Water department jobs in Buffalo, New YorkCreate job alerts

Job DescriptionDescription: Department: Aquatics Job Status: Seasonal Full Time (Memorial Day – Labor Day) Reports To: General Manager Position: Aquatics Director Work Schedule: Includes evenings, weekends, and holidays as required Salary: $1,360 per week Position Summary The Aquatics Director is responsible for the overall management and operation of the Club’s pool facilities during the summer season. This role oversees all lifeguard staff, ensures the safety and satisfaction of members and guests, and maintains the highest standards of cleanliness, programming, and service at the pool. The Aquatics Director will work collaboratively with other department directors to support children’s programming and special events. Key Responsibilities • Staff Leadership & Management, • Recruit, hire, train, and supervise a team of 12–15 lifeguards., • Create weekly staff schedules and ensure adequate coverage for all operating hours., • Conduct ongoing staff development and performance evaluations., • Facility Operations & Maintenance, • Oversee daily operations of the pool and locker rooms, ensuring cleanliness, safety, and a welcoming environment., • Open and close pool facilities each season, including set-up, inspections, and end-of-season shutdown., • Monitor and maintain proper water chemistry and pool equipment, including chemical treatments, filtration systems, and safety inspections., • Ensure compliance with local health and safety regulations., • Programming & Events, • Organize and oversee swim lessons, swim team practices, and competitive swim meets., • Coordinate with local country clubs to schedule and host swim meets., • Work with members to plan and execute special pool events, including private parties and birthdays., • Collaborate with Racquets and Golf Directors to align aquatics programming with children’s camps, clinics, and club-wide events., • Member & Guest Experience, • Serve as the primary point of contact for pool-related inquiries, concerns, and requests., • Promote a safe, family-friendly, and engaging pool environment., • Ensure that member expectations for service and quality are consistently met or exceeded. Requirements: Qualifications • Previous experience in aquatics management, recreation, or related field required., • Knowledge of pool operations, including chemical treatments and facility maintenance., • Strong leadership, organizational, and communication skills., • Current Lifeguard, CPR, and First Aid certifications required (WSI or CPO certification preferred)., • Ability to work evenings, weekends, and holidays as needed during the summer season.

Job Description You're part of a team of people who get out and do some good in the world. You learn from the best and work with the top minds, technologies, and equipment in the industry while gaining hands-on experience in a wide range of diverse projects. Your growth potential is limitless because you're given the chance to take your skills and career in any direction you choose. You answer the call for help without hesitation, day or night, to uphold our promise to be the only Restoration Partner our clients will ever need - helping Restore, Rebuild, and Rise. You work hard, have fun, and make friends along the way. Your accomplishments are recognized and celebrated as we take pride in our team. You take care of others, and First Onsite takes care of you in return with a competitive compensation and benefits package. QUALIFICATIONS • Valid driver's license, • 100% travel flexibility and on-demand availability required, • Must be willing to work overtime, on weekends, and able to respond 24/7, • Deep sense of teamwork, putting "we" before "me", • Openness and ability to work in environments that may be dirty, cold or wet, and sometimes unsanitary, • Experience/knowledge in water, flood, fire, smoke, mold, and asbestos remediation preferred, IICRC certifications a plus, • Some positions require Restoration or Construction project management experience and knowledge of local, state, and federal code requirements There are multiple opportunities available on our Northeast Traveling Operations team: • Traveling Project Supervisor, • Paid $25-$30/hr based on experience., • Leads onsite teams to the completion of tasks within scope, budget, and schedule while ensuring quality work and safety., • Traveling Assistant Project Manager, • Paid $30-$35/hr based on experience., • Supervises the day-to-day activities of personnel in a workgroup/team while ensuring budgets and profit margins for one or more projects., • Traveling Project Manager, • Paid $85k-$100k salary based on experience plus quarterly commission., • Manages multiple projects simultaneously while ensuring success, efficiency, and profitability through the project life cycle. Level I, II, and III available based on experience, certifications, and qualifications. First Onsite provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. First Onsite (and its Companies) participates in E-Verify. We will provide the U.S. Social Security Administration (SSA) and, if necessary, the U.S. Department of Homeland Security (DHS) with information from each new employer's Form I-9 to confirm work authorization. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Third party resume submissions not accepted. Any resume submitted will be considered the property of THE COMPANY, and THE COMPANY will not be held liable to pay a placement fee. First Onsite provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. First Onsite (and its Companies) participates in E-Verify. We will provide the U.S. Social Security Administration (SSA) and, if necessary, the U.S. Department of Homeland Security (DHS) with information from each new employer's Form I-9 to confirm work authorization. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Third party resume submissions are not accepted. Any resume submitted will be considered the property of THE COMPANY, and THE COMPANY will not be held liable to pay a placement fee. Job Posted by ApplicantPro

Job DescriptionSalary: $20/hr DOE Position Summary: Performs various microbiological sampling and testing in an FDA regulated environment, including personnel and environmental monitoring. Essential Functions: • Perform and review environmental monitoring of ISO5/ISO7/ISO8 manufacturing areas (viable air, viable surface, personnel, and non-viable particulate) as well as inspection for compliance., • Perform and support Media Fill Validations, Engineering Validations and Cleaning Validations., • Accurate/legible completion of records and documents for tests performed, and accurate computer data entry/trending/presentation., • Raw Material/Prefiltration Bioburden/Water sample/Filter integrity testing., • Media check in and growth promotion., • Equipment preparation and autoclaving., • Preparation of microbial ID samples., • Off testing of incubated environmental monitoring media, testing samples, and Media Fills., • Use standard laboratory equipment including but not limited to balance, incubator, autoclave, pipettes, and water bath., • In-process/finished product sample inspection and submission to in-house/third party laboratories., • Stocking/ordering lab supplies., • Assist with revision of microbiology/laboratory procedures and documentation., • Maintenance of close communication and interaction with QC/QA/Production management., • Utilization of programs for daily workflow (e.g. LIMs)., • Utilization of a Quality Management System (QMS) for training and document review/ improvements., • Potential involvement in procedural/policy improvements within the department., • Support microbiology laboratory investigations including NONC/EE/Issue reviews/OOS/OOT/No Tests/CAPA., • Responsible for promoting and maintaining safe and healthy working conditions in his/her assigned work area; instructs and enforces compliance with established safe work practices and procedures; ensures assigned trainees receive appropriate training and information necessary to conduct their activities in a safe and healthy manner., • Responsible for cleaning and upkeep of the laboratory and testing areas., • Support gown assessments as needed., • May perform other duties as qualified/assigned, including but not limited to Sterility , Endotoxin , MET testing, NONC issuance., • Any additional activities as dictated by updates to Standard Operating Procedure and Policies to ensure compliance with cGMP and regulatory bodies. Education and Experience: • A bachelors degree (science related field preferred) or associates degree is preferred., • In lieu of a degree, a high school diploma or equivalent and a minimum of 2 year experience in a regulated environment or Pharmaceuticals may be considered. Knowledge, Skills and Abilities: • Must successfully complete training on aseptic gowning procedures and demonstrate the ability to aseptically gown upon completion., • Accurate/legible completion of records and documents for tests performed, and accurate computer data entry., • Good time management skills, attention to detail, ability to adhere to implemented standard operating procedures/policies, ability to communicate professionally with contract laboratories regarding sample testing, communication with others, and flexibility for new opportunities/tasks., • Works well independently and in a team orientated environment., • Experience in microbiological principles and applications related to microbial ID, validation, or clean room technology., • Experience with standard laboratory equipment including balance, incubator, autoclave, pipettes, or water bath is preferred., • Knowledge of ISO, USP or GMPs standards is a plus., • Knowledge of computer skills (e.g. Windows, Word, Excel, Power Point) Physical Requirements / Working Conditions: • Must have a reliable method of transportation for work travel., • Ability to wear high level full body aseptic gowning with face mask for long periods of time is required., • Ability to stand for long periods of time.

