Industrial maintenance technician jobs in San Jose, CaliforniaCreate job alerts

Job Description Title: Gas & Chemical TechnicianNOTE: DO NOT SUBMIT CANDIDATES THAT HAVE ALREADY BEEN SUBMITTED ON OTHER SANTA CLARA, CA MEGASYS TECHNICIAN REQUISITIONS!!!!!Candidates need to watch this video prior to having an interview: temporary shift M – F 7:00 am – 3:30 pm for the first 2 – 3 months for new hire training. Once completed, the worker will be assigned to Shift: TBDOur team of 55 supports the facilities 24x7. The individual will be assigned to A, B, C D, compressed shift (7:00am - 7:30pm or 7:00pm – 7:30am).Job Description:EMD Electronics has openings for Gas and Chemical Project Technicians for its team in Santa Clara, CA. The individual will be responsible for supporting and leading the technical demands of the site's gas or chemical equipment. They will ensure compliance with operation and maintenance procedures, emergency preparedness, and drive flawless execution.A subject matter expert for gas, chemical, and slurry equipment, providing technical support and problem resolution. The individuals will be a part of the onsite Project and equipment team and will support the gas and chemical operations in 11 buildings throughout Santa Clara and Sunnyvale. The Technician will support and lead the technical challenges for over 2000 pieces of distribution equipment of various types and vendors.You will ensure compliance when writing, editing, and executing operating and maintenance procedures and drive a ZERO safety or quality incident culture. A subject matter expert for gas, chemical, or slurry equipment, providing technical support and problem resolution.The individual will also be involved in project and sustaining operations, Basic Safety Processes, quality management, preventative maintenance, and training. They will support installing, decommissioning, troubleshooting, and repairing all EMD Electronics Gas Systems, Applied Energy Systems gas systems, Fuji liquid delivery systems, Air Liquide Gas, and Chemical systems. The individual must be capable of performing cylinder and drum changes on all chemical and gas systems and perform complex troubleshooting and problem resolution for all equipment.Must demonstrate quality and comprehensive knowledge of gas or chemical applications in wafer fabrication and emergency response.Inexperienced and experienced will undergo comprehensive OJT and technical training and qualification programs. 5 levels of technicians offer a fast-paced promotion track. This is a career opportunity in a growing industry.Site Address:974 East Arques Avenue Sunnyvale, CAHourly Pay Rates based on Experience:Entry to Mid-Level $28 - 32High-Level $32 or higher, but only based on a high level of experience.*The Hiring Manager determines the pay rate, and the Hiring Manager will determine the final offer.NOTE: Interviews are held virtually Monday-Thursday only.THIS IS NOT A MATERIAL HANDLER POSITION[Onboarding and Clearance to Start Information is at the bottom of this Req]Your Role:We are seeking contract professionals for Megasys Technician roles supporting EMD Electronics! This is a challenging, hands-on, rewarding job opportunity for people who want to join a growing business in a career role.This contract engagement offers on-the-job training for quickly learning critical technical skills to excel in this role and be considered for conversion to permanent, as determined by supervisors and business needs.Technicians work on systems and maintain the supply of chemicals and gases to a semiconductor manufacturing environment that makes the chips used in electronic devices such as smartphones, LEDs, and flat-screen TV'sTechnicians will be responsible for the safe operation of assigned chemical and/or gas distribution systems, with duties including:• Handling and change-out of gas, chemical, and slurry containers• Gas and chemical equipment troubleshooting and preventative/repair maintenance• Computer operations to support job functions and customer needs• Support of quality systemsPhysical Attributes:• Occasionally climbing ladders (utilizing fall protection)• In some cases, Technicians must wear a Site Supplied Contained Breathing Air Respirator (this type of respirator provides air from a cylinder through a mask connected to the cylinder) while working with chemicals (approx. 10-15 minutes• Basic lifting (up to 40lbs)• Bending of the knees and overhead reaching• PPE made available to workers includes safety glasses, hard hats, earplugs, chemical aprons, gloves, etc. Workers will be provided with vouchers to purchase safety boots, which they are required to wearWho You Are:Minimum Qualifications:• High School Diploma or GED equivalentPreferred Qualifications:• Prior experience in maintenance or as an equipment technician or in a mechanical or electronic environment is a plus• Previous experience with chemical and gas distribution equipment is helpful• Military training is welcomed• Strong technical aptitude• Excellent communication skills• Proficient with MS Office SuiteMEGASYS® is the branded name for EMD Electronics services where EMD Electronics Technicians and Engineers provide on-site gas and chemical/slurry management.If you have previous experience in Manufacturing, Gas and Oil, Chemical Technician, Industrial Mechanics, Production Technician, Bio-Tech, Automotive and Mechanics, Waste and Waste Water Treatment, Power Plant, or Refinery this could be a great fit for you!Military Veterans: MEGASYS® is a military-friendly employer that values the skills obtained through military teamwork. Our culture and company value the leadership and focus on safety that is obtained from your service. Veterans from any branch or MOS with hands-on mechanical skill sets are encouraged to apply.ONBOARDING & CLEARANCE TO START:• Completed Onboarding form and Signed NDA form• Site-specific requirements• Physical which includes a Qualitative Fit Test – once complete send a completed Onboarding Clearance form to Shellie Whtimore, MSP Specialist, for clearance to start.• Respirator Fit Test will be administered during orientation• All workers start on Mondays Education: High School Company DescriptionCompunnel Inc., established in 1994; is a leading provider of Staffing, IT/Software, e-Learning/Training, Business Intelligence, and Cloud Solutions. A leader in contingent and permanent workforce solutions, we also provide temp-to-hire staffing, project-based/SOW staffing, and payroll services to our esteemed clientele which includes Fortune 500 companies of diverse industry segments. Ranked as one of the largest staffing firms in the US which is our primary service market; we also have a significant presence in Europe and Asia. As a national service provider in the US, we are serving our customers all major states and regions; thereby generating numerous job opportunities for prospective employees in their preferred locations of choice. We have witnessed multi-fold YOY growth, and continuously adding a large pool of talented resources to our employee base every year. Our extensive experience in hiring professionals of multiple in-demand skill sets (IT, Engineering, Healthcare, Admin-Clerical, Finance, Professional, Light Industrial, etc.) further makes Compunnel a wider and preferred platform for people to pursue their careers in the US. We welcome people from all walks of life and cultures, and we support workforce diversity by providing equal employment opportunities to people without any discrimination based on race, color, gender, religion, national/ethnic region, disability, or any other basis.Compunnel Inc., established in 1994; is a leading provider of Staffing, IT/Software, e-Learning/Training, Business Intelligence, and Cloud Solutions. A leader in contingent and permanent workforce solutions, we also provide temp-to-hire staffing, project-based/SOW staffing, and payroll services to our esteemed clientele which includes Fortune 500 companies of diverse industry segments. Ranked as one of the largest staffing firms in the US which is our primary service market; we also have a significant presence in Europe and Asia. As a national service provider in the US, we are serving our customers all major states and regions; thereby generating numerous job opportunities for prospective employees in their preferred locations of choice.\r\n\r\nWe have witnessed multi-fold YOY growth, and continuously adding a large pool of talented resources to our employee base every year. Our extensive experience in hiring professionals of multiple in-demand skill sets (IT, Engineering, Healthcare, Admin-Clerical, Finance, Professional, Light Industrial, etc.) further makes Compunnel a wider and preferred platform for people to pursue their careers in the US. We welcome people from all walks of life and cultures, and we support workforce diversity by providing equal employment opportunities to people without any discrimination based on race, color, gender, religion, national/ethnic region, disability, or any other basis.

Job Description Title: Gas & Chemical Technician Client: EMD Location: Sunnyvale, CA Contract Duration: 12+ months Schedule: M – F 7:00 am – 3:30 pm for the first 2 – 3 months Payrate: $30-32/hr on W2 The temporary shift M – F 7:00 am – 3:30 pm for the first 2 – 3 months for new hire training. Once completed, the worker will be assigned to Shift: TBD Our team of 55 supports the facilities 24x7. The individual will be assigned to A, B, C D, compressed shift (7:00am - 7:30pm or 7:00pm – 7:30am). Job Description: The individual will be responsible for supporting and leading the technical demands of the site gas or chemical equipment. They will ensure compliance with operation and maintenance procedures, emergency preparedness, and drive flawless execution. A subject matter expert for gas, chemical, and slurry equipment, providing technical support and problem resolution. The individuals will be a part of the onsite Project and equipment team and will support the gas and chemical operations in 11 buildings throughout Santa Clara and Sunnyvale. The Technician will support and lead the technical challenges for over 2000 pieces of distribution equipment of various types and vendors. You will ensure compliance when writing, editing, and executing operating and maintenance procedures and drive a ZERO safety or quality incident culture. A subject matter expert for gas, chemical, or slurry equipment, providing technical support and problem resolution. The individual will also be involved in project and sustaining operations, Basic Safety Processes, quality management, preventative maintenance, and training. They will support installing, decommissioning, troubleshooting, and repairing, Applied Energy Systems gas systems, Fuji liquid delivery systems, Air Liquide Gas, and Chemical systems. The individual must be capable of performing cylinder and drum changes on all chemical and gas systems and perform complex troubleshooting and problem resolution for all equipment. Must demonstrate quality and comprehensive knowledge of gas or chemical applications in wafer fabrication and emergency response. Inexperienced and experienced will undergo comprehensive OJT and technical training and qualification programs. 5 levels of technicians offer a fast-paced promotion track. This is a career opportunity in a growing industry. Your Role: We are seeking contract professionals for Megasys Technician roles supporting EMD Electronics! This is a challenging, hands-on, rewarding job opportunity for people who want to join a growing business in a career role. This contract engagement offers on-the-job training for quickly learning critical technical skills to excel in this role and be considered for conversion to permanent, as determined by supervisors and business needs. Technicians work on systems and maintain the supply of chemicals and gases to a semiconductor manufacturing environment that makes the chips used in electronic devices such as smartphones, LEDs, and flat-screen TV's Technicians will be responsible for the safe operation of assigned chemical and/or gas distribution systems, with duties including: • Handling and change-out of gas, chemical, and slurry containers, • Gas and chemical equipment troubleshooting and preventative/repair maintenance, • Computer operations to support job functions and customer needs, • Support of quality systems Physical Attributes: • Occasionally climbing ladders (utilizing fall protection), • In some cases, Technicians must wear a Site Supplied Contained Breathing Air Respirator (this type of respirator provides air from a cylinder through a mask connected to the cylinder) while working with chemicals (approx. 10-15 minutes, • Basic lifting (up to 40lbs), • Bending of the knees and overhead reaching, • PPE made available to workers includes safety glasses, hard hats, earplugs, chemical aprons, gloves, etc. Workers will be provided with vouchers to purchase safety boots, which they are required to wear Minimum Qualifications: • Prior experience in maintenance or as an equipment technician or in a mechanical or electronic environment is a plus, • Previous experience with chemical and gas distribution equipment is helpful, • Military training is welcomed, • Strong technical aptitude, • Excellent communication skills, • Proficient with MS Office Suite If you have previous experience in Manufacturing, Gas and Oil, Chemical Technician, Industrial Mechanics, Production Technician, Bio-Tech, Automotive and Mechanics, Waste and Waste Water Treatment, Power Plant, or Refinery this could be a great fit for you! Military Veterans: MEGASYS? is a military-friendly employer that values the skills obtained through military teamwork. Our culture and company value the leadership and focus on safety that is obtained from your service. Veterans from any branch or MOS with hands-on mechanical skill sets are encouraged to apply. ONBOARDING & CLEARANCE TO START: • Completed Onboarding form and Signed NDA form, • Site-specific requirements, • Physical which includes a Qualitative Fit Test – once complete send a completed Onboarding Clearance form to Shellie Whtimore, MSP Specialist, for clearance to start., • Respirator Fit Test will be administered during orientation, • All workers start on Mondays

Job Description Job Title: Gas & Chemical Technician Shift: The temporary shift M – F 7:00 am – 3:30 pm for the first 2 – 3 months for new hire training. Once completed, the worker will be assigned to Shift: TBD The individual will be assigned to A, B, C D, compressed shift (7:00am - 7:30pm or 7:00pm – 7:30am). Job Description: The individual will be responsible for supporting and leading the technical demands of the site's gas or chemical equipment. They will ensure compliance with operation and maintenance procedures, emergency preparedness, and drive flawless execution. A subject matter expert for gas, chemical, and slurry equipment, providing technical support and problem resolution. The individuals will be a part of the onsite Project and equipment team and will support the gas and chemical operations in 11 buildings throughout Santa Clara and Sunnyvale. The Technician will support and lead the technical challenges for over 2000 pieces of distribution equipment of various types and vendors. You will ensure compliance when writing, editing, and executing operating and maintenance procedures and drive a ZERO safety or quality incident culture. A subject matter expert for gas, chemical, or slurry equipment, providing technical support and problem resolution. The individual will also be involved in project and sustaining operations, Basic Safety Processes, quality management, preventative maintenance, and training. They will support installing, decommissioning, troubleshooting, and repairing all Electronics Gas Systems, Applied Energy Systems gas systems, Fuji liquid delivery systems, Air Liquide Gas, and Chemical systems. The individual must be capable of performing cylinder and drum changes on all chemical and gas systems and perform complex troubleshooting and problem resolution for all equipment. Must demonstrate quality and comprehensive knowledge of gas or chemical applications in wafer fabrication and emergency response. If you have previous experience in Manufacturing, Gas and Oil, Chemical Technician, Industrial Mechanics, Production Technician, Bio-Tech, Automotive and Mechanics, Waste and Waste Water Treatment, Power Plant, or Refinery this could be a great fit for you! Inexperienced and experienced will undergo comprehensive OJT and technical training and qualification programs. 5 levels of technicians offer a fast-paced promotion track. This is a career opportunity in a growing industry. Your Role: • We are seeking contract professionals for Megasys Technician roles! This is a challenging, hands-on, rewarding job opportunity for people who want to join a growing business in a career role., • This contract engagement offers on-the-job training for quickly learning critical technical skills to excel in this role and be considered for conversion to permanent, as determined by supervisors and business needs., • Technicians work on systems and maintain the supply of chemicals and gases to a semiconductor manufacturing environment that makes the chips used in electronic devices such as smartphones, LEDs, and flat-screen TV's Technicians will be responsible for the safe operation of assigned chemical and/or gas distribution systems, with duties including: • Handling and change-out of gas, chemical, and slurry containers, • Gas and chemical equipment troubleshooting and preventative/repair maintenance, • Computer operations to support job functions and customer needs, • Support of quality systems Physical Attributes: • Occasionally climbing ladders (utilizing fall protection), • In some cases, Technicians must wear a Site Supplied Contained Breathing Air Respirator (this type of respirator provides air from a cylinder through a mask connected to the cylinder) while working with chemicals (approx. 10-15 minutes, • Basic lifting (up to 40lbs), • Bending of the knees and overhead reaching, • PPE made available to workers includes safety glasses, hard hats, earplugs, chemical aprons, gloves, etc. Workers will be provided with vouchers to purchase safety boots, which they are required to wear Who You Are: Minimum Qualifications: • High School Diploma or GED equivalent Preferred Qualifications: • Prior experience in maintenance or as an equipment technician or in a mechanical or electronic environment is a plus, • Previous experience with chemical and gas distribution equipment is helpful, • Military training is welcomed, • Strong technical aptitude, • Excellent communication skills, • Proficient with MS Office Suite

Maintenance Technician II US-CA-Sunnyvale Job ID: 2025-5769 Type: Regular Full-Time of Openings: 1 Category: Maintenance The Martin Overview We are growing! Sares Regis Group of Newport Beach, California, is a privately held real estate development, investment and management firm that focuses on commercial properties and multifamily communities in the western U.S. Since its founding in 1993, SRG has developed and acquired more than $7 billion in commercial and residential assets. The company manages a combined portfolio of approximately 25 million square feet of office and industrial space and 30,000 apartment units. OPPORTUNITY: MAINTENANCE TECHNICIAN II - SUNNYVALE, CA Sares Regis Group is seeking an experienced maintenance professional for our beautiful 479-unit community, The Martin! This is an excellent opportunity for someone looking to grow their career in the property management industry! Duties include but aren't limited to: • Works in turnover and renovation units, as well as responds to maintenance service requests., • Works on external, as well as internal repairs which may include, but is not limited to, drywall repairs, painting, fence and gate repairs, plumbing installation or repairs, appliance repairs, boilers and HVAC systems, and common area clean-up., • Participates in emergency and after hours coverage based on the established schedule or as required., • Sets up and operates machine tools such as lathe, grinder, drill, and milling machine to repair or fabricate machine parts, jigs and fixtures, and tools., • Fabricates and repairs cabinets, counters, benches, partitions, and other wooden structures., • Maintains or assists in maintaining inventory and prepares related paperwork., • Keeps storage facilities and equipment in an orderly, working condition. QUALIFICATIONS • Must have 2-5 years of experience in all trades (electrical, plumbing, drywall, paint, appliances, etc.), • Demonstrated knowledge and skill in performing quality work; able to use required tools and machinery; professional interaction with co-workers, residents and vendors; knowledge and continued education of OSHA requirements; knowledge of MSDS requirements appropriate to the scope of work., • Ability to read and interpret service orders and documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to effectively present information and respond to questions from employees, managers, clients, customers, and the general public., • High school diploma or GED, technical school, or three to six months related experience and/or training; or equivalent combination of education and experience., • Excellent customer service skills a must!, • Lease-up experience preferred., • Ability to work weekends required. Salary range is $30.00-$32.00/hour. We offer a competitive compensation package that includes a 401(K) match, rental incentive and renewal compensation, bonuses, and rental discounts depending on location. Regular full-time employees who work between 30-40 hours a week are eligible for medical, dental, vision, other voluntary benefits and vacation accrual. Sick time accrual is provided in accordance with law. PLEASE APPLY ONLINE AT: SARES REGIS CAREERS WEBSITE EQUAL OPPORTUNITY EMPLOYER All positions contingent on completion of successful background screen and drug test. PM21 Compensation details: 30-33 Hourly Wage PIfc2d6196a1f0-37820-38772717

Location US-CA-San Jose Company Canon U.S.A., Inc. Requisition ID 33162 Category Field Service Position Type Full-Time Workstyle Full-Time On Site Are you a hands-on technician who enjoys troubleshooting, fixing, and maintaining commercial printing and imaging equipment? Do you thrive in the field, solving problems, and supporting customers with high service standards? Canon USA is seeking a Field Service Technician III to join our service team. You'll be responsible for on-site maintenance, diagnostics, and repair of Canon-supported copiers, printers, and multi-function imaging devices (MFPs) at client locations - often in a fast-paced, 24/7 customer-driven setting where responsiveness and reliability are key. We're searching for a true go-getter to: • Perform routine maintenance and break/fix repair of digital imaging equipment (copiers, printers, MFPs)., • Respond quickly and professionally to customer service calls in the field., • Maintain accurate service logs and reports, including Field Service Reports and Expense Reports., • Report product failure trends and serviceability issues to your manager with proper documentation., • Ensure all assigned equipment meets operational performance standards., • Represent Canon in a customer-facing role with professionalism and excellent communication skills., • Adhere to customer-specific site protocols, which may include COVID-19 or other safety measures., • Deliver exceptional service and support in a 24/7 customer-driven environment where uptime matters. Please note: this is a customer-facing role, and requires compliance with customer policies and protocols, which may include COVID-19 vaccination and other measures relating to COVID-19. We're looking for a dedicated individual with: • Typically requires general and/or vocational training plus 2 to 4 years of related experience., • An Associate's degree in electronics or electrical engineering capacity from an accredited college or technical school or equivalent experience., • Direct experience working as a field technician., • The capacity to meet or exceed the minimum performance standards for productive technical quality and customer satisfaction for assigned territory., • The ability to travel (valid driver's license and acceptable driving record necessary)., • Capable of excelling in a 24/7 environment, while performing shift work and on-call rotations., • Required to take all necessary steps to obtain security and/or other clearances required by customers to enter the customers' premises. Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer You'll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -"Dress for Your Day" attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you can't get anywhere else *Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers' site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at . #CUSA Full-Time On Site - This position requires full-time presence at your assigned office(s)/worksite(s)/territory on your scheduled work days. #PM19 #LI-FL1 We can recommend jobs specifically for you! Click here to get started.

