Piece work jobs in Wayne, New JerseyCreate job alerts

LanceSoft is seeking a travel Radiation Therapist for a travel job in Pompton Plains, New Jersey. Job Description & Requirements • Specialty: Radiation Therapist, • Discipline: Allied Health Professional, • Start Date: 06/08/2026, • Duration: 13 weeks, • 37.5 hours per week, • Shift: 8 hours, days, • Employment Type: Travel Job Function 1: Accurately delivers the planned course of radiation therapy while correctly operating the treatment units with minimal supervision.Maintains visual and audible communication with the patient during treatment. Responsible for performing daily linac and CT QA as well as monthly CT QA. Accurately performs IGRT, SBRT treatment. and portal imaging. Job Function 2: Accurately CT/Simulates patients for radiation therapy following department and site specific protocols. Properly constructs immobilization devices as needed. Understands and is able to use IV contrast for simulation when needed. Accurately performs respiratory gating and ACQ sim. Understands and knows how to use simulation equipment for SBRT treatment. Constructs electron and cerrobend blocks when needed. Is able to properly bill for special devices and simulation procedure. Accurately completes the procedure verification assessment in MOSAIQ prior to the start of simulation. Job Function 3: LEAD CT THERAPIST Accurately CT/Simulates patients as in Job Function2. Is responsible for training all therapists in CT/Simulation which includes AcQ simulation, respiratory gating, CT and laplaser QA, mould room duties and SBRT simulation. Also makes sure all necessary forms required for completion by physicians are downloaded and ready for physician completion. Job Function 4: Maintains and verifies all aspects of MOSAIQ for daily treatment management,i. E. treatment calendar, patients schedules, prescription, photos, DRR's and portal imaging. Verifies all physics and physician treatment planning parameters. Attends weekly chart rounds and has the ability to access McKesson for inpatient transportation. Is able to send and review information as needed in the Quality Check List. Job Function 5: Follows all department policies and procedures and adheres to the department dress code. Follows all safety standards. Utilizes correct body mechanics procedure and equipment such as slide board and ceiling lift. Practices the ALARA principle for radiation protection for patients and staff. Responsible of current knowledge of all emergency procedures for the department as well as each piece of treatment equipment. Reports any malfunctions of equipment in relation to patients treatment to physician, lead therapist,manager,and physicist. Job Function 6: Is able to safely operate CT on rails for IGRT delivery and can accurately perform IGRT on all sites. Understands how to electronically create IGRT document and shift tracking assessment in MOSAIQ. Job Function 7: Maintains records of daily treatment and other records as required. Checks prescription, set-up instructions, and patient information daily in the chart and in the record and verify system. Accurately records the daily treatment plan monitor units in the chart for each treatment. Recognizes any changes in a treatment plan and consequently implements and documents the change. Skills: Successful completion of an approved course in Radiation Therapy ARRT certified and registered Education: Successful completion of an approved course in Radiation Therapy Attachments: About LanceSoft Established in 2000, LanceSoft is a Certified MBE and Woman-Owned organization. Lancesoft Inc. is one of the highest rated companies in the industry. We have been recognized as one of the Largest Staffing firms and ranked in the top 50 fastest Growing Healthcare Staffing firms in 2022. Lancesoft offers short- and long-term contracts, permanent placements, and travel opportunities to credentialed and experienced professionals throughout the United States. We pride ourselves on having industry leading benefits. We understand the importance of partnering with an expert who values your needs, which is why we’re 100% committed to finding you an assignment that best matches your career and lifestyle goals. Our team of experienced career specialists takes the time to understand your needs and match you with the right job Lancesoft has been chosen by Staffing Industry Analysts as one of the Best Staffing Firms to Work for.LanceSoft specializes in providing Registered Nurses, Nurse Practitioners, LPNs/LVNs, Social Workers, Medical Assistants, and Certified Nursing Assistants to work in Acute Care Centers, Skilled Nursing Facilities, Long-Term Care centers, Rehab Facilities, Behavioral Health Centers, Drug & Alcohol Facilities, Home Health & Community Health, Urgent Care Clinics, and many other provider-based facilities. Benefits • Weekly pay, • Medical benefits

Great company. Great people. Great opportunities. If you'd like the chance to make your mark with the world's largest equipment rental provider, come build your future with United Rentals! As a Sales Associate on our Fluid Solutions team, you'll embark on a structured training path designed to prepare you for a future role as an Outside Sales Representative. You'll work alongside industry experts who are eager to help you gain hands-on experience with our technical products while developing the relationship-building skills that drive customer success. What you'll do: • Begin your training at a local branch, shadowing both sales and operational roles to gain an inside-out understanding of the full equipment-rental lifecycle., • Join your peers across North America for a digital onboarding class, designed to sharpen your sales technique for success in our industry while providing a collaborative training environment that helps you build and leverage a strong internal support network., • Progress through a series of outbound sales campaigns that provide exposure to different construction verticals, varying customer spend levels, general vs specialty equipment rentals, and both new and existing customer segments., • Master key United Rentals sales tools, including our CRM, inventory management platforms, customer portal, and mobile applications., • Lead high-level sales conversations involving price negotiations, multi-piece rental requests, government and educational collective agreements, equipment service contracts, the sale of used equipment at the end of its rental life, and much more., • Learn proven sales methodologies to deliver solutions for our customers and drive revenue growth., • Participate in local team initiatives such as daily safety huddles, customer appreciation events, equipment yard sale events, customer entertainment outings, charity drives, and 1UR internal team-building workshops., • Track your Sales Development progress through multiple achievement levels, with access to real-time sales performance metrics and weekly peer-ranked competitions., • Receive daily feedback from corporate and local leadership meetings, call coaching sessions, and ride-alongs to local jobsites. You will drive engagement during these meetings by developing sales strategies for your accounts and creating realistic timelines to achieve your goals., • The average Sales Associate spends 4-6 months in the Sales Development Program (SDP) before promotion to an Outside Sales Representative (OSR), with the timeline dependent on market conditions and individual performance., • Other duties as assigned Requirements: • Bachelor's degree or equivalent work experience, • Experience in a customer-facing sales role preferred, • Excellent interpersonal & communication skills, • Strong teamwork and collaboration skills, • Proficient computer and mobile phone/tablet skills, • Valid driver's license with acceptable driving record We don't just "talk the talk!" We're an award-winning company (recently named a Glassdoor Best Place to Work in 2026) that truly cares about our people - That's why we offer best-in-class benefits and perks that will support you and your family. In addition to our health and financial plans, we also offer: • Paid Parental Leave, • Employee Discount Program, • Career Development & Promotional Opportunities, • Additional Vacation Buy Up Program (US Only), • Early Wage Access through Payactiv (US Hourly Only), • Paid Sick Leave, • An inclusive and welcoming ___ Learn more about our full US ___ here. United Rentals, Inc. is an Equal Opportunity Employer and makes employment decisions regardless of race, color, religion, sex, national origin, age, genetic information, citizenship status, veteran status, sexual orientation, gender identity, disability, or any other status protected by law. If you need a reasonable accommodation at any point of the application process, please email for assistance. At United Rentals, we proudly hire active duty members, veterans, reservists, and their families. The values that define your service-leadership, discipline, integrity, and teamwork-are the same values that drive our success. With many veterans already part of our team, we're ready to help you transition into a rewardingcareer. United Rentals consists of a wide variety of roles with different duties and responsibilities. The actual pay rate offered to candidates varies depending upon a wide range of factors including specific position, education, training, experience, skills, and ability. Compensation Range: $32.65 - $48.95

