Steel jobs in New York, New YorkCreate job alerts

• ROLL HARD, EARN HARD - Top company drivers make up to $90,000/year, • PAY THAT MOVES YOU - Earn 27% of linehaul + strong weekly take-home And drivers agree: in a recent survey, nearly 90% said P&S pays better than other carriers and is a better place to work. Want a driving job where you're valued, supported, and earning more? Fill out a quick form and talk to a recruiter today. • Strong weekly pay. Top company drivers earn up to $90,000 per year, with weekly gross pay averaging $1,500-$1,800 and weekly take-home averaging $1,200-$1,500., • Percentage pay that rewards you. Make 27% of linehaul, plus tarp pay, detention pay, and layover pay-your effort directly boosts your paycheck., • Home when it counts. Get home weekends and enjoy a predictable schedule that balances strong earning potential with real time off., • Driver-friendly freight + support. Haul steady, well-planned freight - including steel coil, pipe + building material loads - with dependable miles and the support you need to stay productive on the road., • $5,000 sign-on bonus, • Medical, dental, vision, life + short-term disability, • 401(k) with company match, • $3,000 referral bonus, • Free rider + pet program There is no deadline to apply. Applications are accepted on an ongoing basis. • Valid Class A CDL

• RUN YOUR BUSINESS, RUN UP YOUR PAY - Lease drivers gross $4,000-$5,000/week, • EARN MORE WITH EVERY LOAD - Up to 75% of linehaul + 100% FSC And drivers agree: in a recent survey, nearly 90% said P&S pays better than other carriers and is a better place to work. Want a driving job where you're valued, supported, and earning more? Fill out a quick form and talk to a recruiter today. • Big earnings, week after week. Lease drivers gross $4,000-$5,000 per week and average $1,800 net weekly, with strong, steady freight that keeps your business profitable and predictable., • More control, more opportunity. Earn 68-75% of linehaul (depending on tractor and trailer) and 100% fuel surcharge, with no forced dispatch, giving you the freedom to take the loads that fit your goals., • Home time that fits your business rhythm. Get home on weekends, so you can balance strong earning power with meaningful downtime to reset and recharge., • A driver-friendly setup that keeps you moving. Run steel coil, pipe, and building material loads, work with an assigned dispatcher, and access 24-hour support whenever you need it., • Newer trucks, built for contractors. Operate 2020-2023 Freightliner Cascadias + Internationals equipped with contractor-preferred specs., • Start easy with no credit check + $0 down. Walk in with zero upfront cost and build your business without the financial barriers and credit requirements of traditional ownership., • Simple weekly payments that keep you profitable. Truck payments range from $500-$650/week depending on model, with predictable costs that make budgeting and planning straightforward., • Strong discounts + settlement perks. Enjoy fuel discounts, EZ Pass, direct deposit settlements, and a program built to maximize cash flow and reduce overhead., • End-of-term flexibility. A balloon payment lets you finish the lease your way-giving you options for ownership without locking you into long-term risk., • $5,000 sign-on bonus, • $3,000 referral bonus There is no deadline to apply. Applications are accepted on an ongoing basis. • Valid Class A CDL

We are looking for a motivated and skilled Electrical Industrial Maintenance Technician with strong electrical experience to join our team in South Plainfield, NJ JOB SUMMARY: The Maintenance Technician III supports production operations by performing preventative electrical/mechanical maintenance, troubleshoots and repairs production equipment, and performs repairs and maintenance of facility. Completes preventive maintenance and general maintenance in proper working order while abiding by all specified rules and regulations. ESSENTIAL FUNCTIONS: · Performing troubleshooting and repair on electrical/electronic, hydraulic, pneumatic mechanical systems. · Analyzing, troubleshooting, and repairing equipment. Assist with the service and repairing of more complex equipment. · Ability to repair all electrical wiring, electronic and electrical equipment (24 to 480 Volts) · Complying with applicable regulations according to OSHA and the department’s Safety program. · Troubleshoot, maintain, and repair PLC programs. · Provide scheduled and emergency repairs to production equipment during production shift. · Install and maintain production/facility equipment. · Maintain a clean and organized work area. · Adhere to safety protocols. · Perform other duties as assigned by supervisor. · Regular, reliable, punctual and consistent attendance. Must be able to work regular and/or flexible hours or shifts, overtime, weekends as required. REQUIREMENTS: · High school diploma or equivalent. Technical school preferred. · At least 3 years of mechanical and electrical maintenance experience. · Able to read electrical schematics, and mechanical Drawings · Able to perform electrical troubleshooting and have a knowledge of electrical controls. · Must have the ability to troubleshoot mechanical, hydraulics, electrical panels and electric motors. · Must have basic knowledge of lock out / tag out and PPE. · Experience in operating, troubleshooting and repairing various types of production machinery in a manufacturing environment. · Licensed electrician, preferred. PHYSICAL DEMANDS: · Frequent communication with others to exchange information. · Standing for most of the shift, walking, use hands and fingers to handle or feel objects, tools, or controls. · Reach with hands and arms; stoop, kneel, crouch, or crawl. · Frequent repetition of motions that may include the wrists, hands and/or fingers. · Frequent moving about to accomplish tasks or moving from one worksite to another. · Frequent lifting or moving objects up to 50 pounds in all directions. · Constantly thinking and processing information. · Constantly maintaining concentration and focus on tasks. WORK ENVIRONMENT: · Manufacturing floor with machinery. · Exposure to airborne particles, loud noises, and extreme heat and cold. · Use of personal protection equipment is required. DISCLAIMER: Employee must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodations will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. CSC retains the right to change or assign other duties to this position.

Achieving our goals starts with supporting yours. Grow your career, access top-tier health and wellness benefits, build lasting connections with your team and our customers, and travel the world using our extensive route network. Come join us to create what’s next. Let’s define tomorrow, together. At United, we have some of the best aircraft in the world. Our Technical Operations team is full of aircraft maintenance technicians, engineers, planners, ground equipment and facilities professionals, and supply chain teams that help make sure they’re well taken care of and ready to get our customers to their desired destinations. If you’re ready to work on our planes, join our Tech Ops experts and help keep our fleet in tip-top shape. The sign-on bonus is exclusively for external candidates, internal applicants are not eligible to receive the sign-on incentive. • Requires a thorough knowledge of general building maintenance with emphasis on electrical solving, including AC & DC circuits, high voltage (480), high amperage and some 400 cycle equipment, • Requires experience in industrial wiring and the ability to read and follow wiring schematics and work without supervision, • Journeyman electrical license a plus, • Requires the ability to make low and high voltage repairs to all building electrical equipment, • This includes solving, installation and repair of 110/220/480 volt single and multiphase electrical circuitry and devices, • You should also have some experience in related building equipment and trades, such as air handling units, plumbing and steam fitting, fire systems and conveyors, • Facilities Technicians must be able to work around the clock shifts, including weekends and holidays, in the outdoors in all weather conditions, • Schedules are bid and awarded according to seniority, • Facilities Technicians are represented by the International Brotherhood of Teamsters (IBT), • Salary increases will be administered according to the current IBT/United contract, • New employees are required to join the union within ninety (90) days of employment, • Twenty Four months experience required in at least three of the following areas:, • Electrical (including 480 volt, 3 phase), • Structural (including steel frame construction), • HVAC (including building management systems), • Mechanical (including conveyors), • Plumbing, • PLC electronic/computer controls, • Must have completed high school diploma, GED or equivalent, • Ability to maintain and repair all building disciplines, heavy mechanical and welding, • Work may be indoors or outside or in elevated areas anywhere on airport, • Must be able to climb and work from ladders, and/or walk for extended periods, • Moderate lifting, • Must possess sufficient tooling to perform required tasks, • Computer experience for input and retrieval of data, • Qualified candidates must be immediately available for full time employment, • Must possess a valid, clean, applicable state driver's license What will help you propel from the pack: • Electronics diagnostics and troubleshooting The starting rate for this role is $34.52. This is also a bonus eligible position (i.e. profit sharing). We offer competitive benefits: medical, dental, vision, life, accident & disability, employee assistance program, commuter, paid holidays, paid time off, 401(k), pension and flight privileges (subject to the respective collective bargaining agreement). United Airlines is an Equal Opportunity Employer. We recruit, employ, train, compensate, and promote without regard to race, color, religion, national origin, gender identity, sexual orientation, disability, age, veteran status, or any other protected category under applicable law. We provide reasonable accommodations for applicants and employees with disabilities. To request an accommodation, contact ___

Union Beer Distributors is a family-run beer distributing company that supplies the highest quality beers available across the northeastern United States. Owned and operated by the same family for the past century, our company places unparalleled value on the strong relationship we have with our customers. As a result, we maintain a fine lineup of world-class products, and even more importantly, a strong team of world-class people. Night Order Selectors - Hourly Rate is $18.00 - $23/per hour + $2 Shift Differential & Performance Incentives Starting Pay is $18 but earning potential on the shift does go well above the $23/hour range with time and incentives. Please note: This is a Night position. However, Training will be during the daytime. Interviewing for possible summer start dates. TO FOLLOW UP ON YOUR APPLICATION - Please do not call. Send an email to Key Responsibilities: Order Fulfillment • Accurately build mixed pallets using headset-guided systems and ride-on pallet jacks., • Pick beer, kegs, and other alcohol products efficiently and according to standards., • Handle heavy items (up to 170 lbs) safely and carefully. Warehouse Operations • Load/unload trucks and rotate warehouse stock using equipment safely., • Support inventory counting, repacking, and daily cleanliness efforts., • Follow all supervisor instructions and complete assigned tasks thoroughly. Incentives • Earn incentives of up to $300 per week based on safety, accuracy, and productivity., • Incentives are paid biweekly based on goals thresholds and headset utilization., • Maintain 180+ CE/hour and headset usage over 80% to qualify. Schedule & Training • Sunday–Thursday overnight schedule, from 7:00 PM until work completion., • Mandatory daytime training Monday–Friday for all new hires., • Occasional Friday work as required by business demand. Preferred Qualifications • 2+ years of warehouse or distribution experience., • Familiarity with ride-on pallet jacks or forklifts., • Strong basic math and counting skills., • Consistent, punctual, and motivated work habits., • Comfortable working in cold environments and lifting heavy products., • High school diploma or GED required., • Steel-toe boots required on Day One. Success in This Role Looks Like • Consistently meets and exceeds goals., • Contributes to a positive, accountable warehouse culture., • Delivers accurate and timely order fulfillment for customers., • Demonstrates adaptability, teamwork, and a strong work ethic., • Annual Raises $25.60 after 3 years. Why Join us? Union Beer offers a fast-paced, team-driven environment with long-term growth potential. We value accountability, hustle, and integrity, and reward hard work with bi-weekly incentives, full benefits, and real advancement. If you're ready to work hard and join one of the region’s premier beverage distributors, apply today. This description is not intended as a written or implied contract and may be revised by the company at any time. Furthermore, no verbal contract by the supervisor or other company representative is binding, and employment is at the company. -COMPANY OVERVIEW- Come Join the Union Beer Family— Union Beer Distributors is representative of the market in which we operate. Energetic, dynamic, diverse, competitive, and growing. We are looking for candidates to develop themselves professionally in this marketplace by demonstrating a high capacity to learn and take on new challenges. The Sheehan Family Companies are proud to be an equal opportunity employer. We believe in an inclusive culture that provides mutual respect with salary advancement based on merit and individual performance. Sheehan Family Companies is committed to equal employment opportunities and does not discriminate against any protected class. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. *In applying for this job and providing your phone number, you are authorizing the Sheehan Family Companies to contact you via text message for recruiting purposes. You may opt out of text messaging at any time. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

Job DescriptionGOP Ironworks is a fast growing steel erection company based out of Northern New Jersey. At GOP Ironworks we take a lot of pride in our work ethic and professionalism that we carry from our office to our field crew. We go to great lengths to complete our projects on schedule while maintaining a great work environment with safe working conditions. We are currently expanding our field crew and are looking to hire foremen, connectors, decker's, certified welders and stud welders. We are looking for motivated team players, who come to work with an open mind willing to meet everyday steel erection challenges. People who are thinkers and problem solvers with a willingness to learn.

Job DescriptionDescription: Come join the best heating service company in the NYC area! Controlled Combustion maintains one of the largest and most qualified licensed heating specialist staffs in the industry. Our service personnel, numbering more than 40 people, are members of the Metal Trades Branch-Local 638-A.F.L-C.I.O. That means they are highly qualified, highly competent professionals. In addition, they receive rigorous in-house training as well as ongoing instruction from factory authorized experts and educational institution to keep their technical knowledge current and their maintenance skills sharp. Our shop has earned the prestigious National Board Repair "R" Certificate of Authorization and Symbol Stamp and "U" Certificate of Authorization and Symbol Stamp attesting to our service expertise. Also, our technicians are certified ASME code welders. We maintain a Class "A" installers license in New York City and are licensed throughout the metropolitan area as well. Benefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Retirement plan, • Vision insurance Schedule: • Monday to Friday, • Overtime, • Weekends as needed Experience: • Installation / Repair of Gas Piping: 1 year (Preferred), • Welding: 1 year (Preferred) License/Certification: • Driver's License (Preferred) Work Location: In person Requirements: This position will require the following skills and traits: • Five (5) years experience under a Licensed Master Plumber, • DOB Full Gas Work Card, • Cutting, threading, and fitting black malleable steel piping, • Cutting, soldering, and braising copper piping, • ProPress fittings, • Knowledge of natural gas and fuel oil heating systems, • Knowledge of utility (ConEd and National Grid) procedures is a plus, • Electrical experience is a plus.

Job Description Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. We are currently looking to hire top field welders. Join our team and become a “tankee” traveling throughout our beautiful country! Compensation: Hourly wage based upon experience and skill set, plus per diem (to cover meals and lodging). Normal hourly wage paid for work-related travel (no overtime). Non-union. Occasional prevailing wage. Non-exempt. No PTO or paid holidays. Pay periods are weekly. Direct deposit is available. Benefits: Medical, dental, and vision benefits are available on the first of the month following a 30-day probationary period. Phillips Tank pays approximately 60% and employee pays 40% of medical benefit premiums. Employee pays 100% for vision and dental benefit premiums. Shift: Project work schedules vary. However, a typical work shift is daylight (10 hours per day, 5 days per week). Status: Full-time employee (subject to project availability and work schedules.) NOTE: Compensation, benefits, and other position details are subject to Phillips Tank’s policies and procedures. Travel is Required for this position 75% of the time Day to Day Duties: • Performing arc and torch cutting and gouging., • Using generators, compressors, tuggers, blowers, grinders, and other power and air tools., • Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o’clock and “goat”/tractor)., • Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment., • Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment., • Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations., • Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment., • Operating forklifts, man lifts, boom lifts, and other large lifting equipment., • Knowledge of crane operations (including rigging and signaling), • Reading detailed erection and fabrication drawings., • Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks., • Completing job safety analysis, safety audits, site-specific training, and other safety training., • Follow directions and work professionally with other crew members. \ VCOfBdepFc

Job DescriptionJob Summary We are searching for an experienced and reliable foreman ironworker to run structural steel erection projects in New Jersey, Pennsylvania and Delaware. Responsibilities • Knowledgeable in layout, rigging, connecting, bolting and welding steel by following prints and instructions while guaranteeing all quality and safety standards are met., • Read and follow blueprints, sketches and other instructions., • Efficiently coordinate and manage all aspects of steel erection projects from start to finish, • Track project progress and report to office regularly, • Prep tools and equipment prior to jobs starting Qualifications • High school diploma or its equivalent, • Must be able to lift 70lbs and withstand the physical demands of erecting steel

Job Description Parabit Systems is a full-service engineering, design, integration, and manufacturing company located in the heart of Long Island, just 30 minutes from New York City. Our reach is nationwide, with satellite offices in Miami, Los Angeles, San Francisco, and Chicago. From total security solutions, to self-service kiosks and digital signage, Parabit's mission is to enhance and protect your business. Prerequisites: • 3+ solid years of welding experience, • Ability to weld TIG, • Must have experience working with thin gauge stainless steel, cold-rolled steel, and aluminum, • Self-Motivated with a strong work ethic, • Able to read fabrication drawings, • Able to work with a team as well as stand out on their own, • Work within tight tolerances, • Provide a high-quality product, • Knowledge of sheet metal fabrication, • Welding certification required Benefits: • Medical, • Dental, • Vision, • 401K, • Group Life, • PTO All employment candidates must pass: a NON-DOT Drug screening, Criminal and Credit Background Check and a Driver License Check prior to employment.

