Safety jobs in Topeka, Kansas - Page 2Create job alerts

Job DescriptionCompany Flatbed OTR Truck Drivers - Average $1,300 - $1,800 Gross Per Week 6 Months CDL A Experience Required to Apply $4,000 Sign on Bonus for 6 months experience or more $1,000 Weekly Minimum pay for experienced driver General Description of Benefits Available the 1st of the month after 60 days of employment: • Weekly pay plus bonuses, • Health, Dental, Vision, Life & Disability Insurance, • 401(k) with Employer Match: $0.25 for every $1 up to 8%, • Flexible Spending Accounts: Medical & Dependent Care, • Paid Time Off: 1 week at 6 months, then annually, • Prescription Drug Coverage, • Condition Management & Virtual Care Access, • Accident, Critical Illness & Hospital Indemnity Plans, • Employee Assistance Program (EAP), • Pet Policy & Passenger Program, • Driver Referral Program, • Performance and Safety Bonuses (Monthly), • Average Weekly Gross: $1,000 – $1,700, • Average Weekly Miles: 2,100 – 2,400, • Home Time: Out 12–14 days, home 2 days on Weekend, • Primary Operating Area: Midwest and Southeast, • Freight: 100% No-Touch (Tarping & Securement Required), • Hauling: Lumber, wallboard, steel, coils, and other building products, • Drop & Hook: OccasionalEquipment Includes:, • 2022–2026 Peterbilt 579, Volvo, and Freightliner Cascadias, • Automatic transmission, • Governed at 65 mph (pedal) / 68 mph (cruise), • Fully equipped with:, • APU, • 1,800-watt inverter, • Refrigerator & Microwave, • Free Wi-Fi, • Smart TV with satellite programming, • CB Radio, Satellite Radio Hook-upsJob Requirements, • Class A CDL, • Clean MVR, • Pay Increase: $0.01 CPM annually until $0.70 CPM cap, • Monthly Performance Bonus: Up to $0.05 CPM, • Per Diem: $0.10 CPM included, • Tarp/Securement Pay, Stop Pay, Detention Pay, Breakdown, and Chicago Cross-Town Loads Pay, • Paid Weekly via Direct Deposit, • Scales, Tolls, and Lumper Fees Paid by Decker Home Time, • Out 12–14 days, home 2 daysOrientation & Onboarding:, • Location: Fort Dodge, IA, • Length: 3 Days, • Orientation Pay: $500 after completion, • Travel Options: Rental vehicle, plane ticket, or personal vehicle reimbursement, • Physical & Drug Screening Required Pay Range: 0.53-0.70 per_mile, General Benefits: Full Benefits at 60 days: • Weekly Paychecks; $100 Weekly Advance Allowance • Optional Health, Dental, Vision, Life, Short and Long Term Disability, Critical Illness and Accident Insurance • 401(k) with an Employer Match • Flexible Spending Accounts for both Medical and Dependent Care Expenses • One week of PTO at 6 months and then annually thereafter! Driver Referral Program Paid Orientation Performance Bonus paid Monthly Safety Bonus paid Monthly Pet Policy and Passenger Program 24/7 Dispatch and Maintenance Support

Job DescriptionCDL A Regional Truck Driver – Weekly Pay: $1,150–$2,170 We’re hiring experienced CDL A truck drivers for regional routes offering consistent miles, competitive pay, and modern equipment. If you're looking for a reliable truck driving job with great home time and strong benefits, this opportunity is for you. Top performers make $91,000 annually. Position Details • Average 2,200–2,500 miles per week, • 100% no-touch freight, • Refrigerated and frozen loads; occasional dry van, • Occasional drop and hookPay & Bonuses, • Weekly gross: $1,150–$2,170, • Pay increase at $0.01 cpm annually (up to $0.70 CPM), • Monthly performance bonus: up to $0.05 CPM, • Per diem: $0.10 CPM included, • Weekly direct deposit, • Orientation pay: $500 after completion, • All scales, tolls, and lumper fees paidTruck Equipment, • Late-model trucks (2022–2026 Peterbilt, Volvo, Freightliner), • Automatic transmission, • Governed at 65 mph pedal / 68 mph cruise, • Equipped with APU, inverter, fridge, microwave, Wi-Fi, smart TV, CB radio, and satellite radio hookupsBenefits (Start 1st of the month after 60 days), • Health, dental, vision, life, and disability insurance, • 401(k) with employer match (25¢ per $1 up to 8%), • Paid time off: 1 week at 6 months, then annually, • Flexible spending accounts (medical and dependent care), • Prescription drug coverage, • Virtual care and condition management, • Accident, critical illness, and hospital indemnity plans, • Employee assistance program, • Pet and passenger policies, • Driver referral program, • Monthly safety and performance bonuses, • 24/7 maintenance and dispatch supportOrientation, • Location: Fort Dodge, IA, • Duration: 3 days, • Travel options: rental car, plane ticket, or reimbursement for personal vehicle, • Physical and drug screening required Pay Range: 1150.00-2170.00 per_week, General Benefits: Equipment: 2020 and Newer Peterbilt 579 and Freightliner Cascadias - Automatic with: APU's, refrigerators, CB Radio, internet, 1,800-watt inverter, Smart TV with Satellite programing, Satellite Radio Hook-Ups. Full Benefits at 60 days: • Weekly Paychecks; $100 Weekly Advance Allowance • Optional Health, Dental, Vision, Life, Short and Long Term Disability, Critical Illness and Accident Insurance • 401(k) with an Employer Match • Flexible Spending Accounts for both Medical and Dependent Care Expenses • One week of PTO at 6 months and then annually thereafter! Driver Referral Program Paid Orientation Performance Bonus paid Monthly Safety Bonus paid Monthly Pet Policy and Passenger Program 24/7 Dispatch and Maintenance Support

Job Description CDL A OTR Flatbed Driver: $975.68 – $1,579.77 per week. Full Benefits AMERICA PROUD. FLATBED STRONG. DRIVE SYSTEM TRANSPORT! Looking for an exciting driving opportunity in the western region of America? System Transport is hiring experienced CDL-A flatbed truck drivers for regional and OTR routes. As a driver, you will be transporting important goods and materials such as glass, steel, aluminum, building materials, machinery, coils, and specialty metals. We offer competitive pay packages and excellent benefits. Join our team and become America Proud, Flatbed Strong with System Transport. Don't wait, apply now! OPPORTUNITY FOR CDL-A FLATBED TRUCK DRIVER • Driver Type: Experienced CDL-A Truck Drivers, • Equipment Type: Flatbed, • Route Type: OTR (Over-The-Road) Route, • Division: Division 200, • Terminal: Spokane, WA Full pay package also includes other accessorial compensation to include tarp pay, stop pay, detention pay, border crossing pay, safety bonuses, and over-dimensional pay as appropriate. Including both mileage pay and all other accessorial pay, full-time drivers on this fleet can make $975.68 - $1,579.77 per week ($50,735.11 - $82,147.90 per year) depending on experience, routes, regular attendance and length of service. Flatbed OTR Driver Rate: $0.55 - $0.60 per mile, depending on experience. Changing jobs is never easy - that’s why our transition package invests in you. We offer a $1,800 Transition Package; $1000 of which is allotted for orientation for your first 2 weeks so you can focus on driving while we take care of the rest. Call 1-866-979-7360 for more information about our pay package. HOME TIME: • Home Time: 3 weeks out, then 3 days off, • Home time varies by division. This opportunity is for Division 200., • System Transport offers many different route options for truck drivers. EXCELLENT BENEFITS:Benefits are available to enroll in after the eligibility waiting period has been met. • Health Insurance, • Dental Insurance, • Vision Insurance, • Health savings account, • 401(k), • 401(k) matching, • Life insurance, • Employee assistance program, • Transition Pay, • Orientation Pay, • Accrue 1 hour of sick time per 30 hours worked, then 1-9 years 80 hours PTO, 10+ years 120 hours PTO. HOW TO GET HIRED! HIRING QUALIFICATIONS: • Required: Must have a valid Class A CDL, • Required: Must be 21 years of age or older, • Required: A safe driving record on the road is required., • Required: No more than 6 jobs in the last 3 years, • Required: 4+ months of driving experience required, • Preferred: 1 year truck driving experience, but not necessary, • Required: Background Check required, • Required: Clean Drug Test required, • Required: Clean Clearinghouse result required, • Required: For all flatbed driver opportunities, the driver must be physically able to lift a 90-pound tarp onto a 5-foot high platform twice. System Transport will test this during orientation, and flatbed drivers tarp about 70% of our loads. (this is required) AMERICA PROUD, FLATBED STRONG. COME DRIVE WITH SYSTEM TRANSPORT!CLICK HERE TO APPLYFill out our short-form application - takes 2 minutes to complete! CALL TODAY! 1-866-979-7360Speak with a System Transport Recruiter, and let us help you find the flatbed route that fits you best!APPLICATION DEADLINE 11/30/2025 WHO IS SYSTEM TRANSPORT? If you are looking for big company resources with a small company feel, you have found the right place to call home. Drive for System Transport, and receive great pay packages and excellent benefits like; transition and orientation pay, vacation time, good home time, medical and dental, 401K, and so much more. System Transport has been hauling what builds America since 1972! Today, we are still keeping the country running with great drivers like you behind the wheel. America Proud, Flatbed Strong. Come drive with us! OUR COMMITMENT TO YOUR SAFETY: Your safety is always paramount to us. When you drive for System Transport, you will drive the newest flatbed trucks equipped with cutting edge technologies for your comfort and safety. • OUR MODERN TRUCKS ARE METICULOUSLY MAINTAINED FOR YOUR SAFETY, • Every tractor has a lane departure & forward collision warning system, hard brake monitoring, and a satellite communication device installed., • 24/7/365 road service staff & shops, • If a truck needs repairs, it's not going out until it is 100% ready to hit the road again safely with you at the wheel. You can count on that!, • DRIVER PORTAL: SUPPORT 24/7, • Award-winning app made for drivers by drivers., • Receive real-time updates and alerts, access your pay, current trip data, messages/notifications, available PTO, contact information, and so much more! AMERICA PROUD, FLATBED STRONG. COME DRIVE WITH SYSTEM TRANSPORT!CLICK HERE TO APPLYFill out our short-form application - takes 2 minutes to complete! CALL TODAY! 1-866-979-7360Speak with a System Transport Recruiter, and let us help you find the flatbed route that fits you best!

Job DescriptionCDL A Regional Truck Driver – Weekly Pay: $1,150–$2,170 We’re hiring experienced CDL A truck drivers for regional routes offering consistent miles, competitive pay, and modern equipment. If you're looking for a reliable truck driving job with great home time and strong benefits, this opportunity is for you. Top performers make $91,000 annually. Position Details • Average 2,200–2,500 miles per week, • 100% no-touch freight, • Refrigerated and frozen loads; occasional dry van, • Occasional drop and hookPay & Bonuses, • Weekly gross: $1,150–$2,170, • Pay increase at $0.01 cpm annually (up to $0.70 CPM), • Monthly performance bonus: up to $0.05 CPM, • Per diem: $0.10 CPM included, • Weekly direct deposit, • Orientation pay: $500 after completion, • All scales, tolls, and lumper fees paidTruck Equipment, • Late-model trucks (2022–2026 Peterbilt, Volvo, Freightliner), • Automatic transmission, • Governed at 65 mph pedal / 68 mph cruise, • Equipped with APU, inverter, fridge, microwave, Wi-Fi, smart TV, CB radio, and satellite radio hookupsBenefits (Start 1st of the month after 60 days), • Health, dental, vision, life, and disability insurance, • 401(k) with employer match (25¢ per $1 up to 8%), • Paid time off: 1 week at 6 months, then annually, • Flexible spending accounts (medical and dependent care), • Prescription drug coverage, • Virtual care and condition management, • Accident, critical illness, and hospital indemnity plans, • Employee assistance program, • Pet and passenger policies, • Driver referral program, • Monthly safety and performance bonuses, • 24/7 maintenance and dispatch supportOrientation, • Location: Fort Dodge, IA, • Duration: 3 days, • Travel options: rental car, plane ticket, or reimbursement for personal vehicle, • Physical and drug screening required Pay Range: 1150.00-2170.00 per_week, General Benefits: Equipment: 2020 and Newer Peterbilt 579 and Freightliner Cascadias - Automatic with: APU's, refrigerators, CB Radio, internet, 1,800-watt inverter, Smart TV with Satellite programing, Satellite Radio Hook-Ups. Full Benefits at 60 days: • Weekly Paychecks; $100 Weekly Advance Allowance • Optional Health, Dental, Vision, Life, Short and Long Term Disability, Critical Illness and Accident Insurance • 401(k) with an Employer Match • Flexible Spending Accounts for both Medical and Dependent Care Expenses • One week of PTO at 6 months and then annually thereafter! Driver Referral Program Paid Orientation Performance Bonus paid Monthly Safety Bonus paid Monthly Pet Policy and Passenger Program 24/7 Dispatch and Maintenance Support

Job Description Seeking a Fulltime Physical Therapist in Topeka, KS and surrounding areas. Our therapy team brings restoration to the day to day lives of our clients and delivers personalized care with dedication and compassion. Availability: Fulltime Pay Range: $90,000 - $120,000 Sign On Bonus: $5,000 Benefits • Multiple Major Medical Plans to Choose From (Medical, Dental & Vision)., • Flexibility, competitive pay, paid mileage., • Life Insurance (Basic, Voluntary & AD&D)., • Short Term Disability., • Orientation and training tailored to your needs as a new hire., • Provides PT assigned services to patients in the home setting in accordance with Physician plan of care and under the supervision of a licensed PT., • Participates in communication and case conference activities to promote maximum continuity and quality of patient care services., • Exhibits sound judgement and technical skills necessary to perform assigned treatment and procedure according to established agency protocols., • Maintains compliance with the Agency Code of Ethics., • Demonstrates ongoing compliance with agency standards, policies, procedures, state and Federal regulations, state practice acts for licenses personnel, payer requirements., • Practices safety, environmental, and/or infection control measures., • Active license in the state of Kansas required., • Home Health experience preferred, not required., • Competitive pay. Choose Phoenix, Apply today! Our mission is to offer New Beginnings and meaningful opportunities to our caregivers and clinicians while providing home care services to our clients built on innovation, skill, and Christ-like values of compassion, honesty, and patience. At Phoenix Home Care and Hospice, we are committed to fostering a culture of equity, diversity, and inclusion in everything we do. We believe that everyone, regardless of their background or identity, deserves respect, equal opportunities, and compassionate care. Our commitment to equity and inclusion is rooted in our core values of innovation, compassion, and patience.

