Trabajos project engineer en Syracuse, New YorkCrear alertas

We are seeking a Level 4 Senior Staff RF Engineer with a strong systems engineering focus to lead the architecture, analysis, and optimization of advanced RF systems for radar and communication applications. This role will require the ability to derive complete RF system budgets, assess and manage key performance parameters such as phase noise, CPCR (Clutter Power to Carrier Ratio), CA (Coherent Ambiguity), and more, while collaborating across engineering disciplines to ensure system performance exceeds mission requirements. We are seeking RF Engineers with deep expertise in antenna systems, element/mutual coupling, and free-space radiation performance—and the proven ability to rapidly evaluate, troubleshoot, and optimize existing antenna designs. Key Responsibilities: • Derive and document RF system requirements working collaboratively with multiple technical disciplines, • Develop innovative RF subsystem and system architectures, • Simulate, model, design, select and characterize components, • Design, implement, test, and integrate RF circuit cards and subsystems for use in our radar, and other sensor systems, • Participate in cross-functional technical design reviews, • Perform and support integration and test activities and events, • Support or perform project planning, execution, and oversight, • Provide mentorship to junior staff Compensation Range: $115,700 - $150,500 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Required Qualifications: • (Master’s or PhD preferred)., • 10+ years of experience in RF system design, • Demonstrated experience deriving and validating system-level RF budgets., • Demonstrated skills in software simulation platforms such as Ansys HFSS, Genesys, CST, MATLAB, or Python, • Experience and interest in one or more of the following areas:, • Antennas and Phased Arrays, • Receivers, • Exciters, • Simulation, • Anechoic Chamber Measurements, • Schematic Capture, • Strong skills with RF measurement equipment, • Excellent written and verbal communication skills to efficiently convey complex ideas, coupled with an ability to listen, question, and understand stakeholder needs., • US Citizenship with the ability to obtain and maintain a security clearance. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: * Medical, vision, and dental insurance for employees and dependents * Generous paid time off, including 8 designated holidays * 401(k) with employer contributions * Tuition assistance and student loan assistance * Wellness and employee assistance resources * Employee stock purchase opportunities * Short-term and long-term disability coverage Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

We are seeking a Senior RF Engineer to design, develop, and test discreet transmit/receive (Tx/Rx) RF modules for advanced radar applications. The ideal candidate will have a strong background in RF circuit design, system integration, and performance optimization, with hands-on experience in taking designs from concept to production. Key Responsibilities: • Derive and document RF system requirements working collaboratively with multiple technical disciplines, • Perform trade studies and develop RF system architectures, • Simulate, model, design, select and characterize components, • Design, implement, test, and integrate RF circuit cards and subsystems for use in our radar, and other sensor systems, • Participate in cross-functional technical design reviews, • Perform and support integration and test activities and events, • Assist with or provide information in support of project planning, execution, and oversight Compensation Range: $101,600 - $132,000 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Required Qualifications: • Bachelor’s degree in Electrical Engineering, RF Engineering, or related field, • 5+ years of experience in RF system design, • Proficiency in RF simulation tools (e.g., Keysight ADS, HFSS, CST, or similar)., • Proficiency in schematic capture and PCBA layout tools such as; Ansys HFSS, Genesys, CST, MATLAB, or Python, • Experience and interest in one or more of the following areas:, • Receivers, • Exciters, • Simulation, • Hands-on experience with RF test equipment, • Experience with PCB design for RF and microwave circuits., • Familiarity with military or aerospace standards for RF systems is a plus., • US Citizenship and ability to obtain/maintain a security clearance. Citizenship Requirements: Must be a U.S. citizen, Permanent Resident (green card holder), or protected individual as defined by 8 U.S.C. 1324b(a)(3). Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: * Medical, vision, and dental insurance for employees and dependents * Generous paid time off, including 8 designated holidays * 401(k) with employer contributions * Tuition assistance and student loan assistance * Wellness and employee assistance resources * Employee stock purchase opportunities * Short-term and long-term disability coverage Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Job ID: 713373BR Date posted: Dec. 22, 2025 Description:What We're Doing As a part of the Lockheed Martin community, we take on challenges and find solutions using creativity and collaboration. If you're looking to be a part of a passionate team solving these complex problems, then Rotary and Mission Systems is the place for you. The Work As the Senior Test Software Automation Engineer, you will design and develop automated test station Software used to test RF/Digital/Analog/Power modules, subsystems, and systems. Designs can include automated test programs, as well as sim/stim test systems used in production test solutions. Responsibilities also include the design, development and maintenance phases of the project, presenting design documentation for customer and team reviews, integration and validation of the test software and costing/proposal data generation for new business. Who We Are Lockheed Martin is a global aerospace, defense, and security company dedicated to advancing scientific discovery and harnessing innovation to make the world a safer place. Our RMS business in Syracuse, NY is a hub of talented engineers, scientists, and professionals committed to shaping the future of defense technology. We value collaboration, excellence, and integrity in everything we do. As a part of our team, you will work alongside like-minded individuals dedicated to pushing the boundaries of what's possible. Learn more about IWSS Visit Our Syracuse Site Virtually! Click Here! Why Join Us Your Health, Your Wealth, Your Life Our flexible schedules, competitive pay and comprehensive benefits enable you to live a healthy, fulfilling life at and outside of work. Learn more about Lockheed Martin's comprehensive benefits package here! A level 3 employee is typically mid-career and has 3 to 5+ years of professional experience. #rmshotmiljobs #OneLMHotJobs #REAS Basic Qualifications: • Bachelor's degree in Computer Science, Computer Engineering, Electrical Engineering, or equivalent field., • Expereince with test solution software development and system/component integration & test, • Experience working with commercial test equipment including signal generators, network analyzers, spectrum analyzers, power meters, etc., • Test automation design and measurement experience or knowledge., • LabVIEW development, • C/C++ software development, • MatLab knowledge, • RF testing, • Experience leading design projects, • Knowledge and understanding of software as it applies to test development., • Linux system administration knowledge, • Windows 11 system administration knowledge, • Distributed computing knowledge As a leading technology innovation company, Lockheed Martin's vast team works with partners around the world to bring proven performance to our customers' toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories. Experience Level: Experienced Professional Business Unit: RMS Relocation Available: Possible Career Area: Hardware Engineering Type: Full-Time Shift: First

Saab, Inc. in East Syracuse is seeking a Quality Engineer to join a dynamic Quality Assurance team supporting the development of complex marine and ground-based radar systems. The ideal candidate is seeking an opportunity to grow their Quality Engineering expertise and expand their skills in a collaborative and fast paced environment. Saab provides an excellent working environment, offering advancement and professional growth opportunities, a competitive salary, and a comprehensive benefits package. Primary responsibilities include, but are not limited to: * Execute Quality Management System principles and processes. * Serve as the primary point of contact for all quality related matters on assigned programs. * Perform contract review, quality program planning, and requirements flow down. * Ensure products meet contractual requirements. * Identify and disposition nonconforming material. * Conduct corrective action investigations and implement resolutions. * Serve as Chair of the Material Review Board. * Develop quality performance estimates for cost proposals and project scheduling. * Support ECR/N generation, review, and participation in Change Control Boards. * Perform data and trend analysis. * Maintain and manage Oracle ERP database records. * Perform internal audits to ensure process maturity and capability while maintaining compliance across customer, production, and supply chain functions. * Monitor and track Corrective Action Requests and Corrective Action Plans. * Coordinate with external quality assurance auditors and technicians to ensure compliance. * Identify, communicate, and execute value added process improvements and initiatives. * Promote a people first culture aligned with Saab’s leadership vision. * Travel up to 10% annually. Secondary responsibilities: * Support incoming inspection and inspection planning. * Support calibration and maintenance of equipment. * Support Saab's internal quality metrics and reporting. Compensation Range: $92,200 - $115,300 The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Required Qualifications: * Bachelor’s degree in Engineering, Quality, or a related field with 8+ years of experience, or a Master’s degree with 6+ years of experience, or an equivalent combination of education and experience. * Ability to be self-driven and deliver a high quality of work. * Ability to drive and lead change. * Strong analytical and problem-solving skills. * Working knowledge of Department of Defense DoD programs, procedures, and processes. * Working knowledge of Quality System Management per AS9100. * Working knowledge of SEI CMMI. Desired Qualifications: * Expertise in the aerospace industry. * Extensive customer interaction experience, including contract-related engagement. * ASQ Certified Quality Engineer (CQE) certification. * IPC or other relevant industry certifications. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: * Medical, vision, and dental insurance for employees and dependents * Generous paid time off, including 8 designated holidays * 401(k) with employer contributions * Tuition assistance and student loan assistance * Wellness and employee assistance resources * Employee stock purchase opportunities * Short-term and long-term disability coverage Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Saab Inc.’s Surveillance U.S. Division is seeking a Senior Staff Radar Integration and Test Engineer to lead a key development radar program at our Headquarter facility in East Syracuse, NY. Make an immediate impact by supporting the surveillance systems that encompass all forms of detecting and tracking aircraft while in flight and on the surface of airports, including radar, multilateration, and Automatic Dependent Surveillance - Broadcast. Saab, Inc. specializes in the design and deployment of these solutions, the development of integrated surveillance systems, and the fusion and display of the information each creates. As a member of the team, not only will you have the opportunity to lead the integration and testing of these products for deployment to customers within the U.S., you will also learn the ins and outs of the products for career development. The location of this position is onsite in the East Syracuse, NY office although the ability to work remotely (within the Northeast region) is possible, depending on a candidate’s experience as well as program objectives. Responsibilities and development opportunities include: * Leading Integration & Test program planning and execution for verification and validation activities * Support Earned Value Management and schedule development * Developing and executing complex software and/or hardware test plans and procedures for system level testing * Leading complex integration activities and development of test environments and tools * Leading internal and external customers on technical and programmatic issues * Leading technical reviews and status meetings * Performing data analysis, preparing test briefings, and writing test reports * Working in accordance with standard operating procedures * Identifying the interdependencies of products and programs and planning integration and test events accordingly * Providing mentoring, technical guidance, and coaching for less-experienced engineers * Collaborating with SMEs to understand customer requirements and establishing test criteria * Contributing to the adoption of new design and development approaches to improve overall quality, reliability and speed of implementation * Responsible for several components of a project or a complex component of a larger project Compensation Range: $115,700-$150,500 The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Required Skills and Experience: * Bachelor's degree in an Engineering discipline, Computer Science, Physics or Mathematics. Master's degree is a plus. * 15+ years in a technical environment, primarily in a Test Engineering role. * Experience leading Developmental Test and Evaluation, Factory Acceptance Test (FAT), and Site Acceptance Testing (SAT) * Proven background in Radar focused software and hardware system integration & test activities. * Previously demonstrated leadership skills with cross functional experience. * Experience with hands-on Radar Systems. * Proven experience in functional and performance testing. * Experience with C++ and Linux and/or digital hardware * Experience in MATLAB for tool development/systems analysis. * Understanding of the use of configuration management, quality assurance, requirement management systems, and automatic testing tools. * Ability to independently and effectively interact with all stakeholders (internal/external) on technical issues. * Experience with providing cost-effective estimates for schedule, labor, and equipment required to cover integration and test activities of the team. * Understand the need for control, repeatability, and risk management and act accordingly and proactively. * Excellent presentation skills to enable integration and test related material, and effectively communicate in a group environment. * Ability to effectively multi-task and work well in a fast-paced environment. * Attention to detail and an analytical eye for noticing inconsistencies and an innovative passion for reconciling them. * Possess strong interpersonal and teamwork skills, must be able to interface respectfully with co-workers, customers, vendors, and subcontractors. Citizenship Requirements: Must be a U.S. citizen, Permanent Resident (green card holder), or protected individual as defined by 8 U.S.C. 1324b(a)(3). Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: * Medical, vision, and dental insurance for employees and dependents * Generous paid time off, including 8 designated holidays * 401(k) with employer contributions * Tuition assistance and student loan assistance * Wellness and employee assistance resources * Employee stock purchase opportunities * Short-term and long-term disability coverage Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Job DescriptionManufacturing/Production Manager Pay range: $125-150k/yr. DOE **This position is located in Syracuse, NY. We are seeking a highly capable and results‑driven Manufacturing/Production Manager to lead our growing, low‑volume/high‑complexity production operation focused on advanced cryogenic refrigeration systems. This role oversees multiple production departments along with the manufacturing engineering and maintenance teams, ensuring seamless coordination across all stages of the manufacturing process. The ideal candidate is a hands‑on, strategic leader who thrives in a dynamic technical environment with an eagerness to become deeply involved in the day-to-day production processes. They will drive daily operational performance, optimize workflows, and support continuous improvement initiatives while maintaining rigorous standards of safety, quality, and efficiency. Strong leadership, communication, organizational, and analytical skills are essential for success. The Manufacturing/Production Manager ensures that production schedules are accurate and achievable, resources are effectively allocated, and key performance targets are consistently met. This position also requires strong data‑gathering and analysis capabilities to support sound decision‑making, anticipate disruptions, and sustain long‑term operational stability. This is an opportunity to take ownership of a critical manufacturing operation and make a real, visible impact. As Manufacturing/Production Manager, you will play a key role in driving performance, building strong teams, and shaping how products are built, delivered, and continuously improved. If you thrive in a hands-on manufacturing environment, enjoy solving complex operational challenges, and are motivated by improving safety, quality, and efficiency, this role offers the chance to lead meaningful change and help scale a growing operation. Essential Duties and Responsibilities include the following. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Lead and manage daily manufacturing operations across multiple production departments and shifts * Oversee production, manufacturing engineering, and maintenance teams to ensure alignment with production goals * Manage the entire production lifecycle from planning and scheduling through execution and delivery * Promote a culture of accountability, teamwork, and continuous improvement * Develop, maintain, and execute accurate production schedules to meet customer demand and business objectives * Lead safety initiatives and ensure compliance with OSHA, company policies, and regulatory requirements * Ensure efficient utilization of labor, equipment, materials, and resources * Lead and sustain Lean and Six Sigma initiatives, including 5S, standard work, waste reduction, visual management, and continuous improvement programs * Drive continuous improvement initiatives focused on safety, quality, delivery, cost, and productivity * Establish and track key performance indicators (KPIs) and use data to drive operational decisions * Identify bottlenecks and implement process improvements to increase throughput and efficiency * Partner with Engineering to support new product introductions, process changes, and capital projects * Ensure preventive and corrective maintenance programs support production uptime and equipment reliability * Lead the selection, training, coaching, and development of supervisors and production staff. * Collaborate with Quality to ensure products meet internal and customer quality standards * Support budgeting, cost control, and productivity improvement efforts * Participate in strategic planning and support long-term operational capacity planning * Other duties as assigned Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Job Competencies: * Strong knowledge of manufacturing processes, scheduling, and capacity planning * Demonstrated success driving continuous improvement (Lean and Six Sigma, etc.) * Strong leadership, communication, and team development skills * Ability to manage multiple priorities in a fast-paced, results-driven environment * Strong problem-solving and decision-making skills Education and/or Experience Bachelor’s degree in engineering with 7-10 years of progressive leadership experience in a manufacturing environment, preferably low‑volume/high‑complexity or engineered‑to‑order production, or equivalent combination of education and experience. Experience with safety programs and regulatory compliance. ERP/MRP system experience; using KPIs and data to drive performance improvements. Experience with new product introduction and process improvement projects a plus. Professional certifications are a plus, including Six Sigma Green or Black Belt, Certified Manufacturing Engineer (CMfgE), Project Management Professional (PMP), or Certified Plant Manager (CPM). Physical Demands While performing the duties of this job, the employee is frequently required to sit, stand, walk, reach with arms and hands, and have hand and finger dexterity. The employee is regularly required to see, talk and hear. The employee may occasionally, stoop, kneel, or crouch. The employee will frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Work Environment This job operates in and out of a professional office environment. This position will have work that may be in an office or manufacturing setting. This position interacts with both internal and external customers in a professional, courteous manner, while keeping information confidential as needed. This role routinely uses standard office equipment such as computers, phones, filing cabinets and copiers. While in the manufacturing environment, the employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to humid conditions; fumes or airborne particles; heat; cold; risk of electrical shock and vibration. The noise level in the work environment is usually moderately loud. Mandatory PPE must be worn as required. Employee Benefits Bluefors offers a generous benefits package including health, dental, vision, 401K, long and short-term disability, life, training, tuition reimbursement, and Paid Time Off (PTO). At Bluefors, we are proud to design and manufacture world-class cryogenic solutions that enable breakthrough discoveries. From our Syracuse, NY facility, home to Cryomech product lines, we develop and build cryogenic systems that power advances in quantum technology, scientific research, and other cutting-edge industries. Founded in Finland in 2008, Bluefors quickly became the global leader in ultra-low temperature systems. With the addition of Cryomech, Syracuse-based pioneer since 1963, our combined expertise allows us to deliver reliable, high-performance products that scientists, innovators, and industries depend on every day. Our team of 600+ professionals from over 50 nationalities is united by curiosity, craftsmanship, and a share mission: to help our customers go further. Whether building precision cryocoolers, engineering complete measurement systems, or supporting our products in the field, we focus on quality, collaboration and progress. Working at Bluefors means contributing to technology that has real impact worldwide. In Syracuse, our employees are the heart of producing the cryogenic systems that enable tomorrow's discoveries - while building rewarding careers in engineering, manufacturing, quality, finance, sales, service and beyond. *This role does not offer sponsorship for work authorization. Bluefors Cryocooler Technologies, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration regardless of disability status, veteran status, or any other New York State or federally protected characteristic.