Vantage Data Centers powers, cools, protects and connects the technology of the world's well-known hyperscalers, cloud providers and large enterprises. Developing and operating across North America, EMEA and Asia Pacific, Vantage has evolved data center design in innovative ways to deliver dramatic gains in reliability, efficiency and sustainability in flexible environments that can scale as quickly as the market demands. Site Operations Department The Site Operations Department is responsible for the overall health of all mechanical and electrical systems, building maintenance, and performance of all data modules in our data centers. The team is staffed 24 x 7 onsite with Critical Facility Engineers (CFEs) on each shift. This team is the face of Vantage to our customers and the first line of defense regarding the uptime of our campus as well as the performance of our customer installations. Using a Critical Maintenance Management System (CMMS) to plan and track work needed, the Site Operations department performs all preventative and corrective maintenance. Our culture expects and rewards team performance that engages directly with the customers and the facility infrastructure. This is a team that does most of the actual work versus calling upon vendors. As a result, we provide superior service that is faster and more cost effective. Position Overview This position will be onsite in Santa Clara, CA. We are looking for a Critical Facilities Engineer who knows what best-in-class service looks like and can make that a reality. This role is an important member of our facilities team where we manage some of the most efficient and cost-effective data center facilities in the industry. The specific skillset needed by this team is that of a hands-on industrial HVAC technician or mechanic, or an individual with equivalent experience in critical cooling systems. The successful candidate for this role will work with a team of other electrical and mechanical-focused engineers performing maintenance and repair for our data center infrastructure. We take our customer requirements for uptime seriously and keep our facilities maintained to a very high standard to insure uninterrupted service for our customers. If you enjoy working on critical data center systems (UPSs, PDUs, Diesel Generators, ATS equipment and Building Controls), as well as industrial electrical equipment and systems that include power distribution components/wiring, electronic components and lighting systems. If you know the importance of getting it right the first time and not disrupting mission critical data centers. If you enjoy delighting customers with superior service and you have the desire and ability to do so, then please read on! Essential Job Functions * Work under limited supervision, both independently and within a team environment * Manage multiple one-time and/or ongoing projects * Respond to safety and emergency situations and maintain a safe and secure work environment * Use discretion and judgment in organizing workflow and adapting as priorities are modified due to a changing environment * Frequent contact with employees at all levels of the organization; frequent external contact with vendors Duties * Operate, perform maintenance and service repairs on critical Data Center systems (UPS, PDU, Diesel Generators, ATS equipment and Building Controls, Chillers, CRAH, ETC) * Develop reliability reports to ensure availability and capacity targets are achieved and maintained with 100% uptime * Coordinate, and oversee all maintenance vendors to ensure personnel safety, protect the Facility's critical equipment, and maintain power to the critical load * Create required MOPs (Method of Procedure), SOPs (Standard Operating Procedures) and EOPs (Emergency Operating Procedures) to ensure all maintenance activities are performed in accordance to them * Additional duties as assigned by Management Job Requirements * Minimum 1 year, 3+ years preferred, of "hands on" experience with the maintenance and repair of industrial electrical and mechanical systems in mission-critical facilities to include; emergency generators (Generators, Fuel Delivery systems and Parallel Switchgear), electrical distribution (MV/LV switchgear and associated controls), critical and essential PDUs, UPS, switchgear, HVAC, air handling units, computer grade cooling systems, and building monitoring/control systems * Demonstrate knowledge in operating, maintaining, repairing, inspecting and testing critical electrical distribution systems, HVAC systems and building management/automation equipment * Ability to read commercial building blueprints and understand electrical single lines and schematics * Knowledge of commonly-used concepts, practices, and procedures related to mechanical & electrical systems needed to run data centers * Technical Writing skills and experience; as well as creating, coordinating, updating and/or modifying MOPs/SOPs/EOP's for critical facilities equipment, to include supporting new systems and researching technical requirements * Work experience in the electrical or mechanical field is highly desired. Strong emphasis on technical skills/training, with intent to obtain license within a reasonable time * May be required to complete formal training in an area of specialty, such as UPS maintenance * Candidates must possess reliable transportation for reporting to work for shifts, or emergencies * Travel is expected to be less than 5%, occasionally for training purposes * Potential employees must complete a background check successfully Physical Demands and Special Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Ability to stand 1/3 - 2/3 of the time * Ability to walk 1/3 - 2/3 of the time * Ability to sit 1/3 - 2/3 of the time * Ability to climb and balance 1/3 - 2/3 of the time * Ability to stoop, kneel, crouch and crawl 1/3 - 2/3 of the time * Ability to reach with hands & arms 1/3 - 2/3 of the time * Ability to smell, talk & hear * Ability to use hands to type, handle & feel * Ability to reach with hands and arms * Ability to see at close and distance ranges and the ability to see color * Must be comfortable working in a high stress, fast paced environment with shifting priorities * Must be willing to work outside normal business hours, including weekends, late nights, holidays, and on-call support * Ability to lift up to 50 pounds 1/3 of the time Additional Details: * Salary Range: $47.00 - $57.00 per hour plus bonus, plus shift differential for graveyard shift or swing shift (this range is based on California market data and may vary in other locations) * Work week: Front Half - Sunday to Wednesday or Back Half - Wednesday to Saturday * Shift: 4x10s * Days 05:00am-3:30pm * Swing 1pm-11:30pm * Graveyard 9pm-07:30am #LI - Onsite #LI - PV1 We operate with No Ego and No Arrogance. We work to build each other up and support one another, appreciating each other's strengths and respecting each other's weaknesses. We find joy in our work and each other, actively seeking opportunities to inject fun into what we do. Our hard and efficient work is rewarded with an above market total compensation package. We offer a comprehensive suite of health and welfare, retirement, and paid leave benefits exceeding local expectations. Throughout the year, the advantage of being part of the Vantage team is evident with an array of benefits, recognition, training and development, and the knowledge that your contribution adds value to the company and our community. Don't meet all the requirements? Please still apply if you think you are the right person for the position. We are always keen to speak to people who connect with our mission and values. Vantage Data Centers is an Equal Opportunity Employer Vantage Data Centers does not accept unsolicited resumes from search firm agencies. Fees will not be paid in the event a candidate submitted by a recruiter without an agreement in place is hired; such resumes will be deemed the sole property of Vantage Data Centers. We'll be accepting applications for at least one week from the date this role is posted. If you're interested, we encourage you to apply soon-we're excited to find the right person and will keep the role open until we do!

Job Description Facilities Maintenance Technician Are you a person who enjoys helping others? Are you currently seeking fulfillment in your professional life? Hope Services is Silicon Valleys leading provider of services to people with developmental disabilities and mental health needs. We seek candidates who share our inspirations & aspirations. Selection of staff is made on a competitive basis, and we are committed to promoting diversity, equity, inclusion & belonging at all levels..>>>>> 2025 Winner of Mercury News Best in Silicon Valley <<<<<>>>>> ASPIRE to Excellence CARF Accredited <<<<<>>>>> 2024 Great Nonprofits Top-Rated Nonprofit <<<<<>>>>> Four-star Charity Navigator <<<<<>>>>> 2024 Candid Gold Seal of Transparency <<<<< *Compensation: $34.50 per hour Purpose:As a representative for our organization, you will be responsible for assisting with troubleshooting, diagnostics, repairs on buildings, industrial systems, vehicles, grounds and maintenance equipment for assigned facilities, with an emphasis on quality, integrity and communication. May include outreach and support to all HOPE sites. Assures good customer service and business practices. Principle Responsibilities:The following responsibilities represent the essential functions of the position. An employee in this classification is responsible for carrying out the following functions: Required knowledge, Skills and Abilities:1. Ability to communicate effectively, both verbally and in writing.2. Basic computer knowledge.3. Ability to facilitate systems and checks to assure delivery of quality service and product to internal and external customers.4. Knowledge of the principles of management, supervision, planning, fiscal management5 Knowledge of the principles of repair, maintenance and safety regulations.6. Ability to observe, evaluate, document verbally and in writing.7. Knowledge of basic electricity, plumbing, lighting, light carpentry, HVACR, and general maintenance procedures and disciplines.8. Possession of a universal CFC certification is a plus9. Practices safe work habits at all times and is knowledgeable of proper use of equipment, materials and supplies used in maintenance work.10. California Drivers License Physical and Environmental Conditions:The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Depending on assignment, may work indoors or outdoors. Extensive exposure to lifting, bending, twisting and crawling. May be required to handle heavy machinery, use computers, telephones and drive to locations. Exposure to noise, dust and pollens.Do you have what it takes to make a difference? Inspire and be inspired! Hope Services takes immense pride in maximizing our employee engagement. Will you join us?? Visit to find out more about us and the people we serve. Hope Services is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees not regardless of, but with consideration and appreciation for race, color, religion or belief, national, social or ethnic origin, sex, age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family or parental status, or any other status. PIa1ae0220f6f1-25405-39550911

Job DescriptionJob Title: Manufacturing Engineering Technician Job Description The Manufacturing Engineering Technician performs complex or specialized technical assignments, typically project-based, requiring independent work. This role involves using considerable judgment, a high degree of initiative, and creative approaches in troubleshooting while adapting to rapidly shifting priorities in a fast-paced environment. The technician monitors and improves manufacturing processes and recommends continuous improvement strategies for Manufacturing Engineering. Responsibilities • Perform complex or specialized technical assignments related to manufacturing projects., • Work independently to troubleshoot and solve technical issues., • Monitor and improve manufacturing processes., • Collaborate with engineers on equipment repairs and builds., • Make recommendations for continuous improvement in work processes., • Perform simple assembly, light equipment repair, and maintenance tasks such as swapping out fans or belts and conducting cleaning operations on dies.Essential Skills, • Proficiency in troubleshooting, assembly, and mechanical equipment maintenance., • Ability to work effectively with hands and demonstrate mechanical acumen., • Understanding and experience with 5S, Lean, and waste reduction methodologies.Additional Skills & Qualifications, • Willingness to learn and adapt to new challenges., • Exposure to Solidworks, Pro-E, AutoCAD, or other CAD software is preferred.Work Environment The work schedule is from 10:00 AM to 6:30 PM, Monday through Friday, with the possibility of overtime for those open to it. The environment is fast-paced, and the role requires adaptability to changing priorities and tasks. Job Type & Location This is a Contract position based out of Santa Clara, CA. Pay and Benefits The pay range for this position is $27.50 - $27.50/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job Description Maintenance Technician I US-CA-Cupertino Job ID: 2026-6037 Type: Regular Full-Time of Openings: 1 Category: Maintenance Nineteen800 Overview We are growing! Sares Regis Group of Newport Beach, California, is a privately held real estate development, investment and management firm that focuses on commercial properties and multifamily communities in the western U.S. Since its founding in 1993, SRG has developed and acquired more than $7 billion in commercial and residential assets. The company manages a combined portfolio of approximately 25 million square feet of office and industrial space and 30,000 apartment units. OPPORTUNITY: MAINTENANCE TECHNICIAN I - CUPERTINO, CA DAYS REQUIRED: WEDNESDAY - SUNDAY, 8AM - 5PM Sares Regis Group is seeking an experienced maintenance professional for our beautiful 204-unit community, Nineteen800! This is an excellent opportunity for someone looking to grow their career in the property management industry! Duties include but aren't limited to: • Works in turnover and renovation units, as well as responds to maintenance service requests., • Works on external, as well as internal repairs which may include, but is not limited to, drywall repairs, painting, fence and gate repairs, plumbing installation or repairs, appliance repairs, boilers and HVAC systems, and common area clean-up., • Participates in emergency and after hours coverage based on the established schedule or as required., • Sets up and operates machine tools such as lathe, grinder, drill, and milling machine to repair or fabricate machine parts, jigs and fixtures, and tools., • Fabricates and repairs cabinets, counters, benches, partitions, and other wooden structures., • Maintains or assists in maintaining inventory and prepares related paperwork., • Keeps storage facilities and equipment in an orderly, working condition. QUALIFICATIONS • Must have 1-2 years of experience in all trades (electrical, plumbing, drywall, paint, appliances, etc.), • Demonstrated knowledge and skill in performing quality work; able to use required tools and machinery; professional interaction with co-workers, residents and vendors; knowledge and continued education of OSHA requirements; knowledge of MSDS requirements appropriate to the scope of work., • Ability to read and interpret service orders and documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to effectively present information and respond to questions from employees, managers, clients, customers, and the general public., • High school diploma or GED, technical school, or three to six months related experience and/or training; or equivalent combination of education and experience., • Excellent customer service skills a must!, • Ability to work weekends required. Salary is $30.00/hour. We offer a competitive compensation package that includes a 401(K) match, rental incentive and renewal compensation, bonuses, and rental discounts depending on location. Regular full-time employees who work between 30-40 hours a week are eligible for medical, dental, vision, other voluntary benefits and vacation accrual. Sick time accrual is provided in accordance with law. PLEASE APPLY ONLINE AT: SARES REGIS CAREERS WEBSITE EQUAL OPPORTUNITY EMPLOYER All positions contingent on completion of successful background screen and drug test. PM21 PIf16deac10605-25405-39973550

