Trabajos industrial construction en Rochester, New YorkCrear alertas

Job Description Job Title: HVAC Service Technician Job Description The HVAC Service Technician installs, maintains, and repairs commercial heating, ventilation, and air conditioning systems in environments such as offices, retail stores, and other business facilities. You will ride along with experienced technicians, assist with repair and maintenance of existing systems, and use basic hand and testing tools to perform entry-level diagnostics while receiving on-the-job training. You will also support installation projects as needed and work from blueprints and schematics to troubleshoot and maintain preexisting HVAC units. Responsibilities • Ride along with experienced technicians to assist with repair and maintenance of commercial HVAC systems., • Use basic hand tools and testing equipment to perform entry-level diagnostics and support on-the-job training., • Support HVAC installation jobs when needed, including assisting with setup, assembly, and system start-up., • Regularly inspect and test HVAC systems to ensure they are functioning properly and safely., • Diagnose and troubleshoot malfunctions in HVAC systems using blueprints, schematics, and testing tools., • Repair or replace faulty parts and components in HVAC systems to restore proper operation., • Perform regular preventative maintenance on HVAC systems to ensure optimal performance and reliability., • Verify that HVAC systems operate efficiently and comply with applicable safety and environmental standards., • Work on commercial and industrial job sites with both new and preexisting HVAC units., • Drive to job sites within approximately 30 miles of the company’s headquarters in the Rochester, NY area., • Participate in an on-call rotation, being available for 24-hour service coverage for one week at a time on a recurring basis. Essential Skills • Hands-on experience with HVAC servicing, including inspection, maintenance, and repair., • Ability to perform troubleshooting on HVAC systems using basic diagnostic tools., • Experience performing preventative maintenance on HVAC equipment., • Understanding of electrical concepts related to HVAC systems and components., • Familiarity with boilers and related mechanical systems., • Knowledge of OSHA safety practices; OSHA 10 certification preferred., • EPA-related knowledge or exposure to environmental and safety standards for HVAC work., • Valid driver’s license and reliable transportation to drive to job sites., • Ability to read and interpret blueprints and schematics for HVAC systems., • Strong service mindset with the ability to work independently in the field., • Willingness to participate in an on-call rotation for after-hours service. Additional Skills & Qualifications • OSHA 10 certification (preferred)., • EPA-related training or certification (preferred)., • Prior experience working on commercial or industrial HVAC systems., • Experience with electrical troubleshooting in HVAC applications., • Familiarity with boilers and preventive maintenance programs., • Interest in ongoing training and schooling related to HVAC, supported by tuition or training reimbursement., • Strong communication skills to interact with customers and team members on job sites., • High level of personal responsibility and accountability in a field-based role. Why Work Here? You join a growing, close-knit team that values attitude and potential, offering significant freedom paired with trust and responsibility. The company provides a car allowance, company uniforms, and all required PPE (except work boots), along with power tools so you can focus on your work rather than your gear. You benefit from comprehensive medical, vision, and dental coverage, plus a 401(k) with a 3% match to support your long-term financial wellbeing. There are clear opportunities for professional growth, including reimbursement for training and schooling and the potential to earn a company vehicle once you move into a direct role. The culture emphasizes development, autonomy, and support, making it a strong environment for building a long-term HVAC career. Work Environment The company operates with the motto "hire for attitude, train for skill," fostering a culture that emphasizes learning, responsibility, and professional growth. The team currently consists of around two dozen employees and is continuing to expand. Technicians drive themselves to job sites and typically work within approximately 30 miles of the headquarters in the Rochester, NY area, with all jobs local and no out-of-town travel required. You will work on commercial and industrial job sites with both new and preexisting HVAC units, using power tools and PPE provided by the company (work boots supplied by the employee). Standard hours are first shift, Monday through Friday, from 7:00 a.m. to 3:30 p.m. with a 30-minute lunch break. Service technicians participate in an on-call rotation, being on call for 24 hours a day for one week (Monday through Sunday) approximately every 5 to 6 weeks, with a bonus provided for each on-call week. The environment offers significant autonomy in the field, balanced by clear expectations and support from a small, collaborative team. Job Type & Location This is a Permanent position based out of Rochester, NY. Pay and Benefits The pay range for this position is $24.00 - $32.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Rochester,NY. Application Deadline This position is anticipated to close on Oct 8, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionKey Responsibilities Manage HVAC construction projects from kickoff to closeout Develop project scopes, timelines, and schedules Coordinate subcontractors, vendors, and procurement activities Review blueprints, schematics, and HVAC technical drawings Supervise site operations and ensure compliance with safety standards Track project progress and provide regular status updates Resolve project issues with clients, engineers, architects, and subcontractors Conduct site inspections for quality control and compliance Handle change orders, documentation, and project closeout processes Maintain budget control and resource allocation throughout the project lifecycle Requirements Proven experience managing HVAC construction projects Strong background in commercial or industrial construction management Ability to read and interpret HVAC blueprints and schematics Experience with site supervision, safety protocols, and quality assurance Strong project scheduling and coordination skills Excellent communication and time management abilities Experience with civil engineering plans or civil site work is a plus Preferred Skills Project planning and scheduling Budget and cost management Vendor and subcontractor coordination Construction site management Problem-solving and leadership skills Benefits Health insurance Paid time off Cell phone reimbursement Fuel discount \nCompany Description Synectics is a leading staffing and workforce solutions company dedicated to connecting exceptional talent with top organizations. We specialize in IT, engineering, finance, healthcare, and professional services recruitment, offering both contract and permanent staffing solutions. With a people-first approach, we focus on understanding the unique needs of our clients and candidates to create long-term, successful matches. Our mission is to empower businesses with the right talent while helping professionals achieve rewarding career opportunities Synectics is a leading staffing and workforce solutions company dedicated to connecting exceptional talent with top organizations. We specialize in IT, engineering, finance, healthcare, and professional services recruitment, offering both contract and permanent staffing solutions. With a people-first approach, we focus on understanding the unique needs of our clients and candidates to create long-term, successful matches. Our mission is to empower businesses with the right talent while helping professionals achieve rewarding career opportunities

Job Description fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife® ultra-filtered milk; Core Power® High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife® nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. The construction of fairlife's manufacturing facility in Webster, NY is underway. This state-of-the-art, 750k sq ft, greenfield plant is expected to be operational in late 2025 and will lay the foundation for fairlife's next phase of growth as the leading dairy nutrition provider. While coupling the industry's latest technologies and fairlife's operational excellence to build this world-class facility, fairlife plans to hire 250 new employees and bring in approximately 5 million lbs. of milk a day, with room to grow over the coming years. shift schedule: 12 Hour Days: This is a night shift position, with hours from 6:00 PM to 6:00 AM. The role follows a rotating 2-2-3 schedule: two days on, two days off, three days on, followed by two days off, two days on, and three days off. Team members will work every other weekend, including Friday, Saturday, and Sunday. job purpose: Operate milk separating equipment in the processing department in a safe and sanitary manner following all GMP's. Operations include receiving/coordination of raw milk, separation, selection of skim milk and cream tanks/silos, running of HTST, monitoring and maintaining process controls of heat exchanger process variables and documenting accurate recordings of process parameters while in operation. Blend and pasteurize for bulk load-out. responsibilities: • Follow all safety, working, and Good Manufacturing Practice (GMP) rules. Keep the work center audit ready., • Report to and follow the direction of Processing Supervisors., • Know proper established start up and shut down procedures., • Maintain and monitor proper process parameters such as pressures, temperatures, flow rates as well as the quality of product being produced., • Know and maintain process specifications., • Properly clean process equipment such as silos, cream storage silos, balance tanks, lines, valves, pumps and heat exchangers., • Clean process equipment such as tanks, lines and separators, which includes, but isn't limited to, hand-cleaning parts, Clean-In-Place (CIP) and Clean-Out-of-Place (COP) operations on a daily basis., • Take accurate samples to monitor Clean-In-Place (CIP) system for chemical concentration., • Take accurate samples of products for QA testing., • Service pumps, valves and heat exchangers to maintain operational state and per routine Preventative Maintenance (PM) schedule., • Responsible for overall system efficiency., • Follow escalation protocol based on production and quality triggers., • Aid in the training of new personnel or upskilling of team members., • Effectively follow proper standard operating procedures (SOP)., • Complete every shift Master Sanitation Schedule (MSS), Centerline (CL), and Clean, Inspect, Lubricate (CIL) tasks on a timely manner and accurately., • Communicate with upstream and downstream processing on any anticipated schedule delays and/or changes skills/qualifications required: • Must work in a safe, efficient manner and follow all safety procedures including the use of safety equipment., • Must have the ability to troubleshoot small problems and be able to discern when issues may require input from levels of authority within the corporation., • Must be willing to ask for assistance when the process is unclear., • A high school diploma or General Education Degree (GED) is required, • High School level verbal and written communication skills., • Basic computational skills required. Simple math reasoning required., • Must be able to operate the equipment effectively after the appropriate break-in period., • Must possess or be able to obtain an Industrial Truck Operator License., • Proficiency in English: Comfortable with both written and verbal communication, including reading and writing. working conditions and physical requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sitting/Standing/Walking/Lifting/Carrying: The operator stands throughout their shift and walks on uneven concrete and tile surfaces. The operator lifts up to 60 pounds on an occasional basis. Two or more employees complete lifts of greater than 100 pounds. Pushing/Pulling/Bending/Stooping: The operator occasionally pushes/pulls a variety of objects which may include empty pallets, and brooms during cleanup activities. The operator will push/pull pipe-fittings during hook up. The operator bends and stoops occasionally throughout the workday, when servicing equipment, picking supplies or waste product off the floor. Squatting/Kneeling/Crawling/Twisting/Turning: The operator may squat when picking up supplies and during cleanup duties, including kneeling on the floor and crawling under equipment. Occasional twisting and turning at the waist while changing dryer lances, or making CIP connections. Climbing/Balancing/Reaching: The operator occasionally climbs approved stairs or ladders. The operator reaches below shoulder level to pick up pipe-fittings from the floor or while servicing product pumps and related equipment. The operator may reach at or above shoulder level when making equipment adjustments, or during cleanup duties. Grasping/Manipulation: Frequent use of the hands and fingers is required of the operator when servicing pumps, using scrub brushes, and connecting pipe-fittings. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties. Employees will be subject to ambient temperatures as well as elevated temperatures, up to 110 degrees, due to equipment operation and cleaning. food safety requirements: • Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety., • Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas., • Perform all duties necessary to meet Company, Customer and/or Government requirements/standards as prioritized by the Company., • Ability to initiate action to prevent the occurrence of nonconformities relating to Food Safety and the Quality of the product, processes, quality system, or safety system., • Identify and record any problems relating to Food Safety and the Quality of the ingredients, processes, quality system, or safety system., • Control further processing or delivery of nonconforming product in terms of Food Safety and Quality issues until the deficiency or unsatisfactory condition has been corrected., • In the event of absence, another employee with the same skill level will assume the duties and responsibilities as required. position location: Webster, NY reports to: Processing Supervisor travel requirements: Little to none exempt/nonexempt: nonexempt fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email careers@fairlife.com. For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.

THIS POSITION IS LOCATED IN ROCHESTER, NY. THE RATE OF PAY IS $120-170K YEARLY. \n \n The Bell Company is a large EMPLOYEE-OWNED Mechanical Contractor that takes on some of the most complex projects in our East Coast Market. This is your chance to become a part of this dynamic team and work towards the mutual success of the project, the company, your co-workers and yourself. \n \n THE OPPORTUNITY: Mechanical Virtual Design Manager (VDM)/BIM Manager \n As a Mechanical Virtual Design Manager (VDM)/BIM Manager with The Bell Company, you will have the opportunity to use your skills to work on hospitals, laboratories, and large industrial projects. Additional information on all our projects can be found on our website: www.thebellcompany.com \n \n PAY RANGE: \n $120-170K/YEAR FOR MECHANICAL VIRTUAL DESIGN MANAGER(VDM)/BIM MANAGER \n \n THE BENEFITS: \n At the Bell Company we believe in rewarding members of our teams with more than just a competitive rate. We also offer: \n\n • Being part of an EMPLOYEE-OWNED COMPANY with the company contributing stock in the anticipated value of 3% to 6% of your gross (ESOP program) as well as an annual bonus program for all employees. Both programs are subject to vesting and/or company performance.\n, • Ongoing professional training and development\n, • Opportunities for advancement\n, • Defined annual bonus program based on Company performance\n, • Employer paid $50,000 life insurance\n, • Elective medical with 75% employer contribution, dental and supplemental benefits are available immediately\n, • 401 (k) program with 3% employer grant\n, • Paid vacation\n, • Paid holidays\n, • Relocation assistance available\n\n \n REPORTS TO: \n\n • Executive, per the Company Organization chart\n\n \n PAYROLL CLASSIFICATION: \n\n • This position is a Salaried Exempt Position (Executive)\n\n \n JOB REQUIREMENTS: \n The ideal candidate for our Virtual Design Manager (VDM)/BIM Manager will have previous experience leading a coordination effort and have hands-on experience in the Mechanical trades. \n KEY SKILLS: \n\n • REVIT, SYSQue and Navisworks\n, • AutoCAD\n, • Field and 3D Coordination\n, • Management\n\n PREREQUISITES: \n\n • 10 years of Experience in the detailed drafting and coordination of complex mechanical projects\n, • Proven ability to schedule on a department level and monitor and maintain the same.\n, • Demonstrated experience with Computer Programs/Systems used in the drafting, coordination, collision verification and fabrication spooling.\n, • Displays leadership capabilities and can supervise BIM Coordinators in the Corporate Office, Regional Offices and remote project locations.\n, • A good understanding of Bell policies and procedures\n, • Ability to read and interpret Contract documents, modeled construction documents and specifications.\n, • Ability to plan and organize activities\n, • Experience is required with equipment typical for Mechanical, HVAC Process Systems, and Advanced Plumbing Systems.\n\n DUTIES: \n\n • Maintain the ethics and professionalism of The Bell Company in the execution of the duties and responsibilities of the position.\n, • Maintain Bell Standards so all projects and systems that we use operate identical to every Bell project.\n, • Monitor Lead Coordinators in Regional offices to assure they are coordinating and supervising all BIM coordinators assigned to the regional office or project sites in the region.\n\n COMMUNICATION \n\n • Provide leadership and vision for the department\n, • Maintain open communications between home office and Bell’s field management staff.\n, • Create a team atmosphere where everyone in the BIM department understands the goals and how their involvement in the project is vital to its success.\n\n BIM SCHEDULE \n\n • Provide projects man hours and durations for schedule development and ensure team wide understanding of the BIM requirements for a project.\n, • Consistently maintain or exceed scheduling expectations\n, • Provide to the project team the plan of the schedule for drawing completion and progress against that plan\n\n RESOURCES \n\n • Supervise all BIM staff for conformance with position descriptions and the Company Policy and Procedures.\n, • Integrate the BIM personnel as part of the dynamic project team.\n, • Assure that all work hours are documented daily and are accurate\n, • Provide BIM personnel support as required by project schedule\n, • Assist in Identifying, recruiting and evaluating BIM candidates for open positions.\n\n TRAINING \n\n • Assure that every individual assigned to a project is adequately trained in all software and procedures.\n, • Provide Training and Supervision of in-house BIM users for all upgrades, program modification and procedure changes.\n, • Secure outside training as required to maintain an industry leading group.\n\n HARDWARE/SOFTWARE \n\n • Maintain optimum BIM Hardware and Software inventory\n, • Negotiate competitive pricing of BIM software purchases and maintenance contracts\n, • Order & maintain plotter supplies\n, • Provide support for plotting and electronic file submissions\n, • Provide technical support for all BIM software\n, • Coordinate with IT to facilitate integration, upgrades and licensing.\n, • Train Coordinators in files set up and support for the Trimble field layout system.\n\n COST CONTROL \n\n • Responsible for developing and then maintaining project BIM cost/budgets\n, • Provide a budget for all BIM technology items\n, • Provide and manage a budget for training with a well-defined scope\n, • Review BIM operator progress on a routine basis to ensure productivity.\n\n QUALITY CONTROL \n\n • Develop and maintain the Revit Family Library\n, • Develop specification and material databases internal to Revit software\n, • Customization of Revit programs to optimize customer requirements and the Bell Company productivity\n, • Develop, implement and enforce Revit/BIM standards\n, • Routinely communicate with the projects about the accuracy of the model and drawings\n\n FILES \n\n • Develop and maintain document control procedures and control of all Revit and Navisworks files\n, • Maintain up-to-date drawing records per Company standards\n, • Organize the Revit/BIM virtual environment\n, • Maintain Revit/BIM document archive and retrieval for projects\n, • Audit and purge Revit files for project closeout\n\n PROJECT CLOSEOUT \n\n • Provide as-built drawings in the format and detail required by the contract documents.\n\n \n ADDITIONAL REQUIREMENTS \n\n • Dedicated, self-motivated with good verbal and people skills.\n, • Demonstrate a stable work history.\n, • Able to prioritize and work independently.\n, • Pass a pre-employment drug screening.\n, • Willing to work all hours and schedules assigned.\n\n \n The Bell Company is an Equal Employment Opportunity Employer. Minorities, Women, Disabled and Veterans are encouraged to apply. \n Our focus marketplace is the Heavy Construction Industry (Mechanical Piping) and PLUMBING \n If you have experience in the following disciplines, we want to hear from you! \n

