Offres project engineer à Camden, New JerseyCréer des alertes d'emploi

Job Description Position Overview: As a Mid-Level Electrical Engineer/Designer, you will play a key role in designing, developing, and implementing electrical systems for supermarket projects. You will work closely with architects, mechanical engineers, and clients to ensure our designs meet industry standards, energy efficiency goals, and project requirements. This role requires a high degree of independence, with the ability to take ownership of design tasks from concept to completion. Key Responsibilities: * Act with a high degree of independence while designing electrical systems including lighting, power distribution, and low-voltage control systems for supermarket and retail environments. * Prepare equipment and general area power plans, lighting plans, single-line diagrams, panel schedules, control plans & risers using AutoCAD software. * Collaborate with Architects, Consulting Engineers, and Project Managers to integrate systems seamlessly into the overall building design. * Conduct site visits and field inspections to identify and document existing conditions and ensure designs are properly implemented. * Review construction documents prepared by Architects and Consulting Engineers based on project design requirements and identify and document areas of non-conformance. Review vendor shop drawings for conformance with project requirements. * Communicate effectively with Consulting Engineers, Construction Managers/Building Trades, Equipment Suppliers, and Client Representatives to ensure smooth coordination and project implementation. * Assist in developing cost estimates, material selection, and value engineering efforts. * Troubleshoot and resolve electrical design challenges throughout the project lifecycle. * Work directly with senior staff to develop and continuously improve department design and execution standards. Qualifications & Experience: * Bachelor's degree in Electrical Engineering and 5 years of relevant experience or 10 years of relevant experience without degree, required. Experience is preferably in retail, commercial, or supermarket environments. * Intermediate to Advanced proficiency in AutoCad. Proficiency in AutoCAD MEP/Architecture and Revit is a plus. * Strong proficiency with Electrical Engineering principles, practices, process, design/build, and the application to permitting and project work-related issues and a strong knowledge of relevant codes and regulations. * Experience with lighting design, power distribution, and low-voltage systems. * Excellent communication and teamwork skills, with the ability to engage and coordinate effectively with various stakeholders. * Ability to manage multiple projects and meet deadlines. What We Offer: * Competitive salary and benefits package. * Opportunities for professional development and career growth. * A collaborative and innovative work environment. * Exposure to a variety of exciting supermarket design projects. Company DescriptionCold Technology is a leading supermarket design firm, representing several top retail brands known for their commitment to delivering an exceptional customer shopping experience. We are dedicated to designing innovative and customer-centric supermarkets that captivate and engage shoppers while incorporating energy-efficient and sustainable solutions.Cold Technology is a leading supermarket design firm, representing several top retail brands known for their commitment to delivering an exceptional customer shopping experience. We are dedicated to designing innovative and customer-centric supermarkets that captivate and engage shoppers while incorporating energy-efficient and sustainable solutions.

Description Leidos is seeking a Senior Transmission Line Engineer who will work as members of a dynamic team working in a fast-paced environment, solving challenging problems involved with electric transmission. The Senior Transmission Line Engineer will serve as key contributors on electric transmission line design projects for high-voltage overhead and underground systems for some of the largest utilities in the country. These employees will apply established NESC, ASCE, ACI, and other applicable standards in the engineering and design of electrical overhead and underground systems, voltage conversion projects, new capacity projects, and infrastructure replacement projects. Additionally, they will perform engineering analyses, prepare bidding documents, draft plans and specifications, and prepare material procurement and construction documents. Engineers at this level will focus on independent execution of technical tasks using tools like PLS-CADD and PLS-POLE and will contribute to the quality control process. This will involve working with a multi-person Leidos team and supporting clients, project planning, environmental, permitting, and construction management personnel. Work Locations: Ideal candidates will be located in Michigan, Ohio, West Virginia, Maryland, Pennsylvania, & New Jersey working a hybrid schedules. Fully REMOTE positions are available for qualified candidates. Relocation assistance will be provided to those able to relocate within a commutable distance to Walled Lake, MI or Cranberry Township, PA. The Challenge: • Execute technical design and engineering tasks related to high-voltage transmission lines, ensuring compliance with all applicable codes and standards., • Prepare and review technical drawings, specifications, and calculations under the guidance of Lead Engineers or Project Managers., • Perform engineering analyses, including PLS-CADD modeling and structure loading calculations., • Contribute to the team's continuous improvement goals by learning and applying new technical tools, AI, and automation platforms., • Actively communicate and coordinate project progress with the Project Manager (PM) to ensure awareness of and adherence to project schedule and budget. (This directly incorporates your PM/Schedule change.), • Maintain strong technical proficiency in industry-standard software and Leidos design processes. Required Education & Experience: • Bachelor’s in Civil, preferred, or Mechanical Engineering with four plus (4 +) years of relevant experience in the design of electric utility transmission systems., • Experience using PLS-CADD and PLS-POLE., • Work effectively in team environment; can also work independently., • Strong interpersonal and written communication abilities, with a focus on effective collaboration across client and project teams., • Work in client office is a possibility and/or periodic travel may be required. Desired Experience: • Experience with TOWER is a plus, • EIT or PE certification is desirable, • Experience with LPILE or FAD, Mathcad, AutoCAD or MicroStation, and Geographic Information Systems (GIS) is a plus Why Leidos: At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities, and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world’s toughest problems, and reward you with a welcoming culture that recognizes the importance of a strong work/life balance, as well as competitive compensation and benefits. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference. We value and support the well-being and mobility of our employees with competitive benefit packages, complementary e-learning training, work-life flexibility, an exciting External Referral Program, and a diverse, inclusive, and ethical workplace. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. If this sounds like the kind of environment where you can thrive, keep reading! Are you ready to make an impact? Begin your journey of a flourishing and meaningful career; share your resume with us today! PDSTLINE PowerDelivery If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. February 27, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $73,450.00 - $132,775.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #Remote #Featuredjob

Description We are seeking a Lead Transmission Line Engineer who will manage a collaborative and dynamic team working in a fast-paced environment, solving challenging problems involved with electric transmission. The successful candidate will serve as a Lead Engineer and Technical Project Manager on high voltage electric transmission line design projects of overhead and underground systems for some of the largest utilities in the country as well as regional utilities. The candidate will apply NESC, ASCE, ACI, NEC, and other applicable standards in the engineering and design of all types of capital and maintenance projects from 34.5 kV to 765 kV. Additionally, the candidate will direct a team of engineers that regularly perform engineering analyses, PLS-CADD modeling, structure loading calculations, foundation design using MFAD and/or LPILE, design structure framing and hardware assemblies, draft plans and specifications, and prepare bill of materials and procurement documents across project planning, engineering, environmental, permitting, and construction management phases. The successful candidate can expect a fast-paced, diverse work environment and flexible work hours/work arrangements as well as a manager and peers who will encourage career development and growth! In addition, the successful candidate will be involved in applying AI, automation, and digital design platforms to streamline grid modernization and increase design efficiency. This is a senior leadership role with primary responsibilities in client relations, staff management, proposal development, scope creation/change, project execution, and new business capture for the team’s full book of work. The successful candidate will be able to communicate clear expectations, goals, and vision; manage the performance of direct reports; motivate, coach, and mentor skilled professionals; and appropriately delegate project work. The candidate must be capable of managing collaboration and a positive team culture to achieve successful results. Location: This position is a hybrid work position with the potential for remote work for the right candidate located in Pennsylvania, Ohio, or West Virginia. Relocation assistance may be available for qualified candidates. The Challenge: • Direct multiple design teams simultaneously executing various projects and programs for multiple clients., • Develop a team of engineers by training, coaching, and nurturing Leidos’ engineering talent., • Supervise staff by approving timesheets and running the annual performance review process., • Participate proactively as a member of the leadership team of the Transmission Line Section., • Create responses to RFPs, RFIs, and RFQs from clients for new work, including proposal creation and definition of scope of work., • Possess a growth mindset to foster creative problem solving for our clients’ most complex issues., • Promote continuous improvement to develop streamlined processes and tools that facilitate improvements to departmental technical resources via innovation and automation., • Delegate tasks to staff, forecast and plan their future workload, and run recruiting activities to support aggressive growth goals., • Drive the quality control process for the execution team to ensure the highest level of quality in all deliverables., • Liaise with clients to maximize affinity, facilitate business development growth, and foster long-term relationship building., • Manage portfolio health by leveraging Project Managers to independently drive and monitor scope, schedule, and budget. Accountability for schedule compliance requires high awareness and support from assigned Lead Engineers. What Sets You Apart (Required): • Bachelor’s degree in Civil, preferred, or Mechanical Engineering with eight plus (8+) years of relevant experience in the design of high voltage electric utility transmission systems., • Expertise in PLS-CADD and PLS-POLE., • Engineer In Training (EIT) certification., • Work effectively in a team environment; can also work independently., • Track record of outstanding communication to serve as primary point of contact for existing and perspective clients., • Business acumen with a record of understanding and meeting key project performance metrics., • Working onsite in a Leidos or client office is a possibility; some periodic travel may be required., • Ability and passion to develop staff through mentoring. Favorable If You Have: • Two plus (2+) years of supervising staff., • M.S. degree in Structural Engineering., • Experience with TOWER., • P.E. certification or the ability to achieve P.E Certification in 6 months., • Experience with LPILE or FAD, Mathcad, AutoCAD or MicroStation, and Geographic Information Systems (GIS) is a plus. Why Leidos: At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities, and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world’s toughest problems, and reward you with a welcoming culture that recognizes the importance of a strong work/life balance, as well as competitive compensation and benefits. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference. We value and support the well-being and mobility of our employees with competitive benefit packages, complementary e-learning training, work-life flexibility, an exciting External Referral Program, and a diverse, inclusive, and ethical workplace. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. If this sounds like the kind of environment where you can thrive, keep reading! Are you ready to make an impact? Begin your journey of a flourishing and meaningful career; share your resume with us today! PowerDelivery PDSTLINE If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. April 30, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $92,300.00 - $166,850.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Description Leidos is seeking a Transmission Line Engineer who will work as members of a dynamic team working in a fast-paced environment, solving challenging problems involved with electric transmission. The Transmission Line Engineer will serve as key contributors on electric transmission line design projects for high-voltage overhead and underground systems for some of the largest utilities in the country. These employees will apply established NESC, ASCE, ACI, and other applicable standards in the engineering and design of electrical overhead and underground systems, voltage conversion projects, new capacity projects, and infrastructure replacement projects. Additionally, they will perform engineering analyses, prepare bidding documents, draft plans and specifications, and prepare material procurement and construction documents. Engineers at this level will focus on independent execution of technical tasks using tools like PLS-CADD and PLS-POLE and will contribute to the quality control process. This will involve working with a multi-person Leidos team and supporting clients, project planning, environmental, permitting, and construction management personnel. Work Locations: Ideal candidates will be located in Michigan, Ohio, West Virginia, Maryland, Pennsylvania, & New Jersey working a hybrid schedules. Fully REMOTE positions are available for qualified candidates. Relocation assistance will be provided to those able to relocate within a commutable distance to Walled Lake, MI or Cranberry Township, PA. The Challenge: • Execute technical design and engineering tasks related to high-voltage transmission lines, ensuring compliance with all applicable codes and standards., • Prepare and review technical drawings, specifications, and calculations under the guidance of Lead Engineers or Project Managers., • Perform engineering analyses, including PLS-CADD modeling and structure loading calculations., • Contribute to the team's continuous improvement goals by learning and applying new technical tools, AI, and automation platforms., • Actively communicate and coordinate project progress with the Project Manager (PM) to ensure awareness of and adherence to project schedule and budget. (This directly incorporates your PM/Schedule change.), • Maintain strong technical proficiency in industry-standard software and Leidos design processes. Required Education & Experience: • Bachelor’s in Civil, preferred, or Mechanical Engineering with two plus (2 +) years of relevant experience in the design of electric utility transmission systems., • Experience using PLS-CADD and PLS-POLE., • Work effectively in team environment; can also work independently., • Strong interpersonal and written communication abilities, with a focus on effective collaboration across client and project teams., • Work in client office is a possibility and/or periodic travel may be required. Desired Experience: • Experience with TOWER is a plus, • EIT or PE certification is desirable, • Experience with LPILE or FAD, Mathcad, AutoCAD or MicroStation, and Geographic Information Systems (GIS) is a plus Why Leidos: At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities, and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world’s toughest problems, and reward you with a welcoming culture that recognizes the importance of a strong work/life balance, as well as competitive compensation and benefits. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference. We value and support the well-being and mobility of our employees with competitive benefit packages, complementary e-learning training, work-life flexibility, an exciting External Referral Program, and a diverse, inclusive, and ethical workplace. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. If this sounds like the kind of environment where you can thrive, keep reading! Are you ready to make an impact? Begin your journey of a flourishing and meaningful career; share your resume with us today! PDSTLINE PowerDelivery If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. February 27, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $59,150.00 - $106,925.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #Remote

Description At Leidos, the opportunities are boundless. We challenge our staff with interesting assignments that provide them with an opportunity to thrive, professionally and personally. For us, helping you grow your career is good business. Leidos is seeking Distribution Engineers & Designers in New Jersey who are passionate about electric utility design engineering. We’re looking for someone who is dedicated to ensuring that every project, no matter how simple or complex, is of exceptional quality. You'll be working directly with clients to make sure that Leidos' reputation for high-quality work is always maintained. If you join us in this role, you'll gain expertise in a variety of areas, including NESC, Structural Pole Modeling, Electrical Power Calculations, GIS design training, Field Data Collection, and Client Design Standards. Your greatest work is ahead! Travel: This position has remote-working capabilities, but candidates must be located within a commutable distance of our New Jersey support areas in order to be considered, so we can provide support to our local utility customer as needed. The selected candidate(s) will be expected to be available for in-person meetings and assignments throughout the customer territory in New Jersey on an as-needed basis. As a Distribution Engineer / Designer, you can expect to: • Independently develop design and construction work packages for electrical overhead and underground distribution systems for Leidos electric utility customers, • Review work provided by Client and assess requirements of scopes., • Perform engineering calculations such as: structural analysis for wood pole loading, guying calculations, specifying conductor sags and tensions for recommended spans, and calculation of voltage drop and flicker., • Provide engineering support during construction, including post-construction reviews to ensure all applicable engineering and construction standards have been met., • Conduct root cause analysis of outages and mitigation using engineering principles and design, • Gain experience in coordinating conflicting utilities and other field engineering design requirements, assessing and developing large design packages for complex cable/conduit projects in dense urban environments, work permit development, easements, and ROW applications What Sets You Apart (Background Requirements): • 2+ years of prior relevant experience is required., • Bachelor's Degree (Electrical, Mechanical, Civil, or Industrial preferred); additional relevant experience/certifications may be considered in lieu of bachelor's degree, • Experience with the execution of distribution projects from kickoff through design approved, including Customer interaction and Process documentation, • Experience with utility reliability projects, • Ability to demonstrate proficiency with the NESC, • Ability to utilize a personal vehicle, as some customer-related travel could be anticipated (Job-related travel will be reimbursed at IRS-approved rates), • Willingness to perform both field and office work; Ability to work in outdoor environments on occasion; The role may require customer-site visits to collect field data that will assist in developing work packages, • Candidates should possess valid U.S. driver's license, as some local or regional travel is expected Nice to Haves: • Previous QAQC experience, • Experience providing estimated costs, development of a BOM, calculating the CIAC, • Experience with design tools such as Pole Foreman, O-Calc, Spida-Calc, • Experience with the Work Management System CREWS, • Relevant management or leadership experience Professional Attributes that will help you succeed in this role: • Strong communication skills, written and interpersonal communications skills and supporting of customer advocacy, • Collaborative and inclusive of individuals of diverse backgrounds and geographic locations, • Positive attitude, • Ability to work with limited supervision, • Professional dress and demeanor, • Attention to detail & Highly organized, • Excellent time management At Leidos, we pride ourselves on being a trusted and technology-focused solutions provider. Our Power Delivery Services Team is the go-to for utilities and mobile operators who need reliable power and telecommunication expertise. We've worked with over 50 investor-owned utilities, over 160 municipals/cooperatives, and we're continuing to expand our reach. Plus, we've got an amazing group of industry-leading construction partners who help us deliver meaningful Energy Delivery Solutions. Our recognition as an industry leader has been confirmed time and time again. Engineering News-Record (ENR) has ranked Leidos among the Top 10 T&D Firms and Top 10 Power Firms. As a valued team member, you can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements, as well as managers who will encourage career development and growth opportunities, including Professional Engineer License (PE), Project Management Professional (PMP), Leadership training, Formal Mentorship Programs, Management opportunities. PDSDLINE PowerDelivery If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. March 27, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $59,150.00 - $106,925.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #Remote