Job DescriptionJob Title: Maintenance Technician IIJob Description As a Maintenance Technician II, you will utilize your expertise to support the Operations Maintenance team in repairing and maintaining material handling equipment and pneumatic systems throughout the building. This role offers the opportunity to install, maintain, and repair automated packaging and distribution equipment. You will also have the chance to mentor junior technicians, helping them grow in their roles. Responsibilities • Promote a safe working environment by following all safety procedures., • Complete preventative maintenance routines with proper documentation., • Troubleshoot electrical and mechanical problems related to all Material Handling Equipment (MHE), which includes belts, motors, photo-eyes, relays, and more., • Maintain positive working relationships across all of the Operations facility., • Track and store department inventory., • Move up to 49lbs and stand and walk during shifts lasting up to 12 hours, with or without reasonable accommodation.Essential Skills, • High school diploma or equivalent., • 2+ years of experience with automated conveyor systems and controls., • 2+ years of experience in the repair of material handling equipment., • 2+ years of experience conducting predictive and preventative maintenance procedures., • 1+ years of metal and wood fabrication., • 1+ years of blueprint and electrical schematic reading., • 1+ year of knowledge with electrical and electronic principles., • Ability to use a multimeter.Additional Skills & Qualifications, • 1+ years of Microsoft Office products and applications experience., • 1+ years of working with computers., • Experience with Material Handling Equipment (MHE) safety standards accordance with Original Equipment Manufacturer (OEM) and safety standards., • Project Management experience., • Experience with a Computerized Maintenance Management System (CMMS)., • Experience with robotic operation and maintenance., • Able to troubleshoot basic input and output functions., • Preferred: Associates or higher degree from a vocational school or college with a focus in the Mechanical or Electrical field. Company Benefits provided Workplace Type This is a fully onsite position in San Jose,CA. Application Deadline This position is anticipated to close on Mar 31, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Position Summary ADDC (Direct Digital Control) Controls Technician is responsible for installing,commissioning, troubleshooting, and maintaining digital control systems, PLCsystems used in HVAC, building automation, and industrial environments. Thisrole supports systems that integrate with protocols such as BACnet, LON, andModbus, and platforms including Tridium/Niagara, Honeywell, Delta, Siemens, orJohnson Controls Metasys. The technician ensures that control systems operateefficiently, reliably, and in accordance with design specifications and safetystandards. Key Responsibilities Installation & Commissioning * Install, configure, and program DDC systems, PLC systems for HVAC and building automation equipment (e.g., air handlers, chillers, boilers, pumps, VFDs). * Perform system startup, sensor verification, point-to-point testing, and integration with networked control systems. Troubleshooting & Maintenance * Diagnose and repair control system issues, including hardware failures, communication faults, and sensor calibration errors. * Conduct routine maintenance and performance testing to ensure optimal system operation. Programming & Configuration * Modify or develop system programs, logic sequences, and control strategies. * Configure network devices and communication paths for reliable operation across BACnet, LON, Modbus, or IP-based networks. Documentation * Maintain accurate records, including wiring diagrams, control schematics, programming revisions, test reports, and commissioning documentation. * Update as-built drawings and system documentation after modifications. Collaboration * Work closely with engineers, project managers, contractors, and facility operations teams to execute projects and resolve system issues. * Provide technical support during design reviews, site walkthroughs, and system commissioning. Safety & Compliance * Follow OSHA and company safety standards at all times. * Maintain a professional appearance, communicate clearly with stakeholders, and adhere to site-specific requirements, including secure facility protocols when applicable. Required Skills & Qualifications Technical Background Strong understanding of DDC hardware, PLC, HVAC fundamentals, hydronics, refrigeration, and building automation principles. * Knowledge of control sequences, PID loops, sensor types, and field devices. Software & Tools * Proficiency with DDC, PLC control programming interfaces, graphics programming and workstation software. * Experienced with Microsoft Office, handheld diagnostic tools, and PC-based configuration utilities. Networking Skills * Familiarity with BACnet (IP & MS/TP), LON, Modbus, and general IP networking concepts. * Understanding of addressing, routing, and device communication methods. * Understanding of PLC logic. Certifications (Preferred) * OSHA safety training * HVAC certifications (EPA 608, NATE, etc.) * PLC or building automation manufacturer certifications * Tridium/Niagara credentials highly beneficial Soft Skills * Strong analytical and problem-solving abilities * Attention to detail and documentation accuracy * Effective communication and teamwork * Ability to work independently in fast-paced, field-based environments Typical Work Environment * Field-based work in commercial buildings, industrial facilities, data centers, schools, or government sites. * May require travel between job locations, extended hours, or on-call availability. * Must be able to meet background check requirements for secure or government-related projects. Summary ADDC Controls Technician combines electrical, mechanical, and software expertiseto keep building automation and industrial control systems operatingefficiently, safely, and in alignment with engineered design. This role is keyto ensuring facility reliability, energy performance, and occupant comfort. Disclaimers Applicants must be currently authorized to work in theUnited States without the need for visa sponsorship now or in the future. We value humaninteraction to understand each candidate's unique experience, skills andaspirations. We do not use artificial intelligence (AI) tools to make hiringdecisions, and we ask that candidates disclose any use of AI in the applicationand interview process CBRE carefully considers multiple factors to determine compensation, including a candidate's education, training, and experience. The minimum salary for the ES Systems Engineer position is $90,000 annually and the maximum salary is 155,000 annually. The compensation offered to a successful candidate will depend on their skills, qualifications, and experience. Successful candidates will also be eligible for a discretionary bonus based on CBRE's applicable benefit program. This role will provide the following benefits: 401(K), Dental insurance, Health insurance, Life insurance, and Vision insurance. Equal Employment Opportunity: CBRE is an equal opportunity employer that values diversity. We have a long-standing commitment to providing equal employment opportunity to all qualified applicants regardless of race, color, religion, national origin, sex, sexual orientation, gender identity, pregnancy, age, citizenship, marital status, disability, veteran status, political belief, or any other basis protected by applicable law. Candidate Accommodations: CBRE values the differences of all current and prospective employees and recognizes how every employee contributes to our company's success. CBRE provides reasonable accommodations in job application procedures for individuals with disabilities. If you require assistance due to a disability in the application or recruitment process, please submit a request via email at or via telephone at +1 866 225 3099 (U.S.) and +1 866 388 4346 (Canada). CBRE, Inc. is an Equal Opportunity and Affirmative Action Employer (Women/Minorities/Persons with Disabilities/US Veterans)

Maintenance Mechanic Role with Global Product Leader / $25-$35 an hour depending on Experience / Excellent Benefits and Overtime This Jobot Job is hosted by: Ken McClure Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $25 - $35 per hour A bit about us: We are a Repair Industry Leader that has been in business over 50 years looking for a Skilled Maintenance Technician to join our growing team. Why join us? $25-$35 an hour depending on Experience Great Benefits 6am-2:30pm Position Overtime Available Job Details We are seeking a skilled Maintenance Mechanic to join our team and ensure the safe, reliable, and efficient operation of our industrial fabrication equipment. This role involves performing preventive maintenance, troubleshooting, and repairs, as well as supporting fabrication activities such as laser welding and bending operations. Key Responsibilities: Follow preventive maintenance (PM) schedules to minimize downtime and extend equipment life. Diagnose, troubleshoot, and repair mechanical, electrical, hydraulic, and pneumatic issues on fabrication equipment. Perform fabrication work including laser welding, bending, and related processes to support equipment repairs and modifications. Maintain, repair, and improve industrial machinery and production support systems. Document maintenance activities, repairs, and parts usage accurately. Ensure compliance with safety standards and company procedures at all times. Collaborate with production teams to minimize equipment interruptions and maximize uptime. Qualifications: Proven experience as a Maintenance Mechanic or Industrial Maintenance Technician in a fabrication or manufacturing environment. Strong knowledge of mechanical systems, hydraulics, pneumatics, and electrical troubleshooting. Hands-on experience with laser welding, bending, and fabrication processes. Ability to read and interpret technical manuals, blueprints, and schematics. Strong problem-solving skills and attention to detail. Ability to work independently and manage time effectively. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job DescriptionAbout Commonwealth Fusion Systems: Commonwealth Fusion Systems is on a mission to deliver the urgent transition to fusion energy. Combining decades of research, top talent, and new technologies, we’re designing and building commercially viable fusion power plants. And we're working with policymakers and suppliers to build the energy industry of the future. We’re in the best position to make it happen. Since 2018, we’ve raised nearly $3 billion in capital, making us the largest and leading private fusion company in the world. Now we’re looking for more thinkers, doers, builders, and makers to join us. People who’ll bring new perspectives, solve tough problems, and thrive as part of a team. If that’s you and this role fits, we want to hear from you. Join the power movement as a Facilities & Chemical Operations Technician We are seeking a skilled, hands-on Technician to support building maintenance, chemical operations, and Logistics (shipping/Receiving). This role supports site operations across three primary functional areas: Facilities (50%), Chemical Operations (25%), and Logistics/Shipping & Receiving (25%). The position is designed to provide flexible, cross-functional support to ensure safe, efficient, and compliant facility and laboratory operations. The role requires hands-on technical capability, strong attention to detail, and the ability to manage multiple responsibilities within a dynamic environment.What you'll do: • Facilities Support (50%), • Perform routine facility inspections and preventative maintenance activities, • Support building systems including HVAC, compressed air, vacuum, chilled water, and general utilities., • Assist with vendor coordination for service, maintenance, and repairs, • Respond to facilities-related issues and troubleshoot equipment malfunctions, • Support small construction, buildout, and space modification projects, • Maintain organized documentation of maintenance logs and compliance records, • Chemical Technician Support (25%), • Support chemical receiving, storage, labeling, and internal distribution in compliance with site EHS procedures, • Assist with hazardous waste handling and coordination with waste vendors, • Perform routine chemical inventory audits and reconciliation, • Ensure proper PPE usage and adherence to safety protocols, • Maintain accurate documentation for regulatory and internal compliance requirements, • Assist in maintaining chemical storage areas and secondary containment systems, • Logistics & Shipping/Receiving (25%), • Perform daily shipping and receiving activities (approx. 2–3 hours per day), • Receive, inspect, log, and distribute incoming shipments, • Coordinate outgoing shipments and maintain shipping documentation, • Maintain organized storage areas and manage inventory of supplies, • Support monthly physical inventory counts, • Ensure packages and materials are properly secured and trackedWhat we’re looking for:, • 2–5+ years of experience in facilities, technical operations, chemical handling, or logistics, • Basic understanding of mechanical systems, utilities, and troubleshooting, • Strong organizational skills and attention to detail., • Ability to lift up to 50 lbs and perform physical tasks throughout the shift, • Safety-first mindset, • Strong troubleshooting and problem-solving skills, • Ability to prioritize tasks across multiple functional areas, • Effective communication and collaboration, • High level of accountability and reliabilityBonus points for:, • Experience working in industrial, laboratory, semiconductor, or high-tech environments, • Familiarity with chemical safety standards and hazardous waste handling, • Experience with inventory systems or ERP platforms (e.g., Odoo or similar), • Forklift certification (or ability to obtain certification)Must-have Requirements:, • Perform activities such as stooping, climbing, standing, or sitting for extended periods of time, • Dedication to safety to mitigate industrial hazards that may include heat, cold, noise, fumes, strong magnets, lead (Pb), high voltage, and cryogenics, • Willingness to travel or work required nights/weekends/on-call occasionallySalary range for this full-time position + equity + benefits. The actual salary will depend on level, location, qualifications, and experience. The range displayed on each job posting reflects new hire salaries for the position across all US locations. Benefits include:• Competitive compensation with equity• 13 Company-wide Holidays• Flexible vacation days• 10 sick days• Generous parental leave policy• Health, dental, and vision insurance• 401(k) with employer matching• Professional growth opportunities• Team-building activities#LI-Onsite At CFS, we excel in fast-paced environments, driven by our values of integrity, execution, impact, and self-critique. As we grow, we’re eager to bring on mission-driven folks who offer diverse perspectives and fresh ways to tackle challenges. We value diversity deeply and are proud to be an equal opportunity employer by choice. We consider all qualified applicants equally, regardless of race, color, national origin, ancestry, citizenship status, protected veteran status, religion, physical or mental disability, marital status, sex, sexual orientation, gender identity or expression, age, or any other basis protected by law. This role requires compliance with U.S. laws concerning the export of controlled or protected technologies or information (collectively, “Export Control Laws"). Any offer of employment will be contingent on the need for compliance with such Export Control Laws.

Job DescriptionAbout the Role As a Facilities Technician at Rocket EMS, you will be responsible for ensuring our buildings, infrastructure, and facility systems operate safely, reliably, and efficiently. You'll perform preventive and corrective maintenance across HVAC, electrical, plumbing, compressed air, and general building systems, while supporting production teams with facility-related needs. This role requires strong troubleshooting skills, solid mechanical and electrical aptitude, and the ability to respond quickly to facility issues in a fast-paced manufacturing environment. Responsibilities * Perform preventive and corrective maintenance on facility systems, including HVAC, electrical distribution, lighting, plumbing, compressed air, exhaust systems, and building fixtures. * Diagnose and repair mechanical, electrical, and plumbing issues throughout the facility. * Respond rapidly to facility or utility interruptions to minimize operational downtime. * Maintain accurate records of inspections, PM logs, work orders, and repair documentation. * Support production teams by ensuring facility utilities—power, air, cooling, ventilation—are operating continuously and safely. * Coordinate with vendors, contractors, and internal teams for repairs, installations, and facility improvement projects. * Monitor and maintain facility infrastructure such as doors, docks, flooring, safety systems, and building access hardware. * Assist with installation and relocation of equipment requiring facility support such as power drops, air lines, ventilation, or anchoring. * Ensure all maintenance activities comply with building codes, safety standards, ESD protocols, and company procedures. * Identify facility improvement opportunities to enhance reliability, efficiency, and workplace safety. QualificationsEducation * High school diploma or equivalent (required) * Technical certification in HVAC, electrical, facilities maintenance, or related field preferred Experience * 2+ years of facility maintenance experience in a manufacturing, industrial, or commercial environment * Experience with HVAC systems, electrical troubleshooting, plumbing, compressed air, and general building repairs preferred Skills * Strong mechanical, electrical, and troubleshooting capabilities * Ability to read and interpret building schematics, technical manuals, and safety documentation * Familiarity with facility systems such as HVAC controls, electrical panels, compressors, and building automation systems * Basic computer skills (Excel, Word, Outlook) for work order management and reporting * Strong communication skills; able to work effectively with production, engineering, and leadership * Ability to prioritize tasks, manage multiple requests, and work under pressure Benefits * 401(k) with company match * Medical, dental, vision, and life insurance * Paid time off * Career growth opportunities in a high-tech manufacturing environment

Job Description SUMMARY OF JOB FUNCTION: The Equipment Maintenance Technician is responsible for performing a variety of routine and emergency maintenance to all Sierra Circuits, Inc. facilities and equipment as directed by the Maintenance & Facilities Manager. KEY RESPONSIBILITIES: Equipment Maintenance Technician * • Conduct periodic inspections on assigned equipment according to Preventive Maintenance Schedule (ISO Form 11-01-01-B)., • Perform preventative maintenance work on equipment and machineries to prevent breakdowns, costly repairs, and the development of unsafe conditions., • Promptly respond to and complete job requisitions according to request forms and submit to Maintenance., • Use proper tools and techniques to perform the required tasks in a professional and safe manner., • Research, order, and prepare spare parts needed with the most cost-effective solution., • Report any potential problems to the Maintenance Manager., • Perform daily housekeeping duties to maintain a clean and safe work environment., • Interact professionally and diplomatically with managers, co-workers, and vendors., • Be available for emergency maintenance., • May be required to operate a forklift., • Cleans shop and parts area at the end of every shift, • High school diploma, or equivalent required, • Minimum of 2-4 years of experience as a Maintenance Technician., • Strong Knowledge of Mechanical and Electrical Systems, as well as industrial equipment and machinery., • Be able to understand PLC ladder logic, • Ability to work with Voltage from ( 5V DC to 480V AC ), • Ability to assemble and align gears, bearings, and shafts, • Ability to inspect equipment for defects, • Ability to install and maintain various pipe systems, • Excellent problem-solving skills and the ability to troubleshoot complex issues, • Ability to read and interpret technical diagrams and manuals, • Strong communication skills and the ability to work well in a team environment, • Possess basic computer skills to complete work orders and other computer work as directed, • Experience with Preventive maintenance programs ( CMMS ), • High attention to detail and strong commitment to quality, • Understanding of safety and environmental regulations, • Ability to lift and work in physically demanding conditions, • Ability to operate a forklift if needed, • Follow and adhere to Lock-out / Tag-out procedures at all times, • Cleans shop and parts area at the end of every shift SUPERVISES: None PHYSICAL DEMANDS: The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully. While performing the duties of this job, the employee is regularly required to talk or hear. The employee must frequently stand, walk, and reach with hands and arms. The ability to lift 20 lbs., open filing cabinets, and bend, stand, or climb on step ladders as necessary. ENVIRONMENT: • The manufacturing facility is exposed to electronics assembly equipment and materials., • May require working in a controlled environment with specific temperature and humidity requirements., • Personal Protective Equipment (PPE) is required to perform the work. CA salary ranges $25 - $35 per hour with Benefits and Perks 6 am - 2:30 pm, 2:30 pm - 11:00 pm, and 10:00 pm - 6:30 pm.

Job Description SUMMARY OF JOB FUNCTION: The Equipment Maintenance Technician is responsible for performing a variety of routine and emergency maintenance to all Sierra Circuits, Inc. facilities and equipment as directed by the Maintenance & Facilities Manager. KEY RESPONSIBILITIES: Equipment Maintenance Technician * • Conduct periodic inspections on assigned equipment according to Preventive Maintenance Schedule (ISO Form 11-01-01-B)., • Perform preventative maintenance work on equipment and machineries to prevent breakdowns, costly repairs, and the development of unsafe conditions., • Promptly respond to and complete job requisitions according to request forms and submit to Maintenance., • Use proper tools and techniques to perform the required tasks in a professional and safe manner., • Research, order, and prepare spare parts needed with the most cost-effective solution., • Report any potential problems to the Maintenance Manager., • Perform daily housekeeping duties to maintain a clean and safe work environment., • Interact professionally and diplomatically with managers, co-workers, and vendors., • Be available for emergency maintenance., • May be required to operate a forklift., • Cleans shop and parts area at the end of every shift, • High school diploma, or equivalent required, • Minimum of 2-4 years of experience as a Maintenance Technician., • Strong Knowledge of Mechanical and Electrical Systems, as well as industrial equipment and machinery., • Be able to understand PLC ladder logic, • Ability to work with Voltage from ( 5V DC to 480V AC ), • Ability to assemble and align gears, bearings, and shafts, • Ability to inspect equipment for defects, • Ability to install and maintain various pipe systems, • Excellent problem-solving skills and the ability to troubleshoot complex issues, • Ability to read and interpret technical diagrams and manuals, • Strong communication skills and the ability to work well in a team environment, • Possess basic computer skills to complete work orders and other computer work as directed, • Experience with Preventive maintenance programs ( CMMS ), • High attention to detail and strong commitment to quality, • Understanding of safety and environmental regulations, • Ability to lift and work in physically demanding conditions, • Ability to operate a forklift if needed, • Follow and adhere to Lock-out / Tag-out procedures at all times, • Cleans shop and parts area at the end of every shift SUPERVISES: None PHYSICAL DEMANDS: The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully. While performing the duties of this job, the employee is regularly required to talk or hear. The employee must frequently stand, walk, and reach with hands and arms. The ability to lift 20 lbs., open filing cabinets, and bend, stand, or climb on step ladders as necessary. ENVIRONMENT: • The manufacturing facility is exposed to electronics assembly equipment and materials., • May require working in a controlled environment with specific temperature and humidity requirements., • Personal Protective Equipment (PPE) is required to perform the work. CA salary ranges $28 - $38 per hour with Benefits and Perks Day Shfit: 6:00AM- 2:30PM