Job Description Mechanical Assembler Pay Up to $24.00/Hour | 1st Shift | Excellent Benefits | Career Growth Opportunities Why You'll Want to Apply ✅ Earn up to $24.00 per hour based on experience and skill level ✅ Consistent 1st shift schedule: Monday through Friday, 7:00 AM to 3:30 PM ✅ Work-life balance with no mandatory weekend work ✅ Optional overtime available on Saturdays for additional earnings ✅ 120 hours of PTO, 5 sick days, and paid holidays ✅ Health, dental, and vision insurance ✅ 401(k) retirement plan ✅ Opportunities for advancement into specialized assembly and leadership roles ✅ Small-team environment where your contributions are recognized and valued ✅ Stable company with long-term career potential Build Something That Matters Are you mechanically inclined and enjoy working with your hands? We're looking for a Mechanical Assembler to join our growing manufacturing team. In this role, you'll assemble high-quality mechanical components and equipment while working alongside a close-knit team that values craftsmanship, safety, and continuous improvement. If you're seeking a hands-on career with competitive pay, strong benefits, and room to grow, we'd love to meet you. Job Description The Mechanical Assembler plays a key role in assembling mechanical components, subassemblies, and finished products according to technical specifications and quality standards. This position is ideal for individuals who take pride in precision work, enjoy problem-solving, and want to contribute to the success of a collaborative manufacturing team. Responsibilities • Assemble mechanical components, subassemblies, and finished products according to blueprints, schematics, technical drawings, and work instructions., • Operate hand tools, power tools, measuring equipment, and production machinery safely and efficiently., • Read and interpret blueprints, assembly drawings, and specifications to ensure accurate assembly., • Perform quality inspections throughout the assembly process to verify compliance with company and customer standards., • Troubleshoot assembly issues and report defects, malfunctions, or process concerns to supervisors., • Measure and verify dimensions, tolerances, and alignments using tape measures, calipers, and other measuring devices., • Maintain accurate production and assembly records, including quantities completed and issues encountered., • Safely handle, move, and position materials, components, and finished products., • Maintain a clean, organized, and safe work environment while following all company safety procedures., • Collaborate with team members to improve workflow efficiency and meet daily production goals., • Support additional manufacturing and production activities as needed. Required Skills & Experience • Experience in mechanical assembly, manufacturing, production, or a related industrial environment preferred., • Strong mechanical aptitude and ability to work with hand tools and power tools., • Ability to read and interpret blueprints, schematics, and assembly instructions., • Experience using measuring tools to verify dimensions and tolerances., • Strong attention to detail and commitment to producing high-quality work., • Good manual dexterity and hand-eye coordination., • Ability to identify and troubleshoot mechanical assembly issues., • Ability to stand for extended periods and safely lift and move materials as needed., • Strong communication skills and a team-oriented mindset. Preferred Qualifications • High school diploma or GED., • Technical certification in manufacturing, mechanical assembly, maintenance, or a related field is a plus., • Previous experience in a manufacturing or industrial production environment., • Ability to learn new equipment, procedures, and assembly processes quickly., • Strong work ethic, reliability, and commitment to workplace safety. Work Environment This position is based in a small manufacturing facility with approximately 25 employees, creating a collaborative and close-knit team atmosphere. Work is performed on a consistent first-shift schedule, Monday through Friday from 7:00 AM to 3:30 PM, with optional overtime available on Saturdays. The role involves working with hand tools, power tools, measuring devices, and manufacturing equipment in a clean, organized, and safety-focused production environment. Candidates should be comfortable standing for extended periods, performing hands-on assembly work, and lifting or moving materials as part of daily responsibilities. Ready to Build Your Future? Join a company where your skills are valued, your hard work is recognized, and your career can grow. With pay up to $24.00/hour on 1st shift, excellent benefits, advancement opportunities, and a supportive team culture, this is an opportunity you won't want to miss. Apply today! Job Type & Location This is a Permanent position based out of Rochester, NY. Pay and Benefits The pay range for this position is $19.00 - $24.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Rochester,NY. Job Type & Location This is a Permanent position based out of Rochester, NY. Pay and Benefits The pay range for this position is $20.00 - $20.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Rochester,NY. Application Deadline This position is anticipated to close on Oct 7, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description J&B Installations, Inc. is a commercial and industrial roofing contractor specializing in EPDM, PVC, and TPO membranes. We are family owned and operated and have been the leading commercial roofing company in New York State for over 45 years. J&B Installations is located in Skaneateles, NY with jobs located throughout the greater Central New York area. This position is responsible for installing, repairing, and maintaining the roofing systems of commercial buildings such as offices, factories, schools, hospitals and warehouses. Commercial roofers work with various types of roofing materials, including asphalt, metal, and membrane systems, and are skilled in working with both flat and sloped roofs. Essential Job Duties and Responsibilities: (Additional duties may be assigned) • Installation of single ply roof systems such as EPDM, TPO, PVC, • Installation of single ply and BUR roof system details and flashings, • Ability to interpret drawings, and follow written and verbal instructions, • Follow manufacturer specifications during installation, • Flat Insulation and Tapered insulation layout is a plus, • Load, unload, and store materials safely, • Cut and shape roofing materials to fit specified areas, • Abide by all safety protocols and regulations are followed, including proper use of harnesses, scaffolding, and other safety equipment, • Work with fall protection systems, ladders, and lifts to access high areas, • Adhere to OSHA (Occupational Safety and Health Administration) guidelines Requirements Minimum Qualifications: • 2-5 years experience in commercial roofing preferred, • Must have own transportation to and from job sites, • OSHA 10 certification. Can be acquired online, • Must have own hand tools Knowledge, Skills, and Abilities: • Ability to interpret construction blueprints, diagrams, and roofing plans., • Understanding the different types of commercial roofing systems (e.g., TPO, EPDM, PVC, built-up roofing, metal, etc.) and materials used in construction, repair, and maintenance., • Knowledge of OSHA regulations and workplace safety protocols, including fall protection, ladder safety, and equipment handling., • Understanding the proper use of roofing tools (e.g., power tools, hand tools, pneumatic guns) and equipment (e.g., scaffolding, ladders, hoists)., • Basic math skills to calculate areas and measure materials., • Ability to communicate effectively with team members and supervisors, including explaining issues and project updates., • Ability to work collaboratively with a team of other roofers and contractors to complete projects efficiently and safely., • Ability to work in physically demanding conditions, including lifting heavy materials, working at heights, and withstanding hours of outdoor work., • Ability to assess and identify risks associated with roofing work, ensuring safety and quality standards are maintained throughout the project. Benefits Why work for J&B Installations? • Family owned and operated, • Competitive starting pay rate $23.00 - $38.00, depending on experience, • Prevailing wage jobs (Rate varies based on county) $45.00 - 74.25/hr., • Comprehensive Medical Insurance, • 401k retirement plan, • Profit Sharing, • Opportunity for advancement J&B Installations is an equal opportunity employer.

Job Description fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife® ultra-filtered milk; Core Power® High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife® nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. The construction of fairlife's manufacturing facility in Webster, NY is underway. This state-of-the-art, 750k sq ft, greenfield plant is expected to be operational in late 2025 and will lay the foundation for fairlife's next phase of growth as the leading dairy nutrition provider. While coupling the industry's latest technologies and fairlife's operational excellence to build this world-class facility, fairlife plans to hire 250 new employees and bring in approximately 5 million lbs. of milk a day, with room to grow over the coming years. Join Us - Sign-On Bonus Included! shift schedule: 12 Hour Days: This is a day shift position, with hours from 6:00 AM to 6:00 PM. The role follows a rotating 2-2-3 schedule: two days on, two days off, three days on, followed by two days off, two days on, and three days off. Team members will work every other weekend, including Friday, Saturday, and Sunday. job purpose: The Packaging Material Operator is responsible for the organization, storage, and supply of raw materials to filling and packaging equipment via an Industrial Truck for transportation. This position provides preforms that are fed to the blow molder, caps that are directed to the capper, and chemicals for cleaning in or around the filler. They maintain the cleanliness of their drive paths while assisting with operational activities to ensure minimal contributions to downtime. Duties also consist of chemical and material waste removal, including rejected packaging products. responsibilities: • Follow all safety, working, and Good Manufacturing Practices (GMP) rules., • Report to and follow the directions of the Production Supervisors., • Demonstrate the ability to safely operate a variety of forklifts for moving and staging material or material waste., • Be able to clean and sort all used material as part of normal operating procedures in a neat and orderly fashion., • Maintain proper First In First Out (FIFO) rotation of raw materials, inventory, or assigned items., • See that all materials for finished and non-finished goods are properly stored, all the necessary paperwork is comprehensively filled out, and computer documentation has been completed in a timely manner., • Communicate with supervisor and filler operator consistently about inventory availability or any risks associated with upcoming production orders., • Adhere to placement of inventory in designated, labeled locations. Verify all supplies and inventory remain 18" from the walls. Consult management to determine necessary action if proper space is not available., • Ensure packaging infeed areas stay clean, orderly, and clear of debris at all times during or between production. Store materials in an audit ready manner at all times., • Conduct monthly and yearly housekeeping audits, while executing follow up actions to remain in specifications., • Learn how to operate downstream packaging equipment, processing equipment, or palletizing equipment as needed., • Aid in the training of new personnel or upskilling of team members., • Perform other duties as assigned by management. skills/qualifications required: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be provided to enable individuals to perform the essential functions. • A High School diploma or General Education Degree (GED) required., • Strong verbal and written communication skills., • Must be able to coordinate packaging material needs effectively after the appropriate training period., • Must have the ability to troubleshoot small problems and escalate accordingly for those requiring additional expertise., • Must work in a safe, efficient manner while adhering to all safety procedures., • Must possess or be able to obtain an Industrial Truck Operator License., • Ability to handle ambiguity and work in a fast paced, entrepreneurial environment., • Proficiency in English: Comfortable with both written and verbal communication, including reading and writing. working conditions and physical requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Sitting/Standing/Walking/Lifting/Carrying – The Material Handler stands on and operates an industrial truck throughout the majority of their shift, sitting approximately one quarter of the time. The Material Handler walks on uneven concrete and tile surfaces in the packaging or material storage area. They may lift up to 60 pounds on a frequent basis and 80 pounds on an occasional basis. Two or more employees work together for lifts of greater than 80 pounds., • Pushing/Pulling/Bending/Stooping – The Material Handler pushes/pulls filled bags when re-stacking a pallet. They push/pull while using brooms, dust mops, and brushes during cleanup duties. The Material Handler bends/stoops occasionally throughout the workday for varying lengths of time., • Squatting/Kneeling/Crawling/Twisting/Turning – The Material Handler may squat to pick up product from the floor, or during various cleanup duties. There will be occasional twisting and turning at the waist when loading material, or when performing routine responsibilities., • Climbing/Balancing/Reaching – The Material Handler steps on and off the industrial truck and climbs stairs to access material pallets or infeed chutes. The Material Handler reaches below and/or above shoulder level when removing or adding bags to a pallet, loading materials, and dumping unfinished product components., • Grasping/Manipulation – The Material Handler will engage in frequent use of hands and fingers for pressing industrial truck operating buttons, typing on a keyboard, opening material pallets, and cleaning up material waste. food safety requirements: • Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety., • Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas., • Perform all duties necessary to meet Company, Customer, and/or Government requirements and standards as prioritized by the Company., • Ability to initiate action to prevent the occurrence of nonconformities relating to food safety and the quality of the product, processes, quality system, or safety system., • Identify and record any problems relating to food safety and the quality of ingredients, processes, quality system, or safety system., • Control further processing or delivery of nonconforming products in terms of food safety and quality issues until the deficiency or unsatisfactory condition has been corrected., • In the event of an absence, another employee with the same skill level will assume the duties and responsibilities as required. how fairlife nourishes you: At fairlife, we believe in better — and that includes how we support our people. We offer a comprehensive suite of benefits and wellbeing resources designed to support you physically, emotionally, socially, and financially, both in and out of work. • Comprehensive medical, dental, and vision coverage, effective day one!, • Supplemental health plans (hospital indemnity, accident, and critical illness insurance), • Paid Time Off to recharge and support work-life balance, • Paid parental leave & adoption assistance (up to $10,000), • Parental support & family care benefits, including childcare resources and lactation support, • 401(k) to support retirement planning with up to 9% in employer match, • Wellness reimbursement (up to $500 for qualified wellbeing expenses), • Employee Assistance Program (EAP) for emotional wellbeing and work-life support, • Company-paid life insurance and short-term disability, • Employer HSA funding (for HDHP participants), • Tuition reimbursement (up to $10,000) and student loan repayment ($200/month), • Learning & development programs to unlock your full potential, • Rewards & recognition, matching gifts, free product, and Business Resource Groups fairlife's nour!sh program is designed to meet you where you are — supporting your individual wellbeing journey while enabling you to do your best work every day. position location: Webster, NY reports to: Packaging Supervisor travel requirements: little to none exempt/nonexempt: nonexempt This position is bonus eligible. *Base pay offered may vary depending on geography, job-related knowledge, skills, and experience. A full range of medical, financial, and/or other benefits, dependent on the position, is offered. Base pay range: $22—$23 USD fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email careers@fairlife.com. For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.

Job Description Journeyman Electrician – Substation Controls | Rigid Conduit Required | Power Generation Experience Preferred Location: Rochester, NY Pay: $40–$55/hour depending on experience, plus prevailing wage opportunities Employment Type: Full-Time We are seeking an experienced Journeyman Electrician for work supporting industrial electrical and substation projects in the Rochester, NY area. This position focuses on the installation, maintenance, testing, and troubleshooting of electrical control systems within medium-voltage substations and related industrial environments. Rigid conduit experience is required. Experience working in power generation, natural gas power generation, or electrical substations is strongly preferred. • Install, maintain, troubleshoot, and repair substation electrical and control systems, • Install and work with rigid conduit, including bending and threading using both hand and power equipment, • Install and maintain protective relays, SCADA systems, RTUs, control panels, meters, instrumentation, and associated wiring, • Read and interpret electrical schematics, wiring diagrams, blueprints, and technical manuals, • Perform inspections, testing, and calibration of electrical control equipment, • Diagnose electrical and control system malfunctions, • Repair or replace defective equipment and components, • Perform project layout and underground service layout, • Maintain accurate work orders and project documentation, • Follow all OSHA, lockout/tagout, site-specific, and company safety requirements, • Participate in an on-call rotation for emergency response when required, • Assist with coordinating and directing small crews as needed Required Qualifications • Journeyman-level electrical experience, • Strong rigid conduit experience is required, • Experience with conduit bending and threading using hand and power equipment, • Ability to read blueprints, schematics, and electrical drawings, • Mechanical aptitude and project layout experience, • Experience with electrical building services and underground services, • Basic computer skills, • Strong communication and teamwork skills, • Ability to plan work, prioritize tasks, troubleshoot problems, and work within project schedules, • Ability to safely lift, push, or pull up to 50 pounds Preferred Experience • Electrical substation construction or maintenance, • Power generation facilities, • Natural gas power generation facilities, • Medium-voltage electrical systems, • Substation controls, protective relays, SCADA, RTUs, and control wiring, • Leading or managing a small electrical crew Any offer of employment is contingent upon successfully completing required pre-employment screening, which may include a DOT physical, drug screening, background check, and driver's license check. This is a full-time, non-management position.

