Hvac engineer jobs in White Plains, New YorkCreate job alerts

Job DescriptionDescription: As a Maintenance Technician, you are responsible for the inspection, repairs, and maintenance of a variety of hotel systems and equipment. Our Maintenance Technicians are thorough professionals with a practical mind and attention to detail. The ideal candidate will be able to work on a team or alone and observe all health and safety guidelines. The goal is to maintain the buildings and common areas in the best possible condition. This position may require flexible scheduling availability. Requirements: Job Requirements: • Recognize, report, and correct potential safety hazards (broken doors or railings, fire hazards, etc.) and notify supervisors of any damages, deficits, and disturbances, • Complete basic plumbing, electrical, HVAC, carpet and tile floor maintenance and repairs, • Complete painting, minor roof repairs, and other exterior projects, • Complete pool and exercise room equipment repairs if necessary, • Ongoing involvement in preventative maintenance programs, • Check stocking levels of all consumables and replace when appropriate, • Work with Chief Engineer and Management team to identify and accomplish all technical and skilled related projects, • Prepares all necessary reports during each shift for the management team, • When required, report to Hotel in bad weather conditions for maintenance of Hotel's exterior (snow shoveling, ice melting, etc.) Job Qualifications: • Highly motivated team player with strong initiative and desire for achievement, • Must be effective in handling problems in the workplace including anticipating, preventing, identifying, and solving problems as necessary, • Ability to work well in stressful situations, • Ability to complete work orders on a timely basis, • Readily available and approachable for all guests while providing excellent guest service, • Ability and willingness to respond to emergency situations on short notice, • Responsible for knowing Hotel emergency procedures The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand, sit or walk for an extended period of time. While performing the duties of this job, the employee is regularly required to lift and/or move up to 10 pounds and frequently lift and/or move up to 25 pounds. The number of hours you will be scheduled to work during the week is variable and is based on guest occupancy, season, staffing and other factors. Island Hospitality is unable to guarantee a specific number of work hours per week. Training: Island Hospitality is committed to employee development and displays that commitment with a formalized training and development program providing a clear path for any employee with a desire and aptitude to thrive in the hospitality business. As team members join Island Hospitality from other organizations they too can build on that prior experience and find further growth opportunities within our company by utilizing the tools and resources offered. Team Member Wellness Program: How We Thank You For All You Bring To The Team Rewarding Benefits Package: • Healthcare including Medical, Dental, and Vision Insurance, • HSA & FSA plans available!, • Dependent care FSA, • Identity Theft Protection Insurance, • Commuter benefits including transit & parking, • Pet Insurance, • PTO and Payroll Incentives for Annual Wellness Exams, • Employee Assistance Program, • Wellness Subscriptions including access to gyms, financial planning, counseling, and legal services, • Paid Sick and Vacation Time, • Family Leave, • 401(k) Retirement plan - IHM Matches 100% up to 3% of your salary and an extra 50% on the next 2% of your salary. 401(k) is fully vested upon the first contribution Rewarding Hard Work: • Incentive based bonus program, • Free room nights at our hotels and employee discounts within your hotel brand, • Discounts for friends and family within your hotel brand, • Team Member recognition and bonus, • Discounted tickets to theme parks, musicals, movies, and more through Tickets at Work, • Career Growth through our in-house training program with a path personalized to your desired goals, • Referral bonus program to ANY of our locations Equal Opportunity Employer Island Hospitality uses E-Verify to confirm work authorization in all municipalities where it is required by law.

