Trabajos industrial construction en Syracuse, New YorkCrear alertas

Job Description Journeyman Insulators with OSHA and Aerial Lift certifications are needed for industrial project in the Minetto, NY area. You will be insulating a tank using 2' wide metal clad urethane boards, running cable through those boards, cutting out for stairs, and crimping it all together. Workers with TWIC cards and tank experience is preferred, but not required, general mechanical insulation skills would suffice. You must bring your own basic hand tools of the trade and you may be required to pass a pre employment drug and background screening upon arrival. Paying up to $35/hr $150/day per diem Travel in pay 60 hours/week 2 month duration Please call Grus Construction Personnel for an immediate interview or reply with resume! Phone: 888..230..9908 Fax: 888..230..9909 Email: registration@@gruspersonnel.com (remove the additional @ symbol) \nCompany Description We believe our mission is two-fold: to staff our client’s projects with the highest quality of skilled tradesmen available and to foster an environment in which the quality of our workers continues to increase. We are dedicated to delivering quality and efficiency in one package. Grus offers our workforce the opportunity for permanent employment and a diversified work experience through our many and varied clients. We believe the service Grus provides offers benefits to both the general contractor and the skilled worker. We believe our mission is two-fold: to staff our client’s projects with the highest quality of skilled tradesmen available and to foster an environment in which the quality of our workers continues to increase. We are dedicated to delivering quality and efficiency in one package. Grus offers our workforce the opportunity for permanent employment and a diversified work experience through our many and varied clients. We believe the service Grus provides offers benefits to both the general contractor and the skilled worker.

Job DescriptionJob Title: Assembler Job Description This role focuses on assembling, rebuilding, and reassembling low-mix, high-volume sub-assembly components by accurately interpreting diagrams and standardized work instructions. You will use hand and power tools to complete mechanical, hydraulic, and/or electronic assemblies while maintaining high quality through consistent self-inspection and adherence to established processes. Responsibilities • Perform assembly, rebuild, and reassembly of low-mix, high-volume sub-assembly components by following diagrams and standard work instructions., • Safely operate cranes and hoists to lift and move materials throughout the facility in accordance with safety procedures., • Assemble all components using the required hand tools and production devices in the correct sequence within the allocated takt time for each process., • Inspect, operate, and test completed products to verify proper functioning, machine capabilities, and conformance to customer specifications., • Measure, examine, and test completed units using visual inspection and boundary samples to identify defects and ensure compliance with specifications., • Rework, repair, or replace damaged parts or assemblies and respond appropriately to non-conforming material., • Maintain accurate and complete documentation related to quality and productivity within the manufacturing system., • Complete all assigned tasks accurately and within established timelines while following standardized work procedures., • Work in a safe and alert manner at all times, following all safety guidelines and practices., • Notify leadership immediately in the event of abnormal situations, including unsafe occurrences, non-conforming material, or production equipment malfunctions, and follow the stop-call-wait procedure., • Demonstrate a positive and professional work ethic, show respect for colleagues, and consistently uphold company core values. Essential Skills • Experience performing mechanical assembly using hand tools and power tools., • Ability to read and interpret diagrams, standardized work instructions, and basic production documentation., • Ability to safely operate cranes and hoists to move materials within a manufacturing environment., • Capability to inspect, operate, and test completed products to verify functionality and conformance to specifications., • Skill in identifying defects through visual inspection and comparison to boundary samples., • Ability to rework, repair, or replace damaged parts or assemblies in response to non-conforming material., • Ability to work safely and remain alert in a fast-paced production environment., • Physical ability to stoop, bend, twist, turn, squat, reach, push, pull, grab, and grasp as required by the job., • Ability to properly lift up to 50 pounds., • Previous manufacturing or warehousing experience preferred., • General mechanical aptitude and comfort working on an assembly line or in a production setting. Additional Skills & Qualifications • Experience with mechanical assembly in a production or assembly line environment., • Familiarity with mechanical, hydraulic, and/or electronic assemblies., • Experience using a variety of hand tools and power tools in a manufacturing setting., • Exposure to blueprint reading or working from diagrams and standardized work instructions., • Experience in general labor within a manufacturing or warehouse environment., • Strong attention to detail and commitment to maintaining quality and productivity documentation., • Professional attitude with a focus on respect, teamwork, and adherence to core values. Why Work Here? You will join a structured manufacturing environment that values safety, quality, and teamwork. The role offers consistent daytime hours, providing a predictable schedule and work-life balance. You will have the opportunity to build and refine practical mechanical skills while working with established processes and tools. The culture emphasizes professionalism, respect for people, and continuous improvement, creating a supportive environment where you can grow and contribute meaningfully. Work Environment This position is based in a manufacturing facility focused on material handling and industrial equipment. You will work around production lines, cranes, hoists, and a variety of hand and power tools used for mechanical, hydraulic, and electronic assemblies. The role follows a first-shift schedule, typically 6:00 a.m. to 2:30 p.m., Monday through Friday. The work is physically active and requires regular stooping, bending, twisting, turning, squatting, reaching, pushing, pulling, grabbing, and grasping, as well as safely lifting up to 50 pounds. You will work in an environment that prioritizes safety procedures, standardized work, and adherence to quality and productivity documentation. Job Type & Location This is a Permanent position based out of East Syracuse, NY. Pay and Benefits The pay range for this position is $21.50 - $21.50/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in East Syracuse,NY. Application Deadline This position is anticipated to close on Oct 13, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionDescription: Job Summary The Shipping & Packaging Technician is responsible for preparing finished tanks, process equipment, and components for safe and timely shipment to customers. This hands-on position performs packaging, carpentry, material handling, and shipment preparation tasks to ensure equipment is protected during transportation and meets customer, quality, and safety requirements. This role works closely with Production, Quality, Engineering, and Project Management to support Factory Acceptance Testing (FAT), final inspections, shipment readiness, and outbound logistics. Requirements: Essential Functions · Prepare finished tanks, vessels, and process equipment for shipment through cleaning, staging, labeling, packaging, and load preparation activities. · Build custom skids, crates, blocking, bracing, and protective packaging to secure large industrial equipment during transportation. · Utilize hand tools, power tools, saws, drills, nail guns, and other carpentry equipment to construct shipping supports and protective structures. · Install shrink wrap, padding, covers, and other protective materials to prevent damage during transit. · Support Factory Acceptance Testing (FAT) activities and customer inspections to ensure products are ready for shipment. · Complete final shipment inspections and verify customer punch list items have been addressed prior to release. · Assist with loading and securing equipment onto trailers, ensuring compliance with transportation and customer requirements. · Read and interpret shop drawings, shipping instructions, customer specifications, and packaging requirements. · Coordinate with Production, Quality, Engineering, and Project Management teams to resolve shipment preparation issues. · Complete shipping documentation, bills of lading, packing lists, and ERP transactions accurately and timely. · Operate forklifts, overhead cranes, hoists, and other material handling equipment safely and effectively. · Maintain organized, clean, and safe shipping, staging, and storage areas. · Assist with inventory movement, material handling, and other shipping and receiving activities as needed. · Cross-train in additional warehouse, shipping, and supply chain functions to provide operational support. · Follow all Feldmeier Equipment safety policies, quality standards, company procedures, and applicable regulatory requirements. · Perform other duties as assigned to support efficient facility operations and customer deliveries. Required Qualifications · High school diploma or GED. · Experience in carpentry, construction, woodworking, manufacturing, crating, packaging, or a related hands-on trade. · Ability to safely operate and use hand tools and power tools. · Ability to read a tape measure and perform basic shop math calculations. · Strong mechanical aptitude and attention to detail. · Ability to work independently and as part of a team in a fast-paced manufacturing environment. Preferred Qualifications · Previous experience building custom crates, skids, or packaging for industrial equipment. · Experience shipping large fabricated assemblies, tanks, or custom-built equipment. · Experience using Epicor or other ERP systems. · Forklift certification or ability to obtain certification. · Experience operating overhead cranes, rigging equipment, or material handling equipment. Physical Requirements · Ability to stand and walk for up to 8 hours per day. · Ability to frequently bend, squat, kneel, twist, stoop, climb, and reach throughout the workday. · Ability to regularly lift, carry, push, and pull up to 50 pounds. · Ability to climb ladders, stairs, and elevated platforms as required. · Ability to work inside, underneath, and around large vessels and process equipment. · Ability to safely operate forklifts, cranes, and other material handling equipment. · Ability to wear required personal protective equipment (PPE). · Ability to work in a manufacturing environment with varying temperatures, noise levels, and production conditions. · Ability to perform physically demanding work while maintaining attention to detail and safety standards.

Job Description About Us:Riccelli-Northern is an American-owned and operated company proudly delivering American products on American soil with the help of American workers. With more than 50 locations across the Northeast, we are a leader in transportation, mining, and material handling - known for premium products, exceptional service, and a strong commitment to quality. Our operations supply a wide range of environmentally friendly ("green") products including ready-mix concrete, concrete block, aggregates, and blacktop, with the capability to haul materials to virtually any location. Position Summary: The Ready-Mix Concrete Driver is responsible for the safe and efficient delivery of ready-mix concrete to residential, commercial, industrial, and public works construction sites. Operating a commercial mixer truck requiring a CDL Class B license, this position ensures timely delivery, proper handling of concrete products, and exceptional customer service while maintaining compliance with all DOT regulations, company policies, and safety standards. Job Description:Safely operate a Ready-Mix concrete truck to deliver to various construction sites. Perform required pre-trip and post-trip inspections and follow all DOT and company safety standards. Load, transport, and unload concrete while maintaining proper mix, slump, and quality specifications. Communicate effectively with dispatch and job-site personnel to ensure smooth, timely deliveries. Maintain cleanliness of truck and mixer drum; prevent buildup and ensure proper operation. Accurately complete delivery tickets, driving logs, and required DOT documentation.Qualifications:Valid CDL Class A or B license with a clean driving record. Experience operating commercial vehicles; Ready-Mix experience preferred but not required. Ability to lift 50lbs and work in outdoor weather conditions. Strong communication and customer-service skills on active job sites. Willingness to work early mornings, overtime, and occasional weekends as needed.

Job Description Robison Contracting Incorporated (RCI) is a construction firm focused on Building America’s Infrastructure. Specifically, RCI is focused on the electric utility sector. We are developing a team of dedicated electrical technicians to help us commission and perform service and maintenance on Utility Scale Central Solar (PV) Inverters and Energy Storage Systems. RCI’s founders are performance driven leaders looking to build our team around our P.R.O. model. People, Resources, and Opportunity. RCI is always building the team with the right People. The right people buy into the culture, are competent, and take ownership of their work & community. RCI will provide paid training to technicians with an electrical background. This position will be 100% travel as we are building a dedicated team of specialists to travel to various project locations, perform their duties, and move on to the next. RCI technicians will work on multi-employer work sites and need to represent RCI's team and clients with the highest level of integrity and professionalism. It is not always the case, every project is different, however, technicians should be prepared to work long hours, with a potential to work more than 65 hours in a given work week. Qualified candidates shall be prepared to travel, have experience with troubleshooting electrical equipment, crimping data cables, software uploads, use a computer and use PPE properly around electrical equipment. Preferred Experience working in electrical utility/industrial environments: • Minimum of a basic background in electrical equipment & distribution systems (120V to 480V); this should include proper training & use of PPE equipment for the systems being worked on., • Prefer minimum of five (5) years’ experience working with electrical systems., • Ability to diagnose & troubleshoot electrical systems, use multimeter, and test & make data cables., • Job related technical knowledge of electrical systems such as panelboards, switchboards, generators, UPS systems, DC voltage systems, fire alarm systems, etc., • Ability to communicate effectively with audiences that include but are not limited to customer, management, coworkers, clients, vendors, contractors, and visitors., • Ability to attend to detail and work in a time-conscious and time-effective manner., • Ability to use/develop troubleshooting techniques for various electrical/mechanical systems in both standard and high-stress situations. Other Job Requirements Tasks will include physical labor; examples include working on ladders, ability to carry minimum 65lbs, use of PPE equipment, ability to obtain forklift/manlift operator’s license, etc. Working conditions include various levels of environmental conditions including but not limited to generally favorable indoor workspace, outdoor workspaces, moving mechanical parts and vibration; high, precarious places, fumes or airborne particles and extreme temperatures and high noise levels. Travel to required location. Travel will vary depending on the project and location. For most, this is a 100% travel position. Preferred Qualifications OSHA 10 or higher. Obtained TWIC. PowerSafe Training for Electrical Utilities. Must have good verbal and written English communications skills. Work effectively with multi-cultural personnel to execute work assignments. Strong interpersonal and mentoring skills and organizational accountability processes Good multi-tasking skills Proficient in MS-Office programs or G-Suite RCI is a Drug Free Workplace, all applicants should be aware RCI's customers often require a drug test prior to working on their project site. RCI technicians could be drug tested multiple times in a given year. RCI may also require a background check prior to submitting an offer. RCI is an equal opportunity employer that recognizes the value of a diverse workforce. All qualified individuals will receive consideration for employment without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by federal, state, or local law.

Job Description Heidelberg Materials is seeking a Ready-Mix Driver in the Syracuse area at our Central Square, Marcellus, and Nedrow locations. If you have a valid CDL Class A or B driver’s license with industrial or construction driving experience, Heidelberg Materials wants to hear from you! About the Company: Heidelberg Materials North America, previously known as Lehigh Hanson, operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. We're dedicated to our goal to create sustainable value with industry-leading products and solutions to satisfy the construction needs of our customers around the world. We are Building a Better Future for our people, our customers, our communities and our shareholders. What You'll Get To Do As a Ready Mix Driver you will deliver concrete to job sites following safety and operational guidelines. You will check concrete for quality and size according to ticket and maintain courteous customer relations. Earn $23-25 per hour, frequent overtime! Requirements: • High school diploma or equivalent (GED), • Valid CDL Class A or B Driver's License with no restrictions, • Proficient reading, writing, and math skills, • Minimum of one-year vehicle road experience operating multi-speed transmission of a Commercial vehicle, • Good driving record, • Valid medical card, • Concrete knowledge and experience preferred, • Mechanical background or skills preferred, • Work Availability – Our business requires availability to work six days a week (Monday-Saturday) and occasionally on Sunday. Individuals must be able to drive a maximum of 11 hours per day and work up to 14 hours per day as regulated by the Department of Transportation., • Solid attendance and punctuality history, • Ability to climb ladders, • Ability to lift and assemble concrete chutes weighing 75 lbs Why join the Heidelberg Materials team? • Competitive Pay – Earn $23-25 per hour, frequent overtime, • No Overnights – HOME DAILY!, • 401k with employer match, • Year-Round Health, Dental & Vision Insurance, • Life Insurance, • Vacation & Paid Holidays, • Opportunities for Winter Work and Learning New Skills If this sounds like an opportunity you would be interested in, please visit our application page by clicking here. Heidelberg Materials is a drug-free workplace. All qualified applicants will receive consideration for employment without regard to the individual's race, color, sex national origin, religion, age, disability, genetic information, status as a military veteran or any other characteristic protected by applicable law. Powered by JazzHR hIuqHCsOz7

Job Description J&B Installations, Inc. is a commercial and industrial roofing contractor specializing in EPDM, PVC, and TPO membranes. We are family owned and operated and have been the leading commercial roofing company in New York State for over 45 years. J&B Installations is located in Skaneateles, NY with jobs located throughout the greater Central New York area. This position is responsible for installing, repairing, and maintaining the roofing systems of commercial buildings such as offices, factories, schools, hospitals and warehouses. Commercial roofers work with various types of roofing materials, including asphalt, metal, and membrane systems, and are skilled in working with both flat and sloped roofs. Essential Job Duties and Responsibilities: (Additional duties may be assigned) • Installation of single ply roof systems such as EPDM, TPO, PVC, • Installation of single ply and BUR roof system details and flashings, • Ability to interpret drawings, and follow written and verbal instructions, • Follow manufacturer specifications during installation, • Flat Insulation and Tapered insulation layout is a plus, • Load, unload, and store materials safely, • Cut and shape roofing materials to fit specified areas, • Abide by all safety protocols and regulations are followed, including proper use of harnesses, scaffolding, and other safety equipment, • Work with fall protection systems, ladders, and lifts to access high areas, • Adhere to OSHA (Occupational Safety and Health Administration) guidelines Requirements Minimum Qualifications: • 2-5 years experience in commercial roofing preferred, • Must have own transportation to and from job sites, • OSHA 10 certification. Can be acquired online, • Must have own hand tools Knowledge, Skills, and Abilities: • Ability to interpret construction blueprints, diagrams, and roofing plans., • Understanding the different types of commercial roofing systems (e.g., TPO, EPDM, PVC, built-up roofing, metal, etc.) and materials used in construction, repair, and maintenance., • Knowledge of OSHA regulations and workplace safety protocols, including fall protection, ladder safety, and equipment handling., • Understanding the proper use of roofing tools (e.g., power tools, hand tools, pneumatic guns) and equipment (e.g., scaffolding, ladders, hoists)., • Basic math skills to calculate areas and measure materials., • Ability to communicate effectively with team members and supervisors, including explaining issues and project updates., • Ability to work collaboratively with a team of other roofers and contractors to complete projects efficiently and safely., • Ability to work in physically demanding conditions, including lifting heavy materials, working at heights, and withstanding hours of outdoor work., • Ability to assess and identify risks associated with roofing work, ensuring safety and quality standards are maintained throughout the project. Benefits Why work for J&B Installations? • Family owned and operated, • Competitive starting pay rate $23.00 - $38.00, depending on experience, • Prevailing wage jobs (Rate varies based on county) $45.00 - 74.25/hr., • Comprehensive Medical Insurance, • 401k retirement plan, • Profit Sharing, • Opportunity for advancement J&B Installations is an equal opportunity employer.

