Steel jobs in Richardson, TexasCreate job alerts

Job Description COMPANY OVERVIEW SICE’s main asset is its team. The high professional level of our employees ensures the quality in our services. With almost 2,500 employees worldwide, SICE promotes human development providing opportunities for the development and improvement through training and participation in multidisciplinary and multicultural groups. Talent, initiative, commitment and enthusiasm, are common characteristics of the people who build our team. JOB SUMMARY The Master Electrician is responsible for overseeing, installing, maintaining, and troubleshooting electrical systems supporting Intelligent Transportation Systems (ITS) infrastructure. This role ensures compliance with applicable electrical codes and transportation specifications while leading field crews in the deployment and maintenance of ITS devices such as traffic signals, CCTV, Dynamic Message Signs (DMS), roadway lighting, and communication systems. The Master Electrician serves as the technical authority for electrical work and ensures safe, efficient, and compliant execution of all field activities. ESSENTIAL DUTIES AND RESPONSIBILITIES Electrical Licensing & Regulatory Compliance • Serve as the Responsible Master Electrician and Electrical Qualifier for SICE in the State of Texas, maintaining all licenses and registrations required for the company to legally perform electrical work., • Ensure compliance with all applicable Texas Department of Licensing and Regulation (TDLR) requirements and electrical contractor licensing regulations., • Maintain active Master Electrician credentials and support company registration, renewals, audits, and regulatory inspections., • Evaluate licensing requirements and, when needed, obtain additional electrical licenses or certifications to support company operations in other states., • Serve as the primary company representative for electrical licensing matters with regulatory authorities and clients. Leadership & Supervision • Provide overall technical oversight and supervision of electrical activities performed by company employees, subcontractors, and field crews., • Supervise lower tier electricians, technicians, and subcontractors performing electrical field work., • Lead installation, maintenance, and repair of ITS electrical systems including but not limited to: Traffic signals and controllers, CCTV systems, Dynamic Message Signs (DMS), Roadway lighting and high mast systems, Power service installations and backup power systems, • Oversee grounding, bonding, surge protection, and power distribution systems., • Provide training and technical guidance on electrical systems., • Review and approve electrical installation methods, work practices, and field execution plans., • Support workforce planning and scheduling of crews across projects., • Diagnose and resolve electrical and system failures in ITS field devices., • Conduct inspections and preventive maintenance on infrastructure and equipment., • Ensure all electrical work complies with the National Electrical Code (NEC) and state DOT standards. SAFETY EXPECTATIONS • Serve as technical authority for electrical work. Authorized to stop work immediately if a Hazard detected., • Strict adherence to: NFPA 70 (NEC) |NFPA 70E (Electrical Safety in the Workplace) | OSHA electrical safety standards, • Use of appropriate arc-rated PPE, including: Flame-resistant (FR) clothing, Voltage-rated gloves, Face shields and arc flash protection, • Perform lockout/tagout (LOTO) procedures before servicing equipment, • Verify absence of voltage using approved testing methods, • Maintain minimum approach distances for energized equipment, • Conduct job hazard analyses (JHA) and participate in daily safety briefings, • Promote a company-wide electrical safety culture through training, mentoring, and compliance monitoring., • Verify that all electrical personnel maintain required training, certifications, and qualifications for assigned work. WORKING CONDITIONS AND PHYSICAL EFFORTS • Electrical Exposure: This position is classified as high-risk for electrical exposure, requiring advanced knowledge, licensing, and strict adherence to safety procedures to prevent serious injury or fatality., • Outdoor Exposure: Work primarily outdoors, subject to varying weather conditions, including heat, rain, and humidity., • Noise Levels: Frequent exposure to high noise levels from traffic and construction equipment., • Work Sites: Environments may include roadways, construction zones, and areas with heavy vehicle traffic., • Travel: Occasional travel to different job sites within the region; may require overnight stays., • Lifting: Ability to lift and carry up to 50 pounds regularly; occasionally up to 75 pounds with assistance., • Mobility: Frequent walking, standing, bending, kneeling, and crouching; ability to work in confined spaces and at heights., • Climbing: Use of ladders and aerial lifts to access elevated work areas., • Dexterity: Proficient use of hand tools and power equipment; ability to perform tasks requiring fine motor skills., • Vision & Hearing: Adequate vision for reading schematics and performing detailed work; good hearing for communication in noisy environments., • Personal Protective Equipment (PPE): Mandatory use of hard hats, high-visibility vests, safety glasses, gloves, hearing protection, and steel-toed boots., • Safety Protocols: Adherence to OSHA standards, including Lockout/Tagout (LOTO) procedures and NFPA 70E Arc Flash safety guidelines., • Training: Participation in regular safety meetings and completion of required safety certifications (e.g., OSHA 10-Hour)., • Emergency Response: Ability to respond promptly to emergency situations, including after-hours calls. SKILLS AND EXPERIENCE • Valid Texas Master Electrician License in good standing, with the ability to serve as SICE's Responsible Master Electrician and Electrical Qualifying Individual, • 7+ years of electrical experience (preferably in infrastructure, transportation, or heavy civil projects), • 5+ years in a supervisory or lead role, • Strong knowledge of: NEC codes and electrical standards, Power distribution and control systems, ITS/traffic systems or similar field infrastructure, • Texas electrical licensing requirements and regulatory compliance, • Ability to read and interpret electrical drawings and plans, • OSHA 10/30, • IMSA Traffic Signal Technician (Level II or higher) preferred, • Fiber Optic Certification (FOA or equivalent) preferred CONDITIONS OF EMPLOYMENT • Valid Electrical License required., • Must pass a pre-employment criminal background check., • Must pass a pre-employment Drug and Alcohol Test, • Must demonstrate eligibility to work in U.S., • Possession of a valid driver's license is a requirement for this job, CDL Preferred. WHY JOIN US? WE HAVE MANY BENEFITS: • Up to two weeks of paid time off every calendar year (10 days total). Eligibility to earn +1 day every calendar year after employee’s 3-year anniversary., • Several paid company holidays, • Individual Health Coverage for the employee and for other coverage levels, including spouse, children and family, • Dental coverage plan, • Vision coverage plan, • Critical Illness coverage plan, • Accidental Injury coverage plan, • Hospital Care Indemnity coverage plan, • Short Term Disability Insurance (SICE Inc. currently offers 100% premium contribution), • Life and AD&D Insurance (SICE Inc. currently offers 100% premium contribution), • Eligibility to participate in SICE’s 401K Plan, with 50% employer match, • Training and Growth opportunities READY TO JOIN THE TEAM? You may upload your resume on your online application in the following formats to the link provided at the very top of the page. As well as remit via email to HR-USA@sice.com • Word, • PDF No phone calls, please. SICE, Inc. is an Equal Opportunity Employer, Drug-Free Work Place

Contracting CDL-A Owner Operators • RUN YOUR BUSINESS. KEEP MORE OF IT. - Earn 75% of linehaul + 100% FSC*, • REAL FREIGHT. REAL FREEDOM. - No forced dispatch, book the loads you want, • STRONG WEEKS. SOLID HOME TIME. - Home weekly in most areas Why Drive for Tennessee Steel Haulers? Tennessee Steel Haulers is built by owner operators, for owner operators. We are a 100% owner-operator company that believes drivers should have control over their freight, their schedule, and their earnings. Here, you're not answering to forced dispatch or chasing empty promises. You're booking quality customer freight, getting paid fast, and backed by a support team that understands what it takes to run a successful flatbed operation. Owner Operator Job Overview • High earning potential, paid the right way. Top owner operators net up to $3,000 per week, with average gross earnings ranging from $5,000-$7,000 per week, depending on freight and lanes.*, • Strong percentage pay that adds up. Earn 75% of linehaul, plus 100% fuel surcharge, tarping pay, stop pay, and detention pay - so every part of the job is compensated.*, • Freedom to book the freight that works for you. No forced dispatch. Choose from a variety of flatbed freight lanes and run the loads that make the most sense for your operation., • Home time that stays reasonable. Enjoy weekly home time in most areas, giving you the balance to keep earning without staying out endlessly. Bonuses, Support & Perks • Limited-time sign-on bonus. Owner Operators can earn a $5,000 sign-on bonus for a limited time - talk to a recruiter for details.*, • Fast pay and financial flexibility. Same-day settlements on delivered loads, plus fuel discounts, EFS fuel cards, and in-cab scanning to keep cash flowing smoothly., • Operator-focused support. Work with a dedicated driver support specialist, earn $2,000 referral bonuses, and qualify for clean inspection and driver-of-the-month incentives.*, • Affordable operating costs. Take advantage of a weekly deduction program covering trucks, trailers, tags, insurance, and equipment - designed to keep your expenses predictable. All pay and bonus amounts may vary by job type, location, experience level, and performance and are subject to change based on company discretion. Talk with a recruiter to confirm specific details. There is no deadline to apply. Applications are accepted on an ongoing basis. Driver Requirements • Valid CDL A license, • 1 year or more OTR driving experience within past 3 years, • 6+ months flatbed driving experience preferred, • Drivers in the SAP program within the last 5 years are not eligible Job Type: Full-time Work Location: On the road

System Transport is Now Hiring CDL-A Flatbed Truck DriversEarn $46,984.82 - $114,350.60 per Year*Now Hiring For:\n\n • Experienced flatbed CDL-A drivers\n, • Regional & OTR routes available\n, • Home time varies by division\n, • $1,800 transition package including $1,000 orientation pay\n, • Late-model equipment with modern safety technology\n, • Full benefits + 401(k) match + PTO\nDriver Benefits: \n GREAT PAY PACKAGE \n\n • Earn $0.48 to $0.79 per mile*\n, • Earn $903.55 - $2,199.05 per week*\n, • Full pay package also includes other accessorial compensation to include tarp pay, stop pay, detention pay, border crossing pay, safety bonuses, and over-dimensional pay as appropriate\n\n PAID ORIENTATION \n\n • We host you in our office in Spokane, Washington. Airfare, single-occupancy room, breakfast, and lunch are all on us! Dinner is your time to explore what Spokane has to offer.\n, • Arrive Monday, and get your truck by Saturday. It’s that easy!\n\n EXCELLENT BENEFITS \n\n • Benefits are available to enroll in after the eligibility waiting period has been met\n, • Health insurance\n, • Dental insurance\n, • Vision insurance\n, • Health savings account\n, • 401(k)\n, • 401(k) matching\n, • Life insurance\n, • Employee assistance program\n, • $1,800 transition package\n, • Accrue 1 hour of sick time per 30 hours worked, then 1-9 years get 80 hours PTO, 10+ years get 120 hours PTO\n, • And much more!\n\n PET POLICY + GUEST RIDER POLICY \n\n • System Transport does not allow pets\n, • System Transport allows riders aged 7 and up after 90 days of safe driving\n\n Looking for an exciting driving opportunity in the western region of America? System Transport is hiring experienced CDL-A flatbed truck drivers for all routes! We offer regional, local, dedicated, and OTR routes. As a driver, you will transport important goods and materials such as glass, steel, aluminum, building materials, machinery, coils, and specialty metals. We offer competitive pay packages and excellent benefits. Join our team and become America Proud, Flatbed Strong with System Transport. Don't wait, apply now! How to Qualify:\n\n • REQUIRED: Must have a valid Class A driver’s license (CDL-A)\n, • REQUIRED: Minimum of 4+ months of driving experience required\n, • REQUIRED: A safe driving record on the road\n, • REQUIRED: Must be 21 years of age or older\n, • REQUIRED: No more than 6 jobs in the last 3 years\n, • Prefer 1-year truck driving experience, but not necessary\n, • REQUIRED: Background check required\n, • REQUIRED: A clean drug test required\n, • REQUIRED: Clean clearinghouse results required\n, • REQUIRED: For all flatbed driver opportunities, the driver must be physically able to lift a 90-pound tarp onto a 5-foot high platform twice. System Transport will test this during orientation, and flatbed drivers tarp about 70% of our loads. (this is required)\n\n (*Pay details vary by division and location, apply now for more information about our pay package) APPLICATION DEADLINE: 10/31/2026Apply now to speak with a System Transport Recruiter, and let us help you find the flatbed route that fits you best!America Proud, Flatbed Strong. Come Drive with System Transport!\n System Transport is an Equal Opportunity Employer. We are committed to fair pay and equal opportunity for all employees.