Remote HVAC engineer in the Rockford, IL area needed! This Jobot Job is hosted by: Holly Leahy Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $100,000 - $120,000 per year A bit about us: As a full service consulting engineering firm, we have a vast amount of experience. With this experience, we offer a number of services: Electrical Power, Illumination, Electrical Controls, Primary Electrical Systems, Energy Management Systems, Plumbing, Heating, Ventilation and Air Conditioning. Our Heating, Ventilating, and Air Conditioning Department is available for all types of building options. Our design team provides years of experience. This allows for many design applications to choose from as a solution to your needs. We can design a system that best fits your unique situation. Anything from a split system furnace to a 500 ton absorption chiller. Why join us? Fully Remote except for occasional site services 8AM-5PM but flexible 401K Match at 4% Health insurance on case by case Job Details Job Details: We are currently seeking a dynamic and highly-skilled HVAC Engineer to join our innovative team in the Engineering industry. The successful candidate will be responsible for designing, implementing, and overseeing the installation and maintenance of HVAC systems in both commercial and residential settings. This role requires a dedicated professional with a deep understanding of HVAC systems, project management, and a commitment to providing exceptional service to our clients. If you are a certified PE with a passion for problem-solving and a desire to work in a fast-paced, collaborative environment, we would love to hear from you. Responsibilities: • Design, implement, and oversee the installation and maintenance of HVAC systems in commercial and residential settings., • Conduct comprehensive assessments of existing HVAC systems and recommend improvements or replacements as necessary., • Collaborate with architects and contractors to ensure the successful integration of HVAC systems in building designs., • Prepare detailed reports and documentation, including designs, project costs, and compliance requirements., • Troubleshoot and resolve HVAC-related issues promptly and professionally., • Stay current with the latest HVAC technologies and industry trends to provide the most effective solutions to our clients., • Bachelor's degree in Mechanical Engineering or a related field., • Professional Engineer (PE) certification is required., • Minimum of 5 years' experience in commercial and residential HVAC engineering., • In-depth knowledge of HVAC systems, including design, installation, and maintenance., • Strong project management skills, with the ability to manage multiple projects simultaneously and deliver on time and on budget., • Proficiency in using industry-standard software for HVAC design and analysis., • Commitment to staying current with the latest HVAC technologies and industry trends. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

The HVAC Field Engineer supports the planning, coordination, and execution of all heating, ventilation, and air conditioning (HVAC) work on construction projects. Coordinate with mechanical subcontractors, architects, engineers, and other trades to resolve design or field issues. Bachelor's degree i

Job DescriptionMulti-discipline engineering firm in business for decades is looking for a Senior Project Mechanical Engineer for their White Plains office! Responsibilities: • Design of HVAC systems for small and large projects for a variety of building types (industrial buildings, schools, firehouses, commercial buildings), • Supervise/coordinate projects with other engineering and architecture departments, • Prepare construction drawings/specifications, • Build/maintain client relationships, • Project leadership including providing technical direction, production and scheduling, quality control and cost proposal preparation, • Assist with business development, • Mentor/train junior staff Requirements: • Bachelor’s degree in mechanical engineering, • 6+ years of HVAC design experience, • 5+ years of project management experience, • Experience working with municipalities and government agencies preferred Salary is commensurate with experience. Successful applicants must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! 517-906-6926

