Trabajos pump en San Francisco, CaliforniaCrear alertas

Job Description Join our Team at the Department of Veterans VA Medical Center, San Francisco, CA as a Physician Anesthesiologist! The San Francisco Veterans Affairs Medical Center (SFVAMC) Anesthesiology Service requires an Anesthesiologist to Manage adult patients many with multiple co-existing disease, rendered unconscious or insensible to pain and emotional stress during surgical and certain other medical procedures; including preoperative, intraoperatlve and postoperative evaluation and treatment; the support of life functions and vital organs under the stress of anesthetic, surgical and other medical procedures; medical management and consultation in pain management and critical care medicine, direct resuscitation in the care of patients with cardiac or respiratory emergencies, including the need for artificial ventilation, pulmonary care, supervision of patients In post-anesthesia care units and critically Ill patients In special care units. The major duties and responsibilities include, but are not limited to: Assessment of, consultation for, and preparation of patients for anesthesia including performance of history and physical examination Medical management of patients during the peri-operative period who are under physical and emotional stress Management of post anesthetic recovery including procedural pain Supervise and administer general anesthesia, regional, monitored anesthesia, pre and postoperative care, acute and chronic pain. Place, manage, and utilize invasive monitors and lines including but not limited to arterial lines, central venous catheters, pulmonary artery catheters, epidurals, spinal catheters and drains, infusions, etc. Management of anesthesia for implantation, removal, replacement, and repair of pacemakers, cardioversion devices, deep brain stimulators, and other neuro and muscular stimulators and devices. Must also be able to train medical students, student nurse anesthetists, and residents at all levels of experience. Special considerations will be given to candidates who are diplomates of subspecialty boards of Anesthesiology including: Critical Care Anesthesiology: Serve as consultants in the intensive care unit or as the primary attending depending on training, experience, board certification, and credentialling. Cardiothoracic Anesthesiology: Management of cases which require or may require cardiopulmonary bypass, includes anesthesia for coronary artery surgery, valve surgery, "off pump CABG", and non-cardiac major vascular surgery requiring cardiopulmonary bypass. manage minimally invasive cardiology cases for transcutaneous aortic valve replacement, mitral valve procedures, watchman procedures, pacemaker and implanted defibrillator implantation and removal. Additional Requirement: Board Certified or Board Eligible in Anesthesiology. Preferred Experience: Must be fellowship trained or other experience may be considered as determined by the Chief, Anesthesia Service. Advanced Cardiac Life Support (ACLS) certification is required Benefits and Features Expected Salary Range from $350K - $400K (negotiable based on candidate's qualifications, credentials and experience) Recruitment Incentive (Sign-on Bonus): Authorized. Education Debt Reduction Program (Student Loan Repayment): Authorized Work Schedule: Full-time. Schedule will be determined by supervisor Pay: Competitive salary, annual performance bonus, regular salary increases Paid Time Off: 50-55 days of paid time off per year (26 days of annual leave, 13 days of sick leave, 11 paid Federal holidays per year and possible 5 day paid absence for CME) Retirement: Traditional federal pension (5 years vesting) and federal 401K with up to 5% in contributions by VA Insurance: Federal health/vision/dental/term life/long-term care (many federal insurance programs can be carried into retirement) Licensure: 1 full and unrestricted license from any US State or territory CME: Possible $1,000 per year reimbursement (must be full-time with board certification) Malpractice: Free liability protection with tail coverage provided Contract: No Physician Employment Contract and no significant restriction on moonlighting We encourage you to consider VA employment in San Francisco, CA. We offer both a mission you can put your heart into and a home for fun, new experiences. Join a team that values a healthy home/work life balance and be rewarded by your role in keeping the promise to those who served.

Lead in Pediatric Rehabilitation / Academic Excellence and Cutting-Edge Care at UCSF The UCSF Department of Orthopedic Surgery seeks a board-eligible or board-certified Pediatric Physiatrist with expertise in neuromuscular care: Spina Bifida, Cerebral Palsy, chemodenervation, Intrathecal Baclofen Pump management, and electrodiagnostics in an academic or multispecialty setting. The role includes clinical care, teaching, and research at UCSF Benioff Children s Hospital Oakland and Mission Bay. Responsibilities include collaborating on research, publishing in peer-reviewed journals, and educating residents, fellows, and medical students. Why UCSF? Nationally recognized program, offering mentorship and collaboration rarely found elsewhere. Multidisciplinary care across inpatient and outpatient settings, integrated with Orthopedics, Neurology, Neurosurgery, and therapy services. Academic runway and strong UCSF infrastructure for research and QI. Established reputation and community impact through decades of service at Oakland and San Francisco sites, caring for diverse, high-acuity pediatric population What We re Looking For: Board-certified or board-eligible in Pediatric Rehabilitation Medicine (or equivalent pediatric-heavy PM&R training). Clinical expertise in spasticity management, including botulinum toxin and chemoneurolysis; ultrasound-guided procedures preferred. Strong EMG/NCS skills or willingness to deepen competency with on-the-job training. Ability to provide care across inpatient and outpatient settings, with interest in complex pediatric conditions Demonstrated commitment to teaching and academic engagement, with interest in research, QI, and program development What We Offer: Faculty appointment in the UCSF School of Medicine (rank and step commensurate with experience). Competitive compensation and UC benefits, including pension and health coverage. Access to premier facilities, cutting-edge technologies, and UCSF s integrated health system. A culture of innovation, teamwork, and academic excellence. Opportunities to grow in leadership, education, and research. Why Live & Work in San Francisco? Vibrant Neighborhoods From the charm of Noe Valley and Alamo Square s Victorians to the waterfront buzz of the Embarcadero, San Francisco offers distinct communities with their own parks, cafes, and character. Dynamic Culture A city alive with art, music, and diversity, San Francisco celebrates inclusivity through festivals, public art, and a thriving creative scene. Access to Nature Minutes from beaches, redwoods, and Golden Gate Park, with Napa Valley and Marin trails just a short drive away. Exceptional Food Scene Home to Michelin-star dining, farmers markets, and global flavors from Chinatown to the Mission all defined by fresh, coastal ingredients. Connected & Convenient Quick access to Berkeley, Silicon Valley, and Oakland via BART, ferry, or car; SFO offers nonstop flights worldwide. City of Inspiration Known as The City by the Bay, San Francisco embodies creativity, resilience, and purpose where people come to make an impact. Requirements: Applicants must have all requirements met by time of hire. Must have a valid California medical license. MD or DO degree from an accredited program. Completed an accredited Physical Medicine and Rehabilitation Residency Program. Completed an accredited Pediatric Residency Program or Pediatric Rehabilitation Fellowship. Board certified or eligible in Physical Medicine and Rehabilitation and/or Pediatric Rehabilitation and/or Pediatric Medicine. Applicant s materials must list (pending) qualifications upon submission. Join Us at UCSF Health Have a conversation before you apply: Contact Sr Recruiter, Victoria Hill Book time with Victoria Hill The posted UC salary scales set the minimum pay, determined by academic rank and step at the time of appointment. See Table 5 . The minimum base salary range for this position is $149,700. This position is governed by the UC Health Sciences Compensation Plan, APM-670 ( ), which allows for eligibility for negotiated additional compensation. As such, the total negotiated salary (including base and negotiated components) can be significantly higher and can range up to $900,000, depending on individual qualifications, clinical productivity, and other factors assessed at the time of offer. Application Requirements Document requirements Curriculum Vitae - CV must clearly list current and/or pending qualifications (e.g. board eligibility/certification, medical licensure, etc.). Cover Letter Statement of Research Statement of Teaching Reference requirements 3 required (contact information only) About UC San Francisco As a University employee, you will be required to comply with all applicable University policies and/or collective bargaining agreements, as may be amended from time to time. Federal, state, or local government directives may impose additional requirements. The University of California is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, protected veteran status, or other protected status under state or federal law. UCSF is committed to welcoming and serving all people, honoring the dignity of every individual without preference or prejudice, in support of its public mission and in alignment with our PRIDE values and Principles of Community. As a condition of employment, the finalist will be required to disclose if they are subject to any final administrative or judicial decisions within the last seven years determining that they committed any misconduct. Misconduct means any violation of the policies or laws governing conduct at the applicant s previous place of employment, including, but not limited to, violations of policies or laws prohibiting sexual harassment, sexual assault, or other forms of harassment, or discrimination, as defined by the employer. • UC Sexual Violence and Sexual Harassment Policy • UC Anti-Discrimination Policy • APM - 035: Affirmative Action and Nondiscrimination in Employment Job location San Francisco, CA and Oakland, CA

Who We Are: Aurelius Systems is a VC-backed defense tech startup building autonomous, edge-deployed robotics systems using directed energy for counter-UAS. We build laser weapons to shoot down drones. We're a small team of ~10 engineers, former US military operators, and subject matter experts scaling America's directed energy dominance. The first cost effective, reliable and robust laser weapon system. In addition to our San Francisco lab/office, we opened our Detroit manufacturing hub and we field test weekly on our own 400-acre private range. The Role & Your Impact: We need a Laser Engineer who has actually built fiber laser systems. You'll own the laser source from fiber to beam. That means designing, building, and field-testing the high-power fiber laser systems that put energy on target. You'll work across the full optical chain (pump diodes, fiber combiners, gain fibers, beam delivery optics) and make it all survive real-world conditions. This isn't a role where you write papers about pulse dynamics or maintain someone else's laser. You'll splice fiber, align optics, troubleshoot thermal issues in the field, and watch your system destroy a drone. The feedback loop between your bench and the test range is days, not weeks. What You'll Own: • Design and build high-power fiber laser systems from pump architectures, gain stages, and fiber combiners to beam delivery optics, • Perform fusion splicing, fiber preparation, and connector termination for high-power fiber assemblies, • Architect thermal management solutions like heat sinking, active cooling, and thermal modeling to maintain beam quality under sustained operation, • Develop and optimize beam delivery and beam combining systems for maximum power-on-target, • Select and integrate pump diodes, gain fibers (Yb, Er, Tm), fiber Bragg gratings, and passive optical components, • Drive hands-on prototyping, assembly, alignment, and field testing on our range, • Characterize laser performance like output power, beam quality (M²), spectral stability, and thermal behavior under operational conditions, • Perform optical simulations to optimize designs before you build (Zemax, MATLAB, COMSOL, or equivalent), • Design for manufacturability and ruggedization. Our systems must survive transport, vibration, and harsh field environments, • Integrate laser systems with power electronics, perception, and control subsystems, • Generate schematics, BOMs, test procedures, and documentation meeting MIL-STD and ITAR requirements What We're Looking For: • 2–10+ years building fiber laser systems or high-power fiber-based optical systems, • Direct hands-on experience with fusion splicing, fiber preparation, and high-power fiber assembly, • Deep understanding of fiber laser physics, from stimulated emission, nonlinear effects (SBS, SRS), thermal lensing, and how they limit real systems, • Experience selecting and integrating pump diodes, gain fibers, couplers, isolators, and fiber Bragg gratings, • Proficient with optical test equipment (power meters, beam profilers, OSAs, and thermal cameras), • Comfort with optical simulation tools (Zemax, MATLAB, RP Fiber Power, COMSOL, or equivalent), • Familiarity with beam combining approaches (spectral, coherent, or incoherent) is a strong plus Where you probably come from: Fiber laser companies (IPG, nLIGHT, Lumentum, TRUMPF), directed energy programs (Lockheed, Northrop, Raytheon HEL), university laser labs that build high-power fiber systems (CREOL, Wyant, MIT Lincoln Lab), or photonics startups where you were hands-on with fiber laser builds. Not a fit if: Your experience is primarily using commercial lasers as tools (laser machining, laser scanning, lidar integration), semiconductor laser fabrication in a cleanroom, or free-space solid-state laser design without fiber experience. Nice-to-Haves: • Experience with directed energy weapon systems or defense laser programs, • Background in spectral or coherent beam combining for power scaling, • Familiarity with MIL-STD standards and ITAR compliance, • Experience with ruggedized optical system deployment in harsh environments, • Active security clearance or ability to obtain one, • Experience with laser safety protocols and high-power laser operations Education: BS, MS, or PhD in Optical Engineering, Photonics, Physics, Electrical Engineering, or related field. What you've built matters more than where you went to school. How You Operate: • Extreme bias for action. You'd rather build a prototype tomorrow than model it for a month, • Rigorous testing mindset. You characterize your own systems before the field does, • Comfortable with ambiguity and fast, constantly iterating in a startup environment, • Your brain only releases dopamine when you're building, • You debug from first principles, not Stack Overflow, • Clear communicator across mechanical, electrical, optical, and ML teams, • Self-directed. You identify what needs to happen next and do it without being told Why Join Aurelius Systems? • Build more in 1 month than most engineers build in 1 year. We field test weekly. Your work goes downrange, not into a filing cabinet., • Career velocity is real. Erick Brito went from Founding Robotics Engineer to Lead in 12 months. At ~10 engineers, there are no layers between you and impact… or between you and your next title., • Work on a problem that actually matters. Small, cheap drones are changing warfare. Our laser systems are the asymmetric answer. Think infinite magazine, cost-per-shot near zero, scalable to every base, border, facility, truck and infrastructure., • Join the densest defense startup ecosystem in the country. California is where the next generation of defense companies are being built. You'll be in the room with the people reshaping how America builds weapons. How we work: Core hours are Monday–Friday, 9 to 6. When we're sprinting toward a demo or field test, the team ramps up… nights, weekends, whatever it takes to ship. When the sprint lands, we ramp down. We don't manufacture intensity for show. We go hard when the mission demands it, and we recover when it doesn't. If you've worked at SpaceX, against a mission-critical timeline, or on a racing team, you already know the rhythm. Benefits: • Competitive salary + equity, • United Health Care medical, dental, and vision coverage, • Flexible 18 days PTO + 5 sick days, • Travel to field test events and range days, • Covered daily lunches and office snacks + drinks, • E-bike / scooter stipend ( Up to $500), • Direct access to leadership and real ownership over your work Export Control Notice: This role requires access to export-controlled information or items that require "U.S. Person" status. As defined by U.S. law, individuals who are any one of the following are considered to be a "U.S. Person": (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3). Don't Check Every Box? Even if you don't meet every qualification listed, we encourage you to apply. At Aurelius Systems, we value diverse perspectives and are always looking for talented engineers with unconventional backgrounds. If you've done hard, hands-on technical work and you're hungry to work on something that matters reach out to our Head of Talent,

