Select jobs in Buffalo, New YorkCreate job alerts

• PAY THAT KEEPS GROWING - Earn up to $96,000/yr + scheduled raises built in*, • GREAT HOME TIME OPTIONS - Home as often as weekly, • STRONG START TO HIT THE ROAD - Sign on bonus available We know being a driver is tough. That's why Transco Lines makes sure you not only get great pay, but also the home time to help you enjoy it. You'll always get the utmost respect, appreciation, and support - that's been the Transco standard since 1984. Based in Russellville, AR with a full-service maintenance terminal in North Little Rock, Transco operates 470+ power units and 1,300 dry van trailers. The fleet is built around ultra-modern assets, JIT-focused freight, and a culture that recognizes and celebrates its drivers. Pets welcome. An open-door policy that goes all the way to the President. That's Team TLI. • Strong pay with raises built in. Solo drivers earn up to $90,000 per year, with Hazmat-endorsed drivers earning up to $96,000 per year. Base CPM ranges from 63-73CPM based on experience - and a guaranteed raise at your 1-year anniversary means your pay keeps growing the longer you stay.*, • Home time options that fit your life. Transco offers multiple home time schedules, including home weekly or a 12-days-out / 3-days-home rotation. Real options, not guesswork., • Modern trucks. Barely broken in. Transco's fleet averages just 1 year and 2 months old - ultra-modern equipment backed by full-service maintenance., • Freight that flows. Haul 100% no-touch and 50% drop & hook freight, cutting dock time and keeping your week productive. Freight type varies by position., • A bonus to start strong. Sign-on bonuses available for qualified solo drivers.* Talk with a recruiter to confirm current availability by position., • A culture that celebrates drivers. Transco recognizes driver achievement through company-wide nominations and regular shoutouts - because strong performance deserves more than a paycheck., • Pet-friendly policy. Your four-legged co-pilot is welcome on the road with you., • Driver referral program. Know a great driver? Refer them and pocket extra cash when they come aboard., • Lease purchase available. Zero down, no credit check, with terms designed to protect your cash flow., • Open door all the way up. Transco's open-door policy means you can walk into any terminal, any office - even talk to the President. That's not marketing speak. That's the culture. All pay and bonus amounts may vary by job type, location, experience level, and performance and are subject to change based on company discretion. Talk with a recruiter to confirm specific details. There is no deadline to apply. Applications are accepted on an ongoing basis. • Valid CDL A license, • Minimum of 6 months of verifiable OTR tractor-trailer experience, • Hazmat and Doubles endorsement required for select positions; preferred for all, • Must meet DOT and Transco Lines requirements

Job Description Van Hook Service Company Inc. was founded in 1973 and currently services thousands of locations throughout New York and Pennsylvania. A great opportunity at a growing company! We have multiple positions available, we offer the highest pay scale based on experience, full benefits at no cost to the employee, large 401k contributions, overtime opportunities available, you will not find better benefits anywhere in the HVAC/R industry. A fully equipped service truck, training, cell phone, all tools and support needed to get the job done are provided by the company. Come work at a company that values its employees and provides the highest level of service to its customers through integrity, excellence, innovation and professionalism. HVAC/R Technician Job Description We are looking to hire a detail-oriented HVAC technician to install, maintain and repair HVAC/R systems. The HVAC technician will be skilled in cleaning, adjusting and repairing systems. You will guide and advise the customer to select the most appropriate air quality system to fulfill their requirements. You will be responsible for air quality systems from installation to end-of-life by performing maintenance, warranty, and emergency repairs. To be successful in this role, customer satisfaction, safety and communication should be your top priority. Ideal candidates will be patient and have excellent organizational and troubleshooting skills. HVAC Technician Responsibilities: • Installing, maintaining, and repairing ventilation and air conditioning systems and equipment., • Diagnosing electrical and mechanical faults for HVAC/R systems., • Cleaning, adjusting, and repairing systems, and performing warranty services., • Performing emergency repairs promptly and efficiently., • Keeping daily logs and records of all maintenance functions., • Complying with service standards, work instructions and customers' requirements., • Assisting with customers' queries. HVAC Technician Requirements: • High school diploma, GED or suitable equivalent., • 2+ year experience as an HVAC/R technician, and willingness to continue education in HVAC field., • Valid driver’s license., • Understanding principles of air conditioning, refrigeration, and heating., • Excellent written, verbal, and interpersonal skills., • Ability to work after hours when scheduled. Work Remotely • No Job Type: Full-time Benefits: • 401(k), • Dental insurance, • Health insurance, • Health savings account, • Paid time off, • Parental leave, • Professional development assistance, • Referral program, • Retirement plan, • Tuition reimbursement, • Vision insurance Schedule: • 8 hour shift, • On call, • Overtime Education: • High school or equivalent (Required) Experience: • HVAC: 2 years of field experience or equivalent License/Certification: • Driver's License (Required), • EPA Certification (Preferred), • OSHA 10 (Preferred) Work Location: Multiple locations Company DescriptionVan Hook Service Co. is a leader in the commercial HVAC/R industry, known for top-tier pay, excellent benefits, and long-term career opportunities. As a third-generation, family-owned business established in 1973, we proudly serve all of New York State and Northern Pennsylvania. Our team services all types of HVAC/R equipment and control systems and has the expertise to complete a wide range of construction projects from start to finishVan Hook Service Co. is a leader in the commercial HVAC/R industry, known for top-tier pay, excellent benefits, and long-term career opportunities. As a third-generation, family-owned business established in 1973, we proudly serve all of New York State and Northern Pennsylvania. Our team services all types of HVAC/R equipment and control systems and has the expertise to complete a wide range of construction projects from start to finish

Why Deliver with DoorDash? DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day. As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you. Being a Dasher with DoorDash gives you the flexibility to earn extra cash on your terms. • Multiple ways to earn:Whether you’re delivering meals, groceries, or retail orders, DoorDash offers diverse earning opportunities so you can maximize your time., • Total flexibility:Dash when it works for you. Set your own hours and work as much—or as little—as you want., • Know how much you'll make:Clear and concise pay model lets you know the minimum amount you will make before accepting any offer., • Instant cash flow:Get paid the same day you dash with DoorDash Crimson*. No deposit fees, no waiting., • Quick and easy start:Sign up in minutes and get on the road fast., • Simple Process:Just pick up, drop off, and cash out. Payday is in your back pocket. Basic Requirements • 18+ years old* (21+ to deliver alcohol), • Any car, scooter, or bicycle (in select cities), • Driver's license number, • Social security number (only in the US), • Consistent access to a smartphone How to Sign Up • Click “Sign Up Now” and complete the sign up process, • Download the DoorDash Dasher app and go *Subject to eligibility requirements and successful ID verification. The DoorDash Crimson Deposit Account is established by Starion Bank, Member FDIC. The DoorDash Crimson Visa® Debit Card is issued by Starion Bank. **Subject to eligibility.. *Must be 19+ in Arizona, California, Colorado, Delaware, Florida, Georgia, Idaho, Kentucky, Montana, New Jersey, New Mexico, Texas, Utah, and West Virginia Additional information Dashing with DoorDash is a great earnings opportunity for anyone looking for part-time, seasonal, flexible, weekend, after-school, temporary, steady delivery gig. Deliver with DoorDash and earn extra cash while being your own boss. Dash when it works for you. Sign up today.

Why Deliver with DoorDash? DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day. As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you. Being a Dasher with DoorDash gives you the flexibility to earn extra cash on your terms. • Multiple ways to earn:Whether you’re delivering meals, groceries, or retail orders, DoorDash offers diverse earning opportunities so you can maximize your time., • Total flexibility:Dash when it works for you. Set your own hours and work as much—or as little—as you want., • Know how much you'll make:Clear and concise pay model lets you know the minimum amount you will make before accepting any offer., • Instant cash flow:Get paid the same day you dash with DoorDash Crimson*. No deposit fees, no waiting., • Quick and easy start:Sign up in minutes and get on the road fast., • Simple Process:Just pick up, drop off, and cash out. Payday is in your back pocket. Basic Requirements • 18+ years old* (21+ to deliver alcohol), • Any car, scooter, or bicycle (in select cities), • Driver's license number, • Social security number (only in the US), • Consistent access to a smartphone How to Sign Up • Click “Sign Up Now” and complete the sign up process, • Download the DoorDash Dasher app and go *Subject to eligibility requirements and successful ID verification. The DoorDash Crimson Deposit Account is established by Starion Bank, Member FDIC. The DoorDash Crimson Visa® Debit Card is issued by Starion Bank. **Subject to eligibility.. *Must be 19+ in Arizona, California, Colorado, Delaware, Florida, Georgia, Idaho, Kentucky, Montana, New Jersey, New Mexico, Texas, Utah, and West Virginia Additional information Dashing with DoorDash is a great earnings opportunity for anyone looking for part-time, seasonal, flexible, weekend, after-school, temporary, steady delivery gig. Deliver with DoorDash and earn extra cash while being your own boss. Dash when it works for you. Sign up today.

Why Deliver with DoorDash? DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day. As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you. Being a Dasher with DoorDash gives you the flexibility to earn extra cash on your terms. • Multiple ways to earn:Whether you’re delivering meals, groceries, or retail orders, DoorDash offers diverse earning opportunities so you can maximize your time., • Total flexibility:Dash when it works for you. Set your own hours and work as much—or as little—as you want., • Know how much you'll make:Clear and concise pay model lets you know the minimum amount you will make before accepting any offer., • Instant cash flow:Get paid the same day you dash with DoorDash Crimson*. No deposit fees, no waiting., • Quick and easy start:Sign up in minutes and get on the road fast., • Simple Process:Just pick up, drop off, and cash out. Payday is in your back pocket. Basic Requirements • 18+ years old* (21+ to deliver alcohol), • Any car, scooter, or bicycle (in select cities), • Driver's license number, • Social security number (only in the US), • Consistent access to a smartphone How to Sign Up • Click “Sign Up Now” and complete the sign up process, • Download the DoorDash Dasher app and go *Subject to eligibility requirements and successful ID verification. The DoorDash Crimson Deposit Account is established by Starion Bank, Member FDIC. The DoorDash Crimson Visa® Debit Card is issued by Starion Bank. **Subject to eligibility.. *Must be 19+ in Arizona, California, Colorado, Delaware, Florida, Georgia, Idaho, Kentucky, Montana, New Jersey, New Mexico, Texas, Utah, and West Virginia Additional information Dashing with DoorDash is a great earnings opportunity for anyone looking for part-time, seasonal, flexible, weekend, after-school, temporary, steady delivery gig. Deliver with DoorDash and earn extra cash while being your own boss. Dash when it works for you. Sign up today.

Why Deliver with DoorDash? DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day. As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you. Being a Dasher with DoorDash gives you the flexibility to earn extra cash on your terms. • Multiple ways to earn:Whether you’re delivering meals, groceries, or retail orders, DoorDash offers diverse earning opportunities so you can maximize your time., • Total flexibility:Dash when it works for you. Set your own hours and work as much—or as little—as you want., • Know how much you'll make:Clear and concise pay model lets you know the minimum amount you will make before accepting any offer., • Instant cash flow:Get paid the same day you dash with DoorDash Crimson*. No deposit fees, no waiting., • Quick and easy start:Sign up in minutes and get on the road fast., • Simple Process:Just pick up, drop off, and cash out. Payday is in your back pocket. Basic Requirements • 18+ years old* (21+ to deliver alcohol), • Any car, scooter, or bicycle (in select cities), • Driver's license number, • Social security number (only in the US), • Consistent access to a smartphone How to Sign Up • Click “Sign Up Now” and complete the sign up process, • Download the DoorDash Dasher app and go *Subject to eligibility requirements and successful ID verification. The DoorDash Crimson Deposit Account is established by Starion Bank, Member FDIC. The DoorDash Crimson Visa® Debit Card is issued by Starion Bank. **Subject to eligibility.. *Must be 19+ in Arizona, California, Colorado, Delaware, Florida, Georgia, Idaho, Kentucky, Montana, New Jersey, New Mexico, Texas, Utah, and West Virginia Additional information Dashing with DoorDash is a great earnings opportunity for anyone looking for part-time, seasonal, flexible, weekend, after-school, temporary, steady delivery gig. Deliver with DoorDash and earn extra cash while being your own boss. Dash when it works for you. Sign up today.

Why Deliver with DoorDash? DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day. As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you. Being a Dasher with DoorDash gives you the flexibility to earn extra cash on your terms. • Multiple ways to earn:Whether you’re delivering meals, groceries, or retail orders, DoorDash offers diverse earning opportunities so you can maximize your time., • Total flexibility:Dash when it works for you. Set your own hours and work as much—or as little—as you want., • Know how much you'll make:Clear and concise pay model lets you know the minimum amount you will make before accepting any offer., • Instant cash flow:Get paid the same day you dash with DoorDash Crimson*. No deposit fees, no waiting., • Quick and easy start:Sign up in minutes and get on the road fast., • Simple Process:Just pick up, drop off, and cash out. Payday is in your back pocket. Basic Requirements • 18+ years old* (21+ to deliver alcohol), • Any car, scooter, or bicycle (in select cities), • Driver's license number, • Social security number (only in the US), • Consistent access to a smartphone How to Sign Up • Click “Sign Up Now” and complete the sign up process, • Download the DoorDash Dasher app and go *Subject to eligibility requirements and successful ID verification. The DoorDash Crimson Deposit Account is established by Starion Bank, Member FDIC. The DoorDash Crimson Visa® Debit Card is issued by Starion Bank. **Subject to eligibility.. *Must be 19+ in Arizona, California, Colorado, Delaware, Florida, Georgia, Idaho, Kentucky, Montana, New Jersey, New Mexico, Texas, Utah, and West Virginia Additional information Dashing with DoorDash is a great earnings opportunity for anyone looking for part-time, seasonal, flexible, weekend, after-school, temporary, steady delivery gig. Deliver with DoorDash and earn extra cash while being your own boss. Dash when it works for you. Sign up today.

Why Deliver with DoorDash? DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day. As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you. Being a Dasher with DoorDash gives you the flexibility to earn extra cash on your terms. • Multiple ways to earn:Whether you’re delivering meals, groceries, or retail orders, DoorDash offers diverse earning opportunities so you can maximize your time., • Total flexibility:Dash when it works for you. Set your own hours and work as much—or as little—as you want., • Know how much you'll make:Clear and concise pay model lets you know the minimum amount you will make before accepting any offer., • Instant cash flow:Get paid the same day you dash with DoorDash Crimson*. No deposit fees, no waiting., • Quick and easy start:Sign up in minutes and get on the road fast., • Simple Process:Just pick up, drop off, and cash out. Payday is in your back pocket. Basic Requirements • 18+ years old* (21+ to deliver alcohol), • Any car, scooter, or bicycle (in select cities), • Driver's license number, • Social security number (only in the US), • Consistent access to a smartphone How to Sign Up • Click “Sign Up Now” and complete the sign up process, • Download the DoorDash Dasher app and go *Subject to eligibility requirements and successful ID verification. The DoorDash Crimson Deposit Account is established by Starion Bank, Member FDIC. The DoorDash Crimson Visa® Debit Card is issued by Starion Bank. **Subject to eligibility.. *Must be 19+ in Arizona, California, Colorado, Delaware, Florida, Georgia, Idaho, Kentucky, Montana, New Jersey, New Mexico, Texas, Utah, and West Virginia Additional information Dashing with DoorDash is a great earnings opportunity for anyone looking for part-time, seasonal, flexible, weekend, after-school, temporary, steady delivery gig. Deliver with DoorDash and earn extra cash while being your own boss. Dash when it works for you. Sign up today.

Why Deliver with DoorDash? DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day. As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you. Being a Dasher with DoorDash gives you the flexibility to earn extra cash on your terms. • Multiple ways to earn:Whether you’re delivering meals, groceries, or retail orders, DoorDash offers diverse earning opportunities so you can maximize your time., • Total flexibility:Dash when it works for you. Set your own hours and work as much—or as little—as you want., • Know how much you'll make:Clear and concise pay model lets you know the minimum amount you will make before accepting any offer., • Instant cash flow:Get paid the same day you dash with DoorDash Crimson*. No deposit fees, no waiting., • Quick and easy start:Sign up in minutes and get on the road fast., • Simple Process:Just pick up, drop off, and cash out. Payday is in your back pocket. Basic Requirements • 18+ years old* (21+ to deliver alcohol), • Any car, scooter, or bicycle (in select cities), • Driver's license number, • Social security number (only in the US), • Consistent access to a smartphone How to Sign Up • Click “Sign Up Now” and complete the sign up process, • Download the DoorDash Dasher app and go *Subject to eligibility requirements and successful ID verification. The DoorDash Crimson Deposit Account is established by Starion Bank, Member FDIC. The DoorDash Crimson Visa® Debit Card is issued by Starion Bank. **Subject to eligibility.. *Must be 19+ in Arizona, California, Colorado, Delaware, Florida, Georgia, Idaho, Kentucky, Montana, New Jersey, New Mexico, Texas, Utah, and West Virginia Additional information Dashing with DoorDash is a great earnings opportunity for anyone looking for part-time, seasonal, flexible, weekend, after-school, temporary, steady delivery gig. Deliver with DoorDash and earn extra cash while being your own boss. Dash when it works for you. Sign up today.