Job Description We are currently hiring a Senior Mechanical Engineer in our Building Engineering division at our Albany, Poughkeepsie, White Plains, or Brooklyn NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Senior Mechanical Engineer will work with clients to provide HVAC, plumbing, and fire protection designs, studies and technical support as required to fulfill project requirements. Typical projects will involve field work, design, and construction administration services. A successful candidate will be able to work well in a team, provide leadership to Jr Engineers, and be capable of developing new business. This position offers the opportunity to transition into a mechanical leadership role for the office. Responsibilities • Supervise mechanical engineering staff to develop concepts, strategies, construction documents and engineering reports for new building renovation projects., • Ability to provide mechanical leadership for both large multi-discipline design projects including HVAC, plumbing, process piping systems and fire protection design., • Interact directly with clients technically by completing analysis of design options, cost benefit comparisons, and communicating results to assist owner in decision making process., • Responsible for directing mechanical project team to meet project goals and maintain quality work product., • Manage the mechanical project financial performance and schedule., • Client and Business Development., • Proposal writing to initiate new business., • Minimum of 10 years of experience with a professional A/E services firm is preferred, • Bachelor’s degree in Mechanical Engineering is preferred, • Strong writing, organizational and communications skills, • Ability to work under pressure, and multi-task efficiently Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description Position Overview: The Hudson Clean Heat Applications Engineer will be responsible for the design, coordination, and implementation of mechanical, electrical, and plumbing systems for commercial, industrial, and institutional projects utilizing the latest in water source heat pump technology and any other non-carbon based heating and cooling technology. This role requires applied engineering experience in MEP disciplines and collaboration with multidisciplinary teams to ensure effective project delivery. The engineer will support the Sales Team in design development, construction documentation, and the Project Management team in the project execution, ensuring compliance with applicable codes, standards, and project specifications while meeting the project timelines and cost targets. Key Responsibilities: • Design & Engineering Development, • Prepare detailed design layouts, calculations, and specifications for heat pump, electrical, and plumbing systems., • Perform equipment selection and sizing, load calculations, and energy analysis., • Review and apply relevant building codes, standards (ASHRAE, NFPA, NEC, IPC), and regulatory requirements., • Develop schematic designs and support design development and construction documents., • Project Coordination, • Collaborate with the Sales Team on the pre-sale engineering characteristics of projects., • Collaborate with architects, structural engineers, contractors, and other disciplines to ensure integrated design solutions., • Coordinate MEP systems across project teams to resolve conflicts and design issues., • Support the project manager in preparing design packages for client review and approval., • Participate in project meetings and communicate engineering concepts to both technical and non-technical stakeholders., • Construction & Implementation Support, • Review submittals, shop drawings, and Requests for Information (RFIs) during the construction phase., • Together with the Project Manager, conduct site visits and inspections to monitor compliance with design intent and installation quality., • Assist in commissioning support and functional performance testing of MEP systems., • Technical Documentation & Reporting, • Prepare engineering reports, technical specifications, basis of design documents, and other project deliverables., • Maintain accurate documentation throughout the project lifecycle, including design revisions and field observations., • Participate in value engineering exercises and support lifecycle cost analysis., • Compliance & Safety, • Ensure that all designs comply with environmental, health, and safety regulations., • Incorporate sustainable design principles and energy efficiency best practices where applicable., • Continuous Improvement & Professional Development, • Stay current with technological advancements, industry best practices, and code changes in MEP disciplines., • Bachelor’s degree in mechanical, Electrical, or Architectural Engineering, or related field., • Approximately 3-5 years of experience in MEP design and engineering., • Proficiency in design software (AutoCAD MEP, Revit, and/or similar BIM tools)., • Familiarity with energy modeling software and calculation tools is preferred., • Strong understanding of construction processes and building systems integration., • Effective communication and coordination skills. Join our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining the 2Hudson family of companies, Miller Proctor Nickolas, Inc, Mobile Steam Boiler Rental Corp., and Hudson Clean Heat, you're more than an employee, you're an Employee Owner. 2Hudson is the most recognized heating solutions company in the NYC metro area. Don't miss this chance to become one of our employee owner family members.Miller Proctor Nickolas, Inc. is the only authorized Cleaver Brooks boiler parts, service and sales agent in the NYC Metro, Westchester, surrounding counties and Long Island area. We specialize in the best produced boilers in the industry with the highest trained service technicians. Our staff has been with us an average of 20 years. Because of the dedication, enjoyment in their work, and job satisfaction, openings like this seldom come along. The work atmosphere is informal and comfortable, and the HVAC industry is constantly growing. \r\n\r\nJoin our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining the 2Hudson family of companies, Miller Proctor Nickolas, Inc, Mobile Steam Boiler Rental Corp., and Hudson Clean Heat, you're more than an employee, you're an Employee Owner. 2Hudson is the most recognized heating solutions company in the NYC metro area. Don't miss this chance to become one of our employee owner family members.

