Trabajos preventive maintenance en Syracuse, New YorkCrear alertas

Job Description Adecco is currently assisting a large company in the Cicero / North Syracuse, NY area with recruiting for a 3rd Shift Fleet Mechanic. This is a direct-hire opportunity paying $24 to 30/hour DOE plus shift differential supporting a busy transportation operation. You will perform preventive maintenance, basic diagnostics, and repairs on tractors, trailers, dollies, and related fleet equipment. This position is best suited for a mechanically inclined technician with diesel experience who can identify developing equipment issues and complete routine repairs with limited assistance. Responsibilities • Perform preventive maintenance services on tractors, trailers, dollies, and fleet equipment., • Assist with diagnosing and repairing diesel engines and related components., • Inspect equipment and identify developing mechanical problems or potential failures., • Perform basic repairs on 12-volt electrical systems., • Complete routine mechanical repairs and maintenance documentation., • Use computerized systems to enter service information and review maintenance records., • Perform basic welding tasks as needed., • Maintain a safe, clean, and organized work area. Qualifications • General knowledge of diesel engines and associated components., • Experience performing preventive maintenance on commercial vehicles or fleet equipment., • Mechanical aptitude and ability to diagnose and repair basic equipment issues., • Familiarity with tractor, trailer, and dolly components., • Basic knowledge of 12-volt electrical systems., • Basic computer skills., • Basic welding knowledge or experience preferred., • Air-conditioning certification and New York State Inspection certification are a plus., • Must provide personal tools appropriate for the work being performed., • Ability to work independently and as part of a maintenance team. Schedule • Third shift; start and end times may vary based on operational needs., • Candidates must be available to work flexible overnight hours between approximately 9:00 PM and 7:00 AM. Compensation and Benefits • Starting pay is $24.00–$30.00 per hour, depending on experience, plus a shift differential., • Benefits include 401(k), Dental insurance, Employee assistance program, Health insurance and Life insurance Pay Details: $24.00 to $30.00 per hour Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.adecco.com/en-us/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Position Description Ryder is hiring aMaster LevelDiesel Technician in Liverpool, New York — providing a stable company for your career with weekly pay and excellent benefits. Hear it from a Ryder Technician Employee Here: https://RyderCareers.Video/T4DieselMechanicLife • Hourly Pay: $43.00 per hour, • Certification Bonus of $100 for each New ASE Certification Obtained up to $700, • Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year, • Sign On Bonus: Ryder Pays You $2500 at 30 days and $2500 at 90 days, • Schedule: Monday-Friday, • Hours: First Shift 7:00 am - 3:30 pm We provide the best State-of-the-Art Diagnostics and Tools to all Ryder Maintenance Repair Mechanics who work on Heavy Duty Vehicles Apply Here with Ryder Today Spots are filling fast — click apply now to secure your spot. All the benefits you expect — without the wait. • Medical, Dental, Vision after 30 days, • Earn PTO starting Day 1. Up to 80 hours accrued in 1st year, • Yearly merit pay increases, • 401 (k) company match, • PPE, uniforms, and boot allowance, • Paid training that keeps you ahead, • Safety‑first workplace & State-of-the-art equipment, • Top Tech Competition: Earn $250 – $50,000 per year, • U.S. military veterans - extra paid day off, • 15% company stock discount, • Up to $5,000 in Tech tuition repayment, • 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure), • Employee discounts on tools, vehicles, travel, tech & more Click Here to See All Ryder Careers:https://www.ryder.com/careers/diesel-technicians At Ryder, you will be recognized and respected for your expertise and skill by joining a community of proud women and men in logistics, including many Military Reservists and Veterans. Ryder provides a clear path for career development and advancement. Share Ryder jobs with people you know-get paid for it. Ryder offers unlimited bonuses up to $1,500 for every hired Diesel Mechanic Technician and Fuel Service Employee. EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, required, • Four (4) years or more Relevant work experience, preferred, • Valid Commercial Driver License (CDL) CLASS A,preferred, • All other certification as required by location, required ADDITIONAL REQUIREMENTS: • Ability to perform all T3 tasks, • Must have demonstrated advanced analytical and repair skills in vehicle maintenance, • Effective interpersonal communication skills, • Must have basic computer skills: PC, Windows, mouse, etc., • Must be able to lift up to 50 pounds, • Must be available to work shift work/weekends and on call duty as required, • Prefer ASE Certification in PM, Brakes, A/C, electrical, Electronics or ASE Master Mechanic, • Required to operate shop computers and diagnostic test equipment proficiently, • Must have minimum tool requirement, • Must road test vehicles as necessary, • Demonstrated ability to coach/mentor/influence others, • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Must be able to obtain CDL within 6 months after hire, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test, • Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities • SBTIII trained within 180 days (SBT220), • Complete all OEM on-line diagnostic scan tool software courses as required by location fleet mix. (completed within 365days), • Complete Instructor led OEM courses as required to support location fleet mix., • Performs vehicle maintenance and repair duties including:, • Performs standard vehicle maintenance, • Performs preventive maintenance, • Performs complex repairs with minimal (if any) support., • Demonstrate the ability to access and use internal and external maintenance documents, • Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable., • Performs remote triage to with RCRC and customers to determine best solution to assist roadside breakdowns., • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task., • Instructs and advises other technicians regarding maintenance repair procedures and diagnostics, • Coaches/Mentors other level technicians, • Advise shop management and other technicians on shop repairs, • Utilizes key functions of Shop Management System and electronic documentation available, • Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT), • Other support duties as required to support operations. These could include but are not limited to Service Island support. Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 4 days ago (9/25/2026 8:17 AM) Requisition ID 2026-211639 Location (Posting Location) : State/Province NY Location (Posting Location) : City LIVERPOOL Location (Posting Location) : Postal Code 13088 Category Technicians/Service Employees6 Employment Type Regular-Full time Travel Requirements 0-10% Position Code 1000068 Min Pay USD $43.00/Hr. Max Pay USD $43.00/Hr.

Job Description About Stampede Ventures, Inc. Stampede Ventures provides a diverse portfolio of full-service construction, renovation, and civil work to meet the needs of Government and private sector customers. We leverage our experience to provide our customers with the best possible pricing and high-quality service on all projects we perform. Our senior management team has more than 100 years of facility maintenance, repair, renovation and construction experience, primarily serving the U.S. Government. About this position: HVAC Mechanic Location - Syracuse, NY The Essential Duties and Responsibilities are intended to present a descriptive list of the range of duties performed for this position and are not intended to reflect all duties performed within the job. Other duties may be assigned. To perform this job successfully, an individual must be able to satisfactorily perform each essential duty. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the position. Wage/Salary Range: $24-45/per hr. Applicants will be notified via phone or email within ten (10) business days of submittal. Essential Duties & Responsibilities • Travel daily to perform needed preventive maintenance on the HVAC and other equipment as needed., • Complete PM checklists and close out the work order in Maximo. Uploading documents and photos as needed to document work performed., • Perform minor repairs on building equipment as needed during visits. (Faucets, flushometers, change light bulbs), • Work with subcontractors for services we do not have capability to offer., • Maintain excellent customer relations during job performance Interacting with all levels of management, • Carry out repair, maintenance, or installation of equipment for the generation, utilization, or distribution of commercial systems, • Perform inspection, maintenance, adjustment, and repair of equipment to ensure constant and reliable indoor air comfort, as well as laboratory or critical environments, • Handle and repair test equipment, complex centrifugal chillers, direct expansion and chilled water-based cooling systems, large air handlers, electronic and pneumatic direct digital control systems, and air distribution systems, • Operate, procure, introduce, and get back HFC, HCFC, and CFC refrigerants, • Perform repairs and maintenance of reach in, walk in, stand alone ice machines, central plan chillers, pumps, free standing A/C units, refrigerators, roof top cooling units, and guest rooms A/C units, • Maintain inventory of parts and supplies of air conditioning and refrigeration equipment, • Design an effective preventive maintenance program to ensure maintenance of equipment is scheduled and carried out regularly as at when due, • Carry out chemical test on cooling tower and chilled water loop as required, • Ensure proper air circulation on the air handler by balancing airflow, • Assess vendor specifications and proposals and give recommendations to the customer; supervise material purchase following customer’s ordering procedures, • Perform low voltage wiring; handle BAS system Direct Digital Controllers (DDC), • Diagnose and effect mechanical, plumbing, and electrical repairs to HVAC equipment, • Carry out regular periodic plumbing and maintenance tasks as needed Required (Minimum Necessary) Qualifications · Education Requirements: High school education or GED equivalent · Level of Experience Requirements: 5-10 years of experience maintaining and repairing HVAC equipment. • Must be able to pass an extensive background check, • Must have a valid driver’s license and transportation, • Should own the basic tools needed to perform maintenance on the equipment, • Must be able to pass drug screening, • EPA 608 Certification for refrigerant (Type 1 and Type 2). Knowledge, Skills, Abilities, and Other Characteristics • Knowledge of multiple types of HVAC systems (Mini-splits, Rooftop Units, Chillers-Air Cooled, etc), • Good mechanical/electrical/plumbing skills as related to HVAC equipment., • Ability to lift and carry weights up to 75 lbs., • Ability to work with little supervision., • Ability to travel daily within the Designated area. Our company has locations in 3 states with multiple locations, • Knowledge of organizational procedures and workflows – understanding how work moves through a company., • Basic knowledge of relevant technologies or tools – e.g., Microsoft 365, communication platforms, or industry‑standard software., • Knowledge of customer service practices – principles of providing quality service and managing inquiries professionally., • Knowledge of data privacy and confidentiality principles – awareness of proper handling of sensitive information., • Communication skills (written and verbal) – ability to convey information clearly and professionally., • Time management and prioritization – balancing multiple tasks and meeting deadlines., • Problem‑solving and critical thinking – analyzing issues and selecting appropriate solutions., • Interpersonal and teamwork skills – building rapport and collaborating effectively with others., • Attention to detail – producing accurate, error‑free work. Preferred • 10-15 years of experience maintaining and repairing HVAC equipment., • Experience with maintaining multiple locations., • EPA 608 Certification for refrigerant (Universal).., • Controls Knowledge a plus. Supervisory Responsibilities · This position will not have supervisory responsibilities. DOT Covered/Safety-Sensitive Role Requirements · This position is not subject to federal requirements regarding Department of Transportation “safety-sensitive” functions. Necessary Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this role. Employees must always maintain a constant state of mental alertness. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Work Environment The work environmental characteristics described here are representative of those that must be borne by an employee to successfully perform the essential functions of the role. Employees must always maintain a constant state of situational awareness. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Technicians will report to the Project Manager daily for assignments unless scheduled for deployment to a job site. Additional Qualifying Factors As a condition of employment, you will be required to pass a pre-employment drug screening and have acceptable background check results. If applicable to the contract, you must also obtain and maintain the appropriate clearance levels required and must also be able to obtain access to military installations. Shareholder Preference BSNC gives hiring, promotion, training, and retention preference to BSNC shareholders, shareholder descendants and shareholder spouses who meet the minimum qualifications for the job. Bering Straits Native Corporation is an equal opportunity employer. All applicants will receive consideration for employment without regard to any status protected by state or federal law, or any other basis prohibited by law.

Job DescriptionDescription: • Perform preventive maintenance & service inspections on a variety of transport refrigeration units (TRU) & auxiliary power units (APU) & heater equipment, • Perform diagnostic, repair work on mobile refrigeration equipment, auxiliary power units & heater equipment, • Follow established technical & administrative processes, • Complete repair orders & parts usage forms, • Communicate effectively with supervisor, team members & customers, • Remain current on technical & regulation requirements, • Thermo King University Certi-Tech certification (to be completed within one year) and maintained, • EPA 608 & 609 certifications (to be completed within one year), • On Call duties rotation once skill level and training requirements have been metRequirements:, • Experience in the field of transport refrigeration equipment (Thermo King or Carrier Transicold preferred) a BIG Plus, • Skills to sufficiently install, diagnose and repair transport refrigeration, air conditioning and heating equipment, • Demonstrate technical knowledge of refrigeration systems, components, materials, methods & equipment to perform, prioritize and complete job assignments, • Own & maintain the proper hand tools to perform job functions, • High school diploma or equivalent, technical trade school a plus, • Proficient with computer operation/usage, • Valid driver’s license

Job Description Peterson Plumbing & Heating, Inc. is seeking an experienced HVAC Operations Manager to oversee and grow our HVAC service and installation division. This is a hands-on management position for an experienced HVAC professional who understands the technical side of the trade but, equally important, can organize people, manage jobs, communicate with customers, and keep the department running efficiently and profitably. The Person We're Looking For - The successful candidate should have substantial field experience and be capable of earning the respect of experienced HVAC technicians. • Highly knowledgeable in residential and light-commercial HVAC., • Strong in boilers and hydronic heating systems., • Experienced with forced-air heating and air-conditioning systems., • Comfortable with refrigeration, electrical troubleshooting, controls, pumps, zone valves, and related HVAC systems., • Capable of estimating and managing both service and installation work., • Highly organized and able to manage multiple jobs simultaneously., • Strong with customers and employees., • Comfortable holding technicians accountable for productivity and quality., • Able to make decisions without requiring constant direction from ownership., • Focused on completing jobs, getting paperwork closed out, and getting work billed., • Sales-minded without sacrificing customer trust or workmanship., • Interested in building and growing an HVAC department rather than simply maintaining one. What This Position Is Not - This is not a desk-only management position. We need an HVAC professional who can manage the department from the office but also understands what is happening in the mechanical room, on the rooftop, or at the customer's furnace or boiler. The right individual will combine technical HVAC expertise, leadership, organization, customer service, estimating ability, and business accountability. Peterson Plumbing & Heating is an established customer base and an existing HVAC operation. Our goal is to have someone who can take ownership of that division, support our technicians, generate additional residential and commercial HVAC opportunities, and help turn the department into an increasingly productive and profitable part of our company. Requirements Primary Responsibilities • Manage the day-to-day operations of the HVAC service and installation department., • Supervise, support, and hold HVAC technicians and installers accountable., • Coordinate service calls, installations, preventive maintenance, and ongoing projects with our office staff., • Provide technical support and troubleshooting assistance to field technicians when necessary., • Diagnose and assist with complex HVAC, boiler, hydronic, refrigeration, electrical, and control-system problems., • Perform jobsite visits and assist with difficult service situations when required., • Estimate HVAC repairs, replacements, and installation projects., • Develop scopes of work, equipment selections, labor requirements, and material lists., • Follow jobs from the initial customer call or estimate through scheduling, completion, billing, and closeout., • Ensure technicians submit complete and accurate paperwork, job notes, equipment information, photos, and invoices promptly., • Review completed work for accuracy and profitability., • Work closely with our office manager and ownership to maintain an efficient FieldEdge workflow., • Maintain strong communication with residential and commercial customers., • Handle customer concerns and escalated service issues professionally., • Manage and expand preventive-maintenance agreements., • Identify opportunities for additional HVAC service, replacement, and installation work., • Assist with recruiting, training, mentoring, and evaluating HVAC personnel., • Maintain high standards for workmanship, professionalism, vehicle organization, safety, and customer service., • Help ownership develop and execute strategies to grow HVAC revenue and profitability. Benefits Competitive Industry Annual Salary: $90,000 - $110,000 Depending on Experience What We Offer - • Competitive pay based on experience, • Steady, year-round work, • Supportive, family-oriented work environment, • Opportunities for continued training and growth, • Simple IRA with company match, • Paid holidays, paid vacation and paid sick time, • Company vehicle and tools (for qualified technicians), • Health benefits, • Straightforward management and realistic expectations Peterson Plumbing is an Equal Opportunity Employer and considers all applicants without regard to any protected characteristic under federal, New York State, or local law.

Job Description We're seeking talented candidates for full-time and part-time experienced Automotive Technician positions at Jiffy Lube Multicare. Jiffy Lube is America's leader in vehicle preventive maintenance services with over 2,000 locations. We are Stonebriar Auto Services, America's fastest-growing Jiffy Lube franchise and we're hiring now! The successful candidate will be responsible for diagnosing automotive issues and performing requested installation, repair, and maintenance services for guests' vehicles in a safe and efficient manner while providing an outstanding guest service experience and contributing to an energetic and fun working environment. A current and valid driver's license is required as is a NY state inspection license. ASE Certifications are strongly preferred. Tools will be provided. All team members will receive a competitive wage and a generous discount on Jiffy Lube services including Multicare services (tires, brakes, repairs) at company cost and NO CHARGE for labor. Full-time team members are eligible for paid-time-off, health, dental, and optical insurance, life and disability insurances. Due to our growth, great career advancement opportunities are available too! For immediate consideration, please complete our employment application. We look forward to hearing from you!

