Trabajos meter technician en Irving, TexasCrear alertas

Job Description Maintenance Technician is responsible for safely maintaining, repairing, replacing, and modifying all processing, packaging and facility equipment with optimal quality and efficiency. Mechanic C is responsible for maintaining the operational readiness of the FR system using various systems and multiple technical strategies and similar control technology. Responsible for record keeping of chemical use, on site chemical inventories, assisting with bulk chemical deliveries and rinsing of chemical containers when emptied. Actively participates in the development and delivery of various training plans to ensure proper execution of system requirements. Performs a variety of technical troubleshooting and repair activities to ensure proper functioning of technical equipment and system reliability for FR equipment, Industrial Waste (IW) controls and related ancillary systems. Responsible for the neutralization system for chemical mixing room and ensuring correct pH levels are achieved before discharge to the IW system. Job Function Statements - Essential Functions: • Ability to operate our CMMS system and demonstrate 100% functionality to complete work orders as well as log corrective maintenance issues in the system., • Ability to effectively communicate with Production and other mechanics to identify problematic areas of concern; provide and receive feedback and/or support through collection and analysis of information., • Maintain equipment and perform basic mechanical tasks to keep equipment in optimal operating condition; ability to repair 40% of equipment without direction., • Perform some electrical repairs including AC & DC motor controls, solid state motor controls, advance circuits, and grounding diagrams; ability to test equipment within skill range., • Ability to read and understand schematics, drawings, and manuals to establish facts and draw a valid conclusion., • Ability to demonstrate mechanical, electrical, hydraulic, and pneumatic troubleshooting skills., • Must demonstrate an understanding of the company's objectives including productivity, yields, food safety, quality, customer service and cost goals; daily work activities should support achieving those goals., • Ability to demonstrate computer and math skills as part of daily activities such as fractions, decimals, percentages and the metric system, efficient with metric system, ratios, and formulas., • Perform daily inspections, emergency repairs, routine adjustments, and follow periodic preventive maintenance schedule., • Model professional workplace conduct and adherence to company policies such as the Code of Conduct, attendance, punctuality, efficient and productive work habits, and good personal hygiene., • Perform other duties as required or assigned., • Performs chemical mixes for batch creation as needed, • Performs process and mix batch testing as needed, • Maintains the validation and operation of the FR system and its components including but not limited to load cells, probes and chemical dosing pumps. Required Qualifications/Skills: • Must work effectively in a team setting., • Must demonstrate a basic ability to cross-train other mechanics as well as production personnel., • Knowledge of Microsoft computer programs, Outlook, Word, Excel. (Ability to enter data into the system)., • Ability to use Computerized Maintenance Management System to track orders, PM's and inventory., • Achieve a passing score on the Ramsay exam., • Use a multi-meter and other measurement instruments., • Troubleshoot PLC controls, such as Allen-Bradley, GE Fanuc., • Work with computer programs, such as Word and Excel., • Demonstrate proficient fabrication and welding systems., • Demonstrate welding skills., • 1-3 years' experience with industrial equipment {or 1 years of technical training}, preferably in a food processing facility., • Familiar with preventive or reliability-based maintenance. The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed, as an exhaustive list of responsibilities, duties and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer. Job Posted by ApplicantPro

Job Description Stones River Electric is actively seeking a motivated and experienced service electrician to assist in our National operations. Responsibilities include: • Ability / knowledge to operate and maintain a bucket truck, • Ability to Travel throughout the state, • Troubleshooting; Perform service, repair, and maintenance of electrical systems in commercial facilities (retail, office, industrial, hospitality, etc.), • Performing skilled electrical field operations, with the support of office coordination., • Minimum of 5 years of Bucket Truck / Equipment Hauling experience, • Must be computer literate, • Must be a self-starter, • Must have excellent communication skills, • Valid driver’s license, • Successful completion of drug screening, background check, and motor vehicle check, • Hand Tools – Provided by Technician (including but not limited to), • Voltage Tester / Meter, • Linesman Pliers, • Wire Strippers, • Diagonal Cutters, • Company Vehicle, Gas Card & Credit Card, • Equipment, • Phone Reimbursement, • Storage Unit to Store Company Materials Compensation: • Medical, dental & vision, • Paid Holidays, • Vacation, • 401K Match, • Sign-on/Referral Bonus after 90 Days Qualified candidates please apply today and submit your resume or work history. We are an equal opportunity employer. APPLY TODAY. Company Description Stones River Electric stands as a distinguished family-owned and privately held company with a rich legacy spanning over 30 years. Our expertise lies in leading-edge services encompassing the design, installation, management, and maintenance of facility lighting, electrical, and energy solutions. Recognized for our unwavering dedication to enhancing energy efficiency and delivering cost-effective solutions, we have established a stellar reputation for innovation and excellence in the industry. As a dynamic and growing organization, we prioritize top-tier expertise, professionalism, and exceeding customer expectations. Join our team and be a part of our enduring legacy of success in the electrical industry! Company DescriptionStones River Electric stands as a distinguished family-owned and privately held company with a rich legacy spanning over 30 years. Our expertise lies in leading-edge services encompassing the design, installation, management, and maintenance of facility lighting, electrical, and energy solutions. Recognized for our unwavering dedication to enhancing energy efficiency and delivering cost-effective solutions, we have established a stellar reputation for innovation and excellence in the industry. As a dynamic and growing organization, we prioritize top-tier expertise, professionalism, and exceeding customer expectations. Join our team and be a part of our enduring legacy of success in the electrical industry!Stones River Electric stands as a distinguished family-owned and privately held company with a rich legacy spanning over 30 years. Our expertise lies in leading-edge services encompassing the design, installation, management, and maintenance of facility lighting, electrical, and energy solutions. Recognized for our unwavering dedication to enhancing energy efficiency and delivering cost-effective solutions, we have established a stellar reputation for innovation and excellence in the industry. As a dynamic and growing organization, we prioritize top-tier expertise, professionalism, and exceeding customer expectations. Join our team and be a part of our enduring legacy of success in the electrical industry!