Description At Leidos, the opportunities are boundless. We challenge our staff with interesting assignments that provide them with an opportunity to thrive, professionally and personally. For us, helping you grow your career is good business. Leidos is seeking a Senior Distribution Engineer in the Allentown, PA area who is passionate about electric utility design engineering. We’re looking for someone who is dedicated to ensuring that every project, no matter how simple or complex, is of exceptional quality. You'll be working directly with clients to make sure that Leidos' reputation for high-quality work is always maintained. If you join us in this role, you'll gain expertise in a variety of areas, including NESC, Structural Pole Modeling, Electrical Power Calculations, GIS design training, Field Data Collection, and Client Design Standards. Your greatest work is ahead! Travel: This position has remote-working capabilities, but candidates must be located within a commutable distance of Allentown, PA in order to be considered, so we can provide support to our local utility customer as needed. The selected candidate(s) will be expected to be available for in-person meetings and assignments throughout the customer territory in Pennsylvania on an as-needed basis As a Distribution Engineer, you can expect to: * Perform design engineering for Leidos electric utility customers * Develop work packages for OH, UG, URD, and Make Ready, using customer GIS and WMS systems such as EFD, AUD, Smallworld, ArcGIS, Infor, EAM, STORMS, and Maximo * Manage scope, schedule, and budget of work assigned. * Perform functional tasks, planning, and/or customer follow-up * Perform scope analysis of work assigned and maintain schedule adherence to advocate client priorities * Initiate continuous improvement to workflow processes that drive efficiency and high-quality standards in client design deliverables * Gain experience in coordinating conflicting utilities and other field engineering design requirements, assessing and developing large design packages for complex cable/conduit projects in dense urban environments, work permit development, easements, and ROW applications * Be comfortable in both a field and office setting: the role may require local or regional customer-site visits to collect field data that will assist in developing work packages What Sets You Apart (Background Requirements): * 4+ years of prior relevant experience is required. Relevant experience is either working directly with an electric utility or an electric utility consulting company performing design engineering for electric distribution. * Bachelor of Science in Engineering discipline (Electrical, Mechanical, Civil, or Industrial) from an ABET accredited institution; additional relevant experience/certifications may be considered in lieu of bachelor's degree * Active Professional Engineer (PE) license required; must hold or be able to obtain licensure in the Commonwealth of Pennsylvania. * Experience and demonstrated proficiency with the National Electric Safety Code (NESC) * Some Prior experience with structural analysis, guying calcs, cable pulling calcs, coordination of protective devices, and electric demand and fault currents calculations. * Ability to provide your own reliable transportation, as some local or regional customer-related travel is anticipated (Job-related travel will be reimbursed at IRS-approved rates). * Ability to demonstrate strong written, verbal and interpersonal communications skills You Might Also Have Some previous experience with: * Providing estimated costs, development of a BOM, calculating the CIAC. * Design tools such as Pole Foreman, Pull Planner, and Katapult. * Work management software and job estimating software. * CAD or MicroStation – Performing Electrical Distribution Design * Experience in providing Quality Assurance (QA) and Quality Control (QC) for Design Projects * High level organization and project management skills * Ability to uptrain entry level resources and create process documents Professional Attributes that will help you succeed in this role: * Collaborative attitude and inclusivity of individuals of diverse backgrounds and geographic locations. * Ability to work with limited supervision * Positive attitude * Professional dress and demeanor At Leidos, we pride ourselves on being a trusted and technology-focused solutions provider. Our Power Delivery Services Team is the go-to for utilities and mobile operators who need reliable power and telecommunication expertise. We've worked with over 50 investor-owned utilities, over 160 municipals/cooperatives, and we're continuing to expand our reach. Plus, we've got an amazing group of industry-leading construction partners who help us deliver meaningful Energy Delivery Solutions. Our recognition as an industry leader has been confirmed time and time again. Engineering News-Record (ENR) has ranked Leidos among the Top 10 T&D Firms and Top 10 Power Firms. As a valued team member, you can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements, as well as managers who will encourage career development and growth opportunities, including Professional Engineer License (PE), Project Management Professional (PMP), Leadership training, Formal Mentorship Programs, Management opportunities. PDSDLINE PowerDelivery If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. April 16, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $73,450.00 - $132,775.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #Remote

Description At Leidos, the opportunities are boundless. We challenge our staff with interesting assignments that provide them with an opportunity to thrive, professionally and personally. For us, helping you grow your career is good business. Leidos is seeking Distribution Engineers in the Allentown, PA area who are passionate about electric utility design engineering. We’re looking for someone who is dedicated to ensuring that every project, no matter how simple or complex, is of exceptional quality. You'll be working directly with clients to make sure that Leidos' reputation for high-quality work is always maintained. If you join us in this role, you'll gain expertise in a variety of areas, including NESC, Structural Pole Modeling, Electrical Power Calculations, GIS design training, Field Data Collection, and Client Design Standards. Your greatest work is ahead! Travel: This position has remote-working capabilities, but candidates must be located within a commutable distance of Allentown, PA in order to be considered, so we can provide support to our local utility customer as needed. The selected candidate(s) will be expected to be available for in-person meetings and assignments throughout the customer territory in Pennsylvania on an as-needed basis. As a Distribution Engineer, you can expect to: * Perform design engineering for Leidos electric utility customers * Develop work packages for OH, UG, URD, and Make Ready, using customer GIS and WMS systems such as EFD, AUD, Smallworld, ArcGIS, Infor, EAM, STORMS, and Maximo * Manage scope, schedule, and budget of work assigned. * Perform functional tasks, planning, and/or customer follow-up * Perform scope analysis of work assigned and maintain schedule adherence to advocate client priorities * Initiate continuous improvement to workflow processes that drive efficiency and high-quality standards in client design deliverables * Gain experience in coordinating conflicting utilities and other field engineering design requirements, assessing and developing large design packages for complex cable/conduit projects in dense urban environments, work permit development, easements, and ROW applications * Be comfortable in both a field and office setting: the role may require local or regional customer-site visits to collect field data that will assist in developing work packages What Sets You Apart (Background Requirements): * 2+ years of prior relevant experience is required. * Bachelor of Science in Engineering discipline (Electrical, Mechanical, Civil, or Industrial) from an ABET accredited institution; additional relevant experience/certifications may be considered in lieu of bachelor's degree * Experience and demonstrated proficiency with the National Electric Safety Code (NESC) * Some Prior experience with structural analysis, guying calcs, cable pulling calcs, coordination of protective devices, and electric demand and fault currents calculations. * Ability to provide your own reliable transportation, as some local or regional customer-related travel is anticipated (Job-related travel will be reimbursed at IRS-approved rates). * Ability to demonstrate strong written, verbal and interpersonal communications skills You Might Also Have Some previous experience with: * Providing estimated costs, development of a BOM, calculating the CIAC. * Design tools such as Pole Foreman, Pull Planner, and Katapult. * Work management software and job estimating software. * CAD or MicroStation - performing Electrical Distribution design. Professional Attributes that will help you succeed in this role: * Collaborative attitude and inclusivity of individuals of diverse backgrounds and geographic locations. * Ability to work with limited supervision * Positive attitude * Professional dress and demeanor At Leidos, we pride ourselves on being a trusted and technology-focused solutions provider. Our Power Delivery Services Team is the go-to for utilities and mobile operators who need reliable power and telecommunication expertise. We've worked with over 50 investor-owned utilities, over 160 municipals/cooperatives, and we're continuing to expand our reach. Plus, we've got an amazing group of industry-leading construction partners who help us deliver meaningful Energy Delivery Solutions. Our recognition as an industry leader has been confirmed time and time again. Engineering News-Record (ENR) has ranked Leidos among the Top 10 T&D Firms and Top 10 Power Firms. As a valued team member, you can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements, as well as managers who will encourage career development and growth opportunities, including Professional Engineer License (PE), Project Management Professional (PMP), Leadership training, Formal Mentorship Programs, Management opportunities. PDSDLINE PowerDelivery If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. April 16, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $59,150.00 - $106,925.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #Remote

Summary: This role involves leading and managing the Mechanical, Electrical, and Plumbing (MEP) engineering department while ensuring the successful delivery of projects across municipal and private sectors. The position focuses on overseeing MEP system design, project execution, quality control, and resource management to ensure projects are completed on time, within budget, and in compliance with industry standards. The individual will also play a key role in business development by pursuing new opportunities and strengthening client relationships in the Delaware Valley region. Additionally, the role requires mentoring team members, driving innovation, and maintaining high technical and operational standards within the department. Job Requirements: • Lead and manage MEP department operations, including project oversight, resource allocation, and quality control processes., • Develop and maintain client relationships while actively pursuing new projects and business opportunities., • Bachelor’s degree in Mechanical or Electrical Engineering or a related field., • Minimum 10 years of experience in MEP design and engineering with at least 5 years in a leadership role., • Professional Engineer (PE) license required with strong project management and leadership skills.

Are you a highly skilled Project Engineer looking for a unique opportunity to make a significant impact while aligning with a company that values communication, accountability, pride, support, and trustworthiness? Do you have a passion for tax consulting and believe in a personalized approach to your work? If you're ready to take on the role of a Cost Segregation Project Engineer read on to discover how you can contribute to our mission and become a key part of our team. WHO WE ARE: At CAPSTAN our dedicated team works collaboratively to deliver expert tax consulting services that are characterized by clear, purposeful, and warm communication. We take pride in our meticulous approach to every aspect of our work, and we foster a culture of mutual respect and trustworthiness both internally and with our clients. With our core values as our guiding principles, we aim to be the go-to consultants for our clients, ensuring their satisfaction and financial success. We believe in the Character of Capstan to be: • COMMUNICATION: Striving to communicate – internally and externally – in a manner that is clear, purposeful, and warm., • ACCOUNTABILITY: Striving to be a person on whom others can rely, fulfilling all commitments to clients and colleagues., • PRIDE: Striving to do all things with meticulous accuracy, taking pride in my work as it is a reflection of myself., • SUPPORT: Striving to encourage my teammates in all their endeavors, and to contribute to an atmosphere of mutual respect., • TRUSTWORTHINESS: Striving to act with integrity and to be worthy of trust. Requirements WHAT YOU WILL DO AS THE Cost Segregation Project Engineer: • Construct: Create detailed cost segregation reports, including preliminary research, reviewing files, and confirming engagement agreements., • Site Visit: Conduct comprehensive site visits, documenting assets and common areas., • Spreadsheet and Word Document Creation: Input building assets into spreadsheets, write property descriptions, and generate comprehensive reports., • Review Process: Collaborate with management staff to ensure the accuracy of reports and communicate effectively with clients., • Attend Meetings: Participate in regular staff meetings, technical sessions, and training opportunities., • Communication: Maintain clear and proactive communication with sales teams and clients, addressing any issues promptly., • Problem Solving: Tackle unique project challenges and ensure a high level of accuracy and detail in your work., • Data Gathering: Collect data about client properties, perform on-site reviews, and execute multi-step assessment processes. YOU ARE THE IDEAL CANDIDATE IF YOU ARE: • Independent Worker – You have the ability to work effectively and efficiently without constant supervision, managing tasks with precision., • Effective Communicator – You excel in written and verbal communication, ensuring clear, purposeful, and warm interactions with clients and colleagues., • Detail-Oriented – You maintain meticulous accuracy in your work, as it is a reflection of your commitment to excellence., • Problem Solver – You embrace challenges and find solutions even when faced with unique project facts., • Tech-Savvy – You possess proficiency in Microsoft Office and can confidently navigate digital tools and resources., • Adaptable – You can handle multiple tasks simultaneously while maintaining careful attention to detail and accuracy., • Team Player – You contribute positively to team dynamics, encourage your teammates in their endeavors, and foster mutual respect., • Trustworthy – You act with integrity and consistently uphold your commitments, making you worthy of the trust placed in you., • Critical Thinker – You can expertly read and understand architectural and engineering construction plans and specifications, a crucial aspect of this role., • Client-Focused – You provide timely, high-quality client service that meets or exceeds client expectations, ensuring their satisfaction., • Resourceful – You can use industry-standard cost estimation sources to ascertain the cost of various building and site components., • Analytical – You can segregate building utility system components into different classifications based on their utilization within the facility., • Educated – We prefer candidates who have completed a minimum of a four-year engineering or technical degree. This demonstrates your commitment to professional growth and development. YOU POSSESS THESE BASIC REQUIREMENTS: • A minimum of a four-year engineering or technical degree., • Proficiency in Microsoft Office, including Word and Excel., • Strong written and verbal communication skills., • The ability to read and understand architectural and engineering construction plans and specifications., • Willingness and ability to work independently and prioritize tasks effectively. Benefits WHY YOU WILL LOVE WORKING WITH US: • Competitive Compensation: We offer a competitive salary package with performance-based incentives to reward your hard work., • Full-time Remote Opportunity: Enjoy the flexibility of working remotely while being part of a dynamic team., • Comprehensive Benefits Package: Medical, Vision, Dental, HRA, and retirement plan., • Career Growth Opportunities: We believe in investing in our team members' development and providing opportunities for career advancement and skill enhancement., • Supportive Team Environment: Join a team that values collaboration, mutual respect, and camaraderie, making work enjoyable and fulfilling. If you are a dedicated professional who is passionate about delivering exceptional results in the field of cost segregation, and you resonate with our mission, values, and the unique work environment we offer, we invite you to apply today and become a valued member of our team. Join us in making a real impact in the world of tax consulting and be part of a team that values your contributions and offers a rewarding and fulfilling career.

Hanley Energy is a globally recognized innovator in mission critical power and energy efficient technologies with United States headquarters based in Ashburn, Virginia with regional offices in Boardman, Oregon. We also have a global presence in Ireland, Australia, Germany, South Africa, and the Nordics. We specialize in the design, source, supply, install and commissioning of critical power and energy management solutions - from the power grid all the way to the factory process equipment and Data Center IT rack - coupled with comprehensive service and maintenance, security, consulting, and training. Our approach is to develop partnerships with clients, ensuring excellent delivery coupled with cost-effective technological solutions. In this way, we help our clients to reduce energy costs, ensure 100% up-time and optimize their operational competitiveness. We are looking for a Field Service Technician to join our team in Ashburn, Virginia. A Field Service Technician is responsible for performance of preventative maintenance, maintaining, and repairing Critical Power Systems at customer sites, for Hanley equipment. This role involves performing preventative maintenance, rapid restoration of failed equipment, and effective communication with site teams, as well as providing emergency support during call outs and late shifts. The engineer must possess skills and/or familiarity in power electronics, electrical equipment maintenance, and troubleshooting. Strong organizational and interpersonal skills, along with the ability to effectively manage time, are essential. Prior experience in industrial or switchgear manufacturing, and a proactive team-oriented approach are also key requirements for success in this role. Role Requirements and Responsibilities: • Ability willingness to travel on a regular basis across IAD area., • Service, maintenance, and repair of existing and newly installed Critical Power Systems - including ATS, PLCs, and shunt devices at all customer sites., • Responsible for coordination and communication with the site team to complete the project tasks., • Testing to ensure they are working correctly., • Ability to read electrical schematics and diagrams., • Perform maintenance and provide customer support., • Diagnose problems and be involved in solution to resolve any issues., • Maintain excellent communication with all departments., • Responsible for completing all computerized documentation., • Some scheduled weekend emergency call out service and late shift work involved., • Join 24/7 rota system providing emergency cover for customers. Job Qualifications Skills/Requirements: • Critical Power Field Service Engineer role requires a familiarity of power systems., • Experience working in either industrial or switchgear manufacturing industries., • Experience with electrical equipment maintenance and troubleshooting, • Experience/understanding of DC systems., • Full clean driving license, • Flexibility and high mobility required., • Have a positive, pro-active approach to working in a team environment along with excellent organizational and interpersonal skills. Ability to effectively manage time Company Benefits: • Medical, Dental and Vision with Company Contributions, • 401(k) Plan with Company Match, • Company Paid Life Insurance, Short Term and Long-Term Disability, • Paid Holidays, • Paid Time Off (PTO), • This position is bonus eligible., • Employee Assistance Program, • Hanely Energy is a V-3 Certified Employer, • EEO is our Policy and the Law! Applicants can learn more about the company’s status as an equal opportunity employer by viewing the federal and state posters ___. Please apply on our website

Seeking a Construction Manager (CM) to support the Department of Veterans Affairs’ Electronic Health Record Modernization (EHRM) infrastructure upgrade program at the Philadelphia VAMC. This is a full-time, onsite role providing professional construction management, quality assurance, and technical oversight for major healthcare facility renovation and infrastructure projects. Responsibilities • Perform daily field inspections of construction activities, documenting work performed, deficiencies, safety compliance, and progress toward schedule milestones., • Support the VA Resident Engineer (RE) and COR with construction administration, including change order documentation, submittal reviews, RFIs, and cost evaluation., • Monitor project financial data, including budget tracking, pay application verification, and forecasting., • Review project schedules, track progress, identify slippages, and recommend corrective actions., • Conduct and document weekly and bi-weekly progress meetings with contractors and stakeholders., • Support quality assurance efforts, ensuring adherence to specifications, VA design standards, and construction contract requirements., • Assist with testing and inspection coordination, commissioning activities, and verification of work completion., • Maintain accurate project records, daily logs, issue tracking, and close-out documentation in VA systems (e.g., TRIRIGA, PlanGrid or equivalent)., • Prepare weekly and monthly reports, inspection summaries, and project tracking updates for the COR and RE., • Participate in design reviews, value engineering discussions, feasibility assessments, and constructability evaluations., • Ensure contractor compliance with OSHA, Joint Commission, and VA safety requirements. Requirements • Minimum 3 years of field construction experience performing construction management, inspection, or construction administration duties., • Mechanical/Electrical experience preferred., • Experience with healthcare, federal, or complex facilities construction strongly preferred., • Ability to review and interpret drawings, specifications, submittals, schedules, and cost data., • Proficiency with construction management tools/software (e.g., scheduling software like P6, TRIRIGA, PlanGrid/Bluebeam, SharePoint)., • Strong written and verbal communication skills; ability to prepare clear daily reports and technical documentation., • Knowledge of building codes, construction methods, and quality assurance principles., • Must be a U.S. Citizen and able to obtain a VA PIV badge and pass a NACI background check., • OSHA 30 required within 60 days of hire (company-paid).

