Industrial maintenance technician jobs in Austin, TexasCreate job alerts

Job Description Company: Energy Logix Location: Austin, TX Reports To: Service Manager Job Type: Full-Time Pay Rate: $28-$35 per hour, depending on experience Travel: Dispatched from home; local and regional travel (typically within Austin and surrounding areas, occasionally as far as San Antonio) Perks: Company-provided vehicle for work-related travel, opportunity for overtime ABOUT ENERGY LOGIX Energy Logix has been delivering innovative, energy-efficient HVAC solutions for over 10 years. We specialize in optimizing building performance through commercial service, system upgrades, and preventative maintenance. As a trusted and growing name in the HVAC industry, we value experienced technicians who take pride in their work and are ready to grow with a company that truly supports its field team through KPI-driven operations and strategy. ROLE SNAPSHOT We are seeking a skilled and motivated Commercial HVAC Service Technician (Level II or III) based in Austin, TX. In this role, you'll be dispatched from your home to commercial sites across Austin and the surrounding region, including occasional travel to nearby cities such as San Antonio. You'll troubleshoot and service a variety of commercial HVAC systems while enjoying the freedom of working independently with full support from our team. KEY RESPONSIBILITIES • Responding to scheduled and emergency service calls for commercial and industrial HVAC systems • Performing preventative maintenance, inspections, site surveys, and diagnostics, • Troubleshooting and repairing systems such as:, • Split systems, • Rooftop packaged units, • Chillers, • Ancillary systems (pumps, cooling towers, etc.), • Performing start-up, commissioning, and system modifications, • Accurately documenting all work performed, • Providing excellent customer service and communication, • Maintaining company safety standards while on-site MUST HAVES • High School Diploma, GED, or equivalent, • Minimum 3+ years of commercial HVAC service experience, • EPA Certification, • Familiarity with smartphones, tablets, and Microsoft Office, • Valid driver's license with a clean driving record, • Ability to work independently and be on-call as needed, • Willingness to travel within the region, including occasional jobs outside of Austin, • Chiller experience is a plus WHAT'S IN IT FOR YOU • Competitive hourly pay: $28-$35/hour, based on experience, • Company-provided vehicle for work-related travel, • Dispatched from home (primarily) - no daily office reporting, • Overtime opportunities, • Tools, uniforms, and PPE provided, • Comprehensive benefits package, including:, • Medical, dental, and vision insurance, • Paid time off (PTO), • 401(k) with company match PHYSICAL REQUIREMENTS This is a hands-on field position that requires: • Lifting up to 10 lbs regularly and up to 40 lbs frequently (equipment up to 50 lbs), • Climbing ladders (350 lb weight limit) and accessing rooftops up to 50+ feet, • Working in confined spaces (as small as 30" vertical x 45" horizontal), • Standing on concrete surfaces for extended periods (up to 4 hours), • Regular twisting, bending, kneeling, and overhead reaching, • Using personal protective equipment (helmets, goggles, harnesses, safety boots), • Working in variable outdoor and mechanical environments, including noise, weather, and electrical systems

Join Our Team! Sunbelt Rentals strives to be the customer's first choice in the equipment rental industry. From pumps to scaffolding to general construction tools, we aim to be the only call needed to outfit a job site with the proper equipment. Not only do we offer a vast fleet that ranks among the best in the industry, we pair it all with a friendly and knowledgeable staff. Our employees are our greatest asset, and although we present a comprehensive equipment offering, our expertise and service are what truly distinguish us from the competition. We pride ourselves on investing in our workforce and offer competitive benefits, as well as extensive on-the-job training for all eligible employees. As a highly successful national company, we are constantly looking for talented individuals to support our growth. If you are interested in pursuing a rewardingcareer, we invite you to review our opportunities! Job Description Summary Join the Powerhouse of Industrial Maintenance Are you a mechanical problem-solver who thrives on complex systems? At Sunbelt Rentals, we don't just rent Scaffold equipment; we provide the backbone for major construction and industrial projects across North America. We are looking for a Specialized Scaffold -Hoist Motor Technician (Hoist & Swing Stage) to join our Austin team. This isn't your average "grease monkey" job. You will become a master of safety-critical systems, responsible for the repair, reconditioning, and annual certification of high-stakes Scaffold swing stage hoist motors. If you have a background in industrial maintenance, lift repair, or complex electrical motors, this is your opportunity to build a long-term career track with the fastest-growing rental business in the industry. Why You'll Love Working Here: • Career Velocity: We prioritize internal promotion and skill development to help you move from technician to lead or management roles., • Expert Team: Work alongside a dedicated group of professionals who value integrity and safety-consciousness., • Stability & Impact: Your work ensures the safety of workers on high-rise projects-every inspection you perform matters. DUTIES & RESPONSIBILITIES: • Service equipment as required to keep in proper and safe working condition., • Performs safety inspections on equipment., • Meets all company, governmental and equipment related safety requirements., • Primary Focus: Experience in troubleshooting and repairing 3-phase electrical motors and industrial hoist systems., • Safety Expertise: Ability to conduct rigorous annual safety inspections to meet company and governmental requirements., • Niche Skillset: 1+ years of experience with Scaffold Hoist or Swing Stage equipment is highly preferred. The above description covers the principal duties and responsibilities of the job. The description shall not, however, be construed as a complete listing of all miscellaneous, incidental or similar duties which may be required from day to day. EOE. The physical demands of this role require bending, squatting, crouching, reaching, lifting 50 pounds or more, and working indoors/outdoors when required by the job. The above description is not a complete listing of all miscellaneous, incidental or similar duties which may be required from day to day. Reasonable accommodations may be made to comply with applicable laws. Sunbelt Rentals is an Equal Opportunity Employer - Minority/Female/Disabled/Veteran and any other protected class. Base Pay Range: $20.89 - 30.02 Starting rate of pay may vary based on factors including, but not limited to, position offered, location, education, training, and/or experience. Please visit for more information on our benefits and to join our Talent Network. Sunbelt also provides a comprehensive benefits package to its full-time employees. This package includes: * Health, Dental and Vision plans * 401(k) Match * Volunteer time off * Short-term and long-term disability * Accident, Life and Travel insurance, as well as flexible spending * Tuition Reimbursement Options * Employee Assistance Program (EAP) * Length of Service Awards You will become eligible for benefits on the first of the month following 30 days from your start date. Sunbelt offers team members the following paid time off from work, subject to Sunbelt's policies (unless specified in a collective bargaining agreement): * 12-25 vacation days depending on years of service * 5 sick days * 6 holidays * 2 half day holidays * 2 floating holidays * 1 inclusion day * 1 volunteer day Gear up for an exciting career! Sunbelt Rentals supports service members. Veterans encouraged to apply.

Job Description Service Technician – Commercial HVAC Reports to: Area Service Manager FLSA Status: Non-Exempt The Company HVAC RNTL specializes in renting out various HVAC equipment to help buildings get their systems back up and running. The company, founded in 2017, provides a wide range of equipment including spot coolers, air filtration systems, chillers, and generators. We serve various industries, including industrial, education, government, healthcare, hospitality, and general contractors. Our overall mission is simple: we want to create value and make a difference every day in our journey to be the best HVAC sales and service organization in North America. We believe we can succeed in that mission by being the BEST provider for our clients, the BEST partner for manufacturers, the BEST company for our employees, and the BEST investment for our current and future shareholders. The Opportunity We are seeking an experienced Commercial HVAC Service Technicians in the Austin, TX area. This position will be responsible for performing electrical and mechanical inspection, start-up maintenance on the equipment we sell. This is a full-time opportunity for an energetic go-getter. An ideal candidate will be customer service oriented and work well with others. Responsibilities • Performs electrical and mechanical inspection and maintenance on equipment to ensure peak performance., • Perform specific preventative maintenance including belt adjustments, oiling, greasing and cleaning of equipment., • Uses experience and technical skills with preventive maintenance and system operations to determine service requirements., • Ability to interpret engineering drawings in reference to layout, location and operation of the system(s), • Represents the company in a positive manner to other trades, contractors and owners., • Advises owner/representative of preventive maintenance inspections performed and corrective actions to be taken., • Suggest additional services that are beneficial to customer., • Works in a team-based environment to share information and workload while ensuring customer satisfaction., • Submits required paperwork to Service Coordinator in a timely manner., • Must work in a safe manner on a daily basis and ensure that all safety measures are taken at all times., • Performs other duties as assigned., • High School Diploma or equivalent, • Must have valid driver’s license with good driving record., • Must have current HVAC certification and OSHA 10 Training plus 1-5 years’ experience working as a Service Helper or Service Technician in a residential or commercial environment., • Operating knowledge of Microsoft office software and working proficiency with handheld computer (i.e. Smartphone, iPad), • Electrical knowledge required and EPA Certification Preferred (i.e. HVAC Journeyman, Boiler Operator, Gas Installer, etc.), • Ability to work in diverse conditions including but not limited to mechanical equipment rooms with exposure to noisy operating equipment, exposure to extreme weather conditions, risk of electrical shock (high voltage), climbing/working at elevated heights, etc., • Must be able to climb, crawl, stoop, kneel and must regularly lift and/or move up to 50 pounds, frequently lift and/or move up to 75 pounds. Language Skills Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Mathematical Skills Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret graphs. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Mental stamina for problem solving and prioritizing multiple tasks. Environmental Requirements Will be required to work in a field environment, multiple customer sites on a daily basis. Physical Demands While performing the duties of this job, the employee is regularly required to use hands to operate computer keyboard reach with hands and arms. The employee frequently is required to stand, walk, and sit. The employee is continually required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 50 pounds, frequently lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. NOTE: This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization. HVAC RNTL is an Equal Opportunity Employer Company DescriptionHVAC RNTL specializes in renting out various HVAC equipment to help buildings get their systems back up and running. The company, founded in 2017, provides a wide range of equipment including spot coolers, air filtration systems, chillers, and generators. We serve various industries, including industrial, education, government, healthcare, hospitality, and general contractors.HVAC RNTL specializes in renting out various HVAC equipment to help buildings get their systems back up and running. The company, founded in 2017, provides a wide range of equipment including spot coolers, air filtration systems, chillers, and generators. We serve various industries, including industrial, education, government, healthcare, hospitality, and general contractors.

Position Summary 5F is seeking a highly motivated, organized HVAC Service Technician for our service department. This Central Texas-based position will be part of an exciting, fast-moving business, where everyone on the team needs to be entrepreneurial, wear many hats and work effectively in a highly collaborative environment. You are the right person for this job if you have a strong end-user focus and a passion for producing high-quality work. You must demonstrate the ability to efficiently plan and prioritize all deliverables and resources across multiple projects. You will work closely with other stakeholders to make decisions and find solutions quickly and with confidence. Duties and Responsibilities • Perform maintenance and repair tasks for all types of chiller systems, air and water cooled, for both commercial and industrial., • Positively respond to heavy workload of service calls in a professional manner., • Ensures customers’ questions/concerns have been addressed before leaving the work site., • Repair, troubleshoot and maintain packaged and split systems., • Troubleshoot, diagnose and repairs various makes and models of equipment., • Perform preventative maintenance and repair of industrial and commercial HVAC equipment primarily chillers but could include split systems, packaged rooftop units, cooling towers and pumps, as needed., • Demonstrate ability to determine priorities based on call schedule, respond to inadvertent interruptions, carry proper tools and materials, and schedule vehicle maintenance., • Knowledge of methods, tools, and equipment used in the repair of air and water cooled, heating and air condition equipment in commercial and industrial buildings., • Knowledge of electrical and control systems, • Keep supervisor and manager informed of new developments, changes, or customer complaints., • Perform daily work duties associated with the trade with little to no supervision in the field., • Participate in on call rotation, volunteer to take on new challenges and work assignments., • Be available to work nights or weekends, on a rotating basis, to service emergency needs of our customers., • Excellent customer service skills with desire to exceed customer expectations., • Maintain accurate and complete invoices, paperwork and other procedures to company standards., • Keep technical knowledge current regarding equipment and concepts. Participate in company provided training opportunities., • Minium 5years commercial HVAC Service Experience, • Split System & Package unit understanding and ability to repair up to 25tons (Ability to trouble shoot & repair larger equipment a bonus), • Trouble shooting knowledge., • Ability to complete Preventive maintenance & equipment inspections., • Ability to read and understand wiring schematics., • Self-motivated & ability to work alone., • Ability to complete field invoices and communicate w/ customers., • EPA Universal certified., • Good driving record required., • On call required. Desired/Preferred Education & Qualifications Other Details Union Benefits including: • Pay scale is negotiable for the right candidate., • Fully Paid Health insurance for employee and family., • Pension plan., • 2weeks paid vacation per year., • Paid Holidays. Company Overview 5F Mechanical Group Inc. is a Central Texas based mechanical and process construction firm specializing in the fabrication/installation and maintenance of a variety of process/pressure/high-purity piping systems, sanitary plumbing (domestic water/waste) and HVAC/exhaust ventilation systems. 5F also is a regional leader in the manufacturing of galvanized and stainless steel sheetmetal and ductwork. While our Commercial/Industrial capabilities are well-diversified, 5F excels greatly in markets such as Healthcare, Laboratory, Pharmaceutical, Government Facilities, Distillery/Brewery Facilities, Primary/Higher Education as well as Data Centers and Semiconductor/Microelectronic applications. It is our mission to provide top-tier quality and performance along with creative and innovative solutions while creating and cultivating lasting relationships with our clients and customers. Nothing is more important to 5F than making sure the needs of our customers are met or exceeded. Primary Location: Elgin, Texas Job: Management Employee Status: Non-Union / Exempt Schedule: Full-time

Job Description Adecco is hiring for a Maintenance Technician – Full Job Description (AM Shift) Location: Austin, TX Employment Type: Full‑time, onsite Shift: AM (6:00 AM–6:00 PM) AM Rotation Schedule: * Week 1: Sunday, Monday, Tuesday, every other Wednesday * Week 2: Every other Wednesday, Thursday, Friday, Saturday Overview Full‑time Maintenance Technician positions are available in a fast‑paced, technology‑driven production environment. This role helps ensure equipment stays reliable, safe, and ready for daily operations. The technician performs preventive and corrective maintenance, troubleshoots issues, documents all work, and partners with production teams to maintain consistent workflow. Key Responsibilities * Perform preventive and corrective maintenance on production equipment and support systems * Troubleshoot mechanical, electrical, pneumatic, and basic software issues * Use multimeters, thermal tools, and diagnostic equipment to identify root causes * Read and interpret electrical schematics, mechanical diagrams, and pneumatic layouts * Assist with installation, setup, calibration, and testing of new equipment * Navigate PLCs and HMIs at a basic level to read fault codes and support troubleshooting * Inspect and repair components such as motors, belts, bearings, sensors, and mechanical assemblies * Monitor equipment performance and identify improvement opportunities * Document maintenance activities, PMs, inspections, and parts usage in logs or software systems * Follow all safety procedures, including proper Lockout/Tagout and equipment safeguards * Maintain a clean, organized workspace and follow proper tool‑control standards * Collaborate with production staff to minimize downtime and support equipment reliability Qualifications * Experience maintaining mechanical and electrical systems in a production or industrial environment * Ability to read electrical schematics, wiring diagrams, and technical documentation * Familiarity with pneumatic systems—valves, cylinders, regulators, air lines * Basic understanding of PLCs and HMIs (reading fault codes and navigating screens; no programming required) * Strong computer skills, including Microsoft Word, Excel, and maintenance or CMMS software * Ability to follow written procedures, maintenance instructions, and safety guidelines * Skilled in documenting work accurately in logs or maintenance systems * Comfortable using multimeters, hand tools, and power tools * Strong attention to detail, reliability, and willingness to learn * Comfortable working 12‑hour shifts and supporting production teams * English proficiency required * Must be local to Austin or able to commute Preferred (Nice to Have) * Light welding, fabrication, or metal‑working experience * Experience improving preventive maintenance processes * Knowledge of 24V control systems, sensors, relays, and basic wiring repairs Pay Details: $21.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job DescriptionWho we are and what we are looking for: We are a family of entrepreneurs. We are looking for an experienced industrial maintenance technician to join our team. If you are a dependable, hardworking individual with excellent work habits, demonstrated ability to minimize downtime of all equipment, and the skills to operate our cold storage facility at its maximum efficiency, we encourage you to apply for this exciting opportunity. Responsibilities: ● Ensure operation of machinery and mechanical equipment by completing preventive maintenance on facility equipment, such as racking systems following diagrams, sketches, operations manuals, manufacturer’s instructions, and engineering specifications; troubleshooting malfunctions. ● Locate source of problems by observing mechanical devices in operation ● Responsible for the care and upkeep of the building, racking systems, and refrigeration systems (as qualified). ● Identify current and future maintenance requirements by establishing rapport with management and personnel ● Resolve maintenance problems by conferring with management. ● Protect employees and visitors by maintaining a safe and clean working environment. ● Participate in staff and/or customer meetings as needed. ● Initiate action to prevent the occurrence of any non-conformities relating to product, process, and quality systems. ● Identify and record any issues relating to product, processes and/or quality. ● Initiate, recommend, or provide solutions through appropriate channels. ● Verify the implementation of solutions. ● Follow posted security procedures at all times while in the building. ● Participate in Safety and Educational Training. ● Must be willing to become certified in Lock-Out/Tag Out, Fall Protection and Confined Space Entry ● All other related duties as assigned Requirements Qualifications: ● 3-years years of industrial maintenance experience with demonstrated experience troubleshooting and repairing automated equipment required ● 3-5 years of previous warehouse maintenance strongly preferred, but not required ● Knowledge of general hand and power tools ● Previous residential maintenance experience ● Maintenance technician positions will require specific qualifications to be met in order to compete for these position ● Knowledge and experience in Safety and OSHA desired. Must be a safe worker. ● Background in preventative maintenance Physical Requirements: The physical demands described below are representative of those required of an individual performing the essential duties of this position. Reasonable accommodations may be made to enable qualified individuals with disabilities. ● Bend and lift up to 50 lbs. on a regular basis ● Lift up to 70lbs with assistance on an occasional basis ● Stand and walk for extended periods of time ● Use hands to handle objects, tools, or controls ● Be able to see, speak and hear for safety and productivity ● Use scanners, tablets, radio, phones, and other warehouse machinery ● Ability to lift overhead ● Work in an atmosphere range of + 50 to - 30 degrees F with a moderate noise level Other requirements: ● Ability to work overtime with little or no notice is an essential part of this position due to demand ● Drive a registered motor vehicle to satisfy daily requirements ● Personal interaction and communication required to and from other people is extremely high ● Good arithmetic and reading skills ● Understand and follow verbal instruction, written instruction and company policies ● A self-starter that can work independently and coordinate with others ● Work in a fast pace environment with the ability to manage stress and productivity guidelines ● Always maintain a professional manner in appearance and communications. We maintain a drug and alcohol-free workplace. All candidates offered a position are required to pass a pre-employment drug test. Triple Temp Cold Storage LLC is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. ·