Job DescriptionCompany Description At ARC Physical Therapy+, our mission is simple: be a catalyst of change in the marketplace. Through excellence in care, ARC Physical Therapy+ is committed to helping patients recover quickly and get back to what they love to do. With industry-leading physical, occupational, and hand therapy clinics in Kansas, Missouri, and Arkansas we are here to serve our communities and have been doing so for the past 20 years. Job Description We are seeking a passionate and dedicated Occupational Therapist to join our team at ARC Physical Therapy +. As a key member of our organization, you will play a crucial role in delivering high-quality care to our patients, ensuring their recovery and well-being. • Conduct comprehensive assessments of patients to develop personalized treatment plans tailored to their specific needs and goals within the scope of occupational therapy practice., • Evaluate physician referrals and thoroughly review patients' medical records to determine appropriate occupational therapy interventions based on the patient's condition, functional abilities, and treatment objectives., • Deliver direct patient care using evidence-based interventions and established occupational therapy protocols, ensuring optimal therapeutic outcomes and patient safety., • Document assessment findings, treatment progress, and instructions provided to patients and their caregivers accurately and comprehensively in accordance with professional standards and regulatory requirements., • Develop written plans of care and establish measurable goals based on the initial evaluation findings, collaborating closely with patients and their interdisciplinary care team to ensure a holistic approach to rehabilitation., • Implement individualized occupational therapy treatment programs, incorporating therapeutic activities, adaptive equipment, and environmental modifications to enhance patients' functional independence and quality of life., • Maintain effective communication with patients, caregivers, and interdisciplinary team members, including physicians and insurance providers, to coordinate care, address concerns, and optimize treatment outcomes., • Ensure timely completion of documentation, including progress notes, treatment summaries, discharge plans, and incident reports, to support continuity of care and facilitate reimbursement for services rendered.Qualifications, • Graduate degree from CAPTE-accredited Occupational Therapy program. New graduates are encouraged to apply, we’d love for you to start your career with us!, • Current state of Kansas license and CPR certification, • Ability to work efficiently/effectively in an autonomous environment, • Basic PC skills and knowledge, including but not limited to Electronic Medical Record (EMR) system, database software, and MS Office, Additional Information • Competitive pay range, • Monday - Friday schedule (8:00 AM- 5:00PM), • Incentive plan for clinicians who consistently see a higher number of patients per day, • In addition to productivity bonuses, clinical may be eligible for additional bonuses, • A unique opportunity to provide exceptional care to a lower-volume patient base, • A generous yearly Continuing Education Allowance, Access to MedBridge, and ARC University, • Employee Assistance Program (EAP), • Employee discount plans, • Gain access to ARC IGNITE: A Mentorship Program offering clinical guidance for professional growth, specialization, and development., • Student Program, appealing to individuals seeking opportunities to contribute to their career field, • Benefits package including 401k, health, dental, and vision, • Generous paid time off package

Job DescriptionSalary: $18-$33 per hour Primary Accountabilities: A trailer technician is responsible for maintaining, repairing, and servicing trailers to ensure they are in safe and proper working condition that aligns with Hoyts Service Standards. The trailer technician is responsible for 3 key areas with duties pertaining to each. Major Duties: * Inspection & Diagnostics • Perform routine inspections on trailers to identify issues and potential problems., • Diagnose mechanical, electrical, and structural problems using skills, tools, and diagnostic equipment. Repair & Maintenance • Repair or replace defective parts such as brakes, lights, wiring, and suspension systems., • Conduct regular maintenance tasks such as lubrication and tire rotations., • Troubleshoot and repair electrical systems and wiring, • Install and maintain lighting systems, including brake lights, turn signals, and interior lights, • Inspect, repair, and maintain brake systems, including air brakes and hydraulic brakes, • Service and repair suspension systems, including leaf springs, shock absorbers, and axles., • Inspect and repair hydraulic systems such as lift gates and hydraulic ramps. Administration • Maintain detailed records of all trailer inspections, repairs, and maintenance., • Conduct safety checks and ensure trailers meet all legal and regulatory requirements., • Maintain a clean and safe work environment, ensuring proper use of tooling and equipment., • Follow all safety procedures and guidelines and stay up to date on all safety training., • Work closely with all shop staff to ensure timely and efficient completion of all shop work., • Complete all ongoing training and development as required.

Job Description Who is Tech Electronics? We provide systems and services that help our customers work smarter, feel safer, and collaborate more effectively. Tech Electronics is a technology services organization headquartered in St. Louis, Missouri with seven offices across the Midwest. At Tech Electronics, we specialize in low voltage life safety and communication systems in the education, healthcare, construction, government, commercial-industrial, SMB, and worship industries. From fire alarm installation and testing to security cameras and video surveillance, our tailor-made solutions deliver connection and protection. Why Tech Electronics? At Tech Electronics, we pride ourselves on bringing a unique family atmosphere to an ever-evolving technology marketplace. We recognize that our people made us special when we opened our doors nearly 60 years ago, and they continue to do so today. We prioritize giving motivated individuals opportunities to find their gifts, develop their talents, and live their lives to the fullest. If you're looking for a job that's more than just a job, our Tech family is waiting for you! What's in it for you • EXCELLENT WAGES, • Health, Vision & Dental Insurance on DAY ONE, • Paid Time Off & Accrued Personal Time, • Tuition Reimbursement, • Long term & Short-term disability, • Generous Holiday Schedule, • Hybrid office schedule (select positions), • Immense Growth Opportunities, • Relaxed Family Culture, • Teladoc, SurgeryPlus, & other medical benefits What you'll do as a Fire/Security Technician • Oversees & assists with all cable, device, & head-end installations, • Performs programming of systems at project site checkout & testing of the installed systems, • May perform installation of fire, access control, video surveillance, intrusion detection, infant abduction and wandering patient systems at customer or project sites, • Provides customer service to end user or electrical contractor of assigned job What is need or preferred as a Fire/Security Technician • Minimum of one year of systems service experience, • Customer service & strong communication skills, • Lenel or NICET certifications preferred, • Technical/ hands on skills preferred, • Valid Driver's License - Class C, • Weekend standby rotation required We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. We are a drug free workplace. Employment is contingent on passing a drug test.

Job Description Who is Tech Electronics? We provide systems and services that help our customers work smarter, feel safer, and collaborate more effectively. Tech Electronics is a technology services organization headquartered in St. Louis, Missouri with seven offices across the Midwest. At Tech Electronics, we specialize in low voltage life safety and communication systems in the education, healthcare, construction, government, commercial-industrial, SMB, and worship industries. From fire alarm installation and testing to security cameras and video surveillance, our tailor-made solutions deliver connection and protection. Why Tech Electronics? At Tech Electronics, we pride ourselves on bringing a unique family atmosphere to an ever-evolving technology marketplace. We recognize that our people made us special when we opened our doors nearly 60 years ago, and they continue to do so today. We prioritize giving motivated individuals opportunities to find their gifts, develop their talents, and live their lives to the fullest. If you're looking for a job that's more than just a job, our Tech family is waiting for you! What's in it for you? • Health, Vision & Dental Insurance on DAY ONE, • Company credit card, cellphone, laptop (as needed), • Paid Time Off & Accrued Personal Time, • Tuition Reimbursement, • Long term & Short-term disability, • Generous Holiday Schedule, • Hybrid office schedule (select positions), • Immense Growth Opportunities, • Relaxed Family Culture, • Teladoc, SurgeryPlus, & other medical benefits What you'll do as a Systems Engineer/Designer • Applies theories and principles of system design and to support the sales, installation, and service of Tech Electronics' systems, • Ensures system design and technical support complies with applicable codes, specifications, and/or customer needs, • Understands the strategy and objectives of each Strategic Business Unit, • Handles various aspects of designing/engineering work including small or basic system installations or moves, adds and changes, • Understands and responds to customer requests, both verbal and written., • Directly communicates with customers in the form of quotations, meetings, presentations, drawings and/or technical support to understand and define their needs., • Works directly with other designers/engineers and employees to produce drawings from sketches, existing drawings, and electronic images as well as work from customer drawings, company drawings and/or specifications., • Works closely with all departments to ensure that the drawings convey the correct information and are error-free., • Associate degree in a field of electronics, electrical or computer engineering or related engineering field or equivalent work experience., • One year experience in a designer/engineer capacity., • Understanding of CAD and drafting techniques, • Knowledge of design techniques, principals, and tools involved in the production and use of technical plans, blueprints, drawings, specifications, and models., • In-depth knowledge of computer, local area network, and wide area network technologies. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. We are a drug free workplace. Employment is contingent on passing a drug test.

Job Description Hayden Tower Service, Inc. is a communications construction company that provides turn-key wireless site installations. Whether new site, colocations or rooftop sites, we take pride in the fact that we self-perform the majority of all aspects of the construction process. Our Tower Construction Crew members install tower foundations, equipment shelter foundations, access roads and compound areas at tower and communication sites throughout the Midwestern states. Job Description: • Travel, out of town, for up to two weeks at a time., • Responsible for excavating footings, tower foundations, tower anchors, grounding trenches and power and telephone trenches., • Installs ground rods and ground rings and is responsible for insuring all Thermo Welded joints are acceptable., • Glues all conduits together in accordance with the site drawings and the site supervisor’s instruction., • Tie rebar, pour required concrete and is responsible for finishing and rubbing foundations and slabs., • Backfills and packs all excavations to prevent settling., • Drives company vehicles to the construction site and uses these vehicles to deliver material to other construction sites within the Continental United States., • Concrete testing including slump and compression strength tests, • Operation of skid-steers, backhoes, excavators, compacting equipment, • Maintain a good driving record, • Must be able to obtain a CDL within 90 days of employment, • Receive and follow direction of crew chief, • Assist in ensuring trucks and equipment are well maintained and organized, • Participate in daily safety meetings Required Skills: • The applicant must possess a HS diploma or equivalent, • Desire to learn how to operate heavy equipment, • Possess a valid driver’s license, • Class B or Class A CDL (highly desired), • Must be able to lift up to 80 lbs., • Ability to pass a DOT physical and drug screen., • Construction or equipment operator’s background (preferred) Competitive hourly rate that increases based on performance and obtaining certifications. Per diem. Benefits: We offer Medical / Dental insurance, Retirement Plan and Paid Time Off. Powered by JazzHR rl8x4TOWL9

Job Description Job Overview: D7 Pneumatics LLC is seeking highly skilled and experienced Millwrights with strong welding capabilities and steel mill experience to join our maintenance division. This role will involve maintaining, repairing, and installing industrial machinery across a variety of sectors, including steel mills, cold mills, sawmills, and powerhouses. The ideal candidate will have a solid background in mechanical systems, a strong understanding of welding techniques, and the ability to work in a fast-paced, safety-focused environment. Key Responsibilities: • Maintenance & Repairs: Troubleshoot, repair, and maintain mechanical equipment, conveyor systems, crushers, pumps, motors, gearboxes, and other industrial machinery in coal mining operations, sawmills, and auto plants., • Welding & Fabrication: Perform welding (MIG, TIG, Stick) for repairs and fabrication of parts, structures, and equipment as needed. Conduct welding inspections to ensure high-quality, safe work., • Preventative Maintenance: Develop and implement preventative maintenance schedules to reduce downtime and extend the lifespan of machinery and equipment., • Installation & Commissioning: Assist with the installation, alignment, and commissioning of new equipment in mining, sawmill, and automotive production lines., • Safety & Compliance: Follow all safety protocols and work in compliance with regulatory requirements, ensuring that work areas are always safe and clean., • Collaboration: Work closely with other maintenance technicians, engineers, and management to ensure efficient operations and quick resolution of mechanical issues., • Completion of a Millwright apprenticeship or equivalent experience., • Previous experience in industrial maintenance, preferably in coal mining, sawmill, and/or automotive plant environments., • Strong welding experience, particularly in MIG, TIG, and Stick welding, with the ability to work with a variety of materials (steel, stainless steel, etc.)., • Deep understanding of mechanical systems, hydraulics, pneumatics, and basic electrical systems., • Valid driver’s license, Millwright Certification, or equivalent trade qualification required., • Ability to work in physically demanding environments, including confined spaces, high elevations, and extreme temperatures. Must be capable of lifting heavy parts and materials as needed., • Strong troubleshooting abilities with attention to detail and precision., • Must adhere to all safety protocols and always demonstrate a commitment to a safe working environment. Preferred Qualifications: • Experience working in steel mills, sawmills, or automotive manufacturing settings., • Familiarity with automation and robotic systems., • Ability to read and interpret blueprints, technical manuals, and electrical schematics., • Experience in the installation and commissioning of heavy machinery.

Job Description Who is Tech Electronics? We provide systems and services that help our customers work smarter, feel safer, and collaborate more effectively. Tech Electronics is a technology services organization headquartered in St. Louis, Missouri with seven offices across the Midwest. At Tech Electronics, we specialize in low voltage life safety and communication systems in the education, healthcare, construction, government, commercial-industrial, SMB, and worship industries. From fire alarm installation and testing to security cameras and video surveillance, our tailor-made solutions deliver connection and protection. Why Tech Electronics? At Tech Electronics, we pride ourselves on bringing a unique family atmosphere to an ever-evolving technology marketplace. We recognize that our people made us special when we opened our doors nearly 60 years ago, and they continue to do so today. We prioritize giving motivated individuals opportunities to find their gifts, develop their talents, and live their lives to the fullest. If you're looking for a job that's more than just a job, our Tech family is waiting for you! What's in it for you • EXCELLENT WAGES, • Health, Vision & Dental Insurance on DAY ONE, • Paid Time Off & Accrued Personal Time, • Tuition Reimbursement, • Long term & Short-term disability, • Generous Holiday Schedule, • Hybrid office schedule (select positions), • Immense Growth Opportunities, • Relaxed Family Culture, • Teladoc, SurgeryPlus, & other medical benefits What you'll do as an Inspector • Assists Tech Electronics Technicians with maintenance, installation, or repairs, • Inspects various fire alarm panels and devices for proper functionality & makes necessary minor repairs to fire alarm systems, • Maintains stock of spare parts to effectively support the position, • Adheres to the inspection and safety standards developed and defined by the Company, • Maintains a detailed understanding of all local and national codes applicable to Tech Electronics' fire alarm systems and ensures systems adhere to applicable codes, • Responsible for suggesting methods to improve operations, processes, efficiency, and service to both internal and external customers What you need as an Inspector • Some Technical and/or Electronic work experience or education (highly preferred), • High school diploma, • Reliable transportation, • Class C driver's license We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. We are a drug free workplace. Employment is contingent on passing a drug test. Must be able to pass a drug and background screen.