Job Description Summary: Parabit Systems, a well-established and rapidly expanding company in the security and self-service equipment industries, is currently seeking an experienced, motivated, innovative, problem solver with a comprehensive understanding of all facets of Metal Work and Finishing. Candidates must have a minimum of three (3) years' experience in the field. The applicant must be proficient in fabricating top quality finished products. Applicants must be able to read and review shop drawings. A strong work ethic and personal commitment to quality and service are essential for this position. Adhering to deadlines and time management skills are essential. We are looking for a candidate with excellent communication skills that is highly organized, reliable, trustworthily, and efficacy driven. Primary Responsibilities: • Job duties include grinding, sanding, and filling uneven surfaces, polishing and coating metal, and etching decorative details., • Removes dents, scratches, and defects from metal surfaces using stroke sanders, hand power tools and pneumatic tools., • Operate a variety of machines for metal finishing., • Follow safety instructions including P.P.E. Fill out paperwork to accurately track traceability on all parts., • Ability to read and review fabrication drawings and specifications., • Consistently work within tight tolerances., • Manufacture high quality products., • Very knowledgeable with sanding, preparation, finishing, application, polishing, repair and manual machining techniques., • Exceptionally knowledgeable in various millwork products such as laminates, solid surfacing, painted finishes, and stainless steel., • Must adhere to established procedures/processes/policies., • Self-Motivated, with a strong work ethic. Education/Experience: • High school diploma., • 3 years' experience in metalwork., • Painting or Powder-Coating knowledge a big plus., • Able to work as a team and motivate employees. Parabit Systems is focused on growth and growing leaders. Parabit Systems is an equal opportunity employer, offering a great work environment, and challenging career opportunities. Please email your resume to . Benefits: • Medical, • Dental, • Vision, • 401K, • Group Life, • PTO All employment candidates must pass: a NON-DOT Drug screening, Criminal and Credit Background Check and a Driver License Check prior to employment.

Job Description G&L Welding Services LLC is seeking an experienced structural steel ironworker to assist with erection, layout, and installation of structural steel on a per diem basis. The ideal candidate has hands-on experience installing steel beams, columns, and structural framing, can interpret structural drawings, and is capable of taking accurate field measurements for fabrication and installation. Projects include residential and commercial structural steel work throughout Long Island and the NYC area. Responsibilities * Assist with erection and installation of structural steel including beams, columns, lintels, and structural framing * Interpret structural drawings and shop drawings * Take accurate field measurements and layouts for fabrication and installation * Perform bolting, rigging, and field welding * Assist with alignment, leveling, and installation of steel members * Coordinate with equipment operators and crew during steel erection * Maintain safe work practices on job sites Requirements * Proven experience with structural steel erection * Ability to read and interpret structural plans * Experience with field layout and measuring * Knowledge of rigging, bolting, and steel connections * Comfortable working with lifts, telehandlers, or similar equipment * Reliable transportation * Strong work ethic and ability to work independently Preferred Qualifications * Welding experience (SMAW / stick welding) * OSHA 10 or OSHA 30 certification * Experience with residential structural steel installations Schedule * Per diem / project-based work depending on workload * Mostly daytime hours About G&L Welding Services LLC G&L Welding Services LLC is a growing metal fabrication and installation company specializing in structural steel and architectural metals for residential and commercial construction projects across Long Island.

Job Description SHOP WELDER / FABRICATOR Special Event Fabrication company seeks shop welders with 2+ year's experience to work as needed on various projects. Secaucus, NJ based shop fully equipped. Working under the supervision of the Metal Shop Foreman, candidates for should possess solid metal working skills, a keen eye for detail, and the ability to interpret artistic and technical drawings. Problem-solving skills and adaptability are crucial, as the work often requires on-the-spot adjustments and creative solutions. Experienced Welders/Fabricators should be well versed in aluminum and steel MIG welding. TIG welding knowledge and ability to read CAD drawings is a plus. ESSENTIAL – REQUIRED SKILLS 1. Perform MIG welding on various steel and aluminum profiles such as box tube, pipe, flat bar etc., 2. Use proper cutting and drilling technique prior to assembly, 3. Understanding of common framing layout and using jigs and clamps to make consistent and repeatable piece, 4. Read and interpret technical drawings, 5. Operate and maintain welding equipment and tools effectively, 6. Collaborate with team members to complete custom fabrication projects on time, 7. Knowledge of proper use of various tools such as angle grinder, mill, chop saw etc., 8. Must have a basic understanding of rigging and safety, comfortable working while on aerial scissor lifts and ladders, 9. Physically capable of undertaking the requirements of the position including lifting, bending, stretching and reaching for long periods of time, 10. Adhere to safety standards and proper handling of equipment and gear, 11. Ability to organize/prioritize and complete multiple tasks simultaneously on the job, 12. Effective time management skills and the ability to work as part of a team in a busy workshop environment GENERAL SHOP DUTIES · Assembly of finished scenery using hand tools such as wrenches and drills · Knowledge of basic carpentry is a plus but not required · Understanding what kind of maintenance each machine requires, using oil to keep machines from rusting and keeping an eye on any tool for wear · SUPPORT WORK-Keeping shop clean. If not currently assigned a task, cleaning and putting tools away · Accept all other duties as assigned by immediate supervisor/manager SAFETY RESPONSIBILITIES To ensure all jobs are set and follow all OSHA and KadaN Standards -Hourly Position with possibility of overtime when necessary. Please note - screenshot resume's will not be accepted Please submit your resume, portfolio and a brief cover letter detailing your experience in scenic painting. Company DescriptionFounded in 1993, Kadan Productions is a full-service production company that specializes in fashion shows and events. We cater to a wide range of clients and work to create the best experience possible in the events industry. KadaN's facilities include a design/production office adjacent to a 80,000 square foot shop. Our facility is fully equipped for woodworking and cabinetry, metal working, upholstering, and scenic painting/faux finish paint treatments. Our facility also houses an extensive rental stock for your event needs. Your resume (not including a portfolio) should be TWO pages or less. More than 2 page will not be looked at.

Job Description Job Title: Structural Steel Ironworker — MTA Project Position Summary: The Employer is seeking experienced and safety‐conscious Structural Steel Ironworkers to perform erection, installation, and repair of structural steel components for Metropolitan Transportation Authority (MTA) projects. The successful candidates will work from engineering drawings and specifications to ensure accurate, timely, and code‐compliant completion of assigned work. Key Responsibilities: • Erect, position, align, secure, and connect structural steel members in accordance with project drawings and specifications., • Install anchor bolts, base plates, stiffeners, splices, and connection hardware; perform bolting, welding, and grinding as required., • Rig and signal for cranes and hoisting equipment; assist riggers and follow qualified rigger directions., • Interpret blueprints, shop drawings, layout marks, and perform field layout using levels, plumb bobs, lasers, and measuring instruments., • Perform on‐site adjustments, shimming, and fit‐up to achieve specified tolerances., • Maintain tools, equipment, and assigned materials; ensure proper care and secure storage., • Adhere to all safety regulations, including fall protection, confined space entry, lockout/tagout, and hot‐work procedures; promptly report hazards or incidents. Minimum Qualifications: • Minimum [5] years of proven experience in structural steel erection on heavy civil or transportation projects., • Demonstrated ability to read and interpret structural drawings and perform field layout., • Competence in bolting, welding (as applicable), rigging, and use of common ironworker tools., • Valid OSHA 10‐hour or 30‐hour Construction Safety Card (specify required).

Job Description At Total Fire Protection, our MISSION is simple, “Embracing Relationships, while keeping you safe, and delivering First Class Service.” You won’t just be a team member at Total Fire Protection, but a valuable contributor. Our diverse team members support one another as we work towards our common goal of bringing Fire and Life Safety to our customers nationwide. Our Company culture has been built on the foundation of our CORE VALUES that define “Who We Are” and we hold each other accountable to these CORE VALUES. Our Five-Alarm Growth represents our commitment to embracing change, evolutionary action, continuous learning, constant improvement, and full engagement. We place the priorities of our Team First and our team members back it up through Do What You Say! execution. Total Fire Protection believes that Do the Right Thing! builds loyalty, trust, and respect because We Care about our team members, our customers, and our community. Every team member brings their own expertise to Total Fire Protection and is encouraged to make their voice heard. We offer a family-oriented culture of teamwork and encourage continuous learning, a diverse atmosphere, and opportunities for career advancement. The Hood and Duct Cleaning Technician will be responsible for the power washing of kitchen exhaust systems including hoods, duct work, filters and exhaust fans. Responsibilities: • Scraping and power washing of kitchen exhaust systems including hoods, duct work, filters and exhaust fans, • Set up and take down of all job sites and equipment including wiping down of stainless-steel hoods, setting up wet/dry vacuums, high pressure hoses pre-sprayers, ladders, hanging plastic sheeting, etc., • Detail cleaning of job site before departure including cleaning floors, counters, back dock, roof, and/or any other work areas on site., • Clean all equipment and tools used on job site and put back in proper place every night., • Communicate clearly and professionally with customers if present at job site., • Follow and comply with all safety rules at all times., • Achieve performance standards indicated for each job., • Perform other duties as assigned., • Ability to effectively communicate with co-workers and managers, • May be required to use constant hand motions, kneel, walk, reach, bend, stretch, carry or lift up to 55 pounds, • Valid Driver's License, • Must speak English/Spanish Pass drug screening and criminal background check, • Be dependable - must be on time!, • Have EXCELLENT attention to detail and work efficiently Total Fire Protection is an Equal Opportunity Employer and does not discriminate against any applicant on the basis of race, color, religion, national origin, gender, marital status, age, disability, sexual orientation, military/veteran status, or any other status protected by Federal or State law or local ordinance.

Job Description Senior Service Mechanic – Fire Sprinkler JOB DESCRIPTION Compensation Range - $ 38.00 - $50.00 At Total Fire Protection, our MISSION is simple, “Embracing Relationships, while keeping you safe, and delivering First Class Service.” You won’t just be a team member at Total Fire Protection, but a valuable contributor. Our diverse team members support one another as we work towards our common goal of bringing Fire and Life Safety to our customers nationwide. Our Company culture has been built on the foundation of our CORE VALUES that define “Who We Are”. CORE VALUES: Location: Reports To: Justin Connors Position Overview: We are seeking an experienced and dynamic Fire Sprinkler Senior Services Mechanic with the ability to install fire sprinkler systems and to inspect and repair sprinkler systems for established customers on a scheduled basis. Key Responsibilities: • Perform inspections, testing, maintenance, and repair of fire sprinkler systems in accordance with NFPA 25, NFPA 13, local fire codes, and AHJ requirements., • Diagnose system deficiencies, impairments, and operational issues; perform necessary repairs to restore systems to proper working conditions., • Conduct inspections on wet, dry, pre-action, and deluge fire sprinkler systems., • Accurately document inspection results, deficiencies, repairs, and recommendations using company reporting systems and required forms., • Identify required corrective actions and communicate repair needs clearly to supervisors, coordinators, or customers., • Execute service and repair work including replacing sprinkler heads, valves, gauges, piping, fittings, and system components., • Perform system shutdowns, drain downs, restorations, and impairment procedures in a safe and compliant manner., • Maintain compliance with OSHA regulations and company safety policies at all job sites., • Communicate professionally with customers, property managers, and AHJs during inspections and service visits., • Maintain service vehicles, tools, and equipment in clean, safe, and working conditions., • Assist with emergency service calls and after-hours response as required., • Support scheduling and coordination efforts by providing accurate field feedback and job status updates., • Stay current with changes in fire sprinkler codes, standards, and industry best practices., • Promote quality workmanship, customer satisfaction, and company standards at all times. Additional Functions: • Other duties as assigned. Experience: • Proven experience performing fire sprinkler inspections and service repairs., • Strong working knowledge of NFPA standards and local fire codes., • Ability to work independently with minimal supervision while managing multiple service tasks. Qualifications: • S12 and S13 Certificate of Fitness (COF) required, • NICET Level II/NICET Level III Certification in Water Based Systems preferred., • Knowledge and experience to perform Monthly Visual Inspections, Quarterly Testing, Semi Annual & Annual Flow Testing of Sprinkler Systems as per NFPA 25., • Minimum 3 years’ experience in the installation, maintenance, inspection and repair of fire sprinklers or related equipment., • Ability to perform 5-Year Hydro-static Testing on the FD Connections (Both Sprinkler and Standpipe) and experience in working with FDNY to witness testing., • Must be able to successfully perform service and repairs on commercial/industrial sprinkler systems., • Must act as the contact customer representative and ascertain equipment/systems problems and residential applications, some which may include:, • Wet (steel, copper and CPVC), • Dry, • Pre-Action, • Deluge, • Fire Pumps, • Knowledge and experience in performing Annual Fire Pump Testing along with Monthly/Weekly Churn Testing., • Back-flow Certification is preferred., • Current valid state driver's license., • HS diploma/ GED equivalent., • Ability to be available when scheduled and on-call as needed including flexible hours and weekends when required., • Experience in reading and interpreting blueprints, submittals, and operational/product manuals., • Capable of performing physical labor to include carrying and moving equipment & tools up to 50-70 lbs., • Able to work in unusual & difficult positions such as climbing ladders, scaffolding & high-lift equipment up to 40-ft, to work within ducts, crawl spaces, above ceilings, etc., • Able to participate in an on-call rotation schedule., • Must be able to demonstrate a high level of customer service., • Must process strong organizational skills, positive attitude, and an ability to learn quickly., • Exceptional communication, negotiation, and interpersonal skills., • Excellent organizational and project management skills., • Strong verbal and written communication, • Strong problem-solving skills and the ability to work under pressure., • Strong attention to detail and commitment to quality, • Ability to work in a fast-paced environment with changing priorities, • Team player with a proactive attitude, • Willingness to learn and grow within the field of fire protection, • Ability to travel as needed Physical Requirements: • The job may require moderate physical labor including activities such as lifting equipment, climbing ladders, or working in confined spaces. Why Join Us: • Competitive salary and benefits package., • Opportunity to make a significant impact in a growing and dynamic industry., • Collaborative and supportive work culture focused on professional growth and development. If you are an accomplished professional with the ability to build relationships, we invite you to apply for this exciting opportunity with our fire and life safety company. Think you have what it takes to be a Total Fire Protection team member? Apply to be a part of this dynamic organization! Total Fire Protection is an Equal Opportunity Employer and does not discriminate against any applicant based on race, color, religion, national origin, gender, marital status, age, disability, sexual orientation, military/veteran status, or any other status protected by Federal or State law or local ordinance.

