Ppe jobs in Buffalo, New YorkCreate job alerts

The Maintenance Worker II is responsible for performing a variety of work including the maintenance and repair of buildings and grounds in assigned area(s). Essential functions and responsibilities of the position may vary by Aramark location based on client requirements and business needs. COMPENSATION: The Hourly rate for this position is $19.00 to $21.00. If both numbers are the same, that is the amount that Aramark expects to offer. This is Aramark?s good faith and reasonable estimate of the compensation for this position as of the time of posting. BENEFITS: Aramark offers comprehensive benefit programs and services for eligible employees including medical, dental, vision, and work/life resources. Additional benefits may include retirement savings plans like 401(k) and paid days off such as parental leave and disability coverage. Benefits vary by location and are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works. For more information about Aramark benefits, click here ___ There is no predetermined application window for this position, the position will close once a qualified candidate is selected. Qualified applicants with arrest or conviction records will be considered for employment in accordance with all applicable laws, including, but not limited to all applicable Fair Chance Ordinances and Acts. For jobs in San Francisco, this includes the San Francisco Fair Chance Ordinance. ? Inspects assigned area on a routine basis and performs maintenance where necessary to keep facility in functioning and serviceable condition ? Completes daily, weekly, or monthly checklists of pre-scheduled building and equipment maintenance procedures ? Repairs various fixtures and hardware such as doors, windows, minor appliances, office equipment, etc. ? Reports any major maintenance needs and recommends corrective action as appropriate ? Adheres to Aramark safety policies and procedures ? Other duties and task as assigned by manager At Aramark, developing new skills and doing what it takes to get the job done make a positive impact for our employees and for our customers. In order to meet our commitments, job duties may change or new ones may be assigned without formal notice. ? Previous maintenance experience preferred ? Must be able to follow basic safety procedures and precautions due to physical risks ? Demonstrates interpersonal and communication skills, both written and verbal ? Must be available to work flexible hours including evenings and weekends This role may have physical demands including, but not limited to, lifting, bending, pushing, pulling and/or extended walking and standing. This role may also require uniforms and/or usage of Personal Protective equipment (PPE). Our Mission Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. At Aramark, we believe that every employee should enjoy equal employment opportunity and be free to participate in all aspects of the company. We do not discriminate on the basis of race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status or other characteristics protected by applicable law. About Aramark The people of Aramark proudly serve millions of guests every day through food and facilities in 15 countries around the world. Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, no matter what you're pursuing - a new challenge, a sense of belonging, or just a great place to work - our focus is helping you reach your full potential. Learn more about working here at ___ or connect with us on ___, ___ and ___.

Aramark Healthcare+ is seeking candidates for a General Manager, Plant Operations & Maintenance or Sr. Director of POM at Catholic Health Mercy Buffalo Hospital, located in Buffalo, NY. The General Manager of POM (Facilities) plans, administers and directs all activities related to the Engineering department and will have client financial accountability, and be in compliance with the standards established by Aramark and the client. Establishes and maintains effective working relationships with other departments to provide a unified approach to POM management. Responsible for the development & growth of a large management team and hourly associates. Will also focus on meeting and exceeding operating and financial goals, client objectives, KPI metrics, and customer needs. Will have daily interaction with the client, client's customers and employees. This individual will be focused on ensuring operational excellence in the delivery of the services Aramark is contracted to provide. COMPENSATION: The hourly rate for this position is $86,500.00 to $151,375.00. If both numbers are the same, that is the amount that Aramark expects to offer. This is Aramark?s good faith and reasonable estimate of the compensation for this position as of the time of posting. BENEFITS: Aramark offers comprehensive benefit programs and services for eligible employees including medical, dental, vision, and work/life resources. Additional benefits may include retirement savings plans like 401(k) and paid days off such as parental leave and disability coverage. Benefits vary by location and are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works. For more information about Aramark benefits, click here ______. There is no predetermined application window for this position, the position will close once a qualified candidate is selected. Qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable law, including, but not limited to, the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and the San Francisco Fair Chance Ordinance to the extent that those laws apply to the opportunity. .? • Manage a large POM department, • Manage all facets of the organization including full P&L responsibility and controlling assets with operating revenue, and will manage labor costs, supply costs and inventories, • Complete and approve weekly and monthly financial operating reports, • Order, maintain, and use capital equipment efficiently, • Ensures compliance with all contract obligations, • Ensures the effective implementation of the comprehensive Safety Plan, driving full compliance of all safety rules, guidelines and protocols, • Optimize financial performance, process accuracy and logistics productivity by conducting operational audits and ensuring a high level of execution and compliance, • Drive operational efficiencies, labor/scheduling productivity, • Drive a positive work environment and utilize effective communication skills at all levels of the organization, • Provide overall direction and control to a large/complex account to achieve operating and financial goals, • Responsible for the training, development and performance management of personnel, operations managers and associates, • Deliver strong operational performance by ensuring compliance with Aramark Facilities Services and regulatory agency standards and programs and translating corporate strategy into front line operational tactics and will ensure compliance with all OSHA regulations and other, local, state, and federal government regulations, • Lead development of team ensuring high performance, talent succession planning, optimal staffing and employee engagement, • Establishes and maintains effective communications and business relationships with clients/customers, • Ensure that client objectives are fully met by maintaining active customer relationships including formal structured monthly business reviews In order to be prepared for this leadership role, qualified candidates will possess: • Bachelor?s degree or equivalent experience, • CHFM - Certified Healthcare Facilities Manager preferred, • Minimum 5 to 7 years of experience in Facilities or POM management required, • Acute Care Hospital experience required, • Knowledge of facility related equipment, financial analysis and interpretation required, • Working knowledge of appropriate preventative maintenance of building systems including MEP, boilers, chillers, generators & HVAC/R equipment, • Knowledgeable of all regulatory compliance requirements including OSHA, DOH, CMS, Joint Commission, Life Safety and Environment of Care, • Ability to lead a union workforce preferred, • Previous construction management experience highly preferred, • Prior experience in mentoring and developing management level staff is required, as is experience leading an hourly team, • Demonstrated time management skills, resulting in the ability to manage multiple client relationships and prioritize time and resources accordingly., • Ideal candidates will possess a high energy level that is communicated to the team they will lead, • Demonstrate proven success in interfacing with a variety of organizational functions and considerable negotiation skills are also needed to drive results., • The ability to manage in a diverse environment with focus on client and customer services is a key success measure, • Highly developed interpersonal, analytical and communication (written and verbal) skills and experience are essential for success in this role, • Candidates must possess a demonstrated attention to detail and ability to lead directly and through influence This role may have physical demands including, but not limited to, lifting, bending, pushing, pulling and/or extended walking and standing. This role may also require uniforms and/or usage of Personal Protective Equipment (PPE). Our Mission Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. At Aramark, we believe that every employee should enjoy equal employment opportunity and be free to participate in all aspects of the company. We do not discriminate on the basis of race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status or other characteristics protected by applicable law. About Aramark The people of Aramark proudly serve millions of guests every day through food and facilities in 15 countries around the world. Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, no matter what you're pursuing - a new challenge, a sense of belonging, or just a great place to work - our focus is helping you reach your full potential. Learn more about working here at ___ or connect with us on ___, ___ and ___.

Overview: WHY COOLSYS? At CoolSys, we offer more than just a job—we provide stability, growth, and industry-leading benefits for our employees. No wonder Newsweek named CoolSys one of America’s Greatest Workplaces! As a large company serving diverse customers, we invest in our team with: • Competitive Compensation: $35-$42/hr, • Sign on Bonus: Up to $3,000.00 DOE, • Ongoing Education & Training: Access to state-of-the-art facilities and paid online training., • Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match., • Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing., • Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more. Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: · Ability to report to work in a timely manner as scheduled by supervisor. · Repair and overhaul equipment such as compressors, water pumps, air handlers, electrical and mechanical control devices and other similar machinery. · Test malfunctioning systems and components using electrical and/or mechanical skills. · Maintain legible corporate and personal records of work history. · Provide general repair work on refrigeration, heating and ventilation equipment such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors and electric motors. · Provide preventative maintenance activities; diagnose equipment malfunctions and operating efficiency of mechanical equipment. · Perform work on minor construction and remodeling projects including startups of new installations. · Embodies the CoolSys CARES culture (Collaboration, Accountability, Respect, Empowerment, Safety). · Performs other duties as assigned. Qualifications: Education / Training · High school diploma or GED, equivalent work experience and trade or technical school classes. · Valid EPA certificate. Work Experience / Skills · 3-5 year's experience in commercial HVAC, refrigeration, and electrical required. · Basic knowledge of refrigeration, HVAC, ice machines, gas furnaces, and electrical. · Experience working on refrigeration equipment in convenience stores or supermarkets a strong plus. · Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful. · Knowlege of the components in a single-phase compressor and single-phase motor control circuit. · Ability to use an ohmmeter. · Ability to verify a capacitor is in good standing. · Ability to demonstrate an understanding of defrost circuits. · Knowledge of schematic and wiring diagram. · Ability to identify/explain function of refrigeration components. · Ability to properly leak check a single-compressor system. · Ability to demonstrate proper PPE and safety equipment. · Ability to set up LPC as the primary temperature control and as a pump down safety control. · Ability to demonstrate how to determine superheat and how to set expansion valve superheat. · Ability to verify a defrost termination is functional. · Ability to demonstrate the proper tasks for performing preventative maintenance on HVAC systems. · Ability and knowledge of the functions and safety precautions of the components of a gas furnace system. · Ability to properly recover refrigerant from a refrigeration system. · Ability to change oil in a vacuum pump. · Ability to demonstrate how to properly hook up a gauge set for evacuation. · Knowledge of reporting procedure for a large refrigerant release. · Knowledge of level 2 experience/information. · Must be able to lift up to 60 lbs. with no assistance and be able to sit and/or stand for several hours at a time. · Valid driver’s license. · Good driving record. · Ability to understand and follow all company policies and procedures and all applicable State and Federal laws. · Ability to use typical business tools including E-Mail, Word, Excel, etc. Join Us: Today, there are 27 different companies that make up the CoolSys family of brands. Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on ___ and ___. CoolSys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR for driving positions) and drug testing are required for all positions. CoolSys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance. Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Job DescriptionDescriptionGreat opportunity for commercial Service Technicians! DWC Mechanical is looking for a highly experienced Service Technician to join the team. DWC Mechanical has provided mechanical contracting services to Western New York for over 30 years, becoming one of the most well-known and respected names in the business! DWC is a NexCore partner, with over 18 locations throughout the US! Position Overview The HVAC Service Technician will perform inspections, installation, maintenance and repair of commercial HVAC equipment and mechanical systems. This role requires a commitment to delivering high-quality service and ensuring customer satisfaction while maintaining safety standards. The ideal candidate will have a strong background in heating, ventilation, and air conditioning systems, with the ability to perform maintenance and repairs on commercial/industrial HVAC equipment. Responsibilities • Install, maintain, and service commercial HVAC equipment; furnaces, RTU's, makeup air units, heat pumps, condensers, controls, etc., • Successfully troubleshoots and services large building systems and controls, including: cooling towers, VRF, VFD, boiler systems, VAV, CRAC and some Chiller systems, • Perform maintenance and repairs when needed, • Diagnose electrical and mechanical faults within HVAC equipment, • Communicate with clients to ensure work is completed to their satisfaction, • Must be on time and ready to complete the task at hand, • Submit required paperwork on a daily basis, • Maintain cleanliness of vehicle, tools, and equipment, • Ability to use the required tools to complete the required task, • Follow all safety protocols, • Understand and wear personal protection equipment (PPE), • Follow all established procedures and standards communicated by management, • 8 or more years’ experience in a HVAC Service Role, • Strong knowledge of commercial HVAC systems service, repair and maintenance, • Ability to work independently as well as part of a team in a fast-paced environment., • Ability and willingness to work standard business hours, • Excellent problem-solving skills, • Organized and detail oriented, • Customer service skills, • Verbal and written communication skills, • Valid driver's license with a clean driving record for van driving responsibilities., • Competitive pay, • Comprehensive health insurance (including dental and vision), • Health Saving Account with company contribution, • Paid Life Insurance, • 401(k) plan with company matching, • Generous paid time off, • Paid Holidays, • Professional development assistance, • Employee discount

Lawn Specialist 595 Commerce Drive, Amherst, New York 14228 TruGreen accepts applications on an ongoing basis. At TruGreen, we believe every lawn holds potential and so does every team member. As a Residential Lawn Care Specialist, you'll be both a skilled technician and a turf whisperer, breathing life into lawns while earning the trust of homeowners who take pride in their outdoor spaces. You'll deliver expert treatments backed by TruGreen's proven methods, offering personalized care that produces lush, healthy lawns. With hands-on service and a customer-first mindset, you'll make a visible difference, building pride in every yard and progress in your career. What You’ll Do * Apply fertilizers and weed control treatments safely and precisely * Diagnose lawn concerns and offer expert solutions during customer visits and calls * Measure properties and provide quotes for TruGreen services * Maintain accurate records of treatments, customer instructions, and service notes * Drive to customer homes in a company vehicle and represent TruGreen with pride * Clean and inspect vehicles and equipment daily to keep operations smooth and safe * Upsell services to current customers through on-route interactions and calls * Contribute to facility upkeep as part of our team-oriented culture What You’ll Bring * High school diploma or GED * Experience in horticulture, landscaping, customer service, or related fields preferred * Valid driver’s license and clean driving record * Must be able to obtain a DOT medical card * Ability to read work instructions and complete documentation clearly and accurately * Basic math skills for property measurements and product calculations * Strong communication skills and attention to detail * Reliable time management and commitment to punctuality The Perks * Paid training and ongoing development * Health, dental, and vision benefits * 401(k) with company match * Competitive wages • Average income is $850 - $1,200/week (based on an hourly rate and average bonuses earned for qualifying specialists meeting performance expectations) Career advancement opportunities * Supportive team culture * Work outdoors, stay active, and make an impact you can see Physical Requirements * Lift up to 50 lbs and operate equipment * Work in varying weather and outdoor conditions * Move safely on uneven terrain and stairs * Interact with customers and apply treatments using proper PPE If you’re ready to grow your career while helping others grow great lawns, TruGreen is ready for you. Apply today and become a local lawn legend. Ability to speak, read and write fluently in English is required. You MUST BE physically located in the United States while performing this job. TruGreen is proud to affirm our commitment to hiring veterans. We recognize and appreciate the exceptional skills, dedication, and leadership that veterans bring to the workforce. By fostering an inclusive and diverse environment, we aim to leverage the unique experiences of veterans, creating a richer, more dynamic workplace. $27,669.00 - $58,865.00 This range is based on the qualifications necessary for the position, including experience, training, and other considerations permitted by law. Factors that may be used when making an offer may include a candidate’s skills, experience, and geographic location, the expected quality and quantity of work, and internal pay alignment, as needed. Most candidates will start in the bottom half of the pay range. The upper end of the range will generally be reserved for candidates with extensive experience. An employee’s pay history will not be a contributing factor where prohibited by local law. In addition to monetary compensation, we offer benefits, including Medical/Dental/Vision insurance and Company-matching 401(k) in addition to other programs and perks. TruGreen is committed to Diversity and Inclusion. We encourage diverse candidates to apply to this position. We are an Equal Opportunity/Affirmative Action Employer - Minorities/Females/Protected Veterans/Individuals with Disabilities. To learn more, please visit ___). California Residents: When you express interest in or apply for a job with TruGreen Limited Partnership, we collect personal information about you, potentially including personal identifiers, contact information, protected classifications, pre-hire information, professional or employment-related information, education history, and/or medical information, for the following business purposes: to comply with state and federal law and regulations requiring employers to maintain certain records; to evaluate your job application and candidacy for employment; and to obtain and verify background checks (including criminal and motor vehicle records), pre-employment drug testing, and references. Massachusetts Residents: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. TruGreen performs pre-employment testing. To view our disclaimer, ___