Job Description Material Handler Location: Garland, TX (Onsite) Pay Rate: $19.00/hour Shifts Available: • 1st Shift: Monday–Friday | 6:30 AM – 3:00 PM, • 2nd Shift: Monday–Friday | 2:30 PM – 11:00 PM Employment Type: Contract-to-Hire Wheeler Staffing Partners is seeking dependable and safety-focused Material Handlers for a contract-to-hire opportunity with one of our valued clients in Garland, TX. This is an excellent opportunity to join a growing manufacturing environment where you'll play an essential role in warehouse operations, inventory management, and material movement. The ideal candidate is organized, detail-oriented, and comfortable working in a fast-paced warehouse environment while maintaining a strong commitment to safety and quality. Required PPE Candidates must report on their first day wearing approved safety boots, including: • Steel Toe or Composite Toe, • Must cover the ankle, • Leather style (minimum leather upper) Candidates who do not arrive with the required footwear may not be permitted to begin work. Position Summary The Material Handler is responsible for receiving, storing, moving, and shipping materials throughout the warehouse while maintaining accurate inventory records and supporting production operations. This position requires safely operating warehouse equipment, organizing inventory, and ensuring materials are available to meet customer and production needs. Essential Responsibilities • Receive and unload incoming freight manually or using warehouse equipment such as forklifts and pallet jacks., • Inspect incoming shipments for damage, accuracy, and quality., • Verify received materials against purchase orders and packing slips., • Load and unload trucks safely and efficiently., • Pull and stage materials to fulfill production and customer orders., • Wrap, package, and prepare outbound shipments., • Organize warehouse inventory for maximum efficiency., • Stock shelves and rotate inventory as needed., • Deliver and retrieve materials from warehouse and production areas., • Tag, label, and issue materials appropriately., • Maintain accurate inventory records through data entry and inventory transactions., • Monitor inventory levels and communicate replenishment needs., • Participate in cycle counts and physical inventories., • Maintain clean, organized, and safe warehouse, loading, and storage areas., • Open containers, sort, identify, and catalog incoming materials., • Safely handle materials, including hazardous materials when required., • Operate computers to access, enter, and update inventory information., • Answer phones and provide inventory or material availability information when needed., • Assist with damage claims documentation and inventory discrepancies., • Coordinate disposal of surplus materials and maintain inventory records., • Build positive working relationships with internal departments and customers., • Follow all company safety policies and OSHA regulations., • Perform additional duties as assigned. Qualifications • High school diploma or GED required., • Valid driver's license with a safe driving record., • Strong organizational and time management skills., • Ability to prioritize multiple tasks in a fast-paced environment., • Strong attention to detail and accuracy., • Basic computer and data entry skills., • Ability to read and interpret work instructions, shipping documents, and inventory records., • Knowledge of inventory control practices., • Process improvement mindset., • Strong communication and customer service skills., • Ability to occasionally work overtime as business needs require., • Ability to communicate effectively in English to understand safety instructions, work assignments, and job-related communications. Preferred Qualifications • Previous warehouse, stockroom, or inventory experience., • Experience operating a forklift and/or electric pallet jack., • Experience working in a manufacturing environment., • Experience with inventory management systems. Physical Requirements • Ability to remain standing and walking for extended periods throughout the shift., • Must be able to remain in a stationary position approximately 50% of the workday., • Frequently lift, carry, push, and pull materials weighing up to 50 pounds., • Ability to bend, stoop, kneel, reach, twist, and climb as needed., • Ability to safely operate warehouse equipment., • Must wear required PPE, including approved safety footwear, gloves, eye protection, and other safety equipment as required.\nCompany Description WSP specializes in filling contract, contract-to-hire, direct hire, contingency, and executive positions with professional candidates. From our Executive Retained Search Teams, Direct Hire and Contract Staffing Professionals, and RPO Service offerings we create models to deliver a world-class service, with a sense of urgency and professionalism. Our connections — and our candidates — combined with a staff backed by over 20 years of experience, ensure that our clients are seeing the right candidates for their career openings. WSP is committed to creating a diverse environment and is proud to be an equal opportunity employer. FOLLOW US ON SOCIAL MEDIA TO GET UPDATES ON UPCOMING JOBS! Linkedin: Wheeler Staffing Partners Facebook: Wheeler Staffing Partner Instagram: @wheelerstaffingpartners20 WSP specializes in filling contract, contract-to-hire, direct hire, contingency, and executive positions with professional candidates. From our Executive Retained Search Teams, Direct Hire and Contract Staffing Professionals, and RPO Service offerings we create models to deliver a world-class service, with a sense of urgency and professionalism. Our connections — and our candidates — combined with a staff backed by over 20 years of experience, ensure that our clients are seeing the right candidates for their career openings.\r\n\r\nWSP is committed to creating a diverse environment and is proud to be an equal opportunity employer.\r\n\r\nFOLLOW US ON SOCIAL MEDIA TO GET UPDATES ON UPCOMING JOBS!\r\n\r\nLinkedin: Wheeler Staffing Partners\r\nFacebook: Wheeler Staffing Partner\r\nInstagram: @wheelerstaffingpartners20

Job Description Our client in Addison, TX is seeking a reliable and detail-oriented Warehouse Associate to join our growing team. This is an excellent opportunity for candidates with experience in electrical assembly, manufacturing, production, warehouse operations, quality inspection, or inventory control who are looking to grow with a dynamic team. The ideal candidate will be organized, safety-conscious, and capable of managing multiple tasks while maintaining accuracy and efficiency. Requirements: • Steel-toed boots are required., • Ability to stand, walk, bend, and lift throughout the workday., • Electrical or mechanical assembly experience preferred., • Ability to multitask in a fast-paced work environment., • Inventory maintenance or inventory control experience is preferred., • Dependable with a strong work ethic and positive attitude. Benefits:, • 401(k) with company matching, • Medical insurance, • Dental insurance, • Vision insurance, • Life insurance, • Disability insurance, • Flexible Spending Account (FSA), • Paid Time Off (PTO), • Referral program, • Retirement plan Hours: Monday – Friday, 8:00 am – 4:30 pm, 30-minute lunch break Compensation: $17-20/hr. For immediate consideration, apply now! GH864353109 #ZR

Job Description Richardson, TX $19/hour Start Date: Friday October 23rd ⏰ Full-Time | Shift: 8 AM to 5:00 PM 1 Month Immediate Openings – Apply Today! We are hiring Warehouse Workers to support operations at a warehouse, distribution, manufacturing, or logistics facility in Richardson, TX. This is a great opportunity for reliable individuals who are comfortable performing physical work, following instructions, and working as part of a team. What You'll Do • Load, unload, move, and organize materials or products, • Unpack, pack, sort, label, or prepare products as needed, • Perform general labor and warehouse duties, • Stand and walk for extended periods, • Lift and move materials safely, • Follow supervisor instructions and established procedures, • Maintain a clean and organized work area, • Follow all safety rules and procedures, • Perform other general duties as assigned What We're Looking For • Reliable and responsible workers, • Ability to follow instructions and safety procedures, • Comfortable performing physical and repetitive work, • Ability to stand and walk for extended periods, • Ability to lift and move 50 safely, • Comfortable working in a fast-paced environment, • Good attendance and punctuality, • Willingness to complete required training and/or background check, if applicable Previous warehouse, manufacturing, production, logistics, construction, or general labor experience is a plus, but not required if applicable. Schedule Shift: 8 AM - 5 PM Days: M-F Break: 1 hour unpaid Jobsite Requirements Workers may be required to wear or provide: • Steel-toe shoes, • High-visibility vest, • Hard hat Physical Requirements This position may require: • Standing and walking for extended periods, • Repeated bending, reaching, or crouching, • Lifting and moving materials, • Performing repetitive physical tasks throughout the shift Apply Today We are hiring immediately for this position. \nCompany Description SIGOOK® is a Recruiting firm offering equal labor opportunities in compliance with all applicable laws in the USA for personnel recruitment and selection. We sincerely thank all candidates who apply; however, only those selected for an interview will be contacted. Disclaimer: Applying for this position does not constitute a job offer or guarantee employment. All applicants must complete the selection process, and hiring is subject to position availability and the client's final decision. SIGOOK® is a Recruiting firm offering equal labor opportunities in compliance with all applicable laws in the USA for personnel recruitment and selection. We sincerely thank all candidates who apply; however, only those selected for an interview will be contacted.\r\n\r\nDisclaimer: Applying for this position does not constitute a job offer or guarantee employment. All applicants must complete the selection process, and hiring is subject to position availability and the client's final decision.

Job Description Wiring Assembly Technician Location: Garland, TX (Onsite) Pay Rate: $20.00/hour Shifts Available: • 1st Shift: Monday–Friday | 6:30 AM – 3:00 PM, • 2nd Shift: Monday–Friday | 2:30 PM – 11:00 PM Employment Type: Contract-to-Hire Wheeler Staffing Partners is seeking skilled and detail-oriented Wiring Assembly Technicians for a contract-to-hire opportunity with one of our valued clients in Garland, TX. This is an excellent opportunity for individuals with electrical assembly experience who enjoy building high-quality electrical control systems in a manufacturing environment. The Wiring Assembly Technician is responsible for wiring, assembling, fitting, and mounting electrical components, subassemblies, and control equipment while ensuring all work meets quality, safety, and production standards. Required PPE Candidates must report on their first day wearing approved safety boots, including: • Steel Toe or Composite Toe, • Must cover the ankle, • Leather style (minimum leather upper) Candidates who do not arrive with the required footwear may not be permitted to begin work. Position Summary The Wiring Assembly Technician is responsible for wiring and assembling electrical control equipment, including switchgear, switchboards, automatic transfer switches (ATS), and control panels. This position requires the ability to interpret electrical drawings, assemble components accurately, and maintain the highest standards of workmanship, quality, and safety. Essential Responsibilities • Wire and assemble electrical control panels, switchgear, switchboards, and Automatic Transfer Switches (ATS)., • Read and interpret electrical schematics, wiring diagrams, blueprints, and manufacturing drawings., • Wire and install Programmable Logic Controllers (PLCs) and other electrical components., • Assemble electrical switchboard equipment according to engineering specifications., • Perform assembly work from written instructions, engineering drawings, and verbal direction., • Inspect completed assemblies to ensure compliance with quality standards, engineering specifications, and applicable electrical codes., • Test completed assemblies and identify any wiring or assembly issues., • Maintain production schedules by completing assignments accurately and efficiently., • Communicate material shortages, production delays, quality concerns, or other issues to supervisors., • Maintain a clean, organized, and safe work environment., • Follow all company safety policies and manufacturing procedures., • Work collaboratively with team members to meet production goals and customer deadlines., • Demonstrate flexibility by working overtime when required to support production demands., • Perform additional duties as assigned. Qualifications • High school diploma or GED preferred., • Previous experience with electrical assembly, wiring, or manufacturing preferred., • Ability to read and interpret electrical schematics, wiring diagrams, blueprints, and manufacturing drawings., • Experience assembling electrical control panels, switchgear, switchboards, or similar industrial electrical equipment is highly preferred., • Familiarity with Programmable Logic Controllers (PLCs) is a plus., • Strong attention to detail and commitment to producing quality work., • Ability to work independently and as part of a team., • Strong problem-solving and organizational skills., • Ability to communicate effectively in English to understand safety instructions, work assignments, and job-related communications., • Willingness to work overtime as business needs require. Preferred Qualifications • Experience in electrical manufacturing or industrial assembly., • Knowledge of electrical control systems and power distribution equipment., • Experience using electrical hand tools, power tools, and testing equipment., • Understanding of electrical safety standards and manufacturing best practices. Physical Requirements • Ability to stand, walk, bend, reach, and perform repetitive assembly tasks throughout the workday., • Ability to lift and carry up to 45 pounds., • Excellent manual dexterity for wiring, terminating, and assembling electrical components., • Strong hand-eye coordination and attention to detail., • Ability to distinguish between colored wires, labels, and electrical components., • Ability to safely use hand tools, power tools, and testing equipment., • Must wear required PPE, including approved safety footwear, gloves, safety glasses, hearing protection, and other protective equipment as required.\nCompany Description WSP specializes in filling contract, contract-to-hire, direct hire, contingency, and executive positions with professional candidates. From our Executive Retained Search Teams, Direct Hire and Contract Staffing Professionals, and RPO Service offerings we create models to deliver a world-class service, with a sense of urgency and professionalism. Our connections — and our candidates — combined with a staff backed by over 20 years of experience, ensure that our clients are seeing the right candidates for their career openings. WSP is committed to creating a diverse environment and is proud to be an equal opportunity employer. FOLLOW US ON SOCIAL MEDIA TO GET UPDATES ON UPCOMING JOBS! Linkedin: Wheeler Staffing Partners Facebook: Wheeler Staffing Partner Instagram: @wheelerstaffingpartners20 WSP specializes in filling contract, contract-to-hire, direct hire, contingency, and executive positions with professional candidates. From our Executive Retained Search Teams, Direct Hire and Contract Staffing Professionals, and RPO Service offerings we create models to deliver a world-class service, with a sense of urgency and professionalism. Our connections — and our candidates — combined with a staff backed by over 20 years of experience, ensure that our clients are seeing the right candidates for their career openings.\r\n\r\nWSP is committed to creating a diverse environment and is proud to be an equal opportunity employer.\r\n\r\nFOLLOW US ON SOCIAL MEDIA TO GET UPDATES ON UPCOMING JOBS!\r\n\r\nLinkedin: Wheeler Staffing Partners\r\nFacebook: Wheeler Staffing Partner\r\nInstagram: @wheelerstaffingpartners20

Job Description Garland Stainless Steel Manufacturing Company seeking a Qualified and Experienced Equipment Electrician Employment type: 2nd Shift-Full-Time (4) 10-hour days Monday-Thursday 3:15pm-1:45am Job duties include: Wire, rebuilding and repair of electrical food service equipment and controls. Apply knowledge of equipment wiring, determine equipment malfunctions, and test units to required specifications. Must be Able to: Work from wiring diagrams, drawings, specifications, and instructions, for work to be done on equipment. Plan and perform work using knowledge of electrical theory and principles, wiring specifications, and local and national electrical codes. Install cables and wiring, and perform splicing as required. Fabricate parts when required using machine and hand tools common to the trade. JOB QUALIFICATIONS: 1. Experience as an equipment and plant electrician., 2. Extensive knowledge of wiring, circuits for equipment. Bilingual Candidates (English/Spanish) is a PLUS, but not Mandatory. Candidate must be a Self-Starter, Motivated, and Dependable Compensation: $20-$22 Hourly Depending on Experience Competitive wages, 401K, health insurance, Paid Vacation and Holidays, Bonus Programs and many other Perks. Weekends and OT as needed Please submit resume or reply detailing experience and providing salary history and contact information. Company DescriptionAFB Manufacturing is a growing 75+ year old family-owned company. AFB Manufacturing is an industry leader in our niche market, serving multi-billion dollar companies all over the world. Our specialty protects us from imports, so our team members have no job insecurity relating to offshore competition. We expanded our Garland, Texas manufacturing facility and capacity multiple times in the past 10+ years and the only thing we need are people who care about the quality of their work and want to learn and develop new skills as needs arise.AFB Manufacturing is a growing 75+ year old family-owned company. AFB Manufacturing is an industry leader in our niche market, serving multi-billion dollar companies all over the world. Our specialty protects us from imports, so our team members have no job insecurity relating to offshore competition. We expanded our Garland, Texas manufacturing facility and capacity multiple times in the past 10+ years and the only thing we need are people who care about the quality of their work and want to learn and develop new skills as needs arise.