Job Description Adecco is hiring for a Maintenance Technician – Full Job Description Location: Austin, TX Employment Type: Full‑time, onsite Shift: PM (6:00 PM–6:00 AM) PM Rotation Schedule: * Week 1: Sunday, Monday, Tuesday, every other Wednesday * Week 2: Every other Wednesday, Thursday, Friday, Saturday Overview Full‑time Maintenance Technician positions are available in a fast‑paced, technology‑driven production environment. This role helps ensure equipment stays reliable, safe, and ready for daily operations. The technician performs preventive and corrective maintenance, troubleshoots issues, documents all work, and partners with production teams to maintain consistent workflow. Key Responsibilities * Perform preventive and corrective maintenance on production equipment and support systems * Troubleshoot mechanical, electrical, pneumatic, and basic software issues * Use multimeters, thermal tools, and diagnostic equipment to identify root causes * Read and interpret electrical schematics, mechanical diagrams, and pneumatic layouts * Assist with installation, setup, calibration, and testing of new equipment * Navigate PLCs and HMIs at a basic level to read fault codes and support troubleshooting * Inspect and repair components such as motors, belts, bearings, sensors, and mechanical assemblies * Monitor equipment performance and identify improvement opportunities * Document maintenance activities, PMs, inspections, and parts usage in logs or software systems * Follow all safety procedures, including proper Lockout/Tagout and equipment safeguards * Maintain a clean, organized workspace and use proper tool control * Collaborate with production staff to minimize downtime and support daily operations Qualifications * Experience maintaining mechanical and electrical systems in a production or industrial environment * Ability to read electrical schematics, wiring diagrams, and technical documentation * Familiarity with pneumatic systems—valves, cylinders, regulators, and pressure lines * Basic understanding of PLCs and HMIs (reading fault codes and navigating screens; programming not required) * Strong computer skills, including Microsoft Word, Excel, and maintenance or CMMS software * Ability to follow written procedures, maintenance instructions, and safety guidelines * Skilled in documenting work accurately in logs or software systems * Comfortable using multimeters, hand tools, and power tools * Strong attention to detail, reliability, and willingness to learn * Comfortable working 12‑hour shifts and collaborating with production teams * English proficiency required * Must be local to Austin or able to commute Preferred (Nice to Have) * Light welding, fabrication, or metal‑working experience * Experience improving preventive maintenance processes * Knowledge of 24V control systems, sensors, relays, and basic wiring repair Pay Details: $21.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description Job Title: Industrial Maintenance Technician Pay: $32-$40 Location: Taylor, TX If you are interested, please apply and you will get a call from Devin within 2 days. Description Jr Technicians on A shift and C shift (both day shifts). Key Responsibilities • Performing preventive and corrective maintenance on Chemical and Slurry Distribution systems to ensure safe, reliable, and continuous operation in a semiconductor manufacturing environment, • Perform preventive maintenance (PM) on pumps, filters, valves, panels, piping systems, etc., • Troubleshoot and repair mechanical, electrical, and basic control/instrumentation issues, • Respond to equipment alarms and emergency calls, • Perform equipment / part checks, inspections, and parmeter monitoring, • Support system startup, shutdown, flushing, chemical changeovers, and other similar activities required on site, • Safely handle chemicals / slurry following SOPs, MSDS/SDS, and safety rules, • Replace parts (filters, sensors, etc) when required, • Document maintenance activities and complete shift handover reports, • Support new installations, modifications, and other similar activities required on site Electrical, Troubleshooting, Mechanical, Hydraulics, Pneumatics, Repair, Preventive maintenance, Service, Industrial, Electrical troubleshooting, 3 phase Top Skills Details Electrical,Troubleshooting,Mechanical,Hydraulics,Pneumatics,Repair,Preventive maintenance,Service,Industrial,Electrical troubleshooting,3 phase Additional Skills & Qualifications PLC - Omron is the brand Lift up to 40 lbs, reach overhead, work in a confined space, wear the full suit Experience Level Expert Level Job Type & Location This is a Contract to Hire position based out of Austin, TX. Pay and Benefits The pay range for this position is $32.00 - $38.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Manufacturing [Field Technician / Maintenance Mechanic] As an Equipment Technician at Tesla, Inc.Perform Preventative Maintenance (PM) on all industrial production and mechatronics equipment; Perform repairs on production-down equipment; Operate and repair every cell on a Line; Perform Corrective Ma

Manufacturing [Field Technician / Maintenance Mechanic] As an Equipment Technician at Tesla, Inc.Perform Preventative Maintenance (PM) on all industrial production and mechatronics equipment; Perform repairs on production-down equipment; Operate and repair every cell on a Line; Perform Corrective Ma

Manufacturing [Field Technician / Maintenance Mechanic] As an Equipment Technician at Tesla, Inc.Perform Preventative Maintenance (PM) on all industrial production and mechatronics equipment; Perform repairs on production-down equipment; Operate and repair every cell on a Line; Perform Corrective Ma

Job Posting Title: HVAC Refrigeration Technician I Hiring Department: Facilities Services Position Open To: All Applicants Weekly Scheduled Hours: 40 FLSA Status: To Be Determined at Offer Earliest Start Date: Ongoing Position Duration: Expected to Continue Location: AUSTIN, TX Job Details: Join the ___ team, a highly responsive and knowledgeable crew providing outstanding service for ___ and to the university community. Maintenance Operations, a branch of the Facilities Operations and Maintenance Division, provides comprehensive maintenance services in support of the University's operations. Our teams provide a comprehensive array of qualified services, backed by our licensed and certified technicians, to this end, we offer opportunities for continuing education, as well as various stipends for additional trade licenses. Our team of trained trade experts are well-matched for the university's operational and maintenance needs, whether the facility is a brand new laboratory or our iconic Tower. Our goal is to self-identify operations and maintenance issues long before our clients realize a repair is needed and take a thoughtful approach to using their resources, structuring processes, and providing the best client service and use of university resources. This goal comes from our sense of ownership and pride in our work. With this approach in mind, the team is organized into a zone-based structure and employs flexible work hours, data analysis, and technology to meet operational goals. Your skills will make a difference. You'll be working for a university that is internationally recognized for our academic programs and research. Your work will contribute to operational excellence and enhance the student experience. If you're the type of person that wants to know your work has meaning and impact, you'll like working in our department and for UT Austin. UT Austin provides an outstanding benefits package including but not limited to: • Competitive health benefits (employee premiums covered at 100%, family premiums at 50%), • Voluntary Vision, Dental, Life, and Disability insurance options, • Generous paid vacation, sick time, and holidays, • Teachers Retirement System of Texas, a defined benefit retirement plan, with employer matching funds, • Additional Voluntary Retirement Programs: Tax Sheltered Annuity 403(b) and a Deferred Compensation program 457(b), • Flexible spending account options for medical and childcare expenses, • Robust free training access through LinkedIn Learning plus professional conference opportunities., • Tuition assistance, • Expansive employee discount program including athletic tickets, • Free access to UT Austin's libraries and museums with staff ID card, • Free rides on all UT shuttle and Austin CapMetro buses with staff ID card, • For more details, please see: ___ and ___. For more information on the Maintenance Operations group, please visit: ___ Must be authorized to work in the United States on a full-time basis for any employee without sponsorship. Security sensitive; Criminal background check conducted on selected applicant. Hiring decision is contingent on applicant clearing check. This job class may contain positions that are security sensitive and thereby subject to the provisions of Texas Education Code *51.215. Applications will be reviewed online by the hiring department. This is a 40 hour work week; five 8-hour days, or possible four 10-hour days with schedule to be discussed with supervisor. Performs installation, repair, and maintenance of heating, ventilation, air conditioning, and refrigeration systems and components of environmental air conditioning, as well as commercial refrigeration, and process heating and cooling. • Performs preventive and repair maintenance on mechanical, electrical, pneumatic, steam, and electronic components of environmental control systems and equipment associated with multi-story commercial and lab buildings. This includes maintenance tasks ranging from changing air filters to replacing electric motors on large air handling units., • Installs replacement coils, motors, electronics, compressors, thermostats, humidistats, fans, and other components of chilled water and direct expansion environmental control systems to include commercial refrigeration and process heating and cooling. Treats hydronic system loops to maintain water quality., • Utilizes measuring instruments such as multimeters, refrigeration gauges, thermo-hygrometers, etc., and applies principles of thermodynamics and physics to resolve issues., • Works with a team under the direction of work leaders to solve complex technical issues with HVACR equipment., • Maintains records and prepares reports on repairs and services according to university and regulatory requirements., • Reads and interprets drawings and technical manuals. Works from written and oral instructions., • Participates in the on-call program. High school graduation or GED. Three years of experience as an HVACR technician. Type II or Universal Environmental Protection Agency (EPA) certification. Demonstrate excellent communication skills. Demonstrated ability to follow written and verbal instructions. Relevant education and experience may be substituted as appropriate. Associate's degree from a technical or vocational school. Experience as a HVACR technician in a commercial or industrial setting. More than three years of journey level experience. Experience in more than one craft or trade. Demonstrated ability to troubleshoot HVACR systems with little or no supervision. Demonstrated ability to work well within a team environment. Demonstrated stable work history. North American Technician Excellence (NATE) service certification or a State of Texas Certified Air Conditioning and Refrigeration Technician. Experience at UT Austin or other higher education institution. $52,000 + depending on qualifications • Uniforms and/or personal protection equipment (furnished), • May work in all weather conditions, • May work in extreme temperatures, • May work around chemical fumes, • May work around standard office conditions, • May work around biohazards, • May work around chemicals, • May work around electrical and mechanical hazards, • Repetitive use of a keyboard at a workstation, • Use of manual dexterity, • Climbing of stairs, • Climbing of ladders, • Lifting and moving, • This position and associated job duties have been designated as essential during extraordinary and emergency situations when the university is closed. Essential personnel must maintain contact with their supervisor and report to work as regularly scheduled unless directed otherwise., • Required to operate an electronic device such as an iPhone, iPad, or laptop/desktop computer to perform and fulfill time reporting and work management requirements. Work management requirements include receiving work assignments, updating work orders, and other functions as required., • May be required to work in confined spaces, manholes, tunnels, elevated work, extended shifts including nights, weekends, and holidays., • Considerable walking, standing, squatting, stooping, and moving of heavy materials and equipment in all weather conditions., • May be exposed to loud noise, high dust and allergen levels., • May be required to lift up to 50lbs. Often required to twist, grasp, push, pull and bend., • May be required to operate job related equipment., • May require tuberculosis screening and occasional use of a respirator., • May drive University vehicles. If driving University vehicles, may be required to maintain acceptable driver rating as established in Policy: UTS157 Section 2.5.4., • Participate in on-call program. 40 hours a week, five 8-hour days, or possibly four 10-hour days with schedule to be determined with supervisor. Some overtime, evenings, weekends, and holidays possible. • Resume/CV, • 3 work references with their contact information; at least one reference should be from a supervisor, • Letter of interest Importantfor applicants who are NOT current university employees or contingent workers:You will be prompted to submit your resume the first time you apply, then you will be provided an option to upload a new Resume for subsequent applications. Any additional Required Materials (letter of interest, references, etc.) will be uploaded in the Application Questions section; you will be able to multi-select additional files. Before submitting your online job application, ensure thatALLRequired Materials have been uploaded. Once your job application has been submitted, you cannot make changes. Important for Current university employees and contingent workers:As a current university employee or contingent worker, you MUST apply within Workday by searching for Find UT Jobs. If you are a current University employee, log-in to Workday, navigate to your Worker Profile, click the Career link in the left-hand navigation menu and then update the sections in your Professional Profile before you apply. This information will be pulled in to your application. The application is one page and you will be prompted to upload your resume. In addition, you must respond to the application questionspresented to upload any additional Required Materials (letter of interest, references, etc.) that were noted above. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

Job Posting Title: FAB Equipment Technician - Levels I, II, Sr, or Master, Texas Institute for Electronics Hiring Department: Texas Institute for Electronics Position Open To: All Applicants Weekly Scheduled Hours: 40 FLSA Status: To Be Determined at Offer Earliest Start Date: Ongoing Position Duration: Expected to Continue Location: PICKLE RESEARCH CAMPUS Job Details: About Us The___is a University of Texas at Austin-supported semiconductor consortium of state and local government, preeminent defense electronics and semiconductor companies, national labs and nationally recognized academic institutions. Our mission is to develop and execute a state-of-the-art 3D Heterogenous Integration manufacturing technology roadmap, and to provide critical pilot manufacturing capabilities to address national security needs and catalyze domestic economic growth. Join the Texas Institute for Electronics (TIE) and help us push the boundaries in critical semiconductor domains, including advanced packaging, with the aim of reestablishing U.S. prominence in semiconductor manufacturing. With over $1 billion in funding from the US DoD and the state of Texas, we're at the forefront of creating cutting-edge semiconductor manufacturing equipment and processes that will set the course for future advancements in semiconductor logic, memory, heterogeneous integration, chip cooling and more. Situated in the heart of Austin - named "America's Coolest City" by Expedia and "The Best Place to Live in the U.S." by U.S. News and World Report - the Texas Institute for Electronics embodies the city's innovative spirit. UT Austin, recognized by Forbes as one of ___, provides outstanding ___ and ___ packages that include: • Competitive health benefits (employee premiums covered at 100%, family premiums at 50%), • Voluntary Vision, Dental, Life, and Disability insurance options, • Generous paid vacation, sick time, and holidays, • Teachers Retirement System of Texas, a defined benefit retirement plan, with 8.25% employer matching funds, • Additional Voluntary Retirement Programs: Tax Sheltered Annuity 403(b) and a Deferred Compensation program 457(b), • Flexible spending account options for medical and childcare expenses, • Robust free training access through LinkedIn Learning plus professional conference opportunities, • Tuition assistance, • Expansive employee discount program including athletic tickets, • Free access to UT Austin's libraries and museums with staff ID card, • Free rides on all UT Shuttle and Austin CapMetro buses with staff ID card, • For more details, please see ___ and ___ and ___ This position may be filled at one of multiple levels depending on the qualifications, education, and experience of the selected candidate. Must be eligible to work in the United States on a full-time basis for any employer without sponsorship. In this position, the candidate is expected to wear multiple hats for successful start-up of packaging foundry. The candidate will work with engineers and other technicians responsible for FAB set up and sustaining manufacturing. • Run equipment on daily basis as per instructions from EE or Sr. Techs. Generate data and store/interpret tool data for broader use for EE or others. Identify tool related problems and fix it as per guidance or under guidance. Conduct daily FAB walks for tool 5S and fix safety issues. Interpret tool signals and respond as per instructions. • Manage inventory of spares, parts and other components for a tool. Learn tool PM and assist in tool PM and BM procedures. Interpret tool signals and respond as per instructions., • Coordinate with other technician's daily tool status. Coordinate abnormal tool signals, alarms with EE and Sr. techs and assist in fixing the alarms/signals. Learn how to bring tool back to safety operating mode from PM/BM/Alarms., • Assist in part of tool installation or various tool installations as per guidance from EE or Sr. techs. Take various tool measurements or signals and communicate for efficiency, safety and continuous operation of tools., • Take training classes to expand knowledge base within same tool or other tools. Acquire certification to perform normal, routine, daily equipment tasks. Learn support equipment for a tool and maintain continuous operations., • All the duties in "For Level I" and:, • Own more than one tool set across various departments. Learn more than one tool set, equipment. Manage support equipment for more than one tool set., • Learn troubleshooting the tool and wafer recovery. Learn tool PM/BM procedures and perform PM/BM under guidance. Acquire certification for performing PM/BM independently., • Identify proactive signals for a tool for performance enhancement and execute tasks to generate results., • All the duties in "For Level II" and:, • Generate ideas for multiple tool performances and improvement projects. Install interlocks and FDC signals for performance enhancement., • Execute projects with help of levels I and II technicians. Improve safety, efficiency, and reduce cost., • Coach and mentor levels I and II technicians. Create procedures for tool development/manufacturing swing and train people. Create Technician I and Technician II certifications and teach the classes., • All the duties in "Senior Technician" and:, • Conduct daily tool safety walks, identify operational weakness, and keep the line running., • Own broader FAB wide projects, not only tool focused, but FAB focused and create procedures. Create safety protocols for FAB and multiple tools. Coach Technician Is, Technician IIs and Sr. Engineers to expand knowledge base. Train across various shifts., • Identify multiple cost reduction and efficiency improvement projects and successful implementation. Create KPI based execution for multiple tools., • High School Diploma, • Experience in FAB processes/equipment/operations/logistics/spare management, • Level I: Entry level to 3 years of experience, • Level II: 3 to 10 years of experience, • Sr. Level: 10-15+ years of experience, • Master Level: 20+ years of experience, • Goal-oriented and ability to prioritize and multitask, • Excellent written and verbal communication skills, • Ability to work well in teams The assigned levels are determined in part on number of years of experience, but also, aptitude, ability to resolve issues, approaches for tackling multiple tasks, and overall ability to contribute to the team mission will play a role. • Relevant education and experience may be substituted as appropriate., • Associate's degree or higher in technology, mechanical engineering technology, equipment engineering technology, industrial maintenance technology, or a related field, • 5 or more years of experience in multiple areas of FAB process/equipment/operations/logistics/spare management, • Exposure in semiconductor manufacturing environment, • Exposure to semiconductor processes, process development, equipment installs and equipment modification TIE pays industry-competitive salaries. • Uniforms and/or personal protection equipment (furnished), • May work in all weather conditions, • May work in extreme temperatures, • May work around chemical fumes, • May work around standard office conditions, • May work around biohazards, • May work around chemicals, • May work around electrical and mechanical hazards, • Repetitive use of a keyboard at a workstation, • Use of manual dexterity (ex: using a mouse), • Climbing stairs, • Climbing of ladders, • Lifting and moving 20 pounds, • Resume/CV, • 3 work references with their contact information; at least one reference should be from a supervisor, • Letter of interest Importantfor applicants who are NOT current university employees or contingent workers:You will be prompted to submit your resume the first time you apply, then you will be provided an option to upload a new Resume for subsequent applications. Any additional Required Materials (letter of interest, references, etc.) will be uploaded in the Application Questions section; you will be able to multi-select additional files. Before submitting your online job application, ensure thatALLRequired Materials have been uploaded. Once your job application has been submitted, you cannot make changes. Important for Current university employees and contingent workers:As a current university employee or contingent worker, you MUST apply within Workday by searching for Find UT Jobs. If you are a current University employee, log-in to Workday, navigate to your Worker Profile, click the Career link in the left hand navigation menu and then update the sections in your Professional Profile before you apply. This information will be pulled in to your application. The application is one page and you will be prompted to upload your resume. In addition, you must respond to the application questionspresented to upload any additional Required Materials (letter of interest, references, etc.) that were noted above. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