Exciting opportunity to join a global building materials company delivering state of the art equipment to the steel and iron industry! This Jobot Job is hosted by: Matt Tassoni Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $110,000 - $130,000 per year A bit about us: Our client is an industry leading manufacturing company that delivers state of the art products to the steel and iron industry Why join us? Medical Dental Vision PTO 401K and more!! Job Details The Lead Service Engineer will oversee and coordinate all service activities across North America while managing a small field service team (USA, Mexico – 3 people). In addition to leading local service operations, this role will actively perform field service, installation, and commissioning activities, ensuring customers receive exceptional support and solutions. Key Responsibilities: Installation & Commissioning of New Systems Supervise installation and commissioning of advanced scanning systems through to final acceptance. Perform pneumatic, mechanical, and electrical start-ups for new systems. Configure and customize software for each system according to customer specifications. Services & Aftersales Support Conduct preventive and unscheduled maintenance on laser and scanning systems. Troubleshoot electrical, mechanical, pneumatic, and automation issues; perform first-level diagnosis and collaborate with the global technology center as needed. Execute mechanical, electrical, and pneumatic repairs; locally source replacement parts when necessary. Verify measurement accuracy and provide detailed performance reports to customers. Maintain accurate records of all activities using cloud-based customer tracking tools. Identify opportunities for system upgrades or new system sales. Respond promptly to customer service requests and proactively support customers experiencing challenges. Schedule and perform maintenance for customers under service contracts. Travel within the USA 50–75% of the time. North America Service Management Lead, train, and develop the local service team to ensure professional growth and high performance. Coordinate service activities, including planning, ticketing, and contract management. Ensure workload is balanced across the team and act as the primary local contact for post-sales service. Manage spare parts inventory and service tools for the team. Qualifications & Requirements Experienced technician or engineer in industrial maintenance, electromechanics, or mechatronics. Minimum 10 years of experience as a field service and commissioning engineer, ideally with small team management in heavy industry. Skills & Attributes Strong commitment to workplace safety and operational excellence. Excellent technical communication, analytical, and presentation skills. Proven problem-solving and decision-making abilities. Ability to build and maintain collaborative relationships with global, cross-functional teams. Proficient in Microsoft Office (Excel, Word, Outlook, SharePoint); CAD or modeling tools a plus. Highly motivated, proactive, and results-oriented. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description Job Posting – Vacuum Pump Sub Fab Technician Position: Vacuum Pump Sub Fab Technician SALARY $28 - $40/hr LOCATION 1125 Memorex Drive Santa Clara, CA 95050 FLSA Non-Exempt HOURS/WEEK 40 hours/week FULL OR PART-TIME Full Time, Onsite FMG Enterprises, located in Santa Clara, CA, is a privately owned vacuum pump, motor and blower rebuilder, seller, and service provider for clients in the semiconductor and industrial markets. Our primary business model includes sales and rebuilding of vane, piston, dry, turbo and cryogenic vacuum pumps as well as on-site process and maintenance available to our customers. As a growing company of 40 people, you will be a key player in providing onsite Vacuum pump services to one of our main semiconductor equipment suppliers. Summary Reporting to the FMG Service Manager, we are looking for a Semiconductor Tool Manufacturer Pump Technician. Job Duties • Respond to field engineering service calls which may include trouble shooting, installation, removal and minor repairs if needed, • Be the liaison between customers and FMG factory support team, • Abatement PM coordination, PO sustaining, managing suppliers as needed, • Pump troubleshooting, maintain pump inventories for all models, • Track pump usage hours and schedule maintenance/replacement, • HXs/Chillers trouble shooting and maintenance, sustain spare part list, manage work plans as needed, • Final evaluation and failure analysis reports We are looking for candidates who possess the following qualifications: • Prefer Technician related experience with semiconductor manufacturing or a similar mechanical background. Will consider a local, assertive 2 year degree or Trade school certificate candidate., • Solid verbal and written communication skills, strong work ethic, detail oriented, high sense of responsibility and a “can-do” attitude are a must, • Medical and dental insurance, • 401(k) plan, • Employer paid holidays and vacation leave

Job Description Field Service Technician III Copiers & Printers (Digital Imaging Equipment) US-CA-San Jose Job ID: 33162 Type: Full-Time of Openings: 1 Category: Field Service CUSA San Jose Branch About the Role Are you a hands-on technician who enjoys troubleshooting, fixing, and maintaining commercial printing and imaging equipment? Do you thrive in the field, solving problems, and supporting customers with high service standards? Canon USA is seeking a Field Service Technician III to join our service team. You’ll be responsible for on-site maintenance, diagnostics, and repair of Canon-supported copiers, printers, and multi-function imaging devices (MFPs) at client locations — often in a fast-paced, 24/7 customer-driven setting where responsiveness and reliability are key. Your Impact We’re searching for a true go-getter to: • Perform routine maintenance and break/fix repair of digital imaging equipment (copiers, printers, MFPs)., • Respond quickly and professionally to customer service calls in the field., • Maintain accurate service logs and reports, including Field Service Reports and Expense Reports., • Report product failure trends and serviceability issues to your manager with proper documentation., • Ensure all assigned equipment meets operational performance standards., • Represent Canon in a customer-facing role with professionalism and excellent communication skills., • Adhere to customer-specific site protocols, which may include COVID-19 or other safety measures., • Deliver exceptional service and support in a 24/7 customer-driven environment where uptime matters. About You: The Skills & Expertise You Bring Please note: this is a customer-facing role, and requires compliance with customer policies and protocols, which may include COVID-19 vaccination and other measures relating to COVID-19. We’re looking for a dedicated individual with: • Typically requires general and/or vocational training plus 2 to 4 years of related experience., • An Associate’s degree in electronics or electrical engineering capacity from an accredited college or technical school or equivalent experience., • Direct experience working as a field technician., • The capacity to meet or exceed the minimum performance standards for productive technical quality and customer satisfaction for assigned territory., • The ability to travel (valid driver’s license and acceptable driving record necessary)., • Capable of excelling in a 24/7 environment, while performing shift work and on-call rotations., • Required to take all necessary steps to obtain security and/or other clearances required by customers to enter the customers’ premises. This role is eligible for a transportation allowance. Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at . Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at . #CUSA Posting Tags #PM19 #LI-FL1 PI92da6ea158f8-25405-37869469

Job Description Job Description As a Technician, you will perform precision soldering and rework on complex Assemblies to high workmanship standards. You will execute advanced micro-soldering tasks, including handling fine-pitch SMD components, high pin-count connectors, and conducting QFN, LGA, and BGA rework, including reflow and reballing. Responsibilities • Perform precision soldering and rework on complex PCBAs to high workmanship standards., • Execute advanced micro-soldering tasks, including fine-pitch SMD components and high pin-count connectors., • Conduct QFN, LGA, and BGA rework, including reflow and reballing., • Diagnose and repair damaged pads, traces, vias, and connectors., • Support engineering debug by implementing board modifications, ECOs, and bodge rework., • Work from schematics, board layouts, and engineering guidance to execute accurate rework., • Document rework actions, common failure modes, and lessons learned., • Help define, improve, and standardize rework procedures and workmanship guidelines., • Train and support technicians and engineers on soldering best practices., • 5+ years of professional experience in electronics soldering and PCBA rework., • Extensive hands-on experience with fine-pitch and high-density PCBAs., • Proven expertise in micro-soldering under a microscope., • Strong understanding of PCB construction, component packages, and thermal behavior., • Ability to consistently produce clean, reliable, and inspectable rework., • High attention to detail and pride in workmanship. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description The Preventive Maintenance Technician is responsible for performing preventive maintenance, troubleshooting, and repairs on a wide variety of manufacturing equipment to support safe, efficient, and reliable production. This role supports 1st and 2nd shift operations and plays a key role in reducing downtime, improving equipment performance, and supporting current and future production growth initiatives. Key Responsibilities • Perform scheduled preventive maintenance on manufacturing, SMT, and support equipment., • Troubleshoot, diagnose, and repair mechanical, electrical, and pneumatic issues across multiple types of equipment., • Respond to production downtime and equipment-related issues in a timely manner., • Complete daily, weekly, and monthly maintenance checks and document work in maintenance systems (e.g., Voyager)., • Support operators and production teams with equipment troubleshooting and adjustments., • Repair or replace worn or damaged components such as nozzles, feeders, sensors, motors, fixtures, belts, and actuators etc., • Assist with installation, setup, relocation, and commissioning of new or existing equipment., • Support production and equipment move related to company growth and expansion., • Maintain a clean, organized, and safe work environment., • Follow all safety, ESD, and company policies and procedures., • Communicate equipment status, recurring issues, and spare-parts needs to leadership. Equipment Supported This position will support a broad range of manufacturing equipment, including but not limited to: • SMT Equipment (pick-and-place machines, stencil printers, reflow ovens, selective soldering systems), • Juki Pick-and-Place Machines, • Juki GKG Printers, • JT Juki Reflow Ovens, • Centurion Reflow Ovens, • Selective Soldering Equipment (Juki Intertec, and similar systems), • Wash machines and other production support equipment, • High school diploma or equivalent required; technical training or certification preferred., • 1+ years of experience in preventive maintenance, manufacturing, or industrial equipment support., • Working knowledge of mechanical, electrical, and pneumatic systems., • Ability to read and understand equipment manuals and maintenance documentation., • Strong troubleshooting and problem-solving skills., • Ability to work independently or as part of a team across multiple shifts., • Ability to lift up to 50 lbs and perform physical tasks required in a manufacturing environment., • Ability to stand, walk, bend, and work around operating machinery.

Job Description Hiring Medical Device Assemblers for a Catheter Medical Device Company in Santa Clara, CA! Description: • Working in a clean room environment, • Working under a microscope to assemble the catheter, • 6am-2:30pm Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Santa Clara,CA. Application Deadline This position is anticipated to close on Apr 10, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Ever-Green Energy is looking for a team member to maintain, repair, calibrate, install, and troubleshoot all plant control/measurement equipment: (electrical, electronic, pneumatic, and electromechanical) to ensure full and efficient operation of the plants. Performs the responsibilities as a Senior I&C position for the company, in accordance company standards. It is the responsibility of each Ever-Green Energy employee that all tasks be conducted in a safe and efficient manner complying with all local, state, and federal safety and health regulations, company policies, programmatic standards, and special safety concerns identified by Ever-Green Energy for use in a particular area or with a customer. All employees are expected to support and demonstrate the mission and values of the organization by leading with integrity and building an inclusive culture that respects, encourages, and supports employees of all backgrounds and beliefs. If this sounds like a great fit for you, you may be the right candidate for our Senior Instrumentation and Controls Technician. Minimum requirements to be successful in this role: • BAS/BMS, PLC, HMI and Instrumentation and Control formal training., • 3-5 years’ experience performing comparable duties in a similar industrial plant setting. Strong in Instrumentation and Controls., • Software and Database Maintenance: Daily alarm monitoring, perform backups of control logic, database files, and graphics. Software and Patching, schedule and setpoint reviews., • Physical Controller Maintenance: hardware inspections, tighten connections, battery replacement, and cleaning., • Field Device Maintenance: Override verifications, perform troubleshooting, maintenance, calibration and testing on all plant control/measurement equipment including wiring. Repair and replace faulty control/measurement equipment and perform preventative maintenance., • Determine the reason for unexpected malfunctions or occurrences in plant operations and take appropriate action to correct any electrical and/or instrumentation problems involved., • Help maintain a testing laboratory and test/repair all plant control and measurement equipment in order to ensure safe, reliable, and efficient operation of the plant., • Ensure parts for plant control and measurement equipment and consumables are ordered so replacements are available as needed., • Perform major and minor installation of equipment., • Respond to off-hour calls for plant emergencies., • Lead or assist vendors, as required, in conducting predictive and preventive maintenance tests and diagnostics as directed by the General Manager or Plant Superintendent., • Review plant modifications and projects, as requested, to ensure compatibility with existing plant and conformance with plant requirements and standards., • Layout and plan control/measurement installations and other electrical work and coordinate work with engineering, operations and other maintenance disciplines., • Support plant operations, including operating the Thermal Plant, as assigned by the Plant Superintendent or General Manager. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties and responsibilities of this position, the employee is constantly required to climb ramps/stairs; climbing ladders/scaffolding; communicating verbally by expressing or exchanging ideas by means of the spoken word to clearly impart oral information to other workers, customers, or the public; far visual acuity at 20 feet or more; the ability to hear, understand, and distinguish speech and/or other sounds; near vision acuity at approximately 20 inches or less; peripheral vision. The employee is frequently required to crouching; foot/leg controls; keyboarding; reaching at/below shoulder level by extending hand and arms from 0 to 150 degrees; sitting; and standing/walking. The employee is occasionally required to crawling; fine manipulation of picking, pinching, or otherwise working primarily with fingers rather than the whole hand; gross manipulation of seizing, holding, grasping, turning, or otherwise working with hands; kneeling; lifting and carrying at a max of 30 pounds; pushing; pulling; reaching overhead by extending hands and arms in a 150 to 180 degrees vertical arc; stopping, and confined space with limited entry or exit. Must be capable of maneuvering throughout industrial facilities such as energy plants and building HVAC mechanical rooms, etc. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position involves working in a steam, hot water, and/or chilled water plant and/or its distribution system. While performing job duties, employees may occasionally encounter potential hazards, including fumes, airborne particles, high-pressure steam in piping or equipment, both hot and cold temperatures, and hazards associated with moving machinery. The work environment's noise level typically ranges from moderate to loud. Other potential hazards common to heating and cooling plants may include confined spaces, slippery surfaces, rotating equipment, chemical handling (e.g., water treatment chemicals), and burns. Appropriate Personal Protective Equipment (PPE) is provided and physical controls are in place as needed to mitigate these risks. Wage Transparency Statement: We are committed to providing salary ranges for all open positions. Please note that the specific compensation for this role will be determined based on your experience, qualifications, location, and internal equity considerations. The hourly range for this position is: $52.00 to $58.50. This range reflects the base salary for this position. We have other benefits associated with this position which include: medical, dental, vision, Long-term and Short-Term Disability, Basic Life Insurance, Voluntary Life Insurance, HSA and Flexible Spending Accounts, Critical Illness, Accident Insurance, 401k with employer match, Employee Assistance Program, Tuition Reimbursement Program, LifeStyle Spending Account, PTO where we recognize an equivalency program up to 15 years, and 11 paid holidays including our favorite holiday: your birthday! EOE, including disability/vets

Job DescriptionSalary: About Ensurge Micropower Ensurge Micropower (OSE: ENSU) is a pioneer in solid-state microbattery technology, enabling the next generation of intelligent, connected devices. Leveraging proprietary thin-film and roll-to-roll manufacturing, Ensurge delivers safe, high energy-density batteries for applications in wearables, health tech, industrial sensing, and defense. With headquarters in San Jose and a global footprint spanning the U.S. and Europe, Ensurge is redefining what is possible in powering AI at the edge. Ensurgesolid-statemicrobatteriesoffer multiple times the energy density and charge cycles of lithium-ion alternatives.Our platform enables a wide range of battery shapes and form factors, unlocking new product designs and previously impossible applications Join our team of battery innovators in a dynamic, supportive start-up environment to enable the next generation of hearables, wearables, and IoT-connected sensors with Ensurges groundbreaking solid-statemicrobatteries. Role Overview Ensurge is seeking a Head of Equipment & Facilities Engineering to own the availability, reliability, and scalability of manufacturing equipment and facility infrastructure. This is a playercoach role spanning equipment engineering, maintenance, and facilities, responsible for keeping tools running today while designing systems that will scale tomorrow. Reporting to the COO, this leader partners tightly with Manufacturing Engineering and Technology to ensure equipment and infrastructure are fit-for-purpose, maintainable, and production-ready at every roadmap milestone. This role directly impacts uptime, yield, safety, and delivery and requires someone who can troubleshoot at the tool, coach engineers and technicians, and set the long-term technical direction. As Ensurge transitions from technology development into disciplined pilot manufacturing and scale, equipment reliability and facility robustness become mission-critical differentiators. Key Responsibilities Equipment Engineering & Reliability • Own equipment performance across pilot and production lines (uptime, availability, MTBF, MTTR), • Act as escalation point for complex tool issues hands-on when needed, • Define equipment standards, maintenance strategies, and spare parts philosophy, • Lead equipment qualification, acceptance, and process handoff in partnership with Manufacturing Engineering, • Drive root cause analysis and corrective actions for chronic equipment issues Maintenance Strategy & Execution • Build and lead a disciplined preventive and predictive maintenance program, • Establish clear ownership between engineering and maintenance without silos, • Develop technician capability through training, documentation, and coaching, • Implement CMMS discipline and data-driven maintenance prioritization, • Balance firefighting with long-term reliability improvements Facilities & Infrastructure • Own critical facility systems: utilities, vacuum, gases, HVAC, cleanroom, safety systems, • Ensure facilities support current processes and future scale requirements, • Partner with landlords, contractors, and vendors on upgrades and expansions, • Lead site readiness for audits, safety reviews, and regulatory compliance, • Proactively identify infrastructure risks that could limit throughput or yield Cross-Functional Integration • Partner with Manufacturing Engineering on tool/process matching and readiness, • Support Technology (R&D) during early tool development and process experimentation, • Enable Operations with stable, well-documented equipment and escalation paths, • Align Quality, EHS, and Facilities requirements into daily execution Scaling & Capital Readiness • Build the equipment and facilities roadmap aligned to product and capacity plans, • Support CapEx planning, vendor selection, FAT/SAT, and installation, • Ensure lessons learned from pilot tools feed into next-generation designs, • Prepare Ensurge for future site expansions or transitions with minimal disruption Leadership & Team Development (PlayerCoach) • Lead, mentor, and develop equipment engineers, facilities engineers, and technicians, • Set expectations for rigor, urgency, and ownership, • Establish clear roles, on-call structures, and escalation models, • Model hands-on leadership present at the gemba when it matters most What Were Looking For • Proven experience leading equipment and facilities engineering in advanced manufacturing environments (semiconductor, battery, thin film, electronics, or similar), • Strong hands-on background with complex manufacturing equipment and infrastructure, • Experience building reliability and maintenance systems from immature or reactive states, • Comfortable operating as both technical expert and people leader, • Able to prioritize under pressure without losing sight of long-term system health, • Located in, or willing toregularly workon-site in, the San Jose area Preferred Qualifications • Experience supporting pilot fabs or first-of-kind manufacturing lines, • Familiarity with vacuum systems, deposition tools, roll-to-roll equipment, or cleanroom operations, • Experience scaling facilities and infrastructure in constrained or leased environments, • Background implementing CMMS, spare parts strategies, and reliability KPIs, • BS/MS in Engineering or equivalent practical experience Personal Attributes • Playercoach mentality leads from the front and builds others up, • Calm under pressure, decisive in ambiguity, • Deep sense of ownership treats uptime and safety as personal responsibilities, • Collaborative, low-ego, and trusted across functions, • Disciplined problem solver with a bias toward action and learning