Job Description Overview WHY COOLSYS? At CoolSys, we offer more than just a job—we provide stability, growth, and industry-leading benefits for our employees. No wonder Newsweek named CoolSys one of America’s Greatest Workplaces! As a large company serving diverse customers, we invest in our team with: • Competitive Compensation: $26-$44/hr, depending on direct experience, • Sign on Bonus: Up to $5,000 depending on experience, • Ongoing Education & Training: Access to state-of-the-art facilities and paid online training., • Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting., • Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing., • Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more. Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities The Journeyman - Electrical is responsible for repairing, maintaining, and installing different kinds of electrical systems. Determines the layouts and testing of electrical patterns. ESSENTIAL DUTIES AND RESPONSIBILITIES · Read blueprints, run conduit, and wires devices. · Read and interpret mechanical and electrical drawings and code specifications for determining wiring layouts. · Performs upgrades or preventive maintenance to electrical control systems. · Runs tests, isolates problems, replaces damaged section of wiring, and layout circuit. · Embodies the CoolSys CARES culture (Collaboration, Accountability, Respect, Empowerment, Safety). · Performs other duties as assigned. Qualifications Education / Training · High school diploma or GED, equivalent work experience and trade or technical school classes. · License as a Journeyman or Electrician to meet state requirements. Work Experience / Skills · 3+ work experience as an Electrician Apprentice. · Knowledge of tools, equipment, and materials common to the electrical trade. · Knowledge of applicable electrical codes, standards, and regulations. · Knowledge of electrical application for high and low voltage electric system. · Skill in the installation, repair, and maintenance of all types of electrical system equipment and components. · Ability to work with minimal supervision. · Must be knowledgeable in all aspects of commercial construction industry related products and tools. · Skill in both verbal and written communication. · Good driving record. · Valid driver’s license. · Ability to understand and follow all company policies and procedures and all applicable State and Federal laws. · Ability to use typical business tools including E-Mail, Word, Excel, etc.

Job Description Build a Steady Career as a Warehouse Associate with Renewal by Andersen of CNY Looking for more than just a job? At Renewal by Andersen of Central New York, employees make a life, not just a living. Build a career with purpose. Join our team. Position Title: Warehouse Associate Shift: Weekdays 7:00am-3:30pm , Shifts may vary Position Overview: The Warehouse Associate position is responsible for performing various warehouse tasks to ensure the efficient and safe operation of the facility. This position plays a crucial role in prioritizing workload, maintaining inventory accuracy, organizing warehouse space, and ensuring a safe work environment. This position is expected to be a team player and work with all other departments at Renewal by Andersen of CNY to meet company goals and initiatives. Key Responsibilities: · Daily Warehouse Operations: Perform core logistics tasks including receiving, storing, picking, packing, shipping, and quality assurance of all products and materials. · Inventory & Quality Control: Inspect incoming shipments for defects or damages to ensure only high-quality items enter inventory. Accurately tag, label, and organize stock to optimize space, cleanliness, and security. · Order Fulfillment & Staging: Check, verify, and fill job orders per material lists. Specifically, stage and label window units for install teams to ensure timely access and prevent material loss. · Site Security & Supervision: Authorize and supervise warehouse entry for subcontractors, vendors, and delivery personnel. Verify identities, confirm the loading of approved materials per contracts, and ensure all visitors follow safety protocols. · Facility & Carpentry Support: Safely and proficiently operate a variety of power tools (including power saws, drills, sanders, and routers) to cut, shape, and install wood trim, molding, and complete other minor facility projects. · Safety & Maintenance: Strictly adhere to OSHA and company safety guidelines, including the mandatory use of Personal Protective Equipment (PPE). Perform preventive maintenance inspections on tools and equipment before and after use. Knowledge, Skills, and Abilities (KSA) Required: • Interpersonal, team building and follow-up skills., • Ability to work with and maintain effective working relationships with other departments in the company., • Effective communication skills (oral and written)., • Flexibility and demonstrated ability to adapt well in a changing environment., • Ability to contribute to a positive team culture and create a culturally inclusive environment., • Ability to be empathetic and build trusting team member and customer relationships., • Ability to actively listen and communicate effectively., • Ability to effectively problem solve in a fast-paced environment. Education and Experience Requirements: • 2 years or less of verifiable experience working in a warehouse environment, with demonstrated understanding of daily operations, safety procedures, inventory handling, and material movement., • Must pass and maintain a valid DOT medical examination/physical., • A clean and valid driver's license., • Competent in performing basic mathematical calculations., • Experience handling full life cycle flow of home improvement product installation/service highly preferred., • Ability to work in a fast-paced environment and meet established deadlines., • Available to work extended hours, especially during peak seasons., • Obtain and maintain PIT certification If you are a motivated individual with a keen eye for detail and a strong commitment to teamwork, we encourage you to apply for this rewarding position at Renewal by Andersen of CNY. Join us and be part of a dynamic team that values quality, efficiency, and safety. (By applying, you opt-in to receive text messages for recruiting purposes.) Equal Opportunity Employer Renewal by Andersen of CNY is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees, free from discrimination and harassment. All employment decisions are based on business needs, job requirements, and individual qualifications.

Job DescriptionDescription: ABOUT C SPEED C Speed, LLC is a radar Original Equipment Manufacturer (OEM) specializing in advanced radar systems, mechanical and electrical engineering, and software development for defense applications. We partner closely with our customers to design, deliver, and sustain mission-critical systems in dynamic operational environments. As our programs continue to grow, we are expanding our sustainment and depot operations capability to support long-term system readiness and lifecycle performance. POSITION OVERVIEW We are seeking a hands-on, detail-oriented Production & Inventory Associate to build and assemble our products and to support the daily administrative and operational functions of our warehouse. Reporting to the Warehouse or Operations Manager, the role divides its time between the assembly bench — building products, kits, and displays to specification and keeping warehouse equipment running — and the administrative work that connects floor operations, inventory systems, and the broader organization. The ideal candidate pairs mechanical aptitude and comfort with hand and power tools with strong record-keeping discipline, ensuring that finished assemblies, shipments, inventory data, and documentation remain accurate, timely, and compliant. KEY RESPONSIBILITIES • Assemble products, kits, and displays to specification, working from work instructions, assembly drawings, and bills of materials, and meeting daily build and quality targets., • Operate common hand and power tools (drills, drivers, wrenches, torque tools) safely and accurately during assembly, rework, and repair tasks., • Inspect finished assemblies for fit, function, and quality, correcting defects and escalating recurring issues., • Perform basic mechanical maintenance and troubleshooting on warehouse equipment (pallet jacks, conveyors, carts, packaging equipment), escalating major repairs to maintenance or vendors., • Document assembly output, parts consumption, and equipment maintenance activity, keeping records aligned with inventory and quality requirements., • Maintain accurate inventory records in the warehouse management system (WMS), reconciling physical counts with system data and investigating discrepancies., • Process inbound and outbound shipments, including generating packing slips, bills of lading, and shipping labels, and verifying order accuracy., • Coordinate with carriers, suppliers, and internal teams to schedule deliveries, pickups, and returns., • Prepare and file warehouse documentation such as receiving reports, inventory logs, and compliance records., • Generate routine reports on stock levels, order status, and operational metrics for the Operations Manager., • Support cycle counts and periodic physical inventory audits., • Monitor stock levels and flag reorder points to prevent shortages or overstock., • Assist in onboarding documentation and timekeeping for warehouse staff as needed., • Ensure adherence to health, safety, and inventory-control procedures across all administrative processes. Requirements: REQUIRED QUALIFICATIONS • 2+ years of hands-on assembly, production, or light manufacturing experience, including safe and accurate use of hand and power tools., • Mechanical aptitude with the ability to read work instructions, assembly drawings, and bills of materials, and to troubleshoot basic equipment issues., • 2–3 years of administrative or clerical experience in a warehouse, distribution, or logistics environment., • High school diploma or equivalent; associate degree in business, logistics, or a related field preferred., • Proficiency with warehouse management systems (WMS) and inventory software., • Strong computer skills, including Microsoft Excel, Word, and Outlook., • Demonstrated accuracy in data entry and record-keeping., • Solid organizational and time-management skills with the ability to prioritize in a fast-paced setting., • Effective written and verbal communication skills., • Familiarity with shipping documentation and basic inventory-control principles. PREFERRED QUALIFICATIONS • Experience with a specific WMS or ERP platform (e.g., SAP, Oracle, NetSuite)., • Forklift certification or willingness to obtain one., • Knowledge of OSHA warehouse safety standards., • Experience in a light manufacturing, kitting, or product-assembly environment., • Basic equipment-maintenance or mechanical-repair training (e.g., preventive maintenance, lockout/tagout). PHYSICAL REQUIREMENTS & WORK ENVIRONMENT • Primarily an on-site role based in the warehouse and adjoining office area., • Ability to stand at an assembly bench for extended periods, sit for administrative work, and move throughout the warehouse floor., • Regular lifting, carrying, and positioning of up to 50 lbs (e.g., components, cartons, subassemblies, and supplies), with assistance or equipment for heavier items., • Frequent use of hands for assembly tasks, including gripping, repetitive motion, and fine manipulation of small parts and tools., • Exposure to typical warehouse conditions, including variable temperatures and moderate noise., • Standard schedule is Monday–Friday, 8:00 a.m.–5:00 p.m., with occasional overtime during peak periods. COMPENSATION & BENEFITS • Hourly Rate: $23-$25 per hour, commensurate with experience., • Benefits: Health, dental, and vision insurance / Paid time off (PTO) / Retirement plan package READY TO JOIN THE MISSION? C Speed, LLC is always looking for talented professionals who want to do meaningful work with a team that treats every challenge like a mission. For more information about C Speed, LLC and additional job opportunities, please visit our website: www.cspeed.com C Speed, LLC provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Position Summary The Manufacturing Engineering Technician provides hands-on technical support to the production floor, helping maintain equipment uptime, resolve equipment and product quality issues, support process improvements, and assist with the introduction and implementation of new equipment and tooling. This role works closely with Engineering Manager, Production, Quality, Maintenance, and other cross-functional teams to troubleshoot problems, implement short- and long-term solutions, support production startups, and continuously improve manufacturing processes, equipment, and work methods. Principal Accountabilities • Provide timely, hands-on technical support to maintain production equipment uptime and minimize disruptions to manufacturing operations., • Troubleshoot equipment, tooling, process, and product quality issues on the production floor and recommend appropriate corrective actions., • Assess quality issues and provide input regarding non-conforming material disposition, including rework, sorting, or use-as-is decisions in accordance with established procedures., • Develop and implement short-term solutions to minimize equipment downtime while documenting issues, root causes, and corrective actions., • Assist Manufacturing Engineering and cross-functional teams in identifying and implementing long-term solutions to recurring equipment and process problems., • Provide input into preventive maintenance programs, including recommended maintenance tasks, procedures, and frequencies., • Assist with the design, development, modification, and implementation of manufacturing equipment and tooling., • Participate in equipment run-offs, installation activities, first-piece approvals, production startup trials, and equipment/process validation activities., • Support the design and improvement of manufacturing processes, work methods, and production workflows., • Assist with the development and implementation of operator training programs, standard work instructions, and other manufacturing documentation., • Perform equipment changeovers and support production personnel in ensuring equipment is properly configured for scheduled production., • Participate in engineering projects and monthly project status meetings; provide updates regarding project progress, technical challenges, and activities affecting schedule completion., • Identify opportunities for continuous improvement in equipment reliability, production efficiency, quality, safety, and cost., • Actively participate in process improvement and problem-solving initiatives within the scope of the position., • Work effectively as a collaborative member of the Manufacturing Engineering team and cross-functional production organization., • Troubleshoot mechanical, electrical, and PLC-related equipment, tooling, process, and product quality issues on the production floor and recommend appropriate corrective actions., • Maintain a clean, organized, and safe work environment and actively support 5S standards and audit activities., • Follow all company policies, procedures, safety requirements, and applicable work instructions., • Support company objectives and operational goals within the scope of the position., • Perform additional duties and responsibilities as assigned. Key Competencies • Strong mechanical and technical troubleshooting skills., • Ability to diagnose equipment and process problems in a fast-paced manufacturing environment., • Practical, hands-on approach to problem solving., • Ability to read and interpret technical drawings, specifications, and equipment documentation., • Strong communication and teamwork skills., • Ability to prioritize multiple production and engineering issues effectively., • Attention to detail and commitment to quality and safety., • Ability to document technical issues, corrective actions, and process changes accurately., • Commitment to continuous improvement, 5S, and lean manufacturing principles.

Job Description Are you an aspiring Diesel Mechanic? Start your career with A. Duie Pyle! As a Diesel Technician Apprentice, you will participate in a training program designed to build the skills and knowledge needed for a successful career in diesel maintenance. Working alongside experience technicians. you will receive structured training, personalized mentorship, and hands-one experience service Pyle's fleet. Upon successful completion of the program, you will advance to a Diesel Technician role, performing preventive maintenance and repairs on our trucks and trailers. Why Pyle? • Pay Rate: $24.00 per hour, • Shift differential when working 2nd & 3rd shifts, • Weekly pay, via direct deposit, • Tuition Reimbursement, • Company-funded Tool Reimbursement Program, • Modern, well-maintained shops with new equipment, • Paid vacation, PTO, and annual holidays, • Medical, Dental, Vision and Life Insurance, • 401(k) with Company Match; Annual Profit Sharing (100% employer paid), • Short Term and Long Term Disability, • Wellness Programs for yearly benefits discount Simply put, Pyle People Deliver. Since 1924, A. Duie Pyle has been family-owned and operated. Built by our core values of integrity, service first, and empathy, we’re dedicated to exceptional customer service and empowering our employee’s success. If you’re ready to build a career with a company that continues to lead the supply chain and logistics industries, we’d love to hear from you. The responsibilities of the position include, but are not limited to: • Performing routine preventative maintenance and general repairs on Class 8 trucks, • Troubleshooting and repairing brakes, air systems, electrical components, suspension systems, etc., • Diagnosing and performing necessary repairs to the engine, electrical, and exhaust after-treatment systems, • Inspecting and replacing general components as required To be qualified for this position, you must possess the following: • A recent graduate or active student currently enrolled in a post-secondary program of study in Diesel Technology and or are a recent graduate, • Your own a set of basic tools, • Willingness to learn and grow your abilities, • Ability to work all three shifts, as needed Want a look under the hood? Click here to see what a typical day as a Pyle Technician looks like: https://vimeo.com/511212424 For a full job description associated with this posting, please contact A. Duie Pyle’s Human Resources department. This job posting is intended solely for external advertising purposes and does not represent a comprehensive list of all job-related duties and qualifications. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Job DescriptionArmstrong has an opening for a second shift CNC Machinist 1. Armstrong Rapid Manufacturing has been in business for over 50 years in the East Syracuse NY area. Armstrong specializes in both prototyped and low volume production machined castings. Armstrong has a benefit package that includes paid holidays, bonus and referral programs, paid vacation, 401K, 100% company paid life insurance, sick time, supplemental short term disability insurance, dental, medical, vision, accident, cancer and critical care insurance plus safety awards. We also provide free coffee daily for our employees available at multiple coffee kiosks. Our website is www.armstrongrm.com and it shows many of the exciting aspects of our company! Take a look!The Salary Range for our CNC Machinist 1 job is $27.00-$36.00 per hour plus an additional 10% 2nd shift premium when going onto 2nd shift with the job description below: Summary/Objective: Responsible for producing precision-machined components by setting up and operating horizontal or vertical CNC (Computer Numerical Control) machining centers. Ensures strict adherence to quality, documentation, and safety standards. Must possess the ability to optimize machining processes for enhanced efficiency and precision.Job ResponsibilitiesInterpret blueprints and work instructions to set up and operate 3 & 4-axis CNC mills with the correct fixturing, tooling and parameters to produce compliant precision machined parts.Verify machined part accuracy through precision measuring tools and equipment using the documented quality plan.Troubleshoot machining issues and make real-time adjustments to improve performance and accuracy.Train and mentor junior machinists, sharing knowledge and best practices.Maintain detailed production records and comply with quality assurance and safety protocols.Perform routine maintenance and troubleshooting on machines to prevent downtime.Maintains equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs.Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs.Adheres to all safety policies and procedures, consistently uses personal protective equipment and practices good housekeepingMaintains regular on time attendance and adheres to company policies, procedures, and standards of conduct. Performs other tasks as directed. Educational, Experience Based, and Skill QualificationsMinimum of 7 years CNC machining experience in set-up, operation, and optimizing CNC vertical and horizontal machine centersStrong understanding of CNC machining and programming principlesAbility to edit and or write basic machining macrosAbility to quickly identify and troubleshoot machining problems during the approval or production processAbility to read and interpret blueprints with a solid understanding of Geometric Dimensioning and Tolerancing (GD&T)Strong attention to detail.High school diploma or equivalentPhysical RequirementsAbility to walk, remain on feet for extended time periods, reach, stoop. Kneel and lift up to an including 35 pounds as needed.AAP/EEO Statement Armstrong Mold Corporation is committed to equal opportunity, to providing a work environment that is free from unlawful discrimination and will not discriminate with regard to race, religion, color, national origin, sex, age, veteran status, disability, genetic information, or any other protected status. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, age, veteran status, disability, genetic information, or any other protected status. Armstrong Mold Corporation is proud to be an Equal Opportunity Employer (EOE). Armstrong Mold Corporation will make reasonable accommodation(s) for qualified applicants with disabilities and employees If you are interested in applying for employment and feel you need a reasonable accommodation to apply for a posted position, or are an employee with a question contact Human Resources at 315-437-1517 or by email to hr@armstrongrm.com. unless an employee reasonable accommodation would result in undue hardship.#ZR Job Posted by ApplicantPro

Job Description Heavy-Duty Truck Powertrain & PM Specialist Is this you? • You prefer variety over repetition and enjoy solving new mechanical puzzles each shift., • You’re confident working across engines, transmissions, and brake systems using diagnostic tools., • You want steady hours, overtime potential, and the stability of an established local beverage distributor. What you’ll work on, • Maintain and repair a fleet of about 50 trucks—mixing scheduled PMs with on-demand repairs., • Use diagnostic equipment to pinpoint issues quickly and accurately., • Keep equipment safe, reliable, and ready for daily routes. Must-haves, • Experience with diesel trucks, automotive, heavy equipment/yellow iron, or farm equipment., • Personal set of tools suitable for fleet maintenance., • Valid New York State driver’s license; able to operate company vehicles (CDL A not required)., • Ability to pass drug testing, (including THC) Schedule & pay • 2nd Shift: Approximately 2:00pm–10:00/10:30pm, +$3/hr differential, • 3rd Shift: Approximately 9:30pm–6:00am, +$4/hr differential, • Guaranteed 40 hours weekly; OT available as needed; weekends typically off., • $24–$30/hr base (DOE) + shift differential + overtime opportunities. Benefits, • Health, dental, vision, • 401(k), • Life and disability insurance, • Paid vacation and PTO, • $150 annual boot allowance, • Training and development opportunities Preferred strengths, • Diesel Engine Systems, • Preventive Maintenance & Inspection, • Diesel & Heavy Equipment Systems Next steps Send your updated resume to be considered. We appreciate your interest—only qualified applicants will be contacted.

