Piece work jobs in Rochester, New YorkCreate job alerts

Job DescriptionDescription: General Job Summary: In addition to performing laser operation, ensures jobs are set-up to meet MPCD/customer requirements. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Understands and follows all applicable safety policies and procedures., • With Manufacturing Supervisor, schedule daily/weekly workload., • Download part program into machine controller., • Ability to perform adjustments of the tube laser to remedy slag, burn through, burrs, and un-desirable conditions., • Utilizes hand instruments (micrometers, calipers, height gage) to perform first piece/blue tag inspections., • Obtains inspection approval for each job., • Works with Engineering to resolve problems and production issues., • Train new Associates on equipment operation, department processes and procedures., • Ability to troubleshoot and resolve basic errors with the operation of the tube laser., • May be required to work/assist Maintenance with issues outside of basic errors/issues., • Ability to successfully load material and record production in Plex. Supervisory Responsibilities: None Requirements: Education High school diploma or general education degree (GED); One year certificate from college or technical school preferred or equivalent combination of education and experience. Experience 2-3 years related experience or training Computer Skills: None Other Requirements: Ability to use quality measurement devices such as micrometer, verniers, calipers height gauges. Language Skills: Intermediate Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or Associates of organization. Mathematical Skills: Basic Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Intermediate Skills: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to stand; walk; sit; maneuver through the office and factory; use hands to finger, handle, or feel; reach with hands and arms; grasping and twisting; talk or hear; lift and/or move equipment/product weighing up to 50 pounds. Work with another associate to lift anything greater than 50lbs. Work Environment: The work environment characteristics described here are representative of those an Associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the Associate is regularly exposed to extreme heat; extreme cold; wet and/or humid conditions. While performing the duties of this job the noise level in the work environment is usually loud. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change at any time with or without notice.

Job DescriptionJob Title: Tube Laser Operator Location: East Rochester, NY Job Type: Full-Time | Direct HireSchedule: 1st shift 6am - 2:30pmPay: $21-$27/hr. DOE We’re looking for a skilled and detail-oriented Tube Laser Operator to join a growing manufacturing team in East Rochester, NY. This is a full-time, direct hire opportunity where your expertise will be valued, your voice will be heard, and your impact will be seen on the production floor every day. If you have experience with tube laser equipment and take pride in producing high-quality work, this is your chance to step into a stable, long-term role with real growth potential. What You’ll Do • Set up and operate tube laser machinery to meet production and quality standards, • Download and manage part programs within the machine controller, • Adjust machine settings to correct issues such as slag, burrs, or burn-through, • Perform first-piece and in-process inspections using precision tools (micrometers, calipers, height gauges), • Ensure all jobs meet internal and customer quality requirements, • Collaborate with Engineering and Production teams to resolve issues and improve processes, • Troubleshoot basic machine errors and assist with more advanced issues as needed, • Load raw materials and accurately record production data in Plex system, • Help train and mentor new team members on equipment and procedures, • Follow all safety policies and maintain a clean, organized work environmentWhat You Bring, • High school diploma or GED required, • 2–3 years of experience operating tube lasers or similar CNC equipment, • Technical certificate or trade school training preferred, • Strong understanding of fabrication processes and quality inspection methods, • Experience using precision measurement tools (micrometers, calipers, etc.), • Ability to read and interpret blueprints, work instructions, and technical documents, • Solid math and problem-solving skills, • Mechanical aptitude and troubleshooting abilityWork Environment & Physical Requirements, • Manufacturing floor environment with exposure to heat, cold, humidity, and loud noise, • Frequent standing, walking, bending, and use of hands for machine operation, • Ability to lift up to 50 lbs independently; team lift required for heavier itemsWhy This Opportunity Stands Out, • Direct hire with long-term stability, • Opportunity to grow your skills in a precision manufacturing environment, • Work alongside a collaborative and experienced team, • Be part of a company that values quality, safety, and continuous improvementApply TodayIf you’re ready to bring your experience to a team that values craftsmanship and precision, we want to hear from you. Apply now and take the next step in your manufacturing career. #PRTI

Job Description Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning QS:9000, ISO:9002, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol-free working environment. General Job Description: Sets up and operates horizontal and vertical CNC mills. Requires only general supervision. Minimum Qualifications: • Job knowledge through suitable education or prior work experience, • Able to read blueprints, • 4th axis experience, • Programming a must, • Know correct speeds and feeds, tooling, design and manufacturing of fixtures Specific Duties: • Program and Set up horizontal & vertical CNC mills, • Make proper set-up to give rigidity to work piece, • Work with materials such as cast iron, steel, bronze, brass and other non-ferrous materials, • Hold tolerance of .003 inch, • Manufacture and inspect blueprint, • Upkeep daily preventative maintenance log Physical Demands: • Must be able to lift up to 50 lbs. regularly, • Requires frequent bending, stooping, squatting, pushing and pulling of parts and part containers, • May be required to stand for long periods of time, • May involve some repetitive motions, • Due to the open environment of the warehouse, must be able to work in various weather and temperature conditions to include extreme heat, humidity and cold This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary. Benefits • 401(K), • Health Insurance, • Paid time off, • Vision Insurance, • Dental Insurance, • Life Insurance

American Traveler is seeking a travel Registered Respiratory Therapist for a travel job in Rochester, New York. Job Description & Requirements • Specialty: Registered Respiratory Therapist, • Discipline: Allied Health Professional, • Start Date: 06/29/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights, • Employment Type: Travel Assignment Overview • Shift: Nights, 3x12hrs, • Hours: 36 hrs/wk, • Start Date: Jun 29, 2026, • Length: 13 weeks, • Openings: 1Description American Traveler is seeking a Registered Respiratory Therapist (RRT) with at least 1 year of experience for a 13-week night shift contract in an adult critical care setting, with proficiency in Epic and hands-on ventilator management skills. Details • 13-week travel contract, • Night shift schedule, 3x12-hour shifts (19:00–07:30), • 4 rotating weekend shifts per month, • On-call required, • Adult critical care and emergency department setting, • Patient diagnoses include CHF, COPD, pneumonia, respiratory failure, and respiratory infections, • Specialized procedures include ABG sampling, ventilator management, patient assessment, medication administration, and pulmonary hygiene, • Equipment includes Hamilton Vent, Servo-U, NKV330, and V60 ventilators, • Epic EMR preferred, • Candidates living within 50 miles of the facility are eligible as local candidatesRequirements, • Active RRT credential required, • BLS certification required, • Active state license required if applicable, • Minimum 1 year of respiratory therapy experience, • Proficiency in Epic EMR, • Experience with adult critical care and emergency department settings, • Skills required: extubation, intubation assist, nasal/oral airway placement and suctioning, sputum specimen collection, ETT/NT suctioning, tracheostomy care and management, bag-mask ventilation, HFNC, BiPAP, CPAP, T-piece, trach collar, troubleshooting high-pressure alarms, weaning from mechanical ventilation, and long-term care, • 2 professional references from a supervisor within the past 2 years, • Full 7-year work history with all gaps explainedAdditional Information, • First-time travelers are accepted for this position, • Any time off or scheduling requests must be submitted at the time of initial consideration, • Call-off policy allows up to 3 shifts per 13-week assignment; shifts placed on-call in lieu of being called off count toward this total American Traveler Job ID #P-716292. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Travel Respiratory Therapist - Registered RT/RRT About American Traveler With over 25 years of experience, American Traveler has established a reputation for outstanding customer service. Our team ensures a smooth, worry-free experience for those starting on or expanding their travel nursing and allied careers. With thousands of travel nursing and allied jobs nationwide, our attentive and approachable recruiters find positions that align perfectly with your career aspirations and personal requirements. American Traveler offers exceptional benefits, including premium medical, dental, vision and life insurance beginning day one of your assignment, generous 401(k) match, substantial housing stipends, and more. Additionally, with 24/7 support and access to our in-house clinicians, you are assured confidence and comfort throughout your assignment. With our team behind you, you can relax and enjoy a rewarding travel career.

Job Description Role Description - Warehouse / Equipment Maintenance Coordinator Reports To: General Superintendent The Warehouse/Equipment Maintenance Coordinator is responsible for organizing, maintaining, and managing the logistics of company-owned tools, equipment, and job site materials. The ideal candidate takes pride in keeping things running smoothly, ensuring that all equipment is inventoried correctly, serviced, and readily available when and where it's needed. This hands-on role plays a key part in the success of our project teams. Key Responsibilities: · Inventory Management: o Maintain organized storage of all equipment, tools, parts, and jobsite supplies. o Keep inventory tracking logs accurate and up to date. o Ensure proper handling, storage, and security of materials both in the warehouse and at job sites. o Maintain and update a list of miscellaneous building hardware; distribute to project managers and site superintendents monthly. o Fulfill hardware requests by pulling and delivering parts to job sites, updating inventory logs accordingly. · Equipment Transport: o Pick up and deliver company-owned equipment between storage facilities and job sites as needed. o Ensure safe and secure transportation and set up of equipment and supplies. · Maintenance & Repairs: o Perform routine preventive maintenance (PM) on all company-owned equipment, including but not limited to: § Oil changes § Greasing equipment § Cleaning condenser coils on commercial dehumidifiers § Replacing belts, capacitors, and switches on commercial air movers (fans) o Maintain a detailed maintenance and repair log for each piece of equipment, tracking: § Preventive maintenance schedules and procedures § Dates and descriptions of work performed § Equipment location at time of maintenance (jobsite, warehouse, or repair shop) § Equipment readiness for job site use o Coordinate with outside repair centers for major repairs beyond in-house capabilities. Skills and Qualifications · Strong mechanical aptitude and troubleshooting skills · Intermediate knowledge of: o Gasoline and diesel engine systems o Basic equipment for electrical repairs (e.g., switches, capacitors) o Equipment plumbing (e.g., check valves, condensate pumps) · Ability to lift and move 70+ lbs. as needed · Comfortable working in remote or outdoor job site environments with limited access to utilities · Ability to work independently and follow through on assigned tasks without constant supervision · Strong organizational skills and attention to detail · Additional Requirements: o Valid driver’s license o Personal pickup truck or equivalent vehicle capable of hauling equipment; includes a truck allowance and fuel card o Responsible for supplying own hand tools; Christa will assess and provide any specialty tools as necessary · OSHA 10 certification required at time of hire · Work Environment: o Field-based travel throughout the central, northern, southern tier, and western NY o Fast-paced and dynamic work environment; candidates must be able to work at “Christa speed” – efficiently and proactively Hours between 16 - 24 Occasionally 30 Company DescriptionChrista has completed over $7.0 billion worth of construction throughout New York State. We have experience in the construction of multi-family, senior and student housing, commercial offices, municipality work, medical facilities, warehouses, hotels and restaurants. Whether you see our Christa sign in front of a housing complex, on a college or hospital campus, or in front of a major athletic stadium, our goal is always the same—to build value for our clients, the facility’s end users and the communities these buildings will serve. That’s been the way since 1982.Christa has completed over $7.0 billion worth of construction throughout New York State. We have experience in the construction of multi-family, senior and student housing, commercial offices, municipality work, medical facilities, warehouses, hotels and restaurants.\r\n\r\nWhether you see our Christa sign in front of a housing complex, on a college or hospital campus, or in front of a major athletic stadium, our goal is always the same—to build value for our clients, the facility’s end users and the communities these buildings will serve. That’s been the way since 1982.

Job DescriptionCMM PROGRAMMER Advantech Industries Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. Advantech Industries Inc. is currently recruiting CMM Programmers. Under the supervision of the QC Manager, the CMM Programmer is responsible for setting up and executing new CMM Programs. DUTIES & RESPONSIBILITIES Duties include, but are not limited to, the following: • Setting up and executing new CMM Programs., • Position involves first piece inspection., • Must be accountable for quality of work performed., • Must maintain a clean and orderly work environment. SKILLS & QUALIFICATIONS • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes., • Maintains adequate levels of performance and motivation despite job tasks that are routine, repetitive, and/or non-stimulating., • Ability to understand and carry out oral and written directives., • Ability to read and interpret blueprints., • Experience with PC-DMIS Software preferred., • Experience with Brown & Sharpe CMM preferred., • Solid computer, organizational and problem-solving skills., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible., • Maintains organizational files and records., • Ability to operate machines and use tools such as coordinate measuring machine (CMM), FabriVision, height gage, comparator and profilometer., • 3-5 years' experience checking parts and programming on a CMM., • 3 years' experience in quality control and a minimum of 3 years' experience in sheet metal/machining., • High School Diploma or equivalent required. JOB BENEFITS • Vacation, • Sick Days, • Holidays, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with Company Match According to the New York Pay Transparency law, pay range for this job is $28.00 - $33.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodation for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources. Monday through Friday 7:30 am to 4:00 pm Full time employment

Job DescriptionDescription: Summary: The CNC Machinist is responsible for the safe operation and set up of a wide variety of Computerized Numerical Control Machining Centers (CNC) or other production machines using programs and tooling that have been previously used to manufacture a product and is capable of doing this with little supervision. • Must work with Management to debug and optimize manufacturing processes for jobs or machines which they are responsible., • Must demonstrate a very high level of competency with all types of metal working equipment, both manual and CNC., • Must demonstrate the ability to debug machining processes and communicate those processes for manufacturing., • Must be able to diagnose process problems and determine the cause of the problem., • Must be able to implement corrective action to prevent reoccurrence of problems., • Must be aware of the budget and delivery requirements for work assigned to them and report to management any difficulties that would cause the cost of the work to exceed budget or miss a scheduled delivery., • Must have a thorough understanding of safe operation of metal working equipment, including but not limited to starting and stopping the machining cycle, interrupting the machine cycle, performing offsets to tool length and diameter and restarting the machining cycle., • Must have a thorough knowledge of CNC program code and be able to document and perform edits of the code to enhance machining processes., • Installs machining fixtures and tooling using Tool Sheet and Setup instructions with no supervision., • Orients fixtures and tools to machine coordinate systems, inputs machine, fixture and tool offsets., • Loads appropriate CNC program into machine control., • Loads material into holding fixtures, following verbal and/or written instructions., • Produces “first piece” from setup while observing machining cycle to prevent damage to work piece, tooling, machine or injury to operator., • Must be able to read, understand and interpret blueprints and specifications, including GD&T., • Observes and listens to machine operation to detect malfunctions, such as worn or damaged cutting tools., • Performs a variety of inspection and gaging operations to insure maintenance of quality standards and specifications and have the ability to record the results of these inspections., • Notifies supervisor of discrepancies., • Must be able to train CNC Operators in the safe operation of the machines that they have set up., • Cleans machine, tooling, and parts as instructed., • Performs daily preventative machine maintenance as instructed., • Other duties as assigned. Requirements: Education • High school diploma or general education degree (GED) required., • 5+ years related experience and/or training; or equivalent combination of education and experience required. Skills: • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, mechanical drawings and specifications., • Ability to write routine reports and correspondence., • Ability to speak effectively before groups of customers or employees., • Ability to add and subtract four-digit numbers and to multiply and divide., • Ability to perform these operations using units of measurement, volume, and distance. Basic understanding of Geometry and Trigonometry., • Ability to apply common sense understanding to carry out complex instructions furnished in written, oral, or diagram form., • Ability to deal with problems involving several variables in situations requiring a high level of judgment and reasoning., • Microsoft Office Suite, • Epicor Vista™ integrated manufacturing and accounting solution, • Adobe Acrobat, • Windows Operating Systems, • Internet Explorer or equivalent, • Must be able to read, understand and interpret mechanical drawings., • Working knowledge of “G” & “M” Codes is required., • Demonstrate a working understanding of CNC Machine Coordinate Systems., • Demonstrate competency on a wide variety of machines and controls.