Why Deliver with DoorDash? DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day. As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you. Being a Dasher with DoorDash gives you the flexibility to earn extra cash on your terms. • Multiple ways to earn:Whether you’re delivering meals, groceries, or retail orders, DoorDash offers diverse earning opportunities so you can maximize your time., • Total flexibility:Dash when it works for you. Set your own hours and work as much—or as little—as you want., • Know how much you'll make:Clear and concise pay model lets you know the minimum amount you will make before accepting any offer., • Instant cash flow:Get paid the same day you dash with DoorDash Crimson*. No deposit fees, no waiting., • Quick and easy start:Sign up in minutes and get on the road fast., • Simple Process:Just pick up, drop off, and cash out. Payday is in your back pocket. Basic Requirements • 18+ years old* (21+ to deliver alcohol), • Any car, scooter, or bicycle (in select cities), • Driver's license number, • Social security number (only in the US), • Consistent access to a smartphone How to Sign Up • Click “Sign Up Now” and complete the sign up process, • Download the DoorDash Dasher app and go *Subject to eligibility requirements and successful ID verification. The DoorDash Crimson Deposit Account is established by Starion Bank, Member FDIC. The DoorDash Crimson Visa® Debit Card is issued by Starion Bank. **Subject to eligibility.. *Must be 19+ in Arizona, California, Colorado, Delaware, Florida, Georgia, Idaho, Kentucky, Montana, New Jersey, New Mexico, Texas, Utah, and West Virginia Additional information Dashing with DoorDash is a great earnings opportunity for anyone looking for part-time, seasonal, flexible, weekend, after-school, temporary, steady delivery gig. Deliver with DoorDash and earn extra cash while being your own boss. Dash when it works for you. Sign up today.

