Offres project engineer à Bakersfield, CaliforniaCréer des alertes d'emploi

Mechanical Design Engineer – Mining & Industrial Projects Industrial Systems Consulting (ISC) Bakersfield, CA (preferred) | Remote (U.S.) Project Focus: Wyoming Mining Operations Occasional travel to mine sites and project locations Position Overview ISC is seeking a Mechanical Design Engineer with solid surface oil & gas / mining experience to support mining and heavy industrial projects, in partnership with clients across the Mountain West. This role focuses on execution-ready mechanical engineering for operating facilities—bridging detailed design, constructability, and field implementation. The work involves large, rotating and thermal equipment typical of mining and process facilities, where reliability, safety, and operability are critical. The preferred seat is Bakersfield, California, with full-time remote and 1099 contract options available to support fluctuating project demand. Key Responsibilities • Perform detailed mechanical engineering and design for mining and industrial facilities, including:, • Pumps, compressors, and rotating equipment, • Boilers, steam drums, dryers, and thermal systems, • Crushers, material handling equipment, and process machinery, • Piping systems, supports, and mechanical interfaces, • Develop construction-ready engineering deliverables, including:, • Equipment layouts and mechanical drawings, • Design calculations and specifications, • Tie-in details and modification packages for operating plants, • Support execution-focused engineering by:, • Incorporating constructability, access, and maintenance considerations, • Supporting field implementation, troubleshooting, and design clarifications, • Participating in design reviews with Engineering and site teams, • Apply applicable codes, standards, and best practices, including:, • ASME, API, and applicable boiler and pressure system requirements, • Client-specific and site-specific engineering standards, • Interface with:, • Engineering project teams, • Owner/operator engineering, reliability, and maintenance groups, • Field supervisors and construction contractors, • Provide technical support during:, • Equipment installation and commissioning, • Maintenance outages and equipment replacements, • Field changes and as-built documentation Required Qualifications • Bachelor’s degree in Mechanical Engineering (or related discipline), • 10+ years of mechanical engineering experience in mining or heavy industrial environments, • Hands-on experience with:, • Rotating equipment (pumps, compressors, fans, etc.), • Thermal and process equipment (boilers, steam drums, dryers), • Large mechanical equipment common in mining operations, • Strong understanding of:, • Brownfield facilities and operating-plant constraints, • Engineering deliverables that must be built and maintained in the field, • Strong communication skills and ability to work across disciplines, • Willingness to travel periodically to mine sites Preferred Qualifications • Professional Engineer (PE) license, • Experience supporting:, • Mining operations (trona, coal, metals, aggregates, or processing facilities), • EPC, owner-side, or specialty engineering organizations, • Familiarity with:, • Reliability and maintainability-driven design, • Equipment layout, access, and lifting considerations, • AutoCAD, Plant 3D, or similar mechanical design tools Work Arrangement Options ISC offers flexible engagement models to support project demand: • Full-time (Bakersfield-based or Remote) Why ISC ISC is building an engineering execution platform centered on technical depth, practical judgment, and field-proven engineering. Our engineers are trusted to deliver designs that work in real operating environments—supporting safe, reliable, and maintainable assets. If you enjoy solving complex mechanical problems, working closely with site teams, and seeing your designs executed in the field, we’d welcome the conversation.