Job DescriptionDirect Hire Machine Shop ManagerPay: $70,000-$90,000 annually Hours: 6 a.m.- to be determined Staffworks is seeking a reliable Machine Shop Manager to join their award-winning team! What's in it for you? Direct Hire Opportunity Great Salary Machine Shop Manager Details: • Plans and directs production to obtain maximum utilization of assigned employees and materials and to ensure on time shipment of parts meeting customer’s specifications, • Coordinates supply of raw materials, and perishable tools, • Revising working practices and observes employees to ensure compliance with standards, • Inspects equipment to ensure specific operational performance, • Coordinates repairs and preventive maintenance with Maintenance personnel to ensure minimum downtime., • Informs General Manager of employee problems that require his/her attention and the disposition of resolved minor problems, • Provides hands on departmental instruction and training, • Follows company’s performance appraisal policy and recommends merit increases, promotions, transfers and other personnel actions for assigned personnel.Machine Shop Manager Requirements, • High school graduate or equivalent., • A.S. in Mechanical technology or B.S. degree in engineering with a focus on particular process, • Supervisory experience in a manufacturing company specializing in CNC machining, • Technical experience in CNC machining/programming preferred., • Strong oral and written communication skills, • Computer literacy including Word, Excel, email, and Outlook., • Familiarity with an ERP system such as Syteline or SAP etc., • Five (5) years of production management experience, • Ability to lift up to 35 pounds as neededWe are an Equal Opportunity Employer and celebrate diversity at all levels of our organization.How to Apply: www.staffworkscny.com (315)455-9675 "INDITES"

Job DescriptionLaboratory Technician Why Byrne At Byrne, we foster a culture built on teamwork, excellence, and professionalism. Our greatest strength lies in the exceptional talent and dedication of our team members across every part of the organization. We value their contributions and ensure they’re recognized, rewarded, and compensated in ways that reflect their impact and expertise. Pay and Benefits • Salary Range – $25.00 - $37.00 per hour, • Competitive bonus programs, • Medical, Dental, Vision benefits available day 1 of employment, • Supplemental benefits available on day 30 of employment, • Eligible for 401 (k) with a company match available on day 90 of employment, • Educational Support via tuition reimbursement and scholarship program Work Shift and Location 6750 Benedict Road W East Syracuse, NY 13057 Back Half Nights - 6pm-630am Job Overview The Laboratory Technician plays a key role in executing assigned quality tasks. This includes setting up, operating, cleaning, and troubleshooting production equipment in accordance with standard operating procedures. Key Responsibilities • Perform microbiological testing on raw milk, finished dairy products, and processing equipment to detect harmful bacteria such as Salmonella, E. coli, and Listeria while conducting plate counts, pathogen screening, and shelf-life studies to ensure products meet safety standards and regulatory requirements., • Conduct chemical and physical analyses including fat content, protein levels, moisture content, pH measurements, and acidity testing using laboratory instruments such as spectrophotometers, titrators, and analytical balances to verify product specifications and nutritional labeling accuracy., • Collect samples from various production stages including incoming raw materials, in-process products, and finished goods following proper sampling protocols and chain of custody procedures while maintaining sample integrity and traceability throughout the testing process., • Operate and maintain laboratory equipment such as incubators, autoclaves, microscopes, and chromatography systems while performing routine calibrations, quality control checks, and preventive maintenance to ensure accurate and reliable test results., • Document all test results, observations, and non-conformances in laboratory information management systems (LIMS) and prepare detailed reports for quality assurance teams, regulatory agencies, and production management while maintaining compliance with FDA and USDA documentation requirements., • Investigate product quality issues and customer complaints by conducting root cause analysis, performing additional testing protocols, and collaborating with production teams to identify corrective actions while ensuring all testing procedures follow established standard operating procedures and Good Laboratory Practices. Min. Qualifications • Minimum of GED or High School Diploma is required., • Associates degree in dairy/food sciences or equivalent highly preferred, • 1-2 years’ experience in similar food industry lab setting highly preferred. Byrne Headquartered in LaFayette, Byrne is a Central New York-based dairy company with a legacy spanning over 90 years. Its operations include an extended shelf-life (ESL) and ultra-high temperature (UHT) pasteurization plant in DeWitt, as well as an ESL manufacturing facility in Cortlandville. Byrne also maintains warehouse facilities in Syracuse and East Syracuse, along with a dedicated ice cream center in Syracuse. As a recognized industry leader, Byrne continues to drive innovation at the forefront of dairy processing and product development

Job Description Director of Maintenance Van Duyn Center for Rehabilitation and Nursing Syracuse, New York At Van Duyn Center for Rehabilitation and Nursing, we are seeking a dedicated and experienced Director of Maintenance to lead our in-house maintenance department and oversee all building operations, maintenance, life-safety systems, grounds, and physical plant functions for our large 513-bed long-term care facility. If you have a strong working knowledge of commercial mechanical systems and the ability to effectively lead an in-house maintenance team while maintaining a safe, reliable, and survey-ready healthcare environment, we encourage you to apply! Key Responsibilities: Direct and oversee the day-to-day operation of the facility's physical plant and Maintenance Department Supervise, schedule, train, and manage maintenance personnel and grounds staff Work effectively with employees in a union environment Maintain the facility's large steam boilers, including routine operation, preventive maintenance, troubleshooting, water treatment coordination, and required inspections Oversee operation and maintenance of the facility's chiller plant and cooling tower, including pumps, controls, treatment systems, and associated HVAC equipment Maintain and troubleshoot pneumatic building control systems, including thermostats, control valves, actuators, air compressors, air lines, and related components Oversee HVAC systems throughout the seven-story building, including air-handling units, exhaust systems, pumps, motors, fan-coil units, heating systems, and associated equipment Maintain and oversee the preventive maintenance program for mechanical, electrical, plumbing, HVAC, life-safety, building systems, and emergency generators Respond to equipment failures and emergencies and provide technical direction to ensure critical building systems remain operational Additional Responsibilities: Oversee snow removal and landscaping operations, including managing and coordinating snow and ice removal, supervising lawn care, landscaping, trimming, seasonal cleanup, exterior maintenance, and grounds appearance Maintain a clean and organized boiler room, mechanical spaces, shops, roofs, utility areas, and grounds Communicate effectively with facility Administration, department heads, staff, contractors, and corporate leadership Respond promptly to maintenance emergencies and facility concerns Qualifications: Minimum 5 years of building maintenance and/or management experience, preferably in a large healthcare, hospital, skilled nursing, senior living, educational, hotel, industrial, institutional, or similar commercial building Previous supervisory or management experience High school diploma or equivalent Valid NYS Driver's License Strong working knowledge of steam boiler systems, commercial chillers and cooling towers, pneumatic HVAC controls, and commercial HVAC, plumbing, electrical, mechanical systems Experience supervising maintenance personnel and managing preventive maintenance programs Strong understanding of healthcare facility code and regulatory compliance Benefits: Competitive wages based on experience Generous PTO Paid sick, holiday, and personal time Health insurance with company contribution Dental and vision insurance Company 401(k) contribution Supportive work environment Opportunity to lead an important department in a healthcare setting If you are a motivated and experienced maintenance professional looking for a new challenge, apply today to join our team! #upstate123

Job DescriptionJob Description The work involves responsibility for assigning, supervising and inspecting work performed in the maintenance and repair of a variety of gasoline, diesel and hybrid (gas and electric) powered motor equipment, inclusive of heavy equipment with a vehicle weight of at least 12,000 pounds. Under general supervision of an administrative supervisor, an employee in this class is responsible for all diesel, gasoline and hybrid (gas and electric) powered motor equipment maintenance and repair work and for maintaining an inventory of all the parts and equipment used in the repair work, including preparing requisition requests or may coordinate parts procurement and inventory with inventory control staff. The employee exercises independent judgment in preparing work schedules, prioritizing staff assignments and maintaining an inventory of supplies and equipment sufficient to ensure the safe and efficient operation of the motor equipment. General supervision is exercised over a number of employees, including a first line supervisor. The employee's work is checked through occasional inspections by administrative supervisors. Does related work as required. Typical Work Activities Directs and supervises assigned staff in the safe and efficient maintenance and repair of gasoline, diesel and hybrid (gas and electric) powered motor equipment, inclusive of vehicles weighing at least 12,000 pounds. Develops, schedules, and manages a preventive maintenance program designed to maintain vehicles and equipment in safe operating condition. Manages equipment maintenance for both on and off-road vehicles and equipment; establishes replacement schedule for fleet and equipment; oversees warranty work. Make recommendations to administrative supervisor on needed equipment and vehicle repairs; researches relevant facts and cost information. Prepares equipment and small tool budgets. Writes and reviews specifications for equipment purchased. Selects and requisitions essential supply of parts and materials; reviews and signs requisitions and repair orders. Evaluates products and work performed by vendors and approves payment to vendors. Maintains written records and prepares reports of work performed, labor and materials used, gains, losses, etc. May participate in the review of vehicle accidents; reports observations and makes recommendations. Knowledge, Skills, and Abilities Thorough knowledge of the principles, methods, materials and tools of the motor equipment repair trade. Thorough knowledge of the maintenance, repair and operation of gasoline, diesel and hybrid powered motor equipment, inclusive of heavy equipment with a vehicle weight of at least 12,000 pounds. Good knowledge of federal and state vehicle regulations. Ability to write and interpret technical specifications relating to the purchase of new equipment. Ability to supervise subordinate staff. Ability to understand and carry out complex oral and written instructions. Ability to prepare written reports and to maintain written records. Ability to prepare requisition and budget requests. Physical condition commensurate with the demands of the position Minimum Qualifications Promotional: Two (2) years of permanent competitive class status as a Heavy Equipment Mechanic Crew Leader. Open Competitive: Seven (7) years of work experience, or its part-time equivalent, in the maintenance and repair of gasoline and diesel-powered motor equipment, inclusive of heavy equipment with a vehicle weight of at least 12,000 pounds, four (4) years of which must have been in an administrative or supervisory capacity. Note: Graduation from a regionally accredited college or university or one accredited by the New York State Board of Regents to grant degrees with an Associate's degree in automotive technology may be substituted for two (2) years of the non-administrative or supervisory work experience; or successful completion of a two (2) year vocational education program majoring in Automotive Technology or Automotive Mechanics may be substituted for one (1) year of the non-administrative or supervisory work experience. Special Necessary Requirement When required to operate motor vehicles, employees must possess a valid non-CDL or CDL with appropriate endorsements as required by the New York State Department of Motor Vehicles for the class of vehicle(s) being operated Benefits • Dental insurance, • Health insurance, • Paid time off, • Parental leave, • Vision insurance, • Retirement plan The Affirmative Action Policy of the City of Syracuse is to provide equal employment opportunity for all individuals regardless of race, color, sex, religion, creed, age (18 and over), marital status, national origin, disability, veteran status, gender identity or gender expression, sexual or affectional preference or orientation, or any other classified group within the protected class. The City also complies with 31 CFR part 51. If you have a disability for which you wish special accommodation to be made, contact the Office of Human Resources at 315-448-8780 or personnel@syr.gov. All offers of employment will be contingent on the successful completion of a background check and/or drug screen. Job Posted by ApplicantPro

Job Description Senior Manager, Manufacturing, Test & Service Engineering At Hidden Level, we’re building the future of airspace awareness through cutting-edge RF sensing technology. Our mission is to make the world safer—whether it’s protecting troops, securing infrastructure, or enabling smarter cities. We design, manufacture, and deploy advanced sensor systems that deliver real-time insights for defense and commercial applications. Position Overview: The Senior Manager, Manufacturing, Test & Service Engineering leads the engineering functions that support production, test, installation, service, and repair of Hidden Level products. This leader is accountable for the performance, capability, and continuous improvement of these functions, including ensuring the processes, tools, documentation, and technical resources required to scale effectively are in place and operating effectively. This role is accountable for the technical transition of products from development into repeatable production and for sustaining those products throughout their operational lifecycle. The Senior Manager drives manufacturing and test readiness, quality, throughput, troubleshooting, serviceability, and lifecycle support while providing both leadership and hands-on technical contribution as needed. Success requires the ability to coach teams, build scalable processes, solve complex technical problems, develop procedures and tooling, and support deployments. The Senior Manager is accountable for outcomes regardless of whether work is performed directly, delegated, or delivered cross functionally, and must retain the technical capability, judgment, and willingness to engage directly when it improves outcomes or strengthens team capability. Location: This position is located onsite in East Syracuse, NY Responsibilities: Manufacturing Engineering • Lead the Manufacturing Engineering function supporting Hidden Level hardware products from new product introduction through full-rate production., • Own manufacturing readiness and production engineering activities associated with new products, product revisions, and engineering changes., • Ensure effective development, maintenance, and continuous improvement of manufacturing processes, routings, work instructions, assembly methods, tooling, fixtures, and production test processes. Partner with Development Engineering Teams to support designed for manufacturability, assembly, testability, and serviceability., • Participate in Design for Manufacturing, Assembly, Test, and Service (DFM/DFA/DFT/DFS) reviews., • Establish manufacturing readiness criteria and ensure required documentation, tooling, equipment, software, training, and test capability are available prior to production release., • Support configuration management and Engineering Change Order implementation to ensure changes are introduced into production in a controlled manner., • Analyze production constraints, defects, test failures, and process variation and implement sustainable corrective actions., • Support capacity and production planning through analysis of labor content, equipment capacity, test capacity, takt time, cycle time, and process constraints., • Partner with Supply Chain and suppliers on manufacturing issues involving PCBAs, mechanical assemblies, components, and other critical hardware. Production Test & Tooling • Working with development engineering, own the manufacturing readiness and lifecycle management of manufacturing tooling, fixtures, test equipment, and associated technical documentation., • Develop and improve production test strategies that efficiently verify product performance while maintaining appropriate quality controls., • Ensure test stations, fixtures, and tooling are scalable, maintainable, calibrated where required, and appropriately controlled., • Identify opportunities to automate manufacturing and test processes where automation improves quality, repeatability, throughput, or traceability., • Establish standard methods for troubleshooting production failures and capturing failure information., • Work with Engineering teams to improve diagnostic capability and reduce time required to isolate manufacturing defects. Service & Depot Engineering • Establish and lead the technical processes supporting depot repair, field returns, troubleshooting, refurbishment, and product service activities., • Establish and maintain a structured service and depot triage process, including unit inspection, power on evaluation, diagnostic execution, configuration verification, and functional testing to efficiently identify and resolve known failure modes., • Establish tiered troubleshooting and escalation processes for units that cannot be resolved through initial triage., • Ensure troubleshooting guides, diagnostic procedures, repair instructions, test procedures, and service documentation are developed and maintained to enable consistent diagnosis and resolution of known issues., • Establish repair and disposition criteria for known failure modes, including repair, rework, return-to-vendor, and escalation to development engineering for evaluation, and other appropriate dispositions., • Establish standardized failure codes, repair codes, and service data collection practices to ensure recurring failure modes are identified and communicated effectively., • Drive improvements in diagnostic coverage and serviceability by translating recurring failure modes and service data into actionable feedback for Quality, Product and Engineering teams., • Own the field validation, documentation, and lifecycle management of specialized deployment/installation tools, fixtures, test equipment, and installation aids., • Define standardized deployment/installation tool kits/BOMs, including required quantities, calibration requirements, spares, consumables, packaging, and replenishment requirements., • Develop and control installation procedures, assembly instructions, torque requirements, cable/connector practices, sensor alignment methods, mounting methods, and other engineering-controlled installation requirements., • Develop and maintain configuration-controlled installation, commissioning, troubleshooting, acceptance test, tooling, and training documentation necessary to enable Hidden Level personnel and authorized third-party installers to safely and consistently deploy Hidden Level products., • Establish installer qualification requirements, technical boundaries, required installation evidence, and escalation criteria to ensure third-party installations meet Hidden Level engineering and quality standards., • Provide engineering escalation when the deployment/installation team encounters hardware, integration, installation, test, or configuration problems that cannot be resolved through standard procedures., • With Technical Support, define how as-deployed hardware configuration, serial numbers, firmware/software versions, modifications, and other configuration attributes are captured and maintained., • Support root cause investigations for significant or recurring field failures. Quality & Continuous Improvement • Partner with Quality to investigate manufacturing and field failures using structured root cause and corrective action methodologies., • Support Nonconformance, Material Review Board, Corrective Action, and Preventive Action processes as required., • Analyze manufacturing and service data to identify recurring failure modes, systemic issues, and improvement opportunities., • Drive Lean and continuous improvement initiatives across manufacturing and service engineering., • Establish standardized work and engineering controls that reduce process variation and improve repeatability., • Support Hidden Level’s ISO 9001 Quality Management System and applicable configuration, documentation, and process-control requirements., • Ensure manufacturing and service engineering processes generate appropriate objective evidence and traceability. Systems, Data & Metrics • Ensure manufacturing and service processes are appropriately represented within Hidden Level's enterprise systems and production workflows., • Partner with Operations, Supply Chain, Quality, Configuration Management, and IT on integration of engineering processes with Deltek Costpoint MRP, shop-floor execution, PLM, and related systems., • Develop dashboards and metrics that provide visibility into manufacturing and service performance., • Use operational data to prioritize engineering resources and continuous improvement activities. Leadership Responsibilities • Build, develop, and lead a high-performing Manufacturing & Service Engineering organization., • Establish clear roles, responsibilities, priorities, and technical ownership across the team., • Develop engineering standards and repeatable processes that enable Hidden Level to scale without creating unnecessary operational complexity., • Balance production support, service support, new product introduction, and longer-term process improvement priorities., • Develop staffing, tooling, equipment, and capital requirements necessary to support production and service growth., • Coach engineers and technicians in structured problem solving, root cause analysis, manufacturing engineering, and troubleshooting methodologies., • Establish strong working relationships across Operations, Engineering, Quality, Supply Chain, Configuration Management, Programs, Deployment, and Customer Service., • Serve as an escalation point for significant manufacturing and service-related technical issues. Required Qualifications: • Bachelor's degree in mechanical engineering, Electrical Engineering, Manufacturing Engineering, Industrial Engineering, Systems Engineering, or a related technical discipline., • 7+ years of experience in manufacturing engineering, hardware engineering, production engineering, service engineering, or related technical operations., • 7+ years of experience leading engineers in a manufacturing environment, • Demonstrated experience supporting the transition of complex hardware products from engineering development into production., • Experience developing manufacturing processes, work instructions, tooling, fixtures, and production test methods., • Strong troubleshooting and root cause analysis experience involving complex electromechanical or electronic systems., • Experience supporting engineering changes and configuration-controlled hardware., • Demonstrated ability to use manufacturing and service data to identify problems and drive measurable improvements., • Strong cross-functional leadership and communication skills., • Ability to operate effectively in a fast-growing environment where production systems and organizational capabilities are being developed concurrently., • Experience with radar, RF, aerospace, defense, telecommunications, or other complex electronic hardware. Preferred Qualifications: • Master's degree in systems engineering, • Experience with printed circuit board assemblies and electronics manufacturing., • Experience supporting depot repair, RMA, field service, or product lifecycle support operations., • Experience with ERP/MRP and product lifecycle management systems; Deltek Costpoint experience is beneficial., • Experience with Lean Manufacturing, Six Sigma, or structured continuous improvement methodologies., • Experience working within an ISO 9001-certified Quality Management System., • Familiarity with DoD manufacturing environments and applicable FAR/DFARS requirements., • Experience developing automated test systems, diagnostic tools, or manufacturing software., • Experience scaling manufacturing operations from low-rate production toward significantly higher production volumes. Compensation and Benefits: Hidden Level offers a competitive salary and a comprehensive benefits package, including health insurance, paid parental leave, flexible time off, 401(k) with employer contributions, life insurance, disability insurance, and potential stock options. Salary Range: The salary range for this position is estimated at $134,000 to $175,000 annually. Please note that the salary information is a general guideline only. Hidden Level considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Equal Opportunity Employer: Hidden Level is an Equal Opportunity Employer. We consider all qualified applicants for employment without regard to race, color, religion, national origin, sex, pregnancy, sexual orientation, gender identity, age, veteran status, disability, or any other status protected by applicable federal, state, or local law. Security Note: Due to the nature of Hidden Level’s technology, only U.S. citizens can be considered for this position. Hidden Level Employees must be able to obtain and maintain a U.S. Government Security Clearance, if required for the position. Please click here to review the National Security Clearance Adjudicative Guidelines.