We are looking for highly competent, driven, team-oriented individuals who enjoy tackling unique and challenging projects. Anvil’s commitment to Safety, Teamwork, Grit, Best-in-Class performance, and Fun is evident throughout every aspect of the company. Founded by a purple heart veteran we continue to support our service members and honor the skillset and experience they add to the team. Anvil Builders is a dynamic general contracting and civil engineering firm boasting a diverse scope of capabilities ranging from water/ waste-water, mechanical pump station, structural concrete, electrical, aviation, temp services, disaster response/ clean up, and much more. We work in both the public and private sectors delivering the highest quality outcomes to the client. We are proud to contribute to the communities we work and live in. The Senior Project Manager/ Electrical Estimator will be responsible for heading estimating for all heavy civil electrical work. They shall leverage strong relationships with subcontractors and suppliers; negotiate prices and organize bids for submission. Champion seamless transition to project management team. A strong candidate should exhibit creative problem solving, exceptional time management to meet deadlines, ability to accurately read and understand plans and specs. Anvil offers generous benefits such as: • Medical coverage- medical, dental, vision, and LTD, • Flexible paid time off, • Parental/ Family leave, • 401k enrollment and % matching contributions, • Profit sharing, • Tuition reimbursement, • Company Vehicle, • Gas card, • Cell phone/ Cell phone reimbursement, • Gym membership reimbursement Primary Responsibilities: • Prepares and maintains comprehensive estimates, budgets, and schedules for a variety of projects. Allowances for the waste of materials, inclement weather, shipping delays, and other factors that may increase costs must be incorporated in the estimate, • Assists in determining necessary resources for projects based on cost estimates and budgetary constraints, • Assess existing site conditions such as access to and availability of electricity, water, and other services, as well as on surface topography and drainage, • Review all Scopes of Work, proposal specifications, drawings and photographs, to ensure compliance with building code requirements; clarity of information; consistency between area details and descriptions; and accuracy of quantities and items selected, • Participate in preliminary project review meetings to discuss project details, client background and prevention of future challenges, • Provides continuous project estimating and schedule reviews throughout the project, • Foster effective working relationships with Trades, project consultants and team members at all levels of the organization Required Experience / Skills: • Bachelor’s Degree in construction management, engineering, architectural engineering, or related discipline. 10+ years of Estimating experience. Familiarity with Excel, HCSS, and HeavyBid, preferred. Powered by JazzHR mPHuewebSE

Role: HVAC Sales Specialist Location: US Bay Area, hybrid with travel Salary: $70-95k + commission + package We are partnering with a leading clean energy provider delivering high-impact renewable solutions to residential customers. Role Overview: This role focuses on selling residential heating and cooling systems, including heat pumps. You will work closely with technical teams, contribute to business development, and support customers throughout the sales process. Key Responsibilities: • Sell residential heat pump HVAC systems and educate customers on benefits., • Conduct technical consultations, design solutions, and present proposals in person, via phone, and email., • Work with internal HVAC managers and project teams to ensure seamless installations., • Generate new business through outreach to existing contacts, networking, and events., • Maintain up-to-date knowledge on rebates, policies, technical equipment, and market trends., • Track, document, and report on projects using internal systems and software. Requirements: • Proven HVAC experience, ideally in heat pump or mini split systems., • Strong verbal and written communication skills., • Highly organised with the ability to manage multiple projects and document progress., • Self-motivated, accountable, and driven to achieve sales targets. If this role is of interest, please apply directly or reach out to

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Company car, • Company parties, • Employee discounts, • Free food & snacks, • Free uniforms, • Health insurance, • Opportunity for advancement, • Training & development San Francisco, CA | Full-Time (Must reside within 25-mile radius of 94124) Cabrillo Plumbing, Heating and Air (The Service You Expect, The Quality You Deserve) is looking for an experienced Lead HVAC Service Technician to join our top-notch service department. If you excel at troubleshooting and repair, thrive on service calls, and want to grow with a company that values your expertise and attitude, read on! What We Offer Competitive pay: $80,000 $100,000+ per year (DOE) Full benefits: Medical, dental & vision insurance Time off: Paid holidays and PTO Tools of the trade: Company-issued iPhone, iPad, uniforms & truck Training & growth: Ongoing manufacturer schools, career-path development Monthly spiffs & bonuses: Rewarding top performers with extra cash incentives What Were Looking For Experience: Minimum 5 years of residential service-call work on furnaces & A/C systems Certifications: EPA 608 Type II Certification (minimum) Technical requirements: Deep familiarity with all major brands (Trane, Carrier, Lennox, Goodman, etc.) Strong expertise in Mitsubishi heat pump diagnostics, controls & repairs Professional skills: Sharp problem-solver with keen attention to detail Team player with a positive attitude and excellent customer-service mindset Clear communicatorboth with homeowners and team members Valid CA drivers license with clean record Why Cabrillo? At Cabrillo, we exceed expectations by investing in you: Supportive, family-first culture Stable, long-term career opportunities Manufacturer-backed training to keep your skills cutting-edge Apply today and take your HVAC career to the next level! Click here to our website

Job DescriptionDescription: Company Overview: AHT Cooling Systems USA, a recognized leader in refrigeration solutions for the grocery and convenience store industry, is currently seeking experienced Commercial Refrigeration Technicians to join our team. This role supports installation and repair services in the San Francisco, CA area, as well as locations within a 3-hour radius. This role offers competitive 1099 contractor pay of $3,900 per week, providing strong earning potential for highly skilled professionals. If you’re a skilled technician looking to work with a company known for innovation and reliability, we would love to hear from you! Position Summary: In this role, you will provide advanced support for customer warranty and non-warranty technical needs across all AHT product lines and services. You will also be responsible for resolving complex technical product issues and acting as a liaison to Product Management for matters related to design and application improvements. As a 1099 contractor, you will perform installations, diagnostics, and repairs on commercial refrigeration units at customer locations. This role requires a high level of technical expertise, professionalism, and the ability to work independently while representing AHT’s commitment to quality and service. Responsibilities Include: • Maintain advanced proficiency in all products and services that the company offers. This includes installation, programming, and equipment protocol, • Maintain advanced proficiency in all designated third-party products and services, • Troubleshoot and repair Heat Pump issues, achieving minimal downtime, • Develop work instructions and technical product documentation for AHT and third-party products and services provided by AHT, • Knowledgebase submittals for reference, • Review Customer Service project scopes, store prints, diagrams, and specifications for accountability and advanced application of equipment, • Evaluate and specify alternative components, • Work with contractors to review and ensure store meets operational standards, • Outline, develop, and implement technical training modules for internal and external use including metrics to track progress and participation with pass/fail analysis and certification protocol, • System CX with modifications and/or software and parameter suggestions for efficient operation of assigned products, • Perform/manage system energy analysis for optimal operation, • Associate’s (AA) degree or equivalent from a two-year college or technical school or equivalent combination of education and experience, • 5-7 years of related HVAC/R experience and/or training with HFC & Co2. R290 experience is a plus Special Requirements: • Certified in the use and handling of refrigerants preferred, • Ability to read, understand and use assembly drawings, wiring diagrams; capable of troubleshooting, testing and repairing electromechanical components, • Understands and can take necessary ESD precautions with sensitive electronic hardware, • Familiarity with various hand tools, refrigeration tools including pumps for evacuation and glycol, and standard tools for use in supermarket maintenance, • Ability to use computer and software tools used to adjust parameters and diagnosis, • Familiarity with MS Office programs to include: Word, Excel, and IBM Notes email programs is required, • Experience with SAP a plus, • Must be available to work different schedules on a daily basis as determined by the availability demands of our clients, • Up to 90% overnight travel is required, • Valid Driver’s license in state of residency is required, • Proven experience in commercial refrigeration service and installation, • Strong problem-solving and customer service skills, • Reliable transportation and valid driver’s license, • Ability to travel throughout assigned Florida regions, • 1099 independent contractor status, • Exposed to moving mechanical parts, outside weather conditions, extreme cold, extreme heat, and risk of electrical shock: 5% of the time, • Exposed to wet and/or humid conditions, high precarious places, fumes or airborne particles, and vibration: 5% of the time, • Must be able to stand/walk/move about specific work area: 25% of the time, • Must be able to bend/reach/twist/stoop: 10% of the time, • Must be able to lift up to 10lbs on a frequent basis: 25% of the time, • Must be able to lift over 25lbs on an infrequent basis: 5% of the time, • Must be able to work and operate a computer: 85% of the time, • Vision is required to analyze and process work; and to work on computers and other office equipment

Job DescriptionHVAC LEAD INSTALLER MINIMUM 5+ YEARS RESIDENTIAL Cabrillo Plumbing, Heating and Air NOW HIRING: LEAD HVAC INSTALLER - $80K-$100K+ San Francisco to Palo Alto, CA | Full-Time Cabrillo Plumbing, Heating & Air is looking for a skilled and motivated Lead HVAC Installer to join our premier residential installation team! If you have 5+ years of experience in Mitsubishi and or Fujitsu heat pump and gas furnace installations and want to grow with a company that values your expertise, apply today! What We Offer: Competitive pay: $80,000 - $100,000+ per year (DOE) Full benefits package medical, dental, and vision insurance Paid time off & holidays Company iPhone & iPad Uniforms & company truck provided Ongoing training & career growth opportunities What Were Looking For: 5+ years of HVAC installation experience (residential) Expertise in Mitsubishi heat pumps, zoning, and lineset installation HVAC certification required Strong problem-solving skills & attention to detail Valid CA drivers license (clean record) Why Join Cabrillo? We dont just meet expectationswe exceed them! We provide a supportive team environment, invest in your growth, and offer a stable, long-term career with a company that values your hard work. Apply today and take your HVAC career to the next level! Click here to our website

Join Our Team! Sunbelt Rentals strives to be the customer's first choice in the equipment rental industry. From pumps to scaffolding to general construction tools, we aim to be the only call needed to outfit a job site with the proper equipment. Not only do we offer a vast fleet that ranks among the best in the industry, we pair it all with a friendly and knowledgeable staff. Our employees are our greatest asset, and although we present a comprehensive equipment offering, our expertise and service are what truly distinguish us from the competition. We pride ourselves on investing in our workforce and offer competitive benefits, as well as extensive on-the-job training for all eligible employees. As a highly successful national company, we are constantly looking for talented individuals to support our growth. If you are interested in pursuing a rewardingcareer, we invite you to review our opportunities! Job Description Summary Foreman Are you seeking an entrepreneurial, empowering workplace that allows you to: • Develop a career track, • Leverage your current skills while developing new skills, • Work with an incredible team of people Sunbelt Rentals--the fastest growing rental business in North America--is seeking a Foreman. As a Pump and Power Foreman, you will lead successful projects requiring the set up and tear down labor for Pump & Power equipment, including bypass pumping, special events require generators, power distribution, a/c, and heat, and water restoration projects and disaster response. DUTIES & RESPONSIBILITIES • Leadership - motivating and coaching team members during the project, • Planning - creating a project plan and executing with team members, • Delegation - assign tasks to crew members to successfully accomplish daily goals, • Communication - represent Sunbelt in communicating with the customer and internal resources, • Project Management - create project timelines accurately., • Maintain tools and necessary supplies to successfully complete projects, • Documentation of projects from daily notes, labor logs, progress reports, and all other necessary documentation as part of the protocol for each project, • Assist with cleanliness of shop and yard when not assigned a project, • Assist with deliveries, pick-ups, and every day business when not assigned a project QUALIFICATIONS • Basic Equipment knowledge and troubleshooting - pumps, generators, power distribution, a/c, heater, and shoring, • Strong Mechanical background preferably in a similar industry, • Strong leadership skills with a history of previous success, • Construction background, • Excellent time management skills, • Basic equipment operating skills - forklift, skid loader, etc., • Class A CDL preferred. Base Pay Range: $29.77 - 40.94 Mechanics bringing tools applicable to position; the pay range is $32.00 to $39.00 per hour. Starting rate of pay may vary based on factors including, but not limited to, position offered, location, education, training, and/or experience. Please visit for more information on our benefits and to join our Talent Network. Sunbelt also provides a comprehensive benefits package to its full-time employees. This package includes: * Health, Dental and Vision plans * 401(k) Match * Volunteer time off * Short-term and long-term disability * Accident, Life and Travel insurance, as well as flexible spending * Tuition Reimbursement Options * Employee Assistance Program (EAP) * Length of Service Awards You will become eligible for benefits on the first of the month following 30 days from your start date. Sunbelt offers team members the following paid time off from work, subject to Sunbelt's policies (unless specified in a collective bargaining agreement): * 12-25 vacation days depending on years of service * 5 sick days * 6 holidays * 2 half day holidays * 2 floating holidays * 1 inclusion day * 1 volunteer day Gear up for an exciting career! Sunbelt Rentals supports service members. Veterans encouraged to apply.