Job DescriptionRole Overview: The CNC Lathe Setup Operator is responsible for setting up CNC machines to ensure efficient production, high-quality output, and safe operations. The primary focus of this role is to achieve an acceptable first piece inspection by properly preparing machines, tooling, and programs. This is a hands-on, technical role requiring strong experience with CNC lathe setups, tooling, and troubleshooting, with the ability to work with minimal supervision in a machine shop environment. Job Requirements: • 5+ years of experience setting up CNC machines (required)., • Strong experience with turning lathes (CNC Lathe experience required)., • Hands-on experience using measurement tools, including calipers, comparators, depth micrometers, and surface finish testers., • Experience with Haas, Mori Seiki, and/or Star CNC machines is a plus., • High school diploma or equivalent required., • Basic English communication skills., • Basic math skills, including measuring and use of calculators., • Familiarity with engineering drawings and machining specifications., • Experience working in a machine shop environment., • Ability to follow detailed written and verbal instructions., • Must have or be willing to obtain a Vernier caliper and eye loupe (personal tools may be approved or purchased through the company).Physical Requirements:, • Frequent lifting up to 25 lbs, with occasional lifting up to 50 lbs., • Regular standing and use of hands for handling tools and machine controls., • Frequent reaching, with occasional walking during the shift., • Visual requirements include close vision, color vision, peripheral vision, depth perception, and focus adjustment.Work Environment:, • Work performed around moving mechanical parts and vibration., • Exposure to machine shop conditions, including oil, metal chips, and cleaning solutions., • Floors may be slippery due to oil or other materials., • Moderate noise level typical of a manufacturing facility., • Work performed in areas where forklifts are in operation., • Handling of bar stock materials from storage racks., • Reasonable accommodations may be made for individuals with disabilitiesKey Responsibilities:, • Set Up CNC Machines: Prepare CNC machines for production by installing tooling, loading programs, and ensuring readiness for operation., • Edit & Load Programs: Create, edit, upload, and download CNC programs as required for each job., • Prepare Tooling & Gages: Lay out and organize all tooling and measurement instruments prior to setup., • Install & Adjust Tooling: Install tools into turret positions, perform tool touch-offs, and update program offsets., • Troubleshoot Equipment: Identify and resolve CNC machine issues to maintain production efficiency., • Support CNC Operators: Provide guidance and assistance to machine operators during production., • Inspect Parts: Perform inspections using comparators, calipers, gauges, eye loupe, and other instruments to ensure quality., • Perform Visual Quality Checks: Inspect for burrs, chatter, surface finish, chamfer issues, and dimensional accuracy., • Verify First Piece: Confirm that parts meet specifications using engineering drawings and first-article samples., • Adjust Machines: Change tools, adjust offsets, and make machine corrections as needed., • Maintain Quality & Safety Standards: Follow all company safety, environmental, and quality procedures., • Communicate Issues: Report problems and recommend process improvements or solutions., • Work Independently: Perform duties with minimal supervision.

Job Description Freedom Plastics Operator's Job Description and Function Form Job Title: Maintenance Operator Position Overview: Maintain extrusion equipment that is used in the production of custom made polyethylene film, and various bag making machines that are used in the production of custom made polyethylene bags. Also, any and all other equipment that is in, on, or part of the building. Essential Job Functions : • Perform preventative maintenance on all equipment., • Make necessary repairs to equipment., • Document all work that is done., • Follow all procedures in place, and your supervisor., • Use: lock out / tag out procedure, whenever working on a piece of equipment., • Maintain clean work areas., • Perform other related duties as assigned. Requirements: • High School Diploma or Equivalent., • Citizenship or proof of residency., • Have at least 2 years experience., • Wear clean and appropriate clothing and shoes., • Wash hands well., • Come to work on time, ready to start at designated time.