Job DescriptionMobility Fleet Mechanic (Bikes & Scooters) Location: Syracuse, NY(On-site) Pay Rate: $23.00/hour Schedule: Full-Time (30–40 hours/week) Shift: 1st Shift (7:00 AM – 4:00 PM, flexible) Job Overview We are seeking Mobility Fleet Mechanics to support high-volume fleet maintenance operations for bikes and scooters. This role is critical to ensuring fleet reliability, vehicle uptime, and operational efficiency across service locations. This is a hands-on mechanical role ideal for candidates experienced in bicycle repair, scooter maintenance, and light electric vehicle servicing. You’ll work in a fast-paced, field-based environment focused on preventive maintenance, diagnostics, and repair execution. Key Responsibilities • Perform routine inspections, diagnostics, maintenance, and repairs on bikes and scooters, • Ensure fleet readiness, safety compliance, and uptime optimization, • Execute preventive maintenance programs and standard repair workflows, • Troubleshoot mechanical and basic electrical issues (e-scooters, mobility devices), • Document work orders, maintenance logs, and asset tracking data, • Collaborate with operations teams to meet service level agreements (SLAs), • Maintain tools, parts inventory, and a clean, organized workspace, • Support process improvement initiatives for maintenance efficiency Required Qualifications • High School Diploma or GED, • 1+ year of experience as a bicycle mechanic, scooter technician, or fleet maintenance technician, • Strong knowledge of mechanical systems, repairs, and maintenance procedures, • Ability to perform diagnostics and troubleshooting on mobility equipment, • Comfortable working in a warehouse or field-based environment, • Ability to lift up to 50 lbs, stand for extended periods, and perform physical tasks, • Ability to ride a bike/scooter and operate small fleet vehicles (e.g., golf carts), • Strong communication skills (verbal and written), • Flexible availability (including evenings and weekends as needed) Preferred Qualifications • Experience with e-bikes, e-scooters, or light electric vehicles (LEV), • Familiarity with fleet management systems, CMMS, or maintenance tracking tools, • Experience in rideshare, micromobility, logistics, or transportation operations, • Basic understanding of battery systems and electrical components Call (901) 742 8779 - Julia or Apply for fast start #LI-DNI Powered by JazzHR FKmCGOMGY6

Job Description CenTrio is seeking a qualified Instrumentation & Controls Technician to join our team in Syracuse, NY! Location- Syracuse, NY Full-Time Permanent Onsite Compensation: $60,000–$80,000 annually, depending on qualifications and experience. Job Summary Under the direction of the Electrical and Controls Manager, this position will be responsible for installing, calibrating, repairing, and maintaining Customer steam and chilled water metering stations as well as instrumentation and control systems in the boiler houses and chilled water plant. Diagnose and troubleshoot issues with measuring, recording and control devices in a timely manner. Coordinate and communicate with plant operators and customers when servicing or calibrating metering and control equipment. Must also be able to program, troubleshoot, and maintain loop controllers, PLCs, and other types of logic controllers. The successful candidate will be a self-starter that enjoys working in a fast-paced environment, strong commitment to deadlines and team, is process oriented with a high sense of ownership in their work, possesses a high degree of intellectual curiosity, and has a superior controls and instrumentation foundation. Core Responsibilities • Install, calibrate, troubleshoot, and program field control devices including control valves, pneumatic damper drives, motor control circuits, VFDs, PLCs, and process control systems, • Develop calibration procedures and perform calibrations of process measurement and control system nodes., • Maintain and expand new control loops including associated panels., • Commission and integrate new systems within the facility., • Work with a preventive maintenance program., • Support and maintain established system standards and documentation for process control loops and analytical equipment., • Maintain calibration records and documentation, • Read complex schematics, wiring diagrams and shop drawings for the purpose of installation, troubleshooting, and repairing of major systems and minor subsystems and components, • Utilizes a wide range of test equipment, including recorders, computers, PC based software analyzer programs, oscilloscopes, data analyzers, analog and digital multi-meters, and other test equipment, while performing tests to identify problems and to maintain and calibrate equipment to performance standards, • Connects, disconnects, and tags out equipment and circuits for test or repair and safety of personnel and equipment, • Performs soldering on electronic components., • Maintains shop and storage areas in a neat and orderly fashion., • Maintains the safe and efficient use of materials, tools, test equipment and personal safety and all others working in the vicinity., • Cleans work area after work is complete., • Complies with plant policy and procedures, particularly those involving personnel and equipment safety., • Maintains and repairs network communications systems (i.e., fiber networks, Ethernet networks and network peripherals), • Maintains and repairs complete process systems and repair/replace subcomponents as required., • Maintains telephone and/or radio contact with operation and management personnel, • Maintains regular and punctual attendance, • Other duties as assigned Working Style to Be Successful in This Role: • Effectively communicate and work collaboratively at all levels of the organization in diverse work group settings and in concert with external resources., • Effectively use a variety of media (i.e., MS office suite, etc.) to convey technical data, concepts and ideas. Technical Skills & Requirements: • Strong knowledge of PLC/HMI/SCADA/DCS hardware and software., • Strong knowledge of various instrumentation, including flow, temperature, pressure, and valves., • Must have experience with development and integration of various communication protocols such as CIP, Modbus RTU and Modbus TCP/IP., • Be able to read and understand P&ID and PFD diagrams., • Must be proficient in the use of Microsoft Office Suite including Word, Excel, and Outlook., • Will work closely with the operations and maintenance lead personnel along with the Plant management., • Highly analytical with great attention to detail., • Demonstrated strong communication skills., • Exemplifies the right motivation by aspiring to achieve collective goals., • Collaborative and interpersonal skills., • A process-focused individual with a passion to drive and deliver effective change., • Self-motivated and proactive, with respect to both managing workload and professional development., • Ability to work in a dynamic, complex, fast-paced environment, to adapt quickly and to manage changing priorities. Professional Experience & Knowledge: • Associates Degree or vocational/ technical trade school in an electrical or electronic discipline or equivalent experience, • 1-3 years of previous work experience in a manufacturing or industrial process plant environment is strongly preferred Physical Requirements: • Frequent movement throughout plant areas (including mechanical rooms and platforms), • Must be proficient with all types of hand tools and power tools both electric and pneumatic., • Must be able to work with all types of PPE including (but not limited to); dust mask, half-face respirator, all manner of hand protection, eye protection and hearing protection., • Must be able to perform the following work in a safe manner; overhead, climb ladders, squat, bend, lift 100 lbs, perform in a confined space, dusty and noisy environment, work outdoors, plenum spaces, hot and cold environments., • Must be willing to work holidays, weekends and over-time., • Must be willing to work during all types of weather events including hurricanes and storms. Who is CenTrio? CenTrio is a fully integrated, innovative and sustainable energy services provider to a wide range of industries such as higher education & healthcare campuses, cities, and communities. It serves more with utility infrastructures serving more than 170+ million square feet of space and operations in 10 cities across the United States and growing. In each community, the company operates highly efficient and innovative utility infrastructures that produce and distribute electricity, steam, hot water and/or chilled water to customer buildings and campuses. Customers connected to these systems enjoy multiple benefits including reduced operating costs, lower emissions and unmatched reliability. CenTrio is a wholly owned subsidiary of a global Infrastructure Investment Consortium with unmatched financial wherewithal and manages a portfolio of long-life, high quality infrastructure assets with high barriers to entry that generate stable and growing cash flows. Why Join CenTrio? CenTrio offers a dynamic and friendly work environment, dedicated to nurturing a top-notch team culture! Additionally, CenTrio offers an array of fabulous benefits and perks. • Medical Benefits first day of hire, • Medical, dental, vision, Life & AD&D benefits, • Option of supplemental Life & AD&D benefits, • Company paid High Deductible Healthcare Benefit Plan, • 401k plan with % match, • Training Opportunities and career progression, • Competitive salaries that reflect the value of skills and experience, • Dynamic and friendly work environment in a rapidly expanding industry with a national presence, • Remote, Hybrid, and In Office schedules available dependent on job responsibilities, • 24-hour Employee Assistance Program/Hotline, • Corporate discounts (Travel, Entertainment, Home, Auto, Apparel, Health and Wellbeing, and other various retail options)

Job Description We are LOTTE BIOLOGICS! Delivering Therapies That Enable a Healthier World. A new company, built on 80 years of tradition. We embody our core values of being Inspired by Science, Embracing Diversity, Fostering Talent, and Connecting Lives. Our mission is to be the most trusted partner in the industry, with high standards of quality and continuous innovation, to reliably deliver benefits for patients worldwide. Position Summary The Manager, Process Safety is responsible for leading and continuously improving the site's Process Safety Management (PSM), Electrical Safety, and Energy Control programs. This position serves as the site Subject Matter Expert (SME) for process safety and operational risk management, ensuring compliance with applicable federal, state, and local regulations, industry standards, and company policies while supporting safe, reliable, and compliant manufacturing operations. Additionally, this position will be the lead HSE contributor for maintenance of LOTTE's International Organization for Standardization (ISO) 45001 certification. The position partners closely with Operations, Engineering, Facilities, Maintenance, Quality, Validation, and Corporate HSE to identify, assess, and mitigate risks associated with manufacturing processes, utilities, equipment, and facility operations. This position drives a proactive safety culture through technical expertise, risk-based decision-making, regulatory compliance, and continuous improvement initiatives. This position must comply with all Security requirements, Health, Safety, and Environment (HSE) regulations, and current Good Manufacturing Practices (cGMPs) applicable to the job function. Duties & Responsibilities • Serve as the site Subject Matter Expert (SME) for Process Safety Management (PSM), Electrical Safety, and Energy Control (LOTO) programs., • Lead the implementation, maintenance, and continuous improvement of site Process Safety Management programs to ensure compliance with OSHA PSM, EPA Risk Management Program (RMP), NFPA requirements, and company standards., • Facilitate Process Hazard Analyses (PHA), HAZOP studies, risk assessments, and other structured hazard evaluation processes to identify, assess, and mitigate operational risks., • Manage the site's Management of Change (MOC) program, ensuring health, safety, environmental, quality, and operational risks are appropriately evaluated and controlled prior to implementation., • Partner with Operations, Engineering, Facilities, Maintenance, and Quality teams to integrate process safety principles into manufacturing operations and business processes., • Support the design, installation, startup, qualification, and modification of manufacturing equipment, utility systems, facilities, and processes to ensure safety and regulatory requirements are met., • Administer and continuously improve Electrical Safety and Energy Control programs, including Arc Flash assessments, Lockout/Tagout compliance, training programs, and risk mitigation activities., • Lead process safety reviews associated with new technologies, capital projects, process modifications, and equipment installations.\, • Coordinate internal and external ISO45001 audits with third-party consultants and internal resources. Contribute to other ISO certifications as assigned., • Execute industrial hygiene exposure monitoring in coordination with the site's Industrial Hygienist., • Act as the HSE representative for client projects as assigned., • Conduct compliance audits, inspections, program assessments, and field observations to evaluate effectiveness of safety controls and identify opportunities for improvement., • Lead or facilitate incident investigations, root cause analyses, and development of corrective and preventive actions (CAPAs) related to safety, process safety, and operational events., • Monitor, analyze, and report process safety and HSE metrics, key performance indicators (KPIs), and leading indicators to drive continuous improvement., • Maintain regulatory records, compliance documentation, and required reports for internal and external stakeholders., • Support contractor safety and qualification programs to ensure adherence to company safety requirements and industry best practices., • Serve as a site representative during regulatory inspections, customer audits, and corporate assessments related to process safety and HSE compliance., • Deliver technical training, coaching, and guidance on process safety, hazard recognition, risk mitigation, and regulatory requirements., • Participate in emergency response planning and provide technical support during emergency events and operational incidents., • Stay current with emerging process safety technologies, regulatory developments, and industry best practices to enhance site performance., • Support the Senior Manager, HSE with departmental objectives, strategic initiatives, budgeting activities, and continuous improvement efforts., • Participate on cross-functional teams, committees, and corporate initiatives as required., • Perform other duties as assigned. Education & Experience • Bachelor's degree in Environmental Health & Safety, Engineering, Industrial Hygiene, Chemistry, Biology, Occupational Health, or a related discipline required., • 7+ years of experience in Process Safety, Health, Safety & Environment (HSE), Operational Risk Management, or HSE program leadership within pharmaceutical, biologics, biotechnology, chemical, or other highly regulated manufacturing environments., • Demonstrated success leading risk assessments, process safety initiatives, incident investigations, and regulatory compliance programs., • Experience supporting enterprise-wide process safety and operational risk initiatives across complex manufacturing operations., • Professional certification such as: Certified Safety Professional (CSP), Certified Industrial Hygienist (CIH), Certified Process Safety Professional (CCPSC), or an equivalent credential preferred., • Knowledge of Arc Flash hazards, electrical safety, and NFPA 70E compliance programs preferred. Knowledge, Skills, Abilities • Strong knowledge of OSHA Process Safety Management (PSM), EPA Risk Management Program (RMP), NFPA standards, Electrical Safety, and Energy Control (LOTO) requirements., • Experience conducting Process Hazard Analyses (PHA), HAZOPs, risk assessments, incident investigations, and Management of Change (MOC) reviews., • Experience with the ISO45001 standard and maintaining a certified occupational health and safety management system., • Familiarity with standard industrial hygiene monitoring techniques including noise dosimetry, air sampling, and real-time monitoring instruments., • Working knowledge of cGMP requirements and pharmaceutical, biologics, biotechnology, or regulated manufacturing environments., • Strong understanding of risk management methodologies and operational excellence principles., • Ability to analyze complex technical issues and develop practical risk-based solutions., • Strong leadership, project management, organizational, and influencing skills., • Excellent written, verbal, and presentation communication skills., • Proficiency with Microsoft Office applications and HSE management systems., • Experience utilizing data analytics, performance metrics, and reporting tools to drive continuous improvement., • Ability to work independently and effectively within cross-functional teams., • Korean language proficiency is beneficial but not required. Physical Demands • Ability to sit, stand, walk, climb stairs and ladders, and traverse manufacturing, utility, warehouse, and office areas for extended periods., • Ability to conduct field inspections, audits, risk assessments, and incident investigations in operating manufacturing environments., • Ability to wear required personal protective equipment (PPE) and comply with site safety requirements., • Ability to lift, carry, push, and pull up to 25 pounds occasionally., • Ability to access confined or restricted industrial spaces, elevated work areas, and outdoor locations when required and in accordance with site safety procedures., • Ability to respond to emergencies, incidents, and business-critical situations, including occasional after-hours support for a 24/7 manufacturing operation., • Ability to travel between facilities and vendor or contractor locations as business needs require. Work Environment • This position operates in both office and manufacturing environments., • Routine exposure to active production, utility, laboratory, warehouse, and construction areas should be expected., • Position is based on a manufacturing campus and requires frequent presence in operational areas to support risk assessments, inspections, audits, investigations, and safety initiatives., • Work may involve exposure to noise, moving mechanical equipment, chemicals, temperature variations, and other industrial conditions typical of pharmaceutical and biotechnology manufacturing facilities., • Access to GMP and classified manufacturing areas is required and may necessitate the use of appropriate PPE, including safety glasses, hearing protection, safety footwear, hard hats, respirators, and other site-required protective equipment., • Occasional work outside of normal business hours may be required to support incident response, project activities, shutdowns, or a 24/7 manufacturing operation. Travel Less than 5% travel is required for this position. Target Bonus 10% Work Location: East Syracuse, NY New York Pay Range $76,000—$113,000 USD We are an Equal Employment Opportunity ("EEO") Employer. We believe that women, people of color, veterans and LGBTQ communities must participate in the work we do, so we strongly encourage applications from people with these identities or who are members of underrepresented communities! If this is the work that you want to do, in a culture of inclusion and excellence with the goal of making our world to be a healthier place, then please apply today!