Title: Senior Software Engineer (Instrument Focus) Work Location: Foothill Ranch, CA Position Type: FullTime Job Description: We are seeking a highly experienced Senior Software Engineer to design and develop robust, scalable, and user-friendly software solutions for a novel medical imaging device. The job responsibilities cover development of software modules for real-time data and image acquisition, design and development of software APIs, and interface with various hardware components. As the person in this role, you will need to have intimate knowledge of working with various hardware modules. You will be at the forefront working on interfacing with key hardware modules within the organization. We are started everything last year from scratch – this role is for someone who wants to make a real difference developing the world’s best ophthalmic platform. You need to be a self-starter, comfortable with a fast-paced workplace, able to achieve goals within a high-level of ambiguity, work across functional lines, and take a hands-on approach to explore and find optimal solutions. Key Responsibilities: • Design and implement software modules for a medical ophthalmic device, • Design and develop interface libraries for a custom 10 Gig Ethernet hardware module, • Implement software modules communicating through RS-232 and other communication protocols • Implement hardware logging and debugging features, • Develop and implement workflows for instrument calibration tools, • Create software libraries and modules to work on the devicce, • Software analysis, planning, design, implementation, and verification of a novel medical device, • Develop software modules and components that meet the software requirements and design inputs • Translate application storyboards and use cases into functional applications, • Design, build, and maintain efficient, reusable, and reliable code, • Co-ordinates and provides input to other developers on interfaces, • Produce high quality testable code according to design specifications, • Document software design specifications, implementation details, and test plans, • Identify and prioritize new software features and applications in conjunction with project stakeholders • Collaborate with product management and engineering teams to define software requirements, architecture, and software interfaces • Participate in code peer reviews with the development team to ensure a high-level of quality is maintained • Contribute to product requirement development and risk management reviews, • Troubleshoot and debug software issues throughout the development process, • Stay current with emerging technologies, industry trends, and best practices in software development Qualifications and Requirements: • Bachelor’s degree in computer science, software engineering, or related field, • 3+ years of experience in streaming imaging pipeline software architecture and development, • Strong programming skills using C/C++, • Strong programming skills with multi-threading and synchronization objects, • Proficiency with network communication protocols, • Experience with synchronous and asynchronous serial communication technologies, • Strong debugging and problem solving skills in complex environments, • Proven analytical skills across hardware/software boundaries, • Strong understanding of software architecture, design patterns, and object-oriented principles, • Experience with Git, • Understanding of electrical engineering fundamentals (analog/digital interfaces, timing, etc) is a plus • Knowledge of Agile software development methodologies, • Familiarity with medical device regulations and standards is a plus, • Excellent problem-solving skills, attention to details, and ability to work effectively in a collaborative team environment • Strong analytical and communication skills, • Self-starter with sense of initiative, • Hands-on and detail-oriented • • High level of integrity and accountability

Mission The mission of the Project Engineer is to support the project team to facilitate successful project outcomes by coordinating with the client, the field, vendors and subcontractors to ensure projects are built on time and within budget. Key Responsibilities • Own plan and specification reviews, employ expertise to clear roadblocks for the most efficient field installation., • Ensure plans and specs, submittals, RFI’s and FCD’s are updated in Procore, and, if plans are also printed, ensure the correct information is available in the Field., • Project schedule coordination and update, constantly evaluating to ensure we are on schedule and reporting potential challenges to the project team., • Price and scope change requests, ensuring that such are coordinated with the field, vendors, and the client in a timely manner., • Verify the accuracy of progress drawings by reviewing them, walking the job to ensure that the drawings are accurate, and ensuring the most recent version is always available in Procore, working through Foreman and Superintendent to resolve any discrepancies., • Review SIP’s and Earned Hours/TRACK for accuracy and trends, reporting wins and challenges to the project team. Job Duties: In addition to the key responsibilities listed, the Project Engineer will execute the following job duties: • Responsible for knowing each project budget and managing the budget, including but not limited to the accurate use of cost codes., • Actively participate in developing a successful Project Plan., • Maintain risk matrix, ensure that it is updated and risks are mitigated by coordinating with project team members., • Serve as A-C support to subcontractors; answering submittals, questions and issues and escalating to Project Management when there is a problem., • Own material tracking process, • Prepare schedule of values for project management review, • Production tracking true-up, • Coordination of project requirement processes including submittals and RFIs, • Own O&M and closeout process, • Identify future leaders, and work to develop others by sharing knowledge, • Champion of safety culture, leading by example and influencing others to be safe Requirements: • Ability to read construction documents including plan set, spec book and contracts., • Applied electrical experience and knowledge through accredited apprenticeship program, college programs, or relevant work experience., • Ability to work under time pressure and adapt to changing requirements with a positive attitude., • Self-motivated, proactive and an effective team player, • Interacts effectively and professionally with internal and external clients. Pay Range: $65,000 – $120,000. Pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, and experience. The total compensation package for this position may also include other elements dependent on the position offered. *A-C Electric Company is an Equal Opportunity Employer; women, veterans, and minorities are encouraged to apply.