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Competitive salary, • Health insurance Alpha and Omega Staffing Services is seeking two QA/QC Electrical Managers for a long term microchip construction project in Syracuse, New York. Pay: $65 per hour Per diem: $150 per day for eligible travelers Type: 1099 independent contractor Duration: Approximately two years Candidates must have a journeyman electrician background or equivalent and at least two years of commercial or industrial electrical quality control inspection experience. Relevant electrical or quality certifications are preferred. Interested candidates should provide an updated resume and certifications. Kristin Ryan Executive Assistant Office: (844) 592 0872 Mobile: (661) 809 5912 Website: a-osafety.com

Job Description Estimator - Electrical Utility Construction Location: Syracuse, NY Position Overview: FindTalent is seeking an experienced Estimator for a confidential client in the electrical utility construction sector. As an Estimator, you will play a key role in evaluating project requirements, creating cost estimates, and preparing competitive bids to secure contracts for utility, commercial, industrial, and institutional electrical projects. You will collaborate with project managers and other key stakeholders to ensure that proposals are accurate, comprehensive, and timely. Key Responsibilities: • Analyze project plans, specifications, and blueprints to understand electrical system requirements., • Conduct site assessments as needed to evaluate existing conditions and identify any potential project challenges., • Work closely with project managers and engineers to define project scope, goals, and objectives., • Develop detailed cost estimates including labor, materials, equipment, and subcontractor costs., • Use advanced estimating software tools to produce accurate and competitive bids., • Account for variables such as permits, inspections, and possible change orders when determining costs., • Request quotes from suppliers and subcontractors and negotiate pricing terms., • Prepare well-structured proposals that clearly outline the value and competitiveness of the company’s services., • Present proposals to clients and participate in interviews to help secure contracts., • Identify and address potential risks related to electrical construction projects, offering solutions for risk mitigation., • Stay up to date on market trends, industry standards, and regulatory changes that may affect project budgets., • Maintain precise records of estimates, proposals, and all associated project documents., • Ensure compliance with all applicable laws and regulations., • Work collaboratively with project teams to ensure successful project completion. Qualifications: • A degree in Electrical Engineering, Construction Management, or relevant trade experience is preferred, but not required., • At least three years of experience in estimating, construction cost management, or related fields., • Proficiency in construction estimating software and Microsoft Office applications., • Strong knowledge of electrical systems, industry codes, and safety regulations., • Excellent analytical, mathematical, and problem-solving skills., • Strong communication and negotiation abilities., • Highly detail-oriented with a focus on accuracy and thoroughness., • Ability to independently estimate electrical projects valued over $100,000., • Experience in preparing and presenting detailed project proposals., • Knowledge of industry trends, market conditions, and cost-effective strategies., • Ability to work autonomously and as part of a collaborative team environment. Compensation: The estimated salary range for this position is between $60,500 and $80,000 annually. Please note, the exact compensation may vary depending on factors such as location, experience, skill set, and the complexity of the project. At FindTalent, we strive to offer competitive and fair compensation packages to attract top-tier talent. The higher end of the salary range typically applies to candidates with extensive experience and expertise in the field.

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn, and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview We are seeking a Senior Construction Estimator with a minimum of 8 years of total related experience in industrial/commercial markets. Design-build experience is also a plus. The preconstruction department will pursue comprehensive public, private, and design-build projects within our core markets. The Senior Estimator is responsible for planning and executing estimating activities at the project level with support from the estimating department. This individual must possess strong interpersonal skills and will act as a liaison to the subcontractor community. As an experienced Estimator, you will lead projects from initial budgeting, through estimating, to negotiating contracts and subcontracts. Collaboration with internal and external design professionals will be integral to our design-build projects. You should possess the ability to look beyond basic information and ask the right questions to assemble a complete and accurate estimate. The ideal candidate is a collaborative and passionate advocate for our customers, empowering and engaging them throughout the process. We encourage innovative solutions to complex issues as they arise related to cost, lead times, trade partners, and/or specified products or materials. Position Responsibilities • Handle complex, integrated projects from the first estimate through contract award., • Prepare and organize project RFP’s., • Receive and manage incoming RFI’s and subcontractor requests., • Prepare detailed instructions to bidders, trade specific clarifications and comprehensive bid packages., • Prepare a complete and accurate bid tab, compiling general conditions, trade proposals and applicable general construction self-perform work., • Make subcontractor award recommendations to the PM/Owner, assist with negotiating subcontracts with trade partners., • Assist in preparation of post bid submissions., • Assist in preparation preliminary project schedules., • Knowledge and understanding of how to lead and promote subcontractor diversity, and review all specific MWBE & SDVOB good faith efforts., • Assemble and participate in Client/Owner estimate presentations., • Engage and develop business with new and existing customers. Skills/Education/Experience • Thorough understanding of building systems, construction methods, and industry trends., • 8 years of experience as a commercial construction estimator., • Experience preparing detailed estimates and conceptual cost studies from schematic or feasibility level documentation., • Understanding of design-build project delivery., • A strong work ethic and a “can-do” attitude., • Flexible, detail-oriented team player with the ability to manage multiple tasks, produce quality work, and consistently meet deadlines., • Excellent listening skills and strong communication skills., • Well-versed in negotiations., • Create innovative approaches and solutions on a project-by-project basis., • Ability to identify, adapt to, and resolve complex issues., • Able to work autonomously and make decisions on the fly., • Must have knowledge and understanding of unit costs and the factors that drive construction cost., • Effective participation in a team environment, internally and externally, • Effective time management & organization, • Presentation skills, • Proficient in Microsoft Office, • Working knowledge of Building Connected, On-Screen Takeoff, Blue Beam, Revit, Procore, Microsoft Project, OR similar Preconstruction Software, AutoDesk., • College degree preferred, but not required Estimated Compensation Range: $95,000 - $125,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 55 years we have been delivering critical infrastructure design, planning and construction services in multifamily, healthcare, education, civil/site infrastructure, and program management. We have offices throughout the United States and provide full design discipline in many of these offices and General Contracting only in California and New York, Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job DescriptionDescription: Advance Testing Company, a SOCOTEC Company, is currently seeking a Senior Construction Materials Testing Technician Advance Testing Company, an established New York-based construction materials testing and inspection firm with several offices throughout the Northeast, has an opportunity available for a Senior Construction Materials Testing Technician. The position would be based out of Advance Testing's East Syracuse, NY office. Advance Testing Company performs testing and inspection of materials such as soils, aggregates, concrete, masonry, reinforcing steel, asphalt, fireproofing and firestopping. Typical assignments include projects related to construction of roads, bridges, airports, tunnels, commercial and industrial buildings, schools, government and military sites, and material fabrication and production facilities. RESPONSIBLITIES • Observe work in progress to ensure that procedures and materials used conform to approved drawings and specifications., • Perform standard testing of materials., • Prepare samples of materials for laboratory testing., • Examine workmanship of installations for conformity to specifications., • Maintain daily log of construction and inspection activities and complete clear, accurate reports daily., • Prepare sketches of construction installations that correlate with testing and inspection sites., • Other related duties may be assigned. Requirements: QUALIFICATIONS • High school diploma or equivalent, • 1+ years of construction materials testing, • OSHA 10 or 30, • Nuclear Density Certification, • At least one of the following: o ACI Field 1 o NETTCP soils & aggregate or similar o NETTCP Plant o NETTCP Paving o NYS QCQA o NYS Density Testing Inspector o NECETP Field o NECETP Plant 1 or 2 o NJSAT Construction Technologist o NJSAT Plant 1 or 2 • Strong focus on safe work practices and adherence to all safety protocols, • Must be detail oriented and able to work independently, • Must be able to travel and to perform site visits, • Requires a valid, clean driver’s license, • Applicants may be required to obtain any security clearances and background confirmation for sensitive projects and locations. COMPETITIVE SALARY AND BENEFITS PACKAGE In addition to providing competitive experience and qualification-driven salaries, Advance Testing Company, Inc. offers a wide range of benefit options, including: • Comprehensive group medical insurance, including health, prescription, dental, vision, • Flexible spending accounts for medical expenses and dependent care, • Company paid offset to out-of-pocket health insurance and prescription costs, • Opportunities for professional growth and advancement, • Paid time off and sick days, • Company–observed paid holidays, • Paid training and certification, • AFLAC Plans including short and long-term disability coverage, life insurance, et al., • 401(k) Retirement Savings Plan All positions may require lifting and/or physical activities, including lifting of up to 75 lbs., walking/working on uneven surfaces, and driving to and from job sites. Work hours vary, but may include day, night and weekend shifts. We are an equal opportunity/affirmative action employer and highly encourage resumes from all interested parties including women, minorities, veterans and persons with disabilities. All qualified applicants will be afforded equal employment opportunities without discrimination on the basis of race, creed, color, national origin, sex, age, disability, marital status, or any other protected class. Advance Testing Company, Inc. participates in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States.

Job Description Momentum Environmental Services provides specialized environmental, industrial, and waste management services to several leading industries throughout the Northeast. The Safety Technician supports the Health & Safety Manager in promoting a safe work environment across all company operations. This position is ideal for an individual looking to begin or grow a career in occupational health and safety while gaining hands-on experience in environmental and industrial services. The Safety Technician reports directly to the Health & Safety Manager and assists with the administration of the company’s Health & Safety Program through field support, documentation, training coordination, compliance, inspections, and employee engagement. Essential Responsibilities • Support the Health & Safety Manager with the day-to-day administration of the company’s Health & Safety Program., • Conduct routine job site visits to observe work practices, identify hazards, and reinforce safe work procedures., • Conduct safety inspections, audits, and participate in attendant corrective action and follow-up processes., • Learn, and train field staff in the execution of the Safety Management system., • Help investigate incidents, near misses, and first aid cases while documenting findings and corrective actions within the company’s reporting guidelines., • Maintain training records, certifications, and employee safety files using the company’s cloud-based Health and Safety Information System., • Coordinate employee training including HAZWOPER, OSHA, First Aid/CPR, and site-specific requirements., • Train staff on how to preparing toolbox talks, safety alerts, and other safety communications., • Support the development of Job Safety Analyses (JSAs), Safe Work Practices, and other safety documentation., • Maintain the company’s safety metrics, calculations, OSHA logs, and other compliance documentation., • Perform field observations and behavioral safety audits to encourage safe work habits., • Assist with personal protective equipment (PPE) inventory, inspections, and distribution., • Assist with vehicle safety inspections and fleet safety initiatives., • Participate in new employee safety orientation and onboarding., • Help ensure compliance with OSHA, DOT, and company safety policies., • Assist in maintaining safety equipment including gas monitors, confined space equipment, fall protection equipment, and first aid supplies., • Travel to company branches and job sites to provide safety support as needed., • Perform other health and safety duties as assigned. Core Competencies • High emotional intelligence and ability to develop relationships and trust with a team., • Positive attitude with a willingness to learn., • Strong communication skills; both written and verbal, • Good organizational and time management skills., • Ability to build positive relationships with field employees and management., • Attention to detail., • Strong work ethic and reliability., • Ability to work independently while taking direction from supervisors., • Comfortable working both in an office and outdoors on active job sites. Specific Skills, Experience and Qualifications • High school diploma or GED required., • OSHA 40-hour HAZWOPER Training, • OSHA 30-Hour Construction or General Industry certification preferred (or willingness to obtain)., • Confined Space Training, • 0–2 years of safety, environmental, construction, industrial, or related experience preferred., • First Aid/CPR certified, • Valid driver’s license, • Ability to lift up to 50 pounds and work in industrial environments including outdoor conditions,, • Excellent, written, oral and communication and/or presentation skills are required., • Must be programmatic and able to function well in a team setting and, at times, under critical schedules., • Intermediate knowledge of Excel, Word, Outlook, and PowerPoint, • Interest in developing a career in occupational health and safety., • Comfortable interacting with employees at all levels of the organization., • Ability to learn OSHA, DOT, and other regulatory requirements., • Self-motivated and eager to expand technical knowledge through on-the-job training., • Professional demeanor with a commitment to promoting a strong safety culture.

Job Description City of Syracuse residency is required for this position. If you are not a resident, you have six (6) months from your date of hire to establish residency. Job Description The work involves responsibility for performing technical work inspecting electrical installations to determine and ensure conformity to required specifications and compliance with local and state electrical code requirements. Duties require technical examination and the application of electrical trade practices use in inspection work. Assignments are generated by the receipt of building permits, certificate of compliance applications, complaints and referrals. The employee in this class deals with the public and must use tact and judgement in maintaining such relationships. This class is responsible for conducting plan reviews and inspections of Electronic Fire Protection Alarm Systems. General supervision is received from an administrative superior. This class does not exercise supervision but may assist in on site and in-house electrical training for new employees. Does related work as required. Typical Work Activities • Performs technical inspections on electrical wiring, connections and fixtures in the process of construction or repair for compliance with approved plans, specifications and present ordinances/laws., • Inspects existing wiring and fixtures, noting general condition and safety for continued use., • Conducts field inspections of commercial and industrial electrical wiring and electronic Fire Alarm Protection System installations., • Investigates complaints of defective or inadequate wiring and issues violation notices to owners of buildings with such conditions., • Explains requirements of state and city building codes to contractors and the general public., • Maintains records and issues reports on inspection activities.Knowledge, Skills, and Abilities, • Thorough knowledge of modern practices, principles, materials and tools used in electrical installation., • Good knowledge of all current codes, regulations and laws governing electrical installation., • Working knowledge of Fire Protection Alarm Systems and their installation, including Syracuse Electrical Code, National Electrical Code and National Fire Prevention Code., • Ability to recognize faulty construction or hazardous conditions created by deterioration or faulty installation., • Ability to read and interpret electrical construction specifications and plans, and to recognize deviation from such plans in the construction process. Ability to keep accurate records and prepare concise reports. Minimum Qualifications • A) Graduation from a regionally accredited college or university or one accredited by the New York State Board of Regents to grant degrees with an Associates Degree in electrical construction or electrical technology or a closely related field and four (4) years of work experience, or its part time equivalent, in electrical installation or related work in which the major job function must have involved the application of electrical codes to the construction, installation, repair or maintenance of electrical systems, one (1) year of which must have involved the installation, maintenance and repair to Fire Protection Alarm Systems; or,, • B) Six (6) years of work experience, or its part-time equivalent, in electrical installation or related work in which the major job function must have involved the application of electrical codes to the construction, installation, repair or maintenance of electrical systems, one (1) year of which must have involved the installation, maintenance and repair to Fire Protection Alarm Systems; or,, • C) An equivalent combination of training and experience as defined by the limits of (A) and (B)Special Necessary Requirement Within six (6) months of appointment must successfully complete the licensing examination for a Master Electrician and Special Alarm certification. Benefits • Dental insurance, • Health insurance, • Paid time off, • Parental leave, • Vision insurance, • Retirement plan The Affirmative Action Policy of the City of Syracuse is to provide equal employment opportunity for all individuals regardless of race, color, sex, religion, creed, age (18 and over), marital status, national origin, disability, veteran status, gender identity or gender expression, sexual or affectional preference or orientation, or any other classified group within the protected class. The City also complies with 31 CFR part 51. If you have a disability for which you wish special accommodation to be made, contact the Office of Human Resources at 315-448-8780 or personnel@syr.gov. All offers of employment will be contingent on the successful completion of a background check and/or drug screen. Job Posted by ApplicantPro