Concrete Pump Operator- 60-70+ an hour! San Jose pickup, Bay Area Projects Must have current concrete pump experience with concrete company. Overview Well established concrete contractor is hiring experienced Concrete Pump Operators to support ongoing commercial and public works projects throughout the Bay Area. This role offers top of market pay, consistent hours, and strong long term stability due to a smaller pump team and steady backlog. Compensation • Pay upwards of $70+ per hour depending on experience, • Significant overtime opportunity due to active workload, • Consistent weekly hours, • Union scale and benefits where applicable Location and Schedule • Pump pick up and dispatch from San Jose, • Projects throughout the Bay Area, • Early starts common, flexibility required, • Local work, no long distance travel required Key Responsibilities • Operate concrete pump trucks safely and efficiently, • Coordinate pours with foremen, finishers, and dispatch, • Set up, clean, and maintain pump equipment, • Perform daily inspections and basic maintenance, • Follow all safety procedures and jobsite protocols, • Communicate clearly with crews and site supervision Preferred Experience • Prior concrete pump operating experience required, • Strong understanding of concrete placement and flow, • Experience on commercial, public works, or large scale pours, • Valid CDL required, • Safety focused and dependable Why This Role • Smaller pump team means more hours and less downtime, • Strong pipeline of Bay Area work, • High earning potential for motivated operators, • Long term opportunity with steady projects

Job DescriptionJob Title: Pilot Plant Operator Job Description We are seeking an experienced Plant Operator to manage and maintain our production facility. In this role, you will oversee the daily operations of our pilot-scale production lines, which include high-temperature reactors, vacuum systems, and induction furnaces. Your primary focus will be to drive throughput and uptime while adhering to the highest safety and quality standards. You will also play a vital role as we transition from pilot to commercial production. Responsibilities • Operate and monitor pilot-scale production equipment, including vacuum induction furnaces, tube furnaces up to 1700°ree;C, high-vacuum pump systems, and inert-atmosphere gloveboxes., • Manage production runs from start to finish, including feedstock preparation, reactor charging, process execution, product recovery, and packaging under inert conditions., • Track and log process parameters such as temperature profiles, vacuum levels, gas flows, and cycle times. Flag deviations and make real-time adjustments to stay on specification., • Perform preventive and first-line corrective maintenance on furnaces, vacuum systems, gas delivery, and material handling equipment, and coordinate with engineers on larger repairs., • Prepare samples for analytical testing, including ICP-OES, IGF-O/N, and SEM-EDS. Understand how results feed back into process control., • Operate overhead cranes (2T & 5T), forklifts, and rigging equipment to safely move feedstock, crucibles, and finished products., • Maintain strict housekeeping, chemical hygiene, and safety practices, especially around hot materials, reactive powders, and inert-gas environments., • Support the commissioning and startup of new production lines and equipment as the facility scales., • Collaborate with R&D engineers and technicians on trial runs, process improvements, and scale-up campaigns, providing operator-level insights to improve designs and procedures.Essential Skills, • 3+ years of experience operating pilot-scale or production-scale process equipment in industries such as chemical, metallurgical, or semiconductor., • Strong mechanical aptitude, comfortable with hand and power tools, basic fabrication, and equipment assembly., • Rigorous approach to standard operating procedures (SOPs), batch records, safety protocols, and data logging., • Ability to work rotating or flexible shifts as production demands require., • Comfort working independently and making sound operational decisions in a fast-paced startup environment.Additional Skills & Qualifications, • Experience in pyrometallurgy, electrometallurgy, or rare-earth/specialty metals processing., • Background operating vacuum induction melting furnaces., • OSHA 10/30 or HAZWOPER certification., • A degree or Background in metallurgy, materials science, chemical engineering, or a related field.Work Environment The role requires working in a dynamic production environment where safety and precision are paramount. Operators will be exposed to high-temperature materials and reactive powders, necessitating strict adherence to safety protocols. The position may require rotating or flexible shifts to meet production needs, and the ability to work independently in a fast-paced, innovative startup setting is essential. The dress code includes appropriate personal protective equipment to ensure safety around hot materials and equipment. Job Type & Location This is a Permanent position based out of Alameda, CA. Pay and Benefits The pay range for this position is $90000.00 - $120000.00/yr. Competitive base salary Comprehensive health, dental, and vision insurance Company-provided lunch daily Visa sponsorship available if needed Workplace Type This is a fully onsite position in Alameda,CA. Application Deadline This position is anticipated to close on Apr 13, 2026. Diversity, Equity & Inclusion At Actalent, diversity and inclusion are a bridge towards the equity and success of our people. DE&I is embedded into our culture through: • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Are you an experienced safety professional looking to contribute to a dynamic, growing company? Mountain Cascade, a premier general engineering contractor based in Livermore, California, is seeking a skilled and dedicated Site Safety Representative that has experience working on pump stations. About Us: Mountain Cascade has been a trusted partner in the construction industry for decades, delivering high-quality projects and innovative solutions. We pride ourselves on a collaborative work culture and commitment to excellence. Position Overview: The Site Safety Representative (SSR) will serve as the on-site safety authority for a pump station construction project for the San Francisco Public Utilities Commission during the months of May to September. During months of September to May, the SSR will work on various projects throughout the Bay Area. The SSR must have demonstrated experience with pump station or similarly complex utility infrastructure projects and be capable of adapting safety controls as site conditions, sequencing, and scope evolve. Start Date: May 1, 2026 Responsibilities: • Perform daily inspections of active field work area(s) covering workplace conditions, physical facility safety, and employee work practices. Document of any deficiencies and corrective actions, • Attend required City Representative meetings, • Conduct "toolbox" safety meetings per CAL/OSHA standards and conduct monthly safety committee meetings, • Establish the specific and appropriate levels of protection for each work task and include within the AHAs/JHAs, • Implement and enforce Health and Safety Plan and any other safety plans required for the scope of work Qualifications: (candidates must meet the minimum below for consideration) • Formal documented safety training as required by CAL/OSHA or other state regulations of the following:, • OSHA Training:, • OSHA 30, • Fall protection, • Material Handling, • Confined Space, • First Aid/CPR within the past two (2) years, • Trained (formal, documented training) and experienced in the hazards and complexity of working on a pump station Work Environment • Full-time, on-site construction environment, • Outdoor work conditions with active construction operations, • Regular interaction with field crews, project management, and agency representatives Why Mountain Cascade • Work on critical public infrastructure projects, • Safety-first culture with leadership support Qualified candidates are encouraged to submit a resume highlighting relevant project experience and certifications to

Heavy civil construction project experience involving concrete structures, box culverts, pump stations, water resource/conveyance structures, tunnels, inlets/outlets, or similar. Shimmick is seeking a talented Concrete Superintendent to be based in the greater San Francisco area.

Chat with potential customers, understand their business challenges, and explain how Pump can make their lives easier and save them money.

As an Account Executive at Pump, you'll play a key role in driving our growth by building strong relationships and helping customers understand the real impact of our technology. Engage with prospective customers to understand their business challenges and clearly explain how Pump can streamline ope

Petroleum Pump Operator Job Duties: Control pumping systems to circulate liquids through a refinery. Operate steam or electric-driven pumps to circulate crude, semi processed, and finished petroleum products, wate

We are looking for a Channel Partnerships Manager to lead our GCP strategic alliances and drive joint business outcomes.You will be responsible for building and deepening our engagement with Google Cloud sales, marketing, and product teams, ensuring our solutions thrive in the GCP ecosystem.Own the

A leading healthcare solutions provider in California seeks RN Clinical Educators to deliver peer-to-peer education on medical devices. Successful candidates must have a BSN and an active RN license, with at least 2 years of relevant experience. The role offers a flexible schedule and the opportunit

Heavy Civil Estimator When joining GSW Construction, Inc., you will be a part of a fast-paced construction team that strives for excellence. We are actively seeking an experienced Heavy Civil Estimator. The purpose of this role is to contribute to the success and profitability of projects by providing accurate, timely, and complete estimates. The Estimator will be responsible for calculating the cost of a broad range of projects. The goal is to provide accurate information to help in operations and strategic planning, perform quantity takeoff s, produce proposals, and prepare cost estimates. Job Details: Full-time position ? Benefits: o Salary Employee (Schedule: Full-time with some required travel and weekend availability.) o 401(k) o OE3 Health & Dental Insurance o Paid Vacation o Salary DOE Essential Duties & Responsibilities ? Perform quantity take off s/reach out to potential subcontractors ? Analyze and compile estimate data that impact the cost of labor, materials, equipment requirements, location, and other factors to ensure a high-quality and timely estimate. ? Accurately prepares estimates. Review proposal specifications and drawings to determine scope. Determines the required contents of estimates and evaluates historical data to project man-hour data. • Produce budgets from conceptual and schematic design phases that align with the organization's goals and strategy • Review drawings, specifications, and proposed project site conditions; record findings and solicit input from field operations to include in the final project estimate. ? Analyze alternative solutions and construction methods to increase the competitiveness of the bid. ? Apply mathematical calculations requiring advanced analytical processes to ensure logically estimated costs are accurate. ? Present estimate content in bid reviews with senior management to ensure accuracy and completeness. ? Communicate with owners, subcontractors, and public and private entities to ensure competitiveness. ? Develop and maintain business relationships to increase bid opportunities in the regional market. ? Participate in and lead discussions, catalyzing creative thinking and innovative ideas, and distinguishing a successful estimate. Qualifications & Requirements ? Bachelor's degree in civil engineering, Construction Management, or equivalent experience. ? 5+ years' experience in heavy civil construction, emphasizing underground utilities, sewer/stormwater pump stations, WWTP/WTP work, heavy highway, bridges/concrete structures, and commercial/residential site work arena. ? Proficient in HCSS Heavy Bid ? Negotiated project experience preferred, including technical writing skills. ? Proficiency with all MS Office products (Word, Excel, PowerPoint, etc.) ? Advanced knowledge of civil engineering principles ? Advanced knowledge of construction principles and equipment capabilities ? Excellent interpersonal and communication skills. Specific Job Requirements: ? Knowledge of project management software and estimating software. ? Working knowledge of construction equipment, materials, techniques, and required standards applicable to the discipline. ? Successful completion of a pre-employment drug, alcohol, and background investigation. ? Valid Driver's License. ? Current on all company-required safety training. ? Competence to maintain confidential information and avoid conflicts of interest. ? Adherence to the GSW Employee Handbook. Notice to All Potential Job Candidates GSW Construction, Inc. is proud to be an equal-opportunity workplace. Individuals seeking employment at our company are considered without regard to age, ancestry, color, race, gender (including pregnancy, childbirth, or related medical conditions), gender identity or expression, sexual orientation, genetic information, marital status, medical condition, mental or physical disability, national origin, protected family care or medical leave status, religion, military or veteran status, or any other characteristic protected by federal, state, or local laws. Applicants must be authorized to work in the United States.

ICU, Oncology, ER and/or critical care unit experience of at least 2+ years, experience within past 5 years is preferred. Super-user/ pump education experience desired, but not required. Super-user/pump education experience desired, but not required.

You’ll be the first line of defense for our customers and the voice of the customer to the rest of the team! What You’ll Do Utilize critical thinking skills to diagnose potentially complex problems using tooling or engineering support to resolve Work directly with the support lead on document

Job DescriptionDescription: Serves customers in a fast, efficient, courteous manner. Keeps the store clean, well-stocked, faced and shoppable. Works as a team and supports store management in reaching the store goals. Represents 2Go MSO in a professional manner in all dealings with employees, vendors and customers. Requirements: Major Job Tasks • Accurately operates cash register and monitors gas console. Follows all cash handling procedures involving cash, credit cards, checks, lottery, and drops. Properly and accurately accounts for all sales transactions. Maintains accurate inventory through correct pricing., • Keeps store clean, always stocked and in first class condition. Maintains high cleaning standards including parking lot, restrooms, stockroom, and equipment. Cleans all spills to remove safety hazards., • Acknowledges all customers and provides the highest level of customer service including greeting, suggestive selling, and thanks while maintaining a high degree of professionalism and encouraging customers to return. Assists customers in locating items in the store., • Complies with suggestive selling program. Builds displays to promote customer awareness of sale items and generate additional sales, • Mathematical skill to count, add, subtract, copy, and record figures., • Skill in operating various machines typical in the retail setting, such as cash register, credit card machine, and gas pump console., • Written communication skill to fill out routine forms and records., • Oral communication skill to give, receive, or exchange information with co-workers, customers, and vendors in a courteous and professional manner., • Interpersonal communication skill to work effectively with others in order to coordinate activities and complete assigned tasks., • Ability to read and understand written instructions, memos, and procedure manuals., • Ability to follow specific, step-by-step instructions, standard procedures, and operating guidelines., • Ability to apply common sense understanding to carry out detailed oral and written instructions., • Ability to concentrate on the task being done despite distractions from others., • Ability to identify routine problems and situations that require a decision., • Ability to provide a high level of customer service

Chat with potential customers, understand their business challenges, and explain how Pump can make their lives easier and save them money.

Chat with potential customers, understand their business challenges, and explain how Pump can make their lives easier and save them money.