Why Deliver with DoorDash? DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day. As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you. Being a Dasher with DoorDash gives you the flexibility to earn extra cash on your terms. • Multiple ways to earn:Whether you’re delivering meals, groceries, or retail orders, DoorDash offers diverse earning opportunities so you can maximize your time., • Total flexibility:Dash when it works for you. Set your own hours and work as much—or as little—as you want., • Know how much you'll make:Clear and concise pay model lets you know the minimum amount you will make before accepting any offer., • Instant cash flow:Get paid the same day you dash with DoorDash Crimson*. No deposit fees, no waiting., • Quick and easy start:Sign up in minutes and get on the road fast., • Simple Process:Just pick up, drop off, and cash out. Payday is in your back pocket. Basic Requirements • 18+ years old* (21+ to deliver alcohol), • Any car, scooter, or bicycle (in select cities), • Driver's license number, • Social security number (only in the US), • Consistent access to a smartphone How to Sign Up • Click “Sign Up Now” and complete the sign up process, • Download the DoorDash Dasher app and go *Subject to eligibility requirements and successful ID verification. The DoorDash Crimson Deposit Account is established by Starion Bank, Member FDIC. The DoorDash Crimson Visa® Debit Card is issued by Starion Bank. **Subject to eligibility.. *Must be 19+ in Arizona, California, Colorado, Delaware, Florida, Georgia, Idaho, Kentucky, Montana, New Jersey, New Mexico, Texas, Utah, and West Virginia Additional information Dashing with DoorDash is a great earnings opportunity for anyone looking for part-time, seasonal, flexible, weekend, after-school, temporary, steady delivery gig. Deliver with DoorDash and earn extra cash while being your own boss. Dash when it works for you. Sign up today.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: Electronics Assembler II - 2nd Shift Work Schedule: Onsite - Buffalo, NY Our team in Military Aircraft Group is looking for an Electronics Assembler II to join them. You will report to the Performance Leader and will have an onsite, 2nd shift work schedule in Elma, New York. To be considered for Electronics Assembler II, here's what you'll need to bring with you: • High School diploma or GED preferred. Otherwise, demonstrated ability to understand and apply all verbal, written and computer work instructions or training in English, and demonstrated ability to perform simple addition, subtraction, multiplication and division., • At least 3 years related electrical assembly and soldering experience., • Follow strict Federal Aviation Agency (F.A.A.) regulations regarding Safety Sensitive Work (S.S.W.), employee enrollment and participation in the company's "F.A.A. Drug & Alcohol Program" is a requirement for this position. As an Electronics Assembler II, you will: • Assemble high reliability chassis and final assemblies using circuit cards, stand offs, wire harnesses, solder and crimping, electrical and mechanical instruments. Complete inspections and Foreign Object Debris (FOD) checks., • Perform high reliability soldering and crimping operations on complex sub-assemblies, electronic, and mechanical assemblies, repair of circuit boards, jumper wires, and wire harnesses., • Solder/crimp wires and jumpers to multiple pin connectors/assemblies to meet government/customer inspection and specification., • Decipher assembly drawings Bill of Material (B.O.M) and work with electronic work instructions., • Know and follow applicable Electro-Static Discharge (ESD) procedures; understand high reliability soldering specifications and meet certification requirements as applicable., • Be familiar with several different cleaning procedures, different potting compounds, and paints., • Use a variety of tools such as regular hand tools, dial torque wrenches, auto torque drivers, crimpers, fixtures, digital calipers, solder iron, hot tweezers, heat gun, microscope, and high-resolution equipment., • Clean and maintain work areas and equipment including tools, keeping area clean from FOD. How We Care for You: • Financial Rewards: great compensation package, bonus opportunities, matching 401k, and the ability to participate in Employee Stock Purchase Plan (select locations), Flexible Spending and Health Savings Accounts, • Work/Life Balance: Flexible paid time off, holidays and parental leave program, relocation assistance., • Health & Welfare: Comprehensive insurance coverage including medical, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages., • Professional Skills Development: Tuition Assistance, mentorship and coaching opportunities, leadership development and other personal growth programs, • Culture: Warm, respectful, family-like environment driven by our 12 core values. Multiple Employee Resource Groups led by our employees, open and welcoming to all., • 2nd Shift employees receive 10% shift differential Salary Range Transparency: Buffalo, NY $25.00-$32.00 Hourly Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787. No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Absent compliance with these pre-conditions resumes submitted directly to any Moog Inc. employee or affiliate will not qualify for fee payment, and therefore become the property of Moog Inc.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: Sr. Planner Reporting To: Planning Process Manager, Program Work Schedule: Hybrid - Buffalo, NY Moog, Inc. is a global leader in motion control across land, sea air and space, pioneering advanced solutions to drive cutting edge innovation for our valued customers. Our Space and Defense Group is the operating group with the longest heritage at Moog and serves ever-evolving markets with ongoing innovation that allows for constantly developing technology and excellent career opportunities. Our Space division in East Aurora, NY is looking for a Sr. Planner to join our dynamic team! This Sr. Planner has primary scheduling responsibility for multiple areas of the business, including but not limited to Assembly & Test development. This person can expect to perform a blend of strategic and tactical planning functions, including maintaining advanced planning parameters for components and negotiating with various programs to optimize schedule. This person will be responsible for communication and maintaining relationships with the shop planning and procurement teams for status updates on components gating kit releases. Risk assessments, complex data analyses, and tactical leadership are also core functions of the role, while managing multiple priorities to meet business deadlines. As our Sr. Planner, you will make critical contributions by holding responsibility for: • Acting as a leader within the organization representing supply chain, • Creating schedules, including manual schedules for development, • Mitigating risk to schedule slips, • Performing trend analysis, • Releasing work orders, • Providing completion dates, • Perform basic forecasting with assistance from master planning, • Providing management report-outs with effective communication, • Participate in higher-level problem-solving initiatives cross-functionally, • Participate in or lead continuous improvement activities for the function or business unit To be considered for the Sr. Planner role, you will need to bring with you: • A Bachelor's degree in Business, Analytics, or a related field, and 2 years planning experience ~OR~ • An Associate's degree in Business, Analytics, or a related field, and 6 years planning experience ~PLUS~ • Strong communication and organizational skills, • Strong sense of urgency It would also be ideal if you had the following preferred qualifications: • Any advanced degree or professional certifications are a plus, • Experience with PowerBI, • Experience in supporting new product development and introduction How we care for you: • Financial Rewards: Great compensation package, bonus opportunities, matching 401k and the ability to participate in Employee Stock Purchase Plan (select locations), Flexible Spending and Health Savings Accounts, • Work/Life Balance: Flexible paid time off, holidays and parental leave program, relocation assistance, • Health & Wellbeing: Comprehensive insurance coverage including medical, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages, • Professional Skills Development: Tuition Assistance, mentorship and coaching opportunities, leadership development and other personal growth programs, • Collaborative and Welcoming Culture: Warm, respectful, family-like environment rooted in our 12 core values. Enhanced by multiple employee-led Employee Resource Groups, and various team-building activities, delivering a truly open and supportive workplace., • Additional site-specific benefits including miles of walking trails, sports leagues, exciting employee engagement events and more! #LI-SR1 Salary Range Transparency: Buffalo, NY $70,000.00-$90,000.00 Annually Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787. No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Absent compliance with these pre-conditions resumes submitted directly to any Moog Inc. employee or affiliate will not qualify for fee payment, and therefore become the property of Moog Inc.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: Manufacturing Engineering Manager Reporting To: Director, AG Mach Automation Prog Work Schedule: Onsite - Buffalo, NY Our team in Military Aircraft Group is looking for a Manufacturing Engineering Manager to join them. You will report to the Site Manufacturing Engineering Director and have an onsite work schedule in East Aurora, NY. This position will lead a high-visibility transformation within our machining and support operations. This role offers the opportunity to take ownership of a major transition into our Advanced Integrated Manufacturing (AIM) facility shaping the future of how we build, scale, and innovate. In this role, you will lead a cross-functional engineering team across machining, tool design, and special processes, while driving both operational performance and long-term strategic initiatives. You will play a critical role in capital planning, process optimization, and the implementation of automation and advanced manufacturing technologies. This is an ideal opportunity for a leader who thrives on ownership, enjoys solving complex challenges, and can influence across functions to deliver meaningful results. As Manufacturing Engineering Manager, you will: • Lead your portion of the AIM transition: Plan and execute the transfer of machinery, tooling, and processes from the current campus location to the new AIM facility., • Manage and deliver tactical and operational plans with clear KPIs and measurable results., • Maintain a rolling 10-year capital plan for your area of responsibility., • Oversee capital equipment selection, justification, acquisition, and onboarding., • Monitor Target vs. Actual performance for assigned parts and drive continuous improvement., • Help define and execute manufacturing engineering strategies aligned with site and divisional objectives., • Identify, justify, and implement process improvements (machining and non-machining), including automation opportunities., • Establish and drive short-term tactical and operational plans to meet production, quality, and schedule goals. To be considered for this role, here's what you'll typically bring with you: • Bachelor's degree in engineering with 10+ years of progressive manufacturing engineer experience, ideally in machining environments., • 3+ years of proven leadership experience in manufacturing engineering, ideally in machining environments., • Strong project management skills with proven ability to deliver complex projects on schedule., • Excellent interpersonal and communication skills with ability to engage stakeholders at all levels., • Ability to influence cross-functional teams and stakeholders outside the immediate group and lead through change., • Proficiency with Microsoft Office: Excel, Project, PowerPoint, and Word. You would be a preferred candidate if you had: • Machining process optimization experience and a hands-on machining background., • Experience identifying and leading automation initiatives., • Experience with quoting, estimating, insourcing/outsourcing decisions, and resource planning., • Understanding of Cost Account Manager responsibilities., • Manual CNC programming experience., • CAD and CAM programming experience., • Design for Manufacturing (DfM) mindset, GD&T, and blueprint reading., • Ability to build custom reports using SQL and Power BI., • Familiarity with JIRA and Teamcenter. How We Care for You: • Financial Rewards: great compensation package, bonus opportunities, matching 401k, and the ability to participate in Employee Stock Purchase Plan (select locations), Flexible Spending and Health Savings Accounts, • Work/Life Balance: Flexible paid time off, holidays and parental leave program, relocation assistance., • Health & Welfare: Comprehensive insurance coverage including medical, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages., • Professional Skills Development: Tuition Assistance, mentorship and coaching opportunities, leadership development and other personal growth programs, • Culture: Warm, respectful, family-like environment driven by our 12 core values. Multiple Employee Resource Groups led by our employees, open and welcoming to all. Salary Range Transparency: Buffalo, NY $140,000.00-$190,000.00 Annually Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787. No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Absent compliance with these pre-conditions resumes submitted directly to any Moog Inc. employee or affiliate will not qualify for fee payment, and therefore become the property of Moog Inc.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: Senior Manufacturing Engineer Reporting To: Plant Manager Work Schedule: Onsite - Buffalo, NY Moog's Commercial Aircraft business supports the full aircraft lifecycle-from design, development, testing, and certification to in-service support. Our capabilities include OEM design, aftermarket services, engine accessory repairs, aircraft control components, and advanced avionics and digital airfield solutions. Reporting to the Plant Manager, our team in Commercial Aircraft Group is looking for a Senior Manufacturing Engineer to join them for an on-site, work schedule in West Falls, New York. As the Senior Manufacturing Engineer, you will prepare detailed manufacturing instructions and programming data to produce machined parts and to meet engineering drawings and specifications. You will determine manufacturing procedures and operation sequencing and establish tooling, gauging, and machine requirements to fabricate parts and sub-assemblies for various products. In addition, you will spend time in the machine shop solving problems and improving processes associated with the parts you are responsible for. As a Senior Manufacturing Engineer, you will.... • Support timely and efficient processing of parts through the shop by generating operation sheets and manufacturing procedures on assigned parts., • Assure compatibility of engineering drawings and specifications with manufacturing and fabrication capabilities by reviewing drawings and making suggestions for changes and revisions to enhance producibility., • Provide accurate and usable N/C programming tapes by converting detailed N/C program outlines into specific coded machine instructions., • Assist machinists with program prove out., • Establish standard times for setup and run of each operation on assigned parts., • Originate studies directed towards more efficient manufacturing of parts. Including recommendations for changes in equipment, process methods, materials, and designs., • Follow up on jobs during the initial stage of manufacturing to ensure processing and effect revisions to tooling and processing as necessary., • Prepare rework operation sheets for salvage of discrepant parts. Following through with corrective action to reduce the possibility of reoccurrence of discrepant parts., • Establish tooling, gaging, and fixture concepts. Reviewing and approving tool, gaging, and fixture design drawings., • Estimate hours required to design and also fabricate tools and fixtures., • Prepare detailed operation sheets and N/C programs, making estimates of setup, and run hours for production parts, and estimating design and build hours for tooling., • Prepare cost estimates for new proposals., • Technically guiding or training other Manufacturing Engineers and Technicians as necessary. To be considered for a Senior Manufacturing Engineer, here's what you'll typically need to bring with you..... • Bachelor's degree in engineering or technical field., • 5 years of relevant experience, Focused scholastic research or internships/co-op experience will be considered., • Excellent interpersonal and presentation skills, energetic and self-starter., • Demonstrated ability to manage multiple tasks simultaneously and able to react to shifting priorities to meet business needs., • Demonstrated ability to meet deadlines and commitments., • Knowledge of Milling operations, preferably 5-axis., • Programming experience required, preferably with NX., • Knowledge of GD&T and blueprint reading How We Care for You: • Financial Rewards: great compensation package, bonus opportunities, 401k matching, and the ability to participate in Employee Stock Purchase Plan (select locations), Flexible Spending and Health Savings Accounts., • Work/Life Balance: Flexible paid time off, holidays and parental leave program, relocation assistance., • Health & Welfare: Comprehensive insurance coverage including medical, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages., • Professional Skills Development: Tuition Assistance, mentorship and coaching opportunities, leadership development and other personal growth programs., • Culture: Warm, respectful, family-like environment driven by our 12 core values. Multiple Employee Resource Groups led by our employees, open and welcoming to all. #LI-CP1#onsite Salary Range Transparency: Buffalo, NY $110,000.00-$135,000.00 Annually Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787. No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Absent compliance with these pre-conditions resumes submitted directly to any Moog Inc. employee or affiliate will not qualify for fee payment, and therefore become the property of Moog Inc.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: Manufacturing Engineer/CNC Programmer - Milling Reporting To: Leader, Mfg. Engineering Tech. Work Schedule: Onsite - Buffalo, NY Our Military Aircraft Group is seeking a Manufacturing Engineer/NC Programmer to join our Prismatic Manufacturing Group in East Aurora, NY. This is your opportunity to join a high-impact team where innovation meets precision, and your expertise drives the development of cutting-edge aerospace components. As a Manufacturing Engineer/CNC Programmer, you'll be at the forefront of both new product development and continuous improvement of existing manufacturing processes. You'll work hands-on with milled parts, applying advanced CNC programming and machining knowledge to solve challenges and optimize performance. As a Manufacturing Engineer/CNC Programmer, you will: • Develop and optimize CNC Mill machining processes for both new and legacy components, • Create detailed CNC programs and manufacturing instructions that meet rigorous engineering specifications, • Define operation sequences, tooling, gauging, and machine requirements for precision part fabrication, • Troubleshoot shop floor issues, including tooling, gauging, workholding, and inspection challenges, • Collaborate with cross-functional teams to resolve manufacturing problems and enhance producibility, • Create detailed operation sheets and NC programs to produce high-precision machined parts and sub-assemblies, • Review engineering drawings for manufacturability and recommend design improvements, • Assist in the creation of machine-ready code and be hands-on in the production environment, assisting with program prove-outs and troubleshooting, • Estimate setup/run times and tooling hours; contribute to cost estimation for new business proposals, • Mentor junior engineers and lead continuous improvement initiatives in processes and equipment To be considered for this role, here's what you'll typically bring: • A Bachelor's degree in a technical field with 3+ years of relevant professional experience, or an Associate degree with 6+ years of relevant professional experience, or a High School Diploma/GED with 8+ years of proven professional experience, • Proficiency in CNC Mill Machining, • 3+ years experience CNC Programming using CAD/CAM software, • Hands-on experience with machine setup and operation It'd be great if you also had: • A degree in Mechanical, Manufacturing, or Industrial Engineering, • Background in the aerospace industry, • Experience with machine automation integration, • Skills in inspection of machined parts, • Hands-on experience machining stainless steel, titanium, and aluminum, • Proficiency in CNC Programming using Siemens NX, • Knowledge of Lean Manufacturing principles; Lean Six Sigma certification is a plus How we care for you: • Financial Rewards: great compensation package, bonus opportunities, matching 401k, and the ability to participate in Employee Stock Purchase Plan (select locations), Flexible Spending and Health Savings Accounts, • Work/Life Balance: Flexible paid time off, holidays and parental leave program, relocation assistance., • Health & Welfare: Comprehensive insurance coverage including medical, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages., • Professional Skills Development: Tuition Assistance, mentorship and coaching opportunities, leadership development and other personal growth programs, • Culture: Warm, respectful, family-like environment driven by our 12 core values. Multiple Employee Resource Groups led by our employees, open and welcoming to all. #LI-RG1 Salary Range Transparency: Buffalo, NY $80,000.00-$120,000.00 Annually Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787. No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Absent compliance with these pre-conditions resumes submitted directly to any Moog Inc. employee or affiliate will not qualify for fee payment, and therefore become the property of Moog Inc.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: Manufacturing Engineer/CNC Programmer - Mill-Turn Reporting To: Leader, Mfg. Engineering Tech. Work Schedule: Onsite - Buffalo, NY Our team in Military Aircraft is looking for a Manufacturing Engineer/CNC Programmer to join them. You will report to the Manufacturing Engineering Technical Leader and will have an onsite work schedule in East Aurora, NY. As a Manufacturing Engineer/CNC Programmer, you'll be at the forefront of both new product development and continuous improvement of existing manufacturing processes. You'll work hands-on with high precision parts, applying advanced CNC programming and machining knowledge to solve challenges and optimize performance. As a Manufacturing Engineer/CNC Programmer, you will: • Create detailed operation sheets and CNC programs to produce high-precision machined parts and sub-assemblies., • Define manufacturing sequences, tooling, gauging, and machine requirements to streamline production., • Work closely with engineering, quality, production, and vendors to resolve issues and enhance manufacturability., • Be hands-on in the production environment, assisting with program prove-outs and troubleshooting., • Recommend and implement process enhancements, tooling upgrades, and design modifications., • Assist in estimating costs and timelines for new proposals and tooling development. To be considered for this role, typically you'll bring: • A Bachelor's degree in a technical field with 3+ years of relevant professional experience, or an Associate degree with 6+ years of relevant professional experience, or a High School Diploma/GED with 8+ years of proven professional experience, • 3+ years experience CNC programming using CAD/CAM software, • Experience with mill-turn machines, • Strong knowledge of process engineering from raw material to finished product, • Hands-on experience with machine setup and operation, • Excellent communication and documentation skills to work effectively across departments It'd be great if you also had: • A degree in Mechanical, Manufacturing, or Industrial Engineering, • Background in the aerospace industry, • Experience with machine automation integration, • Skills in inspection of machined parts, • Hands-on experience machining stainless steel, titanium, and aluminum, • Proficiency in CNC Programming using Siemens NX, • Knowledge of Lean Manufacturing principles; Lean Six Sigma certification is a plus How we care for you: • Financial Rewards: great compensation package, bonus opportunities, matching 401k, and the ability to participate in Employee Stock Purchase Plan (select locations), Flexible Spending and Health Savings Accounts, • Work/Life Balance: Flexible paid time off, holidays and parental leave program, relocation assistance, • Health & Welfare: Comprehensive insurance coverage including medical, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages, • Professional Skills Development: Tuition Assistance, mentorship and coaching opportunities, leadership development and other personal growth programs, • Culture: Warm, respectful, family-like environment driven by our 12 core values. Multiple Employee Resource Groups led by our employees, open and welcoming to all #LI-RG1 Salary Range Transparency: Buffalo, NY $80,000.00-$120,000.00 Annually Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787. No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Absent compliance with these pre-conditions resumes submitted directly to any Moog Inc. employee or affiliate will not qualify for fee payment, and therefore become the property of Moog Inc.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: Manufacturing Engineer/CNC Programmer Reporting To: Leader, Mfg. Engineering Tech. Work Schedule: Onsite - Buffalo, NY Our team in Military Aircraft Group is looking for a Manufacturing Engineer/CNC Programmer with expertise in Multi-Axis Machining to join our high-performance team. You will report to the Manufacturing Engineering Manager and will have an onsite work schedule in East Aurora, NY. If you're passionate about precision, thrive in a collaborative environment, and love solving complex challenges, this is your opportunity to make a real impact. As a Manufacturing Engineer/CNC Programmer, you will: • Create detailed operation sheets and NC programs to produce high-precision machined parts and sub-assemblies, • Define manufacturing sequences, tooling, gauging, and machine requirements to streamline production, • Work closely with engineering, quality, production, and vendors to resolve issues and enhance manufacturability, • Be hands-on in the production environment, assisting with program prove-outs and troubleshooting, • Recommend and implement process enhancements, tooling upgrades, and design modifications, • Assist in estimating costs and timelines for new proposals and tooling development To be considered for this role, here's what you'll typically bring with you: • A Bachelor's degree, or an Associate's degree with 6+ years of relevant experience, or a High School diploma with 8+ years of relevant experience, • 3+ years of CNC programming experience using CAD/CAM software, • Experience with Multi-Axis Machining, • Strong knowledge of process engineering from raw material to finished product, • Hands-on experience with machine setup and operation, • Excellent communication and documentation skills to work effectively across departments How we care for you: • Financial Rewards: great compensation package, bonus opportunities, matching 401k, and the ability to participate in Employee Stock Purchase Plan (select locations), Flexible Spending and Health Savings Accounts, • Work/Life Balance: Flexible paid time off, holidays and parental leave program, relocation assistance., • Health & Welfare: Comprehensive insurance coverage including medical, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages., • Professional Skills Development: Tuition Assistance, mentorship and coaching opportunities, leadership development and other personal growth programs, • Culture: Warm, respectful, family-like environment driven by our 12 core values. Multiple Employee Resource Groups led by our employees, open and welcoming to all. #LI-RG1 Salary Range Transparency: Buffalo, NY $80,000.00-$120,000.00 Annually Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787. No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Absent compliance with these pre-conditions resumes submitted directly to any Moog Inc. employee or affiliate will not qualify for fee payment, and therefore become the property of Moog Inc.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: Electronics Assembler I - 2nd Shift Work Schedule: Onsite - Buffalo, NY Our team in Military Aircraft Group is looking for an Electronics Assembler I to join them. You will report to the Performance Leader and will have an onsite, 2nd shift work schedule in Elma, New York. To be considered for Electronics Assembler I, here's what you'll need to bring with you: • High School diploma or GED preferred. Otherwise, demonstrated ability to understand and apply all verbal, written and computer work instructions or training in English, and demonstrated ability to perform simple addition, subtraction, multiplication and division., • At least 1 year of manufacturing assembly experience, preferably in related electronics., • Follow strict Federal Aviation Agency (F.A.A.) regulations regarding Safety Sensitive Work (S.S.W.), employee enrollment and participation in the company's "F.A.A. Drug & Alcohol Program" is a requirement for this position. As an Electronics Assembler I, you will: • Assemble high reliability chassis and final assemblies using circuit cards, stand offs, wire harnesses, solder and crimping, electrical and mechanical instruments. Complete inspections and Foreign Object Debris (FOD) checks., • Perform high reliability soldering and crimping operations on complex sub-assemblies, electronic, and mechanical assemblies, repair of circuit boards, jumper wires, and wire harnesses., • Solder/crimp wires and jumpers to multiple pin connectors/assemblies to meet government/customer inspection and specification., • Decipher assembly drawings Bill of Material (B.O.M) and work with electronic work instructions., • Know and follow applicable Electro-Static Discharge (ESD) procedures; understand high reliability soldering specifications and meet certification requirements as applicable., • Be familiar with several different cleaning procedures, different potting compounds, and paints., • Use a variety of tools such as regular hand tools, dial torque wrenches, auto torque drivers, crimpers, fixtures, digital calipers, solder iron, hot tweezers, heat gun, microscope, and high-resolution equipment., • Clean and maintain work areas and equipment including tools, keeping area clean from FOD. How We Care for You: • Financial Rewards: great compensation package, bonus opportunities, matching 401k, and the ability to participate in Employee Stock Purchase Plan (select locations), Flexible Spending and Health Savings Accounts, • Work/Life Balance: Flexible paid time off, holidays and parental leave program, relocation assistance., • Health & Welfare: Comprehensive insurance coverage including medical, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages., • Professional Skills Development: Tuition Assistance, mentorship and coaching opportunities, leadership development and other personal growth programs, • Culture: Warm, respectful, family-like environment driven by our 12 core values. Multiple Employee Resource Groups led by our employees, open and welcoming to all., • 2nd shift employees receive a 10% shift differential Salary Range Transparency: Buffalo, NY $22.00-$27.00 Hourly Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787. No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Absent compliance with these pre-conditions resumes submitted directly to any Moog Inc. employee or affiliate will not qualify for fee payment, and therefore become the property of Moog Inc.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: Quality Assurance Technician Reporting To: Engineer, Project QA Work Schedule: Onsite - Buffalo, NYMoog Defense Group is recruiting for a Quality Assurance Technician to join the team in East Aurora. The Quality Technician should be self-motivated and can follow through on assignments with limited supervision. Must have the ability to work on several assignments and/or programs concurrently. To be considered for the Quality Assurance Technician role, here's what you'll need to bring with you: • High School Diploma or GED and 3 years of manufacturing experience in a quality role including writing and tracking nonconformances, corrective actions and supporting nonconformance investigations and CAPA processes or an Associate's degree and 0-3 years of manufacturing experience, • Ability to obtain a U.S. DoD Secret Security Clearance., • Experience working in controlled manufacturing environments is a plus., • Candidates local to WNY area preferred. Relocation will not be provided for this role. Preferred Qualifications: • Background in machining, inspection, assembly, test, • Experience in reading engineering drawings or equivalent, using precision measuring equipment such as air gauges, Vici laser mic systems, super micrometers, microscopes, and CMM equipment, and working with various quality standards, • Familiar with AS9100 specifications and quality documentation best practices., • Ability to work in a team environment, • Strong communication skills and experience collaborating with engineering and manufacturing teams to improve product compliance and reliability., • Experience supporting process validation, tooling trials, coefficient/gauge capability studies, SPC, and participation in continuous improvement activities (Kaizen). As a Quality Assurance Technician you will be responsible for the following: • Under the direction of a Sr. Quality Technician or a Quality Engineer, you will perform production inspection plans for receiving inspection, manufacturing, assembly & test, engineering procedures and first article inspection plans. This may include the performance of physical inspections, process capability studies, gauge capability studies, and/or implementation of statistical process control plans., • Conduct detailed visual and dimensional inspections using microscopes and precision gauges., • Verify and maintain compliance with contractual changes related to quality., • Perform routine technical tasks such as product/process improvement studies, development of new systems and procedures, and support of process validation efforts and tooling trials., • Prepare and perform customer source inspections., • Apply basic problem-solving techniques to assist in the resolution of fabrication and product related problems, support nonconformance investigations, and execute corrective actions., • Apply basic problem-solving techniques to assist in the resolution of fabrication and product-related problems-, • Collecting and analyzing data, draw conclusions, and make recommendations., • Support continuous improvement initiatives (Kaizen) to ensure safe, organized, and precision-driven workspaces, • Frequent personal contact with customers and teams require critical interpersonal skills, writing skills, tact, and persuasiveness., • Additional strengths you bring: Strong organizational and time-management skills; safety-focused and quality-driven work ethic. Detail-oriented, adaptable, and able to handle multiple tasks simultaneously. Experience working directly with engineering and collaborating across production, inspection, and engineering teams How We Care for You: • Financial Rewards: great compensation package, bonus opportunities, matching 401k, and the ability to participate in Employee Stock Purchase Plan (select locations), Flexible Spending and Health Savings Accounts, • Work/Life Balance: Flexible paid time off, holidays and parental leave program, relocation assistance., • Health & Welfare: Comprehensive insurance coverage including medical, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages., • Professional Skills Development: Tuition Assistance, mentorship and coaching opportunities, leadership development and other personal growth programs, • Culture: Warm, respectful, family-like environment driven by our 12 core values. Multiple Employee Resource Groups led by our employees, open and welcoming to all. #LI-DJ1 Salary Range Transparency: Buffalo, NY $28.00-$37.00 Hourly Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787. No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Absent compliance with these pre-conditions resumes submitted directly to any Moog Inc. employee or affiliate will not qualify for fee payment, and therefore become the property of Moog Inc.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: CNC Programmer Work Schedule: Onsite - Buffalo, NY Our Military Aircraft Group is seeking a CNC Programmer to join our Manufacturing Engineering Team in East Aurora, NY. This is your opportunity to join a high-impact team where innovation meets precision, and your expertise drives the development of cutting-edge aerospace components. In this role, you'll be at the forefront of both new product development and continuous improvement of existing manufacturing processes. You'll work hands-on with complex machined parts, applying advanced CNC programming and machining knowledge to solve challenges and optimize performance. As a CNC Programmer, you will: \n • Develop and optimize machining processes for both new and legacy components\n, • Create detailed CNC programs and manufacturing instructions that meet rigorous engineering specifications\n, • Define operation sequences, tooling, gauging, and machine requirements for precision part fabrication\n, • Troubleshoot shop floor issues, including tooling, gauging, workholding, and inspection challenges\n, • Collaborate with cross-functional teams to resolve manufacturing problems and enhance producibility\n, • Create detailed operation sheets and NC programs to produce high-precision machined parts and sub-assemblies\n, • Review engineering drawings for manufacturability and recommend design improvements\n, • Assist in the creation of machine-ready code and be hands-on in the production environment, assisting with program prove-outs and troubleshooting\n, • Estimate setup/run times and tooling hours; contribute to cost estimation for new business proposals\n, • Mentor junior engineers and lead continuous improvement initiatives in processes and equipment\n\n To be considered for this role, here's what you'll typically bring: \n • A Bachelor's degree in a technical field with 3+ years of relevant professional experience, or an Associate degree with 6+ years of relevant professional experience, or a High School Diploma/GED with 8+ years of proven professional experience\n, • 3+ years experience CNC Programming using CAD/CAM software\n, • Hands-on experience with machine setup and operation\n\n It'd be great if you also had: \n • A degree in Mechanical, Manufacturing, or Industrial Engineering\n, • Background in the aerospace industry\n, • Experience with machine automation integration\n, • Skills in inspection of machined parts\n, • Hands-on experience machining stainless steel, titanium, and aluminum\n, • Proficiency in CNC Programming using Siemens NX\n, • Knowledge of Lean Manufacturing principles; Lean Six Sigma certification is a plus\n\n How We Care for You: \n • Financial Rewards: great compensation package, bonus opportunities, matching 401k, and the ability to participate in Employee Stock Purchase Plan (select locations), Flexible Spending and Health Savings Accounts\n, • Work/Life Balance: Flexible paid time off, holidays and parental leave program, relocation assistance.\n, • Health & Welfare: Comprehensive insurance coverage including medical, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages.\n, • Professional Skills Development: Tuition Assistance, mentorship and coaching opportunities, leadership development and other personal growth programs\n, • Culture: Warm, respectful, family-like environment driven by our 12 core values. Multiple Employee Resource Groups led by our employees, open and welcoming to all.\n\n Salary Range Transparency: Buffalo, NY $80,000.00-$120,000.00 Annually Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787. No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Absent compliance with these pre-conditions resumes submitted directly to any Moog Inc. employee or affiliate will not qualify for fee payment, and therefore become the property of Moog Inc.