Job Description The Technology Specialist I, installs, repairs, upgrades, calibrates, and troubleshoots current and future technology products. In addition, this position trains customers on all levels of survey infrastructure products and machine technology. Essential Functions: • Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission, • Demonstrates technology products and recommends the best technology solutions for each customer application, • Installs laser, Global Positioning System (GPS), and Universal Total Station (UTS) systems on all makes and models of heavy equipment and sets up correctional GPS sources, i.e., Base Stations, Internet Base Station Service (IBSS) or Virtual Reference Station (VRS), • Teaches customers and employees on effective utilization of the technology products to optimize productivity and monitor machine health to include, but not limited to; Laser systems, GPS systems, UTS system, Infrastructure, Survey Products, Site Calibrations, File Management, VisionLink, and Winflash, • Coordinates with manager to develop product database that will assist in troubleshooting and works with other departments to ensure customer needs are met, • Creates and initiates machine communications with back office for downloading/uploading of models and uploading of surface data information, • Troubleshoots electrical systems, CAN and Ethernet networks, and hydraulic systems, documenting the process to increase understanding and efficiencies, • Performs system testing with sample/live data and technology, • Maintains and improves current technology, • Verifies site calibrations using proper survey techniques and trouble-shoot using the same. If the site calibration is bad, can use rovers, robotic total stations, auto levels, and can run a level loop if necessary, to identify the problem, • Works with various programs to include, but not limited to, MAS, SiSweb, ET, Business Center, Trimble Connected Community, Veda, and Trimble Store, • Install, measure up, calibrate Earthworks platforms on all models and machine brands of supported machines with use of robotic total stations and survey products, • Performs application calibrations, troubleshooting, root cause analysis, and problem resolution, • Service Technician tests, diagnoses, repairs, and adjusts electronic and optical equipment to ensure that they are in the optimal working order. This position is a multidisciplinary role requiring operational understanding, and underlying methodologies for heavy civil site construction., • Utilizes Business Center software to update customer files, check for modeling errors and verify data, • Works with other departments to ensure that customer’s needs are met, • Trains customers on CAT integrated technology products, • Pulls and prepares inventory to complete tasks, • Covers periodic rotations on the “SITECH Help Desk” where the technician must be able to help customers troubleshoot machine and off machine issues over the phone using their extensive technology knowledge. Must work through customer issues while mental visualizing what the customer is doing and explaining. Must maintaining patients and professionalism to help solve the customer issues. This is a customer service role., • Requires regular and punctual employee attendance, • Works safely always and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Performs other duties as assigned Knowledge, Skills, and Abilities: • Knowledge with current computer software, related hardware, and machine electronic systems, • Strong electric diagnostic skills, schematic reading, and understanding, • Working knowledge 3D site modeling and the interaction of models with machine controls and site calibrations, • Ability to operate multiple sized and brands of heavy equipment to include motor graders, dozers, loaders, skid steers, asphalt trimmers, rock mills, piling machines, paving systems to include but not limited to asphalt pavers, concrete pavers and curbing machines., • Ability to install and repair hydraulic valve systems and associated control systems, • Strong electrical system experience. Ability to read and understand electrical system schematics, troubleshoot the same with a multi meter and sound troubleshooting techniques. Ability to troubleshoot CAN network systems. Also, able to build and pin out cables to make cables or to correct wiring issues., • Ability to disassemble and repair various electronic systems related to machine technology and survey infrastructure products. Must be able to read and understand wiring diagrams, • Ability to cut, grind, weld, and solder, • Excellent work habits, accuracy, attention to detail, and quality of work, • Excellent customer service skills, • Verbal and written communication skills, • Ability to follow logical troubleshooting procedures, • Effective influencing skills which include teaching, motivating, and developing customers and employees, • Strong organization and time management skills, • Critical thinking and problem-solving skills, • Ability to work independently and as part of a team, • Ability to be self-starting and self-motivated, • Ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects, • Ability to read, write, and understand information, • Ability to listen to and understand information and ideas presented through spoken words and sentences, • Strong computer skills and the ability to work in Microsoft Word, Excel, CAD, AGTEC, in addition to various warehouse and accounting programs Education and Experience: • High school diploma or equivalent and some college, or additional technical training, required; Associates Degree in Survey, Auto, or Diesel Mechanics preferred, • Trimble Certified Trainer preferred None Travel: • Up to 30% travel may be required, to include overnight stays, • Significant amount of time standing, walking, kneeling, crouching, stooping, and reaching, • Constant movement and use of hands, this position requires good manual dexterity, • Frequently communicates with others, must be able to exchange accurate information in these situations, • Routinely reacts to visual, auditory, and other signals including alarms and instructions, and is required to visually inspect work, • Must be able to move objects, and use abdominal and lower back muscles to provide support over time without fatigue, • Be able to maneuver safely and work underneath equipment, • Occasionally lifts and moves materials and equipment up to 50 lbs., • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipment Work Environment: • Regularly works outdoors around moving mechanical parts and may be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and humidity, • Requires wearing common protective or safety equipment, • Works in an enclosed and open vehicle or equipment, • Exposure to small quantities of chemicals, dust, steam, high-pressure water, and high-speed rotating equipment, • Works in extremely bright or inadequate lighting, • Exposure to high noise levels and body vibration, • Works in confined workspaces, awkward positions, and high places, • Exposure to minor burns, cuts, bites, or stings Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #LI-SIT

Job Description The Technology Specialist I, installs, repairs, upgrades, calibrates, and troubleshoots current and future technology products. In addition, this position trains customers on all levels of survey infrastructure products and machine technology. The incumbent in this position is expected to model the following practices daily: 1) Demonstrate alignment with the company's mission and core business values; 2) Collaborate with key internal/external resources; 3) Participate in ongoing self-development. Essential Functions: • Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission, • Demonstrates technology products and recommends the best technology solutions for each customer application, • Installs laser, Global Positioning System (GPS), and Universal Total Station (UTS) systems on all makes and models of heavy equipment and sets up correctional GPS sources, i.e., Base Stations, Internet Base Station Service (IBSS) or Virtual Reference Station (VRS), • Teaches customers and employees on effective utilization of the technology products to optimize productivity and monitor machine health to include, but not limited to; Laser systems, GPS systems, UTS system, Infrastructure, Survey Products, Site Calibrations, File Management, VisionLink, and Winflash, • Coordinates with manager to develop product database that will assist in troubleshooting and works with other departments to ensure customer needs are met, • Creates and initiates machine communications with back office for downloading/uploading of models and uploading of surface data information, • Troubleshoots electrical systems, CAN and Ethernet networks, and hydraulic systems, documenting the process to increase understanding and efficiencies, • Performs system testing with sample/live data and technology, • Maintains and improves current technology, • Verifies site calibrations using proper survey techniques and trouble-shoot using the same. If the site calibration is bad, can use rovers, robotic total stations, auto levels, and can run a level loop if necessary, to identify the problem, • Works with various programs to include, but not limited to, MAS, SiSweb, ET, Business Center, Trimble Connected Community, Veda, and Trimble Store, • Install, measure up, calibrate Earthworks platforms on all models and machine brands of supported machines with use of robotic total stations and survey products, • Performs application calibrations, troubleshooting, root cause analysis, and problem resolution, • Service Technician tests, diagnoses, repairs, and adjusts electronic and optical equipment to ensure that they are in the optimal working order. This position is a multidisciplinary role requiring operational understanding, and underlying methodologies for heavy civil site construction., • Utilizes Business Center software to update customer files, check for modeling errors and verify data, • Works with other departments to ensure that customer’s needs are met, • Trains customers on CAT integrated technology products, • Pulls and prepares inventory to complete tasks, • Covers periodic rotations on the “SITECH Help Desk” where the technician must be able to help customers troubleshoot machine and off machine issues over the phone using their extensive technology knowledge. Must work through customer issues while mental visualizing what the customer is doing and explaining. Must maintaining patients and professionalism to help solve the customer issues. This is a customer service role., • Requires regular and punctual employee attendance, • Works safely always and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Performs other duties as assigned Knowledge, Skills, and Abilities: • Knowledge with current computer software, related hardware, and machine electronic systems, • Strong electric diagnostic skills, schematic reading, and understanding, • Working knowledge 3D site modeling and the interaction of models with machine controls and site calibrations, • Ability to operate multiple sized and brands of heavy equipment to include motor graders, dozers, loaders, skid steers, asphalt trimmers, rock mills, piling machines, paving systems to include but not limited to asphalt pavers, concrete pavers and curbing machines., • Ability to install and repair hydraulic valve systems and associated control systems, • Strong electrical system experience. Ability to read and understand electrical system schematics, troubleshoot the same with a multi meter and sound troubleshooting techniques. Ability to troubleshoot CAN network systems. Also, able to build and pin out cables to make cables or to correct wiring issues., • Ability to disassemble and repair various electronic systems related to machine technology and survey infrastructure products. Must be able to read and understand wiring diagrams, • Ability to cut, grind, weld, and solder, • Excellent work habits, accuracy, attention to detail, and quality of work, • Excellent customer service skills, • Verbal and written communication skills, • Ability to follow logical troubleshooting procedures, • Effective influencing skills which include teaching, motivating, and developing customers and employees, • Strong organization and time management skills, • Critical thinking and problem-solving skills, • Ability to work independently and as part of a team, • Ability to be self-starting and self-motivated, • Ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects, • Ability to read, write, and understand information, • Ability to listen to and understand information and ideas presented through spoken words and sentences, • High school diploma or equivalent and some college, or additional technical training, required; Associates Degree in Survey, Auto, or Diesel Mechanics preferred, • Trimble Certified Trainer preferred, • Up to 30% travel may be required, to include overnight stays, • Significant amount of time standing, walking, kneeling, crouching, stooping, and reaching, • Constant movement and use of hands, this position requires good manual dexterity, • Frequently communicates with others, must be able to exchange accurate information in these situations, • Routinely reacts to visual, auditory, and other signals including alarms and instructions, and is required to visually inspect work, • Must be able to move objects, and use abdominal and lower back muscles to provide support over time without fatigue, • Be able to maneuver safely and work underneath equipment, • Occasionally lifts and moves materials and equipment up to 50 lbs., • Regularly works outdoors around moving mechanical parts and may be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and humidity, • Requires wearing common protective or safety equipment, • Works in an enclosed and open vehicle or equipment, • Exposure to small quantities of chemicals, dust, steam, high-pressure water, and high-speed rotating equipment, • Works in extremely bright or inadequate lighting, • Exposure to high noise levels and body vibration, • Works in confined workspaces, awkward positions, and high places, • Exposure to minor burns, cuts, bites, or stings Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #LI-SIT

