Software tester jobs in Philadelphia, PennsylvaniaCrear alertas

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Auto and Diesel Technician to support our Truck Fleet in Philadelphia, PA For More Info Call Jordon or Text "Philadelphia PA" to 904-869-3454 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $45.00 per hour, • Retention Bonus: $2000 paid every quarter within the first year, • Schedule: Flexible 40-hour work week (weekend premiums apply) Tuesday-Saturday, • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks. For More Info Call Jordon or Text "Philadelphia PA" to 904-869-3454 At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Four (4) years or more Relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Four (4) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Decision making: Responsible for making decisions surrounding vehicle diagnostics and repair, • Performs vehicle maintenance and repair duties including: standard vehicle maintenance, preventive maintenance, complex repairs with minimal (if any) support, • Demonstrate the ability to access and use internal and external maintenance documents - Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable, • Performs remote triage to with RCRC and customers to determine best solution to assist roadside breakdowns, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task, • Instructs and advises other technicians regarding maintenance repair procedures and diagnostics, • Interact with non-contractual customers, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements. Posted Date 3 hours ago (1/2/2026 5:04 PM) Requisition ID 2026-193628 Location (Posting Location) : State/Province PA Location (Posting Location) : City Philadelphia Location (Posting Location) : Postal Code 19114 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001374 Min Pay USD $45.00/Hr. Max Pay USD $45.00/Hr.

Position Description Torque by Ryder is immediately hiring a Permanent Full Time Experienced Mobile Diesel Technician to support our Truck Fleet in Philadelphia, PA For More Info Call Jordon or Text "Philadelphia PA" to 904-869-3454 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $43.00 per hour, • Retention Bonus: $2000 paid every quarter within the first year, • Schedule: Flexible 40-hour work week (weekend premiums apply) Tuesday-Saturday, • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks. At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Apply today and see why a job with Ryder is what you’ve been looking for. Call us or go online to apply to one of our career opportunities Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Three (3) years or more relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 3 hours ago (1/2/2026 4:58 PM) Requisition ID 2026-193624 Location (Posting Location) : State/Province PA Location (Posting Location) : City Philadelphia Location (Posting Location) : Postal Code 19114 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001311 Min Pay USD $43.00/Hr. Max Pay USD $43.00/Hr.