Job Description Job Summary We are seeking an experienced Mechanical Engineer to work on the owner's side for a top pharmaceutical company in Westchester, NY. The Mechanical Engineer will be responsible for overseeing electrical design, construction, and delivery of construction projects on a multi-billion dollar expansion program. Job Duties and Responsibilities • Assists the Project Management team in developing the budget and schedule for design and construction projects, including renovations and green field projects., • Works closely with Project Management, Engineering, Space Planning, EHS, Operations, and User teams to fully and rigorously document the MEP/FP and related requirements in the Owner’s Project Requirements document., • Performs preliminary due diligence explorations of existing MEP/FP systems during project initiation to identify any potential risks to the project and any opportunities for improving the building systems of existing buildings., • Assists the Project Manager and Procurement in the development of scopes of work for design professionals, construction managers, general contractors and commissioning agent RFPs. Assist in the evaluation and bid leveling of proposals., • Participates in regular project meetings., • Works directly with hired MEP engineers, consultants, and contractors to answer questions, resolve issues and develop solutions., • Provides supervision for all stages of the development and documentation of mechanical requirements for lab and other equipment for the project. Collaborates with the Project Management team, inhouse engineers, end users, the Asset Management team, EHS, design professionals, lab equipment vendors, design professionals and contractors to ensure that all mechanical system requirements for the equipment are met., • Provides detailed reviews of and comments on due diligence reports, test fits, Basis of Design documents, room data sheets, construction documents and specifications prepared by the design professionals, checking for thoroughness, accuracy and compliance with the project requirements and inhouse design and documentation standards and minimize errors and omissions., • Identifies long lead time equipment for potential Early Works purchasing by the contractor, • Works with the Project Managers, Design Professionals and Contractors to find solutions to mitigate costs and schedule delays due to errors and omissions in the design documents and unforeseeable field conditions, • Reviews shop drawings and submittals, RFI responses, and Change Orders, • Makes frequent site visits to ensure that mechanical requirements are being implemented correctly during construction and creates field reports., • Reviews Design Professional punch lists, • Manages commissioning, auditing, & validating facilities systems for Capital Projects., • Assists the Asset Management and Operations team in preparing equipment lists for import to the inhouse Integrated Workplace Management System, • Coaches and Mentors other members of engineering staff and supervises day to day operation of MEP systems., • Interacts with municipalities to obtain building permits and inspections., • Bachelor’s Degree in Mechanical Engineering or related field, • 5 - 20 years of MEP & HVAC experience (preferably within Pharma, Bio- Pharma, Life Science, Healthcare, or related industry), • New York State Professional Engineering License (PE) preferred, NOT-required, • Excellent communication skills, both written and verbal., • Excellent organizational skills., • Excellent judgment and decision-making skills., • Ability to manage numerous tasks/projects simultaneously. Company Overview IslandSearch Group, Inc., D/B/A ISG Consultants, is an architecture, engineering, construction and environmental consulting and staff augmentation firm that was established in 2018. As a certified MBE and SBE firm, we have over 28 years of experience providing professional staff in support of programs and projects within the public and private sectors in the Tri-State area. Please apply directly to if you have an interest in exploring this opportunity. IslandSearch Group, Inc. D/B/A ISG Consultants is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, creed, religion, national origin, ancestry, marital status, sex, affectional or sexual orientation, gender identity or expression, or protected veteran status; and will not be discriminated against based on disability.

Job Description Hazen and Sawyer is seeking an Engineer for our HVAC/Plumbing/Fire Protection (H-P-F) group in New York City, White Plains, or Hicksville offices. As part of our HVAC/Plumbing/Fire Protection (H-P-F) teams the ideal candidate will work within Hazen and Sawyer’s H-P-F Discipline Group and can expect to work closely with experienced Engineers to perform system designs. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK. Workload will focus on municipal water and wastewater projects including planning, preliminary and final designs, and providing engineering services for projects in construction. It is preferable to have experience in the H-P-F systems related to water and wastewater facilities, although relevant experience in municipal, industrial or commercial buildings and facilities is acceptable. The candidate should enjoy learning and working within a team environment. Required Qualifications: • Bachelors of Science degree in Mechanical Engineering is preferred., • Ability to communicate well both orally and in writing., • Two (2) – twenty five (25) years of experience in designing heating, ventilating, cooling, plumbing, and/or fire protection systems (design for municipal, commercial, or industrial facilities is preferred)., • A PE license, or plans of obtaining their PE license, is preferred., • Experience with Revit is preferred., • Relevant areas of experience include:, • Application of various types of heating, ventilation, air conditioning, and hydronic piping systems, • Ductwork sizing and design, • Heating and cooling load calculations, • Hot water boiler and chilled water system design, • HVAC controls systems and building/facility management systems, • ASME B31.1 Power Piping or ASME B3.9 Building Services Piping designs, • International Mechanical Code, Plumbing Code and Fire Code, • Performance of detailed HVAC and hydraulic pressure drop calculations, • Performance of Plumbing pipe sizing and fixture count analysis, • SMANCA Duct Construction Standards, • NFPA 13, Standard for the Installation of Sprinkler Systems, • NFPA 820, Standard for Fire Protection in Waste Treatment and Collection Facilities What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job DescriptionMulti-discipline engineering firm in business for decades is looking for an Electrical Discipline Engineer for their White Plains office! Job Responsibilities: • Design electrical systems such as lighting, power distribution, stand-by power generation, communication, fire alarm and security systems, • Manage a group of Electrical Engineers in project design and development tasks such as drawings, calculations, cost estimates, and specifications, • Respond to client questions and comments, • Review contractor submittals and provide clarifications during construction, • Review electrical department design documents for completion, • Ensure department personnel adhere to accepted industry and company standards, • Assist in the development of company quality standards and procedures, • Work closely with management and electrical department leadership to develop and implement electrical short- and long-range manpower and production plans to meet project objectives, • Assist in business development initiatives to pursue new projects including participation in client presentations Requirements: • BS in Electrical Engineering from an accredited program, • 10+ years’ experience with a consulting engineering firm designing building power, communication systems, lighting, and security systems, • Extensive knowledge of the architectural and engineering industry, including the Federal, State, and local laws and regulations that pertain to the industry, • P.E. license, • LEED Accreditation, • Knowledge of AutoCAD, EasyPower, and Revit desired, • Supervisory experience, • Experience with HVAC and plumbing systems a plus Salary is commensurate with experience. Successful applicant must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! 517-906-6926

