Medical tester jobs in Atlanta, GeorgiaCreate job alerts

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Diesel Technician to support our Truck Fleet in Atlanta, GA Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Three (3) years or more relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 11 hours ago (12/4/2025 8:45 AM) Requisition ID 2025-192175 Location (Posting Location) : State/Province GA Location (Posting Location) : City Atlanta Location (Posting Location) : Postal Code 30312 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001311

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Master Level Mobile Diesel Technician to support our Truck Fleet in Atlanta, GA Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Four (4) years or more Relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Four (4) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Decision making: Responsible for making decisions surrounding vehicle diagnostics and repair, • Performs vehicle maintenance and repair duties including: standard vehicle maintenance, preventive maintenance, complex repairs with minimal (if any) support, • Demonstrate the ability to access and use internal and external maintenance documents - Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable, • Performs remote triage to with RCRC and customers to determine best solution to assist roadside breakdowns, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task, • Instructs and advises other technicians regarding maintenance repair procedures and diagnostics, • Interact with non-contractual customers, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements. Posted Date 3 hours ago (12/5/2025 4:40 PM) Requisition ID 2025-192504 Location (Posting Location) : State/Province GA Location (Posting Location) : City Atlanta Location (Posting Location) : Postal Code 30312 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001374

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Master Level Mobile Diesel Technician to support our Truck Fleet in Atlanta, GA Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Four (4) years or more Relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Four (4) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Decision making: Responsible for making decisions surrounding vehicle diagnostics and repair, • Performs vehicle maintenance and repair duties including: standard vehicle maintenance, preventive maintenance, complex repairs with minimal (if any) support, • Demonstrate the ability to access and use internal and external maintenance documents - Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable, • Performs remote triage to with RCRC and customers to determine best solution to assist roadside breakdowns, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task, • Instructs and advises other technicians regarding maintenance repair procedures and diagnostics, • Interact with non-contractual customers, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements. Posted Date 11 hours ago (12/4/2025 8:46 AM) Requisition ID 2025-192181 Location (Posting Location) : State/Province GA Location (Posting Location) : City Atlanta Location (Posting Location) : Postal Code 30312 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001374

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mid-Level Mobile Diesel Technician to support our Truck Fleet in Atlanta, GA Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Two (2) years or more of a combination of classroom training and work experience in required experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • One (1) year or more federal PM certification requirements through any combination of classroom training or work experience totaling 1 year, • One (1) year or more mechanical experience working offsite at customer locations preferred, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practicesEntrepreneurial spirit, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • Battery Charge and Check, Warranty, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • OEM on-line engine courses (minimum 2), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with non-contractual Ryder customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss any repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform basic system checks such as power to compressor, visual inspection of condenser, belt tension, etc.; Identify Freon and oil leaks., • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified., • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes., • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions., • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check., • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation., • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems., • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables., • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights., • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers., • Driveline: Lubricate drive line; Inspect components for wear or damage., • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks., • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc... for proper integrity and condition., • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal., • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc., • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism., • Utilize key functions of Shop Management System and electronic documentation available. - Perform work in accordance with all federal/ provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 11 hours ago (12/4/2025 8:46 AM) Requisition ID 2025-192169 Location (Posting Location) : State/Province GA Location (Posting Location) : City Atlanta Location (Posting Location) : Postal Code 30312 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001312