Elevate your career at Marotta Controls, a New Jersey Top Workplace three years running! Dedicated to innovation, quality and excellence, we deliver cutting edge control systems for the Aerospace & Defense industry. At Marotta, we value bold thinking and teamwork, and we empower our employees to push boundaries while delivering top-tier solutions to our customers. Our team fosters a fun, collaborative culture where creativity and technical excellence thrive! Your next big opportunity starts here. Be part of a company where your work supports a mission that makes a difference-apply today! Quality Control Inspector III/ CMM Programmer Overview: The Quality Control Inspector/Programmer is responsible for visual and dimensional inspections on manufactured parts, assemblies, and/or sub-assemblies. This role inspects parts to engineering drawings, customer purchase order(s), work orders, industry standards, and specifications. The inspector may report detailed inspection accept / reject information directly to the customer with shipments. Minimum Required Qualifications : • Technical school diploma or equivalent combination of education and experience., • Minimum 5-7 years' experience with Mechanical / Electronic part inspection in a manufacturing or production Environment., • Experience in quality with machined / mechanical parts using GD&T interpretation, able to do programs for automatic inspection with Optical Vision Systems and CMMs. plus. Able to use Profilometers and special Microscopes for visual characteristics with other measuring tools and instruments., • Knowledgeable with AS9102 FAIR (First Article Inspection Report) documentation and Inspection., • Familiar with AQL, sampling methods and traceability., • Strong verbal/written communication skills required for multi-faceted interactions with all levels of personnel within the organization, as well as any and all outside agents, including but not limited to; vendors, suppliers, customers, etc., • Strong computer literacy, with MS Office/PC expertise and demonstrated experience with applicable systems, programs, equipment, etc., • Must be a US Citizen. Essential or Primary / Key Responsibilities : • Train other inspection personnel on CMM software and manual measurement techniques., • Perform Mechanical measurements and visual quality assessments of received items, work-in-progress and finished goods., • Performs 1 st Piece Inspection on machined parts and inspection for product Quality Analysis., • Inspect with thread gages, GO/NO-GO plug gages, V-Blocks, Gage Blocks, height stands, dial indicators, various types of ID/OD micrometers, inspection of thread Pitch Diameter with special gages., • Generate spreadsheets for data collection, evaluate history of product and recommend on Sample Size as per an AQL, • Reconcile final inspection documentation for shipments, • Interact with source inspector as needed and part-take in source inspection duties if necessary., • Read, understand and interpret Mechanical/Electronic drawings., • Approve incoming materials by confirming specifications, conducting visual and physical measurement of the product., rejecting if necessary and processing part thru to the next step., • Approve in-process production by confirming specifications, conducting visual, physical measurement and physical measurement of the product., communicating required adjustments to production supervisor., • Approve finished products by confirming specifications, conducting visual and physical measurement of the product., • Document inspection results by completing reports and logs, summarizing re-work and waste, and inputting data into quality database, • Always verify equipment is operational and calibrated, follow operating instructions and coordinate repairs, • Work with Engineering, Operations, and other sources to resolve issues and meet goals Additional Duties / Responsibilities : • Bring initiatives and activities to closure in a timely manner through effective interaction with individuals, both internal and external to the Marotta organization (as required)., • Maintain and continue to elevate relationships with Business Development, Engineering, Operations, Customer Service and all other facets of the company, • Abide by all safety, quality, housekeeping and company policies/procedures to ensure compliance to various regulatory and internal system requirements, • Contribute to a positive and cooperative work environment through effective communication at all levels internal and external to the organization, • Actively participate in team meetings, improvement initiatives/programs, etc. to provide constructive recommendations and initiate actions to support company initiatives/goals, • Consistently demonstrate commitment to company values, • Keep management informed of area activities and of any significant problems, • Assume responsibility for related duties as required or assigned, • Ensure that work area and work areas of direct reports are clean, secure, and well maintained, • Complete special projects and miscellaneous assignments as required Work Environment : • While performing the duties of this job, the employee can be exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment may be loud., • This job interacts both in a professional office environment and a manufacturing/machine shop environment. This role uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines, as well as environments inclusive of the appropriate eye, hearing and foot protection (as required)., • This is a full-time position. Overtime and weekend work may be required as job duties demand. Physical Requirements : • While performing the duties of this job, the employee is regularly required to talk and hear., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Vision and color vision must pass job-required vision screening, • The employee is occasionally required to sit; climb or balance; and stoop, kneel, or crouch, • \nThe employee may be required to lift and/or move items weighing up to 25 pounds. This position is at our Parsippany, NJ office location. Pay Range: $30.50 - $38.00/hour Many of our contracts require proof that you are a U.S. citizen and/or that an export license has been obtained for employees who are citizens of certain countries. Your employment, both initially and continually thereafter, is conditioned on production of such proof of citizenship and/or any export license that may be required to comply with any and all applicable laws, regulations, or executive orders, or required by Federal, State, or local government contracts. At Marotta Controls, we are committed to a fair, performance-driven compensation approach that promotes consistency across all levels of our organization. We ensure that pay decisions are free from bias, based on objective criteria, and are regularly reviewed. Your level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, experience, and internal consistency. Additionally, we offer a highly competitive compensation package for this opportunity, including incentive compensation and a comprehensive suite of premium benefits. These include medical, prescription, dental, vision, life, and disability insurance, a 401(k) plan with company match, tuition assistance, paid vacation, sick and personal days, paid holidays, and flexible scheduling options such as compressed workweeks. We value and reward employee achievements and host multiple engagement events each quarter to foster a strong, supportive workplace culture. If you are looking to grow or accelerate your career and be part of a best in class organization while enjoying a work-life balance, please visit our website at to learn more about us and to apply. Check out all of our openings at VETERANS ARE ENCOURAGED TO APPLY No agencies, please. Pay Range: $30.50 - $38.00 per hour

Job Description SMT Machine Operator 7:00 am to 3:30 pm, Monday - Friday Effective WE 11/25 - all new starts for Boonton will have a 30% increase to their base pay to cover s compensation package. Please inform the contractor that they will lose their 30% increase at conversion but will gain benefits, including PTO and Holiday pay. Please confirm, thank you! Position Summary: Responsible for setting up and operating printed circuit board assembly machinery utilizing surface mount technology. Expertise is applied to setting up and using the solder paste screen machine, setting up and operating the surface-mount pick-and-place machine, operating and monitoring the reflow oven, and operating inspection machines using Mycronics, Speedline, and CyberOptics machinery. Responsibilities include accurate set up of the machines, proper feeder and magazine population and placement, application and loading of proper programs, monitoring automatic operations, performing first piece and in-process inspections of all manufacturing runs. Use work order package and utilize on-line bar code reporting system for labor and manufacturing quantities. Manage parts inventory and ensure parts accuracy according to job requirement and monitor usage and scrap. Perform routine machine and accessory maintenance and minor repairs. Works in an ISO 9001-2015 manufacturing environment and adheres to safety and operating procedures as applicable. May operate other printed circuit board assembly machines or performs other duties as assigned by the supervisor. Reports to the Production Supervisor. Position Responsibilities: Prepare machines and ensure proper set-up for desired operation. Reference applicable work instructions (WIS) and standard operating procedures (SOP). Observe safety rules for handling solder and machinery. Based on work order, select the required parts and load the feeders or use pre-fed magazines and insert them into the dedicated location on the pick and place machine. Ensure that the parts are lined up properly. Select the applicable machine program and revision number on the computer for the assembly to be populated per work order. Generate layout list showing all components not found or active on the machine but required for the job. Follow the computer screens messages to identify the problem. Change computer flag as necessary, mark the bill of materials with exceptions, check layout again and initiate machine production. Power up and power down the re-flow oven according to standard operating procedures. Monitor the temperature; select the applicable recipe for the assembly in process and monitor the re-flow oven to perform in a manner to ensure that the surface mount components are soldered to the printed circuit board properly. Perform first piece inspection on paste, parts and solder. Log results into inspection database and consult the quality assurance personnel when necessary. Monitor and account for parts inventory, perform basic housekeeping and maintenance of machinery. May operate other manufacturing machinery or perform other small assembly-related assignments as required. Works overtime as required and strives to meet prescribed quality standards in an ISO environment. Skills And Experience Required: High school diploma required. Some advanced education preferred. Must be familiar with the use of personal computers. One year of experience in the setup and operation of the surface mount board assembly machine. Must be able to work with limited supervision and be safety- and quality-conscious. Must be able to communicate and understand directions in English.