Job Description Job Title: Roadway Worker In Charge (RWIC) Location: Bakersfield, CA Job Type: Full-Time FLSA Status: Hourly; Non-Exempt Reports To: District Manager Travel: Yes, travel is expected for this position (50% - 85% on average). Supervisory Responsibility: No Compensation: Negotiable, based on skills and experience. Company Profile: National Railroad Safety Services, Inc. (NRSS) is a certified DBE/WBE firm primarily focused on providing safety services to the railroad industry. NRSS is the most trusted name in the railroad industry for providing qualified field safety staff and safety training. To best serve the railroad industry, NRSS provides all of these services in the continental United States, Canada, and Mexico. NRSS has the proven ability and the proven safety record to handle any project. Find the safety you have been missing today! Job Description: National Railroad Safety Services, Inc. (NRSS) is seeking a Roadway Worker In Charge (RWIC) to support railroad flagging services for Class 1 Railroads, Regional Short Lines, Transit Systems, State DOT's, as well as Railroad Suppliers, Contractors, and Consultants alike. Required Education: High School Diploma or Equivalent. Required Experience: Minimum 2 years of experience with a Class 1 Railroad, Regional Short Line, Transit System, State DOT Rail Division, Railroad Supplier, Railroad Contractor, and/or Railroad Consultant; preferably within the Maintenance Of Way (MOW) Department. Key Success Factors: • Accountability: Accept full responsibility for self and contribution as a team member., • Adaptability & Flexibility: Ability to consider a variety of issues that exist in the work place and change from one task to another as necessary., • Analytical Thinking: Ability to analyze and synthesize information to understand issues, identify options, and support sound decision making., • Attention to Detail: Ability to work in a conscientious, consistent, thorough manner, and attend to details while pursuing quality when accomplishing tasks., • Communication: Ability to clearly convey information and ideas through a variety of media to employees/clients in a clear and succinct manner., • Customer Service Focus: Ability to provide service excellence to internal and/or external clients., • Decision Making: Ability to identify/understand issues, problems, opportunities and take appropriate action based on available facts, constraints, and probable consequences., • Initiative: Ability to identify what needs to be done and take action before being asked., • Innovativeness: Ability to devise new plans for quality excellence., • Knowledge: Ability to navigate various rulebooks and/or regulations and demonstrate mastery., • Organization: Ability to maintain materials and/or records in a clean and ordered manner., • Planning: Ability to plan and prioritize work load to manage time effectively and accomplish assigned tasks., • Stress Tolerance: Ability to maintain stable performance under pressure or opposition (such as time pressure or job ambiguity)., • Teamwork: Promote cooperation and commitment within a team environment to achieve goals and deliverables., • Proficient computer skills in basic email, phone, and text message applications., • Proficient computer skills in Android OS; on tablet & smart phone., • Proficient computer skills in Citrix Applications., • Strong oral and written communication skills., • Strong technical knowledge in Railroad Engineering, Railroad Design, Railroad Construction, and Safety., • High level of accuracy and attention to detail; well organized., • Demonstrated ability to develop and maintain strong client relationships., • Ability to travel for extended periods of time; sometimes month(s) at a time., • Provide jobsite coordination., • Provide clear and concise communication with Dispatchers, Train Crews, other Railroad Personnel, and/or Contractor personnel., • Provide clear, concise, and thorough job briefings with all personnel on each job site., • Enforce all Railroad, State, and Federal Policies., • Identify rule violations and resolve in accordance with Railroad, State, and Federal Policies., • Enforce Contractor training requirements., • Submit daily field reports detailing Contractor and/or Railroad activities. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Must be able to hear, speak, read, and write clearly in English., • Must be able to drive long distances and/or travel by other modes as necessary., • Must be able to stand for long periods of time and/or walk on level/uneven ground., • Must be able to see up close, distances, colors and have use of peripheral vision and depth perception., • Must be able to tolerate extreme heat/cold temperatures., • Must be able to tolerate dusty/noisy conditions. Safety Commitment: All employees of all levels are to remain committed to safety at all times while employed at National Railroad Safety Services, Inc. (NRSS). As such, no job is so important and no service is so urgent that we may not take time to perform all work safely. Simply put, safety is our way of life. By placing safety first, we not only ensure the wellbeing of our employees, customers, and communities, but we hold true our commitment to being the leader in safety throughout the Railroad Industry. Closing Statement: National Railroad Safety Services, Inc. (NRSS) is an Equal Opportunity/Affirmative Action Employer. Any candidate selected for this position must be able to successfully pass pre-employment/recurrent background checks, drug/alcohol testing, and classroom training. Job Posted by ApplicantPro

Our US work group has an opportunity for a Senior Transmission Line Engineer; this individual will sit in any of Stantec's US offices. Project requirements will include detailed engineering and support of transmission line projects (generally 69 kV to 500 kV) from conceptual design through construct

Project Engineer Job Duties: Completes engineering projects by organizing and controlling project elements. Determines project schedule by studying project plan and specifications, calculating time r

California Engineer in Training (EIT) certification or California Professional Electrical Engineer (CA PE) registration desirable. The Temporary Electrical Engineer is responsible for electrical and controls engineering related to the planning, design, project and construction management of water fa