Job Description fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife® ultra-filtered milk; Core Power® High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife® nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. The construction of fairlife's manufacturing facility in Webster, NY is underway. This state-of-the-art, 750k sq ft, greenfield plant is expected to be operational in late 2025 and will lay the foundation for fairlife's next phase of growth as the leading dairy nutrition provider. While coupling the industry's latest technologies and fairlife's operational excellence to build this world-class facility, fairlife plans to hire 250 new employees and bring in approximately 5 million lbs. of milk a day, with room to grow over the coming years. Join Us - Sign-On Bonus Included! shift schedule: 12 Hour Nights: This is a night shift position, with hours from 6:00 PM to 6:00 AM. The role follows a rotating 2-2-3 schedule: two days on, two days off, three days on, followed by two days off, two days on, and three days off. Team members will work every other weekend, including Friday, Saturday, and Sunday. Shift Differential of $2 per hour for night shift. job purpose: The Packaging Material Operator is responsible for the organization, storage, and supply of raw materials to filling and packaging equipment via an Industrial Truck for transportation. This position provides preforms that are fed to the blow molder, caps that are directed to the capper, and chemicals for cleaning in or around the filler. They maintain the cleanliness of their drive paths while assisting with operational activities to ensure minimal contributions to downtime. Duties also consist of chemical and material waste removal, including rejected packaging products. responsibilities: • Follow all safety, working, and Good Manufacturing Practices (GMP) rules., • Report to and follow the directions of the Production Supervisors., • Demonstrate the ability to safely operate a variety of forklifts for moving and staging material or material waste., • Be able to clean and sort all used material as part of normal operating procedures in a neat and orderly fashion., • Maintain proper First In First Out (FIFO) rotation of raw materials, inventory, or assigned items., • See that all materials for finished and non-finished goods are properly stored, all the necessary paperwork is comprehensively filled out, and computer documentation has been completed in a timely manner., • Communicate with supervisor and filler operator consistently about inventory availability or any risks associated with upcoming production orders., • Adhere to placement of inventory in designated, labeled locations. Verify all supplies and inventory remain 18" from the walls. Consult management to determine necessary action if proper space is not available., • Ensure packaging infeed areas stay clean, orderly, and clear of debris at all times during or between production. Store materials in an audit ready manner at all times., • Conduct monthly and yearly housekeeping audits, while executing follow up actions to remain in specifications., • Learn how to operate downstream packaging equipment, processing equipment, or palletizing equipment as needed., • Aid in the training of new personnel or upskilling of team members., • Perform other duties as assigned by management. skills/qualifications required: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be provided to enable individuals to perform the essential functions. • A High School diploma or General Education Degree (GED) required., • Strong verbal and written communication skills., • Must be able to coordinate packaging material needs effectively after the appropriate training period., • Must have the ability to troubleshoot small problems and escalate accordingly for those requiring additional expertise., • Must work in a safe, efficient manner while adhering to all safety procedures., • Must possess or be able to obtain an Industrial Truck Operator License., • Ability to handle ambiguity and work in a fast paced, entrepreneurial environment., • Proficiency in English: Comfortable with both written and verbal communication, including reading and writing. working conditions and physical requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Sitting/Standing/Walking/Lifting/Carrying – The Material Handler stands on and operates an industrial truck throughout the majority of their shift, sitting approximately one quarter of the time. The Material Handler walks on uneven concrete and tile surfaces in the packaging or material storage area. They may lift up to 60 pounds on a frequent basis and 80 pounds on an occasional basis. Two or more employees work together for lifts of greater than 80 pounds., • Pushing/Pulling/Bending/Stooping – The Material Handler pushes/pulls filled bags when re-stacking a pallet. They push/pull while using brooms, dust mops, and brushes during cleanup duties. The Material Handler bends/stoops occasionally throughout the workday for varying lengths of time., • Squatting/Kneeling/Crawling/Twisting/Turning – The Material Handler may squat to pick up product from the floor, or during various cleanup duties. There will be occasional twisting and turning at the waist when loading material, or when performing routine responsibilities., • Climbing/Balancing/Reaching – The Material Handler steps on and off the industrial truck and climbs stairs to access material pallets or infeed chutes. The Material Handler reaches below and/or above shoulder level when removing or adding bags to a pallet, loading materials, and dumping unfinished product components., • Grasping/Manipulation – The Material Handler will engage in frequent use of hands and fingers for pressing industrial truck operating buttons, typing on a keyboard, opening material pallets, and cleaning up material waste. food safety requirements: • Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety., • Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas., • Perform all duties necessary to meet Company, Customer, and/or Government requirements and standards as prioritized by the Company., • Ability to initiate action to prevent the occurrence of nonconformities relating to food safety and the quality of the product, processes, quality system, or safety system., • Identify and record any problems relating to food safety and the quality of ingredients, processes, quality system, or safety system., • Control further processing or delivery of nonconforming products in terms of food safety and quality issues until the deficiency or unsatisfactory condition has been corrected., • In the event of an absence, another employee with the same skill level will assume the duties and responsibilities as required. how fairlife nourishes you: At fairlife, we believe in better — and that includes how we support our people. We offer a comprehensive suite of benefits and wellbeing resources designed to support you physically, emotionally, socially, and financially, both in and out of work. • Comprehensive medical, dental, and vision coverage, effective day one!, • Supplemental health plans (hospital indemnity, accident, and critical illness insurance), • Paid Time Off to recharge and support work-life balance, • Paid parental leave & adoption assistance (up to $10,000), • Parental support & family care benefits, including childcare resources and lactation support, • 401(k) to support retirement planning with up to 9% in employer match, • Wellness reimbursement (up to $500 for qualified wellbeing expenses), • Employee Assistance Program (EAP) for emotional wellbeing and work-life support, • Company-paid life insurance and short-term disability, • Employer HSA funding (for HDHP participants), • Tuition reimbursement (up to $10,000) and student loan repayment ($200/month), • Learning & development programs to unlock your full potential, • Rewards & recognition, matching gifts, free product, and Business Resource Groups fairlife's nour!sh program is designed to meet you where you are — supporting your individual wellbeing journey while enabling you to do your best work every day. position location: Webster, NY reports to: Packaging Supervisor travel requirements: little to none exempt/nonexempt: nonexempt This position is bonus eligible. *Base pay offered may vary depending on geography, job-related knowledge, skills, and experience. A full range of medical, financial, and/or other benefits, dependent on the position, is offered. Base pay range: $22—$23 USD fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email careers@fairlife.com. For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.

Job Description fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife® ultra-filtered milk; Core Power® High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife® nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. The construction of fairlife's manufacturing facility in Webster, NY is underway. This state-of-the-art, 750k sq ft, greenfield plant is expected to be operational in late 2025 and will lay the foundation for fairlife's next phase of growth as the leading dairy nutrition provider. While coupling the industry's latest technologies and fairlife's operational excellence to build this world-class facility, fairlife plans to hire 250 new employees and bring in approximately 5 million lbs. of milk a day, with room to grow over the coming years. Join Us - Sign-On Bonus Included! shift schedule: 12 Hour Days: This is a day shift position, with hours from 6:00 AM to 6:00PM. The role follows a rotating 2-2-3 schedule: two days on, two days off, three days on, followed by two days off, two days on, and three days off. Team members will work every other weekend, including Friday, Saturday, and Sunday. .job purpose: The Packaging Operator operates, sets up, changes over, troubleshoots, and cleans either sleeving, case packing, or palletizing equipment. This position ensures the manufactured products meet specifications, makes minor adjustments as necessary, clears any jams that may occur, and prepares the equipment for cleaning. They continuously feed various materials into the machines such as sleeves, corrugate, shrink film, glue, pallets, and stretch wrap. They adhere to food processing requirements verified by routine quality checks and maintain food safe practices for the entire duration of operation. responsibilities: • Follow all safety, working, and Good Manufacturing Practices (GMP) rules., • Report to and follow the directions of the Production Supervisors., • Demonstrate the ability to safely operate moving equipment and make the appropriate adjustments within process limits in order to package accurate and defect-free cases with sleeved bottles., • Observe machine operations to ensure quality conformity to specifications and standard operating procedures for all packaged products., • Inspect packaged product throughout the process including filled bottles, sleeved bottles, formed cases, shrink wrapped cases, and full pallets to verify all meet finished specifications then adjust the process as needed while escalating issues to a supervisor., • Supply packaging equipment with materials such as sleeves, corrugate, shrink film, glue, pallets, and stretch wrap., • Periodically count and record all finished or rejected materials., • Clean the packaging equipment, ancillary tools, conveyors, and surrounding areas. Maintain the entire packaging line in audit ready condition both during and after production., • Proactively monitor the production line, packaging equipment, and surrounding conveyors to watch for any problems including backups, jams, or rejects. Efficiently resolve stoppages and continue production in a timely manner while recording all downtime reasons., • Stop and address machines when faults occur, clear machine jams, then report malfunctions to the appropriate supervisor and/or technician., • Troubleshoot problems, perform minor repairs using the correct tools, and participate in Preventive Maintenance on the packaging equipment., • Demonstrate proactive monitoring skills, using visual observation of gauges and listening to mechanical sounds to ensure equipment is functioning properly. Inform maintenance of suspected issues if unable to correct., • Aid in the training of new personnel or upskilling of team members., • Perform other duties as assigned by management. skills/qualifications required: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be provided to enable individuals to perform the essential functions. • A High School diploma or General Education Degree (GED) required., • Strong verbal and written communication skills., • Basic computational skills including simple math and reasoning required., • Must be able to operate the equipment effectively after the appropriate training period., • Must have the ability to troubleshoot small problems and escalate accordingly for those requiring additional expertise., • Must work in a safe, efficient manner while adhering to all safety procedures., • Must possess or be able to obtain an Industrial Truck Operator License., • Ability to handle ambiguity and work in a fast paced, entrepreneurial environment., • Proficiency in English: Comfortable with both written and verbal communication, including reading and writing. working conditions and physical requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Sitting/Standing/Walking/Lifting/Carrying – The Packaging Operator stands throughout their shift and walks on uneven concrete or tile surfaces. They lift full packaged cases to conduct routine checks and load material onto the equipment infeed areas., • Pushing/Pulling/Bending/Stooping – The Packaging Operator pushes/pulls rolls of labels onto sleever and stacks collapsed boxes on a pallet or places into a recycling container. The Packaging Operator pushes/pulls while using brooms, dust mops, and brushes during cleanup duties. The Packaging Operator bends/stoops occasionally throughout the workday for varying lengths of time, especially to maintain the corrugate material feed level for the packer., • Squatting/Kneeling/Crawling/Twisting/Turning – The Packaging Operator may squat to pick up product from the floor, or during various cleanup duties. There will be occasional twisting and turning at the waist is used when loading material, or when performing routine responsibilities., • Climbing/Balancing/Reaching – The Packaging Operator steps on and off the platforms and climbs stairs to access equipment. The Packaging Operator reaches below and/or above shoulder level when removing or adding boxes to a pallet, loading materials, and dumping unfinished product components., • Grasping/Manipulation – The Packaging Operator will engage in frequent use of hands and fingers for pressing buttons, opening equipment doors, typing on a keyboard, clearing jams, executing changeovers, and performing quality checks. food safety requirements: • Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety., • Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas., • Perform all duties necessary to meet Company, Customer, and/or Government requirements and standards as prioritized by the Company., • Ability to initiate action to prevent the occurrence of nonconformities relating to food safety and the quality of the product, processes, quality system, or safety system., • Identify and record any problems relating to food safety and the quality of ingredients, processes, quality system, or safety system., • Control further processing or delivery of nonconforming products in terms of food safety and quality issues until the deficiency or unsatisfactory condition has been corrected., • In the event of an absence, another employee with the same skill level will assume the duties and responsibilities as required. how fairlife nourishes you: At fairlife, we believe in better — and that includes how we support our people. We offer a comprehensive suite of benefits and wellbeing resources designed to support you physically, emotionally, socially, and financially, both in and out of work. • Comprehensive medical, dental, and vision coverage, effective day one!, • Supplemental health plans (hospital indemnity, accident, and critical illness insurance), • Paid Time Off to recharge and support work-life balance, • Paid parental leave & adoption assistance (up to $10,000), • Parental support & family care benefits, including childcare resources and lactation support, • 401(k) to support retirement planning with up to 9% in employer match, • Wellness reimbursement (up to $500 for qualified wellbeing expenses), • Employee Assistance Program (EAP) for emotional wellbeing and work-life support, • Company-paid life insurance and short-term disability, • Employer HSA funding (for HDHP participants), • Tuition reimbursement (up to $10,000) and student loan repayment ($200/month), • Learning & development programs to unlock your full potential, • Rewards & recognition, matching gifts, free product, and Business Resource Groups fairlife's nour!sh program is designed to meet you where you are — supporting your individual wellbeing journey while enabling you to do your best work every day. position location: Webster, NY reports to: Packaging Supervisor travel requirements: little to none exempt/nonexempt: nonexempt This position is eligible for bonus. *Base pay offered may vary depending on geography, job-related knowledge, skills, and experience. A full range of medical, financial, and/or other benefits, dependent on the position, is offered. Base pay range: $24—$25 USD fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email careers@fairlife.com. For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.

Job Description About the Role At HUNT, you'll do more than design buildings, you'll help create the schools, healthcare facilities, municipal buildings, commercial developments, and industrial projects that serve communities throughout New York and Pennsylvania. We're looking for a licensed Structural Engineer who enjoys solving complex engineering challenges, collaborating with a multidisciplinary team, and mentoring the next generation of engineers. Whether you're leading structural design, evaluating existing facilities, or partnering with architects and civil engineers to deliver innovative solutions, you'll have the opportunity to make a lasting impact while growing your career in a supportive, team-oriented environment. If you're looking for a firm where your expertise is valued, your ideas are heard, and your professional growth is encouraged, we'd love to hear from you. Key Responsibilities As a member of HUNT's Structural Engineering team, you will: • Design structural systems for steel, concrete, masonry, and wood buildings., • Lead structural analysis and prepare construction documents for a wide variety of building projects., • Perform structural assessments and evaluations of existing facilities., • Apply industry standards and design codes, including the International Building Code, New York State Building Code, ASCE 7, AISC, ACI, and NDS., • Utilize structural analysis and design software including RAM Structural System, RAM Elements, Enercalc, and Revit., • Collaborate with architects, civil engineers, MEP engineers, surveyors, and other technical professionals to deliver coordinated project solutions., • Participate in client meetings and provide technical expertise throughout project development., • Mentor junior engineers and contribute to a collaborative team environment. Qualifications Required Qualifications: • Professional Engineer (PE) license in Civil or Structural Engineering., • Five or more years of structural engineering experience focused on building design., • Experience designing structural systems using steel, concrete, masonry, and wood., • Strong understanding of applicable building codes and structural design standards., • Excellent communication and collaboration skills. Preferred Qualifications: • Experience with RAM, STAAD, RISA, or similar structural analysis software., • Working knowledge of Revit and AutoCAD., • Experience managing projects or mentoring junior staff. Benefits • Paid Holidays, • PTO, • Dental, Health, and Vision Insurance, • FSA/ HSA, • Life Insurance, • 401(K) plan, • Continuing Education Support About HUNT HUNT is a full-service A/E Firm with offices located in Albany, NY, Binghamton, NY, Horseheads, NY, Rochester, NY, and Towanda, PA. As a firm, our vision is to build vibrant communities by empowering creativity and partnership. We have accomplished this to date by being an entrusted partner to our clients/communities, providing full-service design that is innovative, practical and community focused. In addition, we offer a family friendly, flexible workplace that aims to encourage long, successful, sustainable careers through a variety of life stages. We are excited to welcome you to apply to this strong culture and hope that your values align with those of the firm, which will further enhance our culture even as we look toward targeted growth opportunities. HUNT is an Equal Opportunity Employer (EOE). Salary commensurate with experience and qualifications.

