Trabajos lock en San Diego, CaliforniaCrear alertas

Job Description Labor One is hiring Journey-Level Pipe Welders for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: -This position is responsible for welding pipe of various metals on a ship or in a shop to support mechanical repairs and modernization of marine vessels including US Naval, Military Sealift Command, and commercial ships. The journeyman welder is also responsible for providing direction to assigned helpers. -The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE: 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found by writing condition reports that include recommended corrective action., 5. Must have a thorough knowledge of SMAW, FCAW, and GMAW theory., 6. Must be able to certify in P-3 joint with permanent backing ring, and P-14 socket weld joint:, 7. SMAW, 8. GTAW, 9. FCAW OR, 10. Silver Brazing, 11. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 12. Must possess a working knowledge of equipment and work processes used in marine pipe welding., 13. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 14. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 15. Must have four (4) years of pipe welding experience. DUTIES AND RESPONSIBILITIES: 1. Provide direction to a pipe welding helper, if assigned, as needed to complete the assigned tasks., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor., 3. Work shifts and overtime as assigned., 4. Be accountable for completion of daily work assignments., 5. Comply with OSHA standards and the shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Confer with the supervisor to resolve unexpected events related to your assigned task. Carry out written or oral instructions. Work Tasks Include: a. Inspect and prepare the area for hot work, including gas free certifications and tag-outs, before commencing any hot work. b. Prepares work area for production welding by inspecting joints and cleaning as required. c. Inspect welds for defects. Confer with supervision before correcting deficiencies. d. Document existing conditions using Condition Found Reports. e. Ensure gas free certifications are accurate and up to date. f. Assist with Lock-out Tag-out for work being performed. WORK ENVIRONMENT: -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. -The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift only 40 hours a week / OT with approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Senior Litigation Counsel/Partner level position in the San Diego area. Sanford Heisler Sharp McKnight is an award-winning national law firm with offices in La Jolla, New York, Washington, D.C., Nashville, and Palo Alto. We have created a dynamic firm culture that is based on integrity, collaboration, and mutual respect. The firm is seeking an experienced litigator to join its burgeoning, 13 person ERISA and Financial Services Litigation practice to litigate high level, multi-million class cases against some of the largest companies in America. You will be expected to: • Have strong communication skills, • Conduct legal research and support development of case strategy, • Draft pleadings, discovery, motions, mediation statements, and trial briefs, • Supervise associate-level lawyers in doing the same, • Participate in mediations, • Appear in court for hearings, motions, and trials, • Manage deadlines, filings, and input billing ethically and efficiently, • Collaborate with lawyers across our offices and work to achieve success, • Maintain a social media presence Compensation and Benefits: • Salary: We offer a competitive lock-step salary ranging from $135,000 - $180,000 annually based on years out of law school, plus discretionary bonuses, • Health, dental, and vision insurance (affordable plans with firm contribution), • Vacation, sick leave & paid holidays, • 401(k) with employer contribution, • Bar dues, MCLE, and professional development budget, • Paid parking This role is primarily in-office (La Jolla) with some hybrid flexibility. A minimum 3 years of litigation experience in the federal courts is required. Having experience in managing ERISA class action cases and a litigation team is preferred. Having experience with financial products and services are valued. If you are interested in this opportunity, then send us your resume and cover letter along with a writing sample to: Subject line: San Diego Attorney – ERISA Litigation: [Your Name] Diversity & Accommodations Sanford Heisler Sharp McKnight is committed to equal employment opportunity and values a diverse workplace. We strongly encourage applications from individuals of all backgrounds and identities. If you need a reasonable accommodation during the hiring process, contact us at

We are a fast-growing mobile locksmith company providing residential, commercial, and automotive locksmith services across Southern California. If you’re an experienced and dependable technician who takes pride in quality work and customer service, we want to hear from you. Responsibilities • Respond to service calls for residential, commercial, and automotive customers., • Perform lock installations, rekeys, repairs, and hardware servicing., • Handle lockouts safely and efficiently for homes, businesses, and vehicles., • Cut and duplicate keys; program car keys and fobs (if equipped)., • Troubleshoot and repair common issues with locks, doors, and access systems., • Maintain professional communication with customers, dispatch team, and management., • Accurately document job details, materials used, and customer payments through our system., • Keep company vehicle and tools organized, clean, and well-maintained., • Represent the company professionally, providing friendly and reliable service. Requirements • Active locksmith license for California (where required)., • Strong mechanical aptitude and problem-solving skills., • Valid driver’s license and clean driving record required., • Comfortable using a smartphone/tablet for navigation and job tracking., • Ability to work independently and manage tasks efficiently., • Professional, reliable, and customer-focused attitude. Why Join Our Team • Stable, full-time position with a supportive operations team., • All customer calls and scheduling handled by our dispatch center — no self-sourcing work., • Fast-growing company with room to expand your skills and responsibilities., • Work directly with a team that values communication, reliability, and craftsmanship.

Job Description Position Summary El Capitan Mobile Home Park, a well-established 76-space all-age manufactured home community in El Cajon, is seeking a professional, organized Community Manager to oversee daily operations, ensure rule compliance, supervise onsite staff, and maintain a high standard of property management. This position requires someone who communicates clearly, maintains appropriate boundaries with residents, and applies policies consistently. The ideal candidate is steady, practical, and able to navigate challenging resident interactions with confidence while maintaining a respectful, professional tone. Company housing is provided and occupancy is required. Why This Role Matters • You will provide consistent onsite leadership and operational stability., • You will oversee and support onsite staff while maintaining performance expectations., • You will help ensure the community remains clean, organized, and compliant. Founded in 1958, The Star Companies is a family-owned and operated firm specializing in the manufactured housing industry. With communities throughout California, Colorado, Idaho, and Nevada, we provide value in housing and integrity in service. Star's Mission: We provide superior service to manufactured home communities, maximizing value of the properties that we are entrusted to serve. Our Core Values: • Hands-on Ownership, • Commit to Your Best Work, • Always Learning, • Do the Right Thing Resident Relations & Communication • Serve as the primary point of contact for residents with a professional, courteous, and consistent approach., • Communicate rules, policies, and decisions clearly and in alignment with company standards., • Address resident questions and concerns objectively, maintaining appropriate boundaries., • Conduct regular property inspections for safety, maintenance, and rule adherence., • Apply Mobilehome Residency Law (MRL), Title 25, landlord/tenant laws, and community rules accurately., • Prepare, post, and distribute notices and maintain required records., • Support a community environment where expectations are clear and policies are followed., • Conduct move-in/move-out inspections for park-owned homes., • Prepare and maintain reports of planned move-in/move-outs and vacancies., • Collect and schedule repairs for park-owned home tenant maintenance request forms., • Create punch lists for park-owned home rehabs. followed., • Manage rent collection, posting, and bank deposits., • Maintain organized and accurate digital and physical records., • Read and record utility meter data., • Supervise onsite employees, including maintenance technician, and lock-up porter., • Assign tasks, set priorities, and support staff performance and accountability., • Provide direction and ensure smooth day-to-day operations., • Coordinate and oversee vendors, contractors, and service providers., • Manage work orders from issuance through completion., • Oversee maintenance routines and capital improvement activities., • Perform minor maintenance tasks when needed., • Manage clubhouse and amenity scheduling., • Policies and rules are followed consistently, with clear communication., • Staff and vendors understand expectations and perform reliably., • Documentation is complete, organized, and compliant with company standards., • The community remains clean, orderly, and well-maintained., • Resident interactions are handled calmly, professionally, and with confidence. Required: • Ability and willingness to live in company-provided housing., • 3–5 years of residential property management experience., • Strong communication skills with the ability to remain clear, consistent, and professional., • Ability to maintain boundaries and apply policies reliably., • Experience supervising staff or leading teams., • Knowledge of property management software (Rent Manager, Yardi, AppFolio, etc.)., • Strong organization, time-management, and documentation skills., • Ability to remain composed when navigating difficult or sensitive situations., • AA degree or equivalent education., • Experience in manufactured housing or other property management., • Ability to walk the community for inspections., • Ability to sit at a computer for extended periods., • Hourly: $21 to $22 per hour, DOE, • Housing: Company housing included, occupancy is required., • Medical, dental, and vision benefits., • 401(k) with company match., • 10 paid holidays. El Cajon, CA 92019 How to Apply If you are an experienced property management professional with strong organizational skills and the ability to maintain a well-run community through clear communication and consistent expectations, we encourage you to apply online. We are an equal opportunity employer. Must be able to pass 7-year background check. Any job offer will be based on the results of background screening.

Job Description Overview When you work at Chugach Government Solutions (CGS), you join a proud legacy of supporting missions while sustaining culture. The federal division of Chugach Alaska Corporation, CGS has been supporting critical missions as a government contractor for over 25 years. Our focus is to support facility maintenance, IT/technical services, construction and education. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields – each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders. At CGS, empowering employees is a part of our core, and that focus is one of the ways we build and foster high-performing teams. We empower our employees through competitive compensation and benefits package, professional growth opportunities, truthful communication, and more! If you are looking for an opportunity to serve something bigger than yourself; if you want your day job to be one that creates meaningful value; if you are looking for an environment that highly values employees and respects individual differences – then Chugach Government Solutions may be the right fit for you! Responsibilities Provides on-call after hours general maintenance response to service calls at the MCAS Miramar Bachelor Enlisted Quarters (BEQs). May perform additional general maintenance duties assigned by the supervisor. Typical month includes 2 weekday shifts that begin at 4:00pm, and end at 7:30am the next day. One or two weekend shifts per month, depending on the rotation, which begin Friday at 4:00pm, and end on Monday at 7:00am. Pay Rate - $24.83/hr Work Model: On-site Qualifications Essential Duties & Job Functions: • On-call phone must be picked up from the BEQ office at the start of the shift at 4:00pm., • Respond to general maintenance service calls within 1 hour on BEQ contract, which includes plumbing, (sink clogs, toilets, etc.) HVAC, lock battery replacements, lighting, pest, and other general bachelor quarter housing issues., • If a call is received, the GMW receives one hour for equipment pick up, and one hour for equipment drop off., • Weekday shift begins at 4:00pm, and ends at 7:30am the next day. Weekend shift start at 4:00pm on Fridays, and end at 7:30am the following Monday., • Follow established safety procedures and utilizes safety protective equipment and clothing that pertain to particular trades and skills., • Ensure proper housekeeping practices are observed., • Timely, cost effective performance of duties., • Timely completion and accuracy of all work., • Adherence to contract requirements and DBSI policies., • Working closely and harmoniously with fellow workers., • Adherence to all safety and health rules and regulations.