Xylem is a Fortune 500 global water solutions company dedicated to advancing sustainable impact and empowering the people who make water work every day. As a leading water technology company with 23,000 employees operating in over 150 countries, Xylem is at the forefront of addressing the world's most critical water challenges. We invite passionate individuals to join our team, dedicated to exceeding customer expectations through innovative and sustainable solutions. CORE RESPONSIBILITIES: To perform the job successfully, an individual must be able to perform each essential duty satisfactorily. • Performs all levels of welding-brazing and set-up on Heat Exchanger Product. In accordance with ASME Code and Mil Spec. Requirements, must pass welding and set-up performance qualification tests. Position requires a broad knowledge of welding technology and experience. Methods applied and welding assignments may vary depending on skills and welding ability., • Select and set-up welding equipment required, position, jig up or clamp material to be welded or brazed to dimensional requirements. Adjust current input, select gas to obtain proper weld for maximum strength., • Works from drawings, specifications. Use of scale, square, protractor, templates, straight edge, plumbline and fixed gauges., • Requires ASME Certification, military certificate (brazing) and knowledge of ASME Section IX Standards., • Cleans parts and welds by appropriate means., • Obtains parts and materials within the department., • Clean up debris after completing each job., • Additional duties and responsibilities may be required based on organizational needs., • Payrate $33.78/hour plus $0.85 shift differential QUALIFICATIONS: Education • High School diploma or equivalent, • Completion of a vocational school in welding practices Experience • 1 to 2 years of fabrication set-up and welding, • Must be able to read and interpret blueprints., • Must pass a welding test. Physical Demands: • Lifting (30-35 lbs.), manufacturing floor environment, • Regularly required to sit or stand, reach, bend and move about the facility., • Regularly required to listen, talk to, and see employees on a daily basis. Work Environment: • Typical Manufacturing environment Join the global Xylem team to be a part of innovative technology solutions transforming water usage, conservation, and re-use. Our products impact public utilities, industrial sectors, residential areas, and commercial buildings, with a commitment to providing smart metering, network technologies, and advanced analytics for water, electric, and gas utilities. Partner with us in creating a world where water challenges are met with ingenuity and dedication; where we recognize the power of inclusion and belonging in driving innovation and allowing us to compete more effectively around the world. At Xylem, you'll not only contribute to solving water issues but also have the chance to make a difference through our paid Volunteer Program, Xylem Watermark. We prioritize our employees' well-being through inclusion and belonging as well as our Employee Resource Groups (ERG). Proud to be an Equal Employment Opportunity (including disability and veterans) and Affirmative Action workplace, Xylem fosters an inclusive environment free from discrimination or harassment. Please note that the information in this job description outlines the general nature of the position and is not an exhaustive list of duties. Xylem is dedicated to providing reasonable accommodations to enable all employees to perform their essential job functions. We reserve the right to modify this job description and assign additional duties as needed. Embrace the opportunity to be part of Xylem's transformative journey in shaping the future of water technology! #XylemCareers #GlobalImpact #WaterInnovation

Job Description Our organization is currently in search of a Full-time Occupational Therapist (OT) to join our team at a Skilled Nursing Facility. Requirements for the Occupational Therapist Position: Must have graduated from an accredited Occupational Therapy Program. Possession of a valid Occupational Therapy License in New York State is essential. Experience in a skilled nursing or geriatric care environment is preferred; however, we welcome applications from new graduates with relevant experience. Primary Responsibilities: Assess residents and create individualized OT treatment plans tailored to their specific needs. Select activities that empower residents to perform daily tasks independently. Monitor, evaluate, and document residents' progress in occupational therapy through detailed reporting. Ensure resident confidentiality by managing sensitive information appropriately. Foster a collaborative atmosphere among the healthcare team. What We Provide for Our Occupational Therapists: • Highly competitive salary., • A comprehensive benefits package that includes medical, vision, dental insurance, and a 401k retirement plan., • Generous paid time off (PTO) that begins accruing from day one., • Opportunities for professional development, including reimbursement for continuing education units (CEUs) and advanced training., • Access to mentorship and clinical support, along with cutting-edge technology., • Flexible scheduling, weekly pay, an Employee Referral Program, and additional perks!, • Utilization of current evidence-based practices aligned with the standards set by the American Occupational Therapy Association. About Us: Our organization is a leading provider of innovative rehabilitation services. We are dedicated to the transformative power of rehabilitation, striving to help individuals overcome obstacles, achieve their goals, and regain their independence. Located in Buffalo, New York, we are seeking a compassionate and dedicated Occupational Therapist (OT) who is either currently licensed in New York or a graduate from an accredited Occupational Therapy program actively pursuing licensure. Join our experienced rehabilitation team committed to assisting each patient in regaining independence and reaching their rehabilitation objectives in our state-of-the-art rehab gym. Whether you are an experienced professional or just starting your career, we invite you to bring your skills as an Occupational Therapist to enhance the lives of others.

Job Description AVI Foodsystems is looking for an energetic and optimistic leader to immediately hire to fill the role of Full-time Chef Manager at one of our Dining accounts. This position is scheduled day-shift Monday through Friday, NO evenings, NO weekends and NO holidays. This is a great opportunity for a culinarian to have a work/life balance. Come experience the benefits of contract food service! The annual salary for this position is $62,353.20. Founded in 1960, AVI Foodsystems has evolved into one of the most respected and trusted food service companies in the nation. Providing comprehensive food services with a focus on the highest quality and freshest ingredients, impeccable service and total value is the reputation we have earned and live up to everyday. Duties & Responsibilities: • Plan, organize and direct the work of cooks and other team members engaged in the procurement, storage, preparation and serving of food, • Assist in preparation of budget estimates and justifications for the food service program, • Plan and direct the ordering, receiving and accounting of all food products, supplies and equipment for food operation, • Evaluate existing operational methods and procedures of food service program for effectiveness and efficiency, initiating changes as necessary, • Interview, select, manage and develop hourly team members, • Oversee the food safety to ensure full compliance with federal, state and other regulatory agencies, • Participate in the development and adherence of policies and procedures for the food service program Requirements: • A formal culinary degree is preferred, • 3 or more years of food service chef/management experience, • Prior experience leading, motivating and developing teams, • Proven ability in meeting and maintaining budget goals, • Exceptional written and verbal communication skills Benefits: • A family culture and atmosphere, • Competitive compensation, • Health, dental, vision, and life insurance for full-time team members, • 401(k) with generous company match, • Paid vacations and holidays, • Immense training and growth opportunities We conduct pre-employment drug testing. EOE #LI-DP1

Job Description Location: Canisius College • We are hiring immediately for a full time CHEF position., • Address: 2001 Main Street, Buffalo, NY 14208. Note: online applications accepted only., • Schedule: Full time schedule; days and hours may vary, including mornings, afternoons, evenings, weekdays, and weekends. More details upon interview., • Requirement: Prior food service kitchen experience is required., • Fixed Pay Rate: $23.00 per hour. We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1533633. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: http://olivia.paradox.ai/moSkg Application Deadline: applications are accepted ongoing until all openings are filled for this position. If an applicant is declined due to the position being filled, they may still be considered for future opportunities and are always welcome to reapply. Join our campus team where you are valued and empowered to make a difference. Enjoy competitive wages, benefits, and perks like Instapay through the One @Work app. Our careers are filled with purpose and encourage learning, growth, and meaningful impact. Apply today! Job Summary Summary: Directs, coordinates and evaluates assigned kitchen, food production and food-service associates. Essential Duties and Responsibilities: • Supervises, coordinates and participates in activities of cooks and other associates engaged in preparing, cooking and serving food. Ensures all food handling, sanitation and customer service standards are met., • Supervises hourly kitchen associates, including interviewing, scheduling, payroll, training, counseling, participating in reviews and recommending disciplinary action., • Efficiently prepares high-quality food items according to standardized recipes to meet production, delivery and service schedules. Serves meals or prepares for delivery., • Ensures proper presentation, food quality, portion control and maintenance of proper serving temperatures., • Tracks food use, waste and consumption to requisition or purchase product., • Receives and inspects product and supplies for quality and quantity to ensure appropriate inventory., • Maintains sanitation of equipment, supplies and utensils. Cleans workstation thoroughly before leaving area. Keeps display equipment clean and free of debris during meal service to ensure compliance with sanitation, safety, production and merchandising requirements., • Helps select and develop recipes and menus., • Performs other duties as assigned. The Benefits We are always looking for ways to invest in our people both inside and outside of work to help them achieve their full potential. Both full-time and part-time associates are eligible for the following benefits: • Opportunities for Training and Development, • Retirement Plan, • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program In addition, full-time positions also offer the following benefits to associates: • Medical, • Dental, • Vision, • Life Insurance/AD, • Disability Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Maryland, Washington State, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. https://www.compass-usa.com/wp-content/uploads/2023/08/2023WageTransparencyChartwellsHED.pdf Because this position requires you to perform services in an educational facility, there may be periods when the Company does not require you to perform work (such as winter and summer breaks when food service needs decline or cease). Any such periods during which you do not perform work on the Company’s behalf may be unpaid and deemed a temporary layoff. However, depending on business needs, you may be required to work year-round, potentially at a different location during break periods. Business needs may vary from year to year. Our Commitment to Diversity and Inclusion Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Certain positions may require Florida Level 2 background screening. Details: https://info.flclearinghouse.com/ Applications are accepted on an ongoing basis. Chartwells Higher Ed maintains a drug-free workplace. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act.

Job DescriptionESSENTIAL JOB FUNCTIONS The Regional Manager will lead all aspects of the commercial development of the Therapy to treat Obstructive Sleep Apnea (OSA) in a defined geographic region. The Regional Manager will hire exceptional sales and clinical support talent. Execute the commercial plan consistent with the Company’s stated objectives. OPPORTUNITIES YOU WILL HAVE IN THIS ROLE • Work with Area Vice President of Sales to assess, select, and train new medical centers who want to offer the therapy., • Hire a sales and technical support team that have skills and attributes to meet and exceed business and quality objectives., • Establish a vibrant and performance-based culture within the regional sales team., • Drive a consistent approach to build flow of interested and appropriately indicated patients into trained medical centers within the region., • Establish and implement best practice sharing within the region to aid in achieving the projected sales and PET (Patients Expecting Therapy) quotas., • Work closely with Therapy Awareness Managers, Marketing, Reimbursement Team and Sales Operations to promote and maintain the highest possible relationships with our external customers and in-house team., • Develop and provide coaching and feedback (sales, communication, clinical expertise, etc.) to all members of regional team., • Ensure comprehension and timely completion of Company Quality System policies and procedures. Required Qualifications • Bachelor’s degree - preferably in a technical/scientific field or business/communications., • Minimum of 5+ years in a field sales leadership role within medical and/or pharmaceutical industry., • Successful track record building high-performing teams who consistently outperform expectations., • Strong communicator and leadership presence.

Job DescriptionGTI is a contract manufacturing partner supporting customers in renewable energy, power generation, infrastructure, and industrial systems. We fabricate custom designed, purpose-built enclosures and skids for our customers and perform mechanical and electrical integration in-house, delivering a true turn-key product to our customers. Our scope spans Engineering, prototype builds, through full production, requiring teams that can move fast, adapt, and execute with precision. GTI Values: Safey I Quality I Customer Obsession I Speed I Agility Position Overview GTI Energy is seeking a Senior Mechanical Engineer to lead mechanical and thermal system design for enclosed industrial products including BESS platforms, modular data centers, power skids, and integrated energy infrastructure. This role is responsible for designing cooling systems, airflow management strategies, enclosure integration, and mechanical assemblies that perform reliably under real-world operating constraints. This is not a traditional HVAC or commercial building engineering role. GTI is specifically seeking candidates with experience designing cooling systems for enclosed equipment and industrial systems where space limitations, airflow management, manufacturability, vibration, acoustics, serviceability, and environmental conditions must all be considered simultaneously. The ideal Senior Mechanical Engineer has experience supporting products such as battery systems, power electronics, generator enclosures, modular data centers, industrial skids, switchgear systems, or other enclosed industrial equipment requiring engineered thermal management solutions. Key Responsibilities Thermal System Design & Cooling Integration • Design and integrate cooling systems for enclosed industrial equipment including BESS systems, modular data centers, power distribution equipment, and power generation platforms, • Size cooling systems based on actual equipment heat loads, thermal rejection requirements, and operating conditions, • Develop airflow strategies inside enclosed systems including ducting, circulation paths, pressure balancing, intake/exhaust placement, and thermal zoning, • Design systems for worst-case ambient conditions, elevated operating loads, and real-world environmental constraints rather than nominal conditions only, • Select and integrate off-the-shelf cooling equipment including HVAC units, heat exchangers, fans, chillers, and thermal management components Mechanical System Design & Product Development • Own mechanical design from concept through production release including enclosure layouts, mounting systems, access requirements, structural interfaces, and equipment integration, • Develop 3D CAD models, assemblies, manufacturing drawings, and BOMs using SolidWorks and related engineering tools, • Design for manufacturability, assembly efficiency, serviceability, and long-term reliability, • Support integration of pumps, piping, cable routing, thermal barriers, and mechanical support systems, • Coordinate packaging constraints involving electrical systems, structural members, airflow, and maintenance access Analysis, Validation & Engineering Calculations • Perform thermal analysis, airflow modeling, and engineering calculations supporting cooling system performance, • Support CFD analysis and interpretation where applicable, • Validate mechanical and thermal performance through testing, prototype evaluation, and field feedback, • Participate in heat runs, system testing, troubleshooting, and performance optimization activities, • Ensure designs meet customer, regulatory, and operational requirements Cross-Functional Engineering Collaboration • Partner with Electrical Engineering, Structural Engineering, Manufacturing Engineering, NPI, Quality, and Operations teams throughout product development lifecycle, • Collaborate closely with manufacturing teams to ensure designs align with fabrication, welding, assembly, and integration capabilities, • Support prototype builds, pilot programs, and production launch activities, • Work directly with Supply Chain and vendors on component selection, manufacturability, and technical problem solving Design for Manufacturing (DFM) & Production Support • Drive DFM initiatives focused on reducing complexity, improving repeatability, and supporting scalable production, • Design around manufacturing constraints including weldments, sheet metal fabrication, assembly sequencing, and production tolerances, • Resolve production issues quickly and support continuous product improvement efforts, • Standardize mechanical design approaches, cooling architectures, and reusable engineering solutions where possible Continuous Improvement & Technical Leadership • Support Root Cause Analysis for field issues, thermal failures, or performance deviations, • Contribute to engineering standards, design guides, and best practices across product lines, • Mentor junior engineers and provide technical leadership on mechanical and thermal design challenges, • Drive continuous improvement in performance, cost, manufacturability, and reliabilityRequirements Required Qualifications • Bachelor’s degree in Mechanical Engineering or related engineering discipline, • 6–12+ years of experience in mechanical engineering, thermal systems design, or product development within industrial or engineered product environments, • Experience designing cooling systems for enclosed equipment — not commercial building HVAC systems, • Strong experience with thermal management for battery systems, power electronics, industrial skids, generator enclosures, modular data centers, switchgear, or similar products, • Experience sizing cooling systems based on actual equipment heat loads and operational requirements, • Strong understanding of airflow management inside enclosed systems, • Proficiency with SolidWorks or similar 3D CAD platforms, • Strong knowledge of manufacturability, fabrication methods, and industrial product integration Preferred Qualifications • Experience supporting BESS, modular data centers, power systems, or industrial energy infrastructure, • Experience with CFD analysis and thermal modeling tools, • Background in sheet metal, weldments, enclosure design, or industrial packaging, • Experience in contract manufacturing or engineered-to-order product environments, • Familiarity with UL requirements, environmental testing, or industrial compliance standards, • Experience operating in fast-paced, high-growth engineering organizationsBenefits & Perks GTI Energy offers a competitive compensation and benefits package designed to support employees and their families while providing long-term career growth opportunities within a fast-growing manufacturing organization. Benefits may include: • Medical, dental, and vision insurance, • 401(k) with company match (where applicable), • Paid Time Off (PTO) and paid holidays, • Sick time in accordance with state and local requirements, • Company-paid life insurance and disability coverage, • Career advancement opportunities within a rapidly growing organization, • Exposure to advanced manufacturing, modular infrastructure, and large-scale industrial projects, • Collaborative, fast-paced environment with strong operational and engineering leadership, • Employee-focused culture centered on safety, quality, accountability, and continuous improvement Benefits eligibility and offerings may vary based on position, location, and employment classification. GTI promotes a diverse and inclusive workforce and is an Equal Opportunity Employer that does not discriminate against employees or applicants for employment on the basis of race, color, national origin, ancestry, age, religion, sex, gender, gender identity, gender expression, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, marital status, or any other Federal or State legally-protected classes. We also value the safety of all employees and work hard to maintain a Drug Free Workplace. Privacy PolicyTerms & Conditions We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Position Summary: With team members and customers in 39 countries around the globe, HostPapa is currently one of the fastest-growing web hosting companies with a wide range of products available. At its core, we provide individuals and small and medium-sized businesses with access to valuable tools and services critical to their online success, including a Website Builder service for making website creation an ultra-easy task for anyone. Tailored to meet every user's unique needs, our award-winning customer support, email, and cloud-based solutions keep HostPapa at the cutting edge of the web hosting industry and innovation by putting our customers first. As a Data Center Technician, you will play a key role in supporting the daily operations of our data center. You’ll be hands-on with server hardware, perform system installations and configurations, and ensure that all infrastructure is running smoothly and efficiently. This is a great opportunity for someone who enjoys working in a fast-paced technical environment and takes pride in building and maintaining high-performance systems. This is a full-time, on-site role based in our data center in Buffalo, NY. What you’ll do: • Set up, configure, and deploy physical server hardware according to customer specifications, • Install and manage a variety of operating systems, including Windows Server, CentOS, Ubuntu, and Debian, • Complete technical service requests in person or via ticketing system with a focus on speed, accuracy, and documentation, • Maintain system inventory and configuration records for accountability and future reference, • Perform infrastructure tasks such as cable routing, component replacement, and diagnostic testing, • Keep the data center organized, clean, and operating within established safety and procedural guidelines, • Work collaboratively with internal teams to support ongoing hardware and system needs, • Support other tasks or projects as assigned to meet team and business needs About you: • At least 2 years of hands-on experience with computer hardware, including server builds and installations, • Confident installing and configuring various operating systems (Windows Server, Ubuntu, CentOS, Debian, etc.), • Familiar with data center workflows such as racking equipment and managing cabling, • Comfortable working with SuperMicro hardware and related components, • Strong troubleshooting skills—both onsite and remote, • Detail-oriented with solid organizational habits, • Excellent verbal and written communication skills What we offer: • A competitive salary that values you and your unique skill sets, • Career advancement & professional development opportunities to help you reach your full potential, • Flexible work arrangements to support work/life balance About us: At HostPapa, we’ve been committed to providing a complete array of enterprise-grade cloud services solutions to every business owner since 2006. These services, traditionally out of reach to smaller businesses, are offered in a one-stop shop, making it quick and easy for customers to select the services they need to grow. We back these offerings with 24/7 award‑winning customer support in four languages. Our HostPapa team values diversity and inclusion. We have a friendly company culture built on trust and respect. With the acquisition of several companies into our product portfolio, we’re growing at an incredible rate and have ample opportunities for career growth. Come join our talented team of enthusiastic, hard-working, passionate, driven people engaged in meaningful, innovative work. We can’t wait to meet you! HostPapa is an equal-opportunity employer committed to diversity and inclusion. As a multicultural organization, we encourage individual achievement and recognize the strength of our diverse team. HostPapa is committed to providing accommodations for people with disabilities. If you require accommodation, please let us know, and we will work with you to meet your needs. Accommodation may be provided in all parts of the hiring process. Powered by JazzHR 5P6SbEoKbM