Job Description Come join our team! As a diesel mechanic, you will perform complex operations including engine, electrical, fuel, brake, and exhaust repairs on large commercial vehicles. Following OEM and other standards, you will perform thorough preventive maintenance inspections, along with roadside and emergency service repairs, among other duties. Candidates must have accreditation from a school or certification program, proven experience, and be able to pass a background check. Read more to apply! Job Type: Full-Time Schedule: Monday-Friday Location: Syracuse, NY Hours: 40 Hours (Opportunity for overtime) Pay Rate: $32.02 What we offer: • Health, Life, Vision, Dental, • PTO, • 401K (Matching) Responsibilities: • Perform thorough, accurate preventative maintenance inspections., • Following schedules, complete all required maintenance operations including lubrication, fluid changes, brake adjustments, and tire rotation., • With direction from the Fleet Maintenance Supervisor, performs unscheduled maintenance as needed., • Performs complex operations including engine, electrical, fuel, brake, and exhaust repairs and field tests. This requires interpreting and working from drawings, specifications, and other technical materials., • Perform emergency roadside services as needed., • Inspection of equipment and diagnose mechanical defects., • Document repairs and parts on work orders completely and accurately, • Maintain tools and workplaces so that conditions are neat and orderly., • Performs other duties as required., • Emergency conditions may require on call service calls, extended hours, or weekend work flexibility., • May, on occasion, be required to drive vans, buses, and vehicles to perform road tests etc., • Perform other duties as required. Qualifications: 1+ year(s) experience as diesel mechanic or mechanic preferred. Accreditation from a school or certification program preferred. Complete all training requirements. Pass Pre-employment screenings. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. STA is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants; returning military are strongly encouraged to apply. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status, or any other classification protected by federal, state, or local law.

Job DescriptionDescription: Job Summary Feldmeier Equipment is seeking a Controls Engineer to join our Manufacturing Engineering team. This position will play a critical role in supporting, troubleshooting, and improving manufacturing equipment across our facilities. The Controls Engineer will be responsible for reverse engineering legacy equipment, including IMCAR systems, while developing and maintaining controls solutions for new and existing automated equipment. This role combines hands-on troubleshooting with engineering design and continuous improvement initiatives to support production, quality, safety, and operational efficiency. Requirements: Essential Duties and Responsibilities · Reverse engineer existing manufacturing equipment to understand, document, and improve machine functionality. · Troubleshoot electrical, controls, PLC, HMI, servo, VFD, and automation-related issues on production equipment. · Design, develop, modify, and maintain PLC and HMI programs. · Support the installation, startup, commissioning, and validation of new manufacturing equipment. · Create and maintain electrical schematics, controls documentation, wiring diagrams, and equipment manuals. · Work with Manufacturing Engineering, Maintenance, Quality, and Production teams to identify and implement process improvements. · Analyze machine performance data and recommend improvements to increase equipment reliability and efficiency. · Develop preventive maintenance recommendations and troubleshooting procedures. · Assist with integrating robotics, automation technologies, and Industry 4.0 initiatives where applicable. · Support vendors, contractors, and equipment manufacturers during installations, upgrades, and repairs. · Train maintenance technicians and production personnel on equipment operation and troubleshooting. · Ensure all equipment controls comply with safety standards and company policies. · Participate in root cause analysis and corrective action activities for equipment failures and production issues. Required Qualifications · Bachelor's degree in Electrical Engineering, Controls Engineering, Mechatronics Engineering, or related field; equivalent experience may be considered. · Minimum 3 years of experience in industrial controls engineering, automation, or manufacturing engineering. · Experience programming and troubleshooting PLC systems; Allen-Bradley experience preferred. · Experience with HMI development and industrial networking. · Strong understanding of electrical systems, sensors, motors, drives, and control circuits. · Ability to read and create electrical schematics and technical documentation. · Strong problem-solving and analytical skills. · Ability to work independently and manage multiple projects simultaneously. Preferred Qualifications · Experience reverse engineering machinery and legacy control systems. · Experience with servo systems, motion control, and automated manufacturing equipment. · Familiarity with robotics and automated welding systems. · Experience using AutoCAD Electrical or similar electrical design software. · Understanding of manufacturing processes involving stainless steel fabrication, welding, machining, rolling, or forming equipment. · Knowledge of industrial communication protocols including Ethernet/IP, Modbus, and Profinet. Physical Requirements · Ability to work in both office and manufacturing environments. · Ability to stand, walk, climb ladders, and access manufacturing equipment. · Ability to occasionally lift up to 50 pounds. · Ability to work around energized electrical and automated equipment while following all safety procedures. Key Success Measures · Reduced equipment downtime. · Improved machine reliability and production efficiency. · Successful implementation of automation and controls improvements. · Complete and accurate controls documentation. · Effective support of production and maintenance teams.

Job Description We are looking for a Toolmaker I to join our R&D Machine Shop team at Bluefors in Syracuse, NY. In this role, you will support the development of innovative cryogenic products by producing prototype parts, tooling, and components used to validate new concepts and designs. This is an exciting opportunity for a skilled machinist who enjoys precision work, problem-solving, and contributing to cutting-edge technology in a collaborative research and development environment. Interested? Keep reading! Your tasks will include studying blueprints, sketches, models, and verbal instructions to determine the materials, tooling, and machining processes required to fabricate prototype and custom parts. You will set up and operate manual machine tools, including lathes, milling machines, grinders, and other equipment, while maintaining precise tolerances and verifying conformance to specifications. In addition, you will perform hand and bench work as needed, create specialized tooling for manufacturing and R&D applications, and modify existing parts according to engineering instructions. You will support departments by meeting project deadlines, maintaining accurate records, performing housekeeping and preventive machine maintenance, and always adhering to Bluefors quality and safety standards. We are looking for a candidate who has completed apprentice training or possesses an equivalent combination of education and hands-on machining experience. The ideal candidate will have experience operating manual machine tools in a job shop or prototype environment and demonstrate the ability to machine intricate parts from drawings or sketches. You should have strong blueprint-reading skills, including familiarity with GD&T principles, and be comfortable using measuring tools to verify dimensions and tolerances accurately. Excellent math skills, hand-eye coordination, and written and verbal communication abilities are essential. You should also be dependable, detail-oriented, and capable of working both independently and collaboratively within a team environment. We also appreciate candidates who have experience machining a variety of metals and materials, including copper and stainless steel, as well as those with a strong mechanical aptitude and passion for precision craftsmanship. Experience supporting research and development projects, creating custom tooling, or troubleshooting machining challenges will help you stand out. Candidates who demonstrate flexibility, adaptability, and a commitment to continuous learning and process improvement will thrive in this role. A positive attitude and alignment with our values of safety, teamwork, and organizational effectiveness are highly valued. We offer you an interesting, challenging, and responsible position, along with the support of a highly skilled and growing organization. This is an excellent opportunity for your professional growth in a dynamic, enthusiastic, and collaborative team where we work together and support each other. We foster a multicultural work environment with room to grow, where you can use your potential and further develop your skills. We offer a generous benefits package including health, dental, vision, 401(k), long- and short-term disability, life insurance, training, tuition reimbursement, vacation, and Paid Time Off (PTO). Location: Syracuse, NY Pay range: $25.00 – $35.00/hr (DOE) Main Responsibilities include the following: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Study blueprints, sketches, models, and verbal instructions to determine machining requirements Set up and operate manual machine tools, including lathes, milling machines, grinders, and related equipment Machine and finish prototype and custom parts to precise tolerances Verify conformance of machined parts to specifications using measuring tools Perform hand and bench work as required to complete products Create specialized tooling for manufacturing and R&D applications Modify existing parts according to engineering instructions Meet deadlines and support multiple departments as needed Perform housekeeping duties and preventive maintenance on machines and equipment Maintain accurate records and documentation Adhere to Bluefors quality and safety standards Perform additional duties as assigned What We Expect from You Completion of apprentice training or equivalent combination of education and experience Five or more years of machining experience in a job shop or prototype environment preferred Experience machining materials such as copper and stainless steel Ability to read and interpret blueprints, sketches, and written or verbal instructions Familiarity with GD&T principles preferred Ability to set up and use measuring tools accurately Strong math skills and mechanical aptitude Good hand-eye coordination and attention to detail Strong written and verbal communication skills Ability to work independently and collaboratively within a team environment Dependability, adaptability, and commitment to quality workmanship Commitment to safety and alignment with company Leadership Principles and workplace competencies Excellent command of English, both written and spoken We Also Appreciate Experience supporting research and development or prototype machining projects Ability to create custom tooling and fixtures for specialized applications Experience troubleshooting machining and fabrication challenges Strong organizational and time management skills Willingness to support continuous improvement initiatives Positive, proactive attitude and flexibility in a fast-paced environment Team-oriented mindset with strong collaboration skills Alignment with company values, including safety, diversity, and organizational effectiveness Physical Demands While performing the duties of this job, the employee is frequently required to stand, reach with arms and hands, and use hand and finger dexterity. The employee is occasionally required to walk, stoop, kneel, crouch, or crawl and talk and hear. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required include close, distance, and peripheral vision, depth perception, and the ability to adjust focus. Work Environment This role operates in a manufacturing environment and interacts primarily with internal customers in a professional, courteous, and cooperative manner. Required personal protective equipment (PPE) must be worn as applicable. The employee is frequently exposed to moving mechanical parts and may occasionally be exposed to humid conditions, fumes or airborne particles, heat, cold, risk of electrical shock, and vibration. The noise level in the work environment is usually moderately loud. This role does not offer sponsorship for work authorization. Bluefors Cryocooler Technologies, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration regardless of disability status, veteran status, or any other New York State or federally protected characteristic.

Job Description We are partnering with a growing aseptic manufacturer in the Central New York area that is looking for a hands on, visible Plant Manager for a state of the art facility. This role will have full responsibility for site operations, including production, maintenance, quality, safety, staffing, and continuous improvement. The Plant Manager will play a critical role in mentoring management, establishing operational goals, and ensuring the facility operates efficiently while maintaining the highest standards of safety and product quality. Location: Syracuse, NY area Job Responsibilities: • Lead and coordinate the day to day manufacturing operations, • Oversee staffing, hiring, onboarding, training, and performance management, • Establish and execute production schedules to meet customer demand and operational goals, • Drive productivity improvements, cost reductions, and operational efficiencies, • Develop and enforce plant policies, SOPs, and performance standards, • Ensure compliance with all food safety, quality, and regulatory requirements, • Collaborate with engineering and maintenance to support utilities, refrigeration, wastewater, preventive maintenance, and capital projects, • Manage annual operating budgets and control departmental expenses, • Maintain a strong presence on the production floor to support and engage employees, • Partner with quality and engineering to investigate customer and consumer complaints, • Build relationships with regulatory agencies, vendors, and suppliers, • Support ongoing employee development and leadership training initiatives, • Participate in off-shift and weekend activities as needed to support plant operations and food safety programs Required Qualifications • Aseptic manufacturing experience is required, • 5+ years of Plant Manager or senior manufacturing leadership experience in manufacturing is required, • Must have a hands-on approach to leadership, visible leader, • Proven ability to lead large teams in a fast-paced, highly regulated manufacturing environment, • Strong knowledge of sanitation, allergen control, and regulatory compliance, • Experience managing budgets, capital projects, and continuous improvement initiatives, • Bachelor’s degree is ideal, • Excellent communication and leadership skills, • Proficiency with Microsoft Office and related operational software tools

Job Description We’re seeking a highly organized, detail-oriented and customer-focused Spare Parts Coordinator to join our growing Service team in Syracuse, NY. Do you have experience managing inventory, logistics, replenishment planning or warehouse operations? Are you comfortable working with inventory management systems and analyzing data to ensure parts are available when and where they are needed? Do you enjoy working across teams and supporting customers in a fast-paced, technical environment? If yes, please keep reading! As a Spare Parts Coordinator, you will own and operate Bluefors’ North American spare parts operation from our Syracuse warehouse and logistics hub. You will be responsible for maintaining inventory levels, coordinating replenishment and order fulfillment, and ensuring critical replacement parts reach customer sites quickly and efficiently. This highly visible role will serve as a key liaison between Service, field service engineers, customers, warehouse partners and our Finland operations team. Your tasks will include managing inventory for the North American installed base, identifying critical spare parts and maintaining min-max inventory levels based on system types and failure frequency. You will coordinate replenishment, process spare parts orders, arrange shipments and monitor stock availability to support customer service needs and minimize equipment downtime. You will also manage the commercial relationship with our Syracuse warehouse partner, audit inventory and shipment data, maintain accurate SKU and inventory records, and identify slow-moving inventory. Working closely with the Service team, you will forecast demand, proactively stage parts for preventive maintenance activities and track parts expenditures by customer and system type. You will also coordinate international freight and customs documentation for shipments from Finland when parts are not available locally, support reporting and continuous improvement initiatives, and help improve warehouse operations, inventory accuracy and overall service efficiency. We offer a generous benefits package including health, dental, vision, 401(k), long- and short-term disability, life insurance, training, tuition reimbursement, and Paid Time Off (PTO). Location: Syracuse, NY Pay range: $25.96 - $31.73/ hr. (DOE) Your main responsibilities would be Own and operate the North American spare parts hub in Syracuse, including inventory levels, replenishment cycles and fulfillment activities. Maintain a min-max inventory model by identifying critical spare parts based on system type, failure frequency and service requirements. Manage the commercial relationship with the Syracuse warehouse partner, including inventory access, replenishment protocols and service level commitments. Process spare parts orders and coordinate shipments to customer sites while supporting targeted delivery timelines. Maintain and audit inventory, shipment and related data within inventory management systems. Collaborate with the Service team to forecast spare parts demand associated with preventive maintenance visits and proactively stage required inventory. Coordinate local inventory replenishment and monitor stock availability to minimize customer downtime. Audit warehouse inventory, maintain an accurate SKU catalog and identify slow-moving inventory. Track parts expenditures by customer and system type to support service cost analysis. Coordinate import customs documentation, freight logistics and import requirements for shipments from Finland when local inventory is unavailable. Maintain accurate inventory records and prepare inventory and logistics reports as requested. Support continuous improvement initiatives related to warehouse operations, inventory accuracy and service efficiency. Perform other duties as assigned. What we expect from you High school diploma/GED with a minimum of 3 years of experience and/or training in supply chain, logistics, spare parts management, warehouse operations or inventory control; or an associate or bachelor’s degree in Supply Chain Management, Logistics, Business Administration or a related field. Equivalent combination of education and experience will also be considered. Hands-on experience managing physical inventory, replenishment planning and inventory optimization. Strong organizational skills and attention to detail, with the ability to manage multiple priorities while maintaining accurate inventory and documentation. Experience using ERP, inventory management or CRM systems and the ability to export and analyze data using spreadsheets. Proficiency in Microsoft Office Suite, particularly Excel, for reporting, inventory tracking and data analysis. Strong analytical and problem-solving skills, with the ability to analyze inventory trends, identify stocking requirements and make recommendations that improve service levels and inventory performance. Excellent written and verbal communication skills, with the ability to collaborate effectively with customers, field service engineers, warehouse partners and global operations teams across multiple time zones. Ability to work independently in a fast-paced environment while staying aligned with internal teams. Professional, customer-oriented presence when working with customers and external partners. Willingness to travel as required. We also appreciate Experience with Salesforce, ERP or other inventory management systems. Knowledge of shipping, freight coordination, customs documentation and import/export processes. Familiarity with international freight, customs documentation and import compliance. Experience supporting technical, scientific, manufacturing or industrial equipment. Experience maintaining min-max inventory models, cycle counting and inventory optimization. Experience working in a customer-embedded environment while coordinating closely with internal teams. A structured and analytical approach to problem solving. Physical Demands While performing the duties of this job, the employee is frequently required to sit, stand, walk, reach with arms and hands, and use hand and finger dexterity. The employee is regularly required to see, talk and hear. In an office setting, the employee may occasionally stoop, kneel or crouch. The employee will frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Work Environment This role operates primarily in an on-site warehouse and office environment. Occasional travel may be required for customer site visits, training, or meetings with global operations. Personal protective equipment (PPE) may be required when working in warehouse or technical environment. Note: that this role does not offer sponsorship for work authorization. Bluefors Cryocooler Technologies, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration regardless of disability status, veteran status, or any other New York State or federally protected characteristic.