Job Description Wheeler Staffing Partners is seeking dependable and detail-oriented Mechanical Assembly Technicians for a contract-to-hire opportunity with one of our valued clients in Garland, TX. This position is ideal for candidates who enjoy hands-on work, have mechanical aptitude, and take pride in producing quality products in a fast-paced manufacturing environment. The Mechanical Assembly Technician is responsible for assembling manufactured products according to engineering specifications, maintaining quality standards, and supporting production goals while following all safety procedures. Pay & Schedule Pay Rate: $19.00 per hour Available Shifts: • Shift A (4/10s) - 5am - 3:30pm - Monday - Thursday, • Shift B (3/12s) - 6am - 6:30pm Friday, Saturday, Sunday Location: Onsite – Garland, TX Required PPE: Candidates must report on their first day wearing approved safety boots, including: • Steel Toe or Composite Toe, • Must cover the ankle, • Leather style (minimum leather upper) Candidates who do not arrive with the required footwear may not be permitted to begin work. Position Summary The Mechanical Assembly Technician is responsible for assembling machinery, fabricated products, and mechanical or electrical components according to blueprints, schematics, and work instructions. This role requires attention to detail, mechanical aptitude, and a commitment to producing high-quality products while maintaining a safe and organized work environment. Essential Responsibilities • Assemble machinery, fabricated metal products, electrical equipment, and related products according to engineering drawings and specifications., • Read and interpret blueprints, schematics, assembly instructions, and work orders., • Use hand tools, power tools, and assembly equipment safely and effectively., • Inspect completed assemblies to ensure quality, accuracy, and compliance with specifications., • Identify and report product inconsistencies or quality concerns to supervision., • Maintain production logs, assembly records, and other required documentation., • Perform basic maintenance and minor repairs on assembly equipment and conveyors as needed., • Monitor inventory of tools, parts, and supplies and notify the Materials Handler when replenishment is required., • Support quality control by performing routine product inspections throughout the assembly process., • Maintain a clean, organized, and safe work area following all company safety procedures., • Work collaboratively with team members to meet production schedules and customer demands., • Demonstrate flexibility by working assigned overtime as business needs require., • Communicate effectively with supervisors, coworkers, and other departments to support production goals., • Perform other duties as assigned. Qualifications • High school diploma or GED required., • Ability to read and interpret blueprints, schematics, and assembly instructions., • Mechanical aptitude with strong attention to detail., • Basic computer skills, including Microsoft Office, for completing production logs and documentation., • Ability to perform basic equipment maintenance and minor repairs., • Basic math, reading, and writing skills., • Strong teamwork and communication skills., • Ability to communicate effectively in English to understand safety instructions, work assignments, and job-related communications., • Ability to work overtime as needed to meet production requirements. Preferred Qualifications • Previous mechanical or manufacturing assembly experience., • Experience using hand tools, power tools, and measuring equipment., • Experience working in a manufacturing or production environment., • Knowledge of quality control processes and lean manufacturing principles is a plus. Physical Requirements • Ability to stand for extended periods while performing repetitive assembly tasks., • Must be able to lift and carry up to 30 pounds throughout the workday., • Excellent manual dexterity to assemble products and operate hand tools., • Strong hand-eye coordination., • Ability to distinguish between colored wires, tabs, labels, and electronic components., • Ability to bend, reach, twist, and perform repetitive hand movements throughout the shift., • Must wear required PPE, including approved safety footwear, gloves, hearing protection, and other safety equipment as required.\nCompany Description WSP specializes in filling contract, contract-to-hire, direct hire, contingency, and executive positions with professional candidates. From our Executive Retained Search Teams, Direct Hire and Contract Staffing Professionals, and RPO Service offerings we create models to deliver a world-class service, with a sense of urgency and professionalism. Our connections — and our candidates — combined with a staff backed by over 20 years of experience, ensure that our clients are seeing the right candidates for their career openings. WSP is committed to creating a diverse environment and is proud to be an equal opportunity employer. FOLLOW US ON SOCIAL MEDIA TO GET UPDATES ON UPCOMING JOBS! Linkedin: Wheeler Staffing Partners Facebook: Wheeler Staffing Partner Instagram: @wheelerstaffingpartners20 WSP specializes in filling contract, contract-to-hire, direct hire, contingency, and executive positions with professional candidates. From our Executive Retained Search Teams, Direct Hire and Contract Staffing Professionals, and RPO Service offerings we create models to deliver a world-class service, with a sense of urgency and professionalism. Our connections — and our candidates — combined with a staff backed by over 20 years of experience, ensure that our clients are seeing the right candidates for their career openings.\r\n\r\nWSP is committed to creating a diverse environment and is proud to be an equal opportunity employer.\r\n\r\nFOLLOW US ON SOCIAL MEDIA TO GET UPDATES ON UPCOMING JOBS!\r\n\r\nLinkedin: Wheeler Staffing Partners\r\nFacebook: Wheeler Staffing Partner\r\nInstagram: @wheelerstaffingpartners20

Job Description Industrial construction company looking for experienced pipe fitters and pipe welders. Project location is Garland Tx / Rockwall Tx and pays ZERO perdiem. This project is predominantly 304 stainless steel schedule 10 piping. Welders need to have experience welding this type of pipe, fitters should be able to work with: stainless weld pipe, screw pipe, and pro-press. A minimum of 5 years journeyman experience will be required and verified.

Job Description Job Summary We are seeking an experienced TIG Welder with proven experience using foot pedal-controlled TIG welding equipment. The ideal candidate will have experience welding stainless steel and aluminum, reading blueprints, and producing high-quality precision welds in a manufacturing or fabrication environment. • Perform TIG welding on stainless steel, aluminum, and carbon steel components, • Utilize foot pedal amperage control to produce high-quality welds, • Read and interpret blueprints, weld symbols, and work instructions, • Weld thin-gauge and precision fabricated parts Qualifications Required • Minimum 2 years of TIG welding experience, • Experience using foot pedal-controlled TIG welding machines, • Ability to weld stainless steel and aluminum, • Ability to read blueprints and welding symbols, • Ability to pass a hands-on TIG weld test Preferred • AWS Welding Certification, • Fabrication experience, • MIG welding experience, • Experience with sanitary, food-grade, or precision welds, • Experience working with thin-gauge materials What We're Looking For The ideal candidate is a hands-on TIG welder who can confidently control weld heat and penetration using a foot pedal while producing clean, precise welds on stainless steel and aluminum products. Candidates with only MIG welding experience will not be considered. \nCompany Description RPC Staffing was founded in 2002 as a firm that combines a hands-on approach with industry expertise and national reach. We are a Veteran Owned Business; HUB Certified staffing company; a proud member of the Association of the United States Army & American Staffing Association; one of Dallas Business Journal’s Top Hispanic Owned Companies; an INC. 5000 America’s Fastest-Growing Private Company; a six-time winner of Clearly Rated’s Best of Staffing award; and one of Forbes’ America’s Best Professional Recruiting Firms. RPC Staffing was founded in 2002 as a firm that combines a hands-on approach with industry expertise and national reach.\r\n\r\nWe are a Veteran Owned Business; HUB Certified staffing company; a proud member of the Association of the United States Army & American Staffing Association; one of Dallas Business Journal’s Top Hispanic Owned Companies; an INC. 5000 America’s Fastest-Growing Private Company; a six-time winner of Clearly Rated’s Best of Staffing award; and one of Forbes’ America’s Best Professional Recruiting Firms.

Job Description CNC Machinist - Cutting Tool Support We're looking for an experienced CNC machinist or tooling professional to join our Cutting Tools & Industrial Supplies team in a technical support role. This is a customer-facing technical support role—not a sales position—where your machining knowledge becomes your greatest asset. If you're ready to take your machining expertise beyond the shop floor, we'd like to meet you. What You'll Do • Help customers select the right cutting tools, drills, taps, inserts, holders, and industrial supplies, • Recommend tooling solutions based on workpiece material, machine capability, and machining application, • Troubleshoot machining challenges including tool life, chatter, chip control, surface finish, and cycle time, • Provide technical guidance on speeds, feeds, coatings, tool geometry, and machining best practices, • Prepare quotes, process customer orders, assist with will-call, and provide general tooling assistance., • Continuing to expand your knowledge through manufacturer training and product education We're Looking For Someone Who Has • 3+ years of CNC machining, tool room, manufacturing engineering, or cutting tool experience, • Knowledge of various cutting tool manufacturers, • Strong knowledge of milling, turning, drilling, and threading applications, • Experience selecting cutting tools for a variety of materials including steel, stainless steel, aluminum, cast iron, and exotic alloys, • The ability to troubleshoot machining and tooling challenges, • Excellent communication skills and a genuine desire to help customers succeed, • Strong computer skills and the ability to learn new systems Experience with Sandvik, Kennametal, Seco, Iscar, Guhring, OSG, Mitsubishi Materials, or similar cutting tool manufacturers is a plus. Why Experienced Machinists Make This Transition This position allows you to stay connected to machining while enjoying: • Monday-Friday, 8 AM – 5 PM, In-office, • Stable, year-round employment, • Climate-controlled office environment, • No mandatory overtime, • Opportunity to solve a wide variety of machining challenges, • Ongoing technical training from industry-leading manufacturers, • Collaborative team environment, • The chance to help manufacturers become more productive every day What We Offer • Competitive pay: $30-$37 per hour, depending on experience, • Annual incentive opportunities, • Medical, dental, vision, life, and disability insurance beginning on your first day, • 401(k) with Company match, • Paid vacation and personal time, • Tuition reimbursement, • Employee Assistance Program, • Opportunities for professional growth and advancement, • A financially stable company with more than 55 years of success About Productivity, Inc. Since 1968, Productivity has been a trusted partner to manufacturers across the Midwest. We provide CNC machine tools, cutting tools, industrial supplies, automation, robotics, engineering support, training, and service to help our customers improve productivity and remain competitive. If you're the machinist others turn to for tooling advice and troubleshooting, we'd love to hear from you. Apply today and bring your machining expertise to a company where technical knowledge is valued every day. IND123

Job DescriptionDescription: • Compensation will be determined based on factors including but not limited to location, skills, abilities, and experience. Company Overview: ARCXIS, headquartered in Houston, Texas, is the nation's number one engineering and inspections firm, touching 1 in every 7 new homes, and operating in over 28 states. Committed to innovation and excellence, our services help to build better quality homes, more quickly, at lower cost, and with less risk. Formerly known as DPIS Builder Services, Ei Companies, Post-Tension Solutions, Ensign Building Solutions Home Energy Division, and Building Energy, ARCXIS unites extensive expertise into a single brand, offering nationwide coverage with a local touch. Our portfolio includes ABCO Construction Services, LLC, United Structural Consultants, and iPermit, amplifying our reach into the multi-family, multi-use, commercial, and pre-existing residential sectors. ARCXIS is majority owned by Saw Mill Capital, LLC (Briarcliff Manor, New York). Visit us online at www.arcxis.com. Position Overview: The Company is looking for a full-time Structural Designer to add to the team. We are looking for an ambitious candidate that is fluent in AutoCAD and has the ability to produce structural designs and details for residential buildings under tight time constraints. This person is preferred to have previously designed buildings with steel, wood, and concrete. Additional experience working with mechanicals and HVAC considered a plus. They need to be very reliable, hardworking, and self-starter that enjoys a challenge. You would be joining an energetic team environment in our growing Houston office with potential for development and growth. General Responsibilities • Prepares structural designs and construction documents for assigned projects., • Identifies design discrepancies and communicates required revisions to the Job Captain, builder, architect, or other project stakeholders., • Ensures structural designs comply with applicable codes, company standards, and project requirements., • Performs peer reviews and quality checks of other designers' work when assigned., • Maintains effective communication with internal departments and external customers throughout the design process., • Completes assigned projects accurately and within established project schedules., • Uses QA Checklists to ensure quality plans delivered to the clients. Gravity Load Analysis • Calculates dead, live, roof, and snow loads in accordance with ASCE 7 and applicable building codes., • Determines tributary areas, load paths, and support reactions for beams, joists, columns, and foundations., • Utilizes Forte Web software to design engineered wood products, including I-joists, LVL beams, and rim boards for gravity loading conditions., • Interprets design inputs, evaluates span and bearing conditions, and verifies software results using engineering judgment and applicable code requirements. Lateral Load Analysis • Calculates wind and seismic loads in accordance with ASCE 7 and local building code requirements., • Determines shear wall loads, diaphragm forces, overturning forces, and other lateral load path components. Mentorship & Leadership: -Review the work of junior drafters/designers; provide feedback and redlines. -Be proficient with drafting standards, design methods. Design Floor Systems: -Independently produce floor framing plans and sections for low-to-mid complexity projects. -Produces accurate, code-compliant designs with minimal oversight; communicates effectively across disciplines. PTI Slab Program: -Able to run calculations. Pier Beam: -Perform load transfer analysis from superstructure to piers, ensuring soil bearing capacity is considered. Conventional Slabs: -Analyze soil-bearing capacity and determine appropriate slab thickness and reinforcement. Complex Foundation Details: -Interpret and develop complex foundation details from the EIT/Engineer involving varying soil conditions, stepped footings, and deep foundation elements. -Ensure constructability, code compliance, and accurate communication in foundation drawings and coordination documents. Requirements: • Minimum of 10 years of structural design experience or equivalent combination of education and experience., • Proficient in CAD (AutoCAD/BricsCAD/2D drawings), • Excellent communication skills with both internal and external customers., • Working knowledge of structural load calculations and applicable building codes., • Experience designing wood-framed structures, including conventional stick framing., • Strong written and verbal communication skills with both internal teams and external customers., • Excellent organizational, time management, and multitasking abilities with the capacity to manage multiple projects simultaneously while meeting deadlines., • H.S. Education or equivalent. Trade school experience or certification in CAD preferred., • Willingness to work overtime as business needs require. Work Schedule: Generally Monday – Friday day shift, however additional hours, including weekend hours, may be required in accordance with changing business needs. Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Referral program, • Vision insurance

