Pump jobs in Los Angeles, CaliforniaCreate job alerts

Trusted is seeking an experienced nurse for this exciting travel nursing assignment. Trusted has streamlined the travel nursing experience by enabling nurses to apply directly to jobs without the need for recruiters. This unique approach provides more transparency, eliminates pesky calls from recruiters, and puts more money in your pocket. Join the thousands of nurses across the country who have already made the switch to a more modern way to work. Experience: • 24 months of role experience is required with some in the last 12 months., • Must have at least 24 months of Cardiac Cath Lab experience within the past 4 years., • Travel experience is preferred from any number of months. Requirements: • Candidates must have a California license (required for submission)., • This role may require floating to additional units and locations, • Local & travel allowed. Candidates living <50 miles from facility will be processed as local., • COVID vaccination required after submission. Religious and medical declinations accepted., • COVID booster required after submission. Religious and medical declinations accepted. Pre-employment modules may be required for this role. Please upload any certifications or health documents you have to your profile to expedite your on-boarding process. Additional Details: Previous Employment Requirements: Required Skills/Experience: Cath Lab experience- experience setting up the above equipment (EP, Neuro, trauma, and complex IR experience preferred) but a willingness to learn these areas if necessary. Preferred Skills/Experience: Required Credentials: Preferred Credentials: Procedures/Diagnostics/Treatments Performed on Unit: Types of Patients on Unit: - Cath lab- L&R interventional and diagnostic, implants, pacers, STEMIs ect, Balloon Pump, Impella, ECMO, shockwaves- rotablader - EP- EP studies, diagnostics, ablations, watchmans, TAVR etc Trauma- ebmolization, peripheral cases IR- complex more in depth intervention, embolize bleed - Neuro- Cerebral aneurysms, diagnostics, thrombectomies, rotoblade, coils, etc. Equipment Used on Unit: Technology Used on Unit: Cerner and Merge Unit/Facility Details: Cath Lab, EP and IR. Special Requests: Self scheduling is allowed, however, we only honor the requested time off in their contracts as we try to meet the departments’ needs first and this being a union hospital, seniority is honored. Shift & Scheduling: • Variable days, starting at 6-630a depending on cases., • Weeknight/Call Requirements: 12-14 (including weekends) call days of weekday call required per 4 week schedule. Starts when staff leave for the day roughly 5p-7a unit the start of next shift. Required call every other weekend. Starts when they get off shift on Friday about 5p and it goes through to Monday at 7a., • Holiday/Call Requirements: Call required- depending on the needs, • 30 minutes response time. Job Duties: Circulate, no scrub required. Moderate sedation. patient teaching. transporting patient to and from original departmet. All other medication administration. Equipment set up of Balloon Pump, Impella and Rotablade. Good communication and rapport with interventionalist and other relevant staff in the hospital. Practices hand-off and SBAR. Holiday/Call Requirements: Call required- depending on the needs What is call response time?: 30 minutes, no call room Floating Requirements: none Scrub Color/Dress Code: Provided Unit/Department specific orientation: 2-3 shifts Additional Notes: Candidates should be flexible and willing to stay past their 10 hour shifts if they are needed, for longer cases Additional Questions: Tell me about a time when you made a difference in a patient’s life? An interview may not be available prior to offer. Facility holidays: 01/01/2025, 11/27/2025, 12/25/2025. Number of holidays allowed off: 1. Start assignment restriction: 14 days 1 reference from last 3 years (Any reference type) - required for submission 1 reference from last 12 months (Manager/Supervisor reference type) - required for submission Driver’s license required for submission Certifications: • BLS (Basic Life Support), • ACLS (Advanced Cardiovascular Life Support), • PALS (Pediatric Advanced Life Support) • Skills Checklist: Yes, • References: Yes, • License Type: registered, • License State: CA, • Job Type: Travel, • Nurse/Patient: – –, • Shift Type: Day, • Contract Date: 2025-10-14, • Expected Length: 32 weeks, • Hours per Shift: 10, • Shifts per Week: 4

Job Description Construction laborer's needed. POSITIONS AVAILABLE IN THE FOLLOWING AREAS: Concrete, rebar, masonry, carpenters, operator, drilling, grading, framing, shotcrete, handyman, maintenance and labor These position start immediately after successful passing the application/screening process. Must have 1 year minimum of construction experience and some tools with reliable transportation. Expected duties: Assist in building structures for residential sites Demolitions Flat saw asphalt and concrete Mix Concrete Pump Concrete, grout, cement, sand or plaster Expected to work on scaffolds, lifts and ladders Expected to load, push and unload wheelbarrow Will be using jackhammers, shovels, skillsaw among other tools Must be able to lift 50 lbs plus Must have reliable transportation Required Experience Skilled labor 1 year construction 1 year Apply in person: Wednesdays and Thursdays 8:30am-2pm by appointment only at 727 N. Vernon Ave Azusa, CA 91702 Various job sites located in: Santa Monica, Bel-Air, Newport, Los Angeles, Manhattan Beach, PCH, Malibu and Beverly Hills. Company DescriptionPlease visit our website: visit our website:

Job Description Processing Operator (3PM-1AM) ABOUT THE COMPANY Founded in 1888, Lee Kum Kee, a Hong Kong-based global food company, specializes in creating condiments and sauces that promote Chinese cuisine worldwide. With more than 200 products to choose from, Lee Kum Kee takes the mystery out of cooking authentic and delicious Asian foods in the comfort of your kitchen. Lee Kum Kee is committed to providing authentic and innovative condiments and sauces featuring the highest quality ingredients. Armed with a unique management culture, stringent quality control, superb and innovative products, coupled with the century-long brand reputation, Lee Kum Kee has achieved unanimous recognition and won numerous prestigious awards. BENEFITS • Medical, dental, life insurance, • 401(k) retirement plan with company match, • Vacations Perform material preparation, dumping, pumping, mixing and sanitation in the processing area. ESSENTIAL FUNCTIONS · Prepare and check raw materials according to Raw Material Pick List and Production Instruction. · Transfer raw materials between warehouse storage area and processing area using forklift or pallet jets. · Operate machines to dump or pump materials into mixing tanks and mixing. · Clean up and move out containers, pallets and trash. · Insure all tools and equipment are properly sanitized and maintain a clean working station. · Ensure the use of all Raw Material follows proper FIFO instructions · Ensure all documentation related to processing is filled out properly · Follows proper HACCP and GMP standards · Perform additional assignments assigned by Production Supervisors. EDUCATION and/or EXPERIENCE / LANGUAGE SKILLS High school diploma or general education degree (GED) is preferred; or one to three months related experience and/or training; or equivalent combination of education and experience. Ability to read and write, comprehend simple instructions, short correspondence, memos and machine display information. Bilingual in English and Chinese or English and Spanish preferred. MATHEMATICAL SKILLS / REASONING ABILITY Ability to add, subtracts, multiply, and divides in all units of measure, using whole numbers, common fractions, and decimals. Ideal candidate must compute rates, ratios, and percentages and draw and interpret bar graphs. Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to read and comprehend equipment manuals and electrical diagrams for set-up control loops. Candidate must be able to deal with problems involving several concrete variables in standardized situations. PHYSICAL DEMANDS / WORK ENVIRONMENT The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands or fingers to handle or feel; reach with hands and arms; walk, climb or balance; stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 50 pounds. Specific vision ability is required, including close and distance vision, color vision, peripheral vision, depth perception, and ability to adjust and stay focus. Ability to work in rotation shifts and overtime. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; toxic or caustic chemicals, and vibration. The noise level in the work environment is usually loud. Lee Kum Kee (USA) Inc., a division of Lee Kum Kee International Holdings Ltd., has its headquarters and manufacturing facilities in Southern California with more than 300 employees. We are looking for the best and brightest talents to join our company and work together to bring the next level of success! It is Lee Kum Kee’s policy to seek and employ the most qualified persons in all jobs in a manner which will ensure equal employment opportunity as well as administer personnel actions in a manner as to not discriminate against any person on the basis of race, color, religion, national origin, age, sex, sexual orientation, disability or protected veteran status. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description Job Overview Mechanic A has responsibilities to maintain, troubleshoot and repair a variety of electrical and mechanical equipment in a processing environment. This position requires proficiency in multiple skill clusters, such as electrical controls, mechanical systems, welding, fabrication, and manufacturing processes. This person will perform low to medium level machine systems troubleshooting and repair and provide technical support for all phases of the operation. This work will be of average to considerable difficulty in the accomplishment of a variety of mechanical maintenance actions. Duties • Perform routine maintenance on equipment and facilities to ensure optimal performance., • Troubleshoot and repair mechanical, electrical, and issues as they arise., • Read and interpret schematics to understand system layouts and identify problems., • Fabricate parts as needed to replace defective components or enhance equipment functionality., • Utilize tools such as an ohmmeter for electrical testing and diagnostics., • Conduct residential painting tasks as required to maintain aesthetic standards., • Provide excellent customer service when interacting with clients or residents during maintenance visits. Mechanical • Must be able to rebuild gearboxes, power drives, and centrifugal pumps and replace mechanical shaft seals., • Must be able to install production equipment on elevated platforms., • Must be able to weld Stainless Steel. Weld quality to be acceptable for food grade applications., • Must be knowledgeable in liquid pumping principles and able to read pump flow curves., • Must be able to repair/rebuild pneumatic hoists., • Must be able to time automated equipment drives using vendors manuals and specifications., • Must be knowledgeable in the operating principles of hydraulic systems and able to troubleshoot and repair their mechanical components., • Must be knowledgeable in the operating principles of pneumatic waste system and able to troubleshoot and repair mechanical components., • Must be knowledgeable in mechanical drive fundamentals, i.e., chain drive sprocket and gearbox ratios etc., • Must be able to read piping diagrams and identify the function of various components for air and water distribution systems., • Must be able to replace Slicer/cutter/dicer blade assemblies and perform the necessary adjustments., • Must be able to replace automated equipment mechanical components., • Must be proficient in the use of standard hand tools such as wrenches, hammers, bearing pullers etc., • Must be proficient in the use of simple power tools such as drills, grinders, cut-off saws, impact wrenches, etc., • Must be knowledgeable in cleaning and degreasing techniques., • Proven experience in facilities maintenance or a related field is preferred., • Must be able to run electrical conduit and be knowledgeable of code requirements., • Strong knowledge of electrical systems and troubleshooting methods., • Ability to communicate effectively in English, both verbally and in writing., • Must be knowledgeable in programming Variable Frequency Drives (VFD's)., • A customer service-oriented mindset with the ability to work well under pressure., • Must be able to troubleshoot power distribution systems., • Must have working knowledge of electrical testing equipment such as multimeter, megger, etc., • Must be able to program simple production equipment such as metal detectors, spin dryers, etc., • Education: High School Diploma or equivalent Job Type: Full-time Pay: $28.00 - $35.00 per hour Benefits: • 401(k), • Dental insurance, • Employee discount, • Health insurance, • Life insurance, • Vision insurance Schedule: • Day shift, • Evening shift, • Monday to Friday, • Weekends as needed People with a criminal record are encouraged to apply Work Location: In person

Job DescriptionVictory Hematology and Oncology has a part time registered chemotherapy nurse positions available for a Hematology and Oncology practice in Sherman Oaks, California. At least three years of recent experience in an outpatient chemotherapy infusion setting is required at a hematology and oncology practice. Job Description: • Administer Chemotherapy, hydration and other medications under the direct supervision of a physician *Mix chemotherapy (optional, compounding pharmacy technician on site) • Perform assessments on patients within appropriate time frames., • Participate in activities to plan, measure assess and improve the quality of patient care., • Demonstrate knowledge of ambulatory infusion pump use and maintenance Access port-a-catheters and PICC lines, • Document patient care and unit activities in a timely, accurate, and concise manner., • Demonstrate knowledge of and apply safety principles., • Be Comfortable with EMR (Electronic Medical Records), • Be passionate, empathy with patients; Be reliable and motivated with great customer service skills; works well as a team. Job Requirements: • Chemotherapy Certification., • Current BLS., • California RN License., • Delighted, caring and dedicated nurses are welcome and appreciated, • Job Salary depend on experience, negotiable, • Do NOT contact us with unsolicited services or offers, • Principals only. Recruiters, please don't contact this job poster., • Chemotherapy Nurse: 5 years, • Job Type: Part-time Job Type: Part-time Pay: $45.00 - $74.00 per hour Benefits: • Paid time offMedical Specialty:, • OncologyPhysical Setting:, • Clinic, • OutpatientExperience:, • Nursing: 3 years (Required)License/Certification:, • BLS Certification (Required), • RN (Required)Work Location: In person

Job Description • Join Our Team of Highly Talented and Committed Clinical Professionals. Become a part of a well-established 5-star rating agency* Founded in 2014 in San Francisco Bay Area, Neogen Care’s vision is to transform the way healthcare is provided and received by patients in the home. We strive to improve the quality of your life with our team of specially trained nurses, therapists and reliable caregivers. As a leading provider of medical and non-medical home care services we will continue to contribute to the future of our community and support healthy lifestyles. We are looking for a Weekend Home Health Registered Nurse to join our fast-growing team. Become part of a notable company and help us achieve our goals! POSITION: Registered Nurse (Home Health) TYPE: Part Time, must work Saturday and Sunday PAY: Competitive per visit pay LOCATION: Lancaster, CA and Surrounding Areas POSITION SUMMARY: The Neogen Care Home Health Registered Nurse provides direct patient care in the patient's home under the supervision of a physician. Responsibilities include following start of care plans, providing treatment, discharges, wound care, medication administration, and working collaboratively with a clinical team to achieve positive patient care outcomes. ESSENTIAL FUNCTIONS: • Case management & follow-up skilled nursing visits in the patient's home., • Consult & develop treatment plans based on physician's orders and initial patient assessment., • Submit regular patient care progress reports to attending physician and clinical staff., • Discharge patients after consultation with the physician and clinical manager., • Provide nursing care and written care plans., • Participate in and monitor patient and family care compliance activities., • Professionally manage and coordinate the plan of care, • Complete clinical and medical documentation on all patients., • Minimum of Associate degree (or higher) in Nursing., • Current and unrestricted California Registered Nurse license., • Current CPR/BLS certification., • Minimum of 2-3 years of RN experience in Home Health within the past year, • Experience in wound care/wound vac, patient teaching, medication management, lab draws, and Peripheral IV, PICC/Central Line, IV/TPN administration, CADD pump use, Foley Catheter, PleurX, Tracheostomy Neogen Care, an essential health industry company, practices all protective measures recommend by the WHO, CDC, state, and county to safeguard our employees and patients from COVID-19 exposure to include: screening, testing, PPE, social distancing. #NCRN