Lawn Specialist 595 Commerce Drive, Amherst, New York 14228 TruGreen accepts applications on an ongoing basis. At TruGreen, we believe every lawn holds potential and so does every team member. As a Residential Lawn Care Specialist, you'll be both a skilled technician and a turf whisperer, breathing life into lawns while earning the trust of homeowners who take pride in their outdoor spaces. You'll deliver expert treatments backed by TruGreen's proven methods, offering personalized care that produces lush, healthy lawns. With hands-on service and a customer-first mindset, you'll make a visible difference, building pride in every yard and progress in your career. What You’ll Do * Apply fertilizers and weed control treatments safely and precisely * Diagnose lawn concerns and offer expert solutions during customer visits and calls * Measure properties and provide quotes for TruGreen services * Maintain accurate records of treatments, customer instructions, and service notes * Drive to customer homes in a company vehicle and represent TruGreen with pride * Clean and inspect vehicles and equipment daily to keep operations smooth and safe * Upsell services to current customers through on-route interactions and calls * Contribute to facility upkeep as part of our team-oriented culture What You’ll Bring * High school diploma or GED * Experience in horticulture, landscaping, customer service, or related fields preferred * Valid driver’s license and clean driving record * Must be able to obtain a DOT medical card * Ability to read work instructions and complete documentation clearly and accurately * Basic math skills for property measurements and product calculations * Strong communication skills and attention to detail * Reliable time management and commitment to punctuality The Perks * Paid training and ongoing development * Health, dental, and vision benefits * 401(k) with company match * Competitive wages • Average income is $850 - $1,200/week (based on an hourly rate and average bonuses earned for qualifying specialists meeting performance expectations) Career advancement opportunities * Supportive team culture * Work outdoors, stay active, and make an impact you can see Physical Requirements * Lift up to 50 lbs and operate equipment * Work in varying weather and outdoor conditions * Move safely on uneven terrain and stairs * Interact with customers and apply treatments using proper PPE If you’re ready to grow your career while helping others grow great lawns, TruGreen is ready for you. Apply today and become a local lawn legend. Ability to speak, read and write fluently in English is required. You MUST BE physically located in the United States while performing this job. TruGreen is proud to affirm our commitment to hiring veterans. We recognize and appreciate the exceptional skills, dedication, and leadership that veterans bring to the workforce. By fostering an inclusive and diverse environment, we aim to leverage the unique experiences of veterans, creating a richer, more dynamic workplace. $27,669.00 - $58,865.00 This range is based on the qualifications necessary for the position, including experience, training, and other considerations permitted by law. Factors that may be used when making an offer may include a candidate’s skills, experience, and geographic location, the expected quality and quantity of work, and internal pay alignment, as needed. Most candidates will start in the bottom half of the pay range. The upper end of the range will generally be reserved for candidates with extensive experience. An employee’s pay history will not be a contributing factor where prohibited by local law. In addition to monetary compensation, we offer benefits, including Medical/Dental/Vision insurance and Company-matching 401(k) in addition to other programs and perks. TruGreen is committed to Diversity and Inclusion. We encourage diverse candidates to apply to this position. We are an Equal Opportunity/Affirmative Action Employer - Minorities/Females/Protected Veterans/Individuals with Disabilities. To learn more, please visit ___). California Residents: When you express interest in or apply for a job with TruGreen Limited Partnership, we collect personal information about you, potentially including personal identifiers, contact information, protected classifications, pre-hire information, professional or employment-related information, education history, and/or medical information, for the following business purposes: to comply with state and federal law and regulations requiring employers to maintain certain records; to evaluate your job application and candidacy for employment; and to obtain and verify background checks (including criminal and motor vehicle records), pre-employment drug testing, and references. Massachusetts Residents: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. TruGreen performs pre-employment testing. To view our disclaimer, ___

Lawn Specialist 595 Commerce Drive, Amherst, New York 14228 TruGreen accepts applications on an ongoing basis. At TruGreen, we believe every lawn holds potential and so does every team member. As a Residential Lawn Care Specialist, you'll be both a skilled technician and a turf whisperer, breathing life into lawns while earning the trust of homeowners who take pride in their outdoor spaces. You'll deliver expert treatments backed by TruGreen's proven methods, offering personalized care that produces lush, healthy lawns. With hands-on service and a customer-first mindset, you'll make a visible difference, building pride in every yard and progress in your career. What You’ll Do * Apply fertilizers and weed control treatments safely and precisely * Diagnose lawn concerns and offer expert solutions during customer visits and calls * Measure properties and provide quotes for TruGreen services * Maintain accurate records of treatments, customer instructions, and service notes * Drive to customer homes in a company vehicle and represent TruGreen with pride * Clean and inspect vehicles and equipment daily to keep operations smooth and safe * Upsell services to current customers through on-route interactions and calls * Contribute to facility upkeep as part of our team-oriented culture What You’ll Bring * High school diploma or GED * Experience in horticulture, landscaping, customer service, or related fields preferred * Valid driver’s license and clean driving record * Must be able to obtain a DOT medical card * Ability to read work instructions and complete documentation clearly and accurately * Basic math skills for property measurements and product calculations * Strong communication skills and attention to detail * Reliable time management and commitment to punctuality The Perks * Paid training and ongoing development * Health, dental, and vision benefits * 401(k) with company match * Competitive wages • Average income is $850 - $1,200/week (based on an hourly rate and average bonuses earned for qualifying specialists meeting performance expectations) Career advancement opportunities * Supportive team culture * Work outdoors, stay active, and make an impact you can see Physical Requirements * Lift up to 50 lbs and operate equipment * Work in varying weather and outdoor conditions * Move safely on uneven terrain and stairs * Interact with customers and apply treatments using proper PPE If you’re ready to grow your career while helping others grow great lawns, TruGreen is ready for you. Apply today and become a local lawn legend. Ability to speak, read and write fluently in English is required. You MUST BE physically located in the United States while performing this job. TruGreen is proud to affirm our commitment to hiring veterans. We recognize and appreciate the exceptional skills, dedication, and leadership that veterans bring to the workforce. By fostering an inclusive and diverse environment, we aim to leverage the unique experiences of veterans, creating a richer, more dynamic workplace. $27,669.00 - $58,865.00 This range is based on the qualifications necessary for the position, including experience, training, and other considerations permitted by law. Factors that may be used when making an offer may include a candidate’s skills, experience, and geographic location, the expected quality and quantity of work, and internal pay alignment, as needed. Most candidates will start in the bottom half of the pay range. The upper end of the range will generally be reserved for candidates with extensive experience. An employee’s pay history will not be a contributing factor where prohibited by local law. In addition to monetary compensation, we offer benefits, including Medical/Dental/Vision insurance and Company-matching 401(k) in addition to other programs and perks. TruGreen is committed to Diversity and Inclusion. We encourage diverse candidates to apply to this position. We are an Equal Opportunity/Affirmative Action Employer - Minorities/Females/Protected Veterans/Individuals with Disabilities. To learn more, please visit ___). California Residents: When you express interest in or apply for a job with TruGreen Limited Partnership, we collect personal information about you, potentially including personal identifiers, contact information, protected classifications, pre-hire information, professional or employment-related information, education history, and/or medical information, for the following business purposes: to comply with state and federal law and regulations requiring employers to maintain certain records; to evaluate your job application and candidacy for employment; and to obtain and verify background checks (including criminal and motor vehicle records), pre-employment drug testing, and references. Massachusetts Residents: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. TruGreen performs pre-employment testing. To view our disclaimer, ___

With more than 100 years of experience, Sika is a worldwide innovation and sustainability leader in the development and production of systems and products for commercial and residential construction, as well as the transportation, marine, automotive, and renewable energy manufacturing industries. Sika is a specialty chemicals company with a globally leading position in the development and production of systems and products for bonding, sealing, damping, reinforcing, and protection in the building sector and industry. Sika has subsidiaries in 103 countries around the world, produces in over 400 factories, and develops innovative technologies for customers worldwide. In doing so, it plays a crucial role in enabling the transformation of the construction and transportation industries toward greater environmental compatibility. Approximately 33,000 employees generated CHF 11.20 billion in sales in 2025. Job Description Watson Bowman Acme, a Sika company, is a manufacturer and supplier of expansion joint solutions for the transportation sector, including bridge and highway fabrication, preservation, and tunnels. This position is responsible for assisting Welding Fitters, Master Fitters, Forepersons, and Manufacturing Supervision staff as directed in the manufacture and assembly of metallic products supplied to the construction industry. More specifically, assist in fitting sub-assemblies as instructed, including but not limited to, tie downs, straightening, grinding, and stud welding on strip seal steel rails, using hand tools, overhead cranes, and welding equipment. Attention to safety and quality is essential to this position. Salary Range: $24 - $27 an hour based on education, experience, and qualifications of the applicant. Qualifications • High school diploma or equivalency required, additional course work with emphasis on welding preferred., • Ability to read and understand shop drawings and other written instructions., • Use of hand tools and basic TIG and GMAW welding., • Comply with all safety regulations, including Safe Work Permits, training requirements, and use of safety equipment., • Must be able to lift and manage material of up to 50 pounds unassisted; walk or stand for long periods of time; bend, stoop, or kneel if required; wear all required PPE., • Possess the legal right to work and remain in the United States without sponsorship. Additional Information • 401k with Generous Company Match, • Bonuses, • Medical, Dental, and Vision Benefits, • Paid Parental Leave, • Life Insurance, • Disability Insurance, • Paid time off, paid holidays, • Floating holidays + Paid Volunteer Time, • Wellness/Fitness Reimbursements, • Education Assistance, • Professional Development Opportunities We offer competitive salaries, aligned with local market benchmarks and the specific scope and responsibilities of each role. Compensation is determined based skills relevant to the position, education and/or training. We are committed to fair and equitable pay practices in accordance with applicable laws and regulations.

___ Job Type Full-time Description Looking for a job that can grow into a lifelong career? At Lactalis USA, we believe in promoting from within and giving our employees meaningful opportunities to learn, grow, and thrive. Whether you're just starting out or bringing years of experience, we'll provide the tools and support you need to succeed. Lactalis is the world leader in dairy-a family-owned company with over 85,000 pragmatic and ambitious professionals across the globe. Every day, we're proud to produce award-winning dairy products that bring people together every day. In the US, we offer an unrivaled house of beloved brands, including Galbani Italian cheeses and ricotta, President specialty cheeses and butters, Kraft natural and grated cheeses, Breakstone's cottage cheese, Cracker Barrel, Black Diamond cheddar, and Parmalat milk. Our yogurt portfolio includes siggi's, Stonyfield Organic, Brown Cow, Oui, Yoplait, Go-Gurt, :ratio, Green Mountain Creamery, and Mountain High, along with sour cream and a growing family of ethnic favorites like Karoun, Gopi, and Arz. At Lactalis, we live by our core values-Ambition, Engagement, and Simplicity. We're building a workplace where innovation thrives, diverse perspectives are celebrated, and everyone's unique background and ideas are valued. Even if you don't meet every qualification, we encourage you to apply. We want to hear about your PASSION, your STORY, and how your EXPERTISE can help us make an impact. From your PASSION to ours: Lactalis USA, part of the Lactalis family of companies, is currently hiring an Office Coordinator based in Buffalo, New York. Summary: Strong administrative support to the Human Resources team and management, supporting the manufacturing facility. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Essential Duties and Responsibilities include the following. Other duties may be assigned. 1. Ensures visitors (Non - Lactalis employees & Government employees) going into the plant for a tour fill out confidentiality forms, have an approved tour form filed out ahead of time and are added to the visitor entry log., 2. Greets employees/visitors and reaches out to the appropriate contact., 3. Picks up, drops off and distributes mail on a daily basis., 4. Generates a birthday/anniversary list on a monthly basis and distributes birthday cards., 5. Responsible for ordering all office supplies while working with a monthly budget., 6. Works with the HR team in regard to employee events., 7. Orders and maintains all aspects of employee uniforms working with the uniform company, including balancing invoices., 8. Collects temp hours, sends them to the proper agency and balances weekly invoice., 9. Ensure the coffee room is clean and fully stocked, ordering products as needed., 10. Keeps the foyer clean and presentable., 11. Gather all PPE for visitors or tours and keep supplies stocked., 12. Makes binders for new hire orientation as needed., 13. Conducts orientation for new hires., 14. Draft and send out new hire announcements/promotions., 15. Book travel arrangements as needed through Concur system., 16. Orders boots/shoes/uniforms for all employees and distributes to appropriate department., 17. Order lunch as needed for meetings., 18. Ensure the front area is shut down properly at end of day, doors locked, coffee room, reception area and desk area locked properly, and powered down. • Two-three years' related experience required., • Attention to detail and follow-up extremely important., • Strong communication and organizational skills required., • Must be able to manage multiple projects in a fast-changing environment., • Strong computer skills and experience with Outlook, Word, PowerPoint and Excel programs., • Highly motivated, dynamic, efficient, fast learning and self-starter. Education and/or Experience: • High School Diploma or Equivalency. Salary Description $22.00 - $25.00