Job DescriptionCompany Description Turner & Townsend is a global professional services company with over 22,000 people in more than 60 countries. Working with our clients across real estate, infrastructure, energy and natural resources, we transform together delivering outcomes that improve people’s lives. Working in partnership makes it possible to deliver the world’s most impactful projects and programmes as we turn challenge into opportunity and complexity into success. Our capabilities include programme, project, cost, asset and commercial management, controls and performance, procurement and supply chain, net zero and digital solutions. We are majority-owned by CBRE Group, Inc., the world’s largest commercial real estate services and investment firm, with our partners holding a significant minority interest. Turner & Townsend and CBRE work together to provide clients with the premier programme, project and cost management offering in markets around the world. Job Description Turner & Townsend are seeking an experienced Director of Estimating & Cost Management to lead and develop a team of Estimators and Cost Managers and the delivery of such services for a large-scale Semiconductor construction project. This individual will be responsible for ensuring service excellence in terms of service delivery, continued growth of our cost management service offering and client engagement. The successful candidate will be a driven leader with great interpersonal skills. *This role requires onsite presence Responsibilities: • Strong leadership skills, experience leading a cost management team, ensuring they deliver on all accountabilities., • Lead communications with the client and oversight of cost management team services., • Lead research related to construction market conditions, including analysis of official published data., • Produce thought leadership reports providing valuable insights to the construction market, • Lead the strategic and operational management of Cost Management Services in a variety of sectors, including resource planning and management, financial management, business generation and training and development., • Set a clear strategy and ambition with the team in line with our Business Plan, • Grow and develop exceptional people, promoting a culture of learning, respect and inclusivity., • Knowledge management – Ensure that key information and learning generated from each commission is inputted into internal databases and shared., • Process improvement – Identify and act upon ways to improve internal systems and processes., • Quality Control – Ensure compliance with quality standards and participation in ISO audits., • Develop priority plans including risk mitigation through internal tools, make performance measurements via Key Performance Indicators (KPI) and appraisal documents, management controls and critical success factors based on company goals, • Undertake internal BMS audits, and coordinate and represent the office for external audits undertaken by the external certification authority., • Develop a detailed understanding of the market, acting as a brand ambassador and creating a pipeline of opportunity with existing and new clients, • Identify and act upon cross-selling opportunities., • Participate in meetings with Senior leadership, Directors and staff and prepare and deliver presentations, • Financial Management – Using internal software, track ongoing revenue, margin levels and monthly fees and resource requirements for each cost commission., • Preparation of proposals/RFP responses for new clients/projects., • Attend relevant networking events and other promotional opportunities with directors., • Support the training and mentorship of current staff and promote an upward career trajectory., • Proactively partner with talent acquisition team to attract the best talent, actively manage resource requirements and proactively plan for future staffing needs., • Be a role model that drives a one business culture that achieves great outcomes by striking the right balance for our people, clients, stakeholders, and society. Qualifications, • Bachelor’s degree in construction management, cost management, quantity surveying, engineering or field related to construction., • Graduate degree in quantity surveying, cost management, construction management, or engineering is preferred., • 12+ years of relevant Estimating and construction project cost management or quantity surveying experience., • 2+ years managing high performing cost management teams in a consulting environment., • Prior people management experience., • Proven track record of managing successful cost management service delivery for clients., • Exceptional Business development acumen and ambition to drive business growth., • Major construction sector experience working with high caliber clients in commercial real estate, data center, life sciences, industrial manufacturing, natural resources, etc., • Demonstrates excellent presentation, verbal, written, organizational, and communication skills., • Semi-conductor / manufacturing experience preferred. Additional Information On-site presence and requirements may change depending on our client's needs SOX control responsibilities may be part of this role, which are to be adhered to where applicable. Our inspired people share our vision and mission. We provide a great place to work, where each person has the opportunity and voice to affect change. We want our people to succeed both in work and life. To support this, we promote a healthy, productive and flexible working environment that respects work-life balance. Turner & Townsend is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees and actively encourage applications from all sectors of the community. Please find out more about us at www.turnerandtownsend.com/ and https://www.heery.com/ All your information will be kept confidential according to EEO guidelines. #LI-ALM1 Join our social media conversations for more information about Turner & Townsend and our exciting future projects: Twitter Instagram LinkedIn It is strictly against Turner & Townsend policy for candidates to pay any fee in relation to our recruitment process. No recruitment agency working with Turner & Townsend will ask candidates to pay a fee at any time. Any unsolicited resumes/CVs submitted through our website or to Turner & Townsend personal e-mail accounts, are considered property of Turner & Townsend and are not subject to payment of agency fees. In order to be an authorised Recruitment Agency/Search Firm for Turner & Townsend, there must be a formal written agreement in place and the agency must be invited, by the Recruitment Team, to submit candidates for review.

Job Description *Applicants MUST submit a cover letter with resume to be considered. *This position will require in-office presence. Hybrid work schedules may be possible based on specific job duties and consistent with ESD policy. *Minorities, women, and individuals with disabilities are encouraged to apply. Please contact Human Resources if you require an accommodation. BASIC FUNCTION: With over $124 billion in new investments announced since 2022, New York State is now home to the nation’s fastest-growing semiconductor manufacturing hub. The Vice President of Supplier Ecosystem Readiness will serve as the primary architect for connecting small, mid-sized, and historically underserved businesses to semiconductor-related construction and supply chain contracts. Situated at the forefront of New York State’s historic semiconductor growth, this position offers an unparalleled opportunity for an economic development professional to ensure this moment translates to real opportunities for New Yorkers. This role will oversee a Syracuse-based center and a strategic portfolio of initiatives focused on supplier readiness, service delivery, and market integration. The successful candidate will ensure that businesses across New York State can successfully transition from initial interest to contract-ready participation in major projects, including Micron’s unprecedented $100 billion investment in Central New York. By bridging the gap between small businesses and global supply chains, this role serves as a primary vehicle within state government for connecting local entrepreneurs to long-term, generational wealth-building opportunities. WORK PERFORMED: The Vice President of Supplier Ecosystem Readiness will lead the creation of a first-of-its-kind center and virtual platform to identify, prepare, and connect New York businesses to real contracting opportunities across the semiconductor supply chain and construction ecosystem. This position is about building a pipeline of contract-ready firms and converting opportunities into economic outcomes. The Vice President is an ecosystem builder who will design, launch, and lead the first-of-its-kind business readiness center, an agile engine designed to fast-track local businesses into the semiconductor supply chain, including fab construction. This position will work directly with industry leaders, prime contractors, and local enterprises to identify procurement gaps, remove barriers to entry, and translate massive economic investments into signed contracts for New York businesses—with a passionate focus on uplifting economically disadvantaged and underrepresented enterprises. Key Responsibilities • Build and launch the flagship center as a statewide engine for supplier readiness and market access., • Design the organizational structure, service delivery model, and staffing plan for the center., • Recruit, mentor, and lead a lean, high-performing team (including business engagement professionals) to execute out-of-the-box outreach and data-driven market interventions., • Serve as the primary point of contact for coordination between ESD and local Economic Development Organizations and resources to ensure supplier readiness efforts are not duplicated and are strategically aligned to collaborate and move firms through the pipeline., • Work with partners to integrate existing ESD tools like SSBCI (State Small Business Credit Initiative) capital access and bonding assistance directly into the Center’s workflow so businesses are both prepared and financially positioned., • Develop a NYS semi-industry readiness standard that Prime contractors can trust., • Oversee the deployment of targeted, high-impact capacity-building initiatives. Shift businesses from "interested" to "bid-ready" through rapid interventions in financial structuring (credit, bonding), certifications, back-office optimization, and bidding strategies., • Actively bridge the gap between the procurement needs of anchor companies (e.g., Micron), prime contractors, with the capabilities of NYS suppliers., • Convert complex industry requirements into clear readiness pathways (financial, operational, certification, and procurement readiness) for local firms., • Aggregate "ground-truth" data from the field to advocate for and help ensure NY firms are actually being seen and utilized., • Drive measurable outcomes: number of firms ready, number connected, and number successfully contracting., • Establish and manage high-impact relationships with anchor companies, primes, and ecosystem partners., • Implement and manage a robust CRM-driven system to track pipeline, readiness progression, and outcomes and use this data to refine the model based on real-time market signals, • Performs other duties as assigned., • Some in-state travel and flexibility for off-hours work are required. MINIMUM REQUIREMENTS: Education Level Required: Bachelor's degree in business, Economic Development, Finance, Supply Chain, or a related field. Relevant Experience Required: Experience: 7+ years of experience in economic development, supply chain, small business growth, or related fields, preferably with exposure to advanced manufacturing, construction, or semiconductor ecosystems. Experience working with or alongside procurement, contracting, or supplier ecosystems. Exposure in advanced manufacturing, construction, or semiconductor ecosystems is highly preferred. Significant leadership experience with proven ability to build partnerships, lead teams, manage cross-functional initiatives, and drive measurable outcomes. Knowledge Required: Experience launching or scaling programs tied to real economic or commercial outcomes. An entrepreneur with proven track record of taking complex, high-stakes initiatives from white-paper concepts to operational success. Ability to operate effectively at the intersection of public sector, industry, and small. Strong relationship management skills with the ability to translate engagement into action and outcomes. Data-driven approach, with experience using CRM or pipeline tools to track progress and performance. Ability to operate in ambiguity and bring structure, urgency, and accountability. Ability to engage effectively with both technical industry stakeholders and small business operators. Demonstrated ability to identify barriers and then engineer ways around them. Proven track record of converting complex industrial opportunities into tangible commercial outcomes and contracts secured by New York businesses. Additional Preferred Qualifications: Familiarity with public programs such as MWBE, SBA, and SSBCI. Experience supporting underrepresented businesses in accessing contracting opportunities. Fluency in Spanish or another language commonly spoken in local business communities.

Job Description Experienced Rigger – Lead Complex Heavy Equipment and Industrial Moves with JPW Riggers, Inc. Job Overview: • Company: JPW Riggers, Inc., • Salary/Pay Rate: $30 to $35 per hour, • Location: Syracuse, NY, • Job/Employment Type: Full Time, • Project Scope: Commercial and Industrial, • Mandatory Licenses & Certifications: CDL-A, OSHA 10 The Opportunity: You will play a essential role in executing complex heavy equipment machinery moves and industrial rigging projects across the region. This position offers long-term stability and cross-training opportunities, allowing you to expand your trade skills within a company that values longevity and variety. You will split time between behind-the-wheel transport and hands-on field operations alongside an expert crew. How You Will Make an Impact: • Transport, select, inspect, and assemble specialized rigging gear to ensure safe operations., • Execute precise setting, aligning, leveling, and maneuvering of heavy machinery on dynamic job sites., • Maintain a strict safety-first environment by enforcing state, OSHA, and company guidelines., • Partner directly with field crews, shop foremen, and project leads to hit production milestones., • Perform post-rigging inspections and breakdown equipment efficiently to keep projects on schedule. Required Qualifications & Experience: • Valid Commercial Driver's License (CDL-A)., • Minimum of 3 years of professional rigging and heavy equipment moving experience., • Active OSHA 10 certification., • Deep knowledge of rigging gear, load calculation, and spatial awareness on industrial sites., • Willingness to work in active field environments and perform rigging tasks outside the truck. Preferred Qualifications & Experience: • Practical welding experience., • Multi-trade exposure or an interest in expanding technical skills across related construction disciplines. Compensation & Benefits: • Competitive hourly pay with weekly pay cycles, annual bonus eligibility, and overtime potential., • Prevailing wage project opportunities., • 401(k) retirement savings program with generous employer matching., • Comprehensive health coverage, including medical, dental, vision, life, and disability options., • Generous paid time off covering holidays, vacation, and sick leave., • Complete safety equipment provided, including helmets, gloves, and protective gear., • Ongoing career training, including manufacturer programs, fall protection, OSHA, and lift certifications., • Referral bonus program and engaging company outings and annual events. About Us: JPW Riggers, Inc. is a division of JPW Companies, specializing in commercial and industrial general construction. We pride ourselves on creating long-term career pathways, evidenced by over 25 team members with 20 to 45 years of service. We foster continuous learning and variety, ensuring our crews tackle unique projects in a supportive, growth-oriented environment. Learn more at https://www.jpwcompanies.com/. JPW Riggers, Inc. is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex (including pregnancy, gender expression, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or any other status protected by law or regulations. It is our intention that all qualified applicants be given equal opportunity and that selection decisions be based on job-related factors.

Job Description Turtle is actively searching for an experienced Inside Sales Associate to join our team in Upstate NY. Why Turtle? At Turtle, we’re redefining what it means to be an industry leader in electrical distribution, and we want you to be part of our exciting journey! For over 100 years, we’ve built a reputation for innovation, excellence, and exceptional customer service—and we’re just getting started. We are a diverse, passionate team spread across the US, Canada, Mexico, and Puerto Rico, committed to growth, learning, and creating opportunities for each other. At Turtle, every day is a chance to make a real difference, solve complex challenges, and push the boundaries of what’s possible. We believe in fostering an environment that inspires collaboration and sparks creativity, where employees are empowered to contribute to our mission and shape the future of the industry. If you're looking for a fast-paced, dynamic career where your ideas are valued and your growth is prioritized, Turtle is the place for you. Join us and be a part of a company that’s making waves and empowering its people to do extraordinary things every single day! About the Role The Inside/Counter sales Associate is responsible for generating sales, providing product support, and maintaining strong relationships with customers such as electrical contractors, industrial clients, and commercial buyers. This role involves quoting products, processing orders, and collaborating with outside sales teams to increase revenue. What You'll Do • Respond to customer inquiries via phone and email regarding various products and solutions., • Prepare and deliver price quotations, bids, and proposals., • Assist customers with product selection, availability, and alternatives., • Process sales orders, returns, and product exchanges., • Provide technical product guidance on electrical equipment, components, and systems., • Maintain and grow relationships with electrical contractors, OEMs, and industrial clients., • Coordinate with purchasing, warehouse, and logistics teams to ensure timely delivery., • Support outside sales representatives by managing accounts and identifying upselling opportunities., • Greet customers and provide friendly, professional service at the sales counter., • Stay updated on new electrical products, codes, and industry trends. What You'll Bring • 3+ years relevant experience required, • Ability to negotiate and be persuasive, • Strong attention to detail, • Work independently and within a team, • Highly effective interpersonal and communication skills What We Offer: We offer a competitive benefits package. Some of which include: • 401 (k) plan, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Paid Holidays, • Vacation, • Employee Negotiated Discounts. Who We Are Founded in 1923, Turtle is a fourth-generation, family-owned, and three-generation women-owned business, and one of the nation’s largest independent electrical and industrial distributors. Headquartered in Clark, NJ, our Electrical Distribution division operates 14 branches spanning from coast to coast. It is a significant force in the engineering and procurement of power distribution, automation, lighting, and energy projects, offering integrated services for the industrial and construction markets. Turtle Integrated division provides on-site MRO procurement, cost-saving, and spend analytics across the US and in Canada, Puerto Rico, and Mexico. What To Do Next You can begin by filling out our application online. If you want to learn more about Turtle, please visit our website www.turtle.com or LinkedIn @Turtle Turtle is proud to be is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, gender identity or expression, national origin, disability, genetic information, pregnancy, marital status, military or veteran status, or any other protected characteristic as outlined by federal, state, or local laws.

Job Description Overview Tradesmen International is looking to expand our team of qualified Trade Professionals for current & future projects in and around Syracuse, NY. Most positions are first shift with a pay range up to $34+/hour based on experience & skill level. If you are a Sheet Metal Duct Installer and want to work alongside other proven Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career! Job Scope: • Select types of sheet metal according to building or design plans, • Measure and mark dimensions and reference lines on metal sheets, • Drill holes in metal for screws, bolts, and rivets, • Install Duct Work, • Bend Sheet Metal, • Install & cut metal sheets with supportive frameworks, • Fabricate or alter parts at construction sites, • Maneuver and anchor large sheet metal parts, • Fasten seams or joints by welding, bolting, riveting, or soldering, • Fabrication On-Site or in Shop, • Set Hangers, • Trim, Fit, Hang and Seal Ductwork, • Commercial & Industrial Sheet Work Responsibilities • Basic Tools for the Trade, • Proper PPE must be worn Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Tradesmen+ Rewards Program – earn points for hours worked, • Vacation Pay, • Health insurance, • 401(k) retirement savings plan Tradesmen International is an EO employer - M/F/Veteran/Disability “Be Safe” from fraud! Tradesmen International will never ask you to pay for certifications, equipment, or other “up front” costs as a condition of hire. Similarly, we do not request pictures of documents or IDs to private phone numbers or email addresses. If in doubt, please call or visit your closest Tradesmen office to verify the request. Click here to visit Tradesmen’s full website.