Job Description The Technology Specialist I, installs, repairs, upgrades, calibrates, and troubleshoots current and future technology products. In addition, this position trains customers on all levels of survey infrastructure products and machine technology. Essential Functions: · Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission · Demonstrates technology products and recommends the best technology solutions for each customer application · Installs laser, Global Positioning System (GPS), and Universal Total Station (UTS) systems on all makes and models of heavy equipment and sets up correctional GPS sources, i.e., Base Stations, Internet Base Station Service (IBSS) or Virtual Reference Station (VRS) · Teaches customers and employees on effective utilization of the technology products to optimize productivity and monitor machine health to include, but not limited to; Laser systems, GPS systems, UTS system, Infrastructure, Survey Products, Site Calibrations, File Management, VisionLink, and Winflash · Coordinates with manager to develop product database that will assist in troubleshooting and works with other departments to ensure customer needs are met · Creates and initiates machine communications with back office for downloading/uploading of models and uploading of surface data information · Troubleshoots electrical systems, CAN and Ethernet networks, and hydraulic systems, documenting the process to increase understanding and efficiencies · Performs system testing with sample/live data and technology · Maintains and improves current technology · Verifies site calibrations using proper survey techniques and trouble-shoot using the same. If the site calibration is bad, can use rovers, robotic total stations, auto levels, and can run a level loop if necessary, to identify the problem · Works with various programs to include, but not limited to, MAS, SiSweb, ET, Business Center, Trimble Connected Community, Veda, and Trimble Store · Install, measure up, calibrate Earthworks platforms on all models and machine brands of supported machines with use of robotic total stations and survey products · Performs application calibrations, troubleshooting, root cause analysis, and problem resolution · Service Technician tests, diagnoses, repairs, and adjusts electronic and optical equipment to ensure that they are in the optimal working order. This position is a multidisciplinary role requiring operational understanding, and underlying methodologies for heavy civil site construction. · Utilizes Business Center software to update customer files, check for modeling errors and verify data · Works with other departments to ensure that customer’s needs are met · Trains customers on CAT integrated technology products · Pulls and prepares inventory to complete tasks · Covers periodic rotations on the “SITECH Help Desk” where the technician must be able to help customers troubleshoot machine and off machine issues over the phone using their extensive technology knowledge. Must work through customer issues while mental visualizing what the customer is doing and explaining. Must maintaining patients and professionalism to help solve the customer issues. This is a customer service role. · Requires regular and punctual employee attendance · Works safely always and adheres to all applicable safety policies; complies with all company policies, procedures, and standards · Performs other duties as assigned Knowledge, Skills, and Abilities: · Knowledge with current computer software, related hardware, and machine electronic systems · Strong electric diagnostic skills, schematic reading, and understanding · Working knowledge 3D site modeling and the interaction of models with machine controls and site calibrations · Ability to operate multiple sized and brands of heavy equipment to include motor graders, dozers, loaders, skid steers, asphalt trimmers, rock mills, piling machines, paving systems to include but not limited to asphalt pavers, concrete pavers and curbing machines. · Ability to install and repair hydraulic valve systems and associated control systems · Strong electrical system experience. Ability to read and understand electrical system schematics, troubleshoot the same with a multi meter and sound troubleshooting techniques. Ability to troubleshoot CAN network systems. Also, able to build and pin out cables to make cables or to correct wiring issues. · Ability to disassemble and repair various electronic systems related to machine technology and survey infrastructure products. Must be able to read and understand wiring diagrams · Ability to cut, grind, weld, and solder · Excellent work habits, accuracy, attention to detail, and quality of work · Excellent customer service skills · Verbal and written communication skills · Ability to follow logical troubleshooting procedures · Effective influencing skills which include teaching, motivating, and developing customers and employees · Strong organization and time management skills · Critical thinking and problem-solving skills · Ability to work independently and as part of a team · Ability to be self-starting and self-motivated · Ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects · Ability to read, write, and understand information · Ability to listen to and understand information and ideas presented through spoken words and sentences · Strong computer skills and the ability to work in Microsoft Word, Excel, CAD, AGTEC, in addition to various warehouse and accounting programs Education and Experience: · High school diploma or equivalent and some college, or additional technical training, required; Associates Degree in Survey, Auto, or Diesel Mechanics preferred · Trimble Certified Trainer preferred · Up to 2 years experience with machine control products and infrastructure preferred Supervisory Responsibilities: None Travel: · Up to 30% travel may be required, to include overnight stays · Valid Driver’s License required Physical Requirements: · Significant amount of time standing, walking, kneeling, crouching, stooping, and reaching · Constant movement and use of hands, this position requires good manual dexterity · Frequently communicates with others, must be able to exchange accurate information in these situations · Routinely reacts to visual, auditory, and other signals including alarms and instructions, and is required to visually inspect work · Must be able to move objects, and use abdominal and lower back muscles to provide support over time without fatigue · Be able to maneuver safely and work underneath equipment · Occasionally lifts and moves materials and equipment up to 50 lbs. · Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipment Work Environment: · Regularly works outdoors around moving mechanical parts and may be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and humidity · Requires wearing common protective or safety equipment · Works in an enclosed and open vehicle or equipment · Exposure to small quantities of chemicals, dust, steam, high-pressure water, and high-speed rotating equipment · Works in extremely bright or inadequate lighting · Exposure to high noise levels and body vibration · Works in confined workspaces, awkward positions, and high places · Exposure to minor burns, cuts, bites, or stings Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #LI-SIT