Job DescriptionDescription: Job description: Position Summary Ona Polymers, LLC is an innovative manufacturer of water-based emulsions for the coatings, adhesives, and graphic arts industries, selling under the brand names “Dura Pro” and “Ona”. We are committed to helping our customers win in their markets by offering consistent and exceptional products that not only exceed the standards of the industries we serve but also set new standards. We are seeking a reliable, safety-focused Floor Operator to join our manufacturing team. This position is responsible for safely processing chemical products by following operating instructions, operating production equipment, transferring materials, and maintaining quality standards. The ideal candidate is dependable, detail-oriented, and comfortable working in a fast-paced manufacturing environment. Swing Shift: 6:00 AM to 6:00 PM Days/Nights According to Shift Essential Job Functions • Transfer materials between tanks, totes, and drums using pumps and hoses by following SOPs., • Monitor production processes and make adjustments as directed., • Collect product samples for Quality Control testing., • Read and record production data, including batch records, temperatures, weights, and processing times., • Inspect equipment before, during, and after production runs., • Clean hoses, pumps, and work areas between batches., • Identify and report equipment malfunctions, quality concerns, or safety hazards immediately., • Assist with preventive maintenance and minor equipment troubleshooting., • Follow all safety, environmental, housekeeping, and quality procedures., • Maintain accurate production documentation., • Support continuous improvement initiatives and assist in other production areas as needed., • Record operating data such as process conditions, test results, and instrument readings, • Confer with technical and supervisory personnel to report or resolve conditions affecting safety, efficiency, and product quality, • Draw samples of products, and conduct quality control tests in order to monitor processing, and to ensure that standards are met, • Regulate or shut down equipment during emergency situations, as directed by supervisory personnel, • Interpret chemical reactions visible through sight glasses, and review laboratory test reports for process adjustments, • Calculate material requirements or yields according to formulas., • Waste water treatment monitoring Requirements: Requirements: Preferred/required previous experience in: • Previous experience in operating chemical processing equipment, • Chemical manufacturing or industrial production experience., • Experience with pumps, valves, filters, mixers, and bulk liquid transfers., • Operating power-driven pumps, • Use of measuring tools or equipment, • Hose changes and cleaning, • Experience in water treatment a plus, • Basic mechanical troubleshooting skills., • Experience using ERP or production tracking systems. PHYSICAL REQUIREMENTS: • Wear required personal protective equipment (PPE) at all times, including safety glasses, steel-toe footwear, hearing protection, gloves, hard hat or bump cap, and any other PPE required for specific tasks., • Unrestricted ability to sit, stand, walk, reach, stoop, kneel, crawl, climb stairs, ladders and balance., • Unrestricted ability to use hands and arms., • Ability to lift, push, pull and/or move 55 pounds., • Specific vision abilities include close vision, peripheral vision, and ability to adjust focus., • Occasionally exposed to fumes, airborne particles, and a wide range of temperatures., • Regularly exposed to moving mechanical parts., • Noise level is usually loud. All applicants must successfully pass an interview, background check, and drug & alcohol screenings. ONA Polymers is an Equal Opportunity Employer. Drug and Alcohol-Free Environment.

Job Description Job Summary: We are seeking a skilled and dependable Pipefitter to join our team. The ideal candidate will have experience installing, assembling, fabricating, maintaining, and repairing piping systems used in commercial and industrial construction projects. This position requires the ability to read blueprints, work with various piping materials, and ensure all installations meet project specifications and safety standards. Key Responsibilities: • Install, assemble, and maintain piping systems for HVAC, mechanical, and plumbing applications., • Read and interpret blueprints, drawings, and specifications to determine pipe layouts and installation requirements., • Measure, cut, thread, bend, and weld pipe as needed., • Install supports, hangers, valves, fittings, and related equipment., • Perform hydrostatic and pressure testing of piping systems., • Collaborate with project managers, foremen, and other trades to ensure efficient project completion., • Troubleshoot and repair piping systems as required., • Maintain a clean and safe work environment while following all OSHA and company safety procedures., • Operate hand tools, power tools, and equipment safely and effectively., • Ensure work is completed according to project schedules and quality standards. Qualifications: • Previous experience as a Pipefitter in commercial or industrial construction., • Ability to read and interpret blueprints, schematics, and isometric drawings., • Experience working with carbon steel, stainless steel, copper, PVC, and other piping materials., • Knowledge of HVAC and mechanical piping systems preferred., • Strong math and measurement skills., • Ability to lift up to 50 pounds and work in various weather conditions., • Reliable transportation and excellent attendance., • Welding and fabrication experience is a plus.\nCompany Description RPC Staffing was founded in 2002 as a firm that combines a hands-on approach with industry expertise and national reach. We are a Veteran Owned Business; HUB Certified staffing company; a proud member of the Association of the United States Army & American Staffing Association; one of Dallas Business Journal’s Top Hispanic Owned Companies; an INC. 5000 America’s Fastest-Growing Private Company; a six-time winner of Clearly Rated’s Best of Staffing award; and one of Forbes’ America’s Best Professional Recruiting Firms. RPC Staffing was founded in 2002 as a firm that combines a hands-on approach with industry expertise and national reach.\r\n\r\nWe are a Veteran Owned Business; HUB Certified staffing company; a proud member of the Association of the United States Army & American Staffing Association; one of Dallas Business Journal’s Top Hispanic Owned Companies; an INC. 5000 America’s Fastest-Growing Private Company; a six-time winner of Clearly Rated’s Best of Staffing award; and one of Forbes’ America’s Best Professional Recruiting Firms.

Job Description Seeking an experienced Pipe Fitter to support commercial and industrial mechanical construction projects. This position is responsible for reading blueprints, laying out piping systems, fitting and assembling pipe, and assisting with the installation of mechanical piping systems. The ideal candidate can take a set of prints, perform pipe layout, fit and install piping systems with minimal supervision, and work safely and efficiently on commercial mechanical construction projects. Responsibilities • Read and interpret blueprints, isometric drawings, and piping layouts., • Measure, cut, fit, thread, groove, and assemble piping systems., • Install carbon steel, stainless steel, copper, and PVC piping as required., • Perform pipe fit-up for welding operations., • Install valves, hangers, supports, pumps, and mechanical equipment., • Verify dimensions, alignments, and elevations according to project specifications., • Assist with system testing, troubleshooting, and punch-list completion., • Maintain clean and organized work areas., • Follow all OSHA and company safety requirements., • Coordinate with welders, foremen, and project managers to complete projects on schedule. Requirements • Minimum 3 years of pipe fitting experience in commercial or industrial construction., • Ability to read and interpret blueprints and piping drawings., • Experience with pipe layout, measurements, and installation., • Knowledge of mechanical piping systems and components., • Experience installing pipe hangers, valves, fittings, and supports., • Ability to use hand tools, power tools, and measuring equipment., • Ability to work independently with minimal supervision., • Reliable transportation to job sites., • Ability to lift 50+ pounds and work in physically demanding environments. Preferred Qualifications • Experience with HVAC mechanical piping systems., • Experience fitting pipe for TIG, MIG, or Stick welding., • OSHA 10 or OSHA 30 Certification., • Scissor Lift and Boom Lift Certification., • Experience with chilled water, heating water, refrigerant, and process piping systems.\nCompany Description RPC Staffing was founded in 2002 as a firm that combines a hands-on approach with industry expertise and national reach. We are a Veteran Owned Business; HUB Certified staffing company; a proud member of the Association of the United States Army & American Staffing Association; one of Dallas Business Journal’s Top Hispanic Owned Companies; an INC. 5000 America’s Fastest-Growing Private Company; a six-time winner of Clearly Rated’s Best of Staffing award; and one of Forbes’ America’s Best Professional Recruiting Firms. RPC Staffing was founded in 2002 as a firm that combines a hands-on approach with industry expertise and national reach.\r\n\r\nWe are a Veteran Owned Business; HUB Certified staffing company; a proud member of the Association of the United States Army & American Staffing Association; one of Dallas Business Journal’s Top Hispanic Owned Companies; an INC. 5000 America’s Fastest-Growing Private Company; a six-time winner of Clearly Rated’s Best of Staffing award; and one of Forbes’ America’s Best Professional Recruiting Firms.

Job DescriptionField Commissioning Manager – Renewable Energy Location: DFW Metroplex, TX Salary: $120,000–$140,000 annually Employment Type: Full-Time Job Summary A growing energy and infrastructure company is seeking an experienced Field Commissioning Manager to oversee commissioning, testing, troubleshooting, and energization activities for renewable energy projects. This role leads field commissioning teams and coordinates with engineering, construction, SCADA, utilities, and operations to ensure systems are installed, tested, and energized safely and according to project specifications. The ideal candidate has a strong background in utility-scale renewable energy, electrical construction, or power generation, with proven experience leading commissioning activities and coordinating system startup and grid integration. Key Responsibilities Commissioning Planning & Documentation Develop and execute commissioning and energization plans for renewable energy projects. Support the preparation and implementation of Pre-Functional Testing (PFT) and Functional Performance Testing (FPT) procedures. Review construction drawings, technical specifications, and commissioning documentation to verify readiness for testing. Maintain accurate commissioning records, test reports, and project documentation. Ensure field activities align with project schedules and commissioning plans. Field Execution & Team Leadership Oversee daily field commissioning activities, including testing, troubleshooting, and system verification. Supervise commissioning technicians, subcontractors, and equipment vendors. Coordinate pre-commissioning inspections to confirm installation readiness. Lead system startup activities and support equipment energization. Identify commissioning issues and coordinate corrective actions with engineering, construction, and vendors. Verify equipment performance and integrated system operation. Utility Coordination & SCADA Integration Coordinate commissioning activities with engineering, construction, QA/QC, and operations teams. Support SCADA testing, integration, and verification to ensure proper system communication and functionality. Coordinate with utilities, transmission operators, and grid authorities for energization and testing. Support ERCOT testing requirements and grid integration procedures when applicable. Participate in commissioning meetings and communicate project progress, issues, and resolutions. Safety, Quality & Process Improvement Ensure commissioning activities follow company safety policies, quality standards, and project requirements. Establish standardized commissioning procedures and best practices. Support training and development of field personnel and commissioning teams. Identify opportunities to improve efficiency, reliability, and commissioning processes. Promote a strong safety culture and report unsafe working conditions. Project & Stakeholder Coordination Maintain effective working relationships with owners, subcontractors, vendors, engineers, utilities, and other project stakeholders. Provide regular updates on commissioning progress, schedules, and field issues. Represent the company professionally and support customer relationships. Participate in project meetings, industry events, and additional assignments as needed. Qualifications 7+ years of experience in renewable energy, power generation, industrial commissioning, or electrical construction. 3+ years of experience in a commissioning leadership or supervisory role. Experience commissioning utility-scale solar projects, battery energy storage systems (BESS), substations, or power generation facilities. Demonstrated experience leading system startup, testing, troubleshooting, and energization activities. Experience managing commissioning technicians, subcontractors, and equipment vendors. Experience coordinating with utilities, transmission operators, and grid authorities. Knowledge of electrical systems, construction drawings, technical specifications, and commissioning procedures. Familiarity with SCADA systems and grid integration requirements. Strong leadership, communication, problem-solving, and documentation skills. Ability to travel based on project and job site requirements. Availability to support emergency situations outside normal working hours, as needed. Work Environment & Physical Requirements Work in outdoor and industrial environments, including moderate to extreme weather conditions. Ability to stand, walk, reach, handle equipment, and perform routine physical activities. Occasionally lift or move items weighing up to 10 pounds. Potential exposure to hazardous substances, elevated work areas, and partially enclosed structures. Ability to work safely in moderate to high noise environments. Required PPE and Site Safety Steel-toe boots Safety glasses Hard hat High-visibility safety vest Hearing protection as required Compliance with site-specific safety procedures, including working-at-height requirements Equal Employment Opportunity We are an equal opportunity employer and consider all qualified applicants without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected status under applicable law. INDH Powered by JazzHR mDJsnCNFsu

Job Description Position Overview We are seeking an experienced Senior Structural Engineer to lead structural engineering and design efforts for complex infrastructure projects throughout Texas. This position will focus on water infrastructure, heavy civil, and transportation structures, including water treatment facilities, dams, levees, pump stations, and conveyance systems. The ideal candidate has a strong background in structural engineering consulting, project management, and technical design, with the ability to independently lead projects, manage budgets, mentor junior engineers, and collaborate with multidisciplinary teams. Key Responsibilities Lead structural engineering and design for moderate to highly complex infrastructure projects. Perform structural analysis, engineering calculations, and design of steel, concrete, masonry, wood, and other structural systems. Develop and review construction drawings, technical specifications, calculations, and engineering reports. Manage engineering projects from initial design through construction administration. Oversee project budgets, schedules, deliverables, and technical quality. Conduct site assessments, structural evaluations, and field investigations. Coordinate with civil engineers, architects, process engineers, consultants, and project managers. Perform design reviews and final quality control checks to ensure compliance with applicable codes and standards. Provide technical guidance, training, and mentorship to junior engineers and design staff. Assist with resolving construction-related issues and responding to technical inquiries. Maintain strong client relationships and participate in project meetings, interviews, and presentations. Support business development efforts and identify opportunities for additional engineering services. Incorporate sustainable design principles and industry best practices into project development. Required Qualifications Bachelor's degree in Civil, Structural, or Architectural Engineering, or equivalent. Professional Engineer (PE) license required. 7+ years of structural engineering experience, preferably within an engineering consulting environment. Strong knowledge of structural analysis, design principles, load paths, and material behavior. Experience designing structural systems using steel, reinforced concrete, masonry, and wood. Advanced ability to prepare and review structural calculations, drawings, and specifications. Experience leading engineering projects and coordinating multidisciplinary design teams. Strong understanding of applicable building codes, engineering standards, and construction practices. Ability to independently perform technical reviews and quality control checks. Experience managing project budgets, schedules, and client expectations. Strong leadership, mentoring, communication, and problem-solving skills. Proficiency with Microsoft Office, including Excel, Word, and Outlook. Ability to travel up to 20%, including occasional overnight stays. Preferred Qualifications Master's degree in Structural Engineering. 8+ years of structural engineering experience. Experience with water infrastructure, heavy civil, or transportation projects. Structural design experience involving dams, water treatment plants, pump stations, levees, lake intakes, or conveyance structures. Experience serving as a Lead Structural Engineer or Project Manager on complex infrastructure projects. Strong client relationship management and business development experience. Experience mentoring engineers and overseeing engineering design teams. Familiarity with sustainable structural design practices and embodied carbon reduction initiatives.