This job is with Ferguson, an inclusive employer and a member of myGwork – the largest global platform for the LGBTQ+ business community. Please do not contact the recruiter directly. Job Posting: Since 1953, Ferguson has been a source of quality supplies for a variety of industries. Together We Build Better infrastructure, better homes and better businesses. We exist to make our customers' complex projects simple, successful, and sustainable. We proactively solve problems, adapt and grow to continuously serve our customers, communities and each other. Ferguson, a Fortune 500 company, is proud to provide best-in-class products, service and capabilities across the following industries: Commercial/Mechanical, Facilities Supply, Fire and Fabrication, HVAC, Industrial, Residential Trade, Residential Building and Remodel, Waterworks and Residential Digital Commerce. Ferguson has approximately 36,000 associates across 1,700 locations. Ferguson is a community of proud associates who operate with the shared purpose of building something meaningful. You will build a career that you are proud of, at a company you can believe in. Ferguson is currently seeking the right individual to fill an immediate need for a Welder! If you have welding experience coupled with a commitment to great customer service, this is the position for you! Schedule: M-F 6:00am-2:30pm Responsibilities: Weld outlets onto steel pipe to serve the fire sprinkler industry Perform specialty welding tasks; spool pieces, flanges, etc. Inspects work for defects, dimensions, alignment, end preparations, and seam splits in pipe Maintain a clean and safe welding station while conforming to standards of quality and performance Reports all equipment malfunctions, safety issues, and required repairs Qualifications 1 to 3 years of welding experience preferred Proficiency in Microsoft Office applications Strong interpersonal skills and ability to prioritize workload appropriately in order to balance multiple demands and meet timelines Continued focus on improving system efficiencies and business practices Attention to detail, demonstrated integrity, and professionalism Desire to learn new things Ability to thrive in an inclusive environment At Ferguson, we care for each other. We value our well-being just as much as our hard work. We are committed to a holistic approach towards benefits plans and programs that support the mental, physical and financial well-being of our associates. Our competitive offering not only includes benefits like health, dental, vision, paid time off, life insurance and a 401(k) with a company match, but our associates also enjoy additional meaningful and inclusive enhancements that are adaptable to their diverse situations and needs, including mental health coverage, gender affirming and family building benefits, paid parental leave, associate discounts, community involvement opportunities and more! - Pay Range: - $20.89 - $31.33 - Estimated Ranges displayed are Monthly for Salaried roles OR Hourly for all other roles. - This role is Bonus or Incentive Plan eligible. - Ferguson complies with all wage regulations. The starting wage may be higher in certain locations based on local or state wage requirements. - The Company is an equal opportunity employer as well as a government contractor that shall abide by the requirements of 41 CFR 60-300.5(a), which prohibits discrimination against qualified protected Veterans and the requirements of 41 CFR 60-741.5(A), which prohibits discrimination against qualified individuals on the basis of disability. Ferguson Enterprises, LLC. is an equal employment employer F/M/Disability/Vet/Sexual Orientation/Gender Identity. Equal Employment Opportunity and Reasonable Accommodation Information ]]>

Job DescriptionCompany Description Headquartered in Cordova, TN, Stratas Foods is a 50/50 joint venture formed in October 2008 between ACH Food Companies and Archer Daniels Midland Company. Stratas Foods is built on the combined strengths and expertise of these two great parent companies, laid down over the course of over 200 years of combined experience. Stratas will continue to build on this foundation of excellence by providing value added, branded and custom formulated fats and oils solutions to the Food Service, Food Ingredient and Retail sectors. At Stratas Foods we are committed to being the most valued supplier of fats, oils, dressings, mayonnaise and salad dressings to the private label retail bottled oils market in the United States. Manufacturing facilities are located in Dallas and Houston, TX; Decatur and Quincy, IL; Englewood, NJ; Hillside, NJ; Fresno, CA; Nashville, TN; and Valdosta, GA. Corporate offices are located in Memphis, TN. We are committed to maintaining a progressive workplace by utilizing the ideas, skills and talents of all of our employees. We strive to make Stratas Foods a great place to work and are building a team capable of meeting our business goals. Job Description This position is an important part of a high-performance team; a mechanic is involved in the successful daily completion of assigned work either on a priority basis or continuing basis as assigned by the maintenance management team. This position requires minimal direction from management, in a team-based filling and packaging production environment to manufacture food. The ideal candidate will be able to safely perform and guide the repair, replacement, installation, inspection, enhancement, optimization, testing, and troubleshooting to ensure equipment reliability. The Maintenance Mechanic is to work safely and not take short cuts with themselves or any other employee. Responsibilities: • Performing all job duties with safety as a primary objective while following established GMP’s, Safety Regulatory, and Strata's Foodservice procedures and policies, • Supporting full department compliance with safety rules to further our goal of 0 accidents and encouragement of reporting near misses, • Ability to read, understand and create corrective action work orders when required., • Utilize, respond and document all scheduled and unscheduled work orders in the DirectLine CMMS system., • Identifying high-risk safety or productivity issues and working to remedy them, • Performing routine preventative maintenance and repairs to manufacturing equipment as needed, • Servicing and repairing plant facility equipment such as air compressors, heat exchangers, boilers, wastewater system, etc., • Employee must be able to troubleshoot equipment when line operators have problems with the production lines. Finding solutions to line breakdowns can be simple or complex., • Interacting with line operators when troubleshooting problems; must be able to listen and ask the right questions to constructively determine the cause and correct the issue, • Providing assistance to other maintenance employees as able and assigned, • Train other employees in qualified areas, • Look for opportunities to help work get done safer, faster, and more cost effectively, • Contributing to the effort in controlling costs and minimizing wastage in pursuit of daily work, • Support cost control goals of minimum part sparing consistent with production goalsQualifications, • Knowledge of and effective troubleshooting skills on mechanical, pneumatic, hydraulic, and electrical systems, • Proficient in reading schematics and using basic electrical measuring devices, • Must have boiler license, • High school diploma or General Education Degree (GED), • Strong problem solving and math skills, • 5+ years in related experience in oil, chemical, pharmaceutical, food, or process manufacturing facility, • 5+ years of experience in similar role Additional Information The job is performed in a manufacturing plant. Exposure to loud noises, dust, dirt, heat, sparks, oil, and smoke may occur. Personal protective equipment (safety glasses, steel toed shoes, appropriate clothing, hard hat) is required in manufacturing plants. Activities include extended periods of standing and extensive work with various devices and heavy machinery. This position requires the ability to lift up to 50 pounds, climb stairs, bend, kneel, stand for extended periods, work in confined spaces, and work at heights Physical: Ability to walk distances across facility, climb steps and ladders on occasions, sitting at office desk work, sometimes in cooler atmosphere (35-45 degrees), sometimes in engine room (+ 95 degrees in hot months). Ability to lift up to 50 lbs. Sensory: Ability to hear, see, speak, smell and touch well is necessary to perform basic essential task. Hours: 1:30pm - 10:30pm Wage: $41.21 Benefits: Medical, Dental, Vision Stratas Foods is an equal opportunity employer and will not discriminate against any applicant or employee in any manner prohibited by law, including but not limited to, on the basis of race or color, religion, gender, age, genetic information, national origin/ancestry, mental or physical disability, family status/marital status, military/veteran status, and any other legally protected status. Pay Transparency Nondiscrimination Provision-The Employer will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the Employer’s legal duty to furnish information. 41 CFR 60-1.35(c) Stratas Foods Applicant Request for Accommodation Form: Stratas Foods California Privacy Rights Act Policy:

We are representing a globally recognized FORTUNE 500 manufacturing organization who is actively seeking a senior level Manufacturing Manager at their flagship operation due to a recent divisional promotion. Reporting to the Plant Manager, this position has been coined by Executive Leadership as a "high visibility" role. This is a 600+ employee/$500M campus. Primary Responsibilities: • Reporting to the General Manager, the Plant Operations Manager is responsible for leading (5) direct reports while leading multiple value streams., • Directly manage short-term/tactical and long-term/strategic operational activities for department., • Establish and enforce processes and procedures that support safety, quality, financial, and production goals., • Interview, hire, mentor/develop, and evaluate departmental personnel., • Identify and capitalize on opportunities for Lean and Continuous Improvement implementation., • Manage and/or contribute toward capital project activities., • Track and report upon key metrics/KPIs to leadership., • Work cross functionally with other department heads Required Qualifications: • Bachelor’s degree required (engineering/technical preferred)., • 5+ years of leadership experience within industrial manufacturing environments., • Significant experience implementing Lean Six Sigma and Continuous Improvement methodologies., • Significant exposure to metallurgical manufacturing (steel, metals, foundry, melt shop, etc.) processes strongly preferred. Our client offers a generous portfolio of insurance and retirement benefits, an energetic and collaborative culture, and clear advancement opportunities. A comprehensive relocation assistance package is available to especially qualified candidates outside of the immediate geographic area

Company Description CLADIATOR® is a manufacturer of thermally isolated structural cladding attachment systems. Our mission is to accelerate the advancement of smart building design & construction by providing unique and cleverly engineered systems. For Architects & Engineers it means a simple yet robust solution where one core design offers the freedom of limitless creativity. For Installers, working with intuitive installation components means faster, more cost-effective, and ease-of-mind option(s) to complete projects on time. Our universal systems offer improved thermal efficiencies while achieving rain-screen principles such as air & moisture ventilation with the use of long-lasting globally responsible materials. We remain dedicated and driven by our commitment to continuous improvement. Job Summary We are seeking a skilled Design Engineer to join our team, specializing in the creation of detailed shop drawings, fabrication models, and as-built documentation. The role focuses on translating engineering design intent into precise, constructible shop drawings and high-quality 3D models using advanced CAD/BIM software. This position plays a critical role in bridging the gap between conceptual/structural design and field fabrication/installation, ensuring accuracy, compliance, and efficient construction. The ideal candidate has strong technical drafting and modeling skills, attention to detail, and experience producing shop drawings for fabrication and erection in structural steel, concrete, mechanical systems, or similar domains. Key Responsibilities • Develop and produce detailed shop drawings (including plans, sections, elevations, details, schedules, and bills of materials) from engineering sketches, design drawings, specifications, and client requirements., • Create, maintain, and update accurate 3D models (BIM or parametric models) using software such as Revit, SolidWorks, AutoCAD, or similar tools., • Generate fabrication-ready outputs, including part marks, connection details, assembly drawings, erection sequences, and material lists., • Perform scope alignment, coordination reviews, and model-based coordination with other disciplines (architectural & structural) to identify and resolve conflicts early., • Interpret architectural, structural, and engineering drawings to ensure shop drawings align with design intent, building codes, industry standards and project specifications., • Incorporate Design for Manufacturing/Fabrication/Installation principles to optimize constructibility, reduce waste, and improve efficiency., • Review and incorporate feedback from engineers, fabricators, erectors, and project teams; revise drawings and models accordingly., • Prepare supporting documentation such as RFI responses related to modeling/drawing issues, quantity take-offs, and as-built record updates., • Collaborate with project teams, fabricators, and contractors to ensure timely delivery of drawing packages and model files., • Maintain version control, file organization, and documentation standards throughout the project lifecycle., • Participate in quality checks and QA/QC processes for all produced drawings and models. Qualifications & Requirements • Bachelor's degree in Civil Engineering, Structural Engineering, Mechanical Engineering, Architectural Engineering, or a related technical field (or equivalent experience)., • 3–7+ years of hands-on experience in producing shop drawings and 3D modeling for construction/fabrication projects (structural steel, precast, rebar detailing, MEP coordination, or industrial fabrication preferred)., • Proficiency in industry-standard software - AutoCAD, SolidWorks, Revit, Inventor, etc., • Other - Navisworks, Bluebeam or similar for markup/review, • Strong understanding of shop drawing processes, fabrication workflows, and the differences between design drawings and shop/fabrication drawings., • Knowledge of relevant codes, standards, and best practices (ASCE, etc.)., • Excellent attention to detail, spatial visualization skills, and ability to interpret complex technical drawings and specifications., • Effective communication skills for coordinating with engineers, detailers, fabricators, and project stakeholders., • Ability to manage multiple projects and deadlines in a fast-paced environment.