Location: 3828 Broadway Buffalo, NY 14227 Shift: Tuesday- Saturday 6:00am- 2:30pm Starting Rate of Pay: $22.00/hr. What’s the Job? Ready to accelerate your career while helping our customers move forward? As a Fleet Maintenance Fueler Washer at Penske, you’ll do exactly that. You will make sure vehicles are fueled, clean and safe before they hit the road again. You will be the face of Penske—the person greeting our customers when they arrive and the one sending them off with a smile. Why join Penske as a Fleet Maintenance Fueler Washer, you ask? It’s simple. Maybe you’ve always had an interest in vehicle maintenance but haven’t had the chance to pursue it. This is the perfect place to start. No experience is required. We will introduce you to our vehicle maintenance processes. We will teach you how to use our leading-edge technology. In fact, the training and experience you get here will help you advance to become a technician. And you’ll get to do that learning at a company that offers career stability and competitive benefits. Talk about an amazing opportunity. It’s about going above and beyond for our customers—the way Penske goes above and beyond for you. It’s about building meaningful relationships. It’s about keeping our customers moving forward. Main Responsibilities: • Greeting our customers and making sure they have a great experience as you fuel and wash vehicles • Performing vehicle readiness inspections to make sure tires, fluids, and other basic maintenance items are done • Helping make sure our facilities are clean, safe environments for our customers and associates • Building your skills through training and hands-on coaching to perform minor repairs such as installing mounted tires, replacing or rotating tires and performing preventive maintenance repairs • Completing other projects and tasks as assigned by supervisor Why Penske is for You: • Competitive starting salary: $22.00/hr. • Shift Premiums: $3.00 (2nd shift), $4.00 (3rd shift) • Career stability • Opportunity for growth • Excellent benefits, including lots of time off: Benefits - Penske ( ) • Strong, well-rounded training programs • Advanced vehicle maintenance technology • Location and schedule flexibility General Requirements: • High school diploma, equivalent, or prior work experience preferred • Valid driver’s license required • Excellent customer service and communication skills • The ability to work well as part of a team • The ability and willingness to work outside • Basic mechanical ability and tool usage (preferred) • Basic computer skills • The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management • The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice. • Regular, predictable, full attendance is an essential function of the job • As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review. • Willingness to work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education), the ability to pass a drug screen and physical as required by the Department of Transportation, and potential travel within a near geography for training are required. This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period. • The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls. • The associate must be able to work safely at heights using applicable ladders and elevated working platforms. • The associate must be able to safely work in all weather conditions. • Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment. • The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. This position also requires the ability to push/pull truck tires on a regular basis that exceed 100 pounds. Penske is an Equal Opportunity Employer About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success. Visit Go Penske to learn more. Job Category: Vehicle Maintenance/Mechanics/Technicians Job Family: Vehicle Maintenance Address: 3828 Broadway Primary Location: US-NY-Buffalo Employer: Penske Truck Leasing Co., L.P. Req ID: 2603106

ServiceMaster Clean - - Responsibilities: Perform all cleaning duties for facilities using provided ServiceMaster products, tools and procedures; Sweeping, mopping, polishing, trash removal, restroom cleaning, windows, dusting; Maintain inventory of supplies and equipment.Use proper PPE where requi

Job Description Welder / Fabricator – 2nd Shift (3:30 PM–Midnight) Location: Buffalo, NY Schedule: 2nd Shift | 3:30 PM – 12:00 AM | Monday–Friday Employment Type: Full-Time | Overtime Available Industry: Industrial Manufacturing • Structural Steel • Modular Fabrication Job Overview We are seeking an experienced Mechanical Welder / Fabricator for our 2nd Shift (3:30 PM–Midnight) industrial manufacturing operations. The Mechanical Welder / Fabricator will fit, tack, weld, assemble, and repair steel components, structural assemblies, and production parts using MIG/GMAW, TIG/GTAW, and other welding processes in a fast-paced fabrication environment. This role is ideal for candidates with experience in manufacturing welding, structural steel welding, blueprint reading, mechanical assembly, production welding, and industrial metal fabrication. Daily Responsibilities As a 2nd Shift Mechanical Welder / Fabricator, you will: Welding & Fabrication • Fit, tack, and weld carbon steel, stainless steel, and low-alloy steel using MIG/GMAW, TIG/GTAW, and manual welding techniques., • Weld assemblies, sub-assemblies, brackets, channels, angles, and modular components per engineering drawings., • Read and interpret blueprints, weld symbols, detail drawings, and fabrication schematics., • Measure, cut, and layout materials using calipers, squares, tape measures, and fabrication tools., • Fabricate fixtures and support tools based on engineering sketches., • Assemble welded components into larger structures, platforms, frames, or modular units., • Inspect welds for accuracy, penetration, and quality., • Repair, rework, or correct fabrication issues and dimensional deviations., • Meet production targets, quality standards, and labor-hour requirements during 2nd shift operations., • Maintain welding machinery, tools, and PPE in safe working condition., • Follow OSHA rules, AWS standards, and internal safety guidelines., • Complete shop order documentation, time sheets, and necessary reports. Requirements: • Proven experience as a Welder, Fabricator, MIG Welder, TIG Welder, or Industrial Welder., • Skilled in MIG, TIG, Stick, GMAW, GTAW, and related welding processes., • Experience using electrical and manual tools (angle grinders, saws, calipers, clamps, squares, measuring tools)., • Ability to read and interpret technical drawings, diagrams, and welding blueprints., • Knowledge of welding safety standards, weld quality requirements, and inspection practices., • Ability to lift 50 lbs and perform physical tasks including bending, kneeling, overhead work, and climbing., • Strong attention to detail and quality craftsmanship., • Willingness to work 2nd shift (3:30 PM–Midnight) and overtime as needed. Preferred Skills / Qualifications • Welders should have AWS Certification (GMAW, 3G Vertical Up, 4F Overhead)., • Mechanical assembly experience in manufacturing or fabrication environments., • Experience welding carbon steel, stainless steel, and alloy steels., • Knowledge of torch cutting, plasma cutting, and GTAW/TIG welding., • Understanding of manufacturing tolerances and measurement verification., • Ability to work independently and as part of a team on 2nd shift.Company DescriptionGTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.

Job Description Job Title: Fabrication Welder $31.95/hr Job Description We are seeking a skilled Second Shift Welder to join our fabrication team. This role is responsible for performing high-quality welding, layout, cutting, and assembly work in accordance with drawings, specifications, and code requirements. The ideal candidate is detail-oriented, safety-focused, and capable of producing consistent, code-compliant welds in a fast-paced manufacturing environment. Responsibilities • Perform high-quality welding, layout, cutting, and assembly work., • Ensure all work complies with drawings, specifications, and code requirements., • Produce consistent, code-compliant welds., • Operate welding and fabrication equipment, including coupling and tubesheet welders., • Experience in fabrication and welding, including Mig and Tig welding., • Ability to qualify under ASME Section VIII & IX welding codes., • Code-qualified in shop welding procedures for carbon steel, stainless steel, and stainless-to-carbon applications., • Strong understanding of fabrication drawings, tolerances, and welding symbols., • Demonstrated ability to produce consistent, high-quality welds., • Experience with torch cutting and inspection. Enjoy a comprehensive pension plan with company contributions, supplied PPE and tools, and work in a clean and warm environment during winter. Benefit from designated booths, materials delivered to your workspace, and access to a supply closet with tools at your disposal. Personal lockers and showers are also available for convenience. Work Environment This role operates on the second shift from 3:30 PM to midnight in a clean and well-lit environment. All tools and PPE are supplied, ensuring a safe and productive workspace. Job Type & Location This is a Contract to Hire position based out of Buffalo, NY. Pay and Benefits The pay range for this position is $31.95 - $31.95/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionWelder / Fabricator – $25-29/hr (1st Shift) Join a leading manufacturer of engineered process equipment used in heat transfer and liquid filtration systems. From automatic strainers and heat exchangers to aftercoolers and cyclone separators, you’ll be part of a team that builds high‑performance industrial systems with precision and pride. Why You’ll Love Working Here This company invests in its people and rewards high‑quality work. You’ll enjoy: • 💰 401(k) with company match, • 🏥 80% employer‑paid health insurance, • 👀 Full medical, dental & vision benefits, • 👓 Annual eyewear/equipment allowance, • 👢 $150 boot allowance each year, • 🔧 Interesting, varied projects—no two builds are the same, • Performing high‑quality welds, repairs, and assemblies using multiple welding techniques, • Operating fabrication equipment (brakes, rolls, shears, drill presses, flame cutters), • Measuring and verifying workpiece specifications with precision tools, • Reading and interpreting blueprints, schematics, and build drawings, • Setting up and running machine tools (drill press, end mill, edge planer), • Assembling and installing equipment using both hand and power tools, • Aligning and fastening machine components accurately during assembly, • Operating lathes and additional fabrication equipment as needed, • Cutting, threading, bending, and connecting metal and non‑metal piping, • Securing piping with brackets, clamps, and hangers, • Performing both TIG and MIG welding on stainless steel and carbon steelWhat You Bring, • 4+ years of welding and fabrication experience, • Strong proficiency in TIG and MIG welding on stainless & carbon steel, • Ability to read and interpret blueprints and technical drawings, • Experience running fabrication machinery and shop tools, • High school diploma or GED required, • Strong attention to detail, craftsmanship, and safety awarenessBonus Skills, • Fabrication‑heavy experience, • Pulse welding experience, • Moderate noise, heat, and active fabrication equipment, • Standing, lifting, bending, and hands‑on work for the full shift, • A safety‑focused culture with required PPE Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Tonawanda,NY. Application Deadline This position is anticipated to close on Mar 31, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Join our Mission to Lead the Future of Snacking AT Mondelez International Part Time Nabisco Merchandiser Join our team of Part Time Nabisco Merchandisers and fulfill the merchandising needs of our customers through communication & relationship building, stocking store shelves, and maintaining or changing out displays. Become an ambassador of world-famous brands like Oreo, Ritz, belVita, Chips Ahoy, Triscuit, among other delicious industry-leading snacks. * Represent Mondelez in front of in-store employees and work closely with the sales representative to optimize the visibility of Mondelez products on shelves and to construct promotional displays. * Carry out in-store visits according to Mondelez' DSD Merchandising Steps including capturing pictures of displays at assigned stores. * Ensure Nabisco leading brands (Oreo, Ritz, belVita, Chips Ahoy, Triscuit, among others) are well represented, stocked, and maintained through the implementation of Mondelez' guidelines. * Ensure Sales Representative's negotiated plans with store managers are being followed and communicate any issues with Mondelez' management team. * Follow the daily schedule set by the merchandising manager to ensure the most efficient in-store service. * Enhance seasonal sales, seasonal displays, and new product launches. * Demonstrate positive and upbeat attitude while representing Mondelez in store. For a closer view of what our merchandisers do: Day in the Life of a Mondelez Merchandiser Who is a good fit? * Be at least 18 years of age and have a valid driver's license issued by the state in which the person resides. (if does NOT service a military base store, use and unhighlight this one and remove bullet below) * Be at least 18 years of age and have a valid REAL ID driver's license (issued by the state in which the person resides), U.S. passport, or federal ID. This role will service a military base facility where it is a federal requirement to have a valid REAL ID driver's license, U.S. passport, or federal ID to access. (if DOES service a military base store, use and unhighlight this one and remove bullet above) * Someone with a positive and professional attitude who is self-motivated and can work independently. * Ability to drive your personal vehicle to a variety of store locations (mileage will be reimbursed). * Ability to download and use work related applications on your personal device. * Ability to perform hard work in a fast-paced work environment and to meet the defined physical activities like repetitive lifting, bending, and carrying up to 25 lbs. Occasionally, pushing and pulling over 50 lbs. This includes physically moving our products from the stock rooms to store floor and stocking the store's shelves. * Previous retail / grocery experience is a plus. * Live within 25 miles range from the primary location: Buffalo, NY * Secondary locations: Orchard Park, Lancaster & Cheektowaga * Schedule availability required: Saturday & Sunday #ushourly Salary and Benefits: Hourly compensation rate ranges from $19.63 to $21.63 based on relevant experience / 401 Savings Plan, Mileage reimbursement (according to company policy), Strong career advancement opportunities within the company, Health and Well-Being Program, Employee Assistance Program (EAP), Internet reimbursement of $10.00, when a company device is not provided, Safety equipment such as kneeling pads, safety knives, and PPE Business Unit Summary The United States is the largest market in the Mondelez International family with a significant employee and manufacturing footprint. Here, we produce our well-loved household favorites to provide our consumers with the right snack, at the right moment, made the right way. We have corporate offices, sales, manufacturing and distribution locations throughout the U.S. to ensure our iconic brands-including Oreo and Chips Ahoy! cookies, Ritz, Wheat Thins and Triscuit crackers, and Swedish Fish and Sour Patch Kids confectionery products -are close at hand for our consumers across the country. Mondelez Global LLC is an Equal Opportunity Employer/Protected Veterans/Persons with Disabilities. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran status, sexual orientation, gender identity, gender expression, genetic information, or any other characteristic protected by law. Applicants who require accommodation to participate in the job application process may contact 847-943-5460 for assistance. For more information about your Federal rights, please see eeopost.pdf ; EEO is the Law Poster Supplement ; Pay Transparency Nondiscrimination Provision ; Know Your Rights: Workplace Discrimination is Illegal Job Type Regular Field Sales Sales At Mondelez International, our purpose is to empower people to snack right through offering the right snack, for the right moment, made the right way. That means delivering a broader range of delicious, high-quality snacks that nourish life's moments, made with sustainable ingredients and packaging that consumers can feel good about. We have a rich portfolio of strong brands - both global and local. Including many household names such as Oreo, belVita and LU biscuits; Cadbury Dairy Milk, Milka and Toblerone chocolate; Sour Patch Kids candy and Trident gum. We are proud to hold the number 1 position globally in biscuits, chocolate and candy as well as the No. 2 position in gum Our 80,000 Makers and Bakers are located in our operations in more than 80 countries and are working to sell our products in over 150 countries around the world. They are energized for growth and critical to us living our purpose and values. We are a diverse community that can make things happen, and happen fast. Join us and Make It An Opportunity! Mondelez Global LLC is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran status, sexual orientation, gender identity, gender expression, genetic information, or any other characteristic protected by law. Applicants who require accommodation to participate in the job application process may contact 847-943-5460 for assistance.

