Trabajos heavy equipment en Buffalo, New York - Page 3Crear alertas

Perform basic preventative maintenance on equipment such as material handlers, skid steers, forklifts, etc. Diagnose and repair heavy machinery (forklifts, skid steers, etc. Carry out preventive maintenance on forklifts and skid steers.

Carry out preventive maintenance on forklifts and skid steers. Perform basic preventative maintenance on equipment such as material handlers, skid steers, forklifts, etc. Diagnose and repair heavy machinery (forklifts, skid steers, etc.

Job Description Company Profile: Anderson Equipment Company is one of the largest heavy equipment distribution companies in the Northeast. It is a family-owned, private company that has consistently grown and achieved financial success for almost 90 years. Currently in its third generation of family ownership and management, the company spans six states – West Virginia, Pennsylvania, New York, New Hampshire, Vermont, and Maine with 19 branch locations. Job Description Summary: Anderson Equipment’s Service Intern program is designed to enable the employee to gain experience in the maintenance and repair of construction equipment. While this position lists only 4 of our branches, all 19 are eligible for this program. Interns will take directions from the Service Manager, Leadman, or experienced Service Technicians over the duration of the internship. Interns will be assigned work which will include, but not be limited to: • Perform basic equipment maintenance., • Assist other Service Technicians in more complicated repairs., • Perform tasks such as:, • Loading and unloading machinery., • Completing check in and check out procedures., • Fueling equipment., • Steam cleaning machines., • Organizing equipment and attachments in yard. The goal of an internship is to expose the employee to new concepts and techniques while reinforcing subject matter covered in the individual’s classwork. Required Qualifications: • High school diploma;, • Currently enrolled in a two or four-year accredited vocational college relevant to the repair and maintenance of construction equipment;, • Basic familiarity of equipment operations, mechanical functions, electrical and hydraulic systems considered a plus;, • Basic understanding of computers and diagnostic programs provided by manufacturers., • Ownership of adequate hand tools. Compensation and Benefits: • Compensation depends on location, experience/skills, overtime: $19.00-$24.00 per hour., • This is a temporary position. The Service Intern is not eligible for company provided benefits including Paid Time Off (PTO).

Job Description Buffalo, NY or Syracuse, NY or Cleveland, OH regions available. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skills, and abilities required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Responsibilities include up to and not limited to: • Provide customers with maintenance, repair, and installation assistance of DMG MORI CNC machine tools on location or by telephone., • Creating and updating documentation of technical information., • Developing, preparing, generating, and analyzing ongoing and ad-hoc special reports pertaining to Service, • Demonstrating a willingness to help others and be a team member; often working together with Customer's Service Engineers., • Providing assistance and training to Customer's Service Engineers on the installation and maintenance of newer product lines., • Establish and build exemplary communication and customer service relationships with customers., • Manage difficult customer situations in a positive manner, respond promptly to customer needs and solicit customer feedback to improve service., • Bachelors or Associates Degree in technical related field of study preferred., • 3-5 years of experience in electrical and mechanical troubleshooting and maintenance of CNC machine tools., • Experience working with DMG or MORI SEIKI machines, Fanuc, Mitsubishi, and/or Siemens and controls are a PLUS., • Good verbal and written communication skills with exceptional customer service orientation., • Must be able to interact and effectively communicate in person and over the phone with people at all levels of an organization., • Proven ability to read mechanical drawings, electrical schematics, and sequence (PLC) ladder diagrams., • Basic computer literacy and working knowledge of MS Word, Excel, and Outlook., • Must be adaptable to changes in the work environment; manage competing demands and able to deal with frequent change, delays or unexpected events., • Minimum of 50% travel in multi-state region; drive or fly depending on distance. Employee is expected to work at the Technical Center when not visiting customers. Work Environment: Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated and manual machinery. General office environment experienced at DMG MORI office. Physical Demands: Frequent: Travel, operating a vehicle, sitting, standing, walking, bending, squatting, stooping, and reaching. Pushing, pulling, and lifting objects. Repetitive foot, leg, hand, arm, shoulder, and torso movements. Periodic: Operating power equipment, sitting at desk, utilizing computers and phones. Occasional: Lifting or moving up to 50lbs. #ZR