Job Description • Join Our Team of Highly Talented and Committed Clinical Professionals. Become a part of a well-established 5-star rating agency* Founded in 2014 in San Francisco Bay Area, Neogen Care’s vision is to transform the way healthcare is provided and received by patients in the home. We strive to improve the quality of your life with our team of specially trained nurses, therapists and reliable caregivers. As a leading provider of medical and non-medical home care services we will continue to contribute to the future of our community and support healthy lifestyles. We are looking for a Weekend Home Health Registered Nurse to join our fast-growing team. Become part of a notable company and help us achieve our goals! POSITION: Registered Nurse (Home Health) TYPE: Part Time, must work Saturday and Sunday PAY: Competitive per visit pay LOCATION: Arcadia, CA and Surrounding Areas POSITION SUMMARY: The Neogen Care Home Health Registered Nurse provides direct patient care in the patient's home under the supervision of a physician. Responsibilities include following start of care plans, providing treatment, discharges, wound care, medication administration, and working collaboratively with a clinical team to achieve positive patient care outcomes. ESSENTIAL FUNCTIONS: • Case management & follow-up skilled nursing visits in the patient's home., • Consult & develop treatment plans based on physician's orders and initial patient assessment., • Submit regular patient care progress reports to attending physician and clinical staff., • Discharge patients after consultation with the physician and clinical manager., • Provide nursing care and written care plans., • Participate in and monitor patient and family care compliance activities., • Professionally manage and coordinate the plan of care, • Complete clinical and medical documentation on all patients., • Minimum of Associate degree (or higher) in Nursing., • Current and unrestricted California Registered Nurse license., • Current CPR/BLS certification., • Minimum of 2-3 years of RN experience in Home Health within the past year, • Experience in wound care/wound vac, patient teaching, medication management, lab draws, and Peripheral IV, PICC/Central Line, IV/TPN administration, CADD pump use, Foley Catheter, PleurX, Tracheostomy Neogen Care, an essential health industry company, practices all protective measures recommend by the WHO, CDC, state, and county to safeguard our employees and patients from COVID-19 exposure to include: screening, testing, PPE, social distancing. #NCRN

Job DescriptionSalary: $27.00 $34.00 DOE Auto Technician/Mechanic South Bay Auto Auction is seeking for an experienced Auto Technician/Mechanic to work in our Recon Department. Our ideal candidate will be able to perform inspections, diagnose and perform mechanical adjustments, repairs, and parts replacements for company, fleet, and consignment vehicles and mechanical equipment. Pay is very good and will be based on experience ( assessment will be done at interview ) Do not apply if you have not worked in new car franchise used car certification programs Responsibilities: • Must have knowledge of in-depth diagnostics and vehicle structural/frame identification abilities., • Inspect vehicles for damage, missing parts, mechanical problems and vandalism., • Diagnose problems and estimate repair costs according to appropriate guidelines., • Order repair parts as instructed and perform designated repairs (i.e. replace brake pads, rotors, radiators, gaskets, water pump, hoses, plugs, wires, distributor cap, switches, mirrors, knobs, tires, etc.), • Perform minor electrical repairs (i.e. electrical components, power windows, power, mirrors, door locks, etc.), • Check Run/Drive vehicles on sale day to ensure vehicles are operational or can start with jump box assistance., • Perform routine vehicle maintenance on company vehicles, fleet trucks and front end loaders (i.e. mechanical work on brakes, fuel pumps, alternators, air conditioning, oil changes, tire balancing and rotation, replacing batteries, etc.), • Ensure repair orders are completed accurately including use of current rates, labor and parts charges, and manufacturer updates and changes of vehicle requirements., • Perform other duties as assigned by manager or supervisor. Qualifications Education & Specialized Knowledge: • High School Diploma or equivalent preferred, • Valid Driver's License and safe driving record required., • Ability to drive vehicles with standard and automatic transmission., • ASE certification, • Minimum 3 years new car franchise or auto auction experience This Company Describes Its Culture as: • Detail-oriented -- quality and precision-focused, • Stable -- traditional, stable, strong processes, • Team-oriented -- cooperative and collaborative Vehicle Type: • Cars and light trucks SBAA offers vacation, sick, holiday, 401K, dental, vision and medical insurance. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job Description Repairs, installs and performs preventive maintenance on all production equipment to ensure that such equipment is in good operable condition at all times. Uses electrical and mechanical expertise to trouble shoot, repair, install and perform preventive and interactive maintenance on all production equipment accessories to ensure that all equipment is in good operable condition at all times. Primary Responsibilities: 1. Install, operates, maintains, checks, and trouble-shoots all types of A/C and D/C electrical equipment. Install, trouble-shoot, and repair solid state and electronic equipment as well as mechanical equipment., 2. Uses safe working practices and reports/repairs any hazard conditions at all times., 3. Inspects machines, takes any required test, and completed “all” reports and paperwork as required., 4. Perform PM and repair work in accordance with A.I.B. standards., 5. Diagnoses and employs proper procedure of troubleshooting to determine when parts need replacement and when repairs are necessary., 6. Dismantles, repairs, and re-assembles gearboxes, fans, conveyors, blowers, compressors, pump, valve, and mechanical equipment when directed., 7. Dismantles, repairs, and re-assembles electrical motors, relays, timers, and allied electrical equipment., 8. Installs and repairs electrical conduit, cables, piping, tubing, controls, and grounding as directed., 9. Operates mobile lift truck and hoisting in the performance of maintenance work. Possess knowledge of simple rigging when necessary for equipment moving and relocation., 10. Help maintain spare parts inventory for plant. EDUCATION & EXPERIENCE High School Diploma, GED or Equivalent preferred. 4 years of industrial maintenance/electrical experience required. Food/beverage processing or packaging environment preferred. KNOWLEDGE, SKILLS & ABILITIES: • Knowledge of local, state and federal electric codes, • Certified for PLC programming e.g., Allen Bradley or equivalent preferred., • Experience installing, programming and troubleshooting the following: • Programmable Logic Controllers (PLCs), • Variable Frequency Drives (VFDs), • All types of AC and DC electrical and mechanical equipment., • Electrical conduit, cables, piping, and tubing, including all necessary connections, controls and grounding. • Able to read and make proper installations of complex electrical circuits from wiring diagrams., • Able to disassemble, repair and reassemble gear boxes, fans conveyors, blowers, compressors, pumps, valves, furnaces, drives and all allied mechanical equipment related to electrical troubleshooting, • Experience troubleshooting and repairing oven combustion and safety devices., • Possesses working knowledge of hydraulic, compressed air systems and be able to read complex diagrams and troubleshoot these systems, • Experience Installing and repairing pneumatic conduit, cables, piping, and tubing, including all necessary connections, controls and grounding., • Possess working knowledge of the following equipment: • MIG/TIG/ARC welding equipment, • Gas & Plasma cutting equipment, • Power tools such as drill presses, cut off saw, lathes, mills, and table tools., • Electrical test equipment such as voltmeter, megger, ammeter, diode and SCR tester. Shift: 3rd Starting Hourly Pay: Mechanic A: $39.61 + shift differential, OT, 7 Holidays, & Vacation Pay Full Benefits Packet includes the following: Health, Vision, & Dental insurance, Life & AD&D insurance, Short- & Long-Term Disability Insurance, 401(k) & matching, Flexible spending accounts, Dependent Care FSA and Health Care FSA, Referral & Retention Bonus Programs, Uniform & Shoe Allowance, and Employee Discount Program on Products. Gruma Corporation and its affiliates, including but not limited to Azteca Milling, L.P., are committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin, ancestry, sex, gender, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, gender expression, marital status, or any other legally recognized protected basis under federal, state, or local law. The information collected by this application is solely for the purposes of determining suitability for employment, verifying your identity, and maintaining employment statistics on applicants. Applicants with disabilities may be entitled to reasonable accommodation under the Americans with Disabilities Act as well as state and local laws. A reasonable accommodation is a change in the way things are normally done which will ensure an equal employment opportunity with-out imposing undue hardship on Gruma. Please inform the company's personnel representative if you need assistance completing any forms or to otherwise participate in the application process. Company DescriptionAt Mission, we believe that good food can take you places. From our humble beginnings as a small tortilla factory in the San Fernando Valley of Los Angeles to becoming a global brand recognized worldwide, we’ve always strived to help you explore the endless possibilities of tortillas and tortilla chips. Since 1977, Mission® has been creating fresh, authentic Mexican food products you can find in your local grocery store including Guerrero, Maseca and Calidad to name a few. Mission®, a subsidiary of Gruma Corporation, is the #1 tortilla company in the U.S. and manufactures a variety of authentic Mexican products. As we’ve grown, we’ve made sure to always put an emphasis on authentic flavors, while providing healthy options that families and friends can enjoy together.At Mission, we believe that good food can take you places. From our humble beginnings as a small tortilla factory in the San Fernando Valley of Los Angeles to becoming a global brand recognized worldwide, we’ve always strived to help you explore the endless possibilities of tortillas and tortilla chips.\r\n\r\nSince 1977, Mission® has been creating fresh, authentic Mexican food products you can find in your local grocery store including Guerrero, Maseca and Calidad to name a few. Mission®, a subsidiary of Gruma Corporation, is the #1 tortilla company in the U.S. and manufactures a variety of authentic Mexican products. As we’ve grown, we’ve made sure to always put an emphasis on authentic flavors, while providing healthy options that families and friends can enjoy together.

Description Full Time Dispensing Nurse – LPN/LVN BAART Program is looking for a detail oriented and empathetic Licensed Practical Nurse / Licensed Vocational Nurse to dispense prescribed medications as part of a treatment team in partnership with Physicians and Nursing Supervisors. The dispensing nurse also shares responsibility of maintaining dispensing equipment, managing medication inventory and reporting patient treatment information. An ideal dispensing nurse candidate works cooperatively with supervisory counseling staff and demonstrates a non-judgmental and accepting attitude toward the Substance Use Disorder. Responsibilities: • Administer daily medication to patients in accordance with program policy and medical protocols., • Use automated dispensing system(s), calibrate pump and maintain dispensing equipment, • Produce and maintain appropriate records and reports as required by Company protocol, Federal and State Regulations, • Ensure compliance with security standards for the distribution and storage of controlled substances as set forth in the Code of Federal regulations, • Order, receive and stock medication in accordance with DEA and State regulations. (If granted Power of Attorney), • Provide daily assessment of patients, • Assist Nursing Supervisor to orient new nursing staff, • Current & good standing Licensed Practical Nurse (LPN) / Licensed Vocational Nurse (LVN) license in the State of California. In CA only, a CA license as a Psychiatric Technician may be substituted for nursing license., • Current CPR certification required, • EMR & computer proficiency desired, • Experience in chemical dependency preferred, self-motivated and directed, must have a positive attitude toward individuals in substance abuse treatment. Salary ranges from $30.50 to $31.50 an hour. The salary of the candidate(s) selected for this role will be set based on a variety of factors, including but not limited to, experience, education, specialty and training. BayMark offers excellent benefits: • 401K match, • Medical, Dental, Vision Insurance, • Accident Injury, Hospital Indemnity and Critical Illness Plans, • Company paid Short & Long Term Disability, • Company paid Basic Life Insurance, • Paid Time Off, • Bereavement Leave, • Flexible Sick Time Here is what you can expect from us: BAART Program, a progressive substance abuse treatment organization, is committed to the highest quality of patient care in a comfortable outpatient clinic setting. Our ultimate goal is to address the physical, emotional, and mental aspects of opioid use disorder to help each of our patients achieve long-term recovery and an improved quality of life. BAART Program is committed to Equal Employment Opportunity (EEO) and to compliance with all Federal, State and local laws that prohibit employment discrimination on the basis of race, color, age, natural origin, ethnicity, religion, gender, pregnancy, marital status, sexual orientation, citizenship, genetic disposition, disability or veteran’s status or any other classification protected by State/Federal laws. PIe6afe982ed84-37820-38650030

