Trabajos steel en Baldwin, New YorkCrear alertas

Job DescriptionSanitation Associate Pay Rate: $23/hour Schedule: Monday–Thursday, 11:00 PM – 7:30 AM; Saturday 7:00 AM – 5:00 PM (hours subject to business needs) Requirements: Steel-toe boots required ? Position Overview This is a physically demanding, detail-oriented sanitation role focused on deep cleaning and sanitizing production equipment in a food manufacturing environment. The position involves disassembling and thoroughly cleaning equipment used to transport food products, ensuring compliance with strict quality and safety standards. ? Key Responsibilities • Disassemble, clean, and reassemble food processing equipment, including large kettles and piping systems, • Perform deep cleaning of kettles (comparable in size to hot tubs) using manual scrubbing, chemicals, and power washing equipment, • Follow Sanitation Standard Operating Procedures (SSOP) to ensure thorough cleaning and compliance, • Use appropriate cleaning chemicals safely, adhering to dilution guidelines and safety standards, • Operate Clean-in-Place (CIP) systems and perform tasks such as milk silo cleaning, • Complete sanitation within required timeframes (approximately 60–75 minutes once fully trained), • Maintain accurate sanitation logs, daily reports, and required documentation, • Work closely with Quality Assurance teams, who inspect and verify cleanliness using testing procedures, • Provide support and cross-coverage for other departments as needed, • Assist in training and guiding new sanitation team members when applicable ? Qualifications & Skills • Ability to follow written and verbal instructions, including sanitation procedures and safety protocols, • Knowledge of MSDS (Material Safety Data Sheets) and chemical safety guidelines, • Mechanically inclined with ability to dismantle and reassemble equipment, • Strong attention to detail and commitment to cleanliness and quality standards, • Ability to work independently and as part of a team in a fast-paced environment, • Basic computer skills for documentation and reporting ? Physical & Work Environment Requirements • Ability to stand for entire shift, • Ability to lift up to 50 lbs regularly, • Ability to work in wet, hot, and cold environments, • Exposure to noise typical of a production environment, • Use of PPE including protective boots, gloves, and sanitation gear required, • Must be fluent in reading and writing in English or Spanish for safety purposes As part of our promise to talent, Kelly supports those who work with us through a variety of benefits, perks, and work-related resources. Kelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. As a Kelly employee, you will have access to a retirement savings plan, service bonus and holiday pay plans (earn up to eight paid holidays per benefit year), and a transit spending account. In addition, employees are entitled to earn paid sick leave under the applicable state or local plan. Click here for more information on benefits and perks that may be available to you as a member of the Kelly Talent Community. Put your skills to work. There are a lot of different light industrial jobs out there. Kelly® Professional & Industrial recruiters are focused on only offering opportunities with companies that provide competitive pay, safe work environments, and cultures that recognize your value. Whether you’re looking for flexible shifts, performance bonuses, or a progressive work culture-we’re dedicated to finding the very best opportunities for you. About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Kelly may use AI-powered tools during the recruitment and hiring process. For full details, including how Kelly uses AI, your rights, and how to request a reasonable accommodation, visit the Recruitment Artificial Intelligence Notice.

Job Description Pay: $22.00 per hour Job description: Job Summary Join our dynamic team as a Warehouse Associate and become a vital part of our fast-paced distribution center! In this energetic role, you will be responsible for efficiently managing warehouse operations, ensuring accurate order fulfillment, and maintaining a safe, organized environment. Your proactive approach will help us deliver exceptional service to our customers through precise shipping, receiving, stocking, and inventory management. This paid position offers an exciting opportunity to develop your skills in warehouse management systems and logistics while contributing to a thriving supply chain operation. The Warehouse Operator is responsible for ensuring product availability, scheduling deliveries and maintaining records shipment and deliveries in order to provide the customer with professional logistic services. Shift Monday – Friday from 8am – 4:30 pm. Shift schedules could include weekends. Hours subject to business needs. Steel -Toe shoes required Temporary Position Essential Functions: • Operate a forklift in a safe and orderly manner, • Receive and store incoming items according to established system, • Maintain a safe and orderly storage arrangement for all items handled, • Maintain cleanliness in assigned areas, • Handles reloading and loading of trucks, • Must be able to pass Forklift Driving Skills test or currently posses Forklift Driving Certificate, • Work with the quality control receiving inspector, Stock/Inventory. Picking orders for staging, • Assisting with other warehouse duties as need be., • Knowledge, Skills, Abilities and Traits: Knowledge of FIFO, Cycle Count, Basic math skills, and ability to read a spreadsheet, • Customer service environment, Ability to work in a team environment, • Flexibility and good communication skills., • Standing-Entire shift, Lifting up to 75 lbs. regularly, • Working in hot/cold temperatures-Occasionally, • Noise typical of a production environment, • Entire shift Required-Steel Toed Shoes., • Due to onsite safety all candidates must fluent and able to read and write in either English or Spanish. Work Location: In person