We're looking for a strategic, technical, and hands-on Customer Success Lead to build and scale the post-sales organization at Pump. In this role, you will lead both our Solutions Architects and Customer Success Managers, ensuring customers experience immediate value, deep product adoption, and long

We’re looking for a Head of Marketing to build and lead the entire marketing function at Pump. About the Role We’re looking for a Head of Marketing to build and lead the entire marketing function at Pump. Own positioning and messaging, crafting narratives that clearly communicate the value of Pu

Job DescriptionAbout PykaPyka’s goal is to provide society with a new form of safe, clean, and cost-effective transportation enabled by autonomous electric aviation. To get there, we’re taking a different approach than most. We're applying our technologies to every industry where autonomous electric aircraft can be useful, starting with the highest value and most dangerous jobs. In doing so, we're building game-changing products manufactured at scale, while perfecting the safety, reliability, and capabilities of our autonomy engine and electric propulsion systems. We design, develop and manufacture an ecosystem of technologies including proprietary flight control software, avionics, high power density motors, motor controllers, batteries, and custom carbon-fiber composite airframes. Today, we supply autonomous electric aircraft for cargo transport and crop protection to real-world customers across four separate continents and have secured industry-first regulatory approvals from the FAA. Our cargo aircraft enables remote connectivity, enhances express delivery networks, and ensures fast and reliable shipping of critical supplies to areas in need. Our crop protection aircraft offers agricultural services providers and farmers an autonomous tool to make aerial application safer, more precise, and less harmful to surrounding environments. Both vehicles are highly economical to operate, easy to deploy, and significantly reduce C02 emissions in their respective industries. What you work on at Pyka makes people’s lives better now and brings the future of electric aviation one step closer each day. Role OverviewPyka is looking for an Electrical Engineer to join our experienced and enthusiastic team of engineers. In this role, you will be responsible for system level and component level design and testing across a wide range of subsystems. Below is a list of current hardware projects that you will contribute to. Your roles and responsibilities will vary significantly from one week to the next.- High power density motor controller (30kW ~ 100kW)- Electronics for airplane spray and pump system- Air data board- Various PCBs to streamline testing of the above hardware Candidates who thrive in fast-paced environments working with a small team will love this role.Responsibilities • Familiar with high power motor controller hardware design (120V, 30 kW). Able to select key components and sensors for the motor controller based on system requirements, • Hands-on experience in embedded system designs and familiarity with writing C or C++ code for microprocessor based embedded systems, • Deep understanding of different motor control algorithms such as field oriented control (FOC), six step control and different modulation schemes such as SPWM (Sinusoidal Pulse Width Modulation) and SVPWM (Space Vector Pulse Width Modulation), • Complete the entire PCBA design cycle including architecture selection, component selection, schematic design, PCB layout, and working with manufacturers, • Test and validate the design to meet performance and reliability requirements, • Work with cross-functional teams (Mechanical Engineering, Software, and Flight Testing) on aircraft integration and system level testing, • Occasional travel (approximately one week every 2-3 months) to customer sites to support new aircraft deployments or EE subsystem debugging, • Write design and testing documentsPreferred Qualifications, • 3-7 years of hands-on experience designing and testing microprocessor based high power motor controller for EVs or electric aircrafts, • Experience designing power electronics systems such as motor controllers, DC-DC converters, and BMS, • Experience designing safety critical systems, considering system redundancy as well as failure mode and effects analysis, • Familiarity with general schematic design and PCB layout tools such as Altium, OrCAD, Allegro, Eagle, KiCad, etc., • Willingness to travel internationally for up to 10% of the time, • An inquisitive attitude with an ability to quickly and deftly research new topics and develop mastery of new subjects, • Excellent written and verbal communication skills; the ideal candidate is not afraid to ask for clarification or give feedback, • We understand that candidates bring different strengths and experiences, and you don’t need to meet every qualification to be considered. If this role excites you, we’d love to learn more about you. You may be a great fit even if your background doesn’t align perfectly with the list.Compensation and Benefits, • $130,000 - 165,000 per year base salary + equity. Compensation will vary depending on location, job-related knowledge, skills, and experience. Salary ranges are subject to change., • Employer-sponsored health, dental and vision insurance, • FSA with employer matching, • 401(k), • Paid holidays, generous PTO, and additional unpaid time off, • Voluntary short-term disability, long-term disability, and life insurance, • Pre-tax commuter benefits

Job Description Project Engineer - W/WW San Francisco, CA About Sherwood Design Engineers Sherwood is a civil and environmental engineering firm that is committed to investing in and embracing people, communities and the environment. Our team has delivered net zero energy and net zero carbon systems, net positive water systems, resilient coastlines, natural resource protection, green streets, living roofs and more for thousands of clients in the region and across the globe. We specialize in sustainable infrastructure, water management strategies, green building design, and systems based solutions for infrastructure and landscapes. Our focus is on the conservation and management of the consumption of all site resources — carbon, energy, water, and waste. We’ve worked on over thirty award-winning projects, and our work has been published locally and internationally. Founded in 2003, our award-winning projects include Hudson Yards in New York (the largest private real estate development in U.S. history), San Francisco Better Streets Plan, Greater New Orleans Urban Water Plan, revitalization of the iconic waterfront Brooklyn Bridge Park, and the 35 square-km Baietan Urban Area Plan in the heart of Guangzhou, China. Our mission is to engineer an environmentally and socially regenerative planet. Will you join us? Role Summary Sherwood is currently seeking a Project Engineer to support our growing, progressive and dynamic civil and environmental engineering firm. The successful candidate will work as an integral part of Sherwood’s Water/Wastewater team, collaborating with engineering disciplines to co-create solutions to a variety of infrastructure challenges. We are seeking an individual who demonstrates a professional skill set in engineering design of water, wastewater and water reuse infrastructure, can work productively as a member of a multidisciplinary team, work independently, and develop clear, evidence-based solutions. This candidate will assist in building and maintaining client relationships, lead technical scopes of work, directing quality management processes to ensure work remains on track, within scope and budget, and developing team members’ strengths. Minimum Skills • Typically 6+ years of industry experience, • Bachelor’s degree in Engineering - Civil and/or Environmental, • Strong water/wastewater technical background, including in-depth knowledge of physical and chemical water and wastewater treatment processes including for water reuse, • Experience developing water and wastewater infrastructure solutions across all project phases including but not limited to conceptual design, detailed design, and construction administration, • Experience preparing technical reports, documentation, and presentations for stakeholders, regulatory agencies, and clients., • Experience in preparing and advancing plan set packages through all project phases including providing redlines for drafter, • Proficient in producing water/wastewater treatment plant designs in AutoCAD, • Experience with water/wastewater process modeling and simulation software (e.g., BioWin, GPS-X), • Familiarity with SCADA systems systems and automated controls for water and wastewater treatment systems, • Experience performing process and hydraulic calculations for water and wastewater treatment plant unit processes, developing cost estimates of treatment plants, generating technical drawings of process units, developing process and instrumentation diagrams (P&IDs), general process layouts, hydraulics and piping diagrams., • Ability to read and interpret technical documents and written information including design documents and drawings, • Experience with operation of treatment plants and/or pilot studies, monitoring, sampling, measurements, analysis and reporting, • Excellent interpersonal and organizational skills for working within a team environment on multiple projects, • Ability to plan, organize, prioritize, multi-task, work independently under general supervision, and exhibit proactivity and good judgment, • Excellent communication and problem-solving skills. Preferred Skills • Experience in a consulting environment, • Ability to collaborate with multidisciplinary teams (civil, mechanical, electrical) to integrate design solutions., • Experience with advanced water treatment technologies (e.g. membrane filtration, UV disinfection), • Knowledge of water, wastewater, and water reuse regulations and permitting processes in California and the United States, • Experience with hydraulic modeling of gravity and pressure pipe networks, • Experience with pump station design, • Experience with cost estimation of water and wastewater infrastructure, • Knowledge and exposure to civil and hydraulic design programs (Civil 3D, PCSWMM, SewerCAD, etc.), • Professional Engineer (PE) license, • Develop and lead high quality, cutting edge sustainable engineering solutions for our clients including process evaluation, facilities planning, engineering design, permitting & compliance, construction administration and operations planning, • Prepares/reviews calculations, design criteria and technical memorandums, • Work across teams and engage subconsultants as needed to develop integrated design solutions, • Implement quality assurance and quality control through all project phases., • Plan, assign, and direct work of design engineers to meet project deliverables, • Contribute to staff development through training and mentoring; appraise performance., • Create and implement innovative design techniques that enhance company productivity of assignments, • Ensure engineering designs are in compliance with current applicable state & local regulations, • Serve as an effective interface between client's project team and consulting team, conveying technical information in a timely and professional manner, • Works independently under general supervision, • Own a part of the firm with ESOP eligibility after one year, • Flexible working - with every other Friday off, • Competitive Health plans, including PPO and HMO options, Dental and Vision plans, • Learning and Development stipend to use as you see fit, • Generous PTO and 8 paid holidays, • Automatic 401k enrollment, • Fun team events, lunches and happy hours to get to know colleagues outside of work The wage range for this role takes into account the wide range of factors that are considered in making compensation decisions, including but not limited to: skill sets; experience and training; licensure and certifications; and other business and organizational needs. At Sherwood Design Engineers, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the current range is $110,000 to $123,000. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. Reasonable accommodations may be made to individuals with disabilities to perform the essential functions. We will consider for employment qualified applicants with arrest and conviction records. Powered by JazzHR RbiayGTBdz

Job Description Senior Engineer - Water/Wastewater CA | GA | NY | CR About Sherwood Design Engineers Sherwood is a civil and environmental engineering firm that is committed to investing in and embracing people, communities and the environment. Our team has delivered net zero energy and net zero carbon systems, net positive water systems, resilient coastlines, natural resource protection, green streets, living roofs and more for thousands of clients in the region and across the globe. We specialize in sustainable infrastructure, water management strategies, green building design, and systems based solutions for infrastructure and landscapes. Our focus is on the conservation and management of the consumption of all site resources — carbon, energy, water, and waste. We’ve worked on over thirty award-winning projects, and our work has been published locally and internationally. Founded in 2003, our award-winning projects include Hudson Yards in New York (the largest private real estate development in U.S. history), San Francisco Better Streets Plan, Greater New Orleans Urban Water Plan, revitalization of the iconic waterfront Brooklyn Bridge Park, and the 35 square-km Baietan Urban Area Plan in the heart of Guangzhou, China. Our mission is to engineer an environmentally and socially regenerative planet. Will you join us? Role Summary Sherwood is currently seeking a Senior Engineer to support our growing, progressive and dynamic civil and environmental engineering firm. The successful candidate will work as an integral part of Sherwood’s Water/Wastewater team, collaborating with engineering disciplines to co-create solutions to a variety of infrastructure challenges. We are seeking an individual who demonstrates a professional skill set in engineering design of water, wastewater and water reuse infrastructure, can work productively as a member of a multidisciplinary team, work independently, and develop clear, evidence-based solutions. This candidate will assist in building and maintaining client relationships, lead technical scopes of work, directing quality management processes to ensure work remains on track, within scope and budget, and developing team members’ strengths. Minimum Skills • Typically 12+ years of industry experience, • Bachelor’s degree in Engineering - Civil and/or Environmental, • Strong water/wastewater technical background, including in-depth knowledge of physical and chemical water and wastewater treatment processes including for water reuse, • Experience developing water and wastewater infrastructure solutions across all project phases including but not limited to conceptual design, detailed design, and construction administration., • Experience preparing technical reports, documentation, and presentations for stakeholders, regulatory agencies, and clients., • Experience in preparing and advancing plan set packages through all project phases including providing redlines for drafter., • Experience with construction administration of water, wastewater, and/or water reuse systems., • Experience performing process and hydraulic calculations for water and wastewater treatment plant unit processes, developing cost estimates of treatment plants, generating technical drawings of process units, developing process and instrumentation diagrams (P&IDs), general process layouts, hydraulics and piping diagrams., • Familiarity with SCADA systems systems and automated controls for water and wastewater treatment systems., • Ability to read and interpret technical documents and written information including design documents and drawings., • Experience with operation of treatment plants and/or pilot studies, monitoring, sampling, measurements, analysis and reporting., • Excellent interpersonal and organizational skills for working within a team environment on multiple projects., • Ability to plan, organize, prioritize, multi-task, work independently under general supervision, and exhibit proactivity and good judgment., • Excellent communication and problem-solving skills. Preferred Skills • Experience in a consulting environment., • Ability to collaborate with multidisciplinary teams (civil, mechanical, electrical) to integrate design solutions., • Experience with advanced water treatment technologies (e.g. membrane filtration, UV disinfection)., • Knowledge of water, wastewater, and water reuse regulations and permitting processes in California and the United States., • Experience with startup & commissioning and operations & maintenance of water, wastewater, and/or water reuse systems., • Experience with hydraulic modeling of gravity and pressure pipe networks., • Experience with pump station design., • Experience with cost estimation of water and wastewater infrastructure., • Familiarity with civil and hydraulic design programs (Civil 3D, PCSWMM, SewerCAD, etc.)., • Familiarity with water/wastewater process modeling and simulation software (e.g., BioWin, GPS-X)., • Professional Engineer (PE) license., • Certifications or other sustainability-oriented accreditation preferred (LEED, Envision, Living Building Challenge, EcoDistricts). Expected Outcomes • Develop and lead high quality, cutting edge sustainable engineering solutions for our clients including process evaluation, facilities planning, engineering design, permitting & compliance, construction administration and operations planning., • Prepares/reviews calculations, design criteria and technical memorandums., • Work across teams and engage subconsultants as needed to develop integrated design solutions., • Implement quality assurance and quality control through all project phases., • Plan, assign, and direct work of design engineers to meet project deliverables., • Contribute to staff development through training and mentoring; appraise performance., • Create and implement innovative design techniques that enhance company productivity of assignments., • Ensure engineering designs are in compliance with current applicable state & local regulations., • Serve as an effective interface between client's project team and consulting team, conveying technical information in a timely and professional manner., • Works independently under general supervision., • Own a part of the firm with ESOP eligibility after one year, • Flexible working - with every other Friday off, • Competitive Health plans, including PPO and HMO options, Dental and Vision plans, • Learning and Development stipend to use as you see fit, • Generous PTO and 8 paid holidays, • Automatic 401k enrollment, • Fun team events, lunches and happy hours to get to know colleagues outside of work The wage range for this role takes into account the wide range of factors that are considered in making compensation decisions, including but not limited to: skill sets; experience and training; licensure and certifications; and other business and organizational needs. At Sherwood Design Engineers, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the current range is $131,000 to $161,000. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. Reasonable accommodations may be made to individuals with disabilities to perform the essential functions. We will consider for employment qualified applicants with arrest and conviction records. Powered by JazzHR RZuwj4JUoF