Job DescriptionDescription: HYDRAULIC / WET KIT INSTALLS DIESEL MECHANIC Department: Fleet & Maintenance Location: SFS Shop - Santa Fe Springs, CA Classification: Full-Time, Non-exempt Reports To Fleet & Maintenance Director Position Summary Ecology Auto Parts, Inc. is currently seeking a skilled Diesel Mechanic (Level 2) with strong hydraulic systems experience, specifically in wet kit installations for PTOs (Power Take-Off units). The ideal candidate will demonstrate technical proficiency in diesel engine systems, hydraulic setups, troubleshooting, and safety standards in heavy-duty fleet environments. This role is essential to supporting Ecology's diverse fleet of trucks and trailers to ensure uptime, safety, and operational excellence. Responsibilities To perform this job successfully you must be able to perform each essential duty satisfactorily. Other minor duties may be assigned. • Perform professional installation of wet kits, hydraulic pumps, tanks, lines, valves, and PTO systems on Class 8 diesel trucks., • Conduct diagnostics and repairs on hydraulic and pneumatic systems, including troubleshooting leaks, pressure failures, and mechanical malfunctions., • Service, inspect, and maintain diesel engines, transmissions, brakes, suspensions, and electrical components in accordance with OEM standards., • Collaborate with senior mechanics and management on build specifications and install configurations for various truck body applications., • Ensure all hydraulic and mechanical work is completed to DOT safety standards and manufacturer guidelines., • Maintain proper documentation of work orders, parts usage, and service notes in the maintenance system., • Use hand tools, diagnostic software, welding equipment, and hydraulic testing gauges as necessary for repairs and installs., • Monitor inventory of hydraulic parts and recommend restocking when needed., • Support other maintenance operations including preventative service, emergency repairs, and inspections as assigned., • Participate in safety meetings, training programs, and toolbox talks to promote a safe and compliant working environment. Requirements: Qualifications/Knowledge/Critical Skills · High school diploma or GED required; technical/vocational school certification preferred. · Minimum 3+ years of experience as a diesel mechanic, with at least 1 year specializing in hydraulic systems and wet kit installs. · Knowledge of PTO systems, hydraulic pump setups, tank configurations, and control mechanisms. · Must have own tools and experience using diagnostic equipment and power tools. · Working knowledge of diesel engine systems (Cummins, CAT, Detroit, etc.), DEF systems, electrical diagnostics, and air brake systems. · Ability to read and interpret technical manuals, wiring diagrams, and hydraulic schematics. · Proficient with Microsoft Office and Fleet Maintenance software is a plus. · Must hold a valid driver’s license; Class A or B license preferred but not required. · Ability to work independently and manage time effectively in a fast-paced shop environment. Physical Demands/Environmental Factors · While performing the duties of this job, the employee is regularly required to stand, bend, kneel, crawl, and lift tools or parts. · Must frequently lift and/or move up to 75 pounds. · Work involves exposure to dust, noise, grease, and diesel fumes. · May be required to work outdoors in varying weather conditions. · Must adhere to all company safety protocols including PPE usage and equipment lockout/tagout procedures. Compensation The Diesel Mechanic (Level 2) position offers an appealing compensation package, with a competitive hourly wage range of $25.00 to $37.00 per hour (DOE). In addition to the financial components, we provide a comprehensive benefits package, including medical, dental, and vision insurance, a 401k plan with employer matching, generous paid time off, and life insurance coverage. The final compensation will be contingent upon the candidate’s relevant experience, qualifications, and skills, reflecting our commitment to providing a rewarding and competitive remuneration to attract top talent in the industry. PLEASE NOTE: This job description is not exhaustive and is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Ecology Auto Parts Inc. is committed to providing a workplace and culture of respect, diversity, equity, inclusion, and belonging. We are dedicated to ensuring equal employment opportunity without regard to race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. Should you have a disability or specific needs requiring accommodation, please inform us. Thank you for your interest in opportunities with Ecology Auto Parts, Inc. We appreciate the enthusiasm and professionalism demonstrated by individuals seeking to join our team. Please be advised that Ecology Auto Parts, Inc. does not engage with or entertain solicitations from third-party recruiting firms for our hiring needs. We have a dedicated internal recruitment team managing our talent acquisition process. We kindly request that third-party recruitment firms refrain from submitting candidates for our open positions. Ecology Auto Parts, Inc. will not consider or entertain candidates represented by headhunter agencies for our current requisitions. Our commitment to fair and equitable hiring practices includes working directly with candidates who apply through our official channels. We believe in fostering a transparent and direct relationship with potential team members. We appreciate your understanding and compliance with this policy. If you are interested in joining Ecology Auto Parts, Inc., please visit our official careers page here: EAP, Inc. | Career Center for a list of our current job opportunities and application instructions.

Job Description Bemana is searching for a Pump Service Technician in the greater Los Angeles area. Our client is a is a leading provider of pump systems and on-site maintenance and repair services for customers in the commercial, industrial, and municipal market sectors. Position Offers • $35-45/hour, depending on experience + overtime opportunities. (If your target pay is higher, we still encourage you to apply—we could request adjustments based on experience and market conditions), • Medical, dental, and vision insurance., • 401(K) & Roth: 100% company match on the first 3%, plus 0.5 match on the 4th and 5th%., • Troubleshoot and repair all types of centrifugal pumps: domestic water, HVAC pumps (tower cooling & chilled water), submersible, column, and sump/sewage. VERTICAL TURBINE, MIXERS, PROP PUMPS and other less common pumps., • Without direct supervision, inspects, modifies, maintains, repairs, and installs pumps, electric motors, valves, and related mechanical equipment for water and wastewater systems throughout the greater Southern California region., • Troubleshoot and repair pressure reducing valves associated with domestic water booster systems., • Troubleshoot and repair sewage ejector pumps, pump controls and systems., • Troubleshoot and repair common electrical issues such as three-phase and single-phase electrical system, including capacitors and start relays., • Troubleshoot, program, and modify existing programming on variable frequency drives for both wastewater and booster pump applications., • Undertake projects including complete system replacement, circuit design, piping and system layout in cooperation with other stakeholders., • Responds to emergency situations as necessary during normal working hours and when scheduled to be on call for 24-hour emergency service., • Perform Planned Maintenance as required. Inspect pump systems and related equipment and make recommendations for repairs, replacements, or calibrations as needed., • Follows all electrical safety rules and Lock-out/Tag-out procedures., • Maintains truck tools, safety equipment, instruments, and materials, specific to pump, motors, and equipment maintenance and repairs., • Operates a variety of equipment and hand and power tools as needed to construct, repair, and maintain mechanical equipment. Maintains and cares for all equipment and tools in his/her care and use. Performs cleaning, lubricating of tools as required., • Supervise and manage workflow and project timeline for crews on projects., • Regular attendance and adherence to prescribed work schedule to conduct job responsibilities., • High School Diploma or GED Equivalent or Trade School Diploma., • The employee must regularly lift and/or move more than 25 pounds, frequently lift and/or move more than 50 pounds, and occasionally lift and/or move more than 100 pounds. If your experience matches the description above, submit your resume, and one of our recruiters will be in touch to tell you more about the position and learn more about your experience and aspirations. If your experience does not match this job description, we still encourage you to reach out to one of our recruiters, so we can learn about your professional aspirations for future job openings. About Bemana Bemana provides recruiting services to the nation's equipment and industrial sectors. Our clients and candidates value us for our specialized recruiting expertise, vast knowledge of the equipment and industrial job market, and ability to solve their most challenging employment needs. We have successfully recruited thousands of top-level professionals filling a wide range of management, sales, engineering, and technical positions across the nation. Welcome to Bemana and we look forward to getting to know more about you. Referral Program Bemana offers a $500 reward for referrals that lead to a hire. So, if this job or location is not for you, but you know someone that might be interested, send them this link and we'll send you a check if they get hired. Terms & conditions apply.

Job Description Late Shift Mechanic - Full Time - Santa Fe Springs, CA At Sulzer, you are empowered to deliver superior results. As a pioneer in industry we have a proud heritage of innovation and continue to evolve for the future. Join our story and create your own impact by developing your expertise and building solutions that help make our lives safer, smarter and more sustainable. Join our Pump Services team within Rotating Equipment Services division in Santa Fe Springs, CA as a Late Shift Mechanic to help us take our Service Center to the next level. In this role you will be accountable for: • Assembling all types of pump equipment to customer, OEM and industry standard specifications, • Disassembling equipment to gain access remove, clean and inspect components, • Inspecting & recording component measurements using instruments, tools and gages and providing inspection report, • Investigating and determining root cause failure, • Determining proper materials for repairs as per BOM, • Contouring impellers and pump casings to meet hydraulic requirements, • Setting and operating dynamic balancing equipment, • Performing final testing and inspections To succeed in this role, you will need: • Analytical and interpersonal skills, • Attention to detail, • Extensive knowledge of and ability to use hand tools, precision measuring and testing equipment and machine shop equipment, • Minimum five (5) years of pump repair experience, • Ability to work with limited supervision, • Ability to travel to and work at customer sites, • Ability to work overtime If you’re a qualified candidate with proven expertise in developing core competencies, leading teams and driving continuous improvement, take the next step and apply with Sulzer. Make the most of your career! Your benefits: • 15 days of paid time off and 11 company-paid holiday, • 401k plan with a 6% match, • Comprehensive health plan including medical, dental, vision, Life, short-term & long-term disability, • Motivating wellness program, • Employee Assistance Program Location: We are based in Santa Fe Springs, CA. We are looking forward to hearing from you! Sulzer is an equal opportunity employer, committed to the strength of a diverse workforce. 82% of our employees recommend Sulzer as a good place to work – so come and join our story, starting today!

Job Description Axis Mechanical is looking to find someone to join our team who has a interest in working in the mechanical trades. Applicants shouldbe mechanical inclined but we are willing to train anyone who may be interested. Applicants must posses a current Driver's License. We offer competitive rates, health insurance, paid time off and holidays.

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. MANUFACTURING Rocket Lab's Manufacturing team are the builders and the doers who work with our advanced machinery across our global manufacturing sites to get our satellites, satellite components, and rockets out the door. They bring the designs of our engineers to life by using advanced manufacturing techniques like 3D printing to create our hardware and are responsible for delivering our projects and missions on time and on budget to our customers. HARNESS MANUFACTURING TECHNICIAN II/SENIOR Based onsite at Rocket Lab's global headquarters in Long Beach, California, the Harness Manufacturing Technician II/Senior is responsible for building and testing components and electrical assemblies of the Rutherford rocket engine - an electric propellant pump system. Harness Manufacturing Technicians are responsible for a broad range of responsibilities including soldering, wire harnessing, PCB assembly, functional testing, operating thermal chambers, creative ideas, and offer continuous improvement recommendations. WHAT YOU'LL GET TO DO: • Follow work instructions and offer recommendations for continuous improvement., • Speak openly and elevate concerns / recommendations to Leading Hand., • Think creatively, and question status quo., • Actively contribute to local 5S work center., • Identify and highlight abnormalities., • Complete assigned special projects and scheduled jobs., • Manage multiple tasks and pivot onto exciting high priority tasks. (This position can be hired as a Harness Manufacturing Technician II or Senior Harness Manufacturing Technician Level) YOU'LL BRING THESE QUALIFICATIONS AS A HARNESS MANUFACTURING TECHNICIAN II: • 5+ years of experience with electrical harness assembly and testing to an Aerospace standard or equivalent high-reliability field., • High School diploma, GED, or 9+ years of applicable electrical and/or testing experience in lieu of diploma, • Experience assembling per manufacturing instructions and drawings. YOU'LL BRING THESE QUALIFICATIONS AS A SENIOR HARNESS MANUFACTURING TECHNICIAN: • 8+ years of experience with electrical harness assembly and testing to an Aerospace standard or equivalent high-reliability field., • High School diploma, GED or 12+ years of applicable electrical and/or testing experience in lieu of diploma, • Experience assembling per manufacturing instructions and drawings. THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • Inspect PCB and wiring assemblies meet customer workmanship standards., • Use of specialist tools and equipment; wire strippers, HiPot Testers, DMC Hand Crimpers, Banding Tools, Automatic Wire-Stripping Machine, DMC Pneumatic Crimpers, Back shell Torqueing Tools, Pin Retention Testers,, • IPC-WHMA-A-620 certified. ADDITIONAL REQUIREMENTS • Must be able to walk and stand for long periods of time, • Must be comfortable working in a production environment with extensive use of hazardous chemicals such as acids, alkalis, and solvents, • Must be able to lift up to 25lbs. unassisted., • Must be able to wear appropriate PPE for lab and electro-chemical manufacturing environment, • Must be comfortable with climbing up and down ladders, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, carrying, crawling, and maneuvering in tight spaces, • Must be willing to work extended hours and/or weekends as needed Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$25—$40 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job Description Join the team at 5 Star Medical Staffing in Los Angeles, CA Position: Registered Nurse (RN) – Special Procedures / Cath Lab Location: Glendale, CA Schedule: Days (12-hour shifts, 3 shifts/week) 13 Week Contract Pay: $3400/weekly Pay Breakdown: Hourly: $58.80/$hr OT: $88.20/hr This is a fantastic opportunity to work in a state-of-the-art facility while enjoying the lifestyle of the City of Angels! Please message me at or 323-615-5144 Ashley Specialty Recruitment Manager Position Overview We are seeking an experienced RN for Special Procedures / Cath Lab for a 13-week assignment in Glendale, California. This role is responsible for observing, evaluating, and coordinating patient care throughout all stages of invasive, interventional, and therapeutic procedures. These procedures address cardiac and vascular disorders, rhythm abnormalities, device implantation/removal, and therapeutic ablations. Candidates must have extensive Cath Lab experience and demonstrate competence in critical care, cardiac, IR, and neuro procedures. Fluoroscopy license, balloon pump/Impella experience, and moderate sedation training are required. Key Responsibilities * Provide direct and indirect care before, during, and after invasive cardiac and vascular procedures. * Monitor patients, assist with procedures, and coordinate care with the multidisciplinary team. * Support device implantation/removal, cardiac rhythm management, and therapeutic cathartic ablations. * Maintain accurate documentation and comply with hospital policies and regulatory standards. * Participate in on-call rotation as assigned. Requirements * Education & Experience: * Bachelor’s Degree in Nursing (BSN) – Preferred * RN experience in critical care, medical-surgical, or Cardiac Cath Lab/Special Procedures – Preferred * Minimum 3 years Cath Lab experience, including cardiac, IR, and neuro procedures * Balloon Pump and Impella experience required * Moderate sedation training required * Fluoroscopy license required * Licensure/Certifications: * Active Registered Nurse (RN) license in California – Required * BLS / CPR certification – Required * ACLS certification – Required * Advanced EKG certification – Preferred * NIH Stroke Scale (NIHSS) – Required Why This Opportunity? * Work in a high-acuity Cath Lab / Special Procedures unit * Gain hands-on experience with advanced cardiac and vascular interventions * Collaborative environment with a skilled multidisciplinary team * Live and work in Glendale, CA, with access to the Los Angeles area amenities Apply today to join as an RN – Special Procedures and advance your expertise in cardiac and vascular care in Glendale, CA! * On-Call: Required (one weekend per month and 1–2 additional days per week)

