Trabajos project engineer en Clifton, New JerseyCrear alertas

Job DescriptionQuality Control Microbiology Engineer(s) I, II, III Quality Control Microbiology Engineer I The “Quality Control (QC) Microbiology Engineer I” will support two local sites serving as a support role to clinical and/or commercial production. The QC Microbiology Engineer will perform microbiological testing including, but not limited to, growth promotion, microbial identification, sterility testing, Gram stain, and endotoxin. Under the direction of the Associate Manager of QC Microbiology, responsibilities of the QC Microbiology Engineer I will include but are not limited to: Microbiological Testing: • Growth Promotion, • Microbial Identification, • Sterility Testing, • Gram Stain, • EndotoxinEquipment Monitoring:, • Ensure equipment is in proper working conditions, • Ensure all equipment is properly maintained/calibrated, • Shipping of test samples and equipment to contract laboratories for testing, • Complete all documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP).REQUIREMENTS, • Associates degree in a science or relevant field required, • Training in GxP/ GDP, Safety, • Minimum 0-2 years of experience or equivalent experience., • Microbiology testing or within the biopharmaceutical industry experience preferred., • Proficient with computer software; Microsoft Office, • Strong written and oral communication skills, • Must be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilities, • Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, liquid nitrogen and noise levels, • Must be able to work during the weekend, holidays and as required by the company, • Duties, responsibilities, and activities may change at any time with or without notice.QC Microbiology Engineer II The Quality Control Microbiology Engineer II will support two local sites serving as a support role to clinical and commercial production. The QC Microbiology Engineer II will perform microbiological testing including, but not limited to, growth promotion, microbial identification, sterility testing, Gram stain, and endotoxin. Under the direction of the Associate Manager of Microbiology, responsibilities of the QC Microbiology Engineer II will include but are not limited to: Microbiological Testing:, • Growth Promotion, • Microbial Identification, • Sterility Testing, • Gram Stain, • EndotoxinEquipment Monitoring:, • Ensure equipment is in proper working conditions, • Ensure all equipment is properly maintained/calibrated, • Shipping of test samples and equipment to contract laboratories for testing, • Produce documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP)., • Writing/conducting investigations pertaining to microbiological testing, • Develop and train QC Microbiology Engineer I personnel on relevant business processesREQUIREMENTS, • BA/BS in a science or relevant field required or equivalent experience, • Minimum 2-4 years of experience with microbiological testing or within the biopharmaceutical industry., • Training in GxP/GDP, Safety, • Proficient with computer software such as; Microsoft Office, • MODA/LIMS, • Familiarity with ISO and EU standards, • Strong written and oral communication skills, • Technical writing skills, • Technical training ability, • Must be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilities, • Supervisory Responsibility, • Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, liquid nitrogen and noise levels., • Employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens., • Must have the ability to work in a team-oriented environment and with clients, • Must be able to work during the weekend, holidays, and as required by the company, • Occasionally personal protective equipment may be required including lab coat, latex gloves, safety glasses and/or respirator., • Duties, responsibilities, and activities may change at any time with or without notice.QC Microbiology Engineer III The Quality Control Microbiology Engineer III will support two local sites. Serving as a support role to clinical and/or commercial production. The QC Microbiology Engineer III will coordinate data for batch release, participate in project/client meetings, and author/revise microbiological testing procedures. Additionally, the incumbent will perform microbiological testing including, but not limited to, growth promotion, microbial identification, sterility testing, Gram stain, and endotoxin. Under the direction of the Associate Manager of Microbiology, responsibilities of the QC Microbiology Engineer III will include but are not limited to:, • Documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP)., • Coordinates microbiological testing data for batch release, • Participation in project/client meetings and communications, providing scientific and technical expertise, • Authoring/revising Standard Operating Procedures, Work Instructions, Forms, and Protocols, • Review of investigations and documentation of non-confirming events and environmental excursions., • Apply expertise of compliance requirements to maintain an inspection-ready state., • Participate and act as subject matter expert during audits/inspections, • Develop and train QC Microbiology Engineer II on relevant business processes, • Processing of purchase orders for outsourced testing and lab supplies, • Coordinates work orders, • Other duties as assignedREQUIREMENTS, • BA/BS in a science or relevant field required or equivalent experience, • Minimum 5-7 years of experience with environmental monitoring or within the biopharmaceutical industry, • Minimum required training; GxP/GDP Training, Safety Training, • Proficient with computer software such as; Microsoft Office, MODA/LIMS; Microsoft Visio (preferred); Netsuite (preferred); Maximo Asset Management System (preferred), • Proficient knowledge of ISO and EU standards, • Strong knowledge of quality systems and ability to interpret Quality standards for implementation and review., • Strong written and oral communication skills, • Strong technical writing skills, • Technical training experience, • Must be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilities, • Supervisory Responsibility; Direct reports, • While performing the duties of this job, the employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens., • Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, liquid nitrogen and noise levels., • Must have the ability to work in a team-oriented environment and with clients., • Must be able to work during the weekend, holidays and as required by the company

Job Description POSITION SUMMARY: RVE is seeking a water / wastewater inspector with experience in the field of water and sewer construction. The ideal candidate should be familiar with gravity sanitary main, sanitary force main, pump station and wastewater treatment plant components and operation. The individual should also be versed in water main installation, water supply distribution systems and the components and operation of water treatment plants. The individual may also inspect storm sewer systems and roadway construction. The candidate should have a minimum of 5 years’ experience in this field. They will provide construction observation and project management services for municipal and county agencies. PRIMARY DUTIES: • Perform constructability and plan reviews prior to construction. Interact with the design engineer with input before the project goes out to bid., • Perform construction management services for projects that consist of water supply and sanitary distribution systems. Including work in water and wastewater plants. Ensure the job site is maintained in a safe, neat, and orderly fashion by the contractor., • Provide inspection of contractors work to ensure that the work is being performed as per plans and specifications and regulatory requirements. Communicate with the project manager daily about the progress on the project. Keep the client informed of the project’s progress., • Attending and running pre-construction & weekly progress meetings with the client and contractor and give input on issues that arise during construction. Follow through with RFIs to maintain the project runs as scheduled and communicate with Engineering Team., • Conduct on-site observations of the work in progress to assist Engineer in determining if the Work is proceeding in accordance with the Contract Documents, both alone and/or as part of a team., • Keep a diary or logbook of all observations and daily activities for ongoing work and provide Engineer with daily reports to include all labor trades and equipment supplied by Contractor., • Review applications for payment with Contractor and confer with Engineer on recommendations for progress payments., • Be knowledgeable of NJDEP procedures and requirements for management of a project., • Perform field testing of materials installed and start-up and acceptance of equipment., • Prepare a final punch list at substantial completion and perform final project review for project closeout., • Construction and building inspectors examine worksites, both alone and as part of a team. Some inspectors climb ladders or crawl in tight spaces. Most work full time during regular business hours. KNOWLEDGE, SKILLS, and ABILITIES: • Applicant must have demonstrated experience in water/wastewater inspections., • Good communication skills, with the ability to work with others and the public, • Self-motivated, organized, and focused, with good attention to detail EDUCATION/EXPERIENCE: • Minimum of 5 years of construction observation or construction experience directly related to one of the following disciplines: water supply and distribution systems, sanitary sewer collection and water / wastewater treatment systems, and roadway construction., • High School diploma or equivalent, • Must have computer literacy in Microsoft Office and Microsoft outlook. CERTIFICATIONS/LICENSES REQUIRED • Valid Driver’s License, • NICET Certification a plus, • Traffic Control Coordinator, • NICET – Highway Construction, • ACI - Field Technician Certification, • New Jersey Society of Asphalt Technicians - Field Testing, • NJDOT - Traffic Control Coordinator, • NACE - CIP Level 1, • OSHA - 10/30, • NASSCO - Pipe Assessment, • Confined Space Training SUPERVISORY RESPONSIBILITY This position has no supervision responsibilities. The annual base salary range for this full-time position in the United States is $55,000 - $82,500. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins.

Job Description T&M Associates is seeking an experienced Inspector to serve as Resident Engineer on Municipal, County and Agency infrastructure projects throughout New Jersey. This position offers a unique opportunity to lead high-impact projects, including roadways, bridges, water and sewer systems, and municipal facilities. Responsibilities: • Lead and manage the inspection and quality assurance of complex transportation and infrastructure projects, ensuring compliance with project plans, specifications, safety standards, and permit requirements., • Supervise and mentor a team of inspectors while coordinating daily construction observation activities, including field testing, commissioning, and schedule verification., • Serve as the primary liaison between clients, contractors, regulatory agencies, and project stakeholders, fostering strong communication and resolving project-related issues efficiently., • Perform Resident Engineer and Project Manager-level duties, including oversight of construction schedules, staffing reports, payroll certifications, and labor documentation., • Review and coordinate contractor submittals, RFIs, shop drawings, and maintain detailed inspection records and reports., • Ensure contractor compliance with safety plans, environmental permits, and all applicable regulations while minimizing public disruptions and coordinating with adjacent projects., • Support budget and schedule management by identifying and solving complex field challenges in collaboration with the project team (Owner, T&M, and Contractors)., • Bachelor’s degree in Civil Engineering or a related field preferred., • Minimum of 10 years of experience in construction inspection or a related field, with significant experience on County and Agency projects, including NJDOT, NJTA, NJT, etc., • Required certifications include: NICET Level III or IV in Highway Construction or equivalent, NJSAT, ACI and TCC certification. Ability to obtain any required certifications within 6 months is acceptable., • Bridge construction inspection experience (rehab & new) a plus, • Knowledge of NJDOT and NJTA standards, procedures and software., • Excellent written and verbal communication skills. T&M Associates offers a competitive and comprehensive benefits package designed to support the health, well-being, and professional growth of our employees. Benefits include comprehensive insurance (medical, dental and vision), a 401(k) with company match, paid time off, flexible work schedules, wellness programs, and professional development opportunities — all within a people-first, award-winning hybrid work environment. See more details about benefits here. If this sounds like a company you want to be part of then apply now! New Hires must have documents indicating they are eligible to work in the United States. EEO/AA Employer. For California based applicants, our CCPA-CRPA Privacy Notice can be found on our Careers page at #LI-ONSITE

Job DescriptionQuality Control Microbiology Engineer III Lynkx Staffing LLC specializes in placing talented professionals in the Biotechnology, Pharmaceutical and Medical Device, IT and Human Resources disciplines in New Jersey. The Quality Control Microbiology Engineer III will support two local sites. Serving as a support role to clinical and/or commercial production. The QC Microbiology Engineer III will coordinate data for batch release, participate in project/client meetings, and author/revise microbiological testing procedures. Additionally, the incumbent will perform microbiological testing including, but not limited to, growth promotion, microbial identification, sterility testing, Gram stain, and endotoxin. Under the direction of the Associate Manager of Microbiology, responsibilities of the • Documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP)., • Coordinates microbiological testing data for batch release, • Participation in project/client meetings and communications, providing scientific and technical expertise, • Authoring/revising Standard Operating Procedures, Work Instructions, Forms, and Protocols, • Review of investigations and documentation of non-confirming events and environmental excursions., • Apply expertise of compliance requirements to maintain an inspection-ready state., • Participate and act as subject matter expert during audits/inspections, • Develop and train QC Microbiology Engineer II on relevant business processes, • Processing of purchase orders for outsourced testing and lab supplies, • Coordinates work orders, • Other duties as assignedREQUIREMENTS, • BA/BS in a science or relevant field required or equivalent experience, • Minimum 5-7 years of experience with environmental monitoring or within the biopharmaceutical industry, • Minimum required training; GxP/GDP Training, Safety Training, • Proficient with computer software such as; Microsoft Office, MODA/LIMS; Microsoft Visio (preferred); Netsuite (preferred); Maximo Asset Management System (preferred), • Proficient knowledge of ISO and EU standards, • Strong knowledge of quality systems and ability to interpret Quality standards for implementation and review., • Strong written and oral communication skills, • Strong technical writing skills, • Technical training experienceMust be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilitiesSupervisory Responsibility; Direct reportsWhile performing the duties of this job, the employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens.Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, liquid nitrogen and noise levels.Must have the ability to work in a team-oriented environment and with clients.Must be able to work during the weekend, holidays and as required by the company.Working EnvironmentWhile performing the duties of this job, the employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens.Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, and liquid nitrogen.Other exposures may include gases (nitrogen), or corrosive chemicals (Clorox, potassium hydroxide), or exposure to liquid nitrogen. The noise level in the work environment is moderately noisy.Must have the ability to work in a team-oriented environment and with clientsMust be able to work during the weekend, holidays and as required by the companyMust be able to handle the standard/moderate noise of the manufacturing facility Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

POSITION SUMMARY: Remington & Vernick Engineers is looking for a NICET Certified Professional (or equivalent) with expertise in inspecting heavy highway, intersection improvements, and bridge rehabilitation/reconstruction projects. This professional will assist in the project record keeping, measuring and tracking daily quantities as constructed, and generating daily inspection reports. This individual is expected to have an extensive background in construction inspection with clients such as local County government agencies, NJDOT, the NJTA, DRPA, and DRJTBC. PRIMARY DUTIES: • Act in the capacity of Lead Inspector to conduct construction supervision and field inspection of the work in progress to determine if the work is proceeding in accordance with the Contract Documents, both alone and/or as part of a team., • Work collaboratively with other engineers, professionals, and infrastructure authorities on Federal, State, regional, and local improvement projects., • Work with clients to inform the public about upcoming work and potential impacts. Work with the contractor to minimize disruptions to the public., • Provide and maintain all records related to the project in question including daily quantities., • Possess strong communication, computer, and writing skills and be experienced with the review and comprehension of CPM Schedules, • Support the Project Manager / Resident Engineer with all project submittals and requests for information, ensuring the proper Engineer performs the necessary review and/or guidance., • Keep a logbook of all observations and daily activities for ongoing work and provide the client with daily reports to include all labor trades, equipment supplied by Contractor, and measured pay quantities., • Review applications for payment with Contractor and make recommendations for progress payments to the Client., • Prepare a final punch list at substantial completion and perform final project review for project closeout., • Perform additional responsibilities as required by project and business needs. KNOWLEDGE, SKILLS and ABILITIES: • Good communication skills, with the ability to work with others and the public., • Self-motivated, organized, and focused, with good attention to detail. EDUCATION/EXPERIENCE: • High School diploma or equivalent, • Minimum of 5 years of experience with 2+ years of experience on projects $5M or greater, • Experienced on bridge, and highway construction projects, • Must be familiar with NJDOT specifications and documentation practices., • Possess a combination of NJ County, NJDOT, NJTA, DPRA, and DRJTBC experience Certifications/Licenses Required • Valid Driver’s License, • NICET 2+ Highway Construction Inspection or equivalent required, • ACI-Concrete Field Testing Technician, • NJSAT Asphalt Paving Construction Technologist, • Rutgers TCC certification SUPERVISORY RESPONSIBILITY This position has some supervisory responsibility. PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee works primarily in the field and may be exposed to outside weather conditions. Work requires full range of motion and ambulation, climbing ladders or crawling in tight spaces. Requires technology and computer use to file project, time, and expense reports. May occasionally require lifting up to 25 pounds. Travel to worksites and regional offices worksites will be required. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $68,000 - $102,000. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary. We are an at will employer.

Job Title: Geotechnical Project Engineer - Design Focused (Remote) Location: Fully Remote (U.S.-based candidates) Employment Type: Full-Time Overview: A dynamic and growing engineering consultancy is seeking a Geotechnical Project Engineer to support design-driven geotechnical projects across a variety of sectors. This fully remote role is ideal for a technically strong engineer who enjoys working independently and collaboratively on complex design challenges. The position offers flexibility, autonomy, and the opportunity to contribute to high-impact infrastructure and development projects nationwide. Key Responsibilities: • Perform geotechnical design and analysis for foundations, retaining structures, slope stability, and ground improvement., • Develop geotechnical reports, design calculations, and construction recommendations., • Collaborate with multidisciplinary teams including structural, civil, and environmental engineers., • Review subsurface investigation data and interpret geotechnical parameters for design., • Support project managers with technical input and coordination across project phases., • Bachelor's or Master's degree in Civil or Geotechnical Engineering., • 4+ years of geotechnical engineering experience with a strong design portfolio., • PE license or EIT working toward licensure., • Proficiency in geotechnical software (e.g., LPILE, Slope/W, PLAXIS, gINT)., • Strong written and verbal communication skills., • Competitive compensation and benefits., • Fully remote work with flexible hours., • Opportunity to work on diverse and technically challenging projects., • Supportive and collaborative team culture., • Professional development and growth opportunities.

Job Summary: We are seeking a highly experienced and innovative Senior Mechanical Engineer to drive the development of advanced electro-pneumatic and mechanical systems. The ideal candidate will apply deep mechanical engineering expertise, lead complex design and re-design projects, and provide technical guidance to cross-functional teams and junior engineers. Key Responsibilities: Apply subject matter expertise in mechanical design, analysis, and system development. Conceive and implement solutions to complex pneumatic, mechanical, and electrical design challenges. Establish design objectives and contribute to writing specifications and comprehensive engineering reports. Review and develop detailed product specifications. Conduct conceptual and detailed design studies using MCAD, SolidWorks, and other engineering tools. Collaborate with multidisciplinary teams throughout the design and development process. Develop prototype hardware in coordination with internal manufacturing and external vendors. Conduct rigorous testing to verify compliance with performance, safety, regulatory, and environmental requirements. Apply Design for Manufacturability and Assembly (DFM&A) principles to product designs. Generate and maintain detailed engineering documentation supporting the product development lifecycle. Serve as a technical mentor and project lead, providing guidance to junior engineers and managing small to medium-sized projects. Technical Expertise / Skills: Advanced proficiency in SolidWorks CAD, MCAD/CAE tools, Microsoft Office Suite, Microsoft Visio, Microsoft Project, and Adobe Acrobat. Strong background in materials and manufacturing methods, including: Injection molding Plastic extrusion Metal casting, stamping, and machining Additive manufacturing Familiarity with ANSI/ISO dimensioning and drafting standards, including GD&T. Experience with mechanical testing, measurement equipment, and statistical analysis of test data. Understanding of regulatory requirements and document control systems, especially within medical device environments. Knowledge of FDA, IEC, and UL standards for medical electronic equipment. Capable of thermal, structural, and vibration analysis. Skilled in mechanism design, analytical reasoning, and creative problem-solving. Ability to operate lab and shop equipment (e.g., drill press, lathe, milling machine, oscilloscopes, DVMs, environmental chambers). Experience with database and document management systems. Minimum Qualifications: BSME or MSME required. Minimum of 10 years of progressive experience in mechanical design and product development. Proven experience leading technical sub-projects and mentoring engineers. Strong interpersonal, verbal, and written communication skills.

