Trabajos pump en Dallas, TexasCrear alertas

SEASONAL RATE AND COMPLETION BONUSES OFFERED!! See below. Join Baylor University Medical Center as a Registered Nurse and be part of something better! ECMO ICU Opportunities The ECMO ICU is looking for experienced ICU RN’s who strive to deliver the highest quality care for our ECMO population. Come join our ELSO Platinum Center of Excellence program! The ECMO ICU RN is competent in all mechanical circulatory devices including percutaneous and implantable ventricular assist devices, intra-aortic balloon pumps, continuous renal replacement therapy and ECMO. Our team is dedicated, efficient, inspiring and committed to providing the most elite extracorporeal care available in the world. ECMO ICU Patient Population: All ECLS patients receiving VA, VV, VP, VA-V, RVAD and ECPR therapies. Disease processes including but not limited to postcardiotomy syndrome, cardiogenic shock, advanced heart failure, pre and post heart/lung transplant, ARDS, and post cardiac arrest. Patient Ratios: 1:1 RN to ECMO patient ratio alongside an ECMO Specialist to pump ratio 1:3 Department Specifics: 10 dedicated ECMO beds located inside CTTICU, dedicated ICU physicians and ACNP coverage 24/7, 100% certification rate (CCRN, CSC), multiple research trials and publications, and 1 of 2 NTX ECMO programs with ECMO Specialist RN led transport teams. Baylor University Medical Center (Baylor Dallas), part of Baylor Scott & White Health, is a major patient care, teaching and research center located in Dallas, Texas. Established in 1903, the hospital opened with 25 beds and has grown to 914 licensed beds, cares for more than 300,000 people each year and serves as the North Texas flagship hospital of Baylor Scott & White Health. We are home to more than 20 medical specialty centers, many of which are ranked among the top 50 programs in the United States. Baylor Dallas is honored to be recognized by U.S. New & World Report “Best Hospitals” for 29 consecutive years, with similar designations from Newsweek and Becker’s Healthcare, and has been ranked in the Top 20 U.S. Major Teaching Hospitals for two consecutive years by Watson Health. In 2018, Baylor Dallas achieved its fourth consecutive accreditation in the Magnet Recognition Program by the American Nurses Credentialing Center (ANCC). For more information about Baylor University Medical Center, visit BSWHealth.com/Dallas. We welcome applicants who will serve faithfully, act honestly, never settle, and recognize that we are in it together to deliver world-class healthcare. Why Baylor Scott & White Health At Baylor Scott & White Health, we empower each other to create healthier communities and deliver safe and high-quality care across the state of Texas. With more than 52 hospitals, 800 access points, a quality health plan and an award-winning research institute, you’ll enjoy endless opportunities to make your mark on the future of healthcare. At Baylor Scott and White Health, you’ll be joining a team that’s committed to better. Because better never settles. And neither should you. As the largest not-for-profit healthcare system in Texas and one of the largest in the United States, Baylor Scott & White Health has the resources to offer a variety of career opportunities to meet your personal and professional goals. The Baylor Scott & White Health nursing team challenges each other to innovate, to constantly raise the bar and to never settle. Every day, our diverse group of team members bring unique talents, a passion for innovation and a deep Commitment to those we serve. Baylor Scott & White Health Registered Nurses Enjoy · Competitive pay including an RN Bonus Program rewarding nurses for providing exceptional care and improving patient outcomes. · Attractive Relocation Assistance for full-time candidates. · Excellent benefits including a generous 401(k) program with company match, vacation and paid time off (PTO), tuition assistance, immediate eligibility for health and welfare benefits and wellness programs to keep you and your family healthy. (Note: benefits may vary based on position type and/or level). · A strong shared governance model featuring unit-based councils that empower nurses and improve patient outcomes. • Access to more than 4,000 hours of online continuing education for professional development., • A strong system Nurse Practice Council that uses autonomy, authority and accountability in collaboration with transformational nursing leadership to drive nursing practice throughout Baylor Scott & White Health. Seasonal Commitment Information • Seasonal weekly requirements are FT shifts/hours for the 13-week contract (excludes 1st week of orientation), • $1,500 completion bonus for meeting minimum productive time, • $51/hr seasonal rate., • Weekend requirements are the same as regular FT., • The first week is Monday- Friday orientation. · Graduate of an Accredited Nursing Program · License/Certification o RN – Registered Nurse min 1 year CVICU o BLS – Basic Life Support (required within 30 days of hire) o ACLS- American Heart Association o CCRN – through AACN Baylor Scott & White Health is the most awarded system in Texas! Consider a career move to Baylor University Medical Center and join our exceptional nursing team committed to something better.

Location: Baylor University Medical Center (BUMC) | Downtown Dallas, Texas Schedule/Shift: PRN Days | 7a- 7p | One 12hr shift per week About Us At Baylor Scott & White Health, we support the health of people, families, and communities. Baylor Scott and White is Texas' largest nonprofit healthcare system, encouraging healthy living. Our Core Values are: • We serve faithfully by doing what's right with a joyful heart., • We never settle by constantly striving for better., • We are in it together by supporting one another and those we serve., • We make an impact by taking initiative and delivering exceptional experience. Job Summary As a Lactation Consultant RN, you'll create a breastfeeding plan. Educate parents and staff, update protocols, provide consultation. Ensure infants and parents are well by guiding them in breastfeeding. What You'll Do • Encourage breastfeeding for infant health. Offer consultations, materials, and classes to help parents and medical team., • Evaluate parent and baby interest in breastfeeding., • Provide specialized help for mothers. Offer bedside consultations and follow-up visits in hospital., • Keep the medical staff updated, providing education about breastfeeding protocols, care plans, and recent information., • Document all the teachings and responses, and communicate these findings to the relevant staff members., • Regularly assess the efficiency of the breastfeeding program and make necessary changes if required., • Participate in collecting data and reporting on neonatal outcomes, specifically those related to breastfeeding., • You must give good care to moms and babies. Show respect for diversity. Modify patient care plans as needed., • You must work autonomously without supervision., • Good written and oral communication skills are essential for this job., • Interacting positively with diverse people is crucial., • Good problem-solving and critical thinking skills are necessary., • You need basic computer skills. Use software, enter data, keep records secure, and scan with a handheld device. Belonging Statement We believe all people should feel welcomed, valued, and supported. Qualifications • ADN (Associates Degree in Nursing) minimum., • (2) two years of true, direct Mother/Baby/Postpartum (level III or higher) RN experience., • (1) One year of relevant Lactation Consultant RN experience., • You need to be certified or licensed in various areas which include:, • BLS Certification., • Registered Nurse., • Certified Lactation Consultant or International Lactation Certification. CLC: Certified Lactation Consultant OR IBCLC: International Lactation Certification.

Join Baylor University Medical Center as a Registered Nurse and be part of something better! ECMO ICU Opportunities Shift: FT Night The ECMO ICU is looking for experienced ECMO Specialist RNs who strive to deliver the highest quality care for our ECMO population. Come join our ELSO Platinum Center Of Excellence Program! The ECMO Specialist is expected to prime, initiate therapy, independently perform circuit exchanges and emergent interventions, and be proficient in the operation of multiple ECLS components and pumps. Performs intra/inter hospital transport of ECLS patients as part of the interdisciplinary Rapid ECMO Deployment Team. ECMO ICU Patient Population: All ECLS patients receiving VA, VV, VP, VA-V, RVAD and ECPR therapies. Disease processes including but not limited to postcardiotomy syndrome, cardiogenic shock, advanced heart failure, pre and post heart/lung transplant, ARDS, and post cardiac arrest. Patient Ratios: ECMO Specialist to pump ratio 1:3 Department Specifics: 10 dedicated ECMO beds located inside CTTICU, dedicated ICU physicians and ACNP coverage 24/7, 100% certification rate (CCRN, CSC), multiple research trials and publications, and 1 of 2 NTX ECMO programs with ECMO Specialist RN led transport teams. Baylor University Medical Center (Baylor Dallas), part of Baylor Scott & White Health, is a major patient care, teaching and research center located in Dallas, Texas. Established in 1903, the hospital opened with 25 beds and has grown to 914 licensed beds, cares for more than 300,000 people each year and serves as the North Texas flagship hospital of Baylor Scott & White Health. We are home to more than 20 medical specialty centers, many of which are ranked among the top 50 programs in the United States. Baylor Dallas is honored to be recognized by U.S. New & World Report “Best Hospitals” for 29 consecutive years, with similar designations from Newsweek and Becker’s Healthcare, and has been ranked in the Top 20 U.S. Major Teaching Hospitals for two consecutive years by Watson Health. In 2018, Baylor Dallas achieved its fourth consecutive accreditation in the Magnet Recognition Program by the American Nurses Credentialing Center (ANCC). For more information about Baylor University Medical Center, visit BSWHealth.com/Dallas. We welcome applicants who will serve faithfully, act honestly, never settle, and recognize that we are in it together to deliver world-class healthcare. Why Baylor Scott & White Health At Baylor Scott & White Health, we empower each other to create healthier communities and deliver safe and high-quality care across the state of Texas. With more than 52 hospitals, 800 access points, a quality health plan and an award-winning research institute, you’ll enjoy endless opportunities to make your mark on the future of healthcare. At Baylor Scott and White Health, you’ll be joining a team that’s committed to better. Because better never settles. And neither should you. As the largest not-for-profit healthcare system in Texas and one of the largest in the United States, Baylor Scott & White Health has the resources to offer a variety of career opportunities to meet your personal and professional goals. The Baylor Scott & White Health nursing team challenges each other to innovate, to constantly raise the bar and to never settle. Every day, our diverse group of team members bring unique talents, a passion for innovation and a deep Commitment to those we serve. Baylor Scott & White Health Registered Nurses Enjoy · Competitive pay including an RN Bonus Program rewarding nurses for providing exceptional care and improving patient outcomes. · Attractive Relocation Assistance for full-time candidates. · Excellent benefits including a generous 401(k) program with company match, vacation and paid time off (PTO), tuition assistance, immediate eligibility for health and welfare benefits and wellness programs to keep you and your family healthy. (Note: benefits may vary based on position type and/or level). · A strong shared governance model featuring unit-based councils that empower nurses and improve patient outcomes. • Access to more than 4,000 hours of online continuing education for professional development., • A strong system Nurse Practice Council that uses autonomy, authority and accountability in collaboration with transformational nursing leadership to drive nursing practice throughout Baylor Scott & White Health. Registered Nurse Requirements · Graduate of an Accredited Nursing Program · License/Certification o 2 years of ECMO Specialist RN Experience o BLS – Basic Life Support (required within 30 days of hire) o ACLS- American Heart Association o CCRN – through AACN Baylor Scott & White Health is the most awarded system in Texas Work! Consider a career move to Baylor University Medical Center and join our exceptional nursing team committed to something better.

Join Baylor University Medical Center as a Registered Nurse and be part of something better! $15,000 sign-on bonus available to full-time candidates with 2 years RN Acute Care experience ECMO ICU Opportunities FT Night 7:00pm -7:00am The ECMO ICU is looking for experienced ICU RN’s who strive to deliver the highest quality care for our ECMO population. Come join our ELSO Platinum Center of Excellence program! The ECMO ICU RN is competent in all mechanical circulatory devices including percutaneous and implantable ventricular assist devices, intra-aortic balloon pumps, continuous renal replacement therapy and ECMO. Our team is dedicated, efficient, inspiring and committed to providing the most elite extracorporeal care available in the world. ECMO ICU Patient Population: All ECLS patients receiving VA, VV, VP, VA-V, RVAD and ECPR therapies. Disease processes including but not limited to post cardiotomy syndrome, cardiogenic shock, advanced heart failure, pre and post heart/lung transplant, ARDS, and post cardiac arrest. Patient Ratios: 1:1 RN to ECMO patient ratio alongside an ECMO Specialist to pump ratio 1:3 Department Specifics: 10 dedicated ECMO beds located inside CTTICU, dedicated ICU physicians and ACNP coverage 24/7, 100% certification rate (CCRN, CSC), multiple research trials and publications, and 1 of 2 NTX ECMO programs with ECMO Specialist RN led transport teams. Baylor University Medical Center (Baylor Dallas), part of Baylor Scott & White Health, is a major patient care, teaching and research center located in Dallas, Texas. Established in 1903, the hospital opened with 25 beds and has grown to 914 licensed beds, cares for more than 300,000 people each year and serves as the North Texas flagship hospital of Baylor Scott & White Health. We are home to more than 20 medical specialty centers, many of which are ranked among the top 50 programs in the United States. Baylor Dallas is honored to be recognized by U.S. New & World Report “Best Hospitals” for 29 consecutive years, with similar designations from Newsweek and Becker’s Healthcare, and has been ranked in the Top 20 U.S. Major Teaching Hospitals for two consecutive years by Watson Health. In 2018, Baylor Dallas achieved its fourth consecutive accreditation in the Magnet Recognition Program by the American Nurses Credentialing Center (ANCC). For more information about Baylor University Medical Center, visit BSWHealth.com/Dallas. We welcome applicants who will serve faithfully, act honestly, never settle, and recognize that we are in it together to deliver world-class healthcare. Why Baylor Scott & White Health At Baylor Scott & White Health, we empower each other to create healthier communities and deliver safe and high-quality care across the state of Texas. With more than 52 hospitals, 800 access points, a quality health plan and an award-winning research institute, you’ll enjoy endless opportunities to make your mark on the future of healthcare. At Baylor Scott and White Health, you’ll be joining a team that’s committed to better. Because better never settles. And neither should you. As the largest not-for-profit healthcare system in Texas and one of the largest in the United States, Baylor Scott & White Health has the resources to offer a variety of career opportunities to meet your personal and professional goals. The Baylor Scott & White Health nursing team challenges each other to innovate, to constantly raise the bar and to never settle. Every day, our diverse group of team members bring unique talents, a passion for innovation and a deep Commitment to those we serve. Baylor Scott & White Health Registered Nurses Enjoy · Competitive pay including an RN Bonus Program rewarding nurses for providing exceptional care and improving patient outcomes. · Attractive Relocation Assistance for full-time candidates. · Excellent benefits including a generous 401(k) program with company match, vacation and paid time off (PTO), tuition assistance, immediate eligibility for health and welfare benefits and wellness programs to keep you and your family healthy. (Note: benefits may vary based on position type and/or level). · A strong shared governance model featuring unit-based councils that empower nurses and improve patient outcomes. • Access to more than 4,000 hours of online continuing education for professional development., • A strong system Nurse Practice Council that uses autonomy, authority and accountability in collaboration with transformational nursing leadership to drive nursing practice throughout Baylor Scott & White Health. Registered Nurse Requirements · Graduate of an Accredited Nursing Program · License/Certification o RN – Registered Nurse with min of 1-year CVICU or SICU experience o BLS – Basic Life Support o ACLS- American Heart Association o CCRN – through AACN (required within 6 months of hire) Consider a career move to Baylor University Medical Center and join our exceptional nursing team committed to something better.