Job Description:\n\nJob Overview: The General Services Administration (GSA) Public Buildings Service (PBS) manages a diverse real estate portfolio of approximately 1,600 federally owned buildings and 6,500 leased facilities across the U.S. and territories. The real estate portfolio includes federal office buildings, courthouses, land ports of entry, federal campus facilities, laboratories, and warehouses. This position is part of the Facility Risk Management Division (FRMD) of the GSA PBS Office of Facilities Management (OFM). The FRMD is responsible for GSA’s industrial hygiene, environmental compliance, facility safety, and fire protection programs, which help to provide safe and healthy workspaces to federal tenants, occupants, and visitors across GSA’s building portfolio. The Safety and Occupational Health Specialist will be responsible for tasks and projects assigned by the FRMD Director or their designee. In general, the Safety and Occupational Health Specialist will support the overall management of the National Safety and Occupational Health Program. The National Safety and Occupational Health Program includes the following program areas: Based on the needs of the position, occasional travel may be required to conduct field inspections or attend meetings. programs related to their space or to buildings/facilities housing their operations. (3) accidents for which prior analysis of the hazards or development of control and preventive measures have been unsuccessful. Occupational Safety and Health (OSH) compliance, including Construction safetyElectrical safety Fall protection / walk-working surfaces Confined space Occupational health and environmental control (noise, ventilation, non-ionizing radiation) Machinery and machine guarding Personal protective equipment (PPE) Medical surveillance Job hazard analysis Accident prevention and investigation Ammunition and explosives safety Hazardous materials / hazard communication Health and safety audits and risk management surveys Provides expert advice, guidance, troubleshooting and technical assistance to management officials, agency heads, staff members, buildings managers, employees and visitors on all issues related to the diverse range of safety and occupational health matters that arise, including but not limited to, accident investigation, building inspections, policy implementation and interpretation, OSHA regulations, injury reporting and occupational safety, crossing business, divisions and project lines. Using mastery of the OSH programs, serves as a national subject matter expert in matters relating to occupational health and safety matters for GSA. Provides expert advisory and consulting services to employees and managers at all levels in occupational safety and health matters and provides options to resolve the problems presented, many of which are highly complex in nature and impact critical projects or important operating issues. Provides expert advice, guidance and policy interpretation and implementation to improve building safety and reduce and/or prevent accidents and injuries. Implements all national policies and, as necessary, develops national guidance, training or operating procedures to facilitate understanding of this program. Analyzes and maintains all OSH related training information, training needs and develops training/curriculum based on regulatory changes or anticipated program needs to improve or enhance OSH knowledge. Develops, directs and conducts a safety education program to fulfill employee training/continuing education requirements for the diverse GSA workforce engaged in various aspects of the Agency's business. Develops and delivers training in building operations and construction safety for GSA, that are accepted for continuing education credits for GSA employees. Participates in accident investigations in GSA controlled facilities when potentially hazardous or unknown substances are involved. Operates as a national expert and resource to develop or revise policy, address new OSHA regulations or proposed legislation which could impact GSA mission accomplishment, troubleshoot unprecedented safety situations, research and resolve the most complex safety problems facing GSA nationwide through collaboration and use of expert of analytical skills, and share best practices. Manages, plans, develops, coordinates, and administers the internal GSA employee OSH program elements such as OSH inspections, record keeping, reporting and training. Manages, plans, coordinates, develops and administers the GSA OSH program to assist Federal agencies in carrying out their duties under Section 19, of the Occupational Safety and Health Administration (OSHA) Act, Executive Order 12196, and 29 CFR 1960. Manages OSH Act compliance, administering implementation of provisions of the OSH Act, Executive Order 12196, and OSHA program regulations within the context of GSA's internal occupational safety and health responsibilities. This includes participation in GSA OSH committees. Serves as consultant to GSA and tenant agency personnel on OSH problems and Serves as a consultant to GSA and tenant agency personnel on safety problems and programs related to buildings and facilities under the control of GSA. Coordinates the Accident Prevention Program for GSA. Investigates major facility safety and health incidents to determine cause, contributing factors and measures to prevent recurrence. Advises management, workers, and unions in GSA and other federal agencies on technical matters involved in accident prevention. Develops and/or prepares policies, handbooks, action memorandums, directives, standards and other guidance, which includes changes to OSH Policies, to assist PBS field staff. Coordinates intensive efforts to achieve new safety techniques and standards for problems of an exceptionally difficult nature, e.g. (1) significant, new or emerging occupations, work processes or functions; (2) disagreement or controversy among subject matter experts about the need for, and means of, controlling hazards; and Manages the overall program to reduce off-duty accidents, with special emphasis on prevention. Maintains close working relations with various safety groups (e.g., National Safety Council, the Federal Safety and Health Council, and the American Society of Safety Professionals). Promotes educational campaigns using posters, pamphlets, and literature through line supervisors and employees to practice mishap prevention procedures for off-duty activities such as boating, biking, camping, food and drug safety and operation of vehicles. Prepares solicitation documents, incorporating special provisions and revising the scope of work when required; reviews and analyzes specifications to ensure adequacy. Recommends revisions to specifications and develops and implements special clauses and provisions for unique procurements as required. Ensures all the recommendations on approved construction and building alteration plans, drawings, and building alteration plans, drawings, and specifications in the area of safety and occupational health are incorporated into projects to obtain compliance with standards to minimize risk to human life and damage to property. Determines portions of the building inventory to be surveyed. Schedules and coordinates survey activities with field office staff. Conducts scheduled and unscheduled comprehensive technical surveys of various facilities and construction types, housing offices, warehouses, laboratories, shops and computer rooms under the control of GSA, to evaluate OSH programs and requirements, including detection of actual physical hazards and potential hazards. As a result of surveys and investigations, prepares comprehensive reports detailing deficiencies or hazards uncovered. Formulates recommendations to correct the hazard or deficiency. Provides cost estimates for implementation of required recommendations or changes. Prepares, or ensures preparation of abatement plans, actions and follow-ups to ensure hazards or deficiencies noted during surveys or inspections, or officially reported to the section branch by the tenant reports or OSHA, are corrected or programmed for correction. Ensures that all Agency reports of unsafe or unhealthy conditions are resolved prior to renegotiation by the responsible operating office. Investigates official tenant agency reports of unsafe or unhealthy conditions. When requested, determines the suitability of building environments utilizing specialized instruments consisting of an Oxygen Indicator, Sound Level Measuring Set, Combustible Gas Indicator, Velometer, Precision Gas Detector, Drager Multi Gas Detector, Monitaire Sampler Kit, Gravimetric Dust Sampling Kit and a Gravimetric Dust Sampling Kit and a Gravimetric Pump Calibrator. Supports the health and safety risk management survey program, to include: reviewing survey reports; monitoring completion of scheduled surveys; recommending technically sound, cost-effective corrective actions to address survey findings; developing instructional guidance to support implementation of corrective actions; and approving completed corrective actions. Tracks and provides progress reports on project tasks assigned by the FRMD Director or their designee. Represents GSA in meetings and negotiations with internal and external stakeholders (e.g., tenant agencies, regulatory agencies, union representatives) to serve as a subject matter expert and ensure Safety and Occupational Health requirements and the interests of GSA are adequately represented and considered. Supports the FRMD with records management by collecting, organizing, and managing Safety and Occupational Health data, reports, and other records in designated file storage platforms and enterprise applications. Stays abreast of the latest developments in the Safety and Occupational Health field and monitors new laws, regulations, standards, and best practices for application within GSA. Conducts other duties as assigned by the FRMD Director or their designee in furtherance of the National Safety and Occupational Health Program and Facility Risk Management Division objectives. Minimum Qualifications: Management (IHMM) is preferred.The incumbent must have a bachelor’s degree in the safety or occupational health fields (safety, occupational health, industrial hygiene) or degree in other related fields that included or were supplemented by at least 24 semester hours of study from among the following (or closely related) disciplines: safety, occupational health, industrial hygiene, occupational medicine, toxicology, public health, mathematics, physics, chemistry, biological sciences, engineering, and industrial psychology. The incumbent must have a minimum of 5 years of relevant work experience, in scientific or technical work that provided an understanding of the basic principles and concepts of the safety and occupational health field. A certification (e.g., CSP) from the Board for Global EHS Credentialing (BGC), Board of Certified Safety Professionals (BCSP), or Institute of Hazardous Materials The incumbent must have expert knowledge of safety and occupational health concepts, principles, laws, regulations and precedent decisions which provide the capability to recommend substantive program changes or alternative new courses of managerial action requiring the extension and modification of existing safety and occupational health management techniques critical to the resolution of safety and occupational health management problems. The incumbent must have knowledge sufficient to serve as a technical authority on occupational safety and health matters and to make significant far reaching recommendations in the development, interpretation or application of the Agency's safety and occupational health policies and critical program criteria. The incumbent must have expert knowledge of policies, practices procedures, techniques and codes dealing with occupational safety, building construction methods, environmental and hazardous materials, industrial processes and safety systems sufficient to enable the specialist to conduct surveys and inspections of construction sites, work places and operations, and to identify and evaluate occupational hazards, compliance of work practices, safety conditions and operations with applicable safety and health and occupational safety codes, regulations and criteria. The incumbent must have technical skill and ability to read and interpret engineering design drawings and specification sufficiently to ensure that proposed safety and health features adequately protect the occupants and visitors of GSA owned/operated buildings The incumbent must have highly developed skills in oral and written communication to: present sensitive recommendations to managers and executives; motivate field staff to implement safety policy requirements and initiatives; articulate technical subject matter to a non-technical audience; and represent the agency to external audiences such as federal customer agencies). The incumbent must have excellent organizational skills and attention to detail.The incumbent must have comprehensive and extensive knowledge of a wide variety of complex and hazardous work operations and conditions associated with and found in vehicle repair facilities, hazardous and flammable materials storage, warehousing and materials handling operations, records storage, automated data processing facilities, boiler plants, and all phases of building construction which enables the specialist to detect hazards, analyze accident and incident data, observe operations to determine if construction, work processes and equipment operations are consistent with applicable safety criteria. The incumbent must have expert knowledge and expertise necessary to make independent judgments and decisions on existing circumstances, to develop new procedures or techniques on resolving hazardous or unsafe equipment or work operations, construction practices and recommending control measures and techniques to reduce or eliminate potential for injuries, accidents, mishaps, control unsafe environmental working conditions, and specifying control measures to protect employees and property. Many issues encountered due to the aging building inventory, unique prior fixes or other extenuating circumstances regularly contribute to decisions in this area being unprecedented in nature. Limitations: Duties performed by this professional shall be reviewed and approved by a GSA Program Manager.