Job Summary: We are seeking a highly experienced and innovative Senior Mechanical Engineer to contribute to the development of advanced electropneumatic and mechanical systems. The ideal candidate will apply indepth knowledge of mechanical engineering principles, demonstrate leadership in complex design/redesign projects, and provide technical guidance to crossfunctional teams and junior engineers. Key Responsibilities: • Apply subject matter expertise in mechanical design, analysis, and system development., • Conceive and develop solutions to complex analytical, pneumatic, mechanical, and electrical design challenges., • Establish design objectives and contribute to writing specifications and comprehensive engineering reports., • Participate in the review and development of detailed product specifications., • Conduct conceptual and detailed design studies using MCAD, Solidworks, and other tools., • Collaborate with multidisciplinary engineering teams throughout the design and development process., • Develop prototype hardware in coordination with internal manufacturing and external vendors., • Conduct rigorous testing to verify compliance with performance, safety, regulatory, and environmental requirements., • Generate and maintain detailed engineering documentation to support the product development lifecycle., • Serve as a technical mentor and project lead, providing guidance and support to junior engineers and managing small to medium sized projects. Required Knowledge, Skills, and Abilities: • Expertise in Design for Manufacturability and Assembly (DFM&A) principles., • Proficient in SolidWorks CAD software; formal training preferred., • Strong background in materials and manufacturing methods including:, • Injection molding, • Plastic extrusion, • Metal casting, stamping, and machining, • Additive manufacturing, • Familiarity with ANSI/ISO dimensioning and drafting standards and GD&T., • Experience with mechanical testing and measurement equipment, and statistical analysis of test data., • Understanding of regulatory requirements and document control systems (especially within medical device environments)., • Experience in applying FDA, IEC, and UL standards for medical electronic equipment., • Capable of thermal, structural, and vibration analysis., • Demonstrated skill in mechanism design, analytical reasoning, and creative problem solving., • Strong interpersonal, verbal, and written communication skills., • Ability to operate lab and shop equipment (e.g., drill press, lathe, milling machine, oscilloscopes, DVMs, environmental chambers). Minimum Qualifications: • BSME or MSME required., • Minimum of 10 years of progressive experience in mechanical design and product development., • Proven experience leading technical subprojects and mentoring engineers., • Advanced proficiency with: SolidWorks, MCAD/CAE tools, Microsoft Office Suite, Microsoft Visio and Project, Adobe Acrobat, • Experience with database and document management systems.

Job Summary: We are seeking a highly experienced and innovative Senior Mechanical Engineer to contribute to the development of advanced electro-pneumatic and mechanical systems. The ideal candidate will apply in-depth knowledge of mechanical engineering principles, demonstrate leadership in complex design/re-design projects, and provide technical guidance to cross-functional teams and junior engineers. Key Responsibilities: • Apply subject matter expertise in mechanical design, analysis, and system development., • Conceive and develop solutions to complex analytical, pneumatic, mechanical, and electrical design challenges., • Establish design objectives and contribute to writing specifications and comprehensive engineering reports., • Participate in the review and development of detailed product specifications., • Conduct conceptual and detailed design studies using MCAD, Solidworks, and other tools., • Collaborate with multidisciplinary engineering teams throughout the design and development process., • Develop prototype hardware in coordination with internal manufacturing and external vendors., • Conduct rigorous testing to verify compliance with performance, safety, regulatory, and environmental requirements., • Generate and maintain detailed engineering documentation to support the product development lifecycle., • -Serve as a technical mentor and project lead, providing guidance and support to junior engineers and managing small to medium-sized projects. Required Knowledge, Skills, and Abilities: • Expertise in Design for Manufacturability and Assembly (DFM&A) principles., • Injection molding, • Plastic extrusion, • Metal casting, stamping, and machining, • Additive manufacturing, • Familiarity with ANSI/ISO dimensioning and drafting standards and GD&T., • Experience with mechanical testing and measurement equipment, and statistical analysis of test data., • Understanding of regulatory requirements and document control systems (especially within medical device environments)., • Experience in applying FDA, IEC, and UL standards for medical electronic equipment., • Capable of thermal, structural, and vibration analysis., • Demonstrated skill in mechanism design, analytical reasoning, and creative problem-solving., • Strong interpersonal, verbal, and written communication skills., • Ability to operate lab and shop equipment (e.g., drill press, lathe, milling machine, oscilloscopes, DVMs, environmental chambers). Minimum Qualifications: • BSME or MSME required., • Minimum of 10 years of progressive experience in mechanical design and product development., • Proven experience leading technical sub-projects and mentoring engineers., • Advanced proficiency with: SolidWorks, MCAD/CAE tools, Microsoft Office Suite, Microsoft Visio and Project, Adobe Acrobat, • Experience with database and document management systems.

Job Opportunity: Senior Project Manager 🏢 Location: West New York, NJ 🏢 Company: CPA Architecture 🌐 Website: About CPA Architecture CPA Architecture is a dynamic and collaborative design firm committed to delivering innovative architectural solutions. We are seeking a motivated and detail-oriented Senior Project Manager to join our team and contribute to a variety of exciting projects. Position Summary As a Senior Project Manager you will serve as a subject matter expert and team leader, guiding architectural staff through the design and documentation of large-scale, multifaceted projects. You will ensure compliance with zoning and building codes, manage project schedules and budgets, and maintain high standards of quality and client service. Subject matter expert on architectural principles and concepts. Provides guidance to the team on building systems, construction techniques, and structures. Leads the development of details and providing planning and design support in the preparation of Design Development and Construction Documents. Subject matter level knowledge of building codes and accessibility requirements, occupancy requirements, permitting processes & construction document production is required. Guide the firm with creating, implementing and constantly updating standards for the various phases. Hand-off Report of all zoning requirements, conditions of approval and any client’s desires or wishes discussed during SD’s Identity potential projects risks related to zoning issues. Ensure that all designs adhere to local zoning and building laws and regulations. Conduct Zoning analysis and site assessment to inform design decisions. Key Responsibilities · Primarily leads others in the development of design related tasks while also developing concepts for projects of the largest scale and complexity. · Leads and conducts material and product research for project development for projects of different scale. Reviews and approves research by others. · Oversees and review work of supporting architectural team members. Implement processes for quality assurance throughout the design phase. Review design documents for accuracy, completeness, and compliance with standards. Provides technical direction to assigned design staff and engineers. · Responsible for coordination and direction of single or multi-discipline teams and parties on assigned projects of large scale and complexity. · Strong analytical and creative problem-solving skills. Excellent verbal and written communication skills. · Selects, evaluates, and implements procedures and techniques used on projects. Works independently on architectural design projects and often coordinates project design efforts. Contribute to evolving and implementing design documentation standards and software tools. Constantly seeks knowledge and provides an environment that encourages innovation. Proactively takes lead in implementing into projects and design processes. · Delegate task effectively and monitor team performance. Guides the team on providing technical expertise and advises client on best solutions and recommendations in design. · When client requests are out of scope, identify and price additional services for review by Project Manager. · Develop and manage project schedules, budgets & allocation of hours. Guides the team in understanding the clients needs and analyzes constrains in project schedule, scope, and budget to add value through proposed solutions. · Ensure timely deliverable submissions to Clients and Permitting Entities. Monitor the project’s process. Maintains work plan for discipline. Monitors completion of team's deliverables against the project deadlines and the critical path. · Coordination with Attorney, Planner, Traffic, Civil engineer, MEP & Structural engineers as well as any other consultants involved in the project. Coordinate with internal teams and clients to ensure alignment on project goals. Can be relied upon to assist the Senior Architect in client presentations on technical & design solutions. Guides the team in leveraging knowledge of planning, design delivery, and construction completion to make informed recommendations to the client. · Assist the team with the design process starting from concepts & sketches to final design project. Create detailed plans for the construction project. Coordinate renderings for presentations, meetings, or public hearings. Lead the creation of schematic designs, ensuring they meet client requirements and zoning regulations as needed. Ensure project deliverables for the discipline are completed at the expected quality, and within budget and schedule. · Present design concepts, Testfit, Pro Forma & Presentations as needed. Prepares status updates on projects via reports and communicate to leadership, internal and/or external clients. · Internal and external communication with consultants for 3D Renderings as needed. · Directs jobsite visits, client meetings, and presentations. · Extensive, independent contact with clients, vendors' representatives, and any strategic partners. · Leverages professional network to engage locally with the industry on thought leadership. Participates and looks for opportunities to lead in professional organizations. · Actively contributes to professional networks to share relevant knowledge expected from the client. · Strong organization skills of proposals, change orders, general scope and details. · Prepare and submit required documentation for zoning applications as needed. · Responsible for developing new client business, and engaging in strategic planning for the department. · High Level Review of Architectural Design and code compliance. Responsible for the improvement of operations, increasing project efficiency and quality, and building a culture of delivering excellent client service. Leads continuous improvement efforts as requested by senior leadership. · Produce a set of comprehensive Schematic Documents independent from direct oversight from senior staff. Direct junior staff at different stages of the design process. Management Processes, Standards, and Implementation. Encourages a people first approach and entrepreneurial initiative in all staff. Guides the team in assessing risk management and business impact when implementing process improvement. · Ability to delegate and manage junior staff if required by the project. Possesses a desire for lifelong learning. Trains newly hired staff, and assists with the development of staff through day to day interactions. · Monitor project costs and ensure the projects stay within budget. Responsible for profitability on assigned projects. · Maintain Client Relationships. Builds relationship capital with clients through project work and networking events. Ensures team maintains quality of service on all assigned project. Qualifications · Bachelor’s or Master’s degree in Architecture from an accredited institution · 10+ years of architectural experience with proven leadership in complex projects · Subject matter expertise in building codes, accessibility, permitting, and construction documentation · Proficiency in Revit, AutoCAD, Bluebeam, Adobe Creative Suite, and Microsoft Office · Strong analytical, organizational, and communication skills · LEED accreditation is a plus; licensure pursuit encouraged · Authorized to work in the U.S. without visa restrictions · Demonstrates humility, active listening, and a team-first mindset Why Join Us? • Opportunity to work on diverse and impactful projects., • Shape the future of architectural standards and design excellence, • Work in a collaborative studio with a people-first culture, • Convenient location in West New York, NJ with opportunities for professional growth

Job Description Our client in Fairfield, NJ is looking for a Senior Product Release Engineer for a Full time position. Pay is $110-125k annually DOE Responsibilities: • Oversee all aspects of programs from concept definition through successful transfer to manufacturing, advocate for the customer and needs/requirements., • Provide leadership to cross-functional technical teams responsible for successful launch of multiple complex programs., • Responsible for overseeing the coordination and on-time/in-budget completion of all project tasks which may involve some or all of the following technologies: progressive stamping, insert molding, factory automation and other related tooling/processes., • Oversee the creation and distribution of project schedules. Ensure that project milestones and deadlines are met including assignment of responsibilities., • Facilitate design definition, design reviews, tooling kickoff, and project postmortem activities., • Understand and meet Regulatory (FDA) requirements and processes for development., • Advanced Product Quality Planning (APQP) including completion of related documentation, including but not limited to: DOE’s, FMEA’s, Process Flowcharts, Control Plans, Capability Studies and Gage R&R’s., • Bachelor’s degree in mechanical engineering or biomedical engineering., • Minimum of 10 years of medical device experience., • Experience in developing and implementing procedures, methods, and tools for the manufacture or design and testing of medical products., • Experience in contributing to technical and cross-functional teams in accomplishing projects with notable impact on company objectives.

Job DescriptionOur firm is seeking an Environmental Engineer to join our Northern New Jersey office. The job will consist of a variety of tasks, but candidates can expect to perform soil and groundwater sampling, field inspections and design of solid waste facilities. Will also be providing modeling services, subcontractor oversight and project coordination. We require a self-motivated growth seeker who is effective at combining creative thinking with logical design ideas to develop solutions to challenging environmental problems. Requirements: • Bachelor’s degree in environmental engineering., • Trained in OSHA 40 Hour HAZWOPER preferred., • E.I.T. preferred., • Strong knowledge of Microsoft Office software (Word, Excel, Outlook)., • Experience with solid waste projects and knowledge of state and federal regulations is a plus., • Strong technical and problem-solving skills including attention to detail, accuracy, and completeness., • Possess an energetic and professional demeanor., • Interaction with clients and regulatory agencies., • Strong verbal and written communication skills., • Strong analytical and judgment capabilities., • Field work as required., • Ability and willingness to travel to various client sites., • Own vehicle with a valid driver's license.We offer employees competitive compensation packages, medical/dental/vision, life insurance, short, and long-term disability, paid holidays, paid time off, and 401k retirement plan with company match. YU & Associates' is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees’ well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: · Benefits: • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program – based on individual and company performance., • Yearly review – based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation, • Beneficiary Grief Support SALARY RANGE: $60,000 - $70,000 Powered by JazzHR KhZsZf4pLM

Job DescriptionStructural Senior Staff Engineer Full Time | Newark, NJ, US Who We Are At FPA, we are looking for talented and driven professionals to join our commitment to pushing the boundaries of what is possible and providing cutting-edge solutions that make a difference in people's lives. We value individuals who are passionate about their work, who are committed to delivering quality results, and who are eager to learn and grow with us. We value candidates of all backgrounds, experiences, skill sets, and walks of life. At FPA, we actively foster a work environment that promotes inclusion and diversity, which is embedded in the foundation of our practice through policies, training, local partnerships with professional and diverse organizations, internal networks, and leadership support. We offer a dynamic and collaborative work environment where employees are encouraged to share ideas, take on new challenges, and contribute to the success of the company. As an FPA employee, you will have the opportunity to achieve anything you set your mind to, and to help shape the future. If you are a motivated individual who is looking for an exciting and rewarding career opportunity, we encourage you to apply to be a part of a dynamic and inclusive community of professionals. This Opportunity FPA is currently searching for a full-time Structural Senior Staff Engineer in our Newark, New Jersey Office. We are seeking an experienced Structural Engineer with 3 to 5 years of experience. This role is ideal for an experienced engineer with 3–5 years of structural design experience who is looking to take the next step in their career. At FPA, our unwavering commitment to dedicated service and innovative solutions has empowered us to build thriving communities and expand our horizons. The ideal candidate will work alongside other talented engineers from various disciplines, collaborating to design, develop, and deliver projects that make a real difference in people's lives. They will bring a fresh perspective, a passion for engineering, and a commitment to excellence. Joining our team will provide you with an excellent opportunity to unlock your full potential, gain invaluable experience, and create a meaningful impact on the world. Responsibilities * Lead the design and analysis of building structures using steel, concrete, masonry, and timber materials. * Prepare and review design calculations, drawings, and technical specifications. * Perform advanced structural modeling and analysis using software such as ETABS, SAP2000, RAM, or similar. * Collaborate closely with architects, clients, and other engineering disciplines to develop coordinated design solutions. * Provide technical guidance and mentorship to junior engineers and designers. * Conduct site visits, perform field inspections, and prepare technical reports. * Assist with project management tasks including scheduling, coordination, and quality assurance. * Stay current with building codes, design standards, and emerging technologies relevant to structural engineering. Qualifications * Master’s degree in Structural Engineering (preferred) or Civil Engineering with a structural emphasis. * 3–5 years of professional experience in building structural design. * EIT certification required; PE license or ability to obtain within one year strongly preferred. * Proficiency with structural analysis and design software (ETABS, SAP2000, RAM, RISA, or similar). * Working knowledge of AutoCAD and/or Revit. * Strong understanding of applicable building codes and standards (IBC, ASCE 7, ACI, AISC, etc.). * Excellent communication, organization, and problem-solving skills. * Ability to manage multiple projects and meet deadlines in a collaborative team environment. Benefits As a valued member of our team, we provide you with a flexible benefits package that reflects our respect for your workplace contributions, professional goals, and personal priorities. FPA offers an extensive range of benefits, including medical, dental, vision, disability, life, and retirement savings, aimed at ensuring the physical well-being and financial security of employees throughout their careers. The personal benefits program at FPA includes the following: • Medical, Dental, Vision insurance, • 401(k) Retirement Plan with Employer Matching & Roth 401(k) Option, • Individual and Dependent Life Insurance, • Short and Long-Term Disability Insurance and Supplemental Insurance Plans, • Employee Assistance Program (EAP) and Wellness Benefits, • Tuition Reimbursement, • Training and Professional Development, • Corporate sponsored events, outings & activities, including community outreach opportunities., • Competitive Personal Time Off Program (PTO), • Transit/Parking Program, • Summer Hours, • Employee Discounts The projected compensation range for this position is $74,000 to $90,000. Actual compensation will depend on factors such as experience, education and skill set. About FPA Since 1974, French & Parrello Associates (FPA) has partnered with clients to address the ever-changing challenges of the world around us. Nationally and locally ranked among Engineering News - Record’s Top Firms, FPA has the staff and resources to provide innovative engineering services to clients in both the public and private sectors across a growing network of locations in New Jersey, New York, Pennsylvania, and Georgia. From modernizing the aging infrastructure, to designing state-of-the-art facilities and serving as stewards to our environment, FPA improves quality of life. At our core, we are a dedicated group of professionals focused on servicing our clients and improving our world. Our team’s technical resources include site/civil, water, wastewater, water resources/dams, geotechnical, structural, bridge, highway, mechanical and electrical engineers, licensed land surveyors and landscape architects, as well as environmental professional and LSRPs, materials testing technicians, and construction oversight professionals and technicians. Our ability to service our clients is bolstered by a highly motivated team of marketing, business development, accounting, information technology, and administrative staff. Our professionals’ daily contributions play a crucial role in achieving client objectives, meeting goals, and improving our world.