Job DescriptionSalary: Cornelis Networks delivers the worlds highest performance scale-out networking solutions for AI and HPC datacenters. Our differentiated architecture seamlessly integrates hardware, software and system level technologies to maximize the efficiency of GPU, CPU and accelerator-based compute clusters at any scale. Our solutions drive breakthroughs in AI & HPC workloads, empowering our customers to push the boundaries of innovation. Backed by top-tier venture capital and strategic investors, we are committed to innovation, performance and scalability - solving the worlds most demanding computational challenges with our next-generation networking solutions. We are a fast-growing, forward-thinking team of architects, engineers, and business professionals with a proven track record of building successful products and companies. As a global organization, our team spans multiple U.S. states and six countries, and we continue to expand with exceptional talent in onsite, hybrid, and fully remote roles. Cornelis Networks is hiring a talented Signal Integrity (SI) Engineer with some experience in system and printed circuit board (PCB) development and design. The SI engineer will be involved in the high-speed interface design, from conception through end-of-life, of the next generation Cornelis Networks Fabric platforms. Key Responsibilities: • Perform SI simulation including modeling, pre/post-data processing and analysis, • Support high-speed interface interconnects/channel simulation and analysis, • Work in lab with various equipment to perform SI measurements, SerDes test, cable evaluation and qualification, and correlation of the measurements with the SI simulations, • Provide design guidelines for platforms based on simulation and 3D modeling activities, • Review platform designs to ensure that signal paths are laid out to meet design specifications for high-speed interfaces such as PCIe and Ethernet., • Work with platform mechanical, electrical design, software, system test, and manufacturing teams to assist in moving the product into production Minimum qualifications: • 3+ years of experience in the usage of electromagnetic (EM) simulation tools, • BS or MS in Electrical Engineering, Computer Engineering or Electrical and Computer Engineering, • Understand transmission line theory and electromagnetic (EM) field concepts such as S-parameter and impedance match, • Knowledge of SI fundamentals in modeling complex structures such as packages, BGA, connectors, and PCB boards, • Scripting languages such as Matlab and Python, • Develop technical documents, including design guidelines and simulation/test correlation reports, • Strong communication and interpersonal skills Preferred qualifications: • 2D/3D EM field solver tools, such as Ansys HFSS, CST, Sigrity, or Keysight SI/PI/EM Pro, • Channel simulation tools for frequency domain and time domain analysis such as Keysight ADS, • High-speed interface design and analysis concepts, such as PCIe, Ethernet IEEE802.3, etc., • Hand-on experience for lab equipment such as Oscilloscope, Vector Network Analyzer (VNA), Bit Error Rate Tester (BERT), Time Domain Reflectometry (TDR), etc., • The concepts of PCB layout, which may include experience with tools such as Candence Allegro PCB designer or other PCB designer tools, • Strong problem-solving and analytical skills to diagnose and resolve SI/PI failures, • Knowledge of optical and active copper cable technologies is a plus Location: This position follows a hybrid work model and is based at the Chesterbrook Corporate Center in Wayne, PA. The ideal candidate will reside within a reasonable commuting distance. We offer a competitive compensation package that includes equity, cash, and incentives, along with health and retirement benefits. Our dynamic, flexible work environment provides the opportunity to collaborate with some of the most influential names in the semiconductor industry. At Cornelis Networks your base salary is only one component of your comprehensive total rewards package. Your base pay will be determined by factors such as your skills, qualifications, experience, and location relative to the hiring range for the position. Depending on your role, you may also be eligible for performance-based incentives, including an annual bonus or sales incentives. In addition to your base pay, youll have access to a broad range of benefits, including medical, dental, and vision coverage, as well as disability and life insurance, a dependent care flexible spending account, accidental injury insurance, and pet insurance. We also offer generous paid holidays, 401(k) with company match, and Open Time Off (OTO) for regular full-time exempt employees. Other paid time off benefits include sick time, bonding leave, and pregnancy disability leave. Cornelis Networks does not accept unsolicited resumes from headhunters, recruitment agencies, or fee-based recruitment services. Cornelis Networks is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. We encourage applications from all qualified candidates and will accommodate applicants needs under the respective laws throughout all stages of the recruitment and selection process.

Job Description We are looking for a Test Automation Lead to assess software quality through manual and automated testing. You will be responsible for finding and reporting bugs and glitches. In this role, you should have a keen eye for detail and excellent communication skills. If you are also competent in executing test cases and are passionate about quality, we’d like to meet you. Ultimately, you will ensure that our products, applications and systems work correctly. Responsibilities • Review and analyze system specifications, • Collaborate with the Application Development team to develop effective strategies and test plans, • Execute test cases (manual or automated) and analyze results, • Evaluate product code according to specifications, • Create logs to document testing phases and defects, • Report bugs and errors to development teams, • Help troubleshoot issues, • Conduct post-release/ post-implementation testing, • Work with cross-functional teams to ensure quality throughout the software development lifecycle Requirements • 6 years of relevant and progressive software development/testing, systems engineering and/or architecture experience., • Strong hands-on automation tester with experience working on different automation frameworks., • Exposure to Testing open shift application, • Knowledge and experience with Microsoft TFS Azure DevOps, • Knowledge and experience with Agile development and testing, • Strong written and verbal communication skills, • Strong organizational and time management skills, • Ability to do multi-task effectively, • Knowledge on performance testing using JMeter is an advantage, • Strong automation skills with Core JAVA basics skills is a must, • Strong knowledge in Selenium, TestNG, BDD automation framework is must, • API testing experience is a must

A company is looking for a Freelance Software Tester for Amazon Fire TV. Key Responsibilities Conduct functional testing on applications using Amazon Fire TV devices Participate in recurring testing sessions and ad hoc runs as needed Provide feedback to improve app performance and user experienc