Job Description Position Description $22/hr Monday - Friday from 8am - 4:30pm. Shift schedules could include weekends. Hours subject to business needs. Steel Toe shoes required Temp The Warehouse Operator is responsible for ensuring product availability, scheduling deliveries and maintaining records shipment and deliveries in order to provide the customer with professional logistic services. Essential Functions: • Operate a forklift in a safe and orderly manner, • Receive and store incoming items according to established system, • Maintain a safe and orderly storage arrangement for all items handled, • Maintain cleanliness in assigned areas, • Handles reloading and loading of trucks, • Must be able to pass Forklift Driving Skills test or currently posses Forklift Driving Certificate, • Work with quality control receiving inspector, Stock/Inventory. Picking orders for staging, • Assisting with other warehouse duties as need be., • Knowledge, Skills, Abilities and Traits: Knowledge of FIFO, Cycle Count, Basic math skills and ability to read a spreadsheet, • Customer service environment, Ability to work in a team environment, • Flexibility and good communication skills., • Standing-Entire shift, Lifting up to 75 lbs. regularly, • Working in hot/cold temperatures-Occasionally, • Noise typical of a production environment, • Entire shift Required-Steel Toed Shoes., • Due to onsite safety all candidates must fluent and able to read and write in either English or Spanish. Company DescriptionAbout BCforward: Founded in 1998 on the idea that industry leaders needed a professional service, and workforce management expert, to fuel the development and execution of core business and technology strategies, BCforward is a Black-owned firm providing unique solutions supporting value capture and digital product delivery needs for organizations around the world. Headquartered in Indianapolis, IN with an Offshore Development Center in Hyderabad, India, BCforward’s 6,000 consultants support more than 225 clients globally. BCforward champions the power of human potential to help companies transform, accelerate, and scale. Guided by our core values of People-Centric, Optimism, Excellence, Diversity, and Accountability, our professionals have helped our clients achieve their strategic goals for more than 25 years. Our strong culture and clear values have enabled BCforward to become a market leader and best in class places to work. BCforward is an equal opportunity employer.About BCforward:\r\n\r\nFounded in 1998 on the idea that industry leaders needed a professional service, and workforce management expert, to fuel the development and execution of core business and technology strategies, BCforward is a Black-owned firm providing unique solutions supporting value capture and digital product delivery needs for organizations around the world. Headquartered in Indianapolis, IN with an Offshore Development Center in Hyderabad, India, BCforward’s 6,000 consultants support more than 225 clients globally.\r\n\r\nBCforward champions the power of human potential to help companies transform, accelerate, and scale. Guided by our core values of People-Centric, Optimism, Excellence, Diversity, and Accountability, our professionals have helped our clients achieve their strategic goals for more than 25 years. Our strong culture and clear values have enabled BCforward to become a market leader and best in class places to work.\r\n\r\nBCforward is an equal opportunity employer.

Job Description BCforward is looking for a motivated Warehouse Worker in 50 Ludy Street, Hicksville, NY 11801 Position Title: Warehouse Worker Location: 50 Ludy Street, Hicksville, NY 11801 Expected Duration: 3+ Months Shift: MON - FRI, 3pm to 1:30am Pay Rate: $18.00 Position Description Shift: MON - FRI, 6am - 3:30am. Shift schedules could include weekends. Hours subject to business needs. *Need Solid Transportation* Steel toed shoes are required but we may be able to provide composite safety shoe covers if they do not have them readily available • Self-Reliant and able to accurately work under limited supervision, • Attending area of transfer from filler to chiller., • Inform Supervisors and or Lead of any discrepancy on product information., • Transferring carts of production in and out of chillers and placing them orderly at the WIP area., • Orient product alignment in the Garvey table area, • Flip trays in chillers when needed., • Reworking product that is below specifications., • Keeping work area clean and organized, following the 5 S program., • Promoting a safe work environment at all times., • Follow HACCP principles and Good Manufacturing Practices. Comply with Food and Personal Safety Procedures, company Policies and regulations., • Other duties, as assigned including transferring to Kitchen area as needed., • Perform other duties as assigned Competencies (skills, knowledge and abilities) • 18 years or older • Ability to read, write, comprehend, follow verbal and written instructions and possess basic mathematical skills Minimum General Requirements • Frequent movement including walking, standing, bending/stooping, turning, twisting, pushing, pulling, raising arms, lifting, climbing and other active movements • Able to lift up to 50 lbs, • Performing duties while wearing personal protective equipment, • Able to work in noisy environments, • Working across temperature zones that may include cold and/or hot environments for extended periods and may include work in environments where dust is present Preferred Education and Experience • High School diploma or GED-equivalent, • Bilingual - Spanish Travel Required • N/A Other Duties • As assigned Benefits: BCforward offers all eligible employees a comprehensive benefits package including, but not limited to major medical, HSA, dental, vision, employer-provided group life, voluntary life insurance, short-term disability, long-term disability, and 401k. Company DescriptionAbout BCforward: Founded in 1998 on the idea that industry leaders needed a professional service, and workforce management expert, to fuel the development and execution of core business and technology strategies, BCforward is a Black-owned firm providing unique solutions supporting value capture and digital product delivery needs for organizations around the world. Headquartered in Indianapolis, IN with an Offshore Development Center in Hyderabad, India, BCforward’s 6,000 consultants support more than 225 clients globally. BCforward champions the power of human potential to help companies transform, accelerate, and scale. Guided by our core values of People-Centric, Optimism, Excellence, Diversity, and Accountability, our professionals have helped our clients achieve their strategic goals for more than 25 years. Our strong culture and clear values have enabled BCforward to become a market leader and best in class places to work. BCforward is an equal opportunity employer.About BCforward:\r\n\r\nFounded in 1998 on the idea that industry leaders needed a professional service, and workforce management expert, to fuel the development and execution of core business and technology strategies, BCforward is a Black-owned firm providing unique solutions supporting value capture and digital product delivery needs for organizations around the world. Headquartered in Indianapolis, IN with an Offshore Development Center in Hyderabad, India, BCforward’s 6,000 consultants support more than 225 clients globally.\r\n\r\nBCforward champions the power of human potential to help companies transform, accelerate, and scale. Guided by our core values of People-Centric, Optimism, Excellence, Diversity, and Accountability, our professionals have helped our clients achieve their strategic goals for more than 25 years. Our strong culture and clear values have enabled BCforward to become a market leader and best in class places to work.\r\n\r\nBCforward is an equal opportunity employer.