Job DescriptionDescription: Job Title: Lead HVAC Technician Location: Topeka, Kansas Start Date: July 15, 2025 Employment Type: Contract-to-Hire Schedule: Monday to Friday, 6:00 AM – 3:00 PM Compensation: Competitive hourly rate, commensurate with experience Benefits: Company-provided PPE, service vehicle, and mobile phone along with Medical, Dental, and Vision Insurance Position Overview We are seeking an experienced and motivated Lead HVAC Technician to oversee and execute the installation, maintenance, and repair of heating, ventilation, and air conditioning systems. This role requires a hands-on leader capable of managing projects, ensuring compliance with safety standards, and delivering high-quality service to our clients. Key Responsibilities • Supervision & Leadership: Lead a team of HVAC technicians, assigning tasks, providing guidance, and ensuring timely project completion., • System Installation & Maintenance: Oversee the installation, inspection, and maintenance of HVAC systems, ensuring optimal performance and compliance with industry standards., • Diagnostics & Repair: Troubleshoot and resolve complex HVAC system issues, implementing effective solutions promptly., • Safety Compliance: Ensure all work adheres to OSHA and EPA regulations, maintaining a safe work environment., • Client Interaction: Communicate effectively with clients, addressing concerns, and providing updates on project progress., • Inventory Management: Maintain accurate records of materials, tools, and equipment, ensuring availability for ongoing projects., • Experience: Minimum of 5 years in HVAC installation, maintenance, and repair, with at least 2 years in a supervisory role., • Certification: EPA Section 608 Certification required., • Licensing: Valid driver's license with a clean driving record., • Technical Skills: Proficient in reading blueprints, schematics, and technical manuals; adept with HVAC diagnostic tools and equipment., • Physical Requirements: Ability to lift up to 50 lbs, work in confined spaces, and perform tasks requiring physical exertion., • Soft Skills: Strong leadership, communication, and problem-solving abilities; commitment to customer satisfaction.Requirements:

Job Description Location: Washburn University • We are hiring immediately for full time SOUS CHEF positions., • Address: Washburn University - 1700 South West College Avenue, Topeka, KS 66621. Note: online applications accepted only., • Schedule: Full time schedule. Days and hours may vary. More details upon interview., • Requirement: 2 years of previous sous chef or catering experience is preferred., • Perks: Free shift meals and uniforms!, • Pay Range: $20.00 per hour to $24.00 per hour. We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1476509. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Application Deadline: applications are accepted ongoing until all openings are filled for this position. If an applicant is declined due to the position being filled, they may still be considered for future opportunities and are always welcome to reapply. Join our campus team where you are valued and empowered to make a difference. Enjoy competitive wages, benefits, and perks like Instapay through the One @Work app. Our careers are filled with purpose and encourage learning, growth, and meaningful impact. Apply today! Job Summary Summary: Helps Executive Chef prepare and cook foods. Coordinates activities of cooks and other food-service associates. Assumes responsibility for kitchen and food-service associates in the absence of Executive Chef. Essential Duties and Responsibilities: • Cooks and prepares food following approved recipes and production standards. Ensures all deadlines are met based on production orders., • Supervises hourly food service associates. Includes interviewing, scheduling, payroll, training, counseling, participating in reviews and recommending disciplinary action, as appropriate., • Stores food in designated areas following all corporate, state and federal food safety and sanitation procedures., • Ensures proper food handling, presentation, portion control and maintenance of appropriate serving temperatures., • Maintains sanitation of equipment, supplies and utensils. Cleans workstation thoroughly before leaving area. Keeps display equipment clean and free of debris during meal service to comply with all sanitation, safety, production and merchandising requirements., • Interacts with customers to resolve complaints in a friendly, service-oriented manner. Relays relevant information directly to supervisor., • Demonstrates complete understanding of daily menu items and accurately explains them to associates and customers., • Keeps up with peak production and service hours., • Monitors inventory and deliveries of product and supplies. Tracks product production, consumption and waste. Informs supervisor when supplies or product are low. We are always looking for ways to invest in our people both inside and outside of work to help them achieve their full potential. Both full-time and part-time associates are eligible for the following benefits: • Opportunities for Training and Development, • Retirement Plan, • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program In addition, full-time positions also offer the following benefits to associates: • Medical, • Dental, • Vision, • Life Insurance/AD, • Disability Insurance, • Commuter Benefits, • Employee Assistance Program Because this position requires you to perform services in an educational facility, there may be periods when the Company does not require you to perform work (such as winter and summer breaks when food service needs decline or cease). Any such periods during which you do not perform work on the Company’s behalf may be unpaid and deemed a temporary layoff. However, depending on business needs, you may be required to work year-round, potentially at a different location during break periods. Business needs may vary from year to year. Our Commitment to Diversity and Inclusion Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Chartwells Higher Ed maintains a drug-free workplace.

Job Description TILE FINISHER Fox Ceramic Tile has an immediate full-time opening for an tile setter. Experience is NOT necessary. Our work requires a minimum of 50 degrees for the products we use. Therefore if you are currently working in the elements and want to get out of the rain, mud, cold and heat, you should take a serious look at this position. Qualifications & Requirements: • Minimum 3 years of proven experience as a professional tile setter., • Strong knowledge of different tile materials (ceramic, porcelain, marble, granite, etc.)., • Proficiency with tile-cutting tools and installation techniques., • Excellent attention to detail and craftsmanship., • Physical stamina and ability to lift heavy materials., • Strong commitment to safety and quality standards., • Valid driver’s license and reliable transportation preferred. Requirements: • Ability to travel for project out of town. Example would be to travel to Wichita for the week. Home on the weekends. Transportation provided and expenses reimbursed, ie company pays expenses., • Additional pay advancements is possible depending on skills and ablity to handle additional responsibilities.

Job Description • We are hiring immediately for a full time CHEF position., • Location: Advisors Excel - 4123 South West Gage Center Drive, Topeka, KS 66604. Note: online applications accepted only., • Schedule: Full time schedule. Monday through Friday, 5:30 am to 2:00 pm. More details upon interview., • Pay Range: $23.00 per hour to $25.00 per hour We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1477131. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Application Deadline: applications are accepted ongoing until all openings are filled for this position. If an applicant is declined due to the position being filled, they may still be considered for future opportunities and are always welcome to reapply. Diversity of thought and inclusion for all is what drives our success - we invite you to start your journey with us today! Eurest is recognized worldwide for standards of service and excellence within the foodservice industry. Embracing an ownership mindset, Eurest leverages global resources, promotes a local presence and enriches the communities we serve. The Eurest Promise, “connect with people, inspire through food, create solutions, and live our promise,” is exemplified throughout our organization. Eurest is proud to serve the world’s most respected successful corporations, including many of the Fortune 500. Job Summary Summary: Directs, coordinates and evaluates assigned kitchen, food production and food-service associates. Essential Duties and Responsibilities: • Supervises, coordinates and participates in activities of cooks and other associates engaged in preparing, cooking and serving food. Ensures all food handling, sanitation and customer service standards are met., • Supervises hourly kitchen associates, including interviewing, scheduling, payroll, training, counseling, participating in reviews and recommending disciplinary action., • Efficiently prepares high-quality food items according to standardized recipes to meet production, delivery and service schedules. Serves meals or prepares for delivery., • Ensures proper presentation, food quality, portion control and maintenance of proper serving temperatures., • Tracks food use, waste and consumption to requisition or purchase product., • Receives and inspects product and supplies for quality and quantity to ensure appropriate inventory., • Maintains sanitation of equipment, supplies and utensils. Cleans workstation thoroughly before leaving area. Keeps display equipment clean and free of debris during meal service to ensure compliance with sanitation, safety, production and merchandising requirements., • Helps select and develop recipes and menus. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Eurest maintains a drug-free workplace. Req ID: 1477131 [[req_classification]]

Job Description Title: Campus Custodial Supervisor Reports To: Campus Principal or designated Principal(s) / Associate Principal(s) Supervises: Custodians who are assigned to a campus. Position Purpose: To provide through others the upkeep, maintenance, cleanliness, safety and security of the assigned building so a safe, clean environment will be available for teaching and learning. Qualifications: • Ability to train, motivate and work effectively with those receiving supervision and school personnel., • Demonstrates oral and written communication skills., • Possess communications and team building skills., • Ability to follow and give instructions., • Understanding of custodial duties., • Knowledge of occupational hazards, safety precautions, hazardous materials and proper ways to perform the assigned duty., • Ability to work independently according to prescribed standards and procedures. Physical/Emotional Requirements: (The incumbent may be required to use the below requirements during any part of the working day.) Reading, writing, speaking, hearing, manual dexterity, bending/stooping, walking, reaching, pushing/pulling, climbing, kneeling. • This position is rated as a Level 4 position. The incumbent must be able to score a 4 or higher on the physical capacity test,, • The incumbent in these situations must be able lift/carry 20 to 50 pounds occasionally, 10 to 25 pounds frequently, and up to 10 pounds continuously., • The physical requirement revision was requested and approved by the worker compensation committee on 11-17-2015., • Failure to comply with the physical limits established by the physical capacity test will result in disciplinary action for unsafe practice. Performance Responsibilities: • Schedule and assign responsibilities for building housekeeping duties., • Coordinate with principal or designee all special events., • Inspect areas in and around campus to ensure quality of custodial service., • Plan and schedule summer clean-up., • Oversee the care and maintenance of sports stadium and/or building grounds., • Respond to requests for services in a timely manner., • Respond to staff or administrative requests in a courteous and helpful manner., • Provide leadership and training for custodial staff., • Exhibit knowledge of school policies and procedures., • Prepare reports and maintenance records as assigned., • Coordinate all building maintenance activities., • Monitor budget expenditures and recommend future budget needs to principal., • Ensure the cleanliness and maintenance of campus., • Ensure routine maintenance is performed., • Respond to supervisors in a courteous and helpful manner., • Prepares reports and maintains records as assigned., • Ensures the campus is open and secure at the proper times., • Assist in snow removal or other related duties as necessary., • Ensure the proper operation and care of equipment., • Consult with the supervisor about various job and personnel problems., • Maintain confidence on personnel matters., • Demonstrate professional image through appearance, language, and work ethic., • Successfully prepares the building for inspections., • Perform related duties as assigned. Terms of Employment: 12 months; salary and work year to be determined by the Board of Education. Evaluation: Performance of this position will be evaluated in accordance with provisions of the board policy on evaluation of Support Service Personnel Significant Associations: The performance responsibilities are not limited to those outlined in this description and may include any other responsibilities as assigned by the administrator/supervisor Company DescriptionWe are the largest school district in northeast Kansas. We have 13,000 students and 32 schools PreK-12. This is an in-person position.We are the largest school district in northeast Kansas. We have 13,000 students and 32 schools PreK-12. This is an in-person position.

Job DescriptionPosition Overview The Automotive Technician is responsible for performing intermediate-advanced level diagnostic and repair tasks on a variety of vehicles. This role involves identifying mechanical issues, performing routine maintenance, and conducting repairs under the guidance of senior technicians or shop foreman. The Technician is expected to have a solid understanding of automotive systems and repair techniques, and demonstrate the ability to work independently while occasionally assisting or mentoring less experienced technicians. Key Responsibilities * Diagnostics and Troubleshooting: • Perform diagnostic tests to identify vehicle issues using computerized diagnostic equipment and other tools., • Troubleshoot mechanical and electrical problems, determining the root cause of malfunctions. Repairs and Maintenance: • Conduct intermediate-advanced level repairs on engines, transmissions, brakes, suspension systems, and other vehicle components., • Perform routine maintenance tasks such as oil changes, tire rotations, brake inspections, and fluid replacements., • Replace and repair parts as needed, ensuring all work is performed to industry standards. Technical Proficiency: • Use technical manuals, wiring diagrams, and other resources to aid in repairs and diagnostics., • Stay updated on the latest automotive technologies and repair techniques through ongoing training and professional development. Quality Assurance: • Conduct thorough inspections of vehicles before and after repairs to ensure all work meets quality standards., • Test drive vehicles to verify proper operation and identify any remaining issues. Collaboration and Communication: • Work closely with service advisors to understand customer concerns and provide accurate repair estimates., • Communicate effectively with other technicians and shop staff to ensure efficient workflow and high-quality service., • Mentor and assist less experienced technicians as needed. Tool and Equipment Maintenance: • Maintain and organize personal and shop tools and equipment., • Ensure all tools and equipment are in good working condition and report any issues to management. Safety and Compliance: • Follow all safety protocols and use personal protective equipment (PPE) as required., • Comply with local, state, and federal regulations regarding vehicle repairs and environmental standards., • Properly dispose of hazardous materials according to regulations.Qualifications, • High school diploma or equivalent; additional technical training or certification in automotive repair is preferred., • 2-4 years of experience as an automotive technician or in a related role., • Strong knowledge of automotive systems and intermediate-level repair techniques., • Proficiency in using diagnostic equipment, tools, and software., • Valid driver's license with a clean driving record., • ASE certification or willingness to obtain ASE certification is preferred.Physical Requirements, • Ability to lift and carry parts and equipment up to 50 pounds., • Frequent standing, walking, bending, and reaching., • Ability to work in a shop environment, which may involve exposure to loud noises, dust, and fumes.Work Environment, • Primarily in an automotive repair shop environment., • May involve occasional exposure to extreme temperatures, depending on the season and shop conditions.Performance Metrics, • Accuracy and efficiency in diagnosing and repairing vehicle issues., • Customer satisfaction and feedback., • Adherence to safety protocols and compliance with regulations.

Job DescriptionDescription: HVAC Apprentice Location: Topeka, KS Start Date: July 15, 2025 Schedule: Monday – Friday, 6:00 AM – 3:00 PM Employment Type: Contract-to-Hire Overview: We are seeking a dedicated HVAC Apprentice to join our team in Topeka, Kansas. This is a contract-to-hire opportunity ideal for individuals looking to start or advance their career in the HVAC industry. The successful candidate will assist with installation, maintenance, and repair of heating, ventilation, and air conditioning systems under the supervision of experienced technicians. Key Responsibilities: • Assist in the installation and servicing of HVAC systems and equipment, • Support senior technicians in diagnostics, repairs, and routine maintenance, • Load and unload tools and materials for job sites, • Follow safety procedures and maintain a clean work environment, • Learn and adhere to all company policies and industry standards Qualifications: • High school diploma or GED, • Interest in HVAC systems and willingness to learn, • Ability to work in various weather conditions and lift up to 50 lbs, • Strong work ethic, punctuality, and commitment to safety, • Previous experience or technical training is a plus Compensation & Benefits: • Competitive hourly wage, • Medical, dental, and vision insurance

Job Description NON CDL Box Truck Owner-Operator (OTR) – $5,500 - $7,000 Weekly We are seeking committed contractors to run one of the OTR routes available. You may run under our MC or yours, ensuring a flexible and long partnership. What We Offer: * Weekly gross earnings: $5,500 – $7,000 * Onboarding in as little as 2 days • Fuel card program with discounts, • Sign-on bonus available, • General freight – mostly no-touch No forced dispatch * No factoring fees * OTR freight across 48 states * 2 weeks out * Fuel card program with discounts * Sign-on bonus available * Clean DOT inspection bonus * 24/7 ELD and safety support Requirements: * 24’ or 26’ box truck (model year 2013 or newer) * At least 6 months of verifiable OTR experience * Regular driver's license * No more than 1 moving violation in the past 2 years Reach us today to find out the best available work for you!