Upchurch is a rapidly growing, full-service building engineering company providing mechanical, plumbing, HVAC, and electrical services across the southeastern United States. Founded in 1970 and headquartered in Horn Lake, MS, Upchurch has grown through both organic expansion and strategic acquisitions, establishing a strong reputation for quality, reliability, and service excellence. We offer end-to-end solutions—from design and installation to ongoing maintenance and emergency support—helping clients maximize building performance, energy efficiency, and equipment lifespan. Position Summary We’re seeking an experienced Commercial Plumbing Service Technician to join our service team. The ideal candidate will have a strong background in commercial plumbing systems including backflow prevention, boilers (water and low-pressure steam), pump skids, hydro-jetting, and sewer services. The ideal candidate should be able to handle maintenance, emergency service calls, and contract work in large buildings. Key Responsibilities * Troubleshoot, maintain, repair and replace plumbing systems in commercial and institutional facilities including domestic water, sanitary and storm drainage, process piping, and specialty systems. * Perform preventive maintenance and corrective repairs on commercial boiler systems (both hot water and low-pressure steam), including controls, burners, gauges, valves, condensate return, blowdown and safety devices. * Service, troubleshoot and maintain pump skid systems used in water-boosting, heating/cooling loops, pressure maintenance, and fire/water systems. * Test, repair and certify backflow prevention assemblies and devices, maintaining compliance with municipal requirements. * Conduct hydro-jetting of drain and sewer lines, perform drain cleaning, and operate sewer inspection equipment to identify blockages, structural issues, or system defects. * Read and interpret blueprints, piping schematics, equipment submittals and preventive maintenance manuals; estimate labor, materials and time required for service calls and contract work. * Document all work including service logs, inspection sheets, compliance forms, and customer communication. * Maintain truck inventory, tools, and vehicle in a clean, professional condition. * Respond to emergency service calls on a rotating on-call basis, diagnosing problems quickly, coordinating with other trades when needed, and minimizing client downtime. * Ensure all work is performed in compliance with applicable codes and meet company safety & quality standards. Experience & Qualifications * Minimum 5 years of experience in commercial plumbing service for large-scale facilities (office towers, hospitals, schools, industrial plants). * Proven experience with commercial boiler systems including hot-water heating boilers and low-pressure steam boilers: routine and emergency maintenance, burner controls, pressure/temperature safety devices, condensate return, water treatment, and blow-down procedures. Knowledge of low-pressure steam practices as defined under regulatory codes is required. * Solid experience with pump skid systems: preferably including vertical-multistage, booster, or packaged skid units, with ability to understand pump curves, variable-frequency drives (VFDs), pressure/flow monitoring, isolating and servicing components. * Experience testing, repairing and certifying backflow prevention assemblies within commercial systems, with knowledge of local municipal test requirements and compliance. * Experience in sewer and drain service: hydro-jetting large sanitary/storm mains, performing clean-outs in commercial buildings, utilizing sewer-inspection cameras to locate blockages, structural defects or infiltration issues. * Ability to read and interpret blueprints, drawings, specifications, and to perform pipe layout, install and assemble piping, tubes, valves, fixtures, or specialty plumbing equipment. * Valid plumbing license issued by TSBPE (journeyman or master) * Valid driver’s license with a clean driving record. * Strong mechanical aptitude, excellent troubleshooting skills, ability to work independently or as part of a team, good communication with clients and internal staff, professionalism in appearance and customer interaction. * Physical ability to perform job requirements: lifting 50 lbs. frequently, working in confined spaces, climbing ladders, scaffolding, or man lifts as required. Preferred / Bonus Skills * Certification as a Backflow Prevention Assembly Tester (BPAT) or equivalent. * Experience with large mechanical chilled-water/hot-water loops or central plant systems. * Familiarity with computerized maintenance management systems (CMMS), mobile tablet-based documentation and service reporting. * Experience working on multi-trade projects (coordinating with HVAC, electrical, mechanical). Benefits: * Competitive salary based on experience. * Health, dental, and vision insurance. * Paid time off and holiday pay. * Opportunities for professional development and certification assistance. Equal Employment Opportunity: Upchurch Companies provides equal employment opportunities to all employees and applicants. We prohibit discrimination and harassment of any type based on race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Contracting CDL-A Truck Drivers TOP PAY STARTS HERE - Solo drivers net up to $138,000/year; teams earn $240,000+ SIMPLE TERMS. SOLID SUPPORT. - No down payment, no credit check, walkaway lease; set $0.99/gal fuel price TURN AMBITION INTO OWNERSHIP - Lease completion incentives, including custom colors and add-ons for your truck Why Drive for Hirschbach? Hirschbach is contracting CDL A truck drivers in your local area. We are not your typical trucking company. We are driver-focused, driver-first and we mean it. Driving for Hirschbach isn't just another job - it's THE job. We offer drivers industry-leading 24/7 support and our ultra-modern truck fleet comes with the latest features and technology. So if you have at least 6 months CDL-A truck driving experience, apply today to learn about options. You've tried the rest, now run with the best. OTR Truck Driver Job Overview • Run solo or as an existing team. It's your route, your revenue, and your truck. The next step of your career growth starts here., • Thru 4/1, new OTR hires eligible for $10,000 sign-on/stay bonus.* Bonus applies to OTR Solos/Teams, Company or Lease and Regional roles., • Earn more, faster. Get $800 driver orientation qualification process pay & performance incentives up to $0.30/mi, and add accessorial pay to your base CPM., • Bring home up to $138,000 per year as a solo 1099 driver. Base CPM ranges from $1.12-$2.85, depending on length of haul., • Team up and increase earnings. Pre-existing teams only. Refer a teammate and earn $1,200. Net average $210,000 - $248,000 per truck per year; all expenses are split., • Flexible, friendly terms: No down payment, no credit check, walkaway lease., • Fixed, discounted fuel rate: Hirschbach drivers pay $0.99/gallon for fuel, regardless of price at pump., • Full-service maintenance plan: Covers all mechanical parts for $0.10/mi. No out-of-pocket expenses!, • Affordable truck payments: average payments between $800-$900 per week, • 2023-2026 fully-specced Internationals and Freightliner Cascadias, • Includes inverter & carrier APUs, • Large capacity refrigerator, • 24" SmartTV, • Free SiriusXM satellite radio, • Heated & cooled seats, • Valid Class A CDL, • At least 23 years of age Job Type: Full-time Work Location: On the road Reference Number: 112010023-010926

Company Driver | Refrigerated Location: Dallas, TX Company: Hirschbach Motor Lines Pay: Competitive weekly pay (inquire for details) Route Type: otr Start Date: ASAP About the Position Position Information Teams on this account primarily run all 48 states. $800 Driver Orientation Qualification Process Pay to Each Team Driver Account Hightlights: Monthly Safety & Preformance Incentive Stop Pay Driver Referral Bonus New Model Equipment Pet & Passenger Policy Free SiriusXM Lease Drivers Receive: $.99/gallon fuel regardless of pump price Full-Service Maintenance Plan Company Drivers Recieve: $0.70 CPM for all Dispacthed Miles Pay Increase of $.005 every 6 months Caps at $0.75 CPM Practical Benefit Package Vacation Pay (after 1 year) Call a recruiter today • 877-882-9649 It's time to make your move! Requirements • 6 months of recent tractor trailer driving experience • No more than 2 accidents and tickets combined • No major tickets in past 12 months • No more than 3 driving jobs in previous 12 months • No more than 7 driving jobs in previous 3 years • No serious offenses in the previous 7 years or pattern of unsafe practices

Owner Operator | Refrigerated Location: Lancaster, TX Company: Hirschbach Motor Lines Pay: Competitive weekly pay (inquire for details) Route Type: otr Start Date: ASAP About the Position Position Information Teams on this account primarily run all 48 states. $800 Driver Orientation Qualification Process Pay to Each Team Driver Account Hightlights: Monthly Safety & Preformance Incentive Stop Pay Driver Referral Bonus New Model Equipment Pet & Passenger Policy Free SiriusXM Lease Drivers Receive: $.99/gallon fuel regardless of pump price Full-Service Maintenance Plan Company Drivers Recieve: $0.70 CPM for all Dispacthed Miles Pay Increase of $.005 every 6 months Caps at $0.75 CPM Practical Benefit Package Vacation Pay (after 1 year) Call a recruiter today • 877-882-9649 It's time to make your move! Requirements • 6 months of recent tractor trailer driving experience • No more than 2 accidents and tickets combined • No major tickets in past 12 months • No more than 3 driving jobs in previous 12 months • No more than 7 driving jobs in previous 3 years • No serious offenses in the previous 7 years or pattern of unsafe practices

Owner Operator | Refrigerated Location: Dallas, TX Company: Hirschbach Motor Lines Pay: Competitive weekly pay (inquire for details) Route Type: otr Start Date: ASAP About the Position Welcome Home! Hirschbach Motor Lines has immediate opportunities for over the road. Position Information Drivers on this fleet primarily run all 48 states. $800 Driver Orientation Qualification Process Pay Account highlights Monthly Safety & Performance Incentive Bonus 2-3 Weeks Out depending on hiring area 24" Smart TV Lease $0.99/gallon fuel regardless of pump price Full-Service Maintenance Plan Company $0.50 CPM for all dispatched miles Pay increase of $.005 every 6 months Caps at $0.60 CPM Practical Benefit package Vacation Pay (after 1 year) Call a Recruiter Today • 877-882-9649 Requirements • 6 months of recent tractor trailer driving experience • No more than 2 accidents and tickets combined • No major tickets in past 12 months • No more than 3 driving jobs in previous 12 months • No more than 7 driving jobs in previous 3 years • No serious offenses in the previous 7 years or pattern of unsafe practices

Company Driver | Refrigerated Location: Lancaster, TX Company: Hirschbach Motor Lines Pay: Competitive weekly pay (inquire for details) Route Type: otr Start Date: ASAP About the Position Welcome Home! Hirschbach Motor Lines has immediate opportunities for over the road. Position Information Drivers on this fleet primarily run all 48 states. $800 Driver Orientation Qualification Process Pay Account highlights Monthly Safety & Performance Incentive Bonus 2-3 Weeks Out depending on hiring area 24" Smart TV Lease $0.99/gallon fuel regardless of pump price Full-Service Maintenance Plan Company $0.50 CPM for all dispatched miles Pay increase of $.005 every 6 months Caps at $0.60 CPM Practical Benefit package Vacation Pay (after 1 year) Call a Recruiter Today • 877-882-9649 Requirements • 6 months of recent tractor trailer driving experience • No more than 2 accidents and tickets combined • No major tickets in past 12 months • No more than 3 driving jobs in previous 12 months • No more than 7 driving jobs in previous 3 years • No serious offenses in the previous 7 years or pattern of unsafe practices

I’m working with a well established engineering consultancy that is expanding its Water & Wastewater Infrastructure group and is seeking an experienced Project Manager to support outside the fence underground utility projects across the Dallas–Fort Worth market. This opportunity suits someone who enjoys delivering design of pipelines, collection systems, gravity sewers, force mains, lift/pump stations, and broader linear utility infrastructure, and who wants responsibility across project leadership, client engagement, and technical delivery. Job Specifications: • Lead the planning and delivery of complex water and wastewater infrastructure projects across treatment and conveyance systems, • Oversee design execution for treatment process facilities, pipelines, sewer networks, pump/lift stations, stormwater conveyance, and associated civil works, • Develop and manage project scopes, budgets, schedules, and detailed engineering work plans, • Coordinate multi-disciplinary technical teams to deliver compliant, high-quality design packages, • Maintain strong client relationships and support ongoing business development efforts, • Lead internal teams, mentor junior engineers, and contribute to staff development, • Produce engineering reports, design documentation, cost estimates, and regular progress updates, • Monitor financial performance, manage project risk, safety planning, and delivery milestones, • Support proposal preparation and strategic pursuits linked to upcoming infrastructure programs Key Requirements: • B.S. in Civil Engineering, • Licensed Professional Engineer, • 8+ years’ experience delivering municipal water, wastewater, stormwater, or linear utility infrastructure and/or treatment facility projects, • Strong technical background in treatment plant civil works, pipelines, sewers, pump/lift stations, and site civil components, • Proven project management experience, • Excellent communication and client-facing skills, • Experience supporting business development is a plus If this position aligns with your background, apply below and a member of the team will be in contact shortly.