Job DescriptionAre you a Structural Engineering graduate or early-career engineer ready to put your education into practice and build a strong foundation for your career? At Encorus, you’ll learn from experienced Professional Engineers while contributing to local and national projects across a range of industries, from industrial facilities and commercial buildings to complex multidisciplinary projects. This full-time, in-office position is based in our Rochester, NY office. You’ll support structural design and analysis, prepare engineering drawings and technical documentation, and collaborate with mechanical, electrical, process, and drafting teams. Along the way, you’ll gain experience with steel, concrete, masonry, and timber structures while developing your technical skills through hands-on work, mentorship, and opportunities for career growth. Responsibilities: • Assist with the design and analysis of structural systems for industrial, commercial, and other projects., • Prepare and revise structural drawings and construction documents using AutoCAD, RISA 3D, and/or Revit., • Perform basic structural calculations and assist with the design of steel, concrete, masonry, and timber structures under the guidance of senior engineers., • Coordinate structural designs with architects, engineers, and other project team members to ensure an integrated project approach., • Support project documentation, including specifications, calculations, material takeoffs, estimates, and technical reports., • Conduct site visits and field investigations to document existing conditions and support project development., • Review shop drawings, respond to RFIs, and assist with construction administration and field observations., • Research applicable building codes, standards, and project requirements to support accurate and compliant designs.Qualifications:, • Bachelor’s degree in Civil or Structural Engineering., • Experience in structural design or asset management (internships or early full-time experience is a requirement)., • Engineer-in-Training (EIT) registration preferred., • Proficiency in AutoCAD, Revit, MathCAD, and Risa3D or similar software., • Strong communication and teamwork skills., • Willing and able to work in both office and field environments., • Valid driver's license with the ability to travel locally and occasionally out of state., • Ability to pass pre-employment background checks., • Ability to comply with the company’s drug screening requirements, including pre-employment and random testing.Pay Range: The salary range for this position is $65,000 to $80,000 annually. Actual compensation will be based on the candidate’s knowledge, skills, and experience. Encorus Group is an equal opportunity employer (EOE/AA Disability/Veteran), committed to fair and equitable compensation. Join Us! At Encorus, we value innovation, collaboration, and professional development. We offer a competitive benefits package, opportunities for career advancement, paid training, and flexible scheduling depending on project needs and team collaboration. If you’re ready to take your career to the next level and make a significant impact in structural engineering, we want to hear from you! Visit our careers page at https://encorus.com/about-us/careers/ to learn more and to apply. Powered by JazzHR E9yE3vfeVT

Job DescriptionDescription: Are you looking for a career that offers you the opportunity to share your talents and make a positive impact on the people within our community? Join the Landsman family and take the opportunity to utilize all your skills. Whether you are working independently on projects or alongside other members of the team, you can make a difference. We’re looking to hire a hard-working, motivated, customer service minded individual for the full-time position of Assistant Maintenance Supervisor. Here is a summary of what we need from you: • Effective experience with work including routine resident service requests, preventative maintenance, emergency maintenance, capital improvement and replacements, tool and equipment maintenance, and seasonal maintenance., • Experience with performing maintenance and/or repairs to building systems and apartments (Knowledge of plumbing, carpentry, electrical, appliances, painting/drywall, HVAC, fire and security systems, elevators, as applicable.), • Supervisory experience is a plus as our Asst. Maintenance Supervisors are responsible for assisting with staff training, recruitment and monitoring daily activities of the maintenance teams., • Snow removal experience. It will be mandatory., • The ability to be on-call for evening and weekend emergencies. Reliable transportation is a must., • Excellent interpersonal and communication skills required to interact with residents, vendors, and office staff., • Standard background check and drug screening required. What we offer our full-time employees: • Medical, Dental and Vision benefits, • Company Paid Life Insurance, • Voluntary Life Insurance, • Supplemental Short-Term Disability, • Company Paid Long-Term Disability, • 401k Retirement Plan with Company Match, • Employee Referral Bonus Program, • Paid Time Off, • 10 Paid Holidays Annually Landsman is proud of the fine reputation we have earned as a high-quality professional real estate management organization and would like you to join our team. Contact us now to learn more about this great opportunity! Landsman Development Corp. (LDC) was established in 1971 by its founder and initial shareholder, Elliott Landsman. Since its inception, the company has developed and invested in a wide variety of projects including industrial, commercial, office, retail, and multi-family residential, both subsidized and conventional. Most of the properties developed are owned by partnerships in which LDC has retained an interest as managing general partner or managing member. Mayzon Management Corporation was incorporated in 1972 to manage real estate developed by its parent company, Landsman Development Corp. The company name has evolved over the years, and the name has been changed to Landsman Real Estate Services, Inc. Landsman has grown to manage more than 2,400 rental units and over three million square feet of industrial, commercial and office space and has also become the property management company of choice for several third-party owners. Requirements: Minimum Educational Requirements: • High School Diploma or equivalent. Minimum Experiential Requirements: • 3+ years multifamily or construction site management., • Prior experience related to carpentry, plumbing, electrical, appliance, HVAC, and building systems. Special Skills/ Work Conditions Required: • Must have excellent communication, interpersonal, customer service, organizational, time management, and verbal and written skills., • Must be able to communicate in English with residents, emergency providers and outside contractors., • Must possess mechanical aptitude, skillful use of equipment and tools, and have physical and manual dexterity skills., • Must have computer proficiency in Microsoft Office and ability to navigate the Internet., • Required use of a cell phone., • Must be able to manage a flexible schedule including overtime and be on-call as needed., • Must be able to lift, move and transport up to 50lbs without the assistance of hand truck, dolly, or other mechanical lifting devices. Must be able to walk, bend, stoop, climb stairs, access and work in confined spaces as well as at heights in excess of 20 feet and have the mobility required to use ladders.

Job Description About Re:Build Optimation and Re:Build Manufacturing At Re:Build Optimation, we specialize in delivering custom-engineered process equipment and automated systems to clients across the globe. With nearly 40 years of experience in complex chemical process systems, we have built a reputation for precision, reliability, and innovation. Our multidisciplinary team of 70+ engineers, designers, and programmers, combined with 150,000 square feet of fabrication space and over 70 skilled tradespeople, allows us to provide full turnkey solutions—from initial concepts through fabrication, installation, and commissioning. As part of Re:Build Manufacturing, we leverage the strength of a national industrial powerhouse while maintaining the agility and personalized service of a specialized firm. We serve industries ranging from traditional and green energy to chemicals, pharmaceuticals, food & beverage, glass, and advanced manufacturing, offering tailored solutions that optimize efficiency and performance. At Re:Build Optimation, we believe in a collaborative approach, working closely with our clients to develop solutions that align with their unique operational goals. Our deep industry expertise and end-to-end capabilities make us the ideal partner for companies seeking innovative automation, process control, and engineered systems. Who We Are Looking For We are seeking an Electrical Construction Estimator to develop accurate, field-informed cost estimates for industrial electrical construction and installation projects. This role is ideal for someone with a strong electrical field background who understands how work actually gets done—someone who can translate drawings and specifications into real-world execution plans, costs, and risks. You’ll work closely with construction managers, engineers, tradespeople, and manufacturers to ensure estimates are practical, competitive, and aligned with field realities across industries like energy, chemicals, pharmaceuticals, and advanced manufacturing. What You’ll Do Analyze bid packages and develop detailed cost estimates including labor, materials, equipment, and subcontractor scopes Perform takeoffs and interpret: Electrical drawings and schematics, P&IDs and Isometric and multi-view drawings Conduct site walks and client walkthroughs to validate scope and conditions Collaborate with construction managers, engineers, and field electricians to validate constructability and execution approach Coordinate with manufacturers and vendors to confirm product specifications and pricing Engage with inspectors and regulatory authorities to ensure permitting and compliance Specify and source electrical materials (wire, conduit, fittings, control systems, etc.) Manage vendor quotes, material procurement strategies, and delivery planning Support project teams with schedule alignment, labor planning, and cost tracking Ensure estimates reflect realistic installation methods and field constraints Apply and uphold standards across: NEC / NFPA 70 and OSHA (29 CFR 1926) Incorporate safety considerations such as LOTO, arc flash, and site-specific requirements into estimates Identify opportunities to improve cost efficiency, estimating accuracy, and standardization Maintain organized documentation of estimates, assumptions, and revisions What You Bring • 7+ years of electrical field construction experience, • 3+ years of electrical estimating experience, • Strong hands-on knowledge of power distribution, instrumentation and control wiring, • Ability to read and interpret blueprints and electrical schematics, P&IDs, and multi-view and isometric drawings, • Working knowledge of NEC, NFPA 70, and OSHA standards, • Experience with estimating tools and Microsoft Office (Excel, Word, Outlook), • Familiarity with AutoCAD or SolidWorks is a plus, • Strong organizational and multitasking abilities, • High attention to detail and analytical thinking, • Ability to balance office-based estimating with field validation, • Collaborative mindset with strong communication skills Additionally • Valid driver’s license, • Willingness to travel locally for site visits Work Environment • Primarily office-based with regular field visits to construction and industrial sites, • Exposure to active job sites, industrial facilities, and client environments Compensation Range: Hourly rate for this position is expected to be between $40.00 to $60.00, plus participation in our annual bonus plan and long-term incentive plan. The actual pay may be higher depending on your qualifications and experience. The BIG payoff We are a company who is going to make a difference in the industries and the communities in which we choose to operate. Every employee of Re:Build will share ownership in the company and will share in the financial rewards of the success we achieve together, at all levels of the company! We want to work with people that reflect the communities in which we operate. Re:Build Manufacturing is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, veteran status, marital status, parental status, cultural background, organizational level, work styles, tenure, and life experiences. Or for any other reason. Re:Build is committed to providing reasonable accommodation for qualified individuals with disabilities in our job application procedures. If you need assistance or accommodation due to a disability, you may contact us at accommodations.ta@ReBuildmanufacturing.com or you may call us at 617.909.6275. You should be proficient in: • Industrial Electrical Experience, • Electrical Project Estimating

Job DescriptionDescription: Regional Sales Lead Full Time - Salaried Rochester, NY, US At Hewitt Young, excellence is our standard. We look for Builders who take ownership, push through challenges, and care about results as much as their craft. When you join our team, you earn your edge every day, and we make sure it pays off. Role Mission: The Regional Sales Lead role is responsible for securing profitable work within assigned geographic region by prospecting, building relationships, presenting proposals, and converting opportunities into awarded projects. This role expands Hewitt Young’s presence and brand at the local market level. Requirements: Core Responsibilities: • Identify and win new business opportunities across the assigned region., • Build trusted relationships with strategic customer bases including but not limited to GCs, owners, developers, integrators, industrial clients and municipalities., • Represent Hewitt Young in client meetings, job walks, networking events, and industry forums., • Qualify opportunities to ensure bid targets align with HY strategy and margin goals., • Partner with Estimating and Preconstruction to deliver accurate, clear, and competitive proposals., • Maintain CRM discipline – updates, forecasts, status notes, and next steps of accountability., • Communicate sales risks and opportunities proactively to leadership., • Support contract negotiation and ensure scope clarity to eliminate downstream surprises., • Serve as a professional and recognizable face of Hewitt Young within the region. Must-Have Competencies: • Proven success in construction or field service sales., • Strong communication, negotiation, and relationship building skills., • Knowledge of construction scopes, bids, proposals, and project lifecycles., • CRM proficiency and high organization in tracking pipeline activity., • Resilience, urgency, and discipline in a field-driven role. WHAT YOU'LL FIND HERE AT HEWITT YOUNG: At Hewitt Young, we don't just fill roles - we build careers! Above all we take pride in our work. Every project reflects who we are, how we operate, and the standards we stand behind. If you're driven, accountable, and ready to grow, you'll find your place here. Hewitt Young is an equal opportunity employer and consider all applicants without regard to any legally protected status.

Job Description Fire Protection Consultant Location: Remote, New England and New York Salary Range: $120,000 to $150,000, depending on experience and qualifications A well-established multi-discipline engineering practice is looking for a Fire Protection Consultant to join its team on a remote basis within New England or New York. This is a permanent, full-time role with real room to grow, working alongside a collaborative group of engineers across multiple disciplines on a varied and interesting project portfolio. Why Consider This Opportunity? This is a firm with a strong culture built on loyalty, technical quality, and looking after its people. You would be joining a tight-knit fire protection team where your contribution is visible from day one, with direct access to leadership and genuine influence over the direction of the department. The work spans a mix of sectors including industrial, commercial, and healthcare, covering both code consulting and fire protection systems design. If you are looking for variety, responsibility, and the chance to be part of something that is growing, this is worth a conversation. Key Responsibilities • Conduct fire and life safety code analyses, building code evaluations, and plan reviews across a range of facility types., • Prepare fire protection system design documents, including hydraulic calculations and preliminary system layouts and specifications., • Coordinate with civil, structural, electrical, and mechanical teams on multidisciplinary projects., • Carry out construction administration reviews and periodic site visits., • Develop fire protection strategies and code alternatives in collaboration with project teams and clients., • Prepare and review technical reports and project documentation., • Build and maintain client relationships as a trusted technical resource. Qualifications • Bachelor's degree in Fire Protection Engineering, or a related engineering discipline (Mechanical, Electrical, Civil, Chemical)., • 3-10+ years of relevant experience in fire protection engineering, life safety code consulting, or a combination of both., • PE designation preferred, or on track for licensure., • Comfortable working independently and managing your own workload in a consulting environment., • Strong communication skills, with the ability to work directly with clients, contractors, and authorities having jurisdiction. Additional Details • Annual performance bonus of up to 10%, • 100% company-paid health insurance, • Summer half-day Fridays, • Support for professional development and continuing educationWe thank all applicants for their interest, however, only those under consideration will be contacted.