Job DescriptionDescription: The Field Engineer is a highly technical, field-based role responsible for supporting the installation, commissioning, startup, testing, and operational performance of industrial standby and prime power generation systems. This role plays a critical part in ensuring generator systems, paralleling switchgear, automatic transfer switches (ATS), and control systems are installed, commissioned, and operating safely, reliably, and in accordance with design specifications. The Field Engineer works closely with Project Managers, Field Service Technicians, electrical contractors, and customers to deliver high-quality power system installations across Kinsley’s Northeast service territory. Installation Review & Field Execution: • Review electrical one-lines, wiring diagrams, control schematics, and submittals to ensure proper field execution., • Support installation teams in identifying scope gaps, constructability issues, and technical discrepancies., • Conduct site visits to monitor installation progress and document deficiencies. Generator Commissioning & Startup: • Develop and execute pre-functional and functional startup checklists., • Lead commissioning of:, • Diesel and natural gas generator systems, • Paralleling switchgear, • Automatic Transfer Switches (ATS), • Load banks and associated controls, • Document commissioning results and provide turnover packages. Troubleshooting & Technical Support: • Diagnose and resolve complex electrical, mechanical, and control-related issues during startup and post-installation., • Support Field Service Technicians with advanced troubleshooting., • Analyze generator performance data to identify reliability concerns., • Assist in root cause analysis of system failures. Controls & Integration: • Support configuration and testing of:, • Generator controllers, • Paralleling logic and synchronization systems, • Remote monitoring systems, • Ensure proper integration of generators into facility electrical infrastructure. Customer Interface & Training: • Serve as the technical lead during startup and commissioning., • Provide customer training on system operation, emergency procedures, and maintenance requirements., • Deliver clear commissioning documentation and test reports., • Ensure smooth transition from installation to service support. Qualifications: • Equivalent field experience considered., • Experience in industrial generator systems, power distribution, or mission-critical backup power environments., • Strong knowledge of:, • Diesel and natural gas generator systems, • Paralleling switchgear, • ATS systems, • Load bank testing, • Engine controls and protection systems, • Working knowledge of NEC, NFPA 110, OSHA standards., • Proven ability to troubleshoot complex power systems in live environments., • Strong communication and leadership skills in field settings., • Valid driver’s license required. Minimum of seven (7) or more years of experience in industrial generator service, commissioning, troubleshooting, repair, and overhaul. Required experience includes: · Diesel and natural gas generator systems · Paralleling switchgear and synchronization · Automatic Transfer Switches (ATS) · Load bank testing and performance validation · Engine and generator control systems Experience performing system startups, commissioning activities, and advanced troubleshooting in mission-critical environments (e.g., hospitals, data centers, utilities, industrial facilities) strongly preferred. Previous experience leading commissioning efforts, mentoring technicians, or serving as a technical escalation resource is a plus. Travel & Working Conditions: • Significant travel within Kinsley’s service territory, • Work performed in hospitals, data centers, industrial facilities, utilities, and construction environments., • Exposure to energized electrical systems, mechanical equipment, and outdoor conditions., • Ability to lift up to 100 lbs and work in physically demanding environments. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or national origin. Requirements:

Job Description We are LOTTE BIOLOGICS! Delivering Therapies That Enable a Healthier World. A new company, built on 80 years of tradition. We embody our core values of being Inspired by Science, Embracing Diversity, Fostering Talent, and Connecting Lives. Our mission is to be the most trusted partner in the industry, with high standards of quality and continuous innovation, to reliably deliver benefits for patients worldwide. Position Summary The Manager, Process Safety is responsible for leading and continuously improving the site's Process Safety Management (PSM), Electrical Safety, and Energy Control programs. This position serves as the site Subject Matter Expert (SME) for process safety and operational risk management, ensuring compliance with applicable federal, state, and local regulations, industry standards, and company policies while supporting safe, reliable, and compliant manufacturing operations. Additionally, this position will be the lead HSE contributor for maintenance of LOTTE's International Organization for Standardization (ISO) 45001 certification. The position partners closely with Operations, Engineering, Facilities, Maintenance, Quality, Validation, and Corporate HSE to identify, assess, and mitigate risks associated with manufacturing processes, utilities, equipment, and facility operations. This position drives a proactive safety culture through technical expertise, risk-based decision-making, regulatory compliance, and continuous improvement initiatives. This position must comply with all Security requirements, Health, Safety, and Environment (HSE) regulations, and current Good Manufacturing Practices (cGMPs) applicable to the job function. Duties & Responsibilities • Serve as the site Subject Matter Expert (SME) for Process Safety Management (PSM), Electrical Safety, and Energy Control (LOTO) programs., • Lead the implementation, maintenance, and continuous improvement of site Process Safety Management programs to ensure compliance with OSHA PSM, EPA Risk Management Program (RMP), NFPA requirements, and company standards., • Facilitate Process Hazard Analyses (PHA), HAZOP studies, risk assessments, and other structured hazard evaluation processes to identify, assess, and mitigate operational risks., • Manage the site's Management of Change (MOC) program, ensuring health, safety, environmental, quality, and operational risks are appropriately evaluated and controlled prior to implementation., • Partner with Operations, Engineering, Facilities, Maintenance, and Quality teams to integrate process safety principles into manufacturing operations and business processes., • Support the design, installation, startup, qualification, and modification of manufacturing equipment, utility systems, facilities, and processes to ensure safety and regulatory requirements are met., • Administer and continuously improve Electrical Safety and Energy Control programs, including Arc Flash assessments, Lockout/Tagout compliance, training programs, and risk mitigation activities., • Lead process safety reviews associated with new technologies, capital projects, process modifications, and equipment installations.\, • Coordinate internal and external ISO45001 audits with third-party consultants and internal resources. Contribute to other ISO certifications as assigned., • Execute industrial hygiene exposure monitoring in coordination with the site's Industrial Hygienist., • Act as the HSE representative for client projects as assigned., • Conduct compliance audits, inspections, program assessments, and field observations to evaluate effectiveness of safety controls and identify opportunities for improvement., • Lead or facilitate incident investigations, root cause analyses, and development of corrective and preventive actions (CAPAs) related to safety, process safety, and operational events., • Monitor, analyze, and report process safety and HSE metrics, key performance indicators (KPIs), and leading indicators to drive continuous improvement., • Maintain regulatory records, compliance documentation, and required reports for internal and external stakeholders., • Support contractor safety and qualification programs to ensure adherence to company safety requirements and industry best practices., • Serve as a site representative during regulatory inspections, customer audits, and corporate assessments related to process safety and HSE compliance., • Deliver technical training, coaching, and guidance on process safety, hazard recognition, risk mitigation, and regulatory requirements., • Participate in emergency response planning and provide technical support during emergency events and operational incidents., • Stay current with emerging process safety technologies, regulatory developments, and industry best practices to enhance site performance., • Support the Senior Manager, HSE with departmental objectives, strategic initiatives, budgeting activities, and continuous improvement efforts., • Participate on cross-functional teams, committees, and corporate initiatives as required., • Perform other duties as assigned. Education & Experience • Bachelor's degree in Environmental Health & Safety, Engineering, Industrial Hygiene, Chemistry, Biology, Occupational Health, or a related discipline required., • 7+ years of experience in Process Safety, Health, Safety & Environment (HSE), Operational Risk Management, or HSE program leadership within pharmaceutical, biologics, biotechnology, chemical, or other highly regulated manufacturing environments., • Demonstrated success leading risk assessments, process safety initiatives, incident investigations, and regulatory compliance programs., • Experience supporting enterprise-wide process safety and operational risk initiatives across complex manufacturing operations., • Professional certification such as: Certified Safety Professional (CSP), Certified Industrial Hygienist (CIH), Certified Process Safety Professional (CCPSC), or an equivalent credential preferred., • Knowledge of Arc Flash hazards, electrical safety, and NFPA 70E compliance programs preferred. Knowledge, Skills, Abilities • Strong knowledge of OSHA Process Safety Management (PSM), EPA Risk Management Program (RMP), NFPA standards, Electrical Safety, and Energy Control (LOTO) requirements., • Experience conducting Process Hazard Analyses (PHA), HAZOPs, risk assessments, incident investigations, and Management of Change (MOC) reviews., • Experience with the ISO45001 standard and maintaining a certified occupational health and safety management system., • Familiarity with standard industrial hygiene monitoring techniques including noise dosimetry, air sampling, and real-time monitoring instruments., • Working knowledge of cGMP requirements and pharmaceutical, biologics, biotechnology, or regulated manufacturing environments., • Strong understanding of risk management methodologies and operational excellence principles., • Ability to analyze complex technical issues and develop practical risk-based solutions., • Strong leadership, project management, organizational, and influencing skills., • Excellent written, verbal, and presentation communication skills., • Proficiency with Microsoft Office applications and HSE management systems., • Experience utilizing data analytics, performance metrics, and reporting tools to drive continuous improvement., • Ability to work independently and effectively within cross-functional teams., • Korean language proficiency is beneficial but not required. Physical Demands • Ability to sit, stand, walk, climb stairs and ladders, and traverse manufacturing, utility, warehouse, and office areas for extended periods., • Ability to conduct field inspections, audits, risk assessments, and incident investigations in operating manufacturing environments., • Ability to wear required personal protective equipment (PPE) and comply with site safety requirements., • Ability to lift, carry, push, and pull up to 25 pounds occasionally., • Ability to access confined or restricted industrial spaces, elevated work areas, and outdoor locations when required and in accordance with site safety procedures., • Ability to respond to emergencies, incidents, and business-critical situations, including occasional after-hours support for a 24/7 manufacturing operation., • Ability to travel between facilities and vendor or contractor locations as business needs require. Work Environment • This position operates in both office and manufacturing environments., • Routine exposure to active production, utility, laboratory, warehouse, and construction areas should be expected., • Position is based on a manufacturing campus and requires frequent presence in operational areas to support risk assessments, inspections, audits, investigations, and safety initiatives., • Work may involve exposure to noise, moving mechanical equipment, chemicals, temperature variations, and other industrial conditions typical of pharmaceutical and biotechnology manufacturing facilities., • Access to GMP and classified manufacturing areas is required and may necessitate the use of appropriate PPE, including safety glasses, hearing protection, safety footwear, hard hats, respirators, and other site-required protective equipment., • Occasional work outside of normal business hours may be required to support incident response, project activities, shutdowns, or a 24/7 manufacturing operation. Travel Less than 5% travel is required for this position. Target Bonus 10% Work Location: East Syracuse, NY New York Pay Range $76,000—$113,000 USD We are an Equal Employment Opportunity ("EEO") Employer. We believe that women, people of color, veterans and LGBTQ communities must participate in the work we do, so we strongly encourage applications from people with these identities or who are members of underrepresented communities! If this is the work that you want to do, in a culture of inclusion and excellence with the goal of making our world to be a healthier place, then please apply today!

Job Description Northeast Dock & Door, a Division of Thompson & Johnson Equipment Part Time | Monday through Friday | 9:00 a.m. to 1:00 p.m. | $23.00 to $25.00 per Hour Join a Company Where Your Work Makes a Difference Since 1954, Thompson & Johnson Equipment has built its reputation by investing in its employees, supporting its customers, and Delivering Our Promise every day. As a family-owned company, we believe our employees are our greatest asset. We are committed to providing a workplace where people are respected, supported, encouraged to grow, and given opportunities to make a meaningful contribution. Northeast Dock & Door (NEDD) is a division of Thompson & Johnson Equipment specializing in dock and door equipment, products, service, and solutions for commercial and industrial customers. As our NEDD division continues to grow, we're adding a part time Dock & Door Service Writer to support our service operations and customers throughout the division. If you're organized, enjoy working with customers, have strong follow through, and like seeing a project move from recommendation to completion, we'd love to hear from you. Position Overview The Dock & Door Service Writer plays an important role in turning technician recommendations and customer service needs into clear, accurate repair proposals. You'll research information needed to prepare service quotes, communicate proposals to customers, follow up on outstanding quotes, obtain approvals and purchase orders, and work with our NEDD employees to help move approved repairs into the service process. This position is a great fit for someone who enjoys both customer interaction and detailed administrative work. You'll need to be comfortable picking up the phone, discussing recommended repairs with customers, following up when you haven't received a response, and asking customers if they're ready to move forward with the work. What You'll Do • Review technician recommendations, PM reports, service calls, and customer requests that require repair quotes., • Research parts, materials, labor, and other information needed to prepare accurate proposals., • Work with technicians, Parts, suppliers, and other employees to gather information for quotes., • Prepare clear and accurate customer service proposals., • Communicate recommended repairs and proposals to customers., • Follow up consistently on outstanding quotes., • Answer customer questions and obtain authorization to proceed with approved work., • Obtain required customer purchase orders., • Communicate approved repairs to Dispatch and other appropriate NEDD employees., • Help ensure approved work moves efficiently into the scheduling and service process., • Maintain accurate records of quotes, approvals, declined work, and customer communication., • Answer incoming calls and assist with other service-related responsibilities as needed. What You'll Bring We're looking for someone who has: • Strong customer service and interpersonal skills., • Excellent verbal and written communication skills., • Confidence communicating with customers by phone and email., • Strong organization, attention to detail, and follow through., • The ability to manage multiple quotes and priorities at the same time., • Basic mechanical aptitude or an interest in learning about Dock & Door equipment and repair processes., • The ability to understand information from technicians and turn it into an accurate customer proposal., • Comfort following up with customers and asking for approval to proceed with recommended repairs., • Proficiency with email, word processing, spreadsheets, and computer based systems., • A high school diploma or equivalent., • Customer service, service writing, parts, mechanical repair, industrial service, or related experience is preferred., • Dock & Door, industrial equipment, material handling, construction, or related experience is a plus. Schedule & Pay This is a part time position with an anticipated schedule of Monday through Friday, 9:00 a.m. to 1:00 p.m. Pay Range: $23.00 to $25.00 per hour, depending on experience. Why You'll Be Successful at Thompson & Johnson At Thompson & Johnson, we're looking for more than experience. We're looking for people who share our commitment to outstanding customer service and supporting one another. Successful employees: • Bring a positive attitude to work each day., • Demonstrate dependability, accountability, and professionalism., • Communicate respectfully with customers and coworkers., • Take ownership and consistently follow through on commitments., • Pay attention to details while keeping the bigger picture in mind., • Are comfortable reaching out to customers rather than waiting for customers to call., • Work collaboratively to solve problems and support the customer., • Continue learning and looking for ways to improve., • Help us Deliver Our Promise every day. Part Time Benefits We believe part time employees are an important part of Thompson & Johnson and should share in many of the benefits and experiences we provide our employees. This position includes: • 401(k) retirement plan with a 50% Company match on the first 5% contributed., • Paid vacation time based on regularly scheduled hours., • Paid sick time based on regularly scheduled hours., • Paid Company holidays when the holiday falls on a day the employee is normally scheduled to work, based on the employee's normal scheduled hours for that day., • Company clothing allowance., • Opportunities for training and professional development., • Participation in Company events, including our annual employee celebration, which alternates between the Clambake and Dinner Dance Gala., • A supportive, family-oriented work environment where employees are valued and respected. Part time employees working fewer than 30 hours per week are not eligible for medical, dental, vision, disability, life insurance, or floating holidays. Build Your Career with Thompson & Johnson At Thompson & Johnson, every employee plays an important role in our success. We believe great people build great relationships, and we're committed to creating an environment where employees can contribute, continue learning, and take pride in the work they do. If you're looking for a part time opportunity where you can use your customer service, organization, and problem-solving skills while learning a unique industry, we encourage you to apply. We'd love the opportunity to meet you and show you what makes Thompson & Johnson a great place to work. Equal Employment Opportunity Thompson & Johnson Equipment Co., Inc. is proud to be an Equal Opportunity Employer. We are committed to creating a workplace where all employees are treated with dignity and respect and where employment decisions are based on qualifications, merit, and business needs.