About the Company: MCI is a 46-year-old industry leader in the design, manufacture, and assembly of electrical controls, electrical enclosures, irrigation pumps and controls, municipal and commercial pump stations, water purification systems and design-to-order metal fabrications. We serve a variety of industries with standard and custom products including water pumping, oil production-drill and refining controls, waste water treatment, conveying, baggage conveying, handling, and more! About the Role The Product Support Technician provides customer-facing technical support and parts support for MCI-manufactured products, with a primary focus on the Flowtronex division’s water pumping and purification equipment. This role supports customers, distributors, service centers, and field service technicians by troubleshooting equipment issues, preparing quotations, processing parts-related requests, and helping administer warranty claims. The position also serves as an important link between the field and internal teams by communicating product feedback to engineering and management to support continuous improvement. Responsibilities • Provide phone and email support to customers, service centers, distributors, field service technicians, and internal employees regarding service, parts, and equipment operating in the field., • Respond to technical assistance calls and support replacement-parts inquiries for MCI products., • Prepare written and verbal quotations for parts, accessories, and service-related needs., • Sell parts and accessories and help coordinate timely delivery to customers and service partners., • Support administration of warranty claims and document relevant service information., • Research historical files and equipment records to determine correct product configuration and operating requirements., • Communicate field issues, product concerns, and improvement opportunities to engineering and management., • Support MCI’s commitment to responsive customer service and high-quality aftermarket support. Qualifications • Strong customer service skills and a professional, service-oriented approach., • Strong mechanical aptitude and the ability to work through equipment-related issues logically., • Solid PC skills and the ability to document, research, and communicate information clearly., • Strong written and verbal communication skills with customers and internal departments. Preferred Skills • Experience with pumps, electrical controls, or similar industrial equipment., • Experience with PLC logic, variable frequency drives (VFDs), or related control systems., • Experience with replacement-parts sales, quotations, or aftermarket support., • Ability to interpret older records or equipment files to support troubleshooting and service decisions. Pay range and compensation package Medical, dental, and vision coverage, including free medical options! PTO and company holidays. Quarterly bonus program for all positions. 401(k) Health and dental insurance. Disclaimer The information contained herein is not intended to be an all-inclusive list of the duties and responsibilities of the job, nor are they intended to be an all-inclusive list of the skills and abilities required to do the job. Management may, at its discretion, assign or reassign duties and responsibilities to this job at any time. The duties and responsibilities in this job description may be subject to change at any time due to reasonable accommodation or other reasons. EEO Notice Motor Controls, Inc provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Motor Controls, Inc complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Our client is seeking a Project Engineer who wants more than routine project work they want purpose. Join a people first team that values your expertise, supports your growth, and empowers you to make a real impact on communities across Texas. With a culture built on collaboration, innovation, and balance, you’ll help shape the future of water resources while advancing along a clear path to leadership. What You’ll Do • Support the design and delivery of water and wastewater treatment projects, • Assist with planning, modeling, and infrastructure design (pipelines, pump stations, distribution systems), • Collaborate with project managers on schedules, technical tasks, and documentation, • Contribute to mentoring junior engineers, • Ensure compliance with state and federal water regulations, • Provide sustainable, innovative solutions for public and private clients What We’re Looking For • Bachelor’s in Civil, Environmental, or related engineering field, • Texas P.E. license or ability to obtain via reciprocity (E.I.T. considered), • 3–5+ years of experience in water/wastewater

Make an impact with NTT DATA Join a company that is pushing the boundaries of what is possible. We are renowned for our technical excellence and leading innovations, and for making a difference to our clients and society. Our workplace embraces diversity and inclusion – it’s a place where you can grow, belong and thrive. Essential Duties & Responsibilities • Supervises the Data Center Technicians and the Facilities Technicians., • Operates and maintains data center in such a condition as to assure the most optimal uptime to customers for facilities services (electrical, cooling, etc. measured by Five 9’s)., • Tasks out the CFOps team in such a way that complies with all local, state, and federal requirements for fire, health and Life Safety., • Provides tasking for the daily operations and maintenance scheduling of non-critical and critical maintenance., • Ensures the CFOps team works effectively to achieve the CFOps goals, reviewing budget, staff planning, NPS, efficiency, etc., • Analyzes data center equipment to obtain maximum effectiveness and efficiency; safety, cost, equipment longevity, and reliability., • Conducts in-depth training with the Data Center Technicians on equipment, PM’s, QA and CFOps procedures/processes., • Manages and maintains all training documentation; provides documentation to HR., • Ensures data center operates at maximum efficiency, including: analyzing existing operating conditions, recommending new technologies, maintaining customer SLA requirements, and improving overall efficiency while maintaining budget expectations., • Works with customers to provide successful installs that exceed expectations – delight the customer., • Supervises the safety and well-being of all CFOps team., • Responsible for shift assignments, timekeeping review & approval and PTO approval for all assigned Data Center Technicians and Facilities Technicians., • Writes and Reviews non-critical and critical Method of Procedures (MOP’s), Standard Operating Procedures (SOP), Standard Method of Procedure (SMP) and provides input., • Supervises the execution of non-critical and critical Method of Procedures and ensures their thorough completion., • Strong background in electrical and mechanical systems design review, layout, installation, commissioning and operations, • Expert knowledge of low voltage systems, including fire, security and PLCs, • Expert knowledge of NFPA Electrical, Fire and Life Safety and building codes, • Expert knowledge of NEC, NFPA 70E, NFPA 72, NFPA 25 and compliance issues, • Expert knowledge in industrial safety best practices (i.e. lockout/tag out, arc flash protection, OSHA and state regulations), • Experienced with data trending / tracking and analysis and ability to rapidly learn and use PC based, integrated critical monitoring systems, • Strong supervisor skills, • Excellent communication skills, both written and oral, • Extensive hands-on experience installing, maintaining and troubleshooting large commercial and industrial mechanical & electrical systems including:, • 12kV switchgear, • 480/277 and 208/120 volt electrical generation and distribution systems, • Diesel powered AC generator plants up to 2MW, • Static UPS systems, • Multi-string flooded cell batteries and monitoring systems, • Static switches, • PLC and relay logic controls, • Power monitoring systems, • Data center power distribution and management systems, • VFD Drives, • Large Centrifugal Chillers, • Cooling Towers, • Water Treatment Systems, • HVAC equipment, • Computer Room AC Units (CRACs), • Kyoto Cooling Units (where applicable), • Operating Building Management and Industrial PLC Control Systems, • Emergency Standby Diesel Generator Systems, • Fuel/Oil systems, Fuel/Oil Day tanks and Fuel/Oil Storage Tanks, • Knowledge of NFPA 25, sprinkler and dry-stand pipe systems, including Emergency Fire Pump where applicable, • Chilled/Condenser Water Pump, • Well/Vault or Sump Pumps, • Domestic Water systems, including BackFlow Prevention devices, • Proficient with MS Office Suite (Word, Excel, PowerPoint, Project), • Ability to train the electrical and mechanical teams on the systems and the procedures, • Ability to conduct power & fire system capacity, safety and code compliance assessments, • Ability to operate in and promote a rigorous process-driven, team environment, • Ability to logically analyze and solve problems, • Ability to multi-task multiple projects, • Bachelor of Science in Engineering degree or equivalent work experience normally obtained with 5-6 years’ related experience., • A minimum of 5 or more years in a mechanical/electrical position within critical facilities, including Power or critical electrical power/mechanical environment (preference given to data center, hospital, semi- conductor or power plant experience)., • Minimum of two or more years as a foreman, lead or senior level technician in a critical facility environment., • Certified Electrician preferred in state where assigned., • CPR/First Aid and NFPA70E Certification during employment., • Primarily walking, standing, and bending with some sitting., • Ability to communicate effectively with verbal, visual and listening skills, • Able to lift heavy equipment, up to 50 pounds., • Close visual work on a computer terminal., • Dexterity of hands and fingers to operate any required equipment as well as to operate computer keyboard, mouse, and other technical instruments., • Typical data center work environment with varying temperatures and loud noises., • Extensive daily usage of a computer or workstation., • Must be comfortable working in a highly critical, fast paced environment shifting priorities, • Must be able to respond to emergency situations at the data center., • Must be willing to be part of the after-hours notification and escalation protocol., • Must carry a cell phone for availability during assigned shift and emergency situations., • Must be willing to work outside normal business hours, including weekends, late nights, holidays., • Must wear leather close-toed shoes with a solid rubber sole.

Job Description About Plumbing Systems Inc. (PSI) Plumbing System Inc. is an established company with over 30 years of experience providing top-tier service and quality products in many areas around the Vail Valley and Summit County area. THIS ROLE IS BASED IN GYPSUM, CO - Relocation is offered to experienced candidates! About This Role As an HVAC Lead Installer at Plumbing Systems Inc. (PSI), you'll be the hands-on leader of your installation team. After receiving instructions from our Installation Manager, you'll coordinate, guide, and work alongside your team to deliver high-quality installations. You'll handle a broad range of HVAC and refrigeration equipment while ensuring every job meets PSI's high standards for safety, quality, and customer service. What You'll Do * Spend approximately 80% of your time installing heat pump mini splits and conventional AC units * Install, maintain, and repair residential and commercial heating, ventilation, and cooling systems * Diagnose and repair electronic, mechanical, and electrical components of HVAC equipment * Maintain inventory, parts, tools, and ensure proper use of safety equipment * Mentor and train apprentices, sharing your knowledge and expertise on the job * Diagnose service issues, order replacement parts, and calibrate systems per manufacturer specifications * Deliver excellent customer service by clearly communicating technical, scheduling, and maintenance information * Perform all work honestly, diligently, and in alignment with PSI's core values * Work on impressive, world-class homes and projects We'd Love to Hear From You If You Have: * 3+ years of hands-on installation experience and a desire to grow in your career * Strong communication skills and an ability to explain maintenance needs to customers in clear terms * Comfort with technology, including tablets and work-related software * Experience preparing quotes for repairs and replacement installations * Proven track record installing, replacing, and servicing HVAC systems in residential and commercial settings Working Conditions & Physical Demands * Safety is our top priority; general knowledge of OSHA requirements and safe work practices is expected * Regularly required to stand, walk, stoop, climb ladders, and work in crawl spaces * Ability to work in both hot and cold environments throughout the year * Must be able to lift and move 50+ lbs on a regular basis * Standard schedule: Monday–Friday, 7:30 am–5:00 pm The pay for this position is $28-$45/hour or more depending on job-related knowledge, skills, experience, and location, plus performance based incentives. Other incentive pay may be provided as part of the compensation package, in addition to a full range of medical, financial, and/or other benefits, depending on the position offered. Benefits and Perks: Plumbing Systems Inc. (PSI) treats its team members with the same level of dedication and care as we do our customers, which is why we're fortunate to provide all of our employees with: • Competitive Pay, • Benefits: We offer top-notch benefits!, • Various medical, dental & vision plans, including 100% employer covered options for you and your family, • 401(k) with a company match up to 3.5%, • 100% Company paid long & short-term disability and life insurance, • Flexible spending accounts for health and dependent care, • Training and Career Growth: We are scaling quickly and would support this person's career growth and development, • Paid Time Off: 6 company paid holidays, 3 weeks of PTO, and a paid Parental Leave Policy

Job DescriptionDescription: Now Hiring – Experienced Commercial HVAC Refrigeration Service Technician (DFW Metroplex) RLP Mechanical | $35–$42/hr | Weekly Pay | Take-Home Truck + Full Benefits At RLP Mechanical, we know skilled techs deserve more than just a paycheck — you deserve respect, the right tools for the job, and a company that has your back. For over 15 years, we’ve been a trusted leader in commercial refrigeration, HVAC, plumbing, and mechanical services across DFW. Our reputation for quality starts with hiring the best — and right now, we’re looking for another top-tier HVAC refrigeration tech to join our team. Why You’ll Love Working Here • Competitive Pay – $35–$42/hr (based on experience) + weekly pay, • Take-Home Company Truck – Fully stocked with recovery machine, vacuum pump, ladders, and more, • Industry-Leading Benefits – Full medical, dental, vision + 401(k) with a 6% company match on 4% contribution, • Paid Time Off – Up to 20 days PTO (based on experience) + paid holidays from day one, • Diagnose, service, and repair commercial HVAC refrigeration systems: walk-in coolers/freezers, reach-ins, rack systems, ice machines as well as RTU’s, split systems, and chillers., • Perform preventive maintenance to keep systems running at peak efficiency, • Troubleshoot electrical and mechanical issues quickly and effectively, • Follow all safety protocols and refrigerant handling guidelines, • Communicate clearly with customers and recommend needed repairs or upgrades, • 3–6+ years of hands-on commercial refrigeration & HVAC service experience. Rack system experience is required., • Previous commercial kitchen equipment repair experience is a plus, • Proven skill with diagnostics, repairs, and system performance optimization, • EPA Type II certification required | OSHA 30 preferred, • Valid Texas driver’s license with a clean driving record Our technicians aren’t just numbers on a roster — they’re the reason our customers keep coming back. We believe in honest work, professional respect, and long-term careers. We give you the tools, trust, and time you need to do the job right. If you’re an experienced refrigeration tech looking for better pay, better tools, and better treatment, it’s time to make the move to RLP Mechanical.2 Serving the greater Dallas–Fort Worth area and surrounding communities. Apply today and let’s talk about your future. #RLP123 Requirements:

Do you want to grow with us? At DXP we are passionate about what we do and driven to be the best solution for our industrial customers. Since 1908 DXP has been dedicated to the highest quality of customer service through our expertise of the products we distribute and the technical services we perform with a sense of individual pride and company spirit. Throughout your career with DXP, we will encourage and empower you to take an active role in identifying and driving your development, so you feel total confidence in your ability to achieve ongoing success. We aspire to be the best solution for the Industrial customers' needs for MROP products and services through our Innovative Pumping Solutions, Metal Working, Supply Chain Services and Service Centers. Check out our many videos to learn more! ___ Responsibilities of the Pump Service Technician include, but are not limited to: • Repair, fabricate, install and remove a variety of centrifugal, gear, diaphragm, and reciprocating pumps as well as other related rotating equipment either in-house or in the field. Qualifications of the Pump Service Technician include, but are not limited to: • Municipal and Industrial pump experience including sewage and lift station pumps and controls, vertical and horizontal centrifugal pumps., • Blower and Vacuum pump experience desirable., • Must supply own tools., • Background check, physical, and drug test required., • Acceptable driving record required according to company guidelines. Additional Information: Physical Demand: Must be able to lift up to 50lbs. Working Conditions: Shop and field environment. Training/Certifications: N/A. Shift Time/Overtime: Monday - Friday, 7:00am - 4:00pm / Overtime and weekends as necessary. Travel: To/From job sites - some outside of Texas. Acceptable driving record required according to company guidelines. Education: High School Diploma or GED. Location: USA:TX:Grand Prairie #LI-CT1 #zrct DXP is always looking for individuals who want to join a team of employees who have the desire to achieve remarkable accomplishments together. The culture of the organization is supportive and goal oriented with high expectations, yet it is an environment where the team spirit inspires everyone to do their best. All DXP employees play a vital part in the organization and are treated with respect. By applying to DXP, you will have the opportunity to speak with some of the most respected professionals in the industry. DXP offers a comprehensive benefits package for full-time regular employees, normally working a minimum of 30 hours per week including: Medical, Dental, Vision, Flexible Spending, 401(k), paid holidays, Life and Disability Insurance, and additional supplemental products. All part-time and temporary employees are eligible for 401(k). Minimum Required Salary and benefits commensurate with experience. We are an equal opportunity employer. Except where prohibited by state law, all offers of employment are conditioned upon successfully passing a drug test. This employer uses E-Verify. EOE/M/F/D/V