Job Description Company Overview CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary Supervisor of Special Inspections is a Licensed Civil Engineer (PE) who serves as the project engineer in-responsible-charge of CME’s contracted special inspections and structural tests. Responsibilities • Initial set-up and management of the Project Special Inspections Program, • Act as a consultant on construction related problems, failures or issues, • Attend pre-installation conferences and relay Inspection Program requirements to team, • Technical review of test/inspection reports for compliance with the construction contract documents and the New York Building Codes, • Perform on-site inspections and report results, • Certification of the Inspection/Testing Program at project completion, • Act as liaison with Registered Design Professionals and Code Enforcement Officials, • Serve as Owner's Agent in execution of the Special Inspections Program and exercise duty of care to the public, • Manage non-conformance list, prepare project test & inspection plans, • Assist in the prevention of construction material failures and workmanship problems, • Bachelor’s degree, Civil Engineering or related, • Registered Professional Engineer (PE) or current Engineer-in-Training (EIT) with goal of earning PE, • Experience with building codes and standards governing special inspections and structural tests, • A friendly, forthright, diplomatic, and communicative business demeanor Benefits CME offers competitive wages and all benefits listed here: Health, Dental, Vision, 401K, Health Savings Account, Supplemental Insurance Products, and Paid Time Off (including Holiday, Vacation, Sick and Personal). All benefits become available to eligible employees upon completion of an eligibility period. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE). Powered by JazzHR gN7vWSznz0

Job Description We are currently seeking qualified candidates to fill a Bridge Project Engineer position in our Syracuse, NY office to lead, oversee, supervise, and coordinate project activities for assigned project through all phases. Duties: • Ensure the success of the projects under his/her management (including planning, quality assurance, deadlines, and financial aspects/collections) and the substantial quality of the firm’s services, • Handle all aspects of a project, including proposal, contract negotiation, Project Work Plan (scope, fees, hours, schedule, budget), negotiate terms and conditions, and final agreement/contract in conjunction with the project team, • Plan, organize, and supervise the work and workload of project staff, • Monitor project costs to ensure that project is delivered within budget, • Review invoice charges for accuracy related to hours billed, coordinate customer billing and/or invoicing with Accounting Department, and follow up on outstanding invoices as needed, • Prepare monthly financial reports (project percent complete, month end closeouts, projections, etc.), • A licensed, New York State Professional Engineer with 8-15 years of Bridge Project Management experience and previous NYDOT experience., • Proven ability to manage bridge projects and lead teams to meet schedule, budget and quality, • Strong communication skills, • Ability to work remotely with team members in other offices, • Experience with local municipality and state projects Salary Range: $80,000 - $115,000 per year

Job DescriptionPosition summary:Team Leader is responsible for ensuring that the bridge is inspected and that the inspection reports are prepared in conformance with the requirements per NYSDOT Specification. Essential Functions and Responsibilities:Lead inspection team and coordinate teams and equipment Prepare in-office support for field inspection Perform field measurements, evaluate existing conditions and document finding in the field Writing the technical inspection reports Preparation of analysis and ratings for the structure in question Perform calculations including load ratings Development of recommended construction documents for repairs of field condition requiring interim repair (i.e. flagged conditions). Required Skills:New York State PE License (or ability to obtain within one month of starting work) Evidence of satisfactory completion of any of the following: FHWA/NHI Course #130055 – Safety Inspection of In-Service Bridges (2-week class) FHWA/NHI Course #130056– Safety Inspection of In-Service Bridges for Professional Engineers (1-week class) NYSDOT Bridge Inspection Certification Required Experience:Have at least 3 years of bridge experience in design, construction, inspection or other bridge engineering related work Active driver’s license. Working ConditionsWork is performed in the field. Ability to extensively perform bending, kneeling, standing, shoveling, and lifting and carrying objects weighing up to 50 lbs. as needed. Work may be conducted outside in heat/cold, wet/humid, and dry/arid conditions. MUST HAVE:Have at least 3 years of bridge experience in design, construction, inspection or other bridge engineering related work Active driver’s license. New York State PE License (or ability to obtain within one month of starting work) Evidence of satisfactory completion of any of the following: FHWA/NHI Course #130055 – Safety Inspection of In-Service Bridges (2-week class) FHWA/NHI Course #130056– Safety Inspection of In-Service Bridges for Professional Engineers (1-week class) NYSDOT Bridge Inspection Certification.

Job Description Company Overview CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary CME is seeking a skilled and detail-oriented Utility Locate and Ground Penetrating Radar (GPR) Technician to join our team. The successful candidate will be responsible for utilizing advanced technology to identify and map underground utilities, ensuring accurate and safe excavation practices. This role requires a strong understanding of utility systems, excellent technical skills, and the ability to work independently and as part of a team, under the supervision of a Licensed Engineer. Responsibilities • Use electromagnetic locating equipment to identify and mark underground utilities including water, sewer, gas, electric, and communication lines., • Operate GPR systems to detect and map subsurface structures, objects, and anomalies. Analyze GPR data to provide accurate reports and interpretations., • Review and interpret data from utility locate and GPR systems, creating detailed maps and reports for use in planning and excavation., • Conduct field surveys and inspections to verify utility locations and assess site conditions., • Maintain accurate and detailed records of utility locations, GPR data, and field observations., • Adhere to safety protocols and standards to ensure safe working conditions on job sites. Report any potential hazards or safety concerns., • Communicate effectively with clients, providing clear explanations of findings and recommendations., • Perform routine maintenance and calibration of utility locating and GPR equipment to ensure optimal performance., • High school diploma or equivalent, along with technical certification in utility locating and GPR technology. Bachelor’s or associate degree in geology, civil engineering, or a related field is preferred., • Minimum of 2 years of experience in utility locating, ground penetrating radar, or a related field. Experience in construction or civil engineering is a plus., • Proficiency in operating utility locating equipment and GPR systems. Ability to analyze and interpret data from these technologies., • Strong understanding of underground utility systems, mapping techniques, and safety regulations., • Ability to work in various environmental conditions, including outdoor sites and confined spaces. Must be able to lift and carry equipment as needed., • Excellent verbal and written communication skills. Ability to convey technical information to non-technical stakeholders., • Strong analytical skills and attention to detail in data collection and reporting. Working Conditions • This position involves working outdoors in varying weather conditions and potentially hazardous environments., • May require occasional travel to different job sites. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE). Powered by JazzHR 8HkU1hIZnv

Job DescriptionDescription: Fisher Associates is seeking a Senior Highway Transportation Engineer (PE) with 20+ years of progressive highway and roadway design experience, including NYSDOT projects, to serve as a technical leader within our Infrastructure + Mobility team. This role is well suited for a seasoned Professional Engineer who is driven by technical excellence, sound engineering judgment, and the opportunity to shape meaningful transportation improvements within the communities we serve. With a strong backlog of transportation work and a major upcoming NYSDOT project, this role offers immediate involvement in high-profile, technically complex assignments for state and municipal clients. As a Senior Highway Engineer, you will serve as a technical authority on roadway reconstruction, corridor improvements, intersection upgrades, and other transportation infrastructure projects. You will provide advanced design oversight, ensure quality and regulatory compliance, guide engineering standards, and mentor staff while strengthening our transportation practice. This position offers the opportunity to apply your expertise to impactful projects you can see take shape, delivering roadway solutions that enhance safety, mobility, and long-term performance across the region. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Senior Highway Transportation Engineer • Serve as senior technical lead and subject matter expert for the development of highway design plans and construction cost estimates for new and rehabilitation projects., • Perform and oversee advanced geometric roadway design, including alignments, profiles, cross-sections, grading, and interchange layouts., • Manage complex design challenges independently., • Serve as the technical authority conducting comprehensive reviews to ensure quality, constructability, and compliance with applicable standards., • Opportunity to serve as Engineer of Record, assuming full responsibility for the technical integrity of roadway design documents., • Ensure compliance with state and local design standards, regulations, and safety requirements., • Support project managers in maintaining scope, schedule, and budget alignment., • Provide technical support during construction, including responding to RFIs and participating in site visits., • Lead coordination with clients, subconsultants, regulatory agencies, and internal teams., • Professional Engineering License (PE), • B.S. degree in Civil Engineering or related field (MS preferred), • 20+ years of progressive highway design experience, • Advanced proficiency in MicroStation or OpenRoads., • Experience working with and adhering to NYSDOT design standards, • Demonstrated experience serving as senior technical reviewer and design authority., • Dedicated to fostering trusting relationships through collaboration, integrity and respect., • Deliver high-quality work using critical thinking, sound judgment, and exceptional organizational skills., • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment. Actual compensation will vary based on experience, qualifications, and other factors. The listed salary range does not guarantee specific pay or reflect total compensation and excludes the value of benefits. Why You’ll Love Working at Fisher • You are empowered to deliver results through collaboration, trust, and ownership., • Your voice matters shaping decisions in an inclusive and transparent culture., • Your growth as a leader is a priority, supported by clear career paths and continuous learning., • You thrive in a positive culture that celebrates wins and keeps work fun and enjoyable., • Your leadership journey focuses on developing, coaching, and empowering high-performing teams. Lead meaningful highway design work, influence technical standards, and grow your career within a firm that values expertise and leadership. We offer competitive compensation and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law. #LI-Hybrid