Job Description K&A Power Group– is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Document Control Specialist to join our team at K&A Engineering in Binghamton, New York. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • Responsible for the development, implementation, training and auditing of all controlled documentation: drawings, procedures, reports and any other document under revision control, • Process, distribute, and maintain controlled documentation using Customer document control system, • Process documents for revision and approvals, • Monitor the distribution and reconciliation of process or reference documents, • Perform overall document control and flow of engineering design/submittals and processes/reviews, • Implement master tracking of all packages/deliverables and provide data from this tracking to support management reporting What we’re looking for: • Associate and/or Bachelor’s degree in a related field of work; or a combination of two to three years of related experience and/or training; or equivalent combination of education and experience, • Thrive in a team environment; be able to assist other document control/program management resources, • Understanding of design and drafting standards required for the check and release of engineering drawings, • 5+ years of experience in Document Management working with Project Wise and SharePoint, • Experience in the functional area under which it will be contracted: Substations, T&D, Gas-Hydro and OSG Pay Range: $65,000-$70,000/annually Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with Company Match), • Lifestyle Spending Account (LSA), • Paid Parental Leave, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance, • Long-Term Disability, Short-Term Disability, and Life Insurance, • EAP (Employee Assistance Program) Check out our career page for more information! The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job Description K&A Power Group – is a privately held engineering firm delivering worldclass technical expertise and engineering excellence to power utility and industrial clients across the United States, Asia, the Middle East, and Africa. We provide comprehensive consulting, engineering and design, program and project management, construction management, and EPC services, specializing in substation, transmission, distribution, and distributed energy resources. We pride ourselves on attracting and developing top talent, building a culture of excellence, and building meaningful, long-term relationships with our employees, clients and communities, wherever they are in the world. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Scheduler & Cost Controller to join our team at K&A Power Group in Binghamton, NY. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: Role Expectations: • The Scheduler and Cost Controller is required to produce a variety of regular and ad-hoc reports in support of our project planning and control initiatives. Working closely with all functional departments, the Cost Controller plays a key role in ensuring that policies, procedures, and standards are adhered to., • Verifying the accuracy of all cost information – including confirmation that costs have been properly coded and allocated to the project budget. Producing required accounting and project cost reports. Producing reports on deviations, under-runs and over-runs. Preparing forecasts and cost trend reports. Reviewing and evaluating trends and their impact on project costs. Monitoring project costs and commitment to budget and forecast. Maintaining change control and the change order Assessing progress measurement and developing/updating progress curves for progress reporting. Responsible for EVM during all project stages., • Develop an Integrated Master Schedule of the project according to Customer standards and approved scheduling tool., • Develop and evaluate the activities in the Integrated Project Schedule that affect the project and be able to capture work that can be completed in six (6) month Look-Ahead increments including work on critical path, work with less than 2 weeks float, work that can be consolidated, and work required to support that which is compatible with other projects., • Develop Project Sequence/Logic – preparation of project schedules that accurately identify the interrelationship of activities to be performed by the various disciplines and Third-Party involvement in the project., • Perform Current Schedule and Cost (EV, AC) vs. Performance Measurement Baseline, compare and highlight major activity deviations between the original baseline and the current plan based on monthly updates., • Perform Critical Path Analysis, identify and analyze critical paths/activities to ascertain project completion in time and in budget, including forecasting delays and evaluation of alternative scenarios., • Overall responsibility for providing guidance to other project personnel on good scheduling practices and techniques., • Customer Manager Planning and Control will coordinate Scheduler-Cost Controller Group to ensure the accomplishment of the Portfolio planning and control goals., • Scheduler-Cost Controller Group will work under Manager Planning and Control who will provide direction and oversight., • Produce a variety of regular and ad-hoc reports in support of our project planning and control initiatives., • Work closely with all functional departments, the Controller/Cost Analyst plays a key role in ensuring that policies, procedures, and standards are adhered to., • Responsible for developing, implementing, feeding, reconciling and maintaining valuable project control databases and reports for projects., • Manages and ensures the reconciliation of program controls data with financial and performance systems, coordinating with Project Managers., • Verifies the accuracy of all cost information including confirmation that costs have been properly coded and allocated to the project budget., • Producing required accounting and project cost, • Producing reports on deviations, under-runs and over-, • Preparing forecasts and cost trend, • Reviewing and evaluating trends and their impact on project, • Monitoring project costs and commitment to budget and, • Maintaining change control and the change order, • Assessing progress measurement and developing/updating progress curves for progress reporting., • Responsible for EVM during all project stages. What we’re looking for: • Minimum 3 years of experience in Project Controlling and 4 years of experience in Construction Project Scheduling required, • Bachelor’s degree preferred, • CAPM or PMI-SP Certificate or equivalent (requires Avangrid approval), • SAP experience required, • Primavera (preferred) and/or MS Project experience required, • Experience in the functional area under which it will be contracted: Substations, T&D, Gas-Hydro and OSG Pay Range $85,000—$110,000.00 Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with company match), • Lifestyle Spending Account (LSA), • Paid Parental Leave after 12 months of employment, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, • Long-Term Disability, Short-Term Disability, and Life Insurance, • EAP (Employee Assistance Program), • Parking and Transit Reimbursement, • Pet Insurance Check out our career page for more information! The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job Description⚡ Panel Builders / Electrical AssemblersBuild Innovative Control Panels | Earn Up to $29/Hour Are you someone who enjoys working with your hands, reading blueprints, and bringing complex systems to life? We're looking for skilled Panel Builders and Electrical Assemblers to join a growing manufacturing team where craftsmanship, quality, and teamwork make a real impact every day. This is more than just an assembly job. You'll be building custom electrical panels and control systems that help power industrial operations across a variety of industries. If you're looking for a career with long-term stability, competitive pay, and opportunities for advancement, we want to hear from you. ???? Compensation Up to $29.00 per hour, based on experience, skills, and technical knowledge. ???? What You'll Be Building • Assemble custom electrical control panels and industrial equipment, • Install and wire electrical components according to schematics and blueprints, • Route, terminate, and label wiring with precision, • Use hand tools, power tools, and testing equipment, • Read and interpret wiring diagrams, layout drawings, and work instructions, • Inspect finished assemblies to ensure quality and compliance, • Troubleshoot minor assembly and wiring issues as needed, • Support continuous improvement and production efficiency initiatives???? What Makes You a Great Fit, • Experience in panel building, electrical assembly, manufacturing, or mechanical assembly, • Ability to read blueprints, schematics, and wiring diagrams, • Comfortable working with hand and power tools, • Strong mechanical aptitude and problem-solving skills, • High attention to detail and commitment to quality workmanship, • Reliable attendance and a positive team-first attitude???? Why People Join Our Team✅ Earn Up to $29/Hour Be rewarded for your experience and technical abilities. ✅ Consistent First Shift Schedule Monday-Friday | 7:00 AM - 3:30 PM Enjoy your evenings and weekends off. ✅ Outstanding Benefits Package • Medical, Dental & Vision Insurance, • Paid Time Off, • Paid Holidays, • New York State Sick Leave, • Employee Support Programs✅ Career Growth Opportunities Develop your electrical and manufacturing skills through hands-on training and advancement opportunities. ✅ Clean, Professional Work Environment Work in a modern manufacturing facility where safety, organization, and teamwork are prioritized. ???? Take the Next Step in Your Career Whether you're an experienced Panel Builder, Electrical Assembler, Wire Technician, or Manufacturing Professional, this is your opportunity to join a company that values skilled trades and invests in its employees. Apply today and discover why talented assemblers are choosing to grow their careers here while earning up to $29/hour. ⚡???????? Job Type & Location This is a Permanent position based out of Rochester, NY. Pay and Benefits The pay range for this position is $25.00 - $29.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Rochester,NY. Application Deadline This position is anticipated to close on Oct 6, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Job Title: Quality Technician Job Description Join our team as a Quality Technician where you will play a pivotal role in ensuring the highest standards of product quality and verification. You will work with advanced measurement systems and contribute to mission-critical projects in a dynamic environment. Responsibilities • Conduct quality inspections and product verifications using CMM and Keyence measurement systems., • Perform First Article Inspection (AS9102) and provide support for PPAP., • Manage statistical process control (SPC), AQL, and non-conformance documentation., • Read and interpret blueprints and precision measurement tools., • Collaborate with various departments to ensure quality standards are met. Essential Skills • Minimum of 3-4 years of Quality Inspection/Technician experience within a machine shop environment., • Proficiency in using calipers, micrometers, CMM, Zeiss-Calypso, and GD&T., • Experience with precision parts made by CNC machines., • Ability to read and understand product drawings including GD&T requirements. Additional Skills & Qualifications • Associate degree in a technical field or equivalent technical work experience., • 2-5 years of experience in a manufacturing environment, including machining and assembly., • Knowledge of Microsoft Office (Word, Excel, PowerPoint)., • Experience with sophisticated quality inspection equipment such as Coordinate Measurement Machines, laser scanners, and more., • Experience in a regulated industry with certification to AS9100 or ISO9000., • Excellent communication skills and ability to work with all levels of personnel. Why Work Here? Enjoy a clean and laid-back work environment with opportunities for cross-training and career advancement. Be part of a team working on mission-critical projects in a supportive and collaborative atmosphere. Work Environment The position offers a split shift from Monday to Thursday, 9:30 am to 7:30 pm, with an alternative first shift available. Work in a climate-controlled facility with air conditioning, and be prepared for occasional exposure to industrial oils, loud noise, and other environmental factors. Safety precautions, including ear protection, are provided. Physical requirements include frequent standing, walking, bending, kneeling, and the ability to lift up to 75 lbs. Job Type & Location This is a Permanent position based out of Rochester, NY. Pay and Benefits The pay range for this position is $49920.00 - $58240.00/yr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. 401k, Health, Vision Dental Workplace Type This is a fully onsite position in Rochester,NY. Application Deadline This position is anticipated to close on Oct 6, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionDescriptionKennedy Mechanical Plumbing and Heating is seeking a detail-oriented and motivated Plumbing Designer to join our growing team. In this role, you will work closely with project managers, field teams, estimators, and customers to design plumbing systems. The ideal candidate is organized, technically skilled, and passionate about delivering high-quality designs that support efficient project execution. Responsibilities • Prepare construction documents, shop drawings, and specifications for various commercial, industrial, and multi-family residential projects, • Assist in the development of design approaches and concepts on assigned projects, • Assist in data collection and/or field verification, • Research building, plumbing and gas codes, • Assist in selection of equipment to fit the project design, • Produce detailed plumbing layouts in Autocad and Revit, based on applicable codes and standards, • Produce plumbing fixtures schedules and rise diagrams, • Produce project-based plumbing drawings and specifications, • Ensure that all drawings are prepared with accuracy, neatness and timeliness (prior to project deadlines), • Communicate with team members, team leaders, other disciplines, and outside vendors to obtain necessary information for drawings, • Assist with on-site observations during construction and coordinate design requirements with contractors and equipment suppliers under the direction of the design manager, • Create and review permit, construction and shop drawings, • Interface with field personnel during construction to assist in resolving any field variance discrepancies Qualifications • Experience in plumbing design, mechanical construction, or related field, • Proficiency with AutoCad and/or Revit MEP design software, • General knowledge of Microsoft Office Suite, • Knowledge of plumbing systems including, but not limited to: sanitary and storm drainage, sanitary venting, domestic water systems, gaseous fuel piping, medical gas and process piping, • Strong attention to detail and organizational skills, • Excellent communication and teamwork skills, • Knowledge of building codes, engineering theories and methodologies, • Ability to read and interpret blueprints and technical documents Benefits • Competitive pay based on experience, • Health, Dental, and Vision Insurance, • Health Saving Account with company contribution, • Company Paid Life Insurance, • 401(k) plan with company matching, • Paid Holidays and PTO, • Company-paid training and development opportunities

Job DescriptionDescription: Project Architect | Commercial Design Full Time | Architecture | Commercial Projects Elizabeth Banzhaf, LPN Co-Founder & COO | Heartline Staffing Call or Text: 272-230-3157 LinkedIn: View Elizabeth's LinkedIn Prefer a confidential conversation instead of applying? Call or text Elizabeth directly at 272-230-3157. Heartline Staffing, in partnership with Purple Cow Recruiting, is hiring a Project Architect for Popli Design Group in Rochester, New York. POSITION OVERVIEW Popli Design Group is seeking an experienced, licensed Project Architect to lead the architectural design, documentation, and technical coordination of commercial and multidisciplinary projects. This is a hands-on design position for an architect who wants to remain actively involved in project development rather than working exclusively in project management. The Project Architect will oversee architectural work from design development through permitting, construction administration, and project closeout. This individual will coordinate with internal engineering disciplines, external consultants, clients, contractors, and governing agencies while ensuring that project documents meet applicable building codes, client expectations, and Popli Design Group standards. The successful candidate will provide technical leadership, maintain project momentum when the Project Manager is unavailable, supervise junior architectural staff on a project basis, and balance design responsibilities with team coordination and client communication. Key responsibilities include: • Lead the architectural design and production of commercial and multidisciplinary projects, • Remain actively involved in hands-on design, technical documentation, and drawing production, • Coordinate architectural work with internal engineering teams, external consultants, clients, contractors, and governing agencies, • Prepare and oversee complete project documentation for client approvals and state or local permits, • Ensure drawings and specifications meet applicable building codes, project requirements, and company standards, • Organize project workloads and develop redlines for junior architectural staff to implement, • Review staff work and provide regular feedback, mentorship, and technical guidance, • Coordinate closely with Project Managers regarding staffing needs, project priorities, design progress, and deadlines, • Maintain project momentum and make appropriate technical decisions when the Project Manager is unavailable, • Perform construction site visits and project walkthroughs, • Review RFIs, shop drawings, submittals, and contractor questions during construction, • Issue supplementary instructions and help resolve design or construction conflicts, • Confirm that contractor work aligns with contract documents and project specifications, • Review project closeout documentation and support final project completion, • Select and apply appropriate architectural procedures, technical methods, and design solutions, • Prepare clear meeting minutes, reports, correspondence, and project documentation, • Assist with value-engineering efforts while protecting design quality, functionality, and code compliance COMPENSATION • $80,000-$120,000 Annual Salary, • Final compensation will be based on experience, licensure, technical expertise, and overall qualifications SCHEDULE • Full-Time Position, • On-Site at the Rochester, New York Office, • No Remote Work, • Local travel to project sites is required WHY ARCHITECTURE PROFESSIONALS ARE APPLYING • Join Popli Design Group, a multidisciplinary architecture and engineering firm serving clients since 1982, • Work within an established organization with seven offices across New York State, • Remain actively involved in architectural design and documentation rather than moving into a fully administrative project-management role, • Lead commercial and multidisciplinary projects from design development through construction completion, • Collaborate directly with architects, engineers, consultants, clients, contractors, and governing agencies, • Mentor junior architectural professionals and influence the technical development of project teams, • Apply advanced architectural judgment while maintaining meaningful involvement in daily project design, • Participate in construction administration, site visits, code compliance, permitting, and project closeout, • Build a long-term career with an established firm known for quality, professionalism, and integrity BENEFITS • Full-Time Direct-Hire Employment, • Long-Term Professional Growth Opportunity, • Project Leadership and Mentorship Responsibilities, • Exposure to Commercial and Multidisciplinary Projects, • Benefits package details will be confirmed during the interview process Requirements: • Professional Architect License REQUIRED, • New York State Architect License Preferred; Candidates Must Be Able to Obtain New York Reciprocity Within 6 Months REQUIRED, • Minimum 6 Years of Hands-On Architectural Design and Documentation Experience REQUIRED, • Predominantly Hands-On Design Experience Rather Than Exclusively Project Management Experience REQUIRED, • Commercial, Institutional, Civic, Industrial, or Other Non-Residential Project Experience REQUIRED, • Residential-Only Architecture Experience Does Not Meet the Position Requirements, • Five-Year NAAB-Accredited Architecture Degree or an Equivalent Combination of Education and Relevant Professional Experience REQUIRED, • Experience Leading the Development and Production of Architectural Documents REQUIRED, • Experience Coordinating Multidisciplinary Projects with Engineers, Consultants, Clients, Contractors, and Governing Agencies REQUIRED, • Strong Knowledge of Building Codes, Permit Documentation, Construction Documents, and Technical Standards REQUIRED, • Ability to Lead Projects and Maintain Progress When the Project Manager Is Unavailable REQUIRED, • Experience Developing Redlines, Reviewing Staff Work, and Mentoring Junior Architectural Staff REQUIRED, • Proficiency in AutoCAD REQUIRED, • Proficiency in Revit REQUIRED, • Proficiency in Bluebeam REQUIRED, • Proficiency in Microsoft Office Suite REQUIRED, • Proficiency in New York State Energy Software REQUIRED, • Strong Written, Verbal, Technical, and Client-Facing Communication Skills REQUIRED, • Ability to Read and Interpret Complex Technical Documents, Drawings, Codes, and Specifications REQUIRED, • Ability to Prepare Professional Reports, Meeting Minutes, Emails, Memos, and Project Correspondence REQUIRED, • Valid Driver's License and Acceptable Motor Vehicle Record REQUIRED, • Ability to Travel to Construction Sites and Attend Project Walkthroughs REQUIRED, • Ability to Work Full Time On-Site in the Rochester, New York Office REQUIRED, • Remote Work Is Not Available for This Position, • United States Citizenship or Permanent Resident Status REQUIRED, • Advanced Construction Administration Experience Preferred, • Experience Reviewing RFIs, Shop Drawings, Submittals, and Closeout Documentation Preferred, • Experience Organizing Workload Assignments and Supporting Value-Engineering Efforts Preferred Not ready to formally apply? That's okay. Many architecture professionals prefer a confidential conversation first. Call or text Elizabeth Banzhaf directly at 272-230-3157 to discuss the position privately. Heartline Staffing is a Strategic Talent Partner with Purple Cow Recruiting. Applications are securely tracked and reviewed through our applicant-tracking system. Qualified candidates will be contacted directly regarding next steps.

Job Description Work Setting: Hybrid Hazen and Sawyer is seeking Principal Structural Engineer for our New York, New Jersey, Connecticut, or Massachusetts offices. As part of our Structural team. The position will work on a wide range of projects to include planning, design, permitting, and construction of structures in the ‘water space’ (i.e. drinking water, wastewater, water resources, conveyance, canals and ports). Client development, project management, technical leadership and staff mentoring opportunities will be possible for the selected individual across Hazen’s Northeast and Midwest businesses. Primary focus will be projects in NY, NJ and CT. Fieldwork and site visits from planning through construction may be required with occasional travel. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,400 employees in 90+ offices throughout the United States, Latin America, Canada, and the UK., • A flexible hybrid work schedule supports today's busy professionals Key Responsibilities: • Project engineering/management, mentoring and developing junior staff, performing site inspections and assessments of existing infrastructure. ·, • Perform assessment, design, and construction tasks for water and wastewater treatment projects., • Produce design calculations, technical reports, permitting, detailed design and engineering plans/specifications for environmental structures such as industrial buildings, pump stations, process basins, storage facilities and treatment facilities., • Participate in construction tasks for similar projects including submittal review, responding to RFI’s, site inspections and clarifications during construction, • Technical Engineering Leadership., • Staff Development. Required Qualifications: • BS degree in Civil Engineering (with a Structural Concentration preferred) or Structural Engineering, • PE license (or ability to obtain within 6 months), • 5-12 years of related experience, • Experience in design and construction of structural steel, reinforced concrete, reinforced masonry, and aluminum is required as well as knowledge of applicable building codes, design standards including ACI, AISC, ASCE, and structural analysis and design software., • Candidates must be effective communicators and be able to successfully work in a multi-discipline team environment Preferred Qualifications: • Advanced degree (Master’s or Doctorate) in Civil Engineering (with a Structural Concentration) or Structural Engineering What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans)., • Pre-tax flexible spending plans for medical, dependent care, and transportation., • Short- and long-term disability, plus employer-paid life insurance., • Paid holidays, floating holidays, and paid time off (PTO)., • Employer-contributed 401(k) plan and additional financial planning support., • Professional development opportunities, including tuition reimbursement, in-house training, and incentives for professional licensure and professional organization memberships., • Starting pay range for this position depends on skills, experience, education, and geographical location. #li-hybrid

Job DescriptionWhy Turtle? At Turtle, we’re redefining what it means to be an industry leader in electrical distribution, and we want you to be part of our exciting journey! For over 100 years, we’ve built a reputation for innovation, excellence, and exceptional customer service—and we’re just getting started. We are a diverse, passionate team spread across the US, Canada, Mexico, and Puerto Rico, committed to growth, learning, and creating opportunities for each other. At Turtle, every day is a chance to make a real difference, solve complex challenges, and push the boundaries of what’s possible. We believe in fostering an environment that inspires collaboration and sparks creativity, where employees are empowered to contribute to our mission and shape the future of the industry. If you're looking for a fast-paced, dynamic career where your ideas are valued and your growth is prioritized, Turtle is the place for you. Join us and be a part of a company that’s making waves and empowering its people to do extraordinary things every single day! What You'll Do: • Processing quotes for customers requesting bids concerning lighting opportunities, • Place orders in system and provide tracking updates to customers, • Resolve concerns of both vendors and customers when issues arise, • Produce project submittals for approval and review documents when returned/noted, • Maintain, track, and update various data required to track effectiveness of the team and branch, • Provide consistent and pleasant communications What You'll Bring • Must present a positive attitude and excellent communication skills, • Computer skills, such as Microsoft Word, Excel and Outlook are a must, • Must be able to multitask to respond to different customer needs, • High school diploma/GED required, • Experience in quotes and processing purchase orders are a plus, • Organized and creative with the ability to follow directions and meet tight deadlines What We Offer We offer a competitive benefits package that includes: • 401(k) plan, • Health insurance, • Dental insurance, • Vision insurance, • Life insurance, • Paid holidays, • Vacation, • Employee negotiated discounts Who We Are Founded in 1923, Turtle is a fourth-generation, family-owned, and three-generation women-owned business, and one of the nation’s largest independent electrical and industrial distributors. Headquartered in Clark, NJ, our Electrical Distribution division operates 14 branches spanning from coast to coast. It is a significant force in the engineering and procurement of power distribution, automation, lighting, and energy projects, offering integrated services for the industrial and construction markets. Turtle Integrated provides on-site MRO procurement, cost-saving, and spend analytics across the US and in Canada, Puerto Rico, and Mexico. What To Do Next You can begin by filling out our application online. If you want to learn more about Turtle, please visit our website www.turtle.com or our LinkedIn: @Turtle. Turtle is proud to be is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, gender identity or expression, national origin, disability, genetic information, pregnancy, marital status, military or veteran status, or any other protected characteristic as outlined by federal, state, or local laws.