In 1979, Bettis Asphalt & Construction, Inc. began with a paving and maintenance operation and a dedication to service. Today the organization operates several lines of business that can cover all areas of need in a construction project. The Bettis Group of Companies today include Bettis Asphalt & Construction, Inc., Mid-States Materials, LLC, Capital Trucking, LLC, Bettis Contractors, Inc., Capital Crane, LLC, Harbour Construction, Inc., Koss Construction Company and Midwest Pavement Grinding, LLC. From rock to road, construction to cranes, our ability to handle a complete job ensures both the best price and the best quality. Bettis Companies hires the industry’s top professionals. Our crews are comprised of individuals who share the same commitment to quality, service, safety, and family. At Bettis, we self-perform the majority of tasks, maintaining strict safety and quality control. Our client list grows steadily because we understand the importance of developing long-term relationships built on trust, performance, and reliability. See the Bettis Companies in action ___. Accounts Receivable Clerk Position Overview: The Accounts Receivable Clerk is responsible for effectively and independently administering A/R processes including cash and credit processing, ACH and EFT transactions and ensuring that those transactions are recorded in the customer’s records in ERP. Communicates with company POC’s on discrepancies and initiates and follows up on all open issues and requests. This position is an office-based position. Essential Duties & Responsibilities: • Processes all customer accounts receivable billings., • Analyze each billing transaction from a sales tax perspective and apply the appropriate taxability status and jurisdiction., • Proactively communicates with project managers to ensure jobs are billed timely and accurately., • Processes & approves all customer account adjustments and credit requests., • Process cash receipts, pre-authorized payments, credit card payments and ACH/EFT batches and record them in ERP to the customer’s records., • Fixes billing issues., • Works closely with credit/collections clerk in reconciliation of cash payments, customer accounts and adjustment/credit amounts while proactively researching and communicating discrepancies., • Processes all related company billings for shared expenses at least monthly., • Process all equipment rental billing, as directed., • Ensures proper maintenance, filing, and storage of records in case of audits., • Follows all verbal and written directions., • Willingness and demonstrative ability to take direction from senior accounting team members., • Not afraid to ask questions and request training., • Participates in required meetings., • Demonstrates initiative to improve own knowledge, skills, and abilities., • Tracks all time worked on timesheet software provided., • Is prepared to answer questions from management and other departments., • Is a productive team member that supports the team by going where needed, assisting where needed, and maintains good working relationships (coworkers, management, and external agencies and vendors)., • Ability to handle a great deal of stress over long periods of time., • Acts in a professional manner., • Good attitude and people skills., • Must foster harmonious interactions and relationships and maintain basic standards of civility in the workplace., • Demonstrates company core values, Service, Family, Safety, Integrity, and Pride., • Attendance, punctuality, and dependability., • Dresses in appropriate attire., • Adheres to the Code of Conduct, and Confidentiality Agreement. Other Duties: Performs other duties as assigned. Qualifications: • High school diploma or equivalent required., • Good customer services skills to deal with both internal and external customers., • Good written and verbal communication skills., • Excellent organizational skills and attention to detail., • Proficient with Microsoft Office Suite or related software., • Proficient with or the ability to quickly learn accounting software., • Must be responsible, self-motivated, self-starter, personable and well organized., • Must pass criminal background check, credit check, and drug screening., • Must read and speak English., • Complies with all applicable safety, environment, health and waste management policies and procedures., • U.S. Citizenship, permanent residency, or work visa is required. Physical Demands: • Must be able to lift a minimum of 15 lbs., • Ability to sit for extended periods of time, up to eight hours per day, though possibly more., • Sufficient manual dexterity to successfully use a computer., • Sometimes required to stand and/or walk, and make occasional trips from the office area to other site buildings or down stairs to lower training meeting rooms. Financial Responsibilities: • Deliver and process banking deposits., • Process ACH & credit card files., • Review banks for EFT deposits, research where they should be applied., • Maintains confidentiality at all times. Communication: Excellent communications skills required due to the need to work with coworkers, supervisors, management, administration, external and internal customers. Excellent communication skills required due to the need to work with all administration and finance, external and internal customers. Maintains employee confidence by keeping employee and payroll information confidential. Does not seek additional employee information outside of payroll related information. Benefits: • 401(k), • 4% match, • Profit sharing eligible after 1st year, • Health insurance (2 options), • HDHP with Health Savings Account ($500 employer funded), • PPO, • Dental insurance, • Vision insurance, • Paid time off, • 3 weeks annually upon hire (pro-rated to date of hire), • 4 weeks after 5 years, • Compensation package:, • Bonus opportunities, • Weekly pay The Bettis Companies are Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Background, and credit check, and post-offer drug screenings may be required.

Riverside Transport is hiring experienced Class A CDL Drivers! RTI is a family-oriented trucking company that cares about its customers, staff, and drivers. Hiring CDL-A Drivers • Experienced drivers earn up to $93,600 per year, • Rewarding signing incentives - $1,500 Sign-On + $500 Orientation When you drive for Riverside Transport you're a part of our family. We want to build long lasting relationships with everyone we employ. We welcome drivers who are looking for consistent pay and benefits, regular home time, and a family work atmosphere that puts people before profits. Company Drivers • Pay: Up to $93,600 per year, • CPM pay range: $0.54-$0.70, • $0.15/mi per diem pay, up to $440 per week, • Additional fuel and safety incentive: $0.02/mi, • Home every 7-10 days, • $1,500 sign-on bonus, • $500 orientation pay, • Dry van freight; 100% no-touch; 60% drop and hook, • Full Benefits - Medical, Dental, Vision Insurance, • 2022 - 2026 equipment, • Uncapped referral program - $4,500 per referral, • High percentage of contracted freight with many FreightWaves "award" shippers, • Paid miles empty and loaded while on duty (do not pay deadhead miles back home) Driver Requirements • Valid Class A CDL, • At least 22 years of age, • 6 months recent OTR experience

Riverside Transport is hiring experienced Class A CDL Drivers! RTI is a family-oriented trucking company that cares about its customers, staff, and drivers. Hiring CDL-A Drivers • Experienced drivers earn up to $93,600 per year, • Rewarding signing incentives - $1,500 Sign-On + $500 Orientation When you drive for Riverside Transport you're a part of our family. We want to build long lasting relationships with everyone we employ. We welcome drivers who are looking for consistent pay and benefits, regular home time, and a family work atmosphere that puts people before profits. Company Drivers • Pay: Up to $93,600 per year, • CPM pay range: $0.54-$0.70, • $0.15/mi per diem pay, up to $440 per week, • Additional fuel and safety incentive: $0.02/mi, • Home every 7-10 days, • $1,500 sign-on bonus, • $500 orientation pay, • Dry van freight; 100% no-touch; 60% drop and hook, • Full Benefits - Medical, Dental, Vision Insurance, • 2022 - 2026 equipment, • Uncapped referral program - $4,500 per referral, • High percentage of contracted freight with many FreightWaves "award" shippers, • Paid miles empty and loaded while on duty (do not pay deadhead miles back home) Driver Requirements • Valid Class A CDL, • At least 22 years of age, • 6 months recent OTR experience

Job DescriptionPosition Title: Case Manager Location: Topeka, KS Position Summary: The Case Manager is responsible for delivering comprehensive case management services to children and families, with a focus on ensuring safety, achieving permanency, and promoting overall well-being. This role involves direct engagement with clients, caregivers, and community partners to coordinate services and support. Education & Experience Requirements: * Bachelor’s or Master’s degree in a human services-related field is required * Previous experience working with children and family services is preferred Licensure & Certifications: * Valid driver’s license * Proof of valid auto insurance * Must be at least 21 years of age * Licensure by the Kansas Behavioral Sciences Regulatory Board (BSRB) is preferred Key Responsibilities: * Demonstrate cultural sensitivity and an understanding of families’ lived experiences, including factors such as trauma, poverty, developmental stages, gender, race, ethnicity, and language * Establish and maintain strong, collaborative relationships with clients, caregivers, placement providers, the Department for Children and Families (DCF), colleagues, and other community partners * Communicate relevant and appropriate information with families and professionals in a timely manner * Provide in-home and community-based services including: * Observation of caregiver-child interactions * Maintenance and development of family and community connections * Resource coordination * On-call crisis intervention and safety planning * Life skills training * Transportation of clients * Administration of drug screenings * Advocate for clients based on comprehensive assessments and ongoing evaluations. Advocacy efforts may include: * Providing testimony in court * Attending school and service coordination meetings * Facilitating access to mental health and other support services * Complete thorough and timely documentation, including: * Case notes and logs * Comprehensive assessments * Court reports and social histories Join Our Team: If you are a dedicated professional committed to making a meaningful difference in the lives of children and families, we encourage you to apply. This role offers the opportunity to work in a supportive, mission-driven environment where your contributions are valued. We are proud to be an equal opportunity employer and are committed to building a diverse and inclusive workforce. Applicants from all backgrounds and life experiences are welcome.

Job Description Overview SiteOne Landscape Supply is the largest national distributor of landscaping products across the United States and Canada. As a leading supplier of wholesale goods for green industry professionals, we have a long history of serving those who design, build, and maintain outdoor spaces – from lawns and gardens to golf courses, sport fields and more. We pride ourselves on knowing our customers and their business better than anyone else and providing them with a one-stop shop of extensive inventory covering irrigation, lighting, turf and landscape maintenance, hardscapes, nursery, and pest control supplies. At SiteOne, we are passionate about delivering an outstanding customer experience and will stop at nothing to help our customers win. We know that our associates are the key to this success, and our commitment to the SiteOne DNA and support for our associates through development programs, benefits, and perks align with our vision to "Be a Great Place to Work for Our Associates". We foster a culture of safety, teamwork, and continuous improvement. With over 800 locations and exciting expansion ahead, now is the perfect time to join SiteOne and grow Stronger Together™! Responsibilities The Green Tech Service Technician provides installation and repair service to customers for a select group of products sold by SiteOne within a specific region. Products include, but are not limited to, central irrigation control systems, prefabricated pump stations, satellite/controller assemblies, solar power systems, fertilizer injection, and filtration systems. What you’ll do: • Professionally represent SiteOne and its products to end users, • Diagnose, repair, and certify products sold by the Company within area of expertise, • Troubleshooting of Two Wire and conventional irrigation systems, • Provide turnkey service to end user, • Provide training on system functions, • Conduct Preconstruction meetings, • Complete documentation and send invoices for customer service and repair jobs upon completion using the SiteOne POS system, • Participate in product demonstration with sales personnel, • Generate Sales leads for the sales team, • Schedule and execute weekly territory plan, • Provide quotes to customers for requested repairs/jobs, • Preform pump installation, repairs, and troubleshooting, • Preform controller installations, repairs, and troubleshooting, • Travel within territory as needed Qualifications • Computer skills – Excel, Word, Outlook and ability to learn proprietary company software, • Certified Irrigation Technician “CIT” certificate or attain within 12 months of hire, • Wire Tracing experience, • Knowledge of hydraulic principles, • Electrical troubleshooting of Irrigation systems and pump controls- Additional training can be provided within 6 months of hire, • Pump repair – Additional training can be provided within 6 months of hire, • Must have a positive attitude with excellent customer relations skills, • Strong desire to learn new products/techniques, • Must have clean DMV record, • Self-motivated with a strong work ethic, • Possess mechanical skills, • Knowledge of central control irrigation systems, • Must have knowledge of National Electric Code (NEC) and how to work safely around pump control panelsEducation and Experience:, • Some college or trade school experience, or 5 years of Landscape knowledge in lieu of trade school, • CIT, CLIA, CIC, or CID certification (preferred), • Five years of experience conducting field troubleshooting experience of central control irrigation systems or pump assemblies preferred (strong knowledge of irrigation pumps, VFDs, and pump control logic preferred), • Competitive Compensation, • Medical, Dental and Vision plans, • Paid Time Off, Paid Holidays, • DailyPay available!, • 401k with company match, • Tuition Reimbursement, • Lucrative Associate Referral Program, • Company Apparel and Work Boot Vouchers, • Opportunity for Advancement, • Paid Training and Business Certifications Available, • Free Counseling Services/Employee Assistance Program, • Life Insurance and Short- and Long-Term Disability Insurance, • Product Discounts, • Most Branches never work Sundays! THE INFORMATION CONTAINED HEREIN IS NOT INTENDED TO BE AN EXHAUSTIVE LIST OF ALL RESPONSIBILITIES, DUTIES AND QUALIFICATIONS REQUIRED OF INDIVIDUALS PERFORMING THE JOB. THE QUALIFICATIONS DETAILED IN THIS JOB DESCRIPTION ARE NOT CONSIDERED THE MINIMUM REQUIREMENTS NECESSARY TO PERFORM THE JOB, BUT RATHER AS GUIDELINES. THEY MAY VARY FROM POSITION TO POSITION. SiteOne Landscape Supply is strongly committed to providing equal employment opportunities for all associates and all applicants for employment. All employment decisions at SiteOne-including those relating to hiring, promotion, transfers, benefits, compensation, placement, and termination-will be made without regard to race, color, national origin, genetic information, creed, sex, sexual orientation, gender, gender identity, religion, age, veteran status, uniform service, pregnancy, disability, or any other factor protected by applicable law. If you are ever unsure whether a message is really from SiteOne, here’s how to protect yourself from recruiting scams: • SiteOne will never ask for payment, sensitive personal info, or documents over email, messaging apps., or interviews, • SiteOne job related emails will be sent with a @siteone.com. All other variations are likely fraudulent.

Job DescriptionSalary: $45,000-$47,000 Topeka, KS66612 Job Summary Performlaboron all phases ofbridge construction including demolition, substructure and superstructure using various types of tools.Work Monday to Friday andoccasional weekends, usually 40 - 50 hours per week. Essential Functions • Attend work as scheduled, • Get along with others, • Follow company handbooks and other instructions, • Communicate in a way others will understand, • Do general excavation and leveling using a shovel, pick, tamper or jackhammer, • Align, place and tie reinforcing steel of various sizes, • Vibrate concrete inside forms, • Set beams, tie rebar and strip decks, • Carry lumber, plywood, reinforcing steel and other materials, • Pour and level concrete, • Read andunderstandSafety Data Sheets and container labels, • Identify and communicate safety concerns to management in a timely manner Education • Normal range of vision and hearing (with correction), • Effectively work at heights, • Walk on uneven ground, stand, climb, bend, kneel, reach, lift and balance, • Lift up to 75 pounds on a regular basis, • Medical, • Dental, • Life, • Flexible Spending Account, • 401K with company match, • Vacation after 1 year of employment, • Per diem (determined by job and conditions) Annual wages: $45,000 - $47,000