Job Description HVAC Controls Engineer - White Plains, NY Our client is a Leading Engineering Design and Commissioning Company that has a national footprint and specializes in MEP critical facilities design. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. The ideal candidate will have previous experience with the design, construction, integration, and commissioning of Controls and Building Automation Systems (BAS systems) as it pertains to Mechanical / HVAC equipment design in a data center environment. The candidate shall have the expertise to lead the design of new systems and make upgrades to existing automation systems for HVAC and critical cooling systems in the mission-critical environment. The candidate may need to assist in complete startup, commissioning, and validation procedures of these systems. The candidate will need to collaborate with the Electrical and Mechanical Engineering teams, for design sequences, powering of equipment, etc. Responsibilities: • Execute and lead automation design teams of complex scope, and coordinate activities with other disciplines as needed, • Mentor mechanical engineers and assist with training on controls design and development., • Design and implement front end platforms for HVAC controls., • Develop and improve configuration, programming, networking, and diagnostic standards, • Engineer and Implement programming, • Lead creation of modification of programming logic to meet sequence of operations / SOO / Methods of Procedures / MOPs, • Design control, monitoring and systems integration of HVAC / mechanical equipment / systems, • Maintain and deploy updated versions of applications for existing control systems with minimal supervision, autonomous in day-to-day work with being given high level instruction on projects or assignments, • Work with leading edge automation systems from large scale controls vendors;, • Lead development design and continuous improvement of configuration, programming, networking, and diagnostic standards;, • Lead design of controls for centralized chilled water plans condenser water plants, etc., • Review engineered shop drawings and submittals - sequence of operations, installation drawings and point lists, • Participate in building automation focused design reviews, • Assist in the design, configuration, programming, and diagnostics / troubleshooting of BAS networks, • Understand IT / OT interface requirements including routers, switches and network addressing, • Assess, recommend, and implement industry best practices into new and existing Critical Environment Programs, • Develop process documentation and training materials, • Communicate regularly with internal and external stakeholders, subcontractors, project managers, AEs, Controls vendors, GC's and commissioning agents on project progress, • BA / BS in Engineering or relevant degree a Huge Plus, • Licensed PE / EIT / Certifications a Plus, • Data Center Engineering experience with Automation and Controls Experience, • Experience integrating PLC / ALC with complex data center / mission critical facilities, • 5-10 + years with BMS / BCM / BAS Systems (Building monitoring systems / building control systems / Building Automation Systems, • Previous experience working on Controls Products from companies such as: Johnson Controls / JCI; Siemens; Automated Logic; Honeywell; GE Control Systems; Schneider Electric, • Ability to read and audit one-lines / blueprints / CAD drawings and controls diagrams, • PLC / ALC Programming Experience, • Experience with Controls systems design as it relates to: Critical HVAC equipment (Chillers, Air Handlers, CRAC / CRAH units, Boilers, etc.), • Experience working with common BAS protocols BACnet IP, BACnet MSTP, Modbus RTU, Modbus TCP, etc., • Skilled at reviewing design drawings and equipment submittals, • Client facing experience and at times serve as primary point of client contact on various projects, • Ability to successfully work independently; Self Starter and should prioritize well, • Effective communicator - both oral and written form (tech and non-tech), • Proactive, resourceful, delegator and a multitasker, • Exceptional organizational skills with an attention to detail, • Skilled in completing assignments accurately and in a timely manner, • MS Office Suite (Excel, Word, Outlook, PowerPoint, Teams), • Superior analytical, planning and problem resolution skills, • Must be able to provide necessary pro-active recommendations to clients, • Knowledge of general computer hardware & software applications After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Mechanical Engineer - Elmsford, NY Our client is a Engineering Design and Commissioning Company that has a national footprint and specializes in MEP critical facilities design. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. The ideal candidate will have past experience designing commercial HVAC mechanical systems specifically for cooling mission critical data center computer rooms. They will have experience with heating and cooling load calculations, ductwork and piping sizing, selecting HVAC equipment, energy modeling and other engineering calculations. Responsibilities: • Create designs and plans, provided and gather specifications, and execute assignments in a multidisciplinary mechanical engineering design role for complex facility design projects, • Create Conceptual Designs gathered from meeting with the client, • Oversee Commissioning Process as needed, • Work with Business Development Team to respond to RFPs as needed, • 5-10 years experience designing data center cooling systems, • PE or EIT a plus, • LEED a plus, • Bachelor's Degree in Mechanical Engineering or