Job Description Title CNC Machinist I Department Machine Shop Reports to Machine Shop Manager Schedule: Monday-Friday, 10:00 PM-6:30 AM. New hires will complete approximately 4-6 weeks of training on 1st Shift before transitioning to 3rd Shift. Includes a 10% shift differential. SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in the Rochester area, RPO offers exciting career paths to work on market-leading programs across a variety of industries. Position Overview: The CNC Machinist I is responsible for operating, monitoring, and optimizing CNC machining processes to produce high-precision components in a production manufacturing environment. This role requires a strong understanding of machining fundamentals, blueprint interpretation, inspection techniques, tooling, and process control to consistently achieve quality and production objectives. Working from established setups, programs, and process documentation, the CNC Machinist I monitors machining performance, performs advanced inspections, troubleshoots production issues, and makes appropriate process adjustments to maintain dimensional accuracy, quality, and throughput. This position serves as a technical resource within the machining department and plays a key role in supporting safe, efficient, and cost-effective manufacturing operations. Key Responsibilities: • Review and interpret engineering drawings, blueprints, specifications, routers, and work instructions to understand part requirements, tolerances, and machining processes., • Operate CNC mills, lathes, and other machining equipment using established programs, setups, and process documentation., • Monitor machining operations and make appropriate adjustments to offsets, tooling, feeds, speeds, and process parameters to maintain dimensional accuracy, quality, and productivity., • Perform advanced in-process and final inspections using micrometers, calipers, indicators, height gauges, thread gauges, optical comparators, and other precision measuring equipment., • Verify product conformance to dimensional, geometric, and cosmetic requirements and ensure all quality standards are met., • Troubleshoot machining, tooling, quality, and process-related issues and communicate concerns to technical leads or management as appropriate., • Perform tooling changes, tool life monitoring, and wear compensation to maintain stable machining processes., • Assist with machine setup activities, process validation, and first-piece verification when required., • Maintain accurate production, inspection, maintenance, and ERP documentation., • Support continuous improvement initiatives focused on quality, efficiency, throughput, scrap reduction, and cost savings., • Train, assist, and support less experienced operators as needed while promoting best practices within the department., • Perform and document routine operator-level preventative maintenance activities., • Maintain a clean, organized, and safe work environment., • Be available for occasional overtime to support production requirements. Required Skills & Qualifications: • High School Diploma/GED or vocational equivalent required., • Minimum 3 years of CNC machining experience within a precision manufacturing environment., • Demonstrated experience operating CNC mills and/or lathes, including offset adjustments, tooling changes, process monitoring, and troubleshooting production issues., • Ability to read and interpret engineering drawings, blueprints, specifications, and GD&T requirements., • Strong understanding of machining principles including feeds, speeds, tool wear, cutting tool selection, and process control., • Proficiency with precision inspection equipment including micrometers, calipers, indicators, height gauges, thread gauges, optical comparators, and similar metrology tools., • Working knowledge of G-code and M-code programming, including the ability to review and perform minor program edits when required., • Understanding of machine setup principles and machining processes, with the ability to support setup and process validation activities., • Strong mechanical aptitude and problem-solving skills with the ability to identify and resolve machining and quality concerns., • Demonstrated commitment to safety, quality, attention to detail, and continuous improvement. Core Competencies: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude; Additional Requirements: Pursuant to ITAR, EAR, and other export compliance laws and regulations, applicants for this position must be U.S. Persons as defined by U.S. law, i.e., U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty. Compensation & Benefits: • Competitive compensation package linked to your experience and performance., • 401(k) with company match and Tuition Reimbursement opportunities., • Health, dental, vision, HSA, & life insurance., • Paid time off including vacation, sick time, and 11 paid company holidays Environment & Physical Demands: • This position works primarily in a manufacturing environment supporting CNC machining operations and precision component production., • Requires prolonged periods of standing and walking throughout the workday while operating equipment, performing inspections, and supporting production activities., • Regular use of hands, fingers, and arms to operate machinery, handle tooling, manipulate parts, and perform precision measurements., • Frequent lifting, carrying, pushing, and pulling of raw materials, tooling, fixtures, and finished components. Ability to safely lift up to 50 pounds is required., • Requires frequent bending, reaching, twisting, crouching, and movement around machining equipment and workstations., • Regular use of precision measuring equipment including micrometers, calipers, indicators, height gauges, comparators, and other metrology tools., • Requires visual acuity sufficient to inspect parts, identify defects, verify dimensions, review technical documentation, and safely operate equipment., • Frequent interaction with CNC mills, lathes and other manufacturing equipment containing moving mechanical components., • Regular exposure to machine oils, coolants, metal chips, lubricants, cleaning agents, and other manufacturing-related materials., • Safety glasses with side shields and other required personal protective equipment (PPE) must be worn in designated manufacturing areas., • Noise levels are typically moderate to loud and may require hearing protection in designated areas., • Requires routine use of computers and manufacturing software for reviewing work instructions, documenting production activities, accessing ERP systems, and recording inspection data., • May work across multiple machining cells, equipment platforms, or departments based on production requirements and business needs., • Occasional overtime may be required to support production schedules, customer commitments, and departmental objectives. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Race/Gender/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Schedule: Monday-Friday, 10:00 PM-6:30 AM. New hires will complete approximately 4-6 weeks of training on 1st Shift before transitioning to 3rd Shift. Includes a 10% shift differential.

Job Description We are hiring a Machine Shop Quality Technician in Rochester, NY. This is a precision machine shop that manufactures tight-tolerance components for the aerospace and defense industries — parts that have to be right every time. As a Quality Technician, you'll be a critical line of defense in a high-mix, low-volume environment where no two days are the same and your eye for detail directly impacts mission-critical products. You'll work closely alongside engineers and machinists and have real ownership over inspection processes. What you'll do: • Perform first-piece, in-process, and final inspections on machined parts to the highest quality standards, • Interpret engineering drawings, GD&T callouts, and job specifications with confidence, • Conduct gage calibration and maintain accurate records in Gage Track software, • Audit production quality at every phase of manufacture and document findings clearly, • Partner with engineers and machinists on root cause analysis and continuous improvement, • Develop and maintain detailed in-process and final inspection reports, • Support AS9100 / ISO 9001 compliance and participate in internal audits Requirements • 5+ years of quality inspection experience in a machine shop or precision manufacturing environment, • Solid command of standard measurement tools: calipers, micrometers, CMM, height gauges, etc., • Strong blueprint reading skills including GD&T, • Familiarity with AS9100 / ISO 9001 quality management systems, • Organized, detail-obsessed, and able to manage multiple inspection queues under deadline pressure, • High school diploma or equivalent; internal auditing experience is a plus Benefits • Medical, dental & vision, • 401(k), • PTO, • Day & evening shifts available

Job Description Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning QS:9000, ISO:9002, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol -free working environment. General Job Description: In this position, the Quality Technician performs dimensional and/or functional inspection on purchased materials and manufactured parts. Uses technical expertise and inspection instrumentation to verify conformance of materials/parts to prints, process sheets and specifications. Minimum Qualifications: • Know & understand the use of all inspection equipment including (but not limited to):, • Micrometers, • Calipers, • Dial Indicators, • Height Gages, • Optical Comparators, • Gage Pins and Gage Blocks, • Sine Blocks and Setups, • Surface Finish Testers, • CMM, • Thread Gages, • Understand basic Geometric Tolerance. Able to read and understand drawings, • Knowledgeable about current quality system standards such as ISO-9002 and/or TS16949, • Ability to multitask in response to numerous demands; time management skills, • Computer literate: Excel, Word, etc., • Attention to detail Desired Skills: • Experience with inspection and measuring equipment calibration, • Previous auditing experience and skills, • Experience writing procedures and work instructions, • PPAP documentation experience Specific Duties: • Perform first piece, in-process and final inspections, • Provide inspection results for inclusion PPAP's, • Understand cosmetic part requirements based on specific customer standards, • Provide inspection support based on needs of Manufacturing and Engineering Managers, • Maintain up to date documentation by completing all necessary paperwork, i.e. in-process inspection records, signing off on travelers, 1st piece inspection tags, etc., • Perform basic training as required for operator or team leader for First-Piece and In-Process Inspection, • Provide continuous feedback to Production regarding quality, engineering and manufacturing-related issues, • Suggest process improvements, • Perform part and process related internal audits, • Maintain QA Lab and equipment in clean, orderly condition, • Special projects and assignments Physical Requirements: • Regularly lifts and/or moves 25-50 lbs., • Requires frequent reaching, handling and grasping, • Requires occasional climbing of stairs, balancing, bending, crouching, fine manipulation and feeling This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary. Benefits • 401(k), • Health Insurance, • Paid time off, • Vision Insurance, • Dental Insurance, • Life Insurance

Job DescriptionDescription: Description Weco is a value-added single-source contract manufacturer of machined components, finished fabricated sheet metal, and assembled metal products. Our three facilities encompass all aspects of metal product manufacturing including our own on-site finishing with powder, paint, and graphics capability. We serve the OEM Industrial, Healthcare/Medical Device, Aerospace/Defense, Renewable Energy, and Electronics by manufacturing both conventional and the most technically demanding items. We have been doing just that for companies from Fortune 500 to small and midsize firms since 1952. Benefits: • Competitive salary and benefits package, • Opportunity to work with a team of talented professionals, • Challenging and rewarding work environment, • Generous Paid Time Off, • Several health insurance plan options with a generous employer contribution to the premium, • Long term disability fully paid for by the company, • Enhanced short term disability fully paid for by the company, • Life insurance fully paid for by the company, • Employee Assistance program, • Dental and vision insurance, • 401k plan with company match, • HRA and HSA options for pre-tax savings with an employer funded HRA benefit, • Pet insurance enrollment option The hours for this position are Monday - Thursday 3:00 pm - 1:30 am. Summary: The CNC Machinist is responsible for the safe operation and set up of a wide variety of Computerized Numerical Control Machining Centers (CNC) or other production machines using programs and tooling that have been previously used to manufacture a product and is capable of doing this with little supervision. • Must work with Management to debug and optimize manufacturing processes for jobs or machines which they are responsible., • Must demonstrate a very high level of competency with all types of metal working equipment, both manual and CNC., • Must demonstrate the ability to debug machining processes and communicate those processes for manufacturing., • Must be able to diagnose process problems and determine the cause of the problem., • Must be able to implement corrective action to prevent reoccurrence of problems., • Must be aware of the budget and delivery requirements for work assigned to them and report to management any difficulties that would cause the cost of the work to exceed budget or miss a scheduled delivery., • Must have a thorough understanding of safe operation of metal working equipment, including but not limited to starting and stopping the machining cycle, interrupting the machine cycle, performing offsets to tool length and diameter and restarting the machining cycle., • Must have a thorough knowledge of CNC program code and be able to document and perform edits of the code to enhance machining processes., • Installs machining fixtures and tooling using Tool Sheet and Setup instructions with no supervision., • Orients fixtures and tools to machine coordinate systems, inputs machine, fixture and tool offsets., • Loads appropriate CNC program into machine control., • Loads material into holding fixtures, following verbal and/or written instructions., • Produces “first piece” from setup while observing machining cycle to prevent damage to work piece, tooling, machine or injury to operator., • Must be able to read, understand and interpret blueprints and specifications, including GD&T., • Observes and listens to machine operation to detect malfunctions, such as worn or damaged cutting tools., • Performs a variety of inspection and gaging operations to insure maintenance of quality standards and specifications and have the ability to record the results of these inspections., • Notifies supervisor of discrepancies., • Must be able to train CNC Operators in the safe operation of the machines that they have set up., • Cleans machine, tooling, and parts as instructed., • Performs daily preventative machine maintenance as instructed., • Other duties as assigned. Requirements: Education • High school diploma or general education degree (GED) required., • 5+ years related experience and/or training; or equivalent combination of education and experience required. Skills: • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, mechanical drawings and specifications., • Ability to write routine reports and correspondence., • Ability to speak effectively before groups of customers or employees., • Ability to add and subtract four-digit numbers and to multiply and divide., • Ability to perform these operations using units of measurement, volume, and distance. Basic understanding of Geometry and Trigonometry., • Ability to apply common sense understanding to carry out complex instructions furnished in written, oral, or diagram form., • Ability to deal with problems involving several variables in situations requiring a high level of judgment and reasoning., • Microsoft Office Suite, • Epicor Vista™ integrated manufacturing and accounting solution, • Adobe Acrobat, • Windows Operating Systems, • Internet Explorer or equivalent, • Must be able to read, understand and interpret mechanical drawings., • Working knowledge of “G” & “M” Codes is required., • Demonstrate a working understanding of CNC Machine Coordinate Systems., • Demonstrate competency on a wide variety of machines and controls.