Job Description For Future Opportunities Job Summary At Birgo Realty, we're dedicated to improving lives through real estate. Our operations team manages multifamily properties, provides quality living spaces, and fosters stronger communities. By submitting your resume, you'll express interest in future property management and leasing positions. We always seek talented individuals who are passionate about our mission and eager to contribute to our growth. 1. Submit your resume and complete the application process to join our talent community., 2. Stay connected with us on LinkedIn for updates on upcoming openings, events, and company news. Birgo's Values Teamwork: We leverage one another's strengths to achieve more together. Humility: We admit our faults and strive to continuously improve. Rhinocerality: We charge hard after our highest priorities. Integrity: We do the right thing, even when it is costly. Vision: We innovate and adapt to improve lives. Excellence: We are dependable and accountable to produce quality results. Core Responsibilities Property Performance Leasing Resident Satisfaction Budgeting Leadership, Management, and Accountability Team and Resident Safety Property Maintenance Successful Candidate Profile Property Manager (Senior, Area, or Regional): Multi-site management experience, strong understanding of conventional/market-rate multifamily markets, and demonstrated people management skills. Familiarity with AppFolio is a plus! Experience with Section 8 and subsidy programs could be helpful in certain areas. Assistant Property Managers: Leasing or property management administration experience. Leasing Agents: Strong customer service or sales background. General Requirements Technology at Birgo: We fully embrace technology! Comfort with tech is essential. Interpersonal and Communication Skills: Excellent written, verbal, and persuasive communication skills. Location: Ability to work onsite at properties every workday, including select weekends and evening leasing hours. We serve communities across Western PA, West Virginia, Western New York, and Ohio. Work Requirements: Must have an active driver's license, an insured vehicle, and be able to navigate stairs and uneven terrain, transport up to 25 lbs, and work on a computer for a full day. Benefits Medical, dental, vision, life, and pet insurance with company contribution Paid time off, paid holidays, sick time, and mental health days 401(k) with employer match Company profit-sharing program Team outings and volunteer events Professional development reimbursement program Healthy lifestyle reimbursement program Discounted rates at Birgo properties Mileage reimbursement • Travel & home improvement perks More About Birgo Birgo Realty is a dynamic, growing company with the energy and agility of a startup. We offer our team meaningful opportunities for professional development, prioritize holistic well-being, and create a culture where we celebrate both individual and shared successes. We're committed to building an inclusive workplace and actively seek out diverse backgrounds, perspectives, and experiences to strengthen our team.

Job DescriptionSalary: $80,000-$100,000 Position Summary: SAMCO Technologies is a leader in the Pure Water and Wastewater Industry. This individual is responsible to provide estimating services, manage the proposal creation, and support the work of purchasing and inventory control while continuously looking to enhance current processes, systems and standards. Position Responsibilities: Applications • Perform initial review and annotate customer specifications as part of Request for Proposal (RFP) evaluation Communicate with customers to ensure winning scope is selected As part of 612 month onboarding, constantly correspond with SAMCO Process Engineering to select materials of construction, instruments, valves, equipment, and controls • Evaluate bid specification packages against standards and work with SAMCO Process Engineering to develop a strategic winning scope with clarifications and deviations, while managing SAMCO risk, • Compose P&IDs and run process projections (using various software), • Size and select system components, • Review commercial conditions and provide management with summary review Estimating • Track response time and resource requirements to complete an estimate and make it available for future reference, • Complete accurate estimates efficiently, develop new and enhance estimating templates, • Interact with Sales, Engineering, and Manufacturing teams to develop cost-effective, winning estimates, • Review historic information and work with team members to develop current actual costs and maintain a log for tracking performance of actual vs. estimate, percent wins, etc., • Develop estimates for standard products and services General • Utilize SAGE100/Job Ops manufacturing system, • Develop process work tickets and templates, • Develop standard work tickets and bills of material for product lines, • Assist in the standardization of materials and vendors, • Participate in meetings and special projects as required Skills and Qualifications: • Bachelors Degree in Chemical Engineering, • 2 years of experience with estimating and/or project management, with a focus in chemical process treatment and system design Take the plunge and join our growing team of water treatment experts!

Job Description Customizable Schedule | >80% Subspecialty Neuro Focus | Strong Support Structure We are recruiting board-certified or board-eligible neuroradiologists on behalf of a well-established, physician-led radiology practice seeking talented professionals to join their team. This client offers a modern, supportive environment that prioritizes radiologist autonomy, work-life balance, and efficient workflows. Enjoy fully remote or onsite reading options, the ability to tailor your caseload with a strong emphasis on neuroradiology (typically >80% subspecialty work unless otherwise preferred), and a collaborative culture focused on quality over volume pressure. Key features of this opportunity include: • Highly flexible scheduling options:, • Full-time structured schedules, • Part-time scheduled shifts, • Completely flexible "read-when-you-want" per-click / per-study model to fit your lifestyle and availability, • Highly flexible scheduling options: full-time structured schedules, part-time scheduled shifts, or a completely flexible "read-when-you-want" per-click / per-study model to fit your lifestyle and availability, • Specific structured options considered: Monday–Friday day shift with approximately 13 weekends annually; swing shift (e.g., 4pm–12am Eastern or similar); or alternative arrangements such as 7 on/7 off, 7 on/14 off, and others, • Access to a high-volume, diverse mix of advanced imaging cases with heavy neuro concentration across modalities like MRI and CT, • Comprehensive administrative and technical support to streamline your daily practice, • A long-standing reputation as one of the more experienced and respected independent practices in advanced imaging and radiology education, with national U.S. coverage and select international involvement, • Physician-owned structure that fosters independence and professional growth Ideal for neuroradiologists who value maximum control over their schedule, meaningful subspecialty case variety, and a team-oriented approach without high-pressure demands. If this aligns with your career goals, we'd be happy to provide more details about the practice and next steps in a confidential conversation.

Job DescriptionBroker/Owner (Real Estate) — Not a Job. Just a Conversation If you own a real estate brokerage, you already know…this business can feel heavy. Between overhead, recruiting, compliance, and keeping everything running day-to-day, it’s a constant balance between growth and stress. We’ve been having more conversations recently with broker/owners across the country who are in that exact spot. Not because things are going poorly, but because they’ve built something real and are starting to ask: “Is there a smarter way to run this?” Important — Please Read This is not a job posting. This is not a recruiting ad for agents. And it’s not a pitch to “sell your brokerage.” This is simply an opportunity to have a confidential conversation with another operator about what a potential partnership could look like. About Us We are an established, multi-state real estate brokerage actively expanding into new markets. We’ve built systems around recruiting, operations, and agent productivity that allow broker/owners to scale more efficiently, without carrying the full burden alone. We’re now having conversations with select independent brokerages to explore what alignment could look like. Who This Is For: • Broker/Owners of independent real estate firms, • Leaders managing 5–150 agents, • Brokerages experiencing plateaued growth or operational strain, • Owners thinking about scaling, simplifying, or long-term planning What Usually Comes Up in These Conversations Most owners we speak with aren’t looking to walk away. They’re looking for things like: • Reducing or eliminating overhead, • Taking operational weight off their plate, • Better systems and infrastructure for their agents, • A way to grow without doing everything themselves, • More flexibility in their role moving forward How This Works There is no one-size-fits-all structure. Every conversation is different. Sometimes it leads to: • A deeper partnership, • A merge or alignment, • Or simply a good conversation with no next steps There is no pressure and no expectation. Next Step If you're even slightly curious about how this might work, we'd welcome a confidential, no-pressure conversation. Submit your information and we'll reach out to schedule a brief introduction. All inquiries are kept strictly confidential.

Job Description Position Summary The Electrical Design Specialist is responsible for developing electrical wiring and interconnection documentation for industrial control and instrumentation systems after device selection and system architecture have been established by the project team. This role applies applicable electrical codes, client specifications, and industry standards to produce practical, compliant designs that support procurement, fabrication, and installation activities within a collaborative environment. This position works collaboratively across sales, engineering, procurement, and shop operations and may provide hands-on technical support and installation guidance as needed to meet project objectives. Key Responsibilities • Create one-line electrical wiring diagrams, interconnection drawings between instrumentation and terminal blocks, termination schedules, and cable schedules for control and instrumentation systems., • Develop wiring diagrams, junction box layout drawings, conduit/cable routing drawings, and electrical bills of material (BOMs) for customer submittals and internal manufacturing., • Assist marketing staff with quotations as needed., • Generate work instructions for installation of the electrical scope of supply., • Interpret and apply NEC, CSA, and ATEX requirements; client electrical specifications; and project-specific standards, with an emphasis on oil & gas and industrial facilities., • Select electrical interconnecting components, including:, • Wire and cable types, • Conduit systems and fittings, • Cable tray systems and routing concepts, • Cable glands, entry devices, and sealing systems, • Junction boxes and related accessories, • Review project documentation to ensure compliance with electrical codes, hazardous area requirements, and client preferences., • Develop bills of material (BOMs) for approval of items used in build and procurement of electrical components once client has approved., • Support shop fabrication and field installation activities by providing technical direction, clarification, and oversight as required., • Create inquiries to sub-suppliers for component selection and/or costing., • Perform installation reviews to verify conformance with drawings, specifications, and code requirements., • Manage order placement, expediting, and shipping coordination for all required electrical components., • Collaborate with project engineers, electricians, and other disciplines to efficiently resolve design and installation issues., • Maintain accurate project documentation, drawing revisions, and change records. Required Qualifications • Associate degree, technical diploma, or equivalent experience in electrical technology, industrial controls, or a related field., • Proven experience creating electrical wiring and interconnection drawings for industrial control systems., • Strong working knowledge of the National Electrical Code (NEC)., • Experience interpreting and applying client electrical specifications, preferably in oil & gas or heavy industrial environments., • Practical understanding of conduit systems, cable tray routing, and cable gland selection., • Ability to work across multiple functions in a collaborative team-based environment., • Exceptional customer-facing communication skills, with the ability to communicate clearly and professionally with clients, suppliers, and internal teams both verbally and in writing., • Experience working on large-scale, complex, and innovative projects, with the ability to review and apply project specifications., • Schedule-oriented, with strong multitasking skills and the ability to manage and execute multiple projects at various stages simultaneously., • Excellent judgment and decision-making skills; solution-oriented with the ability to resolve escalated issues., • Ability to comprehend customer requirements and make appropriate recommendations and briefings; capable of troubleshooting, testing, diagnosing errors or technical problems, and determining cost-effective solutions. Preferred Qualifications • Experience supporting manufacturing or system integration facilities., • Prior hands-on experience with electrical installation or field work., • Familiarity with electrical components used in industrial and hazardous area applications, including but not limited to conduit, cable tray, glands, terminal boxes, purge alarms, wiring and insulation types, and HOA switches., • Familiarity with oil & gas, petrochemical, or industrial facility standards., • Experience with electrical design software such as AutoCAD or similar tools.