Job DescriptionCompany Description Clerically amended on 1/21/2026 to update Certification Rule Established in 1866, the San Francisco Fire Department is rich in tradition and history. From the Great Earthquake and Fire of 1906 to the Loma Prieta Earthquake of 1989, the Department has grown to meet the many challenges along the way. Today, the San Francisco Fire Department serves an estimated 1.5 million people, providing fire suppression, fire prevention and emergency medical services to the residents, visitors and workers within San Francisco's 49 square miles. Application Opening: July 2, 2025 to Continuous Deadline to apply for this hiring cyle is Friday, January 9, 2026 Compensation Range: $163,644-198,900 Annually Recruitment ID: C00357 Exam Analyst: Deana Kwan Job Description Under general direction, performs challenging and responsible professional engineering review and inspection work in the specialized field of fire prevention and safety, and advises fire inspection personnel engaged in fire prevention work. 5215 Fire Protection Engineer is distinguished from classes 6331 Building Inspector, 6333 Senior Building Inspector, 6334 Chief Building Inspector, 6281 Fire Safety Inspector II, and class H4 Inspector, Fire Department in that the former is a licensed professional engineer specializing in fire protection and safety standards and procedures and possesses the expertise to inspect and test fire protection and suppression systems. EXAMPLES OF IMPORTANT AND ESSENTIAL DUTIES According to Civil Service Commission Rule 109, the duties specified below are representative of the range of duties assigned to this job code/class and are not intended to be an inclusive list. 1. Reviews fire protection plans and systems, equivalency proposals, permit applications, subdivision and parcel maps, etc., to ensure compliance with applicable codes, ordinances, and standards; reviews site permits, architectural, mechanical, electrical, and plumbing plans and specifications for code compliance; ensures that fire code provisions are included where hazardous processes and/or dangerous chemicals or radioactive materials are involved; and submits recommendations to the Fire Marshal for approval or disapproval of plans or specifications., 2. Advises and provides training to Fire Department personnel regarding applicable codes, technical engineering aspects of fire prevention work, plan review, and technical research; prepares technical documents as appropriate; and assists the Chief, Division of Fire Prevention and Investigation (Fire Marshal) in the training of Fire Department Personnel., 3. Inspects and witnesses acceptance tests for fire protection systems; and participates in inspections of buildings and other structures periodically during the course of construction to ensure compliance with approved fire protection plans and testing procedures., 4. Interacts with members of the public (contractors, architects, engineers, building mangers, and owners, etc.) and other government agencies regarding fire code, standard, and ordinance issues; gives lectures and arranges life-safety demonstrations; and represents the Fire Department on fire code and technical issues as necessary., 5. Reviews codes, ordinances, and fire protection standards from other jurisdictions for possible local applications; assists in the development of new codes and ordinances; assists in the revision of codes, ordinances, standards, and Fire Department Administrative Bulletins; and reviews new products, listings, materials, fire protection systems and equipment for use in local fire prevention applications., 6. Provides professional, technical guidance and assistance to the department in the design, testing, and potential of proposed new fire-fighting apparatus and equipment as well as fire-retardant materials., 7. Investigates sites of fires and makes determinations regarding possible structural, mechanical, alarm, fire extinguishing, or other safety system failures; prepares reports as required., 8. Evaluates performance-based analysis to determine whether proposed fire protection systems are acceptable with regard to the intent of codes, standards, and ordinances; evaluates conditions as necessary to ensure that a proposed performance-based design is acceptable; communicates acceptability of performance-based designs to Fire Department officials; and performs and analyzes results of hydraulic water flow tests. These minimum qualifications establish the education, training, experience, special skills and/or license(s) which are required for employment in the classification. Please note, additional qualifications (i.e., special conditions) may apply to a particular position and will be stated on the exam/job announcement. Education: Possession of a baccalaureate degree in fire protection, mechanical, electrical, chemical, or civil engineering, or a related engineering field, from an accredited college or university. Experience: Two (2) years of professional experience in fire protection analysis including building design, specification writing, construction inspection, and plan review (including reading and interpreting architectural plans, computer fire modeling, and review of fire protection and life safety systems such as sprinkler and fire pump systems, smoke removal systems, fire resistive construction, means of egress, etc.) License and Certification: 1. A valid California Driver License., 2. Possession of a valid Fire Protection Engineer license issued by the California Board of Registration for Professional Engineers. Substitution: A degree in fire protection engineering from an accredited college or university may be substituted for one (1) year of the required experience. A valid registration as a Fire Protection Engineer from another state (which is transferable to the State of California) may substitute for the required Fire Protection Engineer license. The FPE license may be obtained post-hire but must be obtained during the 12-month probationary period. In accordance with Civil Service Rule 117.4, an appointing officer, with the approval of the Human Resources Director, may extend the probationary period of a probationary appointee for up to a maximum of twelve (12) calendar months in order to allow the employee time in which to obtain the license. Additional Information IMPORTANT: Applicants may be contacted by email about this announcement and, therefore, it is their responsibility to ensure that their registered email address is accurate and kept up-to-date. Also, applicants must ensure that email from CCSF is not blocked on their computer by a spam filter. To prevent blocking, applicants should set up their email to accept CCSF mail from the following address: @sfgov.org. Applicants will receive a confirmation email that their online application has been received in response to every announcement for which they file. Applicants should retain this confirmation email for their records. Failure to receive this email means that the online application was not submitted or received. All work experience, education, training and other information substantiating how you meet the minimum qualifications must be included on your application by the filing deadline. Information submitted after the filing deadline will not be considered in determining whether you meet the minimum qualifications. Applications completed improperly may be cause for ineligibility or disqualification. Upon successful submittal of the application online, you will receive an email acknowledging the receipt of the application. If you are having difficulty submitting your application online or if you have any questions regarding this recruitment, please contact the exam analyst, Deana Kwan by email at . VERIFICATION: Applicants may be required to submit verification of qualifying education and experience at any point during the recruitment and selection process. If education verification is required, information on how to verify education requirements, including verifying foreign education credits or degree equivalency, can be found at Note: Falsifying one’s education, training, or work experience or attempted deception on the application may result in disqualification for this and future job opportunities with the City and County of San Francisco. Application materials [CCSF application and resume] will be screened to determine that applicants meet the minimum qualifications to advance in the selection process. The application or resume’ must include your role and the tasks that you performed in the qualifying work, as well as project details such as type and size of building; type of construction; occupancy type; whether you performed design and/or plan review tasks; the dates during which the work was performed; and the code and/or additions under which the work was approved. Qualified candidates will be invited to a performance exam. Performance Exam (Weight 100%): The performance exam will be designed to measure essential knowledge areas and abilities. Details on these knowledge areas and abilities can be found from among, but not limited to the following Knowledge, Skills, and Abilities listed here: ELIGIBLE LIST: The eligible list resulting from this examination is subject to change after adoption (e.g., as a result of appeals), as directed by the Human Resources Director or the Civil Service Commission. The duration of candidates’ eligibility on the list will be 24 months and may be extended with the approval of the Human Resources Director. CERTIFICATION RULE: The certification rule for the eligible list resulting from this selection process will be the “Rule of the List”. Department Selection Process: Candidates whose names appear on the adopted eligible list will be invited by the Fire Department to participate in additional selection process steps including interviews. The decision of the Appointing Officer as to an applicant’s qualifications for further screening and appointment will be final. Terms of Announcement and Appeal Rights: Applicants must be guided solely by the provisions of this announcement, including requirements, time periods and other particulars, except when superseded by federal, state or local laws, rules or regulations. [Note: The correction of clerical errors in an announcement may be posted on the Department of Human Resources website at . The terms of this announcement may be appealed under Civil Service 211.6. Such appeals must be submitted in writing to the Department of Human Resources, 1 S Van Ness Avenue, 4th Floor, San Francisco, CA 94103-5413 by the Department of Human Resources/Examination Division of the Police Department within five (5) calendar days from the issuance date. Information concerning other Civil Service Commission Rules involving announcements, applications and exam policies, including applicant appeal rights, can be found on the Civil Service Commission website at . • Information About the Hiring Process, • Conviction History, • Employee Benefits Overview, • Equal Employment Opportunity, • Disaster Service Worker, • ADA Accommodation, • Right to Work, • Copies of Application Documents Applicants should retain this confirmation email for their records. Failure to receive this email means that the online application was not submitted or received. Exam Analyst Information: If you have any questions regarding this recruitment or application process, please contact the exam analyst, Deana Kwan, at . The City and County of San Francisco encourages women, minorities and persons with disabilities to apply. Applicants will be considered regardless of their sex, race, age, religion, color, national origin, ancestry, physical disability, mental disability, medical condition (associated with cancer, a history of cancer, or genetic characteristics), HIV/AIDS status, genetic information, marital status, sexual orientation, gender, gender identity, gender expression, military and veteran status, or other protected category under the law.

Job DescriptionCompany Description • Application Opening: March 27, 2026, • Application Filing Deadline: April 24, 2026, • Eligible List Duration: Twelve (12) months., • Compensation Range: $156,806 San Francisco is a vibrant and dynamic city, on the forefront of economic growth & innovation, urban development, arts & entertainment, as well as social issues & change. This rich tapestry of culture and ideas is sustained by our City's commitment to heighten the quality of life for the diverse population of San Franciscans and residents of the greater Bay Area. Our employees play an important role not only in making our City what it is today, but also in shaping the future of San Francisco. ABOUT THE WATER ENTERPRISE The Water Enterprise Manages our complex regional water supply system featuring reservoirs, tunnels, pipelines, and treatment plants. We serve 2.7 million Bay Area residential, commercial, and industrial customers with high-quality, great tasting water every day. Our protected watersheds in Tuolumne, Alameda, and San Mateo counties ensure that we deliver safe, reliable water throughout our service area. We are proud to operate one of the most environmentally sustainable systems in the country. Job Description The Senior Water Treatment Plant Stationary Engineer supervises or participates in the operation, maintenance, and repair activities of a wide variety of complex machinery and equipment in a water filtration plant, pump station or related facility; participates in the operation, maintenance, and repair activities on machinery and equipment; acts as Chief Plant Operator when necessary; and helps develop training plans and procedures. The essential job functions include, but are not limited to, the following: • Supervises or participates in the day-to-day operation of a water treatment plant in order to meet all state and federal water quality standards., • Sets daily operational parameters for treated water reservoir levels, chemical dosages, treatment methods and laboratory analysis., • Assists in planning and coordinating in-house maintenance and repair of all filter plant, field facility, and ozone facility equipment., • Assists in planning and coordinating work to be performed by employees of other trades, crafts, divisions, and contractors., • Initiates work orders, inspects and review completed work., • Conducts safety and hazardous material management training sessions and prepares accident reports., • Orders and maintains safety and hazardous materials supplies, purchases routine material, supplies, water treatment chemicals, maintains inventories, and maintains safe storage of chemicals., • May train, evaluate and discipline subordinate staff, set daily work schedules and job priorities, and supervise the operation of a computerized water distribution system., • Makes remote chemical adjustments to meet state and federal water quality standards., • Performs related duties as required for Class 7343 – Senior Stationary Engineer, Water Treatment Plant.Qualifications Applicants must meet the minimum qualification requirements by the Job Ad final closing date unless otherwise noted. If you are interested in this job, we are looking for people that have the following minimum qualifications: Experience: • Five (5) years verifiable journey-level Stationary Engineer and/or Operator experience in the operation, maintenance, repair of a variety of mechanical electrical, pumping, and related machinery of a water or wastewater treatment plant, three (3) years of which must be in a surface water treatment plant; OR, • Possession of a current valid Grade IV California Water Treatment Plant Operator Certificate. Applicants who currently possess a Grade III California Water Treatment Plant Operator Certificate may participate in the examination but will remain under waiver of appointment on the eligible list until proof of Grade IV is submitted. Positions with the City Distribution Division require possession of a current valid Grade III California Water Distribution Operator Certificate. Work reporting locations for positions with the Water Supply and Treatment Division will be in San Bruno or Sunol. Work reporting location for positions with the City Distribution Division will be in San Francisco. Some physical effort and use of all senses is required in the operation, repair and maintenance of machinery and equipment including kneeling, crouching, stooping, squatting crawling, climbing, working in various lift equipment and use of fixed and portable ladders up to 75 feet, walking long distances and lifting up to 50 pounds in the performance of important and essential duties. This also includes exposure to working conditions where the performance of duties requires working in confined spaces, damp environments, outdoors in inclement weather, and with chemicals. DRUG TESTING REQUIREMENT: Applicants for positions in this classification who are not currently employed by the City and County of San Francisco in a safety-sensitive position represented by Local 39 are required to pass pre-employment drug and alcohol testing. All employees in this classification may also be subject to drug and alcohol testing upon reasonable suspicion or after a work-related accident. Applicants with a positive result from a pre-employment drug test will be restricted from hire in safety-sensitive positions for six-months after the date of the positive test. Upon appointment to Class 7343, employees may be required to take a state mandated respirator and self-contained breathing apparatus (SCBA) medical examination, (renewed annually) and be clean shaven prior to starting each shift for respirator and SCBA use. Employees may be required to pass CPR training annually and first aid training tri-annually. SELECTION PROCEDURE After application submission, candidates deemed qualified must complete all subsequent steps to advance in this selection process, which includes the following: Supplemental Questionnaire Examination (Weight 100%) The Supplemental Questionnaire is an exam and contents will be evaluated and scored. The Supplemental Questionnaire Exam is to evaluate the experience, knowledge, skills and abilities that candidates possess in job-related areas which have been identified as critical for this position and include, but are not limited to: water treatment and water distribution systems operations, heating ventilating and air-conditioning systems, pumps and compressors, equipment control devices, shop practices and safety requirements, and communications skills. Candidates will be placed on the eligible list in rank order according to their final score. Candidate scores on this examination may also be applied to other announcements involving other job titles, when directed by the Human Resources Director. The department may administer additional position-specific selection procedures to make final hiring decisions. Candidates scores on this examination may also be applied to other announcements involving other job titles, when directed by the Human Resources Director. HOW TO APPLY Applications for City and County of San Francisco jobs are only accepted through an online process. Visit and begin the application process. • Select the “I’m Interested” button and follow instructions on the screen Applicants may be contacted by email about this recruitment and, therefore, it is their responsibility to ensure that their registered email address is accurate and kept up-to-date. Also, applicants must ensure that email from CCSF is not blocked on their computer by a spam filter. To prevent blocking, applicants should set up their email to accept CCSF mail from the following addresses (@sfgov.org, @sfdpw.org, @sfport.com, @flysfo.com, @sfwater.org, @sfdph.org, @asianart.org, @sfmta.com, @sfpl.org, @dcyf.org, @first5sf.org, @famsf.org, @ccsf.edu, @smartalerts.info, and @smartrecruiters.com). Applicants will receive a confirmation email from mailto: that their online application has been received in response to every announcement for which they file. Applicants should retain this confirmation email for their records. Failure to receive this email means that the online application was not submitted or received. If you are having trouble with the application, please visit Smart Recruiter's FAQs or email . It is suggested you use Google Chrome or Microsoft Edge web browser to submit the application. Additional Information All work experience, education, training and other information substantiating how you meet the minimum qualifications must be included on your application by the filing deadline. Information submitted after the filing deadline will not be considered in determining whether you meet the minimum qualifications. Applicants may be required to submit verification of qualifying education and experience at any point during the recruitment and selection process. If education verification is required, information on how to verify education requirements, including verifying foreign education credits or degree equivalency, can be found at . Note: Falsifying one’s education, training, or work experience or attempted deception on the application may result in disqualification for this and future job opportunities with the City and County of San Francisco. Applications completed improperly may be cause for ineligibility, disqualification or may lead to lower scores. Eligible List/Score Report: A confidential eligible list of applicant names that have passed the civil service examination process will be created and used for certification purposes only. An examination score report will be established so applicants can view the ranks, final scores, and number of eligible candidates. Applicant information, including names of applicants on the eligible list, shall not be made public unless required by law. However, an eligible list shall be made available for public inspection, upon request, once the eligible list is exhausted or expired and referrals resolved. The eligible list/score report resulting from this civil service examination process is subject to change after adoption (e.g., as a result of appeals), as directed by the Human Resources Director or the Civil Service Commission. This pool of candidates on the eligible list may be used to fill additional vacancies in this class. The duration of the eligible list resulting from this examination process will be twelve months and may be extended with the approval of the Human Resources Director. Terms of Announcement and Appeal Rights: Applicants must be guided solely by the provisions of this announcement, including requirements, time periods and other particulars, except when superseded by federal, state or local laws, rules or regulations. [Note: The correction of clerical errors in an announcement may be posted on the Department of Human Resources website at . The terms of this announcement may be appealed under Civil Service Rule 110.4. Such appeals must be submitted in writing to the Department of Human Resources, 1 S Van Ness Avenue, 4th Floor, San Francisco, CA 94103-5413 by close of business on the 5th business day following the issuance date of this examination announcement. Information concerning other Civil Service Commission Rules involving announcements, applications and examination policies, including applicant appeal rights, can be found on the Civil Service Commission website at . Additional Information Regarding Employment with the City and County of San Francisco: • Information About The Hiring Process, • Conviction History, • Employee Benefits Overview, • Equal Employment Opportunity, • Disaster Service Worker, • ADA Accommodation, • Veterans Preference, • Seniority Credit, • Right to Work, • Copies of Application Documents Please note: all your information will be kept confidential according to EEO guidelines. The City and County of San Francisco encourages women, minorities and persons with disabilities to apply. Applicants will be considered regardless of their sex, race, age, religion, color, national origin, ancestry, physical disability, mental disability, medical condition (associated with cancer, a history of cancer, or genetic characteristics), HIV/AIDS status, genetic information, marital status, sexual orientation, gender, gender identity, gender expression, military and veteran status, or other protected category under the law.