Job DescriptionDescription: Position Summary Performs basic receiving, first-piece, in-process and final inspection in accordance with applicable quality system procedures and work instructions. Evaluates materials, components and/or assemblies for conformance to specification requirements or established workmanship standards. Applies basic statistical techniques, including statistical process control and sampling plans, to assess the stability of various processes or reduce collected raw data. Essential Duties and Responsibilities • Perform receiving inspection of incoming supplies requiring quality assurance evaluation prior to dispatch using the appropriate sampling plan., • Perform first-piece inspection of machined product and conduct in-process audits of work-in-progress in accordance with documented procedures under supervision., • Perform final inspection and test of deliverable product in accordance with documented procedures prior to release for shipment or storage., • Complete all required inspection and test records appropriate to the particular task and results of the inspection., • Understand and apply basic geometric dimensioning and tolerancing symbology., • Employ basic statistical tools to interpret data., • Understand Vantage operation for time and data reporting., • Perform other duties assigned by supervisor. Education, Training and/or ExperienceAssociate’s degree (AA) or equivalent from a two-year college or technical school; or 6 months related experience and/or training; or equivalent combination of education and experience. KSAO:This List represents the kinds of knowledge, skills, abilities and other characteristics that will be assessed in the performance of the employee performing this position.1 Written and Oral Communication • 1.1 Reading, Writing, Speaking & Listening 2 Mathematics • 2.1 Arithmetic, • 2.2 Applied Geometry, • 2.3 Applied Algebra, • 2.4 Applied Trigonometry, • 2.5 Applied Statistics 3 Decision Making & Problem Solving • 3.1 Applying Decisions, • 3.2 Basic Problem Solving 4 Social Skills & Personal Qualities • 4.1 Social Skills, • 4.2 Personal Qualities 5 Engineering Drawings & Sketches • 5.1 Basic Blueprints, • 5.2 Standard Blueprints, • 5.3 GD&T Reading 6 Measurements • 6.1 Basic Measurements, • 6.2 Precision Measurements, • 6.3 Surface Plate Instruments 7 Metalworking Theory • 7.1 Cutting Theory, • 7.2 Tooling, • 7.3 Material Properties, • 7.4 Machine Tools, • 7.5 Cutting Fluids & Coolants Quality System Documents Applicable to Position PGM is a process-driven company that is totally committed to customer satisfaction, evident by performance through the prevention of non-conformances at all stages of our relationship with purchasers of our products. Accordingly, all employees are empowered to identify problems with system, process or product quality and whenever possible, prevent discrepancies and suggest continuous improvement opportunities. PGM’s mission, vision and value statements are published in the Quality Management System (QMS) Policy Manual and posted throughout the building. The PGM QMS manual details the responsibilities that all employees share in the overall documented quality system. Requirements:

Job Description Job Summary: Conduct Quality Assurance audits and routine checks, tests, gauging and instrument inspections of materials, work in process and finished product. Assure company and product standards are maintained and product integrity is preserved. Consult with Quality Manager to resolve quality, production and efficiency problems. Function as an information source to various company departments when special and critical quality issues occur. Coordinate the flow of jobs through the Inspection Department to insure that we meet the scheduled customer ship date, Essential Duties and Responsibilities: • Determines overall product quality by conducting and evaluating various visual and product tests for obvious defects., • Routinely completes and interprets inspection paperwork and blueprints including GD&T., • Inspects incoming jobs from sub-contractors for quality and product integrity., • Performs in-process, first piece inspection and first article using various measuring equipment., • Notifies Quality Manager when inspection data exceeds acceptable limits or when major incidents of poor quality are detected., • Ensures that all measuring equipment is calibrated within acceptable tolerances and time frame., • Assists in development of special department projects and work in conjunction with QA Manager. Additional Responsibilities: • May cover for quality assurance personnel., • Performs product/process analysis for cost reduction, quality improvement, and improved efficiency., • When requested, may work on special projects and various related assignments., • Performs other related to work duties and assignments as required., • May perform First Article Inspection from new or modified tooling. Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. The employee is occasionally required to reach with hands and arms. The employee is occasionally required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 25 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from low, moderate to loud. Education, Skills and Experience: • Associates degree or equivalent in education and experience., • Minimum two years experience in quality control., • Experience with operating or programming a Sheffield or Zeiss CMM preferred., • Strong attention to detail, • Strong math skills, • Good oral and written communication skills., • Strong organization skills., • Must be familiar with computers and computer software., • Work independently with minimal supervision

Job DescriptionBenefits: • Competitive salary, • Employee discounts, • Flexible schedule, • Free uniforms, • Opportunity for advancement, • Training & development Position Overview OTF is looking for Fitness Coaches to lead our coach-inspired, science-backed, and technology-tracked workouts. Positions available at all Rochester locations; Pittsford, Baytowne and Victor. We Offer: • Compensation: Listed pay of $25 to $70 per session for certified personal trainers., • Flexible Scheduling: Unexpected daycare needs? Mid-week appointments? We understand you have a life outside of work!, • Studio Membership and Discounts: Access to free workouts and product discounts., • Paid Training: Complete the OTFit training requirement and be fully compensated for it.Day In The Life of a Fitness Coach:, • Lead and motivate members through pre-defined workouts, • Help members set and achieve goals, • Make sure members are using correct form and offering corrections if they arent, • Understand the science behind our workouts specifically, heart-rate focused training programs in general, and being aware of what the competition is doing, • Know how to use and demonstrate usage for every piece of equipment utilized in every workoutRequirements, • No degree is needed. We require a national fitness certification (NASM, ACE, ISSA, or NCCA accredited equivalent) or the ability to obtain a certification., • Were looking for individuals who can genuinely connect with and motivate others.About Orangetheory Fitness, • Orangetheory is a 1-hour, full-body heart rate zone and strength training workout that delivers a more personalized experience in a group setting. Designed to be effective and efficient, our workout classes boost metabolism, burn fat and calories, build strength and confidence, and improve overall fitness.Orangetheory Fitness - Hiring Steps, • 24 hours from now: Phone call, • 48 hours from now: Team interview, • Five days from now: Offer letter and set up training schedule.

Job Description Title CNC Machinist I Department Machine Shop Reports to Machine Shop Manager Schedule: Monday-Friday, 2:00 PM-10:30 PM. New hires will complete approximately 4-6 weeks of training on 1st Shift before transitioning to 2nd Shift. Includes a 5% shift differential. SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in the Rochester area, RPO offers exciting career paths to work on market-leading programs across a variety of industries. Position Overview: The CNC Machinist I is responsible for operating, monitoring, and optimizing CNC machining processes to produce high-precision components in a production manufacturing environment. This role requires a strong understanding of machining fundamentals, blueprint interpretation, inspection techniques, tooling, and process control to consistently achieve quality and production objectives. Working from established setups, programs, and process documentation, the CNC Machinist I monitors machining performance, performs advanced inspections, troubleshoots production issues, and makes appropriate process adjustments to maintain dimensional accuracy, quality, and throughput. This position serves as a technical resource within the machining department and plays a key role in supporting safe, efficient, and cost-effective manufacturing operations. Key Responsibilities: • Review and interpret engineering drawings, blueprints, specifications, routers, and work instructions to understand part requirements, tolerances, and machining processes., • Operate CNC mills, lathes, and other machining equipment using established programs, setups, and process documentation., • Monitor machining operations and make appropriate adjustments to offsets, tooling, feeds, speeds, and process parameters to maintain dimensional accuracy, quality, and productivity., • Perform advanced in-process and final inspections using micrometers, calipers, indicators, height gauges, thread gauges, optical comparators, and other precision measuring equipment., • Verify product conformance to dimensional, geometric, and cosmetic requirements and ensure all quality standards are met., • Troubleshoot machining, tooling, quality, and process-related issues and communicate concerns to technical leads or management as appropriate., • Perform tooling changes, tool life monitoring, and wear compensation to maintain stable machining processes., • Assist with machine setup activities, process validation, and first-piece verification when required., • Maintain accurate production, inspection, maintenance, and ERP documentation., • Support continuous improvement initiatives focused on quality, efficiency, throughput, scrap reduction, and cost savings., • Train, assist, and support less experienced operators as needed while promoting best practices within the department., • Perform and document routine operator-level preventative maintenance activities., • Maintain a clean, organized, and safe work environment., • Be available for occasional overtime to support production requirements. Required Skills & Qualifications: • High School Diploma/GED or vocational equivalent required., • Minimum 3 years of CNC machining experience within a precision manufacturing environment., • Demonstrated experience operating CNC mills and/or lathes, including offset adjustments, tooling changes, process monitoring, and troubleshooting production issues., • Ability to read and interpret engineering drawings, blueprints, specifications, and GD&T requirements., • Strong understanding of machining principles including feeds, speeds, tool wear, cutting tool selection, and process control., • Proficiency with precision inspection equipment including micrometers, calipers, indicators, height gauges, thread gauges, optical comparators, and similar metrology tools., • Working knowledge of G-code and M-code programming, including the ability to review and perform minor program edits when required., • Understanding of machine setup principles and machining processes, with the ability to support setup and process validation activities., • Strong mechanical aptitude and problem-solving skills with the ability to identify and resolve machining and quality concerns., • Demonstrated commitment to safety, quality, attention to detail, and continuous improvement. Core Competencies: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude; Additional Requirements: Pursuant to ITAR, EAR, and other export compliance laws and regulations, applicants for this position must be U.S. Persons as defined by U.S. law, i.e., U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty. Compensation & Benefits: • Competitive compensation package linked to your experience and performance., • 401(k) with company match and Tuition Reimbursement opportunities., • Health, dental, vision, HSA, & life insurance., • Paid time off including vacation, sick time, and 11 paid company holidays Environment & Physical Demands: • This position works primarily in a manufacturing environment supporting CNC machining operations and precision component production., • Requires prolonged periods of standing and walking throughout the workday while operating equipment, performing inspections, and supporting production activities., • Regular use of hands, fingers, and arms to operate machinery, handle tooling, manipulate parts, and perform precision measurements., • Frequent lifting, carrying, pushing, and pulling of raw materials, tooling, fixtures, and finished components. Ability to safely lift up to 50 pounds is required., • Requires frequent bending, reaching, twisting, crouching, and movement around machining equipment and workstations., • Regular use of precision measuring equipment including micrometers, calipers, indicators, height gauges, comparators, and other metrology tools., • Requires visual acuity sufficient to inspect parts, identify defects, verify dimensions, review technical documentation, and safely operate equipment., • Frequent interaction with CNC mills, lathes and other manufacturing equipment containing moving mechanical components., • Regular exposure to machine oils, coolants, metal chips, lubricants, cleaning agents, and other manufacturing-related materials., • Safety glasses with side shields and other required personal protective equipment (PPE) must be worn in designated manufacturing areas., • Noise levels are typically moderate to loud and may require hearing protection in designated areas., • Requires routine use of computers and manufacturing software for reviewing work instructions, documenting production activities, accessing ERP systems, and recording inspection data., • May work across multiple machining cells, equipment platforms, or departments based on production requirements and business needs., • Occasional overtime may be required to support production schedules, customer commitments, and departmental objectives. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Race/Gender/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Monday-Friday, 2:00 PM-10:30 PM. New hires will complete approximately 4-6 weeks of training on 1st Shift before transitioning to 2nd Shift. Includes a 5% shift differential.

Job Description Summary: Prints lettering and designs with screen printing device on various substrates by performing the following duties. Essential Duties and Responsibilities include the following. (Other duties may be assigned) · Understands job packet and ticket information. · Sets up semi-automatic screen press, adjusting guides, material, squeegee blade and ink. · Adjusts register and color of printed piece. · Cleans screen with solvent at end of run and when using different colors. · Examines printed object for defects, as well as other operators printed pieces for quality inspections. · Responsible for ones printed product. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The position will require initiative & potential for learning on hand mechanical skills. Education/Experience: High school diploma or general education degree (GED); experience and/or training is a plus, but not a requirement. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to speak effectively with team members & management. Math Ability: Ability to perform basic math; to include ability to perform these operations using units of American money, weight measurement, volume, and distance. Ability to measure with ruler and other tools down to thousandths of an inch. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Baseline problem solving. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to toxic or caustic chemicals. The noise level in the work environment is usually loud. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · Specific vision abilities required by this job include Close vision. While performing the duties of this Job, the employee is regularly required to stand. The employee is occasionally required to walk; use hands to finger, handle, or feel and reach with hands and arms. Company DescriptionWe’re Infinia Search. We’re a relationship-driven search firm that proves that talent, ambition, curiosity, and an infinite work ethic creates exponential results for our clients and candidates.We’re Infinia Search. We’re a relationship-driven search firm that proves that talent, ambition, curiosity, and an infinite work ethic creates exponential results for our clients and candidates.

Job DescriptionDescription: Where Precision Meets Possibility We don't just make parts - we craft perfection down to the micron. At Addison Precision Manufacturing, we're the masterminds behind the components that power aerospace innovations, advance medical breakthroughs, and drive manufacturing excellence. Our arsenal? State-of-the-art technology and advanced machinery paired with unmatched expertise that set industry standards in precision machining. We're not your average manufacturing facility. We're a team of precision perfectionists who: Transform raw materials into aerospace marvels, create components that save lives in medical devices, set the gold standard in manufacturing excellence and deliver quality that keeps our clients coming back. If you believe that 'good enough' isn't good enough, and precision is your passion, you might just be who we're looking for. Join us in shaping the future of precision manufacturing - where every thousandth of an inch matters, and excellence isn't just a goal, it's our standard operating procedure. Position Summary We are seeking a detail-oriented Visual Inspector to ensure product quality through thorough visual examination and inspection processes. This role is crucial in maintaining our quality standards by identifying defects, documenting findings, and preventing non-conforming product from reaching customers. What We Offer • Competitive salary based on experience, • Career development opportunities, • Climate-controlled work environment, • State-of-the-art machinery and equipment Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance Requirements: Key Responsibilities: • Audit quality of production during all phases of manufacturing., • Perform first piece, in-progress, and final inspection of machined parts., • Perform Gage calibration and record keeping using Gage Track software., • Develop detailed in-process and final inspection reports., • Interpret various drawing specifications., • Work with both quality and manufacturing engineers to help develop processes., • Ensure documentation is completed in a timely manner, prior to deadlines and precise., • Familiarization with AS9100 and ISO9001:2000 standards Qualification Requirements: • High school diploma or GED Required; Trade/Vocational certificate in precision machining a plus!, • 3+ years of experience within quality inspection in a manufacturing environment. Precision machining experience a plus!, • Experience with quality control techniques and methods, • Experience with standard measuring devices., • Ability to read blueprints and drawings including GDT., • Use inspection equipment efficiently., • Strong interpersonal and organizational skills., • Must be able to multitask while maintaining a high level of attention to detail., • Internal Auditing experience is a plus. Environment & Physical Demands: • While performing the duties of this job, the employee is regularly required to stand, walk, stoop, kneel, crouch, and talk and hear., • The job may involve prolonged periods of sitting and standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain)., • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally, works in a clean environment and works to maintain the environment as such., • Safety Glasses are required and may require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud., • May work at different workstations as production needs require, or shifts from one station to another, during the production process.