Job Description Job Summary - NEW BUILD CONSTRUCTION The OSP Data Center Technician will be responsible for installing, testing, maintaining, and troubleshooting fiber optic and copper cabling systems within and outside data center environments. Candidates must have experience with OSP cabling practices, an understanding of structured cabling systems, and the ability to work safely in various field conditions. Candidates are encouraged to apply immediately as we have an urgent need throughout Dallas and DFW. Key Responsibilities • Install, terminate, splice, and test fiber optic and copper cabling for data center and OSP environments., • Interpret and work from blueprints, CAD drawings, and technical documents., • Perform fiber optic testing using OTDR, power meters, and other test equipment., • Conduct routine maintenance, troubleshooting, and repair of OSP infrastructure., • Install conduits, handholes, manholes, and aerial or underground cabling systems as needed., • Ensure compliance with all safety regulations, industry standards (TIA/EIA, BICSI), and company procedures., • Document all work using appropriate systems (e.g., GIS, asset management software). Required: • High school diploma or equivalent., • 2+ years of experience in OSP, fiber optics, or structured cabling., • Strong understanding of OSP infrastructure (aerial, underground, and in-building pathways)., • Familiarity with splicing, testing, and troubleshooting fiber optic cables., • BICSI certification (OSP Technician, Installer, or Technician Level II)., • FOA CFOT or equivalent fiber optic certifications., • OSHA 10/30, First Aid/CPR certification., • Pay up to $30.00 depending on experience, • Weekly Pay, • Referral Bonuses up to $250 for referrals that result in a placement (Ask for details)Company DescriptionOutsource is the Nation's leading provider of low voltage, electrical, and plumbing talent. We work EXCLUSIVELY in electrical, plumbing, and low-voltage, and have been placing candidates of all levels with the right companies since 1998 so we know a thing or two about making a good match. Outsource is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, gender, sexual orientation, gender identity or expression, religion, national origin, marital status, age, disability, veteran status, genetic information, or any other protected status.Outsource is the Nation's leading provider of low voltage, electrical, and plumbing talent. We work EXCLUSIVELY in electrical, plumbing, and low-voltage, and have been placing candidates of all levels with the right companies since 1998 so we know a thing or two about making a good match. \r\n\r\nOutsource is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, gender, sexual orientation, gender identity or expression, religion, national origin, marital status, age, disability, veteran status, genetic information, or any other protected status.

Job Description Location: Position requires travel so the candidate can be located anywhere within the US. Why CCI? CCI Systems, Inc. is an Employee-Owned solution provider specializing in telecommunications, comprehensive network assessments, industry-leading engineering, drafting and design services, and 24/7 support services. Come join our team of engineers and experts that guide our customers toward the right choices to future-proof their network for years to come. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We value our employees’ hard work and determination and REWARD results all while having fun! Our mission is to make life better by connecting people through innovative communication systems. We are seeking a Field Engineer to provide technical expertise pertaining to customer network upgrades, services, field management and project administration with a full understanding of HFC distribution systems. Responsibilities • Assess Outside Plant (OSP) and Inside Plant (ISP) hardware and infrastructure including but not limited to plant documentation, Hybrid Fiber Coax, (HFC) active and passives, reading and understanding OSP diagrams/drawings, taking and maintaining accurate field notes, operation of a bucket truck, accessing network enclosures and nodes and operation of testing gear., • Correct customer network failures and improve overall network performance using sweep gear and CATV test equipment., • Diagnose and repair plant related issues to reduce upstream noise and forward path impairments within the cable system with the use of standard OSP tools to include OTDR's, TDR’s, light meters, and signal strength meters., • Conduct targeted system sweeps, document findings, and deliver system information to create system reports., • Perform head end and meter set up., • Perform DOCSIS 3.1 testing and assessments., • Calculate system signal losses and make necessary adjustments to resolve issues., • Reduce and diagnose upstream noise within the cable system., • Install/align/optimize HFC equipment including fiber optic nodes and related equipment., • Install in-line devices on system backbone (node, amplifiers, line extenders, taps, splitters, and power supplies) as necessary for sweep and system upgrade projects., • Work with customers, subcontractors, and other team members in the field to define, collect, and determine information from customers and customer facilities for project requirements., • Implement and oversee a team of technically sound, customer-minded, and quality focused technicians and subcontractors tasked with delivery of best-in-the-world services to CCI Systems, Inc. customers., • Assign daily workload to in-house technical staffing and subcontract labor to enable TFS to fulfill contract obligations with customers., • Work with project managers to ensure daily field operations, staffing, quality control and deliverables are driving necessary profitability goals per project., • Approve weekly project documentation; this includes subcontractor production reporting, in-house employee production reporting, technical documentation, and other necessary documentation., • Meet with customers at local level to discuss any project related issues., • Understanding the project SOW and escalation process for deviations., • Report accurate daily project updates for productivity tracking and project billing., • Define, develop, and share technical knowledge and stay current on technical advancements., • Ensure the proper development and training of new employees to assigned project., • 5-7 years’ experience as a Coax Splicer., • 5-7 years’ experience in a HFC Sweep/Technician role within the Service Provider space., • Consulting background and experience working with multiple customers preferred., • Sweep certification preferred., • DOT Certification & Bucket Truck and Safety Certifications preferred., • Test equipment will include but not limited to the following: VIAVI SCU 1800 Sweep Generator, VIAVI OneExpert ONX-630, VIAVI DSP TDR, OTDR, VOM, and Light Meter., • Full understanding of Viavi/JDSU gear regarding sweep; includes head end and meter set up., • DOCSIS testing experience., • Full understanding of an HFC head end; combining, optics (forward and return), and basic understanding of CMTS, FTTX, and ISP., • In-Depth understanding of OSP (outside plant) and proficient in troubleshooting., • Test result evaluation and reporting., • Able to work independently on projects and take direction from teammates and develop skills to advance professionally., • Strong verbal and written communication skills., • Ability to take direction and work within timelines., • Demonstrates leadership skills to positively influence others, mentor, and collaborate with teammates, communicate on the level of others, listen, and understand people in circumstances common in the workplace. Additional information • Approximately 75% nationwide travel is required, typically 14 days on-site, travel days, and 5 days off at home., • Must have a valid driver’s license and a good driving record., • Must be able to pass a DOT Medical Examination to obtain and maintain a DOT Commercial Motor Vehicle Certification., • This is a remote position when not traveling. #LI-DNI