Job Summary: Join Mercury and become part of our world-class Quality team that supports the American warfighter on the battlefield, saving lives and defending democracy worldwide. As a quality inspector, you will ensure that our products deliver flawlessly every time, in the heat of battle giving our troops the winning edge when it matters most. You will be utilizing the requirements of IPC Industry Standards to ensure that the quality of our products meets the high demand of our end users. You will ensure optimal product quality by performing in-process visual verification of electronic assemblies, providing real-time feedback to operators, and documenting discrepancies accordingly. Job Responsibilities: \n • Supporting Incoming, in-process and final inspection including customer source inspections\n, • Obtaining and upholding IPC credentials required of the position.\n, • Ensuring quality at a production line level by incorporating spot-inspection, sampling, and 1st-piece verification and 100% inspection as required.\n, • Verifying compliance of in-process material against Customer and Industry Standards\n, • Ensuring documentation is accurately recorded and collected.\n, • Escalating systemic issues to Quality and Manufacturing Engineering\n, • Supporting first-piece verification runs with accompanying documents.\n, • Documenting non-conformities to the process and specifications\n, • Initiating regular quality line-audits to ensure all documentation, consumables, and tooling are within check.\n, • Typically requires 3+ years of experience in quality assurance of electro-mechanical inspection in a manufacturing environment.\n, • Experience using a microscope or optical comparators.\n, • Experience with IPC Industry Standards.\n, • J-STD-001 Class 3 and/or IPC 610 certified\n, • Experience working in an ISO-9001 and/or AS9100 Quality System environment\n, • Operating appropriate inspection equipment; (AOI, XRAY, etc....)\n, • Ability to communicate openly and effectively to provide real-time feedback\n, • Ability to work in a fast-paced team environment\n, • Customer-Focused, "Zero-Defect" Mindset\n, • Documentation Abilities\n, • Computer literacy\n, • Industry-Relevant Quality Inspection or Control experience\n, • Willingness to cross train in multiple Quality areas\n\n #LI-RL1 This position requires you to access information that is subject to U.S. export regulations. You may only access such information if you are a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. government. Why should you join Mercury Systems? Mercury Systems is a technology company that makes the world a safer, more secure place. We push processing power to the tactical edge, making the latest commercial technologies profoundly more accessible for today's most challenging aerospace and defense missions. From silicon to system scale, Mercury enables customers to accelerate innovation and turn data into decision superiority. Headquartered in Andover, Massachusetts, Mercury employs more than 2,300 people in 24 locations worldwide. To learn more, visit mrcy.com Our Culture We are committed to making Mercury a great place to work, no matter where our employees are located. We offer a casual and enjoyable atmosphere that allows employees to learn and grow. We help and care for one another and work as one to achieve results for us and for our customers. We value communication and transparency, and strive to foster two-way dialogue at all levels of the organization. We are committed to lifelong learning, offering comprehensive skills training and tuition reimbursement. Whether you're just starting out on your career journey or you are an experienced professional, it's important to us that you feel recognized and rewarded for your contributions. To find out more about Why Mercury?, or visit the Mercury Community or find answers to general questions at Mercury FAQs Mercury Systems is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex (including pregnancy), sexual orientation, gender identity, national origin, genetic information, creed, citizenship, disability, protected veteran or marital status. As an equal opportunity employer, Mercury Systems is committed to a diverse workforce. In order to ensure reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973, the Vietnam Veterans' Readjustment Act of 1974, and Title I of the Americans with Disabilities Act of 1990, applicants that require accommodation in the job application process may contact the number below for assistance. (978) 256-1300 Click here read about our recent press release.

We want you to help us shape the future of shopping experiences and deliver on our purpose of connecting people with the products and experiences that enrich their lives. Joining Advantage Solutions means joining a network of 65,000 teammates serving 4,000+ brands and retail customers across 40+ countries. All the while, being provided the opportunities, support, and enrichment you need to grow your career. In this part-time, seasonal role you will assemble a variety of products for both indoor and outdoor use. If you are handy with tools and experienced at assembling products like grills and/or furniture, we want to hear from you! We offer a flexible work schedule at your local home improvement store, a competitive pay per piece rate and paid training. What we offer: • A piece rate of $18.00 - $25.00. The more you build the more you make!, • Get paid quicker with early access to earned wages Now, about you: • You are 18 years or older, • Are interested in working on a temporary, part-time basis, • Have a valid driver's license and access to reliable vehicle, • Love to tinker and build stuff, and are experienced in assembling grills, patio furniture etc., • Enjoy working in home improvement stores, • Can stand, kneel, and bend for several hours a day, • Can perform physical work of moving, bending, standing and can lift up to 75 lbs., • Can use your smartphone or tablet to record work after each shift, • Have your own hand tools (cordless drill, basic hand tools, etc.) Join us and see what's possible for you!

Job Description Electromechanical Assembler Our company is seeking a skilled Electromechanical Assembler to Assemble machinery to engineered prints. The ideal candidate will read and understand mechanical, electrical and pneumatic drawings. Operate, maintain, test, troubleshoot, and calibrate electronic equipment so he or she can later fabricate, fit, and assemble products. Ability to follow verbal instructions, work in a fast-paced environment, and the ability to meet deadlines is essential Electromechanical Assembler Duties and Responsibilities • Reading blueprints, drilling bolt holes, assembling parts, inspecting them for imperfections, soldering electrical components, measuring parts, and verifying they are the correct dimensions based on customer specifications using precision measuring tools., • Associate degree in electromechanical engineering, mechatronics, or a field related,, • 2 years of experience using, assembling, or repairing equipment., • Skills in wiring, wire harnessing, crimping, soldering small assemblies and subassemblies, and using various hand tools., • Read blueprints, use measurement tools, and understand electro-static discharge (ESD) handling requirements. We specialize in the specialize in working with the pharmaceutical and food industries.METO Systems designs and manufactures state-of-the-art stainless-steel material handling and processing equipment for a wide range of industrial processing and manufacturing applications since 1969. Whether you are looking to upgrade a single piece of equipment for an existing production line, or are developing a new manufacturing process, our engineering staff can provide expert insights and guidance on product and systems selection.\r\n\r\nWe specialize in the specialize in working with the pharmaceutical and food industries.

Job Description Our Facility is located in Franklin Lakes, NJ all candidates from the surrounding area are welcome to apply. This position will be in person in Franklin Lakes. Our company is seeking a skilled and precise manual Machinist to set up and operate machinery for fabricating, altering, and repairing machine parts, equipment, and tools. The ideal candidate will be able to work well under minimal supervision. You must also understand how to read mechanical blueprints, perform calculations, calibrate and maintain machinery, and make cuts with precision to create products that meet quality standards. We would prefer to hire a candidate that has attended a trade school, but we will accept experience in its place. Machinist Duties and Responsibilities • Use a variety of precision and cutting tools and equipment, such as a drill press, chop saw, lathe, and push and pull broaches, • Cut, shape, and fabricate tools and machine parts, • Read and follow blueprints, • Shearing, rolling, and forming sheet metal, • Ensure all work meets quality standards, instructions, and specifications, • Understand and comply with industry regulations, • Previous experience in machinery or other related fields, • Familiarity machine tools and equipment, • Strong analytical and mathematical skills, • Strong attention to detail, • Sheet Metal experience is a plus, • High school diploma or GED certificate; trade school preferred, • The ability to perform basic math and follow instructions, • Physical fitness and the ability to lift 50 pounds, • Mechanical aptitude to use a variety of industry tools and machinery, • Strong analytical skills, precision, and attention to detailCompany DescriptionMETO Systems designs and manufactures state-of-the-art stainless-steel material handling and processing equipment for a wide range of industrial processing and manufacturing applications since 1969. Whether you are looking to upgrade a single piece of equipment for an existing production line, or are developing a new manufacturing process, our engineering staff can provide expert insights and guidance on product and systems selection. We specialize in the specialize in working with the pharmaceutical and food industries.METO Systems designs and manufactures state-of-the-art stainless-steel material handling and processing equipment for a wide range of industrial processing and manufacturing applications since 1969. Whether you are looking to upgrade a single piece of equipment for an existing production line, or are developing a new manufacturing process, our engineering staff can provide expert insights and guidance on product and systems selection.\r\n\r\nWe specialize in the specialize in working with the pharmaceutical and food industries.