About the Company Precision. Performance. Parlec. Parlec is a proud member of Techniks Tool Group, and has been a trusted name in American-made tooling solutions since 1948. We serve manufacturers across North America with innovative, productivity-boosting products designed to meet the highest standards of performance and reliability. 4 ten hour days with Friday off Air conditioned manufacturing floor Benefits offered include: Medical/Dental/Vision/401k match/Company paid Short Term and Long Term disability/Company paid Life insurance About the Role Set up and make world class parts in an efficient manner. Must be a dependable, team player. Intermediate to advanced blueprint reading with GD&T. Must have good tooling and machining background. Set up and make world class parts in an efficient manner. Must be a dependable, team player. Responsibilities • Set up and operate any CNC horizontal and vertical mills safely and productively., • Perform first piece and in-process inspections., • Load parts into machines., • Able to work independently., • Keep area neat and clean., • Ability to resolve issues with minimal supervision., • Responsible for deburring parts and keeping them ding free. Qualifications High School Diploma or equivalent. Minimum of two years machining experience and/or training; or equivalent combination of education and experience. Required Skills • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Preferred Skills • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists., • Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. We are committed to diversity and inclusivity.

Job DescriptionDescription: Position Summary Operates CNC (Computer Numerically Controlled) lathes or mills or to machine metallic and nonmetallic work pieces to produce precision machined parts to acceptable levels of efficiency and quality on both new and existing production processes. Works on the highest level, most complicated jobs. Operates machining centers on repetitive production work involving skill and dexterity in the operating. Attention is required to prevent damage product or damage to machine center. Makes necessary machine adjustments to ensure satisfactory production. Inspect work for obvious defects and dimensional integrity. Mentors and leads lower level employees. Essential Duties and Responsibilities In addition to adhering to the policies of the company outlined in the PGM Employee Handbook, an individual servicing in this capacity shall consistently able to: • Operate CNC mills and/or lathes running new and existing production processes using proper procedures and equipment to establish and ensure consistent and quality parts, optimum perishable tooling usage, and acceptable quality levels., • Work with Set-up Operators debugging and developing new production processes and learning set-up skills., • Perform routine preventative maintenance, as required., • Provide training and instruction as needed to CNC I, II, and III operators in the operation and preventative maintenance of CNC mills and/or lathes and proper usage of required inspection equipment., • Monitor and maintain perishable tooling inventory for each assigned job., • Establish and perform all required inspection duties to maintain acceptable quality levels., • Record Statistical Process Control (SPC) data, as required., • Inform supervisor of any problems associated with equipment, processes or procedures trying to explore, develop and recommend continuous improvement ideas., • Analyzes blueprint and specifications., • Complete job related paperwork accurately and completely, which includes: expedite sheets, move tickets, and job cards., • Advanced GD&T skills., • Basic and Advanced Vantage training., • Perform basic to complicated repeat set-ups, tear downs and organize perishable tool list – tool list to proper kit location., • Verifies spindle, feed rate, depth of cut and tool positions relative to work piece., • Follow company policies as outlined in the employee handbook., • Other duties may be assigned. Supervisory Responsibilities This position may have team leadership responsibilities. Education, Training and/or Experience High school diploma, general education degree (GED), and/or technical school, associates degree; and five to seven years related experience and/or training; or equivalent combination of education and experience. Requirements: Benefits: • Competitive Pay, • Medical effective on start date, • Dental, • Life Insurance (plus additional supplemental coverage), • 401(k) program, • Short & Long Term Disability, • Profit Sharing Program, • Vacation Program, • Educational Financial Assistance, • Flexible Spending Accounts, • Health Savings Accounts, • And others! EEO Statement PGM will consider all individuals for any position for which they are qualified and able to perform. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities and veterans to apply to all of our job openings. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, or national origin, age, disability status, Genetic Information & Testing, Family & Medical Leave, protected veteran status, or any other characteristic protected by law.

Job Description CNC OPERATOR Advantech Industries, Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. We are currently seeking an individual to collaborate with us as a CNC Operator. The CNC Operator is responsible for the observation of machines to verify the accuracy of the machine settings and to detect malfunctions or out-of-tolerance machining, by using precision measuring instruments such as micrometers and calipers. Additionally, the CNC Operator is responsible for the controlled operation of computerized deburring and tooling machines to perform a variety of machining operations, which include drilling and deburring and the completion of first piece and in-process inspections. DUTIES & RESPONSIBILITIES: • Observes CNC Mill or CNC Lathe machine operation to verify accuracy of machine settings and to detect malfunctions or out-of-tolerance machining, using precision measuring instruments such as micrometer and dial caliper., • Maintain a clean machine and work area., • Controls operation of computerized deburring and tooling machine to perform series of machining operations, such as drilling and deburring., • Inspects “first part” and inspects work pieces throughout the production run, for out-of-tolerance machining. SKILLS & QUALIFICATIONS: • With limited supervision and quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved, • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes, • Maintains adequate levels of performance and motivation despite job tasks that are routine, repetitive, and/or non-stimulating, • Ability to understand and carry out oral and written directives, • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible, • Thorough operational knowledge and skills of specific equipment to be operated, • Ability to operate assigned equipment safely and efficiently, • Ability to keep record of time spent and material used, • Ability to use precision measuring tools and equipment, read drawings and blueprints, and be familiar with common machine and measuring tools, including micrometers and calipers, • Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals JOB BENEFITS • Vacation, • Paid Sick Leave, • Holidays, • Health, • Dental, • Vision, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with Company Match According to the New York Pay Transparency law, pay range for this job is $17.00 - $29.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources. Monday through Friday 7:30 am to 4:00 pm Full time employment (39.75 hours per week)

Job DescriptionDescription: Position Summary Operates CNC (Computer Numerically Controlled) lathes or mills or to machine metallic and nonmetallic work pieces to produce precision machined parts to acceptable levels of efficiency and quality on both new and existing production processes. Operates machining centers on repetitive production work involving skill and dexterity in the operating. Attention is required to prevent damage product or damage to machine center. Makes necessary machine adjustments to ensure satisfactory production. Inspect work for obvious defects and dimensional integrity. Requirements: Essential Duties and Responsibilities In addition to adhering to the policies of the company outlined in the PGM Employee Handbook, an individual servicing in this capacity shall consistently be able to: • Operate CNC mills and/or lathes running new and existing production processes using proper procedures and equipment to establish and ensure consistent and quality parts, optimum perishable tooling usage, and acceptable quality levels., • Work with Set-up Operators debugging and developing new production processes and learning st-up skills., • Perform routine preventative maintenance, as required., • Provide training and instruction as needed to CNC I and CNC II operators in the operation and preventative maintenance of CNC mills and/or lathes and proper usage of required inspection equipment., • Monitor and maintain perishable tooling inventory for each assigned job., • Establish and perform all required inspection duties to maintain acceptable quality levels., • Record Statistical Process Control (SPC) data, as required., • Inform supervisor of any problems associated with equipment, processes or procedures trying to explore, develop and recommend continuous improvement ideas., • Analyzes blueprint and specifications., • Complete job related paperwork accurately and completely, which includes: expedite sheets, move tickets, and job cards., • Basic GD&T skills., • Basic and Advanced Vantage training., • Perform basic repeat set-ups, tear downs and organize perishable tool list – tool list to proper kit location., • Verifies spindle, feed rate, depth of cut and tool positions relative to work piece., • Follow company policies as outlined in the employee handbook., • Other duties may be assigned. Supervisory Responsibilities This position has no supervisory responsibilities. Education, Training and/or Experience High school diploma or general education degree (GED) and/or technical school, associates degree; and three to five years related experience and/or training; or equivalent combination of education and experience. Internal Training Requirements • Company Benefits Orientation, • Bloodborne Pathogen, • Company Practices & Policies, • Fire Extinguisher Safety, • Mission, Vision & Values Training, • Hazardous Communication, • Values Based Leadership, • Lock Out/Tag Out Video, • Traveler Sign-Off, • Personal Protection Equipment, • Right-to-Know Training

Job DescriptionDescription: Position Summary Operates CNC (Computer Numerically Controlled) lathes and/or mills to machine metallic and nonmetallic workpieces to produce precision machined parts at acceptable levels of efficiency and quality on both new and existing production processes. Operates machining centers on repetitive production work involving skill and dexterity in the operating. Attention is required to prevent damaged product or damage to machine center. Making necessary minor machine adjustments to ensure satisfactory production. Inspect work for obvious defects and dimensional integrity Requirements: Essential Duties and Responsibilities In addition to adhering to the policies of the company outlined in the PGM Employee Handbook, an individual servicing in this capacity shall consistently be able to: • Operate CNC mills and/or lathes, running new and existing production jobs of moderate complexity without assistance unless unusual problems occur. Must be able to make minor adjustments when necessary., • Monitor perishable tooling inventory for each assigned job., • Perform all required inspection duties to maintain acceptable quality levels., • Inform supervisor of any problems associated with equipment, processes or procedures and offer ideas or possible solutions., • Complete job-related paperwork accurately and completely which includes: expedite sheets, move tickets, and job cards., • Perform routine preventative maintenance, as required, including but not limited to daily preventative machine maintenance logs., • Analyzes blueprint and specifications manual for requirements such as dimensions and tolerances, tooling instructions on fixturing, gauging, print rev. level, and cutting instruments., • Computes unspecified dimensions and necessary machine settings as required by the work order., • Positions and secures tools in holders, lifts work piece manually or with hoist, and secures work piece in chuck or appropriate fixture., • Starts machine, turns or initiates software program and engages feed. Directs coolant flow to tool and work piece., • Observes material removal step(s) to verify process integrity and detect excessive wear or malfunction., • Verifies conformance of machined work pieces to specification tolerances., • Plots dimensional data on control charts and collects SPC Data. Initiates proper procedural action if control chart warning limits are identified or out-of-tolerance conditions are experienced., • Basic and Advanced Vantage training, • Follow company policies as outlined in the employee handbook and values, • Other duties may be assigned. Supervisory Responsibilities This job has no supervisory responsibilities. Education, Training and/or Experience High school diploma or general education degree (GED); and one to five years related experience and/or training or equivalent combination of education and experience. Internal Training Requirements • Company Practices & Policies, • Lock Out/Tag Out Video, • Company Benefits Orientation, • Personal Protection Equipment, • Mission, Vision & Values Training, • Right-to-Know Training, • Values Based Leadership, • Traveler Sign-Off, • Bloodborne Pathogen, • Hazardous Communication, • Fire Extinguisher Safety Benefits: • Competitive Pay, • Medical effective on start date, • Dental, • Life Insurance (plus additional supplemental coverage), • 401(k) program, • Short & Long Term Disability, • Profit Sharing Program, • Vacation Program, • Educational Financial Assistance, • Flexible Spending Accounts, • Health Savings Accounts, • And others!

Job DescriptionDescription: Position Summary Responsible for inspecting parts from manufacturing as well as outside services to ensure they meet and exceed our customer standards. Duties and Responsibilities: · Audit quality of production during all phases of manufacture · Perform first piece, in-progress, and final inspection of machined parts · Perform Gage calibration and record keeping using Gage Track software. · Develop detailed in-process and final inspection reports · Interpret various drawing specifications · Work with engineers to help develop processes · Work with manufacturing on continuous progress improvement · Ensure documentation is completed in a timely manner, prior to deadlines and precise. · Familiarization with AS9100 and ISO9001:2000 standards Requirements: Qualification Requirements: · Experience with quality control techniques and methods · Experience with standard measuring devices · 5 years of experience performing Quality Inspector responsibilities · Ability to read blueprints and drawings including GDT. · Use inspection equipment efficiently · High school diploma or equivalent preferred · Strong interpersonal and organizational skills · Must be able to multitask while maintaining a high level of attention to detail. · Internal Auditing experience is a plus

Job Description Job Summary: Conduct Quality Assurance audits and routine checks, tests, gauging and instrument inspections of materials, work in process and finished product. Assure company and product standards are maintained and product integrity is preserved. Consult with Quality Manager to resolve quality, production and efficiency problems. Function as an information source to various company departments when special and critical quality issues occur. Coordinate the flow of jobs through the Inspection Department to insure that we meet the scheduled customer ship date, Essential Duties and Responsibilities: • Determines overall product quality by conducting and evaluating various visual and product tests for obvious defects., • Routinely completes and interprets inspection paperwork and blueprints including GD&T., • Inspects incoming jobs from sub-contractors for quality and product integrity., • Performs in-process, first piece inspection and first article using various measuring equipment., • Notifies Quality Manager when inspection data exceeds acceptable limits or when major incidents of poor quality are detected., • Ensures that all measuring equipment is calibrated within acceptable tolerances and time frame., • Assists in development of special department projects and work in conjunction with QA Manager. Additional Responsibilities: • May cover for quality assurance personnel., • Performs product/process analysis for cost reduction, quality improvement, and improved efficiency., • When requested, may work on special projects and various related assignments., • Performs other related to work duties and assignments as required., • May perform First Article Inspection from new or modified tooling. Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. The employee is occasionally required to reach with hands and arms. The employee is occasionally required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 25 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from low, moderate to loud. Education, Skills and Experience: • Associates degree or equivalent in education and experience., • Minimum two years experience in quality control., • Experience with operating or programming a Sheffield or Zeiss CMM preferred., • Strong attention to detail, • Strong math skills, • Good oral and written communication skills., • Strong organization skills., • Must be familiar with computers and computer software., • Work independently with minimal supervision This job description in no way states or implies that these are the only duties to be performed by this employee. He/she will be required to follow any other instructions and to perform any other responsible duties as requested by his/her supervisor. Syntec Optics is an Equal Opportunity/Affirmative Action Employer. Applicants are free to apply without regard to race, color, religion, sex/gender, gender identity, sexual orientation, marital status, pregnancy, genetic information, citizenship status, national origin, age, disability or veteran status or any other Federal or State legally protected classes. Read our EOE Policy Statement.