Job Description We are seeking a Senior Electrical Engineer with a strong focus and background in Building Projects to work in our Syracuse, NY Office. This position will work closely with engineering staff to develop concepts, strategies, designs, drawings, specifications and reports. Individual must be able to work independently, as well as part of multi-discipline teams producing electrical engineering documents. Duties • Interact closely with mechanical, civil, structural engineers and project architects, • Function as lead electrical engineer for multi-discipline projects, through all phases (proposal, design, bidding and construction)., • Perform code reviews., • Delegate and monitor project tasks to junior team members., • Meeting with external and internal clients., • A Bachelor’s degree is required., • A minimum of 10 years of experience working at an A/E consulting firm is required., • New York State Professional Engineer’s license is preferred., • AutoCAD and Revit experience is a plus., • Experience in electrical distribution systems, power, lighting, and utilities, as well as communications, security, and fire alarm systems are desired. Salary range: $100,000.00 - $140,000.00 per year Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description We are currently hiring a mid-level Mechanical Engineer in our Building Engineering Division – Energy team. LaBella’s Energy team provides comprehensive energy efficiency and renewable energy consultancy, including feasibility analyzes, design, and commissioning services. Our engineers are well-versed in all aspects of building and energy systems design relating to a variety of new construction, renovations, and design/build projects for a variety of clientele. The Mechanical Engineer will work with our engineers in a lead role on a variety of decarbonization/electrification projects to develop projects in feasibility stages all the way through design and construction. A successful candidate will be able to work well in a team, mentor junior engineers, and communicate effectively with clients. Duties • Lead design of building HVAC systems and district energy systems, • Field investigations to document existing conditions, • Selection and calculations for design purposes, • Work with Jr Engineers to develop and review project drawings and documentation, • Interact directly with clients by completing analysis of design options, cost benefit comparisons, and communicating results to assist in decision making process., • 4-8 years of relevant experience, • Bachelor’s degree in Mechanical Engineering is preferred, • Well-rounded experience in HVAC and hydronic system design, • Designing geothermal or district energy systems experience preferred, • Experience with Revit or AutoCAD, • New York State Professional Engineer’s license is a plus, • Excellent verbal and written communication skills Salary range: $80,000.00 - $100,000.00 per year Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description Our Client is seeking a Project Engineer - Water/Wastewater to join their growing team in Syracuse, NY! Water and wastewater management presents unique challenges from environmental, health, and economic issues, to regulatory concerns. Our water management experts comprehend these complexities and apply their expertise in all areas of feasibility, design, and master planning, taking into consideration the value of water as a precious natural resource. Our qualified professionals develop creative and effective solutions for any water management project and are dedicated to ensuring that communities receive safe, consistent water and wastewater distribution, collection, and treatment. Responsibilities • Independently apply extensive and diversified knowledge of principles and practices in broad areas of assignments., • Prepare advanced engineering designs and/or technical data for completion and accuracy., • Utilize advanced techniques, theories and practices to complete assignments., • Design and review complete project documents for conformity and quality assurance., • Develop and apply new and/or improved techniques, processes, etc., for designing engineering plans., • Analyze and interpret data, formulate and solve problems., • Prepare or review scopes of work and budgets, and schedule assignments., • Prepare proposals to provide professional services., • Provide direction to engineers, technicians and administrative staff., • Plan and coordinate detailed aspects of engineering work., • Represent the organization in a variety of ways as an expert on engineering assignments., • Work within AutoCAD Civil 3D and alongside the design team managers to successfully complete projects within established budgets and deadlines., • Perform field investigations/ site visits as needed., • Prepare comprehensive draft proposals and change orders for review., • Prepare conceptual layouts in consultation with PM or client., • Review hydraulic calculations., • Review utility layouts., • Conduct team and select client meetings., • Provide technical guidance to Engineers and Senior Engineers., • Prepare and review pump station designs., • Review and respond-to contractor shop drawing submittals, RFIs, and change order requests, with assistance from PM., • Process contractor requests for payment, with assistance from PM. Qualifications • Bachelor of Science degree in environmental engineering or civil engineering., • FE preferred., • PE preferred., • 4-6+ years of experience in the civil/environmental engineering field with a concentration in water/wastewater design., • Experience, including linear (pipeline) work required., • Some experience with pump station design, water & wastewater treatment systems design preferred., • Experience with AutoCAD & OpenRoads is desired., • Excellent communication skills., • Design experience with water and wastewater treatment plant processes and design., • Ability to read, write,and understand English for purposes of comprehending written job-related communications and verbal instructions and interactions.

Job Description LaBella is currently hiring for a Senior Structural Engineer in our Syracuse, NY office. The Structures Discipline provides structural engineering services with emphasis on new design, repair and rehabilitation of constructed works, as well as investigation and performance evaluation. Individual must be able to work independently, as well as part of multi-discipline teams. Duties • Serves as a Lead Engineer who supervises a team of structural engineers, designers and technicians in production of structural construction documents including drawings, specifications, bidding and construction administration for large complex projects including calculation and document reviews., • Develops cost effective system layouts as well as performing calculations and coordination with other disciplines., • Performs site visits for documentation and cost estimating of existing systems and building conditions., • Prepares technical specifications., • Reviews and evaluates shop drawings and product submittals., • Visits construction sites to inspect work in progress or completed., • Maintains and manages budgets for projects including hours and resources., • Maintains client relationships, • Prepares Engineering Reports., • Completes complex and specialty types of design., • Stays abreast of technical advancements in respective field and disseminates information to others., • Minimum of 15 years of experience working in the consulting engineering industry., • Strong writing and communication skills., • Demonstrated ability to meet deadlines., • BS in Civil Engineering is required., • A New York State PE license is required., • Revit Experience is a plus., • Project history using computer analysis software experience is essential. Salary Range: $100,000 - $150,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job DescriptionDescription: At Atlantic Testing Laboratories (ATL), we offer a dynamic career that blends fieldwork with office assignments. With more than 55 years of experience, ATL is a full-service engineering support firm operating from 11 offices throughout New York State. Our commitment to employee satisfaction and client service results in a culture of opportunity and inclusion. ATL is an expanding firm and is in search of qualified Geotechnical Engineer candidates. Experienced and entry level/early-career candidates are encouraged to apply. Geotechnical Engineer Perks & Benefits: • Competitive pay ranging from $63,000 to $95,000/year, • A mix of field and office assignments, • Directed experience and financial support for professional licensure (EIT, PE, IG, PG), • Advancement opportunity, • Company vehicle to travel between office and job sites, • Competitive Health Insurance: multiple plans offered, • Paid Vacation/Sick/Personal/Holidays, • Safety training and equipment, • B.S. in Civil Engineering, Civil Engineering Technology, Geology or related degree, • NYS PE, PG, EIT or IG license/certificate, • Strong written and verbal communication skills, • Ability to review and interpret project plans and specifications, • Ability to effectively multitask, • Positive attitude with ability to work independently and in a team environment, • Perform evaluation of subgrade preparation for shallow foundations, • Monitor the installation of deep foundation systems, • Perform construction materials engineering, geotechnical evaluations, and special inspections during construction, • Provide technical support to Construction Materials Technicians, • Project Management duties including preparation and review of proposals, client management, technical reviews of reports, and review of project invoices, • Preparation and distribution of technical reports and project correspondence

Job DescriptionDescription: Bridge Design Engineer - Civil/Structural Advance Your Career | Shape the Infrastructure of Tomorrow Fisher Associates is seeking a Bridge Design Engineer with a civil or structural engineering background to join our growing Bridge and Transportation Engineering team. This role offers the opportunity to work on impactful bridge design and transportation infrastructure projects that enhance safety, resilience, and connectivity in the communities we serve. Whether you are already licensed or pursuing your Professional Engineering (PE) license, you’ll receive mentorship and hands-on experience across a variety of bridge and transportation projects. As a Bridge Design Engineer, you will collaborate with experienced professionals on the design, analysis, inspection, and rehabilitation of bridges, applying current DOT standards and industry best practices. This is an excellent opportunity to grow your career in bridge engineering and transportation infrastructure while making a lasting public impact. If you’re ready to advance your career and help shape the infrastructure of tomorrow, we encourage you to apply today. About Fisher Associates: At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Bridge Design Engineer • Support bridge design engineering, including load rating, structural analysis, and foundation design., • Develop design plans, construction documents, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Ensure all designs comply with applicable state and local standards, regulations and safety codes., • Support project managers with schedules, documentation, and presentations., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Conduct field inspections and prepare detailed bridge inspection reports and analyze foundation design., • Provide technical support during construction, respond to RFIs and attend site visits., • Collaborate with internal teams, clients, subconsultants and agencies to ensure seamless project delivery. Requirements: What You Bring, Your Expertise as a Bridge Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5-10 years of transportation experience with a background in structures/bridge design., • EIT required; Professional Engineering (PE) license preferred or ability to obtain licensure., • Proficiency in MicroStation, STAAD and Bridge Design Software, • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred), • Professional performance aligned with Fisher’s Mission, Vision, Core Values, and Clientship philosophy., • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment., • Superior organizational and planning skills with keen attention to detail, • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths, career discussions and tuition assistance., • You thrive in a culture that keeps work fun and fosters a relaxed, easy-going atmosphere., • Your journey is supported by a collaborative environment that promotes mentorship and ongoing learning. Your Impact Matters, Your Career Thrives. Work on impactful bridge design engineering projects while gaining diverse, challenging experience that supports your professional growth and career advancement. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law. #LI-Hybrid

Job DescriptionDescription: Highway Project Engineer (PE) – Civil / Structural Design the Roadways That Keep Communities Moving Fisher Associates is seeking a Highway Project Engineer (PE) to help shape safe, reliable transportation infrastructure through the planning, design, and delivery of roadway projects. This is an exciting opportunity for a Civil Engineer who wants to make a visible, lasting impact on public infrastructure while working with a firm recognized for its technical excellence and innovative solutions. As a key member of our civil engineering team, you will lead and support highway design efforts, blending hands-on engineering with project coordination to ensure successful project delivery. You’ll work on impactful transportation improvements, apply industry and DOT standards, and contribute to projects that enhance mobility, safety, and overall quality of life in the communities we serve. If you’re ready to take ownership of meaningful transportation projects and grow your career in a collaborative, forward-thinking environment, we’d welcome the opportunity to connect with you. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide, empowering our teams to drive meaningful change through their work. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Highway Project Engineer • Lead the development of preliminary and final highway design plans and cost analyses for new and existing infrastructure projects, delivering solutions that meet client goals and performance expectations., • Perform highway and drainage design tasks, including roadway alignments, profiles, and related project responsibilities., • Maintain detailed records of design documents, reports, schedules and budgets., • Ensure designs adhere to state and local standards, regulations and safety codes., • Review plans and technical deliverables to ensure quality, accuracy, and constructability., • Participate in project planning meetings and align tasks to meet scope, schedule, and budget requirements., • Support project managers with schedules, documentation, and presentations., • Provide technical support during construction, respond to RFIs and attend site visits., • Collaborate and communicate effectively with clients, subconsultants and regulatory approving agencies., • B.S. degree in Civil Engineering or related field (MS preferred), • 10+ years of transportation experience with a strong background in highway design., • Professional Engineering License (PE) or ability to obtain it., • Proficiency in MicroStation and OpenRoads., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred)., • Professional performance aligned with Fisher’s Mission, Vision, Core Values, and Clientship philosophy., • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening., • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment., • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment., • Superior organizational and planning skills with keen attention to detail., • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths, career discussions and tuition assistance., • You thrive in a culture that keeps work fun and fosters a relaxed, easy-going atmosphere., • Your journey is supported by a collaborative environment that promotes mentorship and ongoing learning. Your Impact Matters, Your Career Thrives. Work on impactful highway design projects that improve transportation networks in your community while offering diverse, challenging opportunities for professional growth and career advancement. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law.

Job DescriptionDescription: Precast Design Engineer - Civil/Structural Join Our Team as a Precast Design Engineer – Innovate and Lead in Concrete Design Are you ready to take your engineering career to new heights? Fisher Associates is seeking a skilled Precast Design Engineer to join our dynamic team, where your expertise in designing precast concrete components will make an impact on diverse civil and structural projects. Join Fisher Associates and bring your talents to a team that values innovation, collaboration, and your unique contributions. Apply now to advance your career and play a key role in impactful projects within a supportive and dynamic environment! About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Precast Design Engineer • Lead and execute precast engineering and design tasks efficiently., • Collaborate with project teams to deliver structurally sound, cost-effective, and visually appealing precast concrete designs., • Perform and review structural analysis and calculations to ensure safety under various loads and conditions., • Select materials and components for precast concrete production that meet strength, durability, and sustainability standards., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Support cost estimation for materials, • Support Project Managers and Designers throughout the project lifecycle., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5 -10 years minimum Precast concrete design engineering experience, • Experience in precast concrete design engineering for transportation infrastructure and underground structures (utility vaults, manholes, drainage structures and pump stations) preferred, • Familiarity with ACI 318, ACI 350, ASCE-7, AASHTO, • Familiarity with IBC codes a plus, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in AutoCAD & RISA 3D, • Professional performance aligned with Fisher’s Mission, Vision, and Core Values, • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment., • Superior organizational and planning skills with keen attention to detail, • You are empowered to achieve exceptional results through collaboration and leadership of multidisciplinary design teams., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths and leadership opportunities., • You thrive in a culture that keeps work engaging and fosters a relaxed, easy-going atmosphere., • Your journey is supported by a team-driven environment that promotes mentorship and ongoing learning. Your Impact Matters, Your Career Thrives. Create meaningful community impact through engaging precast engineering projects while advancing your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law. #LI-Hybrid

Job Description Company Overview CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary Join our team as a Construction Special Inspector, providing essential inspections and material testing on high-profile commercial projects throughout the Greater Syracuse, NY area. Help ensure compliance on some of the regions most exciting construction sites. Responsibilities • Perform tests and inspections for soils, concrete, asphalt, reinforced concrete, masonry, welding & bolting, fireproofing & firestopping, geotechnical investigations, and more., • Read construction drawings and specifications and correctly interpret test results., • Complete assignment accurately and in accordance with appropriate established standards., • Record and report test results in a clear, concise manner., • Communicate regularly with project managers., • Complete field data records and associated reports daily., • HS Diploma required., • Degree in Civil Engineering / Technology, Geology, or related is ideal, although necessary., • Must possess at least one International Code Council (ICC) Certification for one of the following Special Inspector Categories: reinforced concrete, soils, masonry, spray applied fireproofing, steel & bolt or steel & weld, or American Concrete Institute (ACI) Grade 1, or Engineer-in-Training (EIT) Certificate through a State Board., • Ability to maintain effective working relationships with managers, teammates, and clients, through clear communications and proactive progress reporting. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE). Powered by JazzHR sFKHYHUzdX