Job DescriptionOverview Company Overview: Join Allied Universal® Technology Services, a global leader in transforming the security industry. We integrate advanced technology - video surveillance, electronic access control, alarm monitoring and augmented solutions with physical security to help people feel safe. Whether you're an installation technician, service technician, engineer, or project manager, you'll discover rewarding opportunities to grow your career as part of a valued team. Apply today and be phenomenal-build a meaningful career while protecting what matters most through innovative security technology. Job Description: Job Description Allied Universal® Technology Services is looking to hire a Senior Applications Engineer. This role provides advanced expertise to installation and service teams, ensuring seamless interoperability across complex security platforms and enterprise applications. The Senior Applications Engineer will drive high-level troubleshooting, custom programming, system commissioning, software upgrades, and advanced diagnostics. Candidates should bring deep proficiency with integration tools, the ability to implement tailored software interfaces, and a proven track record of delivering scalable, secure, and high-performing solutions. Salary Range: $100,000 - $135,000 annually RESPONSIBILITIES: • Design and oversee advanced security system integrations to deliver cohesive, enterprise-level solutions., • Configure LAN (Local Area Network) and wireless network infrastructures to optimize connectivity, system reliability, and performance., • Lead advanced diagnostics and root-cause analysis to ensure peak system functionality and long-term stability., • Partner strategically with Project Managers, End Users, and Technical Teams to guide successful software deployment and utilization., • Resolve complex project-related software and system issues, coordinating with cross-functional technical resources as needed., • Direct escalation protocols, ensuring critical issues are communicated and mitigated promptly to minimize business impact., • Advise and coordinate with leadership to drive efficient timelines, effective resource allocation, and scalable project execution., • Oversee and schedule software licensing, compliance, and advanced training programs to foster continuous professional growth across teams., • Develop and lead end-user training strategies, ensuring seamless software adoption, optimized system operation, and enhanced client satisfaction. QUALIFICATIONS (MUST HAVE): • High school diploma or equivalent, • Minimum of three (3) year of experience programming and troubleshooting access control and video systems, • Advanced knowledge of industry-leading security system and equipment providers, working with enterprise level clients or large projects, • Product specific certification(s) with access control systems and video platforms, such as AMAG, Lenel, Milestone, Genetec, SoftwareHouse, • High level decision-making and complex problem-solving ability to develop innovative solutions that align with organizational strategy, • Expert ability to interpret, evaluate and apply advanced technical documentation, ensuring systems and solutions meet enterprise and client requirements, • Advanced proficiency with MS Office Suite (Excel, Outlook, PowerPoint, Project, SharePoint and Word), • Exceptional verbal and written communication skills, with internal and external stakeholders, • Ability to establish and maintain trusted partnerships across executive leadership, technical teams and client organizations PREFERRED QUALIFICATIONS (NICE TO HAVE): • Salary Range: $100,000 - $135,000 annually, • Medical, dental, vision, basic life, AD&D, and disability insurance, • Enrollment in our company's 401(k)plan, subject to eligibility requirements, • Eight paid holidays annually, five sick days, and four personal days, • Vacation time offered at an accrual rate of 3.08 hours biweekly. Unused vacation is only paid out where required by law. #LI-EB1 Closing Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: If you have any questions regarding Equal Employment Opportunity, have difficulty using the online system and require an alternate method to apply, or require an accommodation at any time during the recruitment and/or employment process, please contact our local Human Resources department. To find an office near you, please visit: . Requisition ID 2025-1441056

Job Description T&M Associates is seeking a skilled and experienced Plumbing and Fire Protection Engineer to join our growing MEP team. The ideal candidate will have 12+ years of experience designing plumbing and fire protection systems for a wide range of building types. This individual will support project objectives, contribute to financial success, assist with technical review of proposals and project tracking, and help mentor junior technical staff. The ideal candidate will have experience designing systems including domestic hot and cold water, sanitary and vent, storm drainage, natural and medical gas, compressed air, sprinkler, fire pump, and clean agent fire suppression systems. This position can be based out of any of our NJ or PA offices. Qualifications: • 12+ years of experience in plumbing and fire protection design across various building types, • Bachelor of Science in Mechanical Engineering (preferred), • Professional Engineer (PE) License (preferred), • Certified Plumbing Design (CPD) and/or Certified Fire Protection Specialist (CFPS) certifications (preferred), • Proficiency in the latest version of AutoCAD required, • Experience with Revit preferred T&M Associates offers a competitive and comprehensive benefits package designed to support the health, well-being, and professional growth of our employees. Benefits include comprehensive insurance (medical, dental and vision), a 401(k) with company match, paid time off, flexible work schedules, wellness programs, and professional development opportunities — all within a people-first, award-winning hybrid work environment. See more details about benefits here. If this sounds like a company you want to be part of then apply now! New Hires must have documents indicating they are eligible to work in the United States. EEO/AA Employer. For California based applicants, our CCPA-CRPA Privacy Notice can be found on our Careers page at #LI-HYBRID

Job Description Product Sales Engineer Engineered Equipment | Capital Machinery | Processing & Water Treatment Industries Drive Innovation. Empower Solutions. Engineer Growth. We are seeking a Product Sales Engineer to join our high-performance team supporting the sales and application of custom and benchmark electro-mechanical equipment across industries such as food & beverage, packaging, and water/wastewater treatment. This role bridges the gap between engineering and sales—combining technical expertise, client engagement, and commercial strategy to support field sales teams, drive customer satisfaction, and grow market share. Who You Are: You’re a technically savvy professional with a background in equipment manufacturing, Packaging, Food & Bev, process systems, or water treatment solutions—ready to leverage your knowledge into consultative sales support. You enjoy collaborating across departments, mentoring others, and solving problems creatively. Preferred Backgrounds: • Electro-mechanical systems, • Capital equipment (packaging, processing, filtration, or automation), • Water/Wastewater systems, • Process equipment for industrial or municipal markets Degree preferred: Mechanical, Electrical, Chemical, or Systems Engineering (Associate or Bachelor’s level), or equivalent technical experience. Key Responsibilities Technical Sales Support • Partner with Field Sales Representatives to analyze customer requirements, recommend solutions, and configure systems that align with performance and budget goals., • Serve as the subject matter expert for specialized equipment and develop competitive product positioning., • Assist in proposal development, quote generation, and pricing strategy for complex systems., • Mentor and train Field Sales Representatives in product capabilities, sales strategies, and competitive differentiators., • Analyze industry trends and competitive data to help identify market opportunities and enhance sales strategy., • Maintain accurate, professional documentation of sales activities, client communications, and engineering support., • Provide feedback to product development and marketing teams to drive continuous improvement. Qualifications • 3–5+ years of experience in technical sales, application engineering, or product management within a capital equipment or electro-mechanical manufacturing environment., • Strong understanding of custom machinery or engineered system design., • Familiarity with CAD platforms, CRM systems (e.g., Salesforce or HubSpot), and project tracking tools., • Demonstrated success supporting or leading complex sales engagements., • Excellent communication, problem-solving, and customer relationship-building skills., • Willingness to travel (up to 5%) and perform light hands-on tasks as needed for product demos or events. What We Offer • A collaborative culture where engineering and innovation are celebrated., • Competitive base compensation + performance bonuses., • Ongoing training and development programs to support your professional growth., • Mentorship opportunities and a path to advance into senior technical, sales, or operational leadership roles., • A team-first environment where your ideas and expertise are valued. Be Part of Something Bigger If you thrive in a solution-driven environment and are ready to contribute your technical talent to a company that builds world-class systems for critical industries—this is the opportunity for you. We are an equal opportunity employer and welcome applicants from all backgrounds and experiences.

Job DescriptionAbout the Company A powerhouse in Enterprise SaaS, leading the charge for Fortune 100 companies in privacy governance, security, and unified consent management. Their patented Hybrid AI platform processes 50M+ privacy requests daily, driving innovation and shaping the future in a hypergrowth marketplace (with industry 37.7% CAGR). Expect a culture where visionaries are empowered, expertise is valued, and impact is measured at enterprise scale. * Company HQ: Greenville, DE, US * Product: AI-powered privacy compliance and data governance platform (SaaS) * Candidate Location: Greenville, DE or Falls Church, VA 2-3 days per week (company-paid relocation available) * Start Date: As soon as possible The Mission Our client's mission is to contribute to a better society by advocating for proper data protection legislation, responsibly safeguarding customer data, preserving individual privacy rights, and enhancing trust between businesses and consumers through greater transparency. The Opportunity As a Forward Deployed Engineer, you will step into a strategic role with a clear, performance-based pathway to Director of Engineering within 18 months. You’ll design and deliver core platform features, lead cross-functional initiatives, and collaborate with executive stakeholders to shape the product’s future. Expect real executive exposure, ownership of greenfield builds, and the chance to become a recognized technical leader in a fast-moving, high-growth environment. What You'll Do * Write high-quality, scalable code in JavaScript, React, Node.js (about 50% of working time) * Provide technical mentorship and guidance to engineers * Collaborate with the CEO/CTO on product architecture and technical strategy * Engage with enterprise clients via remote calls, assisting in technical implementation and rollout * Support the design of secure, performant data privacy solutions that manage consent and protect customer PII * Drive engineering best practices and elevate overall code quality * Contribute to new features that align with privacy compliance and security standards What You Bring * 10+ years of experience in software engineering roles * Bachelor’s degree or higher in Computer Science or a related field (required) * Experience building modern applications and APIs using JavaScript, React, and Node.js * Strong understanding of object-oriented programming, such as Java, C++, C, or similar * Hands-on experience designing and building database connectors * Strong proficiency in debugging complex software issues * Proven track record in mentoring or guiding other developers * Ability to communicate and collaborate with clients during implementation (calls only) * Familiarity with scalable system design and architecture * Willingness to work 2-3 days in the office * Bonus: Experience with Elastic Search Preferred Technical Skills * Programming: JavaScript and object-oriented programming, such as Java, C++, C or similar (PHP) * Frontend: ReactJS, JQuery, Bootstrap * Backend & API: RESTful APIs, AJAX, microservices architecture * Databases: SQL, NoSQL (Cassandra, MongoDB), Big Data (Hadoop, Hive, HBase) * Caching & Messaging: Redis, RabbitMQ * Cloud & Containerization: Docker, AWS, IaaS, PaaS * DevOps & Version Control: Git, Bitbucket, third-party testing frameworks * Bonus: Experience with Elastic Search * Bonus: Security/privacy technologies (encryption, vulnerability assessment) * Bonus: Open-source project contributions Key Success Drivers * Self-Direction: Strong self-discipline and self-motivation * Integrity: High ethical standards, honesty, and transparency * Adaptability: Comfort in a fast-changing, startup-like environment * Collaboration: Ability to work effectively with diverse team members * Leadership Mindset: Proactive leadership and collaborative approach Why Join? * Compensation: $130,000-$165,000 annually (negotiable depending on experience) * 100% paid medical, dental, and vision for employees and families (gold plan with zero out-of-pocket) * 401(k) plan and company-paid life insurance * Company-paid relocation if needed * Hybrid 2-3 days in-office, promoting real work-life balance * 2 weeks paid vacation to recharge * Tuition reimbursement for continued education and technical training * Clear path to the Director of Engineering role within 18 months * Significant influence on architecture and engineering practices * Contribute to protecting individual privacy rights and enhancing consumer trust * Be part of a company processing 50 million privacy requests daily * Work alongside talented engineers in a supportive environment * Regular company-paid events, celebrations, and dinners * Proven success with Fortune 100 customers and established product-market fit Interviewing Process * HR Screening * Level 1: Phone interview with the Hiring Manager (technical background and client communication skills) * Level 2: On-site interview in the office (skills assessment) * Reference and Background Checks: conducted after successful interviews * Job Offer: provided to the selected candidate We are proud to be an equal opportunity workplace and are committed to equal employment opportunity regardless of race, color, religion, national origin, age, sex, marital status, ancestry, physical or mental disability, genetic information, veteran status, gender identity, or expression, sexual orientation, or any other characteristic protected by applicable federal, state or local law. Compensation Range: $130K - $165K

Job DescriptionPOSITION SUMMARY: The Bridge Engineer Project Manager is a highly experienced design professional with 8+ years of experience in bridge design and transportation infrastructure. This individual will lead project management, client relations, and oversee the design and engineering services throughout all phases of bridge projects, working under the supervision of the Department Manager. The Project Manager will be responsible for delivering high-quality bridge design solutions for state, county, and federal projects. PRIMARY DUTIES: • Plan, develop, and manage bridge engineering projects for clients, including DOT, county, and other transportation agencies., • Lead bridge design efforts, ensuring technical excellence and compliance with regulations and standards, such as AASHTO, NJDOT, and PennDOT design manuals., • Supervise and mentor junior engineers, providing oversight, guidance, and training on technical aspects of bridge design., • Coordinate with multidisciplinary teams to prepare technical reports, detailed construction drawings, and specifications for bridge projects., • Maintain strong technical knowledge of bridge design techniques, procedures, materials, and relevant engineering software., • Perform independent, complex engineering calculations for bridge structures and create accurate construction plans and estimates., • Ensure all design work adheres to client and corporate quality control procedures throughout the project life cycle., • Review and provide feedback on the work of engineers, CAD drafters, and other technical staff to ensure accuracy and quality., • Interact with clients and oversee the work of subconsultants, ensuring the project meets the agreed-upon goals and specifications., • Assist in new business development, including attendance at industry events and participation in project proposal presentations., • Lead competitive proposal efforts for bridge design projects in coordination with the marketing and business development teams., • Support the Department Manager in job planning, scheduling, and coordination of multiple technical disciplines for complex bridge projects., • Monitor and manage project schedules and budgets, ensuring timely delivery and cost control., • Extensive experience in bridge design and engineering, including the application of AASHTO, NJDOT, and PennDOT standards., • Proven experience managing complex bridge engineering projects from design through construction., • Familiarity with design software such as AutoCAD, MicroStation, and bridge-specific tools like LEAP Bridge and STAAD., • Strong understanding of DEP, stormwater, and environmental regulations that impact bridge projects., • Ability to work effectively in a team environment and provide leadership in technical project delivery., • Proficiency with Microsoft Office software, including Excel, Word, and Project for tracking project data., • Strong knowledge of bridge design manuals, procedures, and relevant engineering software., • Experience on major DOT projects (NJDOT, PennDOT, PANYNJ) with a focus on bridge design., • Knowledge of modern bridge construction techniques, materials, and specifications., • Strong ability to manage client relationships and deliver project proposals in collaboration with business development teams.EDUCATION/EXPERIENCE:, • Bachelors of Science Degree in Civil Engineering from an accredited four-year college or university CERTIFICATIONS/LICENSES REQUIRED • PE License Preferred, • EIT License Required PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee occasionally works in the field and may be exposed to outside weather conditions. Work requires frequent and prolonged computer use. May occasionally lifting up to 25 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $92,000 - $151,800. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary.

Job DescriptionTitle: Enterprise Applications Engineer Location: New Jersey Office (Hackensack) Job Summary:Seeking an Application Engineer whose primary focus will be ensuring the stability, availability, and supportability of the Firm’s Enterprise application stack. This person will work closely with the Enterprise Applications Manager, Accounting, Marketing, Records, and other firm personnel to ensure all applications run optimally and without interruption. Good communication, technical and analytical skills are required, with a heavy focus on Windows Server and SQL (querying, reporting in SSIS and other tools, maintenance, documentation, and upgrades). Some programming knowledge would be a ‘nice to have,’ but expert knowledge is not required. Essential Job Functions and Responsibilities: • Administer, develop, and support the Firm’s Elite 3E platform. Including, but not limited to Thompson Reuters Elite 3E, Paperless Performa, Design Gallery (“DG”), Workspace, and Iridium., • Responsibilities within the firm’s financial/marketing application stack include:, • Scheduling month-end maintenance such as: Windows updates, SQL maintenance, query optimization, and security patching, • Inter-department coordination during system upgrades; assessing and communicating risk factors of upcoming upgrades, primarily when integrated systems cause a “trickle-down” effect, • Coordinate with application stakeholders and IT team to prioritize and address issues and future objectives for financial systems, • Responsible for testing financial system applications during system changes, enhancements, upgrades, and monthly system maintenance,, • Documentation of system setup, integrations, backup, and disaster recovery processes, • Communicates and informs the department and management of project statuses, issues, and proposed resolutions, • Manage vendor support tickets, • Track and optimize system performance and storage utilization, plan for necessary hardware or software upgrades to support system growth, • Research and evaluate new tools/technologies to improve the current application stack, • Utilize tools to protect application source code and maintain versioning., • Any additional responsibilities as required by management, • Other responsibilities include:, • Compulaw administration, maintenance and integrations, • Support requests/tickets escalated from the helpdesk team, • Documentation of processes/procedures, ‘how-to’ guides, and frequently asked question resolution, • Basic ‘end user’ application troubleshooting and maintenance such as: FasTax, B&A Forms, Allstate legal forms, LexisNexis etc.Knowledge, Skills & Abilities:, • 3+ years’ experience operating with legal accounting and time management software required, experience with Elite 3E preferred, • Fluency in the Elite 3E SQL database schema preferred or demonstrated ability to develop such fluency, • Experience with maintaining 3E Templates (“Design Gallery”), Workspace and BizTalk, • Proficiency in Elite Application Framework and Tools; Example: IDE, • Knowledge of 3E Solutions Manager a plus, • Proficiency in SQL reporting (“SSRS”), • Ability to learn functional and technical integration aspects of the firm’s applications such as Iridium, Foundations, Concur, • Experience administering Windows Server, • Solid technical foundation with the ability to troubleshoot, diagnose and resolve complex problems and implement solutions with minimal guidance, • Self-motivated person with excellent time management skills, • Strong analytical skills with the ability to communicate results, • Excellent verbal and written communication skills, and the ability to communicate with staff of varying technical expertise, • Proficiency in XML/XSLT transformation, • Knowledge of C# and Visual Basic .Net, HTML5 programmingEducation and/or Experience:, • Minimum 3 years’ experience in management, design, and implementation of large enterprise applications in a heterogeneous operating system environment with hands-on experience in maintaining mission critical enterprise applications at a high level of availability., • Requires broad knowledge of the specialized and technical field of computer science, and business/management acumen equivalent to a complete college or university education; includes thorough skills knowledge., • 4-year college degree preferred, equivalent experience considered.Technical Skills & Requirements: Minimum of 5 years’ experience in the design, implementation and maintenance of Windows computer systems. Experience with Microsoft SQL required, working knowledge of Active Directory administration and maintenance a plus.