Job Description Civil CAD Drafter – Commercial and Civil Construction – Base Salary to 41.00/hour – Buffalo, NY • Our client is one of the largest privately owned real estate development companies in the US, having been around for over three generations. Their portfolio includes over 1000 properties and 55 million square feet in over 40 states., • Prepare proposed site layout plans for commercial properties, including reviewing municipal code requirements from general information provided including sketches, tax maps and aerials and prepare site plans for existing properties utilizing as-built surveys, aerial mapping and municipal GIS data., • Prepare detailed engineering site plans for use by construction department in preparing cost estimates; Prepare detailed engineering plans for minor projects., • Prepare colored presentation plans for use by the management team in presenting projects, including issues of permitting and town codes for site design. Assist in resolving issues with construction issues such as surveying, engineering, and environmental issues., • Update tenant information on site plans. Maximize square footage on site drawings based on information provided by right to build, design, and leasing team., • Analyze various design requirements including landscape buffers, building setbacks and recommend possible solutions or alternate construction., • Make changes for all site plan revisions at the request of leasing, construction personnel and executives. Review aerial or site drawings, and prepare site plans for retail, commercial, and industrial build., • Perform field visits to evaluate sites for conceptual planning., • Evaluate zoning, and environmental code requirements with RTB department to ensure adherence to codes and regulations., • 1+ years' experience in preparing site plans and engineering drawings for commercial/retail buildings., • 2-year degree preferred., • Experience in AutoCAD 2024 required and experience in AutoCAD Civil 3D and Adobe Photoshop preferred., • Excellent interpersonal and communication skills., • Base salary to 41.00/hour, • OT pay., • Med/Dental/Vision/Health Ins., • PTO., • Retirement Plan. #INDALL

Job Description Join a team that nourishes life from farm to table! Upstate Niagara Cooperative, proudly owned by 200+ local family farms, is one of America’s largest and most stable dairy cooperatives. Guided by farmer- and employee-led values, we process and market high-quality milk, yogurt, dips, sour cream, cottage cheese, and more under our trusted brands: Upstate Farms®, Bison®, Milk for Life®, and Intense Milk®. Here, you’ll support sustainable farming, strong communities, and the mission to deliver fresh, local dairy to families every day. The Environmental, Health and Safety (EHS) Manager leads the development, implementation, and continuous improvement of the EHS programs at our fluid dairy manufacturing facility. This role is responsible for ensuring full regulatory compliance with occupational health, safety, and environmental laws while cultivating a strong, proactive safety culture and driving sustainability initiatives. The EHS Manager partners with plant leadership, operations, maintenance, and quality teams to ensure safe, clean, and compliant operations. Key Responsibilities: Health & Safety: • Oversee site compliance with OSHA standards, industry best practices and meet organizational goals for overseeing the Safety Management Operating System (SMOS), • Conduct incident investigations and lead root cause analysis and corrective action implementation, • Provide site-specific safety training and development across all teams, • Involvement in daily huddle meetings to provide a safety department presence and message, • Develop individual- and plant-focused SMART goals from high-level initiatives, • Daily walkthroughs to ensure boots on the ground with a focus on behavior and adherence to safe work practices, • Engaging with personnel to promote worker participation in proactive safety, • Review and prioritize Open Action Items and update status, • Review and follow up of near misses and hazard recognition in the facility, • Review weekly Supervisor Audits and ensure that follow-up actions are added to the Action List in Teams and addressed, • Oversee and facilitate the implementation of safety programs and procedures, • New Employee Safety Orientations, • Implement the health and safety program requirements at the facility, • Assisting with the development of Lockout/Tagout procedures, • Perform proactive safety functions, • Audit completion of the required safety documentation like pre-shift inspections on PITs, • Develop Job Hazard Analysis (JHA) for plant operations, • Develop One Point Lessons as necessary, • Oversee Monthly Safety Committee Meeting, • Ensure that OSHA 300 log is current and properly maintained, • Identify and Implement Weekly Toolbox Topics, • Perform and document Monthly Safety Manager Compliance Tasks, • Ensure facility compliance with all applicable environmental laws and regulations (EPA, Clean Water Act, Clean Air Act, RCRA, etc.)