Job DescriptionGTI is a contract manufacturing partner supporting customers in renewable energy, power generation, infrastructure, and industrial systems. We fabricate custom designed, purpose-built enclosures and skids for our customers and perform mechanical and electrical integration in-house, delivering a true turn-key product to our customers. Our scope spans Engineering, prototype builds, through full production, requiring teams that can move fast, adapt, and execute with precision. GTI Values: Safey I Quality I Customer Obsession I Speed I Agility Position Overview GTI Fabrication is seeking a Senior Mechanical Engineer with strong HVAC and thermal systems expertise to lead cooling system design and thermal integration across modular data centers, power systems, and industrial enclosure platforms. This role focuses on HVAC system architecture, equipment selection, airflow management, heat rejection, and integration of packaged cooling systems into highly constrained modular environments. This is not a traditional commercial building HVAC role focused solely on office buildings or facility infrastructure. GTI is specifically seeking engineers who understand how to design HVAC and cooling systems for enclosed equipment, modular systems, industrial infrastructure, and mission-critical applications where space constraints, manufacturability, vibration, acoustics, serviceability, and thermal performance must all be considered simultaneously. The ideal candidate has experience supporting modular data centers, telecom shelters, BESS systems, generator enclosures, industrial skids, electrical equipment rooms, or other enclosed industrial infrastructure requiring engineered thermal management solutions. Key Responsibilities HVAC System Design & Cooling Integration • Design and integrate HVAC and cooling systems for modular data centers, BESS enclosures, power systems, and industrial equipment platforms, • Size cooling systems based on actual equipment heat loads, environmental conditions, and operational requirements, • Develop airflow management strategies including supply/return air routing, intake/exhaust placement, ducting, plenum design, and thermal zoning, • Design systems for worst-case ambient conditions and full operational loading scenarios, • Select and integrate packaged HVAC equipment, CRAC/CRAH systems, DX units, chillers, heat exchangers, fans, ventilation systems, and thermal management components, • Support redundancy strategies and mission-critical cooling reliability requirements where applicable Mechanical Integration & Product Development • Own HVAC and thermal integration within modular enclosure designs and constrained equipment layouts, • Coordinate cooling system packaging with structural, electrical, and manufacturing constraints, • Develop 3D CAD models, layouts, mechanical assemblies, and engineering drawings using SolidWorks or similar platforms, • Design systems with strong focus on manufacturability, serviceability, maintenance access, and field installation efficiency, • Support integration of piping, condensate systems, ductwork, dampers, louvers, insulation, and thermal barriers Thermal Performance & Engineering Analysis • Perform thermal calculations, airflow analysis, psychrometric evaluations, and cooling load assessments, • Support CFD analysis and airflow validation activities where applicable, • Evaluate system performance across varying environmental and operational conditions, • Participate in prototype validation, heat runs, thermal testing, and troubleshooting activities, • Ensure designs meet reliability, operational uptime, and customer performance requirements Cross-Functional Collaboration • Partner closely with Electrical Engineering, Structural Engineering, Manufacturing Engineering, NPI, Quality, and Operations teams, • Work with manufacturing teams to ensure HVAC systems align with fabrication, assembly, and installation capabilities, • Support supplier selection, technical evaluations, and equipment integration activities, • Participate in customer technical discussions related to cooling system performance and thermal requirements Design for Manufacturing (DFM) & Operational Support • Drive DFM initiatives focused on scalable HVAC integration and modular production efficiency, • Standardize thermal system architectures and reusable cooling design strategies where possible, • Reduce installation complexity and improve serviceability across product platforms, • Support Root Cause Analysis for thermal performance issues, airflow problems, or cooling system failures Continuous Improvement & Technical Leadership • Contribute to HVAC design standards, engineering best practices, and thermal management guidelines, • Mentor junior engineers and support development of internal thermal engineering capability, • Support continuous improvement initiatives related to cooling performance, manufacturability, and product reliabilityRequirements Required Qualifications • Bachelor’s degree in Mechanical Engineering or related engineering discipline, • 6–12+ years of experience in HVAC system design, thermal systems engineering, or mechanical product development, • Experience designing HVAC and cooling systems for enclosed industrial systems or modular infrastructure products, • Strong understanding of cooling load calculations, airflow management, and thermal system integration, • Experience selecting and integrating packaged HVAC and thermal management equipment, • Strong knowledge of psychrometrics, heat transfer, airflow balancing, and thermal performance principles, • Proficiency with SolidWorks or similar 3D CAD platforms, • Strong understanding of manufacturability, enclosure integration, and industrial product design Preferred Qualifications • Experience supporting modular data centers, telecom shelters, BESS systems, or industrial power infrastructure, • Experience with CFD analysis, thermal modeling, or airflow simulation tool, • Familiarity with ASHRAE standards, UL requirements, and environmental testing standards, • Background in sheet metal, enclosure design, ducting systems, or industrial packaging, • Experience in contract manufacturing or engineered-to-order product environments, • Experience operating in high-growth industrial manufacturing environmentsBenefits & Perks GTI Energy offers a competitive compensation and benefits package designed to support employees and their families while providing long-term career growth opportunities within a fast-growing manufacturing organization. Benefits may include: • Medical, dental, and vision insurance, • 401(k) with company match (where applicable), • Paid Time Off (PTO) and paid holidays, • Sick time in accordance with state and local requirements, • Company-paid life insurance and disability coverage, • Career advancement opportunities within a rapidly growing organization, • Exposure to advanced manufacturing, modular infrastructure, and large-scale industrial projects, • Collaborative, fast-paced environment with strong operational and engineering leadership, • Employee-focused culture centered on safety, quality, accountability, and continuous improvement Benefits eligibility and offerings may vary based on position, location, and employment classification. GTI promotes a diverse and inclusive workforce and is an Equal Opportunity Employer that does not discriminate against employees or applicants for employment on the basis of race, color, national origin, ancestry, age, religion, sex, gender, gender identity, gender expression, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, marital status, or any other Federal or State legally-protected classes. We also value the safety of all employees and work hard to maintain a Drug Free Workplace. Privacy PolicyTerms & Conditions We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionGTI is a contract manufacturing partner supporting customers in renewable energy, power generation, infrastructure, and industrial systems. We fabricate custom designed, purpose-built enclosures and skids for our customers and perform mechanical and electrical integration in-house, delivering a true turn-key product to our customers. Our scope spans Engineering, prototype builds, through full production, requiring teams that can move fast, adapt, and execute with precision. GTI Values: Safey I Quality I Customer Obsession I Speed I Agility Position Overview GTI Energy is seeking a Mechanical Engineer to own the full mechanical design of generator systems from concept through production launch. This role is responsible for enclosure systems, base frames, fuel systems, airflow management, exhaust integration, and mechanical packaging into a manufacturable end product. The Mechanical Engineer will operate at the system level, not just component design. This role requires ownership of the physical product functioning as intended in real-world conditions while partnering cross-functionally with Electrical Engineering, Structural Engineering, Manufacturing, Supply Chain, Quality, and Operations. The ideal candidate combines strong mechanical design fundamentals with practical experience in tanks, fluid systems, thermal systems, sheet metal, weldments, and industrial equipment packaging. Key Responsibilities Generator System Design Ownership • Own full mechanical design of generator systems from concept, prototype, validation, and production release, • Develop integrated system layouts including enclosure, fuel systems, radiator systems, exhaust systems, service access, and structural packaging, • Ensure designs support manufacturability, installation, serviceability, lifting, transport, and long-term durability, • Operate as the primary mechanical owner of the complete generator product Enclosure, Base Frame & Structural Packaging • Design generator enclosures, skid bases, and structural frames that align with fabrication and assembly capabilities, • Develop layouts for component placement, maintenance access, airflow clearance, lifting points, and shipping requirements, • Design weldments, sheet metal assemblies, and bolted mechanical structures for production readiness, • Improve enclosure and frame designs to reduce rework, improve throughput, and enhance field installation success Fuel Systems Engineering • Own fuel system design end-to-end including subbase tanks, belly tanks, day tanks, and associated fuel delivery systems, • Design UL 142 compliant storage tanks including double-wall construction, leak detection, venting, fill systems, and containment features, • Size fuel systems to meet runtime requirements, customer specifications, and application demands, • Select pumps, filters, valves, sensors, level systems, and related hardware for reliable fuel system operation Piping, Fluids & Reliability Engineering • Define and route all fuel piping, tubing, hoses, and mechanical connections throughout the system, • Design for vibration resistance, thermal expansion, pressure integrity, and serviceabilit, • Ensure long-term reliability of fluid systems through proper component selection and installation methods, • Support troubleshooting of leaks, restrictions, pump issues, and field reliability concernsAirflow, Thermal & Cooling Performance, • Own generator airflow and thermal system performance including intake air, radiator integration, compartment cooling, and exhaust heat management, • Design airflow paths to ensure operation at worst-case ambient conditions without derating or overheating, • Evaluate fan performance, pressure drop, recirculation risks, and enclosure heat rejection, • Support thermal validation through testing, instrumentation, and real-world performance analysis Exhaust Systems & Emissions Integration • Design exhaust routing, silencers, flex sections, and thermal shielding while maintaining acceptable backpressure limits, • Coordinate packaging space and provisions for aftertreatment or emissions equipment where required, • Ensure exhaust systems meet thermal, durability, and service access requirements Manufacturing Integration & Design for Manufacturing • Drive manufacturable designs aligned with welding, fabrication, machining, paint, and final assembly capabilities, • Work directly with shop personnel to resolve fit-up, tolerance, and production issues quickly, • Improve designs based on production feedback to reduce labor hours, improve quality, and increase repeatability, • Support BOM accuracy, drawing quality, revision control, and release discipline Testing, Validation & Problem Solving • Participate in prototype builds, heat runs, system validation, and production troubleshooting, • Diagnose root causes of thermal, fuel, vibration, packaging, or durability issues and implement corrective actions, • Support continuous improvement through Root Cause Analysis, 5 Whys, and Fishbone methodologies, • Fix real-world issues through engineering ownership, not model-only updates Cross-Functional Collaboration • Partner with Electrical Engineering on controls, harness routing, battery systems, and integrated power components, • Coordinate with Supply Chain on sourced components, lead times, and alternate part qualification, • Support Quality and Operations teams during launch, production ramp, and field issue resolution, • Participate in customer design reviews and technical discussions when requiredRequirements Required Qualifications • Bachelor’s degree in Mechanical Engineering or related engineering discipline, • 5–10+ years of mechanical engineering experience in generator systems, industrial equipment, mobile equipment, power systems, HVAC, tanks, fluid systems, or similar hardware environments, • Experience designing weldments, sheet metal assemblies, mechanical packaging, and fabricated systems, • Strong understanding of fuel systems, piping, pumps, filters, valves, and fluid hardware integration, • Experience with thermal systems, airflow management, cooling systems, or heat rejection design, • Proficiency with CAD tools such as SolidWorks, Inventor, Creo, or similar platforms, • Strong ability to solve practical engineering problems in manufacturing environments Preferred Qualifications • Experience with diesel or natural gas generator systems, • Familiarity with UL 142 fuel tank requirements or related fuel storage standards, • Experience with modular data center power systems, standby power, or mission-critical infrastructure, • Background in fabrication-heavy or contract manufacturing environments, • Experience with FEA, CFD, or thermal modeling tools, • Exposure to Lean Manufacturing, Continuous Improvement, or new product introduction (NPI) processes Perks & Benefits GTI Energy offers a competitive compensation and benefits package designed to support employees and their families while providing long-term career growth opportunities within a fast-growing manufacturing organization. Benefits may include: • Medical, dental, and vision insurance, • 401(k) with company match (where applicable), • Paid Time Off (PTO) and paid holidays, • Sick time in accordance with state and local requirements, • Company-paid life insurance and disability coverage, • Career advancement opportunities within a rapidly growing organization, • Exposure to advanced manufacturing, modular infrastructure, and large-scale industrial projects, • Collaborative, fast-paced environment with strong operational and engineering leadership, • Employee-focused culture centered on safety, quality, accountability, and continuous improvement Benefits eligibility and offerings may vary based on position, location, and employment classification. GTI promotes a diverse and inclusive workforce and is an Equal Opportunity Employer that does not discriminate against employees or applicants for employment on the basis of race, color, national origin, ancestry, age, religion, sex, gender, gender identity, gender expression, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, marital status, or any other Federal or State legally-protected classes. We also value the safety of all employees and work hard to maintain a Drug Free Workplace. Privacy PolicyTerms & Conditions We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Position Summary This Electrical Engineering position manages the installation and maintenance of all electrical systems for H5 Data Centers and operations of specialized power systems. Act as an Engineering resource for the complete H5 portfolio of mission critical facilities. Responsible for Engineering standards, project scope definition, high level schematic design, engineering document review and construction support along with commissioning and turn-over to Operations. Maintains design and process documentation. Provides full life-cycle support to H5 Data Centers from concept design through site implementation and operations. Continuingly evaluate new and existing technologies for value. Some travel required. This position reports to the Senior Vice President. Essential Job Functions: • Participate in all aspects of electrical design and engineering including development of basis of design, scope of work, implementation processes and commissioning plans., • Work with internal teams and 3rd party engineering firms to select the right designs/equipment on projects/master plan including development of best standards., • Schedules and leads maintenance of national power systems to ensure 100% system availability., • Develops or reviews maintenance procedures for all power systems including detailed scripts for annual maintenance and projects., • Develop and manage processes and programs to ensure the health and efficiency of power systems within the data centers., • Be a subject matter expert on electrical items to help H5 effectively win new business., • Lead, review, and approve designs for data center upgrades which improve availability and efficiency, in addition to capacity increases and monitoring., • Support Operational teams in problem resolutions, Root Cause Analysis and design and process reviews., • Provide immediate technical support to operation teams during critical events, on-call., • Administers all aspects of the national electrical service agreements and vendors to ensure compliance., • Subject matter expert on electrical systems with customers effectively winning new business for H5 Data Centers., • Manages Electrical Sustainability program and utility power contracts and hedging. Qualifications: Education: • Bachelor’s degree in electrical engineering or equivalent experience. Experience: • Minimum 5 years in data center electrical design, commissioning, and critical system support., • Experience in Data Center design, construction and commissioning including high voltage substations, complex power distribution systems, Battery and back-up systems, automation, and control systems., • Experience reading, interpreting, and creating construction drawings, specifications, and submittal documents., • Understanding of data center electrical operations procedures, topologies (N+1, 2N, 3/ 2N, Catcher, etc.), equipment, switchgear and transformers, UPS, generators, etc., • Ability to refine electrical system designs for availability, quality control, constructability, and cost efficiency., • Understanding of both mechanical and electrical equipment and system design., • Project Manager experience is a plus. Skills and Abilities: • Effective oral and written communication skills, with top tier analytical and problem-solving abilities., • Organized, detailed and successful at setting priorities and meeting deadlines and budget., • Comprehensive use of AutoCAD, Visio, and Office software packages.