Job Description Capitol Concrete Products Inc., a proud supplier of masonry and hardscape products and accessories is looking to fill the position of Class A Truck Driver – Flatbed. This is a full-time non-exempt union position with a starting wage of $24. Generally, the schedule will be Monday – Friday. This position will drive a tractor-transport trailer to deliver raw materials over the road to and from specific sites and designated destinations. Benefits are through the union along with a 401k plan. See the job description for more details. Job Requirements • Combination of education, training, and experience to perform the duties as required., • Knowledge or experience with driving a semi-tractor, trailer, and forklift. Additionally, knowledge about concrete block, masonry products, hardscape products, and other building materials with the ability to work safely or the ability to be trained., • Must have physical strength to perform required duties of the position. (Handles and moves objects and equipment with the potential weight up to 100 pounds)., • Ability to concentrate on tasks and projects., • Ability to understand and communicate with management and co-workers in order to carry out the duties and tasks assigned. (Communication Proficiency), • Ability to take orders, instructions, and guidance from supervisors., • Ability to read and speak English sufficiently to converse with the general public, to understand highway traffic signs and signals, to respond to official inquiries, and to make entries on reports and records (Part 391.11(b)(2)), • Possess a valid Commercial Driver's License (CDL) Class A license with appropriate endorsements., • Maintains a satisfactory driving record in accordance with Federal and State Motor Carrier regulations and company policy., • Ability to expedite communication to supervisors and/or appropriate personnel needed for mechanical repairs or addressing other issues of concern., • Teamwork with ability to operate on own initiative., • Highly disciplined to follow through with assignments and tasks., • Must be able to pass federal DOT drug / alcohol screening and physical as well as random drug screenings., • Adheres to safety requirements and procedures and wearing of required safety equipment and clothing., • Operate Company Vehicles and equipment i.e. semi-tractor, forklift etc., • Ensures that property, safety, and incident reporting procedures are followed., • Occasionally walk / carry objects on varying terrain – paved, unpaved, dirt, rough terrain, etc., • Requires balance and equilibrium when climbing ladder and on / off equipment as well as moving through the production facility, yard, and job sites., • Continuously work in various weather conditions – hot, cold, wet, dry, humid, wind etc., • Performs materials transportation, handling, and storage., • Maintains accurate and timely paperwork load tickets, return tickets, logbook, fuel receipts etc. Essential Duties and Responsibilities • This position is a full-time position that may require long hours and weekend work or after-hours duty. Work schedule may vary based on supply and demand., • This position is required to perform work under adverse weather conditions such as heat, cold, and outdoor conditions which may include rain, snow, wind, heat and/or cold., • Perform various tasks, activities, duties or responsibilities required of this employee for this job., • At start of shift, perform a pre-shift inspection of equipment i.e. tractor, trailer, forklift etc. to ensure it is safe to operate., • Drives truck and trailer equipped to pick up and then deliver masonry, hardscape, and other building materials to specific sites by performing the following duties., • Reports repair needs identified during pre-trip and post-trip inspections to management., • Assists yard operations by helping in loading of materials and operating equipment., • Obtain required repairs; ensuring truck is safe to operate in accordance with DOT regulations and company policy., • Cross check and confirm all materials loaded match the ticket for delivery., • Display professional and courteous attitude with customers, vendors, and coworkers at all times., • Product knowledge to assist and inform customers., • Adequately secures load prior to leaving loading area., • Delivers load by identifying destinations; establishing route; operating the truck; maintaining schedule., • Transportation of the load to its required destination in a safe and timely manner by driving in and out of areas with heavy pedestrian traffic, various obstacles, and road driving conditions., • Move levers to lower and tilt forks driving forklift into position to pick up pallets and other materials., • Move levers and pedals to raise and tilt mast when loaded to placing material into its designated row, onto the bed of a trailer, or in the bed of a truck., • Operate company equipment as needed, which may include but not limited to, tractor, forklift, and other company vehicles or equipment., • Delivery of the load and the timely removal of the product from the trailer to the destination site., • Moves levers, pedals, or controls as needed to complete the delivery of the load., • Consistently greasing, cleaning, and oiling equipment., • Monitors truck and other company equipment to ensure appearance, safety and proper maintenance levels., • Keeps proper records and documents daily activities., • Cleans truck and trailer after delivery., • Maintains high level of customer service. Physical Requirements • Physical demand requires Moderate level work:, • Exert up to 100 pounds of force occasionally, and/or, • Up to 40 pounds of force frequently, and/or, • A negligible amount of force constantly to move objects., • Other physical/work conditions may include but not be limited to., • Must possess a current Medical Card as required by Department of Transportation (DOT) Regulations as approved by the Company, • Consistently reaching above shoulders to climb into and out of equipment, strapping down, climbing ladder, loading materials, and various job specific tasks repetitively throughout work period., • Constantly required to hear sounds, and have clarity of near, far, and peripheral sight with depth perception, • Perform duty in working conditions where sounds and noise levels require hearing protection;, • Perform work in conditions that may also include contaminants, hazardous equipment, hazardous situations, • Perform work that requires pushing, lifting, pulling, or carrying objects; use of abdominal and lower back muscles to provide physical support to operations as needed., • Perform work in areas where hazardous conditions can exist where employees are to be observant of not being caught in, on, or under machinery and/or equipment. Work areas may include the operation of forklifts maneuvering throughout the work area. Finished materials being lifted overhead and placed on trailers or within designated storage areas., • Lift heavy objects and perform strenuous physical labor under adverse conditions. (Refer to physical functional analysis for this job classification.), • Employees are required to wear hard hats, safety glasses and heavy protection steel-toed boots., • The employee will be required to bend, twist the body, and make repetitive motions., • Good manual dexterity (hand with arm, two hands and multi-limb coordination), • Excellent stamina., • Constantly required to push / pull levers, turn steering wheel and press / release foot pedals while operating company equipment i.e. semi-tractor and forklift, • Occasionally climbs onto trailer to perform other various tasks before safely climbing back down., • Continuously work in various weather conditions – hot, cold, wet, dry, humid, wind, etc., • Frequently walk / carry objects on varying terrain – paved, unpaved, dirt, rough terrain, etc., • Required to sit while operating semi-tractor and forklift., • Required to be standing and moving while sorting, stacking, and inspecting materials. Constantly getting on and off equipment to interact with employees and customers and load materials as needed. We do conduct drug and alcohol pre-employment screenings. Job Posted by ApplicantPro

Job Description Full job description Trainee Opening: Yes, straight salary pays for 4 to 6 weeks of Training - $650/week No touch Freight • We are seeking a reliable and skilled Truck Driver to join our team. The ideal candidate will be responsible for transporting goods safely and efficiently while adhering to all safety regulations and company policies., • Earning per week: $ 1,200 to $ 1,400, • Training Pay: $650 per week, • Driving Dry Van and some Refrigerated Loads to deliver designated locations., • Conduct pre-trip and post-trip inspections of the vehicle to ensure safety and compliance with regulations., • Maintain accurate delivery logs and documentation as required by company policies., • Communicate effectively with dispatchers and customers regarding delivery schedules and any issues that may arise during transport., • Valid Class A CDL license, • Must be at least 21 years’ old, • Minimum 0 months’ experience, • Willing to work Over-the-Road (OTR), • Excellent time management skills with the ability to meet deadlines. Anthony directly at (404) 300-9003. Job Type: Full-time Pay: $1,200.00 - $1,400.00 per week Benefits: • 401(k) matching, • Disability insurance, • Employee assistance program, • Life insurance, • Paid orientation, • Paid training, • Passenger ride along program, • Pet rider program, • Prescription drug insurance, • Bonus opportunities, • Detention pay, • Performance bonus, • Safety bonus, • Company driver Vision Truck Line LLC is a licensed contract carrier and property broker as defined by the Federal Motor Carrier Administration and the United States Department of Transportation. Headquartered in Conley, GA 30288 contracted throughout the continental United States. Our company has maintained late model fleets of tractor and trailers equipment with GPS tracking and Air Resources Board compliant devices. The entirety of this site is protected by copyright 2025 VisionTruckLine.com

Job DescriptionDescription: CDL Delivery Trainee with Career Advancement! $18.40-$20.20 per Hour Are you ready to kickstart your career in the fast-paced world of beer delivery? Crown Distributors is seeking motivated individuals to join our team as CDL Delivery Driver Trainees. This is an excellent opportunity to learn a valuable skill set and advance into a rewarding career in the beverage business. About the Role: As a CDL Delivery Driver Trainee, you will undergo comprehensive training to obtain your Commercial Driver's License (CDL) permit and Class-A CDL. Our dedicated training program covers theory, vehicle inspections, driving maneuvers, and on-road experience with a one-on-one instructor. Upon obtaining your CDL, you will continue your training, learning the fundamentals of beverage delivery, including but not limited to customer service, inventory control and product handling. With consistent performance and dedication, when a route comes open, you will have the opportunity to advance as a route delivery driver. What you'll get: • 100% company-paid CDL training, • Advancement and career growth., • Comprehensive benefits package including medical, dental, vision, paid vacation, and generous discounts on beverages., • Up to 20 days paid time off your first year, • 401(k) Match: Up to 5% of your contributions, with a 2-year vesting period for company contributions., • Get paid when you need it with on-demand pay., • A collaborative work environment with a focus on teamwork and professional development, • Do you thrive in a fast-paced environment and enjoy tackling challenges head-on?, • Do you possess a strong work ethic, a commitment to safety, and a positive customer service approach?, • Do you have a clean driving record and are you dependable with a can-do attitude?, • Do you have a clean background At Crown Distributors, we are more than just a beer distributor. We are a passionate team of beverage enthusiasts who are committed to providing our customers with the best possible service. We offer a competitive salary and benefits package, as well as opportunities for professional growth and advancement. If you are looking for a challenging and rewarding career, we encourage you to apply! While we sincerely appreciate all applications, only candidates selected for an interview will be contacted. Applications will be accepted until the position is filled. Requirements: Clean driving record Please note selected candidates will be subject to an MVR & criminal background check and a pre-employment physical/drug screen.

Job Description Looking for Drivers with at least 6 months’ experience to run our Intermodal account running from our Edwardsville location. Great pay potential and home DAILY!! Job Details -100% no touch Intermodal Trailers -Home DAILY!! -Sun-Thur or Tue–Sat night shift -Average miles a week is around 1100. Requirements • Must be 21 with Valid Class A CDL with 6 months Class A experience., • Must have clean driving record with no accidents, tickets, or suspensions within the past 5 years., • Cannot have been terminated from last job due to safety concerns., • No DUI's in last 5 years. All criminal offenses will be reviewed on an individual basis by safety, • Must have solid 10-year work history with no major gaps of employment outside of school or training., • Must be able to pass a Urine AND HAIR pre-employment drug screen., • Must live within 50 miles of Edwardsville, KS. Benefits • The pay is $13.75 per hour plus $35.02 per load., • Generous load bonuses of $1000 (50 loads), $500 (75 loads), $250 (100 loads), $250 (125 loads). $250 (150 loads) per month paid per milestone hit., • $1200 -$1300 per week average (plus bonuses), • Full benefits that kick in after 30 days including medical, dental, 401K and PTO

Job Description We invite Class A Drivers, both new and experienced, to apply for our Dedicated account driving position. You will operate 53’ refrigerated trailers across the Central and Western regions. Enjoy either daily home time or weekly home time based on your preference. We value drivers of all experience levels and welcome you to our team! • 53’ Refer Trailers with a Dedicated account in their grocery division, • 100% no touch freight with a mix of drop and hook and live store load/unloads, • Weekly set home time with at least a 34-hour reset., • Daily home time if you live within 50 miles of Harrisonville, MO (slip seat trucks), • The driver must be willing to drive during the day or during the night., • Must be 21 with Valid Class A CDL with at least 1-year recent driving experience., • Must have a fairly clean driving record with no major accidents, major tickets, or suspensions within the past 5 years., • Cannot have been terminated from last job., • No DUI's Felonies, Misdemeanors in the last 5 years. Safety to review all criminal offenses., • Must have solid 10-year work history with no major gaps of employment outside of school or training. 6 months in the last year or 1 year in the last 3 years maximum unemployment., • $1100 - $1200 week., • 49 - .60. per mile depending on experience. Night and weekend differential pay., • $10 first stop pay - $15 each stop after., • $25 short haul pay for all loads under 50 miles., • Trainees are paid $650/week for 4-6 weeks if under 6 months experience, • .06 per mile monthly bonus for over 8200 miles driven, no accidents, fuel at 7 MPG., • Full benefits that kick in after 30 days including medical, dental, 401K and PTO

Job Description ???? Join Our Team as a Driver at KVC Health Systems! ???? Location: Topeka, KS Area Schedule: Monday - Friday 1 pm to 6 pm. Part time, 20 hours per week guaranteed. Do you have a passion for helping children and making a positive impact in their lives? KVC Health Systems is seeking a part-time Driver to provide safe and reliable transportation for children within our service system. This is a unique opportunity to work with a compassionate team in a rewarding, mission-driven environment. What You’ll Do: • Transport Children Safely & Securely to foster care placements across the Topeka area., • Ensure Timely Pickups & Drop-offs with utmost professionalism and care., • Monitor & Document Behavior while maintaining a safe, positive atmosphere for the kids., • Maintain a Clean & Operational Vehicle ensuring the highest level of safety. ✅ High School Diploma or GED ✅ Must be 21 or older ✅ Valid Driver’s License & Auto Insurance ✅ Experience with Children/Families Required– Your experience will help make a difference! Why We Need You: Your role is crucial in helping children transition safely and comfortably into foster care. We’re looking for someone who’s dedicated, compassionate, and reliable to provide the care and support these children need during their journeys. Why Choose KVC? ???? $17.50 per Hour – Competitive Pay! ????️‍♀️ Wellness Benefits – Mental Health Support, Health Screenings, & More! About KVC: We are a nonprofit child placing and behavioral health agency with a long-standing legacy of compassionately serving children and families. At KVC, we believe in work-life balance and are proud of the supportive work environment we offer. Our 82 Work Wellbeing Score on Indeed places us in the top 1% of employers nationally. Join us and become part of a team where you can truly make a difference in the lives of children and families. KVC is an Equal Opportunity Employer: We welcome applications from individuals of all backgrounds and experiences. Diversity and inclusion are important to us, and we are committed to building a diverse and supportive workplace for all. Are you ready to make a difference? Apply today and drive positive change with KVC Health Systems! ????

Does this position interest you? You should apply – even if you don’t match every single requirement! We're known as an auto glass company. That's the focus of what we do. But beyond the glass, we're so much more. We'll help you build a fulfilling career and encourage you to have a life. Let us be the best place you'll ever work. A Brief Overview A Technician Trainee will be trained and educated to become a proficient auto glass technician. Upon completing our training program, the trainee will receive the Safelite SafeTech certification and will possess fundamental skills necessary for performing unsupervised glass repair, replacement and recalibrations. The trainee is expected to embody the Safelite Spirit with a can-do attitude, caring heart and service mindset while striving to bring unexpected happiness to customers by completing jobs timely and with the highest quality standards. What you will do • Be paid to learn and apprentice the Safelite way, through hands-on and classroom training, including:, • Observing and assisting in installing and repairing auto glass, • Recalibrating automotive safety systems, including trouble-shooting and completing diagnostic testing, • Providing additional services & products, • Study and pass testing to become a Safelite-certified Technician showing proficiency in installations, embracing a positive attitude and following taught techniques., • Safely operate company and customer vehicles, company-issued tools and chemicals utilized throughout the workday., • Performs other duties as assigned, • Complies with all policies and standards What you’ll get: • Competitive weekly pay starting at $19.25/hour, increasing to $22.75/hour after training and certification., • Earn $5/set of wiper blades when added for customer safety., • A benefits package valued at more than $10k*. Includes 401(k) plan with company matching, medical plans, paid time off, holidays & volunteer days., • Program to buy additional PTO or sell unused time up to 16 hours., • Up to $5,250 annually in tuition reimbursement., • Paid training and all the tools and resources you'll need to be successful. Education Qualifications • High School Diploma GED/Equivalent Preferred, • Valid state-issued driver’s license any other license(s) (as required by federal, state and local laws) to operate a company vehicle. Required Experience Qualifications • Must be 18 years of age or older Required Skills and Abilities • Ability to regularly lift and carry up to 35 pounds and occasionally lift and carry up to 50 pounds., • Ability to stand for extended periods, work in tight spaces, bend and twist body, • Ability to use a variety of hand tools and power tools safely and effectively, • Ability to operate a motor vehicle in accordance with all federal, state and local laws and agreement to be monitored via in-cab vehicle safety camera / video surveillance technology, • Maintains professionalism and passion for providing outstanding customer service and exceeding customer expectations, • Ability to safely work outside (in a wide variety of weather conditions and extreme temperatures) for extended periods, • Ability to work with chemicals (including but not limited to flammable chemicals), as applicable per the “Safelite Way of Fitting”, • Ability to work scheduled days, with flexibility on start and end times to accommodate customer’s needs, • Proficiency in using computerized diagnostic tools to complete recalibrations and trouble-shoot issues, • Problem-solving and ability to trouble-shoot issues, independently and collaboratively, • Ability to read, write and interpret the English language and technical directions, • Ability to communicate orally (via phone) and written (via computer or other electronic means), • Ability to maintain a professional appearance, adhering to Company dress code and PPE policies, • Willingness and ability to maintain stable performance under professional or personal pressure and/or opposition (e.g., time pressure and productivity measures). This job description in no way states or implies that these are the only duties to be performed by an employee occupying this position. Employees may be required to perform other related duties as assigned to ensure workload coverage. This job description does NOT constitute an employment agreement between the employer and employee and is subject to change by the employer as the organizational needs and requirements of the job change. #LI-EC1 This job description in no way states or implies that these are the only duties to be performed by an employee occupying this position. Employees may be required to perform other related duties as assigned to ensure workload coverage. This job description does NOT constitute an employment agreement between the employer and employee and is subject to change by the employer as the organizational needs and requirements of the job change. This position description is not all inclusive for every aspect of this role. Reasonable accommodations will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not, and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job’s essential duties because of an ADA disability. Other qualifications may be required to ensure employment eligibility in accordance with local laws, regulations and with Safelite Group, Inc. policies and practices. -- Internal Associates: Already a member of the Safelite team? Apply through your Workday account by searching "Find Open Jobs". Diversity: Safelite welcomes everyone. We value our diverse workforce and suppliers, and we’re proud to be an equal opportunity employer. Learn more at Careers Benefit amounts are estimates only. Actual values will depend on benefit elections during enrollment. This position description is not all inclusive for every aspect of this role. Reasonable accommodation will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job’s essential duties because of an ADA disability.