Job DescriptionAbout the Role:GD Mobile Truck Repair Inc is looking for a skilled Mobile Fleet Technician to join our team in Syracuse, NY! This is a hands-on, road-based role where you'll bring expert diesel and fleet repairs directly to our customers — keeping trucks rolling and businesses moving. If you love the freedom of mobile work and take pride in quality repairs, we want to hear from you. Responsibilities: • Perform on-site diagnostics, repairs, and maintenance on commercial trucks and fleet vehicles, • Troubleshoot diesel engines, electrical systems, brakes, and drivetrain components, • Conduct preventive maintenance services including oil changes, filter replacements, and inspections, • Respond to roadside service calls and emergency breakdowns in a timely manner, • Maintain accurate service records and document all repairs and parts used, • Manage and stock mobile service vehicle with necessary tools, parts, and equipment, • Communicate repair findings and recommendations clearly to customers and dispatchRequirements:, • Proven experience as a diesel mechanic, fleet technician, or heavy-duty truck technician, • Strong knowledge of diesel engines, hydraulics, electrical systems, and brake systems, • Ability to work independently in a mobile, field-based environment, • Valid driver's license with a clean driving record (CDL preferred), • Own a basic set of professional mechanic's tools, • Strong diagnostic and problem-solving skills under pressure, • Excellent communication and customer service skills, • Ability to work flexible hours, including potential on-call or weekend availabilityAbout Us:GD Mobile Truck Repair Inc is a trusted name in commercial truck and fleet repair serving the Syracuse, NY area and beyond. We've built our reputation on fast response times, reliable repairs, and keeping our customers' fleets on the road with minimal downtime. Our technicians enjoy the independence of mobile work, a supportive team environment, and the satisfaction of solving real problems for real businesses every day.

Job DescriptionMaintenance Mechanic Why Byrne At Byrne, we foster a culture built on teamwork, excellence, and professionalism. Our greatest strength lies in the exceptional talent and dedication of our team members across every part of the organization. We value their contributions and ensure they’re recognized, rewarded, and compensated in ways that reflect their impact and expertise. Pay and Benefits • Hourly Range - $31.00- $43.00 per hour, • Competitive bonus programs, • Medical, Dental, Vision benefits available day 1 of employment, • Supplemental benefits available on day 30 of employment, • Eligible for 401 (k) with a company match available on day 90 of employment, • Educational Support via tuition reimbursement and scholarship program Work Shift and Location D1 – 6am-630pm 6450 Benedict Rd W East, NY 13057 Job Overview The Maintenance Mechanic plays a key role in executing assigned maintenance tasks. This includes performing full-break downs and rebuilds of production equipment as well as performing preventative maintenance on all production equipment. Key Responsibilities • Perform preventive and corrective maintenance on dairy processing equipment including pasteurizers, homogenizers, separators, pumps, conveyors, and packaging machinery to minimize downtime and ensure continuous production operations., • Diagnose and repair mechanical, electrical, hydraulic, and pneumatic systems using hand tools, power tools, and diagnostic equipment while following lockout/tagout procedures and safety protocols in a food-grade environment., • Troubleshoot and resolve equipment malfunctions quickly to restore production lines, working with programmable logic controllers (PLCs), motor controls, and automated systems common in dairy processing facilities., • Install, calibrate, and maintain instrumentation and control systems including temperature sensors, pressure gauges, flow meters, and automated valves to ensure accurate monitoring of critical processing parameters., • Conduct routine inspections of facility infrastructure including steam systems, compressed air lines, refrigeration equipment, and water treatment systems, identifying potential issues after they impact production., • Maintain detailed maintenance records, work orders, and equipment histories in computerized maintenance management systems (CMMS) while coordinating with production teams to schedule repairs during planned downtime and minimize disruption to operations. Min. Qualifications • GED or High School diploma is preferred., • Minimum 2-3 years’ experience within the mechanical field., • Proficiency with VFDs, stretch/blow molding equipment, conveyors, pumps, pneumatic sanitary valves, and pneumatic/hydraulic systems, along with programmable logic controllers and instrumentation/controls., • Experience maintaining closed cooling systems including evaporator towers, water cooling towers, and industrial chillers used in manufacturing operations., • Food manufacturing environment experience preferred, with HVAC experience considered an additional asset for maintaining sanitary processing conditions. Byrne Headquartered in LaFayette, Byrne is a Central New York-based dairy company with a legacy spanning over 90 years. Its operations include an extended shelf-life (ESL) and ultra-high temperature (UHT) pasteurization plant in DeWitt, as well as an ESL manufacturing facility in Cortlandville. Byrne also maintains warehouse facilities in Syracuse and East Syracuse, along with a dedicated ice cream center in Syracuse. As a recognized industry leader, Byrne continues to drive innovation at the forefront of dairy processing and product development

Job DescriptionMaintenance Mechanic Why Byrne At Byrne, we foster a culture built on teamwork, excellence, and professionalism. Our greatest strength lies in the exceptional talent and dedication of our team members across every part of the organization. We value their contributions and ensure they’re recognized, rewarded, and compensated in ways that reflect their impact and expertise. Pay and Benefits • Hourly Range - $31.00- $43.00 per hour, • Competitive bonus programs, • Medical, Dental, Vision benefits available day 1 of employment, • Supplemental benefits available on day 30 of employment, • Eligible for 401 (k) with a company match available on day 90 of employment, • Educational Support via tuition reimbursement and scholarship program Work Shift and Location N2 – 6pm-630am 6450 Benedict Rd W East, NY 13057 Job Overview The Maintenance Mechanic plays a key role in executing assigned maintenance tasks. This includes performing full-break downs and rebuilds of production equipment as well as performing preventative maintenance on all production equipment. Key Responsibilities • Perform preventive and corrective maintenance on dairy processing equipment including pasteurizers, homogenizers, separators, pumps, conveyors, and packaging machinery to minimize downtime and ensure continuous production operations., • Diagnose and repair mechanical, electrical, hydraulic, and pneumatic systems using hand tools, power tools, and diagnostic equipment while following lockout/tagout procedures and safety protocols in a food-grade environment., • Troubleshoot and resolve equipment malfunctions quickly to restore production lines, working with programmable logic controllers (PLCs), motor controls, and automated systems common in dairy processing facilities., • Install, calibrate, and maintain instrumentation and control systems including temperature sensors, pressure gauges, flow meters, and automated valves to ensure accurate monitoring of critical processing parameters., • Conduct routine inspections of facility infrastructure including steam systems, compressed air lines, refrigeration equipment, and water treatment systems, identifying potential issues after they impact production., • Maintain detailed maintenance records, work orders, and equipment histories in computerized maintenance management systems (CMMS) while coordinating with production teams to schedule repairs during planned downtime and minimize disruption to operations. Min. Qualifications • GED or High School diploma is preferred., • Minimum 2-3 years’ experience within the mechanical field., • Proficiency with VFDs, stretch/blow molding equipment, conveyors, pumps, pneumatic sanitary valves, and pneumatic/hydraulic systems, along with programmable logic controllers and instrumentation/controls., • Experience maintaining closed cooling systems including evaporator towers, water cooling towers, and industrial chillers used in manufacturing operations., • Food manufacturing environment experience preferred, with HVAC experience considered an additional asset for maintaining sanitary processing conditions. Byrne Headquartered in LaFayette, Byrne is a Central New York-based dairy company with a legacy spanning over 90 years. Its operations include an extended shelf-life (ESL) and ultra-high temperature (UHT) pasteurization plant in DeWitt, as well as an ESL manufacturing facility in Cortlandville. Byrne also maintains warehouse facilities in Syracuse and East Syracuse, along with a dedicated ice cream center in Syracuse. As a recognized industry leader, Byrne continues to drive innovation at the forefront of dairy processing and product development

Job DescriptionDescription: Requires the ability to read and write, interpret and read decimals and fractions, and interpret simple schematics. Must own a basic set of maintenance tools. BENEFITS: • Health Insurance, • Life Insurance, • 40 Hours PTO, • 40 Hours Sick Time, • 11 Paid Holidays, • 401k, • 401K Matching, • Up to $700 reimbursement for Dental and Vision claims for employee. ESSENTIAL JOB FUNCTIONS: · Perform a variety of mechanical and millwright maintenance duties with guidance and assistance from other higher classified maintenance mechanics. · Work from detailed instruction or prescribed routine. · Assist on major projects and assist others in the tear down and reassembly of operating mechanism, hold and position work, run errands or other similar assignments. · Perform the more routine assignments involving carpentry, plumbing, masonry, etc., Work, such as cut and rip wood and build or repair floors, stairs, etc., mix mortar or cement and repair concrete surfaces, oil and lubricate equipment, replace defective filters, etc. · Perform scheduled preventive maintenance and report any damaged or faulty equipment during PM. · To maintain continuous movement of work, use hand truck, lift truck, overhead crane to move work to and from designated storage, staging areas, or workstation. · Follow quality control standards to ensure meeting quality and quantity standards. · Keep work area neat and clean on a daily basis. · Adhere to established safety rules and policies. · Notify Supervisor or Safety Director of any unsafe act or practice stopped. · Keep Supervisor full informed of any work-related problems. · Read and interpret measuring devices. · Perform daily lift truck inspections. Requirements: · High school diploma or general education degree (GED) or 3 years work experience. · Practice good oral and written communication skills. · Have or secure forklift certification required. · Participate in training events (ie; Lockout/Tagout; HazCom; and overhead crane training) · Treat all co-workers with dignity and respect. · Possess basic math skills. · Possess basic organizational skills. · Maintain positive attitude towards work and work environment.

Job DescriptionDescription: Maintenance & Facilities Technician Job Description Summary (Position Description): The Maintenance & Facilities Technician supports the maintenance, reliability, and continuous improvement of both facility infrastructure and manufacturing equipment to ensure safe, efficient, and cost-effective operations. This role performs preventive, predictive, and corrective maintenance on facility systems including HVAC, compressed air systems, electrical distribution, plumbing, boilers, and general building infrastructure. The position also supports production equipment such as automated welders, hydraulic presses, assembly equipment, conveyors, custom test cells, and automated manufacturing systems. This role works closely with Manufacturing Engineering and Production teams to troubleshoot equipment issues, improve system reliability, and support future automation initiatives. Candidates should possess strong mechanical and electrical troubleshooting skills and demonstrate an interest in developing expertise in industrial automation, controls, robotics, and advanced manufacturing equipment. Reports To: Manufacturing Engineering Manager Status: Non- Exempt Pay Range: $30-$35 per hour Hours: Monday- Thursday 6am -4:30pm Full Time As a Maintenance & Facilities Technician, you will: · Perform preventive, predictive, and corrective maintenance on facility systems including HVAC, compressed air, boilers, plumbing, lighting, and electrical infrastructure. · Perform preventive maintenance and repairs on manufacturing equipment including but not limited to welders, hydraulic presses, conveyors, assembly equipment, and custom test stations. · Troubleshoot and repair electromechanical system and robotics/automation · Read and interpret electrical schematics, technical drawings, blueprints, and equipment manuals. · Support equipment installations, facility upgrades, machine relocations, and capital improvement projects. · Support automation equipment including PLCs, sensors, VFDs, robotics, control panels, and machine safety systems. · Complete work orders, preventive maintenance tasks, and documentation within the CMMS system. · Support continuous improvement, safety, and reliability initiatives. · Comply with OSHA, EPA, lockout/tagout, and company safety requirements. · Perform additional tasks as directed by management. Who We Are: established in 1934, provides innovative products and services for the refrigeration and air-conditioning market. Our global team of over 3500 employees delivers products that are focused on customer satisfaction; maintaining the optimum temperature in buses, trains, buildings and food storage. Perfection and precision shape our operations; efficiency and sustainability is our way of thinking. BITZER Scroll Inc., a subsidiary of BITZER established in 2006, is a development and production facility located in Syracuse, NY. We are a team of 130 people, designing, laboratory testing, machining and assembling scroll compressors for the global commercial air-conditioning market. Competencies (Knowledge, Skills & Abilities): • Strong mechanical and electrical aptitude., • Minimum 5 years of industrial maintenance, facilities maintenance, or manufacturing maintenance experience., • Experience troubleshooting robotics, mechanical, electrical, pneumatic, and hydraulic systems., • Working knowledge of industrial facility systems including HVAC and compressed air systems., • Ability to read and interpret electrical schematics, wiring diagrams, technical drawings, and equipment manuals., • Ability to work independently and manage multiple priorities., • Strong problem-solving and communication skills., • Strong interpersonal skills for effective cross-functional teamwork., • Working knowledge of CMMS systems and maintenance documentation practices., • Solid PC skills using Microsoft Office applications. Preferred Qualifications: · Experience with PLCs, industrial controls, robotics, automation equipment, and machine integration. · Experience with VFDs, sensors, motor controls, and industrial networking. · Familiarity with CMMS software. · High school diploma or equivalent with 10 years of relevant experience Work Environment: · Employees in this role may work around fumes, airborne particles, machinery with moving parts, vibration, elevated noise levels, electrical equipment, compressed air systems, and other industrial or facility-related conditions. · Personal protective equipment and compliance with company safety procedures are required where applicable Physical Demands: · This role requires speaking and listening as part of daily tasks and may require standing, walking, bending, kneeling, stooping, crouching, crawling, climbing, and working in or around equipment throughout the day. · Employees are frequently expected to lift or move objects weighing 50 pounds or less. The position also requires visual abilities including near and far vision, color differentiation, peripheral vision, depth perception, and the ability to adjust focus. Employee Benefits: Employer paid Life Insurance, Short-Term and Long-Term Disability Benefits $5 a week health insurance coverage 3% Employer 401K contribution Other Information Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Employees are required to follow any job-related instructions and to perform job-related duties requested by management. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodation. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This Job Description does not imply an employment contract. BITZER Scroll is an at-will employer. BITZER Scroll is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. Requirements: Preferred Qualifications: · Experience with PLCs, industrial controls, robotics, automation equipment, and machine integration. · Experience with VFDs, sensors, motor controls, and industrial networking. · Familiarity with CMMS software. · High school diploma or equivalent with 10 years of relevant experience