Job DescriptionProfessional Engineer CPESC‑ Qualified Inspector Location: Central New York (Syracuse – Watertown) Position Type: Full-time Position Overview We are seeking a Professional Engineer (P.E.) licensed in New York State with active CPESC (Certified Professional in Erosion and Sediment Control) credentials to serve as a Qualified Inspector for erosion, sediment, and stormwater compliance. This role ensures that construction projects comply with New York’s erosion, sediment control, and stormwater regulations. The ideal candidate brings strong technical expertise, excellent field judgment, and the ability to communicate effectively with contractors, clients, and regulatory agencies. Key Responsibilities Erosion & Sediment Control Compliance • Conduct routine and event‑based inspections of active construction sites to ensure compliance with approved SWPPP (Stormwater Pollution Prevention Plans) and regulatory requirements., • Identify deficiencies, recommend corrective actions, and verify implementation of erosion and sediment control measures., • Document site conditions through detailed inspection reports, photographs, and field notes.Stormwater Management Oversight, • Review and interpret stormwater management plans, grading plans, and engineering drawings., • Ensure BMPs (Best Management Practices) are properly installed, maintained, and function as designed., • Evaluate site conditions after rainfall events and assess potential environmental risks.Regulatory Coordination, • Serve as the primary point of contact for regulatory agencies during inspections or audits., • Maintain up‑to‑date knowledge of federal (EPA), state, and local stormwater regulations., • Assist with permit applications, renewals, and compliance documentation.Engineering & Technical Support, • Provide engineering guidance related to erosion control design, drainage, and site stabilization., • Recommend improvements or modifications to BMPs based on site conditions and performance., • Support project teams with technical analysis, calculations, and plan reviews.Reporting & Documentation, • Prepare clear, accurate, and timely inspection reports., • Track corrective actions and ensure closeout of compliance issues., • Active New York state Professional Engineer (P.E.) license., • Current CPESC (Certified Professional in Erosion and Sediment Control) certification., • Minimum 4 years of experience in civil engineering, environmental compliance, construction oversight, or related field., • Strong understanding of erosion and sediment control practices, stormwater regulations, and BMP implementation., • Ability to work independently in field conditions and make sound technical decisions., • Excellent written and verbal communication skills., • Permit conditions and compliance understanding, • Proficiency with inspection software, GIS tools, and standard office applications.Preferred, • Experience with large‑scale infrastructure, electrical and gas rights of ways, or land development projects., • Knowledge of hydrology/hydraulics, grading, and drainage design., • OSHA 10/30 certification., • Experience coordinating with contractors and regulatory agencies.Working Conditions, • Frequent fieldwork in varying weather conditions., • Ability to walk uneven terrain, climb slopes, and carry field equipment. In accordance with applicable pay transparency laws—including but not limited to those in California, Colorado, New York, Washington, and other jurisdictions—we disclose salary ranges to promote equity and transparency. Where required by law, compensation and benefits information will be included in job postings or made available upon request. This job description outlines the primary responsibilities and standards of the position but is not exhaustive. Employees may be asked to perform additional duties that are reasonably related to their role and consistent with company policies and applicable labor laws. Employee welfare and development is important to us, and we sponsor many activities outside of work to promote team building as well as sponsor formal training and certification. We are proud to offer a comprehensive health and welfare benefit package that includes: HEALTH & WELL-BEING • Medical Insurance, • Dental Insurance, • Disability Insurance (STD/LTD), • Flexible Spending Account, • Health Savings Account, • Basic Life/AD&D, • Paid Time Off for eligible roles, • Company Holidays, • Leave of Absence, • Employee Referral Program, • Professional Development Clear Path Utility Solutions orchestrates a critical leadership role between construction companies and vegetation field services, providing advanced emergency and non-emergency response services to help utility companies assess, plan and execute vegetation projects in the field as they evolve. See full details and meet our leadership team on our website: Clear Path Utility Solutions, LLC. Clear Path is an Equal Employment Opportunity (EEO) employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veterans’ status or other status protected by applicable law. Pursuant to the Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. This position is open to individuals who are currently authorized to work in the United States on a full-time basis. Unfortunately, we are unable to sponsor or assume sponsorship of employment visas at this time. Powered by JazzHR qyS3hdcrpn

Job DescriptionDescription: Highway Project Engineer (PE) – Civil / Structural Design the Roadways That Keep Communities Moving Fisher Associates is seeking a Highway Project Engineer (PE) to help shape safe, reliable transportation infrastructure through the planning, design, and delivery of roadway projects. This is an exciting opportunity for a Civil Engineer who wants to make a visible, lasting impact on public infrastructure while working with a firm recognized for its technical excellence and innovative solutions. As a key member of our civil engineering team, you will lead and support highway design efforts, blending hands-on engineering with project coordination to ensure successful project delivery. You’ll work on impactful transportation improvements, apply industry and DOT standards, and contribute to projects that enhance mobility, safety, and overall quality of life in the communities we serve. If you’re ready to take ownership of meaningful transportation projects and grow your career in a collaborative, forward-thinking environment, we’d welcome the opportunity to connect with you. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide, empowering our teams to drive meaningful change through their work. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Highway Project Engineer • Lead the development of preliminary and final highway design plans and cost analyses for new and existing infrastructure projects, delivering solutions that meet client goals and performance expectations., • Perform highway and drainage design tasks, including roadway alignments, profiles, and related project responsibilities., • Maintain detailed records of design documents, reports, schedules and budgets., • Ensure designs adhere to state and local standards, regulations and safety codes., • Review plans and technical deliverables to ensure quality, accuracy, and constructability., • Participate in project planning meetings and align tasks to meet scope, schedule, and budget requirements., • Support project managers with schedules, documentation, and presentations., • Provide technical support during construction, respond to RFIs and attend site visits., • Collaborate and communicate effectively with clients, subconsultants and regulatory approving agencies., • B.S. degree in Civil Engineering or related field (MS preferred), • 10+ years of transportation experience with a strong background in highway design., • Professional Engineering License (PE) or ability to obtain it., • Proficiency in MicroStation and OpenRoads., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred)., • Professional performance aligned with Fisher’s Mission, Vision, Core Values, and Clientship philosophy., • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening., • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment., • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment., • Superior organizational and planning skills with keen attention to detail., • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths, career discussions and tuition assistance., • You thrive in a culture that keeps work fun and fosters a relaxed, easy-going atmosphere., • Your journey is supported by a collaborative environment that promotes mentorship and ongoing learning. Your Impact Matters, Your Career Thrives. Work on impactful highway design projects that improve transportation networks in your community while offering diverse, challenging opportunities for professional growth and career advancement. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law.

Job Description Overview Now Hiring! Analog Electrical Engineer Location: Albany, NY 12205 Schedule: Full Time Job Summary: Vitrek is currently looking for an experienced Senior Analog Electrical Engineer to join our growing team of Software and Electrical engineers.This position is for a Full-Time Engineer charged with leading system design at our engineering center of excellence located in Albany, NY. You would be part of a team of engineers designing the next generation of products as well as maintaining the existing product line. You would report to the Vice President of Engineering. What You’ll Do: • Circuit Performance testing, focusing on noise performance and stability, • Legacy and Production Support, • Application Support, • Potential team or project leadershipWhat's in it for You:, • Medical, Dental, Vision Benefits, • Competitive Base Compensation, • Accrued PTO Plan, • Career advancement opportunities in an expanding companyWhat You’ll Need:, • BS/MS EE from an ABET-accredited university, • 5+ years of relevant experience in analog design, • Proof of eligibility to legally work within the United States, • Switching Inverters intended for smaller devices with a power of less than 50W, • Low and ultra-low noise analog amplifiers using both op amps and discrete transistors, • Audio amplifiers, • Analog filters using active components

Job Description Position Overview: Hidden Level is transforming airspace safety with innovative, scalable drone detection and airspace technology. We provide real-time, actionable data to enhance security across various environments. We're looking for a Senior Systems Engineer who will apply their skills to lead internal product development and customer integration and adoption activities. This will be achieved through the analysis and support of sensor systems at each stage in the product lifecycle from conceptualization to deployment and maintenance. Location: This position is located in the Syracuse, NY office with the potential for hybrid arrangements. Responsibilities: • Design and implementation of algorithms and analysis methods and tools for radar, direction finding, or other surveillance sensor systems, • Assist in the development of system architecture for new hardware designs, • Plan and design test events in support of sensor performance validation, • Provide hands-on, in-field support of test events, • Author test reports and draw data-driven conclusions and recommendations based on test results What We’re Looking For: • A desire to own project assignments and work creatively and collaboratively on cross-disciplinary teams to deliver solutions that impress our customers and move our industry forward, • An open-minded approach to solving challenges, and proactive development of backup plans to ensure the team can hit the mark even when encountering the unexpected, • A mindset trained on long-term goals and objectives, balanced with making demonstratable incremental steps along the way to meet the pace of our industry, • Excellent written and verbal communication skills to efficiently convey complex ideas, coupled with an ability to listen, question, and understand stakeholder needs Required Qualifications: • Bachelor’s degree in Electrical Engineering, Computer Engineering, or a related technical field, • 5+ years professional experience, • Extensive knowledge of:, • Radar and/or communication systems using software-defined radios, custom hardware, and/or other COTS devices, • Sensor performance modeling and simulation, • Digital signal processing, • Analytical programming platforms such as MATLAB or Python, • Experience with fast-paced integration and test schedules and environments, • Ability to travel 25% Compensation and Benefits: Hidden Level offers a competitive salary and a comprehensive benefits package, including health insurance, paid parental leave, flexible time off, 401(k) with employer contributions, life insurance, disability insurance, and potential stock options. Salary Range: The anticipated salary range for this position based out of Syracuse, NY is estimated at $112,500 to $140,000 annually. Please note that the salary information is a general guideline only. Hidden Level considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Equal Opportunity Employer: Hidden Level is an Equal Opportunity/ Affirmative Action employer. All qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category. Security Note: Due to the nature of Hidden Level’s technology, only U.S. citizens can be considered for this position.

Job Description Hidden Level is transforming airspace safety with innovative, scalable drone detection and airspace technology. We provide real-time, actionable data to enhance security across various environments. As we expand, we're looking for an RF Engineer to join our team to help us accelerate our product development initiatives. Location: This position is onsite in Syracuse, NY office, with the potential for hybrid arrangements. Responsibilities: • Derive and document RF system requirements working collaboratively with multiple technical disciplines, • Perform trade studies and develop RF system architectures, • Simulate, model, design, select and characterize components, • Design, implement, test, and integrate RF circuit cards and subsystems for use in our cutting-edge communications, radar, and other sensor systems, • Participate in cross-functional technical design reviews, • Perform and support integration and test activities and events, • Assist with or provide information in support of project planning, execution, and oversight What We’re Looking For: • A desire to owe projects assignments and work creatively and collaboratively on cross-disciplinary teams to deliver solutions that impress our customers and move our industry forward., • An open-minded approach to solving challenges, and proactive development of backup plans to ensure the team can hit the mark even when encountering the unexpected., • A mindset trained on long-term goals and objectives, balanced with making demonstratable incremental steps along the way to meet the pace of our industry., • Excellent written and verbal communication skills to efficiently convey complex ideas, coupled with an ability to listen, question, and understand stakeholder needs. Required Qualifications: • Bachelor's degree in Electrical Engineering, or a related technical field., • 3-5years of professional experience, • Demonstrated skills in software simulation platforms such as Ansys HFSS, Matlab, or Python, • 10% travel Preferred Qualifications: • Experience and interest in one or more of the following areas:, • Antennas and Phased Arrays, • Receivers, • Exciters, • Simulation, • Anechoic Chamber Measurements, • Schematic Capture, • Advanced degree in Electrical Engineering, or a related technical field. Compensation and Benefits: Hidden Level offers a competitive salary and a comprehensive benefits package, including health insurance, paid parental leave, flexible time off, 401(k) with employer contributions, life insurance, and disability insurance. The company also provides a remote or hybrid work environment and potential stock options. Salary Range: The anticipated salary range for this position based out of Syracuse, NY is estimated at $89,000 to $110,000 annually. Please note that the salary information is a general guideline only. Hidden Level considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer Equal Opportunity Employer: Hidden Level is an Equal Opportunity/ Affirmative Action employer. All qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category. Security Note: Due to the nature of Hidden Level’s technology, only U.S. citizens can be considered for this position.

Job Description Employment Type: Full-Time FSLA: Salary/Exempt Salary Range: $95,000.00 - $110,000.00 Division: Project Management Department: Project Management Reports to: Project Manager Supervisory Duties: Yes The Assistant Project Manager (APM) will serve as a vital team member while assisting the Senior Project Manager and/or Project Manager on all aspects of a project. APM’s will be expected to take on central roles for the oversight of the Project Engineer with a specific focus on document control (RFIs, submittals, material delivery, etc.), subcontractor coordination, design team communication, project reporting and overall representation of Consigli throughout the entirety of the project. Responsibilities / Essential Functions • Serve as a main point of contact for communication with Owners, OPMs and Design Teams members., • Coordinate and provide input during weekly meetings with subcontractors, design teams, and owner representatives to resolve field conflicts and drive resolution., • Support project cost and change management process: prepare reports for review with other team members and present at both Owner and internal meetings., • Assist in development of estimates and bid proposals for both lump sum and GMP projects., • Oversight/Management of Project Engineer and associated responsibilities including document Control, RFIs, Submittals, Material Delivery Tracking and Meeting Minutes., • Mentor: support, develop, and train supporting team members, including Project Engineers., • Maintain close relations with subcontractors, including early notification of submittal & material delivery schedule expectations., • Monitor executed subcontracts and insurance certificates; verify contracts and insurance are in place prior to commencing work., • Coordinate with Project Scheduler to update and distribute project master schedule with input from Superintendent and project team., • Assist the project Superintendent and other team members in the resolution of all critical issues, RFI’s, etc. with a focus on quality, cost and schedule; provide documentation as necessary., • Take ownership of the closeout process: complete and implement project closeout checklist., • Manage close-out documentation (as-builts, O&Ms, warranties, test reports, etc.) for submission to Design Team and Owner., • Manage financial closeout process with subcontractors and Owner., • Punch List: Upload and distribute the punch list through Procore to subcontractors., • Assist with coordinating work completion as required and maintain an accurate log of items to be completed., • Observations and Field Reports: work with project team to conduct field walks as necessary and compile any corresponding documentation accordingly. Review Design Team field reports and work with required parties to resolve open items and drive to resolutions., • Safety: perform regular safety walks with field and safety staff and record observations. Key Skills, • Strong communication skills., • Ability to review, understand and support all change management processes., • Strong initiative and problem-solving abilities., • Ability to multi-task and self-prioritize., • Motivated and driven., • Ability to work in a team environment with a primary focus on collaboration., • Excellent written and verbal presentation skills. Required Experience • A bachelor's degree in engineering, Construction Management or Architecture preferred., • 3 - 5 years’ experience within the construction industry in project management or similar role., • OSHA 10 and OSHA-30 preferred., • Additional proficiencies may include cost management software (Timberline, Sage preferred), scheduling software (Primavera P6 preferred) and construction management software (Procore preferred).