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn, and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Diversity, equity, inclusion, and belonging are a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S is currently seeking a Senior Project Engineer to join our Fuel Facility team. Location at a C&S office is preferred; however, a remote location is negotiable. Full-Time is Preferred; however, Part-Time is negotiable. The Senior Project Engineer is expected to have good relationships with clients and professionals in the fueling systems industry and will be responsible for generating project opportunities and managing fueling systems projects. In this role, the Senior Project Engineer will work with our multi-disciplinary design team to deliver projects in the aviation, automotive, and related fueling systems markets. Position Responsibilities • Develop effort budgets and schedules for prospective project pursuits., • Develop working relationships with existing and prospective clients and professionals., • Generate project opportunities., • Develop and optimize processes for improved efficiency, sustainability, and cost-effectiveness. Apply advanced problem-solving techniques and tools to enhance process design and operations., • Ensure all engineering projects comply with applicable codes, standards, and regulations. Maintain an up-to-date knowledge base of industry standards and government regulations., • Implement and oversee quality assurance protocols to maintain the quality of engineering outputs. Conduct reviews and audits of project deliverables to ensure technical accuracy and integrity., • Champion safety protocols and risk management practices throughout project lifecycles. Analyze potential risks and develop mitigation strategies to prevent accidents and operational failures., • Develop P&IDs for, but not limited to: Aviation Fueling Systems, Automotive Fueling Systems, Heating Oil Systems, and Emergency Generator Systems., • Communicate effectively with all stakeholders, including management, clients, regulatory bodies, and project teams, ensuring clear and consistent communication regarding project progress and issues., • Mentor less experienced engineers and support their professional development., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Communicate incidents, accidents, near misses, potential hazards, and unsafe working conditions to a supervisor or the Health and Safety Department as soon as identified. Skills/Education/Experience • Minimum bachelor’s degree in mechanical, environmental, or industrial engineering or other similar degree., • Minimum 10 years’ experience working on flammable and combustible liquids fueling systems projects., • Professional Engineer (PE) license preferred or willing to pursue PE license., • Understanding of flammable and combustible liquids engineering principles, methodologies, and tools., • Ability to analyze complex engineering problems and develop effective solutions., • Comprehensive knowledge of relevant industry standards, safety regulations, and environmental laws., • Ability to write sequence of operation processes with P&IDs., • Excellent verbal and written communication skills, capable of effectively articulating technical information to non-technical stakeholders and writing detailed reports., • Efficient in; Bluebeam (or other PDF reader), Microsoft Word, Microsoft Excel, and Microsoft Outlook., • Preferred experience in; AutoCAD, and/or Revit. Estimated Compensation Range and Benefits $120,000 - $140,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job DescriptionPosition: Structural Engineer in Syracuse, NY Salary: Depends on experience Structural Engineer Position Overview We are seeking a motivated Structural Engineer with 5+ years of experience to join our growing engineering team. This position offers the opportunity to work on a variety of building projects, collaborating with experienced professionals to develop efficient, safe, and cost-effective structural designs. The ideal candidate is self-motivated, detail-oriented, and capable of managing multiple projects while delivering high-quality engineering solutions. Key Responsibilities • Develop effective structural design solutions for a variety of building projects., • Perform structural analysis and engineering calculations for structural systems., • Create and maintain structural computer models using industry-standard software., • Prepare and review engineering calculations, reports, and technical documentation., • Coordinate and oversee the preparation of structural construction drawings and specifications., • Collaborate with project teams to ensure designs meet project requirements, applicable codes, and industry standards., • Manage multiple projects simultaneously while meeting project schedules and deadlines., • Provide technical support throughout the design and construction process. Required Qualifications • Bachelor's degree in Civil Engineering, Structural Engineering, or a related engineering discipline., • Minimum of 5 years of structural engineering experience., • Successful completion of the Fundamentals of Engineering (FE) Exam is required., • Experience with structural analysis and design software., • Working knowledge of Revit and AutoCAD., • Strong technical writing skills for engineering reports and project documentation., • Excellent analytical, problem-solving, and organizational skills., • Ability to manage multiple projects in a fast-paced environment., • Strong communication and teamwork skills. Preferred Qualifications • Master's degree in Structural Engineering or a related field., • Experience designing a variety of commercial, residential, institutional, or industrial structures., • Knowledge of applicable building codes and engineering standards. Benefits • Overtime pay, • Medical insurance, • Dental insurance (employee-paid), • 401(k) with profit sharing, • Potential tuition reimbursement for approved graduate-level coursework, • Opportunities for professional growth and career development

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview We are seeking a Managing Mechanical Engineer to join a multi-disciplinary team in our Mechanical Department. We offer full service in-house architecture/engineering design capabilities and typically work on a diverse array of projects including Higher Education, Municipal Facilities, Industrial, Design-build, Aviation and Healthcare. Responsibilities include working on all phases of projects such as client relationships, design, specifications, project team coordination, construction documents, code analysis and consultant interaction. Required Knowledge, Skills & Abilities • 10+ years of related mechanical/HVAC design and project management experience., • Bachelor’s degree in mechanical engineering, • Professional licensure PE is preferred, • Comprehensive understanding of design and construction documents., • Proficiency in CADD & REVIT., • Knowledge of building codes., • Ability to succeed in small and large multi-disciplinary team environments., • Ability to set deadlines, assign resources, monitor/summarize project progress., • Good graphic, communications (verbal and written) and presentation skills., • Self-motivated with ability to lead small and large project teams and multiple projects from concept to construction., • Higher Education and Healthcare experience, • Experience working with both private and public clients Estimated Compensation Range and Benefits $100,000 - $150,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job DescriptionDescription: Outside Sales Representative Competitive Base Salary + Commission & Incentives - Earn from $70,000 - $110,000 annually! Monday – Friday Schedule Health, Dental, Vision, 401(k) w/Match, PTO and More! Join a Team that Powers Possibility! At Haun Welding Supply & Specialty Gases, we’ve been proudly supporting customers across New York and the Northeast since 1958—delivering quality, safety, and service you can depend on. We’re more than a supplier; we’re a team driven by Helpfulness, Humility, Heart, and Honesty—the values that make us who we are. We're seeking an experienced Outside Sales Representative with industry knowledge in welding, industrial gases, metal fabrication, or related industrial markets to support and grow the assigned territory. This role is ideal for a motivated sales professional who understands industrial customer needs, thrives on building relationships, uncovers new opportunities, and helps customers succeed through innovative welding and industrial solutions. The ideal candidate brings both proven outside sales success and a strong understanding of the welding and industrial supply industry. What You’ll Do As an Outside Sales Representative, you’ll play a key role in driving profitable growth and strengthening customer partnerships. You’ll: • Grow territory sales and profitability through expansion of existing accounts and acquisition of new customers, • Identify new sales opportunities through prospecting, cold calling, and lead follow-up, • Develop and promote welding equipment sales and rental solutions within your assigned region, • Prepare quotes, deliver presentations, and provide consistent customer follow-up, • Build strong relationships with customer stakeholders across all departments, • Actively manage and support customers’ cylinder inventory programs, • Review customer operations and recommend process or equipment improvements as opportunities arise, • Collaborate with internal sales and support teams to exceed customer expectationsRequirements: What You’ll Bring If you’re a driven sales professional who values relationships, accountability, and delivering real solutions to customers, we’d love to hear from you. • High school diploma or equivalent required; associate or bachelor’s degree preferred, • Experience in an industrial, manufacturing, or construction-related environment, • Proven sales success with measurable results, • Strong technical aptitude paired with excellent interpersonal and organizational skills, • Sales experience in welding equipment or industrial equipment rental preferred, • Working knowledge of welding applications, positioning equipment, and related technologies is a plus, • Ability to manage multiple priorities and work independently in a fast-paced environment, • Strong customer focus with a passion for building long-term relationships, • A commitment to uphold Haun values: Helpful, Humble, Heart-driven, and Honest, • Ability to develop and execute territory, market, and business plans Haun Welding Supply & Specialty Gases is proud to be an Equal Opportunity Employer. We value diversity and are committed to fostering an inclusive workplace where all employees and applicants are treated with respect. We do not discriminate or tolerate harassment based on race, color, religion, national origin, sex, genetics, disability status, sexual orientation, gender identity or expression, protected veteran status, or any other characteristic protected by law. This policy applies to all employment-related activities, from application and hiring through ongoing employment.

Job Description Commercial Construction Estimator Job Summary: The Construction Estimator is responsible for preparing accurate and detailed cost estimates for construction projects. This role involves analyzing project plans, specifications, and requirements to determine the total cost of materials, labor, equipment, and subcontractor services. The Estimator works closely with project managers, engineers, and subcontractors to ensure competitive, thorough, and timely bids. Key Responsibilities: • Review and interpret architectural and engineering drawings, specifications, and project scope., • Prepare detailed cost estimates for all phases of construction, including site work, building, finishes, and MEP systems., • Solicit and analyze subcontractor and supplier quotations to ensure accuracy and competitiveness., • Develop quantity take-offs using plans and digital estimating tools., • Identify potential cost savings, value engineering opportunities, and risk factors., • Collaborate with project managers and clients to clarify project requirements and expectations., • Maintain an updated database of unit costs, material prices, and subcontractor lists., • Assist in the preparation of bid proposals, budgets, and change order pricing., • Participate in project handoff meetings to ensure accurate transfer of estimate data to project teams., • Stay informed about industry trends, market pricing, and construction methods. Qualifications: • Bachelor’s degree in Construction Management, Engineering, Architecture, or related field (preferred)., • 3+ years of estimating experience in commercial, residential, or industrial construction., • Strong knowledge of construction methods, materials, and building codes., • Proficiency with estimating software, • Excellent analytical, mathematical, and organizational skills., • Ability to read and interpret blueprints and technical documents., • Strong communication and negotiation skills., • High attention to detail and ability to meet tight deadlines. Physical Requirements: • Office-based with occasional site visits., • Ability to sit, stand, and walk for extended periods and review plans/drawings., • May require use of personal protective equipment (PPE) during site visits.\nCompany Description Pioneer Companies is a privately held real estate owner; operator, property manager and developer with headquarter offices in Syracuse, New York and offices in Rochester and East Hampton, New York. Over its 50-year history, we have established ourselves as a full service, vertically integrated company with acquisition, leasing, development, construction management, property management, brokerage, asset management, receivership, legal, accounting, and finance functions tailored to meet the needs of our clients, both internally and for third parties. Pioneer has built and owned properties of all types in over 22 states throughout the country. Pioneer Companies is a privately held real estate owner; operator, property manager and developer with headquarter offices in Syracuse, New York and offices in Rochester and East Hampton, New York. Over its 50-year history, we have established ourselves as a full service, vertically integrated company with acquisition, leasing, development, construction management, property management, brokerage, asset management, receivership, legal, accounting, and finance functions tailored to meet the needs of our clients, both internally and for third parties. Pioneer has built and owned properties of all types in over 22 states throughout the country.

Job Description Fire Protection Consultant Location: Remote, New England and New York Salary Range: $120,000 to $150,000, depending on experience and qualifications A well-established multi-discipline engineering practice is looking for a Fire Protection Consultant to join its team on a remote basis within New England or New York. This is a permanent, full-time role with real room to grow, working alongside a collaborative group of engineers across multiple disciplines on a varied and interesting project portfolio. Why Consider This Opportunity? This is a firm with a strong culture built on loyalty, technical quality, and looking after its people. You would be joining a tight-knit fire protection team where your contribution is visible from day one, with direct access to leadership and genuine influence over the direction of the department. The work spans a mix of sectors including industrial, commercial, and healthcare, covering both code consulting and fire protection systems design. If you are looking for variety, responsibility, and the chance to be part of something that is growing, this is worth a conversation. Key Responsibilities • Conduct fire and life safety code analyses, building code evaluations, and plan reviews across a range of facility types., • Prepare fire protection system design documents, including hydraulic calculations and preliminary system layouts and specifications., • Coordinate with civil, structural, electrical, and mechanical teams on multidisciplinary projects., • Carry out construction administration reviews and periodic site visits., • Develop fire protection strategies and code alternatives in collaboration with project teams and clients., • Prepare and review technical reports and project documentation., • Build and maintain client relationships as a trusted technical resource. Qualifications • Bachelor's degree in Fire Protection Engineering, or a related engineering discipline (Mechanical, Electrical, Civil, Chemical)., • 3-10+ years of relevant experience in fire protection engineering, life safety code consulting, or a combination of both., • PE designation preferred, or on track for licensure., • Comfortable working independently and managing your own workload in a consulting environment., • Strong communication skills, with the ability to work directly with clients, contractors, and authorities having jurisdiction. Additional Details • Annual performance bonus of up to 10%, • 100% company-paid health insurance, • Summer half-day Fridays, • Support for professional development and continuing educationWe thank all applicants for their interest, however, only those under consideration will be contacted.

Job Description We are looking to hire an experienced estimator to determine the approximate costs of projects for industrial and residential projects. The estimator’s responsibilities include determining how long each contracting job will last, researching market prices for project materials and equipment, and communicating with clients to determine the scope of each project. You should also be able to identify ways to continually improve cost-estimating procedures to reduce inconsistencies between estimated and actual project costs. To be successful as a commercial construction estimator, you should be detail-oriented and have sound knowledge of building codes. Ultimately, an exceptional Estimator should be adept at reading building plans and demonstrate outstanding analytical and problem-solving skills. • Quantity Takeoff analyzing blueprints to determine wire lengths, determining the amount, type, and cost of materials needed for each project., • Determining the amount of labor required to complete each project., • Obtaining pricing from Vendors and Subcontractors for Bids., • Submitting RFI’s during bidding period., • Obtaining Bid bonds when required., • Populating Bid Forms and Bid Breakdowns., • Preparation of MWBE Bid documents., • Assisting Project Managers with Change Order Pricing., • Participating in Value Engineering exercises., • Determining the potential profitability of projects to assist management in making sound bidding decisions., • Providing viable solutions to increase project profitability., • Completing and submitting competitive project bids in accordance with established guidelines., • Descoping Vendors and Subcontractors., • Regularly participating in updating cost databases to accurately reflect fluctuating material and labor costs., • Evaluating labor and material costs to determine whether it is more feasible to construct components or sub-contract the construction of components., • Conduct post project reviews to determine areas for future improvement., • Develop/maintain network of professional relationships within our industry., • Participating in the Design Build and Design Assist processes., • Handing off Bid to Project Management., • Proficient in Plan Swift Software, • Proficient in Microsoft Office Product Suite

Job DescriptionJob Description The work involves responsibility for the instruction and training of governmental employees in vehicles and occupational safety. The work is carried out in accordance with federal and local regulations and involves the identification of safety problems, the design and implementation of safety programs, as well as conducting training and safety courses to ensure that local governmental employees follow standard safety practices and procedures in carrying out their work assignments. Work is reviewed by an administrative superior who allows the incumbent considerable latitude for the exercise of independent judgment in the design and implementation of safety programs. When assigned to Onondaga County Department of Transportation, an employee in this class is primarily responsible for vehicular safety and safety practices concerned with highway maintenance and construction. The work may include laying out and supervising the work of subordinates as well as participating in and sharing in the work assigned. Reviews of work procedures are performed to ensure compliance with safety rules and regulations from interdepartmental supervisory personnel. Does related work as required. Typical Work Activities • Identifies present and potential safety problems by inspecting departmental operations and informing the employees of safety hazards., • Informs department heads and other supervisory personnel of operating procedures not in compliance with safety guidelines and works with them to establish standard operating procedures incorporating needed safety precautions into operations., • Designs safety programs upon the occurrence of dangerous situations by researching available data on safety procedures applicable to respective departmental functions and determines what training resources to utilize based upon safety hazards observed., • Performs full inspections and works with supervisory personnel to ensure ongoing compliance with safety program and safety regulations., • Conducts safe driving courses by giving classroom and field instructions to personnel and depending on assignment, conducts courses in such areas as driving tactics in normal speed, crash avoidance, emergency braking, skidding and blowout procedures, snowplow driver training, wing man training, defensive driving course instruction, pre-trip and post-trip inspections., • Trains employees in the safe ways to operate lawn mowers, jack hammers, chain saws, trucks, construction equipment and all other motor and motor-driven equipment operated in government., • Conducts research and statistical studies to determine causes of accidents and to outline the effects safety programs have on accident prevention in government., • Recommends the purchase of equipment to maximize the safety of the public and its employees., • May conduct on-the-road-training and instructional training for employees who want to increase driving skills, train for license upgrades, train for a specific certified driver's license or specific endorsement(s).Knowledge, Skills, and Abilities, • Good knowledge of federal, state and local laws, rules and regulations regarding occupational and vehicle safety health hazards., • Good knowledge of the principles, practices and methods employed in occupational and vehicle safety., • Good knowledge of recent developments, current literature, and sources of information relating to occupational and vehicle safety programs., • Good knowledge of principles, practices and techniques involved in safety training and instruction., • Skill in the safe operation of all vehicles, mechanical, plumbing, electrical and other industrial motor and motor driven equipment operated in municipal government., • Ability to make detailed field inspections and to recognize potential safety and health hazards., • Ability to instruct individuals and assess their capabilities in a practical situation., • Ability to enforce regulations firmly, tactfully and objectively., • Ability to deal effectively with department heads, supervisory personnel, other employees and the public., • Ability to plan, supervise and organize the work of others., • Ability to keep records and make reports.Minimum Qualifications Promotional: • One (1) year of permanent class status in the title of Equipment Operator Instructor; or, • Three (3) years of permanent non-competitive class status in the title of Highway Maintenance Worker II. Open Competitive: • A) Two (2) years of work experience, or its part-time equivalent, in developing and presenting instruction in safety programs, at least one (1) year of which must have involved vehicle and equipment safety; or, • B) Two (2) years of work experience, or its part-time equivalent, in training and evaluating in the operation and maintenance of complex heavy construction equipment or trucks over thirteen tons in weight. Must have certification by a recognized institute in training/evaluating on equipment used.Special Necessary Requirement Possession of a valid New York State CDL, including any special endorsements, as required for the type of vehicle being operated. Where possession of a license is required, eligibility for and continued possession of the license is required for employment. Possession of Excavator Certification is required to perform excavation duties in accordance with New York State General Business Law. Certification must be obtained during the probationary period. Training will commence upon appointment. Eligibility for and continued possession of the license is required for employment. Benefits • Dental insurance, • Health insurance, • Paid time off, • Parental leave, • Vision insurance, • Retirement plan The Affirmative Action Policy of the City of Syracuse is to provide equal employment opportunity for all individuals regardless of race, color, sex, religion, creed, age (18 and over), marital status, national origin, disability, veteran status, gender identity or gender expression, sexual or affectional preference or orientation, or any other classified group within the protected class. The City also complies with 31 CFR part 51. If you have a disability for which you wish special accommodation to be made, contact the Office of Human Resources at 315-448-8780 or personnel@syr.gov. All offers of employment will be contingent on the successful completion of a background check and/or drug screen. Job Posted by ApplicantPro