Job Description G&L Welding Services LLC is seeking an experienced structural steel ironworker to assist with erection, layout, and installation of structural steel on a per diem basis. The ideal candidate has hands-on experience installing steel beams, columns, and structural framing, can interpret structural drawings, and is capable of taking accurate field measurements for fabrication and installation. Projects include residential and commercial structural steel work throughout Long Island and the NYC area. Responsibilities Assist with erection and installation of structural steel including beams, columns, lintels, and structural framing Interpret structural drawings and shop drawings Take accurate field measurements and layouts for fabrication and installation Perform bolting, rigging, and field welding Assist with alignment, leveling, and installation of steel members Coordinate with equipment operators and crew during steel erection Maintain safe work practices on job sites Requirements Proven experience with structural steel erection Ability to read and interpret structural plans Experience with field layout and measuring Knowledge of rigging, bolting, and steel connections Comfortable working with lifts, telehandlers, or similar equipment Reliable transportation Strong work ethic and ability to work independently Preferred Qualifications Welding experience (SMAW / stick welding) OSHA 10 or OSHA 30 certification Experience with residential structural steel installations Schedule Per diem / project-based work depending on workload Mostly daytime hours About G&L Welding Services LLC G&L Welding Services LLC is a growing metal fabrication and installation company specializing in structural steel and architectural metals for residential and commercial construction projects across Long Island.

Job Description Summary: Parabit Systems, a well-established and rapidly expanding company in the security and self-service equipment industries, is currently seeking an experienced, motivated, innovative, problem solver with a comprehensive understanding of all facets of Metal Work and Finishing. Candidates must have a minimum of three (3) years' experience in the field. The applicant must be proficient in fabricating top quality finished products. Applicants must be able to read and review shop drawings. A strong work ethic and personal commitment to quality and service are essential for this position. Adhering to deadlines and time management skills are essential. We are looking for a candidate with excellent communication skills that is highly organized, reliable, trustworthily, and efficacy driven. Primary Responsibilities: • Job duties include grinding, sanding, and filling uneven surfaces, polishing and coating metal, and etching decorative details., • Removes dents, scratches, and defects from metal surfaces using stroke sanders, hand power tools and pneumatic tools., • Operate a variety of machines for metal finishing., • Follow safety instructions including P.P.E. Fill out paperwork to accurately track traceability on all parts., • Ability to read and review fabrication drawings and specifications., • Consistently work within tight tolerances., • Manufacture high quality products., • Very knowledgeable with sanding, preparation, finishing, application, polishing, repair and manual machining techniques., • Exceptionally knowledgeable in various millwork products such as laminates, solid surfacing, painted finishes, and stainless steel., • Must adhere to established procedures/processes/policies., • Self-Motivated, with a strong work ethic. Education/Experience: • High school diploma., • 3 years' experience in metalwork., • Painting or Powder-Coating knowledge a big plus., • Able to work as a team and motivate employees. Parabit Systems is focused on growth and growing leaders. Parabit Systems is an equal opportunity employer, offering a great work environment, and challenging career opportunities. Please email your resume to Recruiting@Parabit.com. Benefits: • Medical, • Dental, • Vision, • 401K, • Group Life, • PTO All employment candidates must pass: a NON-DOT Drug screening, Criminal and Credit Background Check and a Driver License Check prior to employment.

Job Description Job Title: Production Worker Pay Rate: $18/hr Schedule: MON – FRI, 6:00am - 3:30pm. Shift schedules could include weekends. Hours subject to business needs. Location: Hicksville NY USA 11802 Job Summary: We are seeking a dedicated and reliable Production Associate to join our team. This position involves working with corn and soybean seeds, including bagging, palletizing, and treating processes. Ideal candidates will have a strong work ethic, excellent punctuality, and the ability to perform repetitive tasks with attention to detail. Key Responsibilities: • Bag and palletize corn and soybean seeds according to production orders., • Treat and prepare soybean seeds for distribution., • Interpret and follow written production orders, including quantities, lot numbers, and labels., • Operate equipment safely and efficiently, including passing forklift training., • Maintain a clean and organized work environment., • Adhere to all safety guidelines to ensure a safe workplace. Qualifications: • High School Diploma or GED preferred., • Reliable transportation is essential., • Steel toe shoes are required for safety., • Ability to lift up to 50 pounds on a regular basis., • Excellent communication and interpersonal skills., • Strong attention to detail and ability to follow instructions., • Basic math skills for counting and inventory management., • Must be able to work on your feet for extended periods in a fast-paced environment. Additional Information: • Candidates must complete a background check prior to starting the assignment., • In-person interviews are required for this position. Join our team and contribute to our commitment to high-quality seed production! Apply today to be part of a dynamic work environment. As part of our promise to talent, Kelly supports those who work with us through a variety of benefits, perks, and work-related resources. Kelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. As a Kelly employee, you will have access to a retirement savings plan, service bonus and holiday pay plans (earn up to eight paid holidays per benefit year), and a transit spending account. In addition, employees are entitled to earn paid sick leave under the applicable state or local plan. Click here for more information on benefits and perks that may be available to you as a member of the Kelly Talent Community. Put your skills to work. There are a lot of different light industrial jobs out there. Kelly® Professional & Industrial recruiters are focused on only offering opportunities with companies that provide competitive pay, safe work environments, and cultures that recognize your value. Whether you’re looking for flexible shifts, performance bonuses, or a progressive work culture-we’re dedicated to finding the very best opportunities for you. About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.

Job Description We are seeking a responsible and experienced Kitchen Utility Worker/Dishwasher to assist the busy kitchen team of a luxury assisted living community with various job-related tasks and other support activities as they arise. The position involves sweeping, mopping and the cleaning of equipment, such as mixers, slicers, peelers, fryers, blenders and counters. The right candidate will take great care and pride in their work and consider this entry position as a potential stepping stone toward building a career in food services. Additional job responsibilities include: • Cleaning, prepping and washing dishware, silverware, glassware, pots and pans, • Ensuring all chemical dispensers are working and cleaning supplies are adequate, being careful to use all safety equipment to meet OSHA standards, • Sweeping and mopping floors as directed, • Emptying and cleaning garbage from kitchen to dumpster, • Assisting with heavy lifting, • Daily cleaning of steam kettle, grill, range tops, brazier, stainless steel surfaces, dish racks, dish storage areas, dishwasher and dishwashing area, • Monthly cleaning of all kitchen surfaces, including walls, ceilings, stairs, tables, table legs and appliances, • Assisting in the dining room, removing soiled dishes during meal service and returning them to the kitchen Full-time Schedule will include working the weekends. The ideal candidate will have experience in a busy kitchen or food preparation area and come with: • Experience working in a restaurant, catering facility, hospital, hospitality, healthcare or similar food services related industry as a plus, • Must be able to operate in a fast-paced environment, • Must have physical ability for strenuous cleaning and lifting, • Ability to understand the English language and follow instructions with minimal supervision, • Proven ability to follow all rules, regulations, policies and sanitary standards established by management