Job Description Job Details Location: 155 Lorraine Ave., Montclair, NJ 07043 Camp Dates: 6/22/2026 (Mon) - 8/28/2026 (Fri) -- (additionally, one weekend to set up, one weekend to breakdown, and an orientation date) Camp Hours: 8:00 am - 6:00 pm (actual shifts will vary) Hourly Wage: The hourly rate for this position is $18.75 - $21.75 per hour. The pay range listed here is what Steve & Kate's Camp in good faith anticipates offering for this job opening. Actual compensation offers within this range will depend on experience and other relevant business or organizational factors. At Steve & Kate's, we put radical trust in kids so that they learn to trust themselves. Campers choose minute-to-minute how to spend their time because making decisions today helps to build the self-confidence they’ll need to wrangle unknowns tomorrow. We value empowering our staff to be their whole authentic selves because everyone in our community needs to feel included! Sound like something you can get behind? If so, we're looking for team members who are motivated babysitters, teachers, coaches, students, athletes, artists, and anyone ready to play hard and be goofy. As a Steve & Kate’s staff member, you’ll sharpen your inherent leadership skills, learn some new ones, and collaborate with interesting people, all while immersing yourself in creativity and play. Job Responsibilities The only small piece of this job is the size of your campers’ shoes. Our youngest campers (ages 4-5) are free to take on camp with self-direction like our older campers, but that doesn’t mean they don’t need some extra TLC. As the youngest campers' lead counselor, you’ll utilize resources provided by S&K to implement and manage the structure of the camp day, manage a team of support staff, and generally make sure that we are meeting all the baseline needs of our little ones. Additional Responsibilities • Do you appreciate and agree with our self-directed approach for kids?, • Would sparking up conversations with staff, campers and parents fit in your comfort zone? If it is out of your comfort zone are you willing to grow in this area?, • Are you a self-starter excited at the idea of taking ownership of your own mini-program?, • Are you comfortable navigating challenging and sometimes sensitive interactions?, • Are you the type of person who can’t rest until you’ve done everything possible to make someone feel cared for? Like, if someone you knew was in need, would you do more than send them a “thinking of you” text?, • Are you calm under pressure and able to calm those around you?, • Do you have the stamina to keep up (literally) with 4-12 yr. olds bursting with energy and creative potential? And, if needed, can you bench press the equivalent of a kindergartner (just kidding --- can you lift up to 40 pounds)? Job Requirements • At least 18 years of age, • Minimum of 2 months experience working with camp–age children, with 1 year preferred, in either a professional, personal or volunteer setting., • First Aid & CPR certified prior to Day 1 of Camp (some locations may require additional certifications), • By applying and accepting an offer, you are giving Steve & Kate's permission to email or text you. Steve & Kate's Camp and Bright Horizons comply with all laws that require reasonable accommodations for qualifying disabilities and/or pregnancy-related limitations. The full set of physical requirements for this role are as follows: • Maintain and follow all safety and health rules of the location., • Organize and maintain clean and accessible activity spaces., • Assist in camp set-up and breakdown during move-in and out weekends., • Stand for long periods while supervising children and facilitating activities., • Participate in athletic games.Benefits: rcog7WqVai

Job Description Join Cartridge Actuated Devices as a Full-Time Quality NDT Inspector Level II/III and immerse yourself in a dynamic manufacturing environment located in Fairfield, NJ. This onsite position offers an opportunity to apply your skills in non-destructive testing while collaborating with a team dedicated to excellence and innovation. You will play a crucial role in ensuring product integrity, contributing to projects that impact various industries. The competitive salary ranges from $60,000 to $80,000 per year, reflecting your expertise and commitment to quality assurance. This is more than a job; it's an opportunity to grow professionally in a supportive atmosphere where your contributions are valued. You will be offered great benefits such as Medical, Dental, Vision, 401(k), Life Insurance, Competitive Salary, and Paid Time Off. Take the next step in your career and make a significant impact on our operations. Cartridge Actuated Devices: Our Mission Our focus is to deliver world-class solutions to our customers, on time and of the highest quality as the preferred supplier of highly engineered, energetic, and pyrotechnic devices while developing our associates and maximizing long-term value for our shareholders through organic growth and targeted acquisitions. What would you do as a Quality NDT Inspector Level II/III As a new Quality NDT Inspector Level II/III at Cartridge Actuated Devices, you can expect a structured and engaging workday focused on maintaining our high standards of quality. Your daily responsibilities will include performing non-destructive tests, interpreting results, and documenting findings in compliance with industry standards. You will conduct inspections on various materials and components, utilizing equipment such as ultrasonic, magnetic particle, and dye penetrant testing techniques. Collaboration with engineering and production teams will be essential, as you'll provide feedback on quality issues and assist in troubleshooting. Your work schedule will be Monday through Thursday, from 7:00 AM to 5:30 PM, allowing for a long weekend while contributing significantly to our production efforts. Daily tasks may also involve participating in team meetings to discuss quality objectives and performance metrics. Does this sound like you? To excel as a Quality NDT Inspector Level II/III at Cartridge Actuated Devices, several key skills are essential. A strong foundation in non-destructive testing techniques is crucial, along with a keen eye for detail and precision to accurately assess the integrity of materials and components. Critical thinking and problem-solving abilities will enable you to interpret test results effectively and make informed decisions regarding quality control. Strong communication skills are also vital, as you will collaborate closely with engineering and production teams to address quality issues and improve processes. Additionally, an understanding of industry standards and regulations will ensure compliance and enhance your effectiveness in the role. Adaptability and a commitment to continuous learning will further support your development, allowing you to stay abreast of advancements in the field. A proactive approach to quality assurance will be instrumental in contributing to the overall success of our manufacturing operations. Make your move If you think this role will suit your needs, great! Applying is a piece of cake. Good luck - we're excited to meet you! Employment with Cartridge Actuated Devices is contingent upon the successful completion of a background investigation, including any required Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) screening, and drug screening, as permitted by applicable law. The background investigation may include verification of employment history, education, criminal records, ATF-mandated checks, and other relevant information to determine suitability for employment. The drug screening will be conducted in accordance with state and federal regulations. Failure to successfully pass the background check, ATF screening, or drug screening, or the provision of false or misleading information during the application process, may result in withdrawal of a job offer or termination of employment. By proceeding with the application process, you acknowledge and consent to the background, ATF, and drug screening requirements as described above.