Job Description Position Summary The Senior Glass CNC Machinist is responsible for programming, setting up, operating, troubleshooting, and optimizing CNC equipment used in the precision machining of glass and optical components. This role serves as a technical resource within the department by mentoring machinists, improving manufacturing processes, creating work instructions, and ensuring products meet stringent optical quality and dimensional requirements. Essential Duties and Responsibilities • Set up and operate CNC equipment used to machine optical glass components., • Edit and optimize CNC programs to improve cycle times, quality, and efficiency., • Interpret engineering drawings, GD&T, work orders, and process documentation., • Perform machine setups, tooling changes, offsets, and first-piece inspections., • Manufacture components to tight dimensional and cosmetic tolerances., • Troubleshoot machining issues and recommend corrective actions., • Develop and improve machining processes for new and existing products., • Create and maintain work instructions, setup sheets, and machining documentation., • Work closely with Engineering to support new product introductions and process development., • Perform in-process inspections using precision measuring equipment., • Monitor machine performance and perform preventative maintenance activities., • Train and mentor CNC machinists and operators on best practices., • Support Lean Manufacturing and continuous improvement initiatives., • Maintain accurate production records and quality documentation., • Collaborate with Quality, Planning, and Manufacturing teams to meet production schedules., • Ensure compliance with ISO quality standards and all safety requirements., • Perform other duties as assigned. Qualifications • High school diploma or GED required., • Technical degree or CNC machining certification preferred., • Minimum of 7 years of CNC machining experience, preferably machining optical glass or brittle materials., • Experience with multi-axis CNC equipment preferred., • Experience in precision manufacturing or optics industry strongly preferred., • Ability to read and interpret engineering drawings and GD&T., • Strong computer skills and familiarity with CNC programming software., • Advanced knowledge of CNC machining principles., • Experience machining optical glass, fused silica, sapphire, ceramics, or similar materials., • Strong understanding of feeds, speeds, tooling, and grinding parameters., • Ability to optimize machining processes and reduce scrap., • Knowledge of precision inspection equipment including micrometers, indicators, comparators, and optical measurement systems., • Excellent troubleshooting and problem-solving skills., • Strong leadership and mentoring abilities., • Excellent organizational and communication skills., • Ability to manage multiple priorities while maintaining exceptional quality standards. Physical Requirements • Ability to stand and walk for extended periods., • Ability to lift up to 50 pounds occasionally., • Frequent use of hands and precision tools., • Ability to distinguish fine visual details., • Ability to safely operate manufacturing equipment and wear required PPE.

Job DescriptionDescription: This is a B-Shift Position starting at 4:00 PM and includes a 10% premium on base rate Please apply on our website www.pgmcorp.com Position Summary Operates CNC (Computer Numerically Controlled) lathes and/or mills to machine metallic and nonmetallic workpieces to produce precision machined parts at acceptable levels of efficiency and quality on both new and existing production processes. Operates machining centers on repetitive production work involving skill and dexterity in the operating. Attention is required to prevent damaged product or damage to machine center. Making necessary minor machine adjustments to ensure satisfactory production. Inspect work for obvious defects and dimensional integrity Requirements: Essential Duties and Responsibilities In addition to adhering to the policies of the company outlined in the PGM Employee Handbook, an individual servicing in this capacity shall consistently be able to: This is a B-Shift Position starting at 4:00 PM and includes a 10% premium on base rate • Operate CNC mills and/or lathes, running new and existing production jobs of moderate complexity without assistance unless unusual problems occur. Must be able to make minor adjustments when necessary., • Monitor perishable tooling inventory for each assigned job., • Perform all required inspection duties to maintain acceptable quality levels., • Inform supervisor of any problems associated with equipment, processes or procedures and offer ideas or possible solutions., • Complete job-related paperwork accurately and completely which includes: expedite sheets, move tickets, and job cards., • Perform routine preventative maintenance, as required, including but not limited to daily preventative machine maintenance logs., • Analyzes blueprint and specifications manual for requirements such as dimensions and tolerances, tooling instructions on fixturing, gauging, print rev. level, and cutting instruments., • Computes unspecified dimensions and necessary machine settings as required by the work order., • Positions and secures tools in holders, lifts work piece manually or with hoist, and secures work piece in chuck or appropriate fixture., • Starts machine, turns or initiates software program and engages feed. Directs coolant flow to tool and work piece., • Observes material removal step(s) to verify process integrity and detect excessive wear or malfunction., • Verifies conformance of machined work pieces to specification tolerances., • Plots dimensional data on control charts and collects SPC Data. Initiates proper procedural action if control chart warning limits are identified or out-of-tolerance conditions are experienced., • Basic and Advanced Vantage training, • Follow company policies as outlined in the employee handbook and values, • Other duties may be assigned. Supervisory Responsibilities This job has no supervisory responsibilities. Education, Training and/or Experience High school diploma or general education degree (GED); and one to five years related experience and/or training or equivalent combination of education and experience. Internal Training Requirements • Company Practices & Policies, • Lock Out/Tag Out Video, • Company Benefits Orientation, • Personal Protection Equipment, • Mission, Vision & Values Training, • Right-to-Know Training, • Values Based Leadership, • Traveler Sign-Off, • Bloodborne Pathogen, • Hazardous Communication, • Fire Extinguisher Safety This is a B-Shift Position starting at 4:00 PM and includes a 10% premium on base rate

Job DescriptionDescription: Position Summary Operates computer numerically controlled (CNC) lathes and/or mills to machine metallic and nonmetallic workpieces to satisfy requirements of released traveler packet. Operates machining centers on repetitive production involving skill and dexterity. Attention is required to prevent damage to product or damage to the machine center. Makes minor but necessary machine adjustments to ensure satisfactory production. Inspect works for dimensional integrity and obvious defects. Requirements: Essential Duties and Responsibilities In addition to adhering to the policies of the company outlined in the PGM Employee Handbook, an individual serving in this capacity shall be consistently able to: • Run jobs of minimal complexity on any CNC Machinery. Level of assistance while training varies with part and/or process., • Ability to read and understand traveler packet, including print and other specifications, for all applicable requirements such as dimensions and tolerances, tooling instructions, gauging and cutting instruments., • Position and secure tools in holders, lift workpieces manually or with a hoist and secure workpiece in chuck or appropriate fixture., • Start machine or initiate software program and engage feed. Direct coolant flow toward tool and work piece., • Observe material removal step(s) to detect excessive wear or malfunction., • Verify conformance of machined work pieces to specification tolerances., • Plot dimensional data on control charts or inputs information to SPC/Datamyte system if required. Initiate proper procedural action if control chart warning limits are identified or out-of-tolerance conditions are experienced., • Complete job-related paperwork accurately and completely, which includes expedite sheets, move tags and job cards, machine preventive maintenance., • Understand basic Vantage operation for time reporting., • Understand how to use elementary statistical tools., • Other duties may be assigned by supervisor., • Follow company policies and values. Supervisory Responsibilities This position has no supervisory responsibilities. Education, Training and/or Experience High school diploma or general education degree (GED); and six to twelve months related experience and/or training or equivalent combination of education and experience. Competencies To perform the job successfully, an individual should demonstrate the following competencies: • Problem Solving - Works well in group problem solving situations., • Technical Skills - Pursues training and development opportunities., • Customer Service - Responds promptly to customer needs; Responds to requests for service and assistance., • Interpersonal Skills - Listens to others without interrupting; Keeps emotions under control; Remains open to others' ideas and tries new things., • Oral Communication - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Demonstrates group presentation skills; Participates in meetings., • Written Communication - Writes clearly and informatively; Presents numerical data effectively; Able to read and interpret written information., • Teamwork - Exhibits objectivity and openness to others' views; Gives and welcomes feedback., • Leadership - Accepts feedback from others., • Diversity - Shows respect and sensitivity for cultural differences., • Ethics - Treats people with respect; Works with integrity and ethically; Upholds organizational values., • Organizational Support - Follows policies and procedures; Supports organization's goals and values., • Motivation - Measures self against standard of excellence., • Planning/Organizing - Uses time efficiently., • Professionalism - Approaches others in a tactful manner; Treats others with respect and consideration regardless if their status or position; Accepts responsibility for own actions., • Quality - Applies feedback to improve performance; Monitors own work to ensure quality., • Quantity - Meets productivity standards; Completes work in timely manner., • Safety and Security - Observes safety and security procedures; Uses equipment and materials properly., • Adaptability - Adapts to changes in the work environment., • Attendance/Punctuality - Is consistently at work and on time; Arrives at meetings and appointments on time., • Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions. Benefits: • Competitive Pay, • Medical effective on start date, • Dental, • Life Insurance (plus additional supplemental coverage), • 401(k) program, • Short & Long Term Disability, • Profit Sharing Program, • Vacation Program, • Educational Financial Assistance, • Flexible Spending Accounts, • Health Savings Accounts, • And others! PGM is an EOE Employer

Job Description Job Summary: Working from given instructions, will load programs into the controller, review the program and do intermediate setup of machine tools through first piece inspection approval. Essential Duties and Responsibilities: • Accountable for manufacturing complex parts and machine maintenance., • Able to control product quality during production runs using calipers, dial bore gages, micrometers, etc., • Measure and work with tight tolerance in accordance with control plan and blueprint., • Good working knowledge of proper machine operation and safety., • Manufacture product with tight tolerance in accordance with CAD models and blueprints., • May work with prototypes for potential future work., • Must be able to develop and machine basic fixtures with or without prints., • Keeps work area clean and organized., • Must be able to change tools and offsets. Additional Responsibilities: • When requested, may work on special projects and various related assignments., • May be required to edit programs at machine., • May be requested to instruct other personnel on the machine operation., • May be required to work in various areas of operations when necessary., • Performs other related duties and assignments as required. Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. Must be able to stand for long periods of time. The employee is occasionally required to reach with hands and arms. The employee is required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 50 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from moderate to loud. Education, Skills and Experience: • Minimum of 5 years experience in a machine shop environment., • Knowledgeable on set-ups, lathes and mills., • Understand GD&T and shop math., • Ability to read and understand cad-cam software., • Familiar with G and M codes., • Good communication skills., • Must be a good team player. This job description in no way states or implies that these are the only duties to be performed by this employee. He/she will be required to follow any other instructions and to perform any other responsible duties as requested by his/her supervisor. Syntec Optics is an Equal Opportunity/Affirmative Action Employer. Applicants are free to apply without regard to race, color, religion, sex/gender, gender identity, sexual orientation, marital status, pregnancy, genetic information, citizenship status, national origin, age, disability or veteran status or any other Federal or State legally protected classes. Read our EOE Policy Statement.

Job Title: Remote Inside Sales Representative Company: ForgeFit Location: Remote (U.S. Based) Employment Type: Full-Time About ForgeFit ForgeFit supplies cutting-edge fitness equipment to gyms and fitness centers nationwide. We’re not just another distributor, we’re a trusted partner in helping fitness facilities grow stronger, perform better, and stay ahead of the competition. Every piece of equipment we sell is backed by our 100% Performance Guarantee. We’re looking to hire driven, energetic sales professionals to help us expand our reach and impact. About the Role As a Remote Inside Sales Representative, you’ll play a key role in driving ForgeFit’s growth by reaching out to potential clients, responding to inbound inquiries, and guiding gym owners, fitness directors, and facility managers through the buying process. Your focus will be on identifying client needs, presenting tailored solutions, and closing deals, all from the comfort of your home office. What You’ll Do • Handle inbound sales inquiries and proactively reach out to warm leads, • Conduct virtual consultations with prospects via phone, video, and email, • Educate potential customers on ForgeFit’s product offerings and value, • Build and manage a pipeline of opportunities using CRM tools, • Follow up consistently to nurture relationships and close sales, • Collaborate with fulfillment and support teams to ensure a seamless client experience, • Meet or exceed monthly sales goals and performance targets What We’re Looking For • 1+ years of inside sales or customer-facing experience (B2B or fitness/health-related a plus), • Strong communication and relationship-building skills, • Comfortable with outbound outreach and closing sales virtually, • Self-motivated, goal-oriented, and highly organized, • Passion for fitness or knowledge of gym equipment is a bonus What We Offer • Competitive base pay + commission (uncapped earning potential), • Comprehensive benefits including medical, dental, vision, 401k, and paid time off, • 100% remote work with a collaborative and supportive team, • Comprehensive onboarding and ongoing product training, • Opportunities for professional development and advancement, • A chance to represent a brand that delivers real value to its customers Ready to help gyms get stronger with ForgeFit? Apply now and let's build something powerful together.