Job Description Turtle is actively searching for an experienced Outside Sales Associate to join our team in Upstate, NY Why Turtle? At Turtle, we’re redefining what it means to be an industry leader in electrical distribution, and we want you to be part of our exciting journey! For over 100 years, we’ve built a reputation for innovation, excellence, and exceptional customer service—and we’re just getting started. We are a diverse, passionate team spread across the US, Canada, Mexico, and Puerto Rico, committed to growth, learning, and creating opportunities for each other. At Turtle, every day is a chance to make a real difference, solve complex challenges, and push the boundaries of what’s possible. We believe in fostering an environment that inspires collaboration and sparks creativity, where employees are empowered to contribute to our mission and shape the future of the industry. If you're looking for a fast-paced, dynamic career where your ideas are valued and your growth is prioritized, Turtle is the place for you. Join us and be a part of a company that’s making waves and empowering its people to do extraordinary things every single day! About the Role The Outside Sales Associate will exhibit a positive, friendly and helpful attitude with customers, have the ability to manage and grow existing accounts, and pursue new business accounts. Pay: $120,000-150,000/uncapped commission What You'll Do • Selling, marketing, promoting, and demonstrating products, • Increasing business by generating sales to new customers and by selling additional products to existing customers, • Pursuing product applications by utilizing personal knowledge, internal specialist/resources, vendor representatives and other available sources., • Establishing and maintaining customer relationships., • Learning and evaluating customer operations to aid in identifying customer objectives, requirements, and preferences., • Processing product quotations in conjunction with inside sales counterparts and provide continuous follow up throughout the completion of the customer’s purchasing cycle., • This position will require travel within an assigned territory. Must be able to operate a motor vehicle and have a current driver’s license and good driving record. What You'll Bring • High School Diploma or equivalent, • Industrial and/or Commercial experience preferred., • Strong leadership and organizational skills., • Excellent negotiation skills, interpersonal skills, and the ability to drive decisions with influence., • Lighting and Gear product and application knowledge preferred, • Excellent written and oral communication skills., • Experience with at least one sales area:, • Industrial, • OEM, • Automation, • Lighting, • Power Distribution, • Commodities, • Energy What We Offer: We offer a competitive benefits package. Some of which include: • 401 (k) plan, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Paid Holidays, • Vacation, • Employee Negotiated Discounts. Who We Are Founded in 1923, Turtle is a fourth-generation, family-owned, and three-generation women-owned business, and one of the nation’s largest independent electrical and industrial distributors. Headquartered in Clark, NJ, our Electrical Distribution division operates 14 branches spanning from coast to coast. It is a significant force in the engineering and procurement of power distribution, automation, lighting, and energy projects, offering integrated services for the industrial and construction markets. Turtle Integrated division provides on-site MRO procurement, cost-saving, and spend analytics across the US and in Canada, Puerto Rico, and Mexico. What To Do Next You can begin by filling out our application online. If you want to learn more about Turtle, please visit our website www.turtle.com or LinkedIn: @Turtle Turtle is proud to be is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, gender identity or expression, national origin, disability, genetic information, pregnancy, marital status, military or veteran status, or any other protected characteristic as outlined by federal, state, or local laws.

Job Description Job Title: HVAC Design & Detailing Specialist Location: Rochester, NY and Central NY (with potential hybrid/on-site work model) Department: Detailing & Coordination Services Reports To: Detailing & Coordination Manager About Us Crosby Brownlie is a family-owned Commercial/ Industrial Mechanical and Design Build contracting firm with decades of experience delivering superior mechanical, plumbing, HVAC, and process piping solutions across commercial and industrial sectors. Our Detailing & Coordination Services team drives project success through detailed 3D modeling, accurate shop drawings, and seamless coordination across disciplines to support efficient construction and fabrication workflows. Position Summary We are seeking a detail-oriented HVAC Design & Detailing Specialist with strong CAD expertise to support our Detailing & Coordination Services team. The ideal candidate will be experienced in piping design within 3D environments, adept at producing fabrication-ready drawings, and skilled in collaborating across engineering, construction, and project management teams. Key Responsibilities • Develop accurate 2D and 3D piping layouts and models using CAD platforms (e.g., AutoCAD, Revit, Fabrication CADmep)., • Produce detailed shop drawings and spool drawings for fabrication and installation., • Participate in clash detection and coordination, identifying potential conflicts early and resolving issues with design and construction teams., • Support BIM modeling and visualization for complex piping and mechanical systems., • Collaborate with engineers, architects, field crews, and project managers to ensure design intent is correctly reflected in deliverables., • Ensure drawings and models comply with company drafting standards, codes, and best practices., • Assist with revisions, updates, and documentation as project designs evolve., • Support pre-construction planning by generating accurate construction documents and material take-offs. Required Qualifications • 2+ years of piping design and detailing experience, preferably in mechanical, process, or industrial project environments., • Proficiency with CAD/BIM tools, such as AutoCAD, Revit, Fabrication CADmep, Navisworks, or similar., • Strong understanding of piping design fundamentals and drafting best practices., • Experience with MEP/Process Piping coordination and detailing., • Excellent communication and teamwork skills, able to coordinate across departments and disciplines., • Keen attention to detail with strong problem-solving capabilities., • Ability to manage multiple priorities and meet project deadlines. Preferred Qualifications • Associate or bachelor’s degree in mechanical engineering technology, Drafting, CAD/BIM, or a related field., • Experience in clash detection workflows and coordination meetings., • Familiarity with construction industry standards and documentation processes., • Knowledge of fabrication and installation requirements for mechanical piping systems. What We Offer • Competitive salary and benefits package $80,000-$110,000+ (depending on qualifications and experience), • Opportunity to work on diverse and challenging projects, • Collaborative, growth-oriented work environment, • Professional development and training opportunities, • Company culture rooted in craftsmanship, integrity, and teamwork How to Apply (resume required) Send your résumé, cover letter, and portfolio samples (if available) \nCompany Description Great time to get involved with this rapidly growing company! Great time to get involved with this rapidly growing company!

Job Description Steel fabrication consists of bolting and/or welding parts to main steel members such as beams and columns per the design drawing. Material are move with overhead cranes and forklifts. We prime paint finished products and load trucks for delivery. CNC machines include Ocean Clipper II angle line to process angle iron, Hypertherm Plasma table that process plate parts, Ficep FRC plasma line that cuts beams, tubes and misc shapes, (2) Ficep drill lines with band saws. We also fabricated light industrial steel such as stairs and railings. We are seeking a detail-oriented CNC Machine Operator to operate and maintain CNC fabrication equipment used in structural steel processing. This role is responsible for setting up, operating, and monitoring CNC machinery to cut, drill, and process steel components according to engineering drawings and production specifications. Key Responsibilities • Operate CNC machinery including:, • Angle lines (Ocean Clipper II), • Plasma tables (Hypertherm), • Beam drill lines and band saws (Ficep systems), • Load and position steel materials for machining operations, • Interpret blueprints, shop drawings, and CNC programs, • Monitor machine performance and make adjustments as needed, • Perform routine inspections to ensure accuracy and quality standards, • Move materials using forklifts and overhead cranes safely, • Assist with basic machine maintenance and troubleshooting, • Maintain a clean and safe work environment, • Follow all OSHA and company safety procedures Qualifications • Prior experience operating CNC machinery in a manufacturing or steel fabrication environment, • Ability to read and interpret technical drawings and blueprints, • Strong attention to detail and measurement accuracy, • Mechanical aptitude and problem-solving skills, • Experience with structural steel or heavy industrial materials preferred Preferred Certifications • Forklift Operator Certification, • Overhead Crane Certification, • OSHA 10 or OSHA 30 Safety Certification Physical Requirements • Ability to lift up to 50+ lbs, • Standing for extended periods, • Working around heavy machinery in a shop environment Why Join Us • Work with advanced CNC equipment and modern fabrication systems, • Stable, long-term opportunity with growth potential, • Team-oriented, safety-focused environment, • Be part of a respected AISC-certified steel fabricator\nCompany Description Join Rochester Structural LLC, a leader in structural steel fabrication and erection with a strong legacy since 1982 and an AISC-certified fabrication facility in Rochester, NY. We are dedicated to quality, safety, and craftsmanship on every project — from industrial manufacturing and healthcare facilities to high-tech and commercial construction. Our team works with advanced CNC equipment and modern fabrication processes to deliver precision and excellence on every job. Join Rochester Structural LLC, a leader in structural steel fabrication and erection with a strong legacy since 1982 and an AISC-certified fabrication facility in Rochester, NY. We are dedicated to quality, safety, and craftsmanship on every project — from industrial manufacturing and healthcare facilities to high-tech and commercial construction. Our team works with advanced CNC equipment and modern fabrication processes to deliver precision and excellence on every job.

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview We are seeking a Managing Mechanical Engineer to join a multi-disciplinary team in our Mechanical Department. We offer full service in-house architecture/engineering design capabilities and typically work on a diverse array of projects including Higher Education, Municipal Facilities, Industrial, Design-build, Aviation and Healthcare. Responsibilities include working on all phases of projects such as client relationships, design, specifications, project team coordination, construction documents, code analysis and consultant interaction. Required Knowledge, Skills & Abilities • 10+ years of related mechanical/HVAC design and project management experience., • Bachelor’s degree in mechanical engineering, • Professional licensure PE is preferred, • Comprehensive understanding of design and construction documents., • Proficiency in CADD & REVIT., • Knowledge of building codes., • Ability to succeed in small and large multi-disciplinary team environments., • Ability to set deadlines, assign resources, monitor/summarize project progress., • Good graphic, communications (verbal and written) and presentation skills., • Self-motivated with ability to lead small and large project teams and multiple projects from concept to construction., • Higher Education and Healthcare experience, • Experience working with both private and public clients Estimated Compensation Range and Benefits $100,000 - $150,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description We are currently looking for a P & C Engineer with a minimum of 5 years of experience in protection and control system detailed design, cost estimating, and bid document preparation for commercial, industrial, generation, renewables, and utility power systems. Duties • Create/modify one-lines, three-lines, control schematics, wiring diagrams, relay panel arrangements, and cable lists for substations, relay settings and configuration files., • Design auxiliary AC and DC power systems., • Create/modify technical specifications for major equipment, such power transformers, power circuit breakers, control house, panel construction specification and other high-voltage substation related materials;, • Coordinate with and provide technical assistance to SCADA engineers, substation physical engineers, and control design staff in order to fully develop system integration of protection, control, and monitoring systems;, • Perform basic calculations such as voltage drop, CT burden and saturation, lighting, and short circuit with minimal supervision;, • Apply field mark-ups of project as-built drawings with minimal supervision;, • Assist project manager to develop scope of work and conceptual design for the projects;, • Communicate and coordinate project activities with project manager, client, and others as needed;, • Provide leadership, guidance and instruction to less experienced staff members;, • Take personal responsibility for the quality and accuracy of one's work;, • Panel construction specifications (panel and interconnect wiring as well as panel layouts and elevations)., • Comfortable evaluating/reviewing control features, and communication/protocol aspects of protective relays, RTU’s, LTC Controllers, and other equipment as well as relay setting coordination., • Aid in testing and commissioning as needed pertaining to system startups and functional checks. Requirements • A Bachelor’s Degree in Electrical Engineering or Electrical Engineering Technology., • 5 or more years of experience in protection and control system design, cost estimating, and bid document preparation for medium voltage electrical power projects., • A PE license from a US State (NC and NY) is preferred., • Successful track record designing Protection and Control Systems., • Knowledge of Institute of Electrical and Electronic Engineers (IEEE), NERC, NEC, NESC, NEMA, and ANSI standards used in designing substation is critical., • Experience with telecommunications, protective relaying, and automation (SCADA) is required., • Desired knowledge in low voltage coordination and arc flash studies., • Familiarity with Schweitzer Engineering Laboratories, General Electric and Basler equipment., • Periodic travel, ability to visit project sites., • Desired software knowledge in:, • ASPEN or similar, • Doble, • AutoCAD, • SKM, • ETAP Salary Range: $90,000 - $117,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job DescriptionEncorus Group has recently opened our newest office in Rochester, NY, and we’re seeking a Senior Electrical Engineer to lead its continued development. This role goes beyond technical expertise—it’s a unique leadership opportunity to influence the growth, culture, and direction of a high-performing local team while collaborating closely with our established Buffalo office. We’re looking for an engineer with extensive experience in power infrastructure for industrial facilities, particularly in medium- and low-voltage systems. Our projects range from large-scale power generation facilities to control level distribution, offering a diverse and engaging workload. As a consulting firm, we support clients across a wide spectrum of industries and facility types—from state-of-the-art manufacturing spaces to older industrial plants—making this an ideal role for someone who thrives on variety and values client interaction. The ideal candidate is technically strong, proactive, and client-focused, with a passion for solving complex challenges, mentoring others, and contributing to a collaborative, fast-paced, and learning-driven environment. Responsibilities: • Define project requirements, delegate tasks to staff, and oversee projects through to completion, ensuring the accuracy and completeness of deliverables., • Serve as a project manager, handling correspondence, estimates, schedules, material lists, design considerations, and drawings., • Review and redline existing drawings, maintain project documentation, and coordinate project files., • Collaborate with internal teams and external professionals, including architects and engineers, to ensure seamless design integration., • Independently manage projects of moderate size and complexity while supporting senior engineers on larger, more intricate assignments., • Assist project managers with correspondence, estimates, schedules, material lists, design concepts, calculations, and documentation, ensuring compliance with customer, corporate, and industry standards., • Apply industry best practices and company standards to oversee the development of calculations, project drawings, and specifications., • Mentor and guide entry-level engineers, providing technical development, progress reviews, and coaching., • Coordinate with internal and external partners—including cross-discipline teams, construction teams, vendors, fabricators, and clients—to address electrical-related challenges., • Execute advanced engineering tasks that require creativity and critical thinking, solving unique electrical challenges that may have limited or no direct code guidance.Qualifications:, • Bachelor’s degree in electrical engineering, • 10+ years of electrical engineering and design experience, with a preference for consulting experience., • Professional Engineer (PE) registration., • Strong background in power infrastructure for industrial facilities, including experience with medium- and low-voltage systems, • Experience and enthusiasm for working across a broad range of project types and power distribution levels., • Proficiency using ETAP or SKM, Visual or similar analytical software., • Proficiency working with details and designing with AutoCAD and Revit drafters, • Strong communication and teamwork skills., • Ability to comply with company drug screening, including pre-employment tests., • A valid driver's license, along with the ability to travel locally and occasionally out of state.Pay Range: The salary range for this position is $100,000 - $125,000 annually. Actual compensation will be based on the candidate’s knowledge, skills, and experience. Encorus Group is an equal opportunity employer (EOE/AA Disability/Veteran), committed to fair and equitable compensation. Join Us! At Encorus, we value innovation, collaboration, and professional development. We offer a competitive benefits package, opportunities for career advancement, paid training, flexible scheduling, and hybrid work options depending on project needs and team collaboration. If you’re ready to take your career to the next level and make a significant impact in electrical engineering, we want to hear from you! Visit our careers page at https://encorus.com/about-us/careers/ to learn more and to apply. Powered by JazzHR jzcekULU65

Job Description About the Role This team member will play a critical role within our MEP team, leading electrical system designs, performing power distribution analysis, selecting equipment, and managing the preparation of engineering documents. The role involves collaborating with senior engineers, mentoring junior staff, and ensuring compliance with industry standards, energy codes, and best practices for power, lighting, lighting control, and fire alarm systems. Key Responsibilities • Design of electrical systems for commercial, institutional, and industrial buildings., • Perform load calculations, short-circuit analysis, and voltage drop calculations for system design., • Select and specify electrical distribution equipment, lighting systems, and controls., • Coordinate fire alarm system specifications and layouts with manufacturers and systems integrators., • Utilize AutoCAD and Revit to develop and refine electrical design layouts and construction drawings., • Research and ensure compliance with building codes, NFPA, NEC, and energy efficiency standards., • Manage projects independently or alongside senior engineers, ensuring deadlines and budgets are met., • Assist in client communications, site visits, and coordination with multidisciplinary teams., • Prepare technical reports, engineering specifications, and cost estimates. This position is open to the following office locations; please indicate which office you would prefer when filling out an application: • Binghamton, NY, • Horseheads, NY, • Rochester, NY, • Towanda, PA, • Williamsport, PA Qualifications • 5+ years of experience in electrical engineering, power distribution, or a related field., • Bachelor’s degree in architectural engineering, electrical engineering technology, or electrical engineering preferred. (Associates in related field considered with experience)., • Experience with CAD/Drafting software such as AutoCAD or Revit., • Exposure to software such as ETAP or AGI32 would be beneficial but not required., • Strong verbal and written communication skills with the ability to collaborate across teams., • Knowledge of power distribution, lighting, and low voltage building systems., • EIT preferred. Support available for employees pursuing PE licensure. Benefits • Paid Holidays, • PTO, • Dental, Health, and Vision Insurance, • FSA/ HSA, • Life Insurance, • 401(K) plan, • Continuing Education Support About HUNT HUNT is a full-service A/E Firm with offices located in Albany, NY, Binghamton, NY, Horseheads, NY, Rochester, NY, Towanda, PA, and Williamsport, PA. As a firm, our vision is to build vibrant communities by empowering creativity and partnership. We have accomplished this to date by being an entrusted partner to our clients/communities, providing full-service design that is innovative, practical and community focused. In addition, we offer a family friendly, flexible workplace that aims to encourage long, successful, sustainable careers through a variety of life stages. We are excited to welcome you to apply to this strong culture and hope that your values align with those of the firm, which will further enhance our culture even as we look toward targeted growth opportunities. HUNT is an Equal Opportunity Employer (EOE). Salary commensurate with experience and qualifications.