Job Description The Maintenance Supervisor is responsible for performing a variety of task, routine maintenance and emergency maintenance to all Sierra Circuits Inc. equipment as directed by the maintenance Manager. KEY RESPONSIBILITIES: Maintenance Supervisor • Supervising maintenance technicians and contractors., • Overseeing the maintenance staff and providing them with necessary training and support., • Conduct periodic inspections on assigned equipment according to the Preventive Maintenance Schedule (ISO Form 11-01-01-B)., • Coordinate and communicate effectively with other departments., • Prepare weekly Maintenance schedules and allocate work., • Complete daily end-of-shift pass-down reports., • Complete weekend preventative maintenance and project schedule., • Ensure the maintenance team follows all company policies and procedures., • Perform preventative maintenance work on equipment and machinery to prevent breakdowns, costly repairs and the development of unsafe conditions., • Promptly respond to and complete job requisitions submitted to maintenance., • Supervising that proper tools and techniques are performed to complete required tasks in a professional and safe manner., • Research, order, and prepare spare parts needed with the most cost-effective solution., • Report any potential problems to the maintenance manager., • Ensure daily housekeeping duties to maintain a clean and safe work environment., • Interact professionally and respectfully with all managers, co-workers, and vendors., • May be required to operate a forklift., • Ensuring that the shop and parts area are cleaned and organized at the end of each shift. QUALIFICATIONS - KNOWLEDGE/SKILLS- EXPERIENCE: • High school diploma, or equivalent required, • Mechanical skills, • Knowledge of hand and power tools, • Ability to perform mechanical functions, • Good computer skills, • Good communication skills, • Ability to work independently with minimal supervision, • Desire to work with small, flexible team of technicians, • Must be highly motivated and able to multi-task, • Ability to lift up to 50 pounds and stand/walk through-out the day, • Minimum of 4-6 years of experience as a Maintenance Technician., • Strong Knowledge of Mechanical and Electrical Systems, as well as industrial equipment and machinery, • Proficient in troubleshooting and repairing PLC’s, • Strong Electrical ability to work with voltage varying from ( 5V DC to 480V AC ), • Ability to inspect equipment for defects, • Fabricates and installs piping and tubing systems for a variety of operations, • Ability to install and maintain various pipe systems, • Ability to weld MIG, TIG, • Recognize waste and recommends initiatives for elimination or reduction, • Excellent problem-solving skills and the ability to troubleshoot complex issues, • Ability to read and interpret technical diagrams and manuals, • Strong communication skills and the ability to work well in a team environment, • Experience with Preventive maintenance programs ( CMMS ), • Ability to provide technical support and training to other team members as needed, • High attention to detail and strong commitment to quality, • Understanding of safety and environmental regulations, • Ability to lift and work in physically demanding conditions, • Ability to operate a forklift if needed PHYSICAL DEMANDS: The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully. While performing the duties of this job, the employee is regularly required to talk or hear. The employee must frequently stand, walk, and reach with hands and arms. The ability to lift 50 lbs., open filing cabinets, and bend, stand, or climb on step ladders as necessary. ENVIRONMENT: • Manufacturing facility with exposure to electronics assembly equipment and materials., • May require working in a controlled environment with specific temperature and humidity requirements., • Personal Protective Equipment (PPE) required to perform work.

Job DescriptionSalary: About R&G Telecomm Group R&G Telecomm Group supports carrier-grade network infrastructure deployments across the Americas. We partner with global technology manufacturers and network operators to deliver installation, deployment, and field-level support services within central offices, POPs, and data center environments. Our culture is built on ownership, accountability, and technical precision. We value professionals who take pride in their execution, work well in high-responsibility environments, and represent the company with integrity at customer sites. Position Summary The Central Office & Data Center Technician plays a critical role in supporting the execution of carrier-grade network deployments across central office and data center environments. This positionis responsible forensuring high-quality installation standards,maintainingsite integrity, and supporting field-level troubleshooting activities within live network environments. Key Responsibilities Installation & Build-Out • Perform rack-and-stack of telecom and optical transport equipment, including racks, shelves/chassis, patch panels, and cable management systems., • Install and connect AC/DC Power Cabling, • Run, dress,terminate, and patch fiber and copper cabling between equipment and patch fields (ODF/MDF/cross-connects)., • Maintain professional cable management standards (bend radius compliance,accuratelabeling, cleanliness)., • Support site infrastructure tasks such as mounting hardware, ladder rack/cable tray support, and equipment placement per site standards., • Perform onsite troubleshooting of physical layer issues (incorrect patching, dirty connectors, loose connections, damaged cables)., • Support equipment card replacements andassistwith provisioning/turn-up activities., • Participate in maintenance windows and urgent break-fix/outage response in coordination with the deployment team. Hands-on experience working with carrier-grade telecom and optical transport equipment such as: • Ciena (6500,Waveserveror similar platforms), • Nokia optical transport systems, • Infinera systems, • DWDM transport platforms, • IP routers and carrier switches, • Experience with equivalent carrier optical platforms is acceptable., • 2+ years of hands-on experience in telecom, central office, or data center environments, • Experience with rack & stack and structured fiber installations, • Exposure to carrier-grade network environments (transport/backbone systems), • Ability to read and follow technical documentation, diagrams, and MOPs, • Strong documentation discipline and attention to detail, • Ability to work independently and as part of a crew, • Professional communication skills, • Englishrequired; Spanish is a plus, • Willingness to travel up to 90% Work Conditions • Extensive travelrequired(primarily within the United States, with regional travel across the Americas as needed), • On-call shifts, nights, weekends, and maintenance windows may berequired, • Ability tolift upto 50lbs.and work in industrial/data center environments Work Authorization & Site Requirements Candidates must be legally authorized to work in the United States and able to access customer sites asrequired. Depending on customer or project requirements, background checks, drug screening, oradditionalsite clearance processes may berequired. Compensation & Benefits Base salary: $45,000 $50,000 per year Benefits include 401(k) matching, paid time off, and paid training. Equal Opportunity Employer R&G Telecomm Group is an Equal Opportunity Employer and considers all qualified applicantsin accordance withapplicable law.

Job DescriptionCompany Description Veolia Group is a global leader in environmental services, operating across all five continents with nearly 218,000 employees. Specializing in water, energy, and waste management, Veolia Group designs and implements innovative solutions for decarbonization, depollution, and resource regeneration, supporting communities and industries in their ecological transformation. Within this framework, Veolia's Water Technology Business brings together a dedicated team of experienced professionals committed to tackling the world’s most complex challenges related to water scarcity, quality, productivity, and energy. Together, we pursue a shared mission to create a more sustainable future. Job Description Job Summary: As a Plant RO Technician, you’ll be on the front and back end of providing maintenance and quality control expertise on all types of mobile water treatment systems for customers all over the world. This mission critical role involves working on a variety of technologies including (but not limited to) reverse osmosis (RO), ultrafiltration (UF), Gas Transfer Membrane (GTM) among others. Completes duties and tasks as directed by the Membrane Supervisor and Production Manager. Key Characteristics • Strong communications skills, • Excellent mechanical aptitude and problems solving skills, • Operate and optimize equipment performance, • Strong commitment to VPP standard Health and Safety requirements and all ISO quality procedures, • Computer proficient, • Carry out mechanical, electrical and controls troubleshooting on equipment such as valves, pipe, air compressors, dosing pumps, blowers, instrumentation, among others., • Maintain all ISO QC documentation from start to finish for all equipment being worked on., • Perform analytical testing such as chlorine, pH, CO2, O2, Conductivity, Rejections, Recoveries, etc. Document and report all findings for approvals and be able to troubleshoot issues that are out of compliance., • Identify and pull parts to be loaded on equipment for job start ups and identify returning equipment to be returned to inventory., • Perform membrane cleanings and sluicing of media as needed., • May be utilized to assist the plant maintenance or electrical departments for various plant projects and issues as needed., • Delivers external customer satisfaction through on-time preparation; through continuous improvement initiatives and value-added projects that will ensure quality of equipment completed while considering cycle timesQualifications Knowledge, Skills & Abilities Required • High School Diploma, G.E.D., Home School Certification, or international equivalent to High School Diploma, • Valid drivers License, • Basic Computer Skills, • Use of hand and power tools. Preferred: • 2 years of experience in industrial, refineries, water treatment or chemical plants., • Mechanical and electrical/instrumentation experience., • Forklift experience., • Basic PLC experience, • Ability and willingness to perform physical duties such as lifting, climbing, • Working with chemicals for water treatment., • Ability and willingness for on call status for emergency response, • Ability to work on a rotating shift of nights, days and holidays. Additional Information At Veolia, we realize diverse teams make smarter decisions, deliver better results, and build stronger communities. We’re an organization that champions diversity and inclusion at every rung of the ladder and are proud to be an equal opportunity workplace. Because our people are our greatest assets, we also offer competitive compensation and benefits that include: Compensation - The salary range is tied to the market for similarly benchmarked roles. The range is not an absolute, but a guide, and offers will be based on the individual candidate’s knowledge, skills, experience, and market conditions, as well as internal peer equity. Depending upon all the preceding considerations for the final selected individual candidate, the offer may be lower or higher than the stated range: $24.00-$26.50 ● Life Insurance ● Paid Time Off ● Paid Holidays ● Parental Leave ● 401(k) Plan - 3% default contribution plus matching! ● Flexible Spending & Health Saving Accounts ● AD&D Insurance ● Disability Insurance ● Tuition Reimbursement Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law. **Applicants are required to be eligible to lawfully work in the U.S. immediately; employer will not sponsor applicants for U.S. work authorization (e.g. H-1B visa) for this opportunity** Veolia does not accept unsolicited resumes from external recruiting firms. All vendors must have a current and fully executed MSA on file before submitting candidates. Any unsolicited resumes and candidate profiles will be deemed the property of Veolia, and no fee will be due. As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.

Job Description DIESEL MECHANIC – Keep Our Fleet Running Smoothly! Are you a skilled and experienced diesel mechanic looking to take your career to the next level? At Lux Bus America, we offer the opportunity to work on a fleet of state-of-the-art luxury motor coaches, expanding your expertise and applying your technical skills in a dynamic, professional environment. Whether you’re an entry-level technician or a senior-level expert, we provide the resources and support to help you grow. What You’ll Do: • Diagnose, repair, and maintain luxury motorcoaches and fleet vehicles to ensure optimal performance., • Conduct comprehensive preventive maintenance inspections and repairs., • Troubleshoot and service engines, transmissions, electrical systems, HVAC, brakes, and other critical components., • Utilize cutting-edge diagnostic tools and technology to improve efficiency and precision., • Work in a team-oriented environment that prioritizes safety, training, and excellence. What We Offer: • Competitive Pay – Get rewarded for your skills and experience., • Comprehensive Benefits Package – Medical, Dental, Vision, Life Insurance, and more., • Career Growth Opportunities – Professional development, training, and advancement paths., • State-of-the-Art Facilities – Work with top-tier tools, equipment, and technology., • Paid Time Off & Holidays – Because your time matters., • 401K Retirement Plan with Company Matching – Secure your financial future., • Ongoing Training & Certification Assistance – Support for ASE certifications and professional growth., • Strong Operations Support – We ensure our mechanics have the resources they need to succeed. Supplemental Pay: • $2,000 Sign-On Bonus for qualified mechanics., • $2,000 Referral Bonus – Help us grow our team!, • A Sign-On bonus will be paid after 90 days and again after 9 months of employment. Please note that taxes will apply to the sign-on bonus., • Monthly Tool Allowance, • Yearly Boot Allowance Schedule: • Monday- Sunday (Must be able to work weekends when needed), • Overtime required when needed, • 40-hour weekly guarantee– Job security you can count on Position Responsibilities: • Knowledge of diesel engines, automotive gas engines, brake systems (air & hydraulic), and electrical systems, along with general knowledge of any heavy equipment repairs., • Perform preventative maintenance, diagnostics, and repairs in a safe, efficient, and well-equipped work environment, • Diagnostics and repairs of diesel engines, automotive gas engines, powertrains, HVAC systems, steering systems, electrical systems, cooling systems, and brake systems, • Conduct DOT, BIT inspections, DVIR compliance, and CHP compliance repairs Requirements: • Minimum 2-8 years’ experience working on diesel trucks or commercial buses, • Handles routine repairs, including oil and tire changes., • Running diagnostic tests on diesel engines and interpreting the results to offer suitable solutions, • Knowledge of Heavy-Duty diesel and Gas Automotive engines., • Technical degree in diesel or industrial technology (Preferred), • Valid California driver’s license, • Ability to read, write, and communicate effectively in English is required. Pay Rate: • The hourly wage range that Lux Bus America reasonably expects to pay for the position is $35.00/hr.-$51.00/hr., • Tech 1: $35.00/hr.-$38.00/hr., • Tech 2: $38.00/hr.-$45.00/hr., • Tech 3: $45.00/hr.-$51.00/hr. Who we Are! Lux Bus America is an innovator of safe, reliable, luxury transportation, we showcase our passion in each and every interaction with our employees, clients and within our community. Our commitment to excellence and integrity makes us the only choice in world-class refined service. We aren’t your typical bus company. And to us, you’re not a typical employee. If you are looking for a career and not just a job, you came to the right place! We invest in our team members with a competitive wage, professional paid training, staff appreciation events, driver safety awards, and so much more. These are the cultural perks that make us so fantastic to work for! EEO Statement At Lux Bus America we value a diverse, inclusive workforce and provide equal employment opportunity for all applicants and employees. All qualified applicants for employment will be considered without regard to an individual’s race, color, sex, gender identity, gender expression, religion, age, national origin or ancestry, citizenship, physical or mental disability, medical condition, family care status, marital status, domestic partner status, sexual orientation, genetic information, military or veteran status, or any other basis protected by federal, state or local laws. Similarly, Lux Bus America will not tolerate discrimination or harassment based on any of these characteristics. We are committed to celebrating all dimensions of diversity in the workplace equally and ensuring that everyone feels a sense of inclusion and belonging. We also aim to extend this commitment to the partners we work with and the communities we serve. We are constantly listening, learning, and evolving to improve on these principles. We are proud of our collaborative culture. Our diverse employee population enables us to connect with our customers and turn their feedback into meaningful action. Our culture attracts top talent with shared values and forms the foundation for a great place to work! Lux Bus America will consider qualified applicants with a criminal history pursuant to the California Fair Chance Act. You do not need to disclose your criminal history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Lux Bus America is concerned about a conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. Find out more about the Fair Chance Act by visiting calcivilrights.ca.gov/fair-chance-act/. Company DescriptionSince 2003, Lux Bus has positioned itself as a trusted provider of high-quality charter and commuter bus transportation services across Southern California. In 2011, we expanded our service offerings to Northern California. Further demonstrating our commitment to excellence in transportation. We are excited to announce that our Anaheim location was recognized as a Top Workplace by the Orange County Register in 2024 and 2025. As an industry leader, we prioritize safety, reliability, and luxury in our transportation services. Our commitment to providing outstanding service to our customers remains unwavering. We encourage individuals who are interested to apply and join the Lux Bus America team by completing the application below.Since 2003, Lux Bus has positioned itself as a trusted provider of high-quality charter and commuter bus transportation services across Southern California. In 2011, we expanded our service offerings to Northern California. Further demonstrating our commitment to excellence in transportation. We are excited to announce that our Anaheim location was recognized as a Top Workplace by the Orange County Register in 2024 and 2025. As an industry leader, we prioritize safety, reliability, and luxury in our transportation services. Our commitment to providing outstanding service to our customers remains unwavering. We encourage individuals who are interested to apply and join the Lux Bus America team by completing the application below.