Job DescriptionSalary: Title:Senior Environmental Engineer Location:Syracuse, NY Job Type:Regular Full-time Whatsthe Opportunity? Anchor QEA isseekinga full-time,senior environmentalengineer for ourSyracuse, NYoffice. We are interested in a candidate that is detail-orientated, is a committed team player, andpossessesstrong written and verbal communication skills. This positionwillinclude management of a range ofprojects and tasks,ranging from small sites tolarge complex remediationprojects. Projects are typicallyenvironmental engineering projects involvingsite assessment, remedialdesign,and construction management.Typical project locationsaregenerallyremediationprojects in theNortheast, but assignments may also include work on projects nationwide.Successful candidates will have an opportunity to work on a variety of tasks of differing complexities, both independently and in team environments, learn directly from leaders in the industry, and provide mentoring to our junior staff. Responsibilities: • Project and task management onprojects ranging from small tolarge complex remediation projects, including team assignments and coordination, client interaction, and production of deliverables., • Preparation ofwork plans,design documents,and supporting deliverables, including remedial investigation and feasibility study reports., • Performing engineering analyses/evaluations for a range of multi-disciplinary projects includingupland remediation,sediment remediation, waterfront development, restoration, and source control projects., • Technical writing to support the preparation of sampling and analysis plans, remedial investigation and feasibility study reports, and design documents., • Qualitative and quantitative analysis of environmental and engineering data, • Mentoring and training of junior staff on engineering principles and design, depending on existing experience and level What Are We Looking For? Ideal candidates will have the following: • BS or MS degree in relevant field (e.g., Civil or Environmental Engineering), • 15to 20years of relevant work experience, • Experience withupland andin-water remediation sites, including the planning and implementation of sampling, data analysis, feasibility studies, and remedial design., • Experience withNew York StateTechnical Guidance for Site Investigation and Remediation (DER-10)., • Experience with CERCLAandRCRA regulations and application to various stages of a remediation project., • Experience working with regulators (USEPA, USACE, and/or State regulators)., • Experience with Manufactured Gas Plant (MGP) site remediationa plus., • Risk assessment experiencea plus., • Strong understanding of the application of engineering principles to engineering design., • Professional Engineering (PE) licensureor ability obtain within one year, • ProficiencyinMSOffice., • Excellent written and verbal communication skills., • Critical thinking and strong problem-solving skills., • 40-hour HAZWOPER certification (CFR 1910.120)a plus. What Can You Expect? A collaborative work environment where we encourage everyone to bring their authentic self. We offer competitive compensation and benefits. Benefits detailed below. Who Are We? Anchor QEA provides environmental planning, science, and engineering consulting services with the mission of transforming our environment and communities with integrity and vibe. With more than 500 people in offices across the United States, our collective vision is to be an inclusive, sustainable, and growing environmental innovator making generational impacts. By embodying our core values, we strive to be our clients first choice for solving their most challenging problems and to be our employees reason to be excited about going to work each morning. Learn more about Anchor QEA at . How to Apply? Apply online through Anchor QEAs Open Positions page at are encouraged to apply. Applicants with a disability, who require a reasonable accommodation for any part of the application or hiring process, may e-mail their request Additional Information We work hard to embrace diversity and inclusion. As an equal opportunity employer, Anchor QEA is committed to a diverse, multi-cultural work environment. Anchor QEA does not discriminate in employment based on age, race, creed, gender, religion, marital status, veterans status, national origin, disability or sexual orientation. Employment is contingent upon satisfactory results of a comprehensive background check. Salary and Other Compensation: • Salary Range: $117,500-$132,000, • Annual Bonus, • Other potential bonus types: Billable Time Bonus, Spot Bonus, Milestone Anniversary Bonus, Receiving Professional License/Certification Bonus, Peer-reviewed Publication Bonus, Employee Referral Bonus. Base Level Benefits for Regular Full-Time Positions: • Healthcare: Medical, dental, vision, basic life and AD&D insurance, • Paid Company and Floating Holidays: 7 paid company and 2 floating holidays annually, • Vacation: 2 weeks accrued paid vacation based on length of service. Vacation may vary by level., • Sick and Safe Time: 80 hours annually

Job DescriptionDescription: Fisher Associates, P.E., L.S., L.A., D.P.C. has created an internship program to engage college students that are ready to get their foot in the door and gain hands on experience! By using the skills and knowledge gained from academic study and combining with an internship, the student's transition from student to professional is enhanced. Students must be organized, self-motivated, and dependable. We have multiple sectors/service lines in which an internship can be completed as selected by the student. Under direct supervision, the student will perform routine tasks and work on a wide variety of projects gaining a well-rounded learning experience. Who: Students currently enrolled in a Civil Engineering degree program (or related field) What: Obtain hands-on professional work experience with our Transportation, Land Development or Energy groups in various tasks related to design, analysis, and implementation of projects. Where: At any of our office locations! When: Fisher Associates accepts internship applications year-round. Internship timeline is dependent on manager needs and student schedule. The primary function of this role is responsible for, but not limited to, the following: • Exhibit behaviors that align with the Fisher Values: Aspire to Excellence, Teamwork and Respect, Owning our Results and Empowered Employees., • Establish and maintain strong client relationships adhering to the Fisher Clientship philosophy., • Perform engineering analysis and design., • Prepare cohesive and organized engineering calculations., • Assist technical staff with day-to-day design tasks for several types of projects., • Conduct basic engineering functions including design calculations and cost estimating under supervision., • Collaborate as a member of the team to realize project deliverables and deadlines., • Prepare construction specifications under direct supervision., • Assist senior engineers or designers with organizing/preparing reports, studies, or bid packages., • Participate in site visits and field inspections to gather data and assess project conditions, as needed. Fisher Associates, P.E., L.S., L.A., D.P.C. is a consulting engineering and professional services firm serving the Transportation, Land Development and Energy market sectors. Our comprehensive services include landscape architecture, planning, engineering, environmental, survey, GIS and construction representation. Fisher Associates, P.E., L.S., L.A., D.P.C. is headquartered in Rochester NY, with eight offices throughout NY, PA and TX. The culture at Fisher is friendly, respectful, and a true team environment. We own our responsibilities and results, continuously seeking to improve and empower our employees. Requirements: Education & Experience • Currently pursuing a bachelor’s degree in Civil Engineering, Civil Engineering Technology or related field., • Strong academic performance in relevant coursework., • Aspire to excellence, consistently seek to improve, and demonstrate high quality work at all levels., • Team player: collaborate effectively at all levels; treat coworkers, clients and vendors with respect in all interactions; seek to listen effectively, understand others, and build trust., • Own and accept responsibility for results., • Honest, transparent, and trustworthy., • Proactive, self-motivated, and eager to learn., • Strong critical thinking and problem-solving skills., • Ability to consistently demonstrate sound judgement., • Excellent and professional communication skills both written and verbal., • Excellent organizational, project management and time management skills., • Ability to work in a fast-paced environment and manage multiple tasks simultaneously., • Strong attention to detail., • Exhibit flexibility with assignments, workflow, or project changes., • Listen and respond to feedback in a positive manner. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Prolonged periods sitting at a desk and working on a computer., • Must be able to lift to 15 pounds at a time., • Must be able to travel to various project sites., • Must be able to access and navigate construction sites and job areas., • Ability to transverse uneven grounds. Salary Range: $23/hour Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Fisher Associates embraces a family-feel culture and welcomes all newcomers with open arms. Fisher Associates does not discriminate in hiring or employment on the basis of age, race, creed, color, national origin (including ancestry), religion, gender or sex, sexual orientation (including transgender status, gender identity or expression), pregnancy (including childbirth, lactation, and related medical conditions), disability, reproductive health decision making (including, but not limited to, the decision to use or access a particular drug, device, or medical service), marital status, partnership status, caregiver status, domestic violence victim status, familial status, military status, unemployment status, genetic information (including genetic characteristics), citizenship or immigration status, or any other protected status under federal, state, or local laws.

Job DescriptionDescription: Infrastructure + Mobility Group Manager-NY Transportation Engineering | Project Delivery | People Leadership Lead high-performing teams. Deliver meaningful infrastructure. Shape how communities move. Fisher Associates is seeking an experienced project manager to lead project delivery and people management for transportation planning and design projects across Upstate New York and the Hudson Valley. This senior leadership role is ideal for a licensed Professional Engineer (PE) with a strong background in transportation engineering, who is ready to step into a visible role focused on project management, team leadership, and client relationships. In this role, you will manage and mentor Project Managers, oversee project performance, and directly manage select projects while ensuring the successful delivery of transportation projects for clients such as NYSDOT and local municipalities. You will set direction, balance workloads, support professional development, and ensure projects are delivered on time, on budget, and in alignment with client expectations. If you are ready to advance your transportation leadership career and make a meaningful impact, we encourage you to apply and start the conversation with us. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide, empowering our teams to drive meaningful change through their work. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as an Infrastructure + Mobility Group Manager • Lead and grow a collaborative, high-performing team aligned with the firm’s mission, values, and commitment to design excellence., • Provide hands-on leadership that empowers Project Managers, supports professional development, and fosters accountability and engagement across locations., • Position the Infrastructure + Mobility group for long-term success through strong team morale, consistent performance, and sustainable growth., • Oversee transportation projects, ensuring clear priorities and delivery on time, on budget, aligned with scope and quality expectations., • Effectively manage project financials, staffing, and schedules while proactively resolving technical, schedule, or budget challenges., • Serve as primary client contact, building trusted relationships and delivering exceptional service to public and private sector clients., • Contribute to business planning and proactively drive new work with existing and prospective clients., • Lead proposal development and participate in interviews, promoting Fisher’s design capabilities and market presence., • Mentor, coach, and set expectations for staff while supporting performance and career development., • Navigate and support complex public processes and municipal approvals related to transportation projects., • B.S. degree in Civil Engineering or related field, • 15+ years minimum in transportation, roadway, or highway engineering, • Professional Engineering License (PE), • 5 years minimum of project management experience, • Strong financial acumen, with the ability to use dashboards, metrics, and data to drive performance, accountability, and results., • Familiarity with NYSDOT design standards required, • Prior experience successfully managing and leading a team, • Excellent leadership, communication, and interpersonal skills, • Proven client relationship and business development success in the transportation sector, • Proficiency in MS Office; Experience with MicroStation preferred, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Superior organizational and planning skills with keen attention to detail, • Highly adaptable and proactive in meeting deliverables and deadlines, • Curious, improvement-minded, and always seeking better solutions, • You are empowered to deliver results through collaboration, trust, and ownership., • Your voice matters shaping decisions in an inclusive and transparent culture., • Your growth as a leader is a priority, supported by clear career paths and continuous learning., • You thrive in a positive culture that celebrates wins and keeps work fun and enjoyable., • Your leadership journey focuses on developing, coaching, and empowering high-performing teams., • Your success is supported by a flexible work environment so you can thrive professionally and personally. Your Impact Matters, Your Career Thrives. Work on engaging transportation projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental and Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholder Opportunity, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate based on any protected status under federal, state, or local law. #LI-Hybrid

Job Description RF Field Engineer – UPNY C Squared Systems, LLC is an RF engineering, consulting, and software development company specializing in providing services for seamless wireless coverage from RF analysis to design and implementation of DAS systems and Wi-Fi networks to remote monitoring and management of complex multi-vendor environments. Site Portal®, a customizable Web-based software, was engineered by C Squared Systems to remotely monitor and manage these complex multi-vendor environments. Since 1999, C Squared Systems has executed turnkey in-building wireless solutions using state-of-the-art analysis tools to deliver RF solutions that exceed project scope and customer expectations. Our experience, technical expertise, and diverse projects in the wireless realm have allowed C Squared Systems to continually evolve as new technologies are developed and the demands of our customers change. Description: We are currently seeking an entry level Radio Frequency Field Engineer to join our team in our Syracuse NY office. This position is for full time employment. The candidate will perform site surveys, system designs, gathering existing data and coverage as well as general site information. System troubleshooting, project management, activations, maintenance tickets, optimization, testing as well as some construction will all be a part of the job duties. The ideal candidate should be highly motivated and have the ability to work in a fast paced environment. Applicants must possess strong technical aptitude and be comfortable working in high pressure situations. The candidate will be interacting with customers and co-workers on a daily basis, and must be able to provide timely and detailed updates. Field Engineer will be exposed to various RF applications and should understand the best practices for any given situation. This position will require the individual to be in the field approximately 80% of the time. The candidate must be willing to travel with occasional overnight stays. Responsibilities: • Perform site surveys and in-depth site walkthroughs., • Troubleshoot and repair systems for optimal performance., • Project managing the construction and installation of Distributed Antenna Systems, keeping to all building codes and customer construction requests., • Perform system tests using scanners, spectrum analyzers, transmitters, and other electronic test equipment., • Design complete an accurate Distributed Antenna Systems using iBwave software., • Take lead on system commissioning, integrations, and activations., • Work hands on with system components such as antennas, fiber optics, coax, and RF amplifiers., • Multi-task projects on a day-to-day basis., • Bachelor of Science in Electrical or Mechanical Engineering from an ABET - accredited academic institution., • Understanding of engineering design concepts, testing procedures, and possessing the ability to adapt to new procedures, equipment, and technologies., • Experience with basic construction tools (drills, screwdrivers etc.) and construction practices., • Ability to multitask and keep projects moving through different phases of their lifecycle by staying organized and communicating., • Ability to receive and give direction., • Strong oral and written communication skills., • Ability to work with a team diverse in skill, experience and knowledge., • Experience with 2D modeling programs such as AutoCad or Draftsight is preferred but not required., • Proficient in basic computer applications. (Outlook, Word, Excel, etc.)