., • Manage environmental permits including air, wastewater, stormwater, and waste management., • Conduct routine site inspections, environmental audits, and risk assessments., • Develop, implement, and monitor environmental programs including spill prevention, waste reduction, and recycling initiatives., • Prepare and submit regulatory reports (e.g., Tier II, TRI, DMRs, annual emissions inventory)., • Liaise with local and federal environmental agencies as needed., • Serve as the site’s environmental subject matter expert during inspections and audits., • Maintain accurate records of all environmental documentation, permits, and compliance activities., • Collaborate with operations, maintenance, and engineering teams to incorporate environmentally sound practices in day-to-day operations., • Lead environmental incident investigations and root cause analysis., • Develop and deliver environmental compliance training to plant personnel. Work within a union environment among a cross-disciplinary population. Must be able to work individually and in a team setting. Organize and manage time and competing priorities. Flexibility to train and meet with staff overnight or afternoon shifts. On-call 24/7/365 with duties shared among coworkers. The team includes technical and administrative managers, engineers, trade professionals, administrators, financial professionals, and laboratory scientists. The above requirements represent the knowledge, skill, and ability required. Reasonable accommodations are available to enable individuals with disabilities to perform essential functions. Education and experience: • A BS degree in Safety Engineering, Industrial Hygiene, Sciences, Business, Health or in a related field. MS in EHS or an MBA degree is preferred., • Five plus years’ experience in manufacturing or industrial setting preferred, • Deep understanding of legal health and safety guidelines, • Understanding of environmental regulations and good practices, • Ability to produce reports and develop/manage relevant policies, • Good knowledge of data analysis and risk assessment, • Excellent organizational and motivational skills, • Outstanding attention to detail and observation ability, • Exceptional communication and interpersonal abilities, • Familiar with standard concepts, practices, and procedures within the health, safety, and environmental field., • Collaborative problem solver who understands the complexities of a manufacturing environment, • Certified Hazardous Materials Manager (CHMM), • Certified Environmental Manager (CEM) The EH&S Manager may be exposed to and entrusted with confidential information relative to production methods, customers, and company strategy. Management Responsibility: The EH&S Manager is a support function role that operates under the general direction of the Senior Director of EHS & PSM Compliance. Work Environment The EH&S Manager will support all facets of EHS at the facility including the plant and office environment. Must be capable of operating standard office equipment and seeing, grasping hold, walking, climbing, bending, stretching, and lifting up to 40 lbs. At times immersed in the plant production environment working near moving mechanical parts, corrosive chemicals, high-speed conveyors, and processing equipment where temperatures fluctuate, floors may be wet, and noise is a constant factor. Pay: $75k-$95k/yr.* *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position’s qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job Description COMFORT SHOWERS & BATHS, a division of COMFORT WINDOWS, is seeking a dependable and experienced Licensed Plumber to join our Tonawanda, NY location, providing residential plumbing work. This position involves working together with our installation crews on a variety of hands-on tasks in homes throughout the area, with a focus on quality workmanship and excellent customer service. Responsibilities: • The position will primarily work with our bathroom remodeling department. You will be responsible for installation, repair, and movement, including water supply lines, drainage systems, fixtures, and appliances., • Diagnose and troubleshoot any plumbing issues during the installation, providing effective and lasting solutions., • Interpret blueprints, building codes, and technical diagrams to determine the layout of plumbing systems., • Work directly with Comfort Crew Lead in addressing homeowners to explain work and ensure customer satisfaction., • Inspect completed work to ensure compliance with safety and code standards., • Maintain accurate records of work performed and materials used., • Keep job sites clean and organized, and adhere to all safety protocols. Requirements: • Valid plumbing license, • Minimum of 2 years of experience in residential plumbing preferred, • Strong diagnostic and problem-solving skills, • Excellent communication and customer service skills, • A valid NYS driver's license At Comfort Showers & Baths we offer: • Full-time, year-round work, • Industry competitive pay rates based on experience, including 1.5x overtime pay, • Annual pay increases, • Health, dental, and vision coverage plans, • FREE $10,000 life insurance policy, • 401K plan with a dollar-for-dollar company match up to 4%, • Generous number of paid days off for holidays, vacation, and sick time DON'T WAIT...APPLY NOW! Comfort Showers & Baths/Comfort Windows is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.

Job Description Job Title: Vehicle and Ground Attendant/Porter Department: Service and Sales Reports To: Service Manager/Detail Manager/Sales Manager FLSA Status: Non-Exempt Summary Maintains a safe, clean working environment for all dealership employees and customers. Moves and cleans vehicles, keeps the vehicles in sound working condition, and helps managers as requested. Essential Duties Essential Duties include the following. Other duties may be assigned. Uses good judgment and safe driving skills Maintains a professional appearance. • New Vehicle Check in, • New and Used Vehicles, • Client Care Inspects vehicles to detect damage and to verify the presence of accessories listed on the invoice. Records the description of damages and lists missing items on the delivery receipt. Parks new vehicles in assigned areas. Delivers keys, books and any required accessories to office personnel