Does this position interest you? You should apply – even if you don’t match every single requirement! We're known as an auto glass company. That's the focus of what we do. But beyond the glass, we're so much more. We'll help you build a fulfilling career and encourage you to have a life. Let us be the best place you'll ever work. A Brief Overview A Technician Trainee will be trained and educated to become a proficient auto glass technician. Upon completing our training program, the trainee will receive the Safelite SafeTech certification and will possess fundamental skills necessary for performing unsupervised glass repair, replacement and recalibrations. The trainee is expected to embody the Safelite Spirit with a can-do attitude, caring heart and service mindset while striving to bring unexpected happiness to customers by completing jobs timely and with the highest quality standards. What you will do • Be paid to learn and apprentice the Safelite way, through hands-on and classroom training, including:, • Observing and assisting in installing and repairing auto glass, • Recalibrating automotive safety systems, including trouble-shooting and completing diagnostic testing, • Providing additional services & products, • Study and pass testing to become a Safelite-certified Technician showing proficiency in installations, embracing a positive attitude and following taught techniques., • Safely operate company and customer vehicles, company-issued tools and chemicals utilized throughout the workday., • Performs other duties as assigned, • Complies with all policies and standards What you’ll get: • Competitive weekly pay starting at $19.25/hour, increasing to $22.75/hour after training and certification., • Earn $5/set of wiper blades when added for customer safety., • A benefits package valued at more than $10k*. Includes 401(k) plan with company matching, medical plans, paid time off, holidays & volunteer days., • Program to buy additional PTO or sell unused time up to 16 hours., • Up to $5,250 annually in tuition reimbursement., • Paid training and all the tools and resources you'll need to be successful. Education Qualifications • High School Diploma GED/Equivalent Preferred, • Valid state-issued driver’s license any other license(s) (as required by federal, state and local laws) to operate a company vehicle. Required Experience Qualifications • Must be 18 years of age or older Required Skills and Abilities • Ability to regularly lift and carry up to 35 pounds and occasionally lift and carry up to 50 pounds., • Ability to stand for extended periods, work in tight spaces, bend and twist body, • Ability to use a variety of hand tools and power tools safely and effectively, • Ability to operate a motor vehicle in accordance with all federal, state and local laws and agreement to be monitored via in-cab vehicle safety camera / video surveillance technology, • Maintains professionalism and passion for providing outstanding customer service and exceeding customer expectations, • Ability to safely work outside (in a wide variety of weather conditions and extreme temperatures) for extended periods, • Ability to work with chemicals (including but not limited to flammable chemicals), as applicable per the “Safelite Way of Fitting”, • Ability to work scheduled days, with flexibility on start and end times to accommodate customer’s needs, • Proficiency in using computerized diagnostic tools to complete recalibrations and trouble-shoot issues, • Problem-solving and ability to trouble-shoot issues, independently and collaboratively, • Ability to read, write and interpret the English language and technical directions, • Ability to communicate orally (via phone) and written (via computer or other electronic means), • Ability to maintain a professional appearance, adhering to Company dress code and PPE policies, • Willingness and ability to maintain stable performance under professional or personal pressure and/or opposition (e.g., time pressure and productivity measures). This job description in no way states or implies that these are the only duties to be performed by an employee occupying this position. Employees may be required to perform other related duties as assigned to ensure workload coverage. This job description does NOT constitute an employment agreement between the employer and employee and is subject to change by the employer as the organizational needs and requirements of the job change. #LI-EC1 This job description in no way states or implies that these are the only duties to be performed by an employee occupying this position. Employees may be required to perform other related duties as assigned to ensure workload coverage. This job description does NOT constitute an employment agreement between the employer and employee and is subject to change by the employer as the organizational needs and requirements of the job change. This position description is not all inclusive for every aspect of this role. Reasonable accommodations will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not, and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job’s essential duties because of an ADA disability. Other qualifications may be required to ensure employment eligibility in accordance with local laws, regulations and with Safelite Group, Inc. policies and practices. -- Internal Associates: Already a member of the Safelite team? Apply through your Workday account by searching "Find Open Jobs". Diversity: Safelite welcomes everyone. We value our diverse workforce and suppliers, and we’re proud to be an equal opportunity employer. Learn more at Careers Benefit amounts are estimates only. Actual values will depend on benefit elections during enrollment. This position description is not all inclusive for every aspect of this role. Reasonable accommodation will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job’s essential duties because of an ADA disability.

Does this position interest you? You should apply – even if you don’t match every single requirement! We're known as an auto glass company. That's the focus of what we do. But beyond the glass, we're so much more. We'll help you build a fulfilling career and encourage you to have a life. Let us be the best place you'll ever work. A Brief Overview A Technician Trainee will be trained and educated to become a proficient auto glass technician. Upon completing our training program, the trainee will receive the Safelite SafeTech certification and will possess fundamental skills necessary for performing unsupervised glass repair, replacement and recalibrations. The trainee is expected to embody the Safelite Spirit with a can-do attitude, caring heart and service mindset while striving to bring unexpected happiness to customers by completing jobs timely and with the highest quality standards. What you will do • Be paid to learn and apprentice the Safelite way, through hands-on and classroom training, including:, • Observing and assisting in installing and repairing auto glass, • Recalibrating automotive safety systems, including trouble-shooting and completing diagnostic testing, • Providing additional services & products, • Study and pass testing to become a Safelite-certified Technician showing proficiency in installations, embracing a positive attitude and following taught techniques., • Safely operate company and customer vehicles, company-issued tools and chemicals utilized throughout the workday., • Performs other duties as assigned, • Complies with all policies and standards What you’ll get: • Competitive weekly pay starting at $19.25/hour, increasing to $22.75/hour after training and certification., • Earn $5/set of wiper blades when added for customer safety., • A benefits package valued at more than $10k*. Includes 401(k) plan with company matching, medical plans, paid time off, holidays & volunteer days., • Program to buy additional PTO or sell unused time up to 16 hours., • Up to $5,250 annually in tuition reimbursement., • Paid training and all the tools and resources you'll need to be successful. Education Qualifications • High School Diploma GED/Equivalent Preferred, • Valid state-issued driver’s license any other license(s) (as required by federal, state and local laws) to operate a company vehicle. Required Experience Qualifications • Must be 18 years of age or older Required Skills and Abilities • Ability to regularly lift and carry up to 35 pounds and occasionally lift and carry up to 50 pounds., • Ability to stand for extended periods, work in tight spaces, bend and twist body, • Ability to use a variety of hand tools and power tools safely and effectively, • Ability to operate a motor vehicle in accordance with all federal, state and local laws and agreement to be monitored via in-cab vehicle safety camera / video surveillance technology, • Maintains professionalism and passion for providing outstanding customer service and exceeding customer expectations, • Ability to safely work outside (in a wide variety of weather conditions and extreme temperatures) for extended periods, • Ability to work with chemicals (including but not limited to flammable chemicals), as applicable per the “Safelite Way of Fitting”, • Ability to work scheduled days, with flexibility on start and end times to accommodate customer’s needs, • Proficiency in using computerized diagnostic tools to complete recalibrations and trouble-shoot issues, • Problem-solving and ability to trouble-shoot issues, independently and collaboratively, • Ability to read, write and interpret the English language and technical directions, • Ability to communicate orally (via phone) and written (via computer or other electronic means), • Ability to maintain a professional appearance, adhering to Company dress code and PPE policies, • Willingness and ability to maintain stable performance under professional or personal pressure and/or opposition (e.g., time pressure and productivity measures). This job description in no way states or implies that these are the only duties to be performed by an employee occupying this position. Employees may be required to perform other related duties as assigned to ensure workload coverage. This job description does NOT constitute an employment agreement between the employer and employee and is subject to change by the employer as the organizational needs and requirements of the job change. #LI-EC1 This job description in no way states or implies that these are the only duties to be performed by an employee occupying this position. Employees may be required to perform other related duties as assigned to ensure workload coverage. This job description does NOT constitute an employment agreement between the employer and employee and is subject to change by the employer as the organizational needs and requirements of the job change. This position description is not all inclusive for every aspect of this role. Reasonable accommodations will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not, and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job’s essential duties because of an ADA disability. Other qualifications may be required to ensure employment eligibility in accordance with local laws, regulations and with Safelite Group, Inc. policies and practices. -- Internal Associates: Already a member of the Safelite team? Apply through your Workday account by searching "Find Open Jobs". Diversity: Safelite welcomes everyone. We value our diverse workforce and suppliers, and we’re proud to be an equal opportunity employer. Learn more at Careers Benefit amounts are estimates only. Actual values will depend on benefit elections during enrollment. This position description is not all inclusive for every aspect of this role. Reasonable accommodation will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job’s essential duties because of an ADA disability.

Does this position interest you? You should apply – even if you don’t match every single requirement! We're known as an auto glass company. That's the focus of what we do. But beyond the glass, we're so much more. We'll help you build a fulfilling career and encourage you to have a life. Let us be the best place you'll ever work. A Brief Overview A Technician Trainee will be trained and educated to become a proficient auto glass technician. Upon completing our training program, the trainee will receive the Safelite SafeTech certification and will possess fundamental skills necessary for performing unsupervised glass repair, replacement and recalibrations. The trainee is expected to embody the Safelite Spirit with a can-do attitude, caring heart and service mindset while striving to bring unexpected happiness to customers by completing jobs timely and with the highest quality standards. What you will do • Be paid to learn and apprentice the Safelite way, through hands-on and classroom training, including:, • Observing and assisting in installing and repairing auto glass, • Recalibrating automotive safety systems, including trouble-shooting and completing diagnostic testing, • Providing additional services & products, • Study and pass testing to become a Safelite-certified Technician showing proficiency in installations, embracing a positive attitude and following taught techniques., • Safely operate company and customer vehicles, company-issued tools and chemicals utilized throughout the workday., • Performs other duties as assigned, • Complies with all policies and standards What you’ll get: • Competitive weekly pay starting at $19.25/hour, increasing to $22.75/hour after training and certification., • Earn $5/set of wiper blades when added for customer safety., • A benefits package valued at more than $10k*. Includes 401(k) plan with company matching, medical plans, paid time off, holidays & volunteer days., • Program to buy additional PTO or sell unused time up to 16 hours., • Up to $5,250 annually in tuition reimbursement., • Paid training and all the tools and resources you'll need to be successful. Education Qualifications • High School Diploma GED/Equivalent Preferred, • Valid state-issued driver’s license any other license(s) (as required by federal, state and local laws) to operate a company vehicle. Required Experience Qualifications • Must be 18 years of age or older Required Skills and Abilities • Ability to regularly lift and carry up to 35 pounds and occasionally lift and carry up to 50 pounds., • Ability to stand for extended periods, work in tight spaces, bend and twist body, • Ability to use a variety of hand tools and power tools safely and effectively, • Ability to operate a motor vehicle in accordance with all federal, state and local laws and agreement to be monitored via in-cab vehicle safety camera / video surveillance technology, • Maintains professionalism and passion for providing outstanding customer service and exceeding customer expectations, • Ability to safely work outside (in a wide variety of weather conditions and extreme temperatures) for extended periods, • Ability to work with chemicals (including but not limited to flammable chemicals), as applicable per the “Safelite Way of Fitting”, • Ability to work scheduled days, with flexibility on start and end times to accommodate customer’s needs, • Proficiency in using computerized diagnostic tools to complete recalibrations and trouble-shoot issues, • Problem-solving and ability to trouble-shoot issues, independently and collaboratively, • Ability to read, write and interpret the English language and technical directions, • Ability to communicate orally (via phone) and written (via computer or other electronic means), • Ability to maintain a professional appearance, adhering to Company dress code and PPE policies, • Willingness and ability to maintain stable performance under professional or personal pressure and/or opposition (e.g., time pressure and productivity measures). This job description in no way states or implies that these are the only duties to be performed by an employee occupying this position. Employees may be required to perform other related duties as assigned to ensure workload coverage. This job description does NOT constitute an employment agreement between the employer and employee and is subject to change by the employer as the organizational needs and requirements of the job change. #LI-EC1 This job description in no way states or implies that these are the only duties to be performed by an employee occupying this position. Employees may be required to perform other related duties as assigned to ensure workload coverage. This job description does NOT constitute an employment agreement between the employer and employee and is subject to change by the employer as the organizational needs and requirements of the job change. This position description is not all inclusive for every aspect of this role. Reasonable accommodations will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not, and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job’s essential duties because of an ADA disability. Other qualifications may be required to ensure employment eligibility in accordance with local laws, regulations and with Safelite Group, Inc. policies and practices. -- Internal Associates: Already a member of the Safelite team? Apply through your Workday account by searching "Find Open Jobs". Diversity: Safelite welcomes everyone. We value our diverse workforce and suppliers, and we’re proud to be an equal opportunity employer. Learn more at Careers Benefit amounts are estimates only. Actual values will depend on benefit elections during enrollment. This position description is not all inclusive for every aspect of this role. Reasonable accommodation will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job’s essential duties because of an ADA disability.