About USS: United Site Services is the industry leader in comprehensive site services, committed to creating partnerships that help enable our customers’ project and event success. Our deep industry expertise, excellence in process management, and dedication to corporate responsibility are pillars of our value proposition; each supported by tangible, best-practice programs. Our success is fueled by the dedication and collaboration of our diverse team, which includes field technicians, customer care representatives, sales professionals, and functional experts. Each member of our team plays a vital role in ensuring a seamless and reliable experience for our customers. By joining United Site Services, you will be part of an organization that values continuous improvement, teamwork, and excellence in every aspect of our business. Overview: The Service Technician operates a company service truck and drives to various locations to service/pump/clean portable restrooms and/or holding tanks. This position is the heart of our business. Responsibilities: • Perform basic service truck driving functions in accordance with USS and DOT requirements., • Perform all work duties in a safe manner in accordance with USS and DOT safety standards to ensure no accidents or injuries., • Perform duties by sitting, standing, stooping, kneeling, crouching or crawling. In addition, perform lifting/pushing between 50 and 150 lbs. on a frequent basis during work shift., • Conduct portable toilets servicing to USS 8 point service standard., • Perform customer service interaction when on customer work sites to ensure they are getting the services completed to their standard., • Ability to be flexible in order to meet customer needs when routes needs to be adjusted or changed., • Provide routing feedback to Operations Manager/Supervisor/Coordinator to be most efficient as well as giving the customer the best service possible., • Ability to strategically plan for customer needs by discussing their portable toilet needs, so the customer's current and future needs are satisfied. Qualifications:, • Minimum two years of commercial driving experience., • Valid Driver License (CDL or non-commercial)., • Excellent time management, customer service and communication skills., • Strong problem-solving and decision making skills. Physical Requirements:, • Sit while driving and stand while servicing products, • Use hands and fingers to handle, control or feel objects tools or controls, • Repeat the same movements, • See details of objects that are less than a few feet away and also at greater distance, • Speak clearly so customers can understand, • Understand the speech of another person, • Hear sounds and recognize the difference between them, • Walk up to 30 minutes at a time without exertion, • Enter and exit equipment by stepping and kneeling, • Lift up to 40lbs from your waist to your shoulders, • Lift 30lbs from the floor to your head, • Crouch and squat, • Holiday & Paid Time Off (pro-rated for Part-Time employees), • Medical/Pharmacy, • Dental, • Vision, • Employer-Paid Short-Term Disability, • Employer-Paid Employee Basic Life & Accidental Death and Dismemberment, • Voluntary Employee Life & Accidental Death and Dismemberment, • Voluntary Spousal Life, • Voluntary Dependent Life, • Hospital Indemnity, Accident and Critical Illness, • Commuter/Transit Account, • Healthcare Flexible Spending Account, • Dependent Care Flexible Spending Account, • Health Savings Account, • 401(k) with employer match, • Employer-Paid Employee Assistance Program (EAP), • Employee Discounts Salary Range: $20.00 – $25.06 / hour Pay Transparency Statement: At United Site Services, our salary ranges reflect the minimum and maximum base pay for the posted position applicable to all locations across the US. Within the posted salary range, individual pay is determined by the geographic location, job related skills, experience, education, and certifications. Our total compensation package includes base pay plus a comprehensive benefits program. EEO Statement: Some positions may require secure site access and/or domestic air travel. All candidates for positions which require secure site access and/or domestic air travel must possess an acceptable form of identification to comply with state and federal regulations, such as REAL ID-compliant driver’s license or state ID, or U.S. passport. This statement is not intended to require documentation beyond what is acceptable under the federal I-9 form process administered by the U.S. Citizenship and Immigration Services (USCIS); and should not be construed as creating additional employment eligibility verification requirements. United Site Services is an equal opportunity employer. In accordance with applicable law, we prohibit discrimination against any applicant or employee based on any legally-recognized basis, including, but not limited to: race, color, religion, sex (including pregnancy, lactation, childbirth or related medical conditions), sexual orientation , gender identity , age (40 and over), national origin or ancestry, citizenship status, physical or mental disability, genetic information (including testing and characteristics), veteran status, uniformed servicemember status or any other status protected by federal, state or local law. Our commitment to equal opportunity employment applies to all persons involved in our operations and prohibits unlawful discrimination by any employee, including supervisors and co-workers.

About USS: United Site Services is the industry leader in comprehensive site services, committed to creating partnerships that help enable our customers’ project and event success. Our deep industry expertise, excellence in process management, and dedication to corporate responsibility are pillars of our value proposition; each supported by tangible, best-practice programs. Our success is fueled by the dedication and collaboration of our diverse team, which includes field technicians, customer care representatives, sales professionals, and functional experts. Each member of our team plays a vital role in ensuring a seamless and reliable experience for our customers. By joining United Site Services, you will be part of an organization that values continuous improvement, teamwork, and excellence in every aspect of our business. Overview: The Special Events Service Technician is responsible for operating a company service truck and driving to various locations at an event to service/pump/clean portable restrooms or holding tanks. This position also performs basic pick-up and delivery of units and the installation and removal of temporary fences at special events. Workdays are Thursday - Monday. The Special Events Service Technician must be willing to travel to support special events throughout the region and to support other regions as needed. This is a Seasonal position. A seasonal employee is an employee who is hired in a job for a temporary period or for a specific assignment or group of assignments designed to last for less than 180 days. Seasonal employees normally are not eligible for participation in Company benefits, except as otherwise required by applicable law. Seasonal employees are not eligible for merit pay increases. Responsibilities: • Conduct daily pre-shift vehicle inspection & report deficiencies to management immediately. Conduct daily inspection of all tools assigned to the truck to ensure safety and proper working condition. Check loads to ensure that truck has all material (units, fence panels, poles, etc.) and tools needed to complete service tickets, • Operate service trucks to and from pre-designated work sites based on assignment information. Maintain a clean and fully stocked truck, • Operate flatbed trucks to and from pre-designated work sites based on daily routing information to deliver or pick up portable restroom units, hand sinks, holding tanks, or containers. Update system and tickets with relevant delivery or pick-up detail, • Operate fence trucks to and from pre-designated work sites based on daily routing information to deliver or pick up the fence (chain link, panel, materials, etc.). Also, act as a point of contact on fence jobs where a crew is assigned to the job/truck and will operate fence installation equipment, • Operate tanker/transfer truck to and from the local dump and completes required paperwork as necessary, • Service portable restrooms, holding tanks, septic tanks, sinks, showers, etc., at various work sites by following the Company's servicing guidelines. Notifies management of any issues encountered on route assigned, • Unload all fence materials and install fence panels, with appropriate tools, at the work site in accordance with pre-determined specifications. Locate, measure, and mark the location for placement of panels & installation, • Troubleshoot and address all basic repair and maintenance as needed on-site so as to not disrupt the customer experience. Report all special maintenance requests and/or equipment replacements in FSL, • Perform pick-up and delivery of United Site Services (USS) units at customer locations in a timely manner in accordance with customer needs, • Strategically plan for customer needs by discussing their pickup and delivery needs, so the customer's current and future needs are satisfied, • Work with dispatch to keep updated on service schedule changes throughout the day and adapt to changes as needed, • Conduct all work duties in a safe manner in accordance with USS and DOT safety standards to ensure no accidents or injuries, • Interact with customers on-site to ensure they are getting the services completed to their standard, • Work with Operations Manager/Supervisor/Coordinator by providing customer feedback as it relates to service needs and expectations, • Meet with site superintendent (or other designated representative) to confirm work order, • Maintain telephone or radio contact with supervisor to receive additional instructions, changes to work locations, etc, • Maintain truck log according to state and federal regulations, • Perform other duties as assigned Qualifications:, • Minimum two years of commercial driving experience., • Valid Commercial Driver's license (Class CDL A or B with endorsement or Class C, D, or E (depending on state)., • Excellent time management, customer service and communication skills., • Strong problem-solving and decision-making skills., • Ability to meet deadlines. Physical Requirements:, • Sit while driving and stand while servicing products, • Use hands and fingers to handle, control or feel objects tools or controls, • Repeat the same movements, • See details of objects that are less than a few feet away and also at greater distance, • Speak clearly so customers can understand, • Understand the speech of another person, • Hear sounds and recognize the difference between them, • Walk up to 30 minutes at a time without exertion, • Enter and exit equipment by stepping and kneeling, • Lift up to 40lbs from your waist to your shoulders, • Lift 30lbs from the floor to your head, • Crouch and squat, • Holiday & Paid Time Off (pro-rated for Part-Time employees), • Medical/Pharmacy, • Dental, • Vision, • Employer-Paid Short-Term Disability, • Employer-Paid Employee Basic Life & Accidental Death and Dismemberment, • Voluntary Employee Life & Accidental Death and Dismemberment, • Voluntary Spousal Life, • Voluntary Dependent Life, • Hospital Indemnity, Accident and Critical Illness, • Commuter/Transit Account, • Healthcare Flexible Spending Account, • Dependent Care Flexible Spending Account, • Health Savings Account, • 401(k) with employer match, • Employer-Paid Employee Assistance Program (EAP), • Employee Discounts Salary Range: $29.03 – $42.09 / hour Pay Transparency Statement: At United Site Services, our salary ranges reflect the minimum and maximum base pay for the posted position applicable to all locations across the US. Within the posted salary range, individual pay is determined by the geographic location, job related skills, experience, education, and certifications. Our total compensation package includes base pay plus a comprehensive benefits program. EEO Statement: Some positions may require secure site access and/or domestic air travel. All candidates for positions which require secure site access and/or domestic air travel must possess an acceptable form of identification to comply with state and federal regulations, such as REAL ID-compliant driver’s license or state ID, or U.S. passport. This statement is not intended to require documentation beyond what is acceptable under the federal I-9 form process administered by the U.S. Citizenship and Immigration Services (USCIS); and should not be construed as creating additional employment eligibility verification requirements. United Site Services is an equal opportunity employer. In accordance with applicable law, we prohibit discrimination against any applicant or employee based on any legally-recognized basis, including, but not limited to: race, color, religion, sex (including pregnancy, lactation, childbirth or related medical conditions), sexual orientation , gender identity , age (40 and over), national origin or ancestry, citizenship status, physical or mental disability, genetic information (including testing and characteristics), veteran status, uniformed servicemember status or any other status protected by federal, state or local law. Our commitment to equal opportunity employment applies to all persons involved in our operations and prohibits unlawful discrimination by any employee, including supervisors and co-workers.

Job DescriptionAnkem is a leading provider of industrial cleaning supplies and solutions since 1969, serving a wide range of commercial and industrial clients. With a commitment to quality, sustainability, and customer service, we help businesses maintain, clean, safe, and compliant environments. We are looking for motivated and results driven Delivery Drivers/Technicians to join our growing team. Job OverviewWe are seeking a dependable and motivated Field Delivery Technician to join our team. This role combines commercial driving, equipment operation, and hands-on technical support. The ideal candidate is safety-focused, mechanically inclined, and comfortable working both in the field and in a warehouse environment. This position involves delivering product to ready-mix plants, operating pumping systems, testing equipment, and supporting general warehouse operations. Responsibilities • Safely operate 26 ft box trucks and dually trucks, • Load and unload trucks efficiently and safely, • Deliver product to ready-mix plants in a timely manner, • Pump product over at customer locations, • Test and ensure proper functionality of company systems, • Operate a forklift as needed, • Assist with general warehouse duties, • Maintain cleanliness and organization of designated work areas, • Follow all DOT regulations and company safety procedures, • Complete required paperwork and delivery documentationRequirements, • Valid driver’s license (CDL not required unless specified), • Current DOT Medical Card (Med Card) required, • Experience driving a 26 ft box truck, • Forklift experience (certification preferred), • Ability to lift 50+ lbs regularly, • Strong work ethic and attention to detail, • Ability to work independently and as part of a team, • Clean driving record, • Mechanical aptitude or experience testing equipment/systems preferred, • Familiarity with pumping systems or industrial equipment, • Experience delivering to construction sites or ready-mix plants

Job Description This is a hands-on assembly role requiring: • technical discipline, process adherence, and mechanical or electrical aptitude. You will be directly contributing to, • the build and quality of cooling infrastructure systems that power data centers across North America., • This is not general labor. This is skilled production work where your attention to detail and consistency directly, • impacts product quality, delivery timelines, and client commitments., • Key Responsibilities, • Assemble liquid-cooled load banks, heat exchangers, pump systems, fans, piping, and electrical control, • components, • Read and interpret blueprints, assembly schematics, and structured work instructions, • Perform light electrical work including wiring, crimping, and connection termination, • Operate power tools, hand tools, and precision measurement instruments, • Conduct quality inspections and checks to ensure accuracy, fit, and standards compliance, • Identify and report assembly defects or process inconsistencies to supervisors, • Assist with material movement, product staging, crating, and shipment preparation, • Collaborate with engineers and supervisors to optimize workflow and production output, • Maintain a clean, organized workstation in alignment with 5S methodology, • Work Environment & Requirements, • Warehouse facility — not fully temperature controlled; exposure to outside climate conditions, • Required PPE: Steel toe boots, safety vest, safety gloves, and safety goggles, • GMP compliance and 5S methodology strictly observed, • Standing, bending, and repetitive motion throughout shift, • Ability to lift up to 50 lbs, • Minimum Qualifications, • Strong work ethic and detail-oriented mindset, • Mechanically inclined with ability to follow structured assembly processes, • Ability to read and interpret basic schematics or work instructions, • Punctual, reliable, and consistent

Job Description GENERAL DESCRIPTION: The Coating Operator is responsible for all activities related to the coating of the product as per formula instructions. Also, responsible for adhering to SOPs and GMPs to assure the quality and quantity of product produced conforms to company standards. Works under the general direction of production management. ESSENTIAL DUTIES/RESPONSIBILITIES/FUNCTIONS: • Follow all Good Manufacturing Practices., • Follow good health and hygiene practices including gowning., • Follow procedures for changing gloves in between products and as needed., • Follow GMPs at all times., • Clean equipment, utensils and room according to approved cleaning procedures., • Record production activities on batch production record and logs using good documentation practices. • Operate coating pans including checking inlet/outlet temperatures, air flow across pan, mist checker flow meters, gear pump calibration and solution spray rate, nozzle atomized air flow rate, etc. • Prepare coating solutions as required, (clear or color), load tablets, operate aqueous coating machines and maintain attention time to process variables and the indicators, (gauges, meters, control knobs and valves) that are provided. • Upon completion of coating cycle, cool down tablet bed, and polish tablets if applicable. Coordinate testing of disintegration time and appearance results with Quality Assurance to ensure customer specifications are achieved. • Download/discharge of coated tablets into sanitary product containers., • Obtain quality approval as required by current operating procedures., • Follow BPR’s, SOP’s, GMP’s, and safety guidelines. Monitors operations for deviations, quality problems, or mechanical problems. • Work cooperatively with co-workers and supervisors., • Maintain regular and punctual attendance at work., • All other duties as assigned. MARGINAL JOB FUNCTIONS: • Identifies safety, quality, and efficiency improvements., • Assist with the troubleshooting of equipment/processing problems. QUALIFICATIONS & SKILLS REQUIRED TO PERFORM JOB DUTIES: • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent. Familiar with the metric system. • Mechanical ability to disassemble/reassemble various coating area equipment., • Accuracy and attention to detail is extremely critical., • Good communication skills and ability to work both individually and as part of a team with a variety of people. • Ability to speak, read and write in English. PHYSICAL REQUIREMENTS TO PERFORM JOB DUTIES: • Stand and walk on hard surfaces for long periods of time, up to 4 hours at a time., • Stand/remain upright, walk, kneel, bend, turn, stoop and squat repetitively., • Stand/remain upright and stationary for long periods of time, up to 4 hours at a time. • Reach forward repeatedly., • Able to see/read details at close range (within a few feet)., • Able to handle drums up to 110 kg and lift containers up to 40 lbs., • Able to hand-scoop 5 lbs. intermittently throughout the workday., • Job requires wearing personal protective equipment to include various styles of respirators (1/2 face, full face, and dust mask). EDUCATION AND/OR EXPERIENCE REQUIRED TO PERFORM JOB DUTIES: • High School diploma or GED preferred., • Experience in pharmaceutical production desired., • Basic reading comprehension and math skills necessary to follow BPR instructions and complete BPR calculations. Company DescriptionStaff Force Personnel Services: 9786 Skillman St, Dallas, TX 75243 Hours of application: Monday- Friday 9am-2pmStaff Force Personnel Services: 9786 Skillman St, Dallas, TX 75243\r\nHours of application: Monday- Friday 9am-2pm