Job Description First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. First Student is hiring a Dispatcher in Botsford Pl., Buffalo, NY serving the Buffalo Public School District! Hours: Monday-Friday 8:00am-5:00pm Starting wage: $20 hr. At First Student, our Dispatchers are a constant reflection of our company's commitment to safety and customer service. The Dispatcher is responsible for dispatching all buses, ensuring on-time performance of routes, and counseling drivers and monitors on front line. At First Student, we are proud to offer: * Tremendous Career Advancement Opportunities due to a strong presence across North America * Positive and rewarding work environment * Full-time 1st shift Monday-Friday 8:00am-5:00pm * Starting wage $20 hr. * Full-time benefits including Medical, Dental, Vision and matching 401K Dispatcher Responsibilities: * Oversees all routes and scheduling of buses * Counsels and coaches drivers and monitors * Handles heavy phone and radio traffic * Takes all scheduling and driver complaints, report to Operations Supervisor/Contract Manager * Serves as primary communication liaison with major contracted customer * May handle charter reservations, billing, or driver payroll * Provides solutions to drop-off and pick-up problems * Handle back-up driver duties or perform miscellaneous clerical duties as needed * Completes assignment of special projects * Assists with supervision of day-to-day operations Dispatcher Experience and Skills Required: * 3-5 years' experience * High school diploma or equivalent * Basic knowledge of radio dispatch equipment * Excellent communication and customer service skills * Ability to deliver under time constraints and deadlines * Previous terminal operations, dispatch, or driver experience * Computer literate * Subject to DOT drug testing and physical. DOT Regulation 49 CFR Part 40 does not authorize the use of Schedule I drugs, including marijuana, for any reason. First Students commitment to putting our customers first, dedication to safety, and an ambition to deliver dependable transportation makes for a working environment you'll love. As a huge company with 120,000 staff and over 2.5 billion customers worldwide, you'll also enjoy security, a brilliant future, and excellent training. Apply today to join our team! We aspire to have a culture where all people are First. We strive to attract and retain a diverse workforce therefore all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. For candidates applying to positions in San Francisco or Los Angeles California, First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance or Los Angeles Fair Chance Ordinance. First is an equal opportunity employer and by doing so we will sustain and promote an inclusive culture that supports future growth for all." In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request .

Job Description Kitchen Hood/Exhaust Cleaning Technician - Third Shift Challenge yourself and grow with the Nelbud family. Certified technicians are preferred, and will receive premium pay. Entry-level technicians are welcome to apply. We will train you. What is Kitchen Exhaust Cleaning? This is a very physically demanding job that has great growth potential. Our technicians climb inside of the hood systems as well as climb on the roof with pressure washers to ensure the entire system is free of all grease. * Degreasing commercial hood systems * Power washing of kitchen exhaust hood systems, ductwork, hood filters and more * Clean rooftop exhaust fans and surrounding areas * Installation of auxiliary items including; access panels, hinge kits, and grease containment systems * Provide exceptional customer service while proudly representing NELBUD This is a remote crew that is local to the Rochester/Buffalo area but reports to our New Jersey and Pennsylvania branch. The technicians do not physically go to these shops once training is completed. All of the work is local and within about an hour's radius, and you will be traveling in a company-provided work truck. Some overnight traveling will be required. What's in it for you? * Growth – Start or Expand your career with us. Internal promotions are the Nelbud way. * Generous PTO – plus 8 observed holidays * Continuous safety training and development training - We will teach you and get you certified * All-around health benefits/insurance– health, dental, vision, and life * 2nd Chance Company - we give opportunities to hard-working individuals who just need a chance * Access to your money sooner with our Pay on Demand benefit! What do you need to become a Kitchen Exhaust Cleaning Tech? * Ability to work overnight with varying shift times - Shifts can start as early as 5 pm and as late as 12 am * Ability to access and tolerate small spaces and work in high places * Ability to endure all weather conditions - a portion of each shift is outside on rooftops * Physically demanding position - you will be on your feet, climbing ladders, and using heavy equipment * Strong work ethic - dependable, reliable, and trustworthy What do you need to be considered for a driving position? * Valid driver’s license is required – company truck provided from shop to job site * You must be at least 20 years old * A minimum of 3 years of driving experience is required We love what we do. We know you will, too. By leveraging technology and the talents of our world-class staff we are changing the way people think about their career! Come visit us at Only qualified candidates will be contacted. Please keep an eye on your email.