Job Posting Title: Abatement Technician Hiring Department: Project Management and Construction Services Position Open To: All Applicants Weekly Scheduled Hours: 40 FLSA Status: To Be Determined at Offer Earliest Start Date: Ongoing Position Duration: Expected to Continue Location: AUSTIN, TX Job Details: The University of Texas at Austin's Campus Construction team seeks an individual to serve as Abatement Technician in the Abatement Shop. You'll be working for a university that is internationally recognized for our academic programs and research. If you're the type of person that wants to know your work has meaning and impact, you'll like working in our department and for UT Austin. UT Austin provides an outstanding benefits package, including but not limited to: • Competitive health benefits (employee premiums covered at 100%, family premiums at 50%), • Voluntary Vision, Dental, Life, and Disability insurance options, • Generous paid vacation, sick time, and holidays, • Teachers Retirement System of Texas, a defined benefit retirement plan, with employer matching funds, • Additional Voluntary Retirement Programs: Tax Sheltered Annuity 403(b) and a Deferred Compensation program 457(b), • Flexible spending account options for medical and childcare expenses, • Robust free training access through LinkedIn Learning plus other professional development opportunities, • Tuition assistance, • Expansive employee discount program including athletic tickets, • Free access to UT Austin's libraries and museums with staff ID card, • Free rides on all UT Shuttle and Austin CapMetro buses with staff ID card, • For more details, please see: ___s and ___ Selection made by committee and hiring supervisor based on review of online applications and results of personal interviews. Hiring decision contingent upon applicant clearing a security background check and receiving an acceptable driver's rating. Some evening, weekend, and holiday work required. Perform journey-level abatement work for the repair, containment, and abatement of asbestos, lead, and other hazardous materials from buildings, structures, equipment, and systems in compliance with Texas Department of State Health Services (DSHS) and other regulatory agencies. • Perform full-containment activities to abate and dispose of asbestos, lead, mold, and other hazardous materials in support of campus construction, maintenance, and repair projects., • Perform operations and maintenance-level activities to abate asbestos, lead, and other hazardous materials in support of campus maintenance and repair projects. Execute proper glove bag techniques and Resilient Floor Covering Institute-recommended work practices, as appropriate, when handling asbestos. Support zone maintenance shops and other departments in repair of campus facilities, including after-hours response to campus emergencies., • Oversee open order labor contractors during abatement operations. Advise non-Abatement Shop staff on proper procedures when encountering hazardous materials., • Assist in shop operations. Clean and maintain personal respirator equipment, HEPA vacuums, airless sprayers, pump-up sprayers, negative air machines, shop tools, and vehicles to ensure proper function. Maintain shop equipment and supply inventory., • Maintain a clean and safe work environment in shop and at job sites. Comply with safety standards and policies. Drive University-owned vehicles in support of campus projects., • Maintain professional licensure requirements for training, physicals, and license renewals to ensure all credentials remain current and compliant with applicable regulations. Coordinate required actions with supervisor., • Perform all work in compliance with University, DSHS and other federal, state and local directives. Read, interpret, and work from drawings, specifications, and verbal instructions., • Submit notifications for proposed work and document work performed in compliance with all regulatory directives. Document labor and materials expended for each project; accomplish daily labor report and weekly timesheet., • Attend management-directed meetings and training. Perform other duties as assigned. Be able to lift, push, and pull up to 50 pounds. May be required to work extended shifts. Wear proper PPE as work requires. Possess Texas Class "C" driver's license or ability to obtain one 30 days after becoming a Texas resident. High school graduation or GED.Three years of experience in asbestos abatement operations and ability to obtain DSHSAsbestos Abatement Supervisor's License within 12 months. Three years of experience in lead abatement operationsand ability to obtain DSHS Lead Abatement Supervisor's License within 12 months. Possess a Mold Remediation Worker License or the ability to obtain one. Five years experience in construction of containments and full abatement operations. Current and qualified medical surveillance for asbestos operations, and current blood-lead baseline. Commitment to and compliance with organizational values, goals, and policies regarding customer service, job performance, and job-site safety. Before final offer can be made, successful applicant must provide a current driver's license and acceptable driving record for the most recent 36 months. Texas driving history will be confirmed online during selection process; applicant must provide out-of-state driving history, if previously licensed in another state. Relevant education and experience may be substituted as appropriate. Associates degree or graduation from vocational or technical trade school related to abatement operations or facility construction-renovation. Five years of experience in asbestos abatement operations with two years experience as a DSHS-licensed Asbestos Abatement Supervisor. Two years experience as a DSHS-licensed Lead Abatement Supervisor. Experience and current as a DSHS-licensed Air Monitoring Technician. Experience and current as a TDLR-licensed Mold Remediation Contractor. Basic knowledge of computer applications for word processing, calendar, email, and internet. Demonstrated ability to perform and communicate in a team environment with co-workers, supervisors, and clients. Experience working in a large university or commercial-industrial physical plant. $52,500 + depending on qualifications • Resume/CV, • 3 work references with their contact information; at least one reference should be from a supervisor, • Letter of interest Importantfor applicants who are NOT current university employees or contingent workers:You will be prompted to submit your resume the first time you apply, then you will be provided an option to upload a new Resume for subsequent applications. Any additional Required Materials (letter of interest, references, etc.) will be uploaded in the Application Questions section; you will be able to multi-select additional files. Before submitting your online job application, ensure thatALLRequired Materials have been uploaded. Once your job application has been submitted, you cannot make changes. Important for Current university employees and contingent workers:As a current university employee or contingent worker, you MUST apply within Workday by searching for Find UT Jobs. If you are a current University employee, log-in to Workday, navigate to your Worker Profile, click the Career link in the left hand navigation menu and then update the sections in your Professional Profile before you apply. This information will be pulled in to your application. The application is one page and you will be prompted to upload your resume. In addition, you must respond to the application questionspresented to upload any additional Required Materials (letter of interest, references, etc.) that were noted above. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

Job Posting Title: Facilities Technician, Texas Institute for Electronics Hiring Department: Texas Institute for Electronics Position Open To: All Applicants Weekly Scheduled Hours: 40 FLSA Status: To Be Determined at Offer Earliest Start Date: Ongoing Position Duration: Expected to Continue Location: AUSTIN, TX Job Details: About Us The___is a University of Texas at Austin-supported semiconductor consortium of state and local government, preeminent defense electronics and semiconductor companies, national labs and nationally recognized academic institutions. Our mission is to develop and execute a state-of-the-art 3D Heterogenous Integration manufacturing technology roadmap, and to provide critical pilot manufacturing capabilities to address national security needs and catalyze domestic economic growth. Join the Texas Institute for Electronics (TIE) and help us push the boundaries in critical semiconductor domains, including advanced packaging, with the aim of reestablishing U.S. prominence in semiconductor manufacturing. With over $1 billion in funding from the US DoD and the state of Texas, we're at the forefront of creating cutting-edge semiconductor manufacturing equipment and processes that will set the course for future advancements in semiconductor logic, memory, heterogeneous integration, chip cooling and more. Situated in the heart of Austin - named "America's Coolest City" by Expedia and "The Best Place to Live in the U.S." by U.S. News and World Report - the Texas Institute for Electronics embodies the city's innovative spirit. UT Austin, recognized by Forbes as one of ___, provides outstanding ___ and ___ packages that include: • Competitive health benefits (employee premiums covered at 100%, family premiums at 50%), • Voluntary Vision, Dental, Life, and Disability insurance options, • Generous paid vacation, sick time, and holidays, • Teachers Retirement System of Texas, a defined benefit retirement plan, with 8.25% employer matching funds, • Additional Voluntary Retirement Programs: Tax Sheltered Annuity 403(b) and a Deferred Compensation program 457(b), • Flexible spending account options for medical and childcare expenses, • Robust free training access through LinkedIn Learning plus professional conference opportunities, • Tuition assistance, • Expansive employee discount program including athletic tickets, • Free access to UT Austin's libraries and museums with staff ID card, • Free rides on all UT Shuttle and Austin CapMetro buses with staff ID card, • For more details, please see ___ and ___ and ___ To ensure the reliable, safe, and efficient operation of critical facility and cleanroom systems through continuous monitoring, control, and maintenance of automated building, utility, and process systems. This role supports uninterrupted operations by maintaining environmental conditions and infrastructure within defined operating parameters. • Maintain and optimize facility systems within operating parameters, including automated control of water, air, pressure, temperature, and dew point through PLC, BAS, and SCADA systems. Monitor, troubleshoot, and adjust fire, electrical, mechanical, and gas systems using SCADA, PLC, DCS, and Building Automation Systems (BAS)., • Perform rounds each shift. Record conditions of systems each shift from direct observation. Systems include, but are not limited to compressed dry air, cooling towers, boilers, fire pumps, emergency generators, bulk gases, ultra-pure water, chillers, vacuum, commercial water, commercial power, waste neutralization, bulk chemical distribution. Assist in the development and revision of Standard Operating Procedures (SOPs) while supporting control room monitoring activities., • Maintenance Activities: Respond to maintenance service requests. Complete assigned preventive maintenance activities. Troubleshoot instrumentation, control loops, transmitters (pressure, temperature, flow), control valves, VFDs, and gas delivery systems to minimize downtime. Utilize diagnostic tools and CMMS systems to Finalize maintenance documentation and support predictive maintenance initiatives. Support cleanroom environmental control systems including CDA, high-purity gases, and humidity/temperature control loops., • Other related functions as assigned., • Operative knowledge of air handlers, air compressors, boilers, chillers, gas delivery systems, and automated control systems., • General knowledge of semiconductor facilities operations for utilities, waste processing and water systems., • Experience troubleshooting PLC, DCS, or SCADA-based control systems, • Experience with instrumentation calibration and control loop diagnostics, • Ability to read and interpret P&IDs, electrical schematics, and wiring diagrams, • Experience supporting gas delivery and clean dry air (CDA) systems, • Operating knowledge of dry air, inert gas pipefitting., • Basic computer skills, including experience using Microsoft Word, Excel, and PowerPoint., • Excellent communication skills., • Attention to detail., • Mechanical skill and affinity., • Self-starter, able to work with a sense of urgency., • Associate or bachelor's degree, • Experience with instrumentation (pressure, flow, temperature transmitters), VFDs, and control valves., • 2+ years of experience troubleshooting BAS, PLC, DCS, or SCADA control systems in industrial or semiconductor environments., • 4 years of experience in a semiconductor facilities environment. TIE Pays Industry-Competitive Salaries • Uniforms and/or personal protection equipment (furnished), • May work around chemical fumes, • May work around standard office conditions, • May work around chemicals, • May work around electrical and mechanical hazards, • Repetitive use of a keyboard at a workstation, • Use of manual dexterity (ex: using a mouse), • Climbing of stairs, • Climbing of ladders, • Lifting and moving 50 pounds, • Monday - Friday 8am to 5pm, • Occasional nights and weekends required, • Resume/CV, • 3 work references with their contact information; at least one reference should be from a supervisor Importantfor applicants who are NOT current university employees or contingent workers:You will be prompted to submit your resume the first time you apply, then you will be provided an option to upload a new Resume for subsequent applications. Any additional Required Materials (letter of interest, references, etc.) will be uploaded in the Application Questions section; you will be able to multi-select additional files. Before submitting your online job application, ensure thatALLRequired Materials have been uploaded. Once your job application has been submitted, you cannot make changes. Important for Current university employees and contingent workers:As a current university employee or contingent worker, you MUST apply within Workday by searching for Find UT Jobs. If you are a current University employee, log-in to Workday, navigate to your Worker Profile, click the Career link in the left hand navigation menu and then update the sections in your Professional Profile before you apply. This information will be pulled in to your application. The application is one page and you will be prompted to upload your resume. In addition, you must respond to the application questionspresented to upload any additional Required Materials (letter of interest, references, etc.) that were noted above. Employment Eligibility: Regular staff who have been employed in their current position for the last six continuous months are eligible for openings being recruited for through University-Wide or Open Recruiting, to include both promotional opportunities and lateral transfers. Staff who are promotion/transfer eligible may apply for positions without supervisor approval. Retirement Plan Eligibility: The retirement plan for this position is Teacher Retirement System of Texas (TRS), subject to the position being at least 20 hours per week and at least 135 days in length. Background Checks: A criminal history background check will be required for finalist(s) under consideration for this position. Equal Opportunity Employer: The University of Texas at Austin, as an ___,complies with all applicable federal and state laws regarding nondiscrimination and affirmative action. The University is committed to a policy of equal opportunity for all persons and does not discriminate on the basis of race, color, national origin, age, marital status, sex, sexual orientation, gender identity, gender expression, disability, religion, or veteran status in employment, educational programs and activities, and admissions. Pay Transparency: The University of Texas at Austin will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Employment Eligibility Verification: If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original ___ to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in loss of employment at the university. E-Verify: The University of Texas at Austin use E-Verify to check the work authorization of all new hires effective May 2015. The university's company ID number for purposes of E-Verify is 854197. For more information about E-Verify, please see the following: • ___ [PDF], • ___ [PDF], • ___ [PDF] Compliance: Employees may be required to report violations of law under Title IX and the Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act (Clery Act). If this position is identified a Campus Security Authority (Clery Act), you will be notified and provided resources for reporting. Responsible employees under Title IX are defined and outlined in ___. The Clery Act requires all prospective employees be notified of the availability of the Annual Security and Fire Safety report. You may ___ or obtain a copy at University Compliance Services, 1616 Guadalupe Street, UTA 2.206, Austin, Texas 78701.