Customer Service Pump Applications Representative.Summary: The Customer Service Pump Applications Representative will select and specify pump equipment, prepare equipment proposals utilizing support tools, respond to customer inquiries regarding company pump related products and services, and proces

Assist customers and manage cash register. Maintain neatness and cleanliness of the fuel center. Recover stock, fill out incident and security reports, and maintain compliance documentation. Demonstrate the company's core values of respect, honesty, integrity, diversity, inclusion and safety. RESPONSIBILITIES * Model Customer 1st behavior; deliver and encourage other associates to deliver excellent customer service * Pump gas * Complete daily tour and inspection * Fill out incident and security reports * Clean up fuel spills and complete Fuel Spill Report * Recover displays; maintain cleanliness of department * Perform cashier functions * Answer telephones * Comply with corporate policies * Comply with all safety guidelines and standards * Promote and follow company initiatives * Maintain knowledge of emergency plans numbers and procedures * Ability to work cooperatively in high paced and sometimes stressful environment. * Ability to manage conflict in a reasonable, nonconfrontational and cooperative manner. * Ability to act with honesty and integrity regarding customer and business information. * Ability to follow directions and seek assistance when necessary to resolve customer and business issues. * Provide support and assistance through direct interaction with minors, individuals with special needs, and/or older adults. * Must be able to perform the essential job functions of this position with or without reasonable accommodation QUALIFICATIONS MINIMUM * Familiarity with industry/technical terms and processes * Ability to work in a fastpaced environment * Ability to work without direct supervision DESIRED * Any related experience * Knowledge of company policies, procedures, and organizational structure $0 - $0 per hour

Job Description Stonemark Management is looking for Service (Lead Maintenance) Supervisors for multiple properties in the Dallas, Irving and Mesquite Texas area. We are recruiting for ALL positions. There are multiple positions to fill. Join us at Hidden Ridge Apartments for this exciting Job Fair! Location: Hidden Ridge Apartments 1290 Hidden Ridge, Irving, TX 75038 Tuesday, April 14th, 2026 and Wednesday, April 15th, 2026 from 9am to 5pm. Face to face interviews will be conducted and job offers will be made. If you are looking for a fresh start this new year with a good company, come and interview for one of our open positions. Stonemark Management, LLC, a national multi-family management company seeks highly motivated (Lead Maintenance) Service Supervisors to join our team. Ideal candidates must be people oriented with technical aptitude, strong organizational, and make-ready skills. Candidate must be capable of working with little or no supervision. If you are interested in an environment that offers new opportunities/experiences every day please read further. The company offers a comprehensive benefits package that includes medical, dental, vision, life, flexible spending accounts, 401(k), bonus potential, vacation and sick time, and continued education and training, as well as many other benefits. Position Summary: Supervises and coordinates activities of workers engaged in preserving and maintaining physical facilities and grounds within the community so they are safe and aesthetically appealing to current and prospective residents. Job Responsibilities: Assists in all aspects of the community's maintenance, including: grounds, interior painting, custodial, preventive, corrective, deferred, and emergency maintenance. Supervises and establishes daily work schedule for maintenance staff. Provides service to residents, and repair work on vacant apartments in a prompt and professional manner. Approves expenditures within the guidelines of the approved budget. Performs other duties as assigned or which are inherent to the position. Assists the Community Manager in performing his or her duties. Experience/Skills: EPA Certification - Universal Level required. Must be people oriented with technical aptitude and strong organizational and make-ready skills. Must have experience in overseeing interior and exterior renovation projects. Must have experience working on heat pump systems. Must be able to use all types of hand and power tools, Freon recovery machinery, air conditioning gauges, and vacuum pumps. Must be available for after hour's emergency calls, including weekends and holidays if needed. Experience in Onesite and Ops is preferred. Interested applicants please email your resume EOE/Drug free Workplace Must submit to a background check and drug testing. • Principals only. Recruiters, please don't contact this job poster., • do NOT contact us with unsolicited services or offers

We have an opening for a Sales Engineer located in a geographic sales territory that includes the Dallas-Fort Worth market area. Engineering degree a plus, but not mandatory. Industrial pump or similar sales experience can supplant engineering degree requirement.

Description Specialization: Cardiovascular Surgery Job Summary: Medical City Dallas is seeking an experienced Advanced Practice Provider to care for pre and post-operative cardiac surgery patients. Qualified Candidates: • Have experience in CVICU and knowledge of a variety of mechanical circulatory support devices (intra-aortic balloon pump, Impella, VV/VA ECMO), • Able to work a full time 4x10 schedule with rotating weekend coverage, • Manage patients in the CVICU recovering from CABG, valve replacement including TAVRs, complex aortic reconstruction, LVAD placement and heart transplantation in addition to our mechanical circulator support patients, • Paid malpractice, • Coverage for medical, behavioral health, prescription drugs, dental and vision, • Wellbeing resources, including free counseling, • Life insurance, • 401(k) plan with employer matching contributions, • Time off, including disability coverage, • Supplemental health protection plans, • Flexible spending accounts, • Financial wellbeing resources, • Family-focused and voluntary benefits, • CME time and dues allowance and license reimbursement About Medical City Heart Hospital:, • Wide scope of cardiac services, including complex vascular and heart surgery, advanced heart failure treatment, structural heart, minimally invasive vascular surgery and other specialized heart care, • Offering advanced care and minimally invasive procedures to treat and prevent heart failure, • Comprehensive program focused on the whole patient, • Team members are committed to significantly reducing heart failure symptoms and help patients return to their daily lives Dallas is the 9th largest city in the US and the third largest in Texas with a population of 1,281,047. Dallas is centrally located and within a four-hour flight from most North American destinations. It is served by two airports; Dallas/Ft. Worth International and Dallas Love Field that combined provide more than 2,200 flights daily. AMTRAK also provides daily service to Dallas via Union Station. The Dallas area is home to 21 Fortune 500 companies including Exxon Mobil, JC Penney, AT&T, Texas Instruments, and others. Dallas is home to five professional sports teams: The Dallas Cowboys (NFL); Dallas Stars (NHL); Dallas Mavericks (NBA); Dallas Wings (WNBA); FC Dallas (MLS) and the Texas Rangers (MLB) plus NASCAR and Indy racing. The area is also home to more than 200 golf courses.

Two years of experience in the field of industrial maintenance, vehicle repair and construction including specific experience in mechanical applications such as hydraulic, power transmission equipment, pump maintenance, pipe fitting, pneumatics, lubrication and shaft alignment techniques. Provides o

Job Description Job description: Position Overview Relocation packet provided, NC or VA. We are seeking an experienced Industrial Superintendent with a strong background in wastewater treatment plant construction to oversee field operations on complex industrial projects. The ideal candidate will have 5–10+ years of experience specifically within the wastewater treatment sector and possess a thorough understanding of treatment plant processes, safety compliance, scheduling, and crew leadership. This role is responsible for managing daily jobsite operations, ensuring projects are completed safely, on time, within budget, and in accordance with plans, specifications, and regulatory requirements. Key Responsibilities • Provide on-site leadership and supervision for wastewater treatment plant construction projects, • Coordinate and manage subcontractors, field personnel, and self-perform crews, • Interpret and execute project plans, specifications, shop drawings, and contracts, • Develop and maintain short-term schedules in alignment with the master project schedule, • Ensure strict compliance with OSHA, federal, state, and local safety regulations, • Lead daily safety meetings, enforce site safety policies, and promote a safety-first culture, • Coordinate inspections, testing, and commissioning activities, • Oversee installation of:, • Process piping systems, • Mechanical equipment (pumps, blowers, clarifiers, digesters, etc.), • Structural concrete and formwork, • Underground utilities and sitework, • Collaborate closely with Project Managers, Engineers, Owners, and Inspectors, • Identify and proactively resolve field issues to avoid delays or cost overruns, • Monitor productivity and quality control standards, • Minimum 5–10 years of experience in industrial construction, • Demonstrated experience specifically in wastewater treatment plant construction, • Strong knowledge of treatment plant processes and industrial systems, • OSHA 30 Certification (required), • Ability to read and interpret blueprints, technical drawings, and specifications, • Proven leadership experience managing crews and subcontractors, • Strong understanding of industrial mechanical, structural, and civil components, • Familiarity with scheduling software and construction management tools, • Experience with large-scale municipal or private wastewater treatment facilities, • Knowledge of pump stations, lift stations, clarifiers, aeration systems, digesters, and SCADA systems, • Experience coordinating startup and commissioning phases, • Field-based position on active industrial construction sites, • Fast-paced, deadline-driven environment, • Requires standing, walking, climbing, and working in outdoor conditions, • Competitive salary based on experience, • Health, dental, and vision insurance, • Paid time off and holidays, • Retirement plan options Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Relocation assistance, • Retirement plan, • Vision insurance

Job DescriptionUnited Flow Technologies is a platform established in July 2021 to invest in the municipal and industrial water and wastewater market. UFT has partnered with market leading businesses to create a national provider of process, pump, automation & control, and other equipment solutions. And we’re just getting started making strategic partnerships to provide clean water across the country! We are hiring a Talent and People Benefits Administrator to join our growing Talent and People team in Irving, Texas. This role will play a critical part in supporting a rapidly expanding, multi‑state workforce across the UFT platform of companies. As we scale, this position offers hands‑on ownership, cross‑company exposure, and the opportunity to help build efficient, compliant benefits processes in a high‑growth environment. The ideal candidate thrives in change, is highly organized, and brings a proactive, solutions‑oriented mindset to benefits administration. This position is in the office Monday - Friday during core business hours. Responsibilities:Benefits Administration: • Administer employee benefit programs, including medical, dental, vision, life insurance, disability, retirement plans, leave programs, and wellness initiatives, • Process benefit enrollments, changes, and terminations accurately and within required timelines, • Ensure compliance with federal, state, and local regulations (e.g., ERISA, COBRA, HIPAA, ACA, FMLA)Employee Support & Communication:, • Serve as the primary point of contact for employee benefits questions and issue resolution, • Educate employees on benefit options, eligibility, and enrollment processes, • Support annual open enrollment planning, execution, and employee communicationsVendor & Partner Management:, • Coordinate with benefits brokers, carriers, and third‑party administrators to resolve issues and ensure service quality, • Reconcile monthly benefit invoices and resolve discrepancies in a timely mannerData, Reporting & Compliance:, • Maintain accurate benefit records in HRIS and benefits platforms, • Identify opportunities to improve benefits processes, systems, and employee experience, • Support benefits projects and initiatives, including new program implementation or system upgradesExperience/ Background:, • 5+ years of HR and Benefits experience is required., • Experience processing benefits for multi-state employees., • Experience using HRIS and Benefits systems. Paylocity is preferred., • Experience creating and running reports in HRIS/ Benefits systems., • Very strong organizational and attention to detail skills., • Excellent verbal communication skills., • Proficiency in Microsoft Office 365., • Ability to work in a fast-paced environment., • Comfortable working on-site five days a week in Irving, Texas.We are manufacturers’ representatives, partnering with leading equipment providers to provide world class products, efficient solutions, and valuable services to municipalities and industrial customers across the United States.

Job Description Established and successful engineering firm based in Dallas is looking for a water/wastewater design engineer with at least 7-10 years of water wastewater design for residential pump stations and municipal facility design projects. Must be familiar with water and wastewater treatment processes and technologies to be able to create detailed designs of water/wastewater treatment, pump stations, and collection/distribution systems, including plans and specifications, site layouts, and equipment selection. This is the most senior position inside of the Water/Wastewater group, reporting directly into the office principal, WITHOUT any business development requirements. As a full time employee you will receive paid health insurance, a condensed work week and the support of a solid engineering group with expertise and passion for delivering exceptional service and the highest quality projects. Requirements: • BS Degree, • PE, • 10 years water/wastewater design engineering, • Municipal facility and residential pump station design

Job DescriptionWhat We Offer: Our excellent salary and benefits package includes medical, dental, vision, life insurance, short and long-term disability coverage, education reimbursement, 401(k), performance bonuses, and an employee stock program. Employee Resource Groups and Programs offered include the Young Professionals Group, Women at Wade Trim, Diversity, Equity and Inclusion, Professional Development, Leadership Development, Rotation Program, Mentor Program, Sustainability Program, and Wellness Program. Position Description: We are looking for a Senior Project Manager to join our Water Team to improve infrastructure in our Dallas/Fort Worth office. Candidates should have a bachelor's degree in civil or environmental engineering, fifteen or more years of water resources design and project management experience and a PE license. Experience using Microsoft Office and design software and excellent verbal and written communication skills is also required. A flexible hybrid-remote work schedule available after 90 days of employment. A flexible hybrid-remote work schedule available after 30 days of employment.Typical responsibilities include: • Provide project management, technical planning, design and construction support on various stormwater, water and wastewater treatment and collection system projects, • Become the client manager for targeted key clients, • Actively participate in improving Wade Trim"s visibility and brand, • Prepare engineering calculations and supporting analysis of alternatives, • Develop and complete applications, permits, engineering reports and specifications, • Prepare and review engineer estimates, • Prepare design cost estimates, • Conduct research and development for projects, • Monitor task budget and progress, • Prepare project status and other reports, • Communicate project details with other design engineers, • Conduct project cost reviews, • Promote sales, • Prepare and review scope, budget and schedule for project tasks, • Assist with proposals, marketing, project reports and technical presentations, • Conduct on-site inspections as needed, • Attend and/or conduct client and project meetings, • Attend various meetings including pre-design, plan review, pre-construction, professional organization, staff, etc., • Attend seminars and/or training classes, • Maintain excellent client relations, • Maintain a safe working environmentEducation:, • Bachelor's Degree in Civil or Environmental Engineering required, • Master's Degree in Civil or Environmental Engineering preferredSkills/Experience:, • 15+ years of related experience required, • Licensed Professional Engineer required, • Preferred experience in Pump Station Design, Pipeline Design, or Water/Wastewater Treatment