Job Description THIS POSITION MAY BE FILLED AS A REMOTE ROLE IN ANY OF OUR ACTIVE PROJECT MARKETS, BUT DOES REQUIRE EXTENSIVE TRAVEL ACROSS THE COUNTRY TO SUPPORT ACTIVE PROJECTS. THIS IS A WORKING MANAGER ROLE, REQUIRING THE INDIVIDUAL TO REGULARLY PERFORM SPLICING DUTIES AS WELL AS MANAGE TEAMS OF SPLICERS. WHO WE ARE EPC was conceived and operates to provide anyone who desires to provide for their families through the work they do, an opportunity to do so. Everything we do revolves around the vision of a company that provides safe, quality work, driving customer demand that ultimately results in the creation of new job opportunities in the markets we serve. We focus heavily on our Core Values and expect all our employees to operate with those Core Values in Mind. These Core Values are Live Safe, Customer First, Do the Right Thing, Be at Team Player, and Be Productive. WHAT WE’RE LOOKING FOR This position will be a working manager, meaning they’ll have split responsibilities of orchestrating the day-to-day activities of the field splice & test crews both inhouse and contracted resources as well as performing splicing functions and testing. This individual will be responsible for leading a team of fiber splicers (in-house and/or subcontractors) in completing all aspects of fiber splicing, including performing fiber splicing activities as a working manager. WHAT YOU GET TO DO • Utilize proper techniques to splice fiber, and to assign to members of the team., • Troubleshooting of fiber utilizing an OTDR and other appropriate equipment., • Responsible for maintaining acceptable performance standards and metrics of crews working on multiple projects., • Be able to lead large cuts and throws for customers, • Testing- understands both OTDR and Light Meter testing, able to put together test results as requested by customer, • Splicing- understands proper means and methods of setups for OSP and ISP installations, • Material- understand splicing needs and be able to stock material for splicers, • Maintain contract schedule. Night work as needed., • Responsible for all administrative functions necessary to document work including but not limited to ordering and tracking of supplies, billing, hours, safety documents, etc., • Ensure safety practices and procedures are followed at all times., • Perform other related work as assigned using available resources to achieve established goals., • Possess the ability to communicate with projects managers, peers, and customers to schedule work and communicate deliver dates to the team., • Develop splice packages, fiber layer records, and review/approve test results and as-built packages upon completion in the field., • Possess the ability to communicate with projects managers, peers, and customers to schedule work and communicate deliver dates to the team., • Track new and ongoing projects by maintaining numerous Project Trackers., • Attend utility, municipal and customer meetings to review and obtain permissions for newly proposed customer projects. Some of these meetings occur after hours and on weekends., • Operate a bucket truck and able to work aloft to access splice cases and lashing fiber cable. Install a lashing machine on the strand and lash small sections of fiber to secure to the supporting strand., • Shall possess knowledge of fiber optic filters and CDWM filter splicing and testing., • The technician must also be able to operate an EXFO OTDR and work with CNS or contracted resources to complete fiber testing for circuits on an as needed basis., • Individual must be willing to learn and attend continuing ed classes for OTDR and fiber splicing., • Supervisor must be able to operate a fusion splice machine (single and mass) for fiber optic cables. This work requires a steady hand and the ability to sit in a single location for extended periods of time., • Supervisor must be able to work on ladders both 28-foot extension and step up to 8-foot-high step ladders., • Must have a minimum of 5 years of verifiable field experience in splicing fiber optics and 5 years copper experience., • A thorough understanding of splicing and testing both fiber and copper plant, • Able to diagnose trouble in both fiber and copper plants, • Strong people skills, team building, solid leadership skills, • Willing to work nights/weekends as required (available 24/7), • Full-time, permanent opportunity in a fast-growth company!, • Opportunity to work autonomously. None of that micromanaging garbage. We hate that!, • Competitive pay, • Comprehensive benefits package (medical, dental, vision), • Retirement benefits with company match, • Company paid time-off, • Weekly paychecks!, • Outdoors environment which may require exposure to elements, including but not limited to wind, rain, heat, cold, snow, sleet, mud, etc., • May be required to stand, sit, bend, twist, and reach as part of the job., • Extended periods of standing on your feet may be required., • May be required to lift up to 80 pounds., • Must be able to pass a background check, drug screen, or other job-related pre-hire screenings related to the job., • Must be efficient at working around others but also working alone when required., • Must be able to travel up to 100% of the time to support active projects and builds across the country.

Job Description The Dahill Group is pleased to be assisting our client, a well-established and highly regarded Texas based E&P company in search of an exceptional Production Accounting Technician. Production Accounting Technician Position Overview: The Production Accounting Technician will play a critical role in ensuring the accuracy, completeness, and integrity of daily and monthly production data. This position supports the Operations, Accounting, and Regulatory teams by maintaining allocation systems, validating field data, and preparing state and partner production reports. The ideal candidate is detail-oriented, analytical, and comfortable working across multiple software platforms and departments. Key Responsibilities: Production Data Surveillance & Management • Perform daily surveillance within the field data gathering (FDG/FDC) system to identify, flag, and resolve discrepancies in data entry or allocation calculations., • Interface with field personnel, SCADA providers, and software vendors to ensure accurate, timely, and complete production data., • Update Field Data Capture (FDC) and accounting systems with new wells, recompletions, shut-ins, facility changes, and removed assets, including allocation setups and modifications., • Input well test data into the allocation system and update gas meter full-wellstream factors accordingly. Monthly Allocation & Reporting • Submit monthly allocated production volumes to Accounting, Operations and Engineering teams., • Review plant statements, purchaser/settlement statements, and compare measured volumes for accuracy and reconciliation., • Review monthly take-in-kind imbalance statements and route for approval. Regulatory Support • Provide production information and backup documentation for all regulatory filings., • File well test results with the Texas Railroad Commission (TXRRC)., • Prepare and file monthly production reports with the TXRRC., • Prepare and submit monthly gas allocation reports to gas gatherers as required. Data Maintenance & Communication • Maintain and routinely distribute well status lists and shut-in well lists., • Update accounting system files (Quorum) as wells are drilled, recompleted, or plugged., • Coordinate with internal teams to ensure production reporting deadlines are met. Required Qualifications: • 5–10 years of experience in production accounting, operations support, or related oil & gas role., • Working knowledge of production data systems, measurement practices, allocation processes, and FDC programs., • Familiarity with field operations terminology and facility configurations., • Strong Excel skills and familiarity with production accounting software., • Understanding of SCADA and well test data., • Ability to interpret plant statements, purchaser statements, and production volume reports., • Strong analytical skills with exceptional attention to detail., • Basic understanding of data structure and management. Preferred Qualifications: • Experience with Texas Railroad Commission (RRC) filings – critical., • Prior work with Haynesville assets or similar unconventional plays highly desired Core Competencies: • Accuracy & Attention to Detail, • Problem Solving & Critical Thinking, • Data Integrity & Quality Control, • Communication & Collaboration, • Time Management & Deadline Discipline, • Technical & Analytical Aptitude Work Environment: • Office based hybrid, remote or in corporate office, with regular field personnel communication., • Regular collaboration with engineers to investigate data concerns., • Occasional travel to field sites or operations meetings may be required. Compensation: *Base Salary: $85k-$115k – based on experience and background *Target Annual Target Cash Bonus Range: 5% - 10% - range based on experience and industry specific skills Additional Benefits Include: *100% Employer paid Health insurance for employee, spouse and children. *401K employer matches the first 1% at 100% and the next 6% at 50%. *Pension eligibility after completion of 1st year of employment ADDITIONAL NOTES ON LOCATION AND WORK SCHEDULE INCLUDE: **Required to work in the corporate office in Longview, Texas for those within 40 miles of Longview – ABILITY TO work remotely from Houston, Austin, or Dallas-Fort Worth, or Shreveport LA area with a 1 week per month requirement to work in the corporate office in Longview.