TSR is seeking a Structural Designer to support structural engineering execution on complex EPC projects. This role is responsible for producing high‑quality structural design deliverables in coordination with structural engineers and multidisciplinary project teams. This is an on-site position based in Newark, DE. The Structural Designer supports engineering execution from early design through construction by developing detailed structural drawings and models for steel and concrete structures that are safe, constructible, and compliant with project requirements. Key Responsibilities Structural Design & Drafting • Develop structural drawings and models for steel and concrete structures, including buildings, pipe racks, platforms, equipment supports, and foundations., • Prepare general arrangement drawings, details, sections, and bills of materials in accordance with project standards and engineering direction., • Incorporate structural calculations, design criteria, and engineer markups into accurate and consistent design deliverables., • Coordinate closely with structural engineers to support timely delivery of structural design packages., • Interface with civil/site, piping, mechanical, and electrical design teams to resolve clashes and design interfaces., • Participate in model and drawing reviews, addressing comments and incorporating revisions., • Ensure structural design deliverables comply with KBR drafting standards, project requirements, and applicable codes., • Perform self‑checks and participate in interdisciplinary checks to support quality design execution., • Apply lessons learned and contribute to continuous improvement of structural design workflows and standards. Required Qualifications • Associate degree or technical diploma in Drafting, Engineering Technology, or a related field (or equivalent experience)., • Minimum of 5 years of experience as a structural designer, preferably in an EPC or industrial project environment., • Experience developing structural design deliverables for steel and concrete structures., • Strong attention to detail and ability to follow engineering direction and design standards., • Effective communication skills and ability to work in a team‑based, multidisciplinary environment. Preferred Qualifications • Experience supporting large industrial, energy, or process facilities., • Experience working through construction and providing field support on EPC projects. Software Requirements Required • Proficiency with AutoCAD for structural drafting and detailing., • Experience with MicroStation for structural drafting and detailing., • Experience with e3D modeling tools., • Ability to work within multidisciplinary model environments and coordinate with other disciplines.

Job Title: MEP Engineering Department Head Job Location: Delaware Valley Region (New Jersey / Pennsylvania) Job Type: Full-time / Direct Hire Pay Range: $147,000 – $242,550 / year + Benefits Supervisory Responsibility: Yes – Department Leadership Travel: Regional travel as needed Work Environment: Office and Field-Based Job Description : Position Summary We are seeking an experienced MEP Department Head to lead and manage a multidisciplinary engineering team responsible for the design, delivery, and quality of Mechanical, Electrical, and Plumbing (MEP) systems across municipal and private sector projects. This leadership role is responsible for overseeing departmental operations, driving technical excellence, managing resources, and supporting business development initiatives within the regional market. The ideal candidate will be a strategic leader with strong technical expertise, proven project management capabilities, and demonstrated success in developing client relationships and securing new work. Key Responsibilities • Department Leadership, • Provide strategic direction and operational leadership for the MEP department, • Foster a collaborative, performance-driven team environment, • Mentor and develop engineering staff to support professional growth and succession planning Project Oversight • Oversee MEP projects from planning through completion, • Ensure projects are delivered on time, within budget, and in compliance with quality standards, • Monitor project performance, staffing levels, and workload distribution, • Technical Leadership, • Serve as the primary technical authority for MEP systems and engineering standards, • Provide guidance on system design, constructability, and regulatory compliance, • Ensure implementation of quality assurance and quality control (QA/QC) processes, • Business Development & Client Engagement, • Build and maintain relationships with municipal and private sector clients, • Support proposal development, project pursuits, and contract negotiations, • Identify and secure new project opportunities within the regional market, • Collaborate with leadership to support growth strategies and market expansion, • Operations & Resource Management, • Manage departmental budgets, staffing plans, and project schedules, • Coordinate work across multiple offices and technical teams, • Track performance metrics and provide regular operational reporting, • Continuous Improvement, • Stay current with industry trends, codes, and emerging technologies, • Implement process improvements to enhance efficiency and service delivery, • Promote innovation and best practices across engineering operations Required Qualifications • Professional Engineer (PE) license required (from any U.S. state), • Bachelor’s degree in Mechanical Engineering, Electrical Engineering, or related field, • 10+ years of experience in MEP engineering, design, or project management, • 5+ years of leadership or management experience supervising engineering teams, • Proven experience managing complex engineering projects, • Demonstrated experience developing client relationships and securing new business, • Strong knowledge of building codes, engineering standards, and regulatory requirements, • Excellent communication, leadership, and organizational skills Preferred Qualifications • Experience leading multidisciplinary engineering teams, • Experience working with municipal or infrastructure-related projects, • Experience managing regional or multi-office engineering operations, • Familiarity with project management and financial reporting systems, • Experience supporting proposal development and business growth initiatives, • Experience managing remote or matrixed teams Key Skills • Department and team leadership, • Strategic planning and operational management, • Client relationship management and business development, • Project management and resource planning, • Technical oversight of MEP system design, • Budgeting and financial performance management, • Quality assurance and regulatory compliance, • Strong presentation and stakeholder communication skills Work Environment • Combination of office and field-based work, • Collaboration with engineering teams, clients, and project stakeholders, • Occasional site visits to project locations, • Frequent computer-based work and meetings, • Regional travel as needed Compensation & Benefits • Salary Range: $147,000 – $242,550 per year, • Comprehensive benefits package may include:, • Medical, dental, and vision insurance, • Retirement savings plan (401k), • Paid time off and holidays, • Disability and life insurance, • Parental leave programs, • Professional development and tuition assistance This is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. Pride Global offers eligible employee's comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance and hospital indemnity), 401(k)-retirement savings, life & disability insurance, an employee assistance program, legal support, auto, home insurance, pet insurance and employee discounts with preferred vendors. Thanks & Regards Archit Sharma Senior Associate – Recruitment – EST 609-353-5246 420 Lexington Ave, 30th FL. New York, NY 10170

H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans' status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team. Pre-employment drug testing (EOE) Great Benefits offered! Project Engineer US-PA-Philadelphia Job ID: 2026-2932 Type: Regular Full-Time Category: Engineering Haines & Kibblehouse, Inc. Overview The H&K Group, Inc. is searching for a Project Engineer! The ideal candidate is a self-motivated, organized, competent, and professional individual who manages the planning, design and permitting of civil engineering projects including, but not limited to, highways, subdivisions, and land development. Individual should possess a strong knowledge of stormwater, erosion and sediment control, water and sewer design principles and should be able to interpret and apply municipal land use ordinances. Why work for H&K Group, Inc.? • Competitive salary commensurate with experience, • 100% Company-paid Health Benefits, • 401(k) Savings and Investment Plan, • Tuition reimbursement programs available to qualifying employees for approved programs, • Additional training programs including on the job, online through H&K Academy, manufacturer offered training, and more Responsibilities Essential Duties and Responsibilities • Performs all work according to OSHA and H&K Safety policies, • Prepare thorough site analysis to determine allowable density and layout constraints based upon municipal land use ordinances and site-specific features., • Prepare horizontal and vertical alignment of street layout and profiles., • Prepare detailed grading plans., • Prepare thorough stormwater management design based upon municipal land use ordinances and/or State best management practices/regulations., • Prepare thorough water supply and sewage facilities design., • Prepare erosion and sedimentation control/NPDES plans and post construction stormwater management designs in accordance with State best management practices/regulations., • Prepare utility design and manage utility coordination for various land development projects., • Manage sub-consultants related to geotechnical, wetlands, traffic, etc., • Travel to field, project, Township, etc. meetings to communicate project design aspects with Project Managers, Engineers, Township officials and Clients. (A company fleet vehicle will be provided in such instances.), • Ability to write comprehensive and detailed narratives and various forms of correspondence., • Other duties as assigned Qualifications Required Skills, Education, and Experience • Bachelor’s degree from an accredited four-year college or university OR one year of related experience and/or training, • Equivalent combinations of education and experience may be considered, • Ability to read blueprints and job-related documents., • Strong knowledge of stormwater, erosion, and sediment control, • Strong knowledge of water and sewer design principles, • Strong verbal and written communication skills, • Able to interpret and apply municipal land use ordinances, • Basic computer skills including MS Office (Outlook, Word, Excel), • Experience with specific programs including, • AutoCAD 2017 (or later version), • AutoCAD Civil 3D 2017 (or more recent version), • Hydraflow, • Driver’s license and clean driving record, • Ability to fit test & utilize appropriate PPE as needed, • Ability to meet physical requirements (movement, lifting, as relevant to job) Preferred Skills, Education, and Experience • 2 years of relevant experience and/or training, • Experience using VTPSUHM, • Occasionally required to, • Stand, walk, sit, • Use hands to finger, handle, feel, • Regularly required to talk and hear, • Vision abilities include, • Close, • Distance, • Color, • Occasionally exposed to outside weather conditions, • Noise level is usually moderate, • Hours regularly exceed 40 hours a week The H&K Group, Inc. provides complete heavy civil contracting and construction materials solutions with safety, speed, quality, efficiency, and value. Beginning as a small family business a half century ago, we are now a dynamic group of vertically integrated companies that has been growing and prospering for over 50 years. Thank you for your interest in employment with H&K Group, Inc. At H&K, we invest in our people, providing the essential training, instruction, and supervisory support that they need to develop and grow within our company. We acknowledge that H&K’s strength and success is directly related to our employees and the talents, dedication, and job performance they exemplify. We seek dynamic, motivated people who are driven to make a difference. H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans’ status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team. Pre-employment drug testing (EOE) 100% Company-Paid Health Benefits! PI344df860336d-37820-40201904

Job Description Join JB&B and shape the future of the built environment! Founded in 1915, Jaros, Baum & Bolles has been a pillar of engineering innovation in New York City for over a century. Specializing in mechanical, electrical, plumbing (MEP), JB&B has contributed to some of the most iconic buildings. In October 2025, JB&B joined forces with Trinity Consultants, a global consulting firm focused on the natural and built environments. JB&B now operates within Trinity’s Built Environment division, combining its deep expertise in high-performance building systems with Trinity’s strengths in acoustic design, facility operations, commissioning, and technology strategy. This strategic merger expands JB&B’s capabilities and offers employees: * Access to a broader portfolio of international projects and clients * Enhanced career mobility across Trinity’s global network * Interdisciplinary collaboration with experts in sustainability, environmental science, and digital infrastructure About the Role We are seeking a Project Engineer to join the HVAC department at our Philadelphia office. The Project Engineer is a technically skilled and experienced engineer with excellent communication, coordination, project management and leadership skills. The Project Engineer is expected to proactively coordinate, communicate, problem solve across disciplines, and exhibit the ability to balance the client relationship with an understanding of the project’s financial goals. As a Project Engineer, you’ll play a key role in managing and executing electrical engineering projects from design through completion. You’ll collaborate across disciplines, communicate directly with clients, and help ensure that both technical excellence and project financial goals are achieved. Key Responsibilities • Leads the design on Tenant fit-out projects and is a key designer on base building/infrastructure upgrades; assembles riser diagrams, schedules, and floor plans; participates in specification writing., • Assists in establishing design criteria from the project proposal and assembles basis of design documents., • Assembles a complete set of contract documents for their trade including the lay out main equipment rooms, closets, shafts, risers, etc., • Leads design for their trade’s ancillary systems required for a project and can assemble scope associated drawings with these systems (e.g., UPS, generators, fuel oil, secondary water pumps, water reclamation system, etc.)., • Reviews shop drawings, RFI’s, Contractor change orders, performs site visits and punch-lists with limited supervision to verify that designs are being implemented accurately., • Bachelor’s degree in mechanical or electrical engineering, • 3-6 years of experience, • Excellent oral and written communication skills, • Proficient in all design calculations and software tools (e.g., Revit and AutoCAD) applicable to their discipline, • Strong understanding of trade-specific scope of project, trade-related codes, and the required coordination with other trades, • Strong understanding of documentation requirements and content for each deliverable phase (e.g., SD, DD, CD and specifications) Legacy + Innovation: Our company blends a rich history with forward-thinking design, including smart building systems and deep carbon reduction strategies. * Collaborative Culture: With over 400 professionals, our company fosters mentorship, teamwork, and continuous learning. * Global Impact: Now part of Trinity, our company offers opportunities to work on transformative projects across commercial, healthcare, aviation, life sciences, and data center sectors. * Multiple office locations: New York, Boston and Philadelphia. What We Offer * Hybrid workplace offering the flexibility to work both from home and the office * Comprehensive benefits package including 401k employer match and stock options * Paid time off (PTO), volunteer program and employee resource groups * Training and professional development courses through JB&B University Estimated compensation range: $93,000-$100,000 a year Jaros, Baum & Bolles is an equal opportunity employer. All qualified candidates will receive consideration for employment without regard to race, ethnicity, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, marital status, military veteran status, unemployment status, or any other status protected by law. Powered by JazzHR 4M3hh6IH2N

This Jobot Job is hosted by: Bryna Rabin Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $70,000 - $100,000 per year A bit about us: We are all about owning what we do. From our founding in 1989, we are recognized around the Valley as a prominent contractor who provides quality infrastructure management and construction services to our public and private clients including underground utilities, pipeline rehabilitation, UV CIPP rehabilitation, water and wastewater facilities, street improvements, grading, paving concrete flatwork and structures. We have become 100% employee-owned, giving each employee-owner an enhanced sense of pride and commitment towards their specific contribution to the services we provide. Why join us? Do you want to build the most state of the art projects? We do too! • Competitive Base Salary!, • Competitive Bonus Package!, • Extremely Competitive Benefits Package!, • Employee Ownership!, • Stock Options!, • Flexible Work Schedules!, • Company Truck/Truck Allowance!, • Accelerated Career Growth! Job Details As a Project Engineer your role is: • Project Planning & Execution: Material procurement and expediting, assistance in work planning for self-perform and work activities, oversight and mentoring of engineering staff, Project close-out: involved in coordinating of documentation - deficiencies, warranties, maintenance and final payments, • Project Document Controls & Procedures: Coordinating and reviewing drawings, submissions, specifications, changes and document control, Change management – responsible for set-up, issuing documentation, pricing and change administration, • Subcontract Management: Subcontract administration – defining scope of work, writing subcontracts, answering inquiries, monitoring progress, tracking and processing back charges A Bachelor's degree in Civil, Mechanical, Electrical, Environmental Engineering, Construction Management or comparable Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description We are looking for a Onsite Desktop Support Engineer to provide technical assistance to our clients. You will help install, upgrade and troubleshoot hardware and software systems. If you’re computer-savvy and enjoy supporting end users, we’d like to meet you. To succeed in this role, you should have a problem-solving attitude along with the ability to give clear technical instructions. You should also be familiar with remote troubleshooting techniques. Ultimately, you will ensure prompt and accurate customer service and increase client satisfaction. Note: U.S. citizens and those authorized to work in the U.S. are encouraged to apply. We are unable to sponsor at this time. This position may requires onsite presence and travel to project / client location/s Responsibilities • The Onsite Desktop Support Technician role is to provide a single point of contact for local office end users to receive support and maintenance within the organization's desktop and laptop computing environment, • This includes installing, diagnosing, repairing, maintaining, and upgrading all hardware and equipment (including but not limited to PC, terminals, printers and scanners) to ensure efficient workstation performance, • The person will also solve problem areas (in person) in a timely and accurate fashion and provide end-user assistance where required, • Monitoring queues for incidents or requests that require resolution, • Escalate to L3 team /Vendors in case assistance is required to resolve any issue, • Isolate system issues; diagnose standard software issues & report hardware issues to respective Vendors, • Prioritizing work based on the impact and urgency of the ticket, • Maintain compliance to Client policies and guidelines like desktop/laptop naming conventions, laptop building/rebuilding checklist, surrender, disposal (Kill Disks/Degauss), • For open tickets requiring spares and accessories and work closely with asset management team in coordinating them, • Incident lifecycle management not limited to documenting work notes, attaching relevant knowledge and detailing incident resolution, • Fulfilment of Service Requests where necessary, • Track and report status of IMAC requests, • Verify completion of IMACs, • Enable end user / equipment Installs, Moves, and changes (IMAC) Requests, • Install new or enhanced functions or features: hardware, software, peripherals and configurations (e.g., peripheral upgrades, system reconfigurations, special requisition installations), • User Data Transfer on need basis, • Hardware support to desktops, laptops (Windows/Mac.), Thin clients (Windows and Linux), Printers, Scanners, • Hardware imaging, deployment, and repair management services, • When de-installing equipment, de-tag equipment, erase and dispose of data and information residing on hard drives, strip for disposal, update in the asset tracking system that the equipment has been de-installed and disposed of, and prepare the equipment to the vital 3rd party for collection and disposal, • Steady State Asset Refresh (Does not include project activity of bulk device replacement), • Assist asset management team in sharing the IMACs for new installations, movement on floors and carrying out physical verification activities, • Replacement of consumables for network printers and reporting issues to the appropriate vendor, • VIP Support (white glove service), • Inventory management and labelling of devices within Client office environment, • Handling shipping and receiving requests for movement of end devices within Client office Requirements • Proven work experience as a Desktop Support Engineer, Technical Support Engineer or similar role, • Hands-on experience with Windows/Linux/Mac OS environments, • Working knowledge of office automation products and computer peripherals, like printers and scanners, • Knowledge of network security practices and anti-virus programs, • Ability to perform remote troubleshooting and provide clear instructions, • Excellent problem-solving and multitasking skills, • Customer-oriented attitude, • No minimum qualification as long as you have experience