Job Description About Us: MCI is a 46-year-old industry leader in the design, manufacture, and assembly of electrical controls, electrical enclosures, irrigation pumps and controls, municipal and commercial pump stations, water purification systems and design-to-order metal fabrications. We serve a variety of industries with standard and custom products including water pumping, oil production-drill and refining controls, waste water treatment, conveying, baggage conveying, handling, and more! $5,000 in total Signing Bonuses! · $1,500 after 30 days · $1,500 after 6 months · $2,000 after 12 months Position Summary This position is responsible for testing and troubleshooting industrial control panels, pump station systems, and related electrical equipment before shipment. The ideal candidate will be able to read electrical schematics, identify wiring or component issues, perform functional testing, and ensure products meet company and customer quality standards. Key Responsibilities · Perform electrical and functional testing of industrial control panels and equipment · Read and interpret electrical schematics and wiring diagrams · Diagnose and correct wiring, component, and programming issues · Verify products meet quality standards and specifications · Document test results and quality findings · Work closely with production, engineering, and service teams to resolve issues Qualifications · 3+ years of experience in electrical testing, quality control, or industrial controls · Ability to read electrical schematics and troubleshoot electrical systems · Experience with PLCs, motors, VFDs, and control panels preferred · Strong attention to detail and problem-solving ability · Industrial or manufacturing experience preferred Preferred Experience · Inspection of UL 508A industrial control panels · Knowledge of NEMA enclosure requirements · Experience in panel shop or electrical manufacturing environment Benefits · Medical, Dental, and Vision coverage (including a free medical plan option) · PTO, Paid Holidays, Paid Bereavement, and Paid Jury Duty · 401k with matching · Employer-paid life insurance

Job Description The Business Development Leader- DFW North position is a dynamic, high-energy outside sales representative, responsible for growing new and existing accounts which use hygienic fluid handling components and equipment. The primary responsibility is to grow market share among customers in a specific region of Texas. Specific customer segments include: • Food, Dairy, Beverage, and Pharmaceutical Manufacturers, • OEM and Fabricators, • Pumps, Valves, Heat Exchangers, Instrumentation, Tank Cleaning, • Spare Parts, • Pipe, Tubing, Fittings, Hanging components, • Service opportunities for Valves, Plate Heat Exchangers, and high-speed separators, • Pump Repair and Remanufacturing, • The territory focuses on customers in the Northern DFW area, primarily North of Highway 20, to the Oklahoma border., • Notable cities in the territory include Wichita Falls, Mt. Pleasant, Garland, Denison, Plano, Mineral Wells, Grapevine, Terrell, and Paris. Sales Activities • Target Processors, resellers, and OEMs in all hygienic industries, in the assigned geography., • Generate year-over-year growth in the distributed products and service categories., • Speak into CSI’s sales strategy and value proposition by identifying industry trends and shifts in target markets., • Promote CSI eCommerce usage and speak into opportunities to improve the store., • Responsible for proactive calls, prompt lead follow-up, and communication to promote CSI products and develop positive business relationships for CSI., • Adopt, maintain, and propagate a philosophy of accountability for CSI sales functions., • Provide leadership to support team members by exhibiting professional and ethical conduct as well as a strong work ethic., • Build relationships between people at CSI and people at the customer or prospect company., • Prospect under-served geographies and provide business intelligence to the Sales Manager- Texas for the purpose of supporting the long-term regional strategy., • Develop and nurture relationships with CSI support personnel to further grow awareness and revenue. Examples of support personnel and their roles:, • CSR – quoting and order entry, • Project Management & Estimating- Site Services, Fabrication, • Marketing and sales support, • Accounting, • Purchasing, • Executive team About CSI: CSI provides state-of-the-art stainless-steel process equipment and service for the food, dairy, beverage, pharmaceutical, and personal care industries. We are a growing company with a passion for providing superior customer service. Our work environment is rooted in respect, teamwork, continual learning, and growth... with a large dose of community and fun! We believe our employees are our greatest resource and are committed to investing in our team. Which is why we offer employees the possibility of free monthly healthcare premiums, paid time off, retirement planning, on-going personal development and more! If it wasn’t already obvious, we also value fun and community! Which is why we strive to create an enjoyable and positive work environment – hosting company BBQs, bringing in local food trucks, casual Fridays, wellness programs, and even encouraging our team to invest and volunteer in our local community. We’re looking for fun and energetic candidates that want to join our growing family and ensure our customers delight in CSI. If this sounds like you, what are you waiting for? Apply now! Salary + Commission: Starting at $125K Primary Functions • Contribute to overall vision of increased sales through accountability and relationship management - daily, • Learn characteristics, including specific market, of each customer to determine what products and solutions have the most potential - ongoing, • Proactively identify, question, and suggest changes to standard procedures - ongoing, • Make systematic and efficient sales visits to customers and prospects at their plant and corporate locations - ongoing, • Formulate, write and implement a business plan stating goals and sales strategies to achieve those goals – quarterly, • Maintain an up-to-date cookbook with core tactics and responsibilities - weekly, • Develop rapport with, and delegate appropriate tasks to, assigned inside sales representatives, technical consultants, project managers, and estimators - ongoing, • Respond to customer requests for information - daily, • Communicate special customer needs to customer service, special alloys and design in organized and well documented manner - daily, • Enter notes in CRM, per procedure, to document all completed and scheduled activities - daily, • Understand and follow established procedures for sales, project management, purchasing, and returns - daily, • Submit activity report per procedure - ongoing, • Communicate strategic plan and progress to Sales Manager – Texas - monthly, • Maintain major projects list showing jobs being pursued and their status. - monthly, • Maintain a positive relationship with personnel for equipment manufacturers - ongoing Education/Training: • Equipment sales experience in food and/or pharmaceutical industries, • Exposure to estimating design and application of process equipment, • Experience with sales management, • Proficiency in computer OS and MS Office Suite, • Valid Driver's License, • Ability to travel to customer locations, • Clean driving record This position requires the ability to interact with employees and customers verbally and in writing, remain in a stationary position for 80% of the workday, have close visual acuity, and constantly operate a computer and other office productivity equipment, such as a phone, copy/fax/scan machine, computer keyboard and mouse with or without reasonable accommodation. This position also requires the ability to occasionally lift, stoop, bend, and lift product, materials, and supplies, up to 30 pounds. CSI has a long standing policy of Equal Opportunity in employment. Our practice is to fill positions by selecting applicants who can perform the work in a competent and professional manner. We do not discriminate on the basis of age, sex, race, color, religion, national origin, sexual orientation, gender identity, protected veteran status, or individuals with disability. U.S. federal law requires completion of employment eligibility verification upon hire. CSI participates in E-Verify. Must have the right to work in the United States.

Job DescriptionDescription: The Technician, Aquatics & Water Features is responsible for physically performing general and specialized maintenance and minor to intermediate repairs to the Arboretum water features and exhibits, including fountains, pumps, ponds with fish and aquatic plants, and other related systems. Conduct water testing as needed and apply chemical treatments in accordance with industry standards and departmental policies. Maintain and properly store related equipment and supplies. Work in all weather conditions. Oversee workflow for efficient productivity and timely completion of duties in assigned areas. Physically operate loud equipment including power tools and pressure washers, as well as transporting work materials/equipment. This position reports to the Director of Facilities. Essential duties and responsibilities included but are not limited to: • Perform routine maintenance tasks such as cleaning filters, inspecting pumps, backwashing filters, changing UV bulbs, and testing water quality to ensure pools and ponds are operating efficiently., • Maintain interactive features according to Arboretum, city, and state standards, including daily water testing with a chemical test kit, adjusting recommended water chemical balance by adding chemicals as needed, keeping track of daily written log for water testing, checking filters and pumps on a consistent basis, etc., • Feed fish according to industry standards. Maintain pH, chlorine, nitrate, and other necessary levels to sustain aquatic life and apply chemicals as needed., • Diagnose and troubleshoot minor to intermediate mechanical issues to notify supervisors or implement necessary repairs promptly., • Removing debris from pools and ponds as well as regularly vacuuming and brushing features and exhibits., • Report and acknowledge maintenance issues to direct supervisors in a timely manner, as well as, following up on repairs if necessary, • Work with Arboretum employees to maintain cleanliness, safety, and security of pump vaults, mechanical rooms, and storage facilities., • Install /repair and set up pool and pond equipment including pumps, filters, UV systems, and chemical feeders according to manufacturer specifications and safety guidelines., • Update written and or digital records and logs regarding water chemistry levels for applicable features and exhibits, • Secure and maintain all chemicals in appropriate storage facilities on site, • Adhere to safety protocols and regulations while working on pool and pond systems to prevent accidents and ensure a safe working environment for oneself and others., • Proven knowledge of pool and pond equipment, including pumps, filters, UV systems, and chemical feeders., • Familiarity with plumbing, mechanical and electrical systems related to pool and water feature installations., • Must be able to perform basic maintenance on pools and aquatic systems., • Must have the ability to use basic hand and power tools in order to maintain pool and aquatic systems., • Effective communication skills and the ability to interact professionally with guests and team members., • Physical stamina and dexterity to perform tasks that may require lifting (30 lbs.), bending, climbing 8-to-16-foot ladders and working in outdoor environments., • Ability to manage multiple tasks through use of effective organizational and time management skills, • Ability to work independently, with minimal supervision, and efficiently complete assigned tasks in a timely manner, according to written maintenance standards, • Comfortable working outdoors in various weather conditions and responding to urgent facility needs., • Ability to read and understand maintenance user manuals, blueprints, and other written technical documents, • Valid driver's license to drive garden vehicles, • Must have a Certified Pool Operator (CPO) license, or the ability to obtain one within 6 months with company assistance, • Manage multiple tasks with attention to detail and accuracy; follow schedules and meet deadlines, • Problem analysis and problem-solving skills; good independent judgment skills., • Work collaboratively and cooperatively with supervisors and staff To help you stay energized, engaged, and inspired, we offer a wide range of benefits including comprehensive healthcare, a 401K, and Paid Time Off (PTO). The mission of the Dallas Arboretum and Botanical Garden is to be a garden for all that enriches lives through beauty, learning, and connection. We are a world-class sanctuary where people and plants flourish in the natural environment. The Dallas Arboretum is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, age, color, ancestry, national origin, place of birth, religion, sex, sexual orientation, gender identity and expression, military or veteran status, genetic characteristics or disability unrelated to job performance.

Job DescriptionUnited Flow Technologies is a platform established in July 2021 to invest in the municipal and industrial water and wastewater market. UFT has partnered with market leading businesses to create a national provider of process, pump, automation & control, and other equipment solutions. And we’re just getting started making strategic partnerships to provide clean water across the country! We are seeking a highly-motivated, detail-oriented Legal Assistant to support our General Counsel. This is a unique opportunity to join the department at the ground level and work directly with senior leadership in a fast-paced, high-growth environment. This role blends hands-on legal support and executive support —perfect for someone who is scrappy, adaptable, and excited to take ownership as priorities shift. This position requires working in our Irving, TX office Monday- Friday. Legal Support Responsibilities: • Support the full contract lifecycle (NDAs, customer/vendor agreements, contractor agreements, leases), • Help run corporate governance (board materials, entity management, and filings), • Do targeted legal research and turn it into clear summaries, • Track compliance items and help maintain practical internal policies, • Keep legal files and data rooms organized; support M&A and financing workstreams as needed, • Coordinate with outside counsel on litigation, investigations, and other mattersExecutive & Administrative Support Responsibilities:, • Own scheduling and meeting logistics; prepare materials and keep action items moving, • Be a go-to partner across internal departments and with external advisors and parties, • Jump into ad hoc projects across legal, compliance, and business functions, • Build and improve processes, templates, and systems as we continue to scaleWho You Are:, • Organized and detail-oriented (you like clean systems and crisp documents), • Scrappy, resourceful, and comfortable learning on the fly, • A strong communicator who can write clearly and follow through on actions, • Trusted with sensitive and confidential information; good judgment, professionalism, and discretion are a must, • Happy to roll up your sleeves—no job is “too small", • A plus if you are considering law school or a legal operations career path (commercial litigation, labor & employment, or corporate transactions).Background/ Experience:, • Bachelor’s degree with a strong academic record, • 2 to 3 years of experience in legal support, • Curiosity about law, business, and strategy, • Comfort with Microsoft 365 suite, • Paralegal certification a plus, • Comfort using AI tools (e.g., Copilot, Claude, ChatGPT) a plusWe are manufacturers’ representatives, partnering with leading equipment providers to provide world class products, efficient solutions, and valuable services to municipalities and industrial customers across the United States.