Job Description Job Title: Principal Project Engineer Department: Engineering Procurement Construction (EPC) & Utility Payroll Company Name: California Bioenergy LLC Reports To: Vice President, Project Development (EPC & Utility) Office Location: Bakersfield, CA Annual Salary Range: $140,000 to $165,000 Benefits: Standard CalBio benefits package is available: Medical, dental, vision, life insurance, 401k with match. COMPANY DESCRIPTION California Bioenergy LLC (CalBio), founded in 2006, is one of the nation’s leading developers, owners, and operators of dairy digester projects. Working closely with our family dairy partners and agencies, including CARB, CDFA, CPUC, CEC, and the EPA, alongside affiliates Midwest Bioenergy, Northwest Bioenergy, and Southwest Bioenergy, we capture methane, a potent greenhouse gas, and beneficially use it to generate renewable natural gas (RNG) and electricity. Our projects reduce more than 1 million metric tons of CO₂e emissions per year, with a pathway to doubling these reductions over the next three years. A major use of CalBio RNG is as vehicle fuel; when truck fleets transition from diesel to natural gas, pollution emissions can drop by ~90%, delivering immediate air-quality benefits in communities such as California’s San Joaquin Valley and the L.A. Basin. These projects also help protect local air and water quality, create jobs, and provide new revenue and other meaningful benefits for our dairy partners. POSITION OVERVIEW The Principal Project Engineer plays a significant role in delivering complex renewable‑energy projects from early development through construction and commissioning. A bachelor’s degree in mechanical, Civil, Electrical, or related Engineering discipline with EIT or PE is required. This position will manage the technical aspects of projects while keeping overall project goals in mind. This position blends deep technical expertise with cross‑functional leadership, ensuring that engineering designs are optimized, risks are managed, and projects are executed safely, on schedule, and within budget. ESSENTIAL JOB RESPONSIBILITIES Engineering & Technical Leadership • Lead engineering design, analysis, and optimization for hybrid renewable‑energy projects., • Review and approve engineering drawings, specifications, and calculations prepared by internal teams and external consultants., • Ensure compliance with applicable codes, standards, and permitting requirements (NEC, IEEE, UL, IFC, local AHJ requirements, etc.)., • Conduct technical due diligence for new sites, technologies, and equipment suppliers., • Support energy‑yield modeling, system sizing, and performance analysis. Project Execution • Serve as the technical lead throughout project lifecycle — development, design, procurement, construction, commissioning, and handover., • Coordinate with EPC partners, contractors, and equipment vendors to resolve engineering issues and maintain design integrity., • Oversee technical aspects of procurement, including equipment specifications, bid evaluations, and vendor qualification., • Support construction teams with RFIs, field engineering decisions, and quality‑control oversight., • Participate in commissioning planning, testing, and performance verification., • Cross‑Functional Collaboration, • Work closely with development, permitting, finance, and commercial teams to evaluate project feasibility and optimize designs., • Provide engineering input for interconnection studies, utility coordination, and grid‑integration requirements., • Prepare technical documentation for internal approvals, investment committees, and external stakeholders. Risk, Quality & Compliance • Identify technical risks and propose mitigation strategies throughout the project lifecycle., • Ensure adherence to safety standards, environmental requirements, and quality‑assurance processes., • Maintain accurate engineering records, design revisions, and project documentation. CRITICAL SKILL SETS/KEY COMPETENCIES • Strategic planning and execution, • Stakeholder management, • Budgeting and forecasting, • Technical and quality excellence, • Team leadership and mentorship, • Solid communicator, • Proficient in most technical PC applications. ESSENTIAL JOB QUALIFICATIONS • Bachelor’s degree in mechanical, Civil, Electrical, or related Engineering discipline required., • 7+ years of progressive engineering and project management experience., • Strong knowledge of engineering principles, project delivery methods, and relevant industry codes/standards., • Proficiency in project management tools (e.g., MS Project, Primavera, or similar)., • Excellent problem-solving, analytical, and communication skills., • Proven ability to manage multiple projects simultaneously in a fast-paced environment., • Strong leadership and interpersonal skills with experience leading multidisciplinary teams WORKING CONDITIONS Work locations are industrial and agricultural, primarily outdoors in the central valley of California. Temperatures range from 40 deg F in the winter to 115 deg F in the summer. Limited exposure to hazardous materials and/or toxic fumes will require the use of approved personal protective equipment. Regular exposure to heat, noise, flammable materials, rotating equipment, and other conditions normally encountered in an industrial environment should be expected. California Bioenergy will ensure all applicable work rules and safety requirements are closely adhered to. This position will require heavy lifting (<50 lbs.) and/or climbing ladder and/or stairs, bending squatting, and crawling in tight spaces to safely access work sites.