This range is provided by Pump. Design, build, and maintain backend services that power the Pump platform.

An innovative tech startup in San Francisco is seeking an experienced frontend/fullstack engineer to play a critical role in building their AI-powered platform.You will collaborate with other engineers and designers to create a user-friendly application and help define the technical roadmap.The idea

Referrals increase your chances of interviewing at Pump. A great opportunity for someone to create a lasting impact not only on the primary product but also on the company's values and vision, given our early stage - we hope Pump would be that career defining opportunity for all of us!.

Job DescriptionSalary: $25-$30/hr DOE Conrac Solutions is seeking a full-time Maintenance Technician for the Salt Lake City Airport consolidated Rental Car Facility.We manage consolidated rental car facilities at airports across the country and are seeking your help to ensure our equipment is maintained in peak working order. Visit to view more about our work. EXCELLENT PAY AND BENEFITS! As our Facility Maintenance Technician, you will be responsible for completing a variety of maintenance functions including preventive maintenance, troubleshooting, and repairs to our equipment and systems including car wash stations, HVAC, plumbing, and electrical. We need a new maintenance technician with skills for car wash repair or motor (machine) and pump work experience. JBCSCSLSLCMT01 Duties: • Perform and record scheduled preventative maintenances on a variety of systems., • Troubleshoot failed equipment and provide recommended repair methods., • Assist in minor repairs on general facility equipment and systems (i.e. electrical, plumbing, doors, gate systems, HVAC, etc.)., • Track work performed through a computer maintenance management system (CMMS)., • Ensure operational reliability and work to improve efficiency., • Participate in the latest industry standard training procedures., • Maintain cleanliness of all work areas including inventory area and tools., • Manage and maintain an onsite parts stock inventory via an online maintenance management software., • Respond appropriately to urgent, emergency, or after-hour issues as they arise. Qualifications: • High School Diploma or GED required., • OSHA 10-hour general industry course complete before engaging in work on site., • Proficiency working safely with hand and small power tools., • Basic knowledge of facility equipment and facility maintenance programs and procedures., • Proficient understanding of mechanical, electrical, and plumbing systems., • Strong knowledge of safety principles and practices., • Ability to identify and recognize unsafe conditions or work practices., • Effective communication skills., • Keen attention to detail., • Basic computer skills, Microsoft Office, and typing are required., • Professional in appearance and character., • Able to work well in a collaborative environment., • Valid Drivers License and Insurance. Physical Requirements: • Frequent standing, ladder use, walking, and sitting., • Frequent lifting and carrying up to 25 pounds., • Occasional lifting and carrying up to 50 pounds., • Frequent requirement to bend, stoop, crouch, lift materials overhead., • Must be able to work at computer or desk area for extended periods of time., • Must be able to use a computer. Competitive total compensation package including: • Medical, • Dental, • Vision, • Generous PTO plan, • 401(k) Equal Opportunity Employer

Referrals increase your chances of interviewing at Pump. Pump is a building the fastest way to save ~60% on cloud spend. Pump is a building the fastest way to save ~60% on cloud spend.

Job Description BKF is a multi-service infrastructure consulting firm providing civil engineering and surveying services across California, the Pacific Northwest, and beyond. With offices throughout California and the Portland area, BKF has served transportation, water resources, land development, government, and federal clients for over 110 years. At BKF, you’ll find a unique opportunity to grow your career with intention. Our culture values professional autonomy, innovation, and meaningful collaboration across offices. We are proud to be recognized with the Great Place to Work certification for the second year in a row. We are seeking a Stormwater Project Manager with expertise in Water Resources and Civil Infrastructure to strengthen our California presence. Ideal candidates have 10-15 years of experience, a California P.E. license, and a passion for leading projects and fostering client relationships. This role collaborates across BKF teams to deliver water infrastructure projects while anchoring our regional water resources practice. Responsibilities • Ability to lead design and project management efforts across a range of water infrastructure projects, including wastewater and stormwater management (pipelines, pump stations, tanks, planning studies, hydrology/hydraulic evaluations, and rehabilitation initiatives), • Readiness to leverage internal talent for project delivery while scaling a local network, • Familiarity with permitting processes, technical studies, and client coordination, • Strong commitment to quality, innovation, and continuous improvement in water infrastructure engineering, • Demonstrated managerial aspirations and leadership qualities to potentially foster a local team and mentor junior staff, • Ability to quickly become familiar with BKF’s service offerings and cross-sell all services to regional clients, • Based in California to enhance existing BKF local staff and client relationships and establish a regional footprint, • Bachelor’s degree in Civil or Environmental Engineering or related field, • California Professional Engineer (P.E.) license is required, • 10 to 15 years of experience in water resources infrastructure, including design and project management of stormwater and wastewater projects (pipelines, pump stations, and rehabilitation), • Strong background in water infrastructure design, including stormwater and wastewater management (pipeline design, pipe rehabilitation, pump station design and rehabilitation), • Proven ability to lead planning studies, master plans, and infrastructure projects from concept through delivery and completion, • Excellent interpersonal and communication skills to engage with new, existing clients, internal teams, and stakeholders, • Demonstrated success in building client relationships and strategic positioning for project opportunities, • Entrepreneurial drive to pursue new water resource projects and establish a local presence, with the potential to grow and lead a team Work Conditions: Exposure to constant or intermittent sounds at a low or moderate level consistent with an office setting. Exposure to high-stress, fast-paced, deadline-oriented environment. Travel to other BKF locations and client sites may be required. Benefits • The typical base salary range for this position is $130,000.00 - $180,000.00, annualized depending upon skills, experience, education, and geographical location. This is a salary position paid biweekly., • Competitive salaries, end of year bonuses, profit sharing, and 401k., • Generous paid time off packages, • 9 Paid Holidays., • Flexible schedules., • Education reimbursement, Paid annual dues for professional and societal organizations. BKF Engineers does not accept unsolicited resumes from recruiters or employment agencies. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement and a specific solicitation for the position or other approved engagement request for the position with BKF Engineers, BKF Engineers reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited submittals are done at the risk of the recruiter. #LI-Hybrid

Job Description About Us Hazen and Sawyer is an employee-owned professional corporation providing consulting services in Environmental Engineering and Science to the public and private sectors since 1951. We are currently seeking candidates for a full-time Mid-Level Structural Engineer. Job Description The position will include performing structural design and analysis of environmental structures such as low-rise industrial buildings, pump stations, process basins, treatment facilities, dams and spillways. The selected individual will lead the structural design and construction administration responsibilities for major projects involving upgrades to wastewater, water and reclaimed water treatment plants. Responsibilities • Computer-aided design (AutoCAD, Revit drafting/modeling, STAAD)., • Full structural design per governing building codes and design standards including ACI, AISC and ASCE., • Performing construction management tasks such as shop drawings reviews and field inspections., • Candidates must be effective communicators and successfully work in multi-discipline team environment., • Some travel required for site reconnaissance tasks, condition assessments, and structural observations. Requirements • 6-12 years of experience, • Have a BS or MS degree in Civil Engineering with a Structural concentration from an ABET accredited institution., • Candidates must have a Professional Engineering (PE) license, and a Structural Engineering (SE) license is preferred, or the ability to obtain such in the State of California, Oregon or Washington., • Experience in design and construction of reinforced concrete, steel, reinforced masonry and structural aluminum., • Experience with water and wastewater systems preferred. We provide a comprehensive benefits package which includes employer paid life insurance, 401k employer contribution (after 1 year of service), performance bonus, comprehensive family medical, dental and vision insurance, paid time off, holidays, short-term and long-term disability, paid parental leave (after 1 year of service), employee assistance and wellness programs. Typical starting pay range for this position depends on skills, experience, education and geographical location.

Design, build, and maintain backend services that power the Pump platform.

This range is provided by Pump.

Job DescriptionDescription: As part of our Bridge & Structures Practice, you will be responsible for preparing structural plans, specifications, cost estimates, calculations, reports, and general technical support for civil infrastructure projects. You will have the opportunity to work on a range of structure types, including bridges, retaining walls, culverts, gantries and signs, culverts, pipe supports, tanks and anchorages, pump stations, maintenance facilities, and more. You will support projects throughout California. You will have the opportunity to grow your technical competency focusing on the direction of your choice under the guidance and with the support of senior engineers and managers such that you can take on increasingly challenging tasks with commensurately increasing responsibility and autonomy. Anticipated responsibilities include the following: • Capital projects are often large and multi-disciplinary, involving all civil technical disciplines, often from multiple public and private organizations, as well as contract management and oversight professionals from multiple agencies. For the consultant to provide the most effective service and phased deliverables, exceedingly talented communicators and collaborators are required. It is our experience and firm belief that the most valuable skill for the long-term success of the bridge engineer is the ability to effectively communicate complex ideas, both written and spoken. You will be required to communicate in all forms, regularly, with the understanding that your communication is a reflection of our local competency, our larger business, and our dedication to professionalism., • Preparation of construction/contract documents (PS&E), technical studies and reports, and supporting calculations and documentation., • Competency in the use of bridge specific finite element analysis, section analysis, design, post-processing, and related software., • Application of bridge design safety code requirements, including AASHTO LRFD., • Application of Seismic Design concepts., • Ability to perform construction site visits and offer construction support engineering services, to include responding to contractor RFI’s and reviewing shop submittals., • Ability to perform preventative maintenance-based bridge inspections., • Ability to coordinate with CADD technicians to ensure timely and accurate plan preparation. (CAD capabilities are a plus), • Ability to manage and track your time, with some assistance, amidst a multitude of deadlinesRequirements:, • B.S. Civil Engineering, • M.S in Structural Engineering, • Professional Engineer (P.E.) License or E.I.T, • 2-12 years of progressive work experience in structural/bridge design