Job Description Job Title: R&D Formulation Scientist – Tablets, and Powders (Nutraceutical) Top Must Have: Need to come from the Nutraceutical industry, working with vitamins and dietary supplements! Job Description The R&D Formulation Scientist – develops and optimizes formulations for nutraceutical products across multiple dosage forms, including, oils, waters, soft gels, powders, and granulations. This role partners closely with Sales, Customers, Sourcing, and Purchasing to translate product requirements into robust, scalable formulations while ensuring material availability and cost efficiency. The scientist performs hands-on work in the product development laboratory, utilizes advanced analytical instrumentation, and troubleshoots technical issues to support high-quality, sustainable products that promote health and wellness. This position offers significant growth potential as the R&D function expands and provides opportunities to move into leadership and people management over time. Responsibilities • Partner closely with Sales and Customers to understand product requirements and technical needs and translate them into effective formulation strategies., • Develop and optimize formulations for oils, waters, soft gels, two-piece capsules, tablets, powders, and granulations within the nutraceutical and dietary supplement space., • Apply expertise in powder, liquid, and tablet formulations to create stable, manufacturable, and high-quality products., • Collaborate with Sourcing and Purchasing teams to ensure timely material availability, cost efficiency, and appropriate raw material selection., • Troubleshoot technical formulation issues, identify root causes, and implement effective, data-driven solutions., • Assist with analytical testing and quality assessments to ensure products meet specifications and regulatory and internal quality standards., • Perform hands-on experimental work in the Product Development laboratory, including batching, blending, encapsulation, and related lab-scale processes., • Utilize analytical instrumentation such as gas chromatography (GC), high-performance liquid chromatography (HPLC), and inductively coupled plasma mass spectrometry (ICP-MS) to support formulation development and analytical chemistry needs., • Support quality control activities by evaluating raw materials, intermediates, and finished products, including those involving fish oils and other nutraceutical ingredients., • Evaluate laboratory capabilities, identify opportunities for future R&D expansion, and recommend new technologies, methods, or equipment to enhance innovation., • Contribute to new product development projects from concept through commercialization, including experimental design, data analysis, and documentation., • Collaborate effectively with a predominantly Spanish-speaking laboratory team, using translation tools as needed to maintain clear communication and teamwork., • Maintain accurate records of experiments, methods, and results in accordance with internal procedures and good laboratory practices., • Work cross-functionally with Quality, Manufacturing, and other internal stakeholders to ensure formulations are scalable and suitable for production., • Bachelor’s degree in Food Science, Chemistry, or a related field., • 3+ years of R&D formulation experience, preferably in nutraceuticals or dietary supplements., • Proven expertise in formulation of powders, liquids, and tablets., • Bilingual skills, particularly Spanish, are a plus but not required., • Interest in purpose-driven work focused on high-quality, ethically sourced, and sustainable products. 401K, holiday, vacation and sick time offered to internal employees. Will have potential to grow into a leadership role - the R&D department is new and there will be room to expand to R&D formulators that report to them. Workplace Type This is a fully onsite position in Clifton,NJ. Application Deadline This position is anticipated to close on May 14, 2026. Diversity, Equity & Inclusion At Actalent, diversity and inclusion are a bridge towards the equity and success of our people. DE&I is embedded into our culture through: • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job Description The Inside Sales Representative plays a critical role in supporting sales and customer service operations by preparing accurate and timely customer quotations, providing pricing and lead time information, and coordinating closely with internal teams. This role ensures a seamless customer experience from initial inquiry through order placement and execution, while maintaining a high level of accuracy, responsiveness, and professionalism. Responsibilities not limited to: • Prepare accurate and detailed customer quotations for products and services, • Provide pricing, lead times, and product availability based on production schedules and supplier input, • Review customer requirements, specifications, and technical documentation to ensure appropriate quoting solutions, • Collaborate with operations, engineering, and production teams to confirm capabilities, feasibility, and scheduling, • Follow up on outstanding quotes to drive order conversion and maintain customer engagement, • Enter and process customer orders accurately in ERP/CRM systems, ensuring alignment with quoted terms and conditions, • Communicate proactively with customers and internal stakeholders regarding order status, updates, and delivery timelines, • Maintain organized records of quotations, revisions, approvals, and customer communications, • 2+ years of experience in customer service, inside sales, quoting, or order management, • Experience with technical, engineered, or manufacturing products strongly preferred, • Strong attention to detail with the ability to interpret specifications and technical requirements, • Excellent written and verbal communication skills, • Ability to manage multiple priorities in a fast-paced environment, • Customer-focused mindset with urgency and responsiveness, • Strong organizational and problem-solving abilities, • Cross-functional collaboration (sales, operations, engineering, production), • Accuracy and accountability in pricing, quoting, and order entry, • Proactive follow-through and ownership of assigned workCompany DescriptionFor over 10 decades, VMC Group has been recognized as a world leader in the design and manufacture of vibration isolation, seismic control and shock protection products. Our comprehensive product and engineering solutions cover a variety of industries – commercial construction, industrial/vehicular, OEM and military/aerospace. Our full range of spring, elastomeric architectural mounts, wire rope isolators, curbs and bases are proven to meet and exceed specifications for any seismic, non-seismic, shock, or even bomb blast application. VMC Group’s project managers and engineers are best known for working closely with our customers to exceed their expectations in the design, development and manufacturing of solutions for a specific application need. Whether the challenge is to solve a vibration isolation issue for a new piece of equipment or manage a seismic energy spec for a building structure, your VMC team works closely with your project group to engineer solutions to ensure years of superior resilience and isolation integrity. We call this philosophical approach The Power of TogetherTM, and it defines the partnering relationship you can expect when you work with our firm. We are In It With You. That’s why our company and each of our brands have emerged as and continue to be world leaders. The VMC Group is proud to be an Affirmative Action/Equal Opportunity Employer/Disability/Veteran. The VMC Group maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks.For over 10 decades, VMC Group has been recognized as a world leader in the design and manufacture of vibration isolation, seismic control and shock protection products.\r\n\r\nOur comprehensive product and engineering solutions cover a variety of industries – commercial construction, industrial/vehicular, OEM and military/aerospace. Our full range of spring, elastomeric architectural mounts, wire rope isolators, curbs and bases are proven to meet and exceed specifications for any seismic, non-seismic, shock, or even bomb blast application.\r\n\r\nVMC Group’s project managers and engineers are best known for working closely with our customers to exceed their expectations in the design, development and manufacturing of solutions for a specific application need. Whether the challenge is to solve a vibration isolation issue for a new piece of equipment or manage a seismic energy spec for a building structure, your VMC team works closely with your project group to engineer solutions to ensure years of superior resilience and isolation integrity.\r\n\r\nWe call this philosophical approach The Power of TogetherTM, and it defines the partnering relationship you can expect when you work with our firm. We are In It With You. That’s why our company and each of our brands have emerged as and continue to be world leaders.\r\n\r\nThe VMC Group is proud to be an Affirmative Action/Equal Opportunity Employer/Disability/Veteran. The VMC Group maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks.