Job DescriptionDescription: Cognito Motorsports is a rapidly growing Truck, SUV & UTV aftermarket product manufacturing company based in Bakersfield, California. We are seeking a qualified Mechanical Design Engineer to join our team who possesses the capabilities and experience required to develop complex designs into high-quality manufacturable products. Essential Duties and Responsibilities: Project manage the evolution of product concepts through all phases of development, including design, prototyping, fitting, testing and manufacturing. Reviews product design for compliance with engineering principles, company standards and customer contract requirements, and related specifications. Sketches rough layouts and computes angles, weights, surface areas, dimensions, radii, clearances, tolerances, leverages and location of holes. Analyzes engineering drawings, specifications and related data to determine design factors such as dimensions, shape, load capacities, arrangement of parts and duty life cycles. Uses computer assisted design/drafting equipment and software to develop designs. Evaluates and approves design changes, specifications and drawing releases. Follows PDM procedures for the organization, management and storage of all engineering data. Measures fixtures and parts during production to ensure tolerances and specification compliance. Provides production support to machining, welding, fabrication and assembly departments. Assists with installation instruction development, including scripting, technical content and composition. Prepares weekly project status and disposition reports for Engineering management review. Maintain organized and clean department work areas. Perform additional duties as assigned by supervisors and management. Maintain compliance with all company policies and procedures described in the Employee Handbook. Perform ad hoc duties as assigned. Requirements: • BS degree in Engineering, • Hands-on experience with computer-aided engineering (CAE) and computer-aided manufacturing (CAM), • Experienced with 2D or 3D engineering design and manufacturing tools (e.g., SolidWorks, AutoCAD, ProE or other);, • Technical writing skills;, • High level of numeracy and technical competency, with an understanding of the applications used within design and production;, • Ability to analyze and interpret data to help with problem-solving;, • Excellent verbal and written communication skills, including ability to effectively communicate with teammates, contractors and vendors;, • Genuine interest in automotive performance, powersports, vehicle customization, or motor racing a big plus;, • Must be able to work under pressure and meet deadlines, while maintaining a positive attitude and providing exemplary teamwork toward the achievement of company goals.

Job DescriptionWhat is it for you: A multi-disciplined consulting firm specializing in Geotechnical, Environmental, and Forensic Engineering. Provides expertise in Engineering Geology, Construction Inspection, and Materials Testing. Staff includes engineers, geologists, environmental assessors, scientists, and construction inspection professionals. Offers long-term stability, career growth, and a collaborative work culture. Stable, growing company with tremendous opportunity for career advancement Competitive compensation and benefitsWhat You Will Be Doing Perform field investigations for geotechnical projects under senior guidance. Schedule and execute field work: drilling, sampling, reconnaissance, soil/rock logging. Conduct engineering analyses using hand calculations and computer-based tools. Perform construction observation services under senior direction: Observe/document geotechnical construction activities. Conduct in-situ density testing of engineered fill. Perform testing and observation for various geotechnical construction tasks. Conduct Special Inspections as required by local jurisdictions. Assist in preparing technical reports: Write sections, prepare tables/figures, coordinate with drafting teams. Engage in geotechnical engineering assessments and designs such as: Shallow & deep foundations Earth retaining structures Liquefaction and geotechnical hazard evaluations Dams, tunnels, roads, grading, slope stability, etc. Perform analyses including: Slope stability Liquefaction potential Allowable bearing capacity Foundation settlement Pile foundation design Perform other engineering duties as assigned. Experience You Will Need Experience with Aggregates, Asphalt, Concrete, Soils (ASTM, C-DOT procedures) Experience with Special Inspections and Material Testing (ICC Certificate in Soils, Masonry, Reinforced Concrete, and Structural Steel and Bolting) is highly valued. Solid understanding of soil mechanics. Quick learner, enthusiastic, proactive, and responsive. Bachelor’s degree in Civil Engineering. Willingness to travel and work in different site conditions. Competency in MS Office (Word, Excel, PowerPoint). Clean driving record. Ability to understand task objectives and how they relate to overall project goals. Experience as an Engineer in Training (EIT) or Professional Engineer (PE). Nice-to-Have Skills ICC Certifications (Soils, Masonry, Reinforced Concrete, Structural Steel & Bolting) Experience with Special Inspections Technical report writing experience Exposure to pipelines, mining, transportation, land development, solid waste projects