Equivalent, • Experience with Mechanical Systems ( HVAC , CFD ( Fluid Dynamics ), Boilers , Chillers , Pumps , CRAC / CRAH Units , Air Handling Units , etc. ), • Equipment sizing and calculations, • Experience reviewing work in REVIT; Trane Trace or IES VE Energy Modeling software a plus, • Familiar with the design process of building systems for mission critical projects or healthcare / hospital required, • Effective Communicator – emails, phone and face to face., • Ability to work independently After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Please note; this role is based in Mount Vernon! Job Summary Miller Proctor Nickolas (MPN) is a premier leader in the industrial boiler market. We are seeking a high-caliber Technical Sales Engineer to drive our Aftermarket Parts and Service division. This is not a "catalog sales" role; it is a complex, solutions-based position requiring a BS in Engineering and the ability to design sophisticated service solutions that go beyond the client’s initial request. You will act as the technical bridge between our field technicians and our clients, turning on-site challenges into comprehensive service upgrades and repair contracts. If you are a self-starter who thrives on technical problem-solving, value-based selling, and managing high-stakes industrial accounts, you belong at MPN. Key Responsibilities • Technical Solution Design: Evaluate field service opportunities and design complex mechanical/electrical service solutions. You must be able to read mechanical drawings and wiring diagrams to quote accurate repairs and upgrades., • Rapid Response Quoting: Support our field technicians and boiler cleaning teams by providing rapid, manufacturer-authorized quotes while they are on-site., • Value-Based Selling: Navigate long-term sales cycles by focusing on the "Total Cost of Ownership," ensuring clients understand the value of a premium MPN solution., • Account & Contract Management: Prospect new clients and manage existing accounts, including the negotiation of complex service contracts and maintenance agreements., • Full-Cycle Ownership: From receiving the lead to placing the PO with suppliers and coordinating with the Service Scheduling team, you own the project’s administrative and financial integrity., • Project Handoff: Identify and forward new boiler sales opportunities to the capital equipment team while coordinating larger projects with internal Project Management. Qualifications • Education: BS Degree in Engineering or Engineering Technology is required., • Experience: Minimum of 2 years in industrial technical sales. Prior experience with boiler systems or aftermarket industrial products is highly preferred., • Technical Literacy: Proven ability to interpret mechanical drawings, electrical wiring, and technical specifications., • Systems Proficiency: Strong experience with CRM platforms (HubSpot preferred) and MS Office (Excel/Word)., • Financial Acumen: Experience in industrial estimating, billing, and protecting profit margins, • Soft Skills: Customer-centric problem solver, excellent time-management, and the ability to work independently with no handholding. Why Join Miller Proctor Nickolas? • Reputation: Represent a manufacture’s authorized leader in the boiler industry., • Autonomy: Manage your own territory and accounts with the backing of a world-class field service team., • Compensation: Competitive base salary plus a commission structure designed for high-achievers., • Stability: Work in a critical industrial sector with a company known for excellence since 1957.Company DescriptionMiller Proctor Nickolas, Inc. is the only authorized Cleaver Brooks boiler parts, service and sales agent in the NYC Metro, Westchester, surrounding counties and Long Island area. We specialize in the best produced boilers in the industry with the highest trained service technicians. Our staff has been with us an average of 20 years. Because of the dedication, enjoyment in their work, and job satisfaction, openings like this seldom come along. The work atmosphere is informal and comfortable, and the HVAC industry is constantly growing. Join our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining the 2Hudson family of companies, Miller Proctor Nickolas, Inc, Mobile Steam Boiler Rental Corp., and Hudson Clean Heat, you're more than an employee, you're an Employee Owner. 2Hudson is the most recognized heating solutions company in the NYC metro area. Don't miss this chance to become one of our employee owner family members.Miller Proctor Nickolas, Inc. is the only authorized Cleaver Brooks boiler parts, service and sales agent in the NYC Metro, Westchester, surrounding counties and Long Island area. We specialize in the best produced boilers in the industry with the highest trained service technicians. Our staff has been with us an average of 20 years. Because of the dedication, enjoyment in their work, and job satisfaction, openings like this seldom come along. The work atmosphere is informal and comfortable, and the HVAC industry is constantly growing. \r\n\r\nJoin our team not for a job, but for a career and as an owner of the company! We are an employee owned company (ESOP) and you become an Employee Owner after just one year earning shares in the company. ESOPs are the largest creator of middle class wealth in the USA. When joining the 2Hudson family of companies, Miller Proctor Nickolas, Inc, Mobile Steam Boiler Rental Corp., and Hudson Clean Heat, you're more than an employee, you're an Employee Owner. 2Hudson is the most recognized heating solutions company in the NYC metro area. Don't miss this chance to become one of our employee owner family members.