Job Description Work Setting: Hybrid Hazen and Sawyer is seeking Principal Structural Engineer for our New York, New Jersey, Connecticut, or Massachusetts offices. As part of our Structural team. The position will work on a wide range of projects to include planning, design, permitting, and construction of structures in the ‘water space’ (i.e. drinking water, wastewater, water resources, conveyance, canals and ports). Client development, project management, technical leadership and staff mentoring opportunities will be possible for the selected individual across Hazen’s Northeast and Midwest businesses. Primary focus will be projects in NY, NJ and CT. Fieldwork and site visits from planning through construction may be required with occasional travel. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,400 employees in 90+ offices throughout the United States, Latin America, Canada, and the UK., • A flexible hybrid work schedule supports today's busy professionals Key Responsibilities: • Project engineering/management, mentoring and developing junior staff, performing site inspections and assessments of existing infrastructure. ·, • Perform assessment, design, and construction tasks for water and wastewater treatment projects., • Produce design calculations, technical reports, permitting, detailed design and engineering plans/specifications for environmental structures such as industrial buildings, pump stations, process basins, storage facilities and treatment facilities., • Participate in construction tasks for similar projects including submittal review, responding to RFI’s, site inspections and clarifications during construction, • Technical Engineering Leadership., • Staff Development. Required Qualifications: • BS degree in Civil Engineering (with a Structural Concentration preferred) or Structural Engineering, • PE license (or ability to obtain within 6 months), • 5-12 years of related experience, • Experience in design and construction of structural steel, reinforced concrete, reinforced masonry, and aluminum is required as well as knowledge of applicable building codes, design standards including ACI, AISC, ASCE, and structural analysis and design software., • Candidates must be effective communicators and be able to successfully work in a multi-discipline team environment Preferred Qualifications: • Advanced degree (Master’s or Doctorate) in Civil Engineering (with a Structural Concentration) or Structural Engineering What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans)., • Pre-tax flexible spending plans for medical, dependent care, and transportation., • Short- and long-term disability, plus employer-paid life insurance., • Paid holidays, floating holidays, and paid time off (PTO)., • Employer-contributed 401(k) plan and additional financial planning support., • Professional development opportunities, including tuition reimbursement, in-house training, and incentives for professional licensure and professional organization memberships., • Starting pay range for this position depends on skills, experience, education, and geographical location. #li-hybrid

Job Description We are looking to hire a Commercial Door Mechanic to join our team! Your main responsibilities will be Door & Hardware Installation & Repairs in a hospital setting throughout the 5 Boroughs & Parts of Long Island. Role and Responsibilities • Installation of hollow metal Doors, Frames, and hardware in steel stud and concrete openings., • Installation and repair of Door hardware including Closers, Panic Bars, various locksets, Door Coordinators, Continuous hinges, Kick plates, Flushbolts, Vision panels, • MUST show up on time & follow safeguards, rules, and regulations per the jobsite foreman/manager, • Installation & Repairs of metal framing and sheetrock to facilitate door frame installation/repair., • Misc. maintenance work including minor masonry repairs, fire stopping, cleaning, etc., as needed., • Maintaining jobsite inventory of supplies, site tools and equipment., • Provide accurate and complete documentation of prior conditions and work performed for customer reporting using phone/tablet., • Maintain professional and timely communication with customers and AFG management., • Reviewing and implementing work orders and assignments, • Following safeguards, rules, and regulations Job Requirements • Minimum 10 years experience in Door Installation & Repairs, commercial carpentry., • Good verbal and written communication skills., • Must be self-motivated and possess the ability to perform work throughout a facility self-directed which includes communication with customers and staff., • Maintain a professional appearance which includes consistent on-time arrival at job sites., • Administer proper infectious control measures as per hospital requirements when performing inspections., • Demonstrate ability to read, follow, and label Life Safety Plans/Drawings., • Capable of aligning work schedule with the on-site need for tools and materials, which includes unloading and loading of these materials and tools, and any other necessary equipment., • Knowledge of computer software a plus (Microsoft Word & Excel, Email, and Adobe Acrobat), • Efficient with smartphones, tablets, computers, and chosen applications for daily reporting., • 20% out-of-town travel required (30+ miles). Additional Requirements • Valid driver license with an acceptable driving record., • Reliable Vehicle to get to various jobsites., • Must pass criminal background check Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • 8:00am – 4:00pm regular work hours at jobsites throughout NYC & Long Island, • The employee is regularly required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs & ladders; balance; stoop, kneel, crouch or crawl; talk and hear., • Associate is required to spend 20% or more of time climbing and using various ladders., • Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus., • Must be able to lift and/or move up to 60 pounds independently., • Working extended hours which includes evenings and weekends (compensation provided)., • Paid Holidays & Paid Time Off (vacation, sick, personal), • 401k with Employer Matching up to 5%Company DescriptionWe specialize in Operation, Inspections, Repairs, and Renovations of Healthcare Facilities in the NYC area.We specialize in Operation, Inspections, Repairs, and Renovations of Healthcare Facilities in the NYC area.