Job Description BKF is a multi-service infrastructure consulting firm providing civil engineering and surveying services across California, the Pacific Northwest, and beyond. With offices throughout California and the Portland area, BKF has served transportation, water resources, land development, government, and federal clients for over 110 years. At BKF, you’ll find a unique opportunity to grow your career with intention. Our culture values professional autonomy, innovation, and meaningful collaboration across offices. We are proud to be recognized with the Great Place to Work certification for the second year in a row. The Project Engineer on the Bridges & Structures team supports the delivery of bridge and transportation structure projects across California by contributing to coordinated structural solutions that meet agency requirements, project constraints, and constructability needs from design through construction. We are seeking three Bridges & Structures engineers to support projects in the Northern California, Central California, and Southern California regions. Responsibilities • Design and coordination of bridge and structural engineering projects, including highway and rail bridges, overpasses, underpasses, retaining walls, culverts, sound walls, and other transportation-related structures, • Preparation of structural design plans, details, calculations, and specifications in compliance with Caltrans, AASHTO, local agency, and seismic design standards, • Development of structural analysis and load rating calculations for new and existing bridge structures, including rehabilitation and retrofit projects, • Design of foundations and substructures such as piles, drilled shafts, footings, abutments, and piers, considering geotechnical and seismic requirements, • Preparation of structural quantity takeoffs, engineer’s estimates, and construction cost evaluations for bridge and structure projects, • Coordination with roadway, geotechnical, drainage, utility, and construction engineering teams to ensure integrated and constructible designs, • Preparation of technical reports, structural assessments, feasibility studies, and alternatives analyses to support bridge and structural projects, • Application of Federal, State, City, and County codes, including permitting, seismic safety, and regulatory requirements for bridge and structural design, • Review of shop drawings, RFIs, and construction submittals to ensure conformance with design intent and project specifications, • Minimum of 3+ years of experience in bridge and structural engineering, including the design and analysis of highway structures such as bridges, overpasses, retaining walls, culverts, and associated structural elements, • Bachelor’s degree in Civil Engineering, Structural Engineering, or a related field from an ABET-accredited program, • Proficiency in AutoCAD Civil 3D and other similar design software, • Engineer-in-Training (EIT) certification highly preferred; candidates with E.I.T. or Professional Engineer (P.E.) licensure will be prioritized, • Strong written and verbal communication skills, with the ability to work effectively in a collaborative environment Work Conditions: Exposure to constant or intermittent sounds at a low or moderate level consistent with an office setting. Exposure to high-stress, fast-paced, deadline-oriented environment. Travel to other BKF locations and client sites may be required. Benefits • The typical base salary range for this position is $99,000.00 - $135,00.00, annualized depending upon skills, experience, education, and geographical location. This is a salary position paid biweekly., • Competitive salaries, end of year bonuses, profit sharing, and 401k., • BKF pays 100% of the premiums for medical, dental, and vision coverage and 50% for your dependents., • Generous vacation and sick time packages., • 8 Paid Holidays., • Flexible schedules., • Education reimbursement, Paid annual dues for professional and societal organizations. BKF Engineers does not accept unsolicited resumes from recruiters or employment agencies. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement and a specific solicitation for the position or other approved engagement request for the position with BKF Engineers, BKF Engineers reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited submittals are done at the risk of the recruiter. #LI-Hybrid

Job DescriptionYou’ve Never Been Satisfied with "Good Enough." You want to make an impact, not just manage projects, but change how the world gets built. At Accenture Infrastructure & Capital Projects, you’ll do exactly that. You’ll help develop and deliver the factories, grids, transit systems, and public infrastructure that keep communities moving - and do it smarter, safer, and more sustainably than ever before. You’ll work alongside people who think big and act bold - project managers, engineers, technologists, and strategists who blend real-world experience with digital innovation and AI. Together, we’re transforming how capital projects are planned, managed, and executed, creating a better way to build for the future. Because “good enough” builds the past. You’re here to build what’s next, on a team that outperforms every norm. Visit us here to learn more about Accenture Infrastructure & Capital Projects THE WORK: • You’ll join our talent pipeline for upcoming projects and future opportunities in the Transportation sector., • You’ll bring your experience, passion, and readiness to make an impact—and we’ll keep you in mind as new roles open up., • You’ll just need to apply and provide your project list to get started., • You’ll provide inspection and quality assurance on highway and roadway construction projects for upcoming efforts., • You’ll determine if completed work follows the plans and specifications., • You’ll coordinate work with the contractor and various public utilities agencies., • You’ll maintain the records and reports related to the project., • You’ll coordinate directly with the general contractor and negotiate change orders., • You’ll assist in inspections to assure compliance with contract plans, specifications, and special provisions on all phases of structural construction such as bridges, foundations, walls, falsework, shoring, and drainage structures., • You’ll make or support grade, alignment, quantity, falsework, and shoring calculations., • You’ll assist in the preparation of contract change orders, contract estimates, progress pay estimates, and other documents or reports required for the project. Coordinate the sampling and testing of construction materials to monitor compliance with contract specifications., • You’ll monitor and track contractor progress, prepare daily, weekly, and monthly reports as required., • You’ll coordinate with the project team, as well as the Construction Staking and Material Testing CMCs., • Onsite at client site: The work location for this role is onsite with our clients and partners to enable delivery and cultivate our client relationships., • With all our roles, there is some in-person time for collaboration, learning and building relationships with clients, peers, leaders and communities. As an employer, we will be as flexible as possible to support your specific work/life needs.HERE’S WHAT YOU’LL NEED:, • Must be a licensed Professional Engineer in the State of California, • Minimum 1 construction highway project for or on Caltrans, • Minimum 8 years’ experience conducting roadway and highway construction inspection in major public works projects, • Minimum 3 years’ experience with stress analysis, structural mechanics, and strength of materials, • Minimum 3 years’ experience with physical characteristics and properties of various roadway and bridge construction materials including concrete and steelBONUS POINTS IF YOU HAVE:, • Ability to work independently, • Ability to perform duties in the construction field office and effectively make decisions concerning construction work in progress and solving field problems, • Ability to direct the efforts of subordinate inspectors