Job Description About Coresite At CoreSite, we empower a more connected future through high-performance data centers and interconnection solutions. Recognized as a trusted partner in digital transformation, our strategically located facilities and innovative services enable businesses to connect, collaborate, and grow in an ever-evolving technological landscape. Our culture is defined by operational excellence and a relentless drive for innovation. We foster a collaborative environment where every team member is valued, wins are celebrated as a team, and ownership is part of our DNA. At CoreSite, we’re not just building state-of-the-art infrastructure—we’re creating a community of forward-thinkers committed to solving complex challenges and delivering exceptional customer experiences. At CoreSite not only are we Committed to Excellence, but we also Build Connections, Own It, Do the Right Thing, Have Fun, and Win as a Team. Join us and be part of a team that is shaping the future of digital infrastructure while nurturing your professional growth and success. *This is not the official job application; this posting is specifically for CoreSite SkillBridge program. Please note that this program is exclusively for Military Spouse Fellows or Active-duty US military personnel transitioning out of the military to civilian workforce. SkillBridge Data Center Technician Role: The SkillBridge Data Center Technician assists in the operational integrity, security, and regulatory compliance of the data center. The technician will gain working knowledge of data center operations including telecommunications, mechanical, electrical, and fire life safety systems as well as data center operating procedures. The technician will be responsible for day-to-day operations of the data center including facilities and telecommunication infrastructure. The responsibilities are wide ranging and multi-disciplinary. Mechanical responsibilities will include working on chilled water systems and components, HVAC systems such as roof top units, CRAC/CRAH units, humidification systems, and central plant operations. Electrical responsibilities will include working on electrical/critical power distribution from the Utility/Generator main switchgear through the UPS systems out to the customer load including power circuit installations. Fire Life Safety responsibilities will include monitoring wet sprinkler systems and pre-action sprinkler systems as well as their associated detection devices. Telecommunications responsibilities will include cross connect installations, cabling infrastructure management, advanced remote hands support, and customer cage and cabinet build outs. Other responsibilities will include customer infrastructure build-outs (cage builds, overhead installations, rack and stack), cable termination and testing, maintenance work, monitoring and responding to mechanical, electrical, fire protection, telecom, and security systems. These systems include, transformers, PLC’s, generators, switchgear, UPS systems, STS’, ATS’ PDU’s, chilled water systems, CRAC/CRAH, wet sprinkler systems and pre-action sprinkler, network equipment, transmission media, cabling infrastructure, security hardware, and CCTV. Duties: • Operate, monitor, maintain, and respond to abnormal conditions in facilities systems. Areas include: Electrical, Mechanical, Communications, Building Monitoring and Control., • Completion of CoreSite’s Data Center Operations Qualification Program., • Ensure data center operates at maximum operational efficiency, including analyzing existing operating conditions, recommending new technologies, and improving overall efficiency and cost reduction as per Coresite guidelines., • Manage systems to avoid unplanned, customer-impacting outages., • Follow direction from data center management regarding the data floor and back of house mechanical loading capacity thereby ensuring that the cooling system is operating at its highest efficiency., • Work with contractors and consultants for all system expansions, corrections and upgrades., • Work with the senior technicians to track and complete an aggressive preventive and predicative maintenance schedule., • Assist with the database management of maintenance discrepancies and work with to resolve site issues based on agreed upon priorities., • Trouble ticket and remote hands management., • Fiber and Copper cabling terminations., • Circuit path creation and verification., • Coordinate and oversee power installations and upgrades., • Complete work orders., • Infrastructure projects including cage and cabinet build-outs, overhead installations, and rack and stack., • Navigate and utilize a CMMS system., • Use developed procedures to solve problems., • Assist in asset and consumable inventory management., • Tracking and trending operational characteristics., • Tracking and proper labeling of all equipment per established procedures., • Provide day-to-day exceptional customer service and support., • Incident escalation, response, and follow-up report writing., • Maintain and complete regular facility and security tours documenting and responding to found issues., • Manage building service requests through resolution., • Perform and complete work orders and customer service tickets in a timely manner., • Provide applied mechanical and integrated control expertise for the entire data center., • Serve in a technical writing capacity in regard to the derivation of procedures for preventative or corrective maintenance activities., • Adhere to and promote CoreSite’s Principles of Operational Excellence, culture, and Core Values. Requirements Knowledge, Skills, and Abilities: Interaction with Others -This position is required to interact with CoreSite personnel, vendors, partners, contractors and clients. Work Attributes: Knowledge- • Firm and proven understanding of the electrical and mechanical systems used in a data center environment., • Firm and proven understanding of fiber optics / cabling infrastructure and industry best practices., • Firm and proven understanding of Proficient knowledge of NEC, NFPA 70E, NFPA 72, NFPA 25, and compliance issues as well as building codes in regard to fire life safety., • Proficient knowledge in industrial safety best practices (i.e. lockout/tag out, arc flash protection, OSHA and state regulations)., • Proficient and experienced with data trending / tracking and analysis and ability to rapidly learn and use PC based, integrated critical monitoring systems. Skills- • Minimum of 2 years experience installing, maintaining, and/or troubleshooting large commercial and industrial systems including:, • Chilled Water Systems, Large Centrifugal Chillers, Cooling Towers, Heat Exchangers, Water Treatment Systems, VFD’s and Pumps, HVAC equipment, CRAC/CRAH’s, Humidification Systems, BMS and PLC Controls, Emergency Standby Diesel Generator Systems, Fuel/Oil systems, 480/277 and 208/120 electrical generation and distribution, Static UPS Systems, Double Interlock Pre-Action Systems, Communications cabling, Cabling infrastructure, Network infrastructure and hardware., • Experience laying out, pulling, dressing, and terminating fiber and copper communications cabling., • Experience diagnosing and repairing IT hardware, servers, network switches, structured cabling., • Proven leadership skills, • Excellent communication skills, both written and oral, • Proficient with Microsoft Office (Word, Excel, PowerPoint) Abilities - • Ability to communicate effectively with customers and internal staff., • Ability to coordinate, supervise and communicate with contractors who perform maintenance or upgrade work on these systems., • Ability to learn quickly and address issues as they arise during normal working hours or after hours., • Ability to operate in and promote a rigorous process-driven team environment, • Ability to logically analyze and solve problems, • Ability to effectively multi-task multiple projects, • Operate Hand and Machine Tools (hammer, drill, saw, etc.), • Operate electrical tools such as a multi-meter or infrared camera Education/Experience- • Military service members eligible for the DoD SkillBridge Program, • High school diploma or general education degree (GED) Not only does CoreSite have a fun, team-focused work environment, but we also offer great benefits to all employees regularly scheduled to work more than 20 hours a week! • First-day medical insurance through Cigna with generous premium cost coverage, • Dental insurance through Delta Dental, • Vision insurance through VSP, • Telemedicine through MDLive for CignaHealthcare and dependent care flexible spending account (FSA) plansHealth saving account (HSA) plans for employees participating in the High Deductible Health PlanLife, AD&D, short-term disability, and long-term disability insurance fully paid by the company, • Voluntary coverage benefits for supplemental life, critical illness, accident, and hospital insurance, • First-day eligibility for 401(k) savings plan through Fidelity, which includes an attractive matching company contribution with a 5% company match, • Discretionary annual bonus and equity incentive plan, • Employee stock purchase plan (ESPP) with a 15% discount16 days of paid time off (PTO)11 paid company holidays and additional floating holidays, • Additional paid time off for school events, elder care, volunteering, bereavement, jury duty, voting, parental leave and disability leave, • Free parking or a company contribution toward a public transit pass Additional Perks, • Wellness Reimbursement Program: Yearly stipend of $500 for employees and $300 for dependents, up to $800 total for the family, • Wellness Incentive Program: Participate in various wellbeing activities to earn up to $450 per year in cash incentives, • Technology Stipend: $100 monthly stipend., • Educational Reimbursement Program: Work-related learning and development with reimbursement on qualifying degree programs, up to $5,250 per year, • Giving Back: Charitable donation matches up to $5,000 per year and nominate organizations for Company Foundation grants, • Financial Management: Access to financial coaching, digital tools and services to manage and pay student loan debt quicker, • Pet Insurance: Keep your furry friends healthy and happy, • Family Planning: Benefits and services related to fertility, pregnancy, menopause, adoption and surrogacy, • Employee Assistance Program: 24x7 service to support family, work, money, health, legal and life challenges, • Counseling and Caregiving, • Programs: Including access to mental health services, licensed counselors, and caregiving tools including membership for finding care., • Referral Bonus: Receive a $3,000 cash bonus if referred candidate is hired and meets eligibility requirements, • Discounts: Discounts, cash back offers and perks on thousands of brands, • LinkedIn Learning Membership: Support your development when accessing LinkedIn’s online library of courses and videos General Statements - Applicants must be currently authorized to work in the United States on a full-time basis. The employer will not sponsor applicants for work visas. Please note that all offers of employment are contingent upon the successful completion of a background check and, where permitted by law, a 5-panel drug test conducted after the offer letter is signed, which will screen for THC, opiates, PCP, cocaine, and amphetamines. Thank you for your understanding and cooperation. Applicant Privacy Notice: CoreSite is committed to protecting the privacy and security of personal information submitted by applicants. The California Consumer Privacy Act (CCPA) requires us to provide you information about our personal information handling practices. As a result, we’re providing this Privacy Notice that describes how we collect, use, share, and update personal information from individuals who wish to be considered for employment with CoreSite. To read the Applicant Privacy Notice, please go to . Unauthorized reproduction or distribution of this job posting on external sites is prohibited without prior written consent from CoreSite. We are not responsible for any postings or offers not originating from our official channels or approved partners.

Job Description:\n\nAbout Coresite At CoreSite, we empower a more connected future through high-performance data centers and interconnection solutions. Recognized as a trusted partner in digital transformation, our strategically located facilities and innovative services enable businesses to connect, collaborate, and grow in an ever-evolving technological landscape. Our culture is defined by operational excellence and a relentless drive for innovation. We foster a collaborative environment where every team member is valued, wins are celebrated as a team, and ownership is part of our DNA. At CoreSite, we’re not just building state-of-the-art infrastructure—we’re creating a community of forward-thinkers committed to solving complex challenges and delivering exceptional customer experiences. At CoreSite not only are we Committed to Excellence, but we also Build Connections, Own It, Do the Right Thing, Have Fun, and Win as a Team. Join us and be part of a team that is shaping the future of digital infrastructure while nurturing your professional growth and success. Data Center Technician III Role The Data Center Technician III assists in the operational integrity, security, and regulatory compliance of the data center. The technician is to have a strong knowledge of telecommunications, mechanical, electrical, and life safety systems as well as data center operating procedures. We are currently hiring for the Swing Shift: 3:00pm-11:30pm Tuesday-Saturday A Tier III technician will be responsible for day to day operations of the data center including facilities and telecommunication infrastructure. The responsibilities are wide ranging and multi-disciplinary. Mechanical responsibilities will include working on chilled water systems and components, HVAC systems such as roof top units, CRAC/CRAH units, humidification systems, and central plant operations. Electrical responsibilities will include working on electrical/critical power distribution from the Utility/Generator main switchgear through the UPS systems out to the customer load including power circuit installations. Fire Life Safety responsibilities will include monitoring wet sprinkler systems and pre-action sprinkler systems as well as their associated detection devices. Telecommunications responsibilities will include cross connect installations, cabling infrastructure management, advanced remote hands support, and customer cage and cabinet build outs. Responsibilities will include customer infrastructure build-outs (cage builds, overhead installations, rack and stack), cable termination and testing, maintenance work, monitoring and responding to mechanical, electrical, fire protection, telecom, and security systems. These systems include, transformers, PLC’s, generators, switchgear, UPS systems, STS’, ATS’ PDU’s, chilled water systems, CRAC/CRAH, wet sprinkler systems and pre-action sprinkler, network equipment, transmission media, cabling infrastructure, security hardware, and CCTV. Duties:Completion of CoreSite’s Data Center Operations Qualification Program to the tier level at which you are hired within the first nine (9) months of employment.Operate, monitor, maintain, and respond to abnormal conditions in facilities systems. Areas include: Electrical, Mechanical, Communications, Building Monitoring and Control.Tracking and trending operational characteristics.Provide feedback to management on the effectiveness of existing standards and processes.Works with contractors and consultants for all system expansions, corrections and upgradesWork with the senior technicians to track and complete an aggressive preventive and predicative maintenance schedule.Ensure data center operates at maximum operational efficiency, including analyzing existing operating conditions, recommending new technologies, and improving overall efficiency and cost reduction as per CoreSite guidelines. Ideal candidate will have a demonstrated technical ability and innovative thinking cross functionally, including integrated systems and IT.Manage systems to avoid unplanned, customer-impacting outages.Navigate and utilize a CMMS system.Provide day-to-day exceptional customer service and support.Maintain and complete regular facility and security tours documenting and responding to found issues.Assist with the database management of maintenance discrepancies and work with to resolve site issues based on agreed upon priorities.Follow direction from data center management regarding the data floor and back of house mechanical loading capacity thereby ensuring that the cooling system is operating at its highest efficiency.Trouble Ticket and Remote Hands ManagementFiber and Copper cabling terminationsCircuit path creation and verificationCoordinate and oversee power installations and upgradesWork Order Completion ProcessInfrastructure projects (Internal/Customer)Cage and Cabinet Build-OutsOverhead InstallationsRack and Stack Use developed procedures to solve problemsAssist in asset and consumable inventory management.Responsible for the tracking and proper labeling of all equipment per established procedures.Incident escalation, response, and follow-up report writingManage building service requests through resolution.Perform and complete work orders and customer service tickets in a timely mannerServe in a technical writing capacity in regard to the derivation of procedures for preventative or corrective maintenance activities.Adhere to and promote CoreSite’s Principles of Operational ExcellenceProvide applied mechanical and integrated control expertise for the entire data center. Requirements This position is required to interact with CoreSite personnel, vendors, partners, contractors and clients. KnowledgeFirm and proven understanding of the electrical and mechanical systems used in a data center environment.Firm and proven understanding of fiber optics / cabling infrastructure and industry best practices.Firm and proven understanding of Proficient knowledge of NEC, NFPA 70E, NFPA 72, NFPA 25, and compliance issues as well as building codes in regard to fire life safety Proficient knowledge in industrial safety best practices (i.e. lockout/tag out, arc flash protection, OSHA and state regulations) Proficient and experienced with data trending / tracking and analysis and ability to rapidly learn and use PC based, integrated critical monitoring systems SkillsMinimum of 2 years experience installing, maintaining, and/or troubleshooting large commercial and industrial systems including: Chilled Water SystemsLarge Centrifugal ChillersCooling TowersHeat ExchangersWater Treatment SystemsVFD’s and PumpsHVAC equipmentCRAC/CRAH’sHumidification SystemsBMS and PLC ControlsEmergency Standby Diesel Generator SystemsFuel/Oil systems, 480/277 and 208/120 electrical generation and distributionStatic UPS SystemsDouble Interlock Pre-Action SystemsCommunications cabling Cabling infrastructureNetwork infrastructure and hardwareExperience laying out, pulling, dressing, and terminating fiber and copper communications cabling.Experience diagnosing and repairing IT hardware, servers, network switches, structured cabling.Proven leadership skillsExcellent communication skills, both written and oralSuite (Word, Excel, PowerPoint, Project) AbilitiesAbility to communicate effectively with customers and internal staff.Ability to coordinate, supervise and communicate with contractors who perform maintenance or upgrade work on these systems. Ability to learn quickly and address issues as they arise during normal working hours or after hours.Ability to operate in and promote a rigorous process-driven team environmentAbility to logically analyze and solve problemsAbility to effectively multi-task multiple projectsOperate Hand and Machine Tools (hammer, drill, saw, etc.)Operate electrical tools such as a multi-meter or infrared camera Education/ExperienceHigh School Diploma or greater2-5 years of experience in the data center industry Be able to pass an extensive background check, including criminal history, personal references, employment and education verification, and Department of Motor Vehicle and credit check Physical Demands and Special Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to stand 1/3 – 2/3 of the timeAbility to walk 1/3 – 2/3 of the timeAbility to sit 1/3 – 2/3 of the timeAbility to climb and balance 1/3 – 2/3 of the timeAbility to stoop, kneel, crouch and crawl 1/3 – 2/3 of the timeAbility to reach with hands & arms 1/3 – 2/3 of the timeAbility to smell, talk & hearAbility to use hands to type, handle & feelAbility to reach with hands and armsAbility to see at close and distance ranges and the ability to see colorMust be comfortable working in a high stress, fast paced environment with shifting prioritiesMust be willing to work outside normal business hours, including weekends, late nights, holidays, and on-call supportAbility to lift up to 50 pounds 1/3 of the time Compensation: Compensation for this role includes a base salary between $43.00/hr and $46.00/hr. This role is also eligible for an annual bonus and equity, based upon individual and company performance. Benefits Not only does CoreSite have a fun, team-focused work environment, but we also offer great benefits to all employees regularly scheduled to work more than 20 hours a week!First-day medical insurance through Cigna with generous premium cost coverageDental insurance through Delta DentalVision insurance through VSPTelemedicine through MDLive for CignaHealthcare and dependent care flexible spending account (FSA) plansHealth saving account (HSA) plans for employees participating in the High Deductible Health PlanLife, AD&D, short-term disability, and long-term disability insurance fully paid by the companyVoluntary coverage benefits for supplemental life, critical illness, accident, and hospital insuranceFirst-day eligibility for 401(k) savings plan through Fidelity, which includes an attractive matching company contribution with a 5% company matchDiscretionary annual bonus and equity incentive planEmployee stock purchase plan (ESPP) with a 15% discount16 days of paid time off (PTO), 11 paid company holidays, and additional floating holidaysAdditional paid time off for school events, elder care, volunteering, bereavement, jury duty, voting, parental leave, and disability leaveFree parking or a company contribution toward a public transit pass Additional PerksWellness Reimbursement Program: Yearly stipend of $500 for employees and $300 for dependents, up to $800 total for the familyWellness Incentive Program: Participate in various wellbeing activities to earn up to $450 per year in cash incentivesTechnology Stipend: $100 monthly stipendEducational Reimbursement Program: Work-related learning and development with reimbursement on qualifying degree programs, up to $5,250 per yearGiving Back: Charitable donation matches up to $5,000 per year and nominate organizations for Company Foundation grantsFinancial Management: Access to financial coaching, digital tools, and services to manage and pay student loan debt quickerPet Insurance: Keep your furry friends healthy and happyFamily Planning: Benefits and services related to fertility, pregnancy, menopause, adoption and surrogacyEmployee Assistance Program: 24x7 service to support family, work, money, health, legal and life challengesCounseling and Caregiving Programs: Including access to mental health services, licensed counselors, and caregiving tools including membership for finding careReferral Bonus: Receive a $3,000 cash bonus if referred candidate is hired and meets eligibility requirementsDiscounts: Discounts, cash back offers, and perks on thousands of brandsLinkedIn Learning Membership: Support your development when accessing LinkedIn’s online library of courses and videos Applicants must be currently authorized to work in the United States on a full-time basis. The employer will not sponsor applicants for work visas. Please note that all offers of employment are contingent upon the successful completion of a background check and, where permitted by law, a 4-panel drug test conducted after the offer letter is signed, which will screen for opiates, PCP, cocaine, and amphetamines. Thank you for your understanding and cooperation. Applicant Privacy Notice: CoreSite is committed to protecting the privacy and security of personal information submitted by applicants. The California Consumer Privacy Act (CCPA) requires us to provide you information about our personal information handling practices. As a result, we’re providing this Privacy Notice that describes how we collect, use, share, and update personal information from individuals who wish to be considered for employment with CoreSite. To read the Applicant Privacy Notice, please go to . Unauthorized reproduction or distribution of this job posting on external sites is prohibited without prior written consent from CoreSite. We are not responsible for any postings or offers not originating from our official channels or approved partners.