📐 Steel Detailer – Structural & Miscellaneous Steel 📍 Location: Long Island, NY (In-Office) 💰 Salary: $70,000–$90,000 (Based on Experience) 🕒 Type: Full-Time (Must be a US Citizen and Green card holder) The Role As a Steel Detailer, you’ll create shop drawings and 3D models in AutoCAD and Tekla, ensuring accuracy and compliance with specs and AISC standards. You’ll work closely with PMs, surveyors, and fabricators to support successful fabrication and erection. Key Responsibilities • Develop accurate shop drawings & erection details, • Model with AutoCAD and Tekla, • Review construction docs for accuracy, • Ensure AISC/industry compliance, • Support fabrication/installation teams What You Bring • Degree/experience in Engineering, Architecture, or Construction, • 3+ years with AutoCAD & Tekla, • Strong blueprint reading/detailing skills, • Knowledge of AISC standards (preferred), • Detail-oriented, proactive communicator Benefits • $70K–$110K base salary (DOE), • Health insurance, 401(k), and perks, • Growth opportunities within a proven NYC steel leader

Overview We are seeking an experienced Structural Steel Designer / CAD Drafter to support utility and substation infrastructure projects in Bronx, New York. This role requires 5 days per week on-site in the Bronx, New York and will focus on producing detailed structural steel and fabrication drawings, supporting engineering teams, and delivering high-quality, field-ready documentation. This is a hands-on role ideal for someone with strong experience in steel detailing, fabrication packages, and substation structures. Key Responsibilities • Develop and produce detailed structural steel and fabrication drawings, • Convert engineering concepts and models into shop-ready drawings, • Prepare fabrication packages for steel structures and components, • Create installation and field-ready drawings, • Detail steel components including:, • Platforms, • Equipment supports, • Relay houses, • Substation structures, • Coordinate with civil/structural engineers, fabricators, and project teams, • Ensure drawings meet AISC standards and constructability requirements, • Support design updates, revisions, and field changes Required Qualifications • 5+ years experience as a Civil Designer / CAD Drafter / Structural Designer, • Strong experience with:, • Structural steel detailing, • Shop drawings & fabrication drawings, • Fabrication packages, • Proficiency in:, • AutoCAD / 3D CAD, • Tekla Structures, • Advance Steel, • Autodesk Inventor, • Solid understanding of:, • AISC standards, • Structural steel detailing practices, • Constructability and fabrication processes, • Experience working with engineering models and structural layouts, • Ability to coordinate across engineering and fabrication teams, • Strong attention to detail and drawing accuracy

Job Title: Smart Building IoT Project Manager Location: Manhattan, NY Duration: 6 - 12 months Pay Rate: $50/hr - $60/hr Required Skills & Qualifications • 5+ years Project Management experience designing and deploying IoT systems for commercial high-rise buildings, with direct exposure to multi-floor (10+ story) retrofits, • Project Management experience with interacting with construction trades and business stakeholders, • Strong proficiency in IoT and open protocols: MQTT, Zigbee, BACnet, CoAP, Modbus, LONworks, and SNMP for communication including vertical mesh networking and RF signal optimization across concrete/steel floors, • Expert-level knowledge of smart sensors (occupancy, temperature, CO2, energy metering) and hardware integration, including edge gateways and modular floor-level deployments, • Practical experience with cloud platforms: AWS IoT or Azure IoT Hub for segmented, reliable edge-to-cloud data flows, • Deep expertise in Building Automation Systems (BAS/BMS) - Siemens, Honeywell, Schneider, Trane, Johnson Controls - focused on zoned HVAC, energy management, smart lighting, and climate control for targeted floors, • Experience with application tools (AutoCAD, Revit) for electrical schematics, OT Network, panel layouts, modeling, • Proven ability to optimize energy management, HVAC demand response, and lighting systems to support NYC Local Law 97 compliance in occupied high-rise settings, • Experience with Division 25 standards for Integrated Automation, designed to integrate building systems (HVAC, lighting, security, fire, etc.) for smart buildings. Establish standards for inter-system communication while supporting IoT and data analytics addressing facility management., • Experience managing and coordinating partial-floor integrations with legacy central building systems while minimizing tenant disruption

Position Summary: Our client, a leader in precision metal casting and machining, is seeking a highly skilled Machine Shop Manager to oversee daily operations of its CNC and manual machining departments. This role is responsible for planning, coordinating, and improving machining workflows to ensure safety, quality, productivity, and on-time delivery. The ideal candidate is a hands-on leader with strong technical expertise and the ability to train, motivate, and develop machinists and support staff. Key Responsibilities: Operations & Production Management • Oversee day-to-day operations of CNC and manual machine shop departments., • Plan, schedule, and prioritize machining jobs to meet production deadlines., • Ensure efficient setup, operation, and maintenance of machining equipment, including CNC mills/lathes, manual lathes, grinders, and related machinery., • Monitor workflow and adjust staffing/resources to meet customer and internal product release requirements., • Partner with Engineering, Quality, and Foundry operations to resolve production issues. Leadership & Staff Development • Supervise machinists, programmers, and support personnel; assign tasks and manage performance., • Train employees on machining processes, safety procedures, and quality standards., • Foster a culture of teamwork, accountability, and continuous improvement., • Participate in recruiting, hiring, and onboarding of new team members. Quality & Continuous Improvement • Ensure machining meets dimensional, surface, and tolerance specifications., • Review blueprints, CAD models, and process sheets to ensure accurate manufacturing., • Drive root-cause analysis and corrective actions for quality issues., • Implement process improvements, tooling upgrades, and lean manufacturing practices., • Work with Quality Assurance to maintain documentation and compliance with ISO and industry standards. Safety & Compliance • Enforce OSHA and company safety policies., • Identify potential hazards and implement corrective actions., • Ensure proper maintenance and calibration of equipment and tools. Equipment & Resource Management • Coordinate preventive maintenance and repair of machines., • Manage tooling, fixtures, consumables, and supplies to ensure availability., • Recommend capital equipment purchases to support capacity and technology improvements. Qualifications: Required • 5 to 10+ years of machining experience, including CNC programming and operation., • 3 to 5+ years of supervisory or management experience in a machine shop environment., • Strong understanding of GD&T, machining tolerances, and blueprint reading., • Experience machining aluminum, steel, and specialty alloys., • Ability to troubleshoot machining, programming, and tooling issues., • Strong organizational, communication, and leadership skills. Preferred • Experience in a casting or foundry-related machining environment., • Knowledge of Mastercam, Fusion 360, or similar CAM software., • Familiarity with lean manufacturing, 5S, or continuous improvement methodologies., • Experience working in ISO-certified environments. Work Environment & Physical Requirements • Manufacturing shop setting with exposure to machinery, noise, and metalworking materials., • Ability to stand, walk, and move between departments for extended periods., • Ability to lift up to 40 lbs. as needed.

Plumbing Technician & Support Professional Come join the TOTO USA Family! The bathroom is where we start and end our days - it's an everyday luxury we'd never want to do without. TOTO believes that people should have the greatest comfort, convenience and performance design possible in the bathroom. Improving people's lives is what inspires every TOTO innovation. TOTO is one of the world's largest plumbing products manufacturers. We offer a complete line of residential and commercial plumbing fixtures and fittings, faucets, accessories, shower and flush valves, as well as lavatories, toilets, air baths and urinals. More than 1,500 TOTO engineers and their colleagues are committed to achieving the seamless integration of performance, conservation, technology, and innovation. Perks of the job, · Excellent benefit package which includes medical, dental, vision, and life insurance. · Paid vacation, Paid Holiday & 401K, Company match after (1) one year that vests immediately upon participation · Collaborative, dynamic work environment within a fast-paced awesome company MAJOR FUNCTION: Plumbing Technician & Support Professional performs tasks in the after sales service of products based on verbal and written instructions such as but not limited to Standard Operations Procedures (SOPs), Standard Inspection Procedures (SIPs), Work Orders (WO’s). TOOLS AND EQUIPMENT: May include, but not limited to: hand tools, power tools, company van, storage unit, parts kits, voltage meter, testers, water valves, electronic components, after service manuals, company tablet, company phone, company gps, cameras, PPE, safety kits, disposal materials, etc... MATERIALS: May include, but not limited to: Contact with: ABS plastic parts, silicone rubber parts, brass and stainless steel parts, cardboard boxes, wooden pallets, adhesive labels, vitreous china products. Contact with oil lubricant/preservative as well as powder mold release/preservative on vendor parts. Utilizes Windex, alcohol, acetone, Loctite, silicone oil, silicone grease and cleaners such as Lysol. ESSENTIAL DUTIES AND RESPONSIBILITIES: • PLUMBING TECHNICIAN & SUPPORT PROFESSIONAL MAIN DUTY - Performs repairs on Washlets, Neorest, or any TOTO products in the field., • MAIN DUTY - Call Center / Handles inbound customer calls, follow ups, scheduling, troubleshooting, etc., • Handles Tech Service email queues / chat queues as needed., • Showroom visiting, making a relationship, responding their inquiry, • Must be able to travel on behalf of TUS. USA / Canada – Inspection / Repair / Other, • Follows all company policies and procedures, including, but not limited to the employee handbook., • Must locate, read, understand, and follow SOP’s, SIP’s, and/or WO’s., • Performs duties outlined in work instructions such as SOP’s/SIP’s., • May work with raw materials in the process., • Assembles/Inspects various parts in accordance to SOPs/SIP’s., • Maintains accurate inventory count as appropriate in process., • Performs quality checks during the process as outlined in SOP/SIP., • Maintains good housekeeping practices (safe, neat, and orderly work area per 5S program), follows all safety rules and abides by all applicable local, state and federal laws and regulations. Follows and supports ISO related activities, and encourages other associates to follow ISO recommendations., • Assists with training personnel as needed., • Performs other duties as assigned., • Actively contributes to continuous improvement within their area as well as the After Service Department. EDUCATION AND EXPERIENCE: High school diploma, GED or equivalent with a minimum of 3 years mechanically related experience (Plumbing / HVAC / Electronic Repairs / etc.). Must be able to use the Windows platform and all related programs. Must possess basic mathematical and measurement skills (addition, subtraction, multiplication, division and an understanding of fractions and decimals). Ability to read and comprehend basic written instructions and procedures. PHYSICAL REQUIREMENTS: The physical demands of a Plumbing Technician & Support Professional described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Technical Support Specialist regularly required to stand, use hands to finger, handle, twist or feel; and reach with hands and arms., • Frequently required to walk; stoop, kneel or crouch; and speak or listen., • Frequently required to operate a vehicle for an extended amount of time, maintaining an acceptable driver’s abstract., • Lifting as required in job and SOP, • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus., • Where appropriate the use of personal protective equipment (PPE) including, but not limited to, hearing protection, hard hats, disposable gloves, shoe covers, safety vest, safety shoes, and company uniforms/hats., • Repetitive bending/pulling., • Repetitive movements of fingers, hands, wrists and arms., • Ability to lift fifty pounds repeatedly., • Ability to protect a customer’s property, sanitation, and disposal of hazardous material (bio / electronic). WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The work environment consists of an indoor office facility with limited heat in winter, not air conditioned in summer. Summer heat is moderate. Outdoor customer household. Minor exposure to odors from lubricants/preservatives as well as fumes from gas operated vehicles. Moderate noise levels are present. Job requires the use of personal protective equipment (PPE) that may include, but not limited to; protective gloves, ear plugs, safety glasses, protective sleeves, and safety shoes. Minimal possibility of accidents of a minor nature requiring first aid. Regardless of Position/Title, all employees are expected to provide the highest level of customer service and kindness for the TOTO organization. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. As an employee, you are expected to perform other duties, as assigned. TOTO USA is an Equal Opportunity Employer (EEO). All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. TOTO USA provides reasonable accommodations for qualified individuals with disabilities in accordance with the Americans with Disabilities Act (ADA) and other applicable laws. We are committed to maintaining a drug-free workplace.

About Wakefern Wakefern Food Corp. is the largest retailer-owned cooperative in the United States and supports its co-operative members' retail operations, trading under the ShopRite®, Price Rite®, The Fresh Grocer®, Dearborn Markets®, Fairway Markets®, Gourmet Garage®, Di Bruno Brothers®, and Morton William® banners. Employing an innovative approach to wholesale business services, Wakefern focuses on helping the independent retailers compete in a big business world. Providing the tools entrepreneurs need to stay a step ahead of the competition, Wakefern’s co-operative members benefit from the company’s extensive portfolio of services, including innovative technology, private label development, and best in class procurement practices. This role works between the hours of 2:00pm-10:30pm. About You As a member of the Keasbey Logistics Team, the Logistics Administrative Clerk will be responsible for performing various essential administrative functions in support of warehousing operations. These include, but are not limited to, data entry for receiving, store invoicing and delivery administration receipts. Additionally, the Logistics Administrative Clerk will provide the necessary service to warehouse operations when needed and fulfill any request for retail, perishable and grocery warehouse operations. This position supports a 7 day operation and works directly with the Supervisory team to provide seamless product workflow to 400+stores. Core Functions • Assist management to ensure high sanitation/safety standards and smooth warehouse workflow, • Data entry for receiving, store invoicing and delivery administration receipts, • Maintains accurate productivity reports, • Responsible for RF units, keeping batteries charged, and maintains an updated log on all equipment, • Interact with supervision and the affiliated workforce in areas of selection, receiving and housekeeping, • Insures proper adherence to policy and accuracy, • May be assigned additional responsibilities as necessary Knowledge and Skill Requirements • High School graduate or equivalent required, • Knowledge of WMS, Rapid and item maintenance functions is essential, • Strong analytical, organizational, and administrative skills is essential, • Well-developed verbal, written, and interpersonal skills. Ability to communicate professionally, persuasively and effectively, both in person and through email communication, • Flexibility with work schedule: ability to work any 5 out of 7 day schedule, frequent overtime, alternate shifts, holidays and weekends – work week and days off will be based on business needs and may not contain traditional Saturday/Sunday off days. This position schedule is 2:00pm-10:30pm., • Excellent computer skills (Microsoft Office Suite proficiency required to include creating spreadsheets in Excel, • Able to work independently as well as with a team, • Bi-lingual English/Spanish preferred Working Conditions & Physical Demands • Ability to stand, walk, and look up and down for long periods of time, • Ability to work in refrigerated warehouse environment for long periods of time, • Ability to sit and look at computer screens for long periods of times, when required, • Ability to operate mobile equipment (single pallet jack), • Must wear protective steel toe footwear at all times, • Occasional bending, lifting and/or moving a case up to 25 pounds. Core Competencies • Communicate Effectively: Communicates thoughts and ideas in a well-organized manner, encouraging two-way communication., • Build Relationships: Creates cross-functional partnerships through the development and maintenance of constructive and cooperative relationships., • Stay Competitive: Demonstrates a mindset of continuous improvement while exhibiting passion and enthusiasm for their work., • Embrace Change: Looks for new ways of working by supporting advancements in processes and technology., • Develop You: Identifies and capitalizes on opportunities for personal and professional career growth., • Drive for Results: Supports divisional and strategic objectives through achievement of work goals. Compensation and Benefits The salary range for this position is $780 – $970. Placement in the range depends on several factors, including experience, skills, education, geography, and budget considerations. Wakefern is proud to offer a comprehensive benefits package designed to support the health, well-being, and professional development of our Associates. Benefits include medical, dental, and vision coverage, life and disability insurance, a 401(k) retirement plan with company match & annual company contribution, paid time off, holidays, and parental leave. Associates also enjoy access to wellness and family support programs, fitness reimbursement, educational and training opportunities through our corporate university, and a collaborative, team-oriented work environment. Many of these benefits are fully or partially funded by the company, with some subject to eligibility requirements.

Project Manager - Structural & Miscellaneous Steel $70,000 – $130,000 - Brooklyn, NY We are hiring a Project Manager to oversee steel projects from award through fabrication, erection, and close-out. Responsibilities • Manage structural and miscellaneous steel projects end-to-end, • Coordinate with in-house detailing, fabrication, and erection teams, • Review drawings, RFIs, submittals, and change orders, • Track schedules, budgets, and job costs, • Communicate with GCs, engineers, owners, and inspectors Compensation $70,000 – $130,000, dependent on experience, scope, and responsibility level. Details • Location: Brooklyn, NY, • Type: Permanent, full-time, office-based, • Hours: Standard construction hours

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: We are seeking an experienced industrial painter with spray gun expertise to join our container maintenance team. This role is responsible for prepping, painting, and finishing roll-off containers, compactors, and other steel equipment using a spray booth system. The ideal candidate will have hands-on experience with industrial coatings, spray equipment, and shop safety practices. Candidates must also be able to wear and work with a respirator at all times while painting. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Perform surface preparation including grinding, sanding, masking, and cleaning to ensure proper paint adhesion., • Apply primer and finish coats to containers, compactors, and roll-off equipment using spray gun application., • Operate and maintain the spray booth and related equipment in accordance with safety and quality standards., • Mix and match paint colors and coatings to meet job specifications., • Perform daily, weekly, and monthly cleaning and maintenance of the spray booth, filters, and paint equipment., • Follow proper waste disposal and environmental procedures for paint, solvents, and chemicals., • Inspect finished work to ensure coatings meet company quality standards for appearance and durability., • Assist with shop organization, inventory of painting supplies, and reporting of material usage., • Follow all company safety policies, including PPE use, ventilation requirements, and fire hazard precautions. Requirements and Qualifications::, • 2+ years of experience with spray gun painting in an industrial, automotive, or equipment setting., • Familiarity with industrial coatings, primers, and finishing techniques., • Ability to read and follow work orders, safety procedures, and equipment manuals., • Strong attention to detail and commitment to producing high-quality finishes., • Physically able to lift up to 50 lbs and work in a shop/booth environment., • Ability to wear and properly use a respirator for extended periods of time., • Experience painting large steel equipment such as containers, trailers, or heavy machinery., • Knowledge of spray booth operations, airflow systems, and filter maintenance. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $20.00/Hr. Salary Range Maximum: USD $20.00/Hr.