Job Description Employment Details: • Recognized Civil Infrastructure Consulting firm in the US & Canada, • 100% employee owned, • Full Benefits: Health, Vision, Dental, and 401K match, • Sign on bonus opporunity, • Perform engineering work in water and wastewater infrastructure and conveyance, • Work on engineering planning and design projects of large diameter pipelines, • Manage a variety of pipeline materials including: ductile iron, steel, PVC, HTPE, etc., • Design of Water / Wastewater Infrastructure (Pump stations, Lift Stations, Tanks, Pipelines), • Assist in client relations and business development pursuits across the region, • Prepare reports, develop plans, and specifications, • Prepare cost estimates for various water and wastewater projects, • Conduct hydraulic modeling, • Permitting and preparation of technical memoranda, reports, and electronic deliverables, • Data entry and analysis, • Provide engineering services during construction, • Bachelor’s degree in civil or environmental Engineering, • Registration as a Professional Engineer, • 10+ years of experience in water / wastewater treatment plant and infrastructure engineering, • Strong design management of Water/Wastewater projects for municipal clients, • Extensive experience with large diameter pipe and horizontal directional drilling, • Master’s degree in Civil or Environmental Engineering (+)

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Engine Manufacturing team is dedicated to delivering high-performance engines and advancing innovative manufacturing systems that continuously improve cost, quality, and lead time. You're not just executing on designs; you actively provide input that shapes new hardware iterations and regularly interface with engineers to make critical decisions for the Aeon R program. Having successfully developed and refined processes for our initial development engines, the team is now focused on producing flight engines at rate for Terran R's aggressive launch manifest. This is a 2nd shift position with a standard schedule of 3:00PM-1:30AM PT, Monday through Friday, with a 10% differential on top of the base rate. Please note that this position is structured around a baseline expectation of a 50-hour workweek, which may include occasional overtime as needed to meet operational goals. About the Role: As a Lead Turbo Pump Assembly Technician, you will be on the front line of the assembly and testing the Aeon-R Turbo Pump Assemblies. This is a unique opportunity to lead an experienced technical team and build the skills necessary to create and refine robust assembly and test processes. This role will be focused on leading team members through several in-house processes and support resources such as rotor balancing, hydrostatic proof testing, component assembly and component installation. About You: • 3+ years' experience working on engines, with a primary focus on engine components., • 3+ years' experience with high pressure fluid system development and testing such as hydrostatic proof, pneumatic leak check, and flow testing., • 3+ years' experience performing quality inspections, repairing, and documenting work on critical aerospace hardware., • Strong technical and interpersonal, written and verbal communication skills., • Flexible schedule and ability to work non-standard shifts, overtime, and weekends as required., • 2+ years familiarity with 5S manufacturing principles., • 2+ years familiarity with Lean Manufacturing principles., • 2+ years' experience transitioning from development into high-volume production Benefits:, • 100% health care coverage on your first day, • Quarterly wellness stipend to use on health and wellness, • Partnership with Modern Health with access to 8 therapy & coaching sessions and mental health resources, • Discounts on gym memberships, travel and entertainment through PerkSpot, • Unlimited onsite snacks, • Free lunch on Mondays and Fridays, • Annual learning and development stipend, • PPE Stipend, • Pet Insurance through Fetch, • Company Paid Life Insurance, Short Term Disability, and Long Term Disability, • Up to 12 weeks salary continuation for paid pregnancy disability leave, • 8 Weeks company paid parental leave Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$44.88—$58.08 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Job DescriptionDescription: Job Summary: The Maintenance Seamer Mechanic is responsible for maintaining, adjusting, troubleshooting, repairing, and overhauling a variety of can seamers to ensure they operate safely, efficiently, and to quality standards. Key equipment includes Angelus 61H and Continental 2003 seamers. This role also serves as a Line Mechanic for additional plant equipment in the Filling Room and related areas, including fillers, conveyors, cooking tanks, sterilizers, basket loaders/unloaders, labelers, packers, and palletizers. The role involves mechanical, hydraulic, pneumatic, electrical, and steam systems and requires a strong focus on seam integrity and food safety. Duties cover equipment set-up, changeovers, preventive and emergency maintenance, fabrication, installations, and addressing quality and safety issues. Essential Functions: • Perform all job duties in a safe and food-safe manner, following GMPs and company safety policies., • Can Seamers: Angelus 61H and Continental 2003, ensuring seam specs are met., • Filling Room & Sterilization Equipment: Hydraulic dumpers, meat conveyors, dicers, metal detectors, meat/corn/broth fillers, check weighers, can conveyors, ink jet printers, cooking tanks, sterilizers, basket conveyors, loaders/unloaders, pumps, depalletizers., • Packaging Equipment: Can dryers, X-ray machines, can and case labelers, case packers/printers/conveyors, palletizers., • Perform seam teardowns every 3 hours using manual and scope methods; document findings and take corrective action as needed., • Complete changeovers on seamers, fillers, and empty can lines as required., • Conduct deep overhauls and rebuild gearboxes/drives as needed using OEM documentation., • Carry out preventive maintenance (PM) and repetitive work orders per schedule; ensure proper documentation., • Disassemble and reassemble equipment for sanitation., • Modify or install equipment and support capital and improvement projects with the Engineering team., • Use the Computerized Maintenance Management System (CMMS) to manage all PMs and work orders., • Collaborate with the Planner/Scheduler to update and maintain work order schedules., • Communicate key updates to the Maintenance Supervisor and Lead; support Operations Leads during equipment adjustments or line issues., • Work with the Parts Coordinator to ensure availability of critical parts; properly sign out all items per maintenance policy and generate part requests as needed., • Ensure all product contact surfaces are protected during work; complete proper cleanup after each task., • Account for and clean all parts, tools, and debris after each job., • Promptly complete all required documentation and reports., • Immediately report equipment malfunctions or unsafe conditions to the Supervisor., • Maintain professional conduct with team members, contractors, and other departments., • Take initiative to resolve issues and make sound decisions when appropriate., • Train other mechanics on seamer maintenance, seam inspections, and related activities., • Operate forklifts, pallet jacks, high lifts, and other company vehicles after certification through Juanita’s Foods., • Provide personal hand tools as required for the role., • High school diploma or GED required., • Completion of formal Seamer School training required., • Minimum 5 years of experience as a manufacturing line mechanic, preferably in the food industry., • At least 5 years of hands-on experience working with can seamers and fillers, specifically Angelus and Continental seamers., • Seamer training certificates for Angelus 61H and Continental 2003 models., • Proficient in manual and scope-based seam teardown inspections, including documentation., • Working knowledge of hydraulic, pneumatic, and pump systems., • Skilled in lubrication practices for industrial equipment., • Strong troubleshooting and critical thinking skills., • Familiarity with Lockout/Tagout (LO/TO) procedures., • Experience in high-speed manufacturing environments., • Able to interpret and work from manufacturer manuals and equipment specifications., • Electrical troubleshooting experience is a plus., • Welding and fabrication experience (minimum 3 years) is a plus., • Forklift and high lift certifications are a plus., • Solid understanding of preventive, corrective, and predictive maintenance practices., • Capable of reading and interpreting mechanical diagrams and schematics., • Effective verbal and written communication skills in English., • Basic computer proficiency, including email, internet, spreadsheets, and CMMS software., • Work is primarily performed in a manufacturing plant with exposure to noise, temperature fluctuations, and industrial chemicals., • Frequent standing, walking, bending, crouching, reaching, pulling, and lifting., • Regular use of hand tools requiring gripping and repetitive motion., • Ability to lift and carry up to 50 pounds safely.

Job Description Late Shift Machinist - Full Time - Santa Fe Springs, CA At Sulzer, you are empowered to deliver superior results. As a pioneer in industry we have a proud heritage of innovation and continue to evolve for the future. Join our story and create your own impact by developing your expertise and building solutions that help make our lives safer, smarter and more sustainable. Join our Pump Services team within Rotating Equipment Services division in Santa Fe Springs, CA as a Late Shift Machinist and help us take our Service Center to the next level. In this role you will be accountable for: • Performing layouts, setting up and operating conventional machine tools as required, • Reading and interpreting all drawings, including geometric dimensioning and tolerancing, • Designing setup methods where none exist, • Instructing other shop personnel on proper machining techniques, • Continually improving methods to deliver higher quality with improved costs To succeed in this role, you will need: • Completion of a machinist apprentice program or equivalent training, • Ability to hold close tolerances and conduct component inspections, • Ability to setup machine tools: ID / OD Grinders, Turret Lathe, Engine Lathe, Horizontal Boring Mill, Vertical Boring Mill, Radial Drill, Planer Mill, • Four years of experience in machine shop operations, • Willingness to work in a team environment, • Openness to working overtime as required If you’re a qualified candidate with proven expertise in developing core competencies, leading teams and driving continuous improvement, take the next step and apply with Sulzer. Make the most of your career! Your benefits: • 15 days of paid time off and 11 company-paid holidays, • 401k plan with a 6% match, • Comprehensive health plan including medical, dental, vision, Life, short-term & long-term disability, • Motivating wellness program, • Employee Assistance Program Location: We are based in Santa Fe Springs, CA. We are looking forward to hearing from you! Sulzer is an equal opportunity employer, committed to the strength of a diverse workforce. 82% of our employees recommend Sulzer as a good place to work – so come and join our story, starting today!

Job Description Job Position: Water Well Driller Location: Oahu and Kauai Pay: ($55,000 - $100,000 per year) based on experience Overview We are seeking a skilled and dedicated Drill Rig Operator to join our team in the water well industry located in Hawaii. The ideal candidate must have a strong mechanical background and experience with various drilling Methods (mud and air rotary) and experience with submersible pump installation. As a Driller, you will play a crucial role in the maintenance and operation of drilling equipment and ensure the safe and efficient execution of drilling projects. CDL is required. Forklift certification required. Duties Operate drilling rigs and associated equipment, ensuring compliance with safety regulations and OSHA standards. Perform routine maintenance on drilling equipment, including and support equipment. Maintain accurate records of drilling operations, including depth, and other relevant data. Apply housekeeping skills and have a positive work ethic to promote safety and efficiency. Please submit a resume. This is an opportunity to work throughout the state of Hawaii Job Type: Full-time Pay: negotiable based on experience 30 day evaluation period. Must have the ability to commute or relocate. Position available immediately. #hc194977

Job Description Seeking qualified individuals for troubleshooting, repair, maintenance, and installation of rotating equipment. This Job requires experience with repairs of pumps, motors, drives and rotating equipment for the water and waste-water industries. Would like you to have experience and working knowledge of constant & variable pressure activated pump control systems; various types of pumps and related piping; pressure reducing valves; transducers; pressure switches; relays; etc. Top candidates will be experienced with: submersibles; frame & close coupled end suction centrifugal; AODs; turbines/ mixes flows; split-cases; propellers; mixers; motors; electrical; alignment; balancing. If you are mechanically have a good attitude but lack some of the above referenced skills, we offer on-the-job training for the right candidates. We require candidates to have a good driving record, be customer service oriented with a good attitude. Looking for someone that will work overtime and weekends or nights if needed. We offer competitive compensation and benefit packages based on skills and experience with additional opportunities for overtime, on-call compensation, and schooling. Paid Vacations, Holidays, Sick days, and Health insurance plans are available. We perform a DMV driving report and drug screen on all potential new hires.

Job Description Do you want to grow with us? At DXP we are passionate about what we do and driven to be the best solution for our industrial customers. Since 1908 DXP has been dedicated to the highest quality of customer service through our expertise of the products we distribute and the technical services we perform with a sense of individual pride and company spirit. Throughout your career with DXP, we will encourage and empower you to take an active role in identifying and driving your development, so you feel total confidence in your ability to achieve ongoing success. We aspire to be the best solution for the Industrial customers' needs for MROP products and services through our Innovative Pumping Solutions, Metal Working, Supply Chain Services and Service Centers. Check out our many videos to learn more! Responsibilities of the Senior Field Service Technician include In-field Repair and Replacement of: • Remove and Replace Pumps and Motors, • Laser Alignment of Pumps and Motors, • Vibration analysis preferred, • Start-ups & troubleshooting, • Mechanical Seal Changes, • API and ANSI Pumps, • Centrifugal and Plunger Pumps, • Must be proficient with precision measuring instruments, • Knowledge of dynamic balancing a plus Qualifications of the Senior Field Service Technician include, but are not limited to: • Must possess a minimum of 10 years experience working in the field in pump rebuilding, • Must be flexible, and willing to work both in the field, as well as in a shop environment, • Must possess extensive knowledge of rebuilding centrifugal pumping equipment, • Acceptable driving record according to company guidelines #LI-JG1 #zrjg Additional Information - • Physical Demand: Ability to lift up to 50 lbs., • Working Conditions: Working in potential weather situations, rain/snow, • Training/Certifications: Ability to perform laser alignments and ability to take vibration readings preferred, but not mandatory., • Shift Time/Overtime: First Shift with Overtime as required, • Travel: Most job sites are about an hour drive from Denver. Acceptable driving record required according to company guidelines, • Education: High School Diploma or GED Location: USA:CA:Anaheim DXP is always looking for individuals who want to join a team of employees who have the desire to achieve remarkable accomplishments together. The culture of the organization is supportive and goal oriented with high expectations, yet it is an environment where the team spirit inspires everyone to do their best. All DXP employees play a vital part in the organization and are treated with respect. By applying to DXP, you will have the opportunity to speak with some of the most respected professionals in the industry. DXP offers a comprehensive benefits package including: Medical, Dental, Vision, Flexible Spending, 401(k), paid holidays, Life and Disability Insurance, and additional supplemental products. Minimum Required Salary and benefits commensurate with experience. We are an equal opportunity employer. Except where prohibited by state law, all offers of employment are conditioned upon successfully passing a drug test. This employer uses E-Verify. EOE/M/F/D/V