Job ID: 517621 CRH's Americas Materials division is the leading integrated supplier of aggregates, asphalt, ready mixed concrete and paving and construction services in North America. Our operations span North America with over 29,000 employees at close to 1,660 locations in 45 US States and 2 Canadian provinces. Position Overview CRH Americas Materials currently has ~15 different ERP systems (from two separate software vendors - SAP and Viewpoint) and is on a transformational journey to move to a single ERP environment with standardized business processes across the company. This will be a multi-year program with complex change management and implementation plans. The Sr. IT Project Manager is a key role in this transformation and will manage multiple workstreams integrated plan, timeline, resource allocation, and cross-workstream interdependcies to ensure timely and on-budget completion of the program. Key Responsibilities (Essential Duties and Functions) To perform this job successfully, an individual must be able to perform each essential duty satisfactorily for multiple workstreams • Plan, schedule and track project timelines, resources, milestones and deliverables using program/project management tools and best practices., • Define project scope, goals and deliverables that support business goals in collaboration with senior management and stakeholders., • Develop and manage full-scale project plans and associated communications documents for all assigned projects., • Set, communicate and continually manage project expectations with team members and other stakeholders in a timely, clear and concise manner., • Conduct project closing and create lessons learned documentation identifying successful and unsuccessful project elements., • Identify and manage project dependencies and critical path issues/risks., • Proactively manage changes in project scope, schedule, resources and budget., • Identify any issues/risks to program/project success and develop mitigation plans to manage them throughout the project life cycle., • Coordinate the efforts of all project team members and contractors, influencing them to take positive action and accountability for their assigned work., • Coordinate with IT Product Management to ensure that all program/project deliverables align with and support the strategic business goals of the applicable products., • Build, develop, and grow business relationships vital to the success of the program and any related projects., • Other duties as assigned by management. Qualifications Education/Experience • 10+ years of experience working on IT projects, • 5+ years working on SAP implementations in various roles (such as Project Manager, Functional Analyst, Technical Developer, or Tester, etc.), • 3+ years of managing and leading SAP ERP implementations, • Bachelor’s Degree in Management Information Systems, Computer Science or equivalent technical Degree, • Experience working in complex, distributed business preferred, • Project Management Professional (PMP) preferred, • CSM – Certified Scrum Master preferred Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Willingness and ability to travel up to 50% (average 25% but will be higher during key project milestones such as User Acceptance Testing, Go-Live), • Overtime as required to meet project deadlines., • Sitting for extended periods of time., • Hybrid work schedule and ability to come to the office at least 3 times a week, but could be higher during peak periods. Work Environment • Office work environment including equipment such as computer, and projector The statements included in this job description are not intended to be all-inclusive. They represent typical elements and criteria necessary to successfully perform the job. Other duties may be assigned as required. Requirements for this job are subject to modification by the Company and its designees, and reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. What CRH Offers You • Highly competitive base pay, • Comprehensive medical, dental and disability benefits programs, • Group retirement savings program, • Health and wellness programs, • An inclusive culture that values opportunity for growth, development, and internal promotion About CRH CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization. If you’re up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest! CRH Americas Materials Inc. is an Affirmative Action and Equal Opportunity Employer. EOE/Vet/Disability CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law.

Job Description Salary: $49,000 Residency Requirement: Primary residence must be in the state of Georgia Job Summary The Community Registered Dietitian Nutritionist will support the comprehensive nutrition care mission of Open Hand Atlanta providing a broad range of nutrition and health related consultations, educational sessions and training, as well as developing programs and educational tools to convey messages to the agency’s clients, partners, and employees. Supervisory Responsibilities None Duties/ Responsibilities • Provide individualized medical nutrition therapy in clinic, worksite, telenutrition, and home settings to include HIV/AIDS, diabetes/pre-diabetes, hypertension, weight management, kidney disease, and GI conditions, as well as nutrition across the lifecycle with a strong emphasis in senior nutrition., • Research and develop educational tools for print and electronic medium to support and reinforce client nutrition-related lifestyle and behavior changes., • Present evidenced-based curriculums and education to clients in a group setting and in the community including Diabetes Self-Management and Chronic Disease Self-Management., • Support grant-funded projects aimed at optimal nutrition and positive health behavior change. Manage outcome data for these projects., • Monitor selected nutrition, health and wellness programs to ensure optimal client reach and that nutrition benchmarks are established and achieved., • Provide telenutrition, telephone, and email support to engage clients in health-promoting behaviors., • Participate in health events across the city of Atlanta, as needed., • Provide oversight and feedback to dietetic interns throughout their rotation., • Stay abreast of current research in community nutrition, HIV/AIDS, senior nutrition, as well as chronic disease management., • Ability to perform job with accuracy and attention to detail., • Ability to interact with others in a consistently pleasant manner., • Ability to meet tight deadlines with little or no supervision., • Ability to enter data into a relational database, utilize Microsoft Office Suite applications., • Ability to deal with people in multiple organizations at various organizational levels, ages, ethnicities and backgrounds., • Comfortable speaking in small and large groups., • Ability to coordinate various activities and assign tasks., • Excellent verbal and written communications., • Experience in organization and assessment of priorities is a must, as well as able to multi-task., • B.S. Degree in Dietetics or related field of study from an ACEND accredited program. MS or MPH preferred., • Credentialing as a Registered Dietitian by the Commission on Dietetic Registration (CDR) and Licensed Dietitian, State of Georgia. Or RD-eligible taking the exam within 1 month of start date., • Minimum of one (1) to two (2) years of professional experience in dietetics. Experience in educational tool development, health promotion, and disease management and prevention., • Proficiency using Microsoft Office including Excel and Word. Creativity using Canva and excellent writing and public speaking skills., • Local travel required to teach classes across metro Atlanta. Travel may be required for conferences and trainings., • Working vehicle, vehicle insurance, and valid driver’s license., • The employee is regularly required to sit at a computer, answer the telephone and perform other office duties. Open Hand is a drug free and substance abuse free work environment. All candidates hired are subject to a pre-employment drug screen. Random drug testing may be conducted by an external, neutral tester on all employees. Any perceived use of drugs or reporting to work under the influence of alcohol may be grounds for immediate dismissal. Equal Opportunity Open Hand is an equal employment opportunity employer. Employment decisions are based on merit and business needs, and not on race, color, citizenship status, national origin, ancestry, gender, sexual orientation, age, religion, creed, physical or mental disability, marital status, veteran status, political affiliation, or any other factor protected by law. Open Hand complies with the law regarding reasonable accommodations for handicapped and disabled employees.