White Sands, a HumanGood life plan community (CCRC) in beautiful La Jolla, CA, is seeking a full-time Maintenance Technician III for our Buildings and Grounds team. As the largest nonprofit owner/operator of senior living communities in California and one of the largest in the country, we are more than just a place to work. We are here to ensure that our residents are provided with every opportunity to become their best selves as they define it, and this begins with YOU. Schedule: Monday-Friday 11:00 a.m. - 7:00 p.m. REQUIREMENTS: • Experience/Training – 3 - 5+ years of experience in building maintenance, or any equivalent combination of training and experience which provides the required skills, knowledge and abilities., • Certificates, Licenses, Registrations - Certification, license or equivalent as required under state and/or local regulation to operate or repair certain equipment in a technical field such as HVAC, building trades or building utilities program, • Perform assigned maintenance duties and routine preventive maintenance. Identify deficiencies and follow procedure for correcting problems;, • Performs skilled work in the specialized and preventive care, repair, and maintenance of heating and air conditioning systems and building systems and equipment., • Performs heating and air conditioning, plumbing, electrical and remodeling work., • Responds to work orders in a timely manner and performs follow up calls as needed, • Completing work within scheduled time frame, according to budget and priority set by supervisor., • Repairs and maintains equipment in resident units and in community;, • General plumbing tasks such as changing out faucets, mixing valves, plunging a toilet, replacing a wax ring, rebuilding a toilet, clearing drains;, • General electrical tasks such as lock out/tag out, bulb replacement, ballast replacement, fixture change out, fuse replacement, light switch/outlet replacement.;, • Change bulbs, HVAC filters, and batteries;, • Hang pictures, blinds, hardware;, • Assemble furniture and move furniture;, • 2-4+ years of experience in a related field of building maintenance or construction, or any equivalent combination of training and experience which provides the required skills, knowledge and abilities., • Certification, license or equivalent as required under state and/or local regulation to operate or repair certain equipment in a technical field such as HVAC, building trades or building utilities program preferred, • High school diploma or equivalent, • Current & valid Drivers’ License and driving record free of major infractions Our values define how and why we serve our mission, but our team members make up our HumanGood culture. You would display behavior that supports our mission, vision, behaviors and values that include: • Passion, • Inclusion, • Courage, • Innovation As the largest nonprofit owner/operator of senior living communities in California and one of the largest in the country, we are more than just a place to work. We are here to ensure that all we serve are provided with every opportunity to become their best selves as they define it, and this begins with YOU. At HumanGood, we offer the opportunity to be part of something bigger than yourself on top of an incredible package of benefits and perks for our part-time and full-time Team Members that can add up to 40% of your base pay. Full-Time Team Members: • 20 days of paid time off, plus 7 company holidays (increases with years of service), • 401(k) with up to 4% employer match and no waiting on funds to vest, • Health, Dental and Vision Plans- start the 1st of the month following your start date, • $25 per line Cell Phone Plan, • Tuition Reimbursement, • 5 star employer-paid employee assistance program As an equal opportunity housing provider and employer, HumanGood provides housing and employment opportunities regardless of race, color, national origin, religion, sex, physical or mental disability, familial status or any other classification protected by law. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

Job Description Labor One is hiring Insulator Helpers for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for performing the installation and removal of insulation of any component onboard ships. A Helper works under the guidance of an Improver, Journeyman, and Supervisor to measure, cuts and fabricates materials for insulation application to bulkheads, overheads, piping, ducts, machinery, and equipment to minimize heat transfer, prevent moisture condensation, and to deaden sound. Work is accomplished in all phases of ship repair and modernization of maritime vessels including US Naval Vessels, Military Sealift Command, and commercial ships and barges. The position requires a basic knowledge of procedures and the insulation craft, and the drive to accomplish quality work and learn. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Musty have a basic understanding of ship repair terminology and ship compartment location nomenclature., 3. Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to write a report for the supervisor or journeyman describing the material condition of the ship as it pertains to the assigned work item., 5. Must be able to effectively confer job related information to the improver, journeyman, and supervisor., 6. Must have experience using hand and power tools associated with the trade in a safe manner., 7. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system., 8. Two (2) years of related experience, some of which must be in the maritime environment. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and the shipyards best safety practices., 2. Must arrive at the designated work site at the assigned time and end the shift as directed by the supervisor., 3. Work shifts and overtime as assigned., 4. Must keep the work area clean and safe at all times, especially at the end of the shift., 5. Must follow the direction provided by the supervisor, improver, and journeyman., 6. Complete daily work assignments and provide status of unfinished work., 7. Use appropriate sections of NAVSEA, ABS, Coast Guard standards and manufacturer's tech manuals required to accomplish the insulation task., 8. Assist with providing Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Carry out instructions furnished in written, oral, or diagram form. Work with the supervisor, journeyman, and Improver to resolve, in a professional manner, unexpected events related to your assigned task. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel. 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 4. Work at a variety of levels and positions (ex. Waist, eye, above head)., 5. Good balance while working on uneven surfaces and maneuvering obstacles., 6. Sufficient handgrip and coordination to carry and operate tools and equipment., 7. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 8. Respond to visual, verbal, and audible sounds/commands., 9. Work at heights above 12' from ladders, scaffolding, and manlifts., 10. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 11. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 12. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd shift 40 hours a week; overtime with supervisors approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Journey-Level Insulators for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for performing, with minimal supervision, the installation and removal of insulation of any component onboard ships. A journeyman measures, cuts and fabricates materials for insulation application to bulkheads, overheads, piping, ducts, machinery, and equipment to minimize heat transfer, prevent moisture condensation, and to deaden sound. Wok is accomplished in all phases of ship repair and modernization of maritime vessels including US Naval Vessels, Military Sealift Command, and commercial ships and barges. The position requires a working knowledge of procedures, comprehensive knowledge of the insulation craft and the drive to accomplish quality work on schedule. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Musty have a comprehensive understanding of ship repair terminology and ship compartment location nomenclature., 3. Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to write Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 5. Must be able to effectively confer job related information to the supervisor, improvers, and helper., 6. Must have experience applying hullboard, Armaflex, Cal-sil, ventilation insulation, and insulation pads., 7. Must have experience fabricating insulation pads., 8. Must have experience using hand and power tools associated with the trade in a safe manner., 9. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system., 10. Must possess a basic understanding of the metric system., 11. Six (6) years of related experience, three (3) of which must be in the maritime environment. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and the shipyards best safety practices., 2. Must arrive at the designated work site at the assigned time and end the shift as directed by the supervisor., 3. Work shifts and overtime as assigned., 4. Must keeping the work area clean and safe at all times, especially at the end of the shift., 5. Understand relevant work processes, operation of equipment, and complete tasks proficiently., 6. Complete daily work assignments and provide status of unfinished work for shift turnover., 7. Use appropriate sections of NAVSEA, ABS, Coast Guard standards and manufacturer's tech manuals required to accomplish the insulation task., 8. Provide guidance to Improvers and Helpers., 9. Provide Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 10. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 11. Carry out instructions furnished in written, oral, or diagram form. Resolve unexpected events related to your assigned task in a professional manner. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. -----The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift 40 Hrs per Week OT per hiring Managers approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

We Build Better Communities Be Part of the Hawthorne Difference! Hawthorne Cat is a family-owned company that has led its markets for over 60 years in the sale, rental, and servicing of construction machinery and power generation equipment for industries on which our communities depend like agriculture, construction, marine, and government. Every member of our team plays a significant role in our success. Hawthorne Cat hires individuals who share our vision of Building Better Communities with our Customers and our values of Passion, Respect, Integrity, Dedication and Excellence (PRIDE). If you are looking to build your future with an established, thriving company with countless opportunities for growth and advancement, you've come to the right place! At Hawthorne Cat, we're always looking for exceptionally skilled, hardworking individuals interested in contributing to our success and the success of the communities that we serve. Our people are our most valuable asset. That's why at Hawthorne Cat we are committed to a comprehensive employee benefit program that helps our employees stay healthy, feel secure, and maintain a work/life balance. POSITION SUMMARY: With very little or no supervision, the Machine Service Technician 3 - Field will perform duties as assigned by management in the repair, maintenance and/or rebuilding of equipment in the service shop or field, in a safe, efficient and capable manner in the least amount of labor hours necessary, and without re-work. The Machine Service Technician 3 - Field requires work to be completed within 110% of any Flat Rate times that are established as targets. ESSENTIAL FUNCTIONS: \n • Analyze and diagnose equipment malfunctions.\n, • Perform all requirements outlined in Grade Levels III and IV.\n, • Remove and install parts, disassemble, and assemble components, and test and adjust assemblies with minimal supervision.\n, • Perform Caterpillar updates as directed by Caterpillar, Inc.\n, • Analyze all Caterpillar and allied product equipment systems and components for proper operation based on theory of design.\n, • Perform new and used equipment start-up for delivery to end-user.\n, • Effectively communicate with peers, leads and other staff members.\n, • Organize a job in a logical and economical sequence.\n, • Utilize Cat Interact and Servicelink (computer programs) and other online tools as required.\n, • Order parts through DBS (Dealer Business System).\n, • Enter labor time daily (DBS).\n, • Perform assigned work within the communicated time quoted/flat rated.\n, • Conduct customer training in proper use of Caterpillar and other equipment as needed.\n, • Complete assigned jobs to meet flat rate times with minimal to no rework.\n, • Write service reports that accurately document diagnosis and repairs performed on a daily basis.\n, • Attend toolbox meetings as required.\n, • Adhere to all company policies.\n, • Follow contamination control and OSHA/MSHA rules and regulations.\n, • Guide/mentor/train technicians with less expertise in the repairs of Caterpillar machines and systems.\n, • High school diploma or equivalent provide verification of all formal classroom study or hands on experience related to heavy equipment repairs. \n, • Prefer to have one of the following.\n, • Minimum (8) years of experience in the repair of Caterpillar or other heavy equipment products.\n, • Successful completion of Level Two Technician program\n, • Knowledge of basic hand tools, air tools, precision measuring tools and instruments, laptops, diagnostic software and cranes/rigging equipment.\n\n\n, • Expert working knowledge of hydraulics and powertrains.\n, • Proficient in the repairs of electrical and electronic systems.\n, • Ability to provide accurate information to lead/supervisor for quoting.\n, • Adapts to changes in the work environment;\n, • Manages competing demands; \n, • Changes approach or method to best fit the situation;\n, • Deals with frequent change, delays, or unexpected events in a professional manner.\n\n\n, • Must be able to obtain a passing score for the crane qualification test performed by a qualified Hawthorne trainer for this position.\n, • Ability to work unsupervised efficiently and be part of a team environment.\n, • Must be able to pass the Lock Out / Tag Out & Forklift certification class provided by a qualified Hawthorne trainer for this position.\n, • Perform the position with pride in professionalism while following Hawthorne's code of conduct.\n, • Possess basic computer knowledge and ability to use service software required in position.\n, • Must have valid California Driver's License with a clean record.\n, • Shop Requirements: Valid California Class "C" driver's license.\n, • Field Requirements: Valid California Class "B" driver's license, if assigned vehicle is required.\n\n\n, • Furnish all hand tools required to repair, test and diagnose hydraulic, air, power train, electrical and electronic systems on Caterpillar equipment., • NOTE: Some high dollar value tooling is supplied by Hawthorne.\n\n, • Walking and moving about on foot often through uneven terrain.\n, • Hand/arms operating equipment, hand and power tools.\n, • Lifting: Up to 50 lbs. daily, frequent exertion.\n, • Raises or lowers miscellaneous equipment parts and tools.\n, • Handling: Works with hands.\n, • Reaching: Extends hands and arms in any direction.\n, • Standing: Remains in standing position if required for certain repair or maintenance work. \n, • Climbing: In and out of equipment.\n, • Vision: Reads work tickets, parts and service books and operates heavy equipment.\n, • Talking: Communicates via telecommunications and in person.\n, • Sitting: Sits in equipment and in vehicles.\n, • Stooping: Bends body downward and forward by bending at knees or waist.\n, • Hearing: Hears well enough to discern mechanical problems for safety in and around shop and construction sites and to receive communication via telecommunications and in person. \n, • Noise: Works in conditions with constant or intermittent noise.\n, • Temperatures/Weather: Works in the field, outside with variations of temperature and weather.\n, • Competitive Compensation\n, • A great work environment and culture\n, • Career growth and advancement opportunities\n, • Training\n, • Medical, Dental and Vision plans\n, • Medical Video Appointments available\n, • Health Savings Account available\n, • Paid Time Off (PTO) Pay\n, • 401(k) Plan + Company Matching\n, • Health and Dependent Care Flexible Spending Accounts\n, • Life & Accident Insurance\n, • Employee Assistance Programs\n, • Legal Plan\n, • Travel Assistance Plan\n, • Wellness Programs\n, • Referral Bonus Program\n, • Longevity Bonus Program\n, • Recognition Programs and much more\n, • Hawthorne CAT discounts\n, • Boot Reimbursement\n, • Tuition Reimbursement\n, • Company-Supplied Uniforms\n, • Advanced Technical Training\n, • Estimated Compensation $45.00-$60.00 per hour\n\n Interested in joining the Hawthorne team? Check out our current available positions at: ACCOMMODATIONS: Reasonable accommodations for essential functions of the position will be considered. Hawthorne Cat® is an Equal Employment Opportunity/Affirmative Action Employer. M/F/V/D Hawthorne Cat® Participates in E-Verify.