Job DescriptionDescription: MNS Engineers, Inc. (MNS) is a fast-growing profitable multi-service infrastructure consulting firm offering planning, construction management, civil engineering, and surveying services throughout California. With nine offices throughout California, the Company has provided services to the transportation, water resources, government services, and federal markets for over 60 years. We are well positioned in the marketplace, and on a trajectory to continue our geographic services expansion. MNS is hiring a Project Manager to apply technical skills and leadership of planning, design and management of transportation projects and related infrastructure for clients in the public sector. MNS is searching for a strategic Design Project Manager and people leader who will support the growth of our Water Resources department. While we support a hybrid/remote working atmosphere this person will need to be geographically located in either the Greater San Francisco Bay area, the Central Coast, Orange County/Los Angeles County, or the Inland Empire to be within commutable distance to our clients and projects. This position is ideal for someone who thrives with technical leadership related to municipal water and wastewater systems while valuing mentorship, autonomy, and the opportunity to build and lead a high-performing team of engineers. MNS offers a unique opportunity to grow your career with intention. We’re not a giant firm—we’re proudly midsized. That translates into a more flexible, entrepreneurial environment where individual contributions have a real impact, while still benefiting from the resources and reach of larger organizations. Our culture supports professional autonomy, innovation, and meaningful collaboration across offices. Because of this, we are proud to be recognized with the Great Place to Work certification for the second year in a row. This role will have a direct impact by serving as the client manager for projects and may also take on responsibilities to cultivate new industry relationships, in coordination with and support from the Engineering Market Leader, Business Development Manager, and other internal leaders and support staff. In this consulting engineering role, the ideal candidate will apply their technical expertise and leadership to the planning, design, construction, operation, and management of municipal water and wastewater systems—including, but not limited to, treatment plants and facilities, pipelines, pump stations, conveyance infrastructure, and storage facilities. Responsibilities: Water/Wastewater • Manage detailed planning and design efforts for a wide array of water and wastewater projects, ranging from collection and distribution to treatment and reuse with particular emphasis on projects associated with municipal scale systems. Including, but not limited to a combination of the following: treatment plants and facilities, pipelines, pump stations, conveyance infrastructure, and storage facilities., • Oversee work related to accepted engineering practices and techniques for water and wastewater treatment process and collection/distribution design., • Manage and participate in the development of engineering reports and studies for water and wastewater projects including treatment and collection/distribution., • Leverage existing, and build new, relationships to identify, position for, and pursue projects to maintain a backlog of work. General • Independently applies extensive and diversified knowledge of principles and practices in broad areas of assignments and related fields, • May also be responsible for the cultivation of new and maintenance of existing clientele, • Uses advanced techniques in the modification or extension of theories and practices of sciences and disciplines to complete assignments, • Works on a major project or several projects of moderate scope with complex features, • Prepares and reviews complete project documents for conformity and quality assurance, • Assists upper-level management and staff as a technical specialist or advisor, • Supervises all staff necessary to complete assignments, • Sets scopes, budgets, and schedules for assignments, • Prepares proposals to provide professional services under the direction of Principal Engineer, • Receives supervision and guidance relating to overall objectives, critical issues, new concepts, and policy matters, • Represent company at industry functions and assume leadership positions when possible, • Conducts job performance evaluations, • Assists with recruitment, • Primary point of contact with clients and approving agencies, • Responsible for project profitability, • Bachelor’s Degree in Engineering from an accredited program, • Professional Engineer License from the State of California, • Valid California driver’s license, • Continuing education as required for license and industry change developments, • Excellent oral and written communication skills, • Strong technical writing skills, • Ability to work on multiple projects of moderate size or portions of major projects, • Ability to design a complete project, system, component, or process, • Ability to formulate and solve problems, • Proficiency with Microsoft Software (Outlook, Word, Excel, PowerPoint), • Proficiency with specialized computer software: Autodesk Civil 3D, and various modeling software

Job DescriptionBenefits/Perks • Flexible Schedule, • Competitive Pay Responsibilities • Conduct routine maintenance on swimming pools and/or spas to make sure theyre clean and operating efficiently, • Report any needed repairs to our office, • Net pool surfaces, brush walls, vacuum pools, test water, empty skimmer and pump baskets, add needed chemicals, • Keep customers gates shut/locked to prevent unnecessary accidents, • Keep a record of completed pools, added chemicals, and turn in time sheets weekly, • Develop and execute preventative maintenance measures to keep our equipment operating efficiently and prevent any safety risks, • Handle additional maintenance tasks as neededQualifications, • Prefer High school diploma/GED or equivalent, • Prefer some maintenance experience, • Must speak English, • Must have drivers license and insurance, • Must have own truck, • Prefer knowledge of swimming pools, swimming pool equipment and chemicals, • Prefer understanding of chemical safety, • Excellent work ethic, communication skills, time management skills, and attention to detail

Job DescriptionSalary: $75,000-$90,000 Company Description At Paulus, we combine our long history of underground wet utility craftsmanship with effective techniques to provide reliable water, sewage, and stormwater solutions. We integrate precise workmanship with quality engineering to build long-lasting, sustainable systems. Our diverse portfolio spans public works, commercial, and industrial projects, with contracts ranging from thousands to multi-million dollars. We offer comprehensive pipeline services that include sewer, water systems, drainage, pump stations, and specialty wet utility projects, handling projects of all scales from single-day and emergency work to large-scale endeavors. Role Description This is a full-time on-site role located in our Anaheim, CA office. The Safety Supervisor will lead the development, implementation, and continuous improvement of our safety programs across our organization. This role is critical in fostering a culture of safety, ensuring compliance with regulatory standards, and driving initiatives that reduce risk and enhance operational safety performance. To be successful in this role, the ideal candidate would have excellent communication skills and attention to detail, with a deep understanding of the construction industry and the ability to successfully manage multiple projects. Duties & Responsibilities Design and implement new safety processes tailored to our construction operations. Audit, update and promote awareness of the companys Injury and Illness Prevention Program (IIPP)/(HIIPP), emergency action plans, and hazard communication protocols. Submits recommendations for improvements and additions to the safety management program including emergency preparedness, accident prevention, general safety, and risk management. Lead investigations and root cause analyses of incidents and partners with the Operations Manager to implement corrective actions to prevent recurrence. Deliver safety training to construction workers on general and job-specific hazards. Ensure all personnel are informed about new procedures, equipment, or hazards introduced to the workplace. Conduct regular site inspections and audits to ensure adherence to OSHA/CALOSHA and company safety standards. Maintain accurate records of safety incidents, training sessions, and corrective actions. Collaborate with HR and management to ensure policies align with legal and organizational requirements. Serve as a safety role model and mentor for field teams. Encourage reporting of unsafe conditions and foster a no-retaliation environment. Participate in safety committee meetings and contribute to strategic safety planning. Other duties as assigned. Skills & Qualifications Minimum of 5 years of safety experience, preferably in the construction industry. Excellent communication, training facilitation, project management, and organizational skills. Self-starter with the ability to manage multiple projects and deadlines independently. Excellent interpersonal skills and the ability to collaborate across departments. Extensive knowledge of company safety policies and applicable Occupational Safety and Health Administration (OSHA/CALOSHA) standards. Proven experience in developing and improving safety programs. Certification in safety (e.g., CHST, CSP) is a plus. Physical Requirements Prolonged periods of sitting at a desk and working on a computer. Physically able to conduct inspections and carry equipment used for inspections. Ability to travel throughout job sites as required to conduct safety inspections. Walk on uneven terrain including paved areas, gravel/rocks, and dirt/sand is required to access various locations on the construction sites. Must be able to lift up to 25 pounds at a time. Benefits Overview We offer competitive company benefits to eligible positions, such as : • 100% Employer Paid Medical and Dental Insurance (Bronze level), • 401(k), • Discretionary Company Bonus, • Paid Vacation and Holidays, • Tuition Reimbursement, • And more! The salary range for this position is between $75,000 to $90,000 per year. • This range is indicative of projected hiring range, however base annual salary will be determined based on a candidates work location, skills and experience. In accordance with the California Fair Employment and Housing Act (FEHA), Paulus Engineering, Inc. is committed to providing reasonable accommodations to qualified individuals with disabilities. If you require an accommodation to participate in the application process or to perform the essential functions of this position, you may request one at any time by contacting Human Resources. The company will engage in a timely, good faith interactive process to determine appropriate accommodations, if any, that do not impose an undue hardship. We are committed to equal employment opportunity and prohibit discrimination and harassment based on race, national origin, sex, religion, color, disability, marital status, protected veteran status, sexual orientation, gender identity, gender expression, genetic information, citizenship, or any other characteristic protected by law. Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act.

Job Description Job Description for Insulation Processor: Prepares the fabrication, manipulation, and assembly of fiber-shaped materials for a textile research, development, and manufacturing company in Gardena. Pay: $20 -$22/hr DOE Hours: 2nd shift: 2 pm–10:30pm; 3rd shift:10pm–6:30am, M-F + OT Responsibilities of an Insulation Processor: • Processes glass yarns involving operations such as skeining, pump leaching, washing, draining, coating, and drying of yarns, and leaching various weights and weaves of cloths, • Processes glass fiber cloth and fibers, involving such processing as caramelizing, continuous leaching, re-rolling, lift and drain leaching, washing, and drying and firing, • Operates and controls support equipment associated with the leach lines such as the tank farms, acid recovery and neutralization, and filter press (waste) management, • Processes rayon fabric involving skeining, pre-carbonization, continuous firing, acid dipping, washing, and grading., • High temperature oven treating of yarns, fibers, and cloths, • Processes carbonaceous materials involving low temperature tank carbonizing, re-rolling for graphite firing, and batch oven final firing of carbon and graphite cloths, yarns, webs, and chopped fibers, • Starts-up and closes-down all equipment, threads-up and monitors equipment feeding and take-off operations, • Prepares various production and quality reports and maintains logs., • Prepares samples for quality and performs other quality inspections such as measuring for thickness, length, and weight. Visually inspects material for defects and non-conformities., • Performs minor maintenance and reports malfunctioning of equipment, • Must be able to work outside in all types of weather, • Backhoe and tractor operation experience preferred but not required, • Experience with hand-held power tools, light equipment, and two-way radios preferred, • Must possess a valid driver’s license and have a clean DMV record, • Strong accuracy and attention to detail skills, • Positive and professional attitude and demeanor, • Must pass a basic physical and drug test, • Must pass a lifting test of 50 lbs. and be able to push and pull 50 lbs., • Must be able to walk and stand for extended periods of time and access all areas of the park, • Must be able to stoop, bend, and stand on scaffolding or climb ladders up to 25 feet Company DescriptionExpress Employment Professionals is one of the top staffing companies in the U.S. and Canada. Every day, we help people find jobs and provide workforce solutions to businesses. Express has more than 800 franchise locations that provide a full range of employment solutions that include full-time, temporary, and part-time employment in a wide range of positions, including Professional, Light Industrial, and Office Services. We will consider all qualified applicants for employment, including those with criminal histories, in a manner consistent with state and local laws including the City of Los Angeles Fair Chance Initiative Hiring Ordinance.Express Employment Professionals is one of the top staffing companies in the U.S. and Canada. Every day, we help people find jobs and provide workforce solutions to businesses. Express has more than 800 franchise locations that provide a full range of employment solutions that include full-time, temporary, and part-time employment in a wide range of positions, including Professional, Light Industrial, and Office Services.\r\nWe will consider all qualified applicants for employment, including those with criminal histories, in a manner consistent with state and local laws including the City of Los Angeles Fair Chance Initiative Hiring Ordinance.

Job DescriptionBenefits: • Competitive salary, • Flexible schedule, • Health insurance Knowledge: • Familiarity with pump and motor function and design, • Understanding of machining speeds, feeds, and tooling, • Knowledge of pump and turbine components, critical fits, and surfaces, • Proficient at operating boring mills, lathes, mills and grindingJob Responsibilities:, • Fabricate parts and tooling, • Use precision measuring tools, • Inspect machinery and adjust as needed, • Ensure compliance with safety regulations, • Work with the mechanics to find repair solutions, • Operate lathes, mills, horizontal boring mill safely and efficientlySkills and Abilities:, • Perform high-quality, efficient work independently, • Proficiency with measuring equipment (ID & OD micrometers, dial indicators), • Expertise in advanced machining operations, including complex parts and milling setups, • Complete company documentation accurately and promptly, • Must be proficient in the use of all types of gauges, micrometers, verniers, etc. Hoist fixtures, chucks, collets, steady rests, etc. Normal hand tools for machinists. Drills, taps, honing equipment, bars, etc., • Must have a well-rounded knowledge of fabrication and assembly techniques, tools and equipment, materials and shop equipment., • Must know the working qualities of a wide variety of materials including cast iron, steel, aluminium, copper, brass and other metals and plastics., • Must possess good mechanical aptitude demonstrated as success in previous machine operation or like activities., • Must possess good manual dexterity and hand-eye coordination., • Strives to continuously build knowledge and skills; Shares expertise with others., • Listens, gets clarification and communicates cordially and positively with fellow employees., • Ability to read, write, verbalise and comprehend instructions and correspondence at the highest levels., • Exhibits objectivity and openness to others' views; Gives and welcomes feedback., • Includes appropriate people in decision-making process., • Prioritises and plans work activities; Uses time efficiently., • Approaches others in a tactful manner; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments., • Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality., • Meets productivity standards; Completes work in timely manner; Strives to increase productivity., • Observes safety and security procedures; Reports potentially unsafe conditions; Uses equipment and materials properly., • Changes approach or method to best fit the situation.Axis is looking for full time or part time skilled machinist. We offer flexible hours and time off requests.