Job Description Are you interested in a new opportunity where you can work independently, make a difference in your community, and delight hundreds of customers every day? Apply to be a Delivery E-Bike Driver today. We offer competitive compensation, benefits, a great company culture, and growth opportunities. Hudson Steel Corp is an Amazon Delivery Service Partner (DSP) looking for enthusiastic, team players to deliver Amazon packages. DSPs are independent businesses that partner with Amazon to deliver packages. Our Delivery Drivers strive to get every Amazon order to the customer’s door on-time. We offer full-time and part-time opportunities. Amazon-branded vehicle provided! This job is delivering using an E-BIKE Shifts range between 4-10 hours per day and shifts are available 7 days per week. Why You’ll Love Working as a Delivery Driver: • Earn more competitive compensation., • Compelling Benefits: paid time off, overtime when business needs, paid training, and health insurance for all full-time employees, • Independence: spend the majority of your day on the road delivering smiles to customers, • Stay active: you’ll be on the move during your shift as you deliver packages from the delivery vehicle to the customer’s doorstep, • Professional growth: we offer career growth opportunities such as moving into Lead Driver, Dispatcher, or Operations Manager roles, and professional development and training, • Team environment: a fun, fast-paced, and supportive company culture, • We need reliable, team work mentality leaders., • Support the team in daily work requirements including supporting other bikers completing their route., • We will deliver in Manhattan, NY in a branded amazon E-Bike., • Ideal candidate would be enthusiastic, has good communication skills and are ready to get the job done., • Safely drive and operate your delivery vehicle at all times., • Use hand held device for routing information, customer delivery information., • Navigate a variety of routes throughout delivery area., • Must be comfortable driving and working in varying weather conditions. Load and unload packages to be delivered, • Be CUSTOMER OBSESSED!! We strive to deliver packages and smiles to our customers., • Perform the following tasks, with or without reasonable accommodation:, • Lift packages up to 50 lbs., • Paid Training, • Paid Overtime, • Health Insurance and Benefits, • 401k with matching, • Paid Time Off, • 5 day work weeks are typical, • 4 Hour shifts are minimum requirement, • Must be at least 21 years old, • Eligible to work in the U.S

Contracting CDL-A Owner Operators • RUN YOUR BUSINESS. KEEP MORE OF IT. - Earn 75% of linehaul + 100% FSC, • REAL FREIGHT. REAL FREEDOM. - No forced dispatch, book the loads you want Tennessee Steel Haulers is built by owner operators, for owner operators. We are a 100% owner-operator company that believes drivers should have control over their freight, their schedule, and their earnings. Here, you're not answering to forced dispatch or chasing empty promises. You're booking quality customer freight, getting paid fast, and backed by a support team that understands what it takes to run a successful flatbed operation. Owner Operator Job Overview • High earning potential, paid the right way. Top owner operators net up to $3,000 per week, with average gross earnings ranging from $5,000-$7,000 per week, depending on freight and lanes., • Strong percentage pay that adds up. Earn 75% of linehaul, plus 100% fuel surcharge, tarping pay, stop pay, and detention pay - so every part of the job is compensated., • Freedom to book the freight that works for you. No forced dispatch. Choose from a variety of flatbed freight lanes and run the loads that make the most sense for your operation., • Limited-time sign-on bonus. Owner Operators can earn a $5,000 sign-on bonus for a limited time - talk to a recruiter for details., • Fast pay and financial flexibility. Same-day settlements on delivered loads, plus fuel discounts, EFS fuel cards, and in-cab scanning to keep cash flowing smoothly., • Operator-focused support. Work with a dedicated driver support specialist, earn $2,000 referral bonuses, and qualify for clean inspection and driver-of-the-month incentives. Driver Requirements • Valid CDL A license, • 1 year or more OTR driving experience (not local), • 6 months or more Flatbed driving experience Work Location: On the road Reference Number: 231800057-030426

Join a fast-paced, growing, and exciting company full of great opportunities! Founded in 1997, IFS is the union affiliate of KBS, the largest privately held provider of facility services in North America. IFS has an immediate full-time opportunity to join our Janitorial Services Team as a General Cleaner in #location (city, state). If you want a flexible schedule to earn some additional income while being part of an exciting, dynamic and growing team with leadership opportunities in a fast-paced environment, then this is the job for you! If this sounds like the right environment for you, then why wait, APPLY TODAY!! Work Schedule: Days/nights vary, including weekends Shifts Available: SUNDAY-WEDNESDAY 6AM-6PM WEDNESDAY-SATURDAY 6PM-6AM Our General Cleaner position performs the following duties within designated work areas, as assigned at the beginning of each shift: • Performs work according to standard procedure and by building's operational schedule., • Cleans rooms, hallways, restrooms, locker rooms, offices, stairways, and windows., • Sweep, remove debris, clean spills, and mop floors throughout the sales floor and seating area., • Regularly check the trash receptacles, emptying as needed, in all areas of the site., • Collect, consolidate, and separate recycling into proper receptacles., • Clean windows and mirrored surfaces; polish stainless steel surfaces., • Dust fixtures, shelves, furniture, and equipment., • Maintain the cleanliness of the customer and team member restrooms (includes cleaning and policing as needed)., • Complete sweep logs, as directed., • Wash walls, ceilings, woodwork, windows, doors, and sills., • Report work accomplished orally or on written work order to supervisor daily., • Lift and move totes up to 49 pounds each, • Ability to lift and carry objects weighing from 15 to 25 pounds., • Regular bending, lifting, stretching and reaching both below the waist and above the head, • Occasionally push and pull wheeled dollies loaded with products up to 100 pounds, • Engage in full manual dexterity in both hands and wrists, • Standing and walking in and around the facility with great frequency for up to 10-12 hours, • Ability to climb ladders and gangways safely and without limitation As a full-time IFS employee (working 30+ hours per week), you may be eligible for a comprehensive benefits package, which can include: • Health Insurance (medical, prescription drug, dental, and vision), • Life Insurance Benefits may vary depending on the applicable Collective Bargaining Agreement (CBA). This position is union-represented, and benefits may be provided either by the company or through the union, depending on the terms of the applicable CBA. IFS considers all applicants for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, gender identity, and expression, marital or military status, or based on an individual's status in any group or class protected by applicable federal, state, or local law. IFS also provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disabilities Act and applicable state and local law.

About USS: United Site Services is the industry leader in comprehensive site services, committed to creating partnerships that help enable our customers’ project and event success. Our deep industry expertise, excellence in process management, and dedication to corporate responsibility are pillars of our value proposition; each supported by tangible, best-practice programs. Our success is fueled by the dedication and collaboration of our diverse team, which includes field technicians, customer care representatives, sales professionals, and functional experts. Each member of our team plays a vital role in ensuring a seamless and reliable experience for our customers. By joining United Site Services, you will be part of an organization that values continuous improvement, teamwork, and excellence in every aspect of our business. Overview: The Bulk Technician driver operates tractors and vacuum trailers servicing municipal, industrial and commercial customers with non-hazardous bulk liquid transportation and disposal services. Execute local pick up and deliveries Monday through Friday, work some weekends but always be home for the end of the day! Responsibilities: • Transport sewerage sludge, industrial wastewater, groundwater and other non-hazardous bulk liquids from customer loading facilities to designated treatment facilities for disposal, • Transport sanitary wastewater and grease trap waste from company owned and operated transfer stations to designated treatment facilities for disposal., • Operate vehicle PTO (power take off) to run vehicle mounted rotary vein vacuum pump to safely load liquids onto vacuum trailer., • Safely drive vehicle on customer property, public roadways and treatment facilities by obeying all traffic and safely laws., • Deploy safety cones and take necessary precautions as required., • Work with company dispatchers, operations managers, safety personnel and customer contact to execute assigned work according to company work plan., • Complete vehicle pre-trip and post-trip inspections daily and immediately report deficiencies to on duty supervisor., • Carefully review daily work assignment to insure instructions are clear and immediately report deficiencies or questions to on duty supervisor., • Wear company issued uniform, safety vest, steel-toed boots, hardhat, safety glasses, hearing protection and any other personal protective equipment as necessary., • Successfully interface with company issued tablet and associated applications including but not limited to those used for hours of service, taking photographs, updating work orders, etc., • Immediately report spills, accidents, injuries, changes in scope of work or any other instance that is beyond the normal course of duty., • Never leave the tractor and trailer unattended while loading and unloading., • Properly execute company work orders and disposal manifests by capturing all necessary dates, times, signatures, waste types and any other necessary information in order to properly execute the assigned work., • Attend regular safety meetings, gate checks, training and other mandatory meetings assigned by on site supervisor., • Follow additional instruction from supervisor as assigned. Qualifications:, • Ability to multi-task and work independently while being safety conscious., • Ability to read and follow map books and or use mapping technology., • Class A Commercial Driver's License, • Tanker and Airbrake Endorsement Physical Requirements:, • Sit while driving and stand while servicing products, • Use hands and fingers to handle, control or feel objects tools or controls, • Repeat the same movements, • See details of objects that are less than a few feet away and also at greater distance, • Speak clearly so customers can understand, • Understand the speech of another person, • Hear sounds and recognize the difference between them, • Walk up to 30 minutes at a time without exertion, • Enter and exit equipment by stepping and kneeling, • Lift up to 40lbs from your waist to your shoulders, • Lift 30lbs from the floor to your head, • Crouch and squat, • Holiday & Paid Time Off (pro-rated for Part-Time employees), • Medical/Pharmacy, • Dental, • Vision, • Employer-Paid Short-Term Disability, • Employer-Paid Employee Basic Life & Accidental Death and Dismemberment, • Voluntary Employee Life & Accidental Death and Dismemberment, • Voluntary Spousal Life, • Voluntary Dependent Life, • Hospital Indemnity, Accident and Critical Illness, • Commuter/Transit Account, • Healthcare Flexible Spending Account, • Dependent Care Flexible Spending Account, • Health Savings Account, • 401(k) with employer match, • Employer-Paid Employee Assistance Program (EAP), • Employee Discounts Salary Range: $28.59 – $40.03 / hour Pay Transparency Statement: At United Site Services, our salary ranges reflect the minimum and maximum base pay for the posted position applicable to all locations across the US. Within the posted salary range, individual pay is determined by the geographic location, job related skills, experience, education, and certifications. Our total compensation package includes base pay plus a comprehensive benefits program. EEO Statement: Some positions may require secure site access and/or domestic air travel. All candidates for positions which require secure site access and/or domestic air travel must possess an acceptable form of identification to comply with state and federal regulations, such as REAL ID-compliant driver’s license or state ID, or U.S. passport. This statement is not intended to require documentation beyond what is acceptable under the federal I-9 form process administered by the U.S. Citizenship and Immigration Services (USCIS); and should not be construed as creating additional employment eligibility verification requirements. United Site Services is an equal opportunity employer. In accordance with applicable law, we prohibit discrimination against any applicant or employee based on any legally-recognized basis, including, but not limited to: race, color, religion, sex (including pregnancy, lactation, childbirth or related medical conditions), sexual orientation , gender identity , age (40 and over), national origin or ancestry, citizenship status, physical or mental disability, genetic information (including testing and characteristics), veteran status, uniformed servicemember status or any other status protected by federal, state or local law. Our commitment to equal opportunity employment applies to all persons involved in our operations and prohibits unlawful discrimination by any employee, including supervisors and co-workers.

Title:Logistics - Shipping and Receiving Clerk Location:, Linden NJ 07036 Duration:3 months Shift: Monday - Friday 8:30am - 5pm Description: The Shipping/Receiving Clerk is responsible for performing any or all tasks associated with the receiving, pick, pack and shipping operations of the regional client supply fulfillment center. These responsibilities include but are not limited to receiving, pallet and box breakdown (with cutting tools), material put away into storage or flow racks, box build, initiating orders on the line, pre-packaging and counting, material transfers, physical inventory, item picking and proper placement, packing with air pillows and tape guns, shipping and affixing labels, pallet preparation, loading trucks and filling/confirming orders. Other duties may include offline filling of orders, labeling, safe operation of material handling equipment such as forklift or pallet jacks, moving/lifting and general cleanup. RESPONSIBILITIES Unload truck • Receives, inspects, verifies, processes and routes all materials into the facility and enters the receipts in the Materials Management software system., • Notifies the Warehouse Supervisor of any discrepancies of materials versus shipping documentation., • Prepares shipments, including documentation, for outbound shipments., • Manages the Returned Goods process according to the Returned Goods SOP., • Delivers stock to the appropriate staging area for departments., • Puts warehoused items in the designated storage areas and rotate stock according to receipt date and expiration dates to ensure proper stock rotation and use prior to expiration., • Identifies any short dated materials upon receipt (less than 30 days of shelf life) and reports to the Warehouse Supervisor to determine any possible actions that may need taken., • Assists in cycle count and full physical inventory., • Complies with all applicable and current Materials and Services Management, Human Resources, Employee Health and Safety, Compliance, OSHA, CLIA, etc. policies and procedures., • Analyzes current procedures in place and makes recommendations for process improvements to the Warehouse Supervisor., • Assists in picking, packing and delivery of both internal and external orders as needed., • Assists in prepacking product in smaller packaging that requires breakdown from bulk packaging., • Assists in record storage and retrieval process as needed., • Performs other duties as required. COMPETENCIES, • Job Knowledge, • High quality of work, • Motivations/initiative, • Organization skills, • Good record keeping skills, • Judgment/problem solving, • Cooperation/teamwork, • Able to speak, read and write in English, • Ability to follow oral and written instructions, • Ability to perform job functions in a safe manner., • Ability to maintain regular attendance to ensure efficient and effective performance of job duties, • Ability to operate a computer, hand cart, pallet jack, flatbed, packing tape gun, and other materials and equipment necessary to complete job tasks., • Ability to work and communicate effectively in a team environment WORKING CONDITIONS • Temperature controlled warehouse, • Will be required to lift, carry, or otherwise move up to 30 lbs., • Follow proper moving and lifting procedures, • Regularly required to stand, walk, • Safety Shoes Required** Lace-up only styles: no pull-ups or loafer-styles Steel toe Metatarsal protection not required Athletic styles are acceptable Waterproof/oil resistant not required High slip resistance preferred We will also ask when the person arrives, there will be a 1 day leniency policy to comply or the person will be asked to leave.