Job DescriptionJob Title: Production Associate Pay Rate: $18.00 per hour Shift: Monday - Friday, 5:00 AM - 3:30 PM (Shift schedules may include weekends based on business needs) Transportation Requirement: Reliable transportation is essential. Safety Requirements: Steel-toed shoes are required. Composite safety shoe covers may be provided if needed. Job Summary: The Production Associate will work under the guidance of supervisors to meet production demands while adhering to quality and safety standards. This role requires self-reliance and the ability to work accurately with limited supervision. Essential Job Functions: • Efficiently transfer product between filler and chiller stations., • Communicate any discrepancies in product information to supervisors or leads., • Manage the transportation of production carts in and out of chillers, ensuring orderly placement in the Work In Progress (WIP) area., • Align products correctly on the Garvey table., • Flip trays in chillers as required., • Rework products that do not meet specifications., • Maintain a clean and organized work area, following the "5S" program., • Promote a safe work environment at all times., • Adhere to HACCP principles and Good Manufacturing Practices; comply with food and personal safety procedures, as well as company policies and regulations., • Perform additional duties as assigned, including assistance in the Kitchen area as needed. Competencies: • Must be 18 years or older., • Ability to read, write, comprehend, and follow verbal and written instructions; basic mathematical skills required. Physical Requirements: • Frequent movement including walking, standing, bending, stooping, turning, twisting, pushing, pulling, raising arms, lifting, and climbing., • Ability to lift up to 50 lbs., • Perform tasks while wearing personal protective equipment (PPE)., • Work effectively in noisy environments., • Adapt to varying temperature zones, including cold and hot environments for extended periods, and work in areas where dust may be present. Preferred Education and Experience: • High school diploma or GED equivalent., • Bilingual in Spanish is a plus. As part of our promise to talent, Kelly supports those who work with us through a variety of benefits, perks, and work-related resources. Kelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. As a Kelly employee, you will have access to a retirement savings plan, service bonus and holiday pay plans (earn up to eight paid holidays per benefit year), and a transit spending account. In addition, employees are entitled to earn paid sick leave under the applicable state or local plan. Click here for more information on benefits and perks that may be available to you as a member of the Kelly Talent Community. Put your skills to work. There are a lot of different light industrial jobs out there. Kelly® Professional & Industrial recruiters are focused on only offering opportunities with companies that provide competitive pay, safe work environments, and cultures that recognize your value. Whether you’re looking for flexible shifts, performance bonuses, or a progressive work culture-we’re dedicated to finding the very best opportunities for you. About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Kelly may use AI-powered tools during the recruitment and hiring process. For full details, including how Kelly uses AI, your rights, and how to request a reasonable accommodation, visit the Recruitment Artificial Intelligence Notice.

Job Description We are looking for Experienced Diesel Mechanic to join our team! Heavy Duty Inspection License preferred! Great opportunity for growth ! New Facility ! Excellent working Conditions!!!

Job Description Pay Rate $23/hr Monday - Thursday, 11pm - 7:30am and Saturdays from 7am to 5pm. Hours subject to business needs. Steel Toe Shoes The sanitation role is NOT a janitor role. It is an arduous, tedious, task oriented role. They are required to essentially take apart a plumbing system that carries pudding from the kettle to the filling machines. The kettles are as big as hot tubs and the sanitation associates are required to stand over them and use elbow grease and chemicals to literally scrub the kettle clean. They use power washers and special protective boots and PPE to protect against the water and chemicals used in the process. Quality Assurance will then swab the kettle and examine it microscopically to ensure all traces of pudding are gone. Once trained, an associate will be able to clean the kettle in about an hour to an hour and 15 minutes-one of the expectations of the role. The Sanitarian is responsible for up keep and sanitation of variety of food service equipment and facility. Essential Functions: Clean and sanitize equipment as directed by the supervisor, Follow SSOP ( Sanitation Standard Operating Procedures), Comply with proper handling of chemicals and dilation factors, Responds to emergencies, Provide technical direction and training to other sanitarians as applicable, May fill in for other departmental absences, Needs to be familiar with CIP (Chemical in Place) operation and milk Silo clean, Stay current with safety training and proper PPE (Personal Protective Equipment), Knowledge, Skills, Abilities and Traits: Mechanically inclined to dismantle and reassemble equipment, Be able to read and understand sanitation procedures. Follow written and oral procedure, MSDS (Material Safety Data Sheets) knowledgeable, Fill out master sanitation and daily paperwork, Equipment Used: PC, proprietary software, telephone, and other office equipment. Various lab equipment. Kettle enabling system. Physical Demands: Standing-Entire shift, Lifting up to 50 lbs. regularly, Working in hot/cold temperatures-Occasionally, Noise typical of a production environment-Entire shift Required-Steel Toed Shoes. Due to onsite safety all candidates must fluent and able to read and write in either English or Spanish. Company DescriptionAbout BCforward: Founded in 1998 on the idea that industry leaders needed a professional service, and workforce management expert, to fuel the development and execution of core business and technology strategies, BCforward is a Black-owned firm providing unique solutions supporting value capture and digital product delivery needs for organizations around the world. Headquartered in Indianapolis, IN with an Offshore Development Center in Hyderabad, India, BCforward’s 6,000 consultants support more than 225 clients globally. BCforward champions the power of human potential to help companies transform, accelerate, and scale. Guided by our core values of People-Centric, Optimism, Excellence, Diversity, and Accountability, our professionals have helped our clients achieve their strategic goals for more than 25 years. Our strong culture and clear values have enabled BCforward to become a market leader and best in class places to work. BCforward is an equal opportunity employer.About BCforward:\n\nFounded in 1998 on the idea that industry leaders needed a professional service, and workforce management expert, to fuel the development and execution of core business and technology strategies, BCforward is a Black-owned firm providing unique solutions supporting value capture and digital product delivery needs for organizations around the world. Headquartered in Indianapolis, IN with an Offshore Development Center in Hyderabad, India, BCforward’s 6,000 consultants support more than 225 clients globally.\n\nBCforward champions the power of human potential to help companies transform, accelerate, and scale. Guided by our core values of People-Centric, Optimism, Excellence, Diversity, and Accountability, our professionals have helped our clients achieve their strategic goals for more than 25 years. Our strong culture and clear values have enabled BCforward to become a market leader and best in class places to work.\n\nBCforward is an equal opportunity employer.