Job DescriptionDescription: Job Title: Quality Control Engineer / Quality Specialist Location: Spartanburg, SC or Mount Vernon, NY Company: ICE AIR, LLC and Affiliates (“Ice Air”, the “Company”, “We”) About Us: Ice Air is a manufacturer of innovative HVAC solutions serving the North America market. We are dedicated to providing reliable, quality, energy-efficient equipment for all new construction, replacement and retrofit projects. Position Overview: We are seeking a motivated Quality Control Engineer / Specialist to support the reliability, performance, and continuous improvement of our HVAC products and manufacturing processes. This role will focus on identifying quality issues, performing structured root cause analysis, improving internal processes, and strengthening feedback loops between manufacturing, engineering, service, and customers. The ideal candidate will have experience working in a manufacturing or service-oriented environment and will be comfortable analyzing technical problems, communicating with cross-functional teams, and driving corrective actions that prevent recurring issues. This individual will play an important role in helping build more robust systems and improving the overall customer experience. Key Responsibilities: • Lead Root Cause Corrective Action (RCCA) investigations into internal quality issues, field failures, and customer complaints., • Utilize structured problem-solving tools such as 8D, 5-Why analysis, Fishbone diagrams, Pareto analysis, and FMEA to identify root causes and implement corrective actions., • Analyze service trends, warranty data, and field performance information to identify recurring issues and improvement opportunities., • Work closely with engineering, manufacturing, and service teams to strengthen system reliability and help “bullet-proof” HVAC equipment performance in the field., • Develop and maintain quality control processes, inspection standards, and documentation to ensure consistent production quality., • Partner with manufacturing teams to identify process weaknesses and implement improvements that reduce defects and variability., • Monitor quality performance indicators including defect rates, warranty trends, service call data, and customer feedback., • Support containment activities and corrective action implementation when quality issues arise., • Communicate clearly with both technical teams and leadership, ensuring issues and solutions are understood across the organization., • Assist with customer communication when necessary to explain findings, corrective actions, and improvement plans., • Support new product introductions by validating quality processes and production readiness., • Competitive salary, bonus, and benefits package., • Significant long-term growth opportunity., • Bachelor’s degree in engineering, Industrial Engineering, Mechanical Engineering, Quality Engineering, or related technical field preferred., • 2–4 years of experience in quality engineering, manufacturing, service engineering, or related technical roles., • Hands-on experience performing root cause analysis and implementing corrective actions., • Strong analytical and data interpretation skills with the ability to identify trends and improvement opportunities., • Ability to work effectively across multiple departments including operations, engineering, service, and leadership teams., • Strong written and verbal communication skills., • Proficiency with standard business tools including Excel, Word, and PowerPoint. Preferred Qualifications • Experience with HVAC systems, refrigeration systems, or electro-mechanical assemblies strongly preferred., • Experience working with service teams or customer feedback loops is a plus., • Experience with HVAC equipment such as PTAC units, packaged systems, or commercial HVAC products., • Familiarity with manufacturing quality systems, continuous improvement methodologies, or Lean/Six Sigma environments., • Experience performing failure analysis or reliability investigations., • Ability to help build structured processes that prevent issues rather than simply reacting to them. Personal Attributes • Strong problem-solver with a curiosity for understanding technical failures., • Comfortable working in a fast-paced manufacturing environment., • Ability to communicate effectively across all levels of the organization., • Collaborative mindset with the ability to influence teams and drive improvements., • Focused on building durable systems, strong processes, and long-term quality improvements.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Job Title: Salesforce Project Manager.Location: NY/NJ (Hybrid – 3 days/week).Seeking a Senior Project Manager to lead Salesforce B2B delivery projects, managing end-to-end execution, stakeholders, and cross-functional teams.Manage multiple Salesforce projects (scope, timeline, budget).Drive projec