Job Description At McFarland Johnson (MJ), you’ll own your future. We're a 100% employee-owned firm with 80 years of experience delivering innovative engineering, planning, environmental, technology, and construction solutions that make a lasting impact on the clients and communities we serve. Certified as a Great Place to Work, our employee-owners describe MJ's culture as collaborative, people-focused, and supportive. Join us, and help shape the future of infrastructure together. We’re looking for a Senior Mechanical Engineer to join our growing Facilities division in Syracuse, NY. This is more than just a job – it’s a chance to shape your career, grow alongside a collaborative team, and help design the future of infrastructure solutions across the country. Position Summary The Senior Mechanical Engineer will lead the design and analysis of HVAC, plumbing, and mechanical building systems for a diverse range of commercial, industrial, and institutional projects. In this role, you will manage all phases of project delivery, from planning and design to construction administration. Additionally, you will serve as the primary client contact and provide technical mentorship to junior staff. Key Responsibilities • Lead the design and analysis of HVAC, plumbing, mechanical, and building systems for complex infrastructure and facilities projects., • Serve as the primary point of contact for clients, managing relationships and ensuring project goals are met on time and within budget., • Oversee all project phases, including planning, design, specifications, construction documents, bidding, and construction administration., • Mentor and provide technical guidance to junior engineers and project staff., • Coordinate across multidisciplinary teams, including electrical, architectural, and civil disciplines., • Conduct code analysis and ensure compliance with applicable standards and regulations. Qualifications & Skills • Bachelor's Degree in Mechanical Engineering or related field required., • PE licensure preferred; EIT considered for candidates actively pursuing licensure., • 6 to 12 years of mechanical design experience in commercial, industrial, and institutional building facilities., • Strong working knowledge of Revit MEP, AutoCAD, and MS Office., • Demonstrated ability to manage project budgets, schedules, and client relationships., • Superior organizational and interpersonal skills with the ability to work effectively across multidisciplinary teams., • Sustainable design experience with LEED accreditation a plus. Why Join Us? • Career Growth: Accelerate your professional career with opportunities to lead, learn, and expand your expertise., • Collaborative Culture: Work alongside multidisciplinary teams that thrive on creativity, support, and teamwork. Collaborative is the most frequent word used to describe MJ’s culture in the annual employee survey., • Employee Ownership: As a 100% ESOP, your contributions directly shape our shared success – you own your future., • Innovation & Impact: Work on projects that push boundaries, drive sustainability, and create real-world solutions., • Professional Development: From mentorship, ongoing technical training, and conferences we invest in your growth every step of the way., • Work-Life Balance: Enjoy flexible schedules, generous PTO, and a culture that values balance so you can thrive both professionally and personally., • Shape the next generation: For experienced professionals, MJ offers the chance to mentor emerging talent, share your expertise, and leave a lasting legacy in the industry. Benefits & Perks • Competitive base salary starting at $45/hr plus performance-based incentive payment plan/bonus structure, • Comprehensive benefits package, including medical, dental, and vision coverage., • Generous Paid Time Off, including Parental Leave., • Company-funded ESOP + 401(k) employer match., • Ongoing technical training and professional development opportunities. Join Us and Make a Difference Join a team where your work has purpose, your ideas are valued, and your growth is personal. Apply today and become a part of a company where you can #ownyourfuture.

Job Description Turtle is actively searching for an experienced Outside Sales Associate to join our team in Upstate, NY Why Turtle? At Turtle, we’re redefining what it means to be an industry leader in electrical distribution, and we want you to be part of our exciting journey! For over 100 years, we’ve built a reputation for innovation, excellence, and exceptional customer service—and we’re just getting started. We are a diverse, passionate team spread across the US, Canada, Mexico, and Puerto Rico, committed to growth, learning, and creating opportunities for each other. At Turtle, every day is a chance to make a real difference, solve complex challenges, and push the boundaries of what’s possible. We believe in fostering an environment that inspires collaboration and sparks creativity, where employees are empowered to contribute to our mission and shape the future of the industry. If you're looking for a fast-paced, dynamic career where your ideas are valued and your growth is prioritized, Turtle is the place for you. Join us and be a part of a company that’s making waves and empowering its people to do extraordinary things every single day! About the Role The Outside Sales Associate will exhibit a positive, friendly and helpful attitude with customers, have the ability to manage and grow existing accounts, and pursue new business accounts. Pay: $120,000-150,000/uncapped commission What You'll Do • Selling, marketing, promoting, and demonstrating products, • Increasing business by generating sales to new customers and by selling additional products to existing customers, • Pursuing product applications by utilizing personal knowledge, internal specialist/resources, vendor representatives and other available sources., • Establishing and maintaining customer relationships., • Learning and evaluating customer operations to aid in identifying customer objectives, requirements, and preferences., • Processing product quotations in conjunction with inside sales counterparts and provide continuous follow up throughout the completion of the customer’s purchasing cycle., • This position will require travel within an assigned territory. Must be able to operate a motor vehicle and have a current driver’s license and good driving record. What You'll Bring • High School Diploma or equivalent, • Industrial and/or Commercial experience preferred., • Strong leadership and organizational skills., • Excellent negotiation skills, interpersonal skills, and the ability to drive decisions with influence., • Lighting and Gear product and application knowledge preferred, • Excellent written and oral communication skills., • Experience with at least one sales area:, • Industrial, • OEM, • Automation, • Lighting, • Power Distribution, • Commodities, • Energy What We Offer: We offer a competitive benefits package. Some of which include: • 401 (k) plan, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Paid Holidays, • Vacation, • Employee Negotiated Discounts. Who We Are Founded in 1923, Turtle is a fourth-generation, family-owned, and three-generation women-owned business, and one of the nation’s largest independent electrical and industrial distributors. Headquartered in Clark, NJ, our Electrical Distribution division operates 14 branches spanning from coast to coast. It is a significant force in the engineering and procurement of power distribution, automation, lighting, and energy projects, offering integrated services for the industrial and construction markets. Turtle Integrated division provides on-site MRO procurement, cost-saving, and spend analytics across the US and in Canada, Puerto Rico, and Mexico. What To Do Next You can begin by filling out our application online. If you want to learn more about Turtle, please visit our website www.turtle.com or LinkedIn: @Turtle Turtle is proud to be is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, gender identity or expression, national origin, disability, genetic information, pregnancy, marital status, military or veteran status, or any other protected characteristic as outlined by federal, state, or local laws.

Job Description Counter Sales Associate – Wholesale Electrical Supply We're seeking an energetic, dependable individual who enjoys working with people, solving problems, and being part of a fast-paced team. Experience in electrical distribution is preferred, but we also welcome candidates with strong customer service, sales, construction, or trades experience who are eager to learn. What You'll Do • Assist electricians, contractors, builders, maintenance professionals, commercial accounts, and homeowners at the sales counter., • Help customers identify the right products for their projects and provide knowledgeable solutions., • Process sales orders, quotations, returns, and special orders accurately and efficiently., • Answer customer phone calls and respond to product availability and pricing inquiries., • Coordinate with warehouse staff to ensure orders are picked accurately and ready for pickup or delivery., • Build lasting customer relationships through friendly, dependable service., • Stay up to date on new products and industry trends to better serve customers., • Help maintain a clean, organized, and professional sales counter and showroom. What We're Looking For • Previous customer service, retail, or sales experience., • Electrical supply, construction, industrial, HVAC, plumbing, or lighting experience is a plus., • Strong communication, organizational, and computer skills., • Ability to multitask in a fast-paced environment., • A positive attitude, strong work ethic, and team-oriented mindset., • Dependable, professional, and committed to providing exceptional customer service. What We Offer • Competitive pay based on experience., • 401(k) with company participation., • Performance-based bonus opportunities., • Health insurance and paid time off., • Paid training and ongoing professional development., • Opportunities for advancement within a growing company. \nCompany Description Edward Joy Electric is a locally owned electrical and lighting distributor serving Central New York. We take pride in providing quality products, excellent service, and a supportive team environment. Edward Joy Electric is a locally owned electrical and lighting distributor serving Central New York. We take pride in providing quality products, excellent service, and a supportive team environment.

FIELD SALES AND MARKETING REPRESENTATIVE – Techtronic Industries, NA (TTI) About Us: TTI (Techtronic Industries) is a fast-paced, high energy, organization that rewards out-of-the-box thinking to foster innovation allowing us to be the best in our industry. We provide a multi-faceted training program and hands-on field experience that will stimulate, challenge, and reward you. TTI is a world-class leader in design, manufacturing and marketing of power tools and accessories, outdoor product equipment, and floor care products. Our consumers range from professional and industrial users in the home improvement, repair, and construction industries to homeowners & DIY enthusiasts. Our unrelenting strategic focus on powerful brands, innovative products, operational excellence, and exceptional people drives our culture. This focus and drive provides TTI with a powerful platform for sustainable leadership and strong growth. Our brands and products are recognized worldwide for their deep heritage, superior quality, outstanding performance, and compelling innovation. Our products include professional power tools and accessories, outdoor power equipment, and floor care. Our brands include Milwaukee®, AEG®, Ryobi®, Hart ®, Oreck®, Hoover®, Dirt Devil® and Vax®. In this position, you will drive sales of our premier product lines within one of our largest retail partners. This position will allow you to enhance your selling, account management, and communication skills while launching your career in a fast-paced and extremely rewarding company. Duties and Responsibilities: • Exceed sales targets by delivering best-in-class Business to Consumer sales and customer service within The Home Depot, engaging directly with customers to understand their needs and recommend tailored TTI product solutions, all while demonstrating deep product knowledge and enthusiasm, • Plan and execute promotional events, product demos, and store walks to drive consumer engagement and increase product sell-through, • Support and implement strategic corporate brand marketing initiatives and promotional activities to increase brand awareness and drive sell-through, • Ensure brand presence and sales-readiness through strategic merchandising, optimal product placement, and completion of store objectives and resets—leveraging data analytics through Microsoft Power BI to drive decisions and maximize impact, • Develop a strong understanding of the retail marketplace, including customer profiles, product applications, competitive landscape, and channel dynamics, • Participate in TTI’s world class training program to be equipped with the knowledge to work independently within your assigned market, • Build and manage relationships with The Home Depot team members to enhance in-store execution and cultivate long-term business partnerships, • Effectively manage inventory levels through down-stocking, maintaining product accessibility, and ensure prompt reporting of all tasks and responsibilities, • Participate in merchandising resets to support TTI’s relentless innovation, ensuring the timely placement of cutting-edge products and solutions that drive growth, competitive advantage, and meet evolving market needs, all while adhering to TTI’s safety protocols Note: Employee's duties and responsibilities are not limited by the above. Other duties may be assigned as deemed necessary by the employee's supervisor. In addition to the basic requirements of the position, all employees are expected to meet the company's goals of continual improvement in the areas of knowledge, skills, processes, and quality. Job / Employment Requirements: • Must be at least 21 years of age or older, • Eligible to work in the United States without sponsorship or restrictions, • Ability to pass drug screening and Motor Vehicle Report screening, • Must have a valid United States driver’s license for at least one continuous full year in one state, • Must have a personal vehicle / reliable form of transportation, • Possess and maintain valid personal vehicle insurance listing you as the primary driver, • Position requires travel to/ from assigned store location(s) as well as occasional travel for meetings, projects, events, etc. Air travel will be required, • Employees will also be required to transport a small amount of company property (company devices, demo tools, tool kit, safety supplies), • Capable of reaching and/or lifting overhead in addition to ascending/descending ladders to move product, • Capable of lifting and transporting heavy tools (up to 50 lbs.) and requesting assistance as needed, • Capable of using hands to maneuver small objects, assemble tools and build displays, • Ability to work nights and weekends – weekends will be required at different points throughout the year, • Ability to work in a retail environment full time and stand for the duration of the shift, with the exception of meal and rest breaks, • Applicant should be self-motivated and a team player with strong organizational, planning and time management skills, • The applicant must be MS Office proficient, • Multilingual abilities preferred in specific markets depending on business needs, • Formal higher education preferred but not required – Equivalent experience will be considered, • Relocation may be required for future promotional opportunities Compensation and Benefits: • Salary Non-Exempt Position (Overtime Eligible), • The pay range for this position is $24.04 and $25.96/hour equating to a Target Annual Salary of $50,000 - $54,000, • Sales Contests and Incentives to Earn Additional Income (In Correlation with Business Needs / Focuses), • Vehicle Allowance of $600/month equating to a target of $7,200/year (pre-taxed) dispersed evenly across the 52 weeks in a year, • Company iPhone and iPad, • Medical, Vision, and Dental Benefits Available, • Insurance Coverages Available such as Short-Term Disability, Long Term Disability, Basic Life Insurance, Basic AD&D, and more, • 401K (Company Matches 50% up to 8% of Employee’s Salary), • Eligible for up to 10 Paid Holidays (Based on hire date), • Accrue up to 104 hours of PTO – 1st Year – Based on hire date, • Relocation assistance if moving for the position based on needs of the business, • Employee Referral Bonus Program and other incentive initiatives Job Postings are available for at least 48 hours from the posting date. TTI accepts ongoing applications as various positions are available nationwide. Locations available Nationwide. To learn more about TTI, visit our website at _.