Job Description THE ROLE: • This position will report to the: Engineering Director, • Travel Requirement: None, • Location: Bakersfield, CA, • FLSA Status: Exempt, • Employment Category: Full-Time Regular, • Pay Range: $130,000 - $150,000 Generous Brands is dedicated to inspiring people to thrive through the power of vibrant nutrition through its leading brands, Bolthouse Farms, Health-Ade, and Evolution Fresh. Generous Brands partners with SAMBAZON to manufacture, distribute and sell SAMBAZON branded beverages. Bolthouse Farms is a pre-eminent provider of chilled juice, smoothies, shakes, and protein drinks. Health-Ade is the fastest growing kombucha brand, dedicated to creating bubbly beverages that boost gut health. Evolution Fresh is a premier cold-pressed juice brand with national availability. And, SAMBAZON beverages bottle the superfruit power of açaí in juice and natural energy cans. The company operates its North American business from facilities in Southern California, and the Greater Chicago Area. To learn more, please visit . WHAT YOU’LL BE RESPONSIBLE FOR IN THIS ROLE The Sr. Plant Engineer is a key technical leader responsible for driving engineering excellence, improving plant performance, and leading capital projects across the facility. This role enhances manufacturing reliability, safety, and efficiency through strong problem-solving, data-driven decision-making, and effective cross-functional collaboration. The Sr. Plant Engineer works closely with Operations, Maintenance, Quality, and Leadership to strengthen equipment performance, identify improvement opportunities, and deliver engineering solutions that support long-term business growth. Responsibilities include full ownership of capital projects from concept through commissioning and ensuring smooth integration into daily operations. This role is ideal for an engineer who thrives in a fast-paced environment, takes ownership, and is motivated by improving systems and delivering high-impact results. JOB DUTIES: • Technological Assessment: Evaluate engineering technologies and process improvements to optimize operational performance., • Technical Integration: Apply engineering principles and manufacturing technologies to resolve technical challenges and support stable, efficient production., • Risk and Benefit Analysis: Conduct cost-benefit evaluations and risk assessments to recommend improvements aligned with operational and corporate priorities., • Capital Project Leadership & Execution: Lead and execute capital projects from concept through commissioning, including scope definition, budgeting, design reviews, procurement, vendor and contractor coordination, installation oversight, and system startup/handoff. Manage large projects independently and support larger strategic initiatives. Ensure all projects are delivered safely, on time, within budget, and in alignment with operational goals., • Plant Support: Provide daily technical support, troubleshoot equipment issues, and implement engineering solutions that improve uptime, capability, and efficiency., • Data Understanding and Analysis: Analyze production data to identify trends, performance gaps, and opportunities for process or equipment optimization., • Preventive Maintenance: Partner with Maintenance and Operations to enhance preventive and predictive maintenance practices that improve equipment reliability., • Root Cause Analysis: Lead structured root cause investigations to eliminate recurring failures and implement corrective actions., • Team Building&Support: Partner across departments, support structured problem-solving efforts, and mentor team members to strengthen technical capability REQUIRED SKILLS AND ABILITIES: • Leadership: Ability to effectively lead, coach, and mentor teams., • Communication: Excellent verbal and written communication skills., • Technical Expertise: Advanced understanding of engineering principles applicable to food, beverage, or industrial manufacturing., • Project Management: Demonstrated success leading and completing capital projects from concept through commissioning., • Continuous Improvement: Dedicated to the principles of continuous improvement., • Technical Drawing: Proficient in AutoCAD, SolidWorks, or equivalent design software., • Problem-Solving: Strong analytical and troubleshooting abilities in fast-paced environments. MINIMUM QUALIFICATIONS: • BS Degree in Electrical, Mechanical Chemical, or Process Engineering., • 5+ years of experience in food, beverage, CPG, or industrial manufacturing, • 5+ years of capital project experience (concept → commissioning), • Experience leading cross-functional teams and supervising contractors, • Proven experience with reliability engineering, utilities, or manufacturing automation PREFERRED QUALIFICATIONS: • Certification in Six Sigma or similar quality improvement methodologies., • Experience with energy management, utilities optimization, or controls/automation, • Background in high-speed packaging or process systems PHYSICAL DEMANDS & ENVIRONMENTAL HAZARDS: • Up to 20% travel may be required., • Must be able to work in a cold storage environment as needed HOURS & WORKDAYS: • Primarily 1st shift (7:30am–4:00pm)., • Flexibility required for occasional off-shift work (early mornings, evenings, or weekends) during key project phases. WHAT WE OFFER plus more! Our rich benefits packages are designed to support the health and well-being of both our eligible team members and families. • Medical, Dental & Vision, • Group Life and AD&D, • Voluntary Life and AD&D, • Group Short & Long-Term Disability, • 401(k), • Paid Time Off, • Flexible Spending Accounts, • Employee Assistance Program, • Gym Membership Discounts EQUAL EMPLOYMENT OPPORTUNITY We are an equal opportunity employer committed to fostering a culturally diverse organization. We strive for inclusiveness and a workplace where mutual respect is paramount. We encourage applications from a diverse pool of candidates, and all qualified applicants will receive consideration for employment without regard to race, color, ethnicity, religion, sex, age, national origin, disability, sexual orientation, gender identity and expression, or veteran status. We will provide reasonable accommodation for qualified individuals with disabilities, as needed, to assist them in performing essential job functions. REASONABLE ACCOMMODATIONS Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. If you are interested in applying for employment with Generous Brands and need special assistance to apply for a posted position, or if you believe you do not meet any of the required qualifications of a posted position due to a protected disability and would like to explore the possibility of an accommodation, please contact our Talent Acquisition team at . RECRUITMENT AGENCIES: Generous Brands does not accept unsolicited agency resumes. Generous Brands is not responsible for any fees related to unsolicited resumes. #GenerousBrands #LI-YX1 1st Shift 7:30am -4:00pm