Job DescriptionSalary: Why Pref-Tech? Voted "Top Workplaces" by Houston Chronicle and Austin American Statesman, 2 years in a row! We aim to make family a core reason we attract incredible people, retain them, and collectively deliver unequaled quality and service to customers. If your heart and mind are pushing you to join a team who deeply desires to be the best in the world, has a long-game approach to business, prides itself on doing exceptional work, celebrates service to others, and is willing to invest in you, you should consider Pref-Tech. Position Overview: A Security System Lead Technician at Pref-Tech will be responsible for leading a small team of security and/or cabling technicians to complete access control, video surveillance, intrusion detection, and related projects safely, within time constraints, at or above quality standards, and within budget. The Lead Technician's duties include, but are not limited to, assisting Project Managers with planning daily tasks, managing materials and equipment, executing installations, troubleshooting, and resolving issues, communicating with customers, reporting progress, conducting quality control inspections, and testing systems. Key Responsibilities: A Security System Lead Technician may be required to perform any of the duties and responsibilities below, but not limited to: • Plan daily tasks with the Project Manager and/or Superintendent., • Conduct safety meetings with team., • Lead, coach, train, manage, and mentor technician team., • Install cabling, mount equipment, install card readers, door contacts, mag locks, electrified strikes, and integrated systems., • Troubleshoot cabling, card readers, door contacts, mag locks, electrified strikes, cameras, PLC's, intrusion detection equipment, and integrated systems., • Maintain a mastery of low voltage systems, relays, principals of normally closed/normally open, series and parallel wiring., • Maintain a general understanding of Ethernet networking., • Master understanding of using multi-meter to test for voltage, continuity, amperage, and resistance., • Possess mechanical and computer skills., • Operate hand tools and equipment necessary to perform all associated tasks, to include lifts., • Document and report progress in a timely manner to Project Managers and customers., • Communicate effectively in written and verbal for with internal staff and customers. Mastery in reading and understanding drawings and equipment schematics is required. • Proven ability to use resources available to them to troubleshoot and resolve issues encountered on projects. Required Qualifications: • High School Diploma or GED Equivalent., • Must be at least 18 years of age., • Must possess a valid TX drivers license, successfully pass an MVR (Motor Vehicle Record) check, and maintain a clean driving record as a condition of continued use of a company vehicle., • At least 5 years of relevant security experience., • At least 2 years of relevant leadership experience., • Willingness to take on new challenges and build on current skills., • Exceptional analytical and conceptual thinking, • Currently licensed or must have the ability to immediately obtain TXDPS Security License., • Familiarity with the following systems:, • Access Control Systems, • Software House, • Genetec, • Honeywell, • HID, • Mercury, • LifeSafety Power, • Video Surveillance/CCTV, • Genetec, • ipConfigure, • Axis, • Hanwha Techwin, • Intrusion Detection, • DMP, • Bosch/Radionics, • Structured Cabling, • Panduit, • Commscope Preferred Qualifications: • Proficiently use MS Word, MS Excel, MS Project, MS Visio, and Adobe, • Understand the basics of IP networking and IP-based equipment, • Low Voltage Industry certifications from ASIS, BICSI, ESA etc. Access Control Manufacture certifications see required familiarity list above. Benefits: • Competitive Salary, • Company Vehicle, • Inclusion in Operational Incentive Program, which shares excess profits as bonuses 401K Safe Harbor Plan with matching dollar-for-dollar up to 4% of annual gross salary (Traditional and Roth options available) • Health, Dental, and other elective insurances, • Travel and Night Work Incentives, • World-class training and professional development Work Hours & Travel: Must be willing to work days and nights. There is no set schedule for field personnel, as work schedules vary depending on client needs. Travel is 10-20% to Pref-Tech offices, job sites, and conferences. Physical Requirements: • Ability to perform physical tasks like walking, standing, driving., • Ability to safely lift and carry up to 50 lbs unassisted., • Comfortable working outdoors in various weather conditions, including heat and rain., • Capable of ascending and descending ladders (614 feet) and stairs of varying heights with minimal restrictions., • Willingness to work from a bucket truck as required for installations and maintenance. Core Values: First and foremost, at Pref-tech, you must understand, internalize, and represent our PGRIT core values: • Professionalism: Our expectations are high, we take great pride in our work, and we communicate well., • Grit: We thrive on challenges. We do what it takes to get the job done., • Right: We know what right is and do it every time., • Intelligent Thought: We plan meticulously, execute decisively, and resolve issues effectively. EEO Statement: Employment is contingent upon successful completion of background investigation and pre-employment drug screen. Pref-Tech maintains a drug-free workplace and conducts random drug screenings as part of our commitment to safety and compliance. All applications and resumes are held in confidence. Only candidates whose profiles closely match requirements will be contacted for an interview. Candidate Screening: Employment is contingent upon successful completion of background investigation and pre-employment drug screen as well as successfully passing an MVR (Motor Vehicle Record) check. All applications and resumes are held in confidence. Only candidates whose profiles closely match requirements will be contacted for an interview. ADA Accommodation Statement If you require reasonable accommodation to apply for a position or to participate in the interview process, please contact Recruiting at .

Job Description If being a part of a world-class organization that operates in some of the most advanced technological environments around the world sounds like a dream job, Network Connex might be the right fit for you! You’ll be part of a team working together to solve customer problems every day, with compensation and benefits that are an investment in your career, financial future, and overall well-being. In addition to competitive base pay, Network Connex offers a comprehensive benefits package designed to support your physical, mental, and financial health you can begin participating in our programs on the first of the month following your start date. Join our Vanguard 401(k) plan, with immediate vesting and a generous company match to help you build long-term financial security. Our team also enjoys 10 paid company holidays, a generous PTO accrual schedule, and access to discounts on useful products and services. Knowledge, Skills and Abilities required: • Will manage all phases of Data Center installation Projects., • Foreman must be able to think strategically and demonstrate “Leadership”., • Will assume total ownership from the receipt of completed engineering “work package” to delivery of project completion and final documentation, • Process and compliance focused, • Ability to work independent of direct supervision; self-starting; Team Player. Good organizational, written, and verbal skills (meticulous regarding documentation)., • Excellent people skills, customer oriented, willingness to help others., • Positive and Proactive approach, • Willingness to travel., • Strong work ethic and ability to have flexible work schedule., • Must demonstrate good customer skills., • Have total responsibility for the job layout and plan of execution., • Must stay current with the latest technologies and installation procedures., • Must have a full understanding of the scope of work., • Must have the ability to understand and accurately complete all paperwork required of assigned project., • Must be able to run small, medium, and large projects when required., • Must be fully competent of the Network Connex standard for quality installation craftsmanship and customer service excellence., • Must be fully competent at installation and termination of various copper and fiber products in accordance with TIA/EIA standards and BICSI standards., • Must be fully competent in testing and troubleshooting of copper and fiber cable plant systems in accordance with TIA/EIA standards and BICSI standards., • Must be fully competent at directing his team in assembling, installing, and securing various cable trays, racks, and cabinets used in telecommunications closets., • Foreman must understand the basic principles of grounding and bonding as described in the BICSI installation methods and must be capable of properly bonding cable trays and properly grounding racks, cable trays, etc., • Foreman must be knowledgeable in the proper operation of all Network Connex Cat5, Cat5E, Cat6 testers to include proper operation of the tester, properly saving test results and properly downloading and storing test results on the network., • Foreman must be knowledgeable in the proper operation of Network Connex fiber power meter testers to include proper operation of the tester, properly saving test results and properly downloading and storing test results on the network., • Foreman must be knowledgeable in the proper operation of an OTDR to include proper operation of the OTDR, properly saving test results and properly downloading and storing the test results on the network., • Foreman must be fully capable of interpreting test results from fiber and copper testers and successfully troubleshooting and properly repairing the fiber or copper cable plant to ultimately ensure a correct and valid test. Education: • High School Diploma or GED required, • BICSI and industry, • The physical demands of this position are those that are necessary to meet the responsibilities and essential functions of this position., • Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions., • Preferred - BICSI Technician, Industry manufacturer certifications, • OSHA30 safety certification, • Ability to drive company vehicle throughout the day., • This position requires a background check and driver’s license check., • Ability to lift various items is required, as well to stand for long periods of time and climb ladders., • Years of Experience: 5 - 10 EEOC-Minority/Female/Disability/Veteran Network Connex believes all persons are entitled to equal employment opportunities and does not discriminate against employees or job applicants because of race, color, gender, affectional or sexual orientation, domestic partnership status, ancestry, religion, national origin, citizenship status, marital status, disability, veteran status, age or any other protected group status. Upon acceptance of an offer, all candidates will be required to pass a background check and drug screening.