Job Description Auto-Chlor is now hiring an Electrical Engineer-Equipment Design to lead our engineering development initiatives. We’re looking for a leader who will contribute to our “People First” culture. This position would work in-office full-time at our facility in MEMPHIS, TN. What’s in it for you? • A people first culture where contributions and collaboration are encouraged and celebrated., • A competitive salary up to $150k annually with an excellent benefits package., • Ongoing wellness initiatives to improve your health and well-being. What are some of the day-to-day responsibilities? • Develops and implements solutions for dishwasher and dispensing innovation projects, including both new equipment development and existing equipment innovation. Projects vary in duration from two months to over a year based on Project Brief requirements., • Administers regulatory compliance with agencies such as NSF, CSA, UL, BOCA, ASSE, UPC, and Federal, State, and Local authorities. Provides support to the field sales team on regulatory issues, with an emphasis on maintaining customer equipment operation without disruption to business., • Provides technical support to field sales team, contractors, consultants, engineers, and architects., • Develops and manages technical documentation for design control and field use. Requirements: • Bachelor of Science in Engineering Degree or comparable years of work experience., • 5-10 years of electrical and electronic design experience, along with experience working with regulatory agencies. Experience in the commercial appliance industry is preferred., • Embedded Software/hardware design, • Knowledge of codes and standards for plumbing, sanitation, electrical, and building (NSF, CSA, UL, BOCA, ASSE, UPC, FDA), • Electrical/electronic circuit design, • CAD Modeling – Autodesk Inventor Preferred Location: 746 Poplar Ave Memphis, TN 38105 #PROFESSIONAL

Job DescriptionCompany Description STS Aerospace is a world-leading provider of reliable, top-quality products for fluid conveyance, serving commercial and military aircraft and the energy, space and marine industries. The depth and breadth of our engineering expertise enables us to design, build and customize fixtures and tooling that will meet the needs and solve the problems you are experiencing now and prevent issues from emerging in the future. Job Description STS Aerospace is looking for a Manufacturing Engineer that is accountable for improving and maintaining first pass yield for specified parts and/or processes. This is accomplished by driving continuous improvement initiatives, process development/modification, documentation of standards/best practices, and equipment onboarding/troubleshooting. Candidate shall also support cross functional initiatives with Production, Quality and Purchasing departments to meet company goals and product quality standards. Scope of Responsibilities: • Troubleshooting of quality issues throughout the production process: welding, brazing, nickel plating, cleaning, and borescope inspection. Additional processes: bending., • Use continuous improvement and lean techniques to increase production efficiency, eliminate waste, and drive cost savings opportunities., • Support production staff with specification/technical knowledge, inspection techniques, weld/braze consumables management and day-to-day trouble shooting efforts., • Documentation and standardization of processes via work instructions and operating instructions to increase efficiency, facilitate cross-training and enable proper equipment usage., • Equipment and tooling on-boarding into production process to support new product, process efficiency, ergonomics or safety. Basic troubleshooting, light-level repair and/or export of orbital weld machines, orbital weld heads, steam cleaning machines, tungsten grinders etc., • Effective communication with production employees, management staff and cross-functional team to ensure the alignment of efforts to meet company goals., • Conduct classes and trainings to support continuous improvements efforts and product quality i.e. Visual Inspection and Back-to-Basics courses., • Manage operator qualifications to ensure production staff is qualified to perform given tasks, • Ability to work in a fast-paced, deadline-oriented team environment, • Ability to read, interpret, translate engineering drawings and customer specifications to drive compliance, • Excellent team player with a great attitude. Accountabilities • Support of Team Goals, Represent company as process expert, requisition tooling and equipment for processes., • Performance Measurement & Performance Evaluation., • Meet team quarterly objectives. Adherence to goals and behaviors associate with achieving them, • First pass yield, • Process compliance (welding, bending, brazing, chemical), • Project completion/execution, • Aging (units over lead-time)Qualifications, • Proven working experience as a manufacturing engineer or in a related field., • Experience in blueprint reading and spec interpretation., • Must be comfortable in a manufacturing environment often fast-paced and loud., • Must be able to stand, lift, walk, bend, and reach during their shift., • Must be comfortable wearing safety glasses., • Work well within a team., • Creative and innovative thinking skills., • Problem-solving skills. Additional Information Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Health insurance, • Life insurance, • Paid time off At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job DescriptionYU & Associates, Inc., an awarding winning engineering firm located in Elmwood Park, New Jersey is seeking a Senior Utility Engineer to join our team. As a Senior Utility Engineer, you will be responsible for supporting the planning, design, and preparation of contract documents for the construction of stormwater and utility infrastructure. Responsibilities: • Manage utility aspects of projects, oversee design and production of plans and specifications, and ensure that the work is produced on schedule profitably., • Collaborate with project teams to analyze utility relocation conflicts on infrastructure projects., • Review and provide feedback on Utility Owner design submittals., • Coordinate utility design efforts with consultants and stakeholders., • Perform constructability reviews to ensure compatibility with construction methods., • Analyze projects and direct ASCE SUE investigations., • Compile and compute a variety of engineering data., • Prepare plans, and details and develop engineering drawings, specifications, and other project deliverables., • Support and participate in the development and mentorship of staff. Qualifications: • Bachelor’s degree in civil engineering or related field., • PE License in New Jersey and/or New York required, or ability to obtain within 6 months., • Must have a minimum of 5 years of experience in project engineering design., • Skilled with CAD/Design Software (AutoCAD, MicroStation, Civil 3d, Inroads/Openroads)., • MS Office proficiency., • Experienced with ASCE standard governance of subsurface utility engineering., • Experience with different construction techniques and constructability of utilities and associated civil aspects in design-build projects., • Strong oral and written communication skills, self-motivation, team-oriented work practices, data analysis & technical problem solving, organizational skills and the ability to work effectively in a multi-disciplinary team environment., • Ability to travel to job sites., • Work productively and meet deadlines timely., • Ability to independently manage small to medium size projects.We offer employees competitive compensation packages, medical/dental/vision, life insurance, short, and long-term disability, paid holidays, paid time off, and 401k retirement plan with company match. YU & Associates’ is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. SALARY RANGE: $105,000 - $120,000 Powered by JazzHR hKcnA0Vo1S

Job Description POSITION SUMMARY: The Water/ Wastewater Project Engineer/Manager is a professional with a minimum of 5 years of experience. This individual will plan, design and perform analysis on water/wastewater engineering projects such as pipelines; pumping stations; and treatment facilities. Engineer shall be self-motivated, capable of acting as firm’s representative to clients, and providing support to branch offices in NJ/PA/DE. PRIMARY DUTIES: · Hydraulic calculations and layout of structures. · Producing correspondence/reports/biddable documents for arsenic, radium and iron removal water plants; wells; water storage tanks; pumping stations; piping systems; and wastewater treatment plant improvements. · Engineering support to our inspection department. · Act as firm’s representative to Townships; utility authorities; and private utility companies. · Draft concise proposals for new work. · Capable of addressing multiple simultaneous assignments, on-time and within budgets. · "Proactive"' identification of problems/issues coupled with detailed analysis and effective resolution. · Producing all deliverables associated with this position. · Capable of addressing multiple simultaneous assignments, on-time and within budgets. · Regulatory permitting. · Assist with energy audits. KNOWLEDGE, SKILLS and ABILITIES: · Knowledge of water/wastewater equipment and their purpose. · Ability to read and comprehend complicated construction, drawings, schematics, specifications, codes, and handbooks. · Ability to clarify and concisely express thoughts verbally and in written correspondence/reports/specifications. · Provides effort and takes pride in all work assignments produced. · Not afraid to ask for guidance/assistance in order to expedite the date of assignment deliverables. · Ability to simultaneously work on group and individual assignments. · Capable of providing directions and mentoring less experienced staff. · Capable of managing project meeting attended by either staff, clients or contractor’s personnel. · Familiarity with PADEP regulations and compliance requirements. · Must have effective communication, management and writing skills. · Must be skilled in the use of Word/Excel products. · AutoCAD capability a plus. EDUCATION/EXPERIENCE: · Bachelors of Science Degree in Civil, Mechanical, Structural, or Chemical Engineering curriculum from an accredited four-year college or university. CERTIFICATIONS/LICENSES REQUIRED · New Jersey PE Licenses Required or Ability to Acquire NJPE Reciprocity Essential PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee occasionally works in the field and may be exposed to outside weather conditions. Work requires frequent and prolonged computer use. May occasional lift up to 25 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary. #ZR Company DescriptionFounded in 1901, RVE has grown continuously to nearly 500 employees in 15 offices throughout New Jersey, Pennsylvania, Delaware, Maryland, and North Carolina. RVE is a full-service engineering consulting firm that provides design, planning, and construction management/inspection services to our clients. Our staff includes Professional Engineers (civil, mechanical, electrical, structural, transportation, sanitary, and environmental), Professional Planners, Certified Landscape Architects, Certified Inspectors, Surveyors, CADD Designers, and administrative support personnel. The Engineering News Record consistently ranks RVE in the Top 300 design firms and Top 100 construction management firms in the nation. As a firm, RVE has long supported and currently supports a variety of on-call, general engineering consultant (GEC), and construction management contracts.Founded in 1901, RVE has grown continuously to nearly 500 employees in 15 offices throughout New Jersey, Pennsylvania, Delaware, Maryland, and North Carolina.\r\n\r\nRVE is a full-service engineering consulting firm that provides design, planning, and construction management/inspection services to our clients. Our staff includes Professional Engineers (civil, mechanical, electrical, structural, transportation, sanitary, and environmental), Professional Planners, Certified Landscape Architects, Certified Inspectors, Surveyors, CADD Designers, and administrative support personnel. The Engineering News Record consistently ranks RVE in the Top 300 design firms and Top 100 construction management firms in the nation. \r\n\r\nAs a firm, RVE has long supported and currently supports a variety of on-call, general engineering consultant (GEC), and construction management contracts.

Job DescriptionPOSITION SUMMARY: The Water/ Wastewater Project Engineer/ Manager is a professional with a minimum of 8 years of experience. This individual will plan, design and perform analysis on water/wastewater engineering projects such as pipelines; pumping stations; and treatment facilities. Engineer shall be self-motivated, capable of acting as firm’s representative to clients, and providing support to branch offices in NJ/PA/DE/MD area. PRIMARY DUTIES: • Hydraulic calculations and layout of structures., • Producing correspondence/reports/biddable documents for arsenic, radium and iron removal water plants; wells; water storage tanks; pumping stations; piping systems; and wastewater treatment plant improvements., • Engineering support to our inspection department., • Act as firm’s representative to Townships; utility authorities; and private utility companies., • Draft concise proposals for new work., • Capable of addressing multiple simultaneous assignments, on-time and within budgets., • "Proactive"' identification of problems/issues coupled with detailed analysis and effective resolution., • Producing all deliverables associated with this position., • Capable of addressing multiple simultaneous assignments, on-time and within budgets., • Regulatory permitting., • Knowledge of water/wastewater equipment and their purpose., • Ability to read and comprehend complicated construction, drawings, schematics, specifications, codes, and handbooks., • Ability to clarify and concisely express thoughts verbally and in written correspondence/reports/specifications., • Provides effort and takes pride in all work assignments produced., • Not afraid to ask for guidance/assistance in order to expedite the date of assignment deliverables., • Ability to simultaneously work on group and individual assignments., • Capable of providing directions and mentoring less experienced staff., • Capable of managing project meeting attended by either staff, clients or contractor’s personnel., • Familiarity with NJDEP regulations and compliance requirements., • Must have effective communication, management and writing skills., • Must be skilled in the use of Word/Excel products., • Bachelors of Science Degree in Civil, Mechanical, Structural, or Chemical Engineering curriculum from an accredited four-year college or university. CERTIFICATIONS/LICENSES REQUIRED • NJPE License Required or Ability to Acquire NJPE Reciprocity Essential, • Professional Licensure Required PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee occasionally works in the field and may be exposed to outside weather conditions. Work requires frequent and prolonged computer use. Occasional lifting up to 25 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $92,000 - $151,800. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary.

Job Description Senior Electrical Engineer – AEC Industry Location: Hybrid | Midland Park, NJ or Goshen, NY Compensation: $115,000 – $160,000/year (commensurate with experience) Job Type: Full-time | W-2 | With Comprehensive Benefits Hybrid Schedule: 3 days onsite / 2 days remote (after 90-day in-office onboarding) Join LAN Associates: Award-Winning AEC Firm with 60 Years of Excellence! LAN Associates, Engineering, Planning, Architecture, Surveying, Inc. (LAN) is a top-rated, mid-sized, multi-disciplinary architecture and engineering (AEC) firm with a 60-year legacy in delivering high-impact building design solutions across commercial, educational, healthcare, hospitality, residential, and institutional markets. We are actively seeking a Senior Electrical Engineer to join our growing electrical engineering team. This role offers the opportunity to work on diverse, complex building projects while leading junior team members and collaborating with a multi-disciplinary project team. Key Responsibilities – Senior Electrical Engineer: * Lead, mentor, and develop junior electrical engineering staff * Plan, design, and coordinate electrical systems for various building projects in compliance with NEC, NFPA, IEEE, and other codes * Perform and review electrical calculations, including load calculations, voltage drop, short-circuit analysis, and equipment sizing * Prepare technical reports, specifications, and permit applications * Conduct quality assurance reviews of electrical design work and ensure accuracy of construction documents * Collaborate with architects, engineers, consultants, and clients throughout the project lifecycle * Participate in project meetings, including design reviews and construction coordination * Support construction administration including RFI responses, submittal reviews, and site visits * Contribute to proposal development and business development initiatives * Ensure project budgets, timelines, and scope are maintained Minimum Qualifications: * 7+ years of electrical engineering experience in the Architecture, Engineering, and Construction (AEC) industry * Bachelor’s degree in Electrical Engineering * PE license (preferred) or EIT with a path toward licensure (NY and NJ preferred) * Strong proficiency in AutoCAD; Revit experience a plus * In-depth knowledge of NEC, NFPA, IEEE, ANSI standards, and applicable building codes * Proven ability to read and interpret construction documents * Demonstrated experience in client-facing roles * Previous leadership or mentorship of junior engineers * Proficiency in Microsoft Excel and Word; load calculation software experience preferred * Valid driver’s license; willingness to travel locally (Tri-State area) up to 20% Preferred Qualifications: * 10+ years of experience in building electrical system design * Experience with electrical power analysis software (e.g., SKM, ETAP) * Revit proficiency for MEP systems coordination * Prior experience at a full-service architecture and engineering firm Why LAN Associates? LAN offers one of the best benefits packages in the AEC industry, designed to support your career growth and personal well-being: * Competitive salary + company performance bonuses * Employee-owned company | Stock options after 6 months * 100% company-paid Health, Dental & Vision Insurance (employee + family) * 401(k) with 3-5% company profit-sharing contribution * 15+ PTO days annually (increases with tenure) * 9 Paid Holidays + 1 Floating Holiday * Employer-paid Life Insurance, Disability, EAP & Wellness Programs * Continuing Education & Professional Development reimbursement * Mentorship, resource groups & internal leadership development * Pet insurance, voluntary benefits, and more! About LAN Associates: With over 130 professionals across offices in New Jersey, New York, and Pennsylvania, LAN delivers over $250 million in construction value annually. Our portfolio includes award-winning projects like The Vista at Christian Health, The Empty Sky 9/11 Memorial, and The Four Seasons Hotel expansions. We serve diverse markets including: * K-12 and Higher Education * Healthcare & Senior Living * Commercial & Mixed-Use * Hospitality * Government & Municipal Facilities * Faith-based & Nonprofits Our Core Values: Loyalty | Honesty & Integrity | Responsiveness | Innovation | Company Pride Alternate titles: Electrical Project Engineer | Electrical Design Engineer | Lead Electrical Engineer | Principal Electrical Engineer | MEP Engineer We are proud to be an equal opportunity employer. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionPLC Mechanical Automation Engineer PLC Mechanical Automation Engineer Position Overview We are seeking a skilled PLC Mechanical Automation Engineer to design, develop, and implement automation solutions that enhance production efficiency and reliability. The ideal candidate will have a strong background in HMI design and experience with various automation systems, ensuring seamless integration of mechanical and electrical components. Key Responsibilities • Design and develop HMI interfaces for automation systems, • Collaborate with cross-functional teams to integrate mechanical and electrical systems, • Troubleshoot and resolve issues in automation systems and processes, • Implement control systems and robotics solutions to improve operational efficiency, • Conduct testing and validation of automation solutions to ensure functionality and performance, • Provide technical support and training to end-users on automation systems, • Document project specifications, design changes, and maintenance proceduresQualifications, • Bachelor's degree in Mechanical Engineering, Automation Engineering, Electrical Engineering, or a related field, • Proven experience in HMI design and development, • Knowledge of automation systems and control systems, • Familiarity with robotics and electrical engineering concepts, • Strong troubleshooting skills and experience with SCADA systems, • Understanding of industrial engineering principles and process control, • Excellent communication and teamwork skills Medical, Dental and Vision 401 (k) with company match Holiday, Vacation and Sick Time Tuition Reimbursement Health Savings Accounts (HAS) Flexible Spending Accounts (FSA) Cigna Wellness Incentive Program Employee Assistance Program (EAP) Short Term Disability Group Life and Accidental Insurance Sun Life - Accident, Critical Illness, and Hospital Indemnity Insurance Smoking Cessation Program Pet Insurance • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 10/14/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description My client is a strong Energy Management and Building Automation company that is actively seeking a Building Automation Controls Technicians who can troubleshoot, install, service or program Building Automation systems. Duties include; • Diagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software., • Consults with the customer through data gathered and site assessments. Provides field proposals for retrofits, upgrades and or enhancements to existing equipment. Assists sales by providing technical recommendations for sales leads., • Manages assigned work to meet professional and efficient execution of time and customer satisfaction. Reports problems or changes to management immediately. Interfaces with branch manager, service manager, service project manager or subcontractors on projects to coordinate activities as required in an ethical and professional manner., • Provides sketches of field changes and discrepancies for engineering corrections and drawings. May assist with job layouts and bid proposals., • Communicates with customer upon arrival and before leaving the work site. Ensures high levels of customer satisfaction. Meets regularly with customer to become familiar with operating problems. Keeps customer informed on the nature of service provided, outstanding issues and recommends system enhancements, upgrades, and or replacement. Promotes the sale of add-on work, • Trains the customer in control systems operations. Delivers manuals and documentation to the customer for training needs as required., • Provides mentorship for certification of Controls Technicians and Service Technicians on complex building automation systems. Coaches, supports and trains mechanical workforce on non-complex, non-critical equipment., • Compiles job documentation, such as certificate of completion, customer training form, training certificates and punch lists., • Conducts extensive self-study (reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company., • Other duties related to the installing, commissioning and servicing of building controls and facilities management systems and energy management systems, as assigned., • Assists in the design and configuration of building control systems as defined by the contract documents. Creates flow diagrams, sequence of operations, and bill of material, network layouts and electrical schematics as required., • Assists in the development and testing of software programs necessary to operate the system per the intent of the project requirements., • Compiles and/or completes project as-built and close-out documentation #BuildingAutomatiion #Libertyjobs #midsenior #MechanicalContractor Building Automation, BAS, DDC, BAC, BAU, Direct Digital Controls, MRI, LON, LonWorks, BACnet, MODbus, Johnson Controls, Delta Controls, Honeywell, Tridium, Alerton, Building Automation Technician, Building Automation Service, Building Automation Engineer, Staefa, Solidyne, Andover Controls, Siemens, Carrier, Trane, York, ME, Mechanical Engineering, HVAC, HVAC Controls, ASHRAE, Boiler, Boilers, Chillers, RTU’s, Roof Top Units, Split Systems, MEP, Project Engineer, Project Manager, LEED, CEM, CEP, Certified Energy Manager, Certified Energy Professional, ATC, ATC Controls, Automatic Temperature Controls, Invensys, Metasys, Automated Logic, Schneider Electric, TAC, Siemens, Niagara AX, NiagaraAX, Building Automation Graphics, EBI, Symmetre, EMS, BMS, temperature controls