Job DescriptionGTI is a contract manufacturing partner supporting customers in renewable energy, power generation, infrastructure, and industrial systems. We fabricate custom designed, purpose-built enclosures and skids for our customers and perform mechanical and electrical integration in-house, delivering a true turn-key product to our customers. Our scope spans Engineering, prototype builds, through full production, requiring teams that can move fast, adapt, and execute with precision. GTI Values: Safey I Quality I Customer Obsession I Speed I Agility Position Overview GTI is seeking a Senior Mechanical Engineer to lead the design and development of modular power infrastructure systems. This role is responsible for the mechanical integration of generators, cooling systems, exhaust systems, structural assemblies, fuel systems, and enclosure platforms into factory-built modular solutions. The ideal candidate has experience designing complex industrial equipment and bringing products from concept through manufacturing and deployment. Key Responsibilities Generator System Design Ownership • Own full mechanical design of generator systems from concept, prototype, validation, and production release, • Develop integrated system layouts including enclosure, fuel systems, radiator systems, exhaust systems, service access, and structural packaging, • Ensure designs support manufacturability, installation, serviceability, lifting, transport, and long-term durability, • Operate as the primary mechanical owner of the complete generator product Enclosure, Base Frame & Structural Packaging • Design generator enclosures, skid bases, and structural frames that align with fabrication and assembly capabilities, • Develop layouts for component placement, maintenance access, airflow clearance, lifting points, and shipping requirements, • Design weldments, sheet metal assemblies, and bolted mechanical structures for production readiness, • Improve enclosure and frame designs to reduce rework, improve throughput, and enhance field installation success Fuel Systems Engineering • Own fuel system design end-to-end including subbase tanks, belly tanks, day tanks, and associated fuel delivery systems, • Design UL 142 compliant storage tanks including double-wall construction, leak detection, venting, fill systems, and containment features, • Size fuel systems to meet runtime requirements, customer specifications, and application demands, • Select pumps, filters, valves, sensors, level systems, and related hardware for reliable fuel system operation Piping, Fluids & Reliability Engineering • Define and route all fuel piping, tubing, hoses, and mechanical connections throughout the system, • Design for vibration resistance, thermal expansion, pressure integrity, and serviceability, • Ensure long-term reliability of fluid systems through proper component selection and installation methods, • Support troubleshooting of leaks, restrictions, pump issues, and field reliability concerns Airflow, Thermal & Cooling Performance • Own generator airflow and thermal system performance including intake air, radiator integration, compartment cooling, and exhaust heat management, • Design airflow paths to ensure operation at worst-case ambient conditions without derating or overheating, • Evaluate fan performance, pressure drop, recirculation risks, and enclosure heat rejection, • Support thermal validation through testing, instrumentation, and real-world performance analysis Exhaust Systems & Emissions Integration • Design exhaust routing, silencers, flex sections, and thermal shielding while maintaining acceptable backpressure limits, • Coordinate packaging space and provisions for aftertreatment or emissions equipment where required, • Ensure exhaust systems meet thermal, durability, and service access requirements Manufacturing Integration & Design for Manufacturing • Drive manufacturable designs aligned with welding, fabrication, machining, paint, and final assembly capabilities, • Work directly with shop personnel to resolve fit-up, tolerance, and production issues quickly, • Improve designs based on production feedback to reduce labor hours, improve quality, and increase repeatability, • Support BOM accuracy, drawing quality, revision control, and release discipline Testing, Validation & Problem Solving • Participate in prototype builds, heat runs, system validation, and production troubleshooting, • Diagnose root causes of thermal, fuel, vibration, packaging, or durability issues and implement corrective actions, • Support continuous improvement through Root Cause Analysis, 5 Whys, and Fishbone methodologies, • Fix real-world issues through engineering ownership, not model-only updates Cross-Functional Collaboration • Partner with Electrical Engineering on controls, harness routing, battery systems, and integrated power components, • Coordinate with Supply Chain on sourced components, lead times, and alternate part qualification, • Support Quality and Operations teams during launch, production ramp, and field issue resolution, • Participate in customer design reviews and technical discussions when requiredRequirements Required Qualifications • Bachelor’s degree in Mechanical Engineering or related engineering discipline, • 5–10+ years of mechanical engineering experience in generator systems, industrial equipment, mobile equipment, power systems, HVAC, tanks, fluid systems, or similar hardware environments, • Experience designing weldments, sheet metal assemblies, mechanical packaging, and fabricated systems, • Strong understanding of fuel systems, piping, pumps, filters, valves, and fluid hardware integration, • Experience with thermal systems, airflow management, cooling systems, or heat rejection design, • Proficiency with CAD tools such as SolidWorks, Inventor, Creo, or similar platform, • Strong ability to solve practical engineering problems in manufacturing environments Preferred Qualifications • Experience with diesel or natural gas generator systems, • Familiarity with UL 142 fuel tank requirements or related fuel storage standards, • Experience with modular data center power systems, standby power, or mission-critical infrastructure, • Background in fabrication-heavy or contract manufacturing environments, • Experience with FEA, CFD, or thermal modeling tools, • Exposure to Lean Manufacturing, Continuous Improvement, or new product introduction (NPI) processesBenefits & Perks GTI Energy offers a competitive compensation and benefits package designed to support employees and their families while providing long-term career growth opportunities within a fast-growing manufacturing organization. Benefits may include: • Medical, dental, and vision insurance, • 401(k) with company match (where applicable), • Paid Time Off (PTO) and paid holidays, • Sick time in accordance with state and local requirements, • Company-paid life insurance and disability coverage, • Career advancement opportunities within a rapidly growing organization, • Exposure to advanced manufacturing, modular infrastructure, and large-scale industrial projects, • Collaborative, fast-paced environment with strong operational and engineering leadership, • Employee-focused culture centered on safety, quality, accountability, and continuous improvement Benefits eligibility and offerings may vary based on position, location, and employment classification. GTI promotes a diverse and inclusive workforce and is an Equal Opportunity Employer that does not discriminate against employees or applicants for employment on the basis of race, color, national origin, ancestry, age, religion, sex, gender, gender identity, gender expression, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, marital status, or any other Federal or State legally-protected classes. We also value the safety of all employees and work hard to maintain a Drug Free Workplace. Privacy PolicyTerms & Conditions We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Mechanical Design Engineer Company Description My client, a large industrial equipment company that have customers in a wide variety of industries, are looking for a full-time Mechanical Design Engineer, at their site north of Buffalo, NY. This is an onsite position that is involved with the development and complete engineering definition of products for fabrication in conjunction with sales proposals and customer input that perform in an efficient and reliable manner while satisfying customer needs. Role responsibilities: • Maintain specific knowledge of project-specific engineering schedule and elevate potential issues with the schedule and/or foreseeable conflicts or delays to supervisor., • Have specific knowledge of project routings and elevate potential issues to supervisor., • Have a complete understanding of project specifications and customer expectations., • Read and interpret P&ID (Process and Instrumentation Diagrams)., • Identify discrepancies or lack of information in available project documentation to supervisor, • Select and source common mechanical components., • Develop complete definition of mechanical components for communication to vendor for purchasing., • Understand and adhere to product design standards and guidelines., • Create comprehensive 3D models to be used for design review and 2D fabrication drawing creation., • Understand and implement machine design practices including geometric dimensioning and tolerancing (GD&T), surface finishes, component fits., • Understand in-house fabrication and testing capabilities. Design products for manufacturability., • Produce shop-ready drawings and bills of material for fabrication with clear and concise information and details., • Understand and know how to apply common codes and standards ASME Piping and pressure Vessel code when required and seek support from Design Engineer for total compliance., • Manage multiple projects and balance requirements to keep all jobs on schedule., • Maintaining a dynamic array of tasks and the ability to prioritize through good time management skills. Requirements • Bachelor's degree in Mechanical Engineering or Mechanical Engineering Technology from a 4-year accredited college or university., • Experience with 3D modeling and 2D drafting using Autodesk Inventor (or similar 3D modeling software) design software and parametric modeling techniques., • Experience in complex equipment design., • Previous manufacturing floor and design exposure experience., • At least two years of experience in a similar design role. This role is paying an excellent basic salary in addition to a generous benefits package.

Job DescriptionDescription: Precast Design Engineer - Civil/Structural Join Our Team as a Precast Design Engineer – Innovate and Lead in Concrete Design Are you ready to take your engineering career to new heights? Fisher Associates is seeking a skilled Precast Design Engineer to join our dynamic team, where your expertise in designing precast concrete components will make an impact on diverse civil and structural projects. Join Fisher Associates and bring your talents to a team that values innovation, collaboration, and your unique contributions. Apply now to advance your career and play a key role in impactful projects within a supportive and dynamic environment! About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Precast Design Engineer • Lead and execute precast engineering and design tasks efficiently., • Collaborate with project teams to deliver structurally sound, cost-effective, and visually appealing precast concrete designs., • Perform and review structural analysis and calculations to ensure safety under various loads and conditions., • Select materials and components for precast concrete production that meet strength, durability, and sustainability standards., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Support cost estimation for materials, • Support Project Managers and Designers throughout the project lifecycle., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Guide and mentor junior staff.Requirements: What You Bring, Your Expertise as a Precast Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5 -10 years minimum Precast concrete design engineering experience, • Experience in precast concrete design engineering for transportation infrastructure and underground structures (utility vaults, manholes, drainage structures and pump stations) preferred, • Familiarity with ACI 318, ACI 350, ASCE-7, AASHTO, • Familiarity with IBC codes a plus, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in AutoCAD & RISA 3D, • Professional performance aligned with Fisher’s Mission, Vision, and Core Values, • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment., • Superior organizational and planning skills with keen attention to detail, • Curious and improvement-minded, embracing feedback and continuously seeking better solutions. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and leadership of multidisciplinary design teams., • Your voice matters in our inclusive culture, where accessible leadership welcomes ideas and feedback., • Your growth is our priority, supported by clear career paths and leadership opportunities., • You thrive in a culture that keeps work engaging and fosters a relaxed, easy-going atmosphere., • Your journey is supported by a team-driven environment that promotes mentorship and ongoing learning., • Your success is supported by a flexible work environment so you can thrive professionally and personally. What We Offer Your Impact Matters, Your Career Thrives. Create meaningful community impact through engaging precast engineering projects while advancing your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security, • Engage with a variety of employee groups focused on community, inclusion, and employee voice. Salary Range $83,000-$105,000 Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law. #LI-Hybrid

Job Description OVERVIEW OF POSITION: Performs functions to plan, coordinate, control and direct activities involving the requisitioning of Buffalo & Rubber products and the maintaining of effective inventory control records and system procedures. RESPONSIBILITIES OF THIS POSITION: • Analyze sales history and set appropriate line item forecasts, safety stocks and min/max inventory levels., • Utilize MRP and ERP generated reports to purchase material in support of those forecasts, min/max and safety stock levels for long lead time/variable lead time products., • Maintain MRP parameters within the ERP system to assure accurate ordering and rescheduling messages., • Control inventory levels to meet established goals while maintaining acceptable on-time delivery to customers., • Management and coordination of Open Orders., • Material management and allocation for large OEM using Buffalo products., • Management of the consigned inventory program., • Support inventory selection / allocation to ensure efficient use of material., • Maximize use of SM&O (Slow Moving & Obsolete), 2nd Class and aged material and cut pieces., • Provide timely response to Customer Care requests for all product requirements., • Maintain accurate delivery dates from suppliers and pro-actively communicate date changes to Customer Care., • Manage and direct elimination of scrap material., • Direct customer contact for purposes of selling SM&O, Cut Pieces, Stranded, etc., material., • Assist in production planning to ensure achievement of on-time goals., • Create and/or refine the existing procedures, processes and reports to streamline the planning/buying process., • Utilize supplier web sites to place orders and monitor the status of existing orders., • Maintain the Supplier Evaluation program and publish periodic updates to all approved suppliers., • Expedites material to proper department or storage location., • Conducts required cycle counts to ensure accuracy of inventory., • Assist shipping department by identifying work procedures, prepare work schedules and expedite workflow., • Confers with department supervisors to determine overdue materials, parts and notifies of material status., • Respond to Customer Service requests to purchase non standard products to support customer of, • demand., • Work with brokers and freight forwarders to assure proper filing of paperwork and timely delivery of, • Shipments., • Order non-standard parts/supplies from affiliates., • Maintain / track in-transit shipments., • Verify receipts and proper billing on invoices from vendors., • Work with the receiving department to assure that goods are received properly., • Perform Account Management of select House Accounts., • Planning all profiles; cleats, guides, sidewalls., • Performs functions to plan, coordinate, control and direct activities involving production scheduling, release of work orders and delivery promises.

Job DescriptionDescription: JOB SUMMARY The Community Manager is responsible for day-to-day operations including leasing, marketing, financial reporting, appearance, and good working order of the assigned properties within the portfolio. Focus on maximizing the financial returns from the property in accordance with the owner's objectives and maintaining the integrity of the physical assets with purposeful capital expenditure planning and routine preventive maintenance performance. Responsible for the recruitment, selection, training and supervision of all on-site personnel. Assists the District Manager, and/or other management team members with special projects, administrative tasks, and other non-property management related work, to achieve the goals of the company, including but not limited to marketing, leasing and operations. ESSENTIAL DUTIES Maintaining the physical asset: • Recruit, select, train, and supervise site maintenance staff. Develop priorities for site upkeep and development of a preventative maintenance program., • Delegate and/or monitor day to day maintenance work, and completion of all items identified on the annual preventive maintenance schedule prepared for each site., • Complete regular inspections and follow-up on emergency and routine maintenance work, capital improvements, and turnovers both commercial and residential., • Select, supervise, and review all contractual services., • Confirm all vacant units/areas are ready to lease, and tenant requests are completed in accordance with company policy., • Regularly inspects grounds, interior hallways, and all common hallways., • Approve expenditures for all maintenance and cleaning supplies, materials, and equipment., • Make recommendations for physical repairs and/or replacements and coordinates major capital improvements for budget review., • Perform inspections and review punch lists following completion of major repairs, maintenance or renovations. Marketing and leasing: • Recruit, select, train, and supervise site and/or leasing personnel if applicable at assigned properties., • Actively manages all advertising, marketing, and social media initiatives., • Analyze rental trends, prepare competition studies, and implement marketing plans based on rental trends. Track effectiveness of marketing to maintain high occupancy, • Responsible for resident/client retention, including renewals, and re-leasing potential vacancies with focus on minimizing loss of rental income. Financial monitoring and control: • Responsible for timely collection and processing of rent including administration of late rent, court proceedings and recovering delinquent balances in accordance with law and company policy, • Project future budgetary needs, develop plans, and supervise implementation of the budget., • Prepare individual property budgets for assigned properties in line with stated company timelines., • Review monthly income statements and prepares explanations of variances., • Process and/or approve all accounts payables for disbursement in accordance with stated company policy., • Approve time & attendance including overtime for site staff in accordance with stated company timelines. Administration: • Prepare annual management plan to correspond with annual budget for properties assigned. Provide specific financial, physical & administrative objectives., • Ensure property files, leases and records are maintained in compliance with company, local, state or federal requirements., • Responsible for enforcement of lease and lease terms, • Work with site staff to deal with any emergencies that may arise on site; notify District Manager with serious emergencies. Prepare contingency plans to respond "crisis" situations that may arise., • Communicates all problems and makes recommendations to District Manager Requirements: Required Education & Experience: High School Diploma required, associate or bachelor’s degree preferred. 3+ years previous experience as a multi-family apartment community manager with proven success in marketing, leasing management of community operations at a high level. Excellent communication skills; Microsoft Word and Excel ability. RealPage experience is a plus. Must be able to respond to emergency calls and issues after regular business hours. Required Competencies & Skills: • Proficient with Microsoft Office Suite or similar software, and cloud-based ERP software with ability to navigate computer system data quickly and efficiently. Prior experience with RealPage a plus., • Excellent analytical and problem-solving skills with ability to think & manage in a strategic manner., • Detail oriented with high level of accountability, accuracy, and efficiency, especially when multitasking., • Ability to manage a team and direct day to day activities & tasks., • Ethical conduct, integrity, and trust., • Excellent verbal and written communication, interpersonal, time management, problem-solving and math skills., • Adaptability through periods of change and growth., • Ability to multitask based on prioritization and time sensitivity., • Ability to manage multiple priorities and possess excellent follow through skills. Work Environment An individual working in this role will sit at a desk and use office equipment such as a computer, phone, photocopiers/scanners, and other peripherals. The position will also require the individual to stand, walk, use hands, reach with hands and arms, bend, and squat. The noise level in the work environment is usually moderate. This position may require lifting up to 20 pounds. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Valid Driver’s License and reliable transportation required to travel within in a 100-mile radius to locations within the portfolio.

Job DescriptionDescription: Carrier Process Equipment Group (CPEG) offers customers a comprehensive line of large industrial processing equipment for a wide variety of industries. By combining engineering expertise including high tolerance fabrication and assembly, we design and manufacture custom bulk processing equipment solutions. Please visit us at https://www.cpeg.com/ to see the full scale of our product lines and solutions including the diverse family of brands who make up our portfolio. We are looking for a full-time Mechanical Design Engineer at our Tonawanda, NY location. This is an onsite position that is involved with the development and complete engineering definition of products for fabrication in conjunction with sales proposals and customer input that perform in an efficient and reliable manner while satisfying customer needs. Responsibilities • Maintain specific knowledge of project-specific engineering schedule and elevate potential issues with the schedule and/or foreseeable conflicts or delays to supervisor, • Have specific knowledge of project routings and elevate potential issues to supervisor, • Actively participate in project kick-off meetings, • Have a complete understanding of project specifications and customer expectations., • Read and interpret P&ID (Process and Instrumentation Diagrams), • Identify discrepancies or lack of information in available project documentation to supervisor, • Understand and adhere to product design standards and guidelines, • Select and source common mechanical components, • Develop complete definition of mechanical components for communication to vendor for purchasing, • Create comprehensive 3D models to be used for design review and 2D fabrication drawing creation, • Understand and implement machine design practices including geometric dimensioning and tolerancing (GD&T), surface finishes, component fits, • Understand in-house fabrication and testing capabilities. Design products for manufacturability, • Utilize Syteline ERP as required throughout project, • Produce shop-ready drawings and bills of material for fabrication with clear and concise information and details, • Support production during fabrication and assembly phases of projects, • Identify Bill of Materials for product designs and select the proper components that meet the customer specifications, • Collect as-built information as required and track design updates to implement on future projects, • Understand and know how to apply common codes and standards ASME Piping and pressure Vessel code when required and seek support from Design Engineer for total compliance, • Manage multiple projects and balance requirements to keep all jobs on schedule, • Maintaining a dynamic array of tasks and the ability to prioritize through good time management skills, • Work with Project Engineers in a team environment to create conceptual designs to support sales and detailed designs as required Requirements: • Bachelor's degree in Mechanical Engineering or Mechanical Engineering Technology from a 4-year accredited college or university, • Experience with 3D modeling and 2D drafting using Autodesk Inventor (or similar 3D modeling software) design software and parametric modeling techniques, • Experience in complex custom equipment design, • Previous manufacturing floor and design exposure is a plus, • Two (2) years of fulltime verifiable experience in the field Competitive Benefits • Generous paid time off as well as 80 hours of holiday pay each year., • Ability to become an Employee Owner. This benefit is fully funded by the company—no employee contribution required—and builds value for you over time based on the company's performance. While results vary from year to year, the ESOP consistently delivers retirement benefits that exceed those of a typical 401(k) match., • Medical, Dental, and Vision Insurance. We provide a company contribution with Health Savings Account (HSA) participation. Flexible Spending Accounts (FSAs) are also available for healthcare and dependent care expenses, regardless of whether you are enrolled in a company medical plan., • Company paid Basic Life Insurance, Accidental Death & Dismemberment (AD&D), and Long-Term Disability coverage, along with supplemental Short-Term Disability coverage (company pays 50% of premium)., • Voluntary coverages such as additional life insurance, accident insurance and more., • Employee Assistance Program. Our EAP offers free, confidential support including legal and financial consultations, counseling services, estate planning, travel assistance, and work-life resources such as childcare, eldercare, and health advocacy., • Employee Referral Program bonus., • Educational Assistance., • Career Advancement. CPEG is 100% employee-owned and led by a dynamic executive team of talented individuals who have risen through the management structure., • Option to contribute to a 401(k) plan with flexible loan feature—invest in your future while keeping access to your funds if you need them., • Cash Balance Pension Plan. We contribute to this retirement savings on your behalf—no employee contribution required. Combined with a guaranteed 4% rate of return, this means you receive a consistent and valuable retirement benefit every year. CPEG Buffalo LLC is an equal opportunity organization. We recruit, employ, train, compensate, and promote without regard to actual or perceived: race (including traits historically associated with race, such as hair texture and protective hairstyles), color, creed, religion (including wearing attire, clothing or facial hair in accordance with the tenets of religion), sex (including pregnancy, childbirth or related medical conditions and transgender status), gender identity or expression, reproductive health decisions, familial status, national origin, physical or mental disability (including gender dysphoria and being a certified medical marijuana patient), genetic information (including predisposing genetic characteristics), age (18 and over), veteran status, military status, sexual orientation, marital status, certain arrest or conviction records, domestic violence victim status and any other status protected by law. *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position’s qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays.