Thank you for your interest in becoming part of the team at Legrand! GENERAL PURPOSE This position is an opportunity for the Co-Op Student to learn and experience multiple facets of Legrand AV operations. This position will be responsible for learning the aspects of the assigned area through a combination of hands-on standard work as well as continuous improvement projects to increase the effectiveness of the organization. DUTIES AND ACCOUNTABILITIES Manufacturing Engineering • Conduct analysis of transactional times and propose improvements for the flow of inbound/outbound Materials, utilizing time studies, value stream mapping and other tools (ie Spaghetti Diagrams), • Learn Lean practices (ie 5S, value stream mapping, Kanban....) in operational and material flows and how to apply them to the Minnesota Operations Center, • Learn 8 step problem solving methodology and implement at least one project during Coop assignment, • Work with assembly leads and Manufacturing Engineers to redesign assembly work cells by using the listed tools above and applying to fixture and layout installation to increase assembly cell productivity and efficiency, • Gain exposure to Bill of Material structure, routings and build spec sheets and how they interrelate for daily activities and how product development gets introduced, through assembly design to normal day to day activities, • Work with Manufacturing Engineers to trouble shoot issue from daily builds to understand and redesign to have a more efficient process of building finished goods General • Consistently support compliance by maintaining the privacy and confidentiality of information, protecting the assets of the organization, acting with ethics and integrity, reporting non-compliance, and adhering to applicable federal, state and local laws and regulations, and the Company's policies and procedures, • Understand workplace hazards and take steps to proactively prevent and report hazards or injuries in the workplace. Cooperate in safety programs, initiatives, and investigations., • Demonstrate our five core values of Integrity, Customer Responsiveness, Innovation, Passionate Contribution & Empowerment and Continuous Improvement JOB REQUIREMENTS Essential Knowledge, Skills and Abilities Required • Excellent interpersonal, oral presentation and written communication skills; professional presence and behavior, • Demonstrated ability to quickly and proficiently understand and absorb new information, • Ability to structure and process qualitative and quantitative data and from it draw insightful conclusions, • Attention to detail, does not let important details slip through the cracks, • Does not cut corners ethically; earns trust and maintains confidence, • Proficient in the use of personal computers, internet and MS Office suite of software including Word, PowerPoint, Excel and Outlook (or related e-mail system), • Ability to work in a team environment, and leverage additional resources as needed, • Ability to interpret standards, specifications, procedures, drawings, etc., • Mechanical aptitude Minimum Education and Experience Required: • Working toward a bachelor's degree in industrial, mechanical or manufacturing engineering, business operations or supply chain management. Special Job Requirements: • May require availability and communication during non-standard business hours to communicate with global team members Preferred Qualifications: • Experience with standard problem solving methodologies, • Familiarity with SAP WORKING CONDITIONS/PHYSICAL DEMANDS • While performing the duties of this job, the employee is regularly required (for the majority of the working day) to sit and make coordinated movements of the fingers for data entry on a keyboard., • Ability to lift up to 40 pounds, • General office environment, • Regular shop assembly/distribution center environment (no air conditioning), • Steel-toed shoes are required for working in this position., • May require regular ground travel to other company facilities Note: Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Legrand is proud to be an Equal Opportunity Employer. You will be considered for this position based upon your experience and education, without regard to race, color, religion, age, sex, national origin, sexual orientation, ancestry, marital status, disability or veteran status. We are committed to creating and maintaining a workforce environment that is free from any form of discrimination or harassment. If you'd like to work in a fun, creative, business-casual environment that offers a comprehensive benefit package, we encourage you to apply! Legrand is an equal employment opportunity employer. For California residents, please see the link for the ______. California law requires that we provide you this notice about the collection and use of your personal Information.

Thank you for your interest in becoming part of the team at Legrand! GENERAL PURPOSE This position is an opportunity for the Intern/Co-op Student to learn and experience multiple facets of Legrand AV operations in Fairfield, NJ. This position will be responsible for learning the aspects of the assigned area through a combination of hands-on standard work as well as continuous improvement projects to increase the effectiveness of the organization. DUTIES AND ACCOUNTABILITIES Procurement, Planning & Sourcing • Manage daily MRP exception reports for assigned material/plant combinations including unconfirmed purchase orders, late purchase orders, over consumed forecasts/safety stocks and purchase order pull ins, • Understand the inputs of the procurement process including safety stocks, sales orders and production demands, • Gain exposure to the supplier performance review process, • In conjunction with a Demand Manager, create a product line forecast using Milestone's statistical models, market influences and sales or product management input, • Generate Average Sales Prices (ASPs) for a given product line and understand how they are used to create an operational financial forecast, • Attend and participate in the monthly Sales & Operations Planning (S&OP) consensus review, • Gain an understanding of the company's global sourcing strategy as well as individual commodity strategies, • Visit suppliers in (3) different commodities and gain an understanding of their business and manufacturing processes and how they integrate with Milestone, • Work with Supply Chain Engineers on monitoring customer feedback and internal notifications for high priority issues., • Gain Knowledge on standard problem solving methodology (i.e. PDCA, DMAIC, 8 step A3, 8D, 5Why, Fishbone diagrams, IS/IS Not analysis, Pareto charts, etc.), and assist in facilitating the investigation, disposition, corrective action and preventive action activities., • Learn and conduct the product and process audits, nonconforming material controls and coordinate measurement device calibration., • Learn and assist in creating quality management system documentations such as process maps, procedures and forms; Learn about ISO 9001 and ISO 14001 standards., • Work with cross-functional and cross-regional teams in continuous improvement projects, to reduce production Defective Parts per Million, to improve product quality and reduce scrap., • Perform data analysis to identify and assist in implementing process improvements which will improve process capability and performance., • Learn about supplier quality management, including supplier audits, ongoing performance evaluation, quality review and Kaizen events., • Conduct analysis of transactional times and propose improvements for the flow of inbound/outbound Materials, utilizing time studies, value stream mapping and other tools (ie Spaghetti Diagrams), • Learn Lean practices (ie 5S, value stream mapping, Kanban....) in operational and material flows and how to apply them to the Minnesota Operations Center, • Learn 8 step problem solving methodology and implement at least one project during Coop assignment, • Work with assembly leads and Manufacturing Engineers to redesign assembly work cells by using the listed tools above and applying to fixture and layout installation to increase assembly cell productivity and efficiency, • Gain exposure to Bill of Material structure, routings and build spec sheets and how they interrelate for daily activities and how product development gets introduced, through assembly design to normal day to day activities, • Evaluation of Primary and Secondary Packaging against proposed specification, recommending improvements to specifications or processes, • Obtaining, compiling and presenting data on existing and alternate packaging materials and processes, • Managing and organizing specification information in appropriate project files. Updating files and communicating updates, • Organizing product and packaging samples for performance testing and overseeing tests process and methods used, • Consistently support compliance by maintaining the privacy and confidentiality of information, protecting the assets of the organization, acting with ethics and integrity, reporting non-compliance, and adhering to applicable federal, state and local laws and regulations, and the Company's policies and procedures, • Understand workplace hazards and take steps to proactively prevent and report hazards or injuries in the workplace. Cooperate in safety programs, initiatives, and investigations., • Demonstrate our five core values of Integrity, Customer Responsiveness, Innovation, Passionate Contribution & Empowerment and Continuous Improvement JOB REQUIREMENTS Essential Knowledge, Skills and Abilities Required • Excellent interpersonal, oral presentation and written communication skills; professional presence and behavior, • Demonstrated ability to quickly and proficiently understand and absorb new information, • Ability to structure and process qualitative and quantitative data and from it draw insightful conclusions, • Attention to detail, does not let important details slip through the cracks, • Does not cut corners ethically; earns trust and maintains confidence, • Proficient in the use of personal computers, internet and MS Office suite of software including Word, PowerPoint, Excel and Outlook (or related e-mail system), • Ability to work in a team environment, and leverage additional resources as needed, • Ability to interpret standards, specifications, procedures, drawings, etc., • Mechanical aptitude Minimum Education and Experience Required: • Working toward a bachelor's degree in industrial, mechanical or manufacturing engineering, business operations or supply chain management. Special Job Requirements: • May require availability and communication during non-standard business hours to communicate with global team members Preferred Qualifications: • Experience with standard problem solving methodologies, • Familiarity with SAP WORKING CONDITIONS/PHYSICAL DEMANDS • While performing the duties of this job, the employee is regularly required (for the majority of the working day) to sit and make coordinated movements of the fingers for data entry on a keyboard., • Ability to lift up to 40 pounds, • General office environment, • Regular shop assembly/distribution center environment (no air conditioning), • Steel-toed shoes are required for working in this position., • May require regular ground travel to other company facilities Note: Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Legrand is proud to be an Equal Opportunity Employer. You will be considered for this position based upon your experience and education, without regard to race, color, religion, age, sex, national origin, sexual orientation, ancestry; marital, disabled or veteran status. We are committed to creating and maintaining a workforce environment that is free from any form of discrimination or harassment. If you'd like to work in a fun, creative, business-casual environment that offers a comprehensive benefit package, we encourage you to apply! Legrand is an equal employment opportunity employer. For California residents, please see the link for the ______. California law requires that we provide you this notice about the collection and use of your personal Information.

Back 12d Electrical Industrial Maintenance Technician III, 1st Shift #SP-849 South Plainfield, New Jersey, United States Apply X Facebook LinkedIn Email Copy We are looking for a motivated and skilled Electrical Industrial Maintenance Technician with strong electrical experience to join our team in South Plainfield, NJ JOB SUMMARY: The Maintenance Technician III supports production operations by performing preventative electrical/mechanical maintenance, troubleshoots and repairs production equipment, and performs repairs and maintenance of facility. Completes preventive maintenance and general maintenance in proper working order while abiding by all specified rules and regulations. ESSENTIAL FUNCTIONS: • Performing troubleshooting and repair on electrical/electronic, hydraulic, pneumatic mechanical systems., • Analyzing, troubleshooting, and repairing equipment. Assist with the service and repairing of more complex equipment., • Ability to repair all electrical wiring, electronic and electrical equipment (24 to 480 Volts), • Complying with applicable regulations according to OSHA and the department's Safety program., • Troubleshoot, maintain, and repair PLC programs., • Provide scheduled and emergency repairs to production equipment during production shift., • Install and maintain production/facility equipment., • Maintain a clean and organized work area., • Adhere to safety protocols., • Perform other duties as assigned by supervisor. Our salary ranges are determined by role, level, and location. The range displayed on the job posting reflects the minimum and maximum target for new hire salaries for this position. The range may vary by location. Within the range, individual pay is determined by additional factors, including job related skills, experience, and relevant education or training.In addition to base salary, this role will be eligible for participation in Canam Steel Corp (CSC)'s benefits programs, including medical, dental, vision, (plus additional voluntary benefits) and 401K (with employer match). REQUIREMENTS: • High school diploma or equivalent. Technical school preferred., • At least 3 years of mechanical and electrical maintenance experience., • Able to read electrical schematics, and mechanical Drawings, • Able to perform electrical troubleshooting and have a knowledge of electrical controls., • Must have the ability to troubleshoot mechanical, hydraulics, electrical panels and electric motors., • Must have basic knowledge of lock out / tag out and PPE., • Experience in operating, troubleshooting and repairing various types of production machinery in a manufacturing environment., • Licensed electrician, preferred. PHYSICAL DEMANDS: • Frequent communication with others to exchange information., • Standing for most of the shift, walking, use hands and fingers to handle or feel objects, tools, or controls., • Reach with hands and arms; stoop, kneel, crouch, or crawl., • Frequent repetition of motions that may include the wrists, hands and/or fingers., • Frequent moving about to accomplish tasks or moving from one worksite to another., • Frequent lifting or moving objects up to 50 pounds in all directions., • Constantly thinking and processing information., • Constantly maintaining concentration and focus on tasks. WORK ENVIRONMENT: • Manufacturing floor with machinery., • Exposure to airborne particles, loud noises, and extreme heat and cold., • Use of personal protection equipment is required. DISCLAIMER: Employee must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodations will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. CSC retains the right to change or assign other duties to this position. 7am-3:30pm OT as needed

IMEG is hiring a Structural Project Designer in New York, NY, to lead design efforts as a project manager or lead engineer on low to moderate complexity projects while partnering with senior staff on larger, higher-complexity work. In this role, you'll support engineering analysis, design, and implementation oversight of structural systems for buildings and other structures, providing engineering solutions and advice that drive positive client outcomes. You'll also work within the project's monetary budget while training, mentoring, and collaborating with cross-functional teams to meet project goals and client expectations. Principal Responsibilities • Lead analysis and design of structural systems using a variety of building materials, • Utilize engineering software and tools to develop designs, specifications, and calculations per code requirements and IMEG standards, • Partner with clients to gather requirements, communicate technical information, and build strong working relationships, • Lead project planning, budgeting, and scheduling to meet deadlines and objectives, • Document design decisions and client instructions; monitor design progress related to percent complete and fee expended, • Analyze engineering challenges and collaborate with senior engineers and consultants to develop practical solutions, • Provide in-process reviews of structural design, calculations, and specifications, • Implement IMEG quality control processes to meet IMEG quality standards, industry standards, and client requirements, • Collaborate with multidisciplinary teams (engineers, architects, and project managers) to deliver integrated solutions aligned with project goals, • Identify potential project issues and seek advice from the Project Manager, • Oversee projects through bidding, design, and construction administration phases, while prioritizing safety and acting in an ethical and professional manner, • Stay up to date with industry trends and emerging technologies; contribute to research, development, and innovation efforts within IMEG Required Qualifications and Skills • Bachelor of Science (BS) Degree in Civil, Structural, or Architectural Engineering, or equivalent, required, • Master's Degree (MS) in Structural Engineering preferred, • Engineering In Training (EIT) required, • Engineering In Training (EIT) Certification preferred, • 3 years of experience minimum required, 4 preferred, in the building design consulting industry OR, • Associates degree, or certificate, in Building Information Modeling (BIM) or Engineering preferred, • 7 years of experience minimum required, 8 preferred, in the building design consulting or construction industry, • Proficiency in design techniques, tools, and concepts involved in the production of technical plans and specifications, • Strong technical and analytical skills including proficiency of principles in mechanics and materials, load paths, design techniques, design standards including steel, concrete, wood, masonry, and concepts involved in structural systems of buildings and structures, • Ability to train and mentor less experienced staff, • Proficiency of industry standard engineering software and tools including structural engineering design and analysis software, • Excellent communication and interpersonal skills; Ability to clearly communicate in both oral and written communication to individuals or groups, • Ability to work collaboratively in a team environment, • Attention to detail and problem-solving skills, • Eagerness to adapt to new challenges, • Proficiency in the use of BIM software, • Proficient with MS Office Suite including but not limited to Word, Excel, and Outlook Why Join Us IMEG puts people first-with a strong focus on career growth, work-life balance, and meaningful impact. As a 100% employee-owned firm, we offer the resources of a national design leader with the close-knit culture of a local office. You'll collaborate across disciplines, contribute to innovative, sustainable projects, and shape the communities we serve. Join a team where your ideas are valued, your development is supported, and your work truly matters. You'll join a structural practice that supports a wide range of project types and collaborates closely with architects and builders to solve schedule, cost, and complexity challenges. Structural Team Highlights • IMEG's structural team (nearly 400 strong) brings unique architectural visions to life by providing safe, efficient structural solutions that achieve project goals, even amid complexity, • Experience spanning foundational design and framing systems (steel, concrete, timber, etc.), seismic engineering, facade support, and long-span specialty structures, • Collaboration across disciplines to overcome schedule, cost, and complexity challenges, • Expertise that can include vibration analysis, parametric modeling, disaster/emergency structural services, and mass timber and innovative materials design Locations available: New York, NY State of New York Salary Range: $105,320 - $115,000 Minimums and maximums may vary based on location. Individual pay will be based on several factors including experience, knowledge, skills, and abilities of the applicant. Other rewards may include annual bonuses and stock ownership options. In addition, IMEG Corp. provides a variety of benefits to employees, including health insurance coverage, an employee wellness program, life and disability insurance, a retirement savings plan, paid holidays, and paid time off (PTO). This information is being provided in compliance with local laws. Additional information regarding employee benefits may be found on our company website at ___ Apply today to help deliver code-compliant structural solutions that support great projects and positive outcomes for our clients and communities. IMEG, an employee-owned corporation, is committed to investing in employees' futures through professional development programs and opportunities for career advancement. We offer a comprehensive benefits package including generous PTO, flexible schedule, and assistance with tuition reimbursement. Additionally, employees are eligible to enroll in health, dental, vision, and life insurance on their first day of employment. Want to learn more about IMEG and our other amazing career opportunities? Please visit ___. IMEG is committed to providing equal employment opportunities in all employment practices, without regard torace, color, religion, sex (including sexual orientation or gender identity), gender, national origin, disability, age, genetic information(including family medical history), parental status (including pregnancy, childbirth or related medical conditions includinglactation), ethnic origin, hair type (including hairstyle or hair texture), citizenship status, marital status, military service, veteran'sstatus, political affiliation, non-merit-based factors, or any other characteristic protected by law. In accordance with antidiscrimination law, it is the purpose of this policy to put into effect these principles and mandates. IMEG prohibitsdiscrimination and harassment of any type. IMEG conforms to the spirit as well as to the letter of all applicable laws andregulations. All applicants have the right to request access, correction, and deletion of their personal information from our system. In order to make a request, please email .