Job Description The Sales Engineer/Estimator holds the pivotal role of promptly responding to Requests for Quotations (RFQs) by engaging with customers and meticulously estimating the diverse range of materials, labor, components, and outside services essential to craft comprehensive quotes that align precisely with our customers' requirements. This position orchestrates a wide spectrum of projects, collaborating seamlessly with Purchasing, Fabrication, Assembly, and Installation departments to ensure seamless adherence to project specifications, encompassing quality, cost-efficiency, and timeliness. Requirements Key qualifications for this role include: • minimum of 5 years' experience in estimating industrial machinery within a manufacturing setting, showcasing expertise in various contract types like Lump Sum, Time and Materials, Fixed Fee/Cost Reimbursable, and adeptness in discerning labor, material, and time necessities through proposal, blueprint, and specification analysis., • Proficiency in developing detailed Bills of Materials for Skids, Piping, Storage Tanks, Vessels, and Ducting, coupled with intermediate-level skills in Microsoft Project, Word, and Excel, is essential., • Additionally, the ideal candidate should demonstrate strong project management skills, alongside impeccable mathematical acumen and a knack for fostering relationships, instrumental in driving customer satisfaction, retention, and sales revenue. Moreover, the role demands the ability to make informed decisions encompassing complex sales/profit dynamics, adeptness in scrutinizing subcontractor and vendor quotes, conceptual estimating, and quantity take-offs. Adaptability to evolving priority needs, the capability to bid on turnkey projects encompassing multiple work disciplines (e.g., Pipefitter, Millwright, Welder, Fabricator), and knowledge of fabrication methods are crucial attributes. While a Bachelor's degree in Mechanical Engineering, Mathematics, or a related field is advantageous, experience in estimating equipment like Plating Lines, Washer Systems, Tanks, Piping, Water Treatment Systems, Pump and Filtration Skids, and familiarity with fabrication methods serve as additional assets for this role.

Job Description Overview Ansible Government Solutions, LLC (Ansible) is currently recruiting for a Cardiac Catheterization Laboratory and Vascular/Interventional Radiologic (IR) Technologist to support the Long Beach VA Health Care System located at 5901 E 7th St, Long Beach, CA 90822. The technologist will participate and assist the cardiologist in Catheterization Laboratory. This includes but is not limited to operating the C-arm and supporting the cardiologist in the Catheterization Laboratory suite. This is a full-time, long-term opening with terrific compensation and benefits. The selected candidate(s) will perform highly specialized exams. This revolves around complex interventional procedures (IR), which includes but is not limited to vascular angiography (IR) examinations. The technologist must also be able to manage the workstations for the Picture, Archive, and Communication System (PACS). Services will be provided Monday-Friday, 7:30am-4:30pm with minimal overtime. If you accept employment with Ansible, you must also acknowledge that any assigned schedule is subject to change at the direction of either Ansible or its customers. Ansible is a Service-Disabled Veteran-Owned Small Business (SDVOSB) providing Federal customers with solutions in many arenas. Our customers face wide-ranging challenges in the fields of national security, health care, and information technology. To address these challenges, we employ intelligent and committed staff who take care of our customers’ success as if it is their own. Responsibilities • Responsible for coordinating ordering all Cath Lab specific supplies with Logistics and Prosthetics including catheters, balloons, stents, sheaths, etc., • Coordinate all communication with vendors and schedule their visits, • Scrub, circulate, monitor, and operate equipment on the most complex examination and treatment procedures including intra-aortic balloon pump therapy for critical ill patients, • They assure medications are properly labeled and available for physician administration, • They have a functional knowledge of the cardiac medications use, appropriate doses, and side effects, • They assist with training and mentoring other technicians, nurses, nursing students, and cardiology fellows, • They assist the cardiology manager with quality control and performance improvement activities, • They work with physician to complete both diagnostic and interventional invasive cardiac procedures including: LHC, RHC, PTCAs, Stent placement, IABP, IVUS, OCT, pressure wires, percardiocentesis, temporary pacemakers, radial artery procedures, peripheral procedures, permanent pacemaker placement and AICD placement, • Monitors the progression of procedures requiring independent judgment and anticipate need to provide specific instrument and/or catheters, • The Cardiac Cath Lab Technician has the intimate knowledge of vascular and coronary anatomy and physiology related to cardiovascular function, • The technologist serves as scrub assistant to the Cardiologist for device implantation including pacemaker and defibrillators and is knowledgeable of sterile technique, surgical tools, and techniques of electrocautery and suturing., • Assist in fluoroscopy with the internal and external placement of cardiac pacemaker, • The technologist must be familiar with a wide variety of computerized equipment. This includes angiographic (IR), digital fluoroscopy, PACS viewing stations, and hospital computer systems such as VISTA and CPRS, • Ability to scrub, circulate, and monitor advanced procedures (including electrophysiological) to include intravascular ultrasound, OCT, FFR, Acists device, Angiojet, filter wires, permanent pacemaker insertions and AICD insertions, • Knowledge and understanding of waveforms from the great vessels and all chambers of the heart including the ability to recognize and distinguish normal from abnormal, artifact from abnormality, and forewarn the physician of an impending life-threatening situation, • Licensed in a State, Territory, or Commonwealth of the United States or the District of Columbia, • Certified in general radiologic technology by the American Registry of Radiologic Technology (ARRT) (R), • American Heart Association (AHA) Basic Life Support (BLS) certification, • Knowledge of the concepts and practices of Catheterization Laboratory and vascular-interventional modality, including balloon angioplasty, stenting, intra-aortic balloon pumps, pacemakers/defibrillator implantation, • Knowledge in teaching/instructing procedures in the interventional lab, • Ability to communicate with staff and cardiologists, • Knowledge of radiation protection standards, minimum radiographic exposure techniques and employing lead shielding when performing standard or fluoroscopic procedures, • Knowledge of instructional techniques to educate newly hired or promoted technologists or radiology residents of the function of the exams All candidates must be able to: • Sit, stand, walk, lift, squat, bend, twist, and reach above shoulders during the work shift, • Lift up to 50 lbs from floor to waist, • Lift up to 20 lbs, • Carry up to 40 lbs a reasonable distance Powered by JazzHR DPaUOxnhhc

Job DescriptionDescription: Job Title: Commercial Pool Technician Territory: Miami / Ft Lauderdale Territory Reports To: Account Manager Supervises: N/A Job Classification: Full-Time, Hourly, Non-Exempt Salary Range: The salary range for this position is $25-$35 per hour, and is dependent on multiple variables, including location, experience, and territory. This position is temporarily remote; Position will be in-office in the future. SUMMARY OF ESSENTIAL DUTIES AND RESPONSIBILITIES The main role of the Commercial Pool Technician is to provide technical expertise, training, and support for existing and prospective clients. Additionally, the daily role will be to visit clients per schedule, perform diagnosis, repair, and replacement of commercial aquatics equipment, test water chemistry, adjust controllers and programming, clean and maintain chemical feed equipment, as well as performing pump room inspections and submitting work orders for all issues found in pump rooms and/or equipment. Key Responsibilities Include: • Onsite visits to new and existing clients on a regular basis, • Train clients, channel partners, etc. on chemical feed systems and VivoPoint software, • Provide technical support, repair, and installation of VivoPoint chemical feed systems, including controllers, modems, feed devices, tubing, injectors, etc., • Provide technical support and perform installations, repairs, and maintenance on pumps, filters, heaters, etc., as needed, • Perform warranty repair and required maintenance of VivoPoint chemical feed systems, • Provide regular chemical water tests and recommendations to clients, • Take photo documentation of job sites, projects, and work completions as requested, • Provide material and labor cost estimates for repairs and installations as requested, • Record all service visit information on VivoPoint via entering manual readings, entering/updating service orders, and completing equipment profiles, • Record detailed notes on all service visits in NetSuite, • Communicate visits, repairs, and follow up information to supervisors in a timely manner, • Must wear appropriate PPE at all times, • Must communicate any needs for specialty tools, PPE, training, or support to managers immediately upon discovery of need, • Perform regular inventory of parts and equipment within your possession as requested, • Communicate with managers and billing department regarding job and project completions and parts used in a timely manner, • Must be able to gather parts and equipment from supply houses and other locations as requested, • Attend meetings, trainings, and company gatherings as needed, • Additionally, duties may be assigned based on changes in client needs and in company needs and services offered Requirements: QUALIFICATIONS • Excellent interpersonal communication skills, • Must maintain the highest level of professionalism at all times: must maintain a professional appearance, and must have a friendly and professional attitude, • Must possess high organizational skills and be detail oriented, • Maintain a strong work ethic, be self-motivated, and have a high sense of responsibility, • Strong computer skills in MS Office (Email, Word, Excel, Calendar), GSuite (Gmail, Google Sheets, Google Docs, Calendar), or similar., • Strong knowledge of commercial water chemistry and balancing water chemistry, • Strong knowledge of various manufacturers’ circulation and filtration systems and chemical automation systems and chemical feed devices, • Exceptional knowledge of swimming pool regulations and codes, • Ability to travel off-island and overnight when needed, • Ability to work nights and weekends as needed, • Experience and first hand knowledge of electrical and plumbing systems and use of power tools, • Must be able to lift, move, and carry up to 75lbs SUPERVISORY RESPONSIBILITIES • N/A EDUCATION and/or EXPERIENCE • 2+ years of experience in the aquatics industry required, • 2+ years of technical work experience with commercial aquatics that includes experience with water chemistry and balancing, electrical and plumbing systems, • 2+ years of technical work experience with installing, repairing, maintaining commercial circulation and filtration systems and chemical automation and chemical feed devices, • Currently or previously held CPO license preferred, • Valid driver license that has been valid for at least the last 2 years, • Must be over the age of 21, • Ability to communicate effectively in English. Bilingual (Spanish) a plus!, • Successfully pass a thorough background check, including a DMV/driving record check

Job Description Flo-Services Inc. is searching for a Journeyman California State Certified Licensed Electrician that can be trained to also perform mechanical installation/field service. The ideal candidate for this position should be career orientated and possess the required skills, be willing to learn multiple trades, possess critical thinking skills, and be open to working outdoors. Applicant also must be willing to travel and stay overnight for certain jobs. Flo-Services is a contracting company based in Burbank, CA which specializes in performing maintenance, repairs, installation and modifications to water, wastewater, and storm water equipment. We also perform sales in water and wastewater equipment. Flo-Services has a General “A” Engineering California State Contractor’s License, a C10 Electrical California State Contracting License, and a C61/D21 pump and repair machinery California State Contractors license. Flo-Services is willing to properly train the right individual on all the equipment we repair, service, maintain and install. As well as provide the required safety training to include becoming certified in confine space entry, hazmat, first aid and CPR training. Flo-Services Inc. is a drug-free company. We comply with federally mandated DOT drug-free guidelines. Applicant must pass drug screening, pre-employment physical, background check, and DMV record clearance. Basic Duties and Responsibilities to include: • Visual, physical, and mechanical inspection of water/wastewater systems and processing equipment., • Replacing water piping and valves., • Ability to comfortably lift up to 70lbs of equipment, • Will be expected to professionally conduct and represent the company with relation to homeowners, city inspectors, utility inspectors, various municipal field contacts., • Open to entering below grade confined spaces., • MUST have a CLEAN driving record, • Willing to work overtime when required.

Job DescriptionBenefits: • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off, • Training & development, • Vision insurance, • Competitive salary, • Employee discounts Desired Qualifications: • Performs inspections on the installation, modification, maintenance and repair of electrical, electro-mechanical, electronic, and digital systems of traffic signals, highway lighting, booster pump station, sewage treatment plants, storm drain pump station, CDS units, low flow diversion, water disinfection plants and water well pump and electrical panels, and related systems., • Must be able to monitor electrical work in a pump station, sewage treatment plant, water booster pump station, and all electrical panels related to dam water valve operations. Typical inspections include installation of traffic signal and lighting conduits, pull boxes, wiring, concrete foundations, standards, signal heads, controller cabinets and traffic signal detector loops, major electrical services and gear such as those for industrial or commercial use including pump stations, spreading grounds and dams., • Must be able to read and understand complex project plans and specifications, ensure that code requirements and safe work practices are followed, prepare reports, and maintain accurate inspection records.

Job Description Ready to maximize your earnings potential while building a stable career with an 85-year-old family-owned manufacturer? Our Brea-based client needs an experienced CNC Machinist to fill their last remaining first shift lathe position. The Opportunity Our client is an established precision manufacturer in Brea, CA specializing in custom electric motors. With 200+ employees and a modern 40-person machine shop, they're experiencing unprecedented demand. This means significant overtime opportunities now (55-60+ hours/week) with a return to standard first shift once their new climate-controlled facility upgrades are complete. Pay: $25-$32/hour + daily/weekly overtime premiums Current Schedule: 4:00 AM - 3:30 PM Mon-Fri + mandatory Saturdays (temporary for backlog) Future Schedule: 6:00 AM - 2:30 PM Mon-Fri (standard first shift) Your Impact As a CNC Machinist, you'll operate our currently idle lathe to help tackle our production backlog. You'll machine precision motor components, maintaining ±0.001" tolerances while contributing to our lean manufacturing initiatives. This role directly impacts our ability to meet customer commitments and grow the business. Key Responsibilities • Set up and operate CNC lathes with Fanuc controls to produce motor shafts and components, • Machine families of similar parts in aluminum and steel, holding tight tolerances, • Read blueprints and make minor G-code edits at the machine (no complex programming), • Perform in-process inspections using micrometers, calipers, and height gauges, • Complete full production cycle from setup through teardown with quality documentation, • Potentially run multiple machines as you gain proficiency, • Support lean manufacturing and continuous improvement initiatives Required Qualifications • 3+ years recent CNC lathe experience (Fanuc controls strongly preferred), • Proven ability to read blueprints and use precision measuring instruments, • Experience with production machining and repeat part families, • Physical ability to lift 40 lbs and stand for extended periods, • Strong attendance record and commitment to safety, • Availability for early morning starts and mandatory Saturday overtime Preferred Qualifications • Experience with live tooling for drilling and slotting operations, • Background in motor, pump, or similar component manufacturing, • Bilingual English/Spanish, • Experience in lean manufacturing environments What Sets This Apart ✓ Immediate overtime earning potential during high-demand period ✓ Stable, recession-proof industry with 85+ years of success ✓ Brand-new A/C system installation for summer comfort ✓ Clear advancement opportunities (Lead, Programmer, Supervisor roles coming) ✓ Comprehensive benefits from Day 1: medical, dental, vision, life insurance ✓ 401(k) with match, profit sharing, and growing PTO ✓ Family-owned company culture that values long-term employees ✓ In-house maintenance and tool crib support Ideal Candidate We're seeking someone who values stability and consistency over constant variety. If you appreciate predictable work, mastering your craft on familiar part families, and leaving work stress at work, this is your opportunity. Perfect for experienced machinists ready to settle into a long-term role with excellent work-life balance.