Maintain on-site document control including project binders, shop drawings, construction drawings, and any other relevant construction documentation. The Site Manager (Design Build, EaaS, Construction) is responsible for all aspects of the assigned commercial/ industrial construction projects to run

These services include environmental, property and facility assessments, zoning and energy consulting, site investigation and remediation, industrial hygiene, land surveying, valuation, and construction risk management. A candidate for this position should have a background in architecture, engineer

Location: Remote, but must travel in person to project sites throughout the U.Travel Requirements: 60% to 80%.Compensation: Based on Experience.Area of Specialty Desired: Structural, Mechanical, and Piping (SMP).The successful Senior SMP Project Manager will drive GBI’s safe work culture and high-

Are you a Senior Project Manager in the Architecture, Engineering, and Construction field seeking purpose, challenge, and talented colleagues? With a diverse portfolio of residential, energy, commercial, light industrial and public programs, CESO has the opportunity for you to develop your career.We

Job Description U.S. Water Services Corporation is a well-established and diverse water and wastewater utility organization specializing in utility maintenance, operations, engineering and construction services. Headquartered in New Port Richey, Florida, U.S. Water is rapidly expanding with a staff of over 700 employees in 19 states. U.S. Water's Industrial Group specializes in providing wastewater facility operations & maintenance services for clients in the industrial and private sector. Job SummaryWe currently have an opportunity for an experienced Craftsman Technician. U.S. Water's Industrial Group operates treatment plants for its customers throughout the US. Each customer site is operated by an offsite project manager who works with a dedicated onsite Lead Operator and site operations team. This team is responsible for monitoring processes, adjusting controls, performing laboratory tests, maintaining equipment, replenishing chemicals, and maintaining good housekeeping. As part of the maintenance team, the Craftsman Technician completes a variety of maintenance tasks across our facilities. Primary Responsibilities • Performs scheduled routine preventative maintenance on plant equipment – pumps, blowers, motors. This includes tearing down and rebuilding equipment., • Performs non-routine system upgrades and process improvements. This includes removal of old equipment, installation of new equipment and machinery., • Experience with PVC, HDPE pipework preferred., • Demonstrates good interpersonal skills., • Applies a working knowledge of fundamental principles, terminology, and methodology in carrying out assignments., • Understands and applies standard policies and procedures within specific discipline., • Performs assignments with clear, specific objective which may require the limited exercise of judgment and decision-making skills., • Digs, spreads, and level dirt and gravel using picks, shovel and/or grading equipment., • Lifts and carries building materials, tool & supplies., • Cleans tools, equipment, materials, and work areas, • Performs a variety of tasks involving dexterous use of hands and tools, such as sawing lumber, dismantling forms, removing projections from concrete, mounting pipe hangers and cutting and attaching insulation material., • May operate a variety of the following types of equipment: jackhammer, generator, sand blaster, concrete mixer, grinders, compressors, saws, tampers, pumps etc. NOTE: This Job Description is not inclusive of all job duties. Job Requirements • High school diploma and 5+ years of relevant experience, • Valid driver's license, • Ability to travel 2-3 weeks at a time, • Experience working in an industrial setting, • Applicable Health & Safety training, • Ability to read plans / drawings / specifications and interpret data, • Knowledge of Microsoft Office, • Examples of Physical Requirements:, • Lifting: must be able to lift and carry up to 50lbs, • Standing: Position requires standing for extended periods, with occasional sitting", • Reaching/Climbing: Must be able to reach overhead and climb stairs and ladders, • Environmental Conditions: Must be able to work outdoors in various weather conditionsCompensation and Benefits Pay is commensurate with experience and reflective of market. U.S. Water offers a comprehensive benefits package including medical, dental, vision, life insurance, short/long-term disability, paid time off, holiday pay and 401(k) with company match. U.S. Water offers competitive wages and benefits and is committed to hiring and retaining a diverse workforce. We are an Equal Opportunity Employer, making decisions without regard to race, color, religion, sex, national origin, age, veteran status, disability, or any other protected class. Job Posted by ApplicantPro

Minimum of 5 years of experience in electrical project management, preferably in industrial construction. Completion of OSHA 30-Hour Construction Safety Training (or equivalent) required prior to hire or within 30 days of onboarding. Bachelor’s degree in electrical engineering, Construction Manage

Are you a Project Manager in the Architecture, Engineering, and Construction field seeking purpose, challenge, and talented colleagues? With a diverse portfolio of residential, energy, commercial, light industrial and public programs, CESO has the opportunity for you to develop your career.We develo

Geotechnical Engineering role / $100k-$150k / Established Consulting Firm! This Jobot Job is hosted by: Shawn Trainor Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $100,000 - $150,000 per year A bit about us: We are a diverse engineering and consulting firm providing geotechnical and foundation engineering to design professionals, private developers and public agencies; Engineering services to design professionals, contractors, private developers and public agencies for retail buildings, residential developments, commercial buildings, industrial structures, urban/community development and public projects. We are a geotechnical engineering firm working in NJ, NY, CY, PA Our core services: 1- Geotechnical investigation 2- Stormwater management investigation 3- Deep foundation design 4- Slope stability analysis 5- Rock fall protection design 6- Waterproofing design 7- Support of excavation designs 8- Underpinning designs 9- Site soils improvement programs design. 10- Etc. as it relates to geotechnical aspects of design 11- Construction inspection only where we are the EOR and only for the above items 12- Pre-construction conditions survey 13- Vibration and optical monitoring We are a small firm about 22 engineers and we are well known in our area Why join us? Provide responsive and quality engineering consultant services to our clients, with the objective of developing long-term client relationships. Job Details Key Responsibilities: • Conduct subsurface investigations, including fieldwork (drill borings, in-situ testing, sampling) and lab evaluation of soil and rock properties, • Perform geotechnical analyses and foundation design, addressing bearing capacity, settlement, slope stability, earth retention, underpinning, and deep foundations, • Provide value engineering support, offering cost-effective foundation alternatives and innovative design solutions, • Support construction monitoring, quality control and contractor liaison during site operations, • Prepare technical reports and design documentation, including boring logs, geotechnical reports, design recommendations, and contractor guidance, • Collaborate with multidisciplinary teams: geologists, civil engineers, architects, developers, and public agency representatives Qualifications: • Bachelor’s degree in Civil or Geotechnical Engineering (Master’s preferred); ability to pursue a Professional Engineer (PE) license, • Demonstrated technical expertise in geotechnical engineering, strong analytical and excellent written/verbal communication skills, • Willingness for field work and construction phase involvement, plus basic familiarity with geotechnical testing and analysis tools Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description Property Manager & J. G. Stickley, Inc. is a high-end furniture manufacturer and retailer with a long-standing reputation for craftsmanship, quality, and integrity. The company operates manufacturing facilities, retail showrooms, distribution channels, and corporate support functions that depend on safe, reliable, well-maintained facilities and infrastructure. We strive to attract and retain associates who value excellence, accountability, collaboration, safety, practical problem-solving, and continuous improvement. Primary Job Scope The Facilities Manager is responsible for the safe, reliable, cost-effective operation and upkeep of Stickley's facilities, grounds, building systems, utilities, and related infrastructure. This role manages day-to-day facility maintenance, preventive maintenance programs, vendor and contractor coordination, building repairs, safety and compliance support, space planning, capital improvement projects, and emergency response readiness. The Facilities Manager partners closely with Manufacturing, Operations, Finance, Human Resources, Retail, Distribution, Security, and outside service providers to ensure Stickley facilities support productive operations, protect associates and visitors, preserve company assets, and reflect the quality and heritage of the Stickley brand. Primary Major Areas of Responsibility • Facilities Operations and Maintenance: Oversee daily facility maintenance, repairs, inspections, work orders, and service requests across assigned Stickley locations, with priority on safe and uninterrupted manufacturing, distribution, office, showroom, and visitor operations., • Building Systems and Utilities: Manage the reliability and upkeep of building systems, including HVAC, electrical, plumbing, compressed air, lighting, fire protection, security systems, roofs, doors, docks, grounds, parking areas, and related infrastructure., • Preventive Maintenance and Asset Management: Develop, schedule, and monitor preventive maintenance programs for critical building systems and facility assets; maintain accurate records, equipment lists, service histories, warranties, and vendor documentation., • Safety, Compliance, and Risk Reduction: Support OSHA, fire/life safety, environmental, security, insurance, and company policy requirements by coordinating inspections, corrective actions, training support, emergency preparedness, and facility-related safety improvements., • Vendor, Contractor, and Service Management: Source, schedule, supervise, and evaluate outside contractors, service providers, property managers, and vendors to ensure quality work, safe practices, cost control, and timely completion of assigned work., • Capital Projects and Facility Improvements: Assist in developing scopes of work, budgets, timelines, bid packages, and implementation plans for facility upgrades, repairs, renovations, energy-efficiency initiatives, safety projects, and other capital improvements., • Budgeting, Purchasing, and Cost Control: Prepare cost estimates, obtain quotes, manage purchase requests, review invoices, monitor facility spending, identify cost-saving opportunities, and coordinate with Finance on accruals, budgets, and capital planning., • Space Planning and Facility Readiness: Support layout changes, equipment moves, office/showroom/warehouse needs, housekeeping standards, grounds appearance, visitor readiness, and facility conditions that reinforce Stickley's brand and operating needs., • Emergency Response and Business Continuity: Coordinate facility response to storms, utility interruptions, equipment failures, water events, security issues, and other emergency conditions; support disaster recovery planning and post-event corrective actions., • Cross-Functional Communication: Serve as a practical, responsive facilities partner to plant leadership, department managers, associates, and outside partners by communicating priorities, timelines, disruptions, risks, and completion status clearly and proactively., • Continuous Improvement: Identify recurring facility issues, improve maintenance processes, standardize service routines, use data and observation to prioritize work, and recommend practical improvements that reduce downtime, improve safety, and extend asset life., • Other Duties: Perform other related duties, special projects, and responsibilities as assigned by management. Key Qualifications • Minimum of 5 years of progressive experience in facilities management, plant maintenance, building operations, construction coordination, or a related field; manufacturing experience strongly preferred., • Working knowledge of building systems, preventive maintenance, contractor management, facility safety practices, and repair planning., • Experience supporting manufacturing, warehouse, showroom, office, or multi-site environments preferred., • Ability to read and interpret service reports, vendor proposals, maintenance records, drawings, equipment manuals, safety procedures, and basic project documentation., • Strong organizational, communication, follow-through, and problem-solving skills., • Ability to balance urgent repairs with planned maintenance, budget discipline, and long-term facility needs., • Comfortable working hands-on when needed while also managing outside vendors and internal priorities., • Proficiency with Microsoft Office and the ability to use work order, maintenance tracking, purchasing, or facilities management systems., • Valid driver's license and ability to travel between assigned company locations as needed. Preferred Qualifications • Technical degree, trade certification, facilities management certification, engineering background, or equivalent practical experience., • Experience with OSHA, fire/life safety, environmental, security, insurance inspection, emergency preparedness, or energy-efficiency programs., • Experience managing capital projects, building renovations, equipment moves, or major repair projects in an active operating environment., • Knowledge of woodworking, furniture manufacturing, finishing operations, dust collection, compressed air, material handling, or similar industrial systems is a plus. Leadership and Behavioral Expectations • Demonstrates ownership, urgency, and accountability for facility conditions and service response., • Communicates clearly and professionally with associates, managers, vendors, contractors, and leadership., • Maintains a strong safety mindset and takes practical action to reduce risk., • Uses sound judgment when prioritizing work, escalating issues, and committing company resources., • Protects confidential company information, property information, pricing, bids, and vendor relationships., • Represents Stickley with professionalism, integrity, respect, and pride in the company's heritage and brand reputation. Physical Demands and Work Environment While performing the duties of this job, the employee may be required to stand, walk, sit, climb stairs or ladders, access production and mechanical areas, work in manufacturing and warehouse environments, and occasionally lift or move materials consistent with business needs and safety practices. The role may require response outside normal business hours for facility emergencies, weather events, utility interruptions, or other urgent operational needs. Disclaimer The above describes the general nature and level of work assigned and is not intended to be an exhaustive list of all duties, responsibilities, or qualifications required for the position. Duties and responsibilities may change at the discretion of L. & J. G. Stickley, Inc. based on business needs. Benefits: We offer competitive compensation and a comprehensive benefits package that includes: • Flexible Paid Time Off & Paid Holidays, • Group Health, Dental, and Prescription Insurance, • Company-Paid Life Insurance, • 401(k) with Company Match, • Flexible Spending & Health Saving Account, • Generous employee discount, • Access to On-site Health Services, including dedicated nurse and licensed Nurse Practitioner, • Opportunities for Growth & Advancement The compensation range provided in this job posting is a general guideline. When extending an offer, Stickley considers factors including but not limited to the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Stickley is an equal opportunity employer committed to diversity and inclusion. Job Posted by ApplicantPro

Job Description IMMEDIATLY HIRING FORKLIFT OPERATOR ROLE PAY $21/50/HR START ASAP! Responsibilities • Operate forklifts and other lift trucks in a constant state of alertness, following all material handling and safety requirements to move, distribute, ship, and receive parts and equipment., • Work safely at elevated heights up to 50 feet while handling materials and performing warehouse tasks., • Maintain a strong safety focus by applying knowledge of sling, hoist, and crane operations when moving materials., • Perform stocking duties to address and resolve complex warehouse or factory capacity issues., • Keep accurate records of all material transactions and conduct audits to ensure overall inventory levels remain correct., • Investigate and reconcile inventory discrepancies and ensure all department records are complete and accurate., • Use a computer and handheld RF scanner to track inventory movements and update system records in real time., • Complete regular cycle counts to maintain and verify inventory accuracy., • Support production system–driven processes and activities by ensuring materials are available and correctly positioned for operations., • Follow written work instructions in English and adhere to all safety and operational procedures., • Handle materials using pallet jacks and other material handling tools as needed. Essential Skills • Ability to operate forklifts and other powered industrial vehicles safely, or willingness to learn and follow training., • Ability to work in a constant state of alertness and maintain a strong focus on safety., • Comfort working at elevated heights up to 50 feet., • Knowledge of or ability to learn sling, hoist, and crane operations to move materials safely., • Ability to use a computer and handheld RF scanner for inventory tracking., • Ability to read and understand English and follow written and verbal work instructions., • Ability to perform physical tasks including stooping, bending, twisting, turning, squatting, reaching, pushing, pulling, grabbing, and grasping., • Ability to safely lift up to 50 pounds on a regular basis., • Attention to detail and accuracy in recordkeeping and inventory control. Additional Skills & Qualifications • Previous experience with powered industrial vehicle (PIV) operation preferred but not required., • Prior manufacturing or warehouse experience preferred., • Experience using RF scanners, pallet jacks, and other material handling equipment is an asset., • Familiarity with inventory control processes such as cycle counting and transaction auditing is beneficial., • Comfort working in a fast-paced, production-oriented environment. Why Work Here? You join a stable, production-focused operation where safety, accuracy, and teamwork are highly valued. The role offers consistent daytime hours, allowing for predictable work-life balance during the week. You gain hands-on experience with modern material handling equipment and inventory systems, building skills that are highly transferable across logistics, manufacturing, and warehouse environments. You work alongside a supportive team that relies on clear processes and established production systems, giving you the structure and tools needed to succeed. Work Environment This position is based in a warehouse and production environment that uses modern material handling equipment, including forklifts, pallet jacks, RF scanners, and computer-based inventory systems. You will work on the 1st shift, Monday through Friday, from 6:00 a.m. to 2:30 p.m. The role involves working around powered industrial vehicles, stored materials at various heights, and active production areas. The environment requires frequent physical activity such as lifting up to 50 pounds, bending, twisting, and working at elevated heights up to 50 feet. You should expect to wear appropriate work attire and any required personal protective equipment suitable for a warehouse and material handling setting. Job Type & Location This is a Contract to Hire position based out of East Syracuse, NY. Pay and Benefits The pay range for this position is $21.50 - $21.50/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in East Syracuse,NY. Application Deadline This position is anticipated to close on Oct 8, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Clinton's Ditch is looking for a 2nd Shift Maintenance Mechanic Schedule: Monday-Friday 2:00 pm to 10:30 pm | OT as needed during the week and on Weekends. Summer is our peak season. Must have Industrial Maintenance Experience to be considered. Maintenance Mechanic - Essential Functions and Responsibilities: • Complies with established job safety practices, policies, and procedures as specified for the safe performance of Completes required training in a timely fashion, including compliance and on-the-job training., • Optimizes production processes., • Installs and maintains air compressors, plant air circulation systems, cooling and heating units, and plant lighting., • Performs preventative maintenance on assigned electrical systems, production equipment, and facility, as required., • Troubleshoots, repairs, installs, erects, moves, and/or dismantles all types of machinery and auxiliary production equipment., • Inspects job site and equipment to be dismantled, erected, or moved, analyzes blueprints and schematics, estimates the weight of loads to be handled, lifted, clearances, and recommends support equipment needed., • Fabricate sheet metal and structural units as needed: guarding, steps, stairs, conveyors, elevators, platforms, and sets in place., • Performs various manual or mechanical production functions by operating, adjusting, and repairing the production equipment to meet customer specifications., • Disassembles, overhauls, and rebuilds production equipment., • Inspects in-process materials and in-process and finished products., • Performs record-keeping duties as required under the direction of management., • Determines all supplies and tools needed for each assignment, • Capable of using all industrial shop and millwright equipment effectively and be able to fabricate precision parts., • Individuals must also be familiar with production equipments electronic components and have sound knowledge of basic line control equipment., • Be able to weld most common materials such that the end result is effective and presentable., • Should understand and be able to use basic test equipment such as volt/ohm meters, amp meters, voltage tester micrometers - among others., • Should be able to communicate effectively with both peers and supervisors and keep accurate records and logs., • Must take direction and work without direct supervision, be safety conscious, and follow plant policy and procedures., • Must be able to work through construction and machinery problems in a logical manner, • Must be able to diagnose problems and correct them within a reasonable amount of time., • Must maintain work areas, tools, panels, and equipment in a neat and orderly fashion., • Should be self-motivated, and professional and have a good attitude toward their supervisors and fellow employees Maintenance Mechanic - Job Requirements (Knowledge/Skills/Abilities): • Broad training in a related field is usually acquired through high school education or equivalent., • Job-related experience for 4 years minimum., • Required on-the-job and classroom training., • Working knowledge of the following areas: nomenclature of all assigned equipment, mechanical devices, transmission systems, interface units, AC/DC motors, wiring diagrams and schematics, computers and inspection, and digital devices, and the operating principles of all assigned equipment., • Ability to effectively train personnel., • Ability to use basic hand and power tools., • Ability to use electronic test equipment., • Must possess an interest in and an aptitude for mechanics, • Ability to perform basic mathematical calculations., • Ability to operate and functionally use a computer., • Ability to work in multiple departments., • Performs such individual assignments as management may direct., • Must follow company policies, procedures, practices, and standards of conduct., • Maintains an awareness of and complies with hazardous waste management and other environmental management requirements in the workplace., • Must maintain professional competence, ethical integrity, knowledge, and skills. Working Conditions: Works in both office and manufacturing environments. This position is exposed to occupational hazards, including but not limited to, high noise levels, physical obstacles, exposure to chemicals, etc. Requires working with or near energized 480 VAC circuits. Must wear appropriate safety glasses, hearing protection, clothing, and footwear in appropriate areas and follow safety practices. Physical Requirements: This position regularly requires a high degree of mental effort due to considerable interruptions and/or frequent changes of activity or workloads during a typical working day. The above statements are intended to describe the general nature and level of work performed by personnel assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified Payrate - $37.200 + Shift Dif