Location: Buffalo, NY Salary: $120,000+ Proven earnings potential of $150K+ About Us We are a large physician-owned group expanding in Buffalo, NY. This is an opportunity to join our internal medicine team in an SNF setting. We offer generous compensation, 401k, health insurance, malpractice coverage, CME, and more. If you are interested, please let me know a convenient time for us to discuss this in further detail. What Medrina Offers: • Competitive Compensation, • Sign-On Bonus, • Work-Life Balance: Enjoy a 'round and go' model no weekends, no nights, no holidays!, • Professional Growth: Benefit from ongoing education, mentorship, and support to enhance your career., • Autonomy & Flexibility: As part of our company, you ll have the freedom to structure your day around patient care., • Full Patient Load the Day You Start, • Part-Time Opportunities, • Proven Success and Unlimited Opportunity, • Contracting/Billing/Support from a dedicated team, • Prolonged periods of standing, walking, and sitting while working with patients, as well as working on a computer., • Must be able to lift up to 50 pounds., • May be exposed to bloodborne pathogens, physical hazards (e.g., needle pricks, etc.), and chemical hazards., • Must wear the required PPE per company and/or facility requirements., • Must comply with facility vaccination requirements. If you're looking for a truly unique opportunity to build a better medical career and make a meaningful change for patients, healthcare organizations, and yourself, then we may be the right fit for you. Please reach out if you are interested in learning more! EOE/M/F/Vet/Disability We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Job Description Maintenance Technician Facility: Buffalo, NY General Description The Maintenance Technician is responsible to assure that the manufacturing/process areas are always kept in good mechanical repair and working order as well as in constant production mode. They will support production with preventative and corrective maintenance, fabrication and machining of fixtures and other devices. They must be able to use safety policy and lockout tagout to ensure no risk of injury to themselves or other employees. Specific Duties • Order proper materials for job completion., • Follow all lockout tagout procedures., • Perform preventative and corrective maintenance on mechanical equipment., • Complete required records for work performed., • Perform planned maintenance inspections as required., • Maintain equipment to ensure maximum reliability., • Troubleshoot mechanical equipment failures and repair all process and plant equipment as necessary., • Fabricate and machine fixtures and other devices to support Production., • Must keep work area clean, neat, and orderly. Perform general housekeeping functions daily as required to maintain a safe and clean work environment., • Communicate professionally with everyone in the plant., • Follow instruction from the Shift Leader and Manager., • Work overtime as required., • Fill in or cross train in other departments as assigned., • Follow all applicable environmental, health and safety rules and procedures and immediately report all dangerous situations, near-misses, and injuries., • Participate in developing and updating risk assessments and review all applicable risk assessments annually. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Qualifications • High School Diploma or GED preferred., • Complete tasks with minimal supervision., • Basic mechanical aptitude., • Ability to use hand and shop tools., • Proven mechanical, hydraulic, and pneumatic skills., • Mechanical experience in either manufacturing or related areas., • Good communication skills are required., • Ability to lift 60 pounds on a regular basis, multiple times an hour., • Must be able to work in an un-airconditioned environment for a minimum of 8 hours per day. Physical Demands • The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully., • The employee frequently is required to stand; walk, talk and hear. The employee is occasionally required to climb or balance and stoop. A large degree of lifting (moderate to heavyweight), bending, squatting and maneuvering. Specific vision abilities required by this job include close vision, for viewing a computer terminal distance vision, peripheral vision, depth perception vision for moving objects and ability to adjust focus., • This position is not substantially exposed to adverse environmental conditions., • The ability to work with chemicals in the proper environment and while wearing PPE. Personal Protective Equipment The following list of PPE is required while in the manufacturing area: • Safety Glasses conforming to ANSI Z87.1 or higher, • Steel Toe Safety Shoes conforming to OSHA General Industry Standards 29 CFR 1910, • Hearing protection conforming to OSHA General Industry Standards 29 CFR 1910, • The ability to wear a full or half face respirator conforming to OSHA General Industry Standards 39 CFR 1910.134, • Additional PPE may be required depending on the department Hutchinson Industries, Inc. is an equal opportunity employer. This is a non-exempt position. Hutchinson Industries, Inc. reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between Hutchinson Industries, Inc. nor the employee, and either one may terminate employment without notice at any time.

Job Description Production Operator-Spin Molder I Facility: Buffalo, NY General Description The Production Operator – Spin Molder I is responsible to effectively operate the spinner, as well as any secondary equipment to which they are assigned, safely and efficiently. They must use any required equipment, molds, tooling, and measuring devices to ensure a quality product is produced. They must demonstrate the ability to take directions from the immediate manager and designated management representatives. Specific Duties • Retains all specific duties of Production Operator Job Description., • Follow proper start up and shut down procedures when using spin molding machines., • Alert immediate manager of any issues with spin molding machines and assist with cleaning and maintenance of the equipment when safe and appropriate., • Follow all applicable environmental, health and safety rules and procedures and immediately report all dangerous situations, near-misses, and injuries., • Participate in developing and updating risk assessments and review all applicable risk assessments annually. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Qualifications • Retains all qualifications of Production Operator Job Description., • Previous experience working in with molding equipment is preferred. Physical Demands • The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully., • The employee frequently is required to stand; walk, talk and hear. The employee is occasionally required to climb or balance and stoop. A large degree of lifting (moderate to heavyweight), bending, squatting and maneuvering. Specific vision abilities required by this job include close vision, for viewing a computer terminal distance vision, peripheral vision, depth perception vision for moving objects and ability to adjust focus., • This position is not substantially exposed to adverse environmental conditions., • The ability to work with chemicals in the proper environment and while wearing PPE. Personal Protective Equipment The following list of PPE is required while in the manufacturing area: • Safety Glasses conforming to ANSI Z87.1 or higher, • Steel Toe Safety Shoes conforming to OSHA General Industry Standards 29 CFR 1910, • Hearing protection conforming to OSHA General Industry Standards 29 CFR 1910, • The ability to wear a full or half face respirator conforming to OSHA General Industry Standards 39 CFR 1910.134, • Additional PPE may be required depending on the department Hutchinson Industries, Inc. is an equal opportunity employer. This is a non-exempt position. Hutchinson Industries, Inc. reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between Hutchinson Industries, Inc. nor the employee, and either one may terminate employment without notice at any time.

Job Description Overview Tradesmen International is looking to expand our team of qualified Trade Professionals for current & future projects in and around Cheektowaga, NY. Most positions are first shift with a pay scale of $25-35/hour based on experience & skill level. If you are a Welder and want to work alongside other proven Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career! Job Scope: • MIG, TIG, Stick & Structural Welding, • Perform Quality Checks (Inspection & Testing), • Maintain Safety Protocols, • Fabricating, assembling, and repairing structures, • Air Arc, • Repair Welding, • Pipe & Mechanical, • Flat/Vertical Carbon Steel Responsibilities • Basic Tools for the Trade, • Proper PPE must be worn: Have your own Hood and Gloves/Leathers Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Vacation Pay, • Health insurance, • 401(k) profit-sharing savings plan, • Incentive programs Click here to visit Tradesmen’s full website.

Job Description Job Title: Warehouse Associate (Picker) Job Description The Picking Representative works in the fulfillment warehouse and is responsible for accurately picking and verifying customer orders. This role supports overall warehouse operations and may assist with packing and shipping as needed. The position requires standing for long periods and the ability to lift up to 50 lbs. Responsibilities • Pick customer orders based on transfer orders and system instructions., • Verify product and order accuracy during all picking steps., • Replenish inventory and supplies to maintain workflow efficiency., • Maintain cleanliness and organization of work areas according to LEAN 5S standards., • Meet assigned productivity and accuracy KPIs., • Follow all fulfillment SOPs, policies, and work instructions., • Use required PPE and follow safety guidelines., • Assist with packing and shipping duties as needed., • Support overtime or extended hours based on business needs., • Ability to stand and move throughout the shift., • Ability to lift up to 50 lbs., • Comfortable working in a warehouse environment., • Basic computer skills including log-in, navigation, and system use., • Willingness to follow SOPs, quality, and safety standards., • Prior warehouse or order-picking experience., • SAP and/or RF scanner experience., • Inventory management familiarity., • Experience handling electronics or regulated products. Enjoy full medical, dental, and vision coverage, and access to a cafeteria with free snacks, catered events, and a gym. Benefit from hands-on mentorship with experienced technicians and gain in-demand technical skills in a niche dental technology field. Join a stable, supportive team with a strong culture of training and development, while working for a world leader in dental materials and digital denture systems. Work Environment The work environment is a dedicated testing and repair facility within a clean, organized manufacturing setting. It involves a mix of hands-on bench work, light logistics, and technical troubleshooting in a collaborative environment. The role may require standing, bending, and occasional lifting. The company upholds high safety standards and has a strong reputation for quality. Job Type & Location This is a Permanent position based out of Buffalo, NY. Pay and Benefits The pay range for this position is $18.00 - $21.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description About GTI Fabrication GTI Fabrication is a leading U.S. contract manufacturer specializing in complex metal fabrication, integration, and high-volume manufacturing for critical industries such as energy storage, data center infrastructure, defense, HVAC, and industrial systems. With state-of-the-art facilities in Arizona and New York, we deliver precision, quality, and scalable solutions from raw material to finished product. Position Summary We’re seeking reliable Machine Operators skilled in CNC machinery and/or brake press operation to join our growing fabrication team. Operators will be responsible for setting up, running, and monitoring production equipment to shape, cut, bend, and finish metal components to strict specifications. This role supports end-to-end fabrication processes within GTI’s advanced manufacturing environment, contributing to production efficiency, quality output, and workplace safety. Key Responsibilities • Prepare, set up, and operate CNC machines (e.g., milling, routing, punching) according to work orders and engineering drawings., • Set up and operate press brake equipment for bending and forming sheet/plate metal to required dimensions and angles., • Load and align tooling, fixtures, and program parts based on engineering specs., • Inspect finished parts for quality, dimensional accuracy, and adherence to tolerances using measuring tools (calipers, micrometers, gauges)., • Perform routine maintenance and cleaning of machinery; report issues to maintenance/lead personnel., • Follow established safety protocols and maintain a clean, organized work area., • Collaborate with production team members and supervisors to meet daily production goals. Required • Prior experience operating CNC machines and/or press brakes in a manufacturing or fabrication setting., • Basic understanding of machine setup, tooling changes, and part measurement., • Ability to read and interpret blueprints, technical drawings, and standard work instructions., • Comfortable using precision measuring tools., • Commitment to safety standards and quality outcomes., • Formal technical training or certification in machining, fabrication, or related fields., • Experience with industrial metal fabrication processes (sheet/plate steel)., • Competitive hourly wage (based on experience) with shift premium where applicable, • Benefits package: health, dental, vision (if offered), • Retirement savings plan options, • Opportunities for skills advancement and internal mobility This is a hands-on production role in a fast-paced shop floor environment. Operators will work with heavy equipment and fabricated materials, where adherence to safety practices and PPE requirements is essential. Monday-Friday 7am -4pm

Job Description Production Operator- Panel Assembler Facility: Buffalo, NY General Description The Production Operator – Panel Assembler is responsible to effectively operate the booth & work cell, as well as any secondary equipment to which they are assigned, safely and efficiently. They must use any required equipment, tooling, and measuring devices to ensure a quality product is produced. They must demonstrate the ability to take directions from the immediate manager and designated management representatives. Specific Duties • Retains all specific duties of Production Operator Job Description., • Follow proper start up and shut down procedures when booths., • Alert immediate manager of any issues with booths and assist with cleaning and maintenance of the equipment when safe and appropriate., • Ability to place panels correctly to reduce rework and extra trimming on tanks., • Follow all applicable environmental, health and safety rules and procedures and immediately report all dangerous situations, near-misses, and injuries., • Participate in developing and updating risk assessments and review all applicable risk assessments annually. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Qualifications • Retains all qualifications of Production Operator Job Description., • Previous experience working with adhesives in a manufacturing environment is preferred. Physical Demands • The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully., • The employee frequently is required to stand; walk, talk and hear. The employee is occasionally required to climb or balance and stoop. A large degree of lifting (moderate to heavyweight), bending, squatting and maneuvering. Specific vision abilities required by this job include close vision, for viewing a computer terminal distance vision, peripheral vision, depth perception vision for moving objects and ability to adjust focus., • This position is not substantially exposed to adverse environmental conditions., • The ability to work with chemicals in the proper environment and while wearing PPE. Personal Protective Equipment The following list of PPE is required while in the manufacturing area: • Safety Glasses conforming to ANSI Z87.1 or higher, • Steel Toe Safety Shoes conforming to OSHA General Industry Standards 29 CFR 1910, • Hearing protection conforming to OSHA General Industry Standards 29 CFR 1910, • The ability to wear a dust mask conforming to OSHA General Industry Standards 39 CFR 1910.134, • Additional PPE may be required depending on the department Hutchinson Industries, Inc. is an equal opportunity employer. This is a non-exempt position. Hutchinson Industries, Inc. reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between Hutchinson Industries, Inc. nor the employee, and either one may terminate employment without notice at any time.