Job Description Do you want to grow with us? At DXP we are passionate about what we do and driven to be the best solution for our industrial customers. Since 1908 DXP has been dedicated to the highest quality of customer service through our expertise of the products we distribute and the technical services we perform with a sense of individual pride and company spirit. Throughout your career with DXP, we will encourage and empower you to take an active role in identifying and driving your development, so you feel total confidence in your ability to achieve ongoing success. We aspire to be the best solution for the Industrial customers' needs for MROP products and services through our Innovative Pumping Solutions, Metal Working, Supply Chain Services and Service Centers. Check out our many videos to learn more! Summary: Under the direction of the Sales VP, the Sales Professional will develop strategic plans and forecasts for accounts, communicate effectively internally and externally, resolving customer issues proactively, grow and maintain sales territory, identify new sales opportunities, understand customer visions and supply chain objectives to provide proactive solutions, build relationships with decision makers, exceed sales goals and provide routine cost savings reports. Job Description: Be the tip of the spear in the sales organization • Create and close sales leads, • Grow current customer sales numbers, • Create new prospect customers, • Create technical and engineered solutions for customers, • Provide pumping solutions #LI-TS1 #ZRTS Duties and responsibilities: At Desk • 50+ outbound appointment setting calls a day when working from home, • Answering customer phone calls and technical questions, • Providing customer quotes and solutions, • Create and close sales leads In the Field • 15 real sales call meetings with customers per week, • Real time, real person, real reason, • Product demonstrations, • Solving customer problems, • Learning customer needs, • Educating on company capabilities, • Sales experience required, • Mechanical knowledge preferred, • Customer service, people skills and outbound personality, • Ambition and the ability to learn quickly, • Effective time management, organization, multi-tasking skills, • Strong verbal and written communication skills, • Pay: $65,000 Salary with competitive commission plan, • Spanish Speaking a Plus, • Sales Experience a Plus, • Pump Experience a Plus, • College Degree a Plus Location: USA:CA:Ontario DXP is always looking for individuals who want to join a team of employees who have the desire to achieve remarkable accomplishments together. The culture of the organization is supportive and goal oriented with high expectations, yet it is an environment where the team spirit inspires everyone to do their best. All DXP employees play a vital part in the organization and are treated with respect. By applying to DXP, you will have the opportunity to speak with some of the most respected professionals in the industry. DXP offers a comprehensive benefits package for full-time regular employees, normally working a minimum of 30 hours per week including: Medical, Dental, Vision, Flexible Spending, 401(k), paid holidays, Life and Disability Insurance, and additional supplemental products. All part-time and temporary employees are eligible for 401(k). Minimum Required Salary and benefits commensurate with experience. We are an equal opportunity employer. Except where prohibited by state law, all offers of employment are conditioned upon successfully passing a drug test. This employer uses E-Verify. EOE/M/F/D/V

Job Description Job Title: Sanitation Technician Location: Torrance, CA Shift: First Shift Pay Rate: $20.50 per hour Employment Type: Full-Time Purpose Statement: The Sanitation Technician is responsible for controlling all environmental and in-depth equipment cleaning to ensure the safety and quality of food products. Key Responsibilities: * Disassemble and set up production equipment; clean equipment using COP and CIP systems. * Verify proper cleaning and set-up of all equipment; store production and sanitation materials. * Operate material handling equipment; monitor and test chemical concentration for CIP systems. * Maintain CIP Chart Recorders, logs, and documentation. * Take inventory of sanitation supplies; use bioluminescence technology to verify CIP system effectiveness. * Perform tasks according to the Master Cleaning Schedule. * Troubleshoot sanitation equipment issues. * Train new associates on Environmental Operations. * Maintain a safe and orderly work area according to GMP and safety guidelines. * Operate SCADA system and complete related paperwork. * Perform miscellaneous duties as assigned by the Lead. * Cross-train in other plant areas as required (e.g., Valve and Pump PM program). Qualifications: * High school diploma or GED. * Minimum 1 year of food manufacturing/industrial experience. * Strong written and verbal communication skills. * Ability to train others in sanitation/environmental operations. * Ability to work as part of a self-directed team. * Awareness of and adherence to GMP, Food Safety, and Associate Safety guidelines. * Knowledge of proper machine operating and adjusting procedures. * Commitment to production improvement and team collaboration. Company DescriptionOur Professional Division works with clients as a stakeholder in their hiring strategy and process. We facilitate a solid match for our employees and clients, examining the experience and team dynamics required for a great match. Our professional team was handpicked from 25 years of recruiting and staffing experience to build our Professional team to be the best in the industry. We focus on professional placements in your Executive Placement, Accounting & Finance, Human Resources, and Administrative Support areas. We place candidates leveraging direct hire, contract-to-hire, contingent, and “Smart Hire” modalities.Our Professional Division works with clients as a stakeholder in their hiring strategy and process. We facilitate a solid match for our employees and clients, examining the experience and team dynamics required for a great match. Our professional team was handpicked from 25 years of recruiting and staffing experience to build our Professional team to be the best in the industry. We focus on professional placements in your Executive Placement, Accounting & Finance, Human Resources, and Administrative Support areas. We place candidates leveraging direct hire, contract-to-hire, contingent, and “Smart Hire” modalities.

EQUIPMENT Utilizes patient care equipment appropriately and safely according to manufacture guidelines IV pump Feeding pump PCA pump Epidural pump Sequential compression device Wound VAC Heating pad/pump. ORGANIZATION Manages time effectively. OBSERVES REGULATORY AGENCY REQUIREMENTS: National Patien

About USS: United Site Services is the industry leader in comprehensive site services, committed to creating partnerships that help enable our customers’ project and event success. Our deep industry expertise, excellence in process management, and dedication to corporate responsibility are pillars of our value proposition; each supported by tangible, best-practice programs. Our success is fueled by the dedication and collaboration of our diverse team, which includes field technicians, customer care representatives, sales professionals, and functional experts. Each member of our team plays a vital role in ensuring a seamless and reliable experience for our customers. By joining United Site Services, you will be part of an organization that values continuous improvement, teamwork, and excellence in every aspect of our business. Overview: The Service Technician operates a company service truck and drives to various locations to service/pump/clean portable restrooms and/or holding tanks. This position is the heart of our business. Responsibilities: • Perform basic service truck driving functions in accordance with USS and DOT requirements., • Perform all work duties in a safe manner in accordance with USS and DOT safety standards to ensure no accidents or injuries., • Perform duties by sitting, standing, stooping, kneeling, crouching or crawling. In addition, perform lifting/pushing between 50 and 150 lbs. on a frequent basis during work shift., • Conduct portable toilets servicing to USS 8 point service standard., • Perform customer service interaction when on customer work sites to ensure they are getting the services completed to their standard., • Ability to be flexible in order to meet customer needs when routes needs to be adjusted or changed., • Provide routing feedback to Operations Manager/Supervisor/Coordinator to be most efficient as well as giving the customer the best service possible., • Ability to strategically plan for customer needs by discussing their portable toilet needs, so the customer's current and future needs are satisfied. Qualifications:, • Minimum two years of commercial driving experience., • Valid Driver License (CDL or non-commercial)., • Excellent time management, customer service and communication skills., • Strong problem-solving and decision making skills. Physical Requirements:, • Sit while driving and stand while servicing products, • Use hands and fingers to handle, control or feel objects tools or controls, • Repeat the same movements, • See details of objects that are less than a few feet away and also at greater distance, • Speak clearly so customers can understand, • Understand the speech of another person, • Hear sounds and recognize the difference between them, • Walk up to 30 minutes at a time without exertion, • Enter and exit equipment by stepping and kneeling, • Lift up to 40lbs from your waist to your shoulders, • Lift 30lbs from the floor to your head, • Crouch and squat, • Holiday & Paid Time Off (pro-rated for Part-Time employees), • Medical/Pharmacy, • Dental, • Vision, • Employer-Paid Short-Term Disability, • Employer-Paid Employee Basic Life & Accidental Death and Dismemberment, • Voluntary Employee Life & Accidental Death and Dismemberment, • Voluntary Spousal Life, • Voluntary Dependent Life, • Hospital Indemnity, Accident and Critical Illness, • Commuter/Transit Account, • Healthcare Flexible Spending Account, • Dependent Care Flexible Spending Account, • Health Savings Account, • 401(k) with employer match, • Employer-Paid Employee Assistance Program (EAP)

Summary This position requires full-time onsite work. Oversight of all aspects of property maintenance and management of the maintenance team for a luxury multi-unit property. Support the property’s business goals and objectives by ensuring the functionality and condition of the premises are preserved. Perform multiple duties relating to facility systems, company processes, safety compliance, predictive and productive maintenance, new and existing resident upkeep, routine service calls, and external physical condition of the property. Oversee maintenance budget, including identifying and maintaining relationships with third party service vendors to achieve ideal response expectations that are cost-effective and within budget. Essential Duties and Responsibilities include the following but are not limited to: • Manage the maintenance team, including organizing weekly schedules, arrangement of unrestricted on-call hours, and prioritization of work assignments., • Ensure all work being done by the maintenance team is completed safely in compliance with all OSHA and Cal/OSHA regulations, company safety policies, and risk management procedures., • Ensure up to date MSDS are provided for all materials and chemicals used by the team., • Conduct regular performance evaluations for the team and make recommendations on rate increases, promotions and/or transfers. Correct performance issues on the team when needed, in coordination with HR., • Oversee personnel changes, including interviewing new job candidates and making recommendations to the General Manager on hiring and firing decisions., • Outline maintenance procedures and protocols for all onsite teams, establishing policies, procedures, and guidelines, including an emergency plan, to enhance operational efficiency and prepare for emergency and disaster response., • Conduct budget planning and resource allocation including assignment of individual maintenance budgets., • Maintain current knowledge of industry best practices and technologies and ensure the maintenance team is well-trained to provide the best services possible., • Establish a preventative maintenance program, outlining work, timeline, and cost parameters., • Prepare reports to review and address any service operations or budget issues., • Review repairs to verify completion and compliance with any specific property requirements dictated by insurance companies or government agencies., • Check in with residents on completion of work to ensure maintenance team is adequately completing all work requests to their satisfaction., • Monitor reviews and feedback on Reputation.com and correct any performance or quality issues identified with the team. Ensure survey results regularly exceed the Reputation.com national average., • Research and source multiple third-party vendors for capital projects and maintenance repairs to ensure quality upkeep of the property., • Inspect properties on a regular basis (including bi-annual unit inspections) to identify maintenance issues, safety hazards, property damage, and needed repairs., • Oversight of daily operation and maintenance of all working elements of the properties, such as:, • Carpentry: framing, drywall, texturing, plaster repairs, light roofing work, flooring/sub-floor repairs and/or millwork repairs., • Plumbing: minor re-pipes, shower valve replacement, individual water heater replacement, circulation pump replacement and/or reroute plumbing lines., • Electrical: replace receptacles/fixtures, replace breakers, troubleshooting for shorts/open neutrals, installation of recessed lighting, running dedicated circuits for smoke detectors and/or rerouting electrical lines., • HVAC: troubleshoot wall heaters, furnaces, condensing/package units, boilers, air conditioning units and Freon charges., • Maintenance and upkeep of common areas and amenities adhering to safety, health, and clean environment compliance., • Ensure the team responds to all service requests within 24 hours and completes work requests within 48 hours, maintaining appropriate ticket documentation., • Manage and execute all turnover preparation and ensure quality make-ready apartment homes for all new residents., • Coordinate and lead inspections for all potential new acquisitions., • Respond to after-hours service calls when needed., • Other onsite duties, as assigned. Competencies • Proven manager with team leadership skills., • Attention to detail with strong organization/project management skills., • Ability to juggle multiple tasks and identify priorities., • Intuitive problem solver who is customer responsive and able to work independently., • Develop a rapport with residents by being both knowledgeable and friendly to inspire trust within the property., • Proactive approach to address a multi-level audience consisting of internal and external relationships., • Reliable, dependable, and able to work independently., • Delivers results and has a strong sense of initiative and identifying best practices., • Proven communication and follow-up skills, both with residents and other team members. Qualifications • Minimum 3+ years of hands-on general maintenance experience., • High school diploma or equivalent, preferred., • Industry certifications or licenses, preferred., • Maintenance Technician certificate, building maintenance technology, or additional training in related field, a plus., • Familiar with all OSHA and related agency guidelines to ensure 100% compliance with all regulations., • Working knowledge of safety procedures and compliance., • Experience with third party property vendors, purchasing, and budget tracking., • Knowledge of building techniques, mechanical operations, groundskeeping, facility operations, carpentry, electrical, plumbing, and HVAC. Physical Requirements and Working Conditions • Works in an onsite, office environment. Regular onsite presence at assigned property required to manage daily property maintenance., • Works around moving mechanical parts and in outside conditions that include inclement weather, heat, and humidity. Noise levels may be loud at times., • Must be able to move heavy equipment and machinery and use abdominal and lower back muscles to provide support over time without fatigue., • Constant movement and use of limbs. Good manual dexterity, coordination, and stamina., • Frequently stands, walks, and interacts with onsite staff, residents, and vendors., • Frequently bends, stoops, kneels, and reaches., • Regularly lifts, carries, pushes, and pulls materials and objects between 25 lbs. – 40 lbs. pounds. Must be able to reach and lift overhead up to 50 lbs., • Regularly ascends/descends stairs, climbs ladders/roofs, and crawls in confined spaces., • Must be able to see, speak, read, write, and use a computer keyboard., • Must wear protective safety equipment and clothing as needed., • Must be able to enter common areas and residences to make critical/emergency service and repairs. Requirements • Must have reliable transportation., • Scheduling flexibility is required. May be assigned an irregular work schedule, including weekends, early mornings, evenings, and holidays. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. EQUAL OPPORTUNITY EMPLOYER Westhome is an equal opportunity employer to all, regardless of age, ancestry, color, disability, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (includes pregnancy, childbirth, breastfeeding, and related medical conditions), and sexual orientation.