Job Description Quality Inspector - Garden City, New York Must have AS9100 Aerospace experience to qualify for the job About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • High school graduate, • 3-5 Years mechanical inspection, aerospace experience, • Post high school education in math, engineering, inspection techniques or related fields a plus SUMMARY OF POSITION Responsible for first piece inspection, in-process and final products using open set-up, CMM and inspection methods and techniques in accordance with drawing requirements and specifications. Good communication skills, able to read and follow the Client’s work instructions and quality procedures. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Read and interpret aerospace engineering drawings using geometric dimensioning and tolerances including and understanding of maximum material conditions, • Inspect detail parts and assemblies per drawing requirement and specs using standard measuring equipment, • Prepare and maintain inspection reports, • Program and/or operate Coordinate Measuring Machine, • Perform Hardness testing, • Collect and tabulate data for SPC use, • Review Supplier F.A.I.R./Generate First Article Reports per AS9102, • Other duties as directed by the management QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Basic computer knowledge including MS Excel and Word, • Interpret drawing requirements/specs and geometric dimensions and tolerances, • Familiar with MIL, NAS, MS, AMS, AWS and AS specifications and standards, • PCDMIS programming skills, • Familiar with special process specifications for heat treat, welding, and non-destructive testing EQUIPMENT USED • Vernier calipers, • Micrometers, • Height Gauges, • CMM machines, • Other standard measuring tools/instruments, • Please note, all Production Floor employees are required to wear steel toe boots. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $55,000 to $75,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information. https://www.highertalentgroup.com

Job Description DUTIES AND KEY RESPONSIBILITIES: • Check floor plan for assigned station and side work., • Greet all residents and guests. Assist residents to table and help them fold walkers as needed., • Distribute/collect menus. Take meal orders, monitor residents’ dietary needs and make menu suggestions accordingly., • Assist in the plating and proper portion controls of some or all of the following: appetizer, salads, soup, beverages and desserts for residents and guests., • Before serving, check the meal to ensure that it is appetizing in appearance and aroma and will present well., • Serve meals and beverages to residents, ensuring accuracy and promptness., • Monitor resident’s eating habits and report anything unusual to the Director of Wellness., • Check back to tables after the meal is served to see that meal is acceptable and that residents have everything needed for a satisfying dining experience., • Watch for residents' cues and non-verbal communication to anticipate their needs and provide prompt service., • Respond promptly to special requests and dietary preferences, accommodating residents' individual needs. Respond to resident questions about the food, if possible, if not, report the question to the Chef on duty., • Set and clear tables. Ensure cleanliness and organization in the dining area. Check table settings for cleanliness, especially inspecting glass and silverware and remove and/or replace as necessary., • Pick up all dirty dishes as the resident finishes each course., • Bus tables at end of meal. Carry soiled dishes, utensils, etc., to wash area; scrape dishes and place in the dish drop off area., • Re-sets tables in station completely, including wiping down vases, salt and pepper shakers, change tablecloths, wipe chairs and chair legs., • Assure that condiments and supplies for the next meal are readily available., • Provide excellent customer service to residents, their families, and guests, creating a friendly and comfortable environment., • Develop positive relationships with residents, addressing them by name and engaging in conversation to enhance their dining experience., • Familiarize yourself with the daily menu, including options for special diets and dietary restrictions prior to approaching wait stations., • Assist residents in making informed choices by providing detailed descriptions of the menu items and making recommendations based on their preferences., • Work closely and cooperatively with kitchen staff, ensuring accurate communication of orders and any specific dietary requirements., • Collaborate with other team members to maintain a smooth flow of service and address any issues or concerns promptly., • Assist other employees in the performance of their assignments when you are available, seeking out opportunities to help., • Recognize the need for variations in staffing and volunteer to fill open shifts., • Follow established hygiene and safety protocols, maintaining cleanliness and organization in the dining area., • Adhere to food handling guidelines and ensure proper sanitation of dishes, utensils, and service areas., • Follow proper storage practices, including time and date labeling, quality assurance, categorizing storage areas and stock rotation., • Detect and identify any unpleasant odors in the dining area, such as spoiled food or unsanitary conditions, and promptly address them., • Clean and sanitize the following: commercial coffee maker, iced tea machine, juice and /or soda dispenser, ice cream freezer, soft serve yogurt, reach-in refrigerators and freezers, bussing carts, conveyor and/or popup toaster, stainless steel, storage and production surfaces., • Vacuum floors and mats, sweep floor in service area, remove trash as required., • Complete special assigned cleaning jobs based on periodic schedules., • Foster a sense of community by engaging with residents, listening to their feedback, and addressing any concerns or special requests., • Promote social interaction during mealtimes to enhance the residents' overall experience., • Support the organization and execution of special events and celebrations within the community., • Assist in setting up and decorating dining areas for these occasions, ensuring a festive and welcoming atmosphere., • Wear proper and clean company uniform., • Performs other duties and/or assists in other departments as assigned by Supervisor, Executive Director or Manager on duty.