Job DescriptionJob Title: HVAC System Engineer Location: 3728 Arapaho Rd Addison, TX 75001 Engagement: Fulltime- Direct Hire Experience level: 3- 5 Years of Relevant Experience About AIIR: AIIR focuses exclusively on delivering innovative, sustainable systems that leverage advanced machine learning technology. Our flagship product, the AIIR Intelligent HVAC system, delivers greater energy efficiency compared to traditional systems, intelligently adapting to environmental conditions and occupant needs in real time. AIIR is committed to creating healthier, more comfortable living spaces through smart technology. Its steadfast dedication to sustainability and innovation drives the development of solutions that improve project outcomes and positively impact the planet. AIIR Products is a pioneering provider of AI-powered heating and cooling solutions designed to enhance comfort and energy efficiency in multi-family, residential, and hospitality settings. AIIR focuses exclusively on delivering innovative, sustainable systems that leverage advanced machine learning technology. AIIR is committed to creating healthier, more comfortable living spaces through smart technology. Its steadfast dedication to sustainability and innovation drives the development of solutions that improve project outcomes and positively impact the planet. HVAC System Engineer The Senior HVAC Systems Engineer will work within the AIIR HVAC development team, providing product expertise and deep systems knowledge that will drive first-of-its-kind HVAC thermal designs that lower acquisition costs, lower lifetime cost of ownership, provide innovative feature sets, and lower energy consumption. What you will do: • Conduct the HVAC system design using simulation packages to match up the HVAC components efficiently, • Support HVAC system and equipment validation through comparison between modeling results and commissioning data, • Follow product schedules and work continuously to meet schedule milestones, • Work with internal and external resources and companies to bring products to production and implementation, • Support improvements in advanced technologies to attain a competitive advantage and to maintain AIIR leadership image in technology., • Have a deep understanding of the ASHRAE, AHRI, and UL StandardsWhat you should have:, • Experience developing high efficiency heat pump HVAC systems utilizing advanced technology such as variable speed compressors, electronic expansion valves and high efficiency motors and microchannel heat exchangers., • Thorough knowledge of the engineering fundamentals and the underlying physics of HVAC systems., • Demonstrated experience in development of cutting edge HVAC systems including analysis, system design and performance validation., • Demonstrated experience using industry standard system simulation tools to answer critical design questions., • Demonstrated experience developing advanced control algorithms, • Proven ability to work within a product development team and with external development partners, OEM’s/ODM’s, and suppliers., • Proven track record of innovation and product success., • Experience with a top tier HVAC system manufacturer highly desired.Job Qualifications:, • Minimum bachelor’s degree in mechanical engineering and 3-5 years of relevant experience, • Effective problem-solving and analytical skills, • Strong organizational and time management skills, • Strong verbal and written communication skills, • Strong knowledge of Fluid Dynamics and Thermodynamics, • Familiar with the R&D environment, • Familiar with HVAC industry specifications, standards, and codes Ready for Your Next Big Adventure? If you are a strategic thinker and innovation in the HVAC industry, we want to hear from you! Please submit your resume and a cover letter detailing your relevant experience. AIIR Products is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Powered by JazzHR qQrJHo8kjN

Job DescriptionUnited Flow Technologies is a platform established in July 2021 to invest in the municipal and industrial water and wastewater market. UFT has partnered with market leading businesses to create a national provider of process, pump, automation & control, and other equipment solutions. And we’re just getting started making strategic partnerships to provide clean water across the country! United Flow Technologies is seeking a Director of Sales Performance for the Central Region. This role supports multiple representative firms and works closely with Regional Presidents and sales leaders to strengthen seller effectiveness, accelerate onboarding, and improve consistency in sales process execution. A key responsibility is enabling strategic commercial initiatives across the region to support long-term growth. The ideal candidate brings strong coaching ability, process discipline, and experience influencing sales teams in technical, multi-stakeholder environments. Seller Coaching & Development: • Provide ongoing coaching through ride-alongs, joint customer calls, and account reviews., • Build individualized development plans for sellers, • Reinforce best practices for both short-cycle and long-cycle project selling. Strategic Growth Enablement:, • Support the execution of key commercial initiatives designed to expand market presence, strengthen customer relationships, and increase revenue opportunities., • Partner with regional leadership to align sales teams with strategic priorities, including market development, customer expansion, and organizational growth initiatives., • Ensure visibility, communication, and field adoption of assigned commercial priorities. Sales Process & System Execution:, • Ensure consistent use of the UFT Standard Sales Process across all Central rep firms., • Reinforce required weekly, monthly, and annual sales activities tied to pipeline development, territory planning, and long-term opportunity management., • Drive accurate and consistent use of CRM/ERP systems for forecasting, opportunity tracking, and reporting. Onboarding & Ramp Time Improvement:, • Lead the regional onboarding process for all new sellers., • Deliver training on UFT product pillars, customer segments, selling behaviors, and Central Region market dynamics., • Track onboarding milestones and continuously improve ramp-time effectiveness. Market Coverage & Field Insights:, • Partner with Regional Presidents and sales managers to evaluate territory structure, customer engagement, and growth opportunities., • Review pipeline trends, forecast accuracy, and performance analytics to inform decision-making., • Share field insights with senior leadership regarding risks, opportunities, and emerging needs. Culture & Leadership:, • Build strong, trust-based relationships with sellers and managers across the Central Region., • Promote a culture of accountability, collaboration, and continuous improvement., • Influence without authority across a multi-company structure. Required Qualifications:, • 7+ years of sales experience in water/wastewater, industrial equipment, or technical/engineering sales., • Demonstrated success coaching or leading sales professionals., • Strong understanding of municipal/industrial procurement and long-cycle project sales., • Excellent communication, facilitation, and interpersonal skills., • Ability to travel regionally 50–70%. Preferred Qualifications:, • Experience in a rep-firm or multi-company model., • Background in sales enablement, sales training, or sales operations., • CRM/ERP proficiency and comfort with sales analytics., • Experience supporting commercial integration during organizational growth or acquisitions. We are manufacturers’ representatives, partnering with leading equipment providers to provide world class products, efficient solutions, and valuable services to municipalities and industrial customers across the United States.

Job DescriptionWhat We Offer: Our excellent salary and benefits package includes medical, dental, vision, life insurance, short and long-term disability coverage, education reimbursement, 401(k), performance bonuses, and an employee stock program. Employee Resource Groups and Programs offered include the Young Professionals Group, Women at Wade Trim, Diversity, Equity and Inclusion, Professional Development, Leadership Development, Rotation Program, Mentor Program, Sustainability Program, and Wellness Program. Position Description: We are looking for a Entry Level Civil/Environmental Engineer to join our Water department to improve infrastructure in our Dallas or Fort Worth office. Candidates must have a bachelor's degree in civil and/or environmental engineering and zero to three years of related experience. EIT license is required. Excellent technical writing, organization and communication skills are essential. Candidates must be self-motivated and able to work well with others. A flexible hybrid-remote work schedule available after 30 days of employment.Typical responsibilities include: • Provide technical planning, design, permitting, and construction support on various water utility projects that may include collection system, pump station, wastewater treatment, reclaimed water, water treatment, water distribution, and various other ancillary civil engineering projects., • Prepare engineering calculations and supporting analysis of alternatives, • Prepare design reports and construction plans using local and state standards, • Prepare construction plans using AutoCAD 3D, Civil 3D and Revit, • Review plans and specifications, • Prepare/assist with permit submittals, • Prepare preliminary project cost estimates and evaluate quantities, • Assist with/review scope, budget, and schedule of new project tasks, • Monitor task budget and progress, • Document design changes and communications, • Conduct on-site inspections as needed, • Prepare project status and other reports, • Assist in the preparation of proposals, • Assist Project Managers, • Attend client, public, project and staff meetings including client progress, plan review, preconstruction, etc., • Manage project tasks an/or projects, • Participate in associations, • Maintain excellent client relations, • Maintain a safe working environmentEducation:, • Bachelor's Degree in Civil or Environmental Engineering requiredSkills/Experience:, • 0-3+ years of related experience required

Job DescriptionDescription: Soleo Health is seeking a Patient Accounts Specialist to support our Specialty Infusion Pharmacy and work Remotely (USA). Join us in Simplifying Complex Care! Home infusion therapy experience required. • Competitive Wages, • 401(k) with a Match, • Referral Bonus, • Paid Time Off, • Great Company Culture, • Annual Merit Based Increases, • No Weekends or Holidays, • Paid Parental Leave Options, • Affordable Medical, Dental, & Vision Insurance Plans, • Company Paid Disability & Basic Life Insurance, • HSA & FSA (including dependent care) Options The Patient Account Specialist is responsible for the billing and collection activities for Soleo Health’s Patient Accounts Receivable. The Patient Account Specialist will work with branch Intake and Reimbursement teams to manage the Patient Accounts Receivable including balances for copay/deductibles, Soleo Assistance, self-pay patients and manufacturer co-payment programs. Responsibilities include: • Review billing statements for patient balances remaining after third party payments have been received and posted and Generate and distribute Patient Collection Reports to the field identifying delinquent patient accounts, • Communicates with patients regarding overdue balances, billing concerns and/or payment arrangements, • Monitor Soleo’s collection agency portal and provide requested information as needed, • Prepare necessary adjustments to patient balances after all collection efforts have been exhausted, • Reviews Soleo Assistance Applications for final approval or denial, • Create and submit manufacturer co-payment claims in a timely manner, • Manage the Mfg Co Pay A/R for prompt collections, • Maintain positive relationships with Mfg Co-Pay Programs, • Create patient invoices for missing pumps as identified by the Pump Management Team and tracks them through the collections process, • Research and prepare patient refund requests when necessary, • Researches patient correspondence and return mail, • Documents notes in a clear and concise fashion in Company software system, • Identifies issues/trends and escalates to Manager when assistance is needed, • Provides exceptional customer service to internal and external customers, • Ensures compliance with federal, state, and local governments, third party contracts and company policies, • Other duties as requested Schedule: • Monday-Friday 830a-5p, Pacific time Zone preferredRequirements:, • Knowledge of home infusion therapy billing practices required, • 1 year of Medical and Billing Collections experience required, • High School Diploma or GED required, • Knowledge of HCPC-coding and medical terminology, • Excellent math and writing skills, • Experience providing customer service to internal and external customers, • Excel and Outlook experience required Soleo’s Core Values: • Improve patients’ lives every day, • Be passionate in everything you do, • Encourage unlimited ideas and creative thinking, • Make decisions as if you own the company, • Do the right thing Soleo Health is an Equal Opportunity Employer, celebrating diversity and committed to creating an inclusive environment for all employees. Soleo Health does not discriminate in employment on the basis of race, color, religion, sex, pregnancy, gender identity, national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an organization, parental status, military service or other non-merit factor. Keywords: billing specialist, collection specialist, accounts receivable, specialty pharmacy, now hiring, hiring immediately

Job Description Hazen and Sawyer is seeking a Process-Mechanical Revit Designer with knowledge and experience designing Process Mechanical piping in Revit to work alongside staff Engineers and Senior CAD/BIM Designers. This position will include the design and production of contract documents for various Water, Wastewater and Pump Station facilities projects. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • Creation of Revit models, Revit families, and CAD base files for use in creating contract documents., • Ability to design piping layouts in Revit to produce enlarged plans, sections, and details for various process mechanical systems, • Coordinate with other disciplines (Site Civil, Structural, Architectural, HVAC, Electrical, and I&C) to help resolve design conflicts and challenges., • Executing redlines from Engineers and senior CAD/BIM Designers, • Ensure drawing compliance with company and client CAD standards, • Completion of a technical school with CAD design certificate or A.S. degree with emphasis on Revit MEP preferred, • Minimum 3 years’ experience using Revit MEP and AutoCAD required., • Experience leading and coordinating drawing production for small to medium sized projects, • Some design experience with water and/or wastewater projects desired, • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job DescriptionSalary: Urban Infraconstruction is looking for aSuperintendent to join our Water Resource Department. We are proud to be a leader in civil construction, delivering high-impact infrastructure projects that improve communities and drive progress. As one of the fastest-growing private companies in the industry, we are committed to innovation, precision, and excellence in everything we dofrom preconstruction through project delivery. Our team thrives in a fast-paced, growth-focused environment where strategic thinking, cross-functional collaboration, and measurable results drive our success. With a strong foundation built on integrity, quality, and accountability, were shaping the future of infrastructure one project at a time. Key Responsibilities: • Supervise and direct field crews and subcontractors on water infrastructure projects (water lines, pump stations, treatment facilities, underground utilities, etc.), • Ensure all work is completed safely and in compliance with company policies, OSHA regulations, and project specifications., • Manage daily schedules, manpower allocation, equipment use, and material delivery coordination., • Review plans, drawings, and specifications to ensure accurate field execution., • Conduct daily safety meetings, toolbox talks, and field inspections., • Maintain project documentation including daily reports, logs, timecards, and site photos., • Collaborate closely with the Project Manager on progress updates, potential issues, and project milestones. Qualifications: • 4+ years of experience in water infrastructure construction., • Proven experience as a Superintendent or Lead Foreman on water-related projects., • Strong understanding of water systems (potable water, wastewater, pump stations, distribution/collection systems), • Must have a valid driver's license Our Company is committed to being an equal opportunity employer and will consider all applications for all positions equally without regard to their race, sex, age, color, religion, national origin, veteran status, genetic information, among other things, or any other legally protected status.

Job DescriptionFLEET TECHNICIAN BASIC FUNCTIONS: Temporary April-June 30, 2026 Service vehicles according to established preventive maintenance schedule. Rotate and balance tires, change oil and filters, lubricate vehicle parts, inspect and replace hoses, belts, mirrors, lamps, and maintain all fluid levels. Use diagnostic equipment to evaluate mechanical problems in vehicles. Maintain accurate and updated records of preventive maintenance. Operate tools, equipment, and machinery according to prescribed safety procedures. Correct unsafe conditions in work area and report any conditions that are not correctable to supervisor immediately. Maintain accurate records of time and materials required to perform repairs and services. Diagnoses mechanical problems of vehicles. Promotes high standards of safety and acceptable housekeeping methods in all working areas. Performs mechanical duties such as a general mechanics functions and recognition and repair of all safety equipment. Operate engine hoist and forklift as required. Strong communication and interpersonal skills. QUALIFICATIONS: Accredited High School Diploma or equivalent (U.S.A. equivalency) required. Minimum three (3) years auto/truck maintenance and repair experience. Possess a current Texas Class A or B Commercial Drivers License, with P and S endorsements. Must be able to drive a vehicle with airbrakes. Knowledge of school bus/automotive mechanical components. Ability to work shifts as needed. Ability to use time wisely to ensure proficient and effective operations. Minimum of four (4) ASE Automotive Certifications (Automotive A1-A-8 or Medium/Heavy Duty Truck T1-T6, or School Bus S1-S7) or obtain ASE certifications within 18 months of 18 months of employment, or TASBT Texas Association of School bus Technicians equivalent. Possess and maintain airbrakes certification. Ability to diagnose, troubleshoot and effectively perform repairs for all vehicles. This will include removal/replacement of engines, fuel systems, electrical, and diagnose transmissions (RR). Knowledge of Service Maxx, Diamond Logic builder, Cummins In-site, Mercedes, Detroit, and Alison doc programs. After treatment systems including EGR Valves EGR Coolers, SCR, DPF. DOC and Injector Diagnostics. Turbo Chargers-Cylinder Cutout test-Leak down test-High Pressure pump test-ICP & IPR. Ability to diagnose minor mechanical problems and perform repairs without supervision. Ability to operate tools and equipment involved in vehicle repair. Ability to lift heavy equipment and vehicle parts. Ability to pass alcohol and drug test. Ability to pass required bus driver safety training. Acceptable driving record. Ability to operate a school bus.