Job DescriptionSalary: Position Summary Under general supervision, the Senior Maintenance Technician performs a wide range of moderate to complex technical tasks related to install, maintain, trouble shoot and repair of manufacturing equipment, including but not limited to induction furnaces, laser welding, casting furnaces and related equipment. This role also includes maintaining, and repairing heating, cooling, ventilation, and related systems as well as general building repairs. Strong knowledge of electronic systems, PLCs, and schematics required. Experience with related testing equipment required. This position requires strong technical expertise, problem-solving skills, and the ability to work independently while ensuring safety and operational efficiency. Essential Job Functions -Melting Machines & Industrial Equipment • Troubleshoot, repair, and maintain melting machines and related industrial equipment., • Ensure proper operation of machinery through regular inspections and preventative maintenance., • Electronics & PLCs, • Diagnose and repair electronic systems and programmable logic controllers (PLCs)., • Read and interpret electrical schematics and wiring diagrams., • Support automation and control systems to maintain efficient production processes., • General Maintenance, • Order and maintain parts inventory., • Troubleshoot and repair mechanical components in HVAC equipment, including semi-hermetic compressors (up to 30-ton), liquid line driers, condenser fans and motors, and heater-related components., • Troubleshoot and repair electrical and control components in HVAC systems, including contactors, automation controllers, relays, circuit boards, limit switches, and damper drive motors., • Perform scheduled preventative maintenance tasks such as replacing filters and belts, cleaning coils, and cleaning supply and return grills., • Monitor and inspect heating and cooling systems to ensure proper operation., • Repair, maintain, and install duct systems, including adjusting dampers, installing flex ducts, supply air diffusers, and return air grills., • Repair and maintain heat and steam boilers. Specialized Knowledge/Skills • Strong problem-solving and analytical skills., • Ability to work independently and maintain professionalism under minimal supervision., • Ability to use multimeters, related testing equipment including power tools, • Ability to read and interpret schematics and technical diagrams., • Efficient with controls, • Proficiency in troubleshooting HVAC systems, melting machines, and PLC-controlled equipment., • Technical School or Community College, • Industrial Maintenance Experience, • Electrical / mechanical Technology, • HVAC Mechatronics and Automation, • Certifications: Electronic, Electrical, Mechanical and HVAC, • Minimum 4 years Experience in Industrial Maintenance, • PLC Experience, • Able to drive a forklift

Job DescriptionDescription:COTALAND Ride Maintenance(Part-Time) Circuit of The Americas (COTA) is a 365-entertainment destination for world-class events located in Austin, TX. The sports and entertainment portfolio at COTA is unmatched in the country with Formula 1 US Grand Prix, NASCAR and MotoGP attracting global fans during championship races on the famed Circuit and Live Nation producing over 30 headline concerts every year at the Germania Insurance Amphitheater. Opening in 2026, COTA’s amusement park is a 20-acre theme park featuring two first of their kind Roller Coasters and over three dozen rides. Job Description: The Part-Time Ride Maintenance Technician supports the COTALAND Maintenance Department by assisting with the inspection, repair, and upkeep of amusement rides and attractions. This role plays a vital part in ensuring that all rides operate safely, efficiently, and in compliance with state and manufacturer requirements. This position is ideal for mechanically inclined individuals who enjoy hands-on work, learning technical skills, and being part of a high-energy, guest-focused environment. This role is on-site. Requirements: Requirements & Essential Functions: • Perform daily inspections and routine maintenance on rides and attractions under the supervision of senior maintenance staff., • Assist in troubleshooting and repairing mechanical, electrical, and hydraulic components., • Complete assigned maintenance logs and documentation accurately., • Help maintain a clean, organized, and safe maintenance shop and ride areas., • Support the operations team with ride testing and safety verifications prior to opening., • Follow all safety and lockout/tagout (LOTO) procedures at all times., • Assist with seasonal ride preparation for events such as Peppermint Parkway and other COTA festivals., • Perform additional duties as assigned by the Maintenance Supervisor or Director. Required Qualifications: • Must be at least 18 years old, • High school diploma or GED, • Previous maintenance or mechanical experience (automotive, industrial, or amusement rides), • Basic understanding of tools, safety procedures, and maintenance practices, • Basic mechanical aptitude and willingness to learn technical systems, • Availability to work flexible hours, including weekends, evenings, and holidays Physical Demand & Work Environments: • Ability to stand, sit, use of hands to handle, or feel, reach with hands and arms., • Ability to lift and/ or move up to 25 pounds., • Ability to squat, bend, twist, push/pull., • Ability to stand/walk for long periods., • Work in extreme environments outdoors throughout the year., • The noise level in the work environment is usually moderate but can be loud during events. Salary commensurate with experience. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job. EQUAL EMPLOYMENT OPPORTUNITY: COTA strongly supports equal employment opportunity for all applicants regardless of race, color, religion, sex, gender identity, pregnancy, national origin, ancestry, citizenship, age, marital status, physical disability, mental disability, medical condition, sexual orientation, genetic information, or any other characteristic protected by state or federal law.

Job Description About Wildpack Wildpack is a rapidly growing and established co-packaging and co-manufacturer with multi-site facilities for both non-alcoholic and alcoholic beverages. Wildpack produces and packages ready-to-drink beverages for a variety of brand owners in the retail CPG space. The company specializes in aluminum can beverage sleeving, filling, and third-party logistics. We are looking for someone who is a natural solutions finder and is committed to delivering high quality service with high-performance results. We are looking for you to take charge of projects and to confidently navigate competing deadlines in a fast-paced environment. Bring an entrepreneurial spirit and come grow your career in a fun, inclusive, and established business that is supportive with lots of opportunity for advancement. The Company recently went public on the Canadian Toronto Stock Exchange Venture, bringing massive opportunities to its employees for career progression and a variety of learning opportunities. Wildpack has continued to expand its team and clientele base year-after-year and expects to continue its growth through training, developing, and opening opportunities to its team through career advancement. About this role As a Maintenance Technician, you’re committed to delivering high quality service with high-performance results. We are looking for you to take charge of projects and to confidently navigate competing deadlines in a fast-paced environment. Bring an entrepreneurial spirit and come grow your career in a fun, inclusive, and established business that is supportive with lots of opportunity for advancement. A day in the life: What you do * Responsible for assisting with the correct maintenance, installation and operation of all equipment, HVAC, compressed air, chill water, and electrical systems within the facility. * Help to manage the compliance with necessary Federal, State and local safety and health, environmental, building and fire standards. * Manage the Preventative Maintenance Program for all equipment within the facility. * Ensure expectations are met for all outside Wildpack work. * Assist with any needed installation of new equipment and facility management. * Perform all other duties as assigned Work Schedule: * Weekday and Weekend hours on consistent rotation * Flexible 8-12 hour shifts with the opportunity for overtime Qualifications: What you know * Minimum 2-3 years related experience in an industrial/ warehouse/manufacturing environment * Able to do minor electrical/ mechanical repairs such as change motors and gearboxes and all power transmission items related to same * Must be able to complete multiple tasks simultaneously and stay organized * Knowledge of all applicable government regulations * Must have good judgment and sound decision making skills * Capable of physical mobility including walking, sitting, bending, twisting, standing, pushing, pulling and lifting (up to 50 pounds periodically w/ lift assist device) * Able to work in a production environment, recognizing various sounds and alarms * Infrequent local travel may be required Your Benefits: What you get We invest in our people, support their growth through mentorship, professional development, and education opportunities. We strive to offer a work-life balance, creating a culture that is people-focused and fun. Here are some of the benefits you can expect as part of our team: * Hourly rate based on experience * Medical, Dental and Vision Insurance * Generous PTO

Job DescriptionAbout Base Base is America’s next-generation power company. We’re rebuilding the foundation of modern civilization–electricity–by deploying a vast network of distributed batteries that is transforming today’s fragile, centralized grid into a resilient and abundant system. We are engineers, operators, and creatives solving some of the most complex, interdisciplinary challenges of our time. About the Role As a Maintenance Technician at Base, you’ll play a hands-on role in ramping up our battery production lines - keeping the equipment running at full speed. You’ll perform preventative maintenance, troubleshoot and repair mechanical, electrical, pneumatic, and hydraulic systems, and learn to interpret schematics and technical diagrams. Along the way, you’ll document work, track parts and supplies, and operate safely with hand and power tools in a fast-paced, high-growth factory environment. This is a chance to gain exposure to advanced automation and robotics while building the skills to grow your career in modern manufacturing. What You’ll Do * Perform preventative maintenance (PM) on industrial production equipment * Assist with troubleshooting and repairing equipment issues * Support corrective maintenance on mechanical, electrical, pneumatic, and hydraulic systems * Learn to read and interpret schematics, technical diagrams, and mechanical drawings * Maintain accurate documentation of work performed and help track parts and supplies * Operate safely with hand tools, power tools, and diagnostic equipment in a factory environment What You’ll Bring * 0–2 years of experience in maintenance, mechanical, or electrical work (or technical training/apprenticeship) * Basic understanding of mechanical systems (conveyors, motors, actuators, etc.) and electrical systems (AC/DC circuits, sensors, wiring) * Comfortable using basic hand tools and diagnostic equipment * Strong problem-solving mindset with willingness to learn advanced systems (robotics, PLCs, automation) * Physically capable of lifting up to 50 lbs., standing/walking for extended periods, and performing work that requires bending, squatting, kneeling, or climbing * Reliable, detail-oriented, and able to manage multiple priorities in a fast-moving environment About This Team The Maintenance team is the backbone that enables Base to scale battery production from prototype to thousands of units per year. Every hour of uptime you create directly translates to more batteries reaching customers and accelerating the energy transition. You'll be working on cutting-edge production lines where a single piece of equipment down can halt an entire manufacturing cell—making your ability to diagnose, repair, and prevent failures essential to Base's growth trajectory. This team offers a rare opportunity to build deep technical expertise across mechanical, electrical, and automation systems while seeing the immediate impact of your work: batteries rolling off lines you kept running, production records you helped set, and skills you developed that will define the future of your manufacturing career. Our Values * First Principles Thinking: Question assumptions. Principles > rules. * Operate at Base Pace: Focus on what matters, act quickly, and learn by doing. * Give & Get Feedback: Be direct, be humble, and maintain a growth mindset. * Everyone’s an Owner: Follow through on commitments and own results. * Strong Opinions, Loosely Held: Drive clarity and make calls with imperfect information. * Committed to the Mission: Rebuilding the grid is a big challenge. We work hard because we care deeply about the impact we’re creating. We work in-person. It’s not a 9-to-5. We are all-in. * Fun & Optimism Coexist with Grit: Collaboration and celebration coincide with the intensity of building real things. Do the best work of your life at Base.

Job Description 🔧 Assembly Technician – Cleanroom Environment High‑Tech | Fast‑Growing | Contract‑to‑Hire 🚀 About the Role Join a rapidly expanding, cutting‑edge manufacturing team where precision, quality, and innovation lead the way. As an Assembly Technician, you’ll perform hands‑on mechanical assembly inside a cleanroom environment, working with advanced components used in high‑tech industries. This role is ideal for individuals with strong mechanical aptitude, excellent attention to detail, and experience in semiconductor, electronics, aerospace, or advanced manufacturing settings. 🔧 What You’ll Do • Operate a wide range of cleanroom‑approved assembly tools, • Perform minor equipment setups and adjustments, • Review production data and flag any non‑conformance issues, • Conduct tests and quality checks on assembled units, • Interpret and follow engineering drawings and work instructions, • Identify and communicate potential improvements, • Work under direct supervision while contributing to a fast‑paced team environment💡 What You Bring, • 2+ years of recent mechanical assembly experience, • Semiconductor industry experience strongly preferred, • Proficiency with a variety of hand & power tools, • Excellent visual acuity and manual dexterity, • Clear communication skills with the ability to explain prior experience, • Vocational or technical training is a plus💵 Compensation & Schedule, • Base Pay: $19.50/hr, • 2nd Shift Differential: +10% (Total: $21.45/hr), • Up to 10‑hour workdays as needed, • Overtime available on Saturdays, • Double‑time pay on Sundays!, • 90‑day contract‑to‑hire opportunity🎉 Why You’ll Love Working Here, • Opportunity to convert to a permanent role, • Fun, energetic, supportive team culture, • Retention bonuses of $250 each at 30, 60, and 90 days, • Work with cutting‑edge technology inside a modern cleanroom ✨ Fastest start times available — the company just opened 2nd shift for the first time! Training Schedule: 3–6 weeks | 6:00 AM – 2:30 PM, Mon–Fri, then transition to 2nd shift. ⚠️ No 1st‑shift openings at this time. This position requires full cleanroom attire and consistent adherence to cleanroom standards. 🌟 Ready to Build Your Future? If you want to join an exciting, growing team and advance your skills in a high‑tech environment, we want to hear from you. Apply today and take the next step in your career! Job Type & Location This is a Contract to Hire position based out of Austin, TX. Pay and Benefits The pay range for this position is $19.50 - $21.45/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Austin,TX. Application Deadline This position is anticipated to close on Apr 8, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionSalary: $85,000 - $95,000 Maintenance Technician (Electrical Stringing Equipment) The opportunity Join a cutting-edge team transforming the way high-voltage transmission lines are built. In this hands-on role, youll take ownership of the maintenance, inspection, and repair of specialized heavy electrical and hydraulic equipment that powers our innovative drone-enabled stringing operations. Your expertise will keep critical assets running safely and efficiently minimizing downtime, maximizing reliability, and ensuring every project runs at peak performance. About Infravision Infravision is a high growth technology enabled services company specializing in aerial robotics and software solutions for the transmission industry with a focus on increasing grid capacity and automating power line construction. Infravisions mission is to deliver solutions to modernize and decarbonise the power grid and accelerate the worlds transition to renewable energy transition. Trusted by some of the worlds largest electric utility companies, Infravisions technologies and services are at the cutting edge of transmission and power grid modernization and digitisation. This is an exciting time to join Infravision as we are scaling our business globally. Infravision operates across Australia, the United States of America and most recently India. There are lots of opportunities for you to have an influence and impact from day one. At Infravision we aim to have a positive impact on our people, customers and the environment. Why work for Infravision • Join a mission driven organization and make a meaningful impact on climate change and decarbonising the global electric grid., • Competitive salary and benefits., • Equity Ownership. Our employees are able to participate in the Companys employee share option plan and share in the benefits of growing a successful technology company., • Collaborative and energizing environment. We have an enjoyable, dynamic and collaborative work environment. What youll do • Maintain and repair specialized stringing equipment including tensioners, pullers, generators, and hydraulic systems to keep high-voltage transmission projects running smoothly., • Diagnose and troubleshoot complex electrical, hydraulic, and mechanical systems using, • advanced diagnostic tools and OEM schematics., • Perform preventative maintenance on diesel engines, transmissions, and control systems to ensure reliability and minimize downtime., • Uphold strict safety and compliance standards, conducting thorough inspections and adhering to OSHA and company procedures., • Support field operations, traveling to job sites for on-the-spot repairs, inspections, and technical assistance., • Manage parts inventory and maintenance records through digital systems to keep equipment performance and traceability at the highest level. What we are looking for Education and Experience * • High school diploma or GED required., • Vocational/Technical certification or Associate Degree in Diesel Mechanics, Electrical/Mechanical Technology, Heavy Equipment Repair, or a related field is highly preferred., • Minimum of 5 years of hands-on experience in maintaining and repairing heavy industrial, construction, or mining equipment., • Proven experience specifically with conductor stringing equipment (e.g., TESMEC, Condux, Pullz-All) or similar cable-handling machinery in the utility or construction sector is a significant asset. Specialized Knowledge and Skills * • Electrical Systems: Strong capability in troubleshooting and repairing up to 480V three-phase electrical systems, controls, VFDs (Variable Frequency Drives), and low-voltage DC control circuits., • Hydraulics & Pneumatics: Expert knowledge of open and closed-loop hydraulic systems, including component removal, re-sealing, and calibration., • Mechanical Systems: Solid understanding of diesel engine operation, powertrains, and braking systems in heavy-duty applications., • Problem-Solving: Exceptional diagnostic and fault-finding skills under pressure., • Communication: Ability to clearly document repairs and communicate technical issues to non-technical personnel (Field Supervisors, Operators)., • Licensure: Valid driver's license required; Commercial Driver's License (CDL) or ability to obtain one within 90 days is often required due to the size of equipment being serviced. Work Environment * • Work is performed both in a maintenance shop and outdoors in challenging weather conditions and rugged terrain at active construction sites., • Availability for on-call duties, extended hours, and travel to remote sites is required., • Must be physically capable of standing, bending, climbing, and safely lifting objects weighing up to 75 lbs. Next Steps Click on the Apply button to start your journey and join the Infravision team today. Find out more about Infravision If you'd like to delve deeper into the world of Infravision, we invite you to stay connected with our latest updates, news, and insights by following our social media channels and visiting our website . Diversity and inclusion At Infravision, diversity and inclusion are integral to our culture. We welcome applicants from all backgrounds, fostering an inclusive environment where unique perspectives are valued. Our competitive compensation package, including Employee Share Options, reflects our commitment to recognising and rewarding talent. We support flexible work arrangements for a harmonious work-life balance. Infravision is a proud veteran employer, with up to 40% of our workforce being from former armed forces backgrounds.