Job Description DUTIES AND KEY RESPONSIBILITIES: • Check floor plan for assigned station and side work., • Greet all residents and guests. Assist residents to table and help them fold walkers as needed., • Distribute/collect menus. Take meal orders, monitor residents’ dietary needs and make menu suggestions accordingly., • Assist in the plating and proper portion controls of some or all of the following: appetizer, salads, soup, beverages and desserts for residents and guests., • Before serving, check the meal to ensure that it is appetizing in appearance and aroma and will present well., • Serve meals and beverages to residents, ensuring accuracy and promptness., • Monitor resident’s eating habits and report anything unusual to the Director of Wellness., • Check back to tables after the meal is served to see that meal is acceptable and that residents have everything needed for a satisfying dining experience., • Watch for residents' cues and non-verbal communication to anticipate their needs and provide prompt service., • Respond promptly to special requests and dietary preferences, accommodating residents' individual needs. Respond to resident questions about the food, if possible, if not, report the question to the Chef on duty., • Set and clear tables. Ensure cleanliness and organization in the dining area. Check table settings for cleanliness, especially inspecting glass and silverware and remove and/or replace as necessary., • Pick up all dirty dishes as the resident finishes each course., • Bus tables at end of meal. Carry soiled dishes, utensils, etc., to wash area; scrape dishes and place in the dish drop off area., • Re-sets tables in station completely, including wiping down vases, salt and pepper shakers, change tablecloths, wipe chairs and chair legs., • Assure that condiments and supplies for the next meal are readily available., • Provide excellent customer service to residents, their families, and guests, creating a friendly and comfortable environment., • Develop positive relationships with residents, addressing them by name and engaging in conversation to enhance their dining experience., • Familiarize yourself with the daily menu, including options for special diets and dietary restrictions prior to approaching wait stations., • Assist residents in making informed choices by providing detailed descriptions of the menu items and making recommendations based on their preferences., • Work closely and cooperatively with kitchen staff, ensuring accurate communication of orders and any specific dietary requirements., • Collaborate with other team members to maintain a smooth flow of service and address any issues or concerns promptly., • Assist other employees in the performance of their assignments when you are available, seeking out opportunities to help., • Recognize the need for variations in staffing and volunteer to fill open shifts., • Follow established hygiene and safety protocols, maintaining cleanliness and organization in the dining area., • Adhere to food handling guidelines and ensure proper sanitation of dishes, utensils, and service areas., • Follow proper storage practices, including time and date labeling, quality assurance, categorizing storage areas and stock rotation., • Detect and identify any unpleasant odors in the dining area, such as spoiled food or unsanitary conditions, and promptly address them., • Clean and sanitize the following: commercial coffee maker, iced tea machine, juice and /or soda dispenser, ice cream freezer, soft serve yogurt, reach-in refrigerators and freezers, bussing carts, conveyor and/or popup toaster, stainless steel, storage and production surfaces., • Vacuum floors and mats, sweep floor in service area, remove trash as required., • Complete special assigned cleaning jobs based on periodic schedules., • Foster a sense of community by engaging with residents, listening to their feedback, and addressing any concerns or special requests., • Promote social interaction during mealtimes to enhance the residents' overall experience., • Support the organization and execution of special events and celebrations within the community., • Assist in setting up and decorating dining areas for these occasions, ensuring a festive and welcoming atmosphere., • Wear proper and clean company uniform., • Performs other duties and/or assists in other departments as assigned by Supervisor, Executive Director or Manager on duty.

Job Description DUTIES AND KEY RESPONSIBILITIES: • Check floor plan for assigned station and side work., • Greet all residents and guests. Assist residents to table and help them fold walkers as needed., • Distribute/collect menus. Take meal orders, monitor residents’ dietary needs and make menu suggestions accordingly., • Assist in the plating and proper portion controls of some or all of the following: appetizer, salads, soup, beverages and desserts for residents and guests., • Before serving, check the meal to ensure that it is appetizing in appearance and aroma and will present well., • Serve meals and beverages to residents, ensuring accuracy and promptness., • Monitor resident’s eating habits and report anything unusual to the Director of Wellness., • Check back to tables after the meal is served to see that meal is acceptable and that residents have everything needed for a satisfying dining experience., • Watch for residents' cues and non-verbal communication to anticipate their needs and provide prompt service., • Respond promptly to special requests and dietary preferences, accommodating residents' individual needs. Respond to resident questions about the food, if possible, if not, report the question to the Chef on duty., • Set and clear tables. Ensure cleanliness and organization in the dining area. Check table settings for cleanliness, especially inspecting glass and silverware and remove and/or replace as necessary., • Pick up all dirty dishes as the resident finishes each course., • Bus tables at end of meal. Carry soiled dishes, utensils, etc., to wash area; scrape dishes and place in the dish drop off area., • Re-sets tables in station completely, including wiping down vases, salt and pepper shakers, change tablecloths, wipe chairs and chair legs., • Assure that condiments and supplies for the next meal are readily available., • Provide excellent customer service to residents, their families, and guests, creating a friendly and comfortable environment., • Develop positive relationships with residents, addressing them by name and engaging in conversation to enhance their dining experience., • Familiarize yourself with the daily menu, including options for special diets and dietary restrictions prior to approaching wait stations., • Assist residents in making informed choices by providing detailed descriptions of the menu items and making recommendations based on their preferences., • Work closely and cooperatively with kitchen staff, ensuring accurate communication of orders and any specific dietary requirements., • Collaborate with other team members to maintain a smooth flow of service and address any issues or concerns promptly., • Assist other employees in the performance of their assignments when you are available, seeking out opportunities to help., • Recognize the need for variations in staffing and volunteer to fill open shifts., • Follow established hygiene and safety protocols, maintaining cleanliness and organization in the dining area., • Adhere to food handling guidelines and ensure proper sanitation of dishes, utensils, and service areas., • Follow proper storage practices, including time and date labeling, quality assurance, categorizing storage areas and stock rotation., • Detect and identify any unpleasant odors in the dining area, such as spoiled food or unsanitary conditions, and promptly address them., • Clean and sanitize the following: commercial coffee maker, iced tea machine, juice and /or soda dispenser, ice cream freezer, soft serve yogurt, reach-in refrigerators and freezers, bussing carts, conveyor and/or popup toaster, stainless steel, storage and production surfaces., • Vacuum floors and mats, sweep floor in service area, remove trash as required., • Complete special assigned cleaning jobs based on periodic schedules., • Foster a sense of community by engaging with residents, listening to their feedback, and addressing any concerns or special requests., • Promote social interaction during mealtimes to enhance the residents' overall experience., • Support the organization and execution of special events and celebrations within the community., • Assist in setting up and decorating dining areas for these occasions, ensuring a festive and welcoming atmosphere., • Wear proper and clean company uniform., • Performs other duties and/or assists in other departments as assigned by Supervisor, Executive Director or Manager on duty. Must be able to speak, read and write in English and be able to work weekends and holidays.