Job DescriptionDescription: Bridge Project Engineer (PE) - Civil/Structural Design the Bridges That Connect Communities Fisher Associates is seeking a Bridge Project Engineer (PE) to lead the design, analysis, inspection, and load rating of critical transportation infrastructure. This is an exciting opportunity for a licensed Civil or Structural Engineer who wants to make a visible, lasting impact on public infrastructure while working with a firm known for technical excellence and innovative solutions. As a key member of our civil/structural engineering team, you’ll collaborate on multidisciplinary projects, applying your bridge engineering expertise in a supportive, growth-oriented environment. If you have hands-on experience in bridge design and transportation structures and a passion for building safe, sustainable infrastructure, we’d welcome the opportunity to connect with you. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide, empowering our teams to drive meaningful change through their work. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Bridge Project Engineer • Lead bridge design, including load rating, structural analysis, and foundation design., • Develop design plans, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Participate in project planning meetings and align tasks to meet scope, schedule, and budget requirements., • Support project managers with schedules, documentation, and presentations., • Ensure designs adhere to state and local standards, regulations and safety codes., • Review plans and technical deliverables to ensure quality, accuracy, and constructability., • Conduct field inspections, prepare detailed bridge inspection reports and analyze foundation design., • Provide technical support during construction, respond to RFIs and attend site visits., • Collaborate and communicate effectively with clients, subconsultants and regulatory approving agencies., • B.S. degree in Civil Engineering or a related field, Master’s preferred., • 10+ years of transportation experience with a strong background in structures and bridge design., • Professional Engineering License (PE) preferred or ability to obtain it., • Proficiency in MicroStation, STAAD and Bridge Design Software., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred)., • Professional performance aligned with Fisher’s Mission, Vision, Core Values, and Clientship philosophy., • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment., • Superior organizational and planning skills with keen attention to detail, • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths, career discussions and tuition assistance., • You thrive in a culture that keeps work fun and fosters a relaxed, easy-going atmosphere., • Your journey is supported by a collaborative environment that promotes mentorship and ongoing learning. Your Impact Matters, Your Career Thrives. Work on impactful bridge engineering design projects that strengthen your community while providing diverse, challenging opportunities for professional growth and career advancement. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law. #LI-Hybrid

Job Description Hidden Level is transforming airspace safety with innovative, scalable drone detection and airspace technology. We provide real-time, actionable data to enhance security across various environments. As we expand, we're looking for a Senior Digital Hardware Engineer who will apply their skills and experience to lead the design of custom hardware and firmware for cutting-edge sensor and communication systems. Location: This position is located in the Syracuse, NY office with the potential for hybrid arrangements. Responsibilities: • Derive and document Digital Hardware system requirements working collaboratively with multiple technical disciplines, • Define custom multi-layer PCB architectures and perform part selection, schematic design, and aid in layout activities, • Perform functional test and verification activities for new hardware and aid in production transition and support, • Architect and design HDL solutions for the latest Xilinx FPGAs and SoC devices such as Ultrascale+ and RFSoCs, • Design and implement efficient solutions for data acquisition, digital signal processing, command and control, external hardware interfaces, and high-speed communication protocols, • Use scripting languages such as Python and Bash to automate and improve workflows, • Perform integration and test of hardware and HDL designs at subsystem and system levels, • Provide information in support of project planning, execution, and oversight What We’re Looking For: • A desire to own project assignments and work creatively and collaboratively on cross-disciplinary teams to deliver solutions that impress our customers and move our industry forward., • An open-minded approach to solving challenges, and proactive development of backup plans to ensure the team can hit the mark even when encountering the unexpected., • A mindset trained on long-term goals and objectives, balanced with making demonstratable incremental steps along the way to meet the pace of our industry., • Excellent written and verbal communication skills to efficiently convey complex ideas, coupled with an ability to listen, question, and understand stakeholder needs. Required Qualifications: • Bachelor's degree in Electrical Engineering, Computer Engineering, or related field, • 5+ years related professional experience, • PCB design experience including the design of digital and analog circuits including FPGAs, microcontrollers, memories, and high-speed data converters, • Familiarity with VHDL and/or Verilog to configure FPGAs and other embedded systems, • Applied experience testing and validating analog and digital hardware using oscilloscopes, network analyzers, logic analyzers, spectrum analyzers, etc., • 10% travel. Preferred Qualifications: • Experience with Altium design environment, • Experience with modern Xilinx FPGAs and the Vivado design environment, • Experience with Communication and Sensor systems, Digital Signal Processing, Software Defined Radios, RF System Design, • Experience providing design oversight and detailed design review feedback, • Experience with Matlab, Python, Linux Compensation and Benefits: Hidden Level offers a competitive salary and a comprehensive benefits package, including health insurance, paid parental leave, flexible time off, 401(k) with employer contributions, life insurance, and disability insurance. The company also provides a remote or hybrid work environment and potential stock options. Salary Range: The anticipated salary range for this position based out of Syracuse, NY is estimated at $109,000 to $136,000 annually. Please note that the salary information is a general guideline only. Hidden Level considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer Equal Opportunity Employer: Hidden Level is an Equal Opportunity/ Affirmative Action employer. All qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category. Security Note: Due to the nature of Hidden Level’s technology, only U.S. citizens can be considered for this position.

Job Description Hidden Level is transforming airspace safety with innovative, scalable drone detection and airspace technology. We provide real-time, actionable data to enhance security across various environments. As we expand, we're looking for an RF Engineer to join our team to help us accelerate our product development initiatives. Location: This position is onsite in Syracuse, NY office, with the potential for hybrid arrangements. Responsibilities: • Derive and document RF system requirements working collaboratively with multiple technical disciplines, • Develop innovative RF subsystem and system architectures, • Simulate, model, design, select and characterize components, • Design, implement, test, and integrate RF circuit cards and subsystems for use in our cutting-edge communications, radar, and other sensor systems, • Participate in cross-functional technical design reviews, • Perform and support integration and test activities and events, • Support or perform project planning, execution, and oversight, • A desire to lead development projects and work creatively and collaboratively on cross-disciplinary teams to deliver solutions that impress our customers and move our industry forward., • An open-minded approach to solving challenges, and proactive development of backup plans to ensure the team can hit the mark even when encountering the unexpected., • A mindset trained on long-term goals and objectives, balanced with making demonstratable incremental steps along the way to meet the pace of our industry., • Bachelor's degree in Electrical Engineering, or a related technical field., • 5+ years of professional experience, • Demonstrated skills in software simulation platforms such as Ansys HFSS, Matlab, or Python, • Experience and interest in one or more of the following areas:, • Antennas and Phased Arrays, • Receivers, • Exciters, • Simulation, • Anechoic Chamber Measurements, • Schematic Capture, • Advanced degree in Electrical Engineering, or a related technical field. Compensation and Benefits: Hidden Level offers a competitive salary and a comprehensive benefits package, including health insurance, paid parental leave, flexible time off, 401(k) with employer contributions, life insurance, and disability insurance. The company also provides a remote or hybrid work environment and potential stock options. Salary Range: The anticipated salary range for this position based out of Syracuse, NY is estimated at $109,000 to $136,000 annually. Please note that the salary information is a general guideline only. Hidden Level considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer Equal Opportunity Employer: Hidden Level is an Equal Opportunity/ Affirmative Action employer. All qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category. Security Note: Due to the nature of Hidden Level’s technology, only U.S. citizens can be considered for this position.

Job Description Challenging Bridge Projects. Grow your Career. Build the Future. Are you a skilled bridge engineer with a passion for delivering high-quality infrastructure solutions? We’re seeking an entry-level Bridge Engineer to join our Syracuse Bridge Department and help us deliver some of the largest and most complex infrastructure projects in Upstate New York. Our Bridge team is expanding, and we’re excited to offer you the opportunity to be part of the largest bridge program in our team's history. With active projects in nearly every county across the region, you'll play a key role in shaping critical infrastructure. We proudly serve a diverse range of clients, including NYSDOT, NYSTA, and numerous counties, cities, and villages throughout New York State. This unprecedented workload not only brings meaningful technical challenges to keep you engaged and learning, but also opens the door to unlimited career growth. If you're looking to make a real impact while advancing your professional journey, there's never been a better time to join us. In this role, you’ll support bridge engineering projects from initial planning and design through construction support. Working under the guidance of senior engineers, you’ll contribute to structural analyses, prepare design documents, and assist with field inspections. You’ll bring a strong foundation in civil or structural engineering, a willingness to learn, and a collaborative mindset to help deliver innovative, sustainable, and cost-effective solutions. You’ll also play a key role in shaping two of the most impactful infrastructure efforts in Upstate New York: the I-81 Viaduct Project and the Onondaga County/Micron Transportation Improvements—projects that will redefine mobility and connectivity in Central New York. With these transformative projects driving unprecedented momentum, our team is growing rapidly—and so are the opportunities. You’ll step into a role with clear pathways for advancement, the chance to shape the future of our department, and the support, visibility, and resources to take your career wherever you want it to go. Position Responsibilities • Bridge Design: Work on every aspect of bridge design projects, including inspection, structural calculations, geometry layout, plan development, and construction coordination., • Project Development: Assist in progressing bridge projects through the design process, including report writing, environmental permit coordination, and development of contract specifications., • Bachelor’s degree in Civil Engineering or a related field., • 0-3 years of experience in bridge design, • Proficiency in AutoCAD/Civil 3D and/or MicroStation/OpenRoads Estimated Salary Range: $73,424 – $92,352* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job DescriptionDescriptionThe Control Systems Sales Engineer is responsible for developing and securing automated control system projects across commercial, industrial and manufacturing applications. This role focuses on creating innovative process control solutions while maintaining strong profitability. The ideal candidate will combine deep technical knowledge of industrial automation with consultative sales skills to solve complex client challenges. Key Responsibilities • Develop and secure profitable automation and control system projects while meeting quarterly and annual sales targets, • Design and propose integrated control solutions building automation systems, • Create detailed technical proposals including system architecture, scope of work, and accurate cost estimates, • Provide technical guidance on process optimization and control strategies, • Conduct site surveys to assess existing systems and recommend improvements, • Stay current with industrial automation trends and new control technologies, • Develop and maintain relationships with system integrators and end users, • Provide technical presentations and demonstrations of control system solutions, • Bachelor's degree in Electrical Engineering, Computer Engineering, or related field preferred, • 3+ years of technical sales and estimating experience in industrial automation, • Computer networking and server knowledge a plus, • Proven track record of meeting sales targets in a technical environment, • Excellent project estimation and scope development skills, • Strong presentation and interpersonal communication abilities, • Experience with major automation platforms (e.g., Allen Bradley, Siemens, Honeywell), • Knowledge of industrial networking and communication protocols, • Understanding of manufacturing processes and industrial applications, • Competitive base salary with performance-based incentives, • Comprehensive medical and dental benefits (employer/employee contribution), • 401(k) plan with company contribution, • Paid Time Off (PTO) and sick days, • 6 paid holidays, • Career advancement opportunities tied to company growth

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Are you a skilled electrical engineer with a passion for delivering high-quality infrastructure solutions? We’re seeking a Senior Project Engineer to join our Northeast Electrical Engineering team and take a leading role in the design and execution of critical facilities and infrastructure projects throughout the Northeast. In this role, you’ll lead projects through the full lifecycle—from planning and design to construction support—while mentoring junior engineers and fostering strong client relationships. You’ll bring deep technical expertise in electrical engineering design and a collaborative mindset to help deliver innovative, sustainable, and cost-effective solutions. With the opportunity to work on transformative projects, our team is growing rapidly—and so are the opportunities. You’ll step into a role with clear pathways for advancement, the chance to shape the future of our team, and the support, visibility, and resources to take your career wherever you want it to go. Position Responsibilities • Project Leadership: Oversee the entire project lifecycle, from initial concept development through construction and closeout. Provide technical leadership and ensure quality and efficiency at every stage., • Design Expertise: Apply advanced knowledge in transportation design to develop creative, efficient solutions for roadway and infrastructure projects. Prepare design reports, plans, specifications, and bid documents., • Team Development: Mentor and support junior engineers, sharing technical knowledge and project management best practices. Foster a collaborative, growth-oriented team culture., • Bachelor’s of Science or Technology degree in electrical engineering., • Licensed Professional Engineer (PE) in New York State., • Minimum 8 years of experience in electrical engineering design, with a strong focus on Public and Private facilities infrastructure projects., • Proficiency in AutoCAD and Revit., • Experience with Power Systems Analysis, including Short Circuit, Coordination and Arc Flash analysis., • Proficiency with the National Electric Code., • Experience with the layout and design of medium and low voltage distribution systems., • Experience with the layout and design of lighting systems and controls. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description INFRA TECH ENGINEERING is a multi-discipline engineering firm providing highway design, bridge design, civil engineering, bridge inspection, construction inspection and materials testing service for transportation infrastructure projects throughout New York for over 43 years. INFRA TECH ENGINEERING is headquartered in NYC with additional offices in Syracuse, Binghamton, Albany, Westchester and Long Island. We offer competitive salary and benefit packages including PPE allowance to our full-time employees. INFRA TECH ENGINEERING is currently seeking transportation construction inspectors (all levels) to join our construction inspection team for highway and bridge projects throughout New York State, including the NYC area. We currently have needs in Albany, Essex, Greene, Rensselaer, Saratoga, Schenectady, Warren, Washington, Syracuse, and Binghamton. Qualified candidates will fill Construction Inspector (NICET II), Senior Inspector (NICET III), Chief Inspector (NICET IV), and Office Engineer (NICET III/IV) positions, in NYSDOT Regions 1, 3 and 9 along with local municipalities throughout New York. Previous experience with construction inspection of NYSDOT heavy highway and bridge construction projects or similar is preferred. NICET certifications are preferred but not required. Certifications such as ACI Concrete Field Testing, ATSSA, NETTCP Soil & Aggregate, NACE Level 1, SSPC C-1 are desired. Candidates must have a valid driver’s license and a reliable vehicle. Responsibilities: • Review of plans, documentation of work activities as well as quantity calculations, • Inspection of work to ensure conformance with approved plans and specifications, including field inspection and office engineering Qualifications: • Ideal candidates will have experience working with NYSDOT Standard Specifications for Construction and Materials and NYSDOT Manual of Uniform Record Keeping (MURK), • Candidates with standard industry certifications from NICET, ACI, NACE, NETTCP, or ATSSA are preferred, • Candidates should also have good oral and written communication skills., • NYSDOT and/or locally administered Federal Aid project experience preferred., • Experience with NYSDOT Site Manager software a plus. Pay: $35.00 - $65.00 per hour Requirements MINIMUM REQUIREMENTS: • Maintain a valid driver's license, • Possess a personal vehicle for use on or around a job site, • Read, write, and understand plans and directions given in the English language, • Basic computer skills with the ability to create and edit Microsoft Word and Excel documents, create Outlook emails and utilize SharePoint and Microsoft Teams to communicate with other team members, • Able to stand for approximately 3 hours minimum a day up to 8 hours, • Able to traverse a construction job site consisting of uneven ground varying in height and consistency of material, with a variation of elevation 19" or less (mud, gravel, rutted ground, etc.), • Able to climb and leave a ladder to a platform varying from 6' to 20', • Able to wear and operate personal fall arresting apparatus, and work at a height of 6' or higher, • Able to wear ITE required PPE, i.e., hard hats, safety vest, work boots, and/or safety glasses/goggles while working, • Able to move equipment or inspection specimens weighing up to 50 pounds Benefits Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Flexible schedule, • Free health insurance, • Health savings account, • Life insurance, • Paid time off, • Professional development assistance, • Retirement plan, • Tuition reimbursement, • Vision insurance