Job Description We are seeking an experienced Pipe Fitter to install, assemble, and maintain piping systems for commercial and industrial applications. The ideal candidate will have experience working with various piping materials and ensuring high-quality installations that comply with industry standards and regulations. Key Responsibilities: • Install, inspect, and repair piping systems, including water, gas, and industrial piping., • Cut, thread, weld, and assemble pipes using various tools and techniques., • Read and interpret blueprints, schematics, and specifications to determine the layout and installation of piping systems., • Ensure compliance with safety regulations, industry codes, and project requirements., • Test piping systems for leaks using pressure gauges and other testing equipment., • Work closely with other trades, including welders, plumbers, and general contractors., • Maintain an organized and safe work environment, adhering to OSHA standards., • Train and mentor apprentices and junior pipe fitters. Qualifications:, • High school diploma or equivalent., • Minimum of 3-5 years of experience in pipe fitting for commercial or industrial projects., • Ability to read and interpret blueprints, technical drawings, and piping schematics., • Experience working with a variety of pipe materials, including steel, copper, and PVC., • Proficiency in using pipe fitting tools, including cutting, threading, and welding equipment., • Strong problem-solving and troubleshooting skills., • Ability to lift and carry heavy materials and work in various environmental conditions., • Valid driver’s license with a clean driving record., • Ability to pass background check and drug screening. Preferred Skills:, • Certification in pipe fitting or welding., • Experience with industrial piping systems and HVAC piping., • Strong communication and teamwork skills., • Ability to work independently and manage multiple projects. (Pay is based on experience) Apply Now to get in contact with a recruiter!

Job DescriptionReady for a Project That Rewards Precision and Pace? Do you thrive on assembling big, complex systems—and seeing them stand tall? Can you read a plan set at 7:00 a.m., rig safely, and execute without missing a step? If yes, you might be exactly who we need in Abilene, TX. Your Options on Our Crew • Telehandler/SkyTrak Operator for commercial construction support, • PEMB/IMP Installer focused on pre‑engineered metal buildings and insulated metal panels Both roles share the same compensation and per diem structure. Why This Project • Location: Abilene, TX, • Employment Type: Full-Time, Contract, • Pay: $25/hr DOE + $115/day per diem, • Work 6 days → get 7 days of per diem; work 7 days → get 8 days of per diem, • Paid 0.5 hour daily for the bus ride to the site (ride is about 10 minutes), • Per diem is ONLY available to candidates traveling in and staying in the local area A Week on the Job, • Mon–Fri, 7:00–5:00 with a 45‑minute lunch, • Saturday, 7:00–3:30 (8 hours), • Occasional Sunday, 4 hours (no double pay) What You’ll Tackle, • Install IMP wall panels and PEMB components with a sharp eye for detail, • Connect structural steel and building systems—no welding, • Follow drawings, blueprints, and layouts to assemble prefab systems, • Operate lifts and rigging equipment and use hand/power tools safely, • Perform confidently at heights on an active commercial site, • Partner with crew leaders and field supervisors to hit schedule targets What It Takes, • OSHA 30 certification (required), • Comfort working at heights and in changing weather, • Reliable transportation and solid attendance, • Physical ability to lift heavy materials and stay productive, • Safety‑driven, team‑first mindset Bring These Skills to Stand Out, • Rigging and load handling, • Blueprint reading, • Experience with Butler Buildings, • Insulated metal panel installation, • Ironwork installation, • Pre‑Engineered Metal Building erection, • Structural steel assembly, • Working safely at heights Who Succeeds Here Mechanically inclined builders who own their craft—balancing quality, pace, and safety—while contributing to a reliable, tight‑knit field team.

Job Description Metal Building Assembler #1 Roofer OVERVIEW Metal Building Assembler with 3+ years’ experience with skills that include both erection and sheeting phases of pre-engineered metal building installation. Dedication to safety is priority one. Ability to read erection drawings and manufacturer’s installation manuals. Ability to work as a primary steel connector, secondary steel connector or building sheeter. RESPONSIBILITIES AND DUTIES • Follow all OSHA 1926 safety guidelines (as a minimum), • Follow all Schwob Steel Structures safety guidelines, • Follow all job specific safety programs as outlined and instructed by the project supervisor or job specific orientation provided by GC, • Communicating effectively with project superintendent/foreman, • Assist in Unloading material, • Assist in Material shakeout and organization, • Understanding manufacturer’s part numbers, • Assist in erecting pre-engineered primary and secondary steel, • Detail primary and secondary steel, • Assist in installing single skin wall panels, • Assist in installing insulated metal wall panels, • Assist in installing standing seam roof with various insulation systems, • Assist in installing metal deck, • Participate in safety training programs, • Participate in quality training programs, • Must be comfortable working at elevated heights QUALIFICATIONS AND SKILLS • 3+ years’ experience in pre-engineered metal building erection, • Qualified rigger / signal person (must be able to pass 3rd party certification), • OSHA 10, • Certified Reach Forklift Operator, • Certified Aerial Work Platform Operator, • Ability to read Manufacturer’s Erection Drawings, • Physical Strength when performing heavy labor that is required from construction workers such as lifting heavy material in excess of 50lbs., • Physical stamina in order to handle the long hours of performing strenuous work during the day in hot and cold weather. SALARY AND BENEFITS $20-25hr 401k program with profit sharing match End of year discretionary bonus End of year profit sharing Eligible for health care after 30 days

Job Description Job Title: Quality Inspector Shift: 1st: 7:30am-4pm Pay: $18-$22 Job Description The Quality Inspector is responsible for verifying the quality and dimensional accuracy of metal products prior to shipment. This role involves conducting physical inspections using precision measuring equipment, documenting inspection results, identifying non-conforming materials, and ensuring customer specifications are met. The inspector works closely with production and quality personnel to support the delivery of high-quality products to industrial, aerospace, and defense customers. Responsibilities • Conduct physical inspections of metal products using precision measuring equipment., • Document inspection results and identify non-conforming materials., • Ensure customer specifications are met., • Collaborate with production and quality personnel to maintain high-quality standards., • Escalate discrepancies appropriately and ensure quality issues are addressed. Essential Skills • Proficiency with calipers, micrometers, dial indicators, feeler gauges, and pin gauges., • Ability to read and complete work orders, travelers, and production documentation accurately., • Experience performing dimensional inspections on metal or manufactured products., • Basic computer skills for entering inspection data and tracking production information., • Strong attention to detail and commitment to quality standards. Additional Skills & Qualifications • High School Diploma or GED., • Ability to lift up to 50 pounds regularly and up to 100 pounds occasionally., • Ability to work safely in a manufacturing or warehouse environment., • 2+ years of quality inspection experience., • Aerospace, defense, metals, machining, or manufacturing experience., • Military experience, especially in technical or avionics roles., • Forklift certification or prior forklift experience., • Experience working with quality management systems and inspection processes., • Familiarity with overhead cranes and material handling equipment. Why Work Here? Join a leading metals distributor serving aerospace and defense customers with a stable first-shift schedule and limited overtime requirements. Enjoy a hands-on quality role with responsibility and visibility, immediate interview process, and quick hiring timeline. Benefit from extensive safety and orientation training while gaining experience with precision measuring instruments and critical customer specifications. Explore advancement opportunities within a large national organization. Work Environment The position is set in a manufacturing and warehouse environment with exposure to moving equipment and machinery. The role requires frequent standing, walking, and physical inspection activities throughout the day. Personal Protective Equipment (PPE) such as a hard hat, safety glasses, steel-toe or metatarsal boots, and long pants are required. Noise levels may be high at times, and collaboration with Quality Analysts, production teams, and warehouse personnel is essential. The schedule is Monday-Friday, 7:30 AM to 4:00 PM, with occasional overtime. Job Type & Location This is a Contract to Hire position based out of Garland, TX. Pay and Benefits The pay range for this position is $18.00 - $22.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Garland,TX. Application Deadline This position is anticipated to close on Oct 23, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Garland Stainless Steel Manufacturing Company seeking an Experienced Assembler-Willing to Train the Right Person Employment type: 2nd Shift-Full-Time (4) 10-Hour Days Monday-Thursday 3:15pm-1:45am Duties include but are not Limited to the Following: • Assembles products, adhering to all productivity and quality standards, procedures, and goals, • Reads work orders, follows production drawings and/or receives verbal instructions regarding duties to be performed, • Assemblers perform mechanical assembly, modifications, set-ups, installations, repairs, copper & PVC plumbing and reworks after inspection or test, • Producing ZERO Defects, • First Piece approvals and Final part inspections, • Work in a fast-paced environment, • Basic knowledge of wiring handling, • Glass installs on required assemblies. *Must be detail oriented Bilingual Candidates (English/Spanish) is a PLUS, but not Mandatory. Candidate must be a Self-Starter, Motivated, and Dependable Compensation: $17-$19 Hourly Depending on Experience Competitive wages, 401K, health insurance, Paid Vacation and Holidays, Bonus Programs and many other Perks. Weekends and OT as needed Please submit resume or reply detailing experience and providing salary history and contact information. \nCompany Description AFB Manufacturing is a growing 75+ year old family-owned company. AFB Manufacturing is an industry leader in our niche market, serving multi-billion dollar companies all over the world. Our specialty protects us from imports, so our team members have no job insecurity relating to offshore competition. We expanded our Garland, Texas manufacturing facility and capacity multiple times in the past 10+ years and the only thing we need are people who care about the quality of their work and want to learn and develop new skills as needs arise. AFB Manufacturing is a growing 75+ year old family-owned company. AFB Manufacturing is an industry leader in our niche market, serving multi-billion dollar companies all over the world. Our specialty protects us from imports, so our team members have no job insecurity relating to offshore competition. We expanded our Garland, Texas manufacturing facility and capacity multiple times in the past 10+ years and the only thing we need are people who care about the quality of their work and want to learn and develop new skills as needs arise.

Job Description We are seeking a Production Technician to process and clean new and in process chamber parts at our state-of-the-art facility in Carrollton. These manufacturing processes may use various different machines, processes, and chemicals to meet our customers' needs. This position comes with a highly competitive starting pay rate, second-to-none benefits, and high ceiling for advancement! Essential Duties and Responsibilities: Process parts utilizing both chemical and manual cleaning methods. May perform receiving, processing, wiping, scrubbing, masking, chemical processing, machine operating, etching, blasting, coating, drying, baking, and other processes, as needed. Follows all SOPs, Lean manufacturing processes, company policies and practices. Perform daily organization and upkeep of assigned process area. Handle hazardous chemicals correctly and safely. Follow all policies and directions for safe use of and proper disposal of hazardous chemicals Must have exceptional skill at organizing tasks, efficiently managing their time and the ability to report out achieved task goals. Maintain high degree of safety and environmental awareness through the practice of safe work habits. Seeks to advance skills and learn new processes. Receive and inspect incoming materials and shipments. Verify quantity, part number, revision level, and documentation accuracy. Process receipts in ERP/SAP system. Label, store, and distribute materials to appropriate locations. Maintain inventory accuracy and traceability. Follow ESD, safety, quality, and cleanroom requirements where applicable. Support cycle counts and inventory audits. Communicate receiving issues to Purchasing, Quality, and Production teams. Requirements: Ability to handle repetitive work and provide fast turn-around on production related to masking, wiping, processing parts. Good verbal and written communications Computer literate, specifically Microsoft Word and Excel Ability to work a flexible work schedule including some weekend and evening work. Comfortability in PPE depending on department (steel toed boots, long garments, hazmat suit) High school diploma or GED required. 1–3 years of receiving, warehouse, inventory, or manufacturing experience preferred. Experience with ERP systems (SAP preferred). Ability to verify incoming shipments against purchase orders, packing slips, and receiving documentation. Basic understanding of inventory control and material traceability. Ability to identify and report discrepancies, shortages, and damaged materials. Proficient in Microsoft Office applications and data entry. Strong attention to detail and organizational skills. Ability to work independently and as part of a team Preferences: 1-year experience in manufacturing processes or materials. Maintain high degree of safety and environmental awareness through the practice of safe work habits and 6S Ability to take SPC measurements and log data 3+ years of hands-on experience preferred Experience in parts cleaning and coating technologies is desired