We Build Better Communities Be Part of the Hawthorne Difference! Hawthorne Cat is a family-owned company that has led its markets for over 60 years in the sale, rental, and servicing of construction machinery and power generation equipment for industries on which our communities depend like agriculture, construction, marine, and government. Every member of our team plays a significant role in our success. Hawthorne Cat hires individuals who share our vision of Building Better Communities with our Customers and our values of Passion, Respect, Integrity, Dedication and Excellence (PRIDE). If you are looking to build your future with an established, thriving company with countless opportunities for growth and advancement, you've come to the right place! At Hawthorne Cat, we're always looking for exceptionally skilled, hardworking individuals interested in contributing to our success and the success of the communities that we serve. Our people are our most valuable asset. That's why at Hawthorne Cat we are committed to a comprehensive employee benefit program that helps our employees stay healthy, feel secure, and maintain a work/life balance. POSITION SUMMARY: As a technician, with minimal supervision, the Machine Service Technician 2 - Field is responsible for providing high quality repairs on Caterpillar and allied equipment. The Machine Service Technician 2 - Field will diagnose and troubleshoot engines, powertrains, electrical, and hydraulic systems; experience with cat diagnostic equipment, Cat repair tooling, rigging, and blocking equipment is essential. Due to multiple projects the Machine Service Technician 2 - Field will be assigned, this position requires planning and organization skills with a particular emphasis on controlling job costs. The Machine Service Technician 2 - Field will investigate, analyze, and identify issues in order to make recommendations for the appropriate repairs. Our technicians work with a variety of people, communication skills that include strong interpersonal skills, effective writing, basic computer skills, and ability to respond to the lead technicians/management in a positive, caring, and timely manner is required. ESSENTIAL FUNCTIONS: \n • Analyze and diagnose equipment malfunctions.\n, • Remove and install parts, disassemble, and assemble components, and test and adjust assemblies with minimal supervision.\n, • Perform Caterpillar updates as directed by Caterpillar, Inc.\n, • Analyze all Caterpillar and allied product equipment systems and components for proper operation based on theory of design.\n, • Effectively communicate with peers, leads and other staff members.\n, • Organize a job in a logical and economical sequence.\n, • Utilize Cat Interact and Servicelink (computer programs) and other online tools as required.\n, • Order parts through DBS (Dealer Business System).\n, • Enter your labor time daily (DBS).\n, • Perform assigned work within the communicated time quoted/flat rated.\n, • Conduct customer training in proper use of Caterpillar equipment as needed.\n, • Complete assigned jobs to meet flat rate times with minimal to no rework.\n, • Write service reports that accurately document diagnosis and repairs performed on a daily basis.\n, • Attend toolbox meetings as required.\n, • Adhere to all company policies.\n, • Follow contamination control and OSHA/MSHA rules and regulations.\n, • Guide/mentor/train technicians with less expertise in the repairs of Caterpillar machines and systems.\n, • High school diploma or equivalent\n, • Prefer to have one of the following.\n, • Five to eight (5-8) years of experience in the repair of Caterpillar or other heavy equipment products.\n, • Successful completion of Level One Technician program\n\n\n, • General knowledge of basic hand tools, air tools, precision measuring tools and instruments, laptops, diagnostic software and cranes/rigging equipment.\n, • Ability to provide accurate information to lead/supervisor for quoting.\n, • Ability to adapt to changes in the work environment;\n, • Manages competing demands;\n, • Changes approach or method to best fit the situation;\n, • Deals with frequent change, delays, or unexpected events.\n\n\n, • Must be able to obtain a passing score for the crane qualification test performed by a qualified Hawthorne trainer for this position.\n, • Ability to work unsupervised efficiently and be part of a team environment.\n, • Must be able to pass the Lock Out / Tag Out & Forklift certification class provided by a qualified Hawthorne trainer for this position.\n, • Perform the position with pride in professionalism while following Hawthorne's code of conduct.\n, • Possess basic computer knowledge and ability to use service software required in position.\n, • Must have valid California Driver's License with a clean record.\n, • Shop Requirements: Valid California Class "C" driver's license.\n, • Field Requirements: Valid California Class "B" driver's license, if assigned vehicle is required.\n, • Furnish all hand tools required to repair, test and diagnose hydraulic, air, power train, electrical and electronic systems on Caterpillar equipment., • NOTE: Some high dollar value tooling is supplied by Hawthorne.\n\n, • Walking and moving about on foot often through uneven terrain.\n, • Hands/arms operating equipment, hand and power tools.\n, • Lifting: Up to 50 lbs. daily, frequent exertion. Raises or lowers miscellaneous equipment parts and tools.\n, • Handling: Works with hands.\n, • Reaching: Extends hands and arms in any direction.\n, • Standing: Remains in standing position if required for certain repair or maintenance work.\n, • Climbing: In and out of equipment.\n, • Vision: Reads work tickets, parts and service books and operates heavy equipment.\n, • Talking: Communicates via telecommunications, in writing, and in person.\n, • Sitting: Sits in equipment and in vehicles.\n, • Stooping: Bends body downward and forward by bending at knees or waist.\n, • Hearing: Hears well enough to discern mechanical problems for safety in and around shop and construction sites and to receive communication via telecommunications and in person. \n, • Noise: Works in conditions with constant or intermittent noise.\n, • Temperatures/Weather: Works in the field, outside with variations of temperature and weather.\n, • Competitive Compensation\n, • A great work environment and culture\n, • Career growth and advancement opportunities\n, • Training\n, • Medical, Dental and Vision plans\n, • Medical Video Appointments available\n, • Health Savings Account available\n, • Paid Time Off (PTO) Pay\n, • 401(k) Plan + Company Matching\n, • Health and Dependent Care Flexible Spending Accounts\n, • Life & Accident Insurance\n, • Employee Assistance Programs\n, • Legal Plan\n, • Travel Assistance Plan\n, • Wellness Programs\n, • Referral Bonus Program\n, • Longevity Bonus Program\n, • Recognition Programs and much more\n, • Hawthorne CAT discounts\n, • Boot Reimbursement\n, • Tuition Reimbursement\n, • Company-Supplied Uniforms\n, • Advanced Technical Training\n, • Estimated Compensation $38.00-$50.00 per hour\n\n Interested in joining the Hawthorne team? Check out our current available positions at: ACCOMMODATIONS: Reasonable accommodations for essential functions of the position will be considered. Hawthorne Cat® is an Equal Employment Opportunity/Affirmative Action Employer. M/F/V/D Hawthorne Cat® Participates in E-Verify.

We Build Better Communities Be Part of the Hawthorne Difference! Hawthorne Cat is a family-owned company that has led its markets for over 60 years in the sale, rental, and servicing of construction machinery and power generation equipment for industries on which our communities depend like agriculture, construction, marine, and government. Every member of our team plays a significant role in our success. Hawthorne Cat hires individuals who share our vision of Building Better Communities with our Customers and our values of Passion, Respect, Integrity, Dedication and Excellence (PRIDE). If you are looking to build your future with an established, thriving company with countless opportunities for growth and advancement, you've come to the right place! At Hawthorne Cat, we're always looking for exceptionally skilled, hardworking individuals interested in contributing to our success and the success of the communities that we serve. Our people are our most valuable asset. That's why at Hawthorne Cat we are committed to a comprehensive employee benefit program that helps our employees stay healthy, feel secure, and maintain a work/life balance. POSITION SUMMARY: As a technician, with minimal supervision, the Machine Service Technician 2 - Field is responsible for providing high quality repairs on Caterpillar and allied equipment. The Machine Service Technician 2 - Field will diagnose and troubleshoot engines, powertrains, electrical, and hydraulic systems; experience with cat diagnostic equipment, Cat repair tooling, rigging, and blocking equipment is essential. Due to multiple projects the Machine Service Technician 2 - Field will be assigned, this position requires planning and organization skills with a particular emphasis on controlling job costs. The Machine Service Technician 2 - Field will investigate, analyze, and identify issues in order to make recommendations for the appropriate repairs. Our technicians work with a variety of people, communication skills that include strong interpersonal skills, effective writing, basic computer skills, and ability to respond to the lead technicians/management in a positive, caring, and timely manner is required. ESSENTIAL FUNCTIONS: \n • Analyze and diagnose equipment malfunctions.\n, • Remove and install parts, disassemble, and assemble components, and test and adjust assemblies with minimal supervision.\n, • Perform Caterpillar updates as directed by Caterpillar, Inc.\n, • Analyze all Caterpillar and allied product equipment systems and components for proper operation based on theory of design.\n, • Effectively communicate with peers, leads and other staff members.\n, • Organize a job in a logical and economical sequence.\n, • Utilize Cat Interact and Servicelink (computer programs) and other online tools as required.\n, • Order parts through DBS (Dealer Business System).\n, • Enter your labor time daily (DBS).\n, • Perform assigned work within the communicated time quoted/flat rated.\n, • Conduct customer training in proper use of Caterpillar equipment as needed.\n, • Complete assigned jobs to meet flat rate times with minimal to no rework.\n, • Write service reports that accurately document diagnosis and repairs performed on a daily basis.\n, • Attend toolbox meetings as required.\n, • Adhere to all company policies.\n, • Follow contamination control and OSHA/MSHA rules and regulations.\n, • Guide/mentor/train technicians with less expertise in the repairs of Caterpillar machines and systems.\n, • High school diploma or equivalent\n, • Prefer to have one of the following.\n, • Five to eight (5-8) years of experience in the repair of Caterpillar or other heavy equipment products.\n, • Successful completion of Level One Technician program\n\n\n, • General knowledge of basic hand tools, air tools, precision measuring tools and instruments, laptops, diagnostic software and cranes/rigging equipment.\n, • Ability to provide accurate information to lead/supervisor for quoting.\n, • Ability to adapt to changes in the work environment;\n, • Manages competing demands;\n, • Changes approach or method to best fit the situation;\n, • Deals with frequent change, delays, or unexpected events.\n\n\n, • Must be able to obtain a passing score for the crane qualification test performed by a qualified Hawthorne trainer for this position.\n, • Ability to work unsupervised efficiently and be part of a team environment.\n, • Must be able to pass the Lock Out / Tag Out & Forklift certification class provided by a qualified Hawthorne trainer for this position.\n, • Perform the position with pride in professionalism while following Hawthorne's code of conduct.\n, • Possess basic computer knowledge and ability to use service software required in position.\n, • Must have valid California Driver's License with a clean record.\n, • Shop Requirements: Valid California Class "C" driver's license.\n, • Field Requirements: Valid California Class "B" driver's license, if assigned vehicle is required.\n, • Furnish all hand tools required to repair, test and diagnose hydraulic, air, power train, electrical and electronic systems on Caterpillar equipment., • NOTE: Some high dollar value tooling is supplied by Hawthorne.\n\n, • Walking and moving about on foot often through uneven terrain.\n, • Hands/arms operating equipment, hand and power tools.\n, • Lifting: Up to 50 lbs. daily, frequent exertion. Raises or lowers miscellaneous equipment parts and tools.\n, • Handling: Works with hands.\n, • Reaching: Extends hands and arms in any direction.\n, • Standing: Remains in standing position if required for certain repair or maintenance work.\n, • Climbing: In and out of equipment.\n, • Vision: Reads work tickets, parts and service books and operates heavy equipment.\n, • Talking: Communicates via telecommunications, in writing, and in person.\n, • Sitting: Sits in equipment and in vehicles.\n, • Stooping: Bends body downward and forward by bending at knees or waist.\n, • Hearing: Hears well enough to discern mechanical problems for safety in and around shop and construction sites and to receive communication via telecommunications and in person. \n, • Noise: Works in conditions with constant or intermittent noise.\n, • Temperatures/Weather: Works in the field, outside with variations of temperature and weather.\n, • Competitive Compensation\n, • A great work environment and culture\n, • Career growth and advancement opportunities\n, • Training\n, • Medical, Dental and Vision plans\n, • Medical Video Appointments available\n, • Health Savings Account available\n, • Paid Time Off (PTO) Pay\n, • 401(k) Plan + Company Matching\n, • Health and Dependent Care Flexible Spending Accounts\n, • Life & Accident Insurance\n, • Employee Assistance Programs\n, • Legal Plan\n, • Travel Assistance Plan\n, • Wellness Programs\n, • Referral Bonus Program\n, • Longevity Bonus Program\n, • Recognition Programs and much more\n, • Hawthorne CAT discounts\n, • Boot Reimbursement\n, • Tuition Reimbursement\n, • Company-Supplied Uniforms\n, • Advanced Technical Training\n, • Estimated Compensation $38.00-$50.00 per hour\n\n Interested in joining the Hawthorne team? Check out our current available positions at: ACCOMMODATIONS: Reasonable accommodations for essential functions of the position will be considered. Hawthorne Cat® is an Equal Employment Opportunity/Affirmative Action Employer. M/F/V/D Hawthorne Cat® Participates in E-Verify.