Job Description A drain technician inspects, cleans, and repairs drain and sewer systems in residential, commercial, and industrial properties. They diagnose drainage issues and resolve problems like clogs, leaks, and damage to ensure proper water flow and sanitation. Cirks Construction Inc. (CCI), dba KDC Construction is a leader in the construction industry with diverse individuals dedicated to our people, customers, projects, and community. We are maintaining a strong focus on building a culture that encourages our employees to grow personally and professionally. KDC is also a proud recipient of the Top Workplaces 2022, 2023, and 2024 presented by the Orange County Register. KDC offers a competitive salary/hourly range $20.00 to $25.00- while considering the candidate’s experience and a comprehensive benefits package for full-time employees: * Medical insurance * Dental HMO and PPO insurance * Vision insurance * Life/AD&D insurance * Flexible Spending Accounts – Unreimbursed Medical and Dependent Care * 401(k) retirement plan * Vacation and Sick Time * Holidays Apply if you: * Bring a cooperative spirit to your team and neighboring department. * Have an understanding that through your contributions, you aid in the overall Company’s success. * Pursue continuous efforts to see beyond current business modes and methods. * Embody an understanding that tenure with an organization is achievable as a committed team member. * Bring your whole self to work. Applying your knowledge, skills, and abilities ensures that every task you perform is performed at the highest level. Performance Expectations Striving to be the leader in construction and facilities services by exceeding customer expectations begins with each employee. Through the individual contributions of our employees, we can support our core values. For you to help us accomplish this goal, we ask for you to SMILE. Synergy – bring a cooperative spirit to your team and neighboring departments. Marketing – understanding that through your contributions, you aid in the overall success of our Company. Innovation – continuous efforts to see beyond current business modes and methods. Longevity – understanding that tenure with the organization is achievable as a committed team member. Excellence – bring your whole self to work. Applying your knowledge, skills, and abilities to ensure that every task you perform is performed at the highest level. Essential Job Functions 1. Perform drain cleaning services using tools such as augers, hydro-jetters, and camera inspection equipment for residential and commercial customers., 3. Inspect plumbing systems and identify potential issues or inefficiencies., 4. Provide accurate cost estimates and project timelines., 5. Diagnoses and troubleshoots drain and sewer issues, identifying the root cause of blockages, backups, and slow drains., 6. Perform preventative maintenance services on drainage systems to reduce the likelihood of future issues., 7. Communicate effectively with customers, explaining issues, presenting solutions, and providing upfront pricing for recommended services., 8. Maintain and care for company tools, equipment, and vehicles, ensuring they are in proper working condition., 9. Responsible for working safely, adhering to all aspects of our Health, Safety, and Environmental Program, and supporting all Company safety efforts., 10. Performs other duties as assigned. Education, Experience, and Skills 1. At least 6 months - 1 year of Drain Cleaning experience, 2. Strong analytical and problem-solving skills., 3. Demonstrates strong written and verbal communication skills., 4. Proficient with computers and familiar with the Microsoft Software Suite., 5. Demonstrates firm conflict resolution and negotiating skills., 6. Strong organizational skills., 7. Must be able to multitask, have strong attention to detail, and have excellent time management skills to manage multiple priorities while meeting deadlines., 8. Able to identify a need, remove barriers, and know how to make things happen., 9. Values diversity of ideas, opinions, and people. Has common sense and applied logic., 10. Must possess or obtain an appropriate state driver’s license before employment, a clean driving record, and reliable transportation.

Job DescriptionAbout the Job FULL-TIME/TEMPORARY (POSSIBILITY FOR PERMANENT) Foxconn Industrial Internet (Fii), is a world leading professional design and manufacturing service provider of communication network equipment, cloud service equipment, precision tools and industrial robots. FII provides customers with intelligent manufacturing services for new forms of electronic equipment products centered on the Industrial Internet platform. As a Test Technician your main responsibility will be to make sure products meet quality standards and function properly. In order to meet quality standards, you will monitor, assemble, improve and manipulate a product to ensure it is in no way defective. You will utilize our equipment and test procedures while testing our products. Collaboration with other Technicians and Engineers is needed to perform regular duties. QUALIFICATIONS: EDUCATION: A.A./Certificate/B.S. in Electrical Engineering, Engineering Technology, or related field EXPERIENCE: Minimum of 5 years of electronic testing, debugging, or tester setup. LANGUAGE: English proficiency required, Mandarin is a plus. SKILLS: • Reading comprehension for schematics and assembly drawing, • Knowledge of volt ohmmeters, digital metes, oscilloscopes, logis analyzers, microcomputers, calipers, and assorted electronic and microcomputer controlled test equipment, • High attention to detail, • Excellent communication skills, • Critical thinking, • Operation monitoring, • Active learning, • Equipment maintenance RESPONSIBILITIES:, • Perform the most problematic tasks associated with the test and debug trouble analysis and/or repair of test fixture for all test station., • Assist Test Engineer in setting up test area and methods., • Work from and interpret basic schematics, logic drawings, test procedures, prints, sketches or verbal instructions., • Write and/or assist Test Engineers in writing new test procedures., • Recommend new methods or changes in test methods or equipment of efficient and economic tester of system, sub-assemblies or modules., • Prepare verbal or written reports of tests and work performed., • Train manufacturing operator or technician how to operate all of the testers on the manufacturing floor. Shift Schedules: Day: 7:00AM - 3:30PM Swing: 3:15PM - 11:45PM Graveyard: 11:30 PM - 8:00AM Foxconn Assembly, LLC is an Equal Opportunity Employer (EOE). All qualified candidates will receive consideration without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, or marital status in accordance with applicable federal, state and local laws. Foxconn Assembly, LLC participates in E-Verify and will provide the federal government with your Form I- 9 information to confirm that you are authorized to work in the U.S. Powered by JazzHR aj7QFOhYRS

Job DescriptionCompany Description At Western Digital, our vision is to power global innovation and push the boundaries of technology to make what you thought was once impossible, possible. At our core, Western Digital is a company of problem solvers. People achieve extraordinary things given the right technology. For decades, we’ve been doing just that—our technology helped people put a man on the moon and capture the first-ever picture of a black hole. We offer an expansive portfolio of technologies, HDDs, and platforms for business, creative professionals, and consumers alike under our Western Digital®, WD®, and WD_BLACK™. We are a key partner to some of the largest and highest-growth organizations in the world. From enabling systems to make cities safer and more connected, to powering the data centers behind many of the world’s biggest companies and hyperscale cloud providers, to meeting the massive and ever-growing data storage needs of the AI era, Western Digital is fueling a brighter, smarter future. Today’s exceptional challenges require your unique skills. Together, we can build the future of data storage. Job Description ESSENTIAL DUTIES AND RESPONSIBILITIES: • Involve with media magnetic development ahead of production, and support engineering testing and assessment in development phase., • Responsible for setup new test and robotics equipment. This includes mechanical setup, software setup and electrical calibration., • Responsible for set up, troubleshoot, sustaining and maintenance all DET Media testers., • Provide feedback to engineers on equipment handling and performance for continuous feedback., • Work close with engineer to qualify new software and hardware., • Characterization of new test equipment., • Plan & execute experiments, summarize results. Qualifications REQUIRED: • Minimum of AA degree in science/engineering and/or mid-senior level technician years of experience in a related industrial/manufacturing field preferred., • Must have working experience with standard test equipment such as scopes, calibration equipment etc. Knowledge in electronic circuits will be a big plus., • Computer literacy and proficiency in Microsoft Office tools such as PowerPoint, Excel, and Word required., • Relevant Experience in magnetic head, media and/or disk drive., • Good coordination and working teamwork skills., • Self-motivated, work independently, good logical thinking and problem solving. Additional Information Western Digital is committed to providing equal opportunities to all applicants and employees and will not discriminate against any applicant or employee based on their race, color, ancestry, religion (including religious dress and grooming standards), sex (including pregnancy, childbirth or related medical conditions, breastfeeding or related medical conditions), gender (including a person’s gender identity, gender expression, and gender-related appearance and behavior, whether or not stereotypically associated with the person’s assigned sex at birth), age, national origin, sexual orientation, medical condition, marital status (including domestic partnership status), physical disability, mental disability, medical condition, genetic information, protected medical and family care leave, Civil Air Patrol status, military and veteran status, or other legally protected characteristics. We also prohibit harassment of any individual on any of the characteristics listed above. Our non-discrimination policy applies to all aspects of employment. We comply with the laws and regulations set forth in the "Know Your Rights: Workplace Discrimination is Illegal” poster. Our pay transparency policy is available here. Western Digital thrives on the power and potential of diversity. As a global company, we believe the most effective way to embrace the diversity of our customers and communities is to mirror it from within. We believe the fusion of various perspectives results in the best outcomes for our employees, our company, our customers, and the world around us. We are committed to an inclusive environment where every individual can thrive through a sense of belonging, respect and contribution. Western Digital is committed to offering opportunities to applicants with disabilities and ensuring all candidates can successfully navigate our careers website and our hiring process. Please contact us at to advise us of your accommodation request. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying. Based on our experience, we anticipate that the application deadline will be 05-01-2026 (3 months from posting), although we reserve the right to close the application process sooner if we hire an applicant for this position before the application deadline. If we are not able to hire someone from this role before the application deadline, we will update. #LI-BL1 Compensation & Benefits Details • An employee’s pay position within the salary range may be based on several factors including but not limited to (1) relevant education; qualifications; certifications; and experience; (2) skills, ability, knowledge of the job; (3) performance, contribution and results; (4) geographic location; (5) shift; (6) internal and external equity; and (7) business and organizational needs., • The salary range is what we believe to be the range of possible compensation for this role at the time of this posting. We may ultimately pay more or less than the posted range and this range is only applicable for jobs to be performed in California, Colorado, New York or remote jobs that can be performed in California, Colorado and New York. This range may be modified in the future., • If your position is non-exempt, you are eligible for overtime pay pursuant to company policy and applicable laws. You may also be eligible for shift differential pay, depending on the shift to which you are assigned. You will be eligible to be considered for bonuses under either WD’s Short Term Incentive Plan (“STI Plan”) or the Sales Incentive Plan (“SIP”) which provides incentive awards based on Company and individual performance, depending on your role and your performance. You may be eligible to participate in our annual Long-Term Incentive (LTI) program, which consists of restricted stock units (RSUs) or cash equivalents, pursuant to the terms of the LTI plan. Please note that not all roles are eligible to participate in the LTI program, and not all roles are eligible for equity under the LTI plan. RSU awards are also available to eligible new hires, subject to WD'S Standard Terms and Conditions for Restricted Stock Unit Awards. • We offer a comprehensive package of benefits including paid vacation time; paid sick leave; medical/dental/vision insurance; life, accident and disability insurance; tax-advantaged flexible spending and health savings accounts; employee assistance program; other voluntary benefit programs such as supplemental life and AD&D, legal plan, pet insurance, critical illness, accident and hospital indemnity; tuition reimbursement; transit; the Applause Program; employee stock purchase plan; and the WD Savings 401(k) Plan.

Job Description The Arcticom Group (“TAG”) is a U.S.-based network of commercial and industrial mechanical services companies that provide HVACR service, maintenance, and installation services throughout North America. TAG is committed to being an “employer of choice” and ensuring employees have a home where they can learn and grow. With competitive compensation and an attractive benefits package, TAG is an exciting place to work. TAG Refrigeration is seeking Refrigeration Service Technicians for commercial service work in and around the San Jose, CA area Role Summary: The Journeyman Refrigeration Service Technician performs commercial service, maintenance, and repair on refrigeration systems including walk-ins, self-contained units, single systems, and rack systems. This role supports grocery and retail locations, ensuring systems operate safely and efficiently. Roles and Responsibilities: • Diagnose, repair, and maintain commercial refrigeration systems (self-contained units, walk-ins, single systems, rack systems)., • Troubleshoot electrical and mechanical refrigeration components., • Perform preventative maintenance on HVAC and refrigeration equipment., • Complete minor plumbing repairs (walk-in drains, case drains, cooling towers, water-cooled condensers)., • Inspect refrigeration, electrical, and plumbing systems to identify service needs., • Communicate service updates with store managers and directors., • Provide repair estimates and recommend equipment replacement when appropriate., • Maintain van stock, tools, and required safety equipment. Skills and Qualifications: • 2-5 + years of HVAC/R experience, • Strong diagnostic and mechanical skills, • Professional communication abilities, • Attention to detail and strong decision-making skills, • Ability to participate in on-call rotation, • Universal EPA Certification, • Electrical license, • 2–3 years minimum of grocery refrigeration experience, • HVAC/R technical school or related certifications Benefits: • Competitive pay, • Medical, dental, and vision insurance options, • Retirement savings plan with company contributions (401(k) or equivalent), • Paid vacation, holidays, and sick time, • Year-round, steady work, • Opportunities for career growth advancement, • Supportive, team-based work environment

Job DescriptionAbout the Job FULL-TIME/TEMPORARY (POSSIBILITY FOR PERMANENT) Foxconn Industrial Internet (Fii), is a world leading professional design and manufacturing service provider of communication network equipment, cloud service equipment, precision tools and industrial robots. FII provides customers with intelligent manufacturing services for new forms of electronic equipment products centered on the Industrial Internet platform. As a Test Technician your main responsibility will be to make sure products meet quality standards and function properly. In order to meet quality standards, you will monitor, assemble, improve and manipulate a product to ensure it is in no way defective. You will utilize our equipment and test procedures while testing our products. Collaboration with other Technicians and Engineers is needed to perform regular duties. QUALIFICATIONS: EDUCATION: A.A./Certificate/B.S. in Electrical Engineering, Engineering Technology, or related field EXPERIENCE: Minimum of 5 years of electronic testing, debugging, or tester setup. LANGUAGE: English proficiency required, Mandarin is a plus. SKILLS: • Reading comprehension for schematics and assembly drawing, • Knowledge of volt ohmmeters, digital metes, oscilloscopes, logis analyzers, microcomputers, calipers, and assorted electronic and microcomputer controlled test equipment, • High attention to detail, • Excellent communication skills, • Critical thinking, • Operation monitoring, • Active learning, • Equipment maintenance RESPONSIBILITIES:, • Perform the most problematic tasks associated with the test and debug trouble analysis and/or repair of test fixture for all test station., • Assist Test Engineer in setting up test area and methods., • Work from and interpret basic schematics, logic drawings, test procedures, prints, sketches or verbal instructions., • Write and/or assist Test Engineers in writing new test procedures., • Recommend new methods or changes in test methods or equipment of efficient and economic tester of system, sub-assemblies or modules., • Prepare verbal or written reports of tests and work performed., • Train manufacturing operator or technician how to operate all of the testers on the manufacturing floor. Shift Schedules: Day: 7:00AM - 3:30PM Swing: 3:15PM - 11:45PM Graveyard: 11:30 PM - 8:00AM Foxconn Assembly, LLC is an Equal Opportunity Employer (EOE). All qualified candidates will receive consideration without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, or marital status in accordance with applicable federal, state and local laws. Foxconn Assembly, LLC participates in E-Verify and will provide the federal government with your Form I- 9 information to confirm that you are authorized to work in the U.S. Powered by JazzHR Ggq8AjvTUN

Job DescriptionDescription: Come join our team at FirstElement Fuel and be a part of impacting the world in positive ways! WHO WE ARE: FirstElement Fuel along with its True Zero brand is the leader in the deployment of retail hydrogen refueling stations. We are a California-based company established in 2013 to provide safe, reliable, retail fuel to customers of fuel cell electric vehicles. The True Zero retail hydrogen network is the largest in the world today and is critical to California global energy transformation. Our mission is to foster the widespread adoption of hydrogen vehicles and reduce the impact of driving on our planet. FirstElement Fuel is continuously growing the refueling infrastructure and we believe hydrogen will change the world in a positive way. WHAT WE ARE LOOKING FOR: FIELD SERVICE TECHNICIAN We have a great opportunity for a skilled Field Service Technician. The right candidate for this role will be a hands-on expert, who is confident with working independently to meet customer needs. The position requires high standards of safety performance while operating the company vehicle or performing maintenance at our sites. This role reports to and is supported by the Operations Manager. WHAT YOU’LL DO: -Conduct preventive & predictive maintenance methods as directed. -Test and maintain the pressure and leaks on gas lines. -Purge and remedy leaks on high pressure lines. -Clean any and all necessary tubing. -Maintain a clean environment at each site. -Handle hazardous liquid chemicals and dispose of them properly as needed. -Calibrate instrumentation. -Troubleshoot our True Zero brand gaseous and liquid hydrogen stations including compression, storage, and dispensing equipment. -General repair and maintenance. -Sample hydrogen gas for state regulations. -Perform required metrology testing. Work with/on: -Low and medium (24VDC, 110 VAC, 480 VAC) voltage equipment, including motors, relays, compressors and PLC’s. -LH2 systems, including pumps. -High-pressure hydrogen gas lines (up to 15,000 psi). -Hydrogen Compressors - replace oil, valves, heads etc. -Troubleshoot electrical systems, including 4-20mA system, pressure transducers, valves, electronic and air operated valves, control valves, and PLC logic Customer Interface: -Answer support service calls from customers. -Train customers on how to fuel 5k and 10k psi hydrogen vehicles. -Independently troubleshoot and remedy onsite equipment with possible customer observance. -Interact calmly and professionally with our customers as needs arise. -Document and maintain the tool and training records for optimal efficiency. -Oversee contractors to ensure all work is performed per customer and code specifications. -Assist company with various tasks to accomplish new or changing projects. -Utilize the FirstElement Computerized Maintenance Management System (CMMS) to document and perform inventory transfers and work documentation. -Collaborate and aid the Commissioning Team when needs arise. Requirements: DESIRED SKILLS/KNOWLEDGE: -Excellent interpersonal skills. -High School diploma or equivalency is preferred. -Previous experience with pneumatic, electrical, hydraulic, industrial gas equipment a plus. -Proficiency in the use of hand and hand power tools, commonly used with installation and maintenance tasks. -Ability to read and understand P&ID’s and electrical schematics. -Capability to repair and problem solve mechanical and electrical equipment. -Clean driving record – Technicians must pass the assigned Driver’s Course during the training period. -Willingness to be digitally savvy to perform projects and other day-to-day duties. -Candidate must be a champion for flexibility and change as key elements to supporting our customer needs successfully. SCHEDULE + BENEFITS: -Travel Time: Field Service Technicians are provided work orders at the start of their daily shift and will spend 100% of their time out in the field. -Technicians will work a 10 hour shift four days a week with overtime as needed. -Field Service Technicians will use a company-issued hydrogen fuel-cell vehicle. -Occasional availability during off-hours for emergency customer operations support and vacation coverage. -Excellent benefits, to include full premium coverage for Medical, Dental and Vision, 401(k) Plan (with 6% company match), Personal Time Off (PTO), and Floating Holidays. The base hourly rate for this full-time position is $31.50 (South) and $33.50 (North) + benefits to start. Our salary ranges are determined by role, level, and location. All new Field Service Technicians start at base rate, eligible for advancement to FST 1 after 3 months provided introductory training has been satisfactorily completed. Please note that the compensation details listed reflect the base salary only and do not include any bonus or benefits. FirstElement Fuel is an Equal Employment Opportunity employer and does not discriminate in recruiting, hiring, training or promoting, on the basis of race, ethnicity, color, creed, religion, sex, sexual orientation, gender, gender identity, genetic information, national origin, physical or mental disability, pregnancy, medical condition, age, U.S. military or protected veteran status or political affiliation or any other protected characteristic covered by applicable federal, state, or local law. We maintain a drug-free workplace and perform pre-employment substance abuse testing. We also perform employment background checks.