Project Engineer! The ideal candidate is a self-motivated, organized, competent, and professional individual who manages the planning, design and permitting of civil engineering projects including, but not limited to, highways, subdivisions, and land development. Project Managers, Engineers, Townshi

Job DescriptionThe primary role of Geotechnical Engineer is the design and execution of geotechnical projects. The incumbent performs field geotechnical explorations and investigations, reviews soils laboratory test results, and performs analysis and design of geotechnical data and projects. KEY JOB DUTIES • Perform geotechnical analysis and studies to assess potential mitigation options for geohazards including seismic analysis, karst evaluation, etc., • Plan and conduct geotechnical explorations. Perform appropriate calculations for the design of foundations, retaining walls, horizontal directional drills, and slope stability., • Assist in developing proposals and determine cost and schedule for investigations., • Provide directions to technical team in field inspection activities., • Interact with customers and team members to complete the assigned project on-time., • Assist Program Manager in design and evaluation of construction documents and projects., • Develop design drawings and specifications for construction projects., • Review and approve geotechnical designs developed by outside consultants., • Review construction design proposals and approve geotechnical aspects., • Evaluate team performance and determine training needs to meet performance objectives.Education/Skills:, • BS in Civil Engineering/Geotechnical Engineering or related field., • 3-7 years of relatable experience required., • Knowledge and understanding of industry codes and standards., • FE Mandatory, PE highly preferred., • Strong written and verbal communication skills and critical thinking skills., • Ability to meet deadlines and manage priorities is important., • Time management and organizational skills and the ability to deal effectively with stressful situations., • Experience in engineering, procurement, and construction projects is desirable., • Solid analytical and problem-solving skills. Accuracy and attention to detail are important., • Proficiency with applicable software applications., • Ability to elicit cooperation from a wide variety of sources, including internal resources and clients.

Job DescriptionCompany Description CRB is a leading provider of sustainable Engineering, Architecture, Construction and Consulting solutions to the global life sciences and food and beverage industries. Our employees provide best-in-class solutions that drive success and positive change for our clients, our people and our communities. CRB is a privately held company with a rich history of serving clients throughout the world, consistently striving for the highest standard of technical knowledge, creativity and execution. Job Description We are seeking a Lead Structural Engineer. This role is ideal for a seasoned professional who thrives in a leadership position, overseeing structural engineering efforts across a wide range of project types and complexities. You’ll be responsible for managing discipline-specific budgets, guiding engineering teams, and ensuring the successful delivery of high-quality structural solutions. Key Responsibilities * Project Leadership: Lead the structural discipline on projects of varying size and complexity, from concept through construction. Manage discipline-specific budgets and ensure alignment with project goals and client expectations. * Team Management & Mentorship: Direct and support a team of engineers and designers (Entry-Level to Senior), overseeing workflows, task execution, and professional development. * Client & Stakeholder Coordination: Serve as a primary point of contact for clients and external partners. Coordinate with internal disciplines to ensure seamless project integration. * Technical Oversight: • Develop and review construction drawing packages and specifications for advanced and complex projects., • Conduct quality checks, including technical verification of design calculations and documentation., • Identify and resolve non-compliant conditions during site walks and construction field surveys. Construction Support: Provide advanced support during construction phases, including RFI responses, submittal reviews, punch list development, and progress reporting. * Project Planning: Collaborate with Project Managers on proposals, man-hour estimates, and scheduling for the structural scope of work. * Design Leadership: Lead system design programming and master planning efforts. Guide the execution of advanced structural designs and ensure technical excellence. Qualifications • ABET-accredited Bachelor’s degree in discipline-specific field, • Minimum of 10 years of experience for Lead position, preferably in a design firm setting, • Minimum of 15 years of experience for Senior position, preferably in a design firm setting, • Proficiency in structural-specific software, • Advanced experience with performing engineering calculations, and developing and implementing list of discipline systems designs, • Advanced experience with the structural material codes, • Intermediate experience with other applicable industry standards, • Intermediate experience with applicable building codes, • Proficient at advanced internal and external cross-discipline project team coordination, • Proficient at coordinating with construction trade partners, vendors and manufacturers, • Proficiency in AutoCAD and Revit, • Proficiency in Microsoft Office suite, • Experience with internal discipline design and engineering training presentations, • Experience with troubleshooting issues with discipline and systems Additional Information All your information will be kept confidential according to EEO guidelines. CRB is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Employment is contingent on background screening. CRB does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of CRB without a prior written search agreement will be considered unsolicited and the property of CRB. Please, no phone calls or emails. CRB offers a complete and competitive benefit package designed to meet individual and family needs. If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Job DescriptionNDI Engineering Company is seeking an Electrical Engineer to join our team supporting the design of US Navy test facilities, as well as other design projects. Position to be performed on-site at our Thorofare, NJ, office. The ideal candidate will have experience in design of Naval Ship Hull, Mechanical and Electrical (HM&E) systems or power plant systems; have experience supporting design projects, particularly in AutoCAD; have experience applying the NEC; demonstrate an attention to details; and, possess strong communication skills. Job Responsibilities • Review and incorporate customer furnished information from scoping documentation., • Conduct site investigations in an industrial environment., • Conduct and document analysis supporting the suitability of electrical designs and make recommendations with engineering sketches of concepts which address design issues., • Review and check engineered drawings of electrical systems., • Participate in design meetings with the project team and customers.Minimum Requirements, • Must be a U.S. Citizen and be able to obtain and maintain a U.S. Department of Defense Security Clearance., • Must possess a Bachelor of Science in Electrical Engineering degree; Professional Engineer or Engineer in Training Certification preferred but not required, • Must have at least 5 years of electrical engineering experience., • Must have AutoCAD experience; Must have experience using Microsoft Office and Outlook., • Work to be in the NDI office is required but work schedule flexibility may be provided upon request.NDI Engineering Company is a privately-held small business consulting firm. NDI provides engineering and technical services to Government clients chartered with responsibility for the defense of our country. NDI offerings include naval architecture, marine, civil, structural, mechanical, and electrical engineering and design services. NDI has an ISO 9001:20015 Certified Quality System and was a prior recipient of the U.S. Small Business Administration Region II, Prime Contractor of the Year Award. NDI's corporate office is located in Thorofare, NJ with additional offices at the Naval Business Center, Philadelphia, PA, and Virginia Beach, VA. NDI Engineering Company is an Equal Opportunity Employer. This contractor and subcontractor shall abide by the requirements of 41 CFR §§ 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, or national origin. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status Powered by JazzHR Xxlpy3hLk6

Job Description Overview CTG is seeking to fill a Backend Developer - SQL, .NET, Python opening for our client in Philadelphia, PA. Location: Philadelphia, PA Duration: 12 months Overview: The Backend Developer will provide design and technical direction in the development of new or existing applications to solve complex problems. This role involves serving as a principal application designer, ensuring solutions are technologically sound, and providing analytical leadership. The engineer will engage in day-to-day support activities and special projects, while directing and mentoring less experienced personnel. Primary Responsibilities: • Complete and oversee systems analysis, design, and development for projects of varying complexity., • Act as an individual contributor on complex projects, maintaining a strong understanding of supported applications., • Direct and monitor the work of less experienced team members, coordinating development tasks on projects of all sizes., • Prepare and manage the technical components of project plans., • Collaborate with Development, Operations, and Technology staff throughout the systems development lifecycle, from technical analysis to user acceptance testing., • Prepare test data, execute detailed test plans, and perform debugging as required., • Analyze and understand the complex interrelationships among programs and applications., • Provide analytical consulting to identify and implement new uses of information technologies aligned with business objectives., • Prepare and review comprehensive technical and functional specifications and documentation., • Maintain efficient operation of supported applications and recommend improvements or new technologies., • Promote and follow development standards and procedures., • Assist in developing expense and capital budgets as necessary., • Ensure adherence to the company's risk and regulatory standards, escalating risk-related issues as needed. Education and Experience Required: • Minimum of an Associate's degree and 5 years of systems analysis/application development experience, or a combined minimum of 7 years of higher education and/or work experience, including 5 years of relevant experience., • Familiarity with application development software and hardware platforms., • Proficiency in personal computers and relevant project management, word processing, and spreadsheet software., • Strong problem-solving skills and ability to manage multiple complex projects., • Excellent verbal and written communication skills, with experience in presenting to varied audiences., • Good understanding of the Bank's application framework., • Subject matter expertise in the business with knowledge or experience utilizing the supported application/system., • Advanced understanding of supported applications and knowledge of interfacing applications., • Ability to work effectively in both team environments and autonomously., • Strong multitasking skills for various components of complex projects. CTG does not accept unsolicited resumes from headhunters, recruitment agencies, or fee-based recruitment services for this role. To Apply: To be considered, please apply directly to this requisition using the link provided. For additional information, please contact Laura Dominguez at . Kindly forward this to any other interested parties. Thank you!

Job Description Electrical Engineer Philadelphia, PA metro including Cherry Hill, NJ Direct Hire/ Permanent Placement $70k-$150k (entry level to sr. roles open), Hybrid, Full Benefits, 401k match, The client in Cherry Hill, NJ is open to training the right Candidate as long as they are Revit proficient. THE CLIENT +/- 100 person MEP+ firm specializes in Healthcare, Education, Infrastructure, Government, Energy/ Power, etc. ROLE/ RESPONSIBILITIES • Electrical design of power distribution, lighting, fire alarm in accordance with NEC codes and standards, • Electrical equipment calcs, selection, and layout of switchgear, transformers, electrical panels and emergency generators, • Design recommendations, decisions, planning, delegating, reviewing, and QC of work from junior staff, • Project Management and client/ site visits REQUIRED SKILLS AND EXPERIENCE • Bachelor’s degree in Electrical Engineering, Architectural Engineering, or similar, • REVIT, AutoCAD, • EIT or PE preferred

Job Description • Bachelor's Degree (BS) in Mechanical Engineering, • PE License preferred., • Minimum of 5 - 10 years’ experience, • Experience with HVAC systems, plumbing and fire protection, • Required knowledge of AutoCAD and preferably REVIT software, • LEED Certification or Certified Energy Auditor/Manager a plus Responsibilities: We are looking for a talented engineer with the ability to develop mechanical drawings and specifications. The successful candidate must have design knowledge of engineering and construction of HVAC, boilers, chillers, plumbing, fire protection, electrical systems, BIM, renewable energy and energy conservation. Must have previous experience with engineering investigations/assessments of facilities, designing of building mechanical systems, economic analysis of alternate HVAC systems, specifications, codes. Additional Information: We offer competitive salaries with a variety of medical benefit plans, long-term disability, holiday, vacation/sick leave, 401K and tuition reimbursement. Miller-Remick is an Equal Opportunity Employer. Company DescriptionMiller-Remick is a Service-Disabled Veteran Owned Small Business that is fully staffed with Project Management and Engineering professionals specializing in Mechanical, Electrical, Structural, HVAC, Plumbing, Fire Protection, Piping, Process, and Controls. Our full-service team brings the experience necessary to deliver industry-leading solutions to our clients. Miller-Remick has a history of success leading project teams, encompassing a full array of sub-consultants, including architects and other design trades. We provide engineering, design and construction services as the Prime on highly complex projects for federal, state and local government clients. We have developed the expert personnel, management tools and service-oriented work ethic required to service clients in the following markets: healthcare, government, energy/power, institutional, and infrastructure.Miller-Remick is a Service-Disabled Veteran Owned Small Business that is fully staffed with Project Management and Engineering professionals specializing in Mechanical, Electrical, Structural, HVAC, Plumbing, Fire Protection, Piping, Process, and Controls. Our full-service team brings the experience necessary to deliver industry-leading solutions to our clients.\r\n \r\nMiller-Remick has a history of success leading project teams, encompassing a full array of sub-consultants, including architects and other design trades. We provide engineering, design and construction services as the Prime on highly complex projects for federal, state and local government clients. We have developed the expert personnel, management tools and service-oriented work ethic required to service clients in the following markets: healthcare, government, energy/power, institutional, and infrastructure.

Job Description Mechanical Engineer/ Project Manager Philadelphia, PA Direct Hire/ Permanent Placement $100k-$160k, Hybrid, Full Benefits, Bonuses, 401k match, Unlimited Vacation THE CLIENT Multidisciplinary engineering arm of A&E firm specializes in Corporate offices, Higher Education, Hospitals, Airports, Sports Complexes, etc. ROLE/ RESPONSIBILITIES • HVAC design (airside, hydronic, steam) for a wide variety of multi-disciplinary (A&E) project types, • Project Manager for engineering projects, • Interface with clients, • Generate and track project delivery schedule, fees, budgets, • Equipment sizing and calculations, load calculations, systems applications, Energy modeling REQUIRED SKILLS AND EXPERIENCE • Bachelor’s degree in Mechanical Engineering, Architectural Engineering, or similar, • REVIT, AutoCAD, Trane Trace or IES VE Energy Modeling software, • P.E., • 5+ years of US industry experience post degree

Job DescriptionLead Field Service Engineer - Marine Drives Job Summary A global industrial technology company is seeking a Lead Field Service Engineer – Drives to support the installation, commissioning, and lifecycle service of advanced medium-voltage drive systems. Operating under minimal supervision, this role provides critical technical expertise to ensure the integrity, performance, and reliability of power conversion solutions at client sites, including offshore and shipyard environments. Lead Field Service Engineer - Marine Drives Responsibilities • Execute and oversee engineering tasks to ensure accurate installation and commissioning of drive systems at customer facilities, • Perform complex troubleshooting and diagnostics to resolve equipment issues and implement corrective actions, • Generate technical documentation such as daily logs, service reports, commissioning and maintenance procedures, • Act as a project lead at job sites and guide small teams to meet customer needs and project timelines, • Deliver technical training and system operation briefings to clients and end users, • Collaborate with internal teams including sales, service, engineering, and parts departments to identify and implement customer solutions, • Recommend upgrades, spare parts, or services to enhance system performance and customer satisfaction, • Coordinate inspection planning and maintenance scheduling with customer teams, • Support engineering input on retrofit and modernization projects, including during the bidding process, • Provide on-call emergency support and remote troubleshooting when needed, • Adhere to safety protocols during work performed onboard vessels, offshore, or in shipyard settings, • Be available for extended travel assignments, including work during weekends or overtime in peak periodsLead Field Service Engineer - Marine Drives Position Requirements, • Bachelor’s degree in Electrical Engineering or related discipline, • OR Associate degree in a relevant field with 5+ additional years of relevant experience, • At least 5 years of hands-on field service or commissioning experience with electrical or drive systems, • U.S. Citizenship with the ability to obtain security clearance for defense-related projects, • Willingness and availability to travel up to 85%, often on short notice, • Must be physically capable of working onboard vessels and offshore environments, • Ability to complete HUET (Helicopter Underwater Escape Training) and offshore survival certification, • Must be based in or able to travel to the greater Philadelphia, PA area for deploymentsLead Field Service Engineer - Marine Drives Preferred Position Requirements, • 3+ years of experience with drive platforms such as MV7000, SD7000, or MV3000, • Strong technical skills and ability to work independently on complex system installations and troubleshooting, • Proficiency in technical leadership and team coordination on-site, • Ability to deliver training, write technical documentation, and manage customer relationships effectively #LI-OnsitePandologic. Keywords: Field Engineer, Location: Philadelphia, PA - 19122 , PL: 602225757