Job Description Dave's Hot Chicken in Henrietta Now Hiring Team Members Starting at $17 per hour with Immediate Growth Opportunities Summary: The Team Member is responsible and accountable for performing specific tasks and duties assigned within the Restaurant including Guest Service, Food prep, Restaurant Cleanliness and Teamwork. Job Expectations: The Team Member will work productively in a fast-paced environment, maintain a fast speed of service, interact with Guests, work closely with other Team Members to complete tasks, follow all safety and security procedures, and conduct other duties assigned by the Restaurant Management Team. Duties: • Follow the steps outlined in the DHC Training Program to learn new skills, duties, and responsibilities, • Abide by the rules and direction given by the Restaurant Management Team and refrain from insubordination, • Communicate to their immediate supervisor when additional training guidance and practice is needed, • Understand how each job responsibility impacts Guests, the Team, and overall Restaurant Operations and success, • Greet Guests, record orders, and serve food and beverages with a consistently positive and helpful attitude, including answering questions, • Work together with other Teammates to prepare items on the DHC menu while following cooking instructions, safety procedures, and sanitary requirements, • Communicate effectively with Team Members and Management to resolve any interpersonal issues as needed, • Use specific kitchen machinery/equipment such as ice cream dispensers, fryers, warmers, etc., • Ensure Restaurant cleanliness daily by clearing tables, sweeping, and mopping floors, washing/sanitizing/disinfecting kitchen utensils and high touch-point areas, and servicing restrooms, • Handle Guests’ concerns and complaints professionally and calmly to resolve problems according to Restaurant Policy, • Maintain a neat and tidy appearance by wearing a uniform and adhering to the DHC Uniform Policy, • Follows all company guidelines for food and cash controls; follows all cost control guidelines to maintain and minimize Restaurant costs and effectively uses all products, supplies, and equipment facilities, • Are performance-oriented and performance driven; understand performance expectations and are aware of performance results Requirements: • Must be at least 16 years old, • Flexibility to work nights, weekends, holidays, opening and closing shifts, • Ability to stand for long periods of time and work in a fast-paced environment, • Ability to work in close quarters and around heat, • Positive attitude while conducting any and all duties, • Commitment to guest satisfaction. Looks at Restaurant operations from the Guest's point of view, • Effective communicator with Teammates and the Restaurant Management Team, • Excellent Time Management Skills Transportation & Accessibility: • Must have reliable transportation to work, • Must have telephone or other reliable method of communicating with Restaurant Management Team and Teammates"About Dave's Hot Chicken Dave’s Hot Chicken was created by best friends Dave Kopushyan, Arman Oganesyan, and Tommy and Gary Rubenyan. Dave, a chef trained in Thomas Keller’s (French Laundry) organization set out to create the perfect Hot Chicken by searching, tasting, and frying. The four friends scrounged up $900 to put a tiny stand in an East Hollywood parking lot. The menu was simple, and the chicken was the star. And what chicken it is! Sourced and prepared to be the juiciest and most tender imaginable with each piece topped with Dave’s own mix of spices ranging from No Spice to “The Reaper.” Arman created Instagram buzz and the lines began to grow. Two nights later, Eater/LA showed up to see what the fuss was about. The next morning's headline read ""East Hollywood's Late Night Chicken Stand Might Blow Your Mind."" Almost instantly, the lines stretched around the block. A year later, the boys had the money to open a shop in a hip strip-mall with décor by local street artists, where the crowds continued to grow with wait-times of an hour and more. From there, the incredibly craveable “Hot and Spicy” varieties have created a cult following with rave reviews across the U.S. and Canada."

Job Description Team Member - Dave's Hot Chicken - Irondequoit, NY * $17 an Hour Starting Wage, plus Huge Growth Opportunities Summary: The Team Member is responsible and accountable for performing specific tasks and duties assigned within the Restaurant including Guest Service, Food prep, Restaurant Cleanliness and Teamwork. Job Expectations: The Team Member will work productively in a fast-paced environment, maintain a fast speed of service, interact with Guests, work closely with other Team Members to complete tasks, follow all safety and security procedures, and conduct other duties assigned by the Restaurant Management Team. Duties: • Follow the steps outlined in the DHC Training Program to learn new skills, duties, and responsibilities, • Abide by the rules and direction given by the Restaurant Management Team and refrain from insubordination, • Communicate to their immediate supervisor when additional training guidance and practice is needed, • Understand how each job responsibility impacts Guests, the Team, and overall Restaurant Operations and success, • Greet Guests, record orders, and serve food and beverages with a consistently positive and helpful attitude, including answering questions, • Work together with other Teammates to prepare items on the DHC menu while following cooking instructions, safety procedures, and sanitary requirements, • Communicate effectively with Team Members and Management to resolve any interpersonal issues as needed, • Use specific kitchen machinery/equipment such as ice cream dispensers, fryers, warmers, etc., • Ensure Restaurant cleanliness daily by clearing tables, sweeping, and mopping floors, washing/sanitizing/disinfecting kitchen utensils and high touch-point areas, and servicing restrooms, • Handle Guests’ concerns and complaints professionally and calmly to resolve problems according to Restaurant Policy, • Maintain a neat and tidy appearance by wearing a uniform and adhering to the DHC Uniform Policy, • Follows all company guidelines for food and cash controls; follows all cost control guidelines to maintain and minimize Restaurant costs and effectively uses all products, supplies, and equipment facilities, • Are performance-oriented and performance driven; understand performance expectations and are aware of performance results Requirements: • Current student or high school diploma/GED preferred, • Must be at least 18 years old, • Flexibility to work nights, weekends, holidays, opening and closing shifts, • Ability to stand for long periods of time and work in a fast-paced environment, • Ability to work in close quarters and around heat, • Positive attitude while conducting any and all duties, • Commitment to guest satisfaction. Looks at Restaurant operations from the Guest's point of view, • Effective communicator with Teammates and the Restaurant Management Team, • Excellent Time Management Skills Transportation & Accessibility: • Must have reliable transportation to work, • Must have telephone or other reliable method of communicating with Restaurant Management Team and Teammates"About Dave's Hot Chicken Dave’s Hot Chicken was created by best friends Dave Kopushyan, Arman Oganesyan, and Tommy and Gary Rubenyan. Dave, a chef trained in Thomas Keller’s (French Laundry) organization set out to create the perfect Hot Chicken by searching, tasting, and frying. The four friends scrounged up $900 to put a tiny stand in an East Hollywood parking lot. The menu was simple, and the chicken was the star. And what chicken it is! Sourced and prepared to be the juiciest and most tender imaginable with each piece topped with Dave’s own mix of spices ranging from No Spice to “The Reaper.” Arman created Instagram buzz and the lines began to grow. Two nights later, Eater/LA showed up to see what the fuss was about. The next morning's headline read ""East Hollywood's Late Night Chicken Stand Might Blow Your Mind."" Almost instantly, the lines stretched around the block. A year later, the boys had the money to open a shop in a hip strip-mall with décor by local street artists, where the crowds continued to grow with wait-times of an hour and more. From there, the incredibly craveable “Hot and Spicy” varieties have created a cult following with rave reviews across the U.S. and Canada."

Job DescriptionOur values start with our people, join a team that values you! Bring your talents to Ross, our leading off-price retail chain with over 2,200 stores, and a strong track record of success and growth. Our focus has always been bringing our customers a constant stream of high-quality brands and on-trend merchandise at extraordinary savings. All while providing a fun and exciting treasure hunt experience. As Part Of Our Team, You Will Experience: • Success. Our winning team pursues excellence while learning and evolving., • Career growth. We develop industry leading talent because Ross grows when our people grow., • Teamwork. We work together to solve the hard problems and find the right solution., • Our commitment to Diversity, Equality & Inclusion, and our community. We celebrate the backgrounds, identities, and ideas of those who work and shop with us because our differences make us stronger. We strive to be a positive force in our community. Our Corporate headquarters are in Dublin, CA, we have 3 buying offices in key markets in New York City, Los Angeles, and Boston, and 8 distribution centers nationwide. With 2025 revenues of $22.8 billion, we are a Fortune 500 company who is committed to providing an inclusive work environment with continuous learning opportunities and development for our teams. General Purpose: The Retail Associate is responsible for ensuring our Customers have a positive shopping experience. The Associate makes eye contact, smiles, and greets all Customers in a courteous and friendly manner, treats fellow Associates with respect, efficiently follows all company best practice standards as outlined in all work centers, maintains a clean work area at all times, and ensures proper merchandise presentation. The Retail Associate is expected to be engaged in these tasks as assigned during all working hours and will be expected to perform a range of functions in all areas of the Store as business needs require. The Associate may be requested to perform additional tasks in specific situations, if performance of these tasks will help achieve our Customer service and operational goals. Essential Functions: • Understands that safety is the number one priority and practices safe behaviors in everything they do., • Maintains a high level of awareness on the sales floor to create a safe and secure shopping environment for everyone. Maintains clutter free, clear egress to emergency exits. Immediately corrects or reports any unsafe conditions or practices to Store Leadership., • Treats all Customers and Associates with respect and courtesy; is friendly and professional at all times. Recognizes fellow Associates using Company recognition programs., • Assists Customers in any way necessary - is register-trained, assists Customers with merchandise, and answers Customer questions in a polite and knowledgeable manner. Greets all Customers by making eye contact, smiling and saying "hello" throughout the Store as well as saying "thank you" with every register transaction., • Provides prompt and efficient responses to Customers at all times. Responds to Customer Service calls immediately. Handles all Customer issues in a courteous and helpful way, calling a member of the Store Leadership when needed., • Represents and supports the Company brand at all times., • Performs cleaning tasks such as sweeping, mopping, dusting, wiping counters and mirrors, replenishing restroom supplies, and disinfecting high-touch areas including the front-end, sales floor and restrooms to help maintain merchandise, customer and Team areas., • Maintains a professional appearance and adheres to the Company's dress code at all times., • Performs cleaning tasks such as sweeping, mopping, dusting, wiping counters and mirrors, and replenishing restroom supplies to help maintain merchandise, customer and Team areas., • Performs daily assigned sizing and recovery per company best practice to ensure a neat, clean and organized store that is well-maintained and efficiently merchandised to standards., • Expedites newly received merchandise receipts to the sales floor with a sense of urgency, merchandising all items per company best practice to the monthly presentation guidelines and maintaining merchandise/brand name familiarity within departments to assist Customers., • Understands the Loss Prevention Awareness program, the Shortage Highway, the Store Protection Specialist (SPS) position (where applicable), and merchandise protection standards., • As a representative of Ross Inc., demonstrates integrity and honesty in all interactions with Associates and Customers. Safeguards confidential information, cash and credit card information, and merchandise., • Follows all Mark-Out-of-Stock (MOS) policies, including the identification of MOS merchandise, proper processing of each piece and the notification of Store Leadership to review and approve all disposals., • Follows all policies and procedures concerning cash, check, charge card and refund transactions, voids and offline procedures. Maintains a high level of awareness and accuracy when handling bankable tenders., • Demonstrates a sense of urgency to efficiently perform their role. Maximizes productivity by executing all Store best practices and minimizing steps and touches in their work flow. Competencies: • Manages Work Processes., • Business Acumen., • Plans, Aligns & Prioritizes., • Builds Talent., • Collaborates., • Leading by Example., • Communicates Effectively., • Ensures Accountability & Execution. Qualifications And Special Skills Required: • Effectively communicate with Customers, Associates and Store Leadership in a friendly, respectful, cooperative and pleasant manner., • Ability to perform basic mathematical calculations commonly used in retail environments. Physical Requirements/Ada: • Ability to use all Store equipment, including PDTs, registers and PC as required., • Ability to spend up to 100% of working time standing, walking, and moving around the Store., • Ability to regularly bend at the waist, squat, kneel, climb, carry, reach, and stoop., • Ability to occasionally push, pull and lift more than 25 pounds., • Ability to use janitorial equipment, rolling racks, ladders and other assigned supplies., • Certain assignments may require other qualifications and skills., • Associates who work Stockroom shifts: Ability to regularly push, pull and lift more than 20 pounds. Supervisory Responsibilities: None DISCLAIMER: This job description is a summary of the primary duties and responsibilities of the job and position. It is not intended to be a comprehensive or all-inclusive listing of duties and responsibilities. Contents are subject to change at management's discretion. Ross is an equal employment opportunity employer. We consider individuals for employment or promotion according to their skills, abilities and experience. We believe that it is an essential part of the Company's overall commitment to attract, hire and develop a strong, talented and diverse workforce. Ross is committed to complying with all applicable laws prohibiting discrimination based on race, color, religious creed, age, national origin, ancestry, physical, mental or developmental disability, sex (which includes pregnancy, childbirth, breastfeeding and medical conditions related to pregnancy, childbirth or breastfeeding), veteran status, military status, marital or registered domestic partnership status, medical condition (including cancer or genetic characteristics), genetic information, gender, gender identity, gender expression, sexual orientation, as well as any other category protected by federal, state or local laws. The base pay range for this role is $16.60 - $17.10. The base pay range is dependent on factors including, but not limited to, experience, skills, qualifications, relevant education, certifications, seniority, and location. The range listed is just one component of the total compensation package for employees. Other rewards vary by position and location. Benefits offered to all Associates include Accident, Critical Illness, Vision, Auto, Home, and Pet insurance programs; Associate Discount, Identity Protection, Associate Purchase Program, Benefit Hub Discount Mall, Employee Assistance Program and Commuter Benefits, 401K (service requirements), Employee Stock Purchase Program, Ross Cares Fund, College Discounts, Sick Pay (where legally required) and Referral Bonuses. In addition, all Full-Time Associates, including FT Retail Associate, Area Supervisor, Assistant Store Manager and Store Manager, are eligible for extended benefits offered including Medical/Dental/Vision Health Insurance, Legal Insurance, Vacation Buy, Flexible Spending Account, Health Savings Account, Life/ADD Insurance, Long-Term Disability, Enhanced Maternity and Parental Leave Benefit, Vacation Pay accrued at a rate of 10 days/year after eligibility commences, 9 Personal and Company Holidays. AS, ASM and SM Associates in Stores and Exempt Corporate and Buying Office roles are also eligible to receive a Bonus based on individual and business performance.