We Build Better Communities Be Part of the Hawthorne Difference! Hawthorne Cat is a family-owned company that has led its markets for over 60 years in the sale, rental, and servicing of construction machinery and power generation equipment for industries on which our communities depend like agriculture, construction, marine, and government. Every member of our team plays a significant role in our success. Hawthorne Cat hires individuals who share our vision of Building Better Communities with our Customers and our values of Passion, Respect, Integrity, Dedication and Excellence (PRIDE). If you are looking to build your future with an established, thriving company with countless opportunities for growth and advancement, you've come to the right place! At Hawthorne Cat, we're always looking for exceptionally skilled, hardworking individuals interested in contributing to our success and the success of the communities that we serve. Our people are our most valuable asset. That's why at Hawthorne Cat we are committed to a comprehensive employee benefit program that helps our employees stay healthy, feel secure, and maintain a work/life balance. POSITION SUMMARY: With very little or no supervision, will perform duties as assigned by management in the repair, maintenance and/or rebuilding of equipment in the service shop or field, in a safe, efficient and capable manner in the least amount of labor hours necessary, and without re-work. This position requires work to be completed within 110% of any Flat Rate times that are established as targets. ESSENTIAL FUNCTIONS: \n • Analyze and diagnose equipment malfunctions.\n, • Remove and install parts, disassemble, and assemble components, and test and adjust assemblies with minimal supervision.\n, • Perform Caterpillar updates as directed by Caterpillar, Inc.\n, • Analyze all Caterpillar and allied product equipment systems and components for proper operation based on theory of design.\n\n, • Perform new and used equipment start-up for delivery to end-user.\n\n, • Effectively communicate with peers, leads and other staff members.\n, • Organize a job in a logical and economical sequence.\n, • Utilize Cat Interact and ServiceLink (computer programs) and other online tools as required.\n, • Enter labor time daily (ServiceLink).\n, • Perform assigned work within the communicated time quoted/flat rated.\n, • Conduct customer training in proper use of Caterpillar and other equipment as needed.\n, • Complete assigned jobs to meet flat rate times with minimal to no rework.\n, • Write service reports that accurately document diagnosis and repairs performed on a daily basis.\n, • Attend toolbox meetings as required.\n, • Adhere to all company policies.\n, • Follow contamination control and OSHA/MSHA rules and regulations.\n, • Guide/mentor/train technicians with less expertise in the repairs of Caterpillar machines and systems.\n, • Perform other duties as assigned.\n\n EDUCATION, EXPERIENCE, AND SKILLS REQUIRED: \n • High school diploma or equivalent provide verification of all formal classroom study or hands on experience related to heavy equipment repairs. \n, • Prefer to have one of the following.\n, • Minimum (10) years of experience in the repair of Caterpillar or other heavy equipment products.\n, • Successful completion of Level Two Technician program\n, • Knowledge of basic hand tools, air tools, precision measuring tools and instruments, laptops, diagnostic software and cranes/rigging equipment.\n\n\n, • Expert working knowledge of hydraulics and powertrains.\n, • Proficient in the repairs of electrical and electronic systems.\n, • Ability to provide accurate information to lead/supervisor for quoting.\n, • Adapts to changes in the work environment;\n, • Manages competing demands;\n, • Changes approach or method to best fit the situation;\n, • Deals with frequent change, delays, or unexpected events in a professional manner.\n\n\n, • Must be able to obtain a passing score for the crane qualification test performed by a qualified Hawthorne trainer for this position.\n, • Ability to work unsupervised efficiently and be part of a team environment.\n, • Must be able to pass the Lock Out / Tag Out & Forklift certification class provided by a qualified Hawthorne trainer for this position.\n, • Perform the position with pride in professionalism while following Hawthorne's code of conduct.\n, • Possess basic computer knowledge and ability to use service software required in position.\n Field Requirements: Valid California Class "B" driver's license, if assigned vehicle is required. • Contribute to building a positive team spirit; puts success of team above own interests; able to build morale and group commitments to goals and objectives; supports everyone's efforts to succeed.\n PHYSICAL DEMANDS: \n • Walking and moving about on foot often through uneven terrain.\n, • Hands/arms operating equipment, hand and power tools.\n, • Lifting: Up to 50 lbs. daily, frequent exertion.\n, • Raises or lowers miscellaneous equipment parts and tools.\n, • Handling: Works with hands.\n, • Reaching: Extends hands and arms in any direction.\n, • Standing: Remains in standing position if required for certain repair or maintenance work.\n, • Climbing: In and out of equipment.\n, • Vision: Reads work tickets, parts and service books and operates heavy equipment.\n, • Talking: Communicates via telecommunications and in person.\n, • Sitting: Sits in equipment and in vehicles.\n, • Stooping: Bends body downward and forward by bending at knees or waist.\n, • Hearing: Hears well enough to discern mechanical problems for safety in and around shop and construction sites and to receive communication via telecommunications and in person. \n, • Laying: Lies in prone position under vehicles and equipment. \n\n ENVIRONMENTAL: Noise: Works in conditions with constant or intermittent noise. Temperatures/Weather: Works in a warehouse and outside with variations of temperature and weather. Exposure: Foul odors, fumes and harsh substances. HERE'S WHAT WE OFFER... \n • Competitive Compensation\n, • A great work environment and culture\n, • Career growth and advancement opportunities\n, • Training\n, • Medical, Dental and Vision plans\n, • Medical Video Appointments available\n, • Health Savings Account available\n, • Paid Time Off (PTO) Pay\n, • 401(k) Plan + Company Matching\n, • Health and Dependent Care Flexible Spending Accounts\n, • Life & Accident Insurance\n, • Employee Assistance Programs\n, • Legal Plan\n, • Travel Assistance Plan\n, • Wellness Programs\n, • Referral Bonus Program\n, • Longevity Bonus Program\n, • Recognition Programs and much more\n, • Hawthorne CAT discounts\n, • Boot Reimbursement\n, • Tuition Reimbursement\n, • Company-Supplied Uniforms\n, • Advanced Technical Training\n, • Estimated Compensation $45 - $60 per hour\n\n Interested in joining the Hawthorne team? Check out our current available positions at: ACCOMMODATIONS: Reasonable accommodations for essential functions of the position will be considered. Hawthorne Cat® is an Equal Employment Opportunity/Affirmative Action Employer. M/F/V/D Hawthorne Cat® Participates in E-Verify.

Job Description Job Description: This position is responsible for the installation, repair, and hook-up of equipment for electrical services on a ship. The individual must have working knowledge of electrical theory and procedures and the ability to troubleshoot and repair shipboard electrical systems and equipment (600 V and less) in accordance with specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE Must possess the skill sets of subordinate grades of the labor class. DUTIES AND RESPONSIBILITIES Must comply with OSHA standards and BAE best safety practices. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor. Personnel are accountable for completion of daily work assignments. Keep your work area clean and safe at all times, especially at the end of the shift. Understand relevant work processes, operation of equipment, and complete tasks proficiently. Use appropriate sections of IEE, ABS, Coast Guard and manufacturer’s tech manuals and ship’s information book in repairing electrical equipment and installing electrical equipment. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor. Work shifts and overtime as assigned. Comply with the Company’s “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. Carry out instructions furnished in written, oral, or diagram form. Resolve unexpected events related to your assigned task in a professional manner. Work Tasks Include: 1. Running cables, lines and leads, terminations/connector fabrication, packing of cable transits and harnessing cables aboard vessels., 2. Prepares work area, drills holes, grinds metal surfaces, inspect and reports on cableway and electrical equipment conditions, tests and reports results on electrical equipment., 3. Test internal circuits of major units of electrical equipment for continuity, short circuits, and grounds and measure electrical quantities and compare with established values., 4. Inspect trip shafts, toggle linkages and all other mechanical parts to see that they operate freely without binding., 5. Inspect mechanical and electrical connections including mounting bolts and screws; draw out disconnect devices and control wiring., 6. Detect and locate grounds, open circuits and short circuits in distribution generators and systems. Maintain and repair telephones, circuits, and associated equipment., 7. Install new power and lighting circuits., 8. Must be familiar with all safety procedures pertaining to or where to obtain electrical procedures. Must be very knowledgeable of work/safety procedures and manual., 9. Implement Lock-out Tag-out for work being performed. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12’ from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. 40 hours a week/ OT on approval Comments for Suppliers: Company DescriptionWe hire candidates for the shipyard industry.We hire candidates for the shipyard industry.

Budweiser - - Responsibilities: Ensure loads are built and loaded accurately in a timely manner; Build stable pallets, utilizing correct pallet building ties to lock in product; Use scan-to-pick technology to ensure product accuracy and pick quantities; Load and unload delivery and over-the-road tr

ServiceMaster Clean - - Responsibilities: Clean and disinfect facilities using provided products, tools and procedures; Maintain inventory of supplies and equipment; Open and lock facilities, enable and disable security system as required; Use proper PPE where required; Contribute to a positive wor

• Day-1 Medical, Dental, Vision Benefits for eligible colleagues, • Competitive Pay, • Paid Time Off, • Flexible Holiday Time-Off & Flexible Scheduling, • Instant access to earned wages with PayActiv, • Enhanced benefits: pet, home & auto insurance & more, • 401(k) plan options available, • Bonus earning opportunities, • Growth potential opportunities, • Employee Discount at Bloomingdale's & Macy's Stores About Bloomingdale's makes fashion personal and fun, aspirational yet approachable. Our mission is to guide and inspire our customers to make style a source of creative energy in their lives. We will always strive to make Bloomingdale's like no other store in the world. Across all brand touchpoints-from Bloomingdales.com to our newest small store concept, Bloomie's-everyone plays a critical role bringing our mission to life. Our inclusive culture promotes diversity of background, thought and opinion. Regardless of position, we believe all colleagues have a voice and access to share their thoughts with every level of leadership. Our colleagues are passionate, driven, entrepreneurial and collaborative, while having a lot of fun along the way. Job Overview As a Bloomingdale's Asset Protection Practitioner, you are responsible for protecting the assets and people of your location. Our Asset Protection training program will provide you with the knowledge and tools to do the job while you grow in responsibility. Use innovative technology and dive deep into analytics as you exercise your investigative skills on our asset protection team. Each Practitioner is charged with maintaining a high degree of professionalism in the execution of their duties within the store. Essential Functions • Leadership - help facilitate and communicate the overall AP/ effort and shortage reduction within store; ensure store compliance with AP plans and shortage programs., • Developing Partnerships - develop an open line of communication with both AP and store colleagues, central and corporate executives; build positive business relationships., • Training and Awareness - facilitate training of store colleagues and leadership; shortage & theft mitigation, operational and procedural compliance; through in-store execution, meetings, Next Gen, and other communication methods., • Administration & Technical Skills - utilize and leverage reporting & data to facilitate shortage control programs and theft mitigation efforts. Drive execution and compliance with all policies and processes to ensure the protection of our stores, colleagues, customers and property., • Network with other retailers, local law enforcement, mall management, and legal counsel., • Provide a safe environment for customers and colleagues. Ensure compliance to the safety program. Education/Experience: • High school Diploma or equivalent required., • Excellent communication skills - ability to identify and communicate site-specific ideas and programs., • Ability to work with all levels of management., • Working knowledge of the physical security aspects of the job including alarms, EAS, CCTV, and lock and key., • Ability to make solid business decisions, make recommendations and implement necessary changes., • Highly organized and ability to adapt quickly to changing priorities., • Must be a team player. This job description is not all inclusive; additionally, Macy's, Inc. reserves the right to amend this job description at any time. Macy's, Inc. - including Macy's, Bloomingdale's, and Bluemercury - is an equal opportunity employer, committed to a diverse and inclusive work environment.