Job Description Perks: Competitive Pay, Potential Bonus Incentives, Employee Discounts, Growth Opportunities Position: Manager in Training Reports to: Store Manager Status: Full time Annual Salary is $50,024 + Bonus for a 48 Hour Work Week * Resume is required for consideration. Please attach to your application or email to recruiting@mirabito.com BENEFITS – for all eligible employees*: • Paid Time Off, • Employee Assistance Program, • Tuition Assistance*, • Health, Dental, & Vision*, • 401k Plan with Company Match*, • Group Term Life Insurance* ESSENTIAL FUNCTIONS – include and are not limited to: • Continuously learn, grow and advance to the Store Manager position within the designated market area., • Continuously develop the skills needed to hire, train and manage employees., • Consistently the policy and procedures of completing cash handling, safety, maintenance and merchandising responsibilities., • Perform all duties the Store Manager does in their absence., • Complete the 8 week training program and be able to perform all necessary duties to run a store., • Frequently remain stationary for long periods of time., • Be able to position self to stock and front shelves and coolers, sweep and mop floors, dust shelves, move trash containers and place in an outside bin, clean the parking lot and grounds (including gas pumps) surrounding the location and have the means to clean windows around the store in accordance with company standards., • In order to maintain a clean, safe environment to ensure the store is presentable; be able to position self to properly clean and maintain store equipment/products and areas including but not limited to coffee, fountain drinks, deli, customer seating areas, restrooms and shower stalls in accordance with company standards., • Be able to enter and work in a cooler at a temperature of 30 degrees up to 30 minutes at a time., • Be able to meet the physical demands such as transporting and moving store products and equipment weighing up to 50 lbs. (including shoveling snow) when needed., • Be able to react to a fire by using a fire extinguisher weighing 25 pounds and transporting it to the fire area., • Comply with all policies and procedures in company provided handbooks and or manuals at all times. RESPONSIBILITIES – include and are not limited to: Administrative • Protect company funds and assets through monitoring of cash and credit card handling and banking procedures, • Complete daily and monthly paperwork requirements (pricing, payroll, invoices, sales, monthly cash and inventory control, maintenance review, water checks, gasoline and market surveys, reports, projects) in order to ensure compliance with company standards and protection of its assets., • Maintain store records: shift reports, computer reports and records, daily sales reports, payroll, personnel information as well as various in-store logs and audit maintenance., • Submit complete and accurate employee information/documentation to the Human Resources Department on a timely basis; including payroll submission every Monday morning., • Abide by all safety related procedures as required by the company especially while working with cleaning products and other hazardous materials inside and outside the store and while exposed to gasoline fumes., • Protect company assets at all times, in accordance with company policy and procedures. Customer Service • Provide enthusiastic customer service to all customers and ensure staff does the same., • Handle customer complaints fast and effectively to ensure that we provide all of our customers with the best buying experience. Inventory and Cash Control • Monitor and maintain credit card and check cashing procedures as set by the company policies., • Follow all guidelines and cost control goals including but not limited to damaged merchandise, store waste and supplies., • Protect product supply and physical merchandise inventories, audit maintenance, and security procedures., • Ensure that all pricing and scanning procedures and guidelines are correct as listed in the pricebooks for all merchandise., • Responsible for controlling the inventory and cash in the store., • Ensure that the following procedures and tasks are performed correctly: vendor check-in, shift change and reporting change fund, employee purchases, money orders, lottery, credit card, check cashing and banking and payroll submission for your store., • Responsible for audit maintenance on a daily basis within company guidelines in order to achieve a less than 1% shrink and increase sales and profit. P & L Sales Performance and Promotional Execution • Assist Store Manager in monitoring and maintaining the store budgets as it is set for your store., • Stay up to date with competitive marketing conditions/trends and advise District Manager through verbal and written reports to ensure achievement of C-Store Division marketing policies., • Determine required stock levels; plan purchases from vendors based on the Monthly Merchandising and Promotional Calendar, seasonality, and desired profit targets from product mix., • Maintain planograms as instructed by Marketing Department. Training • Provide new employee training and periodically conduct performance evaluation of employees., • Communicate proper practices and procedures in a professional and positive manner, ensuring appropriate progressive counseling techniques are used when needed., • Be able to achieve performance standards as required with respect to: store computer, POS machines, cash registers, equipment and particular systems in operation at the location. Store Presentation • Responsible for food service presentation/appearance/operations and sanitary conditions, • Ensure that the store image is consistent with the company’s standards and reputation for cleanliness, quality products and customer service., • Maintenance: Provide routine preventive maintenance to keep all equipment operating at maximum efficiency. Immediately inform the Store Manager, District Manager, Regional Manager and “FIXIT” of all major equipment problems., • Protect company assets at all times, in accordance with company policy and procedures., • Be able to perform all responsibilities and requirements as specified in the job descriptions of the Assistant Manager and Sales/Food Service Associate. REQUIREMENTS – include and are not limited to: • Provide oneself with a reliable means of transportation to and from work and the ability to be reached by telephone., • Flexibility to accommodate sudden schedule changes and if an emergency arises. QUALIFICATIONS– include and are not limited to: • A high school diploma/GED with some college preferred, or experience in retail and management.

At ZOLL, we're passionate about improving patient outcomes and helping save lives. We provide innovative technologies that make a meaningful difference in people's lives. Our medical devices, software and related services are used worldwide to diagnose and treat patients suffering from serious cardiopulmonary and respiratory conditions. The Resuscitation division of ZOLL Medical Corporation develops and delivers innovative lifesaving products and software solutions to EMS, hospital, public safety, and military customers globally. Our dedicated employees take pride in their commitment to improving patient outcomes while delivering world-class customer service. At ZOLL, you won't just have a job. You'll have a careerand a purpose. Join our team. It's a great time to be a part of ZOLL! Responsible for providing guidance, support to field on-site and PM technicians and performing onsite product support to assigned customer accounts. Product support consists of logistics, deployments, on-site troubleshooting of product, Preventive Maintenance (PM) and software upgrades. Management of software distribution and EDHR updates. • Direct involvement with staffing of department, • Product support on-site, via telephone and through field technicians., • Assist customer with application of equipment., • Escalates customer related issues to Service Manager and CQA Account Manager., • Performs troubleshooting on-site and corresponds with ZOLL Tech Support staff to document activity, • Performs on-site PMs., • Must train yearly, a minimum of 40 hours in ZOLL related products and maintain proficiency., • Potential for deployments to other customers in region at the direction of the manager., • Able to maintain customer specific information related to service activity., • Monthly reporting of department metrics for on-site coverage and PM performance., • Provide software upgrades as requested., • Special Projects as assigned., • Technical Degree (2 year minimum) or equivalent work experience. required, • Prior work experience interfacing with external customers, preferred and, • Valid driver's license required and, • Credit card in good standing for expenses related to travel required, • Excellent verbal & written communication skills., • Ability to meet objectives., • Ability to work independently., • Organizational skills., • Experience with computers and Microsoft Office., • 90% Up to 90% travel required depending ZOLL is a fast-growing company that operates in more than 140 countries around the world. Our employees are inspired by a commitment to make a difference in patients' lives, and our culture values innovation, self-motivation and an entrepreneurial spirit. Join us in our efforts to improve outcomes for underserved patients suffering from critical cardiopulmonary conditions and help save more lives. ZOLL Medical Corporation appreciates and values diversity. We are an Equal Opportunity Employer M/F/D/V. ADA: The employer will make reasonable accommodations in compliance with the Americans with Disabilities Act of 1990 The hourly pay rate for this position is: $25.00 to $35.00 Factors which may affect this rate include shift, geography, skills, education, experience, and other qualifications of the successful candidate. Details of ZOLL's comprehensive benefits plans can be found at www.zollbenefits.com. Applications will be accepted on an ongoing basis until this position is filled. For fully remote positions, compensation will comply with all applicable federal, state, and local wage laws, including minimum wage requirements, based on the employee's primary work location. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, disability, or status as a protected veteran.

Job Description Property Manager & J. G. Stickley, Inc. is a high-end furniture manufacturer and retailer with a long-standing reputation for craftsmanship, quality, and integrity. The company operates manufacturing facilities, retail showrooms, distribution channels, and corporate support functions that depend on safe, reliable, well-maintained facilities and infrastructure. We strive to attract and retain associates who value excellence, accountability, collaboration, safety, practical problem-solving, and continuous improvement. Primary Job Scope The Facilities Manager is responsible for the safe, reliable, cost-effective operation and upkeep of Stickley's facilities, grounds, building systems, utilities, and related infrastructure. This role manages day-to-day facility maintenance, preventive maintenance programs, vendor and contractor coordination, building repairs, safety and compliance support, space planning, capital improvement projects, and emergency response readiness. The Facilities Manager partners closely with Manufacturing, Operations, Finance, Human Resources, Retail, Distribution, Security, and outside service providers to ensure Stickley facilities support productive operations, protect associates and visitors, preserve company assets, and reflect the quality and heritage of the Stickley brand. Primary Major Areas of Responsibility • Facilities Operations and Maintenance: Oversee daily facility maintenance, repairs, inspections, work orders, and service requests across assigned Stickley locations, with priority on safe and uninterrupted manufacturing, distribution, office, showroom, and visitor operations., • Building Systems and Utilities: Manage the reliability and upkeep of building systems, including HVAC, electrical, plumbing, compressed air, lighting, fire protection, security systems, roofs, doors, docks, grounds, parking areas, and related infrastructure., • Preventive Maintenance and Asset Management: Develop, schedule, and monitor preventive maintenance programs for critical building systems and facility assets; maintain accurate records, equipment lists, service histories, warranties, and vendor documentation., • Safety, Compliance, and Risk Reduction: Support OSHA, fire/life safety, environmental, security, insurance, and company policy requirements by coordinating inspections, corrective actions, training support, emergency preparedness, and facility-related safety improvements., • Vendor, Contractor, and Service Management: Source, schedule, supervise, and evaluate outside contractors, service providers, property managers, and vendors to ensure quality work, safe practices, cost control, and timely completion of assigned work., • Capital Projects and Facility Improvements: Assist in developing scopes of work, budgets, timelines, bid packages, and implementation plans for facility upgrades, repairs, renovations, energy-efficiency initiatives, safety projects, and other capital improvements., • Budgeting, Purchasing, and Cost Control: Prepare cost estimates, obtain quotes, manage purchase requests, review invoices, monitor facility spending, identify cost-saving opportunities, and coordinate with Finance on accruals, budgets, and capital planning., • Space Planning and Facility Readiness: Support layout changes, equipment moves, office/showroom/warehouse needs, housekeeping standards, grounds appearance, visitor readiness, and facility conditions that reinforce Stickley's brand and operating needs., • Emergency Response and Business Continuity: Coordinate facility response to storms, utility interruptions, equipment failures, water events, security issues, and other emergency conditions; support disaster recovery planning and post-event corrective actions., • Cross-Functional Communication: Serve as a practical, responsive facilities partner to plant leadership, department managers, associates, and outside partners by communicating priorities, timelines, disruptions, risks, and completion status clearly and proactively., • Continuous Improvement: Identify recurring facility issues, improve maintenance processes, standardize service routines, use data and observation to prioritize work, and recommend practical improvements that reduce downtime, improve safety, and extend asset life., • Other Duties: Perform other related duties, special projects, and responsibilities as assigned by management. Key Qualifications • Minimum of 5 years of progressive experience in facilities management, plant maintenance, building operations, construction coordination, or a related field; manufacturing experience strongly preferred., • Working knowledge of building systems, preventive maintenance, contractor management, facility safety practices, and repair planning., • Experience supporting manufacturing, warehouse, showroom, office, or multi-site environments preferred., • Ability to read and interpret service reports, vendor proposals, maintenance records, drawings, equipment manuals, safety procedures, and basic project documentation., • Strong organizational, communication, follow-through, and problem-solving skills., • Ability to balance urgent repairs with planned maintenance, budget discipline, and long-term facility needs., • Comfortable working hands-on when needed while also managing outside vendors and internal priorities., • Proficiency with Microsoft Office and the ability to use work order, maintenance tracking, purchasing, or facilities management systems., • Valid driver's license and ability to travel between assigned company locations as needed. Preferred Qualifications • Technical degree, trade certification, facilities management certification, engineering background, or equivalent practical experience., • Experience with OSHA, fire/life safety, environmental, security, insurance inspection, emergency preparedness, or energy-efficiency programs., • Experience managing capital projects, building renovations, equipment moves, or major repair projects in an active operating environment., • Knowledge of woodworking, furniture manufacturing, finishing operations, dust collection, compressed air, material handling, or similar industrial systems is a plus. Leadership and Behavioral Expectations • Demonstrates ownership, urgency, and accountability for facility conditions and service response., • Communicates clearly and professionally with associates, managers, vendors, contractors, and leadership., • Maintains a strong safety mindset and takes practical action to reduce risk., • Uses sound judgment when prioritizing work, escalating issues, and committing company resources., • Protects confidential company information, property information, pricing, bids, and vendor relationships., • Represents Stickley with professionalism, integrity, respect, and pride in the company's heritage and brand reputation. Physical Demands and Work Environment While performing the duties of this job, the employee may be required to stand, walk, sit, climb stairs or ladders, access production and mechanical areas, work in manufacturing and warehouse environments, and occasionally lift or move materials consistent with business needs and safety practices. The role may require response outside normal business hours for facility emergencies, weather events, utility interruptions, or other urgent operational needs. Disclaimer The above describes the general nature and level of work assigned and is not intended to be an exhaustive list of all duties, responsibilities, or qualifications required for the position. Duties and responsibilities may change at the discretion of L. & J. G. Stickley, Inc. based on business needs. Benefits: We offer competitive compensation and a comprehensive benefits package that includes: • Flexible Paid Time Off & Paid Holidays, • Group Health, Dental, and Prescription Insurance, • Company-Paid Life Insurance, • 401(k) with Company Match, • Flexible Spending & Health Saving Account, • Generous employee discount, • Access to On-site Health Services, including dedicated nurse and licensed Nurse Practitioner, • Opportunities for Growth & Advancement The compensation range provided in this job posting is a general guideline. When extending an offer, Stickley considers factors including but not limited to the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Stickley is an equal opportunity employer committed to diversity and inclusion. Job Posted by ApplicantPro

Job Description SUMMARY: Supports the daily operations, including maintenance, housekeeping, safety, and vendor management of Destiny USA, ensuring building systems, common areas, and tenant service requests run smoothly under the direction of operations management. The Facilities Coordinator assists with vendor and contractor coordination, process compliance, general facilities delegation and coordination, supervision of maintenance staff, and operational coordination to maintain a safe, efficient, and welcoming property with a strong focus on customer/tenant experience. DUTIES & RESPONSIBILITIES: FACILITIES MAINTENANCE COORDINATION: • Vendor & Contractor Coordination:, • Create new vendor service/preventative maintenance contracts. Work with the Assistant General Manager/Dir of Operations, Office Manager, internal teams, and vendors to scope, budget, negotiate, and create preventive maintenance and service contracts that support our day-to-day operations/building systems., • Monitor and enforce all existing vendor service/preventative maintenance contracts. Schedule and track preventative maintenance/service for HVAC/Building Management System, plumbing, vertical transportation, landscaping/lot sweeping, trash removal, snow removal, janitorial/housekeeping services, and all other building/property internal services according to the executed contracts., • Establish relationships with vendors/contractors and onboard new contractors for bid lists on service contracts, preventive maintenance, and project work., • Document and clearly communicate progress with all vendor agreements and correspondence with vendors on schedules, changes, follow-up items, and issue resolution., • Communicates any changes or risks with service/preventative maintenance contractors to Operations management., • Facilities Maintenance Process Compliance:, • Ensures safety protocols are followed by all internal teams, vendors, and contractors., • Monitors inspections required by law and the Pyramid Management Group Operations manual are scheduled, including, but not limited to, safety equipment inspections, lift inspections, ADA inspections, restaurant inspections, various building system inspections, and all other inspections that ensure OSHA, • Tracks all building system checks completed as scheduled by internal teams and contractors according to daily/monthly/quarterly/annual/ seasonal requirements., • General Facilities and Operations Coordination:, • Administers work orders – create or receive, log, assign to appropriate group, prioritize, and ensure completion of work order tickets in our BITS SharePoint ticketing system., • Responds to tenant maintenance concerns with a strong focus on tenant experience and high-quality merchant relations., • Coordinate with tenants and tenant vendors for access, repairs, and after-hours work., • Tracks to ensure food court and restaurant tenants are meeting code requirements., • Tracks supplies and maintenance materials and orders as needed., • Supports energy management and sustainability initiatives., • Provides general operational leadership and facilities support on weekend shifts to ensure the property is clean, maintained, welcoming, and focused on the best possible customer experience., • Capital improvement project support., • Perform other related duties and special projects as directed by Operations management., • Supervisor of Maintenance Staff:, • Supervises, hires, trains, and evaluates Maintenance staff. EXPERIENCE & QUALIFICATIONS: • 1-3 years of facilities, property management, or operations experience preferred, • 1-3 years of supervisory experience preferred, • Knowledge of building systems, • Strong organization, communication, and vendor coordination skills, • Problem-solving proficiency, • Proficiency with Microsoft Office, • Proficiency with scheduling, • Ability to meet deadlines, • Ability to develop working relationships with tenants and vendors working as a team to produce the best possible outcomes EDUCATION REQUIREMENTS: • High School Diploma required PREFERRED: • Post High School with practical trades training in facilities management, • Bachelor's degree in facilities management, business, or a related field WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee occasionally works near moving mechanical parts; on ladders/lifts, and in various weather conditions. The noise level in the work environment is comparable of that of a busy shopping mall. Shift includes days, nights, and weekends. Job Posted by ApplicantPro