Responsibilities ECS Limited is offering a unique opportunity for a talented and certified Construction Materials Testing (CMT) Senior Field Technicianto join our team. We offer opportunities for professional development with additional incentives as you advance your skills and gain experience. In this role, you'll continue to collaborate and develop with experienced project management professionals to safely perform a variety of tasks in Field Services department. Responsibilities • Field Activities: Perform observation, testing, sampling, and inspection of materials, including soils, aggregates, concrete, grout, masonry, asphalt, and structural steel placement on construction sites; Execute tasks based on project requirements under the guidance of other senior technicians, staff professionals, and project managers., • Testing Procedures: Conduct routine field tests for soils, aggregates, concrete, grout, masonry, asphalt, and structural steel placement using various methodologies and testing equipment following industry standards and compliance., • Data Collection: Perform calculations and data reduction based on sampling, test results, and inspections; Engage in drafting and other administrative duties as required; Develop skills in documentation and prepare field reports that document site observations for field work performed., • Communication: Maintain daily communication with site contractors, other technicians, and project managers; Keep supervisor and project teams informed of changing site conditions and additional testing requested; Attend project meetings with senior staff as requested., • Training and Development: Receive training in ECS methodology for project observations, inspections, and testing; Document findings with precision in accordance with accepted engineering practices. Career Development As your experience grows, ECS will: • Support you in further enhancing your professional skills. Required Qualifications • 2+ years of related experience., • High School diploma or GED., • Must have and be willing to maintain current basic level certifications and an additional 2 advanced certifications., • OSHA 10 is a plus., • Position requires carrying 40 - 70 lbs multiple times a day or occasionally lifting 85 lbs to waist height., • Must have valid driver's license and insurance., • Must provide suitable transportation for use on job sites - Mileage will be reimbursed., • Strong communication skills (speaking, reading, and writing)., • Excellent understanding of heavy construction safety, practices, and procedures., • Ability to work effectively with clients, peers, and supervisors., • Proficiency with electronic devices such as phones, tablets, and laptops., • Strong math skills with the ability to read maps, follow directions, and interpret engineering and construction plans. Military Qualifications: • The following US Military ranks will qualify for this position IF they also meet the education, certification, and licenses requirements from the above section titled "Required Qualifications": ECS Group of Companies (ECS) was founded in 1988 with the goal to raise the standards of professional engineering consulting. Today, we are a leader in geotechnical, construction materials, environmental and facilities consulting services. We are employee-owned with more than 3,000 employees in 100+ offices and testing facilities coast to coast. ECS is currently ranked #66 in Engineering News-Record's Top 500 Design Firms (April 2025), #148 in Engineering News-Record's Top 200 Environmental Firms (October 2025) and #50 in Zweig Group's Hot Firm List (May 2025). For additional information about ECS, visit: ___ ECS is an Equal Opportunity Employer. To learn more, click___.

Yonkers Contracting Company, Inc. is seeking a qualified structural steel superintendent with a minimum of 10 years of relevant experience. Responsibilities • Manage and supervise ironworker crews during erection or demolition of structural steel operations for projects in New York, New Jersey, and Connecticut, • Verify quality of structural steel workmanship with drawings and specifications, • Coordinate with fabricators to ensure timely and correct delivery of material to site, • Maintain up to date knowledge of contract specifications and scopes of work, • Ensure each operation is compliant with contract drawings and specifications Qualifications • Knowledge of local union work rules, • Attention to detail, ability to read, review and correct shop and erection drawings, • OSHA 10 and/or OSHA 30, • Strong communication, time management, and organizational skills, • Ability to manage multiple tasks and work independently, • Proven ability to collaborate and function effectively as part of a team Compensation • Medical and dental insurance, • 401(k), • Student loan reimbursement and/or tuition reimbursement, • Vehicle stipend, toll reimbursement, gas card, • Yearly bonus About Yonkers Contracting Company, Inc. Founded in 1945, Yonkers Contracting Company is a leading heavy civil construction contractor specializing in major infrastructure projects throughout the New York, New Jersey, Connecticut region. Our portfolio includes highways, bridges, rail systems, transit facilities, site work, foundations, energy and environmental projects. We are committed to safety, quality, innovation, and delivering excellence in all aspects of our work.

Architectural Glass & Metal company located in Queens is looking to fill a position of Purchasing Agent. This position is not remote and is in office. Construction experience is required, architectural metal and glass experience strongly preferred. Position Responsibilities: • Handle all specialty buys including, but not limited to glass, hardware, gaskets, Etc., • Solid knowledge of specific materials and suppliers – glazing IGU, glazing coatings, aluminum extrusions, architectural windows, various metal panel finishes including aluminum and stainless steel, • Create purchase orders for the acquisition of materials utilizing internal purchasing practices, • Daily interaction with external suppliers for procurement of construction/fabrication goods and services, • Analyze and evaluate proposals, • Perform price analysis, • Develop and maintain strategic relationships, • Lead negotiations, agreement terms, PO documentation, and invoice reconciliation, • Ensure continuous flow of materials to support production requirements in the most efficient and cost-effective manner, • Needs to be competent WITH CUSTOMS CLEARANCE PROCEDURES., • Proficient at reading and understanding metal fabrication & construction blueprints, • Punctuality is a must!

Job Summary The Quality Inspector is responsible for ensuring that all construction activities and deliverables meet the required standards of quality as specified by the project contract and local building regulations. This role involves the development, implementation, and monitoring of quality control processes and procedures across all phases of construction, from initial planning to project completion. The Quality Inspector works closely with the quality manager, site manager, contractors, engineers, and inspectors to ensure that the construction site adheres to industry standards and that any issues are identified and resolved promptly Job Description • Follow the quality assurance (QA) and quality control (QC) plan in alignment with the project’s contract requirements and industry standards., • Monitor the quality of materials, construction methods, and finished products, enforcing inspection and testing procedures., • Ensure compliance with local building codes, safety regulations, and environmental standards., • Conduct regular site inspections to assess workmanship, adherence to design specifications, and materials used., • Oversee testing and verification of materials, including concrete, steel, and other construction materials, ensuring that they meet required standards., • Coordinate with third-party inspectors and auditors as necessary., • Identify and document any non-conformities or deficiencies in construction practices or materials., • Work with the site management team to develop corrective actions and track the implementation of these actions., • Ensure any defective work or materials are addressed promptly and that rework meets the quality standards., • Support comprehensive documentation of quality control activities, including inspection reports, test results, and corrective actions taken., • Provide regular updates to the quality manager on quality-related issues and progress., • Complete required documentation and file in accordance with project guidelines and regulatory requirements., • Liaise with site manager, quality manager, contractors, subcontractors, and suppliers to ensure that all parties understand the quality requirements., • Promote a culture of continuous improvement by encouraging quality awareness and compliance among the construction team., • Ensure that the construction process follows international standards (such as ISO 9001) and industry best practices., • Maintain up-to-date knowledge of relevant quality standards and regulatory changes that may affect the construction process. Skills Required • Proven experience as a Quality Inspector in the construction industry., • In-depth knowledge of construction materials, methods, and quality standards (e.g., ISO 9001)., • Strong understanding of construction regulations, building codes, and safety requirements., • Excellent analytical skills and attention to detail., • Effective communication., • Proficiency in construction management software and tools., • Certifications in quality management are an advantage., • Self-motivated, maintain high professional standards., • Ability to communicate at all levels of the organization, and ability to handle highly confidential information. Education/Training/Certifications • High School Degree or GED GAS Global Services LLC is an Equal Opportunity Employer. Employment Decision are made without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, gender identity or any other factors protected by applicable federal, state or local laws. JOB-10046130

Job Description Title: ASSISTANT FARM MANAGER (Jacob K. Javits Convention Center) Location: NEW YORK, NY Job Type: Full-Time, Seasonal ABOUT THE POSITION: Brooklyn Grange, the world's leading soil-based rooftop farming business, is seeking an experienced and knowledgeable Assistant Farm Manager to help manage the 1-acre Steel Farm located atop the Jacob K. Javits Center. Reporting directly to the site Farm Manager, the Assistant Farm Manager supports a range of production activities, including crew management, greenhouse propagation, bed preparation, cultivation and harvest, packing vegetable orders, compost management, pest and disease treatment, and occasional infrastructure projects. The farm is a fast-paced, public-facing environment where quality, efficiency, and attention to detail are essential. The Assistant Farm Manager will be responsible for helping to manage all day-to-day operations, including: staff oversight, crop planning, management of seeds and supplies, propagation, general plant care, cultivation and harvest, soil management, pest control, irrigation maintenance, management of on-site composting, upholding food safety standards, helping with data collection and recordkeeping, coordinating with onsite and offsite team members, helping with infrastructure projects and maintenance, winterizing the farm as the season winds down, and maintaining a clean, organized, and safe space across the rooftop. The Assistant Farm Manager should be personable, an excellent communicator, and motivated to take initiative and responsibility. A team player, the ideal candidate demonstrates good judgment and maturity in leading a team, motivates by example, and helps uphold Brooklyn Grange’s culture of respect and inclusion. The Assistant Farm Manager should also continually be proactive in tending to the farm and the rooftop, and improving upon systems. SCHEDULE: The Assistant Farm Manager is required to be on site 30-40+ hours during the growing season, starting in April through mid-November with many early mornings during peak season. Scheduled work for the position will typically be Monday through Friday, with occasional weekend hours during the peak growing season to check the greenhouse. ABOUT THE COMPANY: Brooklyn Grange is the world's largest green roof farming and intensive green roof business. We grow vegetables, and we design/install/maintain green roofs, gardens, and farms for clients ranging from private homes, to corporate headquarters, to non-profit organizations and schools. We also host programming & events on our rooftop farms in Brooklyn, NY. All three of our departments -- Farm, Programming & Events department, and our Design/Build/Maintenance department -- are part of a close-knit, nimble team. Working with Brooklyn Grange means working alongside a diverse team of extraordinary and knowledgeable individuals who share a common goal of making their city a greener, more sustainable, delicious, and equitable place to live. KEY RESPONSIBILITIES: * Assist the Farm Manager with all farm-related activities, including: propagation, planting and cultivation, and keeping related records and data. Manage disease and pest concerns, maintain soil health, set up and maintain irrigation. * Work alongside the Farm Manager in crop planning and assist in keeping related records and data (e.g. update planting logs). * Assist the Farm Manager and BG team with rooftop facilities maintenance, ensuring a clean, well-functioning, and safe space (both farmed and non-farmed spaces) at all times. Undertake facilities-related improvements and adhere to maintenance schedules and best practices. Assist with perennial plant care on the roof, as necessary. * Help train, support, and manage farm crew on all field duties and farm practices. Be a pace-setter and an advocate for the farm team. Work with Farm Manager to create daily task-lists and understand and set the flow of the week as the season moves from Spring to peak-Summer to Fall. * Engage in manual field work, including bed preparation, hand-weeding, harvesting and packing produce, etc. As this is a rooftop farm, only small machinery and hand tools are available. * Receive visitors to the farm with professionalism and hospitality, while maintaining company rules and regulations. * Work closely with other departments, especially the Programming & Events department, to ensure the smooth operation of the business, maintain the farm as an events-ready space, and communicate proactively about issues that may impact the operations of other departments. * Harvest, wash, and pack produce for orders; communicate with the various outlets that receive our produce, including community partners, CSA members, and wholesale accounts. THE IDEAL CANDIDATE: * Has undergone training in organic or low-input vegetable production, and has at least 2 seasons of relevant experience with production farming (or equivalent). * Has experience with succession planting, crop rotation, composting, soil health, and harvesting. * Is familiar with tools such as seeders, bed rollers, hand tillers, etc. * Is able to work independently, be very self-motivated, and possesses a great work ethic. Can both take initiative and work collaboratively. * Possesses excellent leadership skills, can take direction, works well with others and can motivate a team, and feels strongly about working in an environment that is open and welcoming to all. * Is organized and professional, responds to emails in a timely fashion, can navigate Google Drive and Slack, record and enter data into spreadsheets, etc. * Takes pride in maintaining clean, welcoming, and aesthetically driven work and farm spaces. * Must enjoy working outdoors in any weather. * Is able to lift 50 lbs repeatedly, and to squat, bend over, and reach for extended periods of time. * Experience cultivating flowers and making bouquets/floral arrangements is a plus. * Ability to speak Mandarin and/or Spanish is a plus. * Driver’s license and experience driving in NYC preferred. WHAT WE'RE OFFERING: * A progressive work environment that values teamwork, learning, and a solutions-oriented mindset. We work hard, we problem-solve, and we aim to approach challenges with curiosity and care. * Hourly Rate: $25.58 - (Rates of pay are subject to applicable prevailing wage requirements.) * Employer-sponsored medical, dental, and vision benefits available, effective the first full month following hire * Employer matched up to 3% - Simple IRA, Retirement Savings Plan * Generous Paid Time Off * 5 days of Sick and Safe Leave annually * Discounted Employee CSA offering * Access to NYC’s most delicious vegetables when in season To Apply: Please submit a resume and brief cover letter outlining your relevant work experience and interest in the position. Minimum of two professional references required. Brooklyn Grange is committed to supporting a diverse and multicultural team, and fostering an inclusive workplace. We consider all individuals for employment without regard to race, religion, age, sex, gender, disability, national origin, alienage or citizenship status, sexual orientation, familial status, military status, or any other characteristic protected by applicable federal, state, or local law. If you don’t meet every requirement of this position, but you are excited about the role and your past/lived experience meet some of the requirements, we encourage you to apply. We strongly encourage applications from candidates of all backgrounds.