Job DescriptionDescription: Transportation Highway Group Technical Manager – Civil Engineering Lead with Purpose. Design What Moves Communities. Fisher Associates is seeking a Transportation Highway Group Technical Manager / Civil Engineer to provide senior-level technical leadership on highway and roadway design projects across Upstate New York. This opportunity is ideal for an experienced Civil Engineer or Transportation Engineer who is passionate about transportation infrastructure, technical excellence, and mentoring engineers. In this role, you will lead hands-on technical design, ensure high-quality deliverables, and support projects for clients such as NYSDOT and local municipalities. You will play a key role in shaping project outcomes and team success within a collaborative, community-focused environment. At Fisher Associates, we value innovation, integrity, and leadership. Join a firm where your expertise is recognized, your growth is supported, and your work makes a lasting impact. Apply today to advance your civil engineering leadership career with Fisher Associates. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide, empowering our teams to drive meaningful change through their work. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Transportation Highway Group Manager • Deliver transportation projects that improve mobility, safety, and quality of life in local communities., • Foster a high-performing, motivated team through clear expectations, constructive feedback, mentoring, and career development., • Oversee the design and execution of highway engineering projects, ensuring compliance with industry standards, regulations, and client requirements., • Serve as a technical lead, guiding the team on best practices, decisions, and troubleshooting as needed., • Implement and oversee quality control processes and conduct technical audits to ensure high standards., • Maintain effective communication with project managers, clients, and cross-functional teams., • Ensure effective resource allocation, adequate staffing, and utilization to meet project and team goals., • Assist in recruiting top engineering talent who align with the team’s technical excellence and company culture., • Lead continuous improvement initiatives to enhance team performance., • Stay current with transportation design trends and emerging technologies, integrating them into project solutions., • Contribute to the organization's technical strategy and help forecast future technical needs. Requirements: What You Bring, Your Expertise as a Transportation Group Highway Manager • B.S. degree in Civil Engineering, • 8-15 years’ experience in transportation, roadway, or highway engineering, • Professional Engineering License (PE) preferred or ability to obtain it, • Prior staff management preferred, • Proficiency in MS Office; MicroStation preferred, • Familiarity with NYSDOT design standards preferred, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions, • You are empowered to deliver results through collaboration, trust, and ownership., • Your voice matters shaping decisions in an inclusive and transparent culture., • Your growth as a leader is a priority, supported by clear career paths and continuous learning., • You thrive in a positive culture that celebrates wins and keeps work fun and enjoyable., • Your leadership journey focuses on developing, coaching, and empowering high-performing teams. Your Impact Matters, Your Career Thrives. Lead and contribute to meaningful transportation projects that improve local communities while advancing your technical leadership and career growth. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law.

Job Description We are currently hiring a mid-level Mechanical Engineer in our Building Engineering Division – Energy Infrastructure team in our Syracuse, Elmira, or Ithaca, NY offices. LaBella’s Energy Infrastructure team provides comprehensive energy efficiency and renewable energy consultancy, including feasibility analyses, and design of mechanical systems. Our engineers are well-versed in all aspects of building and energy systems design relating to a variety of new construction, renovations, and design/build projects for a variety of clientele. The Mechanical Engineer will work with our engineers in a lead role on a variety of decarbonization/electrification projects to develop projects in feasibility stages all the way through design and construction. A successful candidate will be able to work well in a team, mentor junior engineers, and communicate effectively with clients. Duties • Lead design of building HVAC systems and district energy systems, • Field investigations to document existing conditions, • Selection and calculations for design purposes, • Work with Jr Engineers to develop and review project drawings and documentation, • Interact directly with clients by completing analysis of design options, cost benefit comparisons, and communicating results to assist in decision making process., • 8-10 years of relevant experience, • Bachelor’s degree in Mechanical Engineering is preferred, • Well-rounded experience in HVAC and hydronic system design, • Preferred: experience designing geothermal or district energy systems, • Experience with Revit or AutoCAD, • New York State Professional Engineer’s license is a plus, • Excellent verbal and written communication skills Salary Range: $80,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview We are seeking experienced Inspectors to be responsible for construction/transportation inspection services on a variety of projects such as bridge/roadway/rail road/intersection/trail repair, replacement and new construction in these NY State cities and locations: Counties of Albany, Broome, Cayuga, Cattaraugus, Chautauqua, Chenango, Clinton, Cortland, Delaware, Erie, Genesee, Jefferson, Lewis, Madison, Monroe, Niagara, Oneida, Onondaga, Ontario, Oswego, Otsego, Putnam, Schoharie, Sullivan, Tioga, and Tompkins, as well as the greater Syracuse, Buffalo, and Albany areas. Opportunities may also exist in support of our Railroad efforts in New Jersey and Northern Pennsylvania. Why Take a Field Assignment With C&S? • We provide full construction support for our field staff throughout the entire assignment., • We offer a great employee benefits package including health insurance, paid holidays, paid vacation, sick time, life/disability insurances and much more., • It is our intent to provide continued employment ranging from temporary short-term assignments up to 1 year in length beginning March/April 2021 to multiyear assignments for candidates who possess additional skills in preparing contract documents, engineering workups and estimates., • We provide paid orientation/training and attentive management support including 24/7 emergency contact., • We provide personal safety equipment at no cost; some inclement weather gear and a clothing allowance for some work related items (i.e. steel toe boots)., • We reimburse work related mileage and tolls., • We pay for work related certifications including paid time off to take test and cost of testing., • Competitive hourly rate and a monthly cell phone stipend. Position Responsibilities: • An Office Engineer assists the EIC/Resident Engineer on daily management of construction inspection projects, providing technical and administrative information to others working on the project to ensure that work complies with all engineering standards, codes, and specifications. Responsibilities include, review of daily inspection reports and payment quantities in accordance with NYSDOT/MURK requirements, prepare change orders for overruns, changed conditions, and additional work as well as other project administration roles., • The Office Engineer must also be familiar with corporate policies and safety requirements., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Communicate incidents, accidents, near misses, potential hazards, and unsafe working conditions to a supervisor or the Health and Safety Department as soon as identified. Required Knowledge, Skills & Abilities: • Desired 10 years of related experience, or similar position with experience in the construction field and transportation projects., • NICET III or equivalent experience, or EIT designation, • Bachelor's Degree desired. Associate's Degree acceptable with relevant experience, • Excellent communication skills, • Ability to supervise or coordinate the work of others, • Knowledge of NYSDOT's Equitable Business Opportunities (EBO) software Estimated Compensation Range: $83,200 - 101,920/year* Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description We are currently hiring a Mechanical Engineer in our Building Engineering Division at our Syracuse, NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Mechanical Engineer will work with engineers as part of a project team to provide HVAC, plumbing, and fire protection designs, studies and technical support as required to fulfill project requirements. Typical projects will involve field work, design, and construction administration services. A successful candidate will be able to work well in a team to develop concepts, strategies, designs, drawings, specifications and reports for Building and Renovation projects. Duties • System selection and calculations for design purposes, • Conduct field work to document existing conditions, • Work with Jr Engineers to develop drawings with building modeling software, • Work independently and as part of a team to complete project designs, • 4 – 6 years of experience working at an A/E consulting firm is preferred, • Bachelor’s degree in Mechanical Engineering is preferred, • Well rounded experience in HVAC, plumbing, and fire protection, • Experience with Revit or AutoCAD is preferred, • Field experience is preferred, • New York State Professional Engineer’s license is a plus, • Ability to work well with a team and good analytical skills Salary range: $70,000.00 - $90,000.00 per year Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description We are LOTTE BIOLOGICS! Delivering Therapies That Enable a Healthier World. A new company, built on 80 years of tradition. We embody our core values of being Inspired by Science, Embracing Diversity, Fostering Talent, and Connecting Lives. Our mission is to be the most trusted partner in the industry, with high standards of quality and continuous innovation, to reliably deliver benefits for patients worldwide. Position Summary The Facilities Engineer is responsible for the compliant operation, maintenance, and continuous improvement of GMP-critical facility programs supporting the manufacture of life-saving medicines within a Contract Development and Manufacturing Organization (CDMO) environment. This role provides ownership of pest control, utilities, and facilities systems across a multi-client manufacturing operation, ensuring continuous inspection readiness, customer compliance, and operational excellence. This role leads maintenance execution, contractor oversight, system shutdowns, and investigations related to GMP systems, while delivering facility services in alignment with client agreements, regulatory expectations, and business objectives. The role serves as a subject matter expert for facility programs during customer audits, regulatory inspections, and technology transfers. Working cross-functionally with Manufacturing, Quality, HSE, Engineering, and client stakeholders, this role drives capital projects, improvement initiatives, and energy conservation programs to ensure the site remains reliable, compliant, and competitive as a CDMO partner. This role requires strong technical expertise, customer-focused communication skills, and the ability to operate effectively in a fast-paced, customer-driven environment. The position operates with significant autonomy and may include direct supervision of employees and contractors within a matrix organization. Duties & Responsibilities Compliance and Inspection Readiness • Maintain GMP facility programs in compliance with local, state, federal, and international regulations., • Ensure inspection readiness of facility systems; serve as SME during audits and regulatory inspections., • Oversee preventive maintenance and repairs for building envelope, pest control, electrical, mechanical, HVAC, cooling towers, and security systems., • Coordinate system shutdowns and lead investigations related to GMP-critical systems., • Identify and implement energy conservation, cost savings, and reliability improvements., • Drive facility-related capital projects (HVAC, clean utilities, infrastructure upgrades) on time, within budget, and in compliance with safety and client requirements., • Train and develop in-house technicians and contractors on SOPs and compliance requirements., • Build and sustain strong relationships with internal and external stakeholders, including Manufacturing, Quality, HSE, and regulatory agencies., • Bachelor's degree in Engineering (Mechanical, Electrical, Chemical, or related discipline) or equivalent technical experience required., • 4–6 years of progressive experience in facilities engineering, maintenance, or utilities management within a GMP-regulated pharmaceutical, biotechnology, or API manufacturing environment preferred., • Experience with GMP compliance, facility systems (HVAC, clean utilities, pest control, GMP cleaning), and capital project execution strongly desired., • Project management experience (budgeting, scheduling, vendor oversight) is a plus., • Technical Expertise in facilities engineering, including mechanical, electrical, HVAC, clean utilities, pest control, and GMP cleaning systems., • Strong understanding of GMP regulations, quality systems (change control, investigations, CAPA), and applicable standards (FDA, EMA, OSHA, DEC)., • Project Management Skills: ability to manage budgets, schedules, contractors, and capital projects effectively., • Analytical and Problem-Solving Skills for troubleshooting complex facility and utility issues., • Ability to interpret technical drawings and documentation and ensure compliance with good engineering practices., • Effective Communication Skills, including technical writing and presentation abilities for audits, inspections, and cross-functional collaboration., • Customer Service Orientation with the ability to build and maintain strong relationships with internal and external stakeholders., • Adaptability and Autonomy: capable of working independently in a fast-paced, matrixed environment with minimal supervision., • Computer Proficiency in MS Office Suite and familiarity with CMMS or other maintenance management systems. The Facilities Engineer role requires the ability to perform a range of physical activities essential for maintaining and troubleshooting GMP-critical facility systems. These include: • Lifting and carrying items up to 50 lbs safely, using proper ergonomic techniques., • Bending, stooping, twisting, crouching, squatting, and sitting for extended periods during inspections and maintenance tasks., • Walking on level surfaces throughout the facility, including production and utility areas., • Repetitive use of arms, hands, and wrists for tool handling, equipment adjustments, and documentation., • Grasping and fine manipulation of small components and instruments., • Operating vehicles or motorized equipment within facility grounds as required., • Kneeling and working in confined spaces during equipment servicing., • Reaching and working overhead (above shoulder level) for extended periods when accessing ceiling-mounted systems or piping., • Use of foot controls for certain equipment operations., • Visual acuity for detailed inspections and troubleshooting (corrective lenses and color vision aids permitted)., • Exposure to temperature variations, noise, and industrial environments typical of GMP manufacturing facilities., • Ability to wear personal protective equipment (PPE) including safety glasses, gloves, hearing protection, and respiratory protection as required. Supervision may include FTEs and contractors; including objective setting for the department. Travel <5% travel required for this position Target Bonus 10% Work Location: East Syracuse, NY New York Pay Range$76,000—$113,000 USD We are an Equal Employment Opportunity ("EEO") Employer. We believe that women, people of color, veterans and LGBTQ communities must participate in the work we do, so we strongly encourage applications from people with these identities or who are members of underrepresented communities! If this is the work that you want to do, in a culture of inclusion and excellence with the goal of making our world to be a healthier place, then please apply today!