Why Drive for Tennessee Steel Haulers?. Tennessee Steel Haulers is built by owner operators, for owner operators.

Project Manager III Troy, NY (On-site) Fusco Personnel is actively recruiting for a Project Manager III to join our client, a fast-growing healthcare technology organization’s Client Implementations team.This role is ideal for a detail-oriented project manager who thrives in a fast-paced environme

Aerotek - - Responsibilities: Load, unload, and transport materials within the plant, yard, and designated work areas; Operate forklifts and other material handling equipment safely and efficiently; Use MRP system and WMS software to track inventory movement and update material records; Read work o

Nesco Resource - - Responsibilities: Assembles fabricated components to make subassemblies or assemblies for electrical or electronic systems using hand and electrical tools; Assemble electronic subassemblies according to specifications.

Lockheed Martin - - Responsibilities: Assemble machined components and sheet metal parts using hand tools; Install mechanical hardware including helicoils, dowel pins, spring pins, PEM fasteners, rivnuts, and rivets; Read blueprints to guide assembly; Operate rivet tooling and sheet metal brakes (P

Goodwin Recruiting - - Responsibilities: Perform precision hand soldering of surface-mount and through-hole components to IPC Class 3 standards; Assemble and solder high-reliability printed circuit boards and sub-assemblies; Read and interpret assembly documents and engineering drawings; Operate so

Goodwin Recruiting - - Responsibilities: Wiring and soldering of electronic components; Follow drawings, schematics and work instructions; Work under a microscope; Handle surface mount components; Use standard manufacturing tools.

Retail Warehouse & Production Associate.Pay Rate: Our starting pay ranges from $17.As one of the largest for-profit thrift operators in the United States, Canada and Australia for value priced pre-owned clothing, accessories and household goods, our mission is to champion reuse and inspire a future

Aerotek - - Responsibilities: Load/unload trucks and move materials; Pick, stage, and verify orders; Inspect shipments for accuracy and damage; Build crates and prepare outbound shipments; Use RF scanners and computers for inventory.

The Business Analyst and Project Manager will play a critical role in shaping and executing the bank's projects and technology initiatives.The ideal candidate will possess extensive experience in project management within the banking and financial industry, along with exceptional coordination and le

Casella Waste Systems - - Responsibilities: Completes daily maintenance checks of the assigned unit before operation to ensure safe operation of the equipment and that no repairs are needed.Notifies technician in advance when aware that equipment will need maintenance.Operates forklift while in a f

We are recruiting on behalf of a well-established mechanical contractor based in Queens, NY, seeking an experienced HVAC Project Manager to join their growing team.This is an excellent opportunity to work with a respected contractor delivering commercial projects throughout the five boroughs of New

Project Manager with EHR, EMR and Healthcare.Proven Experience with all aspects of PM with an understanding of Project Management best practices.Ability to guide cross-functional teams, delegate tasks, and motivate personnel.Strong multitasking to handle multiple moving parts simultaneously.Experien

PrideStaff - - Responsibilities: Operate forklift safely and efficiently; Load, unload, move, and stage materials; Assist with shipping and receiving tasks; Pick, pack, and prepare orders; Maintain inventory organization and general warehouse cleanliness.

Our team members are at the heart of everything we do.At Cencora, we are united in our responsibility to create healthier futures, and every person here is essential to us being able to deliver on that purpose.If you want to make a difference at the center of health, come join our innovative company

Nesco Resource - - Responsibilities: Follow all safety procedures and participate in safety initiatives; Perform inspections and ensure product quality within tolerances; Keep machines running accurately and efficiently; make minor adjustments or repairs; Replenish raw materials and remove finished

Amazon is seeking Warehouse Shopper Team Members / Order Fulfillment Associates to work in Amazon fulfillment centers selecting, packing, and preparing customer orders for delivery.Employees are responsible for locating items in the warehouse, picking items using handheld scanners, packing items int

Job Description**: As a Warehouse Associate at DHL, you will be responsible for a variety of tasks essential to warehouse operations.These include receiving, processing, and storing incoming stock, picking and filling orders, and packing and shipping orders.You will be expected to maintain accurate

OnTrac - - Responsibilities: Unload trailers and sort packages by zip codes; Load trucks for deliveries; Be a team player everyone works together to get the job done!; Adhere to safety protocols; Maintain a productive and secure work environment.

Looking for an experienced Business Analyst/Project Manager who will be responsible for understanding and assessing the changing needs of the business.Frequently analyze the impacts of change, document and support communication between relevant groups and stakeholders, and capture requirements neede

Warehouse Associate Opportunity/h2pPeople want to work at Capstone because of our high-performance culture.We build strong relationships, challenge the status quo, work hard to deliver results, and pay it forward in our communities.Through transparency and open lines of communication, we do the righ

Join a leading moving and relocation company delivering complex commercial office and industrial moves across New York, NY.This Project Manager role sits within the commercial relocation sector, overseeing end-to-end O&I projects for corporate clients.It is ideal for an experienced relocation pr

Title: Facility Maintenance Technician.Duration: Full Time /Direct Hire.Performing inspections, diagnostics, troubleshooting, preventative maintenance, corrective repairs, and system checks on company facilities and equipment.Managing the facility maintenance schedule and coordinating activities wit

Truck Driver Union/Warehouse Associate.We are looking for a Truck Driver Union/Warehouse Associate to join our Schwing Electrical Supply team in Uniondale, NY! This position offers a Monday to Friday schedule, paid holidays & paid time off! Join our team and you'll be home to play on the weekends! S

WHO WE ARE Baldwin Richardson Foods is focused on enriching the flavor of life.As a full-service liquid products supplier and strategic partner to the food and beverage industry, Baldwin Richardson Foods combines its formulation expertise and unique packaging options with robust processing capabilit

Responsibilities: Loading and unloading merchandise; Selecting and palletizing items; Auditing and repacking; Sorting and housekeeping; Assisting site leadership with duties as assigned.