Job DescriptionSenior Network EngineerEmployment Type: Full TimeDepartment: Information Technology CGS is seeking an experienced Senior Lead Network Engineer to join a team focused on the evaluation, enhancement, and maintenance of a large-scale network project that includes both wired and wireless network infrastructure and related hardware & software. The project's objectives are to evaluate the current setup of existing disparate networks and design & implement a network infrastructure that encompasses the wireless, wired, and software network requirements. The project will also include consultation regarding hardware and software necessary to facilitate the proper support for this encompassing infrastructure, and the associated systems testing, vulnerability assessments, and quality assurance needed to implement the new setup. This Network Engineer will interface with state and local governmental personnel, internal stakeholders, subject matter experts, and vendor(s) who will provide development services. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:- Operate and manage NPS network infrastructure;- Improve infrastructure monitoring and reporting capabilities based on the deployment of network management software;- Develop, maintain and deliver infrastructure documentation relating to the network infrastructure within the NPS environment;- Review current best practices and provide recommendations for architecture, design, management and operation of the network infrastructure;- Administration of the Cloudpath (or equivalent) onboarding process, monitoring and troubleshooting of wireless network health, maintenance of wireless network infrastructure, implementation of network security patches and software/firmware updates, from 0800 to 1700 PST, Monday-Friday;- Assess the NPS network infrastructure and make recommendations on improvement and optimization;- Define and conduct testing procedures for new infrastructure projects;- Implement technology solutions within the NPS network environment;- Provide design guidance on network solutions within NPS infrastructure projects;- Provide informal training and knowledge transfer to NPS resources on best practices and theory of operation relating to network products. Qualifications:- Bachelor’s Degree from an accredited college or university in Engineering, Computer Science, Business, Information systems or a related discipline.- Strong documentation skills including updating JIRA Tickets, Wiki Pages and Network Diagrams- Ability to communicate with end users, cross-organizational staff and technical assistance center.- CWNA Certification or equivalent- BCNE Certification or equivalent- Experience utilizing (RF) site survey tools such as Ekahau, RF Scanners and Wireshark packet capture software- Strong knowledge of layer 2 switching and layer 3 routing protocols; including VLANs, 802.1w, OSPF and VRRP- Strong knowledge of network security including; 802.1x, MAC Authentication, ACLs, RADIUS and Certificate of Authority (CA)- Strong knowledge of troubleshooting RF and LAN issues- Working knowledge of LINUX, MS Server 2013, VMware, etc.- A Master’s Degree in Engineering, Computer Science, Business, Information systems or a related discipline- At least 3 years experience with disaster recovery plan creation / implementation testing or projects - Experience with penetration testing, vulnerability assessment, and vulnerability testing- Experience with cyber threat information collection and analysis- Working knowledge of Agile/SCUM project management methodologies- Additional Industry certifications/licences Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work.Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation!Explore additional job opportunities with CGS on our Job Board: more information about CGS please visit: or contact:Email: #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionNetwork EngineerEmployment Type: Full Time, Experienced levelDepartment: Information Technology CGS is seeking an experienced Network Engineer to join a team focused on the evaluation, enhancement, and maintenance of a large scale network project that includes both wired and wireless network infrastructure and related hardware & software. The project's objectives are to evaluate the current setup of existing disparate networks and design & implement a network infrastructure that encompasses the wireless, wired, and software network requirements. The project will also include consultation regarding hardware and software necessary to facilitate the proper support for this encompassing infrastructure, and the associated systems testing, vulnerability assessments, and quality assurance needed to implement the new setup. This Network Engineer will interface with state and local governmental personnel, internal stakeholders, subject matter experts, and vendor(s) who will provide development services. CGS brings motivated, highly skilled, and creative people together to solve government’s most dynamic problems with cutting edge technology. To carry out our mission, we are seeking candidates that are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:- Operate and manage NPS network infrastructure;- Improve infrastructure monitoring and reporting capabilities based on the deployment of network management software;- Develop, maintain and deliver infrastructure documentation relating to the network infrastructure within the NPS environment;- Review current best practices and provide recommendations for architecture, design, management and operation of the network infrastructure;- Administration of the Cloudpath (or equivalent) onboarding process, monitoring and troubleshooting of wireless network health, maintenance of wireless network infrastructure, implementation of network security patches and software/firmware updates, from 0800 to 1700 PST, Monday-Friday;- Assess the NPS network infrastructure and make recommendations on improvement and optimization;- Define and conduct testing procedures for new infrastructure projects;- Implement technology solutions within the NPS network environment;- Provide design guidance on network solutions within NPS infrastructure projects;- Provide informal training and knowledge transfer to NPS resources on best practices and theory of operation relating to network products. Qualifications:- Bachelor’s Degree from an accredited college or university in Engineering, Computer Science, Business, Information systems or a related discipline.- Strong documentation skills including updating JIRA Tickets, Wiki Pages and Network Diagrams- Ability to communicate with end users, cross-organizational staff and technical assistance center.- CWNA Certification or equivalent- BCNE Certification or equivalent- Experience utilizing (RF) site survey tools such as Ekahau, RF Scanners and Wireshark packet capture software- Strong knowledge of layer 2 switching and layer 3 routing protocols; including VLANs, 802.1w, OSPF and VRRP- Strong knowledge of network security including; 802.1x, MAC Authentication, ACLs, RADIUS and Certificate of Authority (CA)- Strong knowledge of troubleshooting RF and LAN issues- Working knowledge of LINUX, MS Server 2013, VMware, etc.- A Master’s Degree in Engineering, Computer Science, Business, Information systems or a related discipline- At least 3 years experience with disaster recovery plan creation / implementation testing or projects - Experience with penetration testing, vulnerability assessment, and vulnerability testing- Experience with cyber threat information collection and analysis- Working knowledge of Agile/SCUM project management methodologies- Additional Industry certifications/licences Our commitmentContact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting edge technology with world-class personnel to deliver customized solutions that fit our clients’ specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years we’ve been growing our government-contracting portfolio, and along the way we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work. Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package:- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran Join our team and become part of meaningful government innovation! Explore additional job opportunities with CGS on our Job Board: For more information about CGS please visit: or contact:Email: #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description POSITION SUMMARY: The MEP department is seeking an Electrical Engineer with 8+ years of relevant experience in electrical power, lighting and fire alarm/systems design for educational, commercial and industrial facilities to expand its growing MEP division. PRIMARY DUTIES: • Prepare electrical design for large scale projects-industrial, institutional, office, retail, healthcare and other, • Apply design knowledge in power distribution, grounding, lighting, control systems, and equipment specifications and selections, • Analyze complex engineering problems and offer effective resolutions, • Ability to direct a team of designers and support personnel, • Interact with all engineering disciplines, construction project managers, and clients, • Lead an electrical design group on large scale projects, • Work within company policy and OSHA Safety rules, • Must have advanced knowledge of electrical engineering and design and be familiar with applicable codes for building, energy, and construction standards and acceptable industry practices, • Must be able to travel up to 10% of the time, • 10+ years of formal experience in electrical system design for buildings, • Experience with Engineering Design software including SKM, • Experience with Lighting Design and Photometric Software, • Experience with latest versions of AutoCAD, • Must have experience as a project lead on complex, multi-discipline engineering design projects., • Strong verbal and written communication skills required with the ability to prepare written specifications, letters, reports and related contract documents. EDUCATION/EXPERIENCE: • Must possess Bachelor or Master’s degree in electrical engineering CERTIFICATIONS/LICENSES REQUIRED • PE License Required PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee occasionally works in the field and may be exposed to outside weather conditions. Work requires frequent and prolonged computer use. May occasional lifting up to 25 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. The annual base salary range for this full-time position in the United States is $92,000 - $151,800. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins. This position is subject to a background check, in accordance with company policy and applicable laws. Employment is also contingent upon verification of eligibility to work in the United States. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary.

Job Description About ISI Professional Services ISI Professional Services provides mission-critical expertise across a wide range of functional and operational areas. ISI brings over 30 years of experience providing tailored workforce and project management solutions across the U.S. we specialize in Program and Project Management, Construction Management, Real Estate Advisory, Acquisition Management, Logistics, Leadership Development, and more. At ISI, our people are the heart of our success. We prioritize engagement, professional growth, and a strong culture to succeed together. As a Service-Disabled Veteran Owned Small Business (SDVOSB), we are proud to support Veterans by creating opportunities for them to succeed. Join ISI and be part of a team making a meaningful impact—delivering excellence and exceeding expectations every step of the way. We offer a comprehensive and competitive benefits package. The salary range represents a general guideline as ISI considers several factors when determining compensation to include but not limited to the candidate’s experience, education, skills, and market location of the position. Position Summary ISI seeks an Electrical Engineer with RCDD certification to support the Department of Veterans Affairs (VA) on the Electronic Health Record Modernization (EHRM) Infrastructure Upgrade at the Philadelphia VA Medical Center. The Electrical Engineer (CM-EE) will provide onsite construction management, quality assurance, and technical oversight for all electrical, telecommunications, and low-voltage systems supporting the EHRM program. This position serves as a key technical resource within a multidisciplinary CM team—collaborating with the Project Manager, Construction Administrator, Mechanical Engineer, Scheduler, and VA stakeholders. The ideal candidate is a proactive professional experienced in healthcare and information technology (IT) environments, where reliability, compliance, and system integration are essential. Experience in healthcare and information technology (IT) projects/facilities is critical. Key Responsibilities • Provide technical direction and oversight of electrical and telecommunications scope elements, ensuring compliance with VA design standards and the project’s EHRM objectives., • Lead and perform daily inspections and QA/QC monitoring for electrical and communications installations., • Manage and review contractor submittals, RFIs, and shop drawings via VA’s OpCenter system., • Support the COR in reviewing project schedules, pay applications, and change order proposals., • Track and update project progress; prepare and maintain daily and weekly inspection reports., • Conduct and document weekly construction meetings, including agendas, minutes, and issue logs., • Participate in commissioning (Cx) activities and verification of system functionality., • Ensure full compliance with NFPA, NEC, VA TIL standards, The Joint Commission (TJC), OSHA, and other applicable codes., • Assist in schedule impact reviews, claims analysis, and constructability assessments., • Maintain professional documentation and technical records to support government oversight.Minimum Qualifications, • Bachelor’s degree in Electrical Engineering from an accredited institution., • Registered Communications Distribution Designer (RCDD) certification required., • Minimum 6 years of experience in both electrical design and construction of telecommunications or data communications infrastructure., • Demonstrated ability to read and interpret construction documents and communicate effectively with government and contractor stakeholders., • Strong proficiency with MS Office, Bluebeam, and scheduling tools such as Primavera or MS Project., • Experience in healthcare and information technology (IT) projects/facilities is critical., • Applicants must be U.S. citizens, lawful permanent residents, or other non-U.S. citizens lawfully authorized to work in the United States without employer sponsorship, must have at least three (3) years of U.S. residency, and must be able to successfully obtain and maintain a VA PIV credential., • Must be able to obtain and maintain a VA Public Trust clearance.Preferred Qualifications, • Experience with VA or DOD medical center projects., • Knowledge of EHRM or data center electrical infrastructure., • Experience with commissioning (Cx), life-safety, or critical power systems., • Familiarity with OpCenter, Procore, or other federal construction management platforms.Physical / Work Environment, • This position is full-time and fully onsite at the Philadelphia VA Medical Center., • No regular travel is anticipated., • Standard 40-hour work week, Monday–Friday, 8:00 a.m.–5:00 p.m.

Job Description Engineer III – NSWCPD Code 24 Company Overview: KMS Solutions, LLC is a technical management / solutions company that specializes in engineering, analysis, and cyber security. Founded in 2005, KMS is a certified small business with nearly two decades of experience supporting the Department of Defense as well as many other departments and programs critical to our Nation’s security and well-being. KMS is a two-time winner of the USA Today Top Workplaces recognizing quality workplace cultures across the United States who put their employees first. Additionally, we received the Providence Journal Rhode Island Top Workplaces award and Culture Excellence Awards for Compensation & Benefits, Innovation, Leadership, Purpose & Values and Work-Life Flexibility Position Summary / Objective: The Naval Surface Warfare Center Philadelphia Division (NSWCPD) is a Department of Defense entity responsible for research and development, test and evaluation, engineering, and Fleet support services for the Navy’s ships, submarines, military watercraft, and unmanned vehicles. This position supports NSWCPD Code 24 which is responsible for program management, engineering, technical, and logistics support for Hull, Mechanical, and Electrical (HM&E) systems on U.S. Navy Submarines. Essential functions: Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. • Assist NSWCPD with issuing Fleet-messages, ISEA Advisories, and technical notices to the Fleet and other agencies todisseminatevital information, • Receive, evaluate, and interpret information received from Fleet, as well as all relevant data sources, to determine the best course of action to insure reliable operation of the effected submarine systems and report findings., • Provide engineering and technical support regarding the design, repair, qualification, installation, modification, operation, maintenance, troubleshooting, and testing of U.S. Navy submarine propulsion, electrical, mechanical, auxiliary and information systems., • Provide shipboard-troubleshooting and onsite support to resolve issues as requested and support ongoing waterfront maintenance activities regarding submarine-HM&E systems., • Assist NSWCPD with the development, preparation, assessment, and conduct or monitoring of proposed test procedures on U.S. Navy submarine propulsion, electrical, mechanical and information systems., • Analyze CASREPs, Maintenance and Material Management (3M), Detailed Feasibility Studies and other data to identify unfavorable technical (and associated cost) and/or reliability trends., • Provide support for laboratory-scale testing and evaluation (T&E) and shipboard/land-based T&E efforts related to U.S. Navy submarine propulsion, electrical, mechanical, auxiliary and information systems., • Assist with NSWCPD HM&E commitment distribution and tracking., • Provide assistance tothe Submarine Propulsion Plant Engineering Activity (SUB PPEA)., • Perform other related duties as assigned. Required education and experience: • Bachelor’s degree in engineering from an accredited university or Maritime Academy., • Seven (7) years of experience with U.S. Navy systems, including mechanical/electrical system design, repair, installation, modification, operation, maintenance, troubleshooting, and testing of Submarine equipment or systems. Preferred education and experience: • Navy and/or NAVSEA experience., • 7 years of experience. Competencies: • Proficiency in Microsoft Office, specifically, Word, Excel, PowerPoint, and Outlook software., • Excellent verbal and written communication skills, as well as presentation skills., • Excellent organizational skills and attention to detail., • Excellent time management skills with a proven ability to meet deadlines., • Strong analytical and problem-solving skills., • Ability to prioritize tasks and to delegate when appropriate., • Thorough understanding of, or the ability to quickly learn about the project or product being developed., • High comfort level working with and around all military/organizational levels, clients, customers, suppliers, and visitors., • Must be highly reliable and demonstrate personal initiative to operate in a fast-paced environment with changing priorities. Additional eligibility requirements Work authorization/security clearance requirements: An active DoD Secret security clearance. Other Duties: Please note this job posting is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Supervisory Responsibility: None. Work Environment: This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, and photocopiers. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. Excellent listening skills are essential. The employee frequently is required to stand, walk, use hands to finger, handle or feel, and reach with hands and arms. Must be able to lift up to 20 lbs. Position Type/Expected Hours of Work: The typical workday is eight hours in length. Some flexibility in hours is allowed, with concurrence from the supervisor. Attendance at prescheduled mandatory meetings is required. Must be available during the core work hours as determined by your contract/location and must account for the required number of hours in a pay period to maintain Full-time status. Telework: • Situational telework may be allowed for this position subject to customer requirements/expectations. Travel: • Ability to travel CONUS; potential to travel OCONUS, • Travel up to10%may berequired. Benefits and Additional Compensation: KMS offers a competitive benefits packaging including medical, dental and vision insurances, flexible spending account, PTO, paid holidays, military leave, bereavement leave, 401k / retirement savings plan, professional development and tuition reimbursement, basic and voluntary life insurance / AD&D, short-term and long-term disability, voluntary AFLAC supplemental insurance products and employee assistance plan (EAP) program. Additionally, KMS offers employee referral bonuses and a discretionary annual bonus. AAP/EEO Statement: KMS Solutions provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. KMS Solutions is a drug free workplace. #LI-KMS #ZR