A company is looking for a Software Tester (QA). Key Responsibilities Develop, execute, and deploy test scripts Perform end-to-end testing on software applications Identify, document, and log defects in the test database Required Qualifications Bachelor's degree or equivalent IT experience P

A company is looking for a Software Tester (QA). Key Responsibilities Develop, execute, and deploy test scripts Perform end-to-end testing on software applications Identify, document, and log defects in the test database Required Qualifications Bachelor's degree or equivalent IT experience P

Ability to pick up new technologies quickly, with software engineering best practices prioritized over familiarity with specific tools or languages.

The Software Engineer will be contributing to cross-platform mobile apps, single page web applications, enhancing our sheet music technology, our optical music recognition system, as well as designing robust software solutions related to the seamless integration of sheet music technologies. The idea

We build software used by thousands of scientists and pathologists, who work on the front lines of fighting big enemies, like cancer, for patients around the globe. As a Senior Software Engineer, UI, you’ll play a key role in designing and implementing the user interface for our digital pathology

Ultimately, the role of this Software Engineer is to build (and enable their teammates to build) high-quality, performant and well-tested software that complies with coding standards and quality expectations of the leadership team and our clients. We are looking for a passionate Senior Software Engi

Artera is seeking a highly skilled Senior Software Engineer to join our dedicated team, focusing on federal government projects with key clients such as the Department of Defense, Veterans Affairs, and Indian Health Service. As a Senior Software Engineer, you’ll play a pivotal role in advancing ou

On the Vistar Media engineering team, we never stop looking for our next addition.We’re kinda hoping that addition is you.We are located in a secret fortress in Center City, Philadelphia on a block protected by children and their sidewalk chalk.We want you to come in and work with the technologies

At Proscia, we build mission-critical software that powers thousands of scientists and pathologists on the front lines of diagnostics and research. As a Fullstack Developer with a strong focus on backend systems, you'll play a key role in Proscia’s digital pathology platform, helping to design, bu

With the recent acquisition of ADstruc, a leader in traditional OOH planning and buying software, Vistar Media enhances its comprehensive suite for OOH media. Bachelor's degree in any field and 7+ years of professional experience working as a Software Engineer.

Experience designing, developing, testing, and installing software and supporting software products. The selected candidate will contribute to all aspects of the software life cycle including but not limited to requirements definition, software development, documentation, testing, deployment, suppor

As a leader in pathology AI software, we are empowering pathologists and scientists to transition from traditional microscope-based workflows to digital, AI-driven approaches, unlocking new possibilities in precision medicine. As a Senior Software Engineer specializing in API development, you’ll b

At NeuroFlow, a Senior Software Engineer is recognized as an industry expert in software development, bringing extensive technical knowledge and leadership to drive forward the most challenging projects. Lead the design and implementation of highly complex full-stack software projects that advance t

Senior Software Engineer - Oracle Fusion Developer.

We are looking for Front-end Software Engineers who are eager to build in a dynamic, startup environment inside a stable, profitable company. Decompose existing software systems while working with and influencing others to improve overall architecture. Participate in all aspects of the software deve

In the role of Senior Software Engineer, Data Platform at Opendata, you'll spearhead the development of entirely new architecture for our new Data platform from the ground up.

We are currently seeking a Senior Software Engineer to help grow our connected devices division. Work alongside a team of engineers, providing technology leadership to create and own the end-end software development life cycle of the product. Experience with developing complex software systems with

As a Software Development Engineer, you will design, develop, and test software applications and services.

Key Responsibilities Architect, build, and maintain scalable software systems for an AI Phone Assistant Design and implement AI-driven workflows using large language models and conversational AI Collaborate with cross-functional teams to deliver production-grade AI capabilities Required Qualifi

Key Responsibilities Design, develop, and deliver high-quality software solutions Analyze and select technology solutions that are scalable and secure Conduct code reviews and ensure acceptance criteria are met for stories Required Qualifications Bachelor's degree in Computer Science / Softwa