Job Description Job Title: Molding Setup Technician (Extrusion Blow Molding) Location: Rochester, NY Schedule: Days – Monday to Friday; typical shifts: 7am–4pm or 8am–5pm) Pay $25 Job Summary: The Molding Setup Technician is responsible for setting up, adjusting, and maintaining extrusion blow molding machines to ensure efficient production of high-quality plastic parts. This role involves installing molds, troubleshooting process issues, and working safely to support smooth manufacturing operations. Key Responsibilities: • Set up and start various molding machines according to production schedules., • Install and remove molds with proper alignment and connections., • Adjust machine parameters (temperature, pressure, cycle time, etc.) for optimal performance., • Perform first-piece inspections to ensure product quality standards are met., • Troubleshoot molding and process issues to minimize production downtime., • Monitor machine performance and implement adjustments during production as needed., • Conduct routine maintenance on molds and related equipment., • Comply with all safety standards and company procedures., • Accurately maintain production and setup documentation., • Collaborate with quality, maintenance, and production teams to support overall plant operations. Required Qualifications: • High school diploma or GED, • Experience with molding machines and tooling, • Strong mechanical aptitude and troubleshooting skills, • Knowledge of plastics materials and molding processes Preferred Qualifications: • 2+ years of molding setup or processing experience, ideally with extrusion blow molding, • Familiarity with robotics and automation systems, • Basic understanding of hydraulics, pneumatics, and electrical systems Additional Information: Shift hours and compensation will be discussed during the interview process. We invite qualified candidates seeking a dynamic role in manufacturing to apply. As part of our promise to talent, Kelly supports those who work with us through a variety of benefits, perks, and work-related resources. Kelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. As a Kelly employee, you will have access to a retirement savings plan, service bonus and holiday pay plans (earn up to eight paid holidays per benefit year), and a transit spending account. In addition, employees are entitled to earn paid sick leave under the applicable state or local plan. Click here for more information on benefits and perks that may be available to you as a member of the Kelly Talent Community. Get a complete career fit with Kelly®. You’re looking to keep your career moving onward and upward, and we’re here to help you do just that. Our staffing experts connect you with top companies for opportunities where you can learn, grow, and thrive. Jobs that fit your skills and experience, and most importantly, fit right on your path of where you want to go in your career. About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Kelly may use AI-powered tools during the recruitment and hiring process. For full details, including how Kelly uses AI, your rights, and how to request a reasonable accommodation, visit the Recruitment Artificial Intelligence Notice.

American Traveler is seeking a travel Registered Respiratory Therapist for a travel job in Rochester, New York. • Specialty: Registered Respiratory Therapist, • Discipline: Allied Health Professional, • Start Date: 06/29/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights, • Employment Type: Travel, • Shift: Nights, 3x12hrs, • Hours: 36 hrs/wk, • Start Date: Jun 29, 2026, • Length: 13 weeks, • Openings: 1 American Traveler is seeking a Registered Respiratory Therapist (RRT) with at least 1 year of experience for a 13-week night shift contract in an adult critical care setting, with proficiency in Epic and hands-on ventilator management skills. • 13-week travel contract, • Night shift schedule, 3x12-hour shifts (19:00–07:30), • 4 rotating weekend shifts per month, • On-call required, • Adult critical care and emergency department setting, • Patient diagnoses include CHF, COPD, pneumonia, respiratory failure, and respiratory infections, • Specialized procedures include ABG sampling, ventilator management, patient assessment, medication administration, and pulmonary hygiene, • Equipment includes Hamilton Vent, Servo-U, NKV330, and V60 ventilators, • Epic EMR preferred, • Candidates living within 50 miles of the facility are eligible as local candidates, • Active RRT credential required, • BLS certification required, • Active state license required if applicable, • Minimum 1 year of respiratory therapy experience, • Proficiency in Epic EMR, • Experience with adult critical care and emergency department settings, • Skills required: extubation, intubation assist, nasal/oral airway placement and suctioning, sputum specimen collection, ETT/NT suctioning, tracheostomy care and management, bag-mask ventilation, HFNC, BiPAP, CPAP, T-piece, trach collar, troubleshooting high-pressure alarms, weaning from mechanical ventilation, and long-term care, • 2 professional references from a supervisor within the past 2 years, • Full 7-year work history with all gaps explained, • First-time travelers are accepted for this position, • Any time off or scheduling requests must be submitted at the time of initial consideration, • Call-off policy allows up to 3 shifts per 13-week assignment; shifts placed on-call in lieu of being called off count toward this total American Traveler Job ID #P-716292. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Travel Respiratory Therapist - Registered RT/RRT With over 25 years of experience, American Traveler has established a reputation for outstanding customer service. Our team ensures a smooth, worry-free experience for those starting on or expanding their travel nursing and allied careers. With thousands of travel nursing and allied jobs nationwide, our attentive and approachable recruiters find positions that align perfectly with your career aspirations and personal requirements. American Traveler offers exceptional benefits, including premium medical, dental, vision and life insurance beginning day one of your assignment, generous 401(k) match, substantial housing stipends, and more. Additionally, with 24/7 support and access to our in-house clinicians, you are assured confidence and comfort throughout your assignment. With our team behind you, you can relax and enjoy a rewarding travel career.

Cannon Industries, a global company headquartered in Rochester, New York, has established itself as a leading sheet metal and custom weld fabricator in the contract manufacturing industry. Our quality standards are unmatched in the industry, driven by computer-controlled processes, experienced operators and technicians, and strict quality control procedures. We have earned QS:9000, ISO:9002, and TS:16949 certifications. Cannon Industries, Inc. maintains a drug, smoke, and alcohol-free working environment. Sets up and operates punch press including blanking, drawing, forming, perforating, etc. Controls proper safety devices, feeds the material into dies and keeps stock well lubricated. Procures proper dies, sets up punch presses and feeds for all types of materials. All types of dies may be set up including compound, multiple, closing, trimming, shearing, drawing, perforating, cut-off, shimmy, coining, extruding, etc. • Ability to read blueprints a must., • Fluency in verbal and written English, • Ability to use shop math, • High school diploma, GED or equivalent, • Must supply own tools, • Must be able to lift up to 50 lbs. regularly, • Requires frequent bending, stooping, squatting, pushing and pulling of parts and part containers, • May be required to stand for long periods of time, • May involve repetitive motions, • Due to open environment of warehouse, must be able to work in various weather and temperature conditions to include extreme heat, humidity and cold, • Ensure Punch Press is in full operation during the required work hours, • Inspect material; checking for type and measuring dimensions using a micrometer and a QA tag., • Shear material using a "Traveler", • Make the part according to specifications on dimension and quantity, • Measure blank or strip using measurement tape or dial caliper, • Use shearing machine as per drawing or instructions, • Set up the punch press (under supervision if necessary) and punch first part, • Ensure that inspection of first and last piece is done by operator and QA, • Run job and check parts using SPC, • Tumble parts and remove burrs, • Spot weld parts, if necessary, • Inspect part according to print, • Get QA approval of part., • Manufacture and inspect part to blueprint, • Upkeep daily preventative maintenance log, • 6" Verniers, • Tape Measure, • Ball Peen Hammer, • Set Allen Wrenches This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Job Description Summary: The PM Manager supports the Assistant General Manager and General Manager in the daily responsibilities required to keep the business running smoothly. The PM Manager directs employees and ensures that work is being completed in a timely and effective manner. Job Expectations: The PM Manager performs Leadership, Management, and Organizational tasks while supervising fellow Teammates, monitoring their performance, to ensure they comply with company and safety policies, and delegate tasks appropriately. Duties: • Follow the steps outlined in the DHC Training Program to learn and train new skills, duties, and responsibilities, • Abide by and enforce to the rules and direction given by the Restaurant Management Team and refrains from insubordination, • Communicate to their immediate Supervisor when additional training guidance and practice is needed, • Effectively and consistently does required Ops Walks and Q&A checks to correct areas of opportunity, • Organize shift schedules for Team Members and monitor attendance, tardiness, and time off, • Assign duties to specific Team Members based on role and skills, • Understand how each job responsibility impacts Guests, the Team, and overall Restaurant Operations and success, • Greet Guests, record orders, and serve food and beverages with a consistently positive and helpful attitude, including answering questions, • Ensure Shift Leaders and Team Members work together with their Teammates to prepare items on the DHC menu while following cooking instructions, safety procedures, and sanitary requirements, • Use specific kitchen machinery/equipment such as ice cream dispensers, fryers, warmers, etc., • Ensure Restaurant cleanliness is conducted daily by delegating the clearing of tables, sweeping, and mopping floors, washing/sanitizing/disinfecting kitchen utensils and high touch-point areas, and servicing restrooms, • Handle Guests’ concerns and complaints professionally and calmly to resolve problems according to Restaurant Policy, • Maintain a neat and tidy appearance by wearing a uniform and adhering to the DHC Uniform Policy, • Are performance-oriented and performance driven; understand performance expectations and are aware of performance, • results, • Provide direction, supervision, and feedback to maintain levels of high productivity and Team morale, • Communicate Shift Leader and Team Member work performance to the Restaurant Management Team and appropriately address performance issues, • Train new and current Team Members, • Balance cash drawers and prepare cash deposits as assigned by the Restaurant Management Team, • Assist the Assistant General Manager & General Manager as directed, • Effectively plan, organize, and implement all daily operational routines and activities alongside the Shift Leader, • Complete all required administrative duties and daily paperwork including required checklists, • Supervise and perform closing and/or opening activities as directed by the Restaurant Management Team, • Establish an environment of trust to ensure honest, open, and direct communication, • Role model and set a positive example for the entire Team in all aspects of business and personnel practices, • Follows all company guidelines for food and cash controls; follows all cost control guidelines to maintain and minimize Restaurant costs; properly uses all products, supplies, and equipment facilities, • Communicate effectively with Shift Leaders, Team Members and Management to resolve any interpersonal issues as needed Requirements: • Must be at least 18 years old and fluent in English, • Certified in all stations as a Shift Leader following the DHC Training Program, • Flexibility to work nights, weekends, holidays, closing shifts (4pm till close), • Ability to work in a fast-paced environment, • Positive attitude while conducting any and all duties, • Commitment to Guest satisfaction. Looks at Restaurant Operations from a Guest’s point of view, • Effective communicator with co-workers and the Restaurant Management Team, • Excellent organization, planning, time management, delegation, and problem-solving skills Transportation & Accessibility: • Must have reliable transportation to work, a driver’s license and proof of insurance, • Must have telephone or other reliable method of communicating with Restaurant Management Team and co-workers"About Dave's Hot Chicken Dave’s Hot Chicken was created by best friends Dave Kopushyan, Arman Oganesyan, and Tommy and Gary Rubenyan. Dave, a chef trained in Thomas Keller’s (French Laundry) organization set out to create the perfect Hot Chicken by searching, tasting, and frying. The four friends scrounged up $900 to put a tiny stand in an East Hollywood parking lot. The menu was simple, and the chicken was the star. And what chicken it is! Sourced and prepared to be the juiciest and most tender imaginable with each piece topped with Dave’s own mix of spices ranging from No Spice to “The Reaper.” Arman created Instagram buzz and the lines began to grow. Two nights later, Eater/LA showed up to see what the fuss was about. The next morning's headline read ""East Hollywood's Late Night Chicken Stand Might Blow Your Mind."" Almost instantly, the lines stretched around the block. A year later, the boys had the money to open a shop in a hip strip-mall with décor by local street artists, where the crowds continued to grow with wait-times of an hour and more. From there, the incredibly craveable “Hot and Spicy” varieties have created a cult following with rave reviews across the U.S. and Canada."

Job Description Summary: The PM Manager supports the Assistant General Manager and General Manager in the daily responsibilities required to keep the business running smoothly. The PM Manager directs employees and ensures that work is being completed in a timely and effective manner. Job Expectations: The PM Manager performs Leadership, Management, and Organizational tasks while supervising fellow Teammates, monitoring their performance, to ensure they comply with company and safety policies, and delegate tasks appropriately. Duties: • Follow the steps outlined in the DHC Training Program to learn and train new skills, duties, and responsibilities, • Abide by and enforce to the rules and direction given by the Restaurant Management Team and refrains from insubordination, • Communicate to their immediate Supervisor when additional training guidance and practice is needed, • Effectively and consistently does required Ops Walks and Q&A checks to correct areas of opportunity, • Organize shift schedules for Team Members and monitor attendance, tardiness, and time off, • Assign duties to specific Team Members based on role and skills, • Understand how each job responsibility impacts Guests, the Team, and overall Restaurant Operations and success, • Greet Guests, record orders, and serve food and beverages with a consistently positive and helpful attitude, including answering questions, • Ensure Shift Leaders and Team Members work together with their Teammates to prepare items on the DHC menu while following cooking instructions, safety procedures, and sanitary requirements, • Use specific kitchen machinery/equipment such as ice cream dispensers, fryers, warmers, etc., • Ensure Restaurant cleanliness is conducted daily by delegating the clearing of tables, sweeping, and mopping floors, washing/sanitizing/disinfecting kitchen utensils and high touch-point areas, and servicing restrooms, • Handle Guests’ concerns and complaints professionally and calmly to resolve problems according to Restaurant Policy, • Maintain a neat and tidy appearance by wearing a uniform and adhering to the DHC Uniform Policy, • Are performance-oriented and performance driven; understand performance expectations and are aware of performance, • results, • Provide direction, supervision, and feedback to maintain levels of high productivity and Team morale, • Communicate Shift Leader and Team Member work performance to the Restaurant Management Team and appropriately address performance issues, • Train new and current Team Members, • Balance cash drawers and prepare cash deposits as assigned by the Restaurant Management Team, • Assist the Assistant General Manager & General Manager as directed, • Effectively plan, organize, and implement all daily operational routines and activities alongside the Shift Leader, • Complete all required administrative duties and daily paperwork including required checklists, • Supervise and perform closing and/or opening activities as directed by the Restaurant Management Team, • Establish an environment of trust to ensure honest, open, and direct communication, • Role model and set a positive example for the entire Team in all aspects of business and personnel practices, • Follows all company guidelines for food and cash controls; follows all cost control guidelines to maintain and minimize Restaurant costs; properly uses all products, supplies, and equipment facilities, • Communicate effectively with Shift Leaders, Team Members and Management to resolve any interpersonal issues as needed Requirements: • Must be at least 18 years old and fluent in English, • Certified in all stations as a Shift Leader following the DHC Training Program, • Flexibility to work nights, weekends, holidays, closing shifts (4pm till close), • Ability to work in a fast-paced environment, • Positive attitude while conducting any and all duties, • Commitment to Guest satisfaction. Looks at Restaurant Operations from a Guest’s point of view, • Effective communicator with co-workers and the Restaurant Management Team, • Excellent organization, planning, time management, delegation, and problem-solving skills Transportation & Accessibility: • Must have reliable transportation to work, a driver’s license and proof of insurance, • Must have telephone or other reliable method of communicating with Restaurant Management Team and co-workers"About Dave's Hot Chicken Dave’s Hot Chicken was created by best friends Dave Kopushyan, Arman Oganesyan, and Tommy and Gary Rubenyan. Dave, a chef trained in Thomas Keller’s (French Laundry) organization set out to create the perfect Hot Chicken by searching, tasting, and frying. The four friends scrounged up $900 to put a tiny stand in an East Hollywood parking lot. The menu was simple, and the chicken was the star. And what chicken it is! Sourced and prepared to be the juiciest and most tender imaginable with each piece topped with Dave’s own mix of spices ranging from No Spice to “The Reaper.” Arman created Instagram buzz and the lines began to grow. Two nights later, Eater/LA showed up to see what the fuss was about. The next morning's headline read ""East Hollywood's Late Night Chicken Stand Might Blow Your Mind."" Almost instantly, the lines stretched around the block. A year later, the boys had the money to open a shop in a hip strip-mall with décor by local street artists, where the crowds continued to grow with wait-times of an hour and more. From there, the incredibly craveable “Hot and Spicy” varieties have created a cult following with rave reviews across the U.S. and Canada."