A mortgage company is looking for a Lock Desk Specialist to join their growing team! The Lock Desk associate is responsible for managing mortgage rate locks and ensuring accurate pricing throughout the loan process.

Job DescriptionBenefits: • 401(k), • Employee discounts, • Flexible schedule Coffee, people, and positive community involvement is what we focus on at Bird Rock Coffee Roasters. We are looking for positive and energetic team-players with outstanding service skills who are driven and passionate about coffee and people. Bird Rock Coffee Roasters has an extensive training program where you will learn from some of the best! Customer Service/Lead Duties & Responsibilities Include: Greet and interact with all customers ensuring everyone leaves with an elevated experience Maintain a positive demeanor in a busy environment where multi-tasking, cleaning, and effective communication are requirements. Prepare batch brew, pour over coffee & all crafted beverages/food items according to our standards of quality. Maintain coffee knowledge on all current offerings, and confidently communicate product information to customers. Share coffee passion and knowledge with the team by assisting with store coffee tastings Properly handle and maintain all coffee brewing equipment. Follow cash register policies and procedures including handling cash. Communicate with team members and management to solve problems and improve service. Count store cash drawer and safe daily. Prepare and record cash deposits. Delegate team member daily breaks and ensure all labor laws are being followed. Lock and unlock store when scheduled accordingly. Coach to company quality and customer service standards Please follow these steps to apply to all Bird Rock Coffee Roasters jobs • Click on your desired role/location that you are interested in working at. If you are open to working at multiple cafe locations, please note to the hiring manager any of our other 6 locations you are willing to work at., • Follow the instructions to upload your resume and complete your user profile in our hiring database., • You will be contacted back shortly with a quick assessment to be filled out, then an interview will be set up as the final step before onboarding and training.

Job Description Labor One is hiring Journey-Level Shipfitters for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for performing, with minimal supervision, steel and aluminum structural work in all stages of repair and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships and barges. The position requires a working knowledge of procedures, strong mechanical aptitude and ability and be able to follow directions. The individual must possess experience in the trade, knowledge of ship terminology, blueprint reading, measurements, and the ability to interpret job specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Ability to comprehend instructions, drawings, and general correspondence., 2. Comprehensive understanding of ship repair terminology and ship compartment location nomenclature., 3. Be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Ability to write comprehensive Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 5. Ability to effectively confer job related information to the structural supervisor and small groups., 6. Ability to read and interpret structural drawings (including weld symbols), sketches, specifications, and NavSea standard items and Navy damage control diagrams., 7. Experience fabricating templates, squaring plates, scribing in structures, and installing perpendiculars on ships in accordance with drawings, specifications, or sketches., 8. Experience using oxy-acetylene torch for cutting and washing., 9. Welding experience: SMAW (S-11A) (fillet) FCAW (S-1) (fillet) GMAW (S-25) (fillet), 10. Experience using hand and power tools safely including but not limited to mauls, grinders, circular and reciprocating saws, and hand and magnetic drill., 11. Understand the proper use and operation of structural shop fabrication equipment, including shears, punches, and brakes., 12. Possess a working understanding of the aluminum 5XXX process., 13. Ability to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system., 14. Possess a working knowledge of, and be able to take measurements using the metric system., 15. Four (4) years of related experience. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and the shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 3. Work shifts and overtime as assigned., 4. Keeping the work area clean and safe at all times, especially at the end of the shift., 5. Understand relevant work processes, operation of equipment, and complete tasks proficiently., 6. Complete daily work assignments and provide status of unfinished work for shift turnover., 7. Use appropriate sections of NAVSEA, ABS, Coast Guard standards and manufacturer's tech manuals., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Carry out instructions furnished in written, oral, or diagram form. Resolve unexpected events related to your assigned task in a professional manner. Work Tasks Include: a. Prepare the work area for hot work. Coordinate efforts with the fire watch. b. Measure, lay out, and mark structures to be removed using drawings, specifications, shop sketches, or direction from the structural supervisor. c. Cut out existing structures as required by the drawings or specifications, or as directed by the supervisor. d. Construct templates and fabricate foundations or other structures. e. Install prefabricated foundations and structures in accordance with drawings and specifications. f. Install aluminum in accordance with 5XXX standards. g. Direct and monitor the activities of assigned helpers or improvers. h. Remove remnants flush in preparation for new structures or succeeding production tasks. i. Run and remove lines and leads as required to accomplish work and in accordance with OSHA and the shipyards safety standards. j. Implement Lock-out Tag-out for work being performed. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 3rd Shift 40 Hours a week / OT with approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

The System Experience Test Engineering team is looking for a driven and dedicated software engineer. From Lock Screen and Notifications to Spotlight and Settings, the System Experience team is responsible for ensuring the quality of Apple’s ecosystems, as well as the apps and frameworks that drive

Job Description Labor One is hiring Journey-Level Sheetmetal Fitters for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description:This position is responsible for performing, with minimal supervision, sheet metal repairs and installation on maritime vessels such as Navy Ships, Military Sealift Command ships, and commercial vessels. Repairs and installation include shipboard and shop tasks required to plan, layout, fabrication, and assemble various sheetmetal structures throughout the ship. The position requires a comprehensive understanding of ship terminology, blueprint reading, measurements, and the ability to interpret job specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a comprehensive understanding of ship repair terminology and ship compartment location nomenclature., 3. Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must possess the ability to write comprehensive Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 5. Must be able to effectively confer job related information to the structural supervisor, improvers, and helpers., 6. Must be able to read and interpret structural drawings, sketches, and specifications., 7. Must be able to interpret appropriate sections of NAVSEA, ABS, Coast Guard standards and manufacturer's tech manuals., 8. Must have experience repairing and installing shipboard habitability spaces including: berthing equipment; galley equipment; ventilation ducting (heating and cooling); and joiner doors in accordance with drawings, specifications, and sketches., 9. Must understand the principle of balancing air systems including taking proper readings and documenting the results., 10. Must have experience using hand and power tools and understand the operation of fabricating machines such as shears, brakes, presses, forming rolls and routers., 11. Must have experience tack welding using SMAW or GMAW., 12. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 13. Six (6) years of related experience, three (3) of which were in the maritime environment. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and the shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor. 3. Work shifts and overtime as assigned., 3. Keeping the work area clean and safe at all times, especially at the end of the shift., 4. Complete daily work assignments and provide status of unfinished work for shift turnover., 5. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 6. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 7. Carry out written and verbal instructions., 8. Resolve unexpected events related to your assigned task in a professional manner. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift 40 hrs per week/ OT available per HM approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Journey-Level Shipfitters for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for performing, with minimal supervision, steel and aluminum structural work in all stages of repair and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships and barges. The position requires a working knowledge of procedures, strong mechanical aptitude and ability and be able to follow directions. The individual must possess experience in the trade, knowledge of ship terminology, blueprint reading, measurements, and the ability to interpret job specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Ability to comprehend instructions, drawings, and general correspondence., 2. Comprehensive understanding of ship repair terminology and ship compartment location nomenclature., 3. Be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Ability to write comprehensive Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 5. Ability to effectively confer job related information to the structural supervisor and small groups., 6. Ability to read and interpret structural drawings (including weld symbols), sketches, specifications, and NavSea standard items and Navy damage control diagrams., 7. Experience fabricating templates, squaring plates, scribing in structures, and installing perpendiculars on ships in accordance with drawings, specifications, or sketches., 8. Experience using oxy-acetylene torch for cutting and washing., 9. Welding experience: SMAW (S-11A) (fillet) FCAW (S-1) (fillet) GMAW (S-25) (fillet), 10. Experience using hand and power tools safely including but not limited to mauls, grinders, circular and reciprocating saws, and hand and magnetic drill., 11. Understand the proper use and operation of structural shop fabrication equipment, including shears, punches, and brakes., 12. Possess a working understanding of the aluminum 5XXX process., 13. Ability to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system., 14. Possess a working knowledge of, and be able to take measurements using the metric system., 15. Four (4) years of related experience. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and the shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 3. Work shifts and overtime as assigned., 4. Keeping the work area clean and safe at all times, especially at the end of the shift., 5. Understand relevant work processes, operation of equipment, and complete tasks proficiently., 6. Complete daily work assignments and provide status of unfinished work for shift turnover., 7. Use appropriate sections of NAVSEA, ABS, Coast Guard standards and manufacturer's tech manuals., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. -The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift Only 40 hours a week / OT on approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Sheetmetal Fitter Improvers for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description:Under supervision of a supervisor or Journeyman, this position is responsible for the removal, assembly, installation and repair of sheetmetal products and equipment such as HVAC ducting, furniture, nonstructural bulkhead systems and ceiling systems in berthing, heads, living spaces, and food service areas on maritime vessels such as Navy Ships, Military Sealift Command ships, and commercial vessels. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment location nomenclature., 3. Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to write Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item., 5. Must be willing and able to carry out written and verbal instructions provided by the supervisor and journeyman., 6. Must be able to interpret appropriate sections of NAVSEA, ABS, Coast Guard standards and manufacturer's tech manuals., 7. Must have experience repairing and installing berthing equipment; galley equipment; ventilation ducting (heating and cooling); and joiner doors., 8. Must have experience using hand and power tools and understand the operation of fabricating machines such as shears, brakes, presses, forming rolls and routers., 9. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 10. Four (4) years of related experience, one (2) of the years in a maritime environment. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and the shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 3. Work shifts and overtime as assigned., 4. Keeping the work area clean and safe at all times, being aware of the added responsibility for fire prevention., 5. Complete daily work assignments and provide status of unfinished work to the supervisor and journeyman., 6. Assist with documenting Objective Quality Evidence (OQE) as required by the work specifications., 7. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 8. Resolve unexpected events related to your assigned task in a professional manner. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. -----The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. -The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift 40 hrs per week/ OT available per HM approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Journey-Level Outside Machinists for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for removing, installing, and testing main and auxiliary shipboard equipment including but not limited to: Main Reduction Gears (MRG), pumps, valves, hydraulic equipment, steam equipment, valves, propellers, bearings, etc. on maritime vessels including US Navy, Military Sealift Command, and commercial. The work occurs in various stages of repair and modernization and requiring the ability to operate a wide variety of tools and machinery, and the ability to read and comprehend specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have comprehensive understanding of ship repair terminology and ship compartment location nomenclature., 3. Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to write comprehensive Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 5. Must be able to work from Process Control Procedures (PCP)., 6. Must be able to use precision measurement tools., 7. Must be able to effectively confer job related information to the structural supervisor and small groups, and provide technical guidance to Helpers and Improvers., 8. Must be able to interpret drawings, sketches, tech manuals, and user manuals to the extent necessary to remove, repair, and install equipment., 9. Must understand the NAVSEA standard items, especially 009-04 for tests, inspections, and check points; 009-23 for interferences; and 009-24 for blanking and match marks., 10. Must have a comprehensive understanding of Lock-out / Tag-out procedures., 11. Must understand laser alignment., 12. Must understand reverse indicator alignment procedures., 13. Must understand the proper and safe use and operation of the hand and power tools required to accomplish the work., 14. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system and the metric system., 15. Six (6) years of machinist experience, two (2) of which in the maritime environment. DUTIES AND RESPONSIBILITIES 1. Comply with OSHA standards and the shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the supervisor. 3. Work shifts and overtime as assigned., 3. Keep the work area clean and safe at all times, especially at the end of the shift., 4. Complete work assignments as scheduled and provide status of unfinished work for shift turnover., 5. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 6. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which requires that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that personnel may encounter every day in the course of performing work on ships, piers, docks. While performing the duties of this position the employee is regularly required to: stand; walk; use hands and fingers to handle directly or work from touch; reach out with arms; climb; stoop; kneel; crouch; crawl; and communicate in a loud environment. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: Candidates may be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift 40 hours a week / OT on approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Journey-Level Pipefitters for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM Job Description: A pipefitter journeyman is responsible for removing, repairing, targeting, laying out, fabricating, installing, and testing marine piping systems such as Auxiliary Salt Water, Fire Main, Potable Water, Hydraulic, Compressed Air, Fuel Oil, Lube Oil, Engine Exhaust etc. in accordance with work item specifications, NAVSEA/Military standards and drawings or other regulatory body standards such as ABS, Military Sealift Command, etc. Repair and fabrication include the use of various shop equipment such as table saws, pipe threading machines, bending machines (power as well as hand operated), drill presses and brazing equipment. Additional tasks associated with this position include blanking and pressure testing of tanks (structural boundary testing). The journeyman is also responsible for providing direction to improvers and helpers as directed by the supervisor. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a comprehensive knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found reports in writing that include recommended corrective action., 5. Must have a thorough knowledge of experience with P-73 joint fit-up., 6. Must have a comprehensive knowledge of Silver Brazing theory., 8. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 9. Must possess a comprehensive knowledge of equipment and work processes used in marine pipe fabrication, repair, and targeting., 10. Must be able to operate and care for equipment, portable power tools, and hand tools used to accomplish assigned work., 11. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 12. Must have six (6) years of pipefitting experience, four (3) of which in the maritime repair environment. DUTIES AND RESPONSIBILITIES 1. Provide direction to a pipefitter Improver and Helper if assigned., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor., 3. Work shifts and overtime as assigned., 4. Be accountable for completion of daily work assignments., 5. Comply with OSHA standards and the shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Confer with the supervisor to resolve unexpected events related to your assigned task. Carry out written or oral instructions. Work Tasks Include: a. Inspect and prepare the area for work, taking special care if hot work is required. Verify gas free certifications and tag-outs, before commencing any work. b. Run lines and leads required to accomplish work. Accomplish drop test if using flammable or oxygen depleting gases. c. Inspect work for defects before turning the job over to welders. Correct fit-ups as required.. Confer with supervision before correcting deficiencies. d. Document existing conditions before commencing work using Condition Found Reports (CFR). e. Remove damaged pipe in accordance with drawings and specifications. f. Measure or template pipe for fabrication. g. Blank systems in accordance with standard Item 009-24 or other applicable safety standards. h. Fit up new pipe using the proper fit up type in accordance with specifications. i. Ensure a strain free fit-up to pumps or other connecting equipment. j. Blank tanks and accomplish boundary air tests. k. Accomplish or verify Lock-out Tag-out requirements before commencing. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 75 lbs on an occasional basis (0-25% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (25-75% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. Must be available for day or night shift. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Participates daily in food preparation, cooking, plating, cashiering and guest relations while intermittently supervising and directing others, in the absence of the General Manager and Assistant Manager. • Serves as back up to crew members and covers breaks as needed., • Ensures that all food and beverages are made and presented according to Yoshinoya specifications, procedures, and safe handling requirements., • Completes reports as directed by the General Manager., • Follows proper merchandise storage procedures, including labeling procedures., • Responds to customer complaints per company policy, contacting management when refunds are necessary., • Effectively trains the staff, and monitors activities throughout the shift, providing consistent feedback., • Ensures all orders are quickly put away and all items are rotated based upon FIFO (first in/first out) method., • Ensures all cash handling and procedures are consistently enforced., • Ensures the restaurant is clean and that all machinery is properly functioning., • Ensures a safe work environment, reporting any injuries as they occur., • Monitors and verifies change funds., • Communicates effectively with staff and management., • Assists GM placing coin orders, makes multiple cash drops, counts sales, and makes deposits into the double lock safe for the armored car carrier., • Fluent in English (written and verbal), • Ability to:, • read and comprehend simple instructions, short correspondence, and memos., • write simple correspondence., • speak effectively to customers., • add, subtract, multiply, and divide with 10’s and 100’s, and be able to perform these functions with American currency., • follow company procedures., • interact with customers and coworkers. SUPERVISORY RESPONSIBILITIES: • Crewmembers, • High School graduate or equivalent