Job DescriptionWe are seeking a skilled, motivated, and adaptable Scale Field Service Technician to join our growing team. This role is responsible for installing, calibrating, maintaining, and repairing industrial and commercial weighing equipment at customer sites and in our service facility. Qualifications • Willing to learn, • Excellent customer service skills, • Excellent problem-solving skills with exceptional attention to detail, • Strong mechanical and electrical troubleshooting skills, • This position requires a high school diploma or equivalent, • Knowledge of machines and tools, electronic equipment, related hardware and software, including their uses, repair, and maintenance, • Basic electronic and mechanical knowledge, including working knowledge of a digital multimeter, • CDL CLASS B and NYS Weights & Measures certification a plusResponsibilities, • Provide installation, calibration, and field service repair on weighing equipment using testing devices, gauges, and other tools and equipment, • Check work orders and related manuals, blueprints, and schematic diagrams to determine tools, equipment, and parts needed for installation or repair assignment, • Complete job hazard analysis, ensuring safety protocols and PPE are in place before starting any task, • Test electrical components and replace faulty components, • Properly maintain all equipment, tools, and facilities for safe operation, • Accurate and timely completion of all reporting, • Advise management regarding customer satisfaction, product performance, or suggestions for product/service improvements, • Follow all Federal, State, and local regulations, and Company Safety policies, • Represent Scales, Sales & Service professionally and ethically at all times, • Keep up with technology changes to products as introduced

Job DescriptionSalary: $23.00 to $26.00 per hour Montante Construction is seeking a dependable, motivated Construction Laborer to join our growing team! This handson role supports our project managers, superintendents, and skilled trades by helping deliver highquality construction projects safely, efficiently, and on schedule. If you take pride in your work, enjoy a fastpaced environment, and want to grow your career in the construction field, wed love to hear from you. Responsibilities As a Construction Laborer, you will support project teams by performing a variety of tasks across active job sites, including: General Construction Support • Assist with job setup, preparation, material handling, and cleanup, • Assist with demolition, concrete preparation, carpentry support, and other basic construction activities, • Load and unload materials, tools, and equipment to keep the job running smoothly, • Operate basic hand tools such as hammers, pliers, screwdrivers, and drills, • Maintain clean, organized, and safe work areas at all times, • Help ensure work areas meet safety and cleanliness standards before, during, and after finishing/painting tasks Safety & Communication • Follow all safety procedures and use proper PPE at all times, • Report safety, quality, or schedule concerns promptly to project supervisors, • Maintain awareness of surroundings and follow established safety measures on job sites Team Support & Additional Duties • Work collaboratively with supervisors and skilled trades to support project deadlines, • Complete tasks thoroughly and efficiently as assigned Qualifications & Experience • 13 years of experience in construction preferred, • OSHA 10 Hour certification or willingness to obtain after hire, • Ability to lift 50 lbs regularly and perform physical labor in varying conditions, • Basic understanding of construction safety practices, • A positive attitude, willingness to learn, and ability to take direction, • Strong communication and teamwork skills, • Ability to travel to various job sites throughout the WNY region Total Compensation Montante Construction offers a competitive and comprehensive total compensation package that includes: • Competitive hourly wages with annual review and bonus potential, • Medical insurance with employer contribution, or medical optout credit, • Employerpaid life insurance and longterm disability insurance, • 401(k) plan with employer match up to 4%, • Up to 15 days of PTO in year one, plus paid holidays, • Additional voluntary benefits such as dental, vision, short/longterm disability, AD&D, critical illness, accident insurance, legal/identity protection, and pet insurance, • Training and professional development opportunities, • Company and community engagement events

Job Description Production Operator-Wheel Assembly Technician Facility: Buffalo, NY General Description The Production Operator – Wheel Assembly Technician is responsible to effectively operate the tire changer, as well as any secondary equipment to which they are assigned, safely and efficiently. They must use any required equipment, tooling, and measuring devices to ensure a quality product is produced. They must demonstrate the ability to take directions from the immediate manager and designated management representatives. Specific Duties • Retains all specific duties of Production Operator Job Description., • Install runflats in properly without damage to the wheel and tire, and without leaving any unnecessary components or tools inside the assembly., • Follow proper start up and shut down procedures when using tire install machines., • Alert immediate manager of any issues with tire install machines and assist with cleaning and maintenance of the equipment when safe and appropriate., • Follow all applicable environmental, health and safety rules and procedures and immediately report all dangerous situations, near-misses, and injuries., • Participate in developing and updating risk assessments and review all applicable risk assessments annually. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Qualifications • Retains all qualifications of Production Operator Job Description., • Previous experience working with a tire changer is preferred., • A reasonable level of mechanical aptitude and attention to detail is needed to properly install the runflats, in the correct sequence, using the designated tools and fixturing, without creating any quality defects. Physical Demands • The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully., • The employee frequently is required to stand; walk, talk and hear. The employee is occasionally required to climb or balance and stoop. A large degree of lifting (moderate to heavyweight), bending, squatting and maneuvering. Specific vision abilities required by this job include close vision, for viewing a computer terminal distance vision, peripheral vision, depth perception vision for moving objects and ability to adjust focus., • This position is not substantially exposed to adverse environmental conditions., • The ability to work with chemicals in the proper environment and while wearing PPE. Personal Protective Equipment The following list of PPE is required while in the manufacturing area: • Safety Glasses conforming to ANSI Z87.1 or higher, • Steel Toe Safety Shoes conforming to OSHA General Industry Standards 29 CFR 1910, • Hearing protection conforming to OSHA General Industry Standards 29 CFR 1910, • The ability to wear a dust mask conforming to OSHA General Industry Standards 39 CFR 1910.134, • Additional PPE may be required depending on the department Hutchinson Industries, Inc. is an equal opportunity employer. This is a non-exempt position. Hutchinson Industries, Inc. reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between Hutchinson Industries, Inc. nor the employee, and either one may terminate employment without notice at any time.

Job DescriptionNow Hiring an Electrician! We are actively hiring a skilled electrician to perform commercial and light industrial electrical work on new construction or service projects. Electricians must be able to work independently and complete work safely and efficiently. All employees will be working on a Monday through Friday, first shift schedule. Responsibilities • Rough in conduit and wiring in new commercial buildings following provided plans and prints., • Terminate wires at switches, circuit breaker panels, and relays., • Wire instruments controlling power, lighting, and heating units., • Provide wiring for air conditioning and refrigeration units., • Use power tools, test meters, pipe threaders, and conduit benders., • Lead teams or projects in absence of foreman.Skill Recommendations, • Residential, commercial, or industrial electrical experience, • Safety-oriented with OSHA certification., • Experience with hand and power tools and testing equipment., • Low and high voltage experience beneficial., • OSHA 10 or 30 preferred., • Ability to work independently or on a team. Additional Information • Work environment may include commercial or industrial job site locations, • PPE provided, • Will work on teams of 2 to 4 employees, • Tool allowance provided, • Comprehensive medical benefits, • Ability to accrue NYS sick leave and PTO, • Phone reimbursement, • Access to company vehicle Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Buffalo,NY. Application Deadline This position is anticipated to close on Apr 10, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionCompany Overview GTI designs, engineers, and manufactures custom modular systems supporting energy storage, data center infrastructure, defense, and industrial markets. Our operations include in-house fabrication, welding, mechanical and electrical assembly, industrial painting, and final build of complex modular products.GTI operates fast-paced manufacturing facilities where safety, quality, and teamwork matter. This role is designed as an entry point into GTI’s manufacturing organization, with opportunities to grow into skilled trades and technical roles.Position Overview GTI is hiring Entry-Level General Laborers to support daily production operations across fabrication, welding, assembly, and paint departments. This is an evergreen position used to maintain a steady pipeline of candidates for current and future manufacturing needs.General Laborers provide hands-on support to skilled trades and production teams by assisting with material handling, basic assembly, surface preparation, shop organization, and maintaining a safe and efficient work environment. No prior manufacturing experience is required. Training is provided.Key ResponsibilitiesProduction & Shop Support • Support fabrication, welding, assembly, and paint teams with daily production tasks, • Assist with material movement, staging, and part handling across departments, • Prepare work areas and maintain shop organizationFabrication, Assembly & Paint Support, • Assist welders, fabricators, assemblers, and painters as directed, • Perform basic assembly, fastening, masking, sanding, cleaning, and surface prep tasks, • Support paint operations with part prep, masking, hanging, and cleanup, • Support mechanical and electrical assembly teams with component staging and installation assistanceTools, Equipment & Housekeeping, • Use basic hand tools and power tools under supervision, • Maintain clean workstations and shared shop areas, • Assist with equipment setup, teardown, and cleanupSafety & Quality, • Follow safety procedures, PPE requirements, and work instructions, • Maintain quality awareness and report defects or issues, • Support safe handling of materials, tools, and equipmentTeam & Production Support, • Follow direction from supervisors and lead workers, • Support production schedules through reliability and flexibility, • Work collaboratively in a fast-paced manufacturing environmentRequired Qualifications, • Willingness to learn and work in an industrial manufacturing environment, • Ability to follow instructions and safety requirements, • Ability to lift up to 50 lbs and perform physical tasks throughout the shift, • Ability to stand, bend, climb, and work on your feet for extended periods, • Reliable attendance and strong work ethicPreferred Qualifications, • Prior experience in manufacturing, fabrication, construction, warehouse, paint, or assembly roles, • Familiarity with hand tools, power tools, or industrial environments, • Interest in growing into skilled trades such as welding, assembly, paint, electrical, or maintenance 1st shift 5:00am-3:30pm/2nd Shift M-Thurs 4pm-2:30 am

Job Description We currently have an opening for a Tooling Presetter to support our team. Experience working with hand tools, power tools, automobile maintenance, and home repairs is helpful. In this position, you will complete tasks to support our team and ensure they have the materials required to meet the production schedule and keep work flowing. Our employees are well compensated and eligible for benefits. Responsibilities: • Review the daily schedule and ensure all materials are available and ready for use, • Clean and prepare used tooling, • Operate simple hand tools like, i.e., screwdrivers, wrenches, etc., tool measuring devices like hand and computer system gages, • Input and communicate test results and billing system information, • Provide input to help solve manufacturing problems or issues relating to tool setup, • A high school diploma or equivalent preferred, • Possess a valid driver’s license, • Capable of following tasks, and instruction sheets, working with little to no supervision, multitasking, and focusing on details, • Collaborative, works well with others, exhibits teamwork, • Possess necessary mechanical skills and understanding of how to use tools, • Able to stand, walk, and repeatedly lift for extended periods, • Comply with all safety guidelines to ensure a safe work environment, including always wearing the proper PPE, safely handling materials, tools, and chemicals, and reporting unsafe work conditions or equipment immediately Dental Insurance, Medical Insurance, Vision Insurance, and PTO

General Production Associate | Food Manufacturing | All Shifts. Use all required Personal Protective Equipment (PPE) and follow safety and GMP (Good Manufacturing Practices) guidelines.

Job Description Job Summary: The Production Associate will be involved in making the major system components that are provided directly to the Tectran customer. This person may be asked to work on various assembly lines within the production department. The ideal candidate will be results-driven, will have the ability to take initiative, and be able to work in a team atmosphere to deliver results. Responsibilities: • Assemble and package products according to work orders, • Perform quality checks, • Ensure efficiency targets are met to avoid shut down so that product moves to the next stage of the assembly process in a timely fashion, • Notify production lead person of any issues or discrepancies, • Keep work area clean and organized, • Other duties as assigned by Production Supervisor or Production Manager Education & Experience: • High School Diploma or equivalent (preferred), • Prior experience navigating a computer system and computer software (a plus) Required Skills & Abilities: • Strong math and analytical skills, • Ability to meet deadlines, • Flexible and adaptable with working in various production assembly lines, • Ability to read prints and/or drawings (a plus), • Well organized, • Good attention to detail, • Good verbal communication skills Safety Requirements: • Employee will be required to wear the provided PPE per the role requirements, • Follow site safety and any department specific protocols, • Report safety hazards or potential safety hazards to reporting Supervisor, • Attend company safety meetings Physical Requirements: • Ability to stand for prolonged periods of time, • Must be able to lift and/or carry up to 50 pounds at a time on a regular basis, • Constant use of coordination and applying dexterity, • Frequent repetitive motions Perks: • Paid Time Off plus 10 Paid Holidays, • Health, Dental, Vision, Life and AD&D, and Voluntary insurance coverage options, • Health Savings Account, • 401(k) program with a company match, • Safety Shoes Reimbursement Program, • Wellness program, • $500 referral bonus TECTRAN is an equal opportunity employer. We do not discriminate based on race, color, religion, national origin, sex, age, disability, genetic information, or any other status protected by law or regulation. It is our intention that all qualified applicants are given equal opportunity and that selection decisions be based on job-related factors Hours: 6 a.m. – 4:30 p.m. Monday – Thursday

Job Description Overview For Those Who Like Being the Best, Join the Best in Pests. As an Orkin Home Services Inspector, you get the advantage of a highly persuasive pitch: top-notch protection from the industry leader with more than 120 years of experience. You’ll also have the satisfaction of helping homeowners protect their most valuable asset. It’s a role that combines your competitive drive and your desire to be part of a team. You’ll have the opportunity to maximize your financial potential with high-performance sales skills and contribute to the overall success of the business. And you can earn your way to an annual rewards trip honoring top performers. You’ll have more than a job—you’ll have a career with growth potential and benefits that go beyond the basics. This includes a company vehicle, competitive pay and a 401(k) program. Not to mention, you’ll receive opportunities to volunteer and give back. With Orkin’s award-winning training program, you’ll receive all the tools you need to succeed. That means no industry experience required to start building your career. Plus, if there’s one thing we know at Orkin, it’s that pests keep coming back, and that makes our industry recession resistant. Ready to start a career with staying power? Apply now! Responsibilities As a Home Services Inspector, you’ll be responsible for understanding Orkin’s termite protection services and how to make strategic recommendations to customers. By performing 360 inspections from attics to crawlspaces and everything in between, you’ll be able to solve problems and build trusted relationships ensuring homes and families are protected. Adept at listening to needs and clearly explaining practical solutions, you can win over customers with confidence and care. • Our sales pros earn top wages, recognition, and opportunities for annual awards trips!, • Serve as a problem solver for customers by utilizing the in-depth training provided to decide on the best overall pest solution for each customer's needs., • Achieve goals through prospecting new business and assigned leads—we have a robust advertising budget to provide you with leads., • Schedule sales appointments and meet with potential customers in their homes to explain Orkin’s products and services., • Inspect the interior and exterior of the customer’s home—don’t worry, we teach you how!, • Make recommendations to customers based on inspection and issues identified by addressing any questions, explaining the process and setting expectations., • Stay organized and prepare sales agreements using a company provided iPad – we will provide training on this too. What type of benefits will you receive? • Competitive earnings and a company vehicle with gas card, • Compensation is from $65,000 USD to $100,000 USD per year (base + commissions), • Company provided iPhone and iPad with sales software, • Comprehensive benefits package including medical, dental, vision, maternity, & life Insurance, • 401(k) plan with company match, employee stock purchase plan, • Paid vacation, holidays, and sick leave, • Employee discounts, tuition reimbursement, dependent scholarship awards, • Industry leading, quality, comprehensive training program Why should you choose Orkin? • Founded in 1901, Orkin is a global residential and business service provider who provides the most accurate, comprehensive, and efficient pest management services for both residential and commercial customers, • The Pest Management Industry is growing – and is a recession resistant line of business, • You have a service-oriented mindset that leads you to build loyalty and trust with customers, • You hold yourself responsible for commitments, • You value being part of a team, • You want to join a company that supports the community, • Orkin is financially stable and growing as the largest subsidiary of Rollins (NYSE: ROL), headquartered in Atlanta, GA Are you ready to join the Best in Pests? Qualifications What do you need to be successful? • No Experience Required – we’ll train you!, • High School Diploma or equivalent required, • Ability to obtain the appropriate pesticide license/certification if required (company paid), • Ability to work in the field independently and interact with our great customers, • We will consider for employment all qualified applicants in a manner consistent with the requirements of applicable state and local laws. What will my work environment be like? Candidates must meet physical job requirements and safely perform the job duties with or without accommodations: • Safely use a ladder within the manufacturer's weight capacity, • Lift and carry up to 50 lbs., • Safely access crawl spaces, attics, confined spaces, roof tops, etc. including the ability to climb or balance and stoop, kneel, crouch, or crawl, • Wear personal protective equipment (PPE) which sometimes requires an OSHA-compliant respirator, • Willing to work in different types of weather conditions Orkin is an Equal Opportunity/Protected Veterans/Individuals with Disabilities Employer