Job DescriptionIT Manager IT Manager - Precision Manufacturing About the role We're a precision manufacturing company serving aerospace and defense customers, and we're looking for a hands-on IT Manager to own our technology environment end-to-end. This is not a remote or hybrid role - you'll be on the production floor and in the office every day, keeping the systems and hardware that run our operation in peak condition. What you'll actually do • Maintain and troubleshoot all hardware - workstations, laptops, printers, barcode readers, tablets, and production floor devices, • Manage and push updates to our Epicor ERP system and all endpoints across the facility, • Support our Windows and Linux environments and cloud infrastructure on Azure and AWS, • Lead and mentor one junior IT team member handling day-to-day helpdesk, • Coordinate with our third-party cybersecurity and network provider when issues arise, • Keep IT documentation, software licenses, and vendor relationships organized What we're looking for: The right person is a strong generalist - someone who can walk into a manufacturing environment, quickly diagnose what's wrong with a piece of hardware or an ERP update, and get things running again. You don't need to be a cybersecurity expert. You do need to be unflappable and self-directed. • Solid experience with hardware maintenance and troubleshooting (printers, scanners, desktops, laptops), • Hands-on experience with Epicor ERP - this is our primary system, • Comfortable in both Windows and Linux environments, • Familiar with Azure and/or AWS, • Prior experience working in a manufacturing or industrial environment, • NIST background or familiarity with government compliance frameworks is a plus Nice to have • Experience in a NADCAP- or AS9100-certified environment, • Background at an aerospace or defense manufacturer, • Exposure to CMMC or ITAR requirements Compensation Base salary: $130,000 - $150,000 Benefits • Health, dental, and vision insurance, • 401k with company match, • Paid time off, • Paid holidays - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 05/11/2026 and applications will be accepted on an ongoing basis until the position is filled or closed.Everforth CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. Everforth CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. Everforth CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description DISCLAIMER Job descriptions are not meant to be all-inclusive, and the job itself is subject to change. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Summary The Care Coordinator serves as the main point of contact for facilities and physicians participating in the High Needs REACH program. This role blends care transition functions with provider consulting responsibilities to ensure patients experience seamless care coordination, facilities achieve measurable performance improvement, and providers are engaged with data-driven insights. The Care Coordinator will work closely with post-acute facilities, physicians, patients, and internal PBACO teams to reduce readmissions, improve quality, and strengthen participant satisfaction. This position requires strong communication skills, the ability to share and interpret data with stakeholders, and the clinical knowledge to support patients navigating their Medicare benefits. The role requires travel up to two times per month, including overnight stays, to meet with facilities and providers. Essential Duties and Responsibilities Care Coordination • Monitor ADTs (admission, discharge, transfer feeds) to identify outlier information that may impact patient outcomes., • Alert facilities or participating providers when relevant findings are identified., • Encourage communication between facilities and participating providers to support collaborative decision-making., • Serve as the primary liaison for High Needs REACH facilities and participating providers., • Conduct monthly facility performance review meetings, presenting data and opportunities for improvement with measurable action items., • Educate facility staff and providers on REACH program requirements, PBACO policies, and care coordination best practices., • Share facility- and provider-level data with stakeholders, highlighting opportunities for improvement., • Monitor and report on performance metrics such as readmissions, length of stay, transition timeliness, and patient satisfaction., • Document all patient, provider, and facility interactions in designated platforms with 100% compliance., • Collaborate with internal PBACO teams (Data Analytics, Clinical Action Team, Population Health) to align care coordination with organizational goals., • Identify facility-level trends or barriers impacting patient outcomes and escalate as needed. Care Coordination & Outcomes • ≥ 90% of patient transitions completed with documented PCP follow-up., • ≥ 85% patient satisfaction with outreach., • 100% of assigned facilities have monthly performance review meetings documented with measurable improvement goals., • ≥ 80% of participating facilities demonstrate improvement in at least one tracked metric (LOS, readmissions, or timeliness)., • ≥ 98% accuracy in documentation and reporting of patient transitions and facility metrics., • 100% of reports and meeting documentation completed within 48 hours of interaction., • Clinical Knowledge: Understanding of Medicare benefits, transitions of care, and post-acute continuum (SNF, HHA, rehab)., • Communication: Strong written/verbal skills for engaging patients, providers, and facility staff., • Data Interpretation & Analytics: Strong Excel and analytic skills; ability to synthesize and piece together data from multiple sources to create actionable opportunities tailored to different audiences., • Relationship Building: Develops trust with physicians, facility leaders, and patients., • Problem-Solving: Identifies barriers to care and develops creative, patient-centered solutions., • Education: Bachelor’s degree in Healthcare, Nursing, or Administration required; Master’s degree in a relevant subject preferred., • Experience: ≥ 2 years in SNF, HHA, care management, or provider relations., • Preferred: Prior ACO or value-based care experience, familiarity with High Needs populations., • Technical Skills: Strong Excel and data analytic skills required; proficiency in Microsoft Office; familiarity with care coordination platforms (e.g., CarePort, Epic, or similar)., • Combination of office-based work, facility visits, and occasional patient interaction., • May work at a computer for prolonged periods., • This is not a supervisory role. Travel & Field Engagement RequirementsThis role includes a significant in-person component. Approximately 50% of the position involves local travel to Skilled Nursing Facilities and other post-acute care settings to build relationships, support network growth, and establish ongoing meeting cadence with partner facilities.Candidates must be comfortable with frequent travel, have reliable personal transportation, and be willing to conduct regular on-site visits. Travel expenses will be reimbursed.Regional ExpectationsNJ/NY Role Candidates may be based in either New Jersey or New York. The role requires active relationship-building with post-acute care facilities across the following counties: • New York: Suffolk, Nassau, and New York counties, • New Jersey: Morris, Cape May, Mercer, and Atlantic countiesResiding in or near these counties is strongly preferred. Quarterly in-person meetings are expected within these regions.