Job DescriptionAssistant Property Manager Location: Syracuse, NY Job Type: Full-Time, On-Site Compensation & Benefits Base Salary: $55,000+, commensurate with experience Performance-Based Bonuses and Year-End Incentives Comprehensive Health Benefits (Medical, Dental, Vision) Generous PTO, Sick Leave & Paid Holidays Career development and advancement opportunities within a growing company Overview Lifestyle Apartments Syracuse is seeking a driven and experienced Assistant Property Manager with strong leasing experience to help lead the stabilization and revitalization of a distressed residential community. This is a hands-on position responsible for supporting the day-to-day operations of the property, with a significant focus on leasing, occupancy growth, resident retention, collections, maintenance coordination, team management, and financial performance. Reporting directly to the Regional Manager, this individual will play a critical role in increasing occupancy, improving property operations, strengthening the resident experience, and helping return the community to strong and sustainable performance. The ideal candidate brings a strong property management background combined with proven leasing experience and the ability to convert prospects into residents. We are looking for someone who is comfortable actively leasing—not simply overseeing the leasing function—and who can step in wherever needed to drive results. What Makes You a Fit We're looking for an "Ideal Team Player"—someone who is: Humble: You’re experienced but coachable, collaborative, and eager to grow. Hungry: You’re self-motivated, results-driven, and always looking for ways to improve operations, increase occupancy, and exceed goals. Smart: You understand people and processes. You collaborate well and adapt effectively to diverse personalities and high-stress situations. Key ResponsibilitiesProperty Operations & Leadership Support and oversee daily property operations, ensuring compliance with company policies, Fair Housing laws, and local regulations Conduct regular property inspections and coordinate timely maintenance, repairs, and preventive care Manage maintenance service requests, prioritizing urgent items and coordinating with vendors and in-house staff Monitor and enforce lease terms, community rules, and safety policies Handle resident complaints and service issues with discretion, professionalism, and prompt follow-through Assist with supervising on-site team members, including leasing, maintenance, porters, and contractors Support scheduling, performance management, coaching, and accountability across the property team Leasing, Marketing & Occupancy Actively participate in the leasing process, including prospect follow-up, property tours, applications, lease execution, and move-ins Maintain and increase occupancy through aggressive, consistent, and strategic leasing efforts Convert leads and property traffic into qualified applications and signed leases Respond promptly and professionally to phone, email, online, and walk-in leasing inquiries Oversee and execute property marketing campaigns across RentCafe, ILS platforms, social media, signage, outreach, and other channels Set and meet leasing goals and regularly review traffic, lead sources, follow-up activity, conversion rates, and occupancy trends Ensure vacant units are market-ready and tours, follow-ups, applications, and move-ins are seamless and professional Identify leasing challenges and recommend changes to pricing, concessions, marketing, outreach, or sales strategies Build strong relationships with prospective and current residents to improve satisfaction, renewals, and resident retention Work closely with the Regional Manager and property team to develop and execute strategies for stabilizing occupancy at an underperforming community Financial Management & Reporting Prepare, review, and manage operating budgets in coordination with the Regional Manager Collect rent, process payments, and oversee delinquency tracking, notices, and evictions in accordance with legal guidelines Maintain and monitor property financials, including accounts payable/receivable, purchase orders, and vendor contracts Prepare and submit monthly, quarterly, and annual reports summarizing key metrics, resident feedback, occupancy trends, and property needs Analyze operational and leasing data to make informed decisions that improve performance and reduce expenses Administrative & Compliance Maintain accurate and organized resident files, contracts, inspections, incident reports, and vendor documents Ensure company policies and federal, state, and local housing laws and safety protocols are consistently upheld Train and onboard new team members and provide ongoing coaching and development Oversee timely completion of required administrative duties, including rent roll updates, delinquency logs, vendor W-9s, and inspection records Create and maintain a resident retention strategy incorporating events, communication programs, renewal outreach, and reputation management Requirements & Qualifications 4+ years of experience in multifamily property management and/or residential leasing Strong hands-on leasing experience with a demonstrated ability to generate traffic, conduct tours, follow up with prospects, overcome objections, and close leases Experience working at distressed, lease-up, turnaround, or underperforming multifamily communities strongly preferred Proven ability to help increase occupancy and improve property performance Strong leadership experience, including team supervision, coaching, and performance management Experience using Yardi Voyager, RentCafe, or similar property management and leasing software Solid understanding of Fair Housing laws, leasing best practices, and applicable housing regulations Strong sales mentality with excellent customer service and relationship-building skills Ability to manage multiple priorities and deadlines in a fast-paced, high-accountability environment High level of professionalism, Powered by JazzHR 0olGHPDALh

Job Description Earnings Potential: $100,000 – $150,000+ / year (Base rate + Overtime + Shift Differential + Travel Pay) Job Title: Overhead Crane Service Technician Company: Somatex Inc. Locations: Rhode Island (Primary focus at defense contractor facility) | Maine Seeking experienced electricians - ideally with experience working on overhead cranes - that are looking for independence, competitive pay, and an incredible quality of life? Somatex Inc. is a premier, fast-growing industrial service provider handling critical infrastructure across New England. We are expanding our team to fulfill high-profile contracts. If you are looking for an environment with minimal micromanagement, a great lifestyle, and top-tier earnings, we want to hear from you! COMPENSATION • Exceptional Package: Earn a competitive hourly base with massive upside. Most of our technicians make $100k to $150k+ annually thanks to consistent overtime, travel pay, and shift premiums., • Relocation Support / Sign-On Bonus: We offer a tiered Sign-On / Relocation Bonus (structured across your first 90 days to 6 months) to help you get settled!, • Shift Premiums: Earn an automatic 10% pay premium on second and third shifts., • Paid Door-to-Door Travel: Your workday starts when you leave your driveway. You are fully compensated for travel time to and from project sites., • Fully Loaded Work Perks: We provide a company vehicle, gas card, credit card, and company cell phone., • Autonomy & Support: Enjoy working independently in structured, high-value industrial environments without someone breathing down your neck. Role Overview As an Overhead Crane Service Technician, you will handle the maintenance, repair, and safety inspection of overhead bridge cranes, gantry cranes, and jib cranes. You will play a vital, hands-on role in keeping critical manufacturing operations running smoothly through expert troubleshooting, routine maintenance, and emergency response. Key Responsibilities • Perform routine, preventive, and emergency mechanical/electrical maintenance on overhead cranes., • Conduct safety inspections and load testing procedures., • Diagnose and troubleshoot complex electrical systems and mechanical components using modern diagnostic tools., • Support equipment setup, upgrades, and new installations., • Work independently on-site at major manufacturing and defense contractor facilities., • Maintain clear service records and uphold strict compliance with OSHA safety standards. Qualifications & Requirements • Licensing: Valid Journeyman or Master Electrical License (Rhode Island required for RI facility; Maine or transferable state license for ME roles)., • Experience: 3–5+ years of experience in industrial electrical troubleshooting and mechanical repairs., • Comfort with Heights: Ability and willingness to work at elevated heights using boom lifts, scaffolding, and platforms in industrial plant settings., • Security & Clearances: Must possess a clean driving record and pass a background check (required for work at defense contractor sites)., • Key Skills: Strong proficiency with electrical schematics, diagnostic tools, and OSHA regulations. Excellent problem-solving and self-management capabilities. \nCompany Description Somatex Inc. is a family-owned company established in 1989 located in Detroit, ME. The company has grown to be one of the top leaders in overhead crane engineering, design, fabrication, service and inspections. Somatex covers New England with skilled technicians to help customers maintain, troubleshoot, repair and modernize existing overhead / hoisting equipment. Customers range from small machine shops and municipalities to Paper Mills and Defense contractors manufacturing submarines and ships. Somatex Inc. is a family-owned company established in 1989 located in Detroit, ME. The company has grown to be one of the top leaders in overhead crane engineering, design, fabrication, service and inspections. Somatex covers New England with skilled technicians to help customers maintain, troubleshoot, repair and modernize existing overhead / hoisting equipment. Customers range from small machine shops and municipalities to Paper Mills and Defense contractors manufacturing submarines and ships.

Goodyear - - Responsibilities: Learn basic automotive services; Mount and balance tires; Perform oil changes; Conduct preventive maintenance; Train with senior technicians.

Maintenance Mechanic IIAnoplate is seeking a Maintenance Mechanic II to perform daily Mechanical repairs and Preventive Maintenance Inspections of production and facility equipment including maintenance and project tasks.The Objective is to support and maintain smooth production operations, safety f

Maintenance Mechanic IIAnoplate is seeking a Maintenance Mechanic II to perform daily Mechanical repairs and Preventive Maintenance Inspections of production and facility equipment including maintenance and project tasks.The Objective is to support and maintain smooth production operations, safety f

Syracuse, NY fabrication facility is seeking a Manufacturing Equipment Technician to support preventive maintenance, tool qualification, and process integration for multiple toolsets.You will collaborate with process engineers to bring equipment online and maintain uptime in a high-precision cleanro

Exercise considerable judgment to plan and perform a variety of difficult steamfitting work where general methods are available. A high school education or equivalent is required. Advanced knowledge of the steamfitting trade equivalent to complete accredited apprentice training is required. At least five years additional practical experience is required. Must provide own hand tools including pipe wrenches (up to 14"), allen, crescent, and open-end wrenches, assorted screwdrivers, files and chisels, hack saw, hammer, pump pliers, tube cutter and benzomatic torch, etc. A valid driver's license; the ability to drive both manual and automatic transmission vehicles. Plan, layout and install new and replacement steam and chilled water systems. Install boilers, thread or weld piping for heating, steam reduction stations, fire protection systems, etc. Maintain and repair existing systems. Inspect, install and repair a variety of pneumatic, electrical and combination valves (most electrical work done by others). Chemically treat water for all systems as instructed. Install steam and chilled water pipe insulation. Plan and perform preventive maintenance duties such as lubricating pumps. May be required to perform duties of HVAC Mechanic. Standing 65% 90% of the shift. Frequent bending at the waist; able to bend to below the knee (50 80%). Frequent stooping and/or crouching (50% 80% of shift). Frequent twisting and bending of head, neck, and torso 75 95%). Full range of arm movement (extension, twisting, and bending of arm and shoulder, reaching overhead, etc.) (50% 95%). Visual and cognitive capability sufficient to read and interpret diagrams and blueprints, troubleshoot and diagnose problems and make repairs. Able to perform mathematical computations as necessary to carry out assignments e.g. for installation of boilers, piping etc. Wrist and finger dexterity and fine motor skills sufficient to use and use a variety of hand tools e.g. screwdrivers, files, wrenches, chisels, etc. Able to handle and operate power tools. Repetitive arm movement (e.g. hammering). May need to work on a ladder, scaffolds, or at other elevated heights. Able to perform all physical functions needed to drive vehicles with manual and automatic transmissions. Able to climb up into and down from truck cab. Able to work in conditions of extreme heat. Able to lift up to 50 pounds. Push/pull up to 75 lbs. May be exposed to flames, smoke, strong odors, dust, chlorine and other chemicals. Install a variety of piping including schedule #40 and schedule #80 black pipe, type 'L' and hard copper pipe, plastic tubing, etc. Use a variety of caustic and non-caustic chemicals for water treatment and cleaning. Operate a pipe threader, welding equipment, and a variety of hand tools. Syracuse University is a private, international research university with distinctive academics, diversely unique offerings and an undeniable spirit. Located in the geographic heart of New York State, with a global footprint, and nearly 150 years of history, Syracuse University offers a quintessential college experience. Syracuse is a medium-sized city situated in the geographic center of New York State approximately 250 miles northwest of New York City. The metro-area population totals approximately 500,000. The area offers a low cost of living and provides many social, cultural, and recreational options, including parks, museums, festivals, professional regional theater, and premier shopping venues. Syracuse and Central New York present a wide range of seasonal recreation and attractions ranging from water skiing and snow skiing, hiking in the Adirondacks, touring the historic sites, visiting wineries along the Finger Lakes, and biking on trails along the Erie Canal. Syracuse University is an equal-opportunity institution. The University prohibits discrimination and harassment based on race, color, creed, religion, sex, gender, national origin, citizenship, ethnicity, marital status, age, disability, sexual orientation, gender identity and gender expression, veteran status, or any other status protected by applicable law to the extent prohibited by law. This nondiscrimination policy covers admissions, employment, and access to and treatment in University programs, services, and activities. Syracuse University has a long history of engaging veterans and the military-connected community through its educational programs, community outreach, and employment programs. After World War II, Syracuse University welcomed more than 10,000 returning veterans to our campus, and those veterans literally transformed Syracuse University into the national research institution it is today. The University's contemporary commitment to veterans builds on this historical legacy, and extends to both class-leading initiatives focused on making an SU degree accessible and affordable to the post-9/11 generation of veterans, and also programs designed to position Syracuse University as the employer of choice for military veterans, members of the Guard and Reserve, and military family members. Syracuse University fosters a welcoming learning environment where students, faculty, administrators, staff, curriculum, social activities, governance, and all aspects of campus life reflect a broad range of perspectives and experiences. The University community values the many similarities and differences among individuals and groups. At Syracuse, we are committed to preparing students to engage with and appreciate the richness of backgrounds, beliefs, and experiences that shape our society. To achieve this, we strive to cultivate a community that respects and encourages open dialogue, understanding, and mutual respect.

Job Description Join a team that nourishes life from farm to table! Upstate Niagara Cooperative, proudly owned by 200+ local family farms, is one of America’s largest and most stable dairy cooperatives. Guided by farmer- and employee-led values, we process and market high-quality milk, yogurt, dips, sour cream, cottage cheese, and more under our trusted brands: Upstate Farms®, Bison®, Milk for Life®, and Intense Milk®. Here, you’ll support sustainable farming, strong communities, and the mission to deliver fresh, local dairy to families every day. The Sanitation Lead is responsible for providing leadership and oversight of the Sanitation Team, which includes janitorial personnel and Pumps/Valves Sanitation Mechanics, across assigned shifts. This role ensures the effective execution of sanitation programs, preventive maintenance coordination, and compliance with food safety, quality, and regulatory requirements throughout production, warehouse, and exterior facility areas. This position is responsible for supporting a safe, clean, and audit-ready environment while ensuring sanitation activities are completed in accordance with established standards and operational needs. The Sanitation Supervisor also functions as a working supervisor and may directly assist with sanitation tasks as needed to support business requirements. Key Responsibilities Leadership & Personnel Management • Assist the Maintenance Manager by providing day-to-day leadership and direction to Sanitation Team members, including janitorial staff and Pumps/Valves Sanitation Mechanics, • Support onboarding, training, and ongoing development of team members to ensure successful job performance, • Monitor performance, and conduct issues and address appropriately in alignment with company policies, • Assist in workforce planning and scheduling to ensure adequate coverage across all shifts, • Conduct routine follow-up and verification of completed sanitation and maintenance-related tasks to ensure alignment with company standards, safety requirements, and operational expectations, • Foster a culture of accountability, teamwork, and continuous improvement Pumps/Valves Sanitation & Preventive Maintenance Coordination • Assist in the scheduling and coordination of preventive maintenance activities for pumps and valves in alignment with established maintenance systems (e.g., TabWare), • Partner with Production and Quality teams to coordinate equipment downtime for removal, sanitation, repair, rebuilding, and reinstallation activities, • Ensure sanitation and maintenance activities are performed in accordance with applicable procedures, regulatory standards, and internal expectations, • Support documentation accuracy and completion for all related maintenance and sanitation activities, • Monitor completion and effectiveness of preventive maintenance and sanitation programs Facility & Janitorial Sanitation • Oversee sanitation operations across production areas, warehouse facilities, and exterior/good neighbor areas, • Ensure sanitation schedules are executed consistently across all shifts in accordance with established procedures, • Monitor cleanliness, sanitation effectiveness, and compliance with food safety expectations, • Identify and address sanitation deficiencies and support corrective actions as needed, • Support continuous improvement initiatives related to sanitation practices and operational efficiency Audit, Food Safety & Regulatory Compliance • Support readiness and execution of internal, customer, and regulatory audits involving sanitation and equipment inspection activities, • Work collaboratively with regulatory auditors during facility and equipment evaluations, • Ensure compliance with applicable standards including OSHA, FDA, HACCP, GMP, and company policies, • Support accurate and timely completion of sanitation and compliance documentation, • Maintain audit-ready conditions within assigned areas of responsibility Communication & Cross-Functional Coordination • Assist in coordinating daily sanitation and maintenance-related activities with Production, Quality, and Maintenance departments, • Communicate operational issues, sanitation concerns, and equipment status updates to appropriate stakeholders, • Support alignment of sanitation activities with production schedules to minimize operational disruption Safety & Housekeeping • Promote and enforce adherence to all safety policies, procedures, and PPE requirements, • Support maintenance of a clean, safe, and organized work environment, • Report safety hazards, equipment issues, and sanitation concerns in a timely manner, • Support safe handling and use of sanitation chemicals and equipment Qualifications Education • High school diploma or equivalent required Experience • Minimum of 2 years of experience in sanitation, maintenance, manufacturing, or food production required, • Previous leadership experience, including lead, senior technician, or other progressively responsible roles, may be considered in lieu of formal supervisory experience, • Experience in food manufacturing or regulated production environments preferred, • Familiarity with preventive maintenance systems (e.g., TabWare or similar platforms) preferred Skills & Competencies • Demonstrated leadership capability and ability to guide team performance, • Strong organizational and communication skills, • Ability to manage multiple priorities in a fast-paced environment, • Problem-solving ability with appropriate support and escalation when needed, • Commitment to safety, quality, and compliance standards, • Ability to work collaboratively across multiple departments Working Conditions (Physical Demands) • Ability to lift up to 50 lbs, • Ability to stand, walk, bend, and reach for extended periods of time, • Ability to work in production, warehouse, and sanitation environments for extended durations, • Exposure to sanitation chemicals, equipment, and mechanical systems, • Ability to respond to operational needs outside of standard working hours when required Pay: $25.00-$35.00 per hour* *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position’s qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Crestline Hotels and Resorts - 300 West Fayette Street - Responsibilities: Maintain timelines and work schedule in accordance with the preventive maintenance program; Check work orders and night report for any assignment to be completed; Perform Preventive Maintenance work orders; Monitor and mainta

As a Maintenance Mechanic at JLL, you will play a critical role in ensuring the safe, efficient operation of mechanical systems and equipment at our East Syracuse, NY facility. Conduct routine inspections and preventive maintenance on building systems, including plumbing, mechanical, fire and life s

The Scion Group - 4101 Brighton Pl - Responsibilities: Maintain property condition per SOP/OSHA; Perform routine maintenance and repairs; Complete preventive maintenance tasks; Document work performed and parts used; Promote positive resident relations.

Sunbelt Rentals - - Responsibilities: Perform preventive maintenance and diagnostics on diesel and heavy equipment; Repair equipment to minimize downtime; Work on diverse equipment including aerial work platforms and generators; Follow safety protocols and adapt to changing priorities.

Perform preventive and corrective maintenance on plant equipment and machinery. Troubleshoot mechanical issues and implement effective solutions. Maintain accurate records of maintenance activities.