Job DescriptionBenefits: • Competitive salary, • Free uniforms, • Opportunity for advancement JOB DESCRIPTION: ** PART TIME - EVENING SHIFT • MONDAY - FRIDAY, • Approximately 4 Hours / Day, • 5:00 PM start time, • 20 Hours / Week, • Located in West Seneca, • MUST have reliable transportation Our essential team members enjoy: *Competitive Pay *Flexible Schedules *Career Path Opportunities *Paid Training Job Position Description: This position is responsible for creating cleaner and healthier environments for our customers buildings and grounds by performing the following duties and responsibilities. Duties include but not limited to: • Perform all cleaning duties for facilities using provided ServiceMaster products, tools and procedures, • Sweeping, mopping, polishing, trash removal, restroom cleaning, windows, dusting, • Maintain inventory of supplies and equipment., • Use proper PPE where required, • Opens and locks facilities, enable and disable security system as required.Physical Demands and Qualifications:, • Constant (up to 100%) standing, walking, pushing, kneeling, twisting, reaching, • Must be able to lift and/or carry up to 25lbs., • Ability to differentiate between cleaning products and uses, • 1-2 years experience as a custodian, janitor, or housekeeper a plus but not required, • Will provide on the job training to those with strong work ethic and willingness to learn., • The ability to be flexible and work at a fast pace in a multi-tasked job is a must., • Contribute to a positive work climate with a pleasant attitude, • Contribute to the overall team effort including being in uniform, dependable and on time, • Treat all co-workers and customers with courtesy and respect

Job Description Overview Tradesmen International is looking to expand our team of qualified Trade Professionals for current & future projects in and around Cheektowaga, NY. Most positions are first shift with a pay range of $25-35/hour based on experience & skill level. If you are a Drywall Installer / Finisher and want to work alongside other proven Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career! Job Scope: • Measure, Cut, and Fit Drywall Sheets for Installation on Walls and Ceilings, • Position and Secure Drywall Sheets to Metal or Wooden Studs, • Cut and Install Metal Corner Beads to Protect Exterior Corners, • Fill Joints, Holes, and Cracks with Compound using a Trowel and/or Broad Knife, • Smooth out Excess Compound and Sand over Dry Compound Responsibilities • Previous Drywall Experience, • Tools for the Trade, • Proper PPE must be worn, • OSHA 10 is Preferred Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Tradesmen+ Rewards Program – earn points for hours worked, • Vacation Pay, • Health insurance Tradesmen International is an EO employer - M/F/Veteran/Disability Click here to visit Tradesmen’s full website.

Job Description Location: Buffalo, NY Job Title: Residential Plumbing Field Supervisor Ready to transition from the field to a leadership role where you guide and mentor a team of plumbers? We're looking for an experienced plumbing professional to lead our service and installation teams in the Buffalo area. If you're a hands-on leader focused on quality, safety, and maximizing team efficiency, join us! In your role as the Plumbing Field Supervisor, you will be responsible for the daily supervision, coaching, and technical support for our residential plumbing technicians. You will ensure service quality, manage job flow, enforce safety standards, and act as a crucial link between the field and management to drive operational excellence. Responsibilities and Expectations * Supervise, mentor, and coach a team of residential plumbers, providing technical support and guidance on complex service and installation issues. * Oversee daily field operations, ensuring efficient dispatch, job completion, and adherence to established timelines and budgets. * Conduct regular job site inspections to monitor quality control, ensure compliance with all local codes, and address any on-site challenges immediately. * Enforce company-wide safety protocols, including the use of PPE and safety knowledge, with a preference for OSHA-10 standards. * Act as the final point of escalation for high-level customer service or technical issues, ensuring swift and satisfactory resolution. * Monitor team performance and productivity, ensuring technicians are meeting company standards and driving positive customer feedback. * Utilize mobile technology for field management; ServiceTitan experience is preferred for tracking jobs and technician performance. * Conduct ride-alongs and technical training sessions to promote continuous skill development within the team. Requirements * Required: Minimum of 3+ years of recent plumbing field experience (Service or Installation). * Strong technical plumbing knowledge across residential service, repair, and installation. * Prior supervisory or lead-level experience is strongly preferred (managing people, not just projects). * Strong knowledge of local plumbing codes and safety regulations is required. * Preferred: A valid Journeyman Plumber License (or Master Plumber License). * Preferred: OSHA-10 certification and demonstrated expertise in PPE and safety protocols. * Tech savvy and comfortable using mobile devices; ServiceTitan experience is preferred. * Must have a valid driver's license and maintain a clean driving record. What Can We Do for You? * Competitive Base Salary of $75,000 - $85,000 with bonus potential. * On-Target Earnings (OTE) up to $100,000. * Company Vehicle Provided. * A stable work environment where your growth is encouraged and supported. * Continuous and extensive training and development opportunities. * Medical, dental and vision insurance * 401k with company match * Life insurance, disability insurance and voluntary benefits are also offered The compensation for this position is expected to range between a base salary of $75,000 - $85,000 per year. This range is a good-faith estimate, based on the qualifications necessary for the position, including experience, training, and other considerations permitted by law. Factors that may be used when making an offer may include a candidate’s skills, experience, the expected quality and quantity of work, and internal pay alignment, as needed. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity or any other characteristic protected by law. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. Powered by JazzHR picFmgCD7m

Job Description About the Role: The Sand & Metal Blaster plays a crucial role in preparing surfaces for finishing and coating processes. This position involves using specialized equipment to remove contaminants, rust, and old paint from various materials, ensuring a clean and smooth surface. The end result of this work is to enhance the durability and appearance of products, contributing to overall quality and customer satisfaction. Attention to detail and adherence to safety protocols are essential, as the role involves working with potentially hazardous materials. Ultimately, the Sand & Metal Blaster helps maintain high standards in manufacturing and restoration projects. Responsibilities: • Operate sandblasting and metal blasting equipment to clean and prepare surfaces., • Inspect surfaces before and after blasting to ensure quality and adherence to specifications., • Maintain and troubleshoot blasting equipment to ensure optimal performance., • Follow safety protocols and wear appropriate personal protective equipment (PPE) at all times., • Proven experience in sandblasting or metal blasting., • Familiarity with safety regulations and practices in a blasting environment., • Knowledge of surface finishing processes., • Experience with various blasting materials and techniques, • High school diploma or equivalent.

Job DescriptionWachter's greatest asset is the people who work here. Join the Wachter family and chart your career path! Wachter is accepting applications for a Fire Alarm/Intrusion/Access Control Service Technician for work at various retail locations across the United States. We seek self-motivated and reliable technicians for service and special installation projects, who can work independently and find solutions to complete the job. Long-term employment with competitive pay and exceptional benefits for qualified candidates. We value relationships and invest in our employees. Benefits Package: Company Paid! • Medical, Dental, Prescription & Vision Benefits, • Life, AD&D, and LTD insurance, • Paid Vacation and Holidays, • Company-Matched 401K and IRA Retirement Savings, • Per-Diem paid when overnight travel is required, • Drive time and mileage paid for use of a personal vehicle when travel is required, • Company vehicle provided after orientation Requirements:, • Field installation experience in security environments: Fire Alarm /Intrusion / Access Control, • NICET certification (Preferred), • Current/valid state required Physical Security license and/or Life Safety license in the applicable technology., • Knowledgeable about NFPA standards, including NFPA 70 and 72, • Work schedule mainly during the day 8 am to 5 pm, with some night shifts., • Available and willing to work at heights of 20’-60’ on lifts., • Experience reading blueprints and site maps., • Experience with multiple Intrusion/Access system manufacturers is a plus., • Assist with pre-installation opportunities by designing and planning technical solutions., • Perform new installs and provide technical escalation support both on-site at customer locations as well as remotely via the phone and specialized tools., • Excellent customer relationship and communication skills; verbal and written., • Has basic PPE, and reliable transportation during the training period prior to issuing a company vehicle, • Computer/laptop/smartphone proficiency., • Basic understanding of Microsoft Office Products (Word, Excel, PowerPoint) is a plus., • Highly proficient with the use of email, spreadsheets, and the ability to learn internal systems., • Valid driver’s license with a clean driving record; no DUI or DWI in the last three years. Responsibilities:, • Install, troubleshoot, and repair cabling systems and equipment in IP Video, Access Control / Intrusion Alarm / LAN/WAN infrastructure, and wireless LAN., • Run low voltage cabling in commercial buildings, including drilling concrete walls and limited conduit bending work., • Complete all wiring, connections/terminations, and equipment installations ensuring that Access Control and Intrusion systems are complete with total customer satisfaction and contractual requirements., • Install, repair, or upgrade fire alarm systems and program control panels for fire alarm systems with the guidance of building plans and electrical layouts., • Mount sensors at appropriate locations, performing all necessary tasks, such as drilling holes for cabling and accessing locations such as crawlspaces or attics., • Complete all wiring, connections, and equipment installations ensuring that fire alarm systems are in compliance with electrical and fire codes., • Tests to ensure all newly installed fire alarm systems and component devices are operational., • Adhere to all required project safety requirements as set forth by Wachter, our customers, or OSHA., • Perform any other duties not specifically statedherein, but which your supervisor may assign., • Ensure all work complies with current codes and regulations., • Assist and collaborate with the Installation Team Lead or Project Manager regarding on-site work schedules and timely delivery of equipment., • Conduct tests to ensure all newly installed systems and component devices are operational.

Job Description Location: Buffalo, NY Job Title: Plumbing Install Crew Lead Ready to take the lead on residential and light commercial plumbing installation projects? We are looking for an experienced, highly skilled Plumber ready to manage and execute complex installations from start to finish. If you thrive on technical challenges, maintain high quality, and can effectively lead a team, join us! In your role as the Plumbing Install Crew Lead, you will be responsible for the execution, quality, and timely completion of all assigned installation projects. You will act as the working Foreman, guiding the crew, coordinating with supervisors, ensuring compliance, and delivering exceptional results on every job. Responsibilities and Expectations * Lead and execute all aspects of plumbing installations, including new construction, remodels, and system replacements for residential and light commercial projects. * Serve as the working Crew Lead/Foreman, directing the activities of the installation crew, ensuring efficient workflow, and maintaining a high standard of craftsmanship. * Coordinate with the Project Manager and supervisors on scheduling, materials, and resource allocation to meet project deadlines. * Ensure all installations strictly comply with local and state plumbing codes, regulations, and industry best practices. * Maintain a proactive focus on Personal Protective Equipment (PPE) and safety knowledge, ensuring the crew adheres to all job site safety protocols, including the preferred OSHA-10 standards. * Complete and manage all necessary installation paperwork and documentation accurately and promptly. * Utilize mobile technology for job management; ServiceTitan experience is a strong plus. * Provide technical training and mentorship to less experienced crew members. * Maintain a professional demeanor and appearance while interacting with clients, inspectors, and other trade personnel. Requirements * Required: Minimum of 3 years of dedicated plumbing installation experience. * Strong technical knowledge and proven ability to manage all phases of plumbing system installations. * Excellent leadership, communication, and problem-solving skills to manage a crew and resolve on-site issues. * Knowledge of all local plumbing codes is required. * Preferred: A valid Journeyman Plumber License. * Preferred: Experience with Personal Protective Equipment (PPE) and Safety Knowledge. * Preferred: OSHA-10 certification. * Preferred: CDL Class A with endorsement (to potentially transport large equipment or materials). * Tech savvy and comfortable using mobile devices for communication and job documentation; ServiceTitan experience is a plus. * Able to work independently, manage a team, and meet physical demands associated with construction and installation work. What Can We Do for You? * Competitive Compensation of $25.00 - $35.00/hr. * A stable work environment where your growth is encouraged and supported. * Continuous and extensive training and development opportunities. * Medical, dental and vision insurance * 401k with company match * Life insurance, disability insurance and voluntary benefits are also offered The compensation for this position is expected to range between $25.00 - $35.00 per hour. This range is a good-faith estimate, based on the qualifications necessary for the position, including experience, training, and other considerations permitted by law. Factors that may be used when making an offer may include a candidate's skills, experience, the expected quality and quantity of work, and internal pay alignment, as needed. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity or any other characteristic protected by law. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments.