Senior Specialist, Trade Compliance. The L3Harris Trade Compliance department is an important piece of the international business segment. Candidates must be able to work effectively with a cross-functional team to effectively keep L3Harris in compliance with the regulations while also helping to fo

Job Description ✨ Join the Lovisa Team – Where Fashion and Fun Come Together! ✨ Ready to dive into the world of super stylish jewellery that doesn’t break the bank? Lovisa is the ultimate go-to destination for trendy, affordable jewellery, and we’re growing fast – and we want YOU to be part of it! If you’re passionate about fashion, love the idea of working in a fun, high-energy team, and want to develop your skills while helping others shine, this is your dream job. What’s In It for You: • Endless Growth: We’re constantly expanding (hello, global opportunities!), and we want you to grow with us! Whether it’s leveling up within your local store or taking on an international role, the possibilities are endless., • Fashion Perks: Get discounts on our fabulous jewellery, plus access to global competitions with amazing prizes – because we love rewarding our team., • Training & Skills: Not only will you get hands-on experience in retail, but we’ll train you to become an expert in everything from customer service to piercing (yep, we teach you how to do that too!)., • A Team That Gets It: Work with a group of fun, energetic people who love what they do and always have each other's backs. Your team is your support system, and together, you'll crush it! What We’re Looking For: If you're obsessed with fashion and love helping others express their unique style, then we’re all in! We want someone who thrives in fast-paced environments, enjoys delivering amazing customer experiences, and is ready to bring that positive, can-do energy every day. • Fashion Enthusiast: You get excited about helping people find the perfect piece of jewelry to level up their look. You’re on top of the trends and always ready to style up any outfit., • Go-Getter: You’ve got that hustle – you’re proactive, motivated, and always find a way to get things done. You bring the energy!, • Team Player: You love being part of a squad that’s always supporting each other and working together to hit goals (and have fun while doing it!)., • Customer-Focused: You know that delivering an incredible customer experience is EVERYTHING. Every customer is unique, and you’re ready to help them shine! The Role: As a Part-Time Team Member at Lovisa, you’ll play a key role in creating unforgettable experiences for our customers! You'll be: • Providing next-level customer service that makes people feel amazing, • Helping customers find that perfect jewelry piece (the one they won’t stop wearing), • Keeping the store looking fresh, organised, and picture-perfect at all times, • Learning how to pierce (training provided!) and making sure customers leave with a smile, • Having fun in a high-energy environment where every day is a new adventure How to Apply: We’re not asking for a CV – just a 1-minute video that answers these 3 simple questions: • What excites you about joining Lovisa?, • What does the phrase “It’s about the customer, always” mean to you? Why Lovisa? We’re all about diversity, creativity, and building a team that represents the world around us. Whether you're from across the street or across the globe, we celebrate your uniqueness and know it’s what makes our team so awesome. Ready to join a global brand that’s growing fast and all about making the world a more stylish place? Apply now and start your Lovisa journey – we can’t wait to meet you! ????

Job Description Join Us Today: If you are seeking a rewarding career with industry-leading benefits, professional growth opportunities, and a culture that values its people, we invite you to apply today. At FDE, we are committed to supporting our Team Members in becoming their best selves. This commitment is reflected in our competitive compensation, benefits, and development programs, as well as our vision of being the employer of choice in every community we serve. Join a team honored by Furniture Today as one of the Best Places to Work in Furniture for 2025. About Us Factory Direct Enterprises LLC is a leading licensee of Ashley, the number one selling furniture brand in the world and the top retailer of furniture and bedding in the United States. Compensation and Benefits We offer one of the most competitive compensation packages in the furniture industry: • Commission-based salary ranging from $40,000 to $90,000 per year, based on performance, • Annual bonus structure tied to individual performance and company success, • Weekly commission and bonus opportunities on written sales, • Presidents and Premier Programs that offer additional weekly bonus incentives, • Paid, comprehensive two-week training through the Ashley Sales Academy, • 401(k) retirement plan with company match, • Paid time off, holiday pay, and your birthday off, • Medical, dental, and vision insurance starting as low as $25 per week, • Employee discounts on furniture and accessories, • Referral bonuses up to $1,000 for recommending successful candidates Our Culture and Team Member Programs: FDE maintains a culture of recognition, service, and growth. We actively invest in the well-being of our team and welcome employee feedback through programs like Peakon Surveys. Our Ashley Cares initiatives support our employees and communities, including: • Hope to Dream: A portion of mattress sales funds beds for children in need, • Give a Day: Paid volunteer day annually with an approved non-profit organization, • Corporate Chaplains: Confidential support for personal challenges such as grief, family needs, and stress, • Life Resources: Quarterly educational events focusing on financial literacy, health, and wellness, • Team Member Relief Fund: Financial assistance during unexpected life events, • SmartDollar: A free financial wellness platform to help manage budgets and plan for the future Position Overview: Home Furnishings Advisor The Home Furnishings Advisor is responsible for delivering a unique and personalized guest experience. You will act as a representative of our brand, guiding customers through their home furnishing journey. As a subject matter expert, you will leverage your product knowledge and customer service skills to drive sales and ensure customer satisfaction. Key Responsibilities: Sales and Customer Experience • Sell a wide range of Ashley home furnishings, accessories, and warranties using the Ashley Sales Approach, • Welcome and engage with every guest professionally and attentively, • Deliver compelling product presentations and offer complete solutions including protection plans and financing, • Build and maintain customer relationships through proactive communication during and after the sales process Post-Sales Administration • Accurately complete post-sale documentation and ensure order details meet customer expectations, • Provide all necessary paperwork to the Customer Service Department, • Enter accurate customer information into the UPs system, including contact details for future follow-up, • Record advertising efforts and maintain a lead database using customer information forms Showroom Presentation • Support store appearance through regular floor recovery and adherence to safety and cleanliness standards, • Ensure every customer has a professional and welcoming in-store experience Professional Development • Use company-provided tools and training to enhance sales performance, • Stay informed about product updates and company initiatives, • Participate in sales meetings, training sessions, and one-on-one coaching Performance Expectations: You will be evaluated on a variety of key performance indicators including: • Total sales volume and sales per guest, • Bedding sales, close rate, protection plan sales, and average transaction value, • Number of credit applications submitted, • Net gross margin and guest satisfaction (Net Promoter Score), • Total Piece Exception Rate and related inventory accuracy metrics Additional Duties: • Assist with cashiering or merchandise tasks as needed, • Participate in inventory and other operational processes, • Travel to other store locations for training or meetings as required Schedule Requirements: • Must be available to work at least 40 hours per week, including weekends, • Additional hours may be required during holiday or peak seasons, • Regular attendance at the assigned store is required, • Two days off per week are scheduled except during holiday periods Qualifications: • Highly motivated with a positive attitude and strong interpersonal skills, • Previous sales experience is helpful but not required, • Comfortable in a performance-driven, customer-focused retail environment, • Strong attention to detail and commitment to delivering exceptional service Job Type: Full-time Benefits: Health insurance, dental insurance, vision insurance, life insurance, paid time off, 401(k) with employer match, employee discount