Job Description Geotechnical Project Manager Requisition Number: 2025-1580-16 Locations: Greensboro, NC; Augusta, GA; Duluth, GA; New Albany, IN Relocation Required (Assistance Provided) S&ME is seeking experienced, forward-thinking Geotechnical Engineers who are eager to lead and grow our teams, whether as a technical expert or as a manager of a team or department. This is a high-impact opportunity where you'll drive technical excellence, shape projects, and influence the development of both people and business in a collaborative environment. We're open to candidates interested in relocating to Augusta or Duluth, GA; Greensboro, NC; New Albany, IN -each offering a compelling mix of career opportunities and quality of life. Whether it's the balanced pace and growing economy of Greensboro, the proximity to Louisville and strong Midwest market in New Albany, the relaxed pace and low cost of living in Augusta, or the vibrant energy and access to Atlanta from Duluth, these locations provide the chance to grow your career without sacrificing lifestyle. We are offering a generous sign-on bonus to help you start strong with S&ME in any of these locations. Why Join Us: Since 1974, S&ME has partnered with diverse clients across public, private, energy, and transportation markets of all sizes. We pursue the most technically challenging and impactful projects as we pride ourselves on our people, client service and technical expertise. From schools and hospitals to airports, industrial facilities, data centers and pipelines, our work contributes to building safer, better places for people to live and work. We hire engineers to lead, make decisions, influence, be challenged, grow and make a difference. We foster a culture built on our core values: Listen First, Work and Grow Together, Do the Right Thing and Do Things Right, Do What You Say, Lead From Where You Are, and Be Safe. These core values are referenced regularly in examples and behaviors to truly live by them. Key Responsibilities: • Leadership & Team Management: Lead and manage a multidisciplinary geotechnical team, overseeing daily operations, project delivery, safety, quality, financial performance, HR, and risk. Mentor and develop staff while fostering a collaborative, engaged culture., • Business Planning & Strategy: Partner with leadership to develop and execute annual business plans and support long-term growth strategies for the office and regional markets., • Project Management: Oversee geotechnical projects of varying complexity, including proposals and technical reports, ensuring quality, consistency, and coordination with senior technical leaders., • Business Development: Drive growth through client relationships and cross-selling services across Environmental, Geotechnical, and Construction Materials Testing., • Industry Engagement: Represent the company in professional organizations to enhance brand visibility and expand networks. Qualifications: • Education: Bachelor's degree in Civil, Structural, or Geotechnical Engineering, or a related construction field, • Experience: Minimum of 4 years managing and supporting geotechnical engineering projects, • Licensure: Professional Engineer (PE) Key Competencies: • Strong understanding of consulting within the A/E/C industry, • Proven ability to build client relationships and win new business, • Ability to balance office responsibilities with regular field engagement, • Commitment to delivering responsive, high-quality client service, • Leadership mindset with a passion for mentoring and team development What We Can Offer: • Competitive compensation package, • Generous sign-on bonus, • On-site visit for you (and spouse/partner, if applicable), • PE Licensure transfer support for NC, • Comprehensive benefits package, • 100% Employee Stock Ownership Program (ESOP), • Opportunities for leadership growth and professional development Apply Today Join S&ME and be part of a team that values collaboration, innovation, and making a lasting impact in the communities we serve. This full-time role offers competitive pay based on experience. Candidates must comply with our Fleet Management, Substance Policy, and Reference Check requirements. Only candidates with valid employment eligibility (I-9) will be considered. Visa assistance is not available. S&ME reserves the right to hire internally or externally at any time. No candidate/recruiter calls, personal calls, or walk-ins are accepted. Job Posted by ApplicantPro

Job Description Engineer II – NSWCPD Code 24 Company Overview: KMS Solutions, LLC is a technical management / solutions company that specializes in engineering, analysis, and cyber security. Founded in 2005, KMS is a certified small business with nearly two decades of experience supporting the Department of Defense as well as many other departments and programs critical to our Nation’s security and well-being. KMS is a two-time winner of the USA Today Top Workplaces recognizing quality workplace cultures across the United States who put their employees first. Additionally, we received the Providence Journal Rhode Island Top Workplaces award and Culture Excellence Awards for Compensation & Benefits, Innovation, Leadership, Purpose & Values and Work-Life Flexibility Position Summary / Objective: The Naval Surface Warfare Center Philadelphia Division (NSWCPD) is a Department of Defense entity responsible for research and development, test and evaluation, engineering, and Fleet support services for the Navy’s ships, submarines, military watercraft, and unmanned vehicles. This position supports NSWCPD Code 24 which is responsible for program management, engineering, technical, and logistics support for Hull, Mechanical, and Electrical (HM&E) systems on U.S. Navy Submarines. Essential functions: Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. • Assist NSWCPD with issuing Fleet-messages, ISEA Advisories, and technical notices to the Fleet and other agencies to disseminate vital information, • Receive, evaluate, and interpret information received from Fleet, as well as all relevant data sources, to determine the best course of action to insure reliable operation of the effected submarine systems and report findings., • Provide engineering and technical support regarding the design, repair, qualification, installation, modification, operation, maintenance, troubleshooting, and testing of U.S. Navy submarine propulsion, electrical, mechanical, auxiliary and information systems., • Provide shipboard-troubleshooting and onsite support to resolve issues as requested and support ongoing waterfront maintenance activities regarding submarine-HM&E systems., • Assist NSWCPD with the development, preparation, assessment, and conduct or monitoring of proposed test procedures on U.S. Navy submarine propulsion, electrical, mechanical and information systems., • Analyze CASREPs, Maintenance and Material Management (3M), Detailed Feasibility Studies and other data to identify unfavorable technical (and associated cost) and/or reliability trends., • Providesupport for laboratory-scale testing and evaluation (T&E) and shipboard/land-based T&E efforts related to U.S. Navy submarine propulsion, electrical, mechanical, auxiliary and information systems., • Assist with NSWCPD HM&E commitment distribution and tracking., • Provide assistance tothe Submarine Propulsion Plant Engineering Activity (SUB PPEA)., • Perform other related duties as assigned. Required education and experience: • Bachelor’s degree in engineering from an accredited university or Maritime Academy., • Three (3) years of experience in Navy ship systems, including mechanical/electrical system design, repair, installation, modification, operation, maintenance and testing of Navy equipment or systems. Preferred education and experience: • 3 years of experience., • Navy and/or NAVSEA experience. Competencies: • Proficiency in Microsoft Office, specifically, Word, Excel, PowerPoint, and Outlook software., • Excellent verbal and written communication skills, as well as presentation skills., • Excellent organizational skills and attention to detail., • Excellent time management skills with a proven ability to meet deadlines., • Strong analytical and problem-solving skills., • Ability to prioritize tasks and to delegate when appropriate., • Thorough understanding of, or the ability to quickly learn about the project or product being developed., • High comfort level working with and around all military/organizational levels, clients, customers, suppliers, and visitors., • Must be highly reliable and demonstrate personal initiative to operate in a fast-paced environment with changing priorities. Additional eligibility requirements Work authorization/security clearance requirements: An active DoD Secret security clearance. Other Duties: Please note this job posting is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Supervisory Responsibility: None. Work Environment: This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, and photocopiers. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. Excellent listening skills are essential. The employee frequently is required to stand, walk, use hands to finger, handle or feel, and reach with hands and arms. Must be able to lift up to 20 lbs. Position Type/Expected Hours of Work: The typical workday is eight hours in length. Some flexibility in hours is allowed, with concurrence from the supervisor. Attendance at prescheduled mandatory meetings is required. Must be available during the core work hours as determined by your contract/location and must account for the required number of hours in a pay period to maintain Full-time status. Telework: • Situational telework may be allowed for this position subject to customer requirements/expectations. Travel: • Ability to travel CONUS; potential to travel OCONUS, • Travel up to10%may berequired. Benefits and Additional Compensation: KMS offers a competitive benefits packaging including medical, dental and vision insurances, flexible spending account, PTO, paid holidays, military leave, bereavement leave, 401k / retirement savings plan, professional development and tuition reimbursement, basic and voluntary life insurance / AD&D, short-term and long-term disability, voluntary AFLAC supplemental insurance products and employee assistance plan (EAP) program. Additionally, KMS offers employee referral bonuses and a discretionary annual bonus. AAP/EEO Statement: KMS Solutions provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. KMS Solutions is a drug free workplace. #LI-KMS #ZR

Job DescriptionSenior Lead Network Engineer IIEmployment Type: Full TimeDepartment: Information Technology CGS is seeking an experienced Senior Lead Network Engineer to join a team focused on the evaluation, enhancement, and maintenance of a large-scale network project that includes both wired and wireless network infrastructure and related hardware & software. The project's objectives are to evaluate the current setup of existing disparate networks and design & implement a network infrastructure that encompasses the wireless, wired, and software network requirements. The project will also include consultation regarding hardware and software necessary to facilitate the proper support for this encompassing infrastructure, and the associated systems testing, vulnerability assessments, and quality assurance needed to implement the new setup. This Network Engineer will interface with state and local governmental personnel, internal stakeholders, subject matter experts, and vendor(s) who will provide development services. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:- Operate and manage NPS network infrastructure;- Improve infrastructure monitoring and reporting capabilities based on the deployment of network management software;- Develop, maintain and deliver infrastructure documentation relating to the network infrastructure within the NPS environment;- Review current best practices and provide recommendations for architecture, design, management and operation of the network infrastructure;- Administration of the Cloudpath (or equivalent) onboarding process, monitoring and troubleshooting of wireless network health, maintenance of wireless network infrastructure, implementation of network security patches and software/firmware updates, from 0800 to 1700 PST, Monday-Friday;- Assess the NPS network infrastructure and make recommendations on improvement and optimization;- Define and conduct testing procedures for new infrastructure projects;- Implement technology solutions within the NPS network environment;- Provide design guidance on network solutions within NPS infrastructure projects;- Provide informal training and knowledge transfer to NPS resources on best practices and theory of operation relating to network products. Qualifications:- Bachelor’s Degree from an accredited college or university in Engineering, Computer Science, Business, Information systems or a related discipline.- Strong documentation skills including updating JIRA Tickets, Wiki Pages and Network Diagrams- Ability to communicate with end users, cross-organizational staff and technical assistance center.- CWNA Certification or equivalent- BCNE Certification or equivalent- Experience utilizing (RF) site survey tools such as Ekahau, RF Scanners and Wireshark packet capture software- Strong knowledge of layer 2 switching and layer 3 routing protocols; including VLANs, 802.1w, OSPF and VRRP- Strong knowledge of network security including; 802.1x, MAC Authentication, ACLs, RADIUS and Certificate of Authority (CA)- Strong knowledge of troubleshooting RF and LAN issues- Working knowledge of LINUX, MS Server 2013, VMware, etc.- A Master’s Degree in Engineering, Computer Science, Business, Information systems or a related discipline- At least 3 years experience with disaster recovery plan creation / implementation testing or projects - Experience with penetration testing, vulnerability assessment, and vulnerability testing- Experience with cyber threat information collection and analysis- Working knowledge of Agile/SCUM project management methodologies- Additional Industry certifications/licences Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work.Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation!Explore additional job opportunities with CGS on our Job Board: more information about CGS please visit: or contact:Email: #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Senior Electrical Designer - MA, PA (Hybrid) Who we are! Vanderweil Engineers is a nationally recognized, top-ranked engineering firm specializing in MEP/FP and technology services. For over 75 years, we've delivered innovative solutions across diverse sectors—including Science & Technology, Mission Critical, Academic, Healthcare, and Commercial. As one of the largest independently owned engineering firms in the U.S., our team of 500+ professionals operates from nine offices nationwide, bringing deep expertise and a commitment to excellence to every project. If you are looking for an opportunity to grow your career with some of the best minds in the industry, we are looking for you. We offer growth and stability in an ever-changing volatile environment. We are looking for a Senior Electrical Designer in our Power group. Our Power Department is leading the future of the energy and utility generation industry, focused on combined heat and power, alternative fuels like biogas and hydrogen, fuel cells, and battery storage, among many other cutting-edge technologies. Responsibilities include the following: • Produce drawings and design of electrical systems for heavy industrial projects such as cogeneration power plants, central heating and cooling plants, renewable energy systems and large chillers and boilers., • Must have general understanding of medium voltage and low voltage electrical distribution systems including switchgear, switchboards, motor control centers, panelboards, generators, and transformers., • Should be capable of designing switchgear, relaying & metering diagrams, lighting, raceways, grounding systems, and lightning protection systems., • Investigation and interpreting manufactures data, set up of model views and sheets using corporate standard., • Perform design calculations including feeder and branch circuit sizing, protective device sizing and voltage drop for review by the Engineer of Record., • Coordinate routing of cable, and miscellaneous components with other trades., • Assuring tasks are complete, accurate and in accordance with good engineering practice., • Review project files for compliance with standards and procedures., • Ability to interpret one-line diagrams, AC three-line diagrams and DC elementary diagrams., • Design and layout systems, create drawings and wiring plans for installation., • Should have experience with physical design of conduits and cable trays., • Validate designs and prepare customer presentation materials., • Use the companies’ internal database to plan personnel and scheduling needs. Essential Skills & Requirements: • Associate degree or equivalent from a vocational training program or technical school., • 5 plus years’ experience desired., • Revit certification extremely required or capable of learning., • Familiarity with NEC and NESC is essential, IEEE desirable., • Experience using BIM360 Cloud Collaboration platform is a plus., • Good oral and written communication skills, • Motivated and self-sufficient, strong computer skills and detail-oriented perspectives., • Ability to work individually or in a team setting with strong interpersonal, problem solving and analytical skills., • Customer service perspective with the ability to communicate effectively with staff and clients., • Knowledge of MS Office products including Word, Excel, Outlook. Our Flexible & Hybrid Work Culture We know that work/life integration is important to our employees. Our hybrid work style allows team members to have flexibility while building their skills through in-person exposure to industry experts. We prioritize wellness with programs that support physical and behavioral health, and we’re proud to foster an equitable and inclusive workplace. Learn more about our culture at . The total compensation that we expect to pay for this position is dependent on years of experience, licensure, education, geographic location, and project portfolio but expected to be in the $90,000.00 to $115,000.00 annually.

Job Description Wunderlich-Malec Engineering (WM) is a 100% employee-owned ESOP and one of the largest and most well-established engineering companies in the United States. When you join WM you become part of a company that is: • 100% employee-owned with 40+ years of industry history, • A Top 5 Systems Integrator Giant Major Responsibilities • This position requires the ability to deliver innovative automation solutions and design standards either self-directed or as a leader of a team. The candidate must have the ability to conceptualize, detail, and implement control systems for industrial processes and machinery that meet our customer’s requirements. This involves the development of a control system architecture, selecting the components to be used, detailing schematic diagrams and system documentation, programming controllers (PLC), programming the process visualization (HMI/SCADA), developing databases for archiving/displaying historical system data and implementing/commissioning the control system at the client’s facility. Knowledge of controller programming languages such as Ladder, Sequential Function Chart, Structured Text, and others to achieve the desired results is required. Also having knowledge of standard programming languages such as VBA, .NET, and SQL and Python for the development of HMI/SCADA systems is preferred, • For larger systems, experience with industrial networking used to connect control system components and instrumentation is preferred. The Controls Engineer would design, detail, and implement a variety of fiber, wired and wireless systems using industrial protocols (Ethernet/IP, Profinet, Modbus, etc.). Education Bachelor of Science degree in Electrical/Control Engineering, Mechanical Engineering, Chemical Engineering, or Computer Science or equal experience. Experience Greater than 5 years with capabilities in below areas is preferred: • In-depth understanding of PLC hardware/software platforms such as Rockwell Automation, Siemens, and Modicon, • In-depth understanding of SCADA software Inductive Automation Ignition, • Experience in industries such as Life Sciences, Building Automation, or Water Treatment, • Experience with AutoCAD is also desired, • Professional references, preferably one from each of the following: a subordinate, a peer, and a manager Working Environment Standard office environment, on-site office environment, diverse industrial environments, frequent use of a personal computer, facsimile/copy machines, and phones. *Job Descriptions are not exhaustive lists of all skills, responsibilities, or efforts associated with a job. They reflect principal job elements essential for performing the job and evaluating performance. Wunderlich-Malec is proud to offer a comprehensive employee-owner benefit package. Full-time employees may be eligible for the following benefits: Medical • Dental • Vision • Basic and Supplemental Life and AD&D • Long Term Disability • Voluntary Short Term Disability • Healthcare & Dependent Care Flexible Spending Accounts • Health Savings Account • Paid Time Off (PTO) • Paid Holidays • Tuition Reimbursement • Referral Bonus Program • 401(k)/Profit Sharing • 100% ESOP (Employee Stock Ownership Plan) • Employee Assistance Program • Will Preparation Resources • Worldwide Travel Assistance Salary Range The expected salary range is $100,000 - $125,000 depending on experience and qualifications plus a discretionary bonus and employee stock program. #LI-WM1 #LI-HYBRID

Job Description T&M Associates is seeking a multi-talented Principial Engineer to join our Water Market! This opportunity is available in any of our Pennsylvania offices with the flexibility of a hybrid work environment. We are looking for an experienced professional with 7+ years in planning, design, and construction administration of water process, treatment, and distribution projects. This individual will play a key role in managing and designing utility infrastructure projects, with a primary focus on providing project management and design support for linear water, sanitary sewer, and storm sewer improvements for the City of Philadelphia’s utility infrastructure replacement and upgrade program. Key Responsibilities • Lead and manage projects related to drinking water, wastewater, and stormwater systems., • Provide design support for linear water, sanitary sewer, and storm sewer infrastructure upgrades., • Oversee construction administration and ensure compliance with project requirements., • Prepare technical reports, studies, and project documentation., • Track and manage financial performance of assigned projects., • Coordinate workload and provide mentorship to junior staff., • Bachelor’s Degree in Civil Engineering required., • 7+ years of related experience in water process, treatment, and/or utility infrastructure projects., • Professional Engineer (PE) license strongly preferred, • At least 2 years of project management experience strongly preferred., • Proficiency in AutoCAD and Civil 3D required., • Experience with MS Office and MS Project (MS Access a plus). T&M Associates offers a competitive and comprehensive benefits package designed to support the health, well-being, and professional growth of our employees. Benefits include comprehensive insurance (medical, dental and vision), a 401(k) with company match, paid time off, flexible work schedules, wellness programs, and professional development opportunities — all within a people-first, award-winning hybrid work environment. See more details about benefits here. If this sounds like a company you want to be part of then apply now! New Hires must have documents indicating they are eligible to work in the United States. EEO/AA Employer. For California based applicants, our CCPA-CRPA Privacy Notice can be found on our Careers page at #LI-HYBRID