Job Description Job description As our Audiology department continues to grow, we are looking to add Audiology Assistants to support our providers and patients in our Atlanta, GA area offices. As an Audiology Assistant, you will be an integral part of the patient experience by ensuring that schedules are updated, hearing aid orders are tracked, and patient concerns are addressed in a timely manner. We currently have an opening in our Sandy Springs and Alpharetta locations. Primary Objective The Audiology Assistant provides clinical and administrative support to the Audiologist to collaboratively ensure the delivery of high quality, compassionate care to PENTA’s patients. Essential Functions • Collect, enter and verify patient demographic and insurance information in the electronic health records (EHR) system., • Schedule/reschedule/cancel patient appointments in the EHR system., • Maintain applicable work queues in the EHR system., • Manage hearing aid orders, device repairs and manufacturer returns., • Interact with hearing aid instrument manufacturer/suppliers regarding the status of orders/repairs., • Maintain stock of office and clinical supplies., • Assist with form completion, including purchase agreements, returns and repairs., • Perform checks, troubleshooting and minor repairs to hearing aids, earmolds and other amplification devices under the direction of the Audiologist., • Clean hearing aids and other amplification devices., • Assist Audiologist with two-tester audiograms., • Assist with equipment maintenance and biological checks., • Ability to meet the physical and mental demands of the position, • The ability to work on-site, • Predictable, reliable, and prompt attendance Skills and Abilities • Ability to utilize an Electronic Medical Record system (Epic preferred)., • Ability to use Microsoft Word and Teams., • Ability to communicate professionally (written and verbal)., • Ability to answer emails and voicemails in a timely manner. Core Competencies • Customer Service, • Continuous Learning, • Patient Focus, • Communication, • Energy, • Attention to Detail Training Period Training period would vary depending on past Audiology experience and proficiency with required responsibilities. Training will be completed on basic Audiology procedures, EMR, Noah, different hearing aid manufactures, work queues efficiencies. Training period would be two to three months. Education • High school diploma or equivalent GED required., • Associate’s or bachelor’s degree preferred. Experience • Experience in Audiology, hearing science or Speech Language Pathology preferred., • Experience in a medical office setting preferred. Work Environment The work environment characteristics described are representative of those an employee may encounter while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Supervision The Audiology Assistant reports to the Director of Audiology with clinical oversight from clinical location Audiologist(s). This position has no supervisory responsibilities. Position Type and Expected Hours of Work Full-time position, 40 hours a week, Monday-Friday 8am – 5pm. Hours are subject to variation based upon clinic needs. Physical and Mental Requirements The physical and mental demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Demands: • Frequently required to stand; walk; sit in front of a computer; type; perform repetitive mouse clicks; use hands to finger, handle or feel; and reach with hands and arms to assist patients and/or providers/staff., • Occasionally assist with moving or positioning patients in wheelchairs, clinical equipment and office supplies up to 300 pounds. Mental Demands: • Ability to learn new skills and concepts., • Ability to multi-task., • Ability to work under pressure., • Ability to make quick decisions., • Ability to thrive in fast-past environment., • Ability to use discretion and sensitivity. Travel Travel to various PENTA locations is required dependent upon business need. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. In addition to those essential functions identified above, individuals in this position are also responsible for performing other duties or tasks that may be assigned. PENTA retains the discretion to add or change the essential job functions of this position at any time without notice. A Typical Day in the Position A typical day for the Audiology Assistant will vary depending on the clinical location and daily needs. The Audiology Assistant will need to efficiently prioritize daily tasks while under the direction of the clinic’s Audiologist(s). The Audiology Assistant will complete the different responsibilities under the “essential functions”.