I’m partnered with a market-leading water and wastewater contractor in Los Angeles that’s driving some of the region’s most complex and vital infrastructure projects. They are now seeking a Senior Project Manager to lead large-scale water treatment, wastewater, and pump station projects. This is an opportunity to take on a senior leadership role with a contractor recognized for delivering innovative solutions, maintaining strong client relationships, and providing outstanding career development and benefits to their teams. What You’ll Be Doing: • Leading the full project lifecycle on water/wastewater infrastructure projects, • Managing budgets, schedules, and project delivery strategies, • Building and maintaining relationships with clients, owners, and stakeholders, • Overseeing project engineers, superintendents, and field staff to ensure quality and safety, • Driving collaboration across all teams to achieve project goals What We’re Looking For: • Proven experience as a Project Manager or Senior Project Manager in water/wastewater construction, • Strong background in treatment plants, pump stations, or major pipeline projects, • Demonstrated ability to manage multi-million-dollar projects from start to finish, • Excellent leadership, communication, and client-facing skills, • Commitment to safety, quality, and delivering results Why This Opportunity? • Join one of Los Angeles’ most respected and fastest-growing water/wastewater contractors, • Lead high-profile projects that directly impact communities and infrastructure across the region, • Competitive compensation package, excellent benefits, and long-term career growth opportunities If you’re a proven leader ready to take the reins on landmark water/wastewater projects, this is a chance to grow your career with one of the industry’s best.

Come Join the Premier Infusion & Healthcare Family! At Premier we offer employees stability and opportunities for advancement. Our commitment to our core values of Compassion, Integrity, Respect and Excellence in People applies to our employees, our customers, and the communities we serve. This is a rewarding place to work! Premier Infusion and Healthcare Services is a preferred post-acute care partner for hospitals, physicians and families in Southern CA. Our rapidly growing home health and infusion services deliver high-quality, cost-effective care that empowers patients to manage their health at home. Customers choose Premier Infusion and Healthcare Services because we are united by a single, shared purpose: We are committed to bettering the quality of life for our patients. This is not only our stated mission but is what truly drives us each and every day. We believe that our greatest competitive advantage, our greatest asset are our employees, our Premier Family in and out of the office sets Premier apart. PREMIER BENEFITS - For FULL TIME Employees: ● Competitive Pay ● 401K Matching Plan - Up to 4% ● Quarterly Bonus Opportunities ● Medical, Dental & Vision Insurance ● Employer Paid Life Insurance ● Short Term / Long Term Disability Insurance ● Paid Vacation Time Off ● Paid Holidays ● Referral Incentives ● Employee Assistance Programs ● Employee Discounts ● Fun Company Events Description of Responsibilities The Pharmacist is responsible for regulatory pharmacy compliance, patient safety, clinical patient management and communication with patient, caregivers, and physicians. The Pharmacist coordinates and supervises in the delivery of pharmacy services to patients at home. This includes compounding, quality improvement, dispensing, drug information and clinical monitoring activities. Reporting Relationship General Manager Schedule Monday - Friday, 9:00am - 5:30pm Rotating weekends and on-call based out of Torrance Responsibilities Include the Following: 1. The Pharmacist receives physician orders (written and verbal), and evaluates the appropriateness of these orders for dosage, drug choice, potential drug interactions, route of administration and stability., 2. Ensure that pharmaceuticals are accurately compounded and dispensed in accordance with pharmacy protocols and physician orders., 3. Available to patients for drug counseling or for drug consulting and resolves concerns and complaints., 4. Orders appropriate laboratory test(s) to monitor the effectiveness of therapy and to minimize the potential of toxic levels of drug. Also notifies the physician of all abnormal laboratory test results, and will document this communication in the patient’s progress notes. The communication can be either or both by telephone or facsimile transmission (as long as the fax clearly identifies the abnormal results)., 5. Communicate with medical professionals with regard to patient status and response to medication, and when necessary to resolve patient issues., 6. Contacts the physician to discuss alternatives in cases where drug interactions or stability makes the orders inappropriate. Discuss alternatives in cases where the appropriateness of dosage, drug choice or route of administration will not, in the Pharmacist’s judgment, be in the patient’s best interest., 7. The Clinical Pharmacist works with the office staff to arrange delivery times, coordinate care, quantify delivery amounts and arrange for and set up the infusion pump (if applicable)., 8. Assume on-call responsibilities in accordance with pharmacy guidelines. Minimum Qualifications: 1. Organizational skills sufficient to maintain consistently accurate records., 2. Ability to evaluate options and to make efficient decisions., 3. Current knowledge of all applicable state and federal pharmacy laws, rules and regulations., 4. Computer skills that include proficiency with spreadsheets, word processing, and efficient use of the internet and e-mail., 5. CPR+ experience is a plus. • Ability to use good judgment and work with minimal direction., • Must have good organizational skills and be able to work across interdisciplinary boarders., • Must possess excellent oral and written communication skills, with the ability to express technical issues in “layman” terms. Education and/or Experience: • Must be a graduate of an accredited school of pharmacy. Doctor of Pharmacy degree is preferred., • Additional training in an accredited Pharmacy Residency program is of benefit., • A minimum of 3 years experience in a hospital or home health infusion service providing direct patient care is required., • Prior experience working with managed care environments is a benefit., • Member of a professional society is recommended (i.e., ASHP, ASPEN, APHA). Equal Employment Opportunity (EEO) It is the policy of Premier Infusion & Healthcare Services to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. In addition, Premier Infusion & Healthcare Services will provide reasonable accommodations for qualified individuals with disabilities. Job Type: Full-time Work Location: In person

Job DescriptionDescription: Absolute Airflow is a 5 star rated company with over 2,000 reviews! At Absolute Airflow and Plumbing, we pride ourselves on our commitment to excellence and customer satisfaction. DUTIES AND RESPONSIBILITIES: · Inspect, repair, modify and install HVAC equipment including refrigeration and air conditioning compressors, receivers, condensers, chillers, water cooling towers, forced air converter units, pumps, automatic and hand valves, expansion valves and capillary tubes. · Conduct regular preventive maintenance inspections of refrigeration units, isolated heating and ventilating units, including boilers, gas and electrically operated air conditioning equipment, and make necessary adjustments or repairs; service and repair evaporative coolers. · Repair or replace defective parts in units and equipment and their controls, including thermostats, automatic switches, fan controls, log switches, damper motors, louvers, relays, filters, controls, belts, compressors, heat exchangers, high limit controls, pressure controls, safety valves, and automatic gas valves. · Operate a variety of hand and power tools, welder torch, vacuum pump, test equipment utilized in the trade and a motor vehicle; maintain equipment in effective and safe working condition; maintain parts and tool inventory. · Repair and rebuild semi-hermetic reciprocating compressors and compressors for centrifugal refrigeration machines. · Perform skilled electrical maintenance work in the repair, installation and alteration of HVAC equipment, components, timers, motors and wiring systems as needed; connect motors to control panels. · Test and examine boiler operations, observing meter and pressure gauges; conduct boiler water quality test and treatment; adjust boiler burner combustion. · Lubricate and pack heating, ventilation, refrigeration, and air-conditioning motors, pumps, fans, and other equipment. · Install and calibrate systems; install copper tubing and repair pipes and tubing as necessary; test joints and insulate pipes of refrigeration and air conditioning systems; flush boilers, descale tubing; rebuild pressure and temperature safety valves and water pumps. · Install, rebuild, replace or repair fans, motors, thermostats, fuses, filters, bearings, valves, controls, gaskets and other equipment as necessary. · Maintain related records concerning time, labor and materials; maintain log of · tasks performed and write reports as required. · Perform other duties as assigned. · Maintain regular attendance. KNOWLEDGE OF: · Standard practices of the HVAC and refrigeration trade. · Theory of HVAC and refrigeration systems. · Materials, methods and tools used in the operation and repair of HVAC and · refrigeration systems. · Applicable building codes, ordinances and regulations of State and local · authorities pertaining to HVAC, refrigeration and boilers. · Air compressors and pneumatic controls. · Cooling tower and boiler water treatment. · Manual and electrical tools and equipment applicable to the HVAC and · refrigeration trade. · Welding and soldering techniques. · Health and safety regulations. · Basic record-keeping techniques. · Proper methods of storing equipment, materials and supplies. Requirements: ABILITY TO: · Perform skilled mechanical maintenance duties in the inspection, repair, · installation and alteration of District heating, ventilation, air conditioning and · refrigeration systems and related equipment and facilities. · Calibrate systems. · Perform preventive maintenance and routine servicing of equipment. · Diagnose defects, and install, repair and maintain heating, ventilating, refrigeration, · and air-conditioning units. · Follow oral and written instructions. · Operate specialized machinery, equipment and tools utilized in the repair, · installation and maintenance of heating, ventilation, air conditioning and · refrigeration systems. · Communicate effectively both orally and in writing. · Understand and follow oral and written directions. · Work cooperatively with others. · Work independently with little direction. · Meet schedules and time lines. · Maintain routine records and prepare reports. · Routinely lift objects weighing up to 75 pounds. · Lift heavy objects. PHYSICAL DEMANDS: · Work is performed while standing, sitting, and/or crouching for full shift. · Requires the ability to communicate effectively using speech, vision and hearing. · Requires the use of hands for simple grasping and fine manipulations. · Requires bending, squatting, crawling, climbing, reaching. · Requires the ability to lift, carry, push or pull medium weights, up to 75 pounds. · Requires the ability to go up and down ladders, stairs, emergency exits etc., multiple times a day. · Requires activities involving being around moving machinery, exposure to marked changes in temperature and humidity, and exposure to dust, fumes and gases.

Job Description Schedule: Monday- Friday 6:00AM- 2:45PM, possibility of overtime work. Position Summary The Maintenance Technician is responsible for maintaining, repairing, and installing industrial equipment and systems in a food processing facility. This includes both electrical and mechanical components. The technician ensures all production equipment is operating efficiently, performs preventive maintenance, troubleshoots issues, and completes necessary repairs with minimal supervision. Accurate documentation of work and adherence to safety protocols is required. Key Responsibilities * Troubleshoot, repair, and maintain production line and facility equipment * Perform routine preventive maintenance on all systems and machinery * Assist with equipment installation and production line setup * Support production operations by operating and maintaining key machinery * Diagnose mechanical and electrical issues and take corrective action * Replace motors, gearboxes, and other mechanical components * Perform basic mechanical rebuilds and equipment overhauls * Read and interpret electrical schematics and low-voltage safety circuits * Maintain a clean, safe work environment and follow all safety standards * Participate in the company’s emergency response team * Perform other maintenance tasks as assigned by management Qualifications & Experience * High school diploma or GED required * 4+ years of experience troubleshooting pneumatic and mechanical equipment * 2–3 years of electrical repair experience * Strong knowledge of centrifugal and positive displacement pump repairs * Experience with automated/high-speed packaging equipment preferred * Proficient in reading schematics and performing system diagnostics * Able to disassemble, repair, and reassemble complex production machinery

Job Description Neat opportunity for an experienced Pump Mechanic out of Los Angeles County near Long Beach. Our shop is in Signal Hill but we are seeking a local field service mechanic to assess issues with mechanical equipment and heavy pumps on-site (pumps are electric driven). These include storm pumps, water system pumps, fire pumps, sewage pumps and some HVAC equipment (air compressors, occasional gear boxes, and cooling towers). The service area is a 50-mile radius from Signal Hill and working at hospitals, high-rises, municipalities, museums, amusement parks and airports. Compensation: • $45.00-$50.00/hour. No benefits package provided., • Analyze, troubleshoot, remove, take apart, and spec components., • Alignments, rigging and testing., • Removal, repair, and installation., • Maintain basic electrical on pump controllers and motors., • Some plumbing system maintenance with valves and fittings., • Proven mechanical experience in refinery, power plant, marine industry or pump manufacturer., • Prior rigging experience., • Ability to read micrometers., • Basic electrical experience - single and two phase., • Clean background check and valid drivers license with driving record in good standing.Company DescriptionWe work with you to ensure the job fits what you are looking for. We will also help you build an awesome resume.We work with you to ensure the job fits what you are looking for. We will also help you build an awesome resume.

The Clinical Pharmacist works with the office staff to arrange delivery times, coordinate care, quantify delivery amounts and arrange for and set up the infusion pump (if applicable). The Pharmacist is responsible for regulatory pharmacy compliance, patient safety, clinical patient management and co

Government Jobs - Full-Time - $59,752.Annually Under general supervision, operates and maintains water wells, water storage tanks, various control valves, pressure reducing valves, vacuum valves, and related equipment and appurtenances; maintains operational and repair records; and performs other re

Petroleum Pump Operator Job Duties: Control pumping systems to circulate liquids through a refinery. Operate steam or electric-driven pumps to circulate crude, semi processed, and finished petroleum products, wate

Must have pipeline knowledge and experience and ability to execute a wide range of pipeline responsibilities including pump station management and crude oil shipping responsibilities. Get notified when a new job is posted. Your actual pay will be based on your skills and experience talk with your re