Job Description Electrical, Controls Engineer - Industrial Electro-Mechanical Machinery Industry Focus: Industrial Machinery I Electromechanical Equipment I Custom Automation Systems Robotics I Industrial Controls I Food and Beverage Manufacturing I Packaging Equipment I Water and Wastewater Treatment I Process Equipment I OEM Machine Building Overview: We are currently seeking to identify (2) Electrical Controls Engineers to join a well-established and growing industrial equipment manufacturer with over 50 years of engineering excellence. One opportunity is ideal for a junior to mid-level candidate with at least 2+ years of relevant experience, and the other is targeted for a senior-level engineer with more years of hands-on experience in electrical design, programming, controls, and industrial automation. This is your chance to join a team that builds large-scale electromechanical systems from concept through completion. From food production lines to custom process and water treatment equipment, you'll be working on machinery that makes a real-world impact. Responsibilities: · Design, develop, and program industrial electrical control systems to meet engineering and client requirements · Create electrical schematics, wiring diagrams, and panel layouts using AutoCAD Electrical or similar design software · Specify, select, and configure control system components such as PLCs, VFDs, relays, sensors, and breakers · Program PLCs and HMIs (Allen-Bradley, Siemens, or similar platforms preferred) · Layout and design control panels and motor control centers (MCCs) · Perform validation testing and troubleshoot electrical systems during build and final assembly · Collaborate closely with mechanical engineers, software engineers, and production teams to ensure full integration · Provide technical documentation including BOMs, manuals, wiring lists, and startup procedures · Travel as needed for commissioning and system validation (minimal and planned in advance) · Stay current with evolving industry technology, best practices, and safety standards Qualifications: We are hiring for two experience levels. Candidates must meet the criteria for one of the following profiles: Junior to Mid-Level Role: · Minimum 2 years of experience in electrical controls, panel design, or related engineering environment · Experience with AutoCAD Electrical or similar drafting tools · Working knowledge of industrial components and safety regulations · Basic PLC programming knowledge or exposure to automation software · Strong interest in hands-on engineering, testing, and troubleshooting · Bachelor's degree in Electrical Engineering or equivalent hands-on experience Senior-Level Role: · Experience in electrical controls and industrial automation · Proficiency in AutoCAD Electrical and strong PLC/HMI programming experience · Deep understanding of UL, NEC, NFPA 70E, and electrical safety standards · Demonstrated success leading projects or contributing to complex custom machinery builds · Ability to mentor junior team members and drive design improvements · Background in electromechanical system design and manufacturing support What Makes This Opportunity Unique: · Privately owned and financially strong company with over 50 years of proven success · All engineering and manufacturing is done in-house at our US-based facilities · Recession-resistant with projects in food processing, water treatment, packaging, and more · Work directly on high-impact custom systems from design to completion · Short lead times and an integrated design-build process · Access to a seasoned engineering team for mentorship and collaboration · Competitive salary structure with performance bonuses · Opportunities for growth into technical leadership or project management · Continued access to learning and development in electrical, automation, and mechanical engineering · Team-focused culture that values practical problem-solving, quality, and innovation Traits That Set You Up for Success Here: · Detail-oriented and self-driven with a strong sense of accountability · Hands-on mindset and curiosity to understand how systems work · Enjoy working on one-off and custom systems that challenge your engineering creativity · Collaborative and open communicator, ready to share and receive feedback · Willing to dive into troubleshooting and help bring machines across the finish line · Honest, reliable, and committed to continuous improvement Take the Next Step in Your Career: If you are passionate about industrial electrical systems and automation, whether you are building your skills or bringing a wealth of experience, we want to hear from you. These roles offer the chance to work on meaningful projects with a stable, growing company where your contributions matter every day. Apply now to explore how you can be a part of building the next generation of industrial automation and electromechanical systems. Equal Opportunity Commitment: We and our client are equal opportunity employers and welcome all qualified applicants regardless of race, religion, gender, age, disability, veteran status, or any other protected classification.

Job Description Senior Electrical Engineer – AEC Industry Location: Hybrid | Midland Park, NJ or Goshen, NY Compensation: $115,000 – $160,000/year (commensurate with experience) Job Type: Full-time | W-2 | With Comprehensive Benefits Hybrid Schedule: 3 days onsite / 2 days remote (after 90-day in-office onboarding) Join LAN Associates: Award-Winning AEC Firm with 60 Years of Excellence! LAN Associates, Engineering, Planning, Architecture, Surveying, Inc. (LAN) is a top-rated, mid-sized, multi-disciplinary architecture and engineering (AEC) firm with a 60-year legacy in delivering high-impact building design solutions across commercial, educational, healthcare, hospitality, residential, and institutional markets. We are actively seeking a Senior Electrical Engineer to join our growing electrical engineering team. This role offers the opportunity to work on diverse, complex building projects while leading junior team members and collaborating with a multi-disciplinary project team. Key Responsibilities – Senior Electrical Engineer: * Lead, mentor, and develop junior electrical engineering staff * Plan, design, and coordinate electrical systems for various building projects in compliance with NEC, NFPA, IEEE, and other codes * Perform and review electrical calculations, including load calculations, voltage drop, short-circuit analysis, and equipment sizing * Prepare technical reports, specifications, and permit applications * Conduct quality assurance reviews of electrical design work and ensure accuracy of construction documents * Collaborate with architects, engineers, consultants, and clients throughout the project lifecycle * Participate in project meetings, including design reviews and construction coordination * Support construction administration including RFI responses, submittal reviews, and site visits * Contribute to proposal development and business development initiatives * Ensure project budgets, timelines, and scope are maintained Minimum Qualifications: * 7+ years of electrical engineering experience in the Architecture, Engineering, and Construction (AEC) industry * Bachelor’s degree in Electrical Engineering * PE license (preferred) or EIT with a path toward licensure (NY and NJ preferred) * Strong proficiency in AutoCAD; Revit experience a plus * In-depth knowledge of NEC, NFPA, IEEE, ANSI standards, and applicable building codes * Proven ability to read and interpret construction documents * Demonstrated experience in client-facing roles * Previous leadership or mentorship of junior engineers * Proficiency in Microsoft Excel and Word; load calculation software experience preferred * Valid driver’s license; willingness to travel locally (Tri-State area) up to 20% Preferred Qualifications: * 10+ years of experience in building electrical system design * Experience with electrical power analysis software (e.g., SKM, ETAP) * Revit proficiency for MEP systems coordination * Prior experience at a full-service architecture and engineering firm Why LAN Associates? LAN offers one of the best benefits packages in the AEC industry, designed to support your career growth and personal well-being: * Competitive salary + company performance bonuses * Employee-owned company | Stock options after 6 months * 100% company-paid Health, Dental & Vision Insurance (employee + family) * 401(k) with 3-5% company profit-sharing contribution * 15+ PTO days annually (increases with tenure) * 9 Paid Holidays + 1 Floating Holiday * Employer-paid Life Insurance, Disability, EAP & Wellness Programs * Continuing Education & Professional Development reimbursement * Mentorship, resource groups & internal leadership development * Pet insurance, voluntary benefits, and more! About LAN Associates: With over 130 professionals across offices in New Jersey, New York, and Pennsylvania, LAN delivers over $250 million in construction value annually. Our portfolio includes award-winning projects like The Vista at Christian Health, The Empty Sky 9/11 Memorial, and The Four Seasons Hotel expansions. We serve diverse markets including: * K-12 and Higher Education * Healthcare & Senior Living * Commercial & Mixed-Use * Hospitality * Government & Municipal Facilities * Faith-based & Nonprofits Our Core Values: Loyalty | Honesty & Integrity | Responsiveness | Innovation | Company Pride Alternate titles: Electrical Project Engineer | Electrical Design Engineer | Lead Electrical Engineer | Principal Electrical Engineer | MEP Engineer We are proud to be an equal opportunity employer. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Providing Engineering and Manufacturing solutions since 1955, Triangle specializes in the precision engineering and manufacturing of highly complex, tight-tolerance machined parts and assemblies. Triangle continues to thrive in more than 107,000 square feet over four state-of-the-art facilities at our Upper Saddle River, NJ campus. As a family-owned company, we foster a workplace that supports customer-driven, growth-oriented values and has a passion for surpassing expectations. We invest in our associates and create a supportive, team-based environment for learning, innovation, and advancement. Triangle is not only a family-run business; it's also a place where our associates feel like family. We believe in the same values and bring the same passion to our work each day to make a difference in people's lives. SUMMARY Responsible for the successful outcome of the development and implementation of the complete part-specific process by effectively translating the customer’s requirements to the company and suppliers, and adhering to the Quality Management System, all applicable regulations, and Lean Manufacturing principles. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Manages all aspects of the part-specific process, including resource planning, project timelines, and establishing priorities to ensure customer requirements and quoted standards are met., • Evaluates and improves process documentation protocols for engineering and manufacturing, as well as creates, updates, and maintains the item masters, bills of material, and routers, etc., • Reviews requests for quotes (RFQs) and helps determine the feasibility of projects, estimates labor and related costs, and prepares formal quotes for submission to customers., • Teams with customers to review designs for manufacturability and to understand the functionality of the part and its features, adds specifications as needed, and verifies GD&T was properly applied., • Clarifies, confirms, and correlates acceptance criteria with customers, company, and suppliers., • Develops manufacturing methods for new and existing projects by reviewing customer specifications and quality agreements, adhering to all applicable requirements, and effectively translating them into instructions., • Performs initial sourcing and qualifies suppliers from a technical perspective, as well as effectively communicates the customer requirements through training and auditing of the supplier’s performance on a regular basis., • Ensures product quality through the development and implementation of complete quality plans including CMM programming, gage design and procurement, and inspection plans., • Coordinates and/or performs validation activities (IQ, OQ, PQ) designed to qualify the equipment and the process as required., • Teams with the CNC Engineer to design work-holding devices and tooling as needed to ensure the desired outcome., • Investigates root cause of customer and/or supplier rejections and internal quality failures, dispositions non-conforming parts, recommends and implements effective corrective action as required, and provides accurate and timely responses to customers., • Determines the impact of ECNs on bills of material, routing, and spares, and coordinates any change., • Leads the post-production review and evaluation of the part-specific process, including equipment performance and product quality, recommends improvements, and coordinates their implementation., • Provides direction and on-the-job training to engineering and production associates regarding manufacturing methods and practices, as well as recommends, develops, and implements complete training programs, including materials and assessments., • Champions lean manufacturing principles by encouraging lean thinking in all aspects of development and production, as well as conducting and/or coordinating training and implementation with managers and associates., • Understands and complies with company policies, safety guidelines, quality system procedures, and housekeeping standards.Additional Duties and Responsibilities:, • Program, troubleshoot, and manage the Universal Robots arms., • Oversee the fixture designs, programs, prove outs, operation, and maintenance of the automated blasters., • Identify opportunities for automation within the organization and develop solutions to enhance productivity., • Collaborate with various departments to implement automation projects., • Ensure all automated systems comply with safety and quality standards., • Provide training and support to staff on the use of automated equipment. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience Bachelor’s degree from a four-year college or Manufacturing Engineer Certification and 8-10 years related experience and/or training; or equivalent combination of education and experience. Required Skills, Knowledge, and Abilities: • Ability to read, write, and speak English. Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or government regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, customers, and the general public., • Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Experience with computer applications, including word-processing, spreadsheets, graphs, databases, CAD, and presentations., • Experience with process capability, Gage R&R, and statistical techniques., • Experience in using basic and advanced measuring tools and equipment., • Applied knowledge of Geometric Dimensioning & Tolerancing (GD&T)., • Capable of working independently as well as collaborating and coordinating efforts with colleagues., • Ability to establish priorities and manage multiple activities and requirements in a changing, fast-paced environment., • Experience with manufacturing materials, manufacturing processes, and secondary processes., • Project management skills.Desired Skills, Knowledge, and Abilities:, • Advanced metrology (CMM programming, vision system, etc.)., • Lean/Six Sigma. Triangle is proud to be an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. Powered by JazzHR QvoSIKq1TI