Job Description Seal & Design, Inc. is a family owned company founded and located in Clarence, NY with three divisions located across the U.S. and Canada. Our product line includes gaskets, o-rings, seals, molded products, die-cut foams, and many other specific products for all kinds of sealing applications. We provide superior products to our customers across many industries, including: Automotive, Medical, Military, Aerospace, Electronics, Power Generation, Hydraulics, and HVAC. Supervises, coaches, and trains Production Associates to ensure efficient operation of machines through work planning and assignment, job set-up, material selection, tool, machine and facility maintenance and problem solving. Pay Range: $25-$30/hour · LMA - Leads, Manages and holds accountable all direct reports o Actively participates in the vetting, selection and onboarding process o Monitors efficiency and productivity to ensure expectations are met or exceeded o Provides training on equipment o Provides hands-on trouble shooting assistance o Communicates the daily schedule via daily huddles o Conducts regular coaching (formal and JIT) o Conducts performance reviews and facilitates disciplinary actions as necessary · Meets or exceeds department KPI’s o Safety, Quality, Efficiency, 5S · Facilitates continuous improvement processes to create efficiency and reduce costs · Effectively utilizes MRP software for planning and scheduling · Sets up jobs in accordance with departmental needs to ensure maximum efficiency and quality · Limits job write offs with regards to material and equipment usage · Ensures that all materials are available and ready for fabrication at the machine location · Performs first-piece inspection for all new fabrication runs, when necessary · Qualifies first-piece fabrication product and performs random quality checks as indicated by the quality specifications; has the authority to stop production when needed to correct quality problems · Completes routine auditing and inspection of shop floor activities to ensure compliance with manufacturing, customer and quality requirements · Initiates the non-conformance process; identifies preventive actions and continual improvement opportunities · Interfaces with Sales Department to understand all dimensional and customer specifications in order to resolve any issues and updates to specific requirements · Ensures that dies are maintained and stored properly; moves dies between equipment and die racks · Ensures that preventative maintenance is current and performs maintenance functions as necessary · Enforces safety policies and practices to ensure culture of health and safety; identifies safety hazards and works with management team on corrective actions Requirements · Associates degree (AA) in a technical discipline and 1-2 years related experience, or equivalent combination of education and experience · Proficiency working in a computer supported environment with business software and Microsoft office programs · Ability to read and interpret blueprints, use simple math and use basic hand-held measuring tools · Mechanical/technical aptitude · Excellent written and verbal communication skills · Strong organizational, problem-solving, and analytical skills; able to manage priorities and workflow; able to multi-task · Versatility, flexibility, and a willingness to work within constantly changing priorities with enthusiasm COMPANY CORE VALUES: S SELF-MOTIVATED – Take initiative and ownership; strive for excellence E ENGAGED – Leverage your individual talents to embrace the vision; practice teamwork and deliver results A ADAPTABLE – Challenge the status quo to continually improve and conquer problems and opportunities L LOYAL – Stay resolute to our cause of serving customers and our team S SINCERE – Honor commitments; respect deadlines; do what you said you would do when you said you would do it; live the golden rule JOB COMPETENCIES: · Leadership · Performance Management · Results Driven · Problem Solving · Communication Proficiency · Time Management · Critical Thinking · Planning and Organizing · Technical Capacity PHYSICAL REQUIREMENTS: · Continual use of hands; constant standing, walking, reaching, bending and lifting · Clear close vision and ability to identify and distinguish color variations · Ability to lift up to 50 lbs. Benefits • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Referral program, • Vision insurance

Job Description Shift Leader - Dave's Hot Chicken in Irondequoit, NY * $19 an hour starting wage, plus Huge Growth Opportunity Summary: The Shift Leader is responsible and accountable for all Restaurant activities while on duty. The Shift Leader will work with the Restaurant Management Team to ensure all activities are consistent with and supportive of the Restaurant’s business plan. They will ensure all Team Members are performing their job responsibilities and meeting expectations. Job Expectations: The Shift Leader performs Leadership, Management, and Organizational tasks while supervising fellow Teammates, monitoring their performance, to ensure they comply with company and safety policies, and delegate tasks appropriately. Duties: • Follow the steps outlined in the DHC Training Program to learn and train new skills, duties, and responsibilities, • Abide by and enforce to the rules and direction given by the Restaurant Management Team and refrains from insubordination, • Communicate to their immediate Supervisor when additional training guidance and practice is needed, • Effectively and consistently does required Ops Walks and Q&A checks to correct areas of opportunity, • Organize shift schedules for Team Members and monitor attendance, tardiness, and time off, • Assign duties to specific Team Members based on role and skills, • Understand how each job responsibility impacts Guests, the Team, and overall Restaurant Operations and success, • Greet Guests, record orders, and serve food and beverages with a consistently positive and helpful attitude, including answering questions, • Ensure Team Members work together with their Teammates to prepare items on the DHC menu while following cooking instructions, safety procedures, and sanitary requirements, • Use specific kitchen machinery/equipment such as ice cream dispensers, fryers, warmers, etc., • Ensure Restaurant cleanliness is conducted daily by delegating the clearing of tables, sweeping, and mopping floors, washing/sanitizing/disinfecting kitchen utensils and high touch-point areas, and servicing restrooms, • Handle Guests’ concerns and complaints professionally and calmly to resolve problems according to Restaurant Policy, • Maintain a neat and tidy appearance by wearing a uniform and adhering to the DHC Uniform Policy, • Are performance-oriented and performance driven; understand performance expectations and are aware of performance results, • Provide direction, supervision, and feedback to maintain levels of high productivity and Team morale, • Communicate Team Member work performance to the Restaurant Management team and appropriately address performance issues, • Train new and current Team Members on tasks, • Balance cash drawers and prepare cash deposits as assigned by the Restaurant Management Team, • Effectively plan, organize, and implement all daily operational routines and activities, • Complete all required administrative duties and daily paperwork including required checklists, • Supervise and perform closing and/or opening activities as directed by the Restaurant Management Team, • Effectively plan, organize, and implement all daily operational routines and activities, • Establish an environment of trust to ensure honest, open, and direct communication, • Role model and set a positive example for the entire Team in all aspects of business and personnel practices, • Follows all company guidelines for food and cash controls; follows all cost control guidelines to maintain and minimize Restaurant costs; properly uses all products, supplies, and equipment facilities, • Communicate effectively with Team Members and Management to resolve any interpersonal issues as needed Requirements: • Current student or high school diploma/GED preferred, • Must be at least 18 years old and fluent in English, • Certified in all stations following the DHC Training Program, • Flexibility to work nights, weekends, holidays, opening and closing shifts, • Ability to stand for long periods of time and work in a fast-paced environment, • Ability to work in close quarters and around heat, • Positive attitude while conducting any and all duties, • Commitment to Guest satisfaction. Looks at Restaurant Operations from a Guest’s point of view., • Effective communicator with co-workers and the Restaurant Management Team, • Excellent organization, planning, time management, delegation, and problem-solving skills Transportation & Accessibility: • Must have reliable transportation to work, a driver’s license and proof of insurance, • Must have telephone or other reliable method of communicating with supervisor and co-workers"About Dave's Hot Chicken Dave’s Hot Chicken was created by best friends Dave Kopushyan, Arman Oganesyan, and Tommy and Gary Rubenyan. Dave, a chef trained in Thomas Keller’s (French Laundry) organization set out to create the perfect Hot Chicken by searching, tasting, and frying. The four friends scrounged up $900 to put a tiny stand in an East Hollywood parking lot. The menu was simple, and the chicken was the star. And what chicken it is! Sourced and prepared to be the juiciest and most tender imaginable with each piece topped with Dave’s own mix of spices ranging from No Spice to “The Reaper.” Arman created Instagram buzz and the lines began to grow. Two nights later, Eater/LA showed up to see what the fuss was about. The next morning's headline read ""East Hollywood's Late Night Chicken Stand Might Blow Your Mind."" Almost instantly, the lines stretched around the block. A year later, the boys had the money to open a shop in a hip strip-mall with décor by local street artists, where the crowds continued to grow with wait-times of an hour and more. From there, the incredibly craveable “Hot and Spicy” varieties have created a cult following with rave reviews across the U.S. and Canada."

Job Description Dave's Hot Chicken in Henrietta Now Hiring Shift Leaders Starting at $19 an hour with Immediate Growth Opportunities Summary: The Shift Leader is responsible and accountable for all Restaurant activities while on duty. The Shift Leader will work with the Restaurant Management Team to ensure all activities are consistent with and supportive of the Restaurant’s business plan. They will ensure all Team Members are performing their job responsibilities and meeting expectations. Job Expectations: The Shift Leader performs Leadership, Management, and Organizational tasks while supervising fellow Teammates, monitoring their performance, to ensure they comply with company and safety policies, and delegate tasks appropriately. Duties: • Follow the steps outlined in the DHC Training Program to learn and train new skills, duties, and responsibilities, • Abide by and enforce to the rules and direction given by the Restaurant Management Team and refrains from insubordination, • Communicate to their immediate Supervisor when additional training guidance and practice is needed, • Effectively and consistently does required Ops Walks and Q&A checks to correct areas of opportunity, • Organize shift schedules for Team Members and monitor attendance, tardiness, and time off, • Assign duties to specific Team Members based on role and skills, • Understand how each job responsibility impacts Guests, the Team, and overall Restaurant Operations and success, • Greet Guests, record orders, and serve food and beverages with a consistently positive and helpful attitude, including answering questions, • Ensure Team Members work together with their Teammates to prepare items on the DHC menu while following cooking instructions, safety procedures, and sanitary requirements, • Use specific kitchen machinery/equipment such as ice cream dispensers, fryers, warmers, etc., • Ensure Restaurant cleanliness is conducted daily by delegating the clearing of tables, sweeping, and mopping floors, washing/sanitizing/disinfecting kitchen utensils and high touch-point areas, and servicing restrooms, • Handle Guests’ concerns and complaints professionally and calmly to resolve problems according to Restaurant Policy, • Maintain a neat and tidy appearance by wearing a uniform and adhering to the DHC Uniform Policy, • Are performance-oriented and performance driven; understand performance expectations and are aware of performance results, • Provide direction, supervision, and feedback to maintain levels of high productivity and Team morale, • Communicate Team Member work performance to the Restaurant Management team and appropriately address performance issues, • Train new and current Team Members on tasks, • Balance cash drawers and prepare cash deposits as assigned by the Restaurant Management Team, • Effectively plan, organize, and implement all daily operational routines and activities, • Complete all required administrative duties and daily paperwork including required checklists, • Supervise and perform closing and/or opening activities as directed by the Restaurant Management Team, • Effectively plan, organize, and implement all daily operational routines and activities, • Establish an environment of trust to ensure honest, open, and direct communication, • Role model and set a positive example for the entire Team in all aspects of business and personnel practices, • Follows all company guidelines for food and cash controls; follows all cost control guidelines to maintain and minimize Restaurant costs; properly uses all products, supplies, and equipment facilities, • Communicate effectively with Team Members and Management to resolve any interpersonal issues as needed Requirements: • Must be at least 18 years old and fluent in English, • Certified in all stations following the DHC Training Program, • Flexibility to work nights, weekends, holidays, opening and closing shifts, • Ability to stand for long periods of time and work in a fast-paced environment, • Ability to work in close quarters and around heat, • Positive attitude while conducting any and all duties, • Commitment to Guest satisfaction. Looks at Restaurant Operations from a Guest’s point of view., • Effective communicator with co-workers and the Restaurant Management Team, • Excellent organization, planning, time management, delegation, and problem-solving skills Transportation & Accessibility: • Must have reliable transportation to work, a driver’s license and proof of insurance, • Must have telephone or other reliable method of communicating with supervisor and co-workers"About Dave's Hot Chicken Dave’s Hot Chicken was created by best friends Dave Kopushyan, Arman Oganesyan, and Tommy and Gary Rubenyan. Dave, a chef trained in Thomas Keller’s (French Laundry) organization set out to create the perfect Hot Chicken by searching, tasting, and frying. The four friends scrounged up $900 to put a tiny stand in an East Hollywood parking lot. The menu was simple, and the chicken was the star. And what chicken it is! Sourced and prepared to be the juiciest and most tender imaginable with each piece topped with Dave’s own mix of spices ranging from No Spice to “The Reaper.” Arman created Instagram buzz and the lines began to grow. Two nights later, Eater/LA showed up to see what the fuss was about. The next morning's headline read ""East Hollywood's Late Night Chicken Stand Might Blow Your Mind."" Almost instantly, the lines stretched around the block. A year later, the boys had the money to open a shop in a hip strip-mall with décor by local street artists, where the crowds continued to grow with wait-times of an hour and more. From there, the incredibly craveable “Hot and Spicy” varieties have created a cult following with rave reviews across the U.S. and Canada."