Job DescriptionDescription: ABOUT US Since 1935, Ferguson Electric has been providing the Western New York region with exceptional electric repair and construction services. We have the experience and skill to be our customer’s “connection to quality”. Our professional team has handled a majority of the construction and service contracts for the commercial and industrial facilities in the area. We have the skill, experience, and the dedication to properly address all electrical repair and construction needs. ABOUT THE ROLE Ferguson Electric’s Estimators are responsible for producing comprehensive estimates for commercial, industrial, and institutional projects. Estimators collaborate closely with project managers and other electrical construction professionals to develop accurate and timely estimates and support the development of complete project proposals. WHAT YOU WILL DO • Acquire bid documents, • Attend pre bid meetings and review specifications and drawings to determine the scope of work., • Perform accurate takeoffs, • Set up estimates to allow for advanced manipulation of data, enabling the generation of estimate breakdowns for bid analysis, scheduling input, and bid form requirements. Acquire bid documents, • Submit Requests for Information (RFI), • Process Addenda, • Coordinate with administrative staff for Insurances, Bid Bonds, and Bid Form completion, • Engage with subcontractors and suppliers, • Use estimating software proficiently, • Vet proposals and Bills of Materials for completeness, • Project a professional image to clients and colleagues, • Ensure bid accuracy, • Identify and anticipate potential risks, • Determine lead time for non-stock and special-order items known at bid time, • Other duties may be assigned based on needs of various divisions across the company. ABOUT YOUR QUALIFICATIONS • Strong interpersonal skills, with an ability to communicate effectively in writing and verbally, • Highly organized with strong attention to detail and a commitment to quality., • Continuous improvement mindset when it comes to evaluating systems and processes., • Desire to work in a fast-paced environment in a rapidly changing industry., • Solid math, critical thinking, and business writing skills., • Ability to interpret computerized cost data., • Ability to organize, read and interpret blueprints and/or engineering design drawings., • Ability to work under time pressure and adapt to changing requirements with a positive attitude., • Self-starter with the ability to work effectively., • Proficiency with Microsoft Office Suite/Microsoft 365, specifically Word, Excel, and Outlook. Ferguson Electric recognizes the value of diversity in our workforce. We are committed to equal opportunity. We consider all qualified employment applicants without regard to race, religion, color, gender, age, national origin, sexual orientation, gender identity, partnership status, protected veteran status, disability, or any other status protected by federal, state, or local law. Individuals who hold legal work authorization applicable to employment at Ferguson Electric in the United States will be considered without regard to citizenship/alienage. Requirements: ABOUT YOUR QUALIFICATIONS Strong interpersonal skills, with an ability to communicate effectively in writing and verbally Highly organized with strong attention to detail and a commitment to quality. Continuous improvement mindset when it comes to evaluating systems and processes. Desire to work in a fast-paced environment in a rapidly changing industry. Solid math, critical thinking, and business writing skills. Ability to interpret computerized cost data. Ability to organize, read and interpret blueprints and/or engineering design drawings. Ability to work under time pressure and adapt to changing requirements with a positive attitude. Self-starter with the ability to work effectively. Proficiency with Microsoft Office Suite/Microsoft 365, specifically Word, Excel, and Outlook.

Job Description Turtle is actively searching for an experienced Inside Sales Associate to join our team in Upstate NY. Why Turtle? At Turtle, we’re redefining what it means to be an industry leader in electrical distribution, and we want you to be part of our exciting journey! For over 100 years, we’ve built a reputation for innovation, excellence, and exceptional customer service—and we’re just getting started. We are a diverse, passionate team spread across the US, Canada, Mexico, and Puerto Rico, committed to growth, learning, and creating opportunities for each other. At Turtle, every day is a chance to make a real difference, solve complex challenges, and push the boundaries of what’s possible. We believe in fostering an environment that inspires collaboration and sparks creativity, where employees are empowered to contribute to our mission and shape the future of the industry. If you're looking for a fast-paced, dynamic career where your ideas are valued and your growth is prioritized, Turtle is the place for you. Join us and be a part of a company that’s making waves and empowering its people to do extraordinary things every single day! About the Role The Inside/Counter sales Associate is responsible for generating sales, providing product support, and maintaining strong relationships with customers such as electrical contractors, industrial clients, and commercial buyers. This role involves quoting products, processing orders, and collaborating with outside sales teams to increase revenue. What You'll Do • Respond to customer inquiries via phone and email regarding various products and solutions., • Prepare and deliver price quotations, bids, and proposals., • Assist customers with product selection, availability, and alternatives., • Process sales orders, returns, and product exchanges., • Provide technical product guidance on electrical equipment, components, and systems., • Maintain and grow relationships with electrical contractors, OEMs, and industrial clients., • Coordinate with purchasing, warehouse, and logistics teams to ensure timely delivery., • Support outside sales representatives by managing accounts and identifying upselling opportunities., • Greet customers and provide friendly, professional service at the sales counter., • Stay updated on new electrical products, codes, and industry trends. What You'll Bring • 3+ years relevant experience required, • Ability to negotiate and be persuasive, • Strong attention to detail, • Work independently and within a team, • Highly effective interpersonal and communication skills What We Offer: We offer a competitive benefits package. Some of which include: • 401 (k) plan, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Paid Holidays, • Vacation, • Employee Negotiated Discounts. Who We Are Founded in 1923, Turtle is a fourth-generation, family-owned, and three-generation women-owned business, and one of the nation’s largest independent electrical and industrial distributors. Headquartered in Clark, NJ, our Electrical Distribution division operates 14 branches spanning from coast to coast. It is a significant force in the engineering and procurement of power distribution, automation, lighting, and energy projects, offering integrated services for the industrial and construction markets. Turtle Integrated division provides on-site MRO procurement, cost-saving, and spend analytics across the US and in Canada, Puerto Rico, and Mexico. What To Do Next You can begin by filling out our application online. If you want to learn more about Turtle, please visit our website www.turtle.com or LinkedIn @Turtle Turtle is proud to be is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, gender identity or expression, national origin, disability, genetic information, pregnancy, marital status, military or veteran status, or any other protected characteristic as outlined by federal, state, or local laws.

Job Description At McFarland Johnson (MJ), you’ll own your future. We're a 100% employee-owned firm with 80 years of experience delivering innovative engineering, planning, environmental, technology, and construction solutions that make a lasting impact on the clients and communities we serve. Certified as a Great Place to Work, our employee-owners describe MJ's culture as collaborative, people-focused, and supportive. Join us, and help shape the future of infrastructure together. We’re looking for a Senior Mechanical Engineer to join our growing Facilities division in Pittsford, NY. This is more than just a job – it’s a chance to shape your career, grow alongside a collaborative team, and help design the future of infrastructure solutions across the country. Position Summary The Senior Mechanical Engineer will lead the design and analysis of HVAC, plumbing, and mechanical building systems for a diverse range of commercial, industrial, and institutional projects. In this role, you will manage all phases of project delivery, from planning and design to construction administration. Additionally, you will serve as the primary client contact and provide technical mentorship to junior staff. Key Responsibilities • Lead the design and analysis of HVAC, plumbing, mechanical, and building systems for complex infrastructure and facilities projects., • Serve as the primary point of contact for clients, managing relationships and ensuring project goals are met on time and within budget., • Oversee all project phases, including planning, design, specifications, construction documents, bidding, and construction administration., • Mentor and provide technical guidance to junior engineers and project staff., • Coordinate across multidisciplinary teams, including electrical, architectural, and civil disciplines., • Conduct code analysis and ensure compliance with applicable standards and regulations. Qualifications & Skills • Bachelor's Degree in Mechanical Engineering or related field required., • PE licensure preferred; EIT considered for candidates actively pursuing licensure., • 6 to 12 years of mechanical design experience in commercial, industrial, and institutional building facilities., • Strong working knowledge of Revit MEP, AutoCAD, and MS Office., • Demonstrated ability to manage project budgets, schedules, and client relationships., • Superior organizational and interpersonal skills with the ability to work effectively across multidisciplinary teams., • Sustainable design experience with LEED accreditation a plus. Why Join Us? • Career Growth: Accelerate your professional career with opportunities to lead, learn, and expand your expertise., • Collaborative Culture: Work alongside multidisciplinary teams that thrive on creativity, support, and teamwork. Collaborative is the most frequent word used to describe MJ’s culture in the annual employee survey., • Employee Ownership: As a 100% ESOP, your contributions directly shape our shared success – you own your future., • Innovation & Impact: Work on projects that push boundaries, drive sustainability, and create real-world solutions., • Professional Development: From mentorship, ongoing technical training, and conferences we invest in your growth every step of the way., • Work-Life Balance: Enjoy flexible schedules, generous PTO, and a culture that values balance so you can thrive both professionally and personally., • Shape the next generation: For experienced professionals, MJ offers the chance to mentor emerging talent, share your expertise, and leave a lasting legacy in the industry. Benefits & Perks • Competitive base salary starting at $45/hr plus performance-based incentive payment plan/bonus structure, • Comprehensive benefits package, including medical, dental, and vision coverage., • Generous Paid Time Off, including Parental Leave., • Company-funded ESOP + 401(k) employer match., • Ongoing technical training and professional development opportunities. Join Us and Make a Difference Join a team where your work has purpose, your ideas are valued, and your growth is personal. Apply today and become a part of a company where you can #ownyourfuture.

Job Description K&A Power Group– is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Principal Protection & Controls Engineer to join our team at K&A Engineering in Binghamton, New York. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • Lead overall protection design for all capital projects and define relay protection functionality/scheme in accordance with Avangrid TM standards, • Perform detailed review of all existing protection schemes present in the subject area to incorporate into new design. Special areas of focus are anti-islanding schemes, generator intertie settings, SPS schemes, etc. (anything outside of normal). Basically, the goal is to ensure that we don’t remove required protections already in place or at least be aware of how things work today before we modify existing schemes., • Review contractor provided relay settings, logic diagrams (including Goose messaging diagrams), and operational descriptions for all capital projects, • Review/perform area relay coordination and determine what level of area coordination is required/needed (based on changes in fault duty and overall system performance due to the project changes), • Review contractor provided relay settings for all temporary builds and construction sequence steps including mobile settings, • Review/provide input to Customer’s Aspen model changes as required for individual capital projects, • Provide design support during implementation/testing and commissioning of the above the items, • Provide feedback to Customer on existing TM standards and help refine the Customer’s design practices, • Ensure all as-built documentation gets filed appropriately in the plant filing location at Customer, • Lead overall automation and integration design for all capital projects, • Review/design SCADA point indexes, • Review contractor provided HMI screens/settings for all capital projects, • Review/design Protection settings and settings basis, • Review/design IED Data Maps, • Review/create substation level operational descriptions (HMI operation, relay front panel operation, etc.), • Review automated maintenance data gathering (Digital Substation Data) point lists, • Track all required licenses/firewalls and key automation and integration deliverables needed for project implementation, • Provide design support during implementation/testing and commissioning of the above items, • Perform constructability review and ensure adequate automation and integration coverage is available for each outage step (SCADA etc.) What we’re looking for: • Bachelor’s Degree in Electrical Engineering (BSEE) with a strong background and knowledge of all utilities engineering disciplines, • 15 years or more of relay/protection settings engineering experience, • Proficient in Microsoft Project, Excel, PowerPoint, and Word, • Proven experience in Substation Design should include general arrangement, electrical equipment plans, elevation and section views, Equipment cable trays, cable design, conduit fill calcs, rigid bus calcs, • Professional level skills in MicroStation, AutoCAD, • IEC 61850/Goose experience required, • PE Required, • In office- Must be local to New York Pay Range: $120,000-$135,000/annually Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with Company Match), • Lifestyle Spending Account (LSA), • Paid Parental Leave, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance, • Long-Term Disability, Short-Term Disability, and Life Insurance, • EAP (Employee Assistance Program), • Relocation Assistance Check out our career page for more information! The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job Description Key Responsibilities Contract Administration & Compliance • Contract Lifecycle Management: Draft, review, and manage contracts for clients and technical subconsultants, ensuring all terms align with company policy., • Compliance Oversight: Verify that all project documentation (including technical files and insurance certificates) meets specific contractual obligations before payment processing., • Document Control: Maintain a rigorous filing system for all executed agreements, amendments, and work orders to ensure audit readiness. Financial & Accounting Operations • Accounts Payable/Receivable: Process incoming invoices from vendors and subconsultants; prepare and issue client billings based on project milestones or hourly logs., • Payroll: Preparation of in-house payroll. Required Qualifications • Education: HS Diploma. AS Degree in accounting or Finance a plus. We will train, • Experience: Any related experience in an accounting or contracting is a plus but not required., • Technical Proficiency: Microsoft Office, Excel preferred. Any accounting software., • Attention to Detail: Exceptional ability to identify discrepancies in complex contracts or financial spreadsheets. Very good organization skills\nCompany Description Join Rochester Structural LLC, a leader in structural steel fabrication and erection with a strong legacy since 1982 and an AISC-certified fabrication facility in Rochester, NY. We are dedicated to quality, safety, and craftsmanship on every project — from industrial manufacturing and healthcare facilities to high-tech and commercial construction. Our team works with advanced CNC equipment and modern fabrication processes to deliver precision and excellence on every job. Join Rochester Structural LLC, a leader in structural steel fabrication and erection with a strong legacy since 1982 and an AISC-certified fabrication facility in Rochester, NY. We are dedicated to quality, safety, and craftsmanship on every project — from industrial manufacturing and healthcare facilities to high-tech and commercial construction. Our team works with advanced CNC equipment and modern fabrication processes to deliver precision and excellence on every job.

Job DescriptionDescription: Since 1935, Ferguson Electric has been providing the Western New York region with exceptional electric repair and construction services. We have the experience and skill to be our customer’s “connection to quality”. Our professional team has handled a majority of the construction and service contracts for the commercial and industrial facilities in the area. We have the skill, experience, and the dedication to properly address all electrical repair and construction needs. ABOUT THE ROLE Ferguson Electric’s Safety Professional, reporting to the Director of Safety, will lead the development, implementation, and enforcement of Ferguson Electric’s safety program to ensure safe operations across all projects and company activities. This role focuses on fostering a proactive culture of safety, overseeing field inspections and training initiatives, and driving compliance with federal, state, county, and local safety regulations all while strongly upholding and promoting the organization's core values. WHAT YOU WILL DO Safety Program Leadership: o Lead the development, implementation, and enforcement of company safety policies, procedures, and programs in collaboration with the Director of Safety. o Oversee the maintenance and enhancement of the safety management system, including updating safety manuals, documents, and customer portals. o Establish, track, and report on safety goals, objectives, and key performance indicators to senior leadership. Field Safety Oversight: o Direct regular site inspections to ensure compliance with safety standards, identify potential hazards, and recommend corrective measures. o Guide project managers and field teams in developing and implementing project-specific safety plans and procedures. o Supervise the proper use, maintenance, and procurement of personal protective equipment (PPE) on job sites. Training and Education: o Develop and deliver comprehensive safety training programs for employees, subcontractors, and other stakeholders. o Mentor field staff on OSHA standards, company safety policies, and industry best practices. · o Lead awareness initiatives through toolbox talks, safety briefings, and ongoing education campaigns. · Compliance and Documentation: o Ensure full compliance with Occupational Safety and Health Administration (OSHA) standards and other applicable regulations. o Oversee the maintenance of accurate records for safety inspections, incidents, and training sessions. o Prepare and review project-specific safety plans, reports, and documentation for clients and regulatory agencies. Incident Response and Investigation: o Lead investigations of workplace incidents, near-misses, and accidents, determining root causes and implementing corrective actions. o Document incident reports and communicate findings to the Director of Safety, senior leadership, and relevant stakeholders. Collaboration: o Partners with project managers, field crews, and subcontractors to cultivate a culture of safety and accountability. o Coordinate with the Director of Safety and cross-functional teams to address safety concerns and drive continuous improvements. o Communicate effectively with internal teams and external partners to align safety objectives and best practices. Requirements: ABOUT YOUR QUALIFICATIONS • Education and Experience:, • Associate’s degree in Occupational Health and Safety, Environmental Health, or a related field; Bachelor’s degree preferred., • 5+ years of occupational health and safety experience, preferably in the construction or electrical contracting industry with at least 2 years in a leadership role., • OSHA 10 or 30-hour certification in Construction Safety is highly desirable., • Technical Skills:, • Proficiency in Microsoft Office Suite (Word, Excel, Outlook) and familiarity with safety management software or systems., • Basic knowledge of asset management/work order systems or GIS applications is a plus., • Soft Skills:, • Strong communication skills, both oral and written, to engage with employees, subcontractors, and management., • Excellent organizational and time management skills to handle multiple tasks and priorities., • Ability to work collaboratively in a team environment and build rapport with diverse stakeholders., • Proactive problem-solving skills with a focus on attention to detail and accountability., • Other Requirements:, • Working knowledge of OSHA standards and construction safety practices., • Ability to conduct field inspections and training sessions in various work environments., • Willingness to travel to job sites as needed., • Attributes: Strategic thinker, detail-oriented, proactive, and able to thrive in a fast-paced environment.