Job DescriptionSalary: $85,000.00 to $110,000.00 base annually Montante Construction is seeking a Construction Project Safety Manager to join our growing team! If your skills, experience, and passion for safety at the job site align with this position, we would love to hear from you! About Us: Montante Construction is a full-service construction management company led by some of the preeminent construction professionals in the region. Our team helps clients define and manage the scope, schedule, budget, and ultimate completion of new construction projects, building expansions, and the rehabilitation of aging structures into contemporary uses. We utilize our technical knowledge, experience, and resourcefulness to improve efficiency and enhance client value, while providing unprecedented communication and transparency with our clients and project partners. About the Role: The Construction Project Safety Manager is responsible for ensuring safety job sites by managing safety programs, policies, and communication at site stakeholders to ensure a safe work environment on assigned project sites. Reporting to the Safety Manager, this role will work on an assigned project site to help ensure that requirements and reporting are being met according to the projects owner/client. Overnight travel will be required for this role, the current project assignment is in Big Flatts, NY near Elmira, NY , Horseheads, NY and Corning, NY. Safety Management • Enforce safety policies and procedures in accordance with federal, state, and local regulations., • Serve as the primary point of contact and subject matter expert (SME) for all safety-related inquiries and concerns on the project site., • Conduct weekly or as required site inspections and safety audits to identify potential hazards and ensure compliance with safety standards. Document and communicate findings to project teams and VP., • Ensure location is current with site required safety matters, including signage, processes, PPE, and documentation., • Collaborate with Safety Manager, project managers and site supervisors to address safety concerns and develop safety plans. Reviewing and ensuring the implementation of site-specific safety plans., • Investigate accidents and incidents to determine root causes and implement corrective actions to prevent recurrence. Document and communicate findings to Safety Manager., • Present debrief action plans to project teams and use information to inform general training plans., • Stay current with industry safety trends, regulations, and best practices. Data Management, Reporting, and Recordkeeping • Maintain and update company safety documentation, including safety manuals, injury reports and related documentation, OSHA records, boilerplate reports. Experience & Qualifications: • The following are the required experience and qualifications for this role:, • Bachelors degree in occupational health and safety and 3 years of construction safety management experience OR, • 5 years of experience in construction safety management with relevant certifications, including: Certified Safety Professional (CSP), Occupational Health and Safety Technician (OHST), or similar (preferred). OR, • 6 years of construction safety management experience and the OSHA 500 certification, • Ability to travel and stay overnight at job sites throughout NYS as assigned., • In-depth knowledge of OSHA regulations and other relevant safety standards., • In addition to the required experience and qualifications, candidates must possess the following to be successful in the role:, • Strong analytical skills with the ability to identify hazards and implement effective solutions., • Professional and thorough verbal and written communication with the ability to interact effectively with all levels of the organization both interpersonally and in group settings., • Proven ability to manage multiple tasks and prioritize effectively in a fast-paced environment., • Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint). Compensation Package: Montante Group offers a competitive total compensation package including: • Competitive base wages, • A comprehensive benefit package including medical insurance with employer contribution towards premium, medical opt out credit, employer paid life and long-term disability insurance!, • Voluntary Dental and Vision insurance, • Up to 15 days of paid time off (PTO) in year one, increasing with years of service, and paid holidays, • Financial insurance protection options which include short- and long-term disability, accidental death & dismemberment insurance, critical illness and accident insurance,legal and identity theft options, and pet insurance, • 401k Retirement Plan with employer match, • Bonus potential, • Travel compensation and reimbursements, when applicable, • Employee Assistance Program, • Community and Employee engagement events and initiatives

Job Description🔥 Structural Welder – First Shift (7:00 AM – 3:30 PM) Buffalo, NY PAY: $26-31+/HR Join a growing industry leader in custom‑engineered industrial systems. As a Structural Welder, you’ll fabricate high‑quality metal components used in power, oil & gas, and manufacturing applications. If you take pride in precision welds, enjoy working with aluminum and stainless, and want to contribute to meaningful, long‑term projects, this role is for you. 🌟 Why You’ll Love Working Here This company values craftsmanship, teamwork, and long‑term growth. You'll enjoy: • 💼 Full medical, dental & vision benefits, • 💰 401(k) eligibility after 6 months, • 🔒 Guaranteed 40 hours/week with optional OT, • 📈 Opportunities for advancement in an expanding company, • 🍽️ Holiday lunches & team events (including an annual venison cookout), • 🤝 Supportive leadership and a stable work environment, • 🛠️ Work with a team of skilled tradespeople on custom, high‑impact projects🛠️ What You’ll Do, • Weld and fabricate structural components for custom filtration skids, • Work with aluminum, stainless steel, and various structural metals, • Read and interpret blueprints, schematics, and build specifications, • Ensure all welds meet strict safety, quality, and project requirements, • Perform inspections and tests to verify structural integrity, • Maintain a clean, organized workstation and fabrication area, • Collaborate with team members to solve fabrication challenges, • Assist in mentoring junior welders as needed📚 What You Bring, • Minimum 3 years of structural/MIG welding experience; TIG competency preferred, • Proficiency welding aluminum, stainless steel, and carbon steels, • Ability to interpret technical drawings, prints, and schematics, • Strong understanding of welding safety standards and shop safety practices, • Experience performing quality checks and structural weld inspections, • High attention to detail and commitment to producing quality work, • Ability to maintain a safe, organized, efficient workspace⭐ Nice‑to‑Have Skills, • Welding certifications (AWS or equivalent), • Familiarity with PPE standards and shop safety protocols, • Ability to lift and move heavy materials throughout the shift, • Open and well‑ventilated, • Not climate‑controlled (seasonal temperature changes apply), • Active with fabrication, assembly, and material movement Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Buffalo,NY. Application Deadline This position is anticipated to close on Apr 6, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Title: Quality Assurance Specialist – RMA Department: Quality Reports To: Quality Engineer Job Status: Full-Time FLSA Classification: Non-Exempt Hours: Monday – Friday, 7:30 a.m. – 4 p.m. Salary/Wage Rate: $24.00 - $29.00/hour Tectran Manufacturing Inc. is an industry-leading manufacturer of air, hydraulic, and electrical systems for the transportation industry, serving heavy-duty tractor-trailer and bus markets. We are committed to delivering innovative, durable, and high-performance products that meet demanding customer and regulatory requirements. Job Summary The Quality Assurance & RMA Coordinator manages the full Return Merchandise Authorization (RMA) lifecycle while supporting Quality Assurance initiatives that improve product reliability and customer satisfaction. This role combines hands-on failure analysis, regulatory compliance, data reporting, and cross-functional collaboration to drive continuous improvement and reduce product returns. Responsibilities: RMA Management & Failure Analysis • Manage end-to-end RMA process from intake through disposition, • Review and validate warranty eligibility, • Perform product teardown, testing, inspection, and root cause analysis, • Determine and communicate disposition (repair, replace, credit, reject, return to stock), • Track and analyze RMA metrics, including turnaround time and failure trends, • Inspect and evaluate raw materials, assemblies, and finished goods, • Perform and document testing per internal and customer requirements, • Investigate non-conforming materials (NCMR) and coordinate containment and rework, • Support Corrective and Preventive Actions (CAPA), • Ensure compliance with DOT, FMVSS, ISO 9001, ISO 14001, SAE, and other applicable standards, • Partner with Engineering on root cause investigations and product improvements, • Provide feedback to Manufacturing on defect trends and systemic issues, • Collaborate with Production, Supply Chain, Customer Service, and suppliers to resolve quality concerns, • Participate in continuous improvement initiatives to reduce RMAs and improve processes Education & Experience: • High school diploma or equivalent required, • Experience in product failure analysis and material evaluation, • Experience in a manufacturing or distribution environment preferred, • Electro-mechanical product experience preferred, • Bilingual (English/Spanish) a plus Technical Skills • Proficiency with inspection equipment (CMM, optical comparators, hand measurement tools), • Ability to read and interpret technical drawings/blueprints, • Working knowledge of manufacturing and assembly processes, • Experience with quality tools (5-Why, Fishbone, Pareto, 8D), • Proficiency in Microsoft Office, • Working knowledge of Internal Auditing; experience with planning and executing audits preferred, • Experience with basic in-house calibration of precision hand tools (calipers, micrometers) is preferred but not required Core Competencies: • Strong analytical and problem-solving skills, • Excellent written and verbal communication, • Highly organized and detail-oriented, • Self-motivated, proactive, and results-driven, • Collaborative team player Safety Requirements: • Employee will be required to wear the provided PPE per the role requirements, • Follow site safety and any department specific protocols, • Report safety hazards or potential safety hazards to reporting Supervisor, • Attend company safety meetings Physical Requirements: • Prolonged computer work and desk time, • Frequent standing, walking, and bending throughout facility, • Ability to lift up to 50 lbs, • Frequent use of hand dexterity and near vision Perks: • Health, Dental, Vision, Life and AD&D, and various voluntary insurance coverages, • 401(k) program with a company match, • Wellness program, • Paid time off (PTO) and holiday pay (10 days annually), • $500 referral bonus TECTRAN is an equal opportunity employer. We do not discriminate based on race, color, religion, national origin, sex, age, disability, genetic information, or any other status protected by law or regulation. It is our intention that all qualified applicants are given equal opportunity and that selection decisions be based on job-related factors. Monday - Friday, 7:30 a.m. - 4 p.m.

Job Description Welder / Fabricator – 2nd Shift (3:30 PM–Midnight) Location: Buffalo, NY Schedule: 2nd Shift | 3:30 PM – 12:00 AM | Monday–Friday Employment Type: Full-Time | Overtime Available Industry: Industrial Manufacturing • Structural Steel • Modular Fabrication Job Overview We are seeking an experienced Mechanical Welder / Fabricator for our 2nd Shift (3:30 PM–Midnight) industrial manufacturing operations. The Mechanical Welder / Fabricator will fit, tack, weld, assemble, and repair steel components, structural assemblies, and production parts using MIG/GMAW, TIG/GTAW, and other welding processes in a fast-paced fabrication environment. This role is ideal for candidates with experience in manufacturing welding, structural steel welding, blueprint reading, mechanical assembly, production welding, and industrial metal fabrication. Daily Responsibilities As a 2nd Shift Mechanical Welder / Fabricator, you will: Welding & Fabrication • Fit, tack, and weld carbon steel, stainless steel, and low-alloy steel using MIG/GMAW, TIG/GTAW, and manual welding techniques., • Weld assemblies, sub-assemblies, brackets, channels, angles, and modular components per engineering drawings., • Read and interpret blueprints, weld symbols, detail drawings, and fabrication schematics., • Measure, cut, and layout materials using calipers, squares, tape measures, and fabrication tools., • Fabricate fixtures and support tools based on engineering sketches., • Assemble welded components into larger structures, platforms, frames, or modular units., • Inspect welds for accuracy, penetration, and quality., • Repair, rework, or correct fabrication issues and dimensional deviations., • Meet production targets, quality standards, and labor-hour requirements during 2nd shift operations., • Maintain welding machinery, tools, and PPE in safe working condition., • Follow OSHA rules, AWS standards, and internal safety guidelines., • Complete shop order documentation, time sheets, and necessary reports. Requirements: • Proven experience as a Welder, Fabricator, MIG Welder, TIG Welder, or Industrial Welder., • Skilled in MIG, TIG, Stick, GMAW, GTAW, and related welding processes., • Experience using electrical and manual tools (angle grinders, saws, calipers, clamps, squares, measuring tools)., • Ability to read and interpret technical drawings, diagrams, and welding blueprints., • Knowledge of welding safety standards, weld quality requirements, and inspection practices., • Ability to lift 50 lbs and perform physical tasks including bending, kneeling, overhead work, and climbing., • Strong attention to detail and quality craftsmanship., • Willingness to work 2nd shift (3:30 PM–Midnight) and overtime as needed. Preferred Skills / Qualifications • Welders should have AWS Certification (GMAW, 3G Vertical Up, 4F Overhead)., • Mechanical assembly experience in manufacturing or fabrication environments., • Experience welding carbon steel, stainless steel, and alloy steels., • Knowledge of torch cutting, plasma cutting, and GTAW/TIG welding., • Understanding of manufacturing tolerances and measurement verification., • Ability to work independently and as part of a team on 2nd shift.Company DescriptionGTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.

Job DescriptionSalary: $85,000.00 to $110,000.00 base annually Montante Construction is seeking a Construction Project Safety Manager to join our growing team! If your skills, experience, and passion for safety at the job site align with this position, we would love to hear from you! About Us: Montante Construction is a full-service construction management company led by some of the preeminent construction professionals in the region. Our team helps clients define and manage the scope, schedule, budget, and ultimate completion of new construction projects, building expansions, and the rehabilitation of aging structures into contemporary uses. We utilize our technical knowledge, experience, and resourcefulness to improve efficiency and enhance client value, while providing unprecedented communication and transparency with our clients and project partners. About the Role: The Construction Project Safety Manager is responsible for ensuring safety job sites by managing safety programs, policies, and communication at site stakeholders to ensure a safe work environment on assigned project sites. Reporting to the Safety Manager, this role will work on an assigned project site to help ensure that requirements and reporting are being met according to the projects owner/client. Overnight travel will be required for this role, the current project assignment is in Schoharie, NY near Schenectady, NY and Cobleskill, NY. Safety Management • Enforce safety policies and procedures in accordance with federal, state, and local regulations., • Serve as the primary point of contact and subject matter expert (SME) for all safety-related inquiries and concerns on the project site., • Conduct weekly or as required site inspections and safety audits to identify potential hazards and ensure compliance with safety standards. Document and communicate findings to project teams and VP., • Ensure location is current with site required safety matters, including signage, processes, PPE, and documentation., • Collaborate with Safety Manager, project managers and site supervisors to address safety concerns and develop safety plans. Reviewing and ensuring the implementation of site-specific safety plans., • Investigate accidents and incidents to determine root causes and implement corrective actions to prevent recurrence. Document and communicate findings to Safety Manager., • Present debrief action plans to project teams and use information to inform general training plans., • Stay current with industry safety trends, regulations, and best practices. Data Management, Reporting, and Recordkeeping • Maintain and update company safety documentation, including safety manuals, injury reports and related documentation, OSHA records, boilerplate reports. Experience & Qualifications: • The following are the required experience and qualifications for this role:, • Bachelors degree in occupational health and safety and 3 years of construction safety management experience OR, • 5 years of experience in construction safety management with relevant certifications, including: Certified Safety Professional (CSP), Occupational Health and Safety Technician (OHST), or similar (preferred). OR, • 6 years of construction safety management experience and the OSHA 500 certification, • Ability to travel and stay overnight at job sites throughout NYS as assigned., • In-depth knowledge of OSHA regulations and other relevant safety standards., • In addition to the required experience and qualifications, candidates must possess the following to be successful in the role:, • Strong analytical skills with the ability to identify hazards and implement effective solutions., • Professional and thorough verbal and written communication with the ability to interact effectively with all levels of the organization both interpersonally and in group settings., • Proven ability to manage multiple tasks and prioritize effectively in a fast-paced environment., • Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint). Compensation Package: Montante Group offers a competitive total compensation package including: • Competitive base wages, • A comprehensive benefit package including medical insurance with employer contribution towards premium, medical opt out credit, employer paid life and long-term disability insurance!, • Voluntary Dental and Vision insurance, • Up to 15 days of paid time off (PTO) in year one, increasing with years of service, and paid holidays, • Financial insurance protection options which include short- and long-term disability, accidental death & dismemberment insurance, critical illness and accident insurance,legal and identity theft options, and pet insurance, • 401k Retirement Plan with employer match, • Bonus potential, • Travel compensation and reimbursements, when applicable, • Employee Assistance Program, • Community and Employee engagement events and initiatives