Job Description Vanderlande Logistics is seeking experienced mechanical and controls technicians in support of the team located in Austin, Texas, to fill Maintenance Technician Level III roles. This position requires experience and knowledge in the responsibilities as outlined. Responsibilities: Performing maintenance, repair, troubleshooting, and testing of the Baggage Handling System and their associated components, providing accurate and timely written reports of safety, operational, and maintenance activities. Must have the ability to interpret data and suggest maintenance schedule/activity adjustments to the Manager. Update daily, weekly, and monthly maintenance activity schedules. Order and maintain a stock of spare parts necessary for proper servicing of the BHS. Ensure all Preventative and Predictive Maintenance practices and procedures are scheduled and followed. Physical requirements include, but are not limited to: Lifting (50 to 100 pounds), bending, reaching, climbing, walking, crawling, standing, sitting, climbing stairs, speaking, sight, and/or hearing to complete the job duties. Required Skills / Education: • Experience: Five + years of experience, • Education Required: HS Diploma or GED or equivalent experience required, • Electro-Electronics / Mechanical skills required., • Excellent Customer Relations skills., • Adhere to all safety regulations and safe work practices., • Mechanical troubleshooting skills including but not limited to belts, bearings, pulleys, drives, and gearmotors., • Industrial electrical troubleshooting skills including 480V three phase motor and control circuits, electrical schematic print reading, variable frequency drives, motor starters, and input/output systems required., • Working knowledge of PLC systems and operations preferred., • Familiarity with high level control systems SCADA systems, and network architecture including servers, ethernet, fiber optic, network switches (ethernet, fiber), workstations, and barcode scanning systems., • Maintenance management software skills including generating and completing preventive and corrective maintenance, scheduling maintenance, and tracking inventory., • Basic management and supervisory skills involving organization, communications, scheduling, and computers., • Must have driver license with clean MVR., • Ability to pass all background checks and security screenings per airport requirements., • Qualified Applicants must be legally authorized for employment in the United States. Why Join Vanderlande? • Benefits Start on day one. The starting pay rate for this position is $ 36.00. The actual wage offered may be lower or higher depending on budget and candidate experience, knowledge, skills, qualifications and premium geographic location., • $1,000 Sign on Bonus, • We value our employees and create an environment for career growth, • Equal opportunity workplace that embraces and promotes ownership culture, empowerment, open communication, diversity, and collaboration, • Professional development and tuition reimbursement, • Matching 401(k), • 18 days of paid PTO

Job Description Job Title: Field Service Technician – CNC Machine Tools Join Our Team and Keep Precision Manufacturing Moving! Are you a skilled troubleshooter who thrives on solving complex mechanical and electrical challenges in the field? Do you enjoy the freedom of working independently while delivering top-notch service to customers across beautiful South and West Texas? We're seeking motivated Field Service Technicians to install, diagnose, repair, and maintain state-of-the-art CNC machine tools. You'll be the go-to expert ensuring our clients' production lines run smoothly and efficiently - making a real difference in manufacturing every single day. Location & Travel: Based in the greater Houston, San Antonio, or Austin, TX area (relocation assistance may be available for the right candidate). Expect rewarding travel throughout South Texas—no two days are the same! What You'll Do: • Travel to customer sites to install, set up, troubleshoot, and repair CNC equipment with precision and efficiency, • Diagnose mechanical, electrical, and control issues using your expertise and cutting-edge diagnostic tools, • Read and interpret technical manuals, schematics, blueprints, and assembly drawings like a pro, • Perform preventive maintenance and upgrades to maximize machine performance and uptime, • Provide exceptional customer service, clear communication, and detailed electronic service reports, • High school diploma or equivalent (technical/vocational training or associate degree a big plus), • At least 2 years of hands-on experience in industrial equipment repair, maintenance, or field service—ideally with CNC machines, automation, or similar precision equipment, • Strong mix of mechanical aptitude, electrical knowledge, and troubleshooting skills, • Familiarity with CNC operation, setup, and machine design principles, • Proficiency reading measurement tools, electrical/mechanical schematics, and technical documentation, • Comfortable with Windows-based computers, Microsoft Office, and digital reporting tools, • Excellent communication, organization, and interpersonal skills—you're great at building trust with customers, • Valid driver's license with a clean driving record, • Competitive salary with performance-based opportunities for growth, • Comprehensive benefits package, including:, • Medical, dental, and vision coverage, • Life insurance and long-term disability, • 401(k) plan with company match, • Paid vacation and holidays, • Company-provided work vehicle, uniforms, tools, and equipment, • Extensive paid training—including factory certifications and ongoing skill development, • The independence and variety of field work combined with strong team support Apply today and become part of a team that's keeping Texas manufacturing at the cutting edge.

Job DescriptionDescription: The Company Miner Ltd, an OnPoint Company, is an industry-leading service and equipment solutions provider with branch-based operations across the country. OnPoint Group is a fast-paced and ever-changing company and has been awarded the Best Managed Companies Award by Deloitte and WSJ for three years running, as well as having been named to the Inc. 5000 Fastest Growing Companies list for eight consecutive years! We believe in challenging the status quo and finding a better way for our customers, which is how we have grown into the company we are today. Miner drives down the cost of warehousing and materials management operations saving our customers revenue and time by understanding their business, finding efficiencies in their operation, providing faster systems repairs and delivering expertly executed scheduled maintenance. For more than 20 years, Miner has consistently delivered professional emergency maintenance service, equipment analysis and proactive preventative maintenance solutions to companies throughout North America. Miner solutions leave their customers more time to focus on their core business – not on the business of maintenance and materials management. Job Summary Our Commercial Dock & Door Service Technician (AKA = “Service Professionals”) are the core of our preventative and emergency response services for our customers. You may call them a “technician”, but the role is more than using tools to fix broken items. Service Professionals are on the road, troubleshooting complex issues in places like commercial buildings, aircraft hangers, schools, fire/police departments, and much more. A Service Professional might spend an hour fixing a broken door for a hospital garage and an hour later they could be heading to a large warehouse to fix loading dock equipment. This role has unique access to see the inner workings of some of the largest operations in North America, and that’s just before lunchtime. Our people make us great and for us, that starts with finding the right person to fill our open positions. Anyone interested in this role should be able to answer yes to these questions: 1. Do I enjoy variety and complexity?, 2. Does the idea of autonomy and independence excite me?, 3. Can I have fun, while keeping it safe and efficient?, 4. Am I looking for a career family and not just a job?, 5. Would my friends and family describe me as a “tinkerer”? If you answered yes to those questions, we invite you to keep reading and hit that apply button! What You’ll Do Service Professionals are responsible for hands-on customer care. They troubleshoot, service, inspect, install, and repair industrial equipment of all shapes and sizes. There is paperwork involved (what job doesn’t have it), as a Service Professional there is expectation that work orders be maintained on paper and digitally. The role operates a vehicle regularly to visit different customer sites and plays a major part in maintaining safety and OSHA compliance for the Company. Requirements: What We Look For Qualified candidates answered “Yes” to all of our questions AND will have in their toolbox, the following skills: • 2-4 years of relevant experience…we care more about how you execute, the quality of your work product, and if you can make an impact to Miner customers., • Ability to repair industrial facilities, including doors, loading docks, and dock-levelers., • Ability or a desire to learn welding, steel fabrication, and electrical. If you have Hydraulic and Pneumatics experience, awesome, call it out on your submission so we know where to find you!, • Ability to take direction and work independently while on the road for hours each day., • Strong communication, problem solving, and analytical skills. The ability to think through complex situations critically is a must., • Technical school training and OEM certifications are desired but not required., • Ability to work a flexible schedule, with nights, weekends, and Holidays. Overtime opportunities are available, so a willingness to work is what we need. We thought you’d never ask. Link to benefits overview: Benefits The benefits listed are subject to change at any time. Please speak with an HR Representative for details. In the case of conflict between the information listed and the official plan documents, the plan documents will always govern. In addition to those benefits, Service Professionals can look forward to: • Competitive pay, including incentives, • Uniform and boot allowance, • Training and the opportunity for growth, • Company issued truck for work travel, • Autonomy and independence, • Competitive PTO and Paid Holidays Miner Ltd. considers applicants for all positions without regard to race, color, religion, creed, gender, national origin, age, disability, genetic information, marital or veteran status, or any other legally protected status. Disclaimer This job posting may also appear on other job boards. Be aware that job postings on external job boards may not be authorized by OnPoint Group and may contain inaccurate or incomplete information. While we encourage you to explore these opportunities, please be aware that we do not endorse or control the content on these external sites. We are not responsible for the accuracy, completeness, or reliability of information posted on other job sites, and we are not liable for any damages or losses that may arise from your use of that information. You are solely responsible for verifying the accuracy and completeness of any information you obtain from external sources. Applicants should refer to OnPoint Group’s Careers Page for the most accurate job posting and reach out to the Company with any questions about a job posting. Salary Range The pay range noted represents the company’s good faith minimum and maximum range for this role at the time of posting. The actual compensation offered to a candidate will be dependent upon several factors, including but not limited to experience, qualifications, and geographic location. Employees may be eligible for additional incentive pay.

Job Description Stones River Electric is actively seeking a motivated and experienced service electrician to assist in our National operations. Responsibilities include: • Ability / knowledge to operate and maintain a bucket truck, • Ability to Travel throughout the state, • Troubleshooting; Perform service, repair, and maintenance of electrical systems in commercial facilities (retail, office, industrial, hospitality, etc.), • Performing skilled electrical field operations, with the support of office coordination., • Minimum of 5 years of Bucket Truck / Equipment Hauling experience, • Must be computer literate, • Must be a self-starter, • Must have excellent communication skills, • Valid driver’s license, • Successful completion of drug screening, background check, and motor vehicle check, • Hand Tools – Provided by Technician (including but not limited to), • Voltage Tester / Meter, • Linesman Pliers, • Wire Strippers, • Diagonal Cutters, • Company Vehicle, Gas Card & Credit Card, • Equipment, • Phone Reimbursement, • Storage Unit to Store Company Materials Compensation: • Medical, dental & vision, • Paid Holidays, • Vacation, • 401K Match, • Sign-on/Referral Bonus after 90 Days Qualified candidates please apply today and submit your resume or work history. We are an equal opportunity employer. APPLY TODAY. Company Description Stones River Electric stands as a distinguished family-owned and privately held company with a rich legacy spanning over 30 years. Our expertise lies in leading-edge services encompassing the design, installation, management, and maintenance of facility lighting, electrical, and energy solutions. Recognized for our unwavering dedication to enhancing energy efficiency and delivering cost-effective solutions, we have established a stellar reputation for innovation and excellence in the industry. As a dynamic and growing organization, we prioritize top-tier expertise, professionalism, and exceeding customer expectations. Join our team and be a part of our enduring legacy of success in the electrical industry! Company DescriptionStones River Electric stands as a distinguished family-owned and privately held company with a rich legacy spanning over 30 years. Our expertise lies in leading-edge services encompassing the design, installation, management, and maintenance of facility lighting, electrical, and energy solutions. Recognized for our unwavering dedication to enhancing energy efficiency and delivering cost-effective solutions, we have established a stellar reputation for innovation and excellence in the industry. As a dynamic and growing organization, we prioritize top-tier expertise, professionalism, and exceeding customer expectations. Join our team and be a part of our enduring legacy of success in the electrical industry!Stones River Electric stands as a distinguished family-owned and privately held company with a rich legacy spanning over 30 years. Our expertise lies in leading-edge services encompassing the design, installation, management, and maintenance of facility lighting, electrical, and energy solutions. Recognized for our unwavering dedication to enhancing energy efficiency and delivering cost-effective solutions, we have established a stellar reputation for innovation and excellence in the industry. As a dynamic and growing organization, we prioritize top-tier expertise, professionalism, and exceeding customer expectations. Join our team and be a part of our enduring legacy of success in the electrical industry!

Job Description We are looking for a Warehouse Specialist with Engineering/Electrical/Automotive Background to join our technical team and serve as a key technical leader. This role requires strong mechanical and electrical aptitude, a passion for problem-solving, and the ability to work independently on complex technical challenges. You will be responsible for diagnosing, repairing, refurbishing, and maintaining a diverse range of coffee equipment while mentoring junior team members and contributing to operational excellence. Key Responsibilities: • Diagnose, repair, and refurbish a wide variety of coffee equipment including espresso machines, grinders, brewers, and related accessories, • Troubleshoot complex mechanical, electrical, and hydraulic issues across multiple equipment types and brands, • Lead technical projects from assessment through completion with minimal supervision, • Develop and document technical procedures, best practices, and quality standards, • Mentor and train technicians and warehouse support staff on technical skills and processes, • Conduct root cause analysis on equipment failures and after-sales issues, • Collaborate with operations and sales teams to provide technical expertise and client consultation, • Test and validate equipment performance to ensure it meets our quality standards before shipment, • Manage technical inventory, parts sourcing, and vendor relationships, • Participate in continuous improvement initiatives to refine refurbishment processes and operational efficiency, • Minimum 4+ years of hands-on technical experience in equipment repair, maintenance, or a related technical field (appliance repair, industrial equipment, HVAC, automotive, etc.), • Strong mechanical and electrical troubleshooting skills, • Proven ability to work independently and manage multiple technical projects simultaneously, • Experience reading technical diagrams, schematics, and service manuals, • Excellent problem-solving skills and attention to detail, • Strong communication skills and ability to explain technical concepts to non-technical team members, • Physical ability to lift and move heavy equipment (50+ lbs), • Commitment to quality workmanship and continuous learning We understand that coffee equipment may be new territory for experienced technicians from other fields. We provide comprehensive training and support to help you develop expertise in coffee equipment while leveraging your existing technical skills. If you're a strong technician who enjoys learning new systems and solving complex problems, we'd love to hear from you. Benefits: • Paid time off, • Professional development assistance and ongoing technical training, • Opportunities for career growth and leadership within a rapidly expanding company, • Goal-oriented work culture providing autonomy and opportunities for advancement, • Work with a diverse range of cutting-edge coffee equipment

Job Description Talent Acquisition Partner About Us At Naumann Hobbs Material Handling, we’re innovators and problem-solvers, delivering top-tier mobile repair solutions across Arizona, California, Nevada, Texas, and Utah. With over 25 years of trusted service, we keep contractors, municipalities, and fleet operators moving with minimal downtime. As we continue to grow, we are seeking a skilled recruiting professional to support our talent needs. The Role The Talent Acquisition Partner is responsible for managing full-cycle recruitment across technician and operations/management roles within the diesel fleet and mobile maintenance sector. Reporting to the Director of Internal Communications & Culture, this position works on-site from our Austin, TX office and partners closely with hiring managers to develop and execute sourcing strategies for critical operational roles. Responsibilities • Manage full-cycle recruitment for diesel technician, service management, and operations roles across multiple locations, • Develop and execute proactive sourcing strategies through Indeed, direct outreach, and additional channels to build qualified candidate pipelines, • Partner with hiring managers to define role requirements, establish hiring timelines, and align on candidate profiles, • Conduct candidate screening and interviews; present qualified candidates with clear and organized summaries to hiring stakeholders, • Maintain accurate and up-to-date candidate records and pipeline activity throughout the recruitment process, • Coordinate interviews, facilitate offer processes, and ensure a professional candidate experience from initial contact through onboarding, • 3+ years of full-cycle recruiting experience, preferably within skilled trades, diesel/fleet, industrial, or a related field, • Demonstrated ability to source and engage candidates through direct outreach, including passive candidate populations, • Experience recruiting across both hourly skilled trades roles and salaried management or operations positions, • Strong interpersonal and communication skills with the ability to build effective relationships with candidates and internal stakeholders, • Highly organized with the ability to manage multiple open requisitions simultaneously in a fast-paced environment, • Proficiency with Indeed and direct sourcing methodologies; experience with applicant tracking systems preferredWhy Naumann Hobbs?, • Top Benefits:- Health, Vision, and Dental Insurance, • Health Savings Account with company match, • 401(k), • Life and Disability Insurance, • Paid Time Off and Holidays All qualified applicants will receive consideration for employment based on merit, qualifications, and business needs. You should be proficient in: • Recruiting

Job Description We are looking for a Senior Equipment Technician to join our technical team and serve as a key technical leader. This role requires strong mechanical and electrical aptitude, a passion for problem-solving, and the ability to work independently on complex technical challenges. You will be responsible for diagnosing, repairing, refurbishing, and maintaining a diverse range of coffee equipment while mentoring junior team members and contributing to operational excellence. Key Responsibilities: • Diagnose, repair, and refurbish a wide variety of coffee equipment including espresso machines, grinders, brewers, and related accessories, • Troubleshoot complex mechanical, electrical, and hydraulic issues across multiple equipment types and brands, • Lead technical projects from assessment through completion with minimal supervision, • Develop and document technical procedures, best practices, and quality standards, • Mentor and train technicians and warehouse support staff on technical skills and processes, • Conduct root cause analysis on equipment failures and after-sales issues, • Collaborate with operations and sales teams to provide technical expertise and client consultation, • Test and validate equipment performance to ensure it meets our quality standards before shipment, • Manage technical inventory, parts sourcing, and vendor relationships, • Participate in continuous improvement initiatives to refine refurbishment processes and operational efficiency, • Minimum 4+ years of hands-on technical experience in equipment repair, maintenance, or a related technical field (appliance repair, industrial equipment, HVAC, automotive, etc.), • Strong mechanical and electrical troubleshooting skills, • Proven ability to work independently and manage multiple technical projects simultaneously, • Experience reading technical diagrams, schematics, and service manuals, • Excellent problem-solving skills and attention to detail, • Strong communication skills and ability to explain technical concepts to non-technical team members, • Physical ability to lift and move heavy equipment (50+ lbs), • Commitment to quality workmanship and continuous learning We understand that coffee equipment may be new territory for experienced technicians from other fields. We provide comprehensive training and support to help you develop expertise in coffee equipment while leveraging your existing technical skills. If you're a strong technician who enjoys learning new systems and solving complex problems, we'd love to hear from you. Benefits: • Paid time off, • Professional development assistance and ongoing technical training, • Opportunities for career growth and leadership within a rapidly expanding company, • Goal-oriented work culture providing autonomy and opportunities for advancement, • Work with a diverse range of cutting-edge coffee equipment, • Be part of an international team passionate about coffee and technical excellence

Job Description Company Overview Allen Control Systems (ACS) is a cutting-edge defense startup, founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders' successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. Position Overview Allen Control Systems is seeking an eager, hands-on CNC Support Technician to join our team in a developmental role. This position is perfect for someone with a strong mechanical foundation who is ready to take ownership of shop cleanliness, machine preparation, and basic maintenance. You will work directly under our experienced team, learning the ropes of a high-speed production environment while ensuring our machine shop remains organized and efficient. We are looking for a practical 'fixer' who enjoys hands-on work and is eager to develop their technical skills in CNC operations through direct experience and mentorship. What You’ll Do: * Shop Upkeep: Take pride in maintaining a world-class machine shop by ensuring floors, benches, and machines stay clean and organized to support manufacturing. * Machine Preparation: Assist in daily machine warm-ups, coolant level checks, and chip removal to keep our CNC equipment running smoothly. * Tooling & Assembly: Support the team by assembling workbenches, industrial racking, and basic shop furniture as we scale our facility. * Basic Repairs: Under supervision, perform light mechanical repairs and learn to troubleshoot shop equipment. * Hardware Management: Maintain and organize the inventory of tools, drill bits, and hardware so the shop never slows down. * Material Handling: Assist in receiving materials and moving components between the machine shop and production floor. * Documentation: Keep simple, accurate logs of maintenance tasks and safety checks to ensure a safe workspace. What You'll Need: * Eagerness to Learn: A self-motivated mindset and a genuine interest in CNC machining and defense technology. * Mechanical Aptitude: Comfortable using basic hand tools and power tools; you likely enjoy taking things apart to see how they work. * Reliability: A strong work ethic and the "extreme ownership" needed to manage the physical needs of the shop independently. * Communication: Clear verbal communication and the ability to follow technical instructions accurately. * Physical Readiness: Ability to perform hands-on work in a machine shop and manufacturing environment. * Education/Experience: A high school diploma or equivalent; any exposure to trade schools, shop classes, or hobbyist mechanics is a major plus. What We Offer: * Competitive salary * ACS Equity Package * Health, Dental, and Vision Insurance * Paid Time Off * Mentorship: Direct access to experienced machinists and a front-row seat to the development of cutting-edge robotics. Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #LI-AS1