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Senior Project Engineer – Performs & plans commissioning of electrical systems. Must be a self-motivated & energetic professional. Must have understanding of building electrical systems design & construction. Must have experience with commissioning process of electrical systems ranging in size, rating and complexity. The ideal candidate shall possess theoretical and practical knowledge in the commissioning, testing and troubleshooting of electrical systems and related controls. Candidate will be responsible for reviewing project information; coordinating and executing daily field activities; maintaining project documentation; assisting the Project Manager with schedule and planning of resources; and providing guidance to Project Engineers. May perform as team lead on small to medium sized projects. Will be expected to assess and test at a high technical level. This role requires the candidate to have technical competency, organizational skills, good communication skills, and to work well in a team environment where leadership is necessary. Primary Duties/Responsibilities: • Commission electrical distribution equipment and related controls, primarily in data center environments, including high voltage and medium voltage systems., • Review system designs for compliance with client facility goals., • Prepare plans and procedures for execution of the commissioning process., • Conduct commissioning activities from the design phase through the occupation phase, in accordance with client requirements and industry commissioning process best practices., • Attend factory testing of equipment and document procedures and results., • Conduct functional testing of equipment., • Perform analysis of test results using instrumentation and prepare reports., • Understand critical power quality requirements and test procedures., • Perform thermographic surveys and analyze results., • Fully document all field procedures including results, issues and observations either via company provided templates or online applications., • Report on system performance and make technical recommendations on issues., • Work with the Project Manager and project teams to coordinate and execute field activities., • Prepare and provide input on commissioning project documentation and schedules., • Draft comprehensive test procedures for a variety of equipment and systems., • Attend relevant project coordination and schedule meetings as necessary., • May be required to lead commissioning meetings or speak on technical topics., • Assist with submitting and maintaining daily commissioning reports., • Train and guide both Associate Project Engineers and Project Engineers on roles & responsibilities., • Respond to project team and client inquiries in a professional and timely manner., • Comply with company, client, and project safety requirements., • Be knowledgeable with building equipment, including, but not limited to:, • Generator, • Generator Paralleling Switchgear, • High / Medium / Low Voltage Transformer (XFMR), • Uninterruptible Power Supply (UPS Systems), • Battery Systems, • High / Medium / Low Voltage Switchgear (SWGR), • Low Voltage Main Switchboards (MSB), • PLC Control, • Automatic and Semi-Automatic Switching Controls, • Electrical Power Monitoring System (EPMS), • Automatic Transfer Switch (ATS), • Static Transfer Switch (STS), • Power Distribution Unit (PDU), • Busways, • Remote Power Panel (RPP), • Grounding Systems, • Hybrid Work Environment., • Travel nationwide 50% - 75% if not assigned locally; may have periods of higher travel expectation.Qualifications Education/Experience/Background: • Minimum of 7 or more years of experience in commissioning with mission critical project experience, or relevant and applicable industry experience., • Organized, detail-oriented, analytical, proactive, problem solver., • Good communication and relationship skills., • Effective written and verbal communication skills., • Ability to manage multiple tasks simultaneously, work with limited supervision and manage junior engineers on day-to-day tasks., • Knowledge & experience with ASHRAE or BCxA commissioning guidelines preferred., • Knowledge & experience with InterNational Electrical Testing Association (NETA) test specifications., • Distributed control system experience a plus., • Good understanding of building management systems (BMS) and/or electrical power monitoring system (EPMS)., • Deep understanding and application of test instrumentation., • Ability to walk up to 5 miles per day., • Carry up to 50 lbs., • Ability to wear required PPE daily. Additional Information Pay Range: $120000 to $140000 per year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job DescriptionProject Engineer - Data Center Construction - Wayne, NJ This opportunity is working directly with a leading mission-critical data center developer / wholesaler / colo provider. This company provides turnkey data center solutions custom-fit to the requirements of their client's ever-changing mission-critical facility's operational needs. They accomplish this by providing reliability of mission-critical facilities for many of the world's largest organizations (Hyperscale and Enterprise Customers). This opportunity provides a career-growth minded role with exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. We are looking for a Project Engineer for a Data Center Construction Project. The Project Engineer will be responsible to assist the Onsite Project Manager of the project with all aspects of managing a data center construction project. This will include providing leadership to contractors and vendors associated with the delivery of company projects. Project assignments for the most part will be regional. The candidate will have overall responsibility for the delivery of assigned projects on budget on time and assurance that the project scope and quality meet company design standards and the objectives set for the project. The successful candidate will have to be exceptionally organized and be great with back-office work (change orders, budgets, paperwork driven, etc.) Responsibilities: • Maintain liaison with various contractors and vendors in order to manage the day-to-day activities that impact the delivery of company's critical facilities construction projects, • Ensure that all day-to-day project responsibilities are met by the contractors and vendors on the project, • Assist the PM with the management of multiple projects simultaneously when needed, • Assist with creating and managing project schedules, • Assist the PM with project plans – size up, costs, budget, scheduling, timeline, manage change orders, etc., • Assists with reporting and RFPs to Contractors, • Deliver Built to Suit projects with a heavy emphasis on value-engineering, • Drive Company Standards uniformly as it regards to Project Delivery by all project participants on all projects, • Manage financial aspects of contracts (progress billing, rental equipment, income / expenses) to protect the company's interest and simultaneously maintain good relationship with the client, • Represent the company in project meetings, • Act as a Liaison with managers of all company departments, • Maintain all logs required to track the progress of the projectQualifications:, • Experience supporting Data Center Construction Projects as a General Contractor, • Minimum of 2-6 years relevant experience in the Data Center Construction Industry, • Client Facing / Client relationship / Client Management skills., • Must be familiar with the design process of building systems for data center and mission critical projects, • Solid Construction Project Management experience, • Effective Communicator – emails, phone and face to face, • Ability to work independently, • Solid Admin skills, • Experience writing / following MOPs and SOPs for critical MEP systems a HUGE plus, • Experience with Autodesk, REVIT, AutoCAD a HUGE plus, • Computer savvy: MS Project, P6 Primavera, Excel a plus After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Senior Electrical Engineer – AEC Industry Location: Hybrid | Midland Park, NJ or Goshen, NY Compensation: $115,000 – $160,000/year (commensurate with experience) Job Type: Full-time | W-2 | With Comprehensive Benefits Hybrid Schedule: 3 days onsite / 2 days remote (after 90-day in-office onboarding) Join LAN Associates: Award-Winning AEC Firm with 60 Years of Excellence! LAN Associates, Engineering, Planning, Architecture, Surveying, Inc. (LAN) is a top-rated, mid-sized, multi-disciplinary architecture and engineering (AEC) firm with a 60-year legacy in delivering high-impact building design solutions across commercial, educational, healthcare, hospitality, residential, and institutional markets. We are actively seeking a Senior Electrical Engineer to join our growing electrical engineering team. This role offers the opportunity to work on diverse, complex building projects while leading junior team members and collaborating with a multi-disciplinary project team. Key Responsibilities – Senior Electrical Engineer: * Lead, mentor, and develop junior electrical engineering staff * Plan, design, and coordinate electrical systems for various building projects in compliance with NEC, NFPA, IEEE, and other codes * Perform and review electrical calculations, including load calculations, voltage drop, short-circuit analysis, and equipment sizing * Prepare technical reports, specifications, and permit applications * Conduct quality assurance reviews of electrical design work and ensure accuracy of construction documents * Collaborate with architects, engineers, consultants, and clients throughout the project lifecycle * Participate in project meetings, including design reviews and construction coordination * Support construction administration including RFI responses, submittal reviews, and site visits * Contribute to proposal development and business development initiatives * Ensure project budgets, timelines, and scope are maintained Minimum Qualifications: * 7+ years of electrical engineering experience in the Architecture, Engineering, and Construction (AEC) industry * Bachelor’s degree in Electrical Engineering * PE license (preferred) or EIT with a path toward licensure (NY and NJ preferred) * Strong proficiency in AutoCAD; Revit experience a plus * In-depth knowledge of NEC, NFPA, IEEE, ANSI standards, and applicable building codes * Proven ability to read and interpret construction documents * Demonstrated experience in client-facing roles * Previous leadership or mentorship of junior engineers * Proficiency in Microsoft Excel and Word; load calculation software experience preferred * Valid driver’s license; willingness to travel locally (Tri-State area) up to 20% Preferred Qualifications: * 10+ years of experience in building electrical system design * Experience with electrical power analysis software (e.g., SKM, ETAP) * Revit proficiency for MEP systems coordination * Prior experience at a full-service architecture and engineering firm Why LAN Associates? LAN offers one of the best benefits packages in the AEC industry, designed to support your career growth and personal well-being: * Competitive salary + company performance bonuses * Employee-owned company | Stock options after 6 months * 100% company-paid Health, Dental & Vision Insurance (employee + family) * 401(k) with 3-5% company profit-sharing contribution * 15+ PTO days annually (increases with tenure) * 9 Paid Holidays + 1 Floating Holiday * Employer-paid Life Insurance, Disability, EAP & Wellness Programs * Continuing Education & Professional Development reimbursement * Mentorship, resource groups & internal leadership development * Pet insurance, voluntary benefits, and more! About LAN Associates: With over 130 professionals across offices in New Jersey, New York, and Pennsylvania, LAN delivers over $250 million in construction value annually. Our portfolio includes award-winning projects like The Vista at Christian Health, The Empty Sky 9/11 Memorial, and The Four Seasons Hotel expansions. We serve diverse markets including: * K-12 and Higher Education * Healthcare & Senior Living * Commercial & Mixed-Use * Hospitality * Government & Municipal Facilities * Faith-based & Nonprofits Our Core Values: Loyalty | Honesty & Integrity | Responsiveness | Innovation | Company Pride Alternate titles: Electrical Project Engineer | Electrical Design Engineer | Lead Electrical Engineer | Principal Electrical Engineer | MEP Engineer We are proud to be an equal opportunity employer. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Snipebridge, a strategic talent solutions company specializing in connecting exceptional talent to great career opportunities in the Architecture & Planning industry, is seeking a Supervising Engineer -Water Resources. Our client is an ENR Top 500 Design firm focused on geotechnical, environmental, water, ecological, and construction management services that has been delivering exceptional services for more than six decades. Their multidisciplinary team tackles intricate projects in diverse industries such as transportation, energy, infrastructure, and development. The firms long-standing commitment to technical excellence and client satisfaction has fueled their growth and success. They offer a collaborative and dynamic work environment where talented individuals can thrive and contribute to impactful projects. Position Summary This key position demands strong client-facing skills alongside the ability to lead and mentor staff-level engineers. A critical aspect of the role involves partnering with the firms dams/levees/water resources Practice Leaders to actively develop and expand our market footprint within New Jersey, New York, and Pennsylvania. Primary Responsibilities: • Supervising and scheduling geotechnical and structural engineering staff and providing technical direction and oversight., • Senior project management of interdisciplinary teams of geotechnical, structural, hydrologic/hydraulic, and civil engineers; to include, scheduling and supervising project meetings, producing and managing project schedules and budgets., • Managing and reviewing the preparation of construction plans and technical specifications., • Supervising and reviewing dam and/or levee safety inspections., • Providing leadership/mentoring to technical staff., • Managing and tracking budgets, creating project invoicing and Client follow-up, • Communicating effectively and efficiently with team members, clients and contractors., • Interacting with clients and regulatory agencies., • Preparing technical and cost proposals., • Supervising fieldwork including test borings and instrumentation installations and construction monitoring for dam and levee rehabilitation projects., • Providing data analysis, organization, and interpretation in support of dam/levee inspections, evaluations, and rehabilitations projects., • Executing and/or supervising engineering analyses including seepage and slope stability analyses of embankment dams and levees, drainage and filter designs, gravity dam stability analyses., • Writing and/or reviewing field reports, inspection/engineering reports, and permit applications. Education/Skills/Experience: • B.S. in Civil Engineering or related field of practice is required. Master’s Degree with a Geotechnical focus is a plus., • Professional Engineer license in NJ with the ability to obtain PE in NY and PA., • 15 to 20 years of experience in civil – geotechnical engineering, with direct involvement in dam safety inspections, condition assessments, subsurface exploration programs, engineering analyses, dam rehabilitation design, and regulatory permitting., • Experience completing projects with public sector/municipal agencies in New Jersey, New York and Pennsylvania is highly preferred., • Proven experience with design and development of engineering technical specifications, cost estimating and other related bidding documents., • Strong interpersonal skills and ability to speak publicly., • Solid project financial management skills; knowledge of production support systems and personal computer proficiency are all required competencies., • Experience in providing technical and project leadership to staff-level or junior engineers., • A strong background using various geotechnical computer software such as SEEP/W, SLOPE/W, and finite element analysis software such as PLAXIS are preferred., • Knowledgeable of dam and levee safety guidelines utilized by the U.S. Army Corps of Engineers, Bureau of Reclamation, Federal Energy Regulatory Commission, Natural Resource Conservation Service, and other Federal agencies, as well as State Dam Safety agencies. All applicants must be legally authorized to work in the United States without sponsorship and must already possess long-term work authorization.

Job DescriptionCompany Description Location: Lyndhurst, NJ (Head Office) Position Type: Full-time Salary: $10,000 (DOE) Position Overview: Hiring a CCTV Engineer to oversee and manage CCTV systems across all store locations nationwide. This role is primarily focused on planning, supervising vendor work, and standardizing CCTV processes and specifications. Job Description Key Responsibilities: * Oversee CCTV infrastructure for all Markets (installation and maintenance handled via external vendors) * Define CCTV equipment specifications and maintenance/replacement schedules * Supervise new CCTV installations and upgrades * Serve as the main liaison with third-party vendors Qualifications Qualifications: * Experience in CCTV or security system engineering or project coordination * Ability to manage vendors and communicate technical requirements * Strong organizational skills and attention to detail * Bilingual ability (English/Korean) preferred Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionYU & Associates' is currently searching for an Entry-Level Civil Engineer to join our site/civil department in our Elmwood Park, New Jersey location. The individual will be working on site and airport design, designing mixed-use developments, residential, higher education, and other exciting land development projects. This position will serve as a member of an integrated design team and be responsible for coordinating civil design along other disciplines, to meet project schedules and budgets, while working directly under licensed Engineers. Qualifications: • Bachelor's degree in civil engineering Required; master's degree Preferred., • EIT is strongly preferred., • Demonstrate basic proficiency with AutoCAD Civil 3D, have strong technical skills, and possess the ability to learn and apply new skills quickly and efficiently., • Proficiency with Microsoft Office software including Word, Excel, and Outlook is needed., • Knowledge of MicroStation is a plus., • You must demonstrate strong written and oral communication skills., • Committed to working efficiently to complete tasks under strict schedule restraints., • The ability to work independently or within a team environment., • You must be a self-starter with strong problem-solving skills., • Understanding of basic engineering theories and principles., • Understanding of basic practices of researching engineering and design issues, evaluating alternative, making sound recommendations., • Own transportation and a valid driver's license., • Field and office assignments, as required.We offer employees competitive compensation packages, medical/dental/vision, life insurance, short, and long-term disability, paid holidays, paid time off, and 401k retirement plan with company match. YU & Associates' is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees’ well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: · Benefits: • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program – based on individual and company performance., • Yearly review – based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation Powered by JazzHR y8x0MWginS

Job DescriptionAbout Weee! Weee! is the largest and fastest-growing ethnic e-grocer in the United States, operating in one of the largest underserved categories in retail with affordable access to exciting ethnic food. By partnering with local suppliers, redesigning the value chain and leveraging social buying, Weee! is reshaping the grocery business entirely. You can read more about us on Business Insider, Reuters and TechCrunch. Weee! is headquartered in Fremont, CA, and is currently available coast to coast with exceptional growth (5x YoY) across geographies, categories and ethnicities. We have raised $800M+ in funding to date from leading investors including Softbank Vision Funds, DST, Blackstone, Tiger Global, Lightspeed Ventures, Goodwater Capital, XVC and iFly. The opportunity now is to join a rocketship as we prepare for the next stage of growth, and an eventual public listing. This role is onsite 5 days a week in Clifton, NJ About the Role As a Field Process Engineer I at Weee, you will drive initiatives to optimize operational processes, improve efficiency, and deliver world-class customer experiences. This role requires strong analytical skills, project management expertise, and the ability to collaborate across multiple teams and stakeholders to execute scalable solutions in a fast-paced, dynamic environment. Responsibilities • Lead small-scale cross-functional projects focused on operational excellence and process improvement., • Partner with Central PE to identify and track operational metrics., • Collaborate with Operations, Supply Chain, and PE teams to implement solutions that improve workflow efficiency and reduce costs., • Identify and address basic root causes in current processes, create corrective action plans to achieve operational goals and ensure alignment with operational standards., • Help implement solutions and provide training to address operational challenges., • Conduct time studies and analyze data to identify trends, root causes, and opportunities for system and process improvement., • Collaborate with the central PE team and operation team to develop and maintain the standard operating procedures (SOPs) and work instructions., • Proactively mitigate safety risks within the production process, ensuring adherence to safety protocols., • Support warehouse daily operations as needed including 5S maintenance, equipment forecasting and management, • Bachelor's degree in Business, Operations, Supply Chain, Engineering, or a related field., • 1+ years of experience in internships or project management within operations, supply chain, or logistics., • Strong analytical skills with experience in data analysis tools (e.g. Advanced Excel)., • Understanding of basic concepts of lean manufacturing, continuous improvement, and Six Sigma, • Ability to work Individually with observation and analysis tools (e.g. DMAIC, fishbone diagram), • Excellent communication skills with the ability to present complex ideas clearly to both technical and non-technical audiences., • Proven ability to manage multiple priorities and work effectively in a fast-paced, ambiguous environment., • Ability to work under extreme temperatures(0~30°ree;F) in Freezer/Cooler environments, • Comprehensive health insurance package, including medical, dental, and vision. PPO/HMO packages, • 401k, 4% company match, • Equity and Bonus, • Vacation, sick and holiday time off, • Monthly mobile stipend, • The US base salary range for this full-time position is $63,000 - $74,000, • This role may be eligible to discretionary bonus, incentives and benefits Please note that the compensation details listed in US role postings reflect the base salary only, and do not include any variable compensation elements. Weee! is an equal opportunity employer welcoming all qualified applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status or any other basis prohibited by law. Discrimination or harassment of any kind is not tolerated at Weee!. If you need to inquire about an accommodation or need assistance with completing the application, please email us at . For more jobs and to find out more about Weee!, visit our career page: Softbank Vision Funds

Job Description Job Title: Project Engineer Company: PTI Tech Location: Clifton, NJ (On-site) Industry: Manufacturing / Metal & Plastic Injection Molding Experience Level: Mid to Senior Level About PTI Tech PTI Tech is a leading provider of advanced manufacturing solutions, specializing in precision metal and plastic injection molding for the aerospace, medical device, industrial, and defense industries. We are growing our technical team and seeking a skilled and motivated Project Engineer to support innovative product and process development efforts. Position Summary PTI Tech has an immediate opening for a Project Engineer to support the design and development of new products, components, and advanced manufacturing processes. This position plays a key role in PTI’s R&D and production programs, working closely with the Engineering Manager and cross-functional teams. Responsibilities include initial concept design, 3D modeling, analysis, prototyping, process development, vendor coordination, and supporting the implementation of novel engineering solutions. The ideal candidate is passionate about mechanical design, manufacturing innovation, and automation. We’re looking for a hands-on engineer with strong problem-solving skills, project leadership experience, and the ability to work effectively in a fast-paced, team-oriented environment. Key Responsibilities Design & Development • Develop production processes, tooling, fixtures, and manufacturing cells with a focus on quality and repeatability., • Perform technical and requirements analysis, researching new materials, technologies, and processes., • Apply DFM to assess part moldability and recommend design improvements for injection molding (plastic, metal, ceramic)., • Lead engineering projects from concept through production, coordinating cross-functional teams and external partners., • Create and manage project timelines, task assignments, and deliverables., • Write detailed work instructions, set up manufacturing equipment, and establish standard operating procedures (SOPs)., • Design and implement automation processes to increase manufacturing efficiency and consistency., • Program and troubleshoot Universal Robots and Arburg robotic systems., • Design and develop custom end-of-arm tooling for robotic automation., • Integrate automation systems into production workflows and support new product introductions (NPIs)., • Support ongoing production by resolving technical issues and improving part quality., • BS or MS in Mechanical Engineering, Materials Science, or related field., • Proficiency in CAD design using SolidWorks., • 5+ years of experience in mechanical design and development of injection-molded or over-molded parts and assemblies., • Strong knowledge of DFM, injection molding (plastic/metal), tool and mold design, and automation integration., • Experience with machine shop processes: turning, milling, EDM, and CNC machining., • Fluent in interpreting engineering drawings and applying GD&T., • Strong project management and organizational skills., • Experience in aerospace, medical device, defense, or industrial sectors., • Familiarity with additive manufacturing., • Experience with process validation, lean manufacturing, and quality systems., • Program management experience is a plus. Company DescriptionEngineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 37-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it. PTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.Engineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 37-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it.\r\n\r\nPTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.