Does this position interest you? You should apply – even if you don’t match every single requirement! We're known as an auto glass company. That's the focus of what we do. But beyond the glass, we're so much more. We'll help you build a fulfilling career and encourage you to have a life. Let us be the best place you'll ever work. A Brief Overview A Technician Trainee will be trained and educated to become a proficient auto glass technician. Upon completing our training program, the trainee will receive the Safelite SafeTech certification and will possess fundamental skills necessary for performing unsupervised glass repair, replacement and recalibrations. The trainee is expected to embody the Safelite Spirit with a can-do attitude, caring heart and service mindset while striving to bring unexpected happiness to customers by completing jobs timely and with the highest quality standards. What you will do • Be paid to learn and apprentice the Safelite way, through hands-on and classroom training, including:, • Observing and assisting in installing and repairing auto glass, • Recalibrating automotive safety systems, including trouble-shooting and completing diagnostic testing, • Providing additional services & products, • Study and pass testing to become a Safelite-certified Technician showing proficiency in installations, embracing a positive attitude and following taught techniques., • Safely operate company and customer vehicles, company-issued tools and chemicals utilized throughout the workday., • Performs other duties as assigned, • Complies with all policies and standards What you’ll get: • Competitive weekly pay starting at $19.25/hour, increasing to $22.75/hour after training and certification., • Earn $5/set of wiper blades when added for customer safety., • A benefits package valued at more than $10k*. Includes 401(k) plan with company matching, medical plans, paid time off, holidays & volunteer days., • Program to buy additional PTO or sell unused time up to 16 hours., • Up to $5,250 annually in tuition reimbursement., • Paid training and all the tools and resources you'll need to be successful. Education Qualifications • High School Diploma GED/Equivalent Preferred, • Valid state-issued driver’s license any other license(s) (as required by federal, state and local laws) to operate a company vehicle. Required Experience Qualifications • Must be 18 years of age or older Required Skills and Abilities • Ability to regularly lift and carry up to 35 pounds and occasionally lift and carry up to 50 pounds., • Ability to stand for extended periods, work in tight spaces, bend and twist body, • Ability to use a variety of hand tools and power tools safely and effectively, • Ability to operate a motor vehicle in accordance with all federal, state and local laws and agreement to be monitored via in-cab vehicle safety camera / video surveillance technology, • Maintains professionalism and passion for providing outstanding customer service and exceeding customer expectations, • Ability to safely work outside (in a wide variety of weather conditions and extreme temperatures) for extended periods, • Ability to work with chemicals (including but not limited to flammable chemicals), as applicable per the “Safelite Way of Fitting”, • Ability to work scheduled days, with flexibility on start and end times to accommodate customer’s needs, • Proficiency in using computerized diagnostic tools to complete recalibrations and trouble-shoot issues, • Problem-solving and ability to trouble-shoot issues, independently and collaboratively, • Ability to read, write and interpret the English language and technical directions, • Ability to communicate orally (via phone) and written (via computer or other electronic means), • Ability to maintain a professional appearance, adhering to Company dress code and PPE policies, • Willingness and ability to maintain stable performance under professional or personal pressure and/or opposition (e.g., time pressure and productivity measures). This job description in no way states or implies that these are the only duties to be performed by an employee occupying this position. Employees may be required to perform other related duties as assigned to ensure workload coverage. This job description does NOT constitute an employment agreement between the employer and employee and is subject to change by the employer as the organizational needs and requirements of the job change. #LI-EC1 This job description in no way states or implies that these are the only duties to be performed by an employee occupying this position. Employees may be required to perform other related duties as assigned to ensure workload coverage. This job description does NOT constitute an employment agreement between the employer and employee and is subject to change by the employer as the organizational needs and requirements of the job change. This position description is not all inclusive for every aspect of this role. Reasonable accommodations will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not, and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job’s essential duties because of an ADA disability. Other qualifications may be required to ensure employment eligibility in accordance with local laws, regulations and with Safelite Group, Inc. policies and practices. -- Internal Associates: Already a member of the Safelite team? Apply through your Workday account by searching "Find Open Jobs". Diversity: Safelite welcomes everyone. We value our diverse workforce and suppliers, and we’re proud to be an equal opportunity employer. Learn more at Careers Benefit amounts are estimates only. Actual values will depend on benefit elections during enrollment. This position description is not all inclusive for every aspect of this role. Reasonable accommodation will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job’s essential duties because of an ADA disability.

Job Description Hotel Equities, a multi-award-winning hotel development and hospitality management company, is currently searching for a remarkable Full-Time Maintenance Technician for the SpringHill Suites by Marriott Topeka Southwest in Topeka, KS. The pay rate for this position is $15.00 - $18.00 per hour, based on experience and qualifications. Essential Functions of Position • Will handle routine maintenance in public spaces, meeting rooms, back of the house spaces, pool, and grounds, • Maintains rooms in optimal operating condition by performing repairs as needed, • Understands the room preventative maintenance program, • Prepares preventative maintenance cart for use each day, • Repairs televisions, phones, clock radios, etc., • Replaces or repairs damaged bathroom fixtures and executes general plumbing as needed, • Maintains the overall appearance of the room; replaces broken mirrors, hangs fixtures, does touch up painting, etc., • Troubleshoots rooms heating/ventilating/air conditioning systems, • Uses both power and hand tools regularly in a safe, efficient manner, • Performs preventative maintenance throughout other areas of the hotel as well as, including both the front of the house, interior and exterior, • Maintains the condition of the hotel lobbies and restaurants Repairs furniture and decorations as necessary, • Repairs carpet and tile, • Repairs and maintains kitchen and laundry/housekeeping equipment Repairs/replaces windows and mirrors, • Maintains exterior of building and grounds as necessary, • Attends schools or seminars to remain current on proper techniques, • May be asked to perform routine pool operations, • Maintains operating equipment in working condition by performing routine equipment checks and repairs, • Maintains and assists in the cleanliness of individual work area, • Demonstrates familiarity with the hotel’s safety systems and takes corrective action on any maintenance or operating problems which affect the security or operating condition of the hotel, • Reports any hazards or injuries in the department and takes immediate action to correct, • Contributes to hotels preparedness during fire emergencies by participating in the hotel fire team, • Handles master keys in accordance with Company’s standards for the overall safety and security of the hotel, • Performing other duties as required to provide exceptional service to our guests, • Teamwork Skills, • Be an enthusiastic, helpful and positive member of the team, • Be professional, responsible and mature in conduct and behavior, • Be understanding of, encouraging to and friendly with all co-workers, • Be self-motivated and use time wisely, • Maintain open line of communications with each department, • Communicate pertinent information, • Respond positively to new ideas, • Openly accept critical/developmental feedback, • Maintain effective communication through the use of meetings, log books and bulletins, • Be available to help other departments in emergency situations, • Perform other assignments as directed by direct Supervisor, • Adhere to all work rules, procedures and policies established by the company including, but not limited to those contained in the associate handbook Safety and Security., • High school diploma; technical school degree preferred., • Must be able to speak, read, write and understand the primary language(s) used in the workplace., • Must be able to read and write to facilitate the communication process., • Must be self-directed. There is minimal direct supervision., • Requires good communication skills, both verbal and written., • Must possess basic computational ability., • Must have a good knowledge of plumbing and electrical systems, maintenance of records of power, water and fuel consumption.; knowledge of HVAC strongly preferred, • Must be able to stand 8 hours per day. Sitting and bending, squatting and other motion are required the rest of the working day. Length of time of these tasks may vary from day to day and task to task, • The worker is subject to noise: there is sufficient noise to cause the worker to shout in order to be heard above the surrounding noise level., • The worker is subject to vibration: exposure to oscillating movements of the extremities on whole body., • The worker is subject to hazards: including a variety of physical conditions, such as proximity to moving mechanical parts, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals., • The worker is subject to atmospheric conditions: one or more of the following conditions that affect the respiratory system or the skin: fumes, odors, dusts, mists, gases or poor ventilation., • The worker is subject to oils: there is air and/or skin exposure to oils and other cutting fluids., • Must be able to exert well-paced ability in limited space and to reach other locations of the hotel on a timely basis., • Must be able to bend, stoop, squat and stretch to fulfill cleaning tasks occasionally., • Must be able to lift up to 20 lbs on a regular and continuing basis., • Must be able to lift up to 50 lbs frequently., • Must be able to lift up to 100 lbs occasionally., • Position requires walking and standing most of the working day. Length of time of these tasks may vary from day to day and task to task., • Must be able to exert well-paced ability to reach other departments of the hotel on a timely basis., • Requires grasping, writing, standing, sitting, walking, repetitive motions, bending, climbing, listening and hearing ability and visual acuity., • Talking and hearing occur continuously in the process of communicating with guests, supervisors and subordinates, • Vision occurs continuously with the most common visual functions being those of near vision and depth perception., • Requires manual dexterity to use and operate all necessary equipment., • All associates must maintain a neat, clean and well-groomed appearance per Company Standards, • Regular attendance in conformance with the standards, which may be established from time to time, is essential to the successful performance of this position. Associates with irregular attendance will be subject to disciplinary action, up to and including termination of employment., • Due to the cyclical nature of the hospitality industry, associates may be required to work varying schedules to reflect the business needs of the hotel. In addition, attendance at all scheduled training sessions and meetings are required. What we can offer you: • Salary $15 to $18 an hour, • Health, vision and dental insurance, • 401(k), • Vacation, • Discount programs for shopping, travel, tickets and more., • Access to our Talent team to help you reach your career growth goals.

We want you to help us shape the future of shopping experiences and deliver on our purpose of connecting people with the products and experiences that enrich their lives. Joining Retail Odyssey, an Advantage Solutions company, means joining a network of 65,000 teammates serving 4,000+ brands and retail customers across 40+ countries. All the while, being provided the opportunities, support, and enrichment you need to grow your career. In this role, you will provide in-store merchandising support to Retailers to meet shoppers’ needs. This includes building displays and end caps, resetting shelves with product rotation, and tracking inventory to ensure that stores and suppliers maximize sales opportunities. This is a traveling position that requires regular travel as a primary requirement of the role. Travel roles may require various degrees of travel up to 50% or more of the time. Are you ready to shape the future of shopping and get it done with us? What we offer: • Competitive wages; $14.00 per hour, • Growth opportunities abound – We promote from within, • Paid travel with overnight stays, • No prior experience is required as we provide training and team support to help you succeed, • Additional hours may be available upon request, • We offer benefits that can be customized to meet your family’s needs, including medical, dental, vision, life insurance, supplemental voluntary plans, wellness programs, and access to discounts through Associate Perks Now, about you: • Are comfortable interacting with customers and management in a friendly, enthusiastic, and outgoing manner, • You’re 18 years or older, • Can perform physical work of moving, bending, standing and can lift up to 50 lbs., • Have reliable transportation to and from work location, • Demonstrate excellent customer service and interpersonal skills with our clients, customers and team members, • Interested in traveling within and outside of your home state, with overnight hotel stays, • Are a motivated self-starter with a strong bias for action and results, • Work independently, but also possess successful team building skills, • Have the ability to perform job duties with a safety-first mentality in a retail environment If this sounds like you, we can’t wait to learn more about you. Apply Now!

We want you to help us shape the future of shopping experiences and deliver on our purpose of connecting people with the products and experiences that enrich their lives. Joining Retail Odyssey, an Advantage Solutions company, means joining a network of 65,000 teammates serving 4,000+ brands and retail customers across 40+ countries. All the while, being provided the opportunities, support, and enrichment you need to grow your career. In this role, you will provide in-store merchandising support to Retailers to meet shoppers’ needs. This includes building displays and end caps, resetting shelves with product rotation, and tracking inventory to ensure that stores and suppliers maximize sales opportunities. This is a traveling position that requires regular travel as a primary requirement of the role. Travel roles may require various degrees of travel up to 50% or more of the time. Are you ready to shape the future of shopping and get it done with us? What we offer: • Competitive wages; $14.00 per hour, • Growth opportunities abound – We promote from within, • Paid travel with overnight stays, • No prior experience is required as we provide training and team support to help you succeed, • Additional hours may be available upon request, • We offer benefits that can be customized to meet your family’s needs, including medical, dental, vision, life insurance, supplemental voluntary plans, wellness programs, and access to discounts through Associate Perks Now, about you: • Are comfortable interacting with customers and management in a friendly, enthusiastic, and outgoing manner, • You’re 18 years or older, • Can perform physical work of moving, bending, standing and can lift up to 50 lbs., • Have reliable transportation to and from work location, • Demonstrate excellent customer service and interpersonal skills with our clients, customers and team members, • Interested in traveling within and outside of your home state, with overnight hotel stays, • Are a motivated self-starter with a strong bias for action and results, • Work independently, but also possess successful team building skills, • Have the ability to perform job duties with a safety-first mentality in a retail environment If this sounds like you, we can’t wait to learn more about you. Apply Now!

Job DescriptionØ Enhance overall safety, quality, and productivity in the Department area by eliminating defects, identifying, and executing loss saving initiatives, and building capability in the operating teams.Ø Own the Commissioning, Qualification and Verification (CQV) process for new projects. Act as single point of contact and key organizational leader between engineering and operations team to ensure full involvement during project execution and seamless transition during turnover to operations.Ø Drive high-performance work culture by engaging with team members on the floor and coaching to problem solve, make decisions, and become self-reliant.Ø Develop an expert level understanding of the manufacturing process, mechanics, instrumentation, and product specifications of your designated line/area; provide technical support to the line/area teams.Ø Coach operating teams and leadership to root cause identification and elimination of losses.Ø Address gaps in line/area performance through the implementation and effective coaching of company Continuous Improvement methodologies; foster a zero-loss culture.Ø Own a safety and/or quality key element.Ø Participate in training and qualification programs for designated line/area; participate in assessments, ensure effective training, and maintain consistent qualification standards.Ø Ensure data reliability for designated line/area in our Proficy plant applications software, including improving methods for collecting accurate data.Ø Organize and prioritize initiatives to help meet department master plan and plant long-term vision.Ø Help the organization stay current with applicable new technologies/ingredients. QUALIFICATIONS / REQUIREMNTSv Bachelor’s Degree in Engineeringv 2+ years of manufacturing/engineering experiencev Proven ability to learn technical processes and systems.v Demonstrated use of formal problem-solving methodologiesv A Chemical, Mechanical, or Electrical Engineering degreev Food manufacturing experiencev Project management skills and technical problem-solving capability E04JI800n8pv406aq52

Job Description QUALIFICATIONS: -Must hold OR be able to OBTAIN a current Kansas Certified Teacher License, OR Standard Substitute License OR Emergency Substitute Teacher License from KSDE. -Applicants must meet the Kansas State Department of Education certification requirements. -Knowledge and skills in proper English usage, grammar, vocabulary, spelling and punctuation, and basic math; methodologies, techniques and practices used to address the educational and emotional needs of regular program and special education students. -Must be able to follow oral and written directions and have the ability to establish effective working relationships with staff and students. Ability to maintain effective classroom management strategies. PERFORMANCE RESPONSIBILITIES: -Ability to implement lesson plans left by the classroom teacher while ensuring the integrity of academic time in a manner which motivates students to learn and participate. -Ability to create and maintain a climate of respect and fairness for all students; ability to demonstrate fair and ethical judgment. -Maintain discipline and classroom control that fosters a safe and positive environment for all students and staff in accordance with school and district policies. Ability to apply appropriate consequences for inappropriate student behaviors; ability to display problem solving cooperative negotiating skills and conflict resolution strategies. -Maintain and respect confidentiality of student, school personnel, and parent information. -Ensure adequate supervision to assure health, welfare, and safety of all students. -Take all necessary and reasonable precautions to protect students, equipment, materials, and facilities. -Perform other related duties as assigned by building administrator(s) in accordance with school/district policies and/or practices. We will continue to have Assigned Subs for the 2025-2026 school year. The Assigned Subs will report to a home building but be required to go to a TPS Strand (feeder school) when they are not needed in a classroom in the home building. Assigned subs are for CERTIFIED classroom teacher positions ONLY. These substitutes will have the following expectations as an Assigned Sub. * You are assigned to a “home” building. * If all certified absences in home building are filled, Substitutes please call the sub office for an assignment within your strand. * The sub office will find the placement and notify the school. * The sub works when school is in session and paid for the on site school days worked with scholars in a CERTIFIED position. * You MUST be willing to travel to other locations. * You MUST sign in at the location you work each day in order to be PAID. Company DescriptionWe are the largest school district in northeast Kansas. We have 13,000 students and 32 schools PreK-12. This is an in-person position.We are the largest school district in northeast Kansas. We have 13,000 students and 32 schools PreK-12. This is an in-person position.