Job Description Why DH Pace? The DH Pace Company is a family-owned and privately held business with annual sales over $1 billion through 60+ offices located across the continental United States. The Company is an industry leader in the distribution, installation, maintenance, and repair of a complete range of commercial, industrial, and residential door, docking and security products. In 2026, DH Pace is celebrating its 100th anniversary in business. Door Control Services, a DH Pace Company, Inc., is seeking an Automatic Door Technician in Austin, TX. You will be working on a variety of automatic door systems, including: revolving, sliding, folding, and swinging doors. If you have a mechanical and electrical aptitude and have experience with access control, hollow metal, or auto doors, please apply! Job Responsibilities: • Install and/or repair a wide range of automatic doors and door hardware, including swinging, sliding, bi-folding and revolving doors, • Identify opportunities to provide customers with products and services, • Track and maintain job related paperwork and submit in a timely manner, • Operate in safety conscious manner at all times while performing job duties, • High School Diploma/GED preferred, • Prior experience in a similar role or one that required a mechanical and electrical aptitude preferred, • Ability to safely lift up to 100 pounds, • Ability to work at heights and use a ladder, • Must possess valid driver's license and good driving record, • Medical, dental, and vision options: Available on the 1st day of the month following your start date!, • Paid time off plan: 13 days accrued annually during your 1st year; 16 days accrued during your 2nd year!, • Paid Holidays: New Years Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, Christmas Day, • Floating Holidays: Up to 2 floating holidays per year, • Competitive compensation: Including annual performance evaluations!, • 401k retirement plan: Including an employer match!, • Company paid: Life insurance, short-term disability, & long-term disability, • and more! Successful completion of references, employment verifications, background check, drug screen, and driving record (if applicable) required in advance of hire. DH Pace Company, Inc. does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of DH Pace Company, Inc. without a prior written search agreement will be considered unsolicited and the property of DH Pace Company, Inc. Please, no phone calls or emails. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Job DescriptionAbout Base Base is America’s next-generation power company. We’re rebuilding the foundation of modern civilization–electricity–by deploying a vast network of distributed batteries that is transforming today’s fragile, centralized grid into a resilient and abundant system. We are engineers, operators, and creatives solving some of the most complex, interdisciplinary challenges of our time. About the Role As a Maintenance Technician at Base, you’ll play a hands-on role in ramping up our battery production lines - keeping the equipment running at full speed. You’ll perform preventative maintenance, troubleshoot and repair mechanical, electrical, pneumatic, and hydraulic systems, and learn to interpret schematics and technical diagrams. Along the way, you’ll document work, track parts and supplies, and operate safely with hand and power tools in a fast-paced, high-growth factory environment. This is a chance to gain exposure to advanced automation and robotics while building the skills to grow your career in modern manufacturing. What You’ll Do * Perform preventative maintenance (PM) on industrial production equipment * Assist with troubleshooting and repairing equipment issues * Support corrective maintenance on mechanical, electrical, pneumatic, and hydraulic systems * Learn to read and interpret schematics, technical diagrams, and mechanical drawings * Maintain accurate documentation of work performed and help track parts and supplies * Operate safely with hand tools, power tools, and diagnostic equipment in a factory environment What You’ll Bring * 0–2 years of experience in maintenance, mechanical, or electrical work (or technical training/apprenticeship) * Basic understanding of mechanical systems (conveyors, motors, actuators, etc.) and electrical systems (AC/DC circuits, sensors, wiring) * Comfortable using basic hand tools and diagnostic equipment * Strong problem-solving mindset with willingness to learn advanced systems (robotics, PLCs, automation) * Physically capable of lifting up to 50 lbs., standing/walking for extended periods, and performing work that requires bending, squatting, kneeling, or climbing * Reliable, detail-oriented, and able to manage multiple priorities in a fast-moving environment About This Team The Maintenance team is the backbone that enables Base to scale battery production from prototype to thousands of units per year. Every hour of uptime you create directly translates to more batteries reaching customers and accelerating the energy transition. You'll be working on cutting-edge production lines where a single piece of equipment down can halt an entire manufacturing cell—making your ability to diagnose, repair, and prevent failures essential to Base's growth trajectory. This team offers a rare opportunity to build deep technical expertise across mechanical, electrical, and automation systems while seeing the immediate impact of your work: batteries rolling off lines you kept running, production records you helped set, and skills you developed that will define the future of your manufacturing career. Our Values * First Principles Thinking: Question assumptions. Principles > rules. * Operate at Base Pace: Focus on what matters, act quickly, and learn by doing. * Give & Get Feedback: Be direct, be humble, and maintain a growth mindset. * Everyone’s an Owner: Follow through on commitments and own results. * Strong Opinions, Loosely Held: Drive clarity and make calls with imperfect information. * Committed to the Mission: Rebuilding the grid is a big challenge. We work hard because we care deeply about the impact we’re creating. We work in-person. It’s not a 9-to-5. We are all-in. * Fun & Optimism Coexist with Grit: Collaboration and celebration coincide with the intensity of building real things. Do the best work of your life at Base.

Job Description Founded in 1908, Flintco now employs more than 750 people in 10 cities serving clients in healthcare, renewable energy, education, hospitality, sports and industrial. Flintco also self-performs concrete, steel erection and excavation. Nothing matters more to us than the quality and growth of our people. Our teams are smart, humble and disciplined. Flintco is recognized for its commitment to safety and quality, using Lean principles as a guide to continuous improvement. The five guiding principles of our Ethos are: Safety, Integrity, Quality, Accountability and Honesty. We live it every day. Job Summary Responsible for supporting the execution of work in the field to include, supporting field teams with Safety, closeout and punch-list items, and supporting the logistical needs of the field leadership team and trade partners with the day-to-day completion of their assigned tasks. The Field Technician should be a flexible, detail-oriented individual that will thrive performing in a fast-paced, team-oriented environment, with the ability to multi-task, produce quality deliverables, and meet project-based deadlines. Essential Duties and Responsibilities All duties and responsibilities include the following, however, other duties may be assigned. To perform in this position successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Utilize independent judgement, problem-solving ability, and prioritization based on relevant factors, • Good communication skills to articulate challenges and success stories to internal and external clients, • Tracks and assists with closing out project punch list items and/or identified quality issues with completed work, • Supports Trade Partners and the project team with logistical items during work activiteis to include clean up, lay down operations, scheduling, tools, material, and equipment sourcing,, • Informs Superintendent of any quality deficiencies, • Study and analyze construction drawings and shop drawings to confirm or otherwise establish the planned layout dimensions and elevations for the project, • Inform Superintendent of any variations in the project dimensions and elevations, and assist company and subcontractor personnel to (1) understand the layout, and (2) identify the precise locations of the elements being installed, • Other functions as may be required or assigned by Project Superintendent or other authorized individual, including making suggestions of alternative construction methods and techniques, and/or developing interpretations of vague or conflicting information, etc., • Ability to quickly learn new hardware/software tools, • Serve as an ambassador for efforts and services internally/externally and collaborate with project teams, • Travel up to 50% of the time, to various construction sites; plan and execute multiple projects daily None Knowledge/Skills/Ability The ability to work closely with the field team to learn the superintendent roles and responsibilities. Good people and leadership skills directing labor and working with trade partners. Problem solving skills and the ability to work towards finding a solution to the problems. Skill in observing two dimensional drawings or pictures and understanding how they will look in three dimensions as solid objects. Ability to read and interpret construction documents. Experience with VDC technologies such as Revit, AutoCAD, Navisworks, and other similar software systems is a plus. Education High School Degree or vocational training or an equivalent combination of education, technical training and experience. Experience 0-2 years construction field experience or equivalent combination of education and experience. Certificates, Licenses, Registrations None Physical Requirements • Physical demands are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • While performing the duties of this position, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and talk or hear., • The employee is occasionally required to sit and smell., • The employee must occasionally lift and/or move up to 50 pounds., • Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus., • Occasionally, especially when managing multiple projects and during problematic opening and/or closing phases of projects, mental stress can be taxing., • May be required to work long hours for extended periods of time., • Observing (seeing well, either naturally or with correction), as in reading detailed blueprints, drawings, sketches and plans at close proximity. The office provides a safe and healthy work environment, is adequately heated and cooled, is free from exposure and extreme conditions, has appropriate lighting and office furnishings, and is smoke-free and drug-free. While performing the duties of this position in the fabrication shop, warehouse, maintenance shop or at a project site, the employee could be regularly exposed to any number of the following, including, but not limited to: moving mechanical parts; moving machinery; high, precarious places (including, but not limited to, being raised several hundred feet in a bucket); close tight quarters; rough and sloped terrain; fumes or airborne particles; drilling and blasting activities; welding activities; toxic or caustic chemicals; the potential of falling rock; and outside weather conditions. The employee may be occasionally exposed to risk of electrical shock and vibration. The noise level in the work environment is generally loud.

Job Description Field Service Technician II (Heavy Equipment & Maintenance) Location: Creedmoor, TX | Work Type: Full-Time | Pay: $18.00–$23.00/hour, depending on experience Diagnose. Repair. Keep Operations Moving. Are you a skilled technician who takes pride in solving mechanical problems, staying organized, and keeping equipment running at peak performance? Do you enjoy working independently in the field with the support of a top-tier team behind you? This is an excellent opportunity for experienced maintenance professionals ready to grow their careers with a company that values craftsmanship, safety, and reliability. If that sounds like you, this Field Service Technician role could be a perfect fit! • Why This Opportunity?Hands-On Work – Diagnose and repair heavy-duty equipment in the field—no desk job here., • Growth Potential – Opportunities available for both intermediate and advanced technicians., • Strong Pay – Earn $18.00–$30.00/hour depending on experience and certification level., • Tool Ownership – Work with your own tools (or receive support acquiring them)., • Daily Variety – No two days are the same—solve real problems, make real impact. What You’ll Be Doing:As a Field Service Technician, you'll be out in the field ensuring equipment is safe, fueled, and functioning. Picture this—each day you: • Diagnose and repair company equipment and machinery onsite., • Fuel and lubricate equipment at required intervals (typically every 8 hours)., • Perform technical inspections and preventive maintenance tasks., • Complete and document repairs using internal systems for time tracking and parts management., • Coordinate with other maintenance personnel and departments to ensure efficiency., • Maintain service trucks—keep them clean, stocked, and ready for action., • Follow safety protocols, wear PPE, and report or correct any unsafe conditions immediately., • What You Bring:At least 2 years of industrial/heavy equipment maintenance experience, OR, • A technical degree and 1+ year of experience, OR, • Relevant military service in a related field., • Ability to communicate clearly in English (written and verbal)., • Proficiency with computer-based repair diagnostics., • Ownership of tools or willingness to purchase them., • Preferred Qualifications:ASE Certifications in Diesel Automotive, • Training certificates from John Deere, Caterpillar, Case, • Mine Safety & Health Administration (MSHA) certification, • Texas Commercial Driver’s License (CDL), • Required Licenses & Driving Requirements:Valid Texas Class C Driver’s License, • Clean driving record with 5 years of documented history (MVR required), • Compensation:Field Service Technician II: $18.00–$23.00/hour Your Next Move:Are you ready to take your mechanical skills into the field and keep essential equipment running strong? Apply today and join a team that powers great work through expert service. Who is Bronwick?Bronwick helps people like you find the best jobs in the Stone and Construction industries. We handle hiring for over 100 top companies nationwide. We know this industry and we know how to help you advance. Apply now and let’s take the next step together!

Job Description NITROcrete, a Cryogenic Industrial Solutions company, is looking for a Field Operations Technician to join our team in the Austin, TX area to support customer sites throughout the South Central region. NITROcrete provides innovative concrete temperature control technology to the ready-mix concrete industry. The Field Operations Technician is responsible for the safe and timely installation, maintenance, service, and calibration of NITROcrete Systems and/or Industrial Gas Systems across the South Central region and the US. Technicians ensure the proper function of systems while maintaining excellent communication with HQ, regional management, and customers. ESSENTIAL DUTIES & RESPONSIBILITIES An employee must be able to perform the essential duties and responsibilities with or without reasonable accommodations. Other duties may be assigned. • Perform and supervise the installation and service of NITROcrete and/or Industrial Gas systems at customer locations, • Accommodate and work with customer’s site configuration as part of installation, • Weld and/or braze cryogenic piping and systems as needed, • Resolve issues and problem-solve during installation and maintenance of NITROcrete and/or Industrial Gas systems, • Observe, test and verify the installation meets specifications, • Assist in calibrating and commissioning new systems, • Understand and follow project scopes and timelines, • Conduct job safety analysis prior to installation and ensure safe work procedures are followed throughout each project, • Provide customer support after installation to troubleshoot, service and maintain the system, • Support and supervise contractors as they install or perform work on NITROcrete and/or Industrial Gas systems, • Read, understand and follow equipment installation instructions and wiring schematics, • Create, update and manage service tickets, • Locally source materials and supplies, such as tools. Equipment, or replacement prats when required, • Adherence to all company policies including professionalism and safe work practices May indirectly supervise less experienced technicians or contractors. MINIMUM QUALIFICATIONS Education & Experience High school diploma or general education degree (GED) and 3-5 years’ experience in ready-mix production/maintenance, construction, industrial gas/ cryogenics or related field. Core Competencies • Clean Safety record, • Must be willing to travel as needed (up to 75%). This entails travel across the US via company vehicle and airline., • Mechanical, plumbing and/or electrical experience preferred, • TIG welding and copper brazing experience preferred, • Must be willing to travel irregular hours when required, • TIG welding and copper brazing experience preferred, • Ability to guide, direct and lead others, • Excellent problem-solving skills, • Ability to work in small teams, and independently and efficiently with little supervision, • Basic computer knowledge required (email (Gmail), Microsoft office, etc) Mathematical Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Ability to calculate volume. Reasoning Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardizations exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills Ability to use a laptop, MS Office Software, and Internet Software Education High school or equivalent (Preferred) Work Location On the road Powered by JazzHR gnGtp5ubWM

Job Description ALARM CONSTRUCTION TECHNICIAN JOB DESCRIPTION Job Responsibilities include but are not limited to: • Installation of fire alarm systems in residential, commercial, and industrial buildings, • Installation, service, and trouble-shooting of fire alarm systems along with all its related equipment, • Be a leader: oversee, direct, and delegate appropriate tasks to fulfill project completion deadlines, meet scheduling requirements, and exceed the goals established by the fire alarm manager, • Ensure project results are achieved within financial and productivity budgets, • Accurately complete, execute and process paperwork/electronic or paperless required by the office and corporate management systems, • Conduct/coordinate necessary testing of the system Ensure required certifications are complete, • Instruct and train Helpers, apprentices, or other personnel in the basic process of service, repair and/or system installation, • Coordinate the daily work schedules and direct the daily tasks/productivity of assigned employees, • Maintain inventory on vehicle, • Believe In, Live, and Support Our Mission Statement, Core Values and Business Plan Daily, • Safety First, • Ensure timely and complete submittal of JSAs, Toolbox Talks, Audit Forms, etc., • Ensure timely and accurate Incident and Accident Reporting, • Hold yourself accountable for all Safety Initiatives, • Hold yourself accountable for Safe Driving of Company Vehicles, • Ensure awareness and support of Stop Work Authority, • Complete all Training Requirements – Safety, Certifications, etc., • Submit accurate Timesheet – job numbers/names, OT and travel pay, completed on time, etc., support transition to Electronic timesheet submittal, • Ensure all required documents are complete, accurate and professional, with required signatures, • Ensure proper Inventory Management – review, update, and approve packing slips – submitted timely, proper material management, • Ensure proper Maintenance and care of equipment – trucks, lifts, tools, etc., • Keep jobsites clean and organized, • Ensure Production Efficiency – awareness of budget vs. actual labor hours and proactive communication with superintendent, • Support and Ensure Adherence to Company SOPs – Purchase Orders, Change Orders, etc., • Timeliness – at the job on time; attendance; communication with supervisor; paperwork, • Ensure Customer Satisfaction and respond to Customer Satisfaction Survey feedback improvement opportunities, • Maintain Quality Control i.e. reduce the need for return trips and warranty work, • Maintain a Professional appearance, • Communicate effectively and professionally within the department and with internal and external customers, • Teamwork – maintain positive interactions within your team, local office, etc., • Actively Participate in required team meetings, • Must have knowledge of fire alarm systems.., • Understand fire alarm installation requirements., • Ability to properly read fire alarm blueprints, submittals and operation/product manuals., • Minimum education of High School Diploma or Equivalent, • Forklift and scissor lift certification, preferred, • FAL required., • Ability to take direction from upper management, • Accurately complete and maintain all paperwork, • Maintain vehicle and tools as per company policy, • Must have valid state driver's license and good driving record, • Self-motivated, Ambitious, Interactive, Communicative, Detail-oriented, Organized, • Valid driver’s license and clean driving record, • Knowledgeable with NFPA, NEC and local applicable codes and all necessary codes, • Experience with powered hand tools, hand tools test equipment, multi-meter usage, digital analyzer and commissioning devices, • Ability to interact and communicate in a professional and positive manner with other trades, customers, project managers, county officials, general contractors, etc., • Demonstrate positive team work and ability to be a team leader and mentor, • Maintain a clean and safe work environment, • Comply with all company safety practices and the safety handbook, • Complete projects in a timely manner while providing the highest standard of quality work and customer satisfaction