Job DescriptionThe Project Manager will be in charge of supervising the development of complex projects while observing pre-determined conditions (cost, quality, safety, timelines). The Project Manager will participate in defining the project's specifications, planning its implementation and drawing up its budget. They will be involved with both technical and financial aspects and coordinate the work of the various participants involved. Ensure that the development methods, timelines and costs are observed during each phase of the process. Serves as a primary contact for our clients and is responsible for ensuring that the contracted services are provided in a timely and professional manner. Has overall responsibility for all aspects of, and the success of, all assigned projects. Responsibilities: • As the project progresses the project manager will be responsible for identifying unanticipated tasks that can increase the cost of the project or delay meeting the assigned schedule., • The project manager will monitor the progress of the project; Interprets, organizes, executes, and coordinates assignments., • The project manager will establish the project budget, track the actual project expenditures against the forecast expenditures and will implement corrective action as needed. The project manager will prepare cost to complete estimates to determine whether the project can be completed within the assigned budget., • The project manager will be responsible for assuring that all internal project quality assurance procedures are followed., • Applies a thorough knowledge of current principles and practices of engineering as related to the variety of aspects affecting the firm., • Supervises a staff of engineers and technicians., • Plans, schedules, or coordinates the preparation of documents or activities for multiple major projects., • Responsibilities may include marketing, budgeting, financial managements, schedule coordination and resources allocation., • Performs preliminary engineering design and/or reviews the design and drafting work of staff or project engineers, CAD operators., • Coordinates work with other engineers and professionals within and outside own discipline, and with support services staff., • Assisting in company-wide business development in all disciplines of the firm’s practice.Qualifications:, • Master’s degree in engineering from an accredited college or university., • Registered Professional Engineer in New Jersey or New York., • Possess 8+ years of engineering management experience., • Proven ability to identify, develop and mentor talent., • Excellent listening, written and oral communication skills., • Effectively manage projects from concept through completion., • Proven leadership and decision-making skills., • Strong attention to detail with excellent analytical and judgment capabilities., • Establish a vision and create an environment for excellence., • Demonstrated record of ethics and high standards.Strong technical writing, communication skills and interpersonal skills are expected at this level, proven through technical presentations, technical papers and/or participation in technical committees. We offer employees competitive compensation packages; benefits packages; life insurance, short/long term disability insurance; and 401K retirement plan with company match. YU & Associates' is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees’ well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: · Benefits: • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program – based on individual and company performance., • Yearly review – based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation rU5jzp7Ihr

Job DescriptionMunicipal Engineer Company: Westbrook Project Solutions (on behalf of our client) Location: New Jersey Terms: Direct Hire Reports To: Client Project Leadership Schedule: Full-time Compensation: $85,000 – $150,000 (salaried) Benefits: Comprehensive package including health insurance, PTO, Profit Sharing, 401(k), and bonuses Work Location: In Office or Job Site About Westbrook Project Solutions Westbrook Project Solutions (WPS) is a construction and engineering talent solutions firm serving clients across the Mid-Atlantic and Northeast. We partner with general contractors, developers, and public agencies to provide experienced professionals who deliver projects on time, on budget, and to the highest standards of safety and quality. We are currently seeking a Municipal Engineer for one of our municipal and infrastructure clients in Wayne, New Jersey. This individual will play a key role in the design, planning, and oversight of public infrastructure projects that improve community functionality and sustainability. Job Overview The Municipal Engineer will lead and support the planning, design, and construction of municipal infrastructure projects, including roads, bridges, water systems, and other public works. This role requires strong technical skills, attention to detail, and the ability to collaborate across multiple stakeholders—including contractors, engineers, and public agencies—to deliver innovative, cost-effective, and sustainable infrastructure solutions. Job Responsibilities * Develop and implement engineering plans for municipal infrastructure projects (roads, bridges, stormwater, and water systems) * Perform detailed design calculations and prepare plans, specifications, and technical reports * Oversee and inspect construction projects to ensure compliance with design standards, quality, and safety requirements * Collaborate with contractors, engineers, and municipal agencies to achieve project milestones and objectives * Prepare cost estimates, bid documents, and contracts for construction projects * Review shop drawings, change orders, and progress reports * Maintain accurate documentation for all assigned projects * Provide technical support and consultation to municipal staff, contractors, and community stakeholders * Participate in project meetings, public hearings, and client presentations * Ensure compliance with local, state, and federal design standards and environmental regulations Skills & Experience * Bachelor’s degree in civil engineering or a related field * EIT or New Jersey Professional Engineer (PE) license preferred * Minimum of 4 years of experience in the design and construction of municipal infrastructure projects * Strong technical proficiency in AutoCAD, GIS, and engineering design software * Experience working with local and state government agencies * Excellent project management, communication, and coordination skills * Proven ability to manage multiple projects simultaneously and meet deadlines * Strong understanding of design codes, regulations, and project documentation standards EEO Statement Westbrook Project Solutions is an equal opportunity employer. We are committed to fostering a workplace that values diversity, inclusion, and equal access to opportunity. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity or expression, age, national origin, disability, veteran status, or any other characteristic protected by law. We encourage applications from all qualified candidates, including those from historically underrepresented groups in engineering and public works.

Job Description Public Safety RF Engineer Location: Clifton NJ Description C Squared Systems, LLC is an RF engineering, consulting, and software development company specializing in providing services for seamless wireless coverage from RF analysis to design and implementation of DAS systems and Wi-Fi networks to remote monitoring and management of complex multi-vendor environments. Site Portal®, a customizable Web-based software, was engineered by C Squared Systems to remotely monitor and manage these complex multi-vendor environments. Since 1999, C Squared Systems has executed turnkey in-building wireless solutions using state-of-the-art analysis tools to deliver RF solutions that exceed project scope and customer expectations. Our experience, technical expertise, and diverse projects in the wireless realm have allowed C Squared Systems to continually evolve as new technologies are developed and the demands of our customers change. C Squared Systems is currently seeking a Public Safety RF Engineer responsible for public safety system engineering functions relating to RF/Wireless communications pertaining to In-Building and outdoor, passive and active (Distributed Antenna System) systems. The incumbent will work hand in hand with senior public safety RF engineers in various aspects of DAS design, installation, commissioning, testing, troubleshooting and remote monitoring. The incumbent will also perform various operational support functions such as parts procurement, equipment repair/return, inventory, and documentation. Domestic travel will be expected approximately 25-50% of the time, with the majority of that being within the Greater New York area, but does include other markets as needed. Primary Responsibilities: • Design of Radio Frequency (RF) wireless communication systems and technology, • Experience working with large county or statewide P-25T, P-25C, and analog systems, • Develop Request for Information (RFIs) and Requests for Proposals (RFPs) evaluate solutions, manage implementations, and perform Independent Verification & Validation, • Coordinating with AHJ’s, FCC License holders, Carriers, End Users, Facility Managers, and Equipment Vendors, • Supporting the efforts of our technicians and engineers and directly supporting customers, • Ensuring customer satisfaction, • Work hands on with system components such as antennas, fiber optics, coax, and RF amplifiers and receivers, • Radio Frequency Exposure Studies, Intermodulation and Interference Analysis, • Multi-task projects on a day-to-day basis, • Travel to various job sites within Greater New York and other markets., • Strong background in public safety wireless communications, • Experience working with large county or statewide P-25T, P-25C, and analog systems, • Experience with RF Coverage modeling, RF design, and optimization, • Experience with LMR site equipment configuration and test, • Experience in land mobile radio, project management skills, knowledge of database reporting tools., • Familiarity with Public Safety organization operations, • Knowledge of other wireless technologies such as TETRA, GSM, UMTS, CDMA, WiFi, LTE and embedded systems, • Knowledge of microwave, circuit based, and fiber backhaul., • Knowledge of IP-based dispatch consoles and voice recorders, • Professional level certification in Wireless Communications (e.g., ETA, CWNA, Microsoft Wireless Communications Engineering Technologies, GROL Certification), • Experience or familiarity with radio frequency devices and/or systems is highly desirable., • Experience troubleshooting public safety DAS systems including ADRF, Comba, Zinwave, etc., • Familiar with the basics of IP Networking, • Multifaceted Professional capable interfacing with customers, • Proficient in basic computer applications (MS Outlook, MS Word, MS Excel, etc.), • Ability to learn quickly and understand technical materials, • Ability to shift gears quickly as priorities change, • A solid understanding of fundamental engineering principles and the ability to effectively work on multiple engineering projects simultaneously, • Requires knowledge of radio frequency and fiber optic communication technology, • Must be able to work effectively within a diverse work force including engineers, project managers, skilled craft workers, consultants, customers, and regulatory agency personnel, • Must have strong interpersonal and communications skills to be able to effectively communicate complex issues with peers, supervisors, and managers. Must be authorized to work in the US, be willing to travel up to 50%, have a clean driving record and be able to pass a company background check., • A minimum of a bachelor’s degree, preferably in electrical engineering or similar discipline with at least 5 years Land Mobile Radio (LMR) engineering experience. Master’s degree preferred. An equivalent combination of advanced education, training, and experience will be considered.

Job Description Why Join This Team? This isn't just another multi-disciplinary engineering firm—it's a dynamic, people-first organization where innovation is sparked by individuality. With over 50 years of success and a spot on the ENR Top 500, our client is known for cultivating a supportive, engaging, and empowering work environment. Team members take pride in their projects, are encouraged to grow professionally, and enjoy a strong culture of mentorship and collaboration. If you're looking to make a meaningful impact on public and private sector projects—while being surrounded by passionate professionals who truly value your contributions—this is the opportunity for you. Position Overview Targeted HR Consulting is recruiting a Project Engineer to join a growing Newark-based team focused on land development and municipal infrastructure projects. This full-time, in-office role offers the chance to lead complex civil engineering designs and work across markets including public works, private development, and utilities. We're seeking a confident professional with at least 8 years of experience, strong technical acumen, and the ability to mentor junior staff while coordinating multidisciplinary projects. Key Responsibilities * Manage multiple land development and municipal projects, maintaining schedules and budgets * Serve as primary client contact, including attending regular meetings and supporting proposals * Prepare technical design drawings, specifications, and reports from schematic through construction * Oversee permitting processes with local and state regulatory agencies * Guide and mentor junior engineers and drafters on stormwater, utility, and erosion control design * Coordinate tasks across engineering disciplines and monitor deliverables for quality and timeliness Required Qualifications * Bachelor's degree in Civil Engineering or related discipline * 8+ years of professional experience in civil/site design or land development * Professional Engineer (PE) license in NJ (or ability to obtain within 6 months) * Strong working knowledge of site layout, grading, stormwater management, erosion control, and permitting * Proficient with engineering design tools (AutoCAD Civil 3D preferred) and office software (MS Office 365, Adobe, etc.) * Strong communication and leadership skills * Local candidates only – relocation is not provided * Must be authorized to work in the US without work visa sponsorship Preferred Qualifications * Certifications such as CME, CFM, or PP * Project management or multi-discipline coordination experience * Familiarity with Hydrology & Hydraulics (H&H) modeling tools * Experience using Bluebeam Revu Full Benefits Package Includes * Employee Stock Ownership Plan (ESOP) * Medical, Dental, and Vision Insurance * Life, Short- and Long-Term Disability Insurance * Paid Time Off and Holidays * 401(k) Retirement Plan * Tuition Reimbursement * Flexible Spending Accounts (FSA) * Employee Assistance Program (EAP) Apply Now If you're a local Project Engineer ready to take the next step in your career, we'd love to hear from you. Targeted HR Consulting is proud to partner with forward-thinking engineering firms to match top talent with exciting career opportunities.