Job Description Seeking Local CDL A Drivers | High Earning Potential! Job Details: • 💰 Competitive Pay - Pay Based on Commission Pay by the Load (NO 1099) - HIGH EARNING POTENTIAL!, • 🏡 HOME DAILY!, • 🚚 Late Model Manual & Automatic Peterbilts - Our equipment is kept in excellent condition!, • 👏 Class A Drivers - Most locations can be home daily, regional or weekly., • 🗓 Year Round Work, • 👉 Training Available to Operate, • 🚛 Bulk Freight Benefits: • Local, Regional and OTR Opportunities Available (Based on Location), • Day Cabs, Sleepers and Straight Trucks, • IVG ELD Devices, • Drivers Lounge, • Shop Onsite, • Insurance after 60 days for yourself, spouse and family, • 401K with Employer Contributions, • Vacation Pay, • Direct Deposit (Bi-Weekly), • Flexible Spending Account, • Dental & Vision, • Medical & Prescription Plan, • Secondary Insurance Requirements: • 22 years of age, • 1 year of Class A experience, • NO failed Drug/Alcohol in last 3 years, • No more than 1 major violation on drivers license in last 12 months, • No more then 2 minor violations in last 12 months, • Must pass DOT physical & drug screening, • Air brakes endorsement needed We currently have positions available for licensed drivers to join our company. The position entails the safe and timely transporting of different types of goods and materials from customer locations to manufacturing, distribution and retail centers. We are looking for a CDL driver who is self-motivated, has good communication skills and is able to work independently. You will work with dispatchers to plan routes and track deliveries. In addition, you must be able to read customer orders and follow safety regulations, as well as work under pressure. The trucking industry is constantly changing, and Pavlich, Inc. is committed to keeping our drivers, equipment, and overall operations up to date. The safety of our employees and customers is paramount to Pavlich, Inc. Pavlich, Inc is proud to be prominent and long-standing members of the following organizations. • The Kansas Motor Carriers Association (KMCA), • The Missouri Motor Carriers Association (MMCA), • The Missouri Dump Truck Association (MDTA)

Job Description Seeking Local CDL A Drivers | High Earning Potential! Job Details: • 💰 Competitive Pay - Pay Based on Commission Pay by the Load (NO 1099) - HIGH EARNING POTENTIAL!, • 🏡 HOME DAILY!, • 🚚 Late Model Manual & Automatic Peterbilts - Our equipment is kept in excellent condition!, • 👏 Class A Drivers - Most locations can be home daily, regional or weekly., • 🗓 Year Round Work, • 👉 Training Available to Operate, • 🚛 Bulk Freight Benefits: • Local, Regional and OTR Opportunities Available (Based on Location), • Day Cabs, Sleepers and Straight Trucks, • IVG ELD Devices, • Drivers Lounge, • Shop Onsite, • Insurance after 60 days for yourself, spouse and family, • 401K with Employer Contributions, • Vacation Pay, • Direct Deposit (Bi-Weekly), • Flexible Spending Account, • Dental & Vision, • Medical & Prescription Plan, • Secondary Insurance Requirements: • 22 years of age, • 1 year of Class A experience, • NO failed Drug/Alcohol in last 3 years, • No more than 1 major violation on drivers license in last 12 months, • No more then 2 minor violations in last 12 months, • Must pass DOT physical & drug screening, • Air brakes endorsement needed We currently have positions available for licensed drivers to join our company. The position entails the safe and timely transporting of different types of goods and materials from customer locations to manufacturing, distribution and retail centers. We are looking for a CDL driver who is self-motivated, has good communication skills and is able to work independently. You will work with dispatchers to plan routes and track deliveries. In addition, you must be able to read customer orders and follow safety regulations, as well as work under pressure. The trucking industry is constantly changing, and Pavlich, Inc. is committed to keeping our drivers, equipment, and overall operations up to date. The safety of our employees and customers is paramount to Pavlich, Inc. Pavlich, Inc is proud to be prominent and long-standing members of the following organizations. • The Kansas Motor Carriers Association (KMCA), • The Missouri Motor Carriers Association (MMCA), • The Missouri Dump Truck Association (MDTA)

Job Description About Company: At HMG Healthcare, our mission is simple: Take Care of People. Guided by our core values of Integrity, Teamwork, Innovation, Education, Quality Outcomes, and Fiscal Responsibility, we are building a quality post-acute healthcare system that supports patients, families, and communities. We provide a full continuum of services—including Skilled Nursing, Rehabilitation, Memory Care, Pulmonary Care, Assisted Living, and Independent Living—with a focus on exceptional outcomes and quality of life. Every day, our 3,500+ residents and patients are entrusted to a dedicated team of professionals and caregivers. With operations across Texas and Kansas, HMG Healthcare offers diverse career opportunities to grow your skills, serve others, and be part of a supportive, mission-driven culture. We are proud to support our team with competitive pay and a comprehensive benefits package, including paid time off, medical and dental insurance, early wage access, tuition reimbursement, career growth through HMGU, and a 401(k) retirement plan. Join us and be part of a team where Taking Care of People is more than our mission—it’s our culture! Full-time About the Role: As a Licensed Vocational Nurse (LVN) at Tanglewood Nursing & Rehabilitation, you will play a critical role in delivering compassionate and high-quality nursing care to our residents. Your primary focus will be to support the health and well-being of patients by administering medications, monitoring vital signs, and assisting with daily living activities under the supervision of registered nurses and physicians. You will collaborate closely with interdisciplinary teams to develop and implement individualized care plans that promote recovery and comfort. This role requires a strong commitment to patient advocacy, ensuring that each resident's needs and preferences are respected and met with dignity. Ultimately, your contributions will directly impact the quality of life and health outcomes of the individuals entrusted to our care. Minimum Qualifications: • Current and valid Licensed Vocational Nurse (LVN) license in the state of Kansas., • Completion of an accredited vocational nursing program., • Basic Life Support (BLS) certification., • Demonstrated ability to perform nursing duties in a long-term care or rehabilitation setting., • Experience working in a nursing home or rehabilitation facility., • Familiarity with electronic health record (EHR) systems., • Training in geriatric nursing or chronic disease management., • Provide direct nursing care to residents, including administering medications and treatments as prescribed., • Monitor and record vital signs, symptoms, and changes in patient conditions, reporting significant findings to the healthcare team., • Assist residents with activities of daily living such as bathing, dressing, and mobility support., • Collaborate with registered nurses, physicians, and other healthcare professionals to develop and update individualized care plans., • Maintain accurate and detailed patient records in compliance with facility policies and regulatory requirements., • Educate residents and their families on health maintenance and disease prevention strategies. The required skills enable the LVN to provide safe and effective nursing care by accurately administering medications, monitoring patient status, and documenting clinical information. Strong communication skills are essential for coordinating with healthcare team members and educating residents and their families. Preferred skills such as proficiency with electronic health records streamline documentation and improve care coordination. Additional certifications enhance the nurse's ability to manage specialized treatments like IV therapy and wound care, contributing to better patient outcomes. Multilingual abilities facilitate culturally sensitive care and improve resident comfort and understanding. #INDWM (6a-6p)(6p-6a)

Job Description Automotive Detailer Job Summary The Automotive Detailer is responsible for cleaning, restoring, and enhancing the appearance of new and pre-owned vehicles in line with customer specifications and company quality standards. Compensation Commission Only ($150-$200 earned per day on average) Schedule Full-Time and Part-Time positions available Benefits • Medical, Dental, and Vision Insurance, • Paid Time Off (PTO) & Sick Time, • Clean and detail vehicle exteriors and interiors, including washing, vacuuming, window cleaning, and surface treatments, • Apply wax, polish, and protective coatings to enhance vehicle appearance, • Clean upholstery, carpets, leather, vinyl, and other interior surfaces using appropriate products, • Perform engine and engine compartment cleaning, • Inspect vehicles for defects and report any concerns to management, • Apply dressings to tires and wheel wells, • Accurately process work using the SERV Order System, • Understand and deliver services according to customer requirements, • Maintain a safe, clean, and organized work environment, • Follow all safety procedures, including proper use of personal protective equipment (PPE), • Collaborate with team members to ensure efficient workflow, • Valid driver's license in good standing (required), • 6+ months of automotive detailing experience preferred, but not required (training provided), • Strong attention to detail and commitment to quality, • Ability to work in a fast-paced environment and manage multiple tasks We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionGetlabs is the leading platform for at-home diagnostics. Healthcare organizations use Getlabs to send mobile phlebotomists to patients’ homes and collect labs, vitals, and advanced diagnostics. By leveraging Getlabs, partners can improve patient adherence and close gaps in care with same-day, nationwide availability. Our team has raised $50M from strategic investors including the two largest diagnostic laboratories in the United States, Labcorp and Quest. Getlabs’ mission is to save lives by expanding access to diagnostics for everyone. About the role:We are currently seeking a PRN Mobile Phlebotomist interested in joining a high-growth stage startup with strong experience in working in hospitals, in office, or mobile environments. Candidates must maintain a high standard of excellence with minimal supervision. Above all, we are seeking candidates who are friendly, empathetic, compassionate, and genuinely care about patients. Although we provide mobile phlebotomy, we see ourselves as a patient experience company first and foremost. For that reason, we believe the quality of our specialists is the secret sauce for Getlabs. Every interaction with patients is an opportunity to deliver a thoughtful and amazing experience.At Getlabs, you will: • Visit patients in their home or office, drive to and from appointments (in your own vehicle), process specimens with a centrifuge that plugs into your car, drop samples off at patient service centers or laboratories, • Follow safe and accurate blood collection procedures and processing of specimens, with a high degree of accuracy, • Ability to adapt in a rapid high-growth environment, • Maintain close communication with the operations and patient experience team during business hours, • As PRN, you will confirm your availability to your leader every Friday for the week ahead or weeks ahead, if possible), • Based on the availability that you have submitted, your leader will either schedule you in advance or call you as needed for shifts that fall within your availability, • As a PRN, the expectation is that you are available a minimum of three (3) days a week during the hours of 5am-1pm ("Expected Shifts") between Monday and Friday. You are eligible to work up to 29 hours a week but are not guaranteed any hours in a PRN roleWhat we are looking for:, • Phlebotomy certification from an accredited agency, • 1 year of phlebotomy experience (mobile phlebotomy experience preferred), • Experience processing samples, • Certification from a national agency such as American Medical Technologists (AMT), American Society for Clinical Pathology (ASCP), or National Center for Competency Testing (NCCT), • Proven track record in providing exceptional customer service, • Strong communication skills; both written and verbal, • Ability to work independently or in a team environment under minimal supervision, • Reliable transportation and clean driving record, • Bonus Qualifications: Fluent in SpanishWe have great benefits to make your life easier so you can focus on what you're best at:, • W2 employment at $19.50/hr, • Flexible schedule, • Mileage reimbursement

Job Description Capital City Nissan of Topeka – Flat Rate Automotive TechnicianPosition Overview Flat Rate Technicians at Capital City Nissan of Topeka perform vehicle maintenance, diagnostics, and repairs with a focus on efficiency, quality, and customer safety. This role requires consistent productivity, attention to detail, and strong communication with the service team. Technicians work in a flat-rate environment and are supported through clear career pathing, ongoing manufacturer and ASE training, and annual performance reviews. Our facility offers a modern, well-equipped, and team-oriented environment for professionals looking to advance their careers. Key Results Areas (KRAs)KRA #1: Flat Rate Production & Proficiency Consistently meet or exceed proficiency targets and maximize available hours. Critical Tasks: * Flag flat-rate hours accurately and consistently. * Maintain 100% or higher proficiency (flagged vs. worked hours). * Complete repairs within industry-standard timeframes. * Communicate parts' needs or time variances proactively. * Prioritize work efficiently based on dispatch and shop load. KRA #2: Repair Accuracy & First-Time Fix Deliver safe, accurate repairs and minimize comebacks. Critical Tasks: * Perform advanced diagnostics, maintenance, and repairs across vehicle systems. * Adhere strictly to OEM repair procedures and documentation standards. * Complete accurate, and detailed technician stories on every RO. * Participate in quality checks or test drives as necessary. * Maintain a low warranty comeback and rework rate. KRA #3: Training & Certification Advance your technical skills and certifications through a structured development plan. Critical Tasks: * Complete Nissan technician training modules as assigned. * Obtain and maintain ASE certifications (costs covered by dealership). * Participate in in-house and external training events. * Engage in annual career path reviews and goal-setting. KRA #4: Shop Safety & Team Communication Maintain a clean, safe work area and contribute to overall shop productivity. Critical Tasks: * Keep assigned bay and shared spaces organized and compliant with safety guidelines. * Collaborate effectively with advisors, parts staff, and fellow technicians. * Follow all dealership safety protocols and equipment usage standards. * Assist teammates when volume or repairs require extra support. Compensation & Schedule * Flat Rate Pay Range: $26.00 – $44.71 per hour (Pay is based on our technician career path, which is reviewed and updated annually.) * Typical Hours Available: 40–50 per week (dependent on performance and shop volume) * Performance Targets: 100%+ proficiency expected * Bonuses & Spiffs: Available based on volume, comeback prevention, and training milestones Benefits * 90% Employer-Paid Health Insurance * Paid ASE Certification & Training * Nissan Factory Training & Certification Access * Paid Time Off (6 PTO Days) * Paid Major Holidays * 401(k) with Company Match * Uniforms Provided * Access to Special Tools & Digital Repair Resources * Employee Discount on Parts & Service Minimum Requirements * Minimum 1 year of flat-rate or professional automotive repair experience * Valid driver’s license and clean driving record * Personal tools and storage required (advanced tools provided) * Ability to lift 50 lbs and meet the physical demands of the position * High school diploma or equivalent required * Nissan or ASE certifications preferred (not required at hire) Career Path & Growth Capital City Nissan of Topeka offers a structured technician career path, reviewed annually. Technicians may advance into roles such as: * Senior Flat Rate Technician * Nissan Certified Technician * ASE Master Technician * Team Lead or Shop Foreman Training is dealership-supported and tied directly to performance and certification milestones. Capital City Nissan of Topeka is an equal opportunity employer. We support technician development at every level.