your Impact Matters, Your Career Thrives. We offer competitive salaries and benefits, including: Medical, Dental & Vision Insurance • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security The physical demands listed are required to perform the essential functions of this role. Reasonable accommodation may be provided in accordance with applicable law. • Ability to lift up to 25 lbs., traverse uneven terrain, and stand or walk for extended periods., • Ability to travel to and access project and construction sites, including working at heights (ladders, scaffolding, lifts, rooftops) and entering containment areas using proper fall protection and safety procedures., • Ability to follow Job Safety Analyses (JSAs) and Health & Safety Plans, and properly use required PPE, including respirators, Tyvek suits, gloves, hard hats, eye/hearing protection, and steel-toe boots., • Ability to work in office, field, and construction environments with exposure to dust, noise, fumes, temperature extremes, heights, and inclement weather., • Ability to pass annual physicals, including respirator fit and pulmonary testing. #LI-Hybrid

Job Description Daemen University is a dynamic, independent, liberal arts institution committed to excellence in student centered learning. The University places special emphasis on preparing students for excellence in professional life, civic engagement, and on instilling and understanding that learning is an exciting lifelong journey. Students are encouraged to be creative, innovative, ethically minded leaders for an ever-changing, diverse, and interconnected world. The Mission of Daemen University is to prepare students for life and leadership in an increasingly diverse and complex world through the integration of education and professional preparation. Daemen University is going beyond instrumental needs to foster the development of individuals who are dedicated to the health and well-being of local and global communities. Purpose of Role Part-time adjunct instructor role to teach Health Promotion coursework in the areas of: Community Health Education, Administration (health care management and policy), and Fitness related coursework. HPR 350 Fitness Testing and Programming $2550.00 per contract Required Qualifications Master's degree in related field, especially Community or Public Health, Health Administration or Exercise Science/Fitness Related; previous experience teaching college-level coursework preferred Daemen University strongly encourages all campus community members to get vaccinated for COVID-19, including a booster vaccine. Job Posted by ApplicantPro

Job Description Daemen University is a dynamic, independent, liberal arts institution committed to excellence in student centered learning. The University places special emphasis on preparing students for excellence in professional life, civic engagement, and on instilling and understanding that learning is an exciting lifelong journey. Students are encouraged to be creative, innovative, ethically minded leaders for an ever-changing, diverse, and interconnected world. The Mission of Daemen University is to prepare students for life and leadership in an increasingly diverse and complex world through the integration of education and professional preparation. Daemen University is going beyond instrumental needs to foster the development of individuals who are dedicated to the health and well-being of local and global communities. Purpose Part-Time Laboratory Instructor. Instructor will teach variable course credits ($1,025/credit). Instructor may teach several sections. Courses to be taught: IN PERSON, no remote options BIO 109L/110L: General Biology Lab I/II (1 credit each) BIO 109L: Topics include fundamentals in macromolecules, DNA/RNA/Protein synthesis, cell anatomy, cellular respiration, and photosynthesis. BIO 110L: Topics include fundamentals in evolution/cladistics, plant and animal anatomy and physiology, population and community ecology. Minimum Qualifications: Master's degree in Biology, Environmental Science, Biochemistry, or related fields; previous experience teaching college-level science preferred. Knowledge and Skills: Experience with "active learning" in both an online and face to face modality Demonstrates strong interpersonal and communication skills, verbal and written, necessary to interact effectively with all university constituents Strong time management/organizational skills Demonstrated ability to work with students, faculty, staff, and all university administration Demonstrated commitment to working with diverse populations Demonstrated effectiveness in teaching Post-Hire Trainings: Various trainings assigned upon hire and annually thereafter by the Office of Employee Engagement. The department will provide training on specific course content and online learning management system. Additional professional development trainings are optional and available through the Center for Excellence in Teaching and Learning (CETL). For consideration please also submit a letter of interest (include day/time available), curriculum vitae, transcripts (official or unofficial) and contact information for two (2) references. Review of applicants begins immediately and continues until the position is filled. Daemen University strongly encourages all campus community members to get vaccinated for COVID-19, including a booster vaccine. Job Posted by ApplicantPro