Job Description We are seeking an experienced full-time Remedial System Technician for our Remedial Construction group. Duties • Operation and maintenance of a variety of soil and groundwater remediation systems, including, but not limited to, soil vapor extraction, air sparge, hi vacuum/dual phase extraction, oxygen injection and product recovery., • 5+ years of relevant experience, • Strong mechanical aptitude and ability to troubleshoot pumps and electronic controls, • Valid NYS Driver License, • 40 Hour HAZWOPER certification, • Experience with NYSDEC standby contracts a plus, • Ability to operate heavy equipment a plus Salary Range: $22 - $30 per hour The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job DescriptionDescription: Snyder Industries, Inc., has openings for CNC Machinists. At Snyder Industries we are serious about our commitment to our employees. We are aligning ourselves to be an employer of choice among manufacturers and want to help you grow both personally and professionally. Available benefits include: Work/life balance with optional overtime Flexible schedule Double-time pay for all hours worked over 48 in a workweek 15% shift differential Quarterly Bonuses Medical ( 100% paid option available) Dental and Vision Life Insurance Paid Time Off A rewarding 401(k) program Annual work boot allowance Onsite Fitness Center Onsite Cafeteria Life Resources through our EAP Apply now to join our team of growing professionals and work for a company you’ll be proud of! An industry leader with over 50 years of experience, we specialize in providing high quality components for the heavy equipment industry utilizing our updated mills, lathes, gear and heat treating/induction machinery. If you desire a team atmosphere and want to excel, look no further! In our climate-controlled shop we offer OT instead of mandating it, making our employees and their needs a top priority to align with the realistic goals set by our customers. We set the bar high for both safety and cleanliness. Requirements: Objective: Produces machined parts by setting up and operating computer numerical controlled (CNC) machines, maintaining quality, efficiency, and safety standards as well as maintaining equipment and supplies. Role & Responsibilities: Plans machining by studying work orders, blueprints, engineering plans, materials, specifications, locations of surfaces, and machining parameters. Sets up mills and lathes by entering instructions, including zero reference points, setting tool registers, offsets, compensation and conditional switches, calculating requirements, including basic math, geometry, and trigonometry, proving part programs. Sets up mills and lathes by installing and adjusting three and four jaw chucks, tools, and attachments. Verifies settings by measuring first run parts and sample work pieces, adhering to established standards. Maintains specifications by observing drilling, grooving, and cutting, including turning, facing, knurling, and thread chasing operations, detecting malfunctions, troubleshooting processes, replacing worn tools, and adhering to quality assurance procedures and processes. Maintains equipment by completing minor preventive maintenance requirements, notifying maintenance of issues and completing maintenance request forms. Maintains continuity between shifts by communicating job status, irregularities, and continuing needs. Completes production and quality logs as required Maintains safe operations by adhering to safety procedures and regulations. Handles miscellaneous duties as required. Education & Experience: High School diploma or equivalency Skills & Abilities: Must be able to grasp conceptual items Must be able to follow G Code Participate in process improvement Must have good communication skills Possess a good mechanical aptitude Applies tooling coordination requirements Gives attention to detail Must be able to stand, stoop, bend, twist, reach, as well as wrench parts Ability to lift up to 50lbs occasionally Position Type/Expected Hours of Work: Hourly M-Th- 3 pm - 11: 30 pm, F 2:30 pm - 11 pm (2nd shift hours) Optional Overtime Equal Employment Opportunity Statement: Snyder Industries provides equal employment opportunity to all applicants and employees without regard to race, color, gender, age, disability, religion, creed, national origin, genetic predisposition, marital status, sexual orientation, victims of domestic violence, gender identity, gender expression, political belief or activity, veteran status, victims of domestic violence, familial status or any other status protected by law.