Job Description If being a part of a world-class organization that operates in some of the most advanced technological environments around the world sounds like a dream job, Network Connex might be the right fit for you! You’ll be part of a team working together to solve customer problems every day, with compensation and benefits that are an investment in your career, financial future, and overall well-being. In addition to competitive base pay, Network Connex offers a comprehensive benefits package designed to support your physical, mental, and financial health you can begin participating in our programs on the first of the month following your start date. Join our Vanguard 401(k) plan, with immediate vesting and a generous company match to help you build long-term financial security. Our team also enjoys 10 paid company holidays, a generous PTO accrual schedule, and access to discounts on useful products and services. Job Description A field technician focused on long-haul fiber optic cable testing nationwide is primarily responsible for installation, maintenance, and comprehensive testing of fiber networks that transmit data over long distances. This role demands precision, technical expertise, and a willingness to travel extensively. Key Responsibilities Installation and Splicing: Install, terminate, label, and route fiber optic and copper cabling systems in various environments (e.g., underground, aerial, data centers). This includes performing precise fusion and mechanical splicing to ensure low signal loss connections. Testing and Troubleshooting: Conduct comprehensive end-to-end testing using specialized equipment like Optical Time-Domain Reflectometers (OTDRs), power meters, light sources, and visual fault locators to verify network performance, measure signal strength, and diagnose faults. Maintenance and Repair: Possible to perform routine maintenance and respond to emergency calls to troubleshoot and restore service outages promptly. This involves identifying root causes of problems, repairing damaged cables or components, and replacing faulty equipment. Documentation and Reporting: Maintain accurate and detailed records of all installations, test results, repairs, and material usage, often using digital mapping tools or software. Safety and Compliance: Adhere to all safety protocols (e.g., OSHA guidelines) and industry standards (e.g., TIA/EIA) when working with lasers, electrical equipment, and in diverse field environments. Collaboration: Work effectively with engineers, project managers, and other team members to ensure seamless project deployment and completion. Key Qualifications and Skills Experience: Require a minimum of 2-4 years of hands-on field experience in fiber optics or a related telecommunications field. Experience in long-haul or large-scale backhaul projects is highly valued. Ability to read and interpret technical drawings, schematics, and site plans. Technical Proficiency Hands-on experience and troubleshooting ability to use test results to diagnose and solve complex problems in the field by utilizing fiber optic cable and testing specialized equipment to complete the following: • Fiber Inspection and Cleaning, • OTDR (Optical Time Domain Reflectometer), • Power Meter, • Fiber QuickMap, • OLTS (Optical Loss Test Set), • ORL (Optical Return Loss), • Gig-E Testing, • Visual Fault Locator (VFL) Physical and Environmental Demands Ability to perform physically demanding tasks, including lifting up to 50 lbs., climbing ladders, and working in confined or elevated spaces. Willingness to work outdoors in various weather conditions and travel frequently (often up to 80-90%). Soft Skills Strong problem-solving abilities, attention to detail - Meticulousness in tasks like cleaning connectors, which is crucial to avoid inaccurate readings caused by dirt or damage. excellent communication skills to coordinate with installation teams, engineers, and project managers, as well as adaptability to work in various environments and under tight deadlines. , and the capacity to work both independently and as part of a team are essential. Certifications While not always required, certifications like the Fiber Optic Association (FOA) Certified Fiber Optic Technician (CFOT) or other specialized certifications (e.g., in splicing or testing) are highly desirable and can enhance job prospects. Licensing A valid driver's license with a clean driving record is a standard requirement. EEOC-Minority/Female/Disability/Veteran Network Connex believes all persons are entitled to equal employment opportunities and does not discriminate against employees or job applicants because of race, color, gender, affectional or sexual orientation, domestic partnership status, ancestry, religion, national origin, citizenship status, marital status, disability, veteran status, age or any other protected group status. Upon acceptance of an offer, all candidates will be required to pass a background check and drug screening.

Job Description Job Details Level Experienced Job Location Dallas, TX Position Type Full Time Job Category Service/Maintenance Description Our national multi-family management company seeks an experienced Service Manager with a "Whatever it Takes" attitude to be responsible for overseeing the physical property, general maintenance repairs, and apartment make-ready, preventative maintenance, and construction/rehabilitation projects for an apartment community. The Service Manager oversees the maintenance staff and leads by example and must be available to handle groundskeeping and/or pool duties, as needed. JOB SUMMARY Along with the Community Manager, the Service Manager is responsible for overseeing the physical property, general maintenance repairs, and apartment make-ready, preventative maintenance, and construction/rehabilitation projects for an apartment community. The Service Manager oversees the maintenance staff and leads by example and must be available to handle groundskeeping and/or pool duties, as needed. REPORTS TO: Community Manager and Regional Maintenance Supervisor SUPERVISES: Under direction from the Community Manager, supervises all maintenance personnel, including housekeeper. ESSENTIAL FUNCTIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. 1. Under the direction of Community Manager, supervises, trains and schedules maintenance activities for apartment community and maintenance staff., 2. Coordinate, schedule and respond to resident/management requests and work orders for occupied units., 3. Coordinate, schedule and prepare vacant apartment units for move-in., 4. Coordinate and schedule appropriate safety and skills training for maintenance employees., 5. Identify and correct hazardous property conditions that could place the property in a liable position., 6. Ordering supplies and managing maintenance budget., 7. Coordinate, schedule, and perform preventative maintenance on equipment and units. Qualifications REQUIRED EDUCATION AND TRAINING DEGREES AND DIPLOMAS High school diploma or equivalent. Five years of multi-family experience or equivalent combination of education, training and experience that demonstrates the ability to perform the duties of this position. TRAINING/CERTIFICATES/ASSOCIATION MEMBERSHIPS EPA Section 608 (HVAC/Freon Recovery certification) required. Certifications/Permits required City or State to perform job responsibilities required. Training in boiler repair, plumbing and mold detection/resolution required. Certified Apartment Maintenance Technician (CAMT) preferred. Certified Pool Operator (CPO) required. KNOWLEDGE, SKILLS AND ABILITIES Must be able to handle plumbing repairs, tile work, HVAC equipment, appliance repair, carpentry repairs, electrical repair and all facets of apartment make-ready. Must be able to operate common maintenance related tools including but not limited to: key machine, augers, lead detector, ampere meter, volt meter, recovery machine, manifold gauges, charging cylinders, steam clean/shampoo machine, spray paint rig, electric saws, cordless screwdriver, drill, air conditioners, boiler, water heaters, chlorine test kit, various screwdrivers, nut drivers set, pliers, various wrenches, wire crimping/stripping tool, diagonal cutter, drill bits, hammers, tape (ruler), tube cutter (copper), soldering torch and ladders. Must be able to apply common sense and understanding to carry out instructions and plans. Will interact regularly with residents, vendors, contractors, all levels of employees, and Clients and, therefore, must possess excellent interpersonal skills. Must be able to read and write in English in order to read diagrams, meters, instructions, write report, etc. Proficiency in using property management software(s) and Microsoft Office. Experience in compressor diagnosis, fire sprinklers and irrigation systems preferred. Must have basic knowledge of OSHA Requirements and Local, City and State Ordinances. Must supply own hand tools. #ZR