Job Description Labor One is hiring Outside Machinist Improvers for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for removing, installing, and testing main and auxiliary shipboard equipment including but not limited to: Main Reduction Gears (MRG), pumps, valves, hydraulic equipment, steam equipment, valves, propellers, bearings, etc. on maritime vessels including US Navy, Military Sealift Command, and commercial. The work occurs in various stages of repair and modernization and requiring the ability to operate a wide variety of tools and machinery, and the ability to read and comprehend specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have basic print (drawing) reading and interpretation skills., 3. Must have a working understanding of ship repair terminology and ship compartment location nomenclature., 4. Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 5. Must be able to write reports describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 6. Must be able to work from Process Control Procedures (PCP)., 7. Must be able to use precision measurement tools., 8. Must be able to effectively confer job related information to the structural supervisor and small groups, and provide technical guidance to Helpers and Improvers., 9. Must have a basic understanding of drawings, sketches, tech manuals, and user manuals., 10. Must understand the NAVSEA standard items, especially 009-04 for tests, inspections, and check points; 009-23 for interferences; and 009-24 for blanking and match marks., 11. Must have a comprehensive understanding of Lock-out / Tag-out procedures., 12. Must understand the proper and safe use and operation of the hand and power tools required to accomplish the work., 13. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system and the metric system., 14. Three (3) years of machinist experience, preferably one (1) of which is in the maritime environment. DUTIES AND RESPONSIBILITIES 1. Comply with OSHA standards and the shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the supervisor., 3. Work shifts and overtime as assigned., 4. Keep the work area clean and safe at all times, especially at the end of the shift., 5. Complete work assignments as scheduled and provide status of unfinished work for shift turnover., 6. Assist with the preparation of Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 7. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which requires that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 8. Receive technical guidance and carry out directions from a Journeyman or Supervisor., 9. Carry out instructions furnished in written, oral, or diagram form. Resolve unexpected events related to your assigned task in a professional manner. Work Tasks Include: a. Prepare a safe work area especially as it relates to fire prevention. b. Assist in the coordinate work with other crafts to disconnect and remove equipment. c. Compile as-found reports identifying the status of equipment prior to work. d. Assist with in-place valve repairs. e. Assist with material take offs with adequate information for ordering. f. Assist with equipment alignment. g. Assist with operational tests. h. Keep blanking logs up to date. i. Run and remove lines and leads as required to accomplish work and in accordance with OSHA and the shipyards safety standards. j. Assist with Lock-out Tag-out activities for work being performed. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that personnel may encounter every day in the course of performing work on ships, piers, docks. While performing the duties of this position the employee is regularly required to: stand; walk; use hands and fingers to handle directly or work from touch; reach out with arms; climb; stoop; kneel; crouch; crawl; and communicate in a loud environment. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: Candidates may be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 1st Shift 40 hours a week. Overtime with Supervisors approval. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionBenefits: • 401(k), • Competitive salary, • Employee discounts, • Flexible schedule, • Opportunity for advancement Coffee, people, and positive community involvement is what we focus on at Bird Rock Coffee Roasters. We are looking for positive and energetic team players with outstanding service skills who are driven and passionate about coffee and people. Bird Rock Coffee Roasters has an extensive training program where you will learn from some of the best! Barista/Customer Service/ Key Holder Duties & Responsibilities Include: Greet and interact with all customers providing everyone with an excellent experience in our stores. Maintain a positive demeanor in a busy environment where multi-tasking, cleaning, and effective communication are requirements. Prepare batch brew and pour over coffee according to our standards of quality. Maintain coffee knowledge on current offerings and confidently and accurately communicate product information to customers. Taste coffee each shift worked to improve product knowledge. Properly handle and maintain all coffee brewing equipment. Follow cash handling and cash register policies and procedures. Communicate with team members and management to solve problems and improve service. Count store cash drawer and safe daily. Prepare and record cash deposits. Delegate team member daily breaks and ensure all labor laws are being followed. Lock and unlock store when scheduled accordingly. Requirements: • Customer service experience, • Cafe/barista experience, • Weekend/evening availability, • 25-30 hours a weekPlease follow these steps to apply to all Bird Rock Coffee Roasters jobs, • Click on your desired role/location that you are interested in working at. If you are open to working at multiple cafe locations, please apply to any and all that you would like to be contacted back about. Make sure to note to the hiring manager any and all other locations you have applied to., • Follow the instructions to upload your resume and complete your user profile in our hiring database., • You will be contacted back shortly with a quick assessment to be filled out, then an interview will be set up as the final step before onboarding and training. See you soon and thank you for your time!!