Job DescriptionDescription:PLC Technician (Full-Time) Circuit of The Americas (COTA) is a 365-entertainment destination for world-class events located in Austin, TX. The sports and entertainment portfolio at COTA is unmatched in the country with Formula 1 US Grand Prix, NASCAR and MotoGP attracting global fans during championship races on the famed Circuit and Live Nation producing over 30 headline concerts every year at the Germania Insurance Amphitheater. Opening in 2026, COTA’s amusement park, COTALAND, is on over 30-acres featuring two first of their kind Roller Coasters and 30 rides. Job Description: We are seeking a skilled Ride PLC Technician to install, maintain, and troubleshoot Programmable Logic Controller (PLC) systems for amusement park rides and attractions. This role ensures the safety, reliability, and efficiency of ride control systems by performing inspections, diagnostics, and repairs on electrical and automation components. This is an onsite, full-time role at COTA. Requirements: Requirements & Essential Functions: • Maintain, troubleshoot, and repair PLC-based ride control systems to ensure optimal operation and guest safety., • Conduct routine inspections and preventive maintenance on ride electrical and automation systems., • Modify and update PLC programs as needed to improve ride performance and reliability., • Work with electrical schematics, ladder logic diagrams, and HMI (Human-Machine Interface) systems., • Diagnose and resolve faults in control systems, including sensors, motors, VFDs, and safety circuits., • Collaborate with ride operators, and maintenance teams to ensure smooth operation., • Document maintenance activities, programming changes, and system upgrades., • Adhere to all safety regulations and park policies regarding electrical and automation work., • Assist with new ride installations, commissioning, and system integrations. Knowledge, Skills, and Abilities: • Strong interpersonal skills; can effectively communicate and relate to all levels within and outside the organization; create and build positive and productive relationships., • Drives the team and the organization for results in order to improve bottom line performance; able to make timely or planned decisions appropriate to the circumstances or situation., • Ability to make tough decisions, gains input from others and moves decisions forward in the organization., • Responds quickly and effectively to changing trends and circumstances; embraces change and welcomes fresh perspectives; learns from past mistakes and adjusts accordingly., • Ability to manage appropriate steps to get projects completed; has strong abilities to organize people and processes; can create a plan for resourceful workflow., • Can be trusted to act in a manner that is truthful and values direct, honest communication at all levels of the organization. Required Qualifications • Associate’s degree or technical certification in Electrical Engineering, Automation, or a related field (or equivalent work experience)., • Experience working with PLCs (Allen-Bradley, Siemens, or similar) in an industrial or amusement park setting., • Proficiency in troubleshooting electrical systems, sensors, and motor controls., • Ability to read and interpret electrical schematics and wiring diagrams., • Strong problem-solving skills and ability to work under pressure in a fast-paced environment., • Understanding of safety standards (NFPA 70E, OSHA, ASTM F24) for ride systems is a plus. Physical Demand & Work Environments: • Ability to stand, sit, use of hands to handle, or feel, reach with hands and arms., • Ability to squat, bend, twist, push/pull., • Ability to stand/walk for long periods., • Specific vision abilities required by this job include close vision and distance vision., • Work in extreme environments outdoors throughout the year., • The noise level in the work environment is usually moderate but can be loud during events., • Must be comfortable working in outdoor conditions, at heights, and in confined spaces., • Ability to work varied shifts, including nights, weekends, and holidays., • Must be able to lift up to 50 lbs and perform physical tasks as required. Salary commensurate with experience. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job. EQUAL EMPLOYMENT OPPORTUNITY: COTA strongly supports equal employment opportunity for all applicants regardless of race, color, religion, sex, gender identity, pregnancy, national origin, ancestry, citizenship, age, marital status, physical disability, mental disability, medical condition, sexual orientation, genetic information, or any other characteristic protected by state or federal law

Job Description Job Title: Electrical & Instrumentation Technician (Journeyman Required) Location: Austin, TX (Onsite) Employment Type: Contract-to-Hire (6 months) Schedule: Day shift, Monday–Friday (10–12 hour shifts, starting ~7:00 AM) Overview We are seeking experienced Electrical & Instrumentation Technicians to support ongoing equipment upgrades and maintenance within a high-tech manufacturing facility in Austin. This role focuses on electrical troubleshooting, instrumentation support, and panel rebuilds in a fast-paced industrial environment. Key Responsibilities • Troubleshoot electrical, instrumentation, and control systems across the facility, • Perform panel rebuilds, including rewiring communication cabinets and drive systems, • Diagnose and repair issues involving switchgear, instrumentation, and process equipment, • Read and interpret electrical schematics and technical drawings, • Troubleshoot I/O, remote I/O, and industrial communication systems, • Active Journeyman Electrical License (required), • Strong experience with 480V+ electrical systems and higher voltage equipment, • Hands-on experience with industrial instrumentation (e.g., RTDs, thermocouples, flow meters, level and pressure devices), • Experience with switchgear systems, including gas-insulated switchgear, • Proficiency in reading electrical prints and schematics, • Experience with panel wiring, rebuilds, and electrical cabinet workCompany DescriptionBlueWave specializes in recruiting high-performing team members for technology, marketing, federal services, and leadership roles. We’re aggressive hunters – but only of talented people – and provide comprehensive staffing support for recruiting, hiring, and onboarding permanent and contract employees. BlueWave is headquartered in Downtown Orlando, Florida with the flexibility to build teams nationally. With our boutique and personal approach, we get the right people in your company quickly without sacrificing quality.BlueWave specializes in recruiting high-performing team members for technology, marketing, federal services, and leadership roles. We’re aggressive hunters – but only of talented people – and provide comprehensive staffing support for recruiting, hiring, and onboarding permanent and contract employees.\r\n\r\nBlueWave is headquartered in Downtown Orlando, Florida with the flexibility to build teams nationally. With our boutique and personal approach, we get the right people in your company quickly without sacrificing quality.

Job Description Hyliion is committed to creating innovative solutions that enable clean, flexible and affordable electricity production. The Company's primary focus is to develop distributed power generators that can operate on various fuel sources to future-proof against an ever-changing energy economy. Job Purpose The Field Service Technician is responsible for supporting the deployment, commissioning, and ongoing service of Hyliion's KARNO Power Module through hands-on assembly training and field-based service execution. This role ensures reliable system performance by performing installations, startups, troubleshooting, maintenance, and customer support across diverse operating environments. By serving as a technical liaison between the factory, engineering teams, and customers, the technician helps deliver safe, efficient, and high-quality distributed power solutions. Duties and Responsibilities • Training & Assembly Phase (First 4–6 Months), • Assemble mechanical and electromechanical subsystems of the KARNO Power Module, • Develop a working knowledge of system architecture, operating principles, controls, and safety requirements, • Support factory testing, inspections, and quality verification activities, • Collaborate closely with engineering and manufacturing teams to understand design intent and system requirements, • Follow detailed build documentation, work instructions, and inspection checklists, • Assist with fault diagnosis, repair, and reinstallation activities as needed, • Field Service & Deployment Phase, • Travel to customer and partner sites to support mechanical and electrical installation activities, • Perform KARNO Power Module system commissioning, startup, and acceptance testing, • Conduct preventive, corrective, and troubleshooting maintenance, • Diagnose mechanical, electrical, and controls-related issues using test equipment, remote diagnosis support, and software tools, • Document service activities, inspection findings, and corrective actions accurately and timely, • Prepare detailed service reports outlining work performed, diagnostic results, and customer feedback; coordinate closely with service engineering and factory quality teams, • Interface professionally with customers, contractors, and internal engineering teams, • Participate in on-call or rotating support schedules to support deployed systems, as required, • Maintain service tools, service vehicles, and spare parts inventory to ensure timely and effective issue resolution, • Additional duties and responsibilities as assigned and/or needed. Qualifications Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Qualifications include: • Education, Experience and Certifications, • Minimum of 3 years of hands-on experience in field service, mechanical assembly, maintenance, or repair of industrial equipment, • High school diploma or equivalent required; additional technical training, vocational education, military experience, or equivalent hands-on background preferred, • Experience using and maintaining hand tools, torque tools, and diagnostic equipment, • Experience supporting power generation equipment, generators, engines, or energy systems preferred, • Field commissioning or startup experience for industrial or energy equipment preferred, • Skills and Abilities, • Strong mechanical aptitude with a working knowledge of electrical systems, controls, and sensors, • Proven ability to troubleshoot and resolve complex equipment issues in field environments, • Ability to read and interpret mechanical drawings, electrical schematics, wiring diagrams, and service documentation, • Ability to document work performed clearly and accurately using digital tools, • Strong communication skills and the ability to work effectively with customers and cross-functional teams, • Familiarity with preventive and predictive maintenance practices, • Comfortable working independently in the field with remote engineering support Role Classification and Working Conditions This is an hourly, non-exempt-level position. This position typically works in a production/assembly/engineering lab environment. Overtime may be required. Physical/Other Requirements • Ability to stand for extended periods and perform hands-on mechanical work, • Ability to lift and maneuver components weighing up to approximately 50 lbs, • Ability to work safely in industrial, outdoor, and construction-adjacent environments, • Willingness to wear required personal protective equipment (PPE) and adhere to all safety protocols, • Willingness to travel extensively (50–75%), including overnight and multi-day site visits, • Valid driver's license with the ability to safely operate company vehicles We are not accepting candidates who require sponsorship for this position at this time. Benefits: • Medical Plans, with PPO or HDHP options, • Dental Plans, with buy-up option, • Vision Plan, • Life Insurance and Accidental Death & Dismemberment Plans, with buy-up options, • Short Term Disability, paid for by the company, • Long Term Disability, paid for by the company, • Flexible Spending Accounts (FSA), • Health Savings Account (HSA), • 401k/Roth 401k, • Voluntary Accident Plans, • Voluntary Critical Illness Plans

Job Description Job Overview The BAS Field Technician II installs, programs, troubleshoots, and maintains building automation and control systems with minimal supervision. This role serves as a technical resource for complex system issues, supports project commissioning, and ensures that automation systems meet operational, safety, and efficiency standards. Essential Duties and Responsibilities • Independently install and commission BAS hardware, software, and networks for commercial/industrial projects., • Program controllers and user interfaces; adjust system logic to optimize performance., • Diagnose and resolve complex issues with sensors, actuators, controllers, and system integrations., • Perform preventive maintenance and system upgrades, ensuring reliability and compliance., • Support system commissioning and functional performance testing for new projects., • Collaborate with engineers, project managers, and subcontractors to meet deadlines and specifications., • Train and mentor Technician I staff in installation and troubleshooting procedures., • Document service activities, system changes, and customer interactions accurately., • Provide on-site technical support and build positive customer relationships., • Associate’s degree or technical certification in HVAC, Electrical, or Controls (or equivalent work experience)., • 3–5 years of BAS or HVAC controls experience, including programming and commissioning., • Proficiency with at least one major BAS platform (e.g., Siemens, Johnson Controls, Honeywell, Trane, Schneider, Delta)., • Strong troubleshooting skills with HVAC equipment and building systems integration., • Working knowledge of control theory, DDC systems, and energy management strategies., • Basic networking skills (IP addressing, routers/switches) preferred., • Effective communication and customer service skills., • Ability to lift and carry up to 50 lbs., • Ability to work in various environments, including confined spaces, attics, crawlspaces, and at heights., • This is a field-based position requiring travel to commercial, institutional, or and industrial buildings., • Health Insurance: Employer covers employee cost; dependents paid by the employee., • Vision and Dental Insurance: Employee-paid., • Basic Life Insurance: Employer-provided coverage up to $50,000., • Health Reimbursement Account (HRA): Company pays a portion of the medical deductible., • 401(k) Plan: 4% employer match after 1 year., • Ancillary Insurance options: disability, critical illness, hospital indemnity, accident and more., • Paid Time Off (PTO): 15 days annually., • Holidays: 9 company-paid holidays., • Bonus: Eligibility for annual bonus., • Learning: Professional development and career growth opportunities.

Job DescriptionOpenwork is currently engaged in a search to find a Service Technician for a leading industrial equipment manufacturer in North Austin. In this role, you'll work with a team dedicated to servicing high-performance vacuum equipment used in industries like semiconductors and solar. You’ll be repairing and testing equipment such as turbo molecular pumps and power supplies, ensuring they meet performance and safety standards. As a Service Technician, you’ll be responsible for: • Repairing, testing, and troubleshooting turbo molecular pumps, power supplies, and other vacuum equipment, • Following strict safety protocols and wearing proper PPE at all times, • Cleaning and decontaminating equipment according to company procedures, • Accurately documenting service work, photos, and reports for internal review, • Supporting inventory management and maintaining service parts, • Assisting in preventive maintenance on shop tools and equipment, • Keeping work areas clean and organized, • Providing occasional support with shipping/receiving and other general warehouse tasksWhat you’ll need:, • High school diploma or equivalent, • Experience in a warehouse, manufacturing, or technical repair environment preferred, • Mechanically inclined and comfortable using hand and power tools, • Ability to lift up to 50 lbs and stand for extended periods, • Basic computer skills and ability to follow detailed procedures, • Forklift experience is a plus (or willingness to be trained), • Strong attention to detail, team player, and safety-first mindsetPerks:, • Competitive hourly pay: $18–$24/hr depending on experience, • Career growth, • Vision, medical, and health benefits available, • Paid training and supportive team environment

Job Description Job Summary: The Field Service Technician provides face-to-face customer service located at an off-site location and is responsible for minor troubleshooting, diagnosing, repairing, and reconditioning of various light and heavy industrial rental equipment. The incumbent in this position is expected to model the following practices daily: 1) Demonstrate alignment with the company's mission and core business values; 2) Collaborate with key internal/external resources.3) Participate in ongoing self-development. What can Texas First Rentals offer you? • A competitive salary, commensurate with your experience and competencies., • A comprehensive and robust benefits program that includes complete health care, 401(k) matching & Profit-Sharing plan (ROTH and traditional), paid holidays, and a front-loaded PTO program., • A Tuition Reimbursement program to support the pursuit of accredited college courses., • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Performs minor repairs and minimal troubleshooting offsite with minimal supervision, • Performs minor troubleshooting and minimal diagnoses of equipment malfunctions and failures, • Removes and installs parts, disassembles and assembles basic components, • Tests and verifies proper operation of all repairs, • Prepares and completes all job-related documents, writes service reports, orders parts, and maintains clear customer records; in addition, accesses databases required to complete job, • Operates equipment and vehicles with possession of all necessary licenses and certificates, • Maintains service vehicle inspection records, daily inspections and driver logs as required by the Department of Transportation, • Adheres to contamination control and HAZMAT rules and regulations, • Maintains all company equipment, tools, and vehicle in a good, clean, and working order, • Communicates job progress to supervisor and customer as needed, • Completes assigned jobs and task to meet flat rate time and re-work standards, • Works overtime as required by workload and customers’ needs, • Completes all assigned Technician Training Path courses and safety training in a timely and proficient manner, • Projects professionalism with both internal and external customers, including personal appearance; may be relied upon to act as a mentor to lower-level Technicians, • Requires regular and punctual employee attendance, • Knowledge of safe work procedures and practices, • Basic knowledge of equipment and tools, including their designs, uses, repair, and maintenance, • Basic knowledge of hydraulics, transmissions, engines, undercarriage, and electrical, • Demonstrates proficiency with current computer software, related hardware, and basic knowledge of machine electronic systems, • Exceptional skills in customer service, • Basic diagnostic and trouble-shooting skills, • Planning and organizing skills to prioritize and plan work activities; uses time efficiently; plans for additional resources, • Operation and control skills of equipment or systems, • Equipment selection skills to determine the kind of tools and equipment needed to do a job, • Ability to communicate clearly and effectively, both verbally and in writing, • Ability to operate a crane and forklift, and obtain required certifications/licenses, • Ability to meet deadlines and work under fast-paced, time constraining circumstances, • Ability to operate hand tools, power tools, pneumatic tools, and equipment used in mechanical repair, • More than one year of heavy equipment experience required; three or more years preferred, • High school diploma or equivalent preferred, • MSHA certification preferred, • Air conditioning certification preferred, • Valid Driver’s license required, • Ability to obtain a valid Commercial Driver's License (CDL) and must have an acceptable driving record, • Must be able to move objects, and use abdominal and lower back muscles to provide support over time without fatigue, • Frequently moves materials or equipment weighing up to 80 lb, • Constant movement and use of limbs; this position requires good manual dexterity, coordination, and stamina, • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipment, • Be able to maneuver safely and work underneath equipment, • Requires wearing common protective or safety equipment, • Regularly works outdoors around moving mechanical parts and noise level may be loud at times, • May be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and humidity, • Exposure to small quantities of chemicals, dust, steam, high-pressure water, and high speed rotating equipment, • Required to perform work in cramped spaces and/or high places Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #LI-TFR