Job DescriptionJob Title: Commercial Lines Account Executive | Client Service ManagerSalary: $80,000 - $95,000 plus comprehensive health benefitsLocation: Buffalo, NY Job Summary: As a Commercial Lines Account Executive or Client Relationship Manager in our dynamic insurance team, you'll act as a primary agent for Producer assigned accounts. This role involves both servicing and solicitation activities. You'll manage a mid-market book of business and lead a dedicated service team, ensuring high-quality client management and business growth. Key Responsibilities: • Independently manage client services and maintain relationships with minimal oversight from Producers., • Direct a service team to manage a mid-market book of business effectively., • Participating in interviews and responding to RFPs., • Analyze and present renewal options to clients, selling renewal business and additional coverage lines., • Promote various services offered by our agency through tailored Producer Service Proposals., • Provide expert analysis and recommendations on clients' existing coverage plans., • Select carriers for solicitation, negotiating beneficial terms and premiums., • Address and resolve client inquiries, including benefits and claims issues., • Review and ensure the accuracy of client coverage contracts and amendments., • Manage and negotiate contracts with third-party vendors on behalf of clients., • Oversee and support a dedicated service team.Qualifications:, • Bachelor’s degree or an equivalent combination of education and experience., • 5-7 years of relevant work experience in the insurance field., • Designations are a plus CIC, CISR, CSRM, AAISkills:, • Exceptional verbal and written communication abilities., • Strong problem-solving and time management skills., • Teamwork-oriented mindset., • Proficient in planning, organization, and prioritization., • Well-versed in Microsoft Office Suite, AMS360 or Applied TAM/EPIC.Salary Context: The national average salary for similar roles ranges from $75,000 to $95,000 , excluding bonuses or benefits. The offered base pay will be determined based on experience, skills, certifications, education, and in consideration of internal equity and market data.

Job DescriptionGTI is a contract manufacturing partner supporting customers in renewable energy, power generation, infrastructure, and industrial systems. We fabricate custom designed, purpose-built enclosures and skids for our customers and perform mechanical and electrical integration in-house, delivering a true turn-key product to our customers. Our scope spans Engineering, prototype builds, through full production, requiring teams that can move fast, adapt, and execute with precision. GTI Values: Safey I Quality I Customer Obsession I Speed I Agility Position Overview GTI is seeking an Industrial Painter to support manufacturing operations at our Buffalo, NY facility on 1st shift. This role is responsible for surface preparation, coating application, and quality execution on fabricated metal components and assemblies. The Industrial Painter plays a critical role in ensuring finished products meet quality, durability, and customer standards. Key Responsibilities • Clean, prep, and paint fabricated metal substrates, • Prepare surfaces for coating in accordance with product data sheets and specifications, • Select, mix, and apply primers, epoxies, and topcoats, • Apply coatings using airless and conventional spray equipment, • Ensure finished work meets GTI quality standards and customer requirements, • Monitor coating quality, coverage, and finish consistency, • Maintain clean and organized work areas and equipment, • Perform proper cleanup of spray equipment and workspaces, • Follow safety procedures and material handling requirementsRequirements, • Minimum 2 years of experience in industrial or OEM painting, • Working knowledge of airless and conventional spray systems, • Basic understanding of abrasive blasting and surface preparation techniques, • Familiarity with two-component primers, epoxies, and topcoats including mixing, thinning, and cleanup, • Ability to follow work instructions, safety guidelines, and quality standards Preferred Qualifications • 5+ years of experience in industrial or OEM painting, • Strong experience with metal surface preparation and cleaning, • Strong understanding of setup, use, and maintenance of spray equipment, • Working knowledge of product data sheets and safety data sheets, • Experience checking coating thickness and recording measurements on daily logsBenefits & Perks GTI Energy offers a competitive compensation and benefits package designed to support employees and their families while providing long-term career growth opportunities within a fast-growing manufacturing organization. Benefits may include: • Medical, dental, and vision insurance, • 401(k) with company match (where applicable), • Paid Time Off (PTO) and paid holidays, • Sick time in accordance with state and local requirements, • Company-paid life insurance and disability coverage, • Career advancement opportunities within a rapidly growing organization, • Exposure to advanced manufacturing, modular infrastructure, and large-scale industrial projects, • Collaborative, fast-paced environment with strong operational and engineering leadership, • Employee-focused culture centered on safety, quality, accountability, and continuous improvement Benefits eligibility and offerings may vary based on position, location, and employment classification. GTI promotes a diverse and inclusive workforce and is an Equal Opportunity Employer that does not discriminate against employees or applicants for employment on the basis of race, color, national origin, ancestry, age, religion, sex, gender, gender identity, gender expression, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, marital status, or any other Federal or State legally-protected classes. We also value the safety of all employees and work hard to maintain a Drug Free Workplace. Privacy PolicyTerms & Conditions We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

OVERVIEW: Our client, a Global Fortune 50 organization and one of world’s largest distributors of Health care systems, medical supplies & Pharmaceutical products, seeks an accomplished “Warehouse/ Pharmacy Clerk – Part Time” Position: Warehouse/ Pharmacy Clerk [Part-Time role!!!] Location: Cheektowaga, NY Duration: 2-4 months+ temp-to-hire!!! Pay rate: $17.50/hr Note: • ONSITE role, • Any pharmacy tech work or warehouse experience is preferred, • Work schedule: 4 days in a week, Sun, Mon, Wed, Fri, • The schedule is Sunday: 9am-5:30pm, • Monday: 9am-2pm, • Wednesday: 9am-2pm, • Friday: 9am-5:30pm, • Plus, mandatory overtime JOB DESCRIPTION: The ideal candidate will be able to fill prescription requests accurately and efficiently in an automated refill setting. Under the supervision of a Pharmacist, the Pharmacy Support Associate prepares, packages, sorts and distributes medications in a fast-paced production environment. Maintains continuous, consistent workflow in order to meet daily production goals; and has the ability to work productively independently or in a team environment. • HS diploma/GED or equivalent experience, • Able to lift up to 30lbs. Able to select and lift objects from shelves and carry to order filling line. Able to consistently carry 20 – 30 lbs. of merchandise., • Standing/walking continuously during the shift (8+hours per day), • Requires bending, twisting, reaching, grasping and pinching., • Basic math, reading and writing skills required., • Visual acuity to read computer screens, handheld scanners and labels Job Duties / Requirements • Manually fill prescription vials with prescribed tablets and capsules. Retrieve and process Unit of Use and Bulk items, • Read computer generated screens to find indicated medication on labeled shelves, verify size and strength of the product before filling order, • Replenish medication in automated cells to full capacity; opening large quantities of bottles and cases of product., • Basic mathematical reasoning to either count or calculate appropriate number of units needed to fill prescription., • Use of handheld scanner unit to scan barcodes of product for replenishment., • Demonstrate problem resolution skills: ability to recognize, address and escalate issues, • Maintain focus and acute attention to detail while performing repetitive tasks with absolute accuracy., • Maintains the pharmacy floor in a clean and orderly condition., • Understands and abides by federal and state HIPAA laws as well as pharmacy standard procedures to ensure patient safety and privacy., • Processes orders for shipping including folding/packing paperwork and attaching shipping label., • Ability to fill, pack and ship prescriptions with 100% accuracy and efficiency using Standard Operating Procedures (SOP) and McKesson supported hardware and software., • Also responsible for housekeeping and other duties as assigned., • Adheres to and promotes the Company’s Shared ICARE Principles, • Mandatory overtime required based on business need. I'd love to talk to you if you think this position is right up your alley, and assure prompt communication, whichever direction. If you're looking for rewarding employment and a company that puts its employees first, we'd like to work with you. Recruiter Name: Gurjant " Gary" Singh Title: Lead Recruiter Email ID: gurjant.singh@ameritconsulting.com Company Overview: Amerit Consulting is an extremely fast-growing staffing and consulting firm. Amerit Consulting was founded in 2002 to provide consulting, temporary staffing, direct hire, and payrolling services to Fortune 500 companies nationally; as well as small to mid-sized organizations on a local & regional level. Currently, Amerit has over 2,000 employees in 47 states. We develop and implement solutions that help our clients operate more efficiently, deliver greater customer satisfaction, and see a positive impact on their bottom line. We create value by bringing together the right people to achieve results. Our clients and employees say they choose to work with Amerit because of how we work with them - with service that exceeds their expectations and a personal commitment to their success. Our deep expertise in human capital management has fueled our expansion into direct hire placements, temporary staffing, contract placements, and additional staffing and consulting services that propel our clients’ businesses forward. Amerit Consulting provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants with criminal histories are considered in a manner that is consistent with local, state and federal laws.

Shaner Hotels has an amazing opportunity at our 205 room Buffalo Marriott LECOM HARBORCENTER. Located off I-190 in downtown Buffalo's Canalside Entertainment District, the Buffalo Marriott LECOM HARBORCENTER is attached to Key Bank Center, the home of the NHL Buffalo Sabres. Niagara Falls, a natural wonder of the world, is just a short drive away. This hotel features modern rooms, elegant meeting space and a seventh-floor restaurant and bar offering stunning views of Lake Erie and the Buffalo skyline. Shaner Hotel Group Shaner Hotels is one of the foremost award-winning hospitality owner-operators and management companies in the hospitality industry. Our current portfolio consists of over 65 full-service, select-service, extended-stay and resort properties with more than 7,500 rooms in 14 states and four countries. We partner with the top Hospitality Brands including independent locations as well. We provide a variety of services for investors, hotel owners and brands-including hotel development, design and construction, e-commerce, and revenue management. You can find out more by visiting our website, _! • Be available to work overnights (11p-730a), including weekends and holidays, • Handle guest complaints ensuring guest satisfaction., • Maintains standards of quality and cleanliness throughout daily assignments., • Observes all house and safety rules, departmental procedures, and security procedures., • Assist with inventories as scheduled., • Follow maintenance program and cleaning schedule., • Other duties as assigned.Responsibilities The Overnight Maintenance Engineer will be responsible for upkeep, preventative maintenance and troubleshooting with ice machines, refrigeration units, and air handling units, as well as other general maintenance, in accordance with the standards of Shaner Hotels and the respective franchises. The ideal applicant will be customer service oriented and willing to go the extra mile to make the guest experience one to remember. Requires a strong background in commercial refrigeration and knowledge of ice machines, industrial chiller systems, and air handling units. Also requires basic working knowledge of general maintenance procedures. Full time position with benefits. Weekend, and holiday hours may be required. Qualifications, • Minimum of two years of experience preferably in a hotel; franchised hotel experience a plus. Knowledge of all mechanical equipment critical to the operation of the building; proper chemical handling and disposal., • Ability to prioritize tasks and comply with deadlines for work assignments., • Ability to interact positively with hotel personnel and provide prompt solutions to problems., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedural manuals., • Valid driver's license and clean driving record required. Job Type: Full/Part-time Pay: $25.00 per hour Benefits: • Health insurance, • Paid time off, • 8 Paid holidays, • Marriott Hotel Discounts, • 2 Complimentary night hotel stays per year at any Shaner Hotel property, • 1 Complimentary meal per shift worked, • Located on bus and metro routes. Work Location: In person

Job Description Job Description: Derrick Corporation is seeking Welders to join our team! You will be responsible for fabricating, assembling, and repairing metal components with precision. You’ll read blueprints, operate welding equipment (MIG/TIG/Stick), and ensure top‑quality, safe results on every project. Technical skill, attention to detail, and a commitment to safety are a must. Welding certification is preferred. At Derrick Corporation, our journey began over seven decades ago when H. William Derrick Jr. laid the foundation in 1951 in Buffalo, NY for a legacy that now stretches across the globe. Today, we proudly stand as a third-generation, family-owned and operated organization with over 600 associates worldwide. This year, 2026 marks our 75th year in operation, which speaks to our enduring legacy and global presence. Responsibilities: • Measure, cut, and shape metal components using hand tools, plasma cutters, or metal-cutting machines, • Interpret blueprints & CAD drawings to determine project requirements, • Familiarity working with multiple filler metals and shielding gas, • Perform welding operations (MIG, TIG, Stick, or other techniques) to join metal parts, • Set up, operate, and maintain welding equipment safely and efficiently, • Inspect and test welds to ensure compliance with design specifications and safety standards, • Apply knowledge of metallurgy and material properties to select appropriate welding methods, • Maintain a clean, organized, and safe work environment Qualifications: • High school diploma or GED, • Vocational/technical welding training preferred, • Ability to pass WQTR (Welder Qualification Test Record) test specific to various Derrick welding procedures, • Understanding of basic welding processes: GMAW, GTAW, and FCAW, • Mechanical aptitude to utilize hand and power tools, • Ability to lift up to 50 pounds on your own, • Ability to work in various roles and environments, sometimes under challenging conditions, • Knowledge of safety protocols and relevant building codes, • Teamwork skills, • Positive attitude, • Driver’s License highly preferred Derrick Corporation has a standard work week of 47.5 hours

Shaner Hotels has an amazing opportunity at our 205 room Buffalo Marriott LECOM HARBORCENTER. Located off I-190 in downtown Buffalo's Canalside Entertainment District, the Buffalo Marriott LECOM HARBORCENTER is attached to Key Bank Center, the home of the NHL Buffalo Sabres. Niagara Falls, a natural wonder of the world, is just a short drive away. This hotel features modern rooms, elegant meeting space and a seventh-floor restaurant and bar offering stunning views of Lake Erie and the Buffalo skyline. Shaner Hotel Group Shaner Hotels is one of the foremost award-winning hospitality owner-operators and management companies in the hospitality industry. Our current portfolio consists of over 65 full-service, select-service, extended-stay and resort properties with more than 7,500 rooms in 14 states and four countries. We partner with the top Hospitality Brands including independent locations as well. We provide a variety of services for investors, hotel owners and brands-including hotel development, design and construction, e-commerce, and revenue management. You can find out more by visiting our website, _! • Be available to work a flexible schedule, including weekends, holidays, and varied shifts., • Maintain and strictly abide by state sanitation/health regulations and hotel requirements., • Maintain complete knowledge of correct maintenance and use of equipment; use equipment and tools only as intended, properly and safely., • Use correct cleaning chemicals for designated items, according to OSHA regulations and hotel requirements.Responsibilities:Adhere to hotel specifications and standards in operating the dishwashing machine to wash designated restaurant and kitchen wares, clean and maintain equipment and respective areas. Wash pots, pans, and other kitchen utensils/equipment. Qualifications: • Prior experience preferred., • Ability to count., • Knowledge of proper chemical handling., • Ability to satisfactorily communicate with management and co-workers to their understanding., • Physical strength and stamina to spend long hours standing and performing repetitive motions. Job Type: Part-time and Full-time Pay: Starting at $16.50 per hour. Work Location: In person Benefits: • Health insurance, • Paid time off, • 8 Paid holidays, • Marriott Hotel Discounts, • 2 Complimentary night hotel stays per year at any Shaner Hotel property, • 1 Complimentary meal per shift worked, • Located on bus and metro routes.