Job Description T&M Associates is seeking a motivated Staff Engineer I to join our growing Water Market team in Philadelphia, Pa. This is an excellent opportunity for a recent graduate or early-career engineer to gain hands-on experience while working alongside experienced professionals in a collaborative consulting environment. In this role, you will support a variety of municipal water and wastewater projects, including treatment facilities, pumping stations, sewer system extensions, and waterline improvements. You will assist with WWTP upgrades, design development, permitting, and construction phase services for municipal clients. Key Responsibilities • Assist with the design of water and wastewater treatment projects., • Support preparation of plans, calculations, reports, and construction documents., • Participate in permitting and regulatory coordination., • Conduct field visits, inspections, and data collection., • Bachelor’s Degree in Civil Engineering or related field., • 0–3 years of experience (internship or co-op experience preferred)., • EIT certification or ability to obtain within 12 months., • Familiarity with AutoCAD and/or Civil 3D preferred., • Strong communication, organizational, and problem-solving skills. T&M Associates offers a competitive and comprehensive benefits package designed to support the health, well-being, and professional growth of our employees. Benefits include comprehensive insurance (medical, dental and vision), a 401(k) with company match, paid time off, flexible work schedules, wellness programs, and professional development opportunities — all within a people-first, award-winning hybrid work environment. See more details about benefits here. If this sounds like a company you want to be part of then apply now! New Hires must have documents indicating they are eligible to work in the United States. EEO/AA Employer. For California based applicants, our CCPA-CRPA Privacy Notice can be found on our Careers page at #LI-HYBRID

Job DescriptionDiscover Veranova: At Veranova, we believe people are our most important asset, and we are dedicated to building the most talented workforce in our industry. Our commitment to uncompromising focus on quality, compliance, safety, and excellence in delivery shapes everything we do. We are not just looking for skills; we are seeking innovative individuals who have a mindset open to learning and growth, and a desire to make a difference. Veranova is a global leader in the development and manufacturing of complex active pharmaceutical ingredients (APIs) for pharma and biotech customers. With deep technical expertise and impressive flexibility, we develop solutions and processes that support and accelerate innovation. Join us on our mission to enable current and next-generation therapeutics to improve and save the lives of patients. Every role at Veranova plays a part in delivering an exceptional customer experience through ownership and integrity. Role Overview: The Senior Principal Engineer is a technical leadership role responsible for overseeing engineering activities related to the development, validation, and lifecycle management of Active Pharmaceutical Ingredient (API) manufacturing processes. This role requires deep expertise in pharmaceutical engineering, regulatory compliance, and cross-functional collaboration. The individual may lead and mentor a team of engineers while driving continuous improvement, ensuring product quality, and supporting business objectives. Core Responsibilities: Technical Leadership & Engineering Oversight • Lead and provide strategic direction for engineering activities supporting API manufacturing processes., • Mentor and manage a team of engineers, fostering technical growth and high performance., • Design, execute, and review process validation protocols and reports for API manufacturing., • Ensure validation activities comply with regulatory requirements and internal quality standards., • Lead and contribute to Annual Product Review activities, ensuring comprehensive evaluation of process performance and product quality., • Provide engineering support for new product introductions, including process scale-up, technology transfer, and commercialization., • Work closely with Contract Development and Manufacturing Organizations (CDMOs) for process transfer, validation, and ongoing production support., • Lead or support investigations related to client complaints, deviations, and non-conformances., • Develop and maintain process monitoring strategies to ensure consistent product quality and process performance., • Serve as a key representative during regulatory inspections and audits., • Ensure engineering systems and documentation comply with cGMP and global regulatory requirements., • Lead and manage cross-functional engineering projects, ensuring delivery on time and within budget., • Develop project plans, allocate resources, and track progress against milestones., • Bachelor’s degree in Chemical Engineering (required), • Master’s degree in Chemical Engineering or related field (preferred), • Minimum of 10+ years of experience in the pharmaceutical or biopharmaceutical industry, with a strong focus on API manufacturing., • Proven experience in process validation, regulatory compliance, and engineering leadership., • Experience working with CDMOs and external partners., • In-depth knowledge of cGMP regulations and industry standards., • Strong understanding of process validation, process design, and scale-up., • Experience with process monitoring tools and statistical analysis., • Demonstrated leadership and team management experience., • PMP or equivalent project management certification (preferred)., • Familiarity with continuous improvement methodologies (Lean, Six Sigma). Salary Range: $120,000-$130,000 annual base salary. The salary range for this role is $120,000-$130,000. This range represents a good-faith estimate of the compensation we expect to offer for this position at the time of posting. Actual compensation will be based on factors such as relevant experience, skills, qualifications, and internal equity. In exceptional cases, compensation may exceed the stated range. All full-time employees are eligible to participate in our annual incentive bonus program. Bonus targets vary by career level and are based on individual and company performance. Our Commitment: · Health & Wellness: Comprehensive health & wellness benefits. Access to mental health resources and wellness programs. Generous PTO and holiday pay policies. · Financial Wellness: Veranova is committed to fair and transparent compensation practices. This includes a competitive base salary, eligibility for performance-based bonuses, and an attractive 401(k) Plan with company match. Salary ranges reflect the scope and expectations of the role, and are based on market data, internal equity, and role-specific factors. Final compensation may vary depending on experience, skills, education, and business needs. · Professional Development: Opportunities for continuous learning through LinkedIn Learning, workshops, conferences, and mentorship. Tuition Assistance for Undergraduate and Graduate degree programs. · Inclusive Culture: At Veranova, an inclusive culture is integral to our values. We welcome people with diverse experiences and perspectives who share our mission to improve and save lives. Even if you don’t meet every qualification, we encourage you to apply. Veterans, first responders, and those transitioning from military to civilian life bring valuable skills that strengthen our team. Additional Information: Applicants for this role must be authorized to work in the United States without further employer sponsorship. Agency and Search Firm Representatives: Veranova does not accept unsolicited resumes from agencies and/or search firms for this job posting. Important Notice Regarding Recruitment Scams: Veranova is committed to providing a professional and secure recruitment experience for all applicants. Unfortunately, fraudulent job postings and recruitment scams are becoming more prevalent. We want to ensure that all candidates are aware of potential scams. Please see our notice here. • Legitimate communications from Veranova will only come from official email addresses using our domain: @veranova.com., • Legitimate LinkedIn communications will only come from active Veranova employees., • Veranova will never ask candidates for sensitive personal information during the application process (e.g., bank account details or social security number). All your information will be kept confidential according to EEO guidelines. Veranova is an Equal Opportunity Employer. It is the policy of Veranova to provide equal employment access and opportunity to all persons regardless of age, race, color, national origin, religion, sex, sexual orientation, gender identity and/or expression, physical or mental disability, genetic information, citizenship, marital status, veteran status, or any other characteristic protected by federal, state, or local law. All applications are carefully considered, and your details will be stored on our secure Application Management System. This is used throughout Veranova for the selection of suitable candidates for our vacancies as they arise. Veranova respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice.

Job DescriptionSenior Veritas Enterprise Vault Engineer Employment Type: Full-Time, Executive-LevelDepartment: Legal CGS is seeking a dedicated Senior Veritas Enterprise Vault Engineer to join a fast-paced and hard-working team to assist with any legal accounts. As a Veritas Enterprise Vault Engineer, you will play a key role in supporting various aspects of the company's portfolio. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:The Enterprise Vault is hosted on physical and virtualized Windows Servers and therefore requires the Contractor to provide a wide range of support tasks including but not limited to: - Contractor shall participate in teleconferences or technical meetings to review, educate, and support program objectives; - Contractor shall perform configurations, maintenance, monitoring, and troubleshooting using current engineering documentation; - Contractor shall record configurations change requests through the established change control board; - Contractor shall process storage requests, migrations and decommission tasks; - Contractor shall monitor failed system components and coordinate logistics, vendor support, and site support as needed; - Contractor shall respond to monitoring alerts and warnings with prompt corrective actions and escalations; - Contractor shall complete all scheduled maintenance in accordance with established policies and procedures; - Contractor shall prevent data loss or storage system outages by exercising a high level of attention to detail during maintenance; - Contractor shall manage technology in remote environments; - Contractor shall review and process tickets related to supported system according to the established service level agreements tracked within the service manager database; - Contractor shall provide initial response, Level 1 and Level 2 escalation for outages; - Contractor shall schedule maintenance actions in a timely manner; - Contractor shall create Power Shell and VBS scripts as needed to automate routine maintenance tasks; - Contractor shall facilitate the migration of system into cloud infrastructure; - Contractor shall perform daily system monitoring, verifying the integrity and availability of all hardware, server resources, and systems; - Contractor shall review system and application logs to verify completion of scheduled jobs such as backups; - Contractor shall apply OS patches and upgrades on a regular basis; upgrade administrative tools and utilities; upgrade end user applications; - Contractor shall configure / add new services as necessary; - Contractor shall research and recommend innovative, and where possible automated approaches for system administration tasks; - Contractor shall prepare and review technical assessments to include required tasks, estimated time frames, and effort for any scope project; - Contractor shall provide before/ or after core hour work as required. Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work.Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation!Explore additional job opportunities with CGS on our Job Board: more information about CGS please visit: or contact:Phone: +1 (888) 680-5916Email: #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionCompany Description Our ELPRO Division has supported the pharma, biotech, and healthcare industries with intelligent monitoring solutions—ensuring compliance, visibility, and safety from production to patient. ELPRO has been a trusted partner in compliant environmental monitoring. We’re committed to supporting your entire pharmaceutical supply chain—from production and storage to transport and delivery to the end user. With in-house developed hardware and software, GxP-compliant consulting, and global support services, we ensure data integrity, compliance, and peace of mind—every step of the way. Job Description ELPRO is seeking a dynamic and strategic professional to serve as a Project Manager & Technical Sales Engineer, driving real-time cold chain monitoring opportunities and applications. This individual will be responsible for managing projects, responding to RFIs and RFPs, becoming proficient in ELPRO’s software solutions, and directly contributing to sales efforts in North America. The ideal candidate will bridge technical expertise with commercial acumen to support clients and internal teams in delivering tailored monitoring solutions. Qualifications • Bachelor’s degree in supply chain management, engineering, business, or a related field (or equivalent experience)., • Proven experience in project management, technical sales, or consulting within a cold chain monitoring, logistics, or life sciences environment., • Strong understanding of RFIs, RFPs, and technical solution selling., • Excellent communication and presentation skills, with the ability to translate technical concepts into strategic business value., • Ability to manage multiple projects simultaneously and coordinate cross-functional teams. Additional Information Key Responsibilities Project Management: • Oversee end-to-end implementation of real-time cold chain monitoring solutions, ensuring projects are delivered on time and within scope., • Coordinate cross-functional teams, including engineering, sales, and client stakeholders, to align objectives and execution., • Define and track project KPIs, ensuring continuous optimization and improvement., • Manage project implementation and delivery,, • Serve as the internal product & technical expert,, • Enable our sales teams to present and demo ELPRO’s real time monitoring solutions,, • Collaborate with cross functional teams to ensure successful deployments., • Deliver product demonstrations, proof‑of‑concepts, and technical workshops (virtual and in‑person), • Translate customer requirements into technical solutions, proposals, and project scopes, • Assist Sales in crafting customized solutions and pricing models Technical Sales & Business Development: • Support sales initiatives by identifying customer needs and mapping them to ELPRO’s technical capabilities., • Assist in the preparation and submission of RFIs and RFPs, ensuring strategic alignment with customer expectations., • Conduct product demonstrations and technical presentations to prospects and existing clients., • Collaborate with sales teams to provide training on ELPRO’s software solutions for real-time cold chain monitoring., • Develop a deep understanding of ELPRO’s software platforms, ensuring the ability to advise customers on system integration, usability, and performance., • Assist customers in troubleshooting and optimizing solutions for their specific cold chain monitoring needs., • Stay ahead of industry trends and emerging technologies that may impact ELPRO’s monitoring solutions. All your information will be kept confidential according to EEO guidelines.

Job Description Primary Responsibilities • Provide leadership and mentorship to software engineering team members, fostering a collaborative environment committed to production excellence and continuous product improvement., • Evaluate programming and application development requests, applying technical expertise to determine feasibility and identify opportunities to enhance existing systems and capabilities., • Lead the planning, development, documentation, testing, and deployment of business-critical applications and enhancements., • Collaborate with business stakeholders to clarify operational procedures and program objectives., • Utilize structured analysis and design techniques to create application specifications, including flowcharts and diagrams documenting logical operations., • Share application and domain knowledge with other teams, supporting cross-functional understanding between application and infrastructure groups., • Provide production support, including monitoring and issue resolution as needed., • Oversee integrations between internal systems and external platforms, including marketing technology, CRM solutions, and third-party SaaS providers., • Migrate legacy middleware workflows to secure, modern cloud-based architectures., • Build and maintain cloud resources using AWS services (such as EC2, S3, Lambda, RDS, VPC, IAM, CloudFormation/CDK)., • Implement CI/CD pipelines for automated build, test, and deployment using industry-standard tools (e.g., GitHub Actions)., • Modify code to correct errors and enhance functionality., • Analyze programs to improve operational efficiency or adapt to evolving business needs., • Create and maintain comprehensive documentation detailing application logic, development processes, and modifications., • Perform business analysis and assist in facilitating user training. Qualifications • Bachelor’s degree in Computer Science, related field, or equivalent experience., • Minimum of 4–6 years of professional software engineering experience., • Proven ability to work independently as a self-starter; able to take initiative and deliver solutions aligned with business needs using a logical and structured approach., • Technical experience supporting the development and maintenance of business applications., • Strong project management and leadership abilities, including guiding and mentoring junior team members., • Excellent organizational, verbal, written, and presentation skills., • Proficiency with scripting languages such as Bash and Powershell., • Experience and strong understanding of both SQL databases (PostgreSQL, MySQL, SQL Server) and NoSQL platforms (MongoDB, DynamoDB, Redis)., • Familiarity with customer data platforms, ETL/ELT pipelines, or event-driven application architectures., • Hands-on experience with cloud computing services, particularly AWS (including EC2, S3, Lambda, RDS, VPC, IAM, CloudFormation/CDK)., • Demonstrated ability to build and maintain APIs using modern programming languages and frameworks (REST APIs, Java and Spring)., • Working knowledge of GraphQL, SOAP/XML, Webhooks, and authentication protocols such as OAuth2, JWT, API keys, Basic Auth, and SAML., • Familiarity with standard data formats, including JSON, XML, CSV, and flat files., • Understanding of tools such as Postman, Swagger/OpenAPI, and Python frameworks (Flask, FastAPI, Django REST)., • AWS Certified Developer or AWS Certified DevOps Engineer preferred.

Job Description POSITION SUMMARY The Transportation Design Lead is ideally a professional with 15+ years of increasing responsibility managing people, building teams and a transportation practice. This role is primarily leadership and management of people along with business development in support of generating long-term transportation projects. This individual will provide client management, project management, and quality management of transportation engineering services on all phases of multiple assigned projects in support of the Department Manager. They will also be responsible for internal team growth and development, supporting the individual’s professional development to meet the needs of the team; encouraging industry participation, volunteerism. Office Location: Cherry Hill, NJ PRIMARY DUTIES • Plan, develop, and manage infrastructure & transportation engineering projects for Agency clients, • Support the Department Manager in job planning and coordination of multiple technical disciplines., • Perform analysis of existing conditions and provide oversight to technical staff and clients representative engineer/project manager., • Develop job plans and monitor schedules and budgets., • Maintain strong technical knowledge of design techniques, procedures, regulations, materials and specifications., • Perform independent, complex engineering calculations and develop construction plans., • Ensure client and corporate quality control procedures are followed throughout a project., • Coordinate with a team in order to prepare technical reports and construction drawings., • Responsible for quality assurance and quality control on all projects across TDS, • Assist with new business development activities, including proposal preparation and participation in sales presentations., • Lead competitive proposal pursuits in coordination with marketing group, • Interact with clients and oversee subconsultants., • Review of monthly project invoices prior to submission to clients., • Provide technical direction and mentor engineering team., • Perform site visits during construction phase for client support. KNOWLEDGE, SKILLS and ABILITIES • Proven leadership track record, • Experience in the Management of Heavy Transportation projects., • Experience on NJDOT, NJTA, PANYNJ, PennDOT, PTC and City of Philadelphia projects preferred., • Knowledge of various DEP & stormwater regulations, • Excellent communication skills., • Proficiency with Microsoft Office software., • Strong knowledge of NJDOT, PennDOT, AASHTO bridge design manuals and procedures EDUCATION/EXPERIENCE • Bachelors of Science Degree in Civil Engineering from an accredited four-year college or university, • Masters Degree in any related field from an accredited university CERTIFICATIONS/LICENSES REQUIRED • Professional Engineer (PE) License Required, New Jersey or Pennsylvania with the ability for multiple reciprocal states, • Project Management Professional (PMP) Certification preferred SUPERVISORY EXPERIENCE: • Demonstrated experience supervising and mentoring staff required. PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee occasionally works in the field and may be exposed to outside weather conditions. Work requires frequent and prolonged computer use. May occasionally be lifting up to 25 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary. TOTAL REWARDS: The annual base salary range for this full-time position in the United States is $110,000 - $200,000. This range represents a good faith estimate and is based on factors such as the role, level, and geographic location. The range shown reflects the minimum and maximum target salaries for this position across all U.S. locations. Within this range, individual compensation will be determined based on job-related factors including skills, experience, education, and training. In addition to base salary, Remington & Vernick Engineers offers a comprehensive and competitive benefits package. Benefits include: • Medical, dental, and vision insurance, • Short-term and long-term disability insurance, • Life insurance, • 401(k) retirement plan, • Paid holidays and paid time off (PTO), • 12 weeks of paid parental leave for birthing parents, • Supplemental bonding leave for non-birthing parents in states that do not offer a paid family leave program, • Wellness program, • Tuition reimbursement, • Support for professional development and credentialing At Remington & Vernick Engineers, our compensation and benefits philosophy reflects our core values - Drive, Integrity, Initiative, Respect, and Service. We celebrate achievement, encourage personal and professional growth, and believe that enjoying your work and building strong relationships with your team and clients are key to long-term success. We foster a high-performance environment that thrives on camaraderie, collaboration, and shared wins.