Job Description We are LOTTE BIOLOGICS! Delivering Therapies That Enable a Healthier World. A new company, built on 80 years of tradition. We embody our core values of being Inspired by Science, Embracing Diversity, Fostering Talent, and Connecting Lives. Our mission is to be the most trusted partner in the industry, with high standards of quality and continuous innovation, to reliably deliver benefits for patients worldwide. Position Summary The Senior Project Manager, Facilities Engineering plays a key role in driving complex capital projects that enhance and expand our biologics manufacturing capabilities. This individual will lead multiple high-impact initiatives simultaneously—ensuring projects are delivered safely, on time, and within budget while minimizing disruption to ongoing operations. In this role, you'll oversee the design and execution of facility and process-related capital projects such as HVAC and utility system upgrades, laboratory and infrastructure renovations, cryogenic storage expansions, and biologics cell culture or purification improvements. You'll also provide technical guidance to Operations and cross-functional partners to support the introduction of new technologies, including automation, single-use systems, and process analytical tools (PAT). The Senior Project Manager will collaborate closely with Maintenance, Calibration, Validation, Automation, and Facilities teams from project initiation through completion—ensuring compliance with engineering best practices, regulatory requirements, and company standards while driving continuous improvement across site infrastructure. Duties & Responsibilities • Completes regular assignments independently, with minimal supervisory guidance. Seeks assistance as needed for issues not covered by established policies or procedures. Work is reviewed periodically for progress and evaluated upon completion for overall adequacy and results., • Designs and manages multiple facilities-related capital projects (including HVAC and utility systems, process improvements, infrastructure repairs, and renovations) to ensure delivery on time, within budget, safely, and in alignment with client and site requirements., • Ensures all projects comply with good engineering practices, LBA policies, applicable regulations, and codes., • Coordinates projects with site PM/PdM, Calibration, Utilities, and other supporting departments from initiation through closure to ensure systems are properly designed, constructed, and documented., • Coordinates facility-related activities to optimize operations and reliability while minimizing capital expenditures., • Promotes a strong safety culture by ensuring safety is prioritized throughout all project phases and providing leadership to both internal staff and external contractors., • Identifies and implements innovative and cost-effective solutions in project design, functionality, and construction., • Provides recommendations and technical expertise to improve and maintain facilities infrastructure., • Bachelor's degree in Engineering, Construction Management, or a related field required; advanced degree and/or Professional Engineering (PE) license preferred., • 8–10+ years of progressive engineering experience, ideally within facilities, utilities, or capital project environments., • Demonstrates in-depth knowledge of GMP-regulated engineering environments and the delivery of complex capital projects within pharmaceutical manufacturing settings., • Applies strong focus on safety, quality, schedule, and budget adherence while ensuring compliance with good engineering practices, company policies, regulations, and codes., • Effectively manages projects using internal technicians and external contractors, maintaining safety and performance standards throughout all project phases., • Skilled in scoping projects based on client requirements, developing cost estimates, preparing Capital Appropriation Requests (CARs), and creating detailed project schedules., • Possesses a solid understanding of facilities and building maintenance operations, including utilities infrastructure and reliability programs., • Demonstrates working knowledge of regulatory, environmental, GMP/GLP, and OSHA requirements relevant to engineering and construction projects., • Understands the design, construction, and operation of laboratories, manufacturing facilities, office buildings, and utility plants. This role involves both office and field work within a manufacturing environment. This successful candidate in this role must be able to: • Lift up to 50 lbs unassisted and perform physical activities such as crouching, kneeling, crawling, climbing stairs and ladders, and walking on level surfaces., • Perform visual inspections of installations and equipment. This position involves work in a variety of environments, including office and laboratory settings as well as indoor and outdoor plant areas. The role may involve: • Working independently and collaboratively with others., • Exposure to noise, heights, and confined or cramped spaces. <5% Travel Required Target Bonus 16% Work Location: East Syracuse, NY New York Pay Range$91,000—$142,000 USD We are an Equal Employment Opportunity ("EEO") Employer. We believe that women, people of color, veterans and LGBTQ communities must participate in the work we do, so we strongly encourage applications from people with these identities or who are members of underrepresented communities! If this is the work that you want to do, in a culture of inclusion and excellence with the goal of making our world to be a healthier place, then please apply today!

Job DescriptionDescription: Job Summary: The Product Design Engineering position is a Mechanical Engineer that works to create sold order designs. They may also be tasked with other general work tasks not specifically covered under the Product Design Engineering job description. Requirements: Essential Functions of Position: · Provide technical support in the form of design calculations and adherence to project specifications, codes, and standards. · Create and revise CAD drawings, and 3D models for project approval and in-house fabrication. · Work with the project manager to maintain, document, and communicate project schedules. · Communicate daily with internal and external customers. · Create Bill of Materials · Collaborate with multi-disciplinary engineering teams and work with vendors and contractors. · Develop and maintain detailed documentation to track project development and design process. · Perform other duties as assigned. Minimum Qualifications: • CAD and Inventor experience, • Associates degree in relevant field with related work experience., • Knowledge of how mechanical systems and processes work., • Comfortable working in a fast-paced environment., • Exceptional organizational and time management skills, • Bachelors in mechanical engineering, • 3-5 years in a manufacturing environment completing Engineering design work, • 3-5 years working in Inventor or SolidWorks, • Previous Epicor (ERP) Experience Physical Requirements: • Required to sit, stand, and walk; for up to 8 hours per day., • Continuous use of the hand, arm, and fingers to operate a computer keyboard, telephone, and other office equipment., • Ability to lift up to 20 pounds occasionally., • Ability to communicate professionally, in written and oral communications. Job Title: Product Design Engineer Reports To: Product Design Engineering Manager Classification: Exempt Pay Range: Min $73,615- Max $126,500

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn, and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Diversity, equity, inclusion, and belonging are a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S is currently seeking a Senior Project Engineer to join our Fuel Facility team. Location at a C&S office is preferred; however, a remote location is negotiable. Full-Time is Preferred; however, Part-Time is negotiable. The Senior Project Engineer is expected to have good relationships with clients and professionals in the fueling systems industry and will be responsible for generating project opportunities and managing fueling systems projects. In this role, the Senior Project Engineer will work with our multi-disciplinary design team to deliver projects in the aviation, automotive, and related fueling systems markets. Position Responsibilities • Develop effort budgets and schedules for prospective project pursuits., • Develop working relationships with existing and prospective clients and professionals., • Generate project opportunities., • Develop and optimize processes for improved efficiency, sustainability, and cost-effectiveness. Apply advanced problem-solving techniques and tools to enhance process design and operations., • Ensure all engineering projects comply with applicable codes, standards, and regulations. Maintain an up-to-date knowledge base of industry standards and government regulations., • Implement and oversee quality assurance protocols to maintain the quality of engineering outputs. Conduct reviews and audits of project deliverables to ensure technical accuracy and integrity., • Champion safety protocols and risk management practices throughout project lifecycles. Analyze potential risks and develop mitigation strategies to prevent accidents and operational failures., • Develop P&IDs for, but not limited to: Aviation Fueling Systems, Automotive Fueling Systems, Heating Oil Systems, and Emergency Generator Systems., • Communicate effectively with all stakeholders, including management, clients, regulatory bodies, and project teams, ensuring clear and consistent communication regarding project progress and issues., • Mentor less experienced engineers and support their professional development., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Minimum bachelor’s degree in mechanical, environmental, or industrial engineering or other similar degree., • Minimum 10 years’ experience working on flammable and combustible liquids fueling systems projects., • Professional Engineer (PE) license preferred or willing to pursue PE license., • Understanding of flammable and combustible liquids engineering principles, methodologies, and tools., • Ability to analyze complex engineering problems and develop effective solutions., • Comprehensive knowledge of relevant industry standards, safety regulations, and environmental laws., • Ability to write sequence of operation processes with P&IDs., • Excellent verbal and written communication skills, capable of effectively articulating technical information to non-technical stakeholders and writing detailed reports., • Efficient in; Bluebeam (or other PDF reader), Microsoft Word, Microsoft Excel, and Microsoft Outlook. $120,000 - $140,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description Geotechnical Engineer – Nationwide Opportunities Earth Systems, LLC – part of EnviroTech Holdings (Earth Systems, EnviroTrac, EnviroTactics, Spangler Environmental, Bio-Tech Consulting, Earth Systems Response & Restoration) Looking for a career where your expertise actually makes an impact? At Earth Systems, we’re not your typical environmental consulting firm. With 30+ locations nationwide, our teams of scientists and engineers tackle geotechnical and environmental challenges head-on—combining technical know-how with practical solutions that matter. Position Overview We’re looking for a Geotechnical Engineer who knows the consulting world—someone who’s worked with firms providing Geology, Environmental Science, and Environmental Engineering services. If you thrive in a fast-moving, multidisciplinary environment, this role will give you the chance to lead from the field and solve real-world problems head-on. You’ll take charge of project leadership across multiple regions, using your technical expertise and practical mindset to deliver results that matter. The ideal candidate will hold a PE license and bring proven experience in the environmental consulting industry, with the confidence to step into a leadership role and the drive to make an impact. What You’ll Do * Lead geotechnical investigations and in-situ testing * Deliver foundation design, slope stability, and settlement analysis recommendations * Write and present clear, actionable reports for clients * Scope, budget, and manage projects with support from a collaborative team * Oversee fieldwork and lab testing to ensure QA/QC * Partner with clients, regulators, and project teams to keep work on track * Mentor junior staff and share your expertise What We’re Looking For * Bachelor’s degree in Geotechnical Engineering, Geology, Environmental Engineering, or related field (Master’s a plus) * 5+ years of experience in geotechnical or applied environmental consulting * PE license or EIT with the ability to obtain licensure in the state of hire within 12 months * Proficiency in AutoCAD, gINT, GeoStudio, or similar software * Strong writing skills and experience preparing technical reports * Willingness to travel to project sites within your region What We Offer * Competitive salary and full benefits (medical, dental, vision, life) * 401(k) with company match * PTO, holidays, and flexible scheduling * Phone reimbursement * Hybrid work (office/field/home mix) * Paid training, certifications, and continuing education * A growth-focused, collaborative culture where your voice matters At Earth Systems, you’ll have a seat at the table from day one—and the chance to shape meaningful projects that drive real change. Ready to take the next step? Apply now!

Job Description We are currently hiring in our Buildings Engineering Division at our White Plains, NY and Brooklyn, NY offices. LaBella is on the cutting edge of energy efficiency and renewable energy projects that help our clients reduce their energy usage and carbon footprints. Our Energy and Commissioning group is looking for an entry or junior level Construction Management Engineer with 2-5+ years of experience in field construction management. This individual will serve a key function in seeing our turnkey energy projects from design through construction and commissioning. The potential candidate will have the opportunity to work in a hands-on environment, with frequent site visits and contractor meetings at construction sites in the greater NYC area. This is an exciting opportunity to help LaBella’s energy group impact the future of our community and climate. Responsibilities • Manage daily construction activities and project schedule, budget, safety, and QA/QC;, • Provide full administrative support to the Energy Engineering group to ensure smooth completion of various construction efforts., • Assist with the organization, tracking, review, and disposition of various engineering and construction documents including Requests for Information (RFIs), submittals, shop drawings, and change orders;, • Coordinate with multidisciplinary designers, construction managers, contractors, and clients to communicate project status and set priorities;, • Attend construction progress meetings and site visits;, • Resolve on-site issues and manage risks to mitigate negative impacts to project and client;, • Manage and direct subcontractors;, • Support mechanical/electrical design professionals;, • Support in project bidding and contractor evaluation;, • Position requires work Monday through Friday with occasional evenings and weekends; and frequent travel to project site., • Bachelor of Science in Mechanical Engineering, Electrical Engineering, Construction Management or similar degree., • 2 to 5+ years of construction experience., • FE/EIT certification or CCM certification preferred;, • OSHA 30-Hour certification preferred;, • Excellent written and verbal communication skills;, • Strong attention to detail with excellent analytical, multitasking, and judgment capabilities;, • Demonstrated ability to follow direction and work in a collaborative team environment;, • Experience with computer aided drafting software, proficiency in AutoCAD and REVIT preferred;, • Experience with Construction Management software (Primavera, ProCore, etc), • Reliable transportation to access job sites, on occasion, with a valid driver’s license in good standing; and The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job DescriptionDescription: Ready to lead bridge projects that strengthen and connect communities? At Fisher Associates, you’ll take ownership of high-impact bridge design and rehabilitation projects while advancing your career as a Bridge Project Manager. We’re seeking a motivated engineering professional with experience in bridge design, DOT coordination, and project delivery who is ready to step into a visible leadership role. If you’re driven by technical excellence, collaboration, and long-term career growth, this is your opportunity to make a measurable impact. Fisher Associates is seeking a motivated Project Manager – Bridge Engineering to join our growing transportation team. This role is ideal for professionals with experience in bridge design, structural analysis, transportation infrastructure, project management, and quality control who are ready to lead projects from concept development through final design and construction support. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Transportation Bridge Project Manager • Lead the planning, design, and delivery of bridge transportation projects., • Manage project budgets, scope, schedule, and staffing to ensure successful and timely project delivery., • Lead design strategy in collaboration with teams and clients to ensure alignment and seamless delivery., • Ensure compliance with federal, state, and local regulations, permitting requirements, and quality standards., • Identify project risks and implement proactive mitigation strategies., • Serve as the primary point of contact for clients, agencies, and stakeholders, • Cultivate and strengthen client relationships to support successful project outcomes and repeat business., • Oversee project billing, client updates, QA/QC of deliverables, and project closeout., • Support proposal development, scope definition, and fee estimates for new and existing clients., • B.S. degree in Civil Engineering, Master’s preferred, • 7+ years progressive transportation bridge design engineering and project management experience, • Demonstrated experience managing bridge design transportation projects from design through delivery., • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in MS Office, MicroStation, STAAD and Bridge Design Software preferred, • Proven success in developing trusted, long-term client relationships, • Familiarity with NYSDOT design standards preferred, • Dedicated to fostering trusting relationships through collaboration, integrity and respect., • Deliver high-quality work using critical thinking, sound judgment, and exceptional organizational skills., • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment. Actual compensation will vary based on experience, qualifications, and other factors. The listed salary range does not guarantee specific pay or reflect total compensation and excludes the value of benefits. Why You’ll Love Working at Fisher • You are empowered to deliver exceptional results through collaborative design leadership., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths and project leadership opportunities., • You thrive in a culture that keeps work engaging and fosters a relaxed, collaborative atmosphere., • Your journey is supported by a team-driven environment promoting mentorship and continuous learning. Fisher offers competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law.