The Project Engineer will play a key role in coordinating project documentation, supporting field and office teams, and ensuring projects progress smoothly from preconstruction through closeout. We are seeking a motivated Project Engineer to support both ground-up & rehab and multi-family residentia

The ideal candidate will be responsible for assisting the project manager and project team with project documentation and control, job cost accounting, scheduling, and construction supervision efforts. Assist with on-site management to ensure project success. Ensure project plan is moving forward to

The Project Engineer will play a key role in coordinating project documentation, supporting field and office teams, and ensuring projects progress smoothly from preconstruction through closeout. We are seeking a motivated Project Engineer to support both ground-up & rehab and multi-family residentia

The ideal candidate will be responsible for assisting the project manager and project team with project documentation and control, job cost accounting, scheduling, and construction supervision efforts. Assist with on-site management to ensure project success. Ensure project plan is moving forward to

We care far more about what you’ve built than where you studied - academic credentials are a bonus, but your code and projects matter most.

Key Responsibilities Coordinate daily field activities for marine/heavy civil construction projects Support superintendents and foremen with labor, equipment, and material planning Track production quantities, equipment usage, and progress reporting Enforce OSHA, MSHA, USACE, and EM 385-1-1 safety a

Key Responsibilities Manage submittals, RFIs, and change orders (PCOs) Oversee subcontractor coordination and procurement tracking Support project startup and development of project-specific workplans Assist the Superintendent with weekly short-term scheduling to maximize efficiency Attend and activ

Minimum 5 years of combined experience in roles such as Field Engineer, Project Engineer, Project Superintendent, Construction Manager, or Project Manager on marine construction or heavy civil construction projects. The Project Engineer will support marine construction projects, focusing on daily fi

Project Engineer san diego Project Engineer located in San Diego, CA. Essential Duties & Responsibilities: Provides technical and engineering support to the College Project Teams (CPT) including Project Managers and Construction Managers. Demonstrate an understanding of how project documentation imp

Minimum 5 years of combined experience in roles such as Field Engineer, Project Engineer, Project Superintendent, Construction Manager, or Project Manager on marine construction or heavy civil construction projects. The Project Engineer will support marine construction projects, focusing on daily fi

Key Responsibilities Coordinate daily field activities for marine/heavy civil construction projects Support superintendents and foremen with labor, equipment, and material planning Track production quantities, equipment usage, and progress reporting Enforce OSHA, MSHA, USACE, and EM 385-1-1 safety a