Job DescriptionPosition: Porter/Groundskeeper – Multifamily Location: On-Site Reports To: Lead Maintenance Technician & Property Manager Industry: Multifamily Property Management Job Type: Full-Time or Part-Time | Weekend availability as neededSunRidge Management Group is a trusted name in multifamily property management with a strong track record of success and over 35 years of experience managing apartment communities across the country. From affordable housing to luxury lease-ups, we pride ourselves on delivering exceptional service, operational excellence, and a people-first culture. Our Dallas-based corporate team supports communities coast to coast with a hands-on, detail-driven approach. SunRidge Management Group is an equal-opportunity employer that promotes a drug-free workplace. We believe our people are our greatest strength. That’s why we foster a collaborative, ethical, and resident-focused culture where every team member plays a vital role in our continued success.Position Summary The Porter/Groundskeeper plays a key role in maintaining the overall cleanliness and curb appeal of the apartment community. This position is responsible for the upkeep of grounds, amenities, building exteriors, parking lots, and other common areas. The Porter/Groundskeeper also assists the maintenance team with various tasks to ensure the community remains in optimal condition for current and prospective residents. This role requires strong attention to detail, physical stamina, and a proactive work ethic.Key Responsibilities Grounds & Common Area Maintenance • Walk the property daily to remove litter, debris, and pet waste from common areas., • Keep the following areas clean and presentable at all times: leasing office, pathways, stairwells, laundry rooms, mail centers, pool areas, dumpsters, parking lots, and recreation areas., • Use blowers, brooms, and other tools to clean sidewalks and outdoor walkways., • Perform trash-out duties for vacated units and dispose of abandoned items as directed., • Ensure dumpster areas are clean, with doors closed on windy days., • Detail the grounds regularly, including raking shrub beds and shoveling mud or dirt as needed.Maintenance Assistance, • Assist with general maintenance tasks, including make-ready efforts, when requested., • Perform minor repairs such as screen replacement, light bulb changes, painting, and general upkeep., • Complete interior and exterior painting and basic maintenance duties when assigned., • Change locks, rekey units, and distribute resident communications when requested., • Help clean and organize maintenance shop and storage areas., • Assist with physical tasks such as moving heavy items or cleaning vacant units.Safety & Preventive Maintenance, • Check and replace exterior lighting regularly., • Maintain awareness of potential safety hazards and report issues immediately., • Keep utility meter rooms, shutoffs, and cleanouts accessible and clearly marked., • Lock all storage areas when not in use., • Follow safety guidelines and ensure compliance with OSHA, ADA, and Fair Housing laws., • Complete all required safety training, including Grace Hill courses, by designated deadlines.Qualifications, • Ability to work outdoors in various weather conditions., • Strong attention to detail and commitment to cleanliness., • Must be able to take direction and follow company procedures., • Ability to complete physical tasks including lifting, bending, and climbing., • Must have reliable transportation and a valid driver’s license (if applicable)., • Constant walking and physical activity throughout the shift., • Frequent need to bend, stoop, climb stairs, kneel, push/pull, and lift heavy objects., • Frequent use of hand tools, power equipment, and cleaning supplies., • Hand Tools: Wrenches, hammers, saws, etc., • Power Tools: Blowers, pressure washers, • Enjoy opportunities for professional growth and development within a supportive culture., • Access to benefits including low-cost health, dental, and vision insurance, life and disability coverage., • Voluntary wellness plans (critical illness, accident, hospital indemnity), • Employee Assistance Program, • Access to Financial Planning Resources and Employer-Matched 401(k) Plan xxnrvy5vek

Job Description Bane Machinery is the authorized distributor for several major construction equipment manufacturers including Kobelco, Link-Belt Excavators, Hitachi, Dynapac, Rokbak Trucks and Liebherr. We provide dedicated sales, rentals, parts and service support for our customers. For more information about Bane Machinery log on to . The Service Technician is responsible for safely providing high quality and effective repair of equipment and provides excellent customer service, maintains professionalism, and ensures appropriate and detailed records for time, parts, supplies, purchases and repairs. Presently looking for a Technician to work in the Field locally, but will consider candidates for the In-House Shop as well. Duties and responsibilities include, but are not limited to: • Reconditions and repairs equipment and components., • Maintains complete and detailed working records for time, parts, supplies, and outside purchases for repairs., • Maintains and cares for company assets., • Interacts with customers and co-workers on a daily basis., • Accountable for following all applicable Company, Local, State and Federal rules and regulations including but not limited to those of OSHA, MSHA, DOT., • Ability to diagnose electrical and hydraulic failures, including the use of schematics., • Proficient in the use and application of test and diagnostic equipment such as laptop, multi-meter and pressure gauges. Desired Skills and Experience: • High School diploma, GED or vocational training/certification., • 2-5 years’ experience in the same or similar industry., • Knowledgeable and experienced with hydraulics, electrical, electronic systems, pneumatics, diagnostics and calibration., • Owns and maintains personal tool inventory., • Mechanical/technical aptitude, safe work habits, a good working knowledge of equipment operations and mechanical functions. Works with minimal supervision, customer service oriented, a problem solver, reliable, ethical, able to adapt to the people and environment around them., • Communicates professionally, respectfully and honestly at all times and communication is to be clear and language is to be profanity free while employee demeanor is to be calm and composed. Bane Machinery is an Equal Employment Opportunity employer. We do not discriminate based upon race, religion, color, national origin, gender, sexual orientation, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. Benefits • Health, Dental, Vision, Life Insurance, • 401(k) with matching contribution, • Paid Vacation, Holiday and Personal Time Off, • Paid Uniforms Provided, • Manufacturer Factory Hands-On and Web-Based Training, • Sign-On/Retention Bonus, • Tool Program, • Referral Program, • Competitive Wages