Job Description Field Service Apprentice Reports To: Service Director The Field Service Apprentice is responsible for learning the skills required to assist in the diagnosis, repair and calibration of complex cascade refrigeration and electrical systems on Weiss Technik environmental test chambers. During this time the Apprentice will work alongside production and other required departments to complete the required training through the production of Test Chambers. Once training requirements are completed you will have the opportunity to be independently deployed as a Field Service Technician and be assigned to a territory within the United States that will require travel up to 50% of the scheduled work time per year. The Field Service Apprentice will train between Weiss Technik North America's Cincinnati, OH facility and the corporate office located in Grand Rapids, MI, for a period of up to 12 months based on training achievements. Upon completion of this program , you will be provided with a certificate of completion specific to Weiss Technik North America, Inc. as this is an apprenticeship program designed and implemented by Weiss Technik North America, Inc. and not a state agency. Job Purpose/Authority Statement The Job Title listed empowers the Incumbent with the authority to execute all duties and responsibility listed below. In the event of a conflict of authority, the Incumbent shall elevate to direct supervisor for resolution. Duties and Responsibilities • Complete Career Path training program to assist in the diagnosis, repair and calibration of complex cascade refrigeration and electrical systems on Weiss Technik environmental test chambers. Installation and maintenance of environmental test chambers and usage of hand and power tools, refrigeration gauges and evacuators, • Successful completion of training checklist every 90 days and receive feedback on completion of training to establish training goals., • Maintain a clean and orderly work space., • Maintain and organize fully operation service vehicle., • Turn in job expenses weekly or bi-weekly fashion for job costing purposes and have company related credit cards paid in a timely fashion and without penalty fees., • Keep, properly maintain, and turn in calibration equipment at required intervals., • Learn how to maintain high level of focus on customer satisfaction., • Assist with installs and services those who extensive knowledge of refrigeration, electrical, controllers, hydraulics, calibrators, pneumatics. Provides telephone technical assistance as required., • Travels throughout North America and Worldwide when required., • Assist with training sessions at Service Seminars or at customer facilities., • Interacts with engineering and manufacturing Dept regarding in-house and field equipment failures., • Documents field trips and properly records paperwork., • Capable of reading and understanding test reports and prioritizing workloads. Must be capable of driving a forklift. Knowledge of electrical safety policies, including lock-out/tag-out, and EPA refrigeration certification., • Train to have a working knowledge of CRM database and Visual Manufacturing to review and enter data., • Train to have a working knowledge of computer systems, e.g. Industrial Engineering drives, latest version of Windows OS, MS Outlook, and Word, Excel., • Train how to operate vacuum pumps, PID controls, and work with low voltages. Qualifications • Employee must be able to perform simple math functions, • Have the ability to accurately use measuring instruments, • Be willing to provide basic tools required for the position, • Be willing to train as required and possess the ability to understand shop pick lists and travel related to job and accurately report time to job assignments., • Must be capable of reading and understanding SOP’s and FDA/GMP’s and willing to work in an office environment or travel up to 2 weeks per month as required., • High School Diploma/GED or comparable experience required., • Must be able to follow direction, • Work in a fast paced environment, • Work cohesively with others, and learn to communicate effectively with customers., • Training expected to last up to two years.

Job DescriptionJob Title: Manufacturing Engineering TechnicianJob Description The Manufacturing Engineering Technician performs complex or specialized technical assignments, typically project-based, requiring independent work. This role involves using considerable judgment, a high degree of initiative, and creative approaches in troubleshooting while adapting to rapidly shifting priorities in a fast-paced environment. The technician monitors and improves manufacturing processes and recommends continuous improvement strategies for Manufacturing Engineering. Responsibilities • Perform complex or specialized technical assignments related to manufacturing projects., • Work independently to troubleshoot and solve technical issues., • Monitor and improve manufacturing processes., • Collaborate with engineers on equipment repairs and builds., • Make recommendations for continuous improvement in work processes., • Perform simple assembly, light equipment repair, and maintenance tasks such as swapping out fans or belts and conducting cleaning operations on dies.Essential Skills, • Proficiency in troubleshooting, assembly, and mechanical equipment maintenance., • Ability to work effectively with hands and demonstrate mechanical acumen., • Understanding and experience with 5S, Lean, and waste reduction methodologies.Additional Skills & Qualifications, • Willingness to learn and adapt to new challenges. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Santa Clara,CA. Application Deadline This position is anticipated to close on Apr 9, 2026. Diversity, Equity & Inclusion At Actalent, diversity and inclusion are a bridge towards the equity and success of our people. DE&I is embedded into our culture through: • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job Description Position Overview The Manufacturing Technician performs complex or specialized technical assignments, often project-based, requiring the ability to work independently. This role may involve designing, developing, maintaining or modifying manufacturing equipment, materials, systems and products. The technician uses sound judgment, a high degree of initiative, creativity in solving, and must adapt to rapidly shifting priorities in a fast-paced environment. The Manufacturing Technician sets up and maintains equipment to required standards and makes recommendations for continuous improvement of manufacturing methods in partnership with Manufacturing Engineering. Essential Job Functions • Supports development and manufacturing teams by testing specific aspects of products, processes, or equipment to meet defined requirements and timelines., • Troubleshoots and resolves equipment issues requiring hands-on experience and technical interpretation of procedures and practices., • Masters the processes and procedures used to build company products, and is qualified to train new employees (including assemblers, technicians, engineers)., • Demonstrates ingenuity, creativity and a high degree of independent action and initiative., • Communicates effectively with team members and multi-functional partners to ensure the highest quality products, processes, or equipment to meet identified needs., • Supplies ideas and solutions to improve processes and equipment., • Analyzes data to identify trends and isolate cause-effect relationships; reports findings and presents progress and plans to engineers and/or management., • Provides support data for Engineers during qualification and validation studies., • Plans and organizes project assignments of substantial variety and complexity; initiates or maintains work schedules and project milestones; establishes priorities., • Facilitates meetings and training sessions on procedures and processes for all levels of technical personnel, including engineers., • Must be available to support production on Saturdays, as needed., • High School Diploma required with a minimum of 1 year experience as a manufacturing technician (or relevant experience) in the medical device industry or with 3 years’ other relevant hands on medical device experience., • Knowledge of and compliance with applicable Quality System requirements such as QSRs, FDA, ISO, MDD and other relevant regulations., • Understanding of and experience with 5S, Lean, and waste reduction in manufacturing., • Experience in equipment preventive maintenance and/or calibration is a plus., • Knowledge of PLC’s, pneumatic systems, and electrical systems., • Experience in manufacturing processes, systems, and process/product development., • Strong written and verbal communication skills with the ability to communicate effectively at all levels., • Ability to work in a fast-paced environment while managing multiple priorities., • Proven ability to work both independently and collaboratively, showing flexibility to adapt to changing requirements. Must be able to sit for prolonged periods (more than 2 consecutive hours in an 8 hour workday), • May be required to lift objects up to 25lbs or more. This is a Contract position based out of Santa Clara, CA. Pay and Benefits The pay range for this position is $35.00 - $45.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job DescriptionFST Technical Services is your global partner in the Semiconductor and Microelectronics industry! Come join a fantastic team in an exciting, fast paced, and ever-growing industry! FST is seeking an experienced Electrical Technician in Santa Clara, CA. Role: Electrical Technician Schedule: Day shift, 12 hours shift, compressed work week schedule Job Responsibilities: • Perform repairs, preventive and predictive maintenance of all the electrical distribution systems., • Conduct daily rounds and readings., • Work from drawings, schematics, and other electrical documentation., • Collaborate with other discipline technicians to support mechanical and process equipment., • Use and update electrical procedures for electrical maintenance and operation. Experience / Requirements: • Field experience within all aspects of electrical maintenance and troubleshooting of facilities equipment and systems., • Experience in a sustaining environment such as maintenance requirements for industrial electrical facility systems, such as electrical distribution (up to 15kv), switchgear, generators, and variable frequency drives., • Experience with electrical metering and testing equipment including multi-meter, ground fault detector, VLF, and IR camera, reading single-line electrical diagrams, schematics, and blueprints., • Experience covered by National Electrical Code (NEC70), Recommended Practice for Electrical Equipment Maintenance (NFPA 70B), and Standard for Electrical Safety in the Workplace (NFPA 70E)., • Lift 30 lbs 3 times a day on average., • Preferred experience in Semiconductor or Pharmaceutical industries.“FST Technical does not offer employment-based visa sponsorship for this position. Applicants must be legally authorized to work in the United States without the need for employer sponsorship now or in the future.” Powered by JazzHR Qg6nJCLM7z

Job Description Antora builds and deploys thermal energy storage to power always-on industrial operations and data centers with low-cost energy. Factory-built in California, Antora's thermal batteries deliver reliable and cost-effective heat and power for industrial loads of any size. Antora is electrifying global industry while supporting U.S. manufacturing jobs, lowering costs for energy consumers, and enhancing the competitiveness of American industry. We are growing our company with people who put team and mission first, value connection through laughter and joy, and build with humility and openness. We are committed to continue building a diverse, passionate, and creative team dedicated to a future where every industrial facility, everywhere on earth, is powered by abundant, clean, low-cost energy. About The Role Antora Energy is seeking a Materials R&D Lab Technician to join our materials development team at our headquarters near San Jose, CA. In this hands-on role, you will partner directly with engineers to execute high-temperature experiments using bench-top furnaces and supporting lab equipment — work that is central to developing the novel materials inside Antora's thermal energy storage systems. You will be responsible for setting up and running tests, operating instrumentation and data acquisition systems, and producing clear, thorough documentation of every experiment. The ideal candidate thrives in a fast-paced hardware R&D environment, is meticulous about data quality, and takes pride in keeping a lab running smoothly. What You'll Do • Experiment Execution: Set up, operate, and monitor benchtop furnaces and other high-temperature lab equipment according to test plans and procedures defined by engineers. Manage sample preparation, fixturing, and loading/unloading of test articles, • Instrumentation & data collection: Install, configure, and operate DAQ systems, thermocouples, and other sensors to capture temperature profiles, environmental conditions, and material response data during experiments., • Documentation & reporting: Maintain detailed lab notebooks and digital test records for every experiment. Compile data summaries, charts, and observations into clear reports for the engineering team., • Equipment maintenance: Perform routine calibration, preventative maintenance, and minor repairs on furnaces, instrumentation, and lab tools. Flag equipment issues early and coordinate with vendors or internal teams for resolution., • Lab operations: Keep the lab organized, stocked, and compliant with safety protocols. Track consumables and supplies. Support sample inventory and traceability., • Safety: Follow all EH&S procedures for high-temperature work, chemical handling, and general lab safety. Participate in safety reviews and report hazards or near-misses promptly., • Continuous improvement: Suggest and implement improvements to test setups, fixtures, data collection workflows, and lab organization. Contribute to the development of standard operating procedures., • Collaboration: Work closely with materials development engineers to understand test objectives, troubleshoot experiments in real time, and adapt plans based on emerging results.What We're Looking For, • Associate's degree or higher in a technical field (e.g., Materials Science, Mechanical Engineering Technology, Physics, Chemistry, or related discipline), or equivalent hands-on experience., • 3+ years of experience working in a hardware R&D lab, test lab, or similar hands-on technical environment., • Direct experience operating furnaces, kilns, ovens, or other high-temperature equipment., • Familiarity with data acquisition systems (DAQs), thermocouples, and common lab instrumentation., • Strong documentation habits — comfortable maintaining lab notebooks, writing test reports, and organizing data., • Proficiency with spreadsheets, databases, and AI for basic data organization, plotting, and analysis., • Detail-oriented, safety-conscious, and comfortable working independently once given clear direction., • Ability to lift and handle lab samples and equipment (up to ~50 lbs)Bonus Qualifications, • Experience with high-temperature materials such as carbon, graphite, ceramics, or refractory metals., • Familiarity with CAD tools for interpreting engineering drawings and fixture designs., • Experience with PLCs, Python, AI, or other tools for data acquisition or analysis., • Exposure to Design of Experiments (DOE) methodology., • Prior experience in a startup or fast-moving R&D environment. Salary Range: $36-$43/hourly USD Salary Basis: Please note that the salary range listed above reflects Antora Energy's estimated pay for this position. The actual salary offered will be within the posted range and determined based on several factors including but not limited to a candidate's experiences, credentials and expertise, as they pertain to the position's requirements. In addition to a competitive base salary, Antora Energy's Total Rewards program includes equity compensation in the form of stock options, a premium health benefits package with life and disability insurance, a 401K plan with employer contributions, flexible spending accounts, and an industry leading paid-time-off policy that features flexible and inclusive holiday observance, as well as paid volunteer time off. When it comes to stopping climate change, we need everyone. We believe that having a diversity of backgrounds and experiences strengthens all of us, and we strive to create an environment where every one of us is empowered to create meaningful change.

Job DescriptionDescription: Vortex Doors, America’s highest quality and most customer-centric commercial and industrial door repair company, is seeking Service Technicians to join our team of door industry professionals. We are considering applicants with door experience or entry level with no experience! As an Service Technician, you will play a crucial role in installing, repairing, and maintaining various types of doors and related hardware, ensuring they function efficiently and safely. Your attention to detail, problem-solving abilities, strong mechanical aptitude, and commitment to quality workmanship will be essential in meeting our customers' needs. Key Responsibilities: • Door Installation: Install and repair a variety of commercial doors using appropriate tools and equipment., • Repairs and Maintenance: Diagnose and conduct routine repair door-related issues, such as broken springs, hinges, locks, and electrical components., • Hardware Installation: Install and configure door hardware, such as locks, handles, closers, and access control systems., • Safety Compliance: Ensure that all installed doors meet safety and building code regulations and standards., • Customer Service: Provide excellent customer service by addressing client inquiries, explaining repair processes, and offering solutions to door-related problems., • Documentation: Maintain accurate records of service visits, repairs, and installations, and provide reports as required., • Troubleshooting: Diagnose, identify, and resolve technical issues with doors efficiently. Communicate with customers offering cost-effective solutions., • Industry-Best Training., • Commercial/Retail door opening, hardware, and storefront glazing training., • Manual operated doors and dock equipment training for Industrial openings., • Hollow metal door, frame, and hardware training., • Strong Safety Culture., • Positive Work Environment., • Recognitions and Rewards., • Comprehensive health benefits, 401K match, 8 company paid holidays, and PTO., • Full-time shifts are available between Vortex business hours of 7:00 AM - 5:30 PM, Monday through Friday with potential overtime and on-call hours. Requirements: • High school diploma or equivalent., • 2+ years’ experience in the commercial door service industry is a plus., • Knowledge of various door types, brands, and hardware is a plus., • Ability to use hand and power tools effectively., • Excellent problem-solving and troubleshooting skills., • Proficiency in performing mathematical calculations involving fractions and reading a tape measure accurately for precise measurements and installations., • Good communication and customer service skills., • Attention to detail and a commitment to quality workmanship., • Knowledge of safety regulations and adherence to safety protocols., • Valid driver's license with a clean driving record, • Physical ability to lift up to 50 pounds., • Physical ability to continuously lift and bend, climb ladders up to 20’ in height, work on knees for extended periods of time and proficient operating power tools., • Additional ongoing training provided.

Additionally, the Electrician operates and maintains low-voltage systems, including fire alarms and access control systems, and utilizes a computerized maintenance management system for scheduling and documenting preventive maintenance. Skill in documenting work in digital maintenance systems; abili

Field Service Technician III Copiers & Printers (Digital Imaging Equipment). Are you a hands-on technician who enjoys troubleshooting, fixing, and maintaining commercial printing and imaging equipment? Do you thrive in the field, solving problems, and supporting customers with high service standard

Reporting to the Executive Director of Moss Landing Marine Laboratories and under the general supervision of the Facilities Supervisor, the Facilities Maintenance Mechanic performs a wide range of skilled maintenance, repair, and construction work. Four (4) years of increasingly responsible experien

Energy - Solar & Storage [Field Technician / Maintenance Mechanic] As a Field Service Technician at Tesla, Inc. Perform required preventive maintenance activities on inverters to maintain warranty coverage; Respond to corrective maintenance cases on solar PV, energy storage systems, vehicle charging

UFC GYM - - Responsibilities: Conducts a daily safety walk-through of the Facility to identify and address any immediate safety concerns.Works on special projects as directed by the General Manager and Operations Manager.Maintains the history file on all equipment.Procure repair parts, materials, t

OPPORTUNITY: MAINTENANCE TECHNICIAN II - SUNNYVALE, CA. The company manages a combined portfolio of approximately 25 million square feet of office and industrial space and 30,000 apartment units. Sares Regis Group is seeking an experienced maintenance professional for our beautiful 479-unit communit