for stocking Places stock tags in vehicles Catalogs and stores keys Keeps vehicle lots neat and orderly, moving cars as directed by the sales manager and in accordance with dealership display standards. Cleans interior and exterior of vehicles, including the trunk, glove compartment, tires, windows, etc. as needed. Picks up vehicles from and delivers vehicles to customers as directed by management. Starts vehicles daily and reports any problems or concerns. Evaluates cleanliness and fuel needs daily and addresses any problems or concerns. Ensures that required forms/stickers have been completed and are properly displayed. Maintains proper battery log on all new vehicles. Moves sold vehicles to maximize use of space and keep the lot in order. Delivers sold vehicles to the new-vehicle preparation department. Makes sure showroom and delivery bay are free of clutter, and refrigerators kept stocked with water. Drives vehicles to and from service lane, service stalls, wash bay and parking lot as needed. Washes and cleans customer and dealership vehicles Valets and assists clients into their vehicles as requested with a friendly demeanor and smile Installs license plates and frames when requested by sales department Cleans the service and customer areas Performs routine building maintenance in such a manner as to minimize interruption of customers or employees. Wash all windows, glass doors and glass panels throughout the service area. Mops and cleans service waiting area, offices, technicians' locker room and lunchroom, halls, and shop bathroom. Sweeps technician stalls, service department and body shop floors, showroom, halls, and vending areas. Cleans all signs, posters, service signs, mirrors, fans, and vending machines. Removes all debris from lot. Maintains yard equipment and cleaning supplies. Assists technicians with oil and water spills and with emptying drain tubs. Mows lawn, trims shrubbery, and cultivates flowers. Waters flower beds and removes debris. Runs errands as directed by foreman. Understands and complies with OSHA Right-to-Know and other federal, state, and local regulations. Uses proper eye, hand, and body protection when using products that require protection. Marginal Duties Assists transportation department when needed. Other duties may be assigned. Supervisory Responsibilities – None Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Valid Driver’s license and acceptance by the dealership’s Insurance Company as required., • Must pass pre-employment drug test., • Team oriented and works well with fellow coworkers., • Attention to detail, excellent organizational and time management skills. Job Type: Part-Time Schedule: Some weekdays and Saturdays. Some full day shifts, morning shifts and afternoon shifts. Pay: Hourly $16 to $18 per hour based on prior experience.

Job Description Mechanical/Electrical Assembler – 1st Shift (7:00 AM–4:00 PM) Location: Buffalo, NY (On-Site) Department: GTI Energy – Manufacturing Employment Type: Full-Time | Non-Exempt About GTI Fabrication GTI Fabrication is a leader in industrial manufacturing, modular construction, metal fabrication, and container-based structures. We engineer and assemble modular energy storage enclosures, electrical control houses, steel structures, and containerized systems for the defense, military, commercial, and energy industries. Our Phoenix facility specializes in mechanical assembly, electrical integration, HVAC installation, industrial wiring, and fabrication work. The Mechanical/Electrical Assembler plays a critical role in building and integrating components into these modular systems. Position Overview The Mechanical/Electrical Assembler performs hands-on assembly, wiring, installation, and integration of mechanical, electrical, and HVAC components into modular industrial enclosures. This role is ideal for candidates with experience in mechanical assembly, electrical assembly, HVAC installation, construction labor, or industrial production assembly. This is a 1st shift position: Monday–Friday, 7:00 AM–4:00 PM. Key ResponsibilitiesComponent & System Assembly • Assemble and integrate mechanical, electrical, and structural components into modular energy storage enclosures, • Cut, drill, mount, and fasten mechanical components, structural parts, brackets, ducts, and hardware, • Run conduit, pull wire, route cables, terminate connections, and mount electrical devices, • Use multimeters and diagnostic tools to test circuits and verify electrical continuity, • Safely operate drills, impacts, grinders, saws, and various assembly tools, • Experience as a Mechanical/Electrical Assembler, Mechanical Assembler, Electrical Assembler, HVAC Installer, or Industrial Assembler, • Ability to read and follow blueprints, wiring diagrams, and mechanical drawings, • Skilled with hand tools and power tools (drills, impacts, grinders, saws, etc.), • Experience with basic electrical tasks and multimeter use (preferred), • Ability to lift 50 lbs and work in a manufacturing environment, • Strong attention to detail and commitment to safety, • Experience with modular assembly, energy storage enclosures, container-based construction, or industrial fabrication, • Mechanical assembly in a production or fabrication environment, • Basic HVAC installation experience, • OSHA training or industrial safety experience Why Join GTI? • 1st shift schedule — 7:00 AM–4:00 PM, • Competitive pay and benefits, • Fast-growing manufacturing environment, • Work with cutting-edge modular energy and industrial systems Job Type: Full-time Pay: $20.00 - $23.00 per hour Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off Company DescriptionGTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.

