Military mechanic jobs in San Diego, CaliforniaCreate job alerts

Position Description Immediately hiring a Permanent Full Time Experienced Mid-Level Diesel Technician to support our Truck Fleet at Ryder in San Diego, California Hear it from a Ryder Technician Employee Here: • Hourly Pay: $38.01 per hour, • CDL Class A or B is Required, • Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year, • Schedule: Monday–Friday Weekends OFF Apply Here with Ryder Today • On the Job Paid Training, • PPE AND UNIFORMS Issued, • TOOL and BOOT ALLOWANCE provided, • State of the Art Equipment We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more! EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, required, • Two (2) years or more of a combination of classroom training and work experience in required experience, preferred, • Valid Commercial Driver License (CDL) CLASS A,preferred, • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Must be able to obtain CDL within 6 months after hire, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Performs vehicle maintenance and repair duties, • Performs standard vehicle maintenance, • Performs standard component inspections and repairs, • Performs preventive maintenance, • Diagnoses standard mechanical and electronic problems, utilizing diagnostic computer when applicable, • Identifies root cause of basic failures/conditions and perform repairs as required, • Replaces defective components as instructed, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task, • Utilizes key functions of Shop Management System and electronic documentation available, • Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT) Posted Date 1 month ago (2/20/2026 1:11 PM) Requisition ID 2026-196523 Location (Posting Location) : State/Province CA Location (Posting Location) : City SAN DIEGO Location (Posting Location) : Postal Code 92123 Category Technicians/Service Employees4 Employment Type Regular-Full time Travel Requirements 0-10% Position Code 1000120 Min Pay USD $38.01/Hr. Max Pay USD $38.01/Hr.

M1 Support Services, LP 300 N. Elm Street, Suite 101 Denton, TX 76201 m1services.com Aircraft Mechanic I - Aviation Ordnance (Plus Up) Location San Diego, CA Job Posting No 113843 outside bar) to the bottom of the page and click on the "Apply for this position" button. Start Date TBD Contract CFT HSM-41 North Island Salary Range $43.11/Hour Posting Date 01/27/2026 Union Yes FLSA Status Non-Exempt Shift Work Possible FT/PT Full-time Relocation No Travel Possible Job Summary: Aircraft Mechanic I - Aviation Ordnance will be responsible for performing maintenance on various components of military aircraft, specifically focusing on H-60 series helicopters, including the MH60-R. Your duties will span across a variety of systems, including airframes, engines, avionics, landing gear, rotor systems, and more. Primary responsibilities include but are not limited to the following: 1. Aircraft System Repair & Rebuilding: o Perform repairs and rebuilds across all aircraft systems, including structure, engines, rotors, avionics, hydraulic units, and flight surfaces. o Use tools and equipment such as welders, drills, rivet guns, and sheet metal brakes to maintain aircraft parts. 2. Technical Document Interpretation: o Read and interpret maintenance manuals, technical data, and service bulletins to plan and execute repairs on malfunctioning or damaged aircraft components. 3. Aircraft Inspections & Testing: o Conduct regular maintenance inspections (175-hour, progressive, phase, and periodic Hourly and calendar inspections) to detect cracks, leaks, corrosion, or wear on components like engines, turbine blades, and hydraulic systems. o Use testing equipment for engine operations and replace damaged parts. 4. Flight Support Maintenance: o Perform preflight, thru-flight, and post-flight inspections. o Service aircraft (flushing gearboxes, cleaning filters, greasing moving parts, checking brakes). 5. Aircraft Handling: o Jack, tow, moving aircraft, spotting aircraft and maintain aircraft in safe operational condition. o Enter maintenance records and ensure all repairs are documented correctly. 6. Leadership & Supervision: o Lead and supervise junior mechanics, ensuring safety and quality during all tasks. 7. Specialization Areas: o Potential to specialize in areas like engine repair, airframe maintenance, or avionics. All MH60-R Aviation Ordnance 8. Safety & Quality Compliance: o Ensure compliance with all safety and quality procedures, including Hazmat handling and FOD (Foreign Object Damage) prevention. o Participate in safety programs and perform housekeeping duties in the shop. Page 2 of 3 o Maintain detailed records of all maintenance performed in OOMA or similar to OOMA systems ensuring compliance with 4790 and safety standards. Additional Responsibilities: * Participate in Aviation Gas Free Program and obtain necessary support equipment licenses. * Comply with all safety protocols, training requirements, and emergency response duties. * Maintain necessary certifications such as Collateral Duty Inspector (CDI) or Quality Assurance Representative (QAR). Qualifications and Experience: * Education: High school diploma or equivalent. * Experience: o Minimum 5 years of experience with H-60 series aircraft (or equivalent rotary aircraft experience). MH-60R experience preferred. o At least 5 years Aviation Ordnance, MH60-R CDI/CDQAR experience. * Certifications: Ability to obtain and maintain qualifications in line with U.S. Navy instructions (e.g., CDI, QAR). Ordnance certification shall be required to obtain. * Security Clearance: Must be able to pass and maintain a Tier 3 Background Check. Some roles may require a secret clearance. * Technical Skills: Ability to read and interpret technical data, manuals, and special operating instructions. * Language Skills: Must be able to read, write, and understand English. Additional Requirements: * Ability to work with foreign cultures and languages. * Successfully pass a pre-employment drug screen and medical examination. * Ability to meet physical requirements for the position. * Compliance with safety, quality, and environmental regulations. * Must be able to handle and dispose of hazardous materials as required. * Must possess a valid state driver's license. Working Conditions: * Occasional lifting up to 50 pounds. * Computer usage for documentation using codes and clear written and verbal English language required. * Constant use of eye sight abilities while reviewing documents, walking around work areas and constant use of English language speech/hearing abilities for communication. * Constant mental alertness around all work areas, must possess planning/organizing skills, and must be able to work under deadlines. * Climbing aircraft using aircraft step and all types of ladders or stands. Page 3 of 3 * Standing long period of time with minimal sitting. * Ability to work under extreme weather conditions. * Work site has head, hand, hearing, eye, slip and trip hazards shall use proper PPE and proper safety procedures. * Must be able to work all shifts. Full-time employment: however, 40 hours is not guaranteed per-week. Working hours; must be able to be flexible, start time and end time will be dependent on flight schedule and or overall tasking. M1 Support Services, headquartered in Denton, Texas provides a variety of professional, technical, and maintenance services to the Department of Defense and government agencies. M1 Support Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability, or veteran status. M1 Support Services offers a comprehensive benefits package including several options for Medical, Dental, Vision, Life and Dependent Life, AD&D, Short-and Long-term Disability. We also offer Flexible Spending Accounts for qualified health and dependent care expenses, as well as a free Employee Assistance Program.

Maintenance Mechanic Role with Global Product Leader / $25-$35 an hour depending on Experience / Excellent Benefits and Overtime This Jobot Job is hosted by: Ken McClure Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $25 - $35 per hour A bit about us: We are a Repair Industry Leader that has been in business over 50 years looking for a Skilled Maintenance Technician to join our growing team. Why join us? $25-$35 an hour depending on Experience Great Benefits 6am-2:30pm Position Overtime Available Job Details We are seeking a skilled Maintenance Mechanic to join our team and ensure the safe, reliable, and efficient operation of our industrial fabrication equipment. This role involves performing preventive maintenance, troubleshooting, and repairs, as well as supporting fabrication activities such as laser welding and bending operations. Key Responsibilities: Follow preventive maintenance (PM) schedules to minimize downtime and extend equipment life. Diagnose, troubleshoot, and repair mechanical, electrical, hydraulic, and pneumatic issues on fabrication equipment. Perform fabrication work including laser welding, bending, and related processes to support equipment repairs and modifications. Maintain, repair, and improve industrial machinery and production support systems. Document maintenance activities, repairs, and parts usage accurately. Ensure compliance with safety standards and company procedures at all times. Collaborate with production teams to minimize equipment interruptions and maximize uptime. Qualifications: Proven experience as a Maintenance Mechanic or Industrial Maintenance Technician in a fabrication or manufacturing environment. Strong knowledge of mechanical systems, hydraulics, pneumatics, and electrical troubleshooting. Hands-on experience with laser welding, bending, and fabrication processes. Ability to read and interpret technical manuals, blueprints, and schematics. Strong problem-solving skills and attention to detail. Ability to work independently and manage time effectively. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Generator Mechanic with industry leader / $30 - $45 an hour depending on experience / Great Benefits and Room for Growth This Jobot Job is hosted by: Travis Bergwall Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $30 - $45 per hour A bit about us: We are a long-established equipment solutions provider serving customers across a large regional territory. Our organization specializes in heavy equipment, power systems, and industrial solutions, delivering high-quality sales, parts, and service support. Our success is driven by our people, and we are committed to supporting both our customers and employees with excellence. Why join us? $30 - $45 per hour based on experience Flexible Hours Great Benefits Room for Growth 401K Job Details Required Skills & Experience • Experience working with diesel and natural gas engines, electrical switchgear, automatic transfer switches, and balance of plant equipment., • Strong understanding of power generation systems, power electronics, electronic controls, and fuel systems., • Ability to read electrical schematics and mechanical drawings., • Proficiency in Microsoft Office applications., • Strong customer service and relationship management skills., • Proactive problem-solving mindset with high responsiveness., • Excellent written and verbal communication skills., • Hands-on mechanical and electrical aptitude., • Must be 21 years of age or older., • Industry certification (e.g., EGSA certification)., • High school diploma or equivalent preferred., • 3+ years of field experience in electrical power generation or related industry experience. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Additional qualification information can be found from the following Office of Personnel Management web site: Federal Wage System Job Grading Standard for Aircraft Engine Mechanic, 8602 (opm. You must be able to travel on military and commercial aircraft for extended periods of time. The Screen-out

Job DescriptionFounded in 2015, Shield AI is a venture-backed deep-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include the V-BAT and X-BAT aircraft, Hivemind Enterprise, and the Hivemind Vision product lines. With offices and facilities across the U.S., Europe, the Middle East, and the Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit . Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description: Shield AI is seeking an engineering manager of Mechanical Design to support the development of our next-generation autonomous UAV platform. In this high-ownership, high visibility role you will lead a team of engineers developing mechanical systems to support Shield AI’s next generation aircraft program(s). You will work the director of engineering in a deputy capacity to support collaboration across engineering sites, align technical leaders, create mentorship opportunities for junior engineers, and assist in leveling engineering resources across vehicles and programs. You will set the bar for excellence through technical demonstration, guidance, and mentorship. What you'll do: • Support design reviews by providing feedback and signoff., • Scope resources to support aircraft development., • Assign individuals to projects and rebalance needs as required., • Create processes and documentation that guide the development of systems.Required qualifications:, • B.S. in Mechanical/Aerospace Engineering, • Demonstrable and successful leadership experience including hiring, budgeting,, • 7+ years in mechanical or mechanism design, • Strong CAD skills (NX preferred), • Kinematic analysis and optimization, • Structural analysis utilizing hand calculations and finite element methods, • FEA analysis: Modal, non-linear and linear, buckling, fatigue, • GD&T and tolerance stack-ups for mechanical systems, • Materials selection inclusive of alloys, heat treatments, allowables, and finishes, • Ability to work independently and lead in fast-paced, cross-functional teams, • A demonstrated record of working hard, being trustworthy, holding yourself to high standards, and being kind to others Preferred qualifications:, • Experience with UAVs, aircraft, or robotic systems, • Familiarity with electro-mechanical actuators, • Proficiency in FMEA, DOE, and root cause analysis, • Hands-on machine shop or mechanic experience (professional or hobby), • RTCA DO-160, structural, or actuated mechanism testing experience Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Outside Machinist (San Diego, CA)Lead Marine San DiegoNational City, CA, USAFull Time$28.00 to $32.00Must be open to 1st Shift (6:00am – 2:30pm) or 2nd Shift (3:00pm – 11:30pm)Lead Marine has immediate openings for Marine/Navy Mechanics in the San Diego Naval Shipyard Industry. Must have navy repair/marine mechanic or prior military experience. Must be DBIDs Badge eligible to gain access to Naval Bases. Responsibilities: • Must have at least 4 years of naval ship mechanical experience, preferably on fire suppression systems and damage control systems., • Install, adjust, set and repair or replace various control. Regulating or safety devices such as meters, gauges, valves, governors and automatic alarms. Test or assist in testing of shipboard machinery., • Lays out passage holes on bulkheads, decks, and other surfaces for connections, for example shafting and steam lines., • Must have knowledge of NAVSEA Standard Items applicable to position, • Manage and ensure that daily required tasks are completed on time and in a safe manner., • Detect and locate grounds, open circuits and short circuits in distribution generators and systems. Maintain and repair telephones, circuits, and associated equipment., • Install new power and lighting circuits.Requirements:, • Prior Naval experience a plus, • Utilize smart device applications to manage / schedule inspection documentation., • Complete all required paperwork and upload to database., • Document required deficiencies and items required for repair., • Must be able to read and interpret blueprints, drawings and schematics., • Valve & auxiliary maintenance/repair, • Candidates must be able to work as part of a team and may be asked to work weekends and overtime.Benefits:, • Health insurance, • Paid holidays

Job DescriptionOUR CORE PILLARS: Safety | Operational Excellence | Shareholder ValuePropulsion Controls Engineering has a current opening for a Marine Outboard Mechanic, with a minimum 3 years of marine and/or shipyard experience; at our San Diego, CA location. Position Summery A Marine Outboard Mechanic will diagnose, adjust, repair or overhaul outboard boat engines. Essential Duties and Responsibilities: * Maintain or repair engines, with an emphasis on Evinrude outboard engines. * Analyzes defects and adjusts or repairs electrical mechanical systems of outboard motors. * Disassembles and inspects motor for defective parts, using mechanics hand tools and gauges. * Replaces parts, like gears, magneto points, piston rings and spark plugs and reassembles engine. * Perform routine engine maintenance. * Maintain repair or maintenance records. • Demonstrates ability to appear for work on time, follow directions from a supervisor, interact well with co-workers, understand and follow work rules and procedures, comply with corporate policies, goals and objectives, accept constructive feedback, establish goals and objectives, and exhibit initiative and commitment. Education and Experience: • High School diploma or GED certificate or equivalent education and experience., • Ability to work at a high level of accuracy and attention to detail., • Ability and tolerance to meet due dates and deadlines and/or time constraints., • Health Insurance (medical, dental, vision, company paid life insurance, voluntary plans such as supplemental life insurance, critical illness, and hospital indemnity), • Paid Time Off, • Company paid holidays, • Retirement savings plan (401(k) plan with company matching and an Employee Stock Ownership Plan) MARINE OUTBOARD MECHANIC EEO/AA/Vet/Disabled #zr

Job Description OUR CORE PILLARS: Safety | Operational Excellence | Shareholder Value Propulsion Controls Engineering has a job opening for an Outside Machinist Journeyman Diesel Mechanic, with a minimum of 5 years diesel experience preferred. PCE is a full service electro-mechanical repair and diesel repair contractor. PCE has garnered a wealth of extensive experience in successfully executing major system overhauls across numerous ports throughout the world on virtually every class of ship currently in operation. Job Summary / Outside Machinist: Diesel Mechanic Perform major and specialized mechanical overhaul and repair work on diesel marine engines and related marine equipment and systems using work specifications and technical manuals. Duties and Responsibilities • Maintain detailed records of maintenance and repair work performed., • Maintain open communication with the management team regarding job status, updates, and changes., • Communicate effectively with customers regarding repair needs and solutions., • Provide guidance and training to junior mechanics and apprentices., • Order and manage inventory of parts needed for repairs., • Must be 18 years of age or older to apply., • Minimum 5 years of marine and/or shipyard experience preferred., • Health Insurance (medical, dental, vision, company paid life insurance, voluntary plans such as supplemental life insurance, critical illness, and hospital indemnity), • Paid Time Off, • Company paid holidays, • Retirement savings plan (401(k) plan with company matching and an Employee Stock Ownership Plan OUTSIDE MACHINIST JOURNEYMAN DIESEL MECHANIC EEO/AA/Vet/Disabled #zr Copyright © 2024, ADP, Inc. All rights reserved.Privacy|Legal|Requirements|Artificial IntelligencePowered by

Job Description GENERAL DESCRIPTION This is job is at a Depot Level repair facility maintenance on types of aircraft, which include, but not limited to AV-8, C-130, C-2, E-2, EA-6B, F/A-18, H-1, H-53, H-60, MQ-8, P-3, P-8, T-34, F-35 and V-22. Military Intermediate level experience is a plus DUTIES • Reviews blueprints, schematics, and safety procedures while complying with engineering specifications and maintenance instructions utilizing NDMS CONOPS systems., • Disassemble, repair, rework and complete overhaul of various components such as Tire/Wheel assemblies, Brake systems, landing gear, shock absorbers, arresting gear to include tail hooks and launch bars., • Repair engine mounts, wing support structures and various aircraft mechanisms., • Rig, adjust, and calibrate aircraft slings and other support equipment for all aircraft platforms., • Assist Engineers with component discrepancies and investigations., • Performs final testing and certification of assemblies using hydraulic test bench equipment and associated support equipment., • High School Diploma or equivalent, • A&P license not required but a plus, • Experience on CH-53 aircraft preferred, • Minimum 4 years of aircraft mechanic experience, • Prefer experience from military fixed wing community or civilian heavy structure background, • Experience in heavy structure U.S. Military or related FAA or civil aviation, • Must have Military, Intermediate and/or DEPOT level maintenance experience, • Must provide own tools as required, • Up to 25% travel may be required, • Must be a US Citizen, • Must have or be able to obtain a secret clearance., • Must be able to walk, stand, crawl, kneel and bend on level and/or inclined surfaces for certain periods throughout the day., • Must be able to climb stairs, ramps, ladders, and work stands., • Must be able to crouch, crawl, grasp, pull over hand, push, reach or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders., • May be required to lift up to 44 pounds and heavy, moderate carrying up to 44 pounds., • May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools., • Must be able to see imperfections, micrometer readings and other small scales with or without corrective lens., • Must be able to communicate by voice and detect sound by ear., • Must be able to distinguish color, shades of color and judge three-dimensional depth., • Work in an inside/outside environment to include working around machinery, objects, vehicles, ladders, and scaffolds., • Excessive noise and vibration that can be intermittent or constant., • Environmental conditions can included but not limited to dust, silica, asbestos, fumes, smoke, gas, solvents such as degreasing agents, grease, oils, and electrical energy, • Working on slippery or uneven surfaces, • Working closely with others or working alone TNC and its subsidiaries fall under ANCSA and are entitled under Federal Law to extend hiring preferences to its shareholders. ANCSA provides TNC the authority to give shareholder preference in hiring. TNC reaffirms its belief in equal employment opportunity for all employees and applicants for employment. Tyonek is an Equal Opportunity Employer and a VEVRAA Federal Contractor who affords equal employment opportunity to protected veterans and people with disabilities: Tyonek Native Corporation provides all employees and job applicants' equal employment opportunities in hiring and promotion without discrimination because of age, sex, sexual orientation, genetic information, gender identity, marital status, race, religion, color, veteran status, physical or mental disability, national origin, or any other reason prohibited by law. #jsfirm Job Posted by ApplicantPro

Job Description Outside Machinist (San Diego, CA)Lead Marine San DiegoNational City, CA, USAFull Time$28.00 to $32.00Must be open to 1st Shift (6:00am – 2:30pm) or 2nd Shift (3:00pm – 11:30pm)Lead Marine has immediate openings for Marine/Navy Mechanics in the San Diego Naval Shipyard Industry. Must have navy repair/marine mechanic or prior military experience. Must be DBIDs Badge eligible to gain access to Naval Bases. Responsibilities: • Must have at least 4 years of naval ship mechanical experience, preferably on fire suppression systems and damage control systems., • Install, adjust, set and repair or replace various control. Regulating or safety devices such as meters, gauges, valves, governors and automatic alarms. Test or assist in testing of shipboard machinery., • Lays out passage holes on bulkheads, decks, and other surfaces for connections, for example shafting and steam lines., • Must have knowledge of NAVSEA Standard Items applicable to position, • Manage and ensure that daily required tasks are completed on time and in a safe manner., • Detect and locate grounds, open circuits and short circuits in distribution generators and systems. Maintain and repair telephones, circuits, and associated equipment., • Install new power and lighting circuits.Requirements:, • Prior Naval experience a plus, • Utilize smart device applications to manage / schedule inspection documentation., • Complete all required paperwork and upload to database., • Document required deficiencies and items required for repair., • Must be able to read and interpret blueprints, drawings and schematics., • Valve & auxiliary maintenance/repair, • Candidates must be able to work as part of a team and may be asked to work weekends and overtime.Benefits:, • Health insurance, • Paid holidays

Job DescriptionFounded in 2015, Shield AI is a venture-backed deep-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include the V-BAT and X-BAT aircraft, Hivemind Enterprise, and the Hivemind Vision product lines. With offices and facilities across the U.S., Europe, the Middle East, and the Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit . Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description: Are you a passionate and innovative product design engineer looking to help develop state of the art AI and aircraft products? Are you eager to make a positive difference in the world? Do you want to work alongside mission driven and values focused teammates? Shield AI is just the place for you! As a Mechanical Engineer, you will be responsible for contributing to the mechanical design and development of Shield AI's autonomous UAV products. You will help architect new products, perform the detailed design of complex electro-mechanical assemblies, and will use best in class design and analysis tools. You will collaborate closely with internal and/or external partners to prototype, test and release products to production. You will also help ensure product features achieve performance, schedule and reliability goals. What you'll do: • Design complex electro-mechanical mechanisms for autonomous aircraft, • Own the full design process: concept, CAD, tolerance analysis, material selection, and drawing release, • Perform structural and kinematic calculations and preliminary FEA, • Prototype, test, and iterate mechanism designs for functionality and reliability, • Collaborate with electrical, avionics, flight controls, and propulsion teams, • Mentor junior engineers and promote engineering excellence, • Support pre-production builds, prototype integration, and ground/flight testingRequired qualifications:, • B.S. in Mechanical/Aerospace Engineering, • 8+ years in mechanical or mechanism design, • Strong CAD skills (NX preferred), • Kinematic analysis and optimization, • Structural analysis utilizing hand calculations and finite element methods, • FEA analysis: Modal, non-linear and linear, buckling, fatigue, • GD&T and tolerance stack-ups for mechanical systems, • Materials selection inclusive of alloys, heat treatments, allowables, and finishes, • Ability to work independently and lead in fast-paced, cross-functional teams, • A demonstrated record of working hard, being trustworthy, holding yourself to high standards, and being kind to othersPreferred qualifications:, • Experience with UAVs, aircraft, or robotic systems, • Familiarity with electro-mechanical actuators, • Proficiency in FMEA, DOE, and root cause analysis, • Hands-on machine shop or mechanic experience (professional or hobby), • RTCA DO-160, structural, or actuated mechanism testing experience Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description GENERAL DESCRIPTION This is job is at a Depot Level repair facility maintenance on F-18 aircraft. Military aviation platform experience is a plus. This position will require a government issued clearance. DUTIES • Perform a full range of aircraft sheet metal duties including, but not limited to, disassemble, modify, repair, and reassemble complex aircraft metal items and systems, e.g., bulkheads, airframes, spars, air scoops, wings, flaps, pylons, sponsons, fuselages, skins, ribs, gussets and fuel tanks. These items and systems have combined straight and curved edges and irregular curves and planes, • Analyze and evaluate structural damage to metal systems and items; develop patterns using a combination of parallel and radial line development; fabricate, install, and repair a variety of items and systems made from a wide variety of metals, e.g., stainless steel, copper sheet, magnesium, honeycomb, alloys, aluminum; replace sections and patch old systems; cut, bend, shape, and form metals for items that have numerous irregular angles, planes, and curves with varying pitch and circumference; use a variety of assembly joints, complex fastening systems, riveted or welded joints, drill or punch holes; and assemble or repair items by seaming, bolting, screwing, riveting, tacking. Assembly methods shall meet appearance and strength standards, as well as critical tolerances. As a condition of employment Contractor personnel will be required to pass a FRCW administered certification skills examination, • Use precision measuring instruments such as calipers, protractors, snap ring, height, depth, dial and screw pitch gauges, squares, rulers, trammel points, and sine bars, • High School Diploma or equivalent, • Minimum 4 years Sheetmetal Mechanic (Aircraft Mechanic II) experience, • F-18 aircraft experience preferred, • A&P license not required but a plus, • Prefer experience from military fixed wing community or civilian heavy structure background, • Experience in heavy structure U.S. Military or related FAA or civil aviation, • Up to 25% travel may be required, • Must be a US Citizen, • Must be able to obtain and/or maintain a secret clearance, • Must be able to walk, stand, crawl, kneel and bend on level and/or inclined surfaces for certain periods throughout the day., • Must be able to climb stairs, ramps, ladders, and work stands., • Must be able to crouch, crawl, grasp, pull over hand, push, reach or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders., • May be required to lift up to 44 pounds and heavy, moderate carrying up to 44 pounds., • May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools., • Must be able to see imperfections, micrometer readings and other small scales with or without corrective lens., • Must be able to communicate by voice and detect sound by ear., • Must be able to distinguish color, shades of color and judge three-dimensional depth., • Work in an inside/outside environment to include working around machinery, objects, vehicles, ladders, and scaffolds., • Excessive noise and vibration that can be intermittent or constant., • Environmental conditions can included but not limited to dust, silica, asbestos, fumes, smoke, gas, solvents such as degreasing agents, grease, oils, and electrical energy, • Working on slippery or uneven surfaces, • Working closely with others or working alone TNC and its subsidiaries fall under ANCSA and are entitled under Federal Law to extend hiring preferences to its shareholders. ANCSA provides TNC the authority to give shareholder preference in hiring. TNC reaffirms its belief in equal employment opportunity for all employees and applicants for employment. Tyonek is an Equal Opportunity Employer and a VEVRAA Federal Contractor who affords equal employment opportunity to protected veterans and people with disabilities: Tyonek Native Corporation provides all employees and job applicants' equal employment opportunities in hiring and promotion without discrimination because of age, sex, sexual orientation, genetic information, gender identity, marital status, race, religion, color, veteran status, physical or mental disability, national origin, or any other reason prohibited by law. #jsfirm Job Posted by ApplicantPro

Job DescriptionBefore applying to this job opening, please review the Company's Applicant Privacy Policy located at: This Applicant Privacy Policy governs the Company's collection, use, and sharing of personal information you provide during the application process. Mobile Technician II - Kearny Mesa Ford Non-exempt Job Summary: Mobile Technician II is responsible for performing automotive repairs and service in accordance with store and factory standards. This individual utilizes their skills to diagnose and resolve the different sources of automotive problems swiftly and accurately. The Mobile Technician II works with all service personnel and management to ensure the satisfaction of our customers. Essential Functions: • Perform work as outlined on the repair order with efficiency and accuracy in accordance with dealership and manufacturer standards., • Diagnose the cause of malfunctions and perform work specified on the repair order efficiently and in accordance with dealership and/or factory standards., • Perform maintenance, minor repairs, and vehicle recalls and complete all work according to the applicable safety requirements., • Road-test vehicles to ensure quality of repair work and ensure that customer's vehicles are returned to them as clean as they were prior to being serviced., • Accurately record time spent on repairs utilizing company time clocking procedures., • Document work performed and test procedures/results on paper-based repair orders., • Responsible for providing and maintaining an inventory of standard mechanic tools, such as screwdrivers, wrenches, socket wrenches, pliers, hammers, chisels, and punches, as well as other tools necessary for the technician's work; ensure "special tools" are returned to their proper place., • Use shop supplies and materials in a practical and economical manner., • Maintain an organized and clean workspace., • Conduct multipoint inspections (MPI), explain findings and necessary repairs to customers, and identify additional service opportunities based on vehicle inspection and customer needs., • Promote and sell maintenance packages, extended warranties, and other dealership services., • Collect customer signatures and payment on repair orders., • Enter repair and test procedures/results using a computer at the dealership., • Travel to off-site locations within a designated area in company assigned vehicles to complete mobile maintenance; locations may be at a residence or business., • Follow all federal, state, and local regulations governing automotive service and repair, including Cal/OSHA., • Participate in team meetings and training sessions to stay updated on the latest automotive technologies and repair techniques., • Adhere to all safety protocols and procedures; including wearing protective gear and equipment as required., • Maintain satisfactory attendance. Minimum Qualifications: • At least one year of verifiable driving experience., • 1 year experience as an entry-level automotive technician, or 1 year of completed automotive hands-on course work., • Valid driver’s license and safe driving record; required to have California driver's license within 30 days following date of hire., • Knowledge of federal, state and local regulations that affect operations., • Ability to lift up to 50 pounds., • Willingness to participate in ongoing training and professional development., • Completion of National Automotive Technicians Education Foundation (NATEF), a certified technical training program in automotive technology at a high school or at a community college, as the best preparation for entry-level positions., • Acquire and maintain manufacturer and Automotive Service Excellence (ASE) certifications by completing the necessary and required training., • Knowledge of all aspects of vehicle repair., • Excellent mechanical repair skills., • Excellent analytical and problem-solving skills., • Ability to visually diagnose mechanical issues., • Proficient with computer diagnostic equipment and software., • Ability to read and interpret service and repair manuals., • Ability to perform repairs in a timely fashion., • Frequently stand, walk, sit; use hands; reach with hands and arms; talk and listen., • Occasionally climb or balance; bend, stretch, stoop, kneel, crouch, squat or crawl to perform repairs and inspections., • Manual dexterity to handle tools and small parts., • Work in a fast-paced environment and meet deadlines., • Frequently lift 30 pounds and occasionally lift up to 50 pounds., • Work is conducted outside at customers residence or place of business., • Noise level in the work environment may be loud., • May encounter many odors in the work area some of which may be hazardous; Frequent exposure to contaminants such as antifreeze and chemical degreasers., • Exposure to hazardous conditions and equipment that may result in minor injuries., • May encounter variety of weather conditions working outside., • May occasionally walk on slippery surfaces., • Note: Use of personal protective equipment (PPE) may be required., • Work both indoors and outdoors, • Medical Insurance, • Dental Insurance, • Vision Insurance, • Employer Paid Life Insurance, • Employer Paid AD&D, • 401k (with Employer match), • Vacation Package, • Tenure recognition and awards, • Vehicle Purchase Discount Program, • Vehicle Service Discount Program, • Golf Benefits at Maderas Golf Club (subject to qualification) If you receive an offer of employment, it will be a conditional offer contingent on the successful completion of a pre-employment drug screen and background check. Sunroad is committed to providing reasonable accommodations to qualified individuals with disabilities to ensure equal employment opportunities and access to all programs, services, and activities. If you require accommodations to participate in the application process or to perform the essential functions of the job, please contact the HR Department to discuss your needs confidentially. We will work with you to identify appropriate accommodations based on your specific circumstances and in compliance with applicable laws. We are an Equal Opportunity Employer (M/F/D/V) and maintain a drug-free workplace. If you receive an offer of employment, it will be a conditional offer contingent on the successful completion of a pre-employment drug screen and background check. Sunroad is an Equal Employment opportunity and Affirmative Action Employer. We are committed to providing equal opportunity in all of our employment practices, including selection, race (including traits historically associated with race such as hair texture and protective hairstyles such as braids, locks, and twists); religion; religious creed; religious dress/grooming; color; age (40 and over); sex; sexual orientation; gender; gender identity (meaning a person’s identification as male, female, a gender different from the person’s sex at birth, or transgender); gender expression (including a person’s gender-related appearance or behavior, whether or not stereotypically associated with the person’s sex at birth); national origin; ancestry; citizenship status; uniform service member status; military or veteran status; marital status; pregnancy; childbirth; medical conditions related to pregnancy, childbirth, or breast feeding; medical condition (including cancer related or HIV/AIDS related); handicap; physical disability; mental disability; genetic characteristics; genetic information; or any other protected status in accordance with the requirements of all federal, state and local laws. Our Equal Employment Opportunity Policy applies equally to interns and volunteers. Company DescriptionFounded in 1977, Sunroad Enterprises is a diversified holding company based in San Diego. Sunroad consists of three distinct divisions: Automotive, Real Estate and Maderas Golf. With successful ventures across multiple countries, we bring a strategic focus to seeing developments come to life. Sunroad Enterprises is one of the largest minority-owned businesses in San Diego and has earned numerous quality commendations from local, regional, and national organizations. Please visit our website to learn more about our endeavors and career opportunities: in 1977, Sunroad Enterprises is a diversified holding company based in San Diego. Sunroad consists of three distinct divisions: Automotive, Real Estate and Maderas Golf. With successful ventures across multiple countries, we bring a strategic focus to seeing developments come to life. Sunroad Enterprises is one of the largest minority-owned businesses in San Diego and has earned numerous quality commendations from local, regional, and national organizations. Please visit our website to learn more about our endeavors and career opportunities:

We’re looking for enthusiastic, self-driven, individuals to assist existing and prospective clients within our organization.This position will work with multiple clients throughout the day providing outstanding service and product knowledge.Distributes all benefit enrollment materials and

Energy - Solar & Storage [Field Technician / Maintenance Mechanic] As a Field Service Technician at Tesla, Inc.

Call Center / Remote] - Anywhere in U.Competitive pay / Medical, dental & vision / 401k / PTO - As a Customer Service Rep at Planet Home Lending, you will: Respond to borrower inbound calls concerning their account, ensuring high quality service and adhering to productivity and regulatory requiremen

Responsibilities: Schedules, oversees and may assist assigned contractors ensuring the safety, quality and cleanliness of work performed.Escorts contractors in critical areas when required.Performs building repairs including drywall, paint, wall-covering, ceiling tile and grid, carpet and tile floor

InterSolutions - - Responsibilities: Complete service tickets and work orders efficiently and accurately; Prepare vacant apartments for new residents by managing the turnover process; Keep grounds and common areas clean and free of debris; Deliver exceptional customer service to residents; Perform

The Geo Group - - Responsibilities: Operate equipment and machinery for preventive, corrective, and emergency maintenance; Survey assigned jobs and ensure that sufficient and proper materials and tools are on hand; Direct and inspect the work of detainee maintenance staff, providing technical assis

ABM Industries - - Responsibilities: Travel to customer sites to inspect, test, troubleshoot, perform start-up and collect data on electrical systems.Observe testing, assign work on projects to capable technicians, ensure testing of similar items is consistent across test technicians; Track project

Energy - Solar & Storage [Field Technician / Maintenance Mechanic] As a Field Service Technician at Tesla, Inc.

Camping World - - Responsibilities: Provide and document complete diagnostic test and repair or replacement services to customers; Perform electrical, plumbing, carpentry and appliance maintenance; Track all parts and materials used in repairs or replacements; Keep supervisor appraised of work prog

Enterprise - JobID: 545660 [Maintenance Mechanic] As a Maintenance Technician at Enterprise, you'll: Perform complete vehicle maintenance inspection including tires, brakes, and all fluid levels; Perform preventive maintenance (oil change, etc) service according to manufacturers specifications and g

Energy - Solar & Storage [Field Technician / Maintenance Mechanic] As a Field Service Technician at Tesla, Inc.

FedEx - - Responsibilities: Provide timely, quality maintenance for FedEx vehicle fleet and ground support equipment; Document work and maintain inventory using FedEx computer systems; Ensure work is in accordance with OSHA and DOT standards; Guide and support a staff of technicians and trainees; P

Budweiser - - Responsibilities: Repairs, replaces, adjusts, and aligns components of machinery and equipment; Performs routine preventative maintenance and repairs to manufacturing equipment; Observes electrical and mechanical devices in operation to locate causes of trouble; Respond to emergency m

Island Hospitality Management - - Responsibilities: Drive the hotel's preventative maintenance (PM) program with consistent completion of guestroom PMs, public-area PMs, kitchen/bar equipment PMs, and all mechanical/electrical system inspections; Complete basic to intermediate repairs on electrical

Avenue5 Residential - - Responsibilities: Address apartment and property maintenance duties as specified by the maintenance supervisor and/or property manager; Maintain work order system by verifying all orders are completed in a timely manner to company standards and the resident's satisfaction; I

Alsco Uniforms - 760 Shadowridge Drive - Responsibilities: Installs, repairs and performs preventative maintenance on industrial processing equipment, water levels, water systems and other equipment and systems; Troubleshoots electrical issues; Responds to daily maintenance requests in a timely fash

InterSolutions - - Responsibilities: Complete service tickets and work orders efficiently and accurately; Prepare vacant apartments for new residents by managing the turnover process; Keep grounds and common areas clean and free of debris; Deliver exceptional customer service to residents; Perform

Aerotek - - Responsibilities: Maintain and operate equipment such as boilers, hot water heaters, and rooftop HVAC units.Perform maintenance tasks in plumbing, carpentry, painting, cement applications, and electrical work.Monitor, adjust, and maintain the wastewater system, coordinating necessary re

LAZ Parking - - Responsibilities: Regular and punctual attendance is paramount to this position; Consult in daily preventative maintenance; Daily Maintenance of machines, painting of curbs and other misc work; Must be able to use Power tools; Report concerns or needs to direct supervisor in the cas

The Geo Group - - Responsibilities: Operate equipment and machinery for preventive, corrective, and emergency maintenance; Survey assigned jobs and ensure that sufficient and proper materials and tools are on hand; Direct and inspect the work of detainee maintenance staff, providing technical assis

Qualified applicants will receive consideration for employment without regard to race, color, religious creed, sex (including pregnancy, childbirth, breast-feeding and related medical conditions), sexual orientation, gender identity, gender expression, national origin or ancestry, age, mental or phy

Ability to meet the physical demands for this position, which frequently include: the ability to remain in a stationary position, including standing up to 90% of the time, the ability to move and transport up to 25 pounds, the ability to move about inside and outside of the store, and the operation

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Customer service representative agent experience not required.Remote Work From Home Customer Service Representative Agent - Part Time Market Rese

Job Title: Customer Service Representative Invoice Specialist.Location: San Diego, CA 92121 (Onsite).Schedule: Monday Friday, 8:00 a.Duration: 3 months, with possible extension based on performance and business need.A growing medical device organization is seeking a temporary Customer Service Repr