Job Description Entry Level Field Service Technician (Mixed Shift)Job Location: Austin,TX Position Type: Full Time Pay- $20Ample Opportunities for Overtime and Paid Training!Job Summary:We are looking for a highly skilled and detail-oriented Field Service Technician to join our team. The ideal candidate will be responsible for performing inspections, repairs, and maintenance on chillers and related equipment, ensuring smooth operations at both on-site and off-site locations. This role requires a strong focus on tracking failure information, part inventory, and providing necessary documentation and reports. The candidate must be proactive in performing routine checks, adhering to safety standards, and assisting with the training and development of new staff on technical procedures.Ideal candidates are recent Highschool/technical school graduates or those looking to build a new career in the field service or semiconductor industry. The job includes extensive paid training under experienced engineers and semiconductor professionals. We are looking for people who are mechanically inclined and are passionate about hands-on engineering and technical building.Key Responsibilities: • Failure Tracking & Documentation:, • Review and track failure information, serial numbers, and part usage., • Prepare Field Service Reports (FSR) and maintain accurate records., • Verify and confirm tracking sheets for proper data integrity., • Chiller & Equipment Management:, • Monitor spare or repair needs for chillers at the testing station on a weekly basis., • Perform weekly inspections of chiller cages and bi-weekly inspections of tools., • Update spare chiller inventory on a weekly basis and part inventory on a daily basis., • Training & Safety:, • Provide training on part replacement procedures to staff members., • Conduct weekly general safety training sessions and monthly refresher courses., • Ensure adherence to safety standards and operational guidelines., • Coordination & Analysis:, • Coordinate off-site repairs and monitor the status of chillers., • Conduct on-site testing procedures and provide updates on chiller conditions., • Analyze performance data and prepare necessary documentation for operational improvements., • Standard Operating Procedures (SOPs):, • Develop, create, and update Standard Operating Procedures (SOPs) to ensure consistent quality and safety protocols are followed.Required Qualifications:, • High school diploma or equivalent; technical certifications or relevant training preferred., • Strong analytical and problem-solving skills., • Ability to work independently and as part of a team., • Familiarity with tools and equipment used in the inspection, maintenance, and repair of industrial equipment., • Excellent organizational and time management skills., • Coachable attitude to receive training., • Ability to communicate clearly and effectively, both written and verbally., • Strong attention to detail and commitment to high-quality work.Preferred Qualifications:, • Previous experience with chiller systems or HVAC systems., • Knowledge of safety protocols and regulatory standards for equipment maintenance., • Experience with IT or diagnostics software., • Experience with inventory management and part tracking., • Highschool shop class or carpentry class.Physical Requirements:, • Ability to lift and carry heavy equipment or tools (up to 50 lbs)., • Willingness to work in varied environments, including outdoor and industrial settings., • Comfortable with standing, kneeling, and moving equipment as needed.Work Schedule:, • 4 and 3 days a week alternating

Job Description Final Test & Quality Assurance TechnicianJoin a Cutting‑Edge Team in the Semiconductor Industry!🔍 About the Role As a Final Test & QA Technician, you’ll be the last line of defense ensuring high‑precision gas panels, circuits, and assemblies are built and performing flawlessly. You’ll work with specialized equipment, perform advanced testing, and be trusted to make technical decisions that keep production running at the highest standard. This role is perfect for someone who thrives in a hands‑on, high‑tech environment and enjoys problem‑solving with autonomy. 🛠️ What You’ll Do • Operate and configure specialized test equipment, • Perform setup, calibration, functional testing, and troubleshooting, • Develop & refine test methods, specifications, and procedures, • Run helium leak tests and interpret results, • Work from gas flow schematics and complex technical drawings, • Execute advanced testing with minimal supervision, • Provide progress updates and report quality concerns✔️ Required Skills & Experience, • 3+ years functional or final testing experience (gas panels a major plus), • Hands‑on helium leak testing experience, • Ability to read gas flow schematics and interpret component layouts, • Proficiency in Microsoft Office & Outlook⭐ Highly Preferred, • Experience testing gas panels for AMAT, UCT, or similar companies, • Strong knowledge of flow control devices, mechanics, and MRP concepts, • Ability to read complex engineering drawings, • Excellent verbal & written communication, • Strong judgment and problem‑solving skills, • Ability to lift up to 50 lbs and perform standard physical tasks🌟 Why You’ll Love Working Here, • Work in the rapidly growing semiconductor industry, • Enjoy a laid‑back, friendly, and supportive culture, • Be part of a tight‑knit team (approx. 15 people per shift), • Great work‑life balance + opportunities to grow your skill set, • A clean, modern cleanroom environment with state‑of‑the‑art equipment🕒 Shifts Available, • 1st Shift: 6:00 AM – 2:30 PM, • 2nd Shift: 2:30 PM – 11:00 PM Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Austin,TX. Application Deadline This position is anticipated to close on Apr 8, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Overview The Building Automation Systems Field Technician is responsible for installing, programming, commissioning, and servicing building automation and control systems in commercial and industrial facilities. This role ensures that HVAC, lighting, energy management, and related systems operate efficiently, reliably, and in accordance with project specifications and customer requirements. Essential Duties and Responsibilities • Install, program, troubleshoot, and maintain building automation systems (BAS) and associated low voltage controls., • Service HVAC control systems, sensors, actuators, and controllers., • Configure and calibrate system software and programmable logic controllers (PLCs)., • Read and interpret electrical schematics, building plans, and technical manuals., • Conduct preventative maintenance, system diagnostics, and performance optimization., • Collaborate with facility managers, contractors, and engineers to resolve system issues and ensure project completion., • Maintain accurate service records and documentation., • High school diploma or equivalent; technical degree or BAS-related certifications preferred., • Experience with building automation, HVAC controls, or low voltage systems., • Proficiency with BAS programming, troubleshooting, and calibration., • Strong understanding of electrical systems, sensors, and network communications (BACnet, Modbus, etc.)., • Effective problem-solving, analytical, and communication skills., • Ability to lift and carry up to 50 lbs., • Ability to work in various environments, including confined spaces, attics, crawlspaces, and at heights., • This is a field-based position requiring travel to commercial, institutional, or and industrial buildings., • Health Insurance: Employer covers employee cost; dependents paid by the employee., • Vision and Dental Insurance: Employee-paid., • Basic Life Insurance: Employer-provided coverage up to $50,000., • Health Reimbursement Account (HRA): Company pays a portion of the medical deductible., • 401(k) Plan: Eligible after 1 year of service, with a 4% employer match., • Ancillary Insurance options: disability, critical illness, hospital indemnity, accident and more., • Paid Time Off (PTO): 15 days annually., • Holidays: 9 company-paid holidays., • Bonus: Eligibility for annual bonus., • Learning: Professional development and career growth opportunities.

Job Description Job Summary Company NextGen Security, LLC Location Austin, TX Industries Security and Surveillance Job Type Full Time Employee Years of Experience 5+ years of installation experience in security industry Career Level Experienced (Non-Manager) Exemption Non-Exempt Senior Technician About the Job What we’re looking for: We are seeking an experienced electronic security installation technician to join our fast growing and dynamic team. What you’ll be doing: This position will have multiple roles ranging from: project oversight in the field, system programming, project activation and commissioning, installation of field devices, and most importantly, servicing of high-end integrated security devices. Extensive weekly travel will be required. What you bring to the table:  Minimum of 5 years of experience with installing and maintaining: • Enterprise-level access control systems  Superior problem solving and communication skills.  Work independently with minimal supervision.  Familiarization with local electronic security codes and industry standards. Understanding and ability to work safely in a chemical plant environment.  Experience with AutoCAD, Visio, MS Project and other Microsoft products. Preferred  Access Control System Vendor Certifications in Software House, Genetec, ProWatch and/or Lenel.  Video Management System Vendor Certifications in Genetec, OnSSI, MaxPro, Avigilon, and/or Milestone.  Experience in computer operating systems, network design and implementation. TWIC Cardholder. What we bring to the table:  Compensation based upon background and experience.  Company vehicle.  Full benefits package.  Vacation.  Cellphone Allowance. We are an equal opportunity employer and drug- free workplace. Pre-employment drug screens and background checks will be conducted. Employees are subject to appropriate routine drug screens, based on job classification. Application Process · Please submit your resume, references and your requested salary range when applying for this position to . More About Us NextGen Security is an electronic security systems integrator that offers commercial and industrial companies best in class industry knowledge, engineering design, implementation, management and on-going maintenance services. Our company accomplishes this by hiring only the most experienced and best-qualified talent the security industry has to offer. Management team and staff members have 10-25 years of commercial and industrial security industry expertise with single site, multi-facility, plant-wide, campus-wide, regional, national and international security projects. If that wasn’t convincing enough, check out what our employees say about working at NextGen: Notice To Employment / Recruitment Agents Employment / Recruitment agents may only submit candidates for vacancies only if they have written authorization to do so from NextGen Security’s HR department. Any agency candidate submission may only be submitted to positions opened to the agency through openings available via NextGen Security’s website. NextGen Security will only pay a fee for candidates submitted or presented where there is a contract communication in place between the Employment / Recruitment agents and NextGen Security, and only if the candidate is submitted via approval from NextGen Security’s HR department. Candidates submitted or presented by Employment / Recruitment Agents without a full approval from NextGen Security’s HR department shall not be deemed to form part of any Engagement for which the Agency may claim remuneration.

Job Description About Robert Bosch GmbH Headquartered in Germany, Robert Bosch GmbH is a premier global supplier with four primary business sectors: Automotive Technology, Industrial Technology, Consumer Goods, and Energy and Building Technology. Over 400,000+ associates generate sales of over €90 billion. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.” Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The special ownership structure guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant investments in safeguarding its future. In North America, Robert Bosch LLC supplies automotive original equipment and aftermarket products, industrial drive and control technology, power tool, security and building technology, thermo-technology, household appliances, solar energy, healthcare, and software innovations. Bosch established its regional presence in North America in 1906 and now employs 41,000 associates in more than one hundred locations. Bosch Building Technologies Integrator Business The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects Bosch started its Integrator Business in North America through the acquisition of Climatec in 2015. Climatec expanded Bosch’s role as a comprehensive supplier of energy, building automation and security solutions. Climatec is recognized in the building industry as an independent single-source integrator of critical building systems including energy services, building automation and security & life safety in the U.S. market. The company provides consulting, planning, implementation and 24/7 remote management. Climatec is active in several market segments and industries including data centers, commercial real estate buildings, and federal, state, and local government. Climatec has operated as an independent entity, maintaining its offices in Arizona, California, Nevada, Texas, New York, and New Jersey. Climatec continues to represent and integrate numerous leading manufactures’ product lines across its wide range of services, including Bosch products. In 2023, Bosch acquired Canadian-based security integrator Paladin Technologies. Merging Paladin Technologies and Climatec will significantly expand Bosch’s Integrator Business in North America. Today the combined entity of Bosch Building Technologies (previously Climatec and Paladin Technologies) represents over $800M in revenues and 2800 associates. Utilizing the strengths of both companies, Bosch offers its customers a complete portfolio of networked and efficient energy, building automation and security solutions. Job Summary: This Lead Technician position will collaborate with the Project Team to schedule and dispatch to customer sites for install, break/fix requests, preventative maintenance as well as small move, add, and change (MAC) work. Responsible for documentation & reporting of findings & solutions for each service job performed. Strong communication skills & discipline, internally and externally, are necessary to be successful at providing an excellent customer experience. Collaboration with the Client Services Team is vital and critical to the success of this position. Responsibilities: • Coordinate equipment & company vehicle resources as required to effectively manage projects, • Review, modify and red line job documentation for assigned projects when applicable, • Perform work in a professional manner and in accordance with company established best practices, • Maintain a professional appearance and attitude, • Maintain a clean and orderly job site, • Adhere to all applicable safety rules and regulations, • Review materials options and verify count accuracy, • Facilitate the delivery of staged materials to the job site, • Communicate & coordinate with the PMO Team regarding schedule, open items, & job status, • Communicate with the PMO Team on the needed job components and materials, • Commissioning of trade specific systems including, but not limited to:, • Device & cable testing, • System functionality testing, • System settings/configurations, • Firmware updates, • User acceptance testing, • System documentation, • Occasional light travel may be required, • Other Duties As Assigned Required Qualifications: • 6+ years of work experience as a service technician as a security integrator with manufacturer certifications, • Industry experience working with access control, intrusion and CCTV, • Valid US drivers license with acceptable record, • Ability to pass pre-employment screening, • Ability to troubleshoot electronic systems and find solutions, • Ability to use sound judgment and perform under pressure, • Ability to operate as part of a team, • Good troubleshooting skills, exceptional customer service, • Great written and verbal communication, • Positive attitude Preferred Qualifications: • Video Surveillance: Avigilon, Hanwha, Genetec, Milestone, Exacq, Honeywell, Bosch, Axis, • Access Control: LenelS2, AMAG, Avigilon, Genetec, Honeywell, Open Path, Lenel, RS2, Software House, Hirsch, • Intrusion: DMP, Honeywell, Bosch, • Intercom: Aiphone, Viking, • Engineering or estimating skills, • Knowledge of how to program systems Physical Demands: In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of the job. In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job. • Working Hours: This position generally works Monday- Friday, overtime and on call when necessary, • Travel Requirements: Local travel up to 100 miles radius, • Benefits:, • Medical, • Dental, • Vision, • Flexible Spending Accounts, • 401K w/ company match, • Life/AD&D/LTD, • Paid Vacation/Sick/Holidays, • Employee Assistance Program This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email . Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job Description Bemana is recruiting on behalf of a well-established company in the Power Generation industry that is currently expanding their team in the Houston, TX area. We are seeking an experienced Generator Technician with hands-on experience working with diesel and natural gas generator systems, strong diagnostic abilities, and the ability to work independently in the field. This role involves installation, maintenance, troubleshooting, and repair of generator systems and associated equipment. Position Offers: • Up to $50/hr. If your target pay is higher, we still encourage you to apply—we could request adjustments based on experience and market conditions, • Top Benefits: health and dental insurance, 401k (with a company match), PTO, and much more!, • Company-sponsored training and certifications, • Perform preventive and corrective maintenance on diesel and natural gas generators up to 2MW., • Diagnose and repair control panel issues and electrical faults., • Conduct ATS replacement, repair, and troubleshooting., • Perform load bank testing and system performance checks., • Utilize OEM diagnostic software and tools for troubleshooting., • Read and interpret wiring diagrams, schematics, and technical manuals., • Document all work performed and maintain accurate service records., • Minimum 4+ years of generator technician experience., • Experience with diesel and natural gas generator systems., • Skilled in control panel diagnostics and ATS troubleshooting., • Familiarity with Rehlko or similar OEM brands., • Proficient using multimeters, clamp meters, mechanical tools, and fuel-system diagnostic tools. If your experience matches the description above, submit your resume, and one of our recruiters will be in touch to tell you more about the position and learn more about your experience and aspirations. If your experience does not match this job description, we still encourage you to reach out to one of our recruiters, so we can learn about your professional aspirations for future job openings. About Bemana Bemana provides recruiting services to the nation's equipment and industrial sectors. Our clients and candidates value us for our specialized recruiting expertise, vast knowledge of the equipment and industrial job market, and ability to solve their most challenging employment needs. We have successfully recruited thousands of top-level professionals filling a wide range of management, sales, engineering, and technical positions across the nation. Referral Program Bemana offers a $500 reward for referrals that lead to a hire. So, if this job or location is not for you, but you know someone that might be interested, send them this link and we'll send you a check if they get hired. Terms & conditions apply.

Job Description Why DH Pace? The DH Pace Company is a family-owned and privately held business with annual sales over $1 billion through 60+ offices located across the continental United States. The Company is an industry leader in the distribution, installation, maintenance, and repair of a complete range of commercial, industrial, and residential door, docking and security products. In 2026, DH Pace is celebrating its 100th anniversary in business. DH Pace Company, Inc. is hiring Entry Door Technicians to service a variety of entry doors and door hardware in Austin, TX and surrounding areas. You must be able to troubleshoot, work without supervision, and have great attention to detail. Valid driver's license required with a good driving record. If you have any experience in construction, as a general laborer, service technician, installer, carpenter, mechanic, assembly worker, or any skilled trade, you may find this opportunity to be a great fit for your career! Job Responsibilities: • Service all products, to include doors and dock equipment cleanly and accurately, • Identify opportunities to provide customers with products and services, • Tracking and maintaining job related paperwork and submitting in a timely manner, • Always operating in safety conscious manner while performing job duties, • High school diploma or equivalent preferred, • Able to safely lift 100 pounds over your head, • Commercial door experience and welding experience is a plus but not required, • Must possess valid driver's license and good driving record, • Experience in construction, as a general laborer, service technician, installer, carpenter, mechanic, assembly worker, or any skilled trade is helpful Our benefit offerings include: • Medical, dental, and vision options: Available on the 1st day of the month following your start date!, • Paid time off plan: 13 days accrued annually during your 1st year; 16 days accrued during your 2nd year!, • Paid Holidays: New Years Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, Christmas Day, • Floating Holidays: Up to 2 floating holidays per year, • Competitive compensation: Including annual performance evaluations!, • 401k retirement plan: Including an employer match!, • Company paid: Life insurance, short-term disability, & long-term disability, • and more! Successful completion of references, employment verifications, background check, drug screen, and driving record (if applicable) required in advance of hire. DH Pace Company, Inc. does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of DH Pace Company, Inc. without a prior written search agreement will be considered unsolicited and the property of DH Pace Company, Inc. Please, no phone calls or emails. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)