Job Description Labor One is hiring Journey-Level Specialty Welders (Alum, CuNi, Stainless; TIG) for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for welding pipe of various metals on a ship or in a shop to support mechanical repairs and modernization of marine vessels including US Naval, Military Sealift Command, and commercial ships. The journeyman welder is also responsible for providing direction to assigned helpers. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found by writing condition reports that include recommended corrective action., 5. Must have a thorough knowledge of SMAW, FCAW, and GMAW theory., 6. Must be able to certify in P-3 joint with permanent backing ring, and P-14 socket weld joint:, 7. SMAW, 8. GTAW, 9. FCAW OR, 10. Silver Brazing, 11. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 12. Must possess a working knowledge of equipment and work processes used in marine pipe welding., 13. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 14. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 15. Must have four (4) years of pipe welding experience. DUTIES AND RESPONSIBILITIES 1. Provide direction to a pipe welding helper, if assigned, as needed to complete the assigned tasks., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor., 3. Work shifts and overtime as assigned., 4. Be accountable for completion of daily work assignments., 5. Comply with OSHA standards and the shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 1st shift 40 hours per week/OT per HM approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is Structural Welders for Ship Repair project in San Diego, California. (4) years of welding experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM Job Description: This position is responsible for accomplishing, with minimal supervision, production welding on a ship or in a shop to support structural repairs and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information to the supervisor., 5. Must understand SMAW, FCAW, and GMAW., 6. Must be able to certify in all positions: • SMAW Full Penetration weld with permanent backing (ceramic and metal), • FCAW Full Penetration weld with permanent backing (ceramic and metal), • GMAW Full Penetration weld with permanent backing (ceramic and metal) 7. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standards manuals., 8. Must possess a working knowledge of welding equipment and work processes used in marine welding., 9. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 10. Be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals., 11. Must understand the US customary and metric measurement system., 12. Must have up to four (4) years of welding experience in a related field. DUTIES AND RESPONSIBILITIES 1. Communicate with and provide direction to the welding helper and fire watch as needed to complete the assigned tasks., 2. Communicate explicitly with the Fire Watch and do not commence hot work until the area is ready in accordance with fire prevention protocol. ., 3. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 4. Work shifts and overtime as assigned., 5. Be accountable for completion of daily work assignments.6. Comply with OSHA standards and the shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 8. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 3rd Shift 40 hours a week/OT on approval Testing 2G/3G Flux Core (2 plates Only) Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionCompany Description Fairmont Hotels & Resorts Join a dynamic team and be part of a network of 90 spectacular properties, and 34 more in the pipeline, in 30 countries around the globe. Our properties are located from the beaches of Hawaii, to the unspoiled national parks of Canada, to the heart of London, to the deserts of the United Arab Emirates. About Fairmont Grand Del Mar Breathe deeply, dream wildly, and discover a soulful sanctuary where finding yourself comes naturally. Magic sits around every corner and within every conversation. It enchants through the charm of Los Peñasquitos Canyon and the sunshine of San Diego. It’s where classic meets cool, the fine unwinds into fun and inspiration leads to immersion. Bask in the San Diego sunshine and enjoy our five-star setting at Fairmont Grand Del Mar. Immersed in nature, the resort hosts 249 elegantly appointed guestrooms and suites, an 18-hole private Tom Fazio-designed golf course, a five-star spa and offers two dozen weekly outdoor activities across the 400 acres of dramatic canyon scenery including yoga, meditation and archery. The Grand includes six different dining venues, including San Diego’s only three-Michelin starred restaurant, Addison. Growth and advancement are not only accessible but actively encouraged. We promote a balanced life for our colleagues and continually seek new ways to enhance our environment and support our beautiful home of San Diego. About the Application Process: At Fairmont, we want to bring out your highest potential. Shortly after applying, you will receive an email from our partner AssessFirst prompting you to create a profile and complete a questionnaire. This is a mandatory step for your candidacy to be considered as it enables us to explore your compatibility with this role and our culture of luxury excellence. What is in it for you: • Employee benefit card offering discounted rates in Accor worldwide for you and your family, • Learning programs through our Academies designed to sharpen your skills, • Ability to make a difference through our Corporate Social Responsibility activities, • Career development opportunities with national and international promotion opportunities. The sky is your limit., • Rate of Pay: $23.30/ hour USDJob Description Guardian and Protector. You ensure the safety and wellbeing of your fellow employees, guests and visitors. You are attentive, efficient and committed, and will ensure your property remains a safe, enjoyable workplace and travel destination. What you will be doing: • Other tasks or projects as assigned by hotel management and staff., • Follow proper payroll procedures., • Actively participate in the day to day security operations of the property to ensure the safety and security of all guests, personnel and property., • Patrol the interior and exterior of the hotel and confront any situations or persons that require investigation., • Handle and document guest and employee accidents, guest room lock problems, noise complaints, and any questionable individuals on the premises., • Assist disabled guests., • Implement all policies, procedures and instructions regarding security and safety., • Assist in implementing preventive safety and security programs., • Investigate crimes committed against the hotel, guests, and employees., • Document all incidents occurring in the hotel in connection with crime, subversions, potential liabilities and insurance requirements. And in documenting such activities remain objective, and write comprehensive reports., • Assist hotel staff in handling of unusual guest or employee problems, such as, but not limited to, disorderly conduct, thefts, suicides, bomb threats, employee or guest accidents, fire or safety hazards, robberies, terrorist activities, civil disturbance, power or elevator failures, medical assistance and natural disasters., • Remain informed of current Federal and local laws and regulations as they relate to the hotel, particularly in areas of guest, patron and employee rights., • Take an active role in the implementation of the hotel's fire plan including the General Communication Center, the Command Post, all technical equipment and the roles each employee/manager plays., • Assist in training related to the hotel's emergency procedures., • Control the key, lock system, alarm system, and fire protection system., • Make recommendations to the Director in security related matters., • Respond properly in any hotel emergency or safety situation., • Safety Inspections throughout the hotel., • Conduct V.I.P. escorts in a professional and courteous manner., • Monitor the Closed Circuit Television (CCTV), and if needed review the footage.Qualifications, • Oral proficiency in the English language., • Experienced in CPR, AEDs, first aid, firefighting and crowd control., • Previous experience in law enforcement, military; luxury hospitality security experience preferred. Must have knowledge of commonly-used concepts, practices, and procedures within the security/safety field., • Excellent customer service skills., • Experienced in the following computer programs: MS Outlook, MS Word, MS Excel, and have a basic understanding of computer operations., • Must have the ability to drive company vehicles and golf carts., • Must be open to a flexible schedule to include weekends and holidays., • Must maintain a neat, clean, and well-groomed appearance per Fairmont Grand Del Mar grooming standards. Additional Information Employee Benefits: Join our team and enjoy a range of exclusive colleague perks, including complimentary upgrades, extended stays, discounted stays across Fairmont & Raffles properties, special dining and wellness discounts, and added luxuries to enhance your experience. We believe in taking care of our team, ensuring that your hard work is rewarded with exceptional benefits. Add any other benefits relevant to your property. Our Values Respect: We value the needs, ideas and individuality of others. We treat everyone with fairness and dignity. Excellence: We make genuine connections, and we cherish every opportunity to make the people around us feel special. Belonging: We celebrate our differences. We support each other and we always stand together. Empowerment: We have authority to take initiative and anticipate moments that create unforgettable experiences. Integrity: We build trust through mutual respect and being authentic. Diversity & Inclusion Fairmont is committed to creating an inclusive environment where diverse talent thrives. We welcome candidates from all backgrounds to join our team.

Job DescriptionLabor One is hiring Journey-Level Specialty Welders (Alum, CuNi, Stainless; TIG) for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information This position is responsible for welding pipe of various metals on a ship or in a shop to support mechanical repairs and modernization of marine vessels including US Naval, Military Sealift Command, and commercial ships. The journeyman welder is also responsible for providing direction to assigned helpers. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found by writing condition reports that include recommended corrective action., 5. Must have a thorough knowledge of SMAW, FCAW, and GMAW theory., 6. Must be able to certify in P-3 joint with permanent backing ring, and P-14 socket weld joint:, 7. SMAW, 8. GTAW, 9. FCAW OR, 10. Silver Brazing, 11. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 12. Must possess a working knowledge of equipment and work processes used in marine pipe welding., 13. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 14. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 15. Must have four (4) years of pipe welding experience. DUTIES AND RESPONSIBILITIES 1. Provide direction to a pipe welding helper, if assigned, as needed to complete the assigned tasks., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor., 3. Work shifts and overtime as assigned., 4. Be accountable for completion of daily work assignments., 5. Comply with OSHA standards and the shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Confer with the supervisor to resolve unexpected events related to your assigned task. Carry out written or oral instructions. Work Tasks Include: a. Inspect and prepare the area for hot work, including gas free certifications and tag-outs, before commencing any hot work. b. Prepares work area for production welding by inspecting joints and cleaning as required. c. Inspect welds for defects. Confer with supervision before correcting deficiencies. d. Document existing conditions using Condition Found Reports. e. Ensure gas free certifications are accurate and up to date. f. Assist with Lock-out Tag-out for work being performed. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd shift only 40 hours a week / OT on approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Journey-Level Structural Welders for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description:This position is responsible for accomplishing, with minimal supervision, production welding on a ship or in a shop to support structural repairs and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information to the supervisor., 5. Must understand SMAW, FCAW, and GMAW., 6. Must be able to certify in all positions: • SMAW Full Penetration weld with permanent backing (ceramic and metal), • FCAW Full Penetration weld with permanent backing (ceramic and metal), • GMAW Full Penetration weld with permanent backing (ceramic and metal) 7. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standards manuals., 8. Must possess a working knowledge of welding equipment and work processes used in marine welding., 9. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 10. Be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals., 11. Must understand the US customary and metric measurement system., 12. Must have up to four (4) years of welding experience in a related field. DUTIES AND RESPONSIBILITIES 1. Communicate with and provide direction to the welding helper and fire watch as needed to complete the assigned tasks., 2. Communicate explicitly with the Fire Watch and do not commence hot work until the area is ready in accordance with fire prevention protocol. ., 3. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 4. Work shifts and overtime as assigned., 5. Be accountable for completion of daily work assignments. 6. Comply with OSHA standards and shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 8. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Journey-Level Pipefitters for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: A pipefitter journeyman is responsible for removing, repairing, targeting, laying out, fabricating, installing, and testing marine piping systems such as Auxiliary Salt Water, Fire Main, Potable Water, Hydraulic, Compressed Air, Fuel Oil, Lube Oil, Engine Exhaust etc. in accordance with work item specifications, NAVSEA/Military standards and drawings or other regulatory body standards such as ABS, Military Sealift Command, etc. Repair and fabrication include the use of various shop equipment such as table saws, pipe threading machines, bending machines (power as well as hand operated), drill presses and brazing equipment. Additional tasks associated with this position include blanking and pressure testing of tanks (structural boundary testing). The journeyman is also responsible for providing direction to improvers and helpers as directed by the supervisor. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a comprehensive knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found reports in writing that include recommended corrective action., 5. Must have a thorough knowledge of experience with P-73 joint fit-up., 6. Must have a comprehensive knowledge of Silver Brazing theory., 8. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 9. Must possess a comprehensive knowledge of equipment and work processes used in marine pipe fabrication, repair, and targeting., 10. Must be able to operate and care for equipment, portable power tools, and hand tools used to accomplish assigned work., 11. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 12. Must have six (6) years of pipefitting experience, four (3) of which in the maritime repair environment. DUTIES AND RESPONSIBILITIES 1. Provide direction to a pipefitter Improver and Helper if assigned., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor., 3. Work shifts and overtime as assigned., 4. Be accountable for completion of daily work assignments., 5. Comply with OSHA standards and shipyard's best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Confer with the supervisor to resolve unexpected events related to your assigned task. Carry out written or oral instructions. Work Tasks Include: a. Inspect and prepare the area for work, taking special care if hot work is required. Verify gas free certifications and tag-outs, before commencing any work. b. Run lines and leads required to accomplish work. Accomplish drop test if using flammable or oxygen depleting gases. c. Inspect work for defects before turning the job over to welders. Correct fit-ups as required.. Confer with supervision before correcting deficiencies. d. Document existing conditions before commencing work using Condition Found Reports (CFR). e. Remove damaged pipe in accordance with drawings and specifications. f. Measure or template pipe for fabrication. g. Blank systems in accordance with standard Item 009-24 or other applicable safety standards. h. Fit up new pipe using the proper fit up type in accordance with specifications. i. Ensure a strain free fit-up to pumps or other connecting equipment. j. Blank tanks and accomplish boundary air tests. k. Accomplish or verify Lock-out Tag-out requirements before commencing. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 75 lbs on an occasional basis (0-25% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (25-75% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift only 40 hours a week / OT with approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionSalary: $210,000 to $220,000 Who Are We? Founded in 1997 and built upon 27+ years of dermatology-specific experience, we are the only full-service dermatology CRO that takes products from concept to approval. Voted one of San Diegos Top Workplaces, we take pride in maintaining a company culture that values collaboration, diversity of background and thought, and dedicated talent. When you join Therapeutics, you are not a number or a cog in the wheel, you are valued for your unique and important contributions that you bring to our team and our clients. Who Are You? You are a dedicated individual who is passionate about your work and you want to join a team that believes a company is only as successful as its people. You lead with humility and know that your individual contribution is important so you take pride in delivering great work. You believe anything worth doing, is worth doing right. You communicate clearly and have great attention to detail. You love to collaborate with the team but are able to think on your feet to problem-solve independently. What is the Primary Objective of the Executive Director, Clinical Operations? Reporting to the Senior Vice President of Clinical Development, the Executive Director of Clinical Operations is responsible for oversight of the overall clinical operations strategy, execution and management of clinical studies. Your Main Responsibilities and Duties Include: • You will be responsible for driving and leading the successful execution of all operational components of the Companys clinical programs utilizing strong project management, leadership, and organizational skills; partnering with internal and external stakeholders to drive robust data-driven decisions., • You will be accountable for operational execution and strategy across multiple clinical programs, including developing and executing study plans, driving efficient start-up activities and study recruitment, and trial site management., • You will lead the development and continuous improvement of SOPs, functional systems, processes, tools relevant to the Clinical Development organization and adherence to established laws, regulations, and guidelines., • Key activities include strategy and planning towards milestones, managing the supporting clinical operations team, hands-on management of external vendors, driving critical path activities, proactively identifying issues and resolving conflicts., • Additionally, you will be responsible for programmatic resource and financial planning / forecasting and budget management., • You will collaborate with internal and external stakeholders to ensure strategic alignment of objectives, develop operational strategy, and execute clinical programs on time and within budget., • You will review and approve study-related materials including protocols, informed consent forms, monitoring plans, site training materials, EDC/case report forms, study, lab and pharmacy manuals, data management plans, monitoring reports, etc. as needed., • You will oversee study-related activities including site identification and selection, enrollment models, clinical supply planning and drug supply, lab kits, investigator and vendor meetings, development of systems, review of data during the study, data cleaning, database lock, etc., • You will proactively identify project risks before they arise and develops contingency plans; escalate issues related to quality, timelines, and budget and provide recommendations., • You will collaborate with legal and finance (and others as needed) on the development and management of study specific agreements (i.e. non-disclosure agreements, contract negotiation and development, clinical trial agreements, payment terms, milestones, etc.), • You will directly mentor, coach and develop senior level clinical operations staff. To Succeed in this Position: • You should have at least 15 years of experience working in a clinical operations role, with at least 8 years in study management. At least 5-7 years in direct people management is preferred. Experience working in dermatology or ophthalmology drug development ideal but not required., • You should have at least 10 years of experience with monitoring of budget and progressive clinical trial management across the full-cycle of drug/device development (e.g. Phase 1 through Phase 4, etc.). Solid understanding of drug/device development is required., • You should have a proven track record of leadership and success at the Senior Director level., • You should have a good project management and organizational skills, attention to detail and time-management., • You should have a good understanding of FDA and ICH GCP guidelines to ensure the appropriate conduct of clinical studies., • You should have excellent verbal and written communication skills., • You should be a team player who is willing to roll up your sleeves to get the job done. Please note this is a San Diego based position. Candidates will be required to be onsite per our Company's hybrid schedule. We at Therapeutics, Inc. are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and team members without regard to race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law.If you are smart and good at what you do, we welcome you to apply!