Company Description Lions Group NYC is a family-owned and managed real estate development firm with over three decades of experience in residential, commercial, and retail property development. Based in New York, the company constructed and operates a portfolio valued at over $1 billion and operates over 500,000 square feet of luxury condominiums, rental buildings, and commercial spaces across the Metropolitan area and the Gold Coast of Long Island. Renowned for its commitment to excellence in design and construction, Lions Group NYC prioritizes maximizing returns for investors while delivering superior results. The team’s dedication and meticulous planning have positioned the company as a leading real estate developer in the competitive New York market. Role Description This is a full-time, Senior Construction Project Manager position, for a job located in either Long Island, Brooklyn, or Queens. The Project Manager will oversee and manage all aspects of the construction project. The project will consist of budget of $25M-$50M, and will be a mid-rise construction project. Construction Project Manager is expected to ensure they are completed on time, within budget, and to the highest quality standards. Key responsibilities include project planning, coordinating resources, managing budgets, and maintaining effective communication between team members and stakeholders. The role requires oversight of construction schedules, compliance with safety regulations, and resolution of project challenges as they arise. Qualifications • Strong expertise in Construction Project Management, • Proficiency in Project Coordination and general Project Management, • Demonstrated experience in Budgeting and cost management within construction projects, • Excellent problem-solving, organizational, and leadership skills, • Ability to manage multiple projects and meet deadlines, • 5–10+ years of experience in construction project management, with at least one full-cycle mid-rise (8–20 story) project completed, • Experience managing ground-up multifamily or mixed-use developments (NYC experience strongly preferred), • Proven ability to take a project from pre-development through TCO/closeout, • Strong familiarity with NYC DOB, permitting, and inspection processes, • Experience coordinating with expediters, architects, and engineers in NYC, • Understanding of NYC zoning constraints and construction staging challenges, • Ability to read and interpret architectural, structural, and MEP drawings, • Strong understanding of construction sequencing and scheduling, • Experience with value engineering and cost control, • Ability to manage subcontractors, including contract enforcement, • Familiarity with mid-rise building systems (concrete, steel, facade systems, MEP infrastructure), • Experience managing project budgets ($20M–$100M+ range preferred), • Ability to track and manage: Cost reports, change orders, and pay applications, • Familiarity with construction contracts (AIA or similar), • Experience coordinating with lenders, inspectors, and draw processes, • Proficiency in: Procore, Excel, Microsoft Project, and Bluebeam., • OSHA 30 certification

Position: Structural Engineer / Professional Engineer We are one of the largest scaffolding, hoisting, access, safety, and protection companies in New York and are looking for skilled individuals to join our team who are knowledgeable, innovative, and ambitious. Our focus on people and relationships, and our uncompromising commitment to health and safety, allows us to acquire some of the best talent in the industry. Our knowledgeable and talented personnel set us apart from the competition with an unrivaled attention to detail and superior customer service. We can tackle any job while still adhering to the highest standards of safety and quality. Key Responsibilities: · Design, analyze, and produce sealed engineered drawings for temporary structures, including but not limited to Common Platform Hoist Complexes, scaffold, overhead protection, and work platforms. · Inspect and sign off on all structures noted above. · Design, analyze, and produce sealed engineered drawings for temporary structures using steel, aluminum, lumber, and concrete. · Work closely with designers and PMs to provide optimized designs & solutions that meet the client's needs. · Liaise with other internal technical members, project managers, quality staff, production staff, and external technical persons, including consulting engineers, contractors, and inspectors. · Oversee, review, and approve internally produced fabrication drawings. · Review engineered construction design drawings for accuracy, completeness, and constructability. Skills & Requirements: • Degree in Civil or Structural Engineering accredited by the various States' PE governing boards., • 2 to 5 years of experience as a Structural Engineer. • Be proficient in English, both verbally and in writing., • Must have proven structural design and analysis experience., • Must be willing to obtain PE licensing and seal documents in various states., • Must have experience with Microsoft Office products., • Must be willing to travel across North America Position & Location · Full-time position · Position will be based in New Rochelle, NY · Includes standard company vacation, health, and dental benefits. · Salary based on experience ($80k to $150k).

Job DescriptionPosition Description: Founded in 1994 by two heart surgeons, Dr. Praegers carries a legacy of encouraging sensible eating through nutritious and delicious frozen foods. Our journey began with a simple mission: to promote wholesome eating that is easy and delightful. Learn more about our story: Dr. Praegers History Company Culture is at Our Core: Our Core Values are more than just words, they are a way of life. We know that companies with a strong culture and a higher purpose perform better in the long run. Do our values speak to you? GRIT \tRise to the Challenge \tBe Determined \tEncourage Risk-Taking IMPACT \tCollaborate for Impact \tContinuously Improve \tSpeed over Perfection CARING \tDemonstrate Ownership \tCelebrate Achievements \tFoster Belonging WHAT YOU WILL BE DOING: Weigh raw materials using company formulas to measure and stage various dry and liquid ingredients in preparation of production. Job Responsibilities \tWeigh ingredients according to formula using proper weighing techniques. \tPlace measured ingredients into V-mag dump buggy, plastic bag or in mixer. \tUse sensory observations to spot potential quality issues and inform supervisor accordingly. \tKeep written batch records of raw materials where necessary. This information must be recorded for all batches mixed. \tUtilize computers to print raw material labels, weigh labels, and formula labels. \tMaintain production flow between spice room and mixers. \tScale up various raw material ingredients to specified quantities. \tKeep allergens separate and follow allergen tools color code. \tMaintain location accuracy for all raw materials in the spice room and staging areas. \tIssue all raw materials to specified mixing locations. \tCheck all expiration dates and use FIFO for all raw materials. \tReturn all raw materials that are not going to be used to return location. \tMaintain a clean and organized spiced room environment. \tUse of half face or full-face respirator \tWill require GMP clothing such as steel toe shoes, lab jacket, glasses, hairnets, beard guard and earplugs. Qualifications/skills \tAble to lift and pour 50 lbs. unassisted. \tReading / writing (record keeping). \tBasic mathematical ability (operate scale, read formulas, count, etc.). \tAbility to communicate using spoken words. Ability to communicate in English with co-workers in a respectful manner. \tExperience with scales and handheld scanners. \tUnderstand the difference between Gram, Ounce, and Pounds. \tAbility to use a calculator for simple addition and multiplication. \tTeam-work oriented; self-starter; dependable; responsible; attention to detail. \tUse of Electric jacks and Manual jacks. \tAbility to work in an alert and safe manner. \tAbility to work overtime as needed. \tHigh school diploma or equivalent. \tExperience preferred in a food manufacturing production environment. PHYSICAL DEMANDS \tMust be able to physically perform the functions of stooping, kneeling, crouching, reaching, standing, and walking for long periods of time, pushing, pulling, lifting, grasping, feeling, talking, hearing, and repetitive motions. \tMust be able to see in color. \tMust be able to lift and carry up to 50 pounds. Disclaimer: Employee must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodation will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. Dr. Praeger's Sensible Foods is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, creed, color, religion, alienage or national origin, ancestry, citizenship status, age, disability or handicap, sex, marital status, veteran status, sexual orientation, genetic information, arrest record, or any other characteristic protected by applicable federal, state or local laws. Our management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities and general treatment during employment. $17.00 - $17.00 Hourly

Job DescriptionBenefits: • Free uniforms, • Paid time off Experience working on: Warner & Swasey 1AB / 1AC Chucking machines Multi-spindle automatic screw machine (Greenlee) Turret / engine lathe Knowledge of working with metal (Drilling, NPT threading, taps / die-heads) Reading, writing, speaking English a must. Basic math skills required. (decimals and fractions) Will train mechanically inclined motivated individual.

Job DescriptionCompany Description Headquartered in Cordova, TN, Stratas Foods is a 50/50 joint venture formed in October 2008 between ACH Food Companies and Archer Daniels Midland Company. Stratas Foods is built on the combined strengths and expertise of these two great parent companies, laid down over the course of over 200 years of combined experience. Stratas will continue to build on this foundation of excellence by providing value added, branded and custom formulated fats and oils solutions to the Food Service, Food Ingredient and Retail sectors. At Stratas Foods we are committed to being the most valued supplier of fats, oils, dressings, mayonnaise and salad dressings to the private label retail bottled oils market in the United States. Manufacturing facilities are located in Dallas and Houston, TX; Decatur and Quincy, IL; Englewood, NJ; Hillside, NJ; Fresno, CA; Nashville, TN; and Valdosta, GA. Corporate offices are located in Memphis, TN. We are committed to maintaining a progressive workplace by utilizing the ideas, skills and talents of all of our employees. We strive to make Stratas Foods a great place to work and are building a team capable of meeting our business goals. Job Description The Operator II is responsible for operating machines such as filling equipment, cappers, labelers, sealers, and other related equipment, to meet customer order driven production schedules. The Operator II may also be assigned to work in the pre-weigh room to ensure the accurate and timely weighing, preparation, and staging of ingredients for production. These assignments are performed independently and not concurrently. This role requires a higher level of technical skill and problem-solving, including the ability to manually operate pre-weigh equipment and apply basic math skills to accurately weigh spices and raw ingredients in accordance with batch specifications. General Responsibilities · Follow all safety, environmental, and workplace rules and regulations. · Adhere to Good Manufacturing Practices (GMP), HACCP, food safety, and quality requirements. · Properly wear required personal protective equipment (PPE). · Accurately complete all required production, quality, downtime, and traceability documentation. · Identify and report safety hazards, quality concerns, or process deviations to the Production Supervisor. · Work collaboratively across Production, Quality, Sanitation, and Warehouse teams to meet daily production goals. · Assist other production areas as needed to support business requirements. When assigned to production line operations, the Operator II will: 1. Operate filling equipment, cappers, labelers, sealers, and related production machinery., 2. Determine and perform machine adjustments based on product specifications and material requirements., 3. Set stops, guides, and machine parameters according to specifications., 4. Monitor machine operations to detect product defects or equipment malfunctions., 5. Actively identify mechanical issues that may lead to downtime and report them promptly., 6. Stop, reset, and clear equipment jams; report impairments to the Production Supervisor., 7. Record downtime reasons accurately in the CDC system., 8. Supports production line operations during Leader absences by maintaining equipment operation, monitoring quality, and promptly escalating issues as needed. When assigned to pre-weigh room operations, the Operator II will: 1. Accurately weigh and prepare spices and raw ingredients according to batch sheets, formulas, and production schedules., 2. Ensure ingredients are properly labeled, sealed, stored, and staged to prevent cross-contamination., 3. Record lot numbers, weights, and required traceability information accurately and timely., 4. Operate scales, blenders, dispensing equipment, and related tools safely and accurately., 5. Perform basic quality checks of raw materials (visual inspection, odor, and condition)., 6. Maintain cleanliness and organization of the Pre-Weigh Room in accordance with GMP and sanitation requirements., 7. Assist with allergen clean-outs when switching between products or formulas., 8. Coordinate with Mixers and Operators to ensure timely delivery of pre-weighed ingredients., 9. Assist with inventory counts and notify supervision of shortages or discrepancies., 10. Assist with receiving and storing raw materials and help verify deliveries against specifications., 11. Identify and report out-of-specification materials, documentation errors, or safety hazards., 12. Work collaboratively across departments to meet daily production goals. * High School Diploma or GED * Ability to perform basic math necessary for accurate weighing, measuring, and documentation in a food manufacturing environment. * Experience operating in a fast paced, ready to eat food facility a plus * Ability to be self-guided and motivated to operate independently * Strong multi-tasking skills * Ability to work well under pressure * Bi-Lingual (English/Spanish) preferred * 2-3 years of experience in a similar role and industry Additional Information Additional Information: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the minimum knowledge, skill, and/or ability required. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. This position requires the ability to lift up to 50 pounds, climb stairs, bend, kneel, stand for extended periods, work in confined spaces, and work at heights Working Conditions: The job is performed in a manufacturing plant environment. Exposure to loud noises, dust, dirt, heat, sparks, oil, and smoke will occur. Personal protective equipment (safety glasses, steel-toed shoes, appropriate clothing) is required in manufacturing plants. Sensory: Ability to hear, see, speak, smell and touch well is necessary to perform basic essential task. Pay Range: $18.79 Benefits: Medical, Dental, Vision Stratas Foods is an equal opportunity employer and will not discriminate against any applicant or employee in any manner prohibited by law, including but not limited to, on the basis of race or color, religion, gender, age, genetic information, national origin/ancestry, mental or physical disability, family status/marital status, military/veteran status, and any other legally protected status. Pay Transparency Nondiscrimination Provision-The Employer will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the Employer’s legal duty to furnish information. 41 CFR 60-1.35(c) Stratas Foods Applicant Request for Accommodation Form: Stratas Foods California Privacy Rights Act Policy:

Our client is looking for a full time Sr. Structural Engineer in the NYC area and expertise in bridge rehabilitation analysis and design to lead critical projects in New York. NYSDOT experience is preferred. Ideal opportunity for a seasoned bridge design engineer capable of preparing Bridge Rehabilitation Justification Reports (BRJR) and related Design Documents and developing Preliminary and Final Design plans, leading rehabilitation design efforts from concept through completion. • Lead structural design and analysis and develop rehabilitation strategies, including deck replacement, structure steel retrofit, and substructure repairs of highway bridges and transportation structures., • Prepare and oversee development of BRJR and design approval documents,, • preliminary and final design plans, specifications and cost estimates., • Evaluate structural deficiencies and develop rehabilitation vs. replacement, • strategies., • Perform and supervise load rating analysis and bridge design using AASHTOWare Bridge Rating (BrR) and AASHTOWare Bridge Design (BrD) software., • Develop structural calculations, reports, cost comparisons, and life-cycle assessments., • Ensure compliance with NYSDOT Bridge Manual, AASHTO LRFD, and applicable federal/state standards., • Coordinate with clients including NYSDOT Structures Division and regional staff during design and review processes. Required Qualifications • Bachelor’s degree in Civil Engineering (Master’s preferred)., • Active Professional Engineer (PE) license (NY preferred or ability to obtain)., • 10–15+ years of experience in bridge design and structural engineering., • Demonstrated experience preparing or leading NYSDOT BRJR, design, • documents, preliminary and final design plans, specifications and cost estimates., • Strong experience in bridge rehabilitation, substructure and superstructure, • design. Proficiency in: • AASHTOWare BrR / BrD software, • MDX, • CSI, SAP or equivalent structural analysis software, • AutoCAD and/or MicroStation (MicroStation preferred), • Strong understanding of bridge inspection data, condition ratings, and deterioration mechanisms., • Proven ability to lead projects and guide technical staff.