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

As an associate engineer, you will be responsible for your own cognizant components, systems and area but will be supported by a team including more experienced engineers and advisors. Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in a related

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Develops project schedules and establishes funding levels based on engineered work scopes. Primary interface with all stakeholders including internal and external customers, project engineering, executive management, subcontractors, and vendors. We rely on the dedication and innovation of our nearly

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Preferred Skills PMP Certification Primavera P6 Experience Familiar with Construction Work Scopes Familiar with Engineering Concepts Compensation and Benefits Health, Dental, Vision & Voluntary Benefits Disability, Life & Accident Insurance 401(k) Savings program & Capital Accumulation Plan Personal

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Looking for a lifetime career? Apply today! Job Description The Knolls Laboratory Weight Handling Engineering unit is seeking a Mechanical Engineer to join our Team! This role provides engineering support for maintenance and inspection of cranes, rigging equipment, and other weight handling equipmen

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Island Hospitality Management - - Responsibilities: Perform routine and preventative maintenance on resort facilities; Complete minor repairs to rental homes and facilities; Inspect irrigation systems, playgrounds, pool/spa, and recreational amenities; Maintain resort pool(s) and test chemical leve

National Church Residences - - Responsibilities: Perform routine inspections, preventive maintenance, and necessary repairs; Diagnose and repair HVAC, plumbing, electrical, and mechanical system issues; Maintain interior and exterior common areas, ensuring safety and cleanliness; Complete minor car

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

ImageFIRST - - Responsibilities: Responsible for the installation, maintenance, troubleshooting, and repair of industrial machinery; Perform preventative and predictive maintenance on industrial machinery; Program PLC's; Complete daily maintenance and repair logs; Follow all safety procedures.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Cintas Corporation - - Responsibilities: Repairing, maintaining, installing and troubleshooting industrial equipment, systems and components including washers, dryers, steam tunnels, conveyor systems and boilers; Performing preventive/predictive maintenance; Resolving safety concerns; Performing in

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Chromalloy - - Responsibilities: Assist in troubleshooting, repairing, and maintaining electronic systems, control panels, and electrical components.Learn to read and interpret blueprints, schematics, wiring diagrams, and technical manuals.Support preventive and corrective maintenance activities.Us

Under general supervision, coordinate and conduct general electrical repair work and troubleshooting, perform preventive maintenance, installation services and construction work in accordance with safety standards and fire codes.This position is 3rd shift in a critical data center facility.Performs

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Strong operational experience in HVAC.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

The Maintenance Technician is an entry level position in which you will be an integral part of a fantastic team servicing vehicles.STOP looking for a job and START investing in your career as a Maintenance Technician at Firestone Complete Auto Care! Full and part-time benefits available from day one

An Engineering educational background is an asset.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

The ideal candidate is proficient in the use of diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications to resolve malfunctions and maintain equipment.

The ideal candidate is proficient in the use of diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications to resolve malfunctions and maintain equipment.

At Delta Air Lines, connection is at the heart of everything we do and guides our every action.We strive to welcome and care for all of our customers during their travels with us and aim to deliver an elevated experience.As a Lead Ground Maintenance Technician (GMT) in a stationary role, you will jo