Job DescriptionSenior Mechanical Estimator Location: Rochester, NY Employment Type: Full-Time Salary: $80,000 – $120,000 per year About the Organization A well-established employee-owned mechanical contracting and construction company is seeking an experienced Senior Mechanical Estimator to join its estimating team. The organization specializes in delivering complex industrial, institutional, laboratory, healthcare, and commercial construction projects. With a strong focus on quality, collaboration, and professional growth, the company offers employees the opportunity to contribute to high-profile projects while building long-term careers in a supportive environment. About the Role The Senior Mechanical Estimator will be responsible for preparing accurate and competitive estimates for large-scale mechanical and plumbing construction projects. This position supports Design-Build, Design-Assist, and Hard Bid opportunities and works closely with project teams, subcontractors, and suppliers throughout the estimating process. Key Responsibilities Prepare complete Mechanical and Plumbing estimates for projects exceeding $10 million. Develop estimates for Design-Build, Design-Assist, and Hard Bid projects. Produce accurate estimates from schematic design documents. Prepare comparative estimates based on multiple design alternatives. Develop subcontractor scopes, negotiate pricing, and issue subcontracts. Solicit and evaluate vendor and supplier pricing while negotiating buyout costs. Review project specifications, drawings, and contract documents. Perform material takeoffs, prepare purchase orders, and support project controls. Coordinate with project managers and other stakeholders throughout the estimating process. Mentor and provide guidance to junior estimators. Required Qualifications Extensive experience estimating Mechanical Piping, Plumbing, and Heavy Construction projects. Proven success in a Hard Bid estimating environment. Experience preparing complete Mechanical and Plumbing estimates for projects valued at $10 million or more. Strong understanding of construction contracts, front-end specifications, and project documentation. Experience negotiating with subcontractors, vendors, and suppliers. Ability to manage multiple deadlines and work independently. Excellent communication, organizational, and problem-solving skills. HVAC ductwork estimating experience is preferred but not required. Willingness to relocate for project assignments, if necessary. Compensation & Benefits Competitive salary: $80,000 – $120,000 per year Employee Stock Ownership Plan (ESOP) Annual performance bonus 401(k) with employer contribution Medical, dental, and life insurance Paid time off and paid holidays Professional training and career development opportunities Relocation assistance available Powered by JazzHR xxGeZja5SW

Job DescriptionJob title: Senior Mechanical Estimator Location: Rochester, NY Employment Type: Full-Time Salary: $80,000 – $120,000 per year About the Organization A well-established employee-owned mechanical contracting and construction company is seeking an experienced Senior Mechanical Estimator to join its estimating team. The organization specializes in delivering complex industrial, institutional, laboratory, healthcare, and commercial construction projects. With a strong focus on quality, collaboration, and professional growth, the company offers employees the opportunity to contribute to high-profile projects while building long-term careers in a supportive environment. About the Role The Senior Mechanical Estimator will be responsible for preparing accurate and competitive estimates for large-scale mechanical and plumbing construction projects. This position supports Design-Build, Design-Assist, and Hard Bid opportunities and works closely with project teams, subcontractors, and suppliers throughout the estimating process. Key Responsibilities Prepare complete Mechanical and Plumbing estimates for projects exceeding $10 million. Develop estimates for Design-Build, Design-Assist, and Hard Bid projects. Produce accurate estimates from schematic design documents. Prepare comparative estimates based on multiple design alternatives. Develop subcontractor scopes, negotiate pricing, and issue subcontracts. Solicit and evaluate vendor and supplier pricing while negotiating buyout costs. Review project specifications, drawings, and contract documents. Perform material takeoffs, prepare purchase orders, and support project controls. Coordinate with project managers and other stakeholders throughout the estimating process. Mentor and provide guidance to junior estimators. Required Qualifications Extensive experience estimating Mechanical Piping, Plumbing, and Heavy Construction projects. Proven success in a Hard Bid estimating environment. Experience preparing complete Mechanical and Plumbing estimates for projects valued at $10 million or more. Strong understanding of construction contracts, front-end specifications, and project documentation. Experience negotiating with subcontractors, vendors, and suppliers. Ability to manage multiple deadlines and work independently. Excellent communication, organizational, and problem-solving skills. HVAC ductwork estimating experience is preferred but not required. Willingness to relocate for project assignments, if necessary. Compensation & Benefits Competitive salary: $80,000 – $120,000 per year Employee Stock Ownership Plan (ESOP) Annual performance bonus 401(k) with employer contribution Medical, dental, and life insurance Paid time off and paid holidays Professional training and career development opportunities Relocation assistance available

Job Description ob Summary We are seeking a skilled Structural Steel Fabricator responsible for assembling, fitting, welding, and preparing structural steel components according to detailed shop drawings and engineering specifications. This role plays a key part in producing beams, columns, stairs, railings, and structural assemblies used in construction projects. Key Responsibilities • Fabricate structural steel components including beams, columns, stairs, and railings, • Fit-up and assemble steel parts using bolting and welding techniques, • Read and interpret blueprints, shop drawings, and fabrication plans, • Perform layout, measurement, cutting, and assembly of steel materials, • Operate hand tools, power tools, and fabrication equipment, • Assist with welding operations as required (MIG, Stick, or similar), • Move materials using overhead cranes and forklifts safely, • Prime and prepare finished steel products for shipment, • Load completed materials onto trucks for delivery, • Ensure all work meets quality and dimensional standards, • Maintain a clean and safe work environment Qualifications • Previous experience in structural steel fabrication or metal fabrication preferred, • Ability to read and interpret blueprints and technical drawings, • Basic welding knowledge and fabrication skills, • Strong attention to detail and accuracy, • Ability to work independently and as part of a team, • Experience with measuring tools and fabrication equipment Preferred Certifications • Forklift Operator Certification, • Overhead Crane Certification, • Welding certifications (AWS or equivalent), • OSHA 10 or OSHA 30 Safety Certification Physical Requirements • Ability to lift up to 50+ lbs regularly, • Standing, bending, and working in a shop environment, • Comfortable working around industrial equipment and machinery Why Join Us • Work on high-profile commercial and industrial steel projects, • Opportunities to grow your fabrication and welding skillset, • Stable employment with a reputable AISC-certified company, • Supportive, safety-first team environmentCompany DescriptionJoin Rochester Structural LLC, a leader in structural steel fabrication and erection with a strong legacy since 1982 and an AISC-certified fabrication facility in Rochester, NY. We are dedicated to quality, safety, and craftsmanship on every project — from industrial manufacturing and healthcare facilities to high-tech and commercial construction. Our team works with advanced CNC equipment and modern fabrication processes to deliver precision and excellence on every job.Join Rochester Structural LLC, a leader in structural steel fabrication and erection with a strong legacy since 1982 and an AISC-certified fabrication facility in Rochester, NY. We are dedicated to quality, safety, and craftsmanship on every project — from industrial manufacturing and healthcare facilities to high-tech and commercial construction. Our team works with advanced CNC equipment and modern fabrication processes to deliver precision and excellence on every job.

iWorld Professionals is seeking a Construction Project Manager for our client a premier construction company in Rochester NY. If you have experience in managing large, complex construction projects, this position is for you! This position is ideal for a project manager who enjoys taking ownership of their projects, building strong relationships with clients and subcontractors, and leading teams through complex construction challenges. Construction Project Manager Responsibilities: As a Construction Project Manager, you will take responsibility for the overall financial and operational success of assigned projects while coordinating closely with owners, architects, engineers, superintendents, subcontractors, suppliers, and internal project teams. • Manage commercial construction projects from planning and preconstruction through completion and closeout, • Oversee multiple projects and project teams simultaneously, • Develop, manage, and maintain project budgets, schedules, forecasts, and cost controls, • Monitor project financial performance and take action to maintain profitability, • Coordinate project schedules with field leadership, subcontractors, suppliers, and clients, • Lead owner, architect, contractor, and project coordination meetings, • Manage relationships with owners, architects, engineers, subcontractors, vendors, and other project stakeholders, • Review drawings, specifications, contracts, scopes of work, and other project documentation, • Manage subcontractor procurement, bid processes, contract negotiations, and subcontract administration, • Review and approve change orders and monitor their impact on project cost and schedule, • Manage RFIs, submittals, ASIs, drawing logs, transmittals, pay applications, and other project documentation, • Oversee project billing, job cost reporting, forecasting, and financial controls, • Coordinate with Superintendents and field teams to ensure successful project execution, • Ensure work meets established quality standards, building codes, project specifications, and contractual requirements, • Manage project closeout, punch lists, turnover documentation, and final completion Construction Project Manager Requirements: • 5+ years of progressively responsible construction project management experience, • Experience managing commercial, industrial, institutional, healthcare, educational, municipal, or other complex construction projects, • Demonstrated experience managing multi-million-dollar projects, • Strong understanding of construction scheduling, budgeting, estimating, cost controls, and project financials, • Experience managing subcontractors, vendors, field teams, and design professionals, • Knowledge of construction contracts, change orders, RFIs, submittals, pay applications, and project closeout procedures, • Ability to read and interpret construction drawings and specifications, • Strong understanding of project risk management and problem resolution, • Experience with construction project management and scheduling software, • Ability to work on-site in Rochester NY. Base Salary $120,000 - $150,000 plus comprehensive benefit package. Apply today to iWorld Professionals for immediate confidential consideration.

Alston Construction offers a diverse background of general contracting, construction management and design-build experience of industrial, commercial, healthcare, education, retail and government projects. Degree in Construction Management, Engineering or related field and appropriate experience suc

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Dental insurance, • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off, • Vision insurance Job Description Position Title: Fire & Water Restoration Technician Reports To: Director of Mitigation Department: Mitigation Classification: Full-Time, Non-Exempt Salary: $23–$28/hr. (based on experience & certifications) Position Overview As a member of our front-line first response team, you’ll respond to homes and businesses to mitigate property damage resulting from emergencies such as fire, flood, mold, or other damage. Under the direction of a project manager, you’ll quickly arrive at the scene, assess the situation, then get to work to mitigate the damage and clean up the mess. From there, you’ll continue to take the scene from chaos to calm, monitoring daily progress, documenting your work, and keeping the customer informed along the way, restoring their property and peace of mind. Key Responsibilities • Respond to emergency calls and perform property restoration procedures for residential or commercial properties after fire, water, mold, or storm damage following industry and company standards of care., • Extract standing water, which may include Category 3 black water or sewage, • Demolition and removal of affected building materials, • Clean and apply antimicrobial solution to hard surface flooring, walls, and carpets, • Occasional cleaning of hard contents and furniture, • Occasional moving of large/heavy furniture, • Pack-out and inventory salvageable personal property for restoration, • Setup and operation of industrial-grade drying equipment, water extractors, including dehumidifiers, air movers, and electrical components, • Setup and operation of fire and odor-control equipment, including HEPA vacuums, air scrubbers, ozone generators, and other tools., • Ensure complete and accurate documentation of damage, work progress, and equipment readings and monitoring using internal systems and procedures, • Maintain company vehicles and equipment inventory, ensuring all equipment is cleaned and job-ready at the end of each day, • Communicate with colleagues and managers regarding project updates, issues, or concerns, • Participate in an on-call rotation as scheduled, • Other duties as assignedRequirements, • 1–3 yrs restoration or construction experience, • IICRC certifications and NYS Mold Remediation Technician license preferred (or willing to obtain in 90 days), • Able to lift 50+ lbs., climb ladders, and work in confined spaces, • Comfortable working around water, sewage, mold, and contaminants (with PPE), • Strong communication and customer service skillsThis position will require scheduled on-call shifts including evening/weekend hours to support emergency jobs. Employees will receive on-call bonuses and will be eligible for overtime pay for after-hours work exceeding 40 hours per week. A clean driver's license and reliable transportation are required. Must pass a pre-employment background check and drug screening.

Great Basin Industrial provides Turnkey Industrial Fabrication, Construction, & Maintenance for many of the world’s leading companies within the petroleum, power, and mining industries. Although headquartered in Kaysville, Utah, we operate fixed-site facilities in Utah, Wyoming, New Mexico, Texas,

Bachelor’s degree in electrical engineering, Construction Management, or related field experience. Minimum of 5 years of experience in electrical project management, preferably in industrial construction. Completion of OSHA 30-Hour Construction Safety Training (or equivalent) required prior to hir

Job DescriptionDescription: Are you looking for a career that offers you the opportunity to share your talents and make a positive impact on the people within our community? Join the Landsman family and take the opportunity to utilize all your skills. Whether you are working independently on projects or alongside other members of the team, you can make a difference. We’re looking to hire a hard-working, motivated, customer service minded individual for the full-time position of Maintenance Technician. Here is a summary of what we need from you: • Effective experience with work including routine resident service requests, preventative maintenance, emergency maintenance, capital improvement and replacements, tool and equipment maintenance, and seasonal maintenance., • Experience with performing maintenance and/or repairs to building systems and apartments (Knowledge of plumbing, carpentry, electrical, appliances, painting/drywall, HVAC, fire and security systems, elevators, as applicable.), • Snow removal experience. It will be mandatory., • The ability to be on-call for evening and weekend emergencies. Reliable transportation is a must., • Excellent interpersonal and communication skills required to interact with residents, vendors, and office staff., • Standard background check and drug screening required. What we offer our full-time employees: • Medical, Dental and Vision benefits, • Company Paid Life Insurance, • Voluntary Life Insurance, • Supplemental Short-Term Disability, • Company Paid Long-Term Disability, • 401k Retirement Plan with Company Match, • Employee Referral Bonus Program, • Paid Time Off, • 10 Paid Holidays Annually Landsman is proud of the fine reputation we have earned as a high-quality professional real estate management organization and would like you to join our team. Contact us now to learn more about this great opportunity! Landsman Development Corp. (LDC) was established in 1971 by its founder and initial shareholder, Elliott Landsman. Since its inception, the company has developed and invested in a wide variety of projects including industrial, commercial, office, retail, and multi-family residential, both subsidized and conventional. Most of the properties developed are owned by partnerships in which LDC has retained an interest as managing general partner or managing member. Mayzon Management Corporation was incorporated in 1972 to manage real estate developed by its parent company, Landsman Development Corp. The company name has evolved over the years, and the name has been changed to Landsman Real Estate Services, Inc. Landsman has grown to manage more than 2,400 rental units and over three million square feet of industrial, commercial and office space and has also become the property management company of choice for several third-party owners. Requirements: Minimum Educational Requirements: High School Diploma or equivalent. Minimum Experiential Requirements: • 2+ years multifamily or construction site management., • Prior experience related to carpentry, plumbing, electrical, appliance, HVAC, and building systems. Special Skills/ Work Conditions Required: • Must have excellent communication, interpersonal, customer service, organizational and time management skills., • Must be able to communicate in English with residents, emergency providers and outside contractors., • Must have a mechanical aptitude; skillful use of equipment and tools, and have physical and manual dexterity skills., • Required use of a cell phone while on call., • Must be able to manage a flexible schedule including overtime and be on-call as assigned., • Must be able to lift, move and transport up to 50lbs without the assistance of hand truck, dolly, or other mechanical lifting devices. Must be able to walk, bend, stoop, climb stairs, access and work in confined spaces as well as at heights in excess of 20 feet and have the mobility required to use ladders.

Maintain on-site document control including project binders, shop drawings, construction drawings, and any other relevant construction documentation. The Site Manager (Design Build, EaaS, Construction) is responsible for all aspects of the assigned commercial/ industrial construction projects to run

Are you a Senior Project Manager in the Architecture, Engineering, and Construction field seeking purpose, challenge, and talented colleagues? With a diverse portfolio of residential, energy, commercial, light industrial and public programs, CESO has the opportunity for you to develop your career.We