Job DescriptionDescription: The Supervisor of Horticulture Trials is responsible for day-to-day maintenance of the research/trials gardens under the direction of the Coordinator of Horticulture Research & Trials. Oversee efficient productivity and timely completion of duties in assigned areas. Physically perform garden labor. Work in all weather conditions. Contribute to team effort. The work week is a Monday-Friday schedule; holiday and weekend schedules may apply. This full-time, regular position is non-exempt. ESSENTIAL JOB DUTIES INCLUDE BUT ARE NOT LIMITED TO: • Physically perform general landscape maintenance, including planting, weeding, watering, fertilizing, doing minor irrigation repairs, pruning, and pest control according to written maintenance and safety standards, • Perform data collection including: rating, labeling, and photographs, • Under the direction of the Trials Manager implement fertilization schedules, • Train and develop gardeners to increase knowledge of plant materials and landscape maintenance practices, • Responsible for securing all equipment at the end of the day and notifying manager of any supply needs, • Handle weekly maintenance of interior plants; reports status to the Trials Manager, • Responsible for unloading trucks, inventory, upkeep, and watering of garden material, • Assist in group activities and special projects as required, • Ability to drive to multiple locations for work duties, • Apply pesticides (when trained) using appropriate safety procedures as provided and according to OSHA standards, • Monitor irrigation system and pump systems (where applicable), repair minor problems, and report malfunctions, • Assist with educational and research projects as required, example: horticultural demonstrations during special events, • Work effectively and maintain a good working relationship with other department staff within the Arboretum Requirements: SKILLS/QUALIFICATIONS: • Ability to identify common pests and weeds, • Good verbal and written communication skills, • Ability to manage multiple tasks through use of effective organizational and time-management skills, • Ability to work flexible hours as needed., • Ability to effectively organize work flow for timely completion and develop staff to work as a team; maintain professional work ethic, • Ability to lift up to 30 lbs.; repetitively bend/stoop, move across property and work in all weather conditions and follow approved safety guidelines, • Texas driver’s license required to operate garden vehicles, • Prior research or trialing experience with emphasis in annual and perennial materials, • Bachelor of Science in Horticulture or related field (may accept Associate’s Degree and three to five years related experience), • Ability to follow DABS safety policies and guidelines, • Texas Certified Pesticide Applicators license preferred, • Light power equipment experience preferred, • Manage multiple tasks at one time with increased attention to detail and accuracy following proper maintenance practices, • Follow schedules and meet deadlines, • Problem solving skills, • Organizational skills, • Work collaboratively and cooperatively with supervisors and staff

Job DescriptionWhat We Offer: Our excellent salary and benefits package includes medical, dental, vision, life insurance, short and long-term disability coverage, education reimbursement, 401(k), performance bonuses, and an employee stock program. Employee Resource Groups and Programs offered include the Young Professionals Group, Women at Wade Trim, Diversity, Equity and Inclusion, Professional Development, Leadership Development, Rotation Program, Mentor Program, Sustainability Program, and Wellness Program. Position Description: We are looking for a Construction Cost Estimator to join our Construction Department to improve infrastructure in either our Detroit, MI, Atlanta, GA or Tampa, FL office. Candidates should have a bachelor's degree in civil engineering, construction management or a related field. Ten or more years of related experience and familiarity with estimation software are required. Typical responsibilities include: • Operational: • Further advance our cost estimating process and systems for development of Engineers Opinion of Construction Cost estimates (EOPCC) and constructability reviews., • Perform, provide guidance and review EOPCC estimates and constructability reviews required for Design., • Train Design Engineers on the development of EOPCC., • Build a team to support EOPCC development and constructability reviews., • Seek out innovative systems, methods and technology that will keep Wade Trim at the forefront of continuous improvement and provide the best solutions for our clients., • Develop and implement plans to apply innovation to the practice and ultimately our clients., • Provide technical guidance to a practice area., • Lead or participate in market segment user group activities identifying technical, training and project management needs, • Provide QA/QC on specialty projects and assigned initiatives, • Research and provide updates to practices covered by their technology, • Mentor/coach selected staff in area of expertise, • Provide technical input on projects and initiatives, • Assist market segment in identifying skill inventory in practice of their expertise, • Provide cross training for skills developed under their practice, • Provide recommendations for standards and protocols in project delivery and deliverable format, • Host brown bag seminars for in-house staff and/or clients, • Review technical paper requests, abstracts and papers• Sales/Business Development:, • Utilize the network to facilitate introductions to Wade Trim and expand the client base., • Provide technical input on sales calls, proposals, and presentations, • Participate in associations within their practice area and volunteer for leadership positions, • Write for technical publications and make presentations at conferences, • Network with industry peers• Corporate:, • Provide technical input on training, equipment, and software, • Research and provide recommendations for most current technical resource needs including software and skills, • Maintain a safe working environmentEducation:, • Bachelor's Degree in Civil Engineering, Construction Management or a related field requiredSkills/Experience:, • 10 years or more of related experience required, • Strong understanding of construction processes, materials and labor costs., • Ability to estimate all types of municipal projects including heavy civil, water treatment, wastewater treatment, pump station, process mechanical, roadway, etc., • Familiar with estimation software and Microsoft Office Suite products, • Ability to read and interpret engineering drawings and specifications and perform constructability reviews., • Able to take concept and schematic drawings and develop a meaningful estimate with detail, • 30 Hr OSHA training is preferred, • Trench and Safety training is preferred, • Valid Driver's License

Job DescriptionUnited Flow Technologies is a platform established in July 2021 to invest in the municipal and industrial water and wastewater market. UFT has partnered with market leading businesses to create a national provider of process, pump, automation & control, and other equipment solutions. And we’re just getting started making strategic partnerships to provide clean water across the country! United Flow Technologies is hiring an AR/AP Specialist. This role requires working in our Irving, TX office Monday-Friday. AR Responsibilities: • Process and post incoming customer payments accurately and promptly., • Review and reconcile customer accounts to resolve discrepancies or billing issues., • Monitor and follow up on outstanding invoices, ensuring timely collections., • Prepare and send regular statements to customers to facilitate collections., • Communicate with customers regarding payment status, payment terms, and outstanding balances., • Collaborate with sales and sales support teams to address customer inquiries or disputes., • Maintain accurate and up-to-date records of customer transactions and interactions., • Assist in the analysis of accounts receivable data and aging reports. AP Responsibilities:, • Verify and process incoming vendor invoices, matching them with purchase orders and any relevant receiving documents., • Ensure proper coding and approval of invoices in accordance with company policy., • Prepare and execute payments to vendors through checks, ACH/Wire, or other approved methods., • Reconcile vendor statements and resolve discrepancies in a timely manner., • Assist with the preparation of 1099 forms and other relevant tax-related documents., • Maintain organized and accessible records of vendor transactions and interactions., • Assist in the analysis of accounts payable data and aging reports. General Financial Responsibilities:, • Assist in month-end and year-end closing processes related to AR and AP., • Support the preparation of financial reports and contribute to financial analysis as needed., • Ensure compliance with company policies, procedures, and accounting standards., • Participate in external audits, providing necessary documentation and explanations., • Continuously identify opportunities for process improvement and efficiency in AR and AP functions. Background/Experience:, • Bachelor's degree in Accounting, Finance, or related field a plus., • 2+ years of experience in accounts receivable and accounts payable functions., • Strong understanding of accounting principles and financial processes., • Proficiency in using accounting software and ERP systems (e.g., QuickBooks, Netsuite, QuickBase) is preferred., • Excellent analytical and problem-solving skills with attention to detail., • Effective communication and interpersonal abilities to interact with customers and vendors., • Strong organizational skills and ability to meet deadlines in a fast-paced environment., • Comfortable working on-site Monday- Friday in our Irving, TX location., • This role may require up to 10% travel within the US. We are manufacturers’ representatives, partnering with leading equipment providers to provide world class products, efficient solutions, and valuable services to municipalities and industrial customers across the United States.

Job Description The Business Development Leader- DFW North position is a dynamic, high-energy outside sales representative, responsible for growing new and existing accounts which use hygienic fluid handling components and equipment. The primary responsibility is to grow market share among customers in a specific region of Texas. Specific customer segments include: • Food, Dairy, Beverage, and Pharmaceutical Manufacturers, • OEM and Fabricators, • Pumps, Valves, Heat Exchangers, Instrumentation, Tank Cleaning, • Spare Parts, • Pipe, Tubing, Fittings, Hanging components, • Service opportunities for Valves, Plate Heat Exchangers, and high-speed separators, • Pump Repair and Remanufacturing, • The territory focuses on customers in the Southern DFW area, primarily South of Highway 20, to Temple., • Notable cities in the territory include Corsicana, Brownwood, Burleson, Stephenville, Abilene, Waco, Tyler, Temple, and Palestine. Sales Activities • Target Processors, resellers, and OEMs in all hygienic industries, in the assigned geography., • Generate year-over-year growth in the distributed products and service categories., • Speak into CSI’s sales strategy and value proposition by identifying industry trends and shifts in target markets., • Promote CSI eCommerce usage and speak into opportunities to improve the store., • Responsible for proactive calls, prompt lead follow-up, and communication to promote CSI products and develop positive business relationships for CSI., • Adopt, maintain, and propagate a philosophy of accountability for CSI sales functions., • Provide leadership to support team members by exhibiting professional and ethical conduct as well as a strong work ethic., • Build relationships between people at CSI and people at the customer or prospect company., • Prospect under-served geographies and provide business intelligence to the Sales Manager- Texas for the purpose of supporting the long-term regional strategy., • Develop and nurture relationships with CSI support personnel to further grow awareness and revenue. Examples of support personnel and their roles:, • CSR – quoting and order entry, • Project Management & Estimating- Site Services, Fabrication, • Marketing and sales support, • Accounting, • Purchasing, • Executive team, • OEM & vendor personnel CSI employees are engaged daily in the company’s culture, committed to our core values, and have a passion for excellence to successfully drive and support the company’s goals, vision, and mission. We take care of each other and do what we say we’ll do. About CSI: CSI provides state-of-the-art stainless-steel process equipment and service for the food, dairy, beverage, pharmaceutical, and personal care industries. We are a growing company with a passion for providing superior customer service. Our work environment is rooted in respect, teamwork, continual learning, and growth... with a large dose of community and fun! We believe our employees are our greatest resource and are committed to investing in our team. Which is why we offer employees the possibility of free monthly healthcare premiums, paid time off, retirement planning, on-going personal development and more! If it wasn’t already obvious, we also value fun and community! Which is why we strive to create an enjoyable and positive work environment – hosting company BBQs, bringing in local food trucks, casual Fridays, wellness programs, and even encouraging our team to invest and volunteer in our local community. We’re looking for fun and energetic candidates that want to join our growing family and ensure our customers delight in CSI. If this sounds like you, what are you waiting for? Apply now! Salary + Commission: Starting at $125K Primary Functions • Contribute to overall vision of increased sales through accountability and relationship management - daily, • Learn characteristics, including specific market, of each customer to determine what products and solutions have the most potential - ongoing, • Proactively identify, question, and suggest changes to standard procedures - ongoing, • Make systematic and efficient sales visits to customers and prospects at their plant and corporate locations - ongoing, • Formulate, write and implement a business plan stating goals and sales strategies to achieve those goals – quarterly, • Maintain an up-to-date cookbook with core tactics and responsibilities - weekly, • Develop rapport with, and delegate appropriate tasks to, assigned inside sales representatives, technical consultants, project managers, and estimators - ongoing, • Respond to customer requests for information - daily, • Communicate special customer needs to customer service, special alloys and design in organized and well documented manner - daily, • Enter notes in CRM, per procedure, to document all completed and scheduled activities - daily, • Understand and follow established procedures for sales, project management, purchasing, and returns - daily, • Submit activity report per procedure - ongoing, • Communicate strategic plan and progress to Sales Manager – Texas - monthly, • Maintain major projects list showing jobs being pursued and their status. - monthly, • Maintain a positive relationship with personnel for equipment manufacturers - ongoing Education/Training: • Equipment sales experience in food and/or pharmaceutical industries, • Exposure to estimating design and application of process equipment, • Experience with sales management, • Proficiency in computer OS and MS Office Suite, • Valid Driver's License, • Ability to travel to customer locations, • Clean driving record This position requires the ability to interact with employees and customers verbally and in writing, remain in a stationary position for 80% of the workday, have close visual acuity, and constantly operate a computer and other office productivity equipment, such as a phone, copy/fax/scan machine, computer keyboard and mouse with or without reasonable accommodation. This position also requires the ability to occasionally lift, stoop, bend, and lift product, materials, and supplies, up to 30 pounds. CSI has a long standing policy of Equal Opportunity in employment. Our practice is to fill positions by selecting applicants who can perform the work in a competent and professional manner. We do not discriminate on the basis of age, sex, race, color, religion, national origin, sexual orientation, gender identity, protected veteran status, or individuals with disability. U.S. federal law requires completion of employment eligibility verification upon hire. CSI participates in E-Verify. Must have the right to work in the United States.

Job Description Job Summary We are seeking Commercial vehicle drivers to deliver various grades of gasoline to local business fleets, establishments with generators and other equipment, office parks, Marinas to fill boats, and residential customers. All routes are local. Drivers never go further than 100 miles from the terminal. The starting rate is $28 with an increase to $28.50 at 90 days, Drivers also earn a quarterly incentive bonus based on the number of gallons they deliver, as well as customer tips. Benefits include medical insurance for the Driver and qualified dependents with coverage in effect at 30 days of employment, 401K with a matching contribution up to 4%, PTO time accrual beginning at 90 days, and Uniform reimbursement for Drivers. The Duties and Responsibilities of the Driver Position include but are not limited to: • Drive company-owned commercial vehicles with various grades of gasoline., • Directly pump gas from tanker to customer vehicle/asset., • Ensure safety and the best practices are always followed., • Maintain regular communication with logistics coordinators., • Follows all route guidance., • Completes required safety pre and post inspections., • Utilize company technology to accurately manage fuel inventory and customer delivery requirements., • Complies with all state and local DOT laws., • Fills tankers with needed fuel for delivery., • Other duties as assigned. Job Requirements • Valid CDL A or B, • Minimum 2 years of commercial driving experience., • Hazmat endorsement for at least 1 year., • Tanker endorsement for at least 1 year,, • Preference for candidates who have completed a formal driving training program or attended driver training school., • No major violations (reckless driving, fleeing the scene, accident resulting in serious injury or death, speeds greater than 20 mph in a given zone, drug or alcohol related)., • Pass background checks including Motor Vehicle Report., • Clear a pre-employment drug screening., • No more than 3 moving violations in the prior 36-month period., • Team players demonstrate flexibility., • Provide excellent customer service., • Some weekend availability. Physical requirements • Must be able to get in and out of the truck multiple times per shift., • Must be able to carry hoses weighing up to 50 lbs., • Must be able to climb ladders.