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Competitive salary, • Dental insurance, • Flexible schedule, • Health insurance, • Paid time off, • Parental leave, • Profit sharing, • Vision insurance HETI has a great opportunity for a Senior Geologist/Senior Environmental Scientist/Senior Engineer with 10+ years experience in the environmental field. This role will be responsible for providing technical and business skills and contribute to advanced solutions in the environmental, chemical, commercial, manufacturing, government, energy, financial, insurance, and/or legal sectors. This job is 100% remote. The candidate should have experience managing consulting assignments, must work effectively in multi-disciplinary teams, is expected to be proficient in the analysis and communication of information, and must be able to work cooperatively with agencies, organizations, and individuals to guide decision-making. The successful candidate is also expected to be proficient in all facets of project management. He/she must demonstrate collaboration with colleagues throughout the organization. Key Responsibilities include but are not limited to: Client Management & Communication: • Serve as the primary point of contact for clients and stakeholders, providing regular updates on project status and outcomes., • Collaborate with project teams, including environmental engineers, geologists, and technicians., • Interact and coordinate with regulatory agencies to obtain necessary approvals, permits, and closure documentation., • Prepare and submit comprehensive reports, including site investigation reports, risk assessment reports, remedial action plans, progress reports, and closure reports., • Develop and implement effective remediation plans based on the findings of site investigations and risk assessments., • Design and oversee the implementation of remediation strategies, which may include excavation, soil vapor extraction, groundwater treatment, in-situ bioremediation, or other appropriate methods., • Ensure compliance with all applicable regulations, guidelines, and permits during the remediation process.Insurance Claim Support, • Experience providing technical support to insurance claims professionals for environmental or energy related claims., • Understanding of insurance terminology and policy language., • Experience in assessing the source and timing of pollution events., • Diverse environmental consulting experience., • Excellent technical writing skills.Site Assessments:, • Manage/conduct comprehensive site investigations to identify potential sources of contamination, evaluate risks, and develop appropriate remediation strategies., • Collect soil, groundwater, and other environmental samples and analyze them in accordance with standard protocols and regulations., • Perform data interpretation, risk assessment, and modeling to determine the extent and nature of contamination and its potential impact on human health and the environment.Quality Control:, • Implement quality control and assurance measures to ensure accurate and reliable data collection, analysis, and reporting., • Conduct periodic audits and reviews of project activities to verify compliance with project plans and regulations., • Current PE or PG license, • Bachelors Degree in environmental science, geology, engineering, or a related field., • 10+ years experience conducting site investigations remediation and third party evaluations, • Solid understanding of environmental regulations, guidelines, and best practices related to contaminated site cleanup., • Excellent project management skills, including the ability to prioritize tasks, meet deadlines, and manage multiple projects simultaneously., • Strong communication and interpersonal skills, with the ability to collaborate effectively with clients, regulatory agencies, and project teams., • Attention to detail, critical thinking, and problem-solving abilities., • Knowledge of environmental sampling techniques and laboratory analysis methods. Founded in 1986, HETI is a full-service, nationwide environmental services company specializing in environmental and indoor air quality site assessment, site remediation, risk characterization, occupational health and safety services, and litigation/expert witness support. Through our network of offices throughout the U.S., we serve a variety of large and small businesses. We are an Equal Opportunity Employer and offer a competitive benefit package including base salary plus bonus opportunities and a friendly, flexible work environment. Flexible work from home options available.

Job Description At Whitman, Requardt & Associates, LLP, we are "People Focused and Project Driven". We have been in business for 110 years and we are known for our quality work and quality employees. This is your chance to join our team - help us to design the infrastructure and buildings that improve the world! We are currently seeking a Senior Traffic Engineer to join the Traffic Engineering Group in our office in Philadelphia, PA. Assignments may include work with our traffic engineering analysis or design teams. The traffic engineering analysis teams perform operational analyses, identify and develop creative technical solutions, and prepare technical reports and presentations. The traffic engineering design teams prepare contract documents for traffic signals, signing, markings, maintenance of traffic, and ITS devices. Responsibilities: Our Traffic Department works on projects within the mid-Atlantic region (PA, MD, DE, VA) as well as nationally. Our traffic work is challenging, interesting, and in many cases, on the leading edge of traffic engineering applications in the industry. Our senior traffic engineers are responsible for the design and management of projects that involve traffic signals, signing, markings, roadway/parking lot lighting, work zone traffic control, and ITS devices; conduct traffic safety/operations studies; and develop or apply Synchro, SimTraffic, VISSIM, and VISUM models. Project assignments can range from small-scale intersection improvements to complex interchange and corridor projects, as well as innovative multimodal transportation plans and parking studies. Additional responsibilities include quality control reviews; marketing and business development; and staff mentoring and development. Position may include working at client site(s). Requirements: • Bachelor of Science degree in Civil Engineering required, • A minimum of 16 years of progressive experience in traffic engineering, • Basic understanding of traffic modeling (macro, meso and micro), • Experience with VISSIM, VISUM, HCS, Synchro/SimTraffic, CORSIM and Quickzone, • Experience in the design of traffic control devices including signals, signing, maintenance of traffic, pavement markings, ITS devices, and lighting, • Familiarity with AASHTO, MUTCD, Highway Capacity Manual and Highway Safety Manual, • Licensed as a Registered Professional Engineer in Pennsylvania or the ability to obtain through comity from another state, • PTOE certification preferred, • Experience working on PennDOT projects required, • Experience working with MicroStation and/or AutoCAD., • Knowledge of Microsoft Office (Word, Excel, Outlook)., • Exceptional communication, technical writing and organizational skills. WRA recognizes that employees play an important role in its success. Our commitment to full-time employees is reflected in the comprehensive benefits package we offer: • Flexible work schedule options, • Competitive salary, • Leave accrual and paid holidays, • Healthcare benefits, • Group Life Insurance, as well as additional optional life Insurance, short and long term disability insurance, • Flexible spending accounts for medical and dependent care reimbursement, • 401(k) Retirement Plan, • Tuition Reimbursement, • Employee Assistance Program Applicants must be currently authorized to work in the United States on a full-time basis without the need for employment-based visa sponsorship now or in the future. WRA will not sponsor applicants for U.S. work visa status for this opportunity. (no sponsorship is available for H-1B, L-1, TN, O-1, E-3, H-1B1, F-1, J-1, OPT, CPT or any other employment-based visa) * Not accepting resumes from 3rd party recruiters for this position * Req. #2884 #LI – Onsite #LI – Senior Level

Job DescriptionJob Title: Machine Learning Engineer Job at a Glance: This role is for an experienced ML Engineer who has built, trained, and deployed real-world machine learning models from scratch. You thrive on turning data into working solutions and have extensive hands-on experience with end-to-end ML pipelines. Location: 1800 Arch Street Philadelphia Pennsylvania 19103 Work Schedule: 4 days onsite, 1 day remote Pay Rate: $80-$85/hr W2 + optional benefits (Medical, Dental, Vision, and 401k) Duration of Contract: Long term contract with extension/conversion possibility Responsibilities: • Design, build, train, and deploy end-to-end machine learning models for real-world use cases., • Own the full ML pipeline: data collection, cleaning, preprocessing, feature engineering, model selection, training, validation, and deployment., • Implement models using scikit-learn and related Python ML libraries., • Conduct experiments and hyperparameter tuning to optimize model performance and robustness., • Apply appropriate model evaluation techniques (e.g., cross-validation, A/B testing, performance metrics) and communicate trade-offs., • Collaborate with data engineers, product managers, and other stakeholders to translate business problems into ML solutions., • Explain complex ML concepts and model behavior in clear, non-technical language to stakeholders and partners., • Monitor model performance in production and iterate to improve accuracy, reliability, and scalability., • Document your work, including data assumptions, model decisions, and validation results.Required Skills:, • Proven track record of building and shipping production machine learning models., • Strong hands-on experience with Python and scikit-learn., • Deep understanding of core ML fundamentals.Company Culture:, • From your first day, you’ll have the support and resources needed to grow your career to new heights and direction., • Get ready to impact the lives of millions as you work together to create amazing experiences and breakthrough products at an exciting pace.As a trusted technology partner, CEI delivers solutions that help our customers transform their business and achieve meaningful results. From strategy and custom application development through application management - our technology and digital experience services are tailored to meet each unique need of our customers. Our staffing solutions bring specialized skills to complement our customers' workforce and project requirements. #INDGEN #ZR

Job Description About Mishimoto Mishimoto is the flagship brand of Resource Intl., the world leader in performance cooling products, and was created for automotive enthusiasts by automotive enthusiasts. Established in 2005, we have two decades of experience in working toward our goal of providing superior cooling system upgrades. Mishimoto has produced a line of upgrades to fit nearly any application, including sport compacts, powersports, trucks, Jeeps, muscle vehicles, daily drivers, and the classics. Mishimoto's corporate headquarters is located in a 67,610 sq. ft. office, warehousing facility, and state-of-the-art engineering studio, where we have assembled the industry's cutting-edge tools for evaluating Mishimoto test vehicles in Garnet Valley, PA. This one-of-a-kind facility allows us to maintain a leading position in our industry, with another office in Sparks, Nevada, as well as international locations in Stourbridge, UK, and Yangzhou City, China. We have built an unprecedented global infrastructure for the benefit of all our worldwide customers. Benefits and Perks Our employees love our workplace because: • It's a gearhead's dream – Design and develop performance automotive products for the car scene., • We make way for play – Attend Wine and Cheese gatherings and hit up our favorite events, from drift to autocross to classic car shows., • We take a breather – Enjoy an in-house gym, massage chair, and healthy snack vending machine., • Our workplace is beautiful – Work in an office designed to stimulate creative thinking., • The employee discounts rock – Get exclusive access to Mishimoto products and discounts from our partners., • The bennies – Medical, dental, vision, paid time off, 401(k) w/ 4% match, disability pay, and life insurance., • We score – bonus program is tied to overall company performance goals. What You'll Do: • Design and prototype of new aftermarket automotive parts using CAD software (e.g., SolidWorks)., • Perform product testing and validation activities (performance, durability, and fitment)., • Participate in design review and the engineering change process., • Create detailed Engineering Reports to describe test procedures and results both within the company and externally to customers., • Perform, document, and participate in consumer marketing content creation for the removal and installation of automotive components and systems., • Participate in supplier evaluations, quality inspection, and corrective actions., • Collaborate with the engineering team to support continuous improvement of our engineering and design processes. Better-designed products are a result of you and the team brainstorming ideas and then implementing the changes., • B.S. in Mechanical Engineering from an ABET-accredited university, or related degree., • 1 to 3 years of experience in Original Equipment Manufacturing, auto manufacturing, heat exchange, engine cooling, or air intake development., • Basic knowledge of 3D-modeling software, 3D scanning, 3D printing, and their application to the design process., • Basic knowledge in GD&T and 2D drawing creation., • Basic knowledge of automotive components and systems., • Understanding of fluid dynamics and thermodynamics., • Understanding of manufacturing and quality control processes, material selection, and assembly methods., • Hands-on experience working on vehicles., • Hands-on experience with sheet metal fabrication tools., • Timeliness and attention to detail are critical., • Electromechanical design experience building custom machinery or test rigs., • Bonus points for having a personal passion for auto products and the industry. You'll be able to take your consumer mindset and put it to work. Nobody knows what a car enthusiast wants in a product better than a car enthusiast., • Teamwork & Collaboration - you know your stuff, and you can engage with your colleagues in a positive, productive way., • Innovative - Capable of coming up with unique ideas and solutions to design new products., • Problem-Solving - Ability to break down complex problems, think critically, and devise creative solutions. Manufacturing issues happen. Your keen insight and troubleshooting will help Project Managers and Suppliers during the production process., • Communication - Excellent written and verbal communication skills to articulate technical concepts to both technical and non-technical stakeholders., • Adaptability - Willingness to learn and adapt to new technologies, industry trends, and evolving user needs., • Creating data analysis reports triggers the "engineering nerd" in you., • You have an eye for cleanliness and organization (We keep a clean shop)., • You are eager to assist in the presentation of product discussions for social media video clips and installation videos. You're proud of your work, and you want to be able to share it with others., • You approach product development with an uncompromising commitment to industry standards and OEM compatibility. Your goal is to deliver aftermarket parts that integrate seamlessly while offering real improvements., • You believe in getting your hands dirty and spending time with actual vehicles and parts — not just CAD files — to ensure that what we engineer works in the real world, not just on paper., • Role is on-site at Mishimoto's Garnet Valley, PA facility., • Requires flexibility, including hours availability to work outside a Monday–Friday 8:30 – 5:00 pm schedule as needed., • Must be comfortable being on camera for product marketing content (less than 5%)., • Must be able to lift 50 lb., • Must be capable of standing, maneuvering, and working on vehicles for up to 8 hours per day., • Must be comfortable working in a garage and machine shop environment (Points will not be deducted for fingernail grease on interview day!)., • Light travel (less than 10%) may be required., • Valid driver's license

Job Description About us! Vanderweil Engineers is a top-ranked national engineering firm specializing in Power, MEP/FP and technology systems for a wide range of market sectors. In our 75th year in operation with a staff of 500+ located across nine offices, we are proud to be one of the leading independently owned engineering firms in the country. If you are looking for an opportunity to break away from your silo to grow your career while working on high profile projects, we are looking for you. Take a leadership role and help shape the future of our growing Power Delivery Group. Join us to do the best work of your career as a Lead Substation Structural Engineer with our growing Power Group team at our headquarters in Boston, MA (Seaport District) or New York, NY, or Philadelphia, PA (hybrid schedule). What You will Achieve: With our continued growth in the Transmission & Distribution sector, we are seeking a Lead Substation Structural Engineer. Work on critical infrastructure projects and contribute to the structural integrity of high-voltage substations nationwide. Our Power Group provides full-service engineering and design solutions for utility, institutional, and commercial clients across the U.S., with a strong focus on reliability, sustainability, and innovation. We offer clear paths for professional growth, leadership development, and the opportunity to directly impact our success as we expand into new markets and technologies. Some of your responsibilities include the following: • Lead the structural engineering and design of both transmission and distribution substations, including new builds, expansions, and retrofits., • Perform and review structural analysis and design using software such as RISA-3D, STAAD.Pro, L-Pile, RAM Structural System, CSI SAFE, or MathCAD., • Develop and oversee the production of structural construction documents, including detailed specifications, plans, and calculations for steel, concrete, and foundation systems., • Evaluate existing structures for loading capacity, retrofit needs, and compliance with current codes., • Coordinate with geotechnical teams for interpretation and application of soil data into foundation design., • Support and lead field investigations, constructability reviews, and site assessments., • Review and approve delegated design work from subconsultants or junior engineers, ensuring compliance with engineering best practices and project requirements., • Mentor and provide technical leadership to junior engineers, designers, and drafters. Essential Skills & Requirements: • 8+ years of structural engineering experience,, • 5+ years in substation structural design for transmission and/or distribution facilities., • Bachelor’s degree in Civil Engineering, • PE license, • Designing and analyzing steel structures, equipment foundations, site civil systems for substations., • Proficient with structural software like STAAD.Pro, RISA-3D, RAM Structural System, L-Pile, CSI SAFE, MFAD, or MathCAD. Our Flexible & Hybrid Work Culture: We know that work/life integration is important to our employees. Our hybrid work style (up to 2 days remote per week) allows team members to have flexibility while building their skills through in-person exposure to industry experts. Our wellness programs prioritize our team members’ physical and behavioral health. We are an equal opportunity employer committed to diversity in the workplace. This position has a salary range of $110,000 to $160,000 and is commensurate on years of experience, licensure, skill sets, location, and education. Reach out to us to discuss total rewards and compensation package.