Job DescriptionDescription: About the Company Loop Neighborhood Market is based in Union City, Calif., with stores and stations across California. The company was founded in 1978 and develops real estate and owns and operates gas stations with convenience stores and car washes. Loop Neighborhood Market also has a wholesale division that delivers fuel to dealer locations in the market. Join Our Growing Team at Loop Neighborhood Market! Are you ready to be part of a dynamic, fast-growing organization that's reshaping the convenience store industry? Loop Neighborhood Market is an industry leader looking for passionate, customer-focused individuals to help us redefine the c-store experience. Our mission is simple: to offer high-quality, better-for-you products, paired with exceptional customer service, and create a fantastic experience from the moment you walk into our stores. If you're motivated by innovation and have a passion for delivering outstanding service, we'd love to have you on our team. Apply today and help us change the way people experience convenience! Position Summary: This position calls for people who are adept at both assisting customers and leading a diverse team of individuals. In the role of Team Leader, you'll be responsible for managing all aspects of the store's operation—a responsibility you'll prepare for through a training sequence that teaches you the company in-store retail information system, inventory management and ordering technology. You will be tasked with handling daily paperwork, troubleshooting car wash issues and other gas pump related issues. This leadership role will also include forecasting, ordering, stocking, and merchandising products, reconciling store paperwork, setting the tone for courteous customer service, and managing the store staff. We expect all of our Team Leaders to embody our Core Values: People, Teamwork, Communication, Training, Results Matter, Fun, Customer Centered and Safety. We all win as one. Living our brand is a critical component for all our roles. Below is a general outline of some of the roles and responsibilities expected of our Team Leaders (this list is not all inclusive): Primary Responsibilities: • Train and coach new staff, manage performance, and handle staffing needs, • Create schedules, track time, and ensure accurate store paperwork reconciliation, • Stock products, maintain store cleanliness, and manage product merchandising, • Forecast, order, and control inventory, with a focus on shrinkage control, • Track and manage operating expenses to ensure profitability, • Develop a sales-driven culture using data analysis, goal setting, and in-store operating profit management, • Ensure efficient, courteous customer service for customers, vendors, and staff, • Troubleshoot and resolve car wash and gas-related issues, • Maintain compliance with local, state, and federal regulations and budget requirements, • Maintain a clean, customer-friendly environment inside and outside the store, • High School Diploma or equivalent required, • Six to nine months’ experience as an assistant manager, manager, or an equivalent combination of education and experience, • Strong mathematics ability, • Strong written and oral communication skills, • Desire to be part of a performance-driven team, • Valid driver’s license and insurance, • Employees that are with us for 6 months to 3 years = 0.10 cents off a gallon of fuel, • Employees that are with us for 3 years to 5 years = 0.30 cents off a gallon of fuel, • Employees that are with us for 5+ years = 0.40 cents off a gallon of fuel The Team Leader position requires constant standing, bending and reaching with a moderate amount of manual dexterity. Frequent lifting of 1 to 5 pounds and occasional lifting of up to 40-50 pounds are required. Additional Requirements: • Must be 21+ years of age, • Must be able to work various shifts and days of the week depending on business needsRequirements:

Job Description We are looking for highly competent, driven, team-oriented individuals who enjoy tackling unique and challenging projects. Anvil’s commitment to Safety, Teamwork, Grit, Best-in-Class performance, and Fun is evident throughout every aspect of the company. Founded by a purple heart veteran we continue to support our service members and honor the skillset and experience they add to the team. Anvil Builders is a dynamic general contracting and civil engineering firm boasting a diverse scope of capabilities ranging from water/ waste-water, mechanical pump station, structural concrete, electrical, aviation, temp services, disaster response/ clean up, and much more. We work in both the public and private sectors delivering the highest quality outcomes to the client. We are proud to contribute to the communities we work and live in. The Senior Project Manager/ Electrical Estimator will be responsible for heading estimating for all heavy civil electrical work. They shall leverage strong relationships with subcontractors and suppliers; negotiate prices and organize bids for submission. Champion seamless transition to project management team. A strong candidate should exhibit creative problem solving, exceptional time management to meet deadlines, ability to accurately read and understand plans and specs. Anvil offers generous benefits such as: • Medical coverage- medical, dental, vision, and LTD, • Flexible paid time off, • Parental/ Family leave, • 401k enrollment and % matching contributions, • Profit sharing, • Tuition reimbursement, • Company Vehicle, • Gas card, • Cell phone/ Cell phone reimbursement, • Gym membership reimbursement Primary Responsibilities: • Prepares and maintains comprehensive estimates, budgets, and schedules for a variety of projects. Allowances for the waste of materials, inclement weather, shipping delays, and other factors that may increase costs must be incorporated in the estimate., • Assists in determining necessary resources for projects based on cost estimates and budgetary constraints., • Assess existing site conditions such as access to and availability of electricity, water, and other services, as well as on surface topography and drainage., • Review all Scopes of Work, proposal specifications, drawings and photographs, to ensure compliance with building code requirements; clarity of information; consistency between area details and descriptions; and accuracy of quantities and items selected., • Participate in preliminary project review meetings to discuss project details, client background and prevention of future challenges., • Provides continuous project estimating and schedule reviews throughout the project., • Bachelor’s Degree in construction management, engineering, architectural engineering, or related discipline. 10+ years of Estimating experience. Familiarity with Excel, HCSS, and HeavyBid, preferred. Powered by JazzHR mPHuewebSE

Job DescriptionDescription: An excellent opportunity exists to work for a government contractor with competitive compensation and an excellent work-life balance. Posterity Group, LLC is seeking a Cardiothoracic Physician Assistant (CTPA) with the San Francisco VAHCS. The Cardiothoracic Physician Assistant is expected to do the following: • The CTPAs are responsible for insertion, operation and removal of intra-aortic balloon pump, • Critical services include endoscopic radial and saphenous vein harvesting (must have documented experience of >100 endoscopic procedures in each location), • Ultrasound guided arterial and venous access for central line placement, chest tube and pigtail insertion and removal, • Insertion and removal of Swan-Ganz catheter, removal of pacing wires, cardioversion, • Performance of first and second assistant responsibilities in cardiothoracic surgery in the operating room, • Bedside assistant for robotic procedures., • A CTPA who can work in the operating room two days per week, 6 hours per day located at the SFVAHCS., • VA Business Hours: VA business hours/hours of operation are Monday through Friday, 8:00 a.m. – 4:30 p.m., • Off-hours Coverage: There is no off-hours coverage required. Requirements:, • At least 3 years of relevant experience, • Valid license (PA-C), • Master's degree Physician's Assistant Studies, • Previous surgical experience as a First Assistant., • Cardiothoracic experience with EVH background highly recommended., • Must possess strong physician/surgeon relationship skills and team mentality., • Ability to communicate and work effectively with team members, hospital staff and physicians.

Job DescriptionDescription: Posterity Group LLC is a veteran owned, service-disabled small business, headquartered in Rockville, MD, that specializes in federal government contracting and staffing. We are tasked with staffing the San Francisco VA Healthcare System with 2 FTE Board Certified Perfusionists. The Perfusionist is expected to perform the following: • All Perfusionists shall assist the Cardio-Thoracic service with by-pass surgical cases and valve replacement of various types., • Shall perform onsite Perfusion Services in the treatment of care for eligible veteran beneficiaries as referred and authorized by the VA., • The Perfusionists are responsible for preparation, and operation of the heart and lung machines/pumps in conjunction with maintaining a sterile environment for procedures maintaining blood volume in the patients preventing shock or air embolus., • Assemble supplies and equipment in preparation to accept patient on extra corporeal circulation in cases of premature cardiac arrest or failure., • Other services include preparation, maintenance and operation of VA owned equipment to include the heart lung machine, auto transfusion pump, intra-aortic balloon pump and centrifugal ventricular assist device. Requirements: • At least a minimum of ten (10) years of experience, • All Perfusionists shall be a graduate of an accredited Allied Health Education Program School of Perfusion Technology, • Shall be certified by the American Board of Cardiovascular Perfusion, • Demonstrate evidence of meeting continuing education requirements and shall have performed a minimum of 1000 clinical cases., • Experience shall be demonstrated in the following areas: Open heart surgery, autotransfusion, heart lung machine, membrane oxygenation, left/right heart bypass, intra-aortic balloon pumping and centrifugal ventricular assist device., • Valid BLS

Job DescriptionWho We AreWith a legacy spanning four decades, Action Property Management has become the premier choice for homeowner’s association management. Founded in 1984, Action began with a single client and a vision to elevate ethical and professional standards in the HOA industry. Our unwavering commitment to integrity, and professionalism coupled with our core values of excellence, innovation and care for people, continues to define us. Today, as the largest privately owned HOA management company in the West, we proudly serve over 300 communities across 9 offices. Our success is fueled by a team of nearly 900 dedicated team members who genuinely love what they do and are dedicated to helping homeowners thrive and love where they live. Action Property Management, the leader in community management, is seeking a full-time Building Engineer II to join our team at our luxury association, Telegraph Landing North, located in San Francisco. The Building Engineer II is responsible for overseeing all aspects of building maintenance and repairs at the assigned property. This role involves developing maintenance strategies and ensuring the building's systems and equipment operate efficiently and safely. The ideal candidate will have a strong technical background and excellent leadership skills. Compensation: $40.00 - $45.00 Per Hour Schedule: Monday- Friday; 8:00 AM- 4:30 PM + On-CallEssential Job Duties and Responsibilities: • Maintenance Planning and Execution, • Develop and implement a comprehensive preventive maintenance program., • Schedule and oversee maintenance tasks, including repairs, inspections, and upgrades., • Monitor building systems and equipment to identify potential issues and take corrective action., • Conduct regular building inspections to identify maintenance needs., • Coordinate with vendors and contractors to ensure timely and cost-effective repairs. Vendor Management, • Manage relationships with vendors and contractors., • Negotiate contracts and ensure compliance with service level agreements., • Oversee vendor performance and address any issues. Budget Management, • Develop and manage the maintenance budget., • Monitor expenses and identify cost-saving opportunities. Emergency Response, • Respond to emergency maintenance requests and coordinate repairs., • Develop and implement emergency response plans., • Conduct regular emergency drills and training sessions. Regulatory Compliance, • Ensure compliance with all applicable building codes, safety regulations, and local ordinances., • Maintain accurate records of maintenance activities and inspections., • Coordinate with local authorities to obtain necessary permits and licenses. Technology Utilization, • Utilize building management systems and maintenance software to optimize operations., • Implement new technologies to improve efficiency and reduce costs.Qualifications / Requirements:, • Minimum of 5 years of building maintenance or facilities management., • Strong technical knowledge of building systems, including HVAC, plumbing, electrical, and fire safety systems., • Excellent leadership, organizational, and communication skills., • Ability to manage multiple tasks and prioritize effectively., • Proficiency in maintenance management software and Microsoft Office Suite., • Frequent standing, walking, bending, and lifting., • Ability to lift up to 75 pounds., • May be required to work flexible hours, including weekends and evenings., • Ability to rotate weekend to ensure weekend coverage. Education / Certifications:, • High School Diploma or equivalent. College degree in engineering and or mechanical engineering is preferred., • EPA/608 license, • Weekly Fire Pump Certificate, • OSHA 10 card

Job Description BKF is a multi-service infrastructure consulting firm providing civil engineering and surveying services across California, the Pacific Northwest, and beyond. With offices throughout California and the Portland area, BKF has served transportation, water resources, land development, government, and federal clients for over 110 years. At BKF, you’ll find a unique opportunity to grow your career with intention. Our culture values professional autonomy, innovation, and meaningful collaboration across offices. We are proud to be recognized with the Great Place to Work certification for the second year in a row. We are seeking a Senior Project Engineer with expertise in Stormwater, Water Resources, and Civil Infrastructure to support and deliver water infrastructure projects across California. The ideal candidate has 6 or more years of experience in Stormwater water infrastructure, and the ability to lead design efforts and support project management activities. A California Professional Engineer (P.E.) license is highly preferred. This role collaborates closely with Project Managers and multidisciplinary BKF teams to deliver high-quality water infrastructure solutions while mentoring junior staff. Responsibilities • Lead and contribute to the design and delivery of water infrastructure projects, including stormwater and wastewater systems such as pipelines, pump stations, tanks, rehabilitation projects, planning studies, and hydrology/hydraulic analyses, • Support project management activities, including scope development, schedules, budgets, coordination with internal teams, and technical deliverables, • Prepare and review engineering calculations, technical reports, plans, and specifications, • Coordinate with clients, agencies, and stakeholders, including support of permitting processes and regulatory approvals, • Apply BKF standards and best practices to ensure quality, consistency, and innovation in project delivery, • Mentor and provide technical guidance to junior engineers and designers Collaborate across BKF service lines and disciplines to support integrated project delivery, • Bachelor’s degree in Civil or Environmental Engineering or a related field, • California Professional Engineer (P.E.) license is highly preferred (EIT required), • 6+ years of experience in water resources and civil infrastructure engineering, with an emphasis on stormwater and/or wastewater projects, • Strong technical background in stormwater and wastewater infrastructure design, including pipelines, pump stations, pipe rehabilitation, and hydrology/hydraulic modeling, • Experience supporting or leading planning studies, master plans, and infrastructure projects from concept through design and construction support, • Familiarity with California permitting processes, agency coordination, and technical documentation, • Demonstrated ability to work both independently and collaboratively in a multidisciplinary environment, • Strong communication skills and the ability to effectively coordinate with clients and project teams Work Conditions: Exposure to constant or intermittent sounds at a low or moderate level consistent with an office setting. Exposure to high-stress, fast-paced, deadline-oriented environment. Travel to other BKF locations and client sites may be required. Benefits • The typical base salary range for this position is $115,000.00 - $149,000.00, annualized depending upon skills, experience, education, and geographical location. This is a salary position paid biweekly., • Competitive salaries, end of year bonuses, profit sharing, and 401k., • Generous paid time off packages, • 9 Paid Holidays., • Flexible schedules., • Education reimbursement, Paid annual dues for professional and societal organizations. BKF Engineers does not accept unsolicited resumes from recruiters or employment agencies. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement and a specific solicitation for the position or other approved engagement request for the position with BKF Engineers, BKF Engineers reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited submittals are done at the risk of the recruiter. #LI-Hybrid