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Senior Project Engineer – Performs & plans commissioning of mechanical systems. Must be a self-motivated & energetic professional. Must have understanding of building mechanical systems design, construction & operation. Must have experience with commissioning process of mechanical systems ranging in size, rating and complexity. The ideal candidate shall possess theoretical and practical knowledge in the commissioning, testing and troubleshooting of mechanical systems and related controls. Candidate will be responsible for reviewing project information; executing daily field activities; maintaining project documentation; assisting the Project Manager with schedule and planning of resources, and providing guidance to Project Engineers. May perform as team lead on small to medium sized projects. Will be expected to assess and test at a high technical level. This role requires the candidate to have technical competency, organizational skills, good communication skills, and to work well in a team environment where leadership is necessary. Primary Duties/Responsibilities: • Commission mechanical, plumbing & fire alarm and suppression equipment and related controls, primarily in data center environments., • Review system designs for compliance with client facility goals., • Prepare plans and procedures for execution of the commissioning process., • Conduct commissioning activities from the design phase through the occupation phase, in accordance with client requirements and industry commissioning process best practices., • Attend factory testing of equipment and document procedures and results., • Conduct functional testing of equipment., • Perform analysis of test results using instrumentation and prepare reports., • Fully document all field procedures including results, issues and observations either via company provided templates or online applications., • Report on system performance and make technical recommendations on issues., • Work with the Project Manager and project teams to coordinate and execute field activities., • Prepare and provide input on commissioning project documentation and schedules., • Draft comprehensive test procedures for a variety of equipment and systems., • Attend relevant project coordination and schedule meetings as necessary., • May be required to lead commissioning meetings or speak on technical topics., • Assist with submitting and maintaining daily commissioning reports., • Train and guide both Associate Project Engineers and Project Engineers on roles & responsibilities., • Respond to project team and client inquiries in a professional and timely manner., • Comply with company, client, and project safety requirements., • Be knowledgeable with Mechanical, Plumbing & FLS building systems & equipment, including, but not limited to:, • Air Cooled Chiller, • Water Cooled Chiller, • Cooling Tower, • Direct Evaporative Cooling System, • Air Handling Unit, • Computer Room Air Conditioning Unit, • Process Water Plants, • Boilers, • Fuel Systems, • Backup generators, • Gas turbines, • Reciprocating engines, • Steam turbines, • Selective catalytic reduction systems, • Fan Coil Unit, • DX Split System, • Fan Array, • Chemical Injection System, • Variable Frequency Drive, • Variable Refrigerant Volume System, • Rooftop Unit, • Variable Air Volume Unit, • Makeup Air Unit, • Hydronic Pump, • Leak Detection, • Heat Trace, • DDC & PLC Controls, • Fire Pumps & Controller, • Pre‐Action Fire Suppression System, • Fire Alarm Control Panel, • VESDA System, • Travel nationwide 50% - 75% if not assigned locally; may have periods of higher travel expectation., • Hybrid Work Environment.Qualifications Education/Experience/Background: • Minimum of 7 or more years of experience in commissioning with mission critical project experience, or relevant and applicable mechanical and/or controls experience., • Organized, detail-oriented, analytical, proactive, problem solver., • Good communication and relationship skills., • Effective written and verbal communication skills., • Ability to manage multiple tasks simultaneously, work with limited supervision and manage junior engineers on day-to-day tasks., • Knowledge & experience with ASHRAE or BCxA commissioning guidelines preferred., • Distributed control system experience a plus., • Good understanding of building management systems (BMS) and/or electrical power monitoring system (EPMS)., • Deep understanding and application of test instrumentation., • Team player and a “client-first” mentality., • Ability to walk up to 5 miles per day., • Carry up to 50 lbs., • Ability to wear required PPE daily. Additional Information Pay Range: $120000 to $140000 per year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description Commissioning Engineer - Wayne, NJ Our client is a Engineering Design and Commissioning Company that is a leader in the data center space. They provide design, commissioning consulting and management expertise in Data Center / Mission Critical Facilities Space with the mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation, and Hyperscale Data Center Projects. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. Execute onsite commissioning plans, provide and gather specifications, and execute assignments in a multidisciplinary engineering Commissioning role for large facility projects. The commissioning experts adhere to a thorough quality management - QM /QA / QC process and procedures that validate and document our client's systems. Commissioning methodology covers a wide range of procedures to verify the integrity and performance of their customer's mission critical support infrastructure. Responsibilities: • Participate in daily commissioning activity meetings which services include:, • Equipment pre-start-up and start-up procedures; Development of standard operating procedures (SOP's) and Methods of Procedures (MOPs); Comprehensive Commissioning documentation, • Prepare commissioning test procedures and reports; Develop and maintain commissioning logs, equipment checklist, and other tools to track commissioning projects; Write comprehensive reports which include the following sections: recommendations for optimizing building operations, functional checklists, list of deficiencies, equipment operation and maintenance manuals, • Review design criteria, specifications, drawings, equipment submittals, and other documentation pertinent to commissioning, • Integrated system testing; Load Bank Testing; Compilation of all testing procedure results, • Develop and administer functional tests for various systems, such as: electrical distribution systems, UPS, standby generators, etc., • System Assembly; Commission plan preparation ; Follow company QC process and procedures, • Help lead and manage any external resources; Schedule and direct periodic commissioning meetings; Attend construction and coordination meetings if required for the project ;, • Interface with clients, contractors, equipment vendors and owners agents as needed; Execute project assignments; Interface with project contractors, vendors, and testing technicians; Interact with all facets of the company: engineering, design, etc., • 2-5+ years experience with Data Center Commissioning, • Bachelor's / Associates Degree as an Electrical Engineer a plus, • Experience commissioning enterprise data centers, colos, and hyperscale companies, • A/E experience working in complex facilities or mission critical projects a big plus, • Previous Data Center / Mission Critical experience a must, • Excellent communication skills, both written and verbal (this role requires heavy amount of writing, documentation, and client interaction), • Equipment testing experience in a Critical Facilities / facility environment, • Previous experience conducting Level 1-5 Commissioning, • Possess basic knowledge of systems design for various projects, • Possess basic knowledge of systems design for various projects, • Experience using Microsoft Word, Excel, and Microsoft Project After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Ignite Your Career: Sales Estimator Are you a precision-focused construction pro with a keen eye for detail and the persuasive chops of a top-tier salesperson? We're not just looking for an estimator; we're seeking a dynamic deal-closer—a Sales Estimator to be the architect of our profitable growth. This is a high-impact, professional role where your technical expertise in complex estimating meets your ability to forge lasting customer relationships and secure high-value sales. If you're ready to use your deep estimating experience to master project specifications, drive technical sales, and directly impact our bottom line, join our team! Your Mission: Estimating & Sales Execution You will serve as the crucial link between project scope and profitable execution, utilizing a powerful combination of technical mastery and commercial savvy. 1. Strategic Project Analysis & Bidding: • Decipher the Blueprint: Conduct an exhaustive study, evaluation, and understanding of complex job plans, construction specifications, and technical scope documents., • The Precision Take-Off: Lead the charge in preparing meticulous take-offs and estimates by researching all contracts, job specifications, and schematic drawings. Your estimates will be the foundation for project success, accounting for material, labor, logistics, and ensuring alignment with company profit policies., • Secure the Win: Prepare the final, compelling quote and deploy your sales acumen to aggressively secure the sale, transforming estimates into awarded contracts., • Public Sector Scout: Proactively research and identify public bid opportunities for lucrative government and municipal projects., • Doubt Destroyer: Submit any necessary Requests for Information (RFIs) to the job owner to ensure absolute clarity and a risk-free quote. 2. Product & Process Command: • Technical Guru: Maintain a deep, up-to-date knowledge of the company's products, services, and technical capabilities, including materials, specifications, functionality, and assembly requirements., • Estimation Integrity: Rigorously document all estimating logic, technical details, and analysis using MS Excel or industry-standard estimating software., • Continuous Insight: Monitor overall sales and product trends to quantify the value and market position of various product lines. 3. Sales, Customer Focus & Account Leadership: • Relationship Architect: Establish personal rapport with direct decision-makers and their technical staff within customer, contractor, and government agencies., • High-Touch Service: Serve as the primary point of contact, expertly responding to customer inquiries, issues, and complaints to ensure complete, raving satisfaction. Proactively manage product returns, replacements, and project scope changes., • Key Account Steward: Manage key account relationships with surgical precision to maximize retention of existing business and aggressively pursue new business opportunities., • Bid Agility: Quickly revise bid documents to accurately reflect any changes in project scope, materials, or technical requirements. 4. Interdepartmental Synergy: • Procurement Partner: Collaborate closely with the Purchasing team for the most efficient and cost-effective procurement of required materials, considering vendor performance, competitive pricing, and critical product certifications., • Logistics & Finance Coordinator: Seamlessly coordinate with internal Warehouse and Accounting departments to ensure accurate inventory levels, timely delivery schedules, and smooth payment processing. What You Bring: The Winning Profile • Elite Construction Estimating Experience: At least four to six years of successful, hands-on experience in construction, manufacturing, or a related technical estimating position with direct exposure to complex projects., • Degree of Distinction: Bachelor’s Degree in Construction Management, Engineering, Manufacturing, or a related technical field is highly preferred., • Sales & Service Power: A minimum of two years of successful experience in sales and customer service within a commercial B2B or B2G sales model., • Estimating & Pricing Mastery: Expert, demonstrable knowledge of construction estimation methodologies, quotation protocol, and advanced pricing strategies., • Blueprint Proficiency: Exceptional ability to read, comprehend, and interpret detailed specifications and trade drawings to fully understand the complete spectrum of job requirements., • Independent Drive: Proven capacity to develop and optimize personal procedures and processes for efficiently managing and completing high-volume work assignments., • Technical Toolkit: Advanced proficiency with MS Office applications (especially Excel for complex calculations) and strong familiarity with CRM software. Intelligent Traffic Supply Products, LLC (ITSP) is the leading specialized provider for modernizing New Jersey's roadways. We don't just supply traffic equipment—we engineer and deliver the precision components that form the backbone of Intelligent Transportation Systems (ITS) across the state. We specialize in the expert assembly and distribution of custom-built, high-specification traffic control solutions for a rapidly expanding base of municipal clients. Our comprehensive suite of products is crucial for building safer, smarter, and more efficient urban environments. It includes: At ITSP, we are dedicated to building the future of New Jersey's traffic flow, one smart solution at a time.Revitalized Company Overview: Intelligent Traffic Supply Products, LLC\r\n\r\n\r\n\r\nIntelligent Traffic Supply Products, LLC (ITSP) is the leading specialized provider for modernizing New Jersey's roadways.\r\n\r\nWe don't just supply traffic equipment—we engineer and deliver the precision components that form the backbone of Intelligent Transportation Systems (ITS) across the state. We specialize in the expert assembly and distribution of custom-built, high-specification traffic control solutions for a rapidly expanding base of municipal clients.\r\n\r\nOur comprehensive suite of products is crucial for building safer, smarter, and more efficient urban environments. It includes:\r\n\r\n* Advanced Control Systems: Cubic ITS signal controllers and sophisticated system communications equipment.\r\n* Infrastructure Components: Traffic signal assemblies, durable traffic poles, and assorted hardware and software.\r\n* Detection & Safety: Cutting-edge pedestrian and vehicle detection technology, and complete pedestrian crosswalk systems.\r\n\r\nAt ITSP, we are dedicated to building the future of New Jersey's traffic flow, one smart solution at a time.

Job Description Municipal Engineer Full Time | Wall | Camden | Newark, NJ, US Who We Are At FPA, we are looking for talented and driven professionals to join our commitment to pushing the boundaries of what is possible and providing cutting-edge solutions that make a difference in people's lives. We value individuals who are passionate about their work, who are committed to delivering quality results, and who are eager to learn and grow with us. We value candidates of all backgrounds, experiences, skill sets, and walks of life. At FPA, we actively foster a work environment that promotes inclusion and diversity, which is embedded in the foundation of our practice through policies, training, local partnerships with professional and diverse organizations, internal networks, and leadership support. We offer a dynamic and collaborative work environment where employees are encouraged to share ideas, take on new challenges, and contribute to the success of the company. As an FPA employee, you will have the opportunity to achieve anything you set your mind to, and to help shape the future. If you are a motivated individual who is looking for an exciting and rewarding career opportunity, we encourage you to apply to be a part of a dynamic and inclusive community of professionals. This Opportunity FPA is currently searching for a full-time Municipal Engineer – Wall, Camden or Newark, New Jersey Office. We are actively seeking an experienced municipal engineer with a minimum of five (5) years of experience in infrastructure development inclusive of road improvements, utilities, and public works projects, adept at planning, identifying funding programs, obtaining permits, designing, assisting with public bidding, and providing engineering services during construction for a wide range of municipal or other public projects. Demonstrated leadership in coordinating with stakeholders to deliver cost-effective, sustainable solutions, leveraging innovative technologies for project optimization, and contributing to resilient community advancement. At FPA, our unwavering commitment to dedicated service and innovative solutions has empowered us to build thriving communities and expand our horizons. The ideal candidate will work alongside other talented engineers from various disciplines, collaborating to design, develop, and deliver projects that make a real difference in people's lives. They will bring a fresh perspective, a passion for engineering, and a commitment to excellence. Joining our team will provide you with an excellent opportunity to unlock your full potential, gain invaluable experience, and create a meaningful impact on the world. Core Responsibilities • Performs office and field engineering work involved in the planning, scoping, designing, permitting, and rehabilitating or constructing roads, intersections, streetscapes, site/civil improvements, water supply systems, sanitary sewer collection and conveyance, stormwater management, parks and recreation facilities, public buildings, and grounds improvements., • Familiar with New Jersey Administrative Codes, Local Public Contracts Law, and Municipal Land Use codes and regulations., • Experience with client and stakeholder engagement, and providing customer service in a professional, technical, and timely manner., • Familiar with Planning and Zoning regulations, requirements and protocols and procedures, • Able to perform calculations, prepare graphs, tables, and curves, and prepare letters, memoranda, and reports., • Review and compile information from technical engineering manuals and reports to develop solutions., • Prepare conceptual, preliminary, and detailed design drawings on routine projects from surveys, specific instructions, notes, sketches, and other reference material., • Review developer applications from land use boards, site plans, subdivision plans, stormwater calculations, and grading plans for compliance with Municipal codes and standards, county, state, and federal regulations (as applicable), and conducts business in accordance with best engineering practice., • Prepare development bond estimates, determine inspection fees, schedule inspection staff, monitor status of bonds, review bond reductions / releases, and perform administrative duties related to land development projects., • Oversee preparation and maintenance of municipal maps, record drawings, and other official records., • Assist with preparation of resolutions, ordinances, ordinance amendments, assessments, memoranda, reports, presentations, and public correspondence., • Familiar with pavement and other infrastructure evaluations and preparation of management reports, cost estimates and schedules., • Familiar with NJDEP (and other state regulatory agencies as applicable) rules and regulations inclusive of Tier A MS4 stormwater permits and annual compliance requirements., • Responsible for the coordination and management of multiple tasks and projects simultaneously., • Ability to evaluate and review challenging engineering matters in office or field and to develop appropriate solutions and remedies using innovative ideas and creative thinking., • Ability to prepare clear, technically sound, and informative reports, statements, findings, and recommendations., • Ability to establish and maintain effective working relationships with public officials, clients, employees, regulatory agencies, consultants and partners, utility companies and the public., • Bachelor of Science Degree in Civil or Environmental Engineering, or a related field, from an ABET accredited four-year college or university., • Five (5) plus years of related Civil Engineering work experience serving municipal, county or state governments, and other public agencies., • Licensed Professional Engineer (NJ, NY and/or PA) or ability to acquire PE through reciprocity., • Excellent problem-solving skills and a willingness to learn., • Strong communication and interpersonal skills., • Organizational skills related to office records, field documents, and correspondence., • Ability to work effectively in a team and adapt to a dynamic work environment., • A passion for contributing to environmentally sustainable solutions and familiar with the seventeen (17) world Sustainable Development Goals., • Thorough knowledge of the principals, practices, modern methods, techniques of civil engineering related to preparing plans, specifications, designs for and inspection of public improvement construction projects., • Comprehension of hydraulic analysis and design pertaining to water, sanitary sewers and storm sewer systems and hydraulic modeling experience a plus., • Detailed knowledge of Municipal Land Use Law, Local Public Contracts Law, NJDEP regulations, NJDOT standards, AASHTO, and MUTCD., • Fundamental knowledge of ESRI GIS systems and proficiency in AutoCAD Civil 3D design and drafting plans., • Certified Municipal Engineer (CME) certification through the NJ Municipal Engineering Institute., • Master of Science Degree in Civil or Environmental, or a related field, from an ABET accredited college of university. As a valued member of our team, we provide you with a flexible benefits package that reflects our respect for your workplace contributions, professional goals, and personal priorities. FPA offers an extensive range of benefits, including medical, dental, vision, disability, life, and retirement savings, aimed at ensuring the physical well-being and financial security of employees throughout their careers. The personal benefits program at FPA includes the following: • Medical, Dental, Vision insurance, • 401(k) Retirement Plan with Employer Matching & Roth 401(k) Option, • Individual and Dependent Life Insurance, • Short and Long-Term Disability Insurance and Supplemental Insurance Plans, • Employee Assistance Program (EAP) and Wellness Benefits, • Tuition Reimbursement, • Training and Professional Development, • Corporate sponsored events, outings & activities, including community outreach opportunities., • Competitive Personal Time Off Program (PTO), • Transit/Parking Program, • Summer Hours, • Employee Discounts The projected compensation range for this position is $115,000 to $175,000. Actual compensation will depend on factors such as experience, education, skill set and location. About FPA Since 1974, French & Parrello Associates (FPA) has partnered with clients to address the ever-changing challenges of the world around us. Nationally and locally ranked among Engineering News - Record’s Top Firms, FPA has the staff and resources to provide innovative engineering services to clients in both the public and private sectors across a growing network of locations in New Jersey, New York, Pennsylvania, and Georgia. From modernizing the aging infrastructure, to designing state-of-the-art facilities and serving as stewards to our environment, FPA improves quality of life. At our core, we are a dedicated group of professionals focused on servicing our clients and improving our world. Our team’s technical resources include site/civil, water, wastewater, water resources/dams, geotechnical, structural, bridge, highway, mechanical and electrical engineers, licensed land surveyors and landscape architects, as well as environmental professional and LSRPs, materials testing technicians, and construction oversight professionals and technicians. Our ability to service our clients is bolstered by a highly motivated team of marketing, business development, accounting, information technology, and administrative staff. Our professionals’ daily contributions play a crucial role in achieving client objectives, meeting goals, and improving our world.

Job Description T&M Associates is looking for a highly motivated Civil Engineer to join our Land Development team. The ideal candidate will have experience in technical design and project management roles focused on Land Development in New Jersey (experience in NYC is a plus). The successful candidate will possess expertise in zoning analysis, site design & layout, grading & drainage design, utility layout, stormwater management, soil erosion and sediment control, flood hazard design, and relevant local, regional, and state regulations. This position offers a hybrid work arrangement, combining remote work with in-office collaboration. Key Responsibilities: • Oversee the day-to-day operations of the group in collaboration with the Department Manager, Regional Market Leader, and other key stakeholders., • Manage projects for core clients, ensuring on-time delivery, budgets, regulatory compliance. Responsibilities include project scheduling, budgeting, invoicing, and proposal preparation., • Bachelor’s degree in Civil Engineering or a related field is required., • Professional Engineer (PE) License is required (NJ or NY license preferred)., • 8+ years of experience in land development, including expertise in zoning analysis, land planning, grading, drainage, utility layout, stormwater management, and other related areas. Experience with NJDEP & NJDOT permitting., • Proficiency with AutoCAD, Civil3D, and stormwater modeling software., • Proven experience in technical, project, and client management roles., • Strong leadership capabilities with experience supervising, mentoring, and developing junior staff., • Exceptional project management skills, including planning, scheduling, budgeting, and task delegation., • Ability to work both independently and collaboratively in a fast-paced environment. T&M Associates offers a competitive and comprehensive benefits package designed to support the health, well-being, and professional growth of our employees. Benefits include comprehensive insurance (medical, dental and vision), a 401(k) with company match, paid time off, flexible work schedules, wellness programs, and professional development opportunities — all within a people-first, award-winning hybrid work environment. See more details about benefits here. If this sounds like a company you want to be part of then apply now! New Hires must have documents indicating they are eligible to work in the United States. EEO/AA Employer. For California based applicants, our CCPA-CRPA Privacy Notice can be found on our Careers page at #LI-HYBRID

Job DescriptionYU & Associates, Inc., an awarding winning engineering firm located in Elmwood Park, New Jersey is seeking a Transportation Project Manager to join our team. As a Project Manager specializing in water resource engineering, you will be responsible for leading and managing projects related to water management, drainage systems, flood control, and watershed management. Responsibilities • Lead and oversee water resource engineering projects, including the design, analysis, and implementation of water management systems, drainage systems, and flood/resiliency control measures., • Serve as the primary point of contact for clients, ensuring effective communication and maintaining strong client relationships throughout the project lifecycle., • Manage and mentor a multidisciplinary project team, providing technical guidance, assigning tasks, and ensuring project objectives are met., • Develop comprehensive project plans, including scope, budget, schedule, and resource allocation., • Coordinate with internal and external stakeholders, such as government agencies, environmental consultants, and contractors, to ensure project compliance and successful execution., • Conduct hydrologic and hydraulic modeling, analyze data, and prepare reports and recommendations for water resource management projects., • Evaluate and design stormwater management systems, including detention basins, green infrastructure, and erosion control measures., • Review and approve project deliverables, including design plans, technical specifications, and construction documents., • Monitor project progress, identify potential risks and challenges, and implement effective mitigation strategies., • Ensure compliance with applicable regulations, permits, and environmental standards., • Bachelor's degree in civil engineering, Water Resources Engineering, or a related field. A master's degree is a plus. Professional Engineer License in New York and/or New Jersey is required, or ability to obtain within 6 months., • 10+ years of experience in design, planning, and implementation of stormwater and hydraulic elements with a focus on project management, • Proven track record of successfully managing water resource engineering projects, including drainage systems, flood control, and watershed management. Strong knowledge of hydrology and stormwater and green infrastructure design., • Proficient with CAD/Design Software (AutoCAD, MicroStation, Civil 3d, Inroads/OpenRoads) and able to assist others as needed., • Proficient with stormwater modeling software such as CivilStorm or StormCAD required., • Business development skills and the proven ability to win work a plus., • Good client relationship development sills., • Experience writing proposals, scopes of work, and budgets for projected work., • Ability to effectively communicate at all levels of the organization., • Ability to manage & mentor staff, and direct resources effectively in a positive manner., • Ability to travel to job sites.We offer employees competitive compensation packages, medical/dental/vision, life insurance, short, and long-term disability, paid holidays, paid time off, and 401k retirement plan with company match. YU & Associates’ is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees’ well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: · Benefits: • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program – based on individual and company performance., • Yearly review – based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation, • Beneficiary Grief Support SALARY RANGE: $83,000 - $95,000 Powered by JazzHR yd94kvAx1V