60% Travel Come build your career. It takes great people to achieve greatness. People with a sense of purpose and integrity. People with a relentless pursuit of excellence. People who care about making things better For Those Who Make The World. Sound like you? Join our top-notch team of approximately 43,500 diverse and high-performing professionals globally who are making their mark on some of the world's most beloved brands, including DEWALT, BLACK+DECKER, CRAFTSMAN, STANLEY, CUB CADET, and HUSTLER. As a Commercial Construction Sales Manager you will be part of the Commercial Field Sales team working as a remote/field-based employee in Syracuse, NY. You will be entrusted with total responsibility for championing SBD engagement at some of the largest construction projects in North America to drive sales. As the primary point of contact, you will identify and align high-impact opportunities through cross-functional collaboration, promoting and delivering value-added solutions throughout each phase of the construction lifecycle. You will build and sustain lasting partnerships with key stakeholders to ensure SBD's total solutions drive project success for key end users, contractors, and subcontractors. You'll get to: • Lead SBD's involvement in major North American construction projects, ensuring full engagement from pre-construction planning through project closeout., • Build and maintain direct relationships with end users, contractors, and subcontractors, understanding their needs and advocating SBD's solutions., • Promote and implement SBD's value-added products and services, customizing solutions to maximize project efficiency, safety, and profitability., • Oversee SBD's contributions at all construction phases, coordinating with internal teams to ensure timely product delivery and problem resolution., • Develop and execute comprehensive engagement plans for each assigned project, aligning SBD resources to project milestones and customer requirements., • Identify new opportunities for SBD to add value, streamline procedures, and enhance customer satisfaction throughout the project lifecycle., • Monitor project progress, manage budgets, and provide regular updates to leadership on SBD's impact and project metrics. You love to learn and grow and be acknowledged for your valuable contributions. You're not intimidated by innovation. Wouldn't it be great if you could do your job and do a world of good? In fact, you embrace it. You also have: • Bachelor's Degree preferred (Business Management or Engineering preferred), • 10+ years of in sales, marketing or related field., • OSHA10 & OSHA30 certifications preferred., • Proven Construction project management experience preferred., • Must have the ability to build relationships and work effectively with all levels of an organization to drive strategy, influence owners and create procedures and protocols., • Skilled at building and aligning a team to the overall strategic plan of the group and holding yourself accountable for the failures while giving credit to your team for the successes., • Ability to collaborate with the appropriate internal team members to resolve problems that arise with the end users in your region, • Ideal candidate is experienced in planning and executing meetings and events of varying sizes and scope., • Exhibit a thorough knowledge of managing and executing a budget for your region to stay within the developed forecast and allocation., • Travel 60% of the time, • Proficient computer skills including MS Office Suite, SAP and use of a smartphone You'll receive a competitive salary and a great benefits plan, including: • Medical, dental, life, vision, disability, 401(k), Employee Stock Purchase Plan, paid time off, and tuition reimbursement in addition to programs & benefits in support of your well-being., • Discounts on Stanley Black & Decker tools and other partner programs. We want our company to be a place you'll want to be and stay. Being part of our team means you'll get to: • Grow: Be part of our global company with 20+ brands to grow and develop your skills along multiple career paths., • Learn: Have access to a wealth of learning resources, including our digital learning portal., • Belong: Experience an awesome place to work, where we have mutual respect and a great appreciation for a wide range of perspectives and experiences., • Give Back: Help us continue to make positive changes locally and globally through volunteerism, giving back, and sustainable business practices. What's more, you'll get that pride that comes from empowering makers, doers, protectors, and everyday heroes all over the world. We're more than the #1 tools company. More than a driving force in outdoor power equipment. More than a global leader in industrial. We're visionaries and innovators. As successful as we've been in the past, we have so much further to go. That's where you come in. Join us! This role is not eligible for visa sponsorship #LI-REMOTE #LI-ZN1 The Total Target Cash Compensation range for this position is $105,000.00 - $169,100.00 • This is the lowest to highest total target cash compensation range we would pay for this role at the time of this posting. Total target cash compensation offered may vary depending on multiple factors including job level, geographic location, job-related knowledge, skills, qualifications, experience and in compliance with local wage requirements. This role is eligible for a sales incentive plan or commission. Therefore, the total target cash compensation range is inclusive of base salary and target variable cash compensation. Please note that salary is only one component of total rewards at Stanley Black & Decker., • The target cash compensation range listed in this job posting reflects the range for the primary location specified. The cash compensation range may vary for other locations., • The successful candidate may be eligible for annual merit increases., • Medical, dental, life, vision, disability, 401(k),Employee Stock Purchase Plan, paid time off, and tuition reimbursement in addition to programs & benefits in support of your well-being., • Discounts on Stanley Black & Decker tools and other partner programs. We Don't Just Build The World, We Build Innovative Technology Too. Joining the Stanley Black & Decker team means working in an innovative, tech-driven and highly collaborative team environment supported by over 43,500 professionals in 60 countries across the globe. Here, you'll get the unique chance to impact some of the world's most iconic brands including STANLEY TOOLS, DEWALT, CRAFTSMAN, MAC TOOLS and Black + Decker. Your ideas and solutions have the potential to reach millions of customers as we work together to write the next chapter in our history. Come build with us and take your career to new heights. Who We Are We're the World's largest tool company. We're industry visionaries. We're solving problems and advancing the manufacturing trade through innovative technology and our Industry 4.0 Initiative. We are committed to ensuring our state-of-the-art "smart factory" products and services provide greater quality to our customers & greater environmental and social value to our planet. We are unique in that we have a rich and storied history dating back to 1843, but that hasn't stopped us from evolving into a vibrant, diverse, global growth company. What You'll Also Get Career Opportunity: Career paths aren't linear here. Being part of our global company with 60+ brands gives you the chance to grow and develop your skills along multiple career paths. Benefits & Perks You'll get a competitive salary and a comprehensive benefits plan that includes medical, dental, life, vision, wellness program, disability, retirement benefits, Employee Stock Purchase Plan, Paid Time Off, including paid vacation, holidays & personal days, and tuition reimbursement. And, of course, discounts on Stanley Black & Decker tools and products and well as discount programs for many other vendors and partners. Learning & Development: Our lifelong learning philosophy means you'll have access to a wealth of state-of-the-art learning resources, including our Lean Academy and online university (where you can get certificates and specializations from renowned colleges and universities). Diverse &

Ramboll is a global architecture, engineering, and consultancy company. As a foundation-owned people company, founded in Denmark, we believe that the purpose of sustainable change is to create a thriving world for both nature and people. So, that's where we start and how we work. Our history is rooted in a clear vision of how a responsible company should act and being open and curious is a cornerstone of our culture. Ramboll in the Americas has thousands of experts working across more than 70 offices. Ramboll experts deliver innovative solutions across Environment & Health, Water, Energy, and Planning & Urban Design. Remote option is available for this position. Applicants must be currently authorized to work in the United States on a full-time basis. No sponsorship is available for this position. Are you eager to develop your excellence in an inclusive, collaborative, and empowering community? Are you excited about joining a company that strives to make a difference for its employees, clients, and society? Are you motivated by creating sustainable change that benefits society and nature? If this sounds like you, or you're curious to learn more, then this role could be the perfect opportunity. Join our Workplace Management team and work with us to close the gap to a sustainable future. Your new role This role provides senior HSEQ leadership across Ramboll's EPC/EPCM project portfolio in Ramboll Americas, supporting the safe delivery of complex engineering, procurement, construction management, commissioning, and turnover activities. The role is responsible for establishing consistent HSEQ governance, aligning contractors and project teams, supporting high-risk work planning, and enabling effective execution across multiple concurrent projects. The successful candidate will bring significant hands-on experience from large-scale EPC/EPCM construction environments and will be able to operate confidently at both strategic and field execution levels. The ideal candidate will be a credible HSEQ leader with significant field experience on large-scale construction or EPC/EPCM projects, strong contractor management capability, and the confidence to influence senior project, client, and contractor stakeholders. They will be comfortable working across multiple projects, balancing strategic governance with practical field-based support, and helping project teams create consistent, risk-based HSEQ execution. Your key responsibilities will be: • Lead the development of a portfolio-wide HSEQ approach that enables consistent standards, scalable processes, and project-specific execution across all EPC/EPCM projects., • Serve as primary HSEQ advisor to Project Directors and EPC/EPCM leadership teams., • Drive adoption of Ramboll's HSEQ program and translate its expectations into practical project-level behaviors, controls, and leadership routines., • Provide strategic HSEQ guidance during proposals and contract negotiations to align client expectations and establish the conditions needed for effective safety management., • Provide HSEQ leadership within an EPC/EPCM delivery model, ensuring clear boundaries, responsibilities, and interfaces between Ramboll, clients, construction contractors, subcontractors, and suppliers., • Define HSEQ organization structures that are scalable with the ability to support multi-project EPC/EPCM delivery on a nationwide basis., • Clarify roles, responsibilities, interfaces, and governance models required for integrated EPC/EPCM/safety programs., • Establish standardized HSEQ execution plans across engineering, procurement, construction, commissioning, and turnover., • Establish construction readiness expectations, including contractor mobilisation, competency assurance, risk review, and field execution controls., • Align HSEQ expectations, execution standards, and performance requirements across contractors, subcontractors, vendors, and third-party stakeholders., • Lead contractor onboarding, alignment sessions, audits, and recurring performance reviews., • Ensure HSEQ requirements are embedded into contracting strategies, procurement packages, bid documents, mobilisation plans, and contractor management processes., • Support project teams in translating Ramboll and client HSEQ requirements into practical field execution requirements for contractors and subcontractors., • Provide governance and assurance over EPC/EPCM risk management processes, including hazard identification, construction risk assessments, high-risk work reviews, and site controls., • Support project HSEQ resources and project leadership in establishing consistent risk management expectations, while ensuring accountability remains clear within the project delivery structure., • Review and challenge the effectiveness of controls for high-risk activities, including lifting, electrical work, confined space entry, work at height, ground disturbance, energisation, commissioning, and simultaneous operations., • Provide oversight, escalation support, and subject matter input for high-potential or higher-severity incidents, ensuring investigations are completed and lessons learned are embedded across relevant projects., • Conduct site visits, leadership engagements, and assurance reviews to verify that project HSEQ controls are effective, understood, and consistently applied by the relevant project teams and contractors., • Demonstrate visible HSEQ leadership that builds trust, accountability, and proactive safety behaviors across project teams and contractors., • Coach project and contractor leadership teams to strengthen leading indicators, reinforce expectations, and promote consistent safety leadership., • Promote open communication, psychological safety, learning, and continuous improvement across the EPC/EPCM project portfolio., • Provide oversight of compliance with applicable health, safety, and environmental regulations, client requirements, and Ramboll HSEQ standards across EPC/EPCM projects., • Support project teams in translating regulatory and contractual HSEQ requirements into practical controls and assurance activities., • Represent Ramboll in client audits, regulatory inspections, and EPC/EPCM governance meetings, ensuring actions are effectively tracked, communicated, and closed., • Establish consistent HSEQ performance reporting across EPC/EPCM projects, using leading and lagging indicators to identify trends, drive accountability, and improve performance., • Translate performance data into clear insights, actions, and recommendations for project leadership, clients, contractors, and internal stakeholders. About you • Bachelor's degree in Occupational Health & Safety, Engineering, or related field., • 10+ years of progressive on-site HSEQ leadership experience with substantial large-scale EPC/EPCM project exposure., • Strong background supporting multi-contractor, high-risk industrial construction environments., • Demonstrated ability to influence without direct authority., • Proven experience supporting construction management delivery models where HSEQ performance is delivered through contractor execution and strong client/contractor interface management., • Working knowledge of construction-phase HSEQ controls, contractor management, incident investigation, assurance, and regulatory compliance., • Ability to travel regularly to project locations and engage effectively with field teams, project leadership, clients, and contractors., • Strong communication, facilitation, and stakeholder management skills. Preferred: • Professional certifications (CSP, CMIOSH, NEBOSH, CRSP, or equivalent)., • Experience with energy transition, power, renewables, industrial de-carbonisation, chemicals, manufacturing, mining, or major infrastructure projects., • Experience supporting owner's EPC/EPCM models across multiple concurrent projects., • International or remote project experience. What we can offer you • Investment in your development, • Being valued for the unique person you are, • Never being short of inspiration from colleagues, clients, and projects, • The long-term thinking of a foundation-owned company Salary Transparency Statement At Ramboll, we are committed to fair and transparent compensation practices that support our people and our purpose of creating sustainable societies. The anticipated base salary range for this position is $136,497 - $197,515 per year. This range reflects the compensation we reasonably expect to offer at the time of posting. Actual compensation will vary based on factors such as location, skills, experience, education, and internal equity. Because we operate across multiple U.S. markets, pay may differ depending on the cost of labor in specific locations. In addition to base salary, this position may be eligible for bonus, overtime or other forms of compensation and we offer a comprehensive benefits package that supports well-being, professional development, and work-life balance. Our recruiters are happy to share more about the specific salary range and total rewards package applicable to your location during the hiring process. Ready to join us? Please submit your application with your up-to-date CV. We invite diversity in all its forms and encourage applicants from all groups to apply. Thank you for taking the

At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what's possible. Parsons is looking for a talented RFI / Submittal Coordinator to join our team! In this role you will support coordinated and timely responses to contractor RFIs and submittals by maintaining logs, tracking deadlines, coordinating reviewers, and reporting status metrics. • Maintain RFI and submittal logs for selected projects., • Track response deadlines and coordinate review assignments among clients technical and commercial teams., • Monitor response status and escalate overdue items to the applicable Project Director of Construction., • Report RFI and submittal metrics as part of the clients project administration reporting., • Support the clients efforts to provide timely RFI responses and submittal reviews to avoid delays attributable to Owner response times., • Assist in administration of existing RFI and submittal tracking systems and recommend process improvements where appropriate., • Coordinate with project administration stakeholders to support organized and retrievable records., • Maintain a support role within the clients approval framework for RFI responses and submittal reviews., • Associate's or Bachelor's degree in construction management, engineering, business, or related field, or equivalent., • Experience supporting RFIs, submittals, or technical document workflows on construction projects., • Strong tracking, deadline management, and cross-functional coordination skills., • Strong written communication and organizational skills., • Experience using project tracking logs or PMIS tools., • Experience supporting owner-side project administration teams., • Familiarity with EPC or CMA document review workflows., • Experience on large industrial or complex building programs. Salary Range: $74,800.00 - $130,900.00 We value our employees and want our employees to take care of their overall wellbeing, which is why we offer best-in-class benefits such as medical, dental, vision, paid time off, Employee Stock Ownership Plan (ESOP), 401(k), life insurance, flexible work schedules, and holidays to fit your busy lifestyle! Parsons is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status or any other protected status.

Tower TechnicianTSC is an industry leading Specialty Contractor providing Construction Crews and Management to install wireless equipment on communications structures. Previous knowledge of networking principals, Ethernet standards, power systems, cable testing, and industrial construction is a plus