Job Description Pay: $17.00–$17.50 per hour Schedule: Wednesday–Saturday Shift: 2nd Shift We are currently hiring 2nd Shift Assemblers for a fast-paced production environment. This position is ideal for dependable candidates who are comfortable working evening and overnight hours and can follow workplace safety, quality, and appearance requirements. Available Schedules: • Wednesday–Saturday | 4:00 PM–2:30 AM | $17.00/hr, • Wednesday–Saturday | 5:00 PM–3:30 AM | $17.50/hr Job Responsibilities: • Perform assembly and production tasks according to instructions, • Follow established safety and quality procedures, • Inspect assembled products for quality and accuracy, • Maintain a clean and organized work area, • Work efficiently as part of a production team, • Follow all company policies and workplace requirements Requirements: • Must be able to pass a background check, • Must be able to pass a drug test, • Must meet E-Verify employment eligibility requirements, • Must be dependable and able to work the full Wednesday–Saturday schedule, • Ability to follow instructions and work in a fast-paced environment Dress Code: Employees must wear: • Plain T-shirt, • Jeans, • Steel-toed shoes The following are not permitted in the production area: • False nails or false eyelashes, • Nail polish, • Jewelry of any kind, • Watches, hats, or other accessories, • Shorts, • Sweatpants, • Leggings, • Ripped or torn jeans Apply today for immediate consideration! \nCompany Description At VSSI, LLC our staff is committed to supplying our clients with the very best talent in the industry. Our extensive experience gives us a unique perspective on how to recruit, hire, train, and retain employees. It also insures you are working with a company that understands your staffing requirements. We provide personnel in a wide range of areas and disciplines. Our candidates are available on temporary, contract and direct hire basis. We provide candidates with levels of experience ranging from executive to entry level. VSSI develops a strong business partnership with our clients by consulting, designing, and delivering customized staffing and training solutions. We deliver results by matching the right people with the right job, the net results is less turnover, higher productivity, and a long-term assignment. VSSI Offers: Competitive Mark-up Rates Flexible Overtime Rate Employee Guarantee Time Keeping System Retention / Motivation Programs Training /Skills Assessment I-9 Verification Drug Testing Nationwide Background Checks Customized Reports At VSSI, LLC our staff is committed to supplying our clients with the very best talent in the industry. Our extensive experience gives us a unique perspective on how to recruit, hire, train, and retain employees. It also insures you are working with a company that understands your staffing requirements. We provide personnel in a wide range of areas and disciplines. Our candidates are available on temporary, contract and direct hire basis. We provide candidates with levels of experience ranging from executive to entry level.\r\n\r\nVSSI develops a strong business partnership with our clients by consulting, designing, and delivering customized staffing and training solutions. We deliver results by matching the right people with the right job, the net results is less turnover, higher productivity, and a long-term assignment.\r\n\r\nVSSI Offers:\r\n\r\nCompetitive Mark-up Rates\r\nFlexible Overtime Rate\r\nEmployee Guarantee\r\nTime Keeping System\r\nRetention / Motivation Programs\r\nTraining /Skills Assessment\r\nI-9 Verification\r\nDrug Testing\r\nNationwide Background Checks\r\nCustomized Reports

Job DescriptionCommercial Concrete Finisher. General Description: Responsible for performing a variety of carpentry tasks associated with prepping, pouring, placing, and finishing of concrete. Tasks include erecting and setting forms for concrete structures, foundations, buildings, and site work per specifications and drawings. This may include concrete tilt-wall forms, symon forms and/or structural forms for columns, decks, elevator cores, parking garages and other cast-in-place concrete structures. Responsibilities: • Ability to read and understand drawings and prints., • Build and/or assemble wood or metal forms for the construction of concrete floors, slabs, walls, columns, tilt-walls, elevated concrete slabs, elevator cores, stairways, etc., • Set and place forms to proper elevations and locations and may aid in installing reinforcing steel., • Set and erect forms using a wide variety of materials and forming systems, primarily symon forms., • Verify accuracy of structures using a plumb bob, carpenters level, laser and/or digital transit., • Erect scaffolding and ladders for assembling structures above ground level., • Communicate with Foreman, Riding Boss, or Project Manager regarding any problems arising, materials required, or any safety hazards identified., • Ensure equipment is all in safe working condition., • May help signal concrete deliverer to position truck to facilitate pouring., • Responsible for observing and complying with all safety policies and guidelines., • Assist with placement of concrete as needed., • Perform other duties as assigned. Preferred Qualifications: • Experience in construction or contracting industry., • Excellent written and verbal communication skills., • Strong analytical and critical thinking skills., • Strong attention to detail.

Job Description Employment Details: • Recognized Civil Infrastructure Consulting firm in the US & Canada, • 100% employee owned, • Full Benefits: Health, Vision, Dental, and 401K match, • Sign on bonus opporunity, • Paid OT and Annual Performance Bonus Responsibilities: • Conduct structural analysis, design review, and project management activities for water and wastewater municipal facilities that include steel, masonry, and reinforced concrete materials, • Manage Structural Engineering responsibilities of Water/Wastewater projects across the region from planning, construction, and commissioning, • Mentor junior and mid-level Structural Engineers, • Prepare reports, develop plans, and specifications, • Prepare cost estimates for various Structural projects, • Makes site visits to observe during construction and operation Qualifications: • Bachelor’s degree in Structural Engineering, • Registration as a Professional Engineer or Structural Engineer in Texas, • 10 - 15 years of experience as a Structural Engineer, preferably in the Civil Wet Infrastructure and Water Storage space, • Strong design experience of Steel, Masonry, & Reinforced-Concrete structures and proficiency in using STAAD, RISA 3D, Excel, TEDDS, Microstation and AutoCAD, • Extensive experience with medium and large-scale municipal projects that include storage tanks, water treatment facilities, and other supporting structures for Water/Wastewater related facilities, • Masters degree in Civil or Structural Engineering (+) or a PhD in Structural Engineering (+)

Job Description Position Overview We are seeking an experienced Senior Structural Engineer to lead projects involving structural rehabilitation, historic preservation, facility assessments, and adaptive reuse of existing buildings and structures. This position will focus on evaluating existing structural systems, identifying deficiencies, developing repair and strengthening solutions, and overseeing the rehabilitation and transformation of existing facilities. The ideal candidate has a strong background in structural engineering consulting, existing building evaluations, restoration, and adaptive reuse, with the ability to independently manage complex engineering projects, coordinate multidisciplinary teams, and provide technical leadership. Projects may include commercial buildings, historic structures, educational facilities, civic buildings, aviation facilities, and other existing infrastructure. Key Responsibilities Lead structural engineering and design efforts for building rehabilitation, restoration, adaptive reuse, and facility assessment projects. Perform structural evaluations, condition assessments, and field investigations of existing buildings and structures. Identify structural deficiencies, deterioration, damage, and potential safety concerns. Develop structural repair, reinforcement, retrofit, and rehabilitation solutions. Perform structural analysis and engineering calculations for existing and modified structural systems. Prepare detailed structural drawings, specifications, technical reports, and engineering recommendations. Evaluate structural systems involving steel, concrete, masonry, wood, and other building materials. Support historic preservation projects by developing structural solutions that accommodate existing building conditions and preservation objectives. Coordinate with architects, engineers, consultants, contractors, and building owners throughout project development. Manage project budgets, schedules, deliverables, and technical quality. Conduct site visits and provide construction-phase engineering support. Review structural designs, calculations, specifications, and project documentation for compliance with applicable codes and standards. Provide technical guidance, training, and mentorship to junior engineers and design staff. Assist with resolving field conditions, constructability challenges, and unforeseen structural issues. Maintain strong client relationships and participate in project interviews, presentations, and business development activities. Incorporate sustainable design principles, including preservation and reuse of existing structural systems where appropriate. Required Qualifications Bachelor's degree in Civil, Structural, or Architectural Engineering, or equivalent. Professional Engineer (PE) license required. 7+ years of structural engineering experience within a building design consulting environment. Strong experience with structural analysis, design, and evaluation of existing buildings. Knowledge of structural rehabilitation, repair methods, strengthening techniques, and building modifications. Advanced understanding of structural mechanics, load paths, material behavior, and engineering design principles. Experience working with steel, reinforced concrete, masonry, wood, and other structural systems. Ability to perform structural assessments, prepare engineering reports, and develop technical recommendations. Advanced proficiency in preparing and reviewing structural calculations, construction drawings, and specifications. Experience leading engineering projects and coordinating multidisciplinary design teams. Strong knowledge of applicable building codes, engineering standards, and construction practices. Ability to independently perform technical reviews and final quality control checks. Experience managing project budgets, schedules, and client expectations. Strong leadership, mentoring, communication, and problem-solving skills. Proficiency with Microsoft Office, including Excel, Word, and Outlook. Ability to travel up to 20%, including occasional overnight stays. Preferred Qualifications Master's degree in Structural Engineering. 12+ years of structural engineering experience. Extensive experience with structural rehabilitation, historic preservation, restoration, and adaptive reuse projects. Experience evaluating aging buildings, deteriorated structural systems, and existing facilities. Background in structural retrofits, strengthening, repairs, and building modifications. Experience with facility condition assessments and forensic structural investigations. Familiarity with existing building codes and structural evaluation requirements. Experience working on commercial, civic, educational, aviation, or historic facilities. Experience serving as a Lead Structural Engineer or Project Manager on complex rehabilitation projects. Strong client relationship management and business development experience. Experience mentoring engineers and overseeing structural design teams. Familiarity with sustainable structural design and embodied carbon reduction initiatives.

Job Description Job Title: Powder Coat Painter 1st shift: 5:30am-2:00pm $20hr Job Description Join a Texas-based independent producer of custom electrical enclosure solutions, known for its family-oriented approach and over 50 years of business excellence. The company serves a diverse clientele including Material Handling Systems, OEMs, Building Automation Systems, and Distribution. Responsibilities • Hang parts on the paint line, engaging in consistent lifting of materials up to 50 pounds., • Work in a paint booth, an industrial environment dealing with aluminum and other metals., • Assist in paint preparation, racking, and sandblasting tasks., • Utilize a spray gun for industrial painting tasks, ensuring high-quality finishes., • Participate in general labor and assembly tasks as needed. Essential Skills • Experience in spray painting and blasting., • Capability to lift heavy materials up to 50 pounds., • Proficiency in powder coating, industrial painting, and paint prep. Additional Skills & Qualifications • Experience in automotive collision repair, sanding, coating, and production., • Familiarity with hand tools and grinding. Why Work Here? Experience growth opportunities in a family-owned company that values its employees. The company provides a supportive environment with room for career advancement. Work Environment The work environment is primarily non-climate controlled, with large fans positioned throughout the site for airflow. However, the paint area is air-conditioned. Personal protective equipment, including steel-toed boots, eye protection, and ear plugs, is provided for safety. The work schedule is Monday through Friday, 5:30 AM to 2:00 PM. Job Type & Location This is a Contract to Hire position based out of Garland, TX. Pay and Benefits The pay range for this position is $20.00 - $20.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Job Type & Location This is a Contract to Hire position based out of Garland, TX. Application Deadline This position is anticipated to close on Oct 30, 2026. Workplace Type This is a fully onsite position in Garland,TX. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description SPRINKLER CONSTRUCTION FITTER JOB DESCRIPTION Job Responsibilities include but are not limited to: • Assist foreman with installation, service, and trouble-shooting of automatic fire sprinkler systems along with all its related equipment, • Assist foreman with installation of fire sprinkler systems in residential, commercial, and industrial buildings, • Learn and use project drawings to accurately and entirely interpret and installation requirement details and layout as needed, • Learn to thread and groove pipe, cut hanger rods, frequently climb ladders, hang pipe, read blueprints, layout, keep clean work area, and use appropriate equipment for any specific job such as tools, lifts, etc., • Other duties as assigned Expectations: • Believe In, Live, and Support Our Mission Statement, Core Values and Business Plan Daily, • Safety First, • Ensure timely and complete submittal of JSAs, Toolbox Talks, Audit Forms, etc., • Ensure timely and accurate Incident and Accident Reporting, • Hold yourself accountable for all Safety Initiatives, • Hold yourself accountable for Safe Driving of Company Vehicles, • Ensure awareness and support of Stop Work Authority, • Complete all Training Requirements – Safety, Certifications, etc., • Submit accurate Timesheet – job numbers/names, OT and travel pay, completed on time, etc., support transition to Electronic timesheet submittal, • Ensure all required documents are complete, accurate and professional, with required signatures, • Ensure proper Inventory Management – review, update, and approve packing slips – submitted timely, proper material management, • Ensure proper Maintenance and care of equipment – trucks, lifts, tools, etc., • Keep jobsites clean and organized, • Ensure Production Efficiency – awareness of budget vs. actual labor hours and proactive communication with superintendent, • Support and Ensure Adherence to Company SOPs – Purchase Orders, Change Orders, etc., • Timeliness – at the job on time; attendance; communication with supervisor; paperwork, • Ensure Customer Satisfaction and respond to Customer Satisfaction Survey feedback improvement opportunities, • Maintain Quality Control i.e. reduce the need for return trips and warranty work, • Maintain a Professional appearance, • Communicate effectively and professionally within the department and with internal and external customers, • Teamwork – maintain positive interactions within your team, local office, etc., • Actively Participate in required team meetings, • Ability to work overtime, out of town or on-call as needed Knowledge: • Basic Math and Reading, • Minimum education of High School Diploma or Equivalent Work Experience: • Minimum of five (5) years relevant work experience, • Fire Sprinkler installation experience, • Experience cutting steel pipe for new construction or remodel projects Skills and Competencies: • Ability to take direction from upper management, • Must have valid state driver's license and good driving record, • Self-motivated, Ambitious, Interactive, Communicative, Detail-oriented and Organized, • Demonstrate ability to accurately read measurements from tape or scales

Job Description . Class A CDL Drivers Needed ASAP! OTR Route- Home Weekly - $5K SIGN ON BONUS! • Average up to $1600 per week!, • Requires: Class A CDL, at least 1 year OTR tractor/trailer driving experience within 3 states and 6 months of it flatbed within the last 5 years. Must have experience with pipe and steel as well as straps, tarps, chains and binders., • Home weekly but not on weekends. Do you need more information on this position or would you like to apply? Call or text Jennifer at (214) 301-8763. Job Posted by ApplicantPro

Job Description Commercial Construction Contractor seeking Senior Estimators/Project Managers within the DFW metro area. Opportunity for a commercial construction estimators'/project managers in OSBSCORP (4) Operating Divisions (Steel, Electrical, Framing/Drywall/Waterproofing, Facility Management) in DFW region. K12 schools, shopping centers, restaurants, commercial tenant finish-outs, and retail projects. This position is located in our Plano office. Job Summary: Senior Estimators/Project Managers are responsible for complete management of projects. This includes electronic take-off of plans, compiling complete cost estimates, bid tabulation forms, financial management of project, project buy-out, quality assurance, budget, contract management, ASI/Change Order management and other activities required to successfully complete awarded jobs. Candidates need to meet the following criteria: • Minimum 5 years of commercial construction estimating or project management experience, • Must be proficient in current estimating techniques and automation, • AI Software Platforms, • Work in a fast-paced environment in order to meet deadlines, • Excellent communication skills - oral, written, and via emails, • Strong sourcing/negotiation skills, • Knowledge of vendor companies in various areas and ability to locate/develop new vendors., • Must be able to read and understand construction drawings, • Manage project financial objectives, • Manage daily and weekly production objectives, • Desirable Computer Skills- Microsoft 365, Procore, Autodesk, Stack, BIM, Raken, Takeoff AI, Togal.AI, Beam, Trimble, Drop Box, Smartsheets, Blue Beam, Construction Connect, Raken, On Screen Take-Off, Planswift, BuzzBid, • Must provide at least 3 job related references Company Benefits: Health Insurance, Vacation, 401 Plan. \nCompany Description One Sources Building Services mission is to provide clients with specialized commercial construction and facility management services that deliver superior value while maintaining quality, safety, and minimizing disruption to client operations. One Sources Building Services mission is to provide clients with specialized commercial construction and facility management services that deliver superior value while maintaining quality, safety, and minimizing disruption to client operations.

Substation Engineering Company (SECo) is a full-service engineering and design firm delivering high-quality solutions to electric utilities nationwide. Our expertise spans substation, switchyard, transmission, and distribution projects, enhanced by advanced laser scanning and 3D modeling capabilities. We integrate strong engineering fundamentals with efficient, forward-thinking processes to deliver safe, reliable, and constructible solutions for critical infrastructure. In partnership with Tier 1 Utility Design, Inc. (Tier 1), a certified woman-owned engineering firm, we cultivate a collaborative, engineering-driven environment where ideas are shared openly, challenges are addressed proactively, and technical excellence is the standard. Our team is committed to ownership, continuous improvement, and a supportive culture that values both professional growth and work–life balance. We’re looking for a Civil Structural Engineer with direct substation experience to join our growing team. In this mid-level role, you’ll design concrete foundations and steel structures for substations that power the national grid. This is a technical, non-supervisory position ideal for engineers looking to deepen their impact on major utility projects. Key Responsibilities: • Develop engineering designs and calculations for concrete foundations and steel support structures, • Analyze structures using tools like STAAD, MathCAD, and LPILE, • Create and review engineering deliverables, working closely with designers and drafters, • Ensure all designs meet ASCE 113 and other applicable codes and standards, • Collaborate across teams to support high-quality, timely project delivery Qualifications: • Bachelor’s degree in Civil Engineering, • 3+ years of civil/structural engineering experience in substation projects, • Professional Engineer license required, • Proficiency in STAAD, MathCAD, LPILE, or comparable analysis tools, • Experience with reinforced concrete and structural steel design, • Familiarity with transmission and distribution utility standards What We Offer: • Competitive salary (commensurate with experience), • Comprehensive benefits: medical, dental, vision, life & disability insurance, • 401(k) match and generous paid time off, • Paid parental leave, • Collaborative team culture focused on quality, integrity, and work-life balance

What’s in it for you? -Competitive salary with annual salary review and bonus. -FULLY paid top tier medical, dental, & vision benefits for you and your family. -Outstanding paid time off policy. -Student Loan Assistance, up to $5,000 annually as eligible. -Learning and Development Opportunities including Tuition Reimbursement. -Highly engaged culture, stable workforce, within a strong, growing global company At Etex, our purpose is to build better together. We are an international leader in sustainable construction, driven by a passion for excellence, but it's our people that are our top priority. We connect, collaborate, and champion the well-being of our employees, forming partnerships and pioneering change in our ever-evolving industry. At Etex, we seek to make a meaningful impact on the lives of our customers and our communities. Are you looking for a company where you can learn, grow and lead? Join us as a Business Development Manager- Healthcare, Data Centers, & Adjoining Markets where you can work remote from anywhere in the United States. The mission of the role is to drive market development, specification influence, and project conversion within high-value, code-driven segments. The position will focus on building relationships with architects, engineers, consultants, contractors, and owners to position Promat as the preferred partner for passive fire protection solutions. Success in this role will be defined by early-stage specification wins, pipeline development, and effective pull-through to project conversion. What you’ll do • Develop and execute a targeted growth strategy across Healthcare, Data Centers, and Adjoining Occupancy markets., • Build and manage relationships with key stakeholders (architects, engineers, consultants, contractors, and owners) to drive early-stage engagement., • Lead specification efforts for steel column fire protection systems and compartmentation solutions., • Identify, track, and influence projects from design through construction., • Provide technical support and position Promat solutions in alignment with code requirements and project needs., • Collaborate cross-functionally (technical, marketing, product teams) to support solution development and demand generation., • Monitor market trends, competitive activity, and code developments to inform strategy., • Work closely with technical, marketing, and product development teams to tailor solutions and deliver compelling value propositions., • Represent Promat at industry events, trade shows, and conferences relevant to the data center and mission-critical infrastructure sectors., • Ability to travel (estimated 40–60%). What you’ll bring Required Skills • Proven experience (5+ years) in business development or technical sales, ideally within the construction materials, fire protection, or data center sectors, • Strong understanding of construction lifecycle, specification process, and critical performance requirements, • Technical background (engineering, architecture, construction science) preferred, • Ability to manage complex projects and navigate multiple stakeholders, • Exceptional communication, negotiation, and presentation skills, • Comfortable working in a matrixed, multinational organization, • Track record of meeting or exceeding sales targets, • Proficient in CRM systems (e.g., Salesforce) and Microsoft Office Suite, • Self-motivated, results-driven, and comfortable working remotely Preferred • Experience selling passive fire protection products or insulation materials, • Technical understanding of fire stopping, fireproofing, or thermal insulation systems, • Existing relationships with distributors, contractors, or specifiers, • Familiarity with LEED, green building standards, and sustainability drivers Why join us? • We are named the world's #1 most trustworthy company in the construction sector by Newsweek and Statista in 2023!, • Our culture – we connect & care about those around us. We nurture teamwork, communities, partnerships and new ways of working, placing the highest importance on the safety and working environment of our people., • Our ‘Road to Sustainability 2030’ is our plan to help build a better, sustainable future. We work towards this vision by caring about our social and environmental impacts and developing innovative solutions., • We have a strong conviction that diversity of thinking helps us to deliver a strong and sustainable performance. It is also essential for us that everyone feels part of the team. In this spirit, we are committed to equal opportunities and zero tolerance towards discrimination., • Flexibility: For us, hybrid and flexible working is all about trust, and we want you to be able to do your best work.

Direct placement with a leading North American infrastructure engineering and construction company that builds, installs, maintains, and upgrades critical systems across energy, utilities, communications, and heavy civil markets This position sits remote with minor travel throughout the year up to 20-25%. Travel will be for 1-3 days onsite at the project. Key Responsibilities: • Perform preliminary and detailed structural engineering design for substation, utility, and power infrastructure projects., • Perform structural analysis and engineering calculations to ensure safe and reliable performance., • Design and evaluate equipment support structures, foundations, steel structures, concrete structures, and other project-specific structural components., • Develop design criteria, engineering specifications, calculations, drawings, and technical documentation., • Prepare engineering layouts and markups and provide technical direction to CAD/design technicians., • Review structural drawings and engineering packages for quality, accuracy, constructability, and compliance with project requirements., • Coordinate structural requirements with civil, electrical, P&C, construction, and project management teams., • Evaluate existing structures and field conditions to support modifications and new installations., • Support site visits, field measurements, and collection of data required to complete structural designs., • Provide engineering support during construction and assist in resolving structural design or field issues., • Support project estimating, scheduling, and planning activities., • Assist with technical evaluations of equipment, materials, and contractor/vendor information as required., • Ensure engineering work complies with applicable company QA/QC, safety, design, and document-control requirements., • Apply applicable structural engineering codes, standards, and project specifications., • Maintain complete and accurate engineering records and documentation throughout the project lifecycle and engineering deliverables while maintaining project schedules and quality expectations REQUIRED SKILLS AND EXPERIENCE • Bachelor’s degree in Civil Engineering or a related engineering discipline., • Professional experience in civil engineering design, preferably supporting utility, power, substation, energy, or other infrastructure projects., • Experience developing and reviewing engineering drawings, layouts, calculations, and design packages., • Ability to develop engineering markups and effectively communicate design requirements to CAD/design personnel., • Experience coordinating civil design with other engineering disciplines., • Understanding of grading, drainage, site development, foundations, and general civil/site design principles., • Experience with AutoCAD, Civil 3D, MicroStation, and/or comparable engineering design software., • Proficiency with Bluebeam or similar engineering review/collaboration tools., • Strong understanding of engineering QA/QC and construction documentation., • Strong written and verbal communication skills.

Substation Engineering Company (SECo) is a full-service engineering and design firm delivering high-quality solutions to electric utilities nationwide. Our expertise spans substation, switchyard, transmission, and distribution projects, enhanced by advanced laser scanning and 3D modeling capabilities. We integrate strong engineering fundamentals with efficient, forward-thinking processes to deliver safe, reliable, and constructible solutions for critical infrastructure. In partnership with Tier 1 Utility Design, Inc. (Tier 1), a certified woman-owned engineering firm, we cultivate a collaborative, engineering-driven environment where ideas are shared openly, challenges are addressed proactively, and technical excellence is the standard. Our team is committed to ownership, continuous improvement, and a supportive culture that values both professional growth and work–life balance. Job Description: Lead structural engineering position focusing on the performance of both routine and complex activities and tasks related to the design of high voltage transmission lines (69kV through 765kV). Typical duties include (but are not limited to): • Perform complex tasks requiring the application of structural engineering techniques and procedures to prepare calculations, drawings, construction documents and engineering estimates and evaluations for construction projects using in depth experience and knowledge of structural design., • Develop and maintain design standards, material and equipment specifications, construction standards, and engineering practices for overhead and underground transmission lines., • Use experience to anticipate engineering and construction needs and leadership to provide advice and recommendations to support construction., • Lend support to the establishment of line ratings through LiDAR survey evaluation and other survey and inspection methods., • Lead and mentor less experienced team members to manage and execute design projects and construction support and review work of others to assure adherence to client and industry codes, standards, and good utility practice., • Monitor budget and schedule for assigned tasks., • Work with designers, drafters and lower level engineers to guide the development of drawings. Desired Education, Experience, and Training: • Bachelor’s Degree in Civil Engineering with a focus in structural and foundation engineering., • 10+ years of progressively responsible experience in the design of steel, wood and concrete structures, and foundations., • Professional Engineering license required., • Proficient in the use of PLS-CADD, PLS-TOWER, and PLS-POLE., • Ability to independently work through individual projects and also play a key role in broader projects., • Accuracy and attention to detail as well as ability to meet deadlines and complete assignments., • Strong written and verbal communication skills in English., • Commitment to customer service and ability to work in a team-oriented environment. Full Benefit package: • Medical/Dental/Vision, • Paid Holidays, • PTO (Paid Time Off), • Group Life Insurance/LTD/AD&D, • 401K, • Voluntary Benefit Plans, • Paid Parental Leave

Summary: The Category Manager – Electronics is responsible for developing and executing the category strategy to drive revenue growth, margin expansion, and working capital optimization within the Electronics portfolio. This role owns supplier relationships, inventory performance, and cross-functional alignment across sales, operations, and finance. The ideal candidate will combine strong commercial acumen with technical product knowledge of solder, cleaning solutions, ESD/Static control, thermal management solutions, Hand tools and workstations with a deep understanding of distribution dynamics in contract and electronics manufacturing. Essential Duties (Include the following; however, other duties may apply.) Category Strategy & Financial Performance • Develop and execute a 1–3-year category strategy aligned with company growth objectives, • Drive revenue, gross margin, and inventory performance (turns, GM, DOS), • Identify white space opportunities, line expansions, and rationalization initiatives, • Lead cost savings initiatives, rebate optimization, and margin improvement programs, • Build and maintain category scorecards and KPIs Supplier Management • Serve as primary commercial contact for strategic Electronics Suppliers (e.g., MAES, Henkel, Zestron, AIM Solder, DOW distributors, Hakko, Chemtronics, and Desco etc.), • Negotiate pricing, rebates, freight terms, payment terms, and inventory programs, • Lead Joint Business Planning (JBP) with key suppliers, • Monitor supplier performance (OTIF, lead times, quality, cost changes), • Manage supply risk and dual-source strategies where appropriate Inventory & Demand Planning • Collaborate with SIOP/Demand Planning to optimize stocking strategy and safety stock levels, • Manage lifecycle (NPI, phase-in/phase-out, obsolescence mitigation), • Improve forecast accuracy and reduce excess/slow-moving inventory, • Align stocking strategies with customer segment needs Pricing & Market Intelligence • Collaborate with Pricing and Commercial team to develop competitive pricing strategies by segment and channel, • Monitor market trends including steel costs, import pressures, tariff exposure, and competitive activity, • Partner with Sales to support large bids, project pricing, and contract negotiations Cross Functional Leadership • Partner with Sales to drive category growth initiatives and training, • Support Marketing on promotions, campaigns, and technical positioning, • Coordinate with Operations to address capacity, lead times, and logistics constraints, • Present category performance updates to executive leadership Education and/or Experience: • Bachelor's Degree required; MBA or CPM/CPIM certification preferred, • 5+ years of experience in category management, product management, or strategic sourcing, • Experience within industrial distribution is strongly preferred, • Electronics marketplace product knowledge, highly desirable, • Proven success negotiating with global manufacturers. Technical & Commercial Skills: • Strong financial acumen (margin analysis, rebate modeling), • Proficient in ERP/MRP systems and advanced Excel, • Understanding of industrial bearing applications (motors pumps, conveyors, gearboxes, etc.), • Experience in managing vendor agreements and contracts Leadership & Competencies: • Strategic thinker with strong analytical capability, • Effective negotiator with executive presence, • Ability to influence cross-functional teams without direct authority, • Strong communication and presentation skills, • Results-driven with high ownership mentality Key Performance Indicators (KPIs): • Supplier rebate attainment, • Inventory turns & working capital reduction, • On-time supplier performance, • Cost savings delivered, • New product / line expansion impact Work Environment: • Hybrid, • Travel up to 25% for supplier visits, trade shows, and customer meetings