Job Description Real Estate Acquisition Specialist (High-Performance Sales Role) San Diego, CA 92108 Commission-Based (High Earning Potential) About Realtern Realtern is a fast-growing real estate investment company focused on delivering high-quality, pre-vetted opportunities to investors. We don’t operate like traditional wholesalers—we prioritize integrity, speed, and win-win deal structuring. We’re building a team of sharp, driven individuals who want to master acquisitions, close deals, and grow fast. The Role As a Real Estate Acquisition Specialist, your job is simple: Talk to realtors, analyze opportunities, and lock up deals. You’ll be on the front lines—handling inbound/outbound leads, negotiating directly with sellers/agents, and getting properties under contract. This is a high-performance, commission-driven role for someone who wants to earn based on results—not hours. WHAT WE ARE LOOKING FOR • EXPERIENCE: (General real estate experience, whether wholesaling or traditional real estate.), • Confident on the phone, • Competitive, self-driven, and coachable, • Ability to handle rejection and stay consistent

Job Description Kros-Wise is seeking a full-time Preventative Maintenance System (PMS) Support Technician II in San Diego, CA. Overview: Provide maintenance support for accomplishing a wide range of Preventive Maintenance System (PMS) checks during ships planned maintenance availabilities. Duties & Responsibilities: • Perform a variety of preventative maintenance checks in accordance with prescribed Navy Maintenance Requirement Cards (MRCs)., • Validate system/equipment tag out/lock out as required., • Comply with all and PPE requirements as required for assigned maintenance., • Utilize a range of basic hand tools to accomplish assigned maintenance checks., • Advise PMS Lead of any equipment and/or material deficiencies encountered during the performance of assigned maintenance., • Advise PMS Lead of any system/equipment not tagged out as required by MRC., • Advise PMS Lead of all assigned maintenance completed in its entirety., • Pre-stage maintenance enclosures/trailers with required tools, material and PPE as required for upcoming scheduled ships maintenance availabilities., • Advise PMS Lead of any maintenance tools, material and/or PPE deficiencies., • Be available to perform overtime duties as required to meet ships planned maintenance availability deadlines., • Have active security clearance or ability to obtain Secret security clearance, • High school diploma/equivalent., • Two years related work experience, Navy and or maritime industry preferred., • Able to obtain and maintain access (DBIDS) to military installations and private shipyards., • Prior 3-M Maintenance Person 301 Qualification., • Basic mechanical aptitude and skills., • Knowledge of Lockout Tag-out procedures., • Active listening, effective interpersonal, oral and written communication skills.

Job DescriptionLabor One is hiring Journey-Level Marine Electricians for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for the installation, repair, and hook-up of equipment for electrical services on a ship. The individual must have working knowledge of electrical theory and procedures and the ability to troubleshoot and repair shipboard electrical systems and equipment (600 V and less) in accordance with specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE Must possess the skill sets of subordinate grades of the labor class. DUTIES AND RESPONSIBILITIES -Must comply with OSHA standards and the shipyards best safety practices. --Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) -Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor. Personnel are accountable for completion of daily work assignments. -Keep your work area clean and safe at all times, especially at the end of the shift. -Understand relevant work processes, operation of equipment, and complete tasks proficiently. -Use appropriate sections of IEE, ABS, Coast Guard and manufacturer's tech manuals and ship's information book in repairing electrical equipment and installing electrical equipment. -Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor. -Work shifts and overtime as assigned. -Comply with the Company's “Non-Discrimination and Anti-Harassment ---Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. -Carry out instructions furnished in written, oral, or diagram form. Resolve unexpected events related to your assigned task in a professional manner. Work Tasks Include: 1. Running cables, lines and leads, terminations/connector fabrication, packing of cable transits and harnessing cables aboard vessels., 2. Prepares work area, drills holes, grinds metal surfaces, inspect and reports on cableway and electrical equipment conditions, tests and reports results on electrical equipment., 3. Test internal circuits of major units of electrical equipment for continuity, short circuits, and grounds and measure electrical quantities and compare with established values., 4. Inspect trip shafts, toggle linkages and all other mechanical parts to see that they operate freely without binding., 5. Inspect mechanical and electrical connections including mounting bolts and screws; draw out disconnect devices and control wiring., 6. Detect and locate grounds, open circuits and short circuits in distribution generators and systems. Maintain and repair telephones, circuits, and associated equipment., 7. Install new power and lighting circuits., 8. Must be familiar with all safety procedures pertaining to or where to obtain electrical procedures. Must be very knowledgeable of work/safety procedures and manual., 9. Implement Lock-out Tag-out for work being performed. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. ---The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. -Appropriate --PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. 2nd Shift 40 hours per week / OT per HM approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Get a Head Start and Lock-in your Summer Gig Now! Join the Xin Chao Eatery Team! It's always Pho Season and Xin Chao Eatery at Del Mar Highlands Town Center is HIRING. We're currently looking for servers to work day-time, weekday shifts (morning to afternoon) AND weekends with flexible hours. If you’re looking for a daytime job in a welcoming environment, apply today! About Xin Chao Eatery: At Xin Chao Eatery, we’re passionate about serving authentic, fresh Vietnamese cuisine in a space where guests can enjoy delicious food and quality time with family and friends. The name “Xin Chao” means "Hello" in Vietnamese, and that’s exactly how we want our guests to feel when they walk through our doors – welcomed and at home. We specialize in traditional Vietnamese dishes like pho, spring rolls, banh mi, and popular drinks like boba and Thai tea. Location: 3545 Del Mar Heights Rd, Suite C-5, San Diego, CA 92130 • Restaurant Hours: 10:00 AM to 9:00 PM daily What We Offer: • Family-Owned & Operated, • Stable Schedule & Growth Opportunities, • Paid Training, • Early Access to Pay, • Team Support & Great Culture, • Flexible Hours: We’re hiring for both full-time and part-time positions. Seasonal applicants welcome, • Tips & Employee Discounts: Extra perks for joining our team Your Responsibilities: • Greet guests warmly and help them feel welcome, • Take food & drink orders and offer menu suggestions, • Deliver food (with help from our robot!), clear tables, and maintain cleanliness, • Process payments (cash and credit cards), • Work together to create a smooth and enjoyable dining experience What We’re Looking For: • Reliable – You show up, ready to work, • Friendly, respectful, and a good communicator, • Customer focused, • Willing to learn and take feedback well, • Can multitask during busy shifts, • Restaurant experience is a bonus, but not required By applying to this job, you agree to receive periodic text messages from this employer and Homebase about your pending job application. Opt out anytime. Msg & data rates may apply. Powered by Homebase. Free employee scheduling, time clock and hiring tools.

Job Description Labor One Staffing is hiring Marine Electricians in San Diego! Call or Text Edna -(281) 965-2749 Job Description: This position is responsible for the installation, repair, and hook-up of equipment for electrical services on a ship. The individual must have working knowledge of electrical theory and procedures and the ability to troubleshoot and repair shipboard electrical systems and equipment (600 V and less) in accordance with specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. Work Tasks Include: Running cables, lines and leads, terminations/connector fabrication, packing of cable transits and harnessing cables aboard vessels. Prepares work area, drills holes, grinds metal surfaces, inspect and reports on cableway and electrical equipment conditions, tests and reports results on electrical equipment. Test internal circuits of major units of electrical equipment for continuity, short circuits, and grounds and measure electrical quantities and compare with established values. Inspect trip shafts, toggle linkages and all other mechanical parts to see that they operate freely without binding. Inspect mechanical and electrical connections including mounting bolts and screws; draw out disconnect devices and control wiring. Detect and locate grounds, open circuits and short circuits in distribution generators and systems. Maintain and repair telephones, circuits, and associated equipment. Install new power and lighting circuits. Must be familiar with all safety procedures pertaining to or where to obtain electrical procedures. Must be very knowledgeable of work/safety procedures and manual. Implement Lock-out Tag-out for work being performed. Labor One Staffing is an Equal Opportunity Employer.

Job Description Labor One is hiring Electrician Improvers for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for assisting Journeyman/1st Class electricians with the installation, repair, and hook-up of equipment for electrical services on a ship. The individual must have work knowledge of electrical theory and procedures and the ability to troubleshoot and repair shipboard electrical systems and equipment (600 V and less) in accordance with specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE Must possess the skill sets of subordinate grades of the labor class. Must be able to comprehend instructions, drawings, and general correspondence. Must be able to effectively confer job related information such as conditions found to the journeyman. Must understand Ohms law and its application. Must be able to read and interpret blueprints, electrical diagrams, computer printouts, specifications, and Navy standards manual. Understand appropriate sections of IEE, ABS, Coast Guard and manufacturer's tech manuals and ship's information book regarding electrical equipment. Must possess a thorough understanding of equipment and work processes used in marine electrical repair and system installation. Must be able to operate and care for Electric Shop equipment, portable power tools, and hand tools. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand US standard and metric system measurements. Must have three (3) years of related electrical installation and repair experience. DUTIES AND RESPONSIBILITIES Assist a journeyman/1st Class electrician wit completing assigned tasks successfully. Provide direction to a Helper/3rd Class electrician to help complete assigned tasks. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor or journeyman/1st Class electrician. Accountable for completion of daily work assignments. Must comply with OSHA standards and the shipyards best safety practices. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) Keep your work area clean and safe at all times, especially at the end of the shift. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor. Work shifts and overtime as assigned. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. Carry out instructions furnished in written, oral, or diagram form. Confer with the Journeyman/1st Class electrician to resolve unexpected events related to your assigned task. Work Tasks Include: 1. Running cables, lines and leads, terminations/connector fabrication, packing of cable transits and harnessing cables aboard vessels., 2. Prepares work area, drills holes, grinds metal surfaces, inspect and reports on cableway and electrical equipment conditions., 3. Under direct supervision test internal circuits of major units of electrical equipment for continuity, short circuits, and grounds and measure electrical quantities and compare with established values., 4. Inspect mechanical and electrical connections including mounting bolts and screws; draw out disconnect devices and control wiring., 5. Detect and locate grounds, open circuits and short circuits in distribution generators and stems. Assist with the repair and maintenance of telephones, circuits, and associated equipment., 6. Assist with the installation of new power and lighting circuits., 7. Must be familiar with all safety procedures pertaining to electrical procedures or ask for safety information before working on electrical equipment., 8. Assist with Lock-out Tag-out for work being performed. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office condition to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. (x1) 1st Shift Needed (x2) 2nd Shift Needed Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies.We guarantee 15-25 hours per week with an hourly pay of between $25 / hr.There is no payment required in order to apply or to work as an In-Home Usage Tester.You

We're currently looking for individuals across the country to take part in remote paid market research, including online focus groups, product trials, and consumer studies.Earn up to $750 a week in your free time by providing feedback on everyday products and services.If you're comfortable sharing y

We’re looking for enthusiastic, self-driven, individuals to assist existing and prospective clients within our organization.This position will work with multiple clients throughout the day providing outstanding service and product knowledge.Distributes all benefit enrollment materials and