Job DescriptionJob Title: Fleet Maintenance MechanicJob Description We are seeking a skilled Fleet Maintenance Mechanic to join our team. You will be responsible for performing preventative maintenance, repairs, and diagnostics on a variety of fleet vehicles, including trucks, trailers, and material handling equipment. This role requires expertise in hydraulic systems, engine repairs, and automotive maintenance. Responsibilities • Diagnose failures of vehicles and disassemble, repair, and reassemble parts as necessary., • Conduct brake pad repairs and oil changes on fleet vehicles., • Perform preventative maintenance and repairs on fleet vehicles, including trucks, trailers, and material handling equipment., • Maintain accurate documentation and vehicle software systems, such as work orders and vehicle records., • Assist Lead Technicians with larger fleet repairs, including engine repairs, SCR diagnostics, and electrical and mechanical troubleshooting.Essential Skills, • Experience with hydraulic equipment, fleet maintenance, and automotive mechanics., • Proficiency in preventive maintenance, engine diagnostics, and diesel maintenance., • Ability to diagnose and repair hydraulic, electrical, and mechanical systems.Additional Skills & Qualifications, • Certifications in automotive repair are highly preferred. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Buffalo,NY. Application Deadline This position is anticipated to close on Apr 10, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionDescription: Carrier Process Equipment Group (CPEG) offers customers a comprehensive line of large industrial processing equipment for a wide variety of industries. By combining engineering expertise including high tolerance fabrication and assembly, we design and manufacture custom bulk processing equipment and custom fluid solutions. Please visit us at to see the full scale of our product lines and solutions including the diverse family of brands who make up our portfolio. We are looking for an Electrical Controls Engineer at our Tonawanda, NY location. This full-time, exempt position is responsible for the independent and collaborative development, testing, and documentation of general automation and PLC/HMI control systems’ hardware and software, pneumatic systems, and all documentation and diagrams associated with. Primary responsibility for factory testing, commissioning, and field acceptance of our scope of products. This role will include a mix of office time, shop time, and occasional travel internationally and domestically. The Electrical Controls Engineer will also have responsibility for electrical schematics, junction box layouts, complicated engineering designs, and support of any team members. They should have a firm understanding of governing electrical codes and engineering principles. They are well rounded and excited about all areas of their product, including hardware, software, testing, and support and are able to apply critical thinking to system design & drafting, product improvements, tool and workflow usage, customer support, and general problem-solving situations. Functions will generally be conducted under the guidance of experienced engineering staff but do require independent problem solving and decision making. Schedule Monday-Friday, 8 a.m.- 4:30 p.m. Requirements: • Read and interpret internal, and customers’ provided electrical specifications and sales literature., • Design drawing packages and architecture for provided electrical or PLC/HMI control systems., • Ensure compliance with applicable design codes (NEC/CEC/CE/IEC w/ Occasional Others), • Design PLC software control and HMI visualization for a variety of equipment types., • Occasional shop testing of electrical systems. Critical safety focus and use of PPE required., • Occasional field commissioning or testing of final products at customer facilities, • Possess knowledge of instrumentation, signals, and their applications, • Familiar with a variety of electrical terminology, practices, and procedures., • Provide required support during fabrication of design and during NRTL inspection., • Assist project engineers with technical concerns as required., • Ability to multitask between 5-7 projects simultaneously – appropriate clerical organization is critical. Competitive Benefits • Generous paid time off as well as 80 hours of holiday pay each year., • Ability to become an Employee Owner. This benefit is fully funded by the company—no employee contribution required—and builds value for you over time based on the company's performance. While results vary from year to year, the ESOP consistently delivers retirement benefits that exceed those of a typical 401(k) match., • Medical, Dental, and Vision Insurance. We provide a company contribution with Health Savings Account (HSA) participation. Flexible Spending Accounts (FSAs) are also available for healthcare and dependent care expenses, regardless of whether you are enrolled in a company medical plan., • Company paid Basic Life Insurance, Accidental Death & Dismemberment (AD&D), and Long-Term Disability coverage, along with supplemental Short-Term Disability coverage (company pays 50% of premium)., • Voluntary coverages such as additional life insurance, accident insurance and more., • Employee Assistance Program. Our EAP offers free, confidential support including legal and financial consultations, counseling services, estate planning, travel assistance, and work-life resources such as childcare, eldercare, and health advocacy., • Employee Referral Program bonus., • Educational Assistance., • Career Advancement. CPEG is 100% employee-owned and led by a dynamic executive team of talented individuals who have risen through the management structure., • Option to contribute to a 401(k) plan with flexible loan feature—invest in your future while keeping access to your funds if you need them. *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position’s qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays.

Job DescriptionCompany Description Founded in 1978, California Closets has built a reputation as the leader and design authority in premium space management, delivering custom-designed organizational solutions and exceptional service. We believe home is more than just a place — it should be a source of creativity, comfort, and connection. From beautiful walk-in closets and entertainment centers to versatile pantries and home offices, we design custom storage solutions that add value to your life and home by making space for what belongs. Think of it as ‘practical magic.’ Job Description The field Installer installs custom designed residential storage systems and accessories using a variety of luxury materials. A successful candidate will have experience with hand and power tools, measurements and the ability to provide exceptional customer service to our clients. What We Offer: California Closets has both company-owned and franchise locations. This location is company-owned, therefore earns the following benefits: • Health insurance – Medical, Dental, and Vision, • PTO days and paid holidays, • 401K retirement plan with company match, • Transporation from Company’s location to and from customer job sites will be provided, • Company tools and PPE provided, • Guaranteed 40 hours/week with overtime potential, • Day shift hours, • Grow your career with us – many promotional opportunities available Duties and Responsibilities: • Perform skilled and semi-skilled carpentry work to install custom storage systems such as closets, cabinets, offices, and other spaces in the home or commercial buildings., • Utilize company-provided CAD drawings\blueprints to install systems properly and efficiently., • Assemble and install systems of varying complexity., • Assists in the removal and installation of materials in customer homes., • Maintain shop tools and equipment in safe working order (tools are provided)., • Install systems independently or with team members depending on the size of the job., • Provide a high level of customer service for in-home installations., • Maintain safety standards at all time., • Responsible for driving to and from customer sites and operating a company-provided vehicles in a safe manner., • Perform other duties and responsibilities as assigned by the supervisor.Qualifications, • Must maintain a valid driver's license and clean driving record, • High School diploma or equivalent, • Experience with common hand and power tools, • Trade or vocational school experience desirable, • Cabinetry or carpentry skills desirable, • Strong verbal and written communication and listening skills, • Able to walk, lift 50 pounds, reach, stoop, stand, grasp, balance, climb stairs, kneel, and crouch Additional Information Find us on Facebook, YouTube, and Instagram We are an equal opportunity employer. We E-Verify. All your information will be kept confidential according to EEO guidelines. Privacy Policy: Terms and Conditions:

Job Description Join the Hunter Truck Family – Now Hiring Diesel Mechanic Technicians! ???? Location: Buffalo, NY ???? Position Type: Full-Time, Non-Exempt Drive Your Career Forward with Hunter Truck Looking for a career with a company that values integrity, teamwork, and great service? Since 1938, Hunter Truck has been a trusted, family-owned Peterbilt dealer providing top-tier trucking solutions across Pennsylvania, West Virginia, New Jersey, and New York. Now, we’re growing—and want YOU on our team! We’re searching for skilled Diesel Mechanic Technicians at all levels to join our Buffalo branch. Whether you’re an experienced professional or just starting your career, this is your chance to be part of a team that supports your success! Sign-On Bonus ???? Earn up to $5,000 for Expert and Master-Level Diesel Technicians! At a Glance ???? Schedule: Day, afternoon, and evening shifts available, Branch is open from 7 am to 12 am ???? Address: 2370 Walden Ave, Buffalo NY 14225 ???? Pay: $17.00 - $45.00/hour - based on experience What You’ll Do As a Diesel Technician, you will perform maintenance and repairs on trucks, from routine work to advanced diagnostics. Your responsibilities include: • Perform routine and advanced maintenance and repairs independently or as part of a team, • Diagnose and repair vehicle malfunctions, ensuring work meets dealership and factory standards, • Assist with major repairs and collaborate with other technicians on complex issues, • Communicate with parts department to obtain required components, • Save and tag parts for warranty or customer requests, • Complete detailed documentation for all repairs and warranty claims, • Road test vehicles to verify repairs and performance, • Stay current on manufacturer technical bulletins and specifications, • Work as part of a team to meet customer needs and deliver exceptional service What We’re Looking For • High School Diploma or GED, • 1-3 months related experience or training, or equivalent combination of education and experience, • Valid Driver’s License (must meet company insurability standards), • Vocational/technical school training or equivalent preferred, • Regular standing, walking, and use of hands and arms, • Occasional lifting/moving up to 50 lbs, frequent lifting up to 100 lbs Why Join Hunter Truck? ✅ Competitive Pay + Shift Differentials & Incentive Plan ✅ Sign-On Bonus for Expert & Master-Level Technicians ✅ Medical, Dental, Vision, Life & Disability Insurance ✅ 401(k) with Company Match ✅ Paid Training & Career Growth Opportunities ✅ Toolbox Relocation Assistance, Uniforms & PPE Provided ✅ Tuition Reimbursement & Paid Time Off ✅ Stable, Family-Owned Company Since 1938 ✅ Team-Oriented Culture Hunter Truck is an Equal Opportunity Employer. All candidate offers are subject to a pre-employment background check and drug screening.

Job Description Join the Hunter Truck Family – Now Hiring 2nd Shift Diesel Mechanic Technicians! ???? Location: Buffalo, NY ???? Position Type: Full-Time, Non-Exempt Drive Your Career Forward with Hunter Truck Looking for a career with a company that values integrity, teamwork, and great service? Since 1938, Hunter Truck has been a trusted, family-owned Peterbilt dealer providing top-tier trucking solutions across Pennsylvania, West Virginia, New Jersey, and New York. Now, we’re growing—and want YOU on our team! We’re searching for skilled Diesel Mechanic Technicians at all levels to join our Buffalo branch. Whether you’re an experienced professional or just starting your career, this is your chance to be part of a team that supports your success! Sign-On Bonus ???? Earn up to $5,000 for Expert and Master-Level Diesel Technicians! At a Glance ???? Schedule: Monday through Friday, 3:30pm to 12:00pm ???? Address: 2370 Walden Ave, Buffalo NY 14225 ???? Pay: $17.00 - $45.00/hour - based on experience; 2nd Shift is eligible for a pay differential What You’ll Do As a Diesel Technician, you will perform maintenance and repairs on trucks, from routine work to advanced diagnostics. Your responsibilities include: • Perform routine and advanced maintenance and repairs independently or as part of a team, • Diagnose and repair vehicle malfunctions, ensuring work meets dealership and factory standards, • Assist with major repairs and collaborate with other technicians on complex issues, • Communicate with parts department to obtain required components, • Save and tag parts for warranty or customer requests, • Complete detailed documentation for all repairs and warranty claims, • Road test vehicles to verify repairs and performance, • Stay current on manufacturer technical bulletins and specifications, • Work as part of a team to meet customer needs and deliver exceptional service What We’re Looking For • High School Diploma or GED, • 1-3 months related experience or training, or equivalent combination of education and experience, • Valid Driver’s License (must meet company insurability standards), • Vocational/technical school training or equivalent preferred, • Regular standing, walking, and use of hands and arms, • Occasional lifting/moving up to 50 lbs, frequent lifting up to 100 lbs Why Join Hunter Truck? ✅ Competitive Pay + Shift Differentials & Incentive Plan ✅ Sign-On Bonus for Expert & Master-Level Technicians ✅ Medical, Dental, Vision, Life & Disability Insurance ✅ 401(k) with Company Match ✅ Paid Training & Career Growth Opportunities ✅ Toolbox Relocation Assistance, Uniforms & PPE Provided ✅ Tuition Reimbursement & Paid Time Off ✅ Stable, Family-Owned Company Since 1938 ✅ Team-Oriented Culture Hunter Truck is an Equal Opportunity Employer. All candidate offers are subject to a pre-employment background check and drug screening.

Job Description Quality Control Technician Facility: Buffalo, NY General Description The Quality Technician is responsible for ensuring the highest possible quality of all products manufactured. The position requires that all facets of the production inspection process be monitored including, but not limited to, raw material certifications, in-process quality controls, and final inspections. Specific Duties · Inspect all incoming raw materials to ensure their integrity and that all material specifications have been met. · Ensure that all products being shipped are inspected within quality standards and recorded into the system with all the necessary information. · Perform CMM inspection on setup parts and parts coming from in-process production as needed for sampling. · Monitor the preparation of all shop work orders, travelers, in-process inspection forms, and related documentation to ensure that they are consistent with the ISO standards as stated in the company’s quality manual. · Monitor all quality control inspections throughout the production process to ensure that the company complies with its internal quality standards, as well as those outlined in our ISO – 9001-2015 standards. · Ensure that all quality-measuring devices are regularly calibrated per our internal standard. · Conduct in process inspection and audits when directed. · Keep files of all production jobs and the raw materials records and quality control reports related to each task. · Issue the final inspection report and/or sign off for each job completed in the shop. · Communicate all quality issues to management promptly, along with recommendations for any corrective actions that may be necessary. · Perform paint line inspections as needed. · Follow directions from the Quality Control Supervisor. · Follow all applicable environmental, health and safety rules and procedures and immediately report all dangerous situations, near-misses, and injuries. · Participate in developing and updating risk assessments and review all applicable risk assessments annually. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Qualifications · Previous experience working in a production machining environment preferred. · Ability to read and interpret blueprints, 1st article inspections, receiving, shipping, and painting inspection. · PPAP experience a plus. · Must be proficient in Microsoft Office applications. · Manual inspection experience. Proficient using micrometers, calipers, height gages, and all standard shop measuring tools. · CMM Operator/Programmer experience a plus Hexagon PCdimis software. Physical Demands · The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully. · The employee frequently is required to stand; walk, talk and hear. The employee is occasionally required to climb or balance and stoop. A large degree of lifting (moderate to heavyweight), bending, squatting and maneuvering. Specific vision abilities required by this job include close vision, for viewing a computer terminal distance vision, peripheral vision, depth perception vision for moving objects and ability to adjust focus. · This position is not substantially exposed to adverse environmental conditions. · The ability to work with chemicals in the proper environment and while wearing PPE. Personal Protective Equipment The following list of PPE is required while in the manufacturing area: · Safety Glasses conforming to ANSI Z87.1 or higher · Steel Toe Safety Shoes conforming to OSHA General Industry Standards 29 CFR 1910 · Hearing protection conforming to OSHA General Industry Standards 29 CFR 1910 · The ability to wear a dust mask conforming to OSHA General Industry Standards 39 CFR 1910.134 · Additional PPE may be required depending on the department Hutchinson Industries, Inc. is an equal opportunity employer. This is a non-exempt position. Hutchinson Industries, Inc. reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between Hutchinson Industries, Inc. nor the employee, and either one may terminate employment without notice at any time.