Job Description Garland Stainless Steel Manufacturing Company seeking an Experienced Finisher/Polisher Employment type: 2nd Shift-Full-Time (4) 10-hour days Monday-Thursday 3:15pm-1:45am Duties include but not limited to: • First Piece approvals and Final part inspections, • Finish and Polish Precision Metal stainless steel equipment using hand grinders/tools (18-14 gauge being the most common) *Capability of performing routine maintenance on hand tools as needed Job Requirements: *1-3 years’ experience in a sheet metal job shop environment grinding and polishing different alloys of metals, but primarily Stainless Steel *Ability to match material grains using the appropriate hand tools *General knowledge of sheet metal finishing *Knowledge of appropriate wheel dressings, speeds and sequence of operations for achieving the proper finish a must. Candidate must possess Leadership Skills, be a Self-starter, Motivated, and Dependable Bilingual Candidates (English/Spanish) is a PLUS, but not Mandatory. Candidate must be a Self-Starter, Motivated, and Dependable Compensation: $18-$20 Hourly Depending on Experience Competitive wages, 401K, health insurance, Paid Vacation and Holidays, Bonus Programs and many other Perks. Weekends and OT as needed Please submit resume or reply detailing experience and providing salary history and contact information. Company DescriptionAFB Manufacturing is a growing 75+ year old family-owned company. AFB Manufacturing is an industry leader in our niche market, serving multi-billion dollar companies all over the world. Our specialty protects us from imports, so our team members have no job insecurity relating to offshore competition. We expanded our Garland, Texas manufacturing facility and capacity multiple times in the past 10+ years and the only thing we need are people who care about the quality of their work and want to learn and develop new skills as needs arise.AFB Manufacturing is a growing 75+ year old family-owned company. AFB Manufacturing is an industry leader in our niche market, serving multi-billion dollar companies all over the world. Our specialty protects us from imports, so our team members have no job insecurity relating to offshore competition. We expanded our Garland, Texas manufacturing facility and capacity multiple times in the past 10+ years and the only thing we need are people who care about the quality of their work and want to learn and develop new skills as needs arise.

Job Description Work on ground up high rise buildings, multipurpose arenas and parking garages to Install and weld structural steel and other steel components. Layout, fit, assemble and weld structural steel members. Perform FCAW and SMAW welding as required using 7018 and 6011 welding rod. Work with HSS Tubing, angles, channels, beams, columns, plates and miscellaneous steel. Verify measurements and maintain dimensional accuracy. Inspect completed welds and maintain quality standards. Safely operate grinders, saws, welding machines, scissor lifts, forklifts and/or boom lifts. Maintain a clean and organized work area. Following company safety and worksite requirements. Previous structural steel welding experience required. Ability to read and understand structural steel shop drawings highly valued and a definite plus but not required. Experience fitting and welding HSS, angles, channels, beams, columns and plates. Experience with welding 7018 and 6011 (FCAW and SMAW welding processes. Current welding certification is preferred but not required. Ability to use a tape measure, grinders, saws, welding machines, scissor lifts and or forklifts/boomlifts. Ability to work safely and efficiently on active construction job sites. Reliable transportation and dependable attendance. Must be authorized to work in the United States.

Job Description Welder / Fabricator Join our team as a Welder / Fabricator specializing in custom-engineered industrial air handling units, dust collection systems, and containment enclosures. We specialize in custom-building equipment—ranging from dry cartridge collectors and baghouses to specialized wet dust collectors, downdraft tables, and mist collection systems—tailored to specific factory footprints and hazard profiles. Quick facts • Location: Onsite, • Pay: $22.00/hour, • Schedule: Monday–Friday, 6:00 AM – 2:30 PM, • Position type: Temp-to-Hire Why you’ll like this job • Consistent schedule with stable day-shift hours and standard weekday finish times., • Work on varied, custom-engineered equipment rather than repetitive assembly line work., • Opportunity to build skill sets across multiple welding techniques and custom metal fabrication projects. What you’ll do • Welding & Fabrication: Join, fabricate, and repair metal components or complete units using appropriate welding techniques based on blueprints, schematics, and job specs., • Quality Assurance: Inspect completed welds for structural soundness and ensure all completed parts meet strict fabrication specifications., • Process Coordination: Coordinate with small parts team and welding helpers to develop orders, and pass completed units to helpers for weld grinding and hole drilling prior to paint and final inspection., • Measurement & Layout: Accurately read measurements, determine square, and ensure precise fitments., • Documentation & Tracking: Record all worked hours on weekly timesheets and unit travelers, logging any modifications or missing parts into the traveler., • Cross-Department Collaboration: Work closely with supervisors, welding helpers, paint staff, and other departments to ensure timely and accurate completion of orders. What you need • Experience: 2–5 years of industrial metal fabrication and welding experience (or equivalent related background) recommended., • Welding Expertise: Recent hands-on experience with MIG and TIG welding processes, specifically working with galvanized and stainless steel materials., • Technical Skills: Proficiency in reading blueprints, schematics, and diagrams, along with knowledge of plasma arc cutting and core fabrication principles., • Blueprint & Layout Ability: Demonstrated ability to read precision measurements and verify squareness., • Supervision: Ability to work effectively under general supervision, reporting to the Welding/Paint Supervisor and Production Manager. PrideStaff (North Dallas location) is a locally owned staffing & placement firm with a strong reputation as a fun-loving, quality-focused service provider. Our employees enjoy the following: • A professional, supportive team environment, • Representation to North Dallas’ top employers, • Full medical benefits package, • Dedicated consultants who provide industry insights & resources to ensure continued career development These are some of the many reasons we were recently recognized as one of Dallas’ Best Places to Work! Proudly serving North Dallas, Addison, Carrollton, Farmers Branch, Las Colinas, Irving, Coppell, Lewisville, Plano, Richardson, Frisco, and McKinney

Job Description Garland Stainless Steel Manufacturing Company seeking a Qualified Stainless-Steel Gas Tungsten Arc Welder utilizing (GTAW), (TIG) Employment type: 2nd Shift-Full-Time (4) 10-hour days Monday-Thursday 3:15pm-1:45am Duties include but not limited to following: • Interpreting shop drawings, • Weld thin gauge stainless steel, • Work in a fast-paced environment, • Producing ZERO Defects, • First Piece approvals and Final part inspections, • Proven Welding Track Record Bilingual Candidates (English/Spanish) is a PLUS, but not Mandatory. Candidate must be a Self-Starter, Motivated, and Dependable Compensation: $24-$26 Hourly Depending on Experience Competitive Wages, 401K, Health insurance, Paid Vacation and Holidays, and many other Perks. (4) 10-hour Workdays & Weekends/OT as Needed. Please submit resume or reply detailing experience and providing salary history and contact information. \nCompany Description AFB Manufacturing is a growing 75+ year old family-owned company. AFB Manufacturing is an industry leader in our niche market, serving multi-billion dollar companies all over the world. Our specialty protects us from imports, so our team members have no job insecurity relating to offshore competition. We expanded our Garland, Texas manufacturing facility and capacity multiple times in the past 10+ years and the only thing we need are people who care about the quality of their work and want to learn and develop new skills as needs arise. AFB Manufacturing is a growing 75+ year old family-owned company. AFB Manufacturing is an industry leader in our niche market, serving multi-billion dollar companies all over the world. Our specialty protects us from imports, so our team members have no job insecurity relating to offshore competition. We expanded our Garland, Texas manufacturing facility and capacity multiple times in the past 10+ years and the only thing we need are people who care about the quality of their work and want to learn and develop new skills as needs arise.

Job Description Position: Junior Production Welder Location: Plano, TX Schedule: Full‑time Overview: The Junior Production Welder supports manufacturing by performing basic welding tasks, assembling metal components, and maintaining quality standards in a fast‑paced production environment. Key Responsibilities • Perform MIG/TIG welding on steel and aluminum components, • Read and follow basic blueprints, work orders, and production specs, • Operate grinders, cutters, and other fabrication tools, • Inspect welds for accuracy, defects, and structural integrity, • Maintain a clean, safe work area and follow all safety protocols, • Assist senior welders and production leads as needed Qualifications • 0–2 years welding experience (school or shop experience accepted), • Ability to pass a weld test, • Basic understanding of welding tools and safety practices, • Ability to lift 50 lbs and stand for extended periods, • Strong work ethic and willingness to learn Preferred • Welding certification (AWS or equivalent), • Experience in manufacturing or metal fabrication

Texas, Oklahoma, Missouri, Illinois, Kansas, or Midwest).Ceramics, Steel, Metallurgy, Chemical, Glass, Refractory.About the Industry Company / The Opportunity:.Join a leading manufacturer in the manufacturing sector, specializing in metal flow engineering and advanced refractories.Our client is a gl

Eagle Alloy is a steel foundry located in Muskegon, MI and is looking for an Executive Sales Assistant to support the Sales Department.Order Entry consisting of contract review and sending order acknowledgements to customers.Provide regular summaries to management of daily, weekly and monthly order

Steel City Brand | Pittsburgh, PA Part-Time / Contract | In-Person Steel City Brand is looking for a Pittsburgh-based Content Creator who knows how to make great social content — not just shoot video. We want someone who can take a product, an idea, or a moment and turn it into content people actually want to watch. You’ll be responsible for: • Concepting, shooting, and editing short-form social content, • Creating Reels, TikToks, Stories, photos, and other social-first assets, • Making our apparel the hero through styling, movement, details, locations, and storytelling, • Shooting at our stores, warehouse, around Pittsburgh, and wherever the idea takes you, • Finding content opportunities without waiting for a detailed shot list, • Working with our social team to bring the monthly content direction to life You’re probably a fit if: • You already create content and have a portfolio to prove it, • You have a strong eye and strong taste, • You can shoot and edit from start to finish, • You understand what works on Instagram and TikTok, • You can make great content with a camera or an iPhone, • You bring ideas to the table instead of waiting to be told exactly what to shoot, • You’re reliable, organized, and can turn content around quickly Fashion/apparel experience is great, but creativity, taste, and the ability to execute matter more. Our world is vintage Americana, workwear, Pittsburgh grit, and everyday life. We want someone who can take that direction and run with it. To apply: Send us your portfolio, social accounts or examples of work you've created, availability, and rate. Please don't apply without examples of your content.

Maintain quality standards and adhere to Apex's established design, documentation, and project delivery processes. Software skills with any of the following are a plus: Tekla Structural Designer, Excel, Idea Statica, BlueBeam, RISA Suite, Revit and Ram Connection. Passion for steel and concrete desi

Exposure to the full project lifecycle, from design through Construction Administration (CA). Own each project’s technical delivery end-to-end, ensuring the full set of construction documents is accurate, coordinated, and ready for the contractor. Experience with concrete, steel, masonry, and/or t

If you are looking to start a career that is not only rewarding but also challenging, FCA US LLC, a member of the Stellantis group of companies, is a great place to start. We are looking for employees at FCA's MOPAR Parts Distribution Center ("PDC") in Carrollton, Texas. Join FCA's MOPAR team and become a part of supplying first class performance original equipment parts to local Chrysler, Jeep, Dodge and RAM dealerships. Candidates will only be considered for Carrollton, Texas. Please apply only if you are interested in working in Carrollton, Texas. PDC employees perform a variety of functions. In this role, the selected individual will be responsible for putting parts away, retrieving parts, loading, and unloading cages. Employees in this role may also stand and walk for long periods of time. A normal workday consists of pushing, twisting, and pulling parts, along with reaching and grasping for objects. This is a supplemental role in which hours could range from 0-40 weekly, including overtime, depending on business needs. The starting hourly base pay rate for supplemental employees is $21.00. Eligible Benefits • Medical and Prescription Coverage, • Life Insurance, • Potential for Holiday Pay, • Performance Sharing To be considered, you must be willing and able to do the following with or without reasonable accommodations: • Meet the hourly requirements of the position., • Work different shifts and/or work weekends and holidays., • Work in hot and/or cold environments., • Work around heavy equipment or manufacturing machinery., • Wear safety equipment such as safety glasses, sleeves, earplugs, and steel-toed shoes., • Stand or walk for long periods of time each day., • Frequently bend, stoop, reach and lift to 40 pounds., • Work in tight or enclosed spaces., • Regularly climb up to 40 feet in the air on a ladder/man lift. This is a team-oriented work environment. No previous experience is needed. Relocation is not provided for this position. Basic Qualifications: • You must currently be legally authorized to work in the U.S., • You must currently be at least 18 years of age., • You must currently possess a High School Diploma or GED.