Job Description Job Title: Mechanical/Electrical Assembler – Modular Manufacturing Location: Buffalo, NY (On-Site) Department: GTI Energy – Manufacturing Employment Type: Full-Time | Non-Exempt About GTI Fabrication GTI Fabrication is a leader in industrial manufacturing, modular construction, and metal fabrication, specializing in the design and assembly of modular structures, energy storage enclosures, and shipping container-based systems. We support industries including defense, military, energy storage, disaster relief, and commercial construction. Our team includes welders, electricians, assemblers, HVAC technicians, fabricators, and engineering professionals working together to build high-quality, mission-critical modular solutions. This Mechanical/Electrical Assembler role is based at our GTI Energy manufacturing facility in Buffalo, NY. Position Overview As a Mechanical/Electrical Assembler, you will support the assembly, installation, and integration of mechanical, electrical, and HVAC components into energy storage enclosures and modular industrial structures. This role is ideal for individuals with experience in mechanical assembly, electrical assembly, HVAC installation, construction labor, or general industrial assembly. Key Responsibilities 1. Component & System Assembly • The Mechanical/Electrical Assembler will assemble, install, and integrate mechanical, electrical, and structural components into energy storage enclosures and modular units., • Follow assembly drawings, blueprints, schematics, and written work instructions. 2. Mechanical Assembly • Perform hands-on tasks: cutting, drilling, mounting, bolting, fastening, and structural integration., • Install mechanical components, hardware, ducting, frames, and industrial parts. 3. Electrical Assembly & Wiring • A Mechanical/Electrical Assembler will assist with running conduit, pulling wire, cable routing, and installing electrical components., • Use multimeters, meters, and diagnostic tools to test and troubleshoot circuits., • Perform basic electrical installation, maintenance, and repairs (as qualified). 4. HVAC Installation • Install HVAC units, ducting, vents, and climate control systems for modular enclosures. 5. Blueprint Interpretation • Read and follow simple blueprints, diagrams, and assembly drawings to ensure accurate integration. 6. Power Tools & Equipment • Operate drills, saws, grinders, impacts, and other power tools safely., • Experience as a Mechanical/Electrical Assembler, construction laborer, mechanical assembler, electrical assembler, HVAC installer, or industrial assembler., • Proficiency with power tools, tape measures, hand tools, and diagnostic equipment., • Ability to read and interpret basic blueprints and diagrams., • Experience with electrical tasks (conduit, wiring, testing) or HVAC installation (preferred)., • Ability to lift 50 lbs+, stand for long periods, and work in an industrial manufacturing environment., • Modular construction, containerized structures, or energy storage system assembly., • Mechanical, electrical, HVAC, or fabrication background., • Fast-growing industrial manufacturing environment., • Hands-on exposure to modular construction, energy storage systems, and electrical integration. Job Type: Full-time Benefits: • 401(k), • Dental insurance, • Employee assistance program, • Health insurance, • Health savings account, • Life insurance, • Paid sick time, • Paid time off, • Vision insurance Work Location: In person Company DescriptionGTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.

Job Description Safetec of America, Inc. is your trusted source for infection control, first aid, and compliance products for over 30 years. We are a fast-growing OTC pharmaceutical company located in Buffalo, NY. We are a family-owned, local business with a reputation for retaining employees because we treat them like family. We are looking for a dedicated individual to coordinate the building and facilities maintenance for our 3 buildings. Work for a diverse company that is a WNY Best Place to Work and is recognized for excellence in manufacturing! Responsibilities: • Manage and understand auxiliary equipment such as water systems, air compressors, etc., • Work with outside vendors related to: Alarms, Signage, Trash Removal, Landscaping, Plowing, etc., • Work closely with all other departments and department heads to ensure plant facility maintenance needs are met, • Coordinate with staff and outside vendors to ensure repairs and maintenance are completed in a timely and satisfactory manner, • Performs light cleaning, repairing, maintaining, constructing, renovating, and demolishing building systems as needed, • Provides oversight of all exterior and interior property conditions for 3 facilities in Buffalo, NY, • Performs regulatory building audits and inspections, maintains reports and tracking systems to provide a safe and healthy environment for all visitors and employees, • 2+ years of experience in a manufacturing environment; pharmaceuticals a plus, • 2 years of experience with air compressors, HVAC, sprinkler systems, and electrical systems, a plus, • FDA/cGMP knowledge is a plus, • Valid Driver's License required, • Basic tools provided, • Ability to work independently and in a team environment

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Bonus based on performance, • Dental insurance, • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development Duties and Responsibilities include the following: • Directs and controls the daily operations to ensure the school is running according to GSS standard operating procedures., • Helps the General Manager and department managers fulfill all daily tasks., • Manages the staff of GSS to ensure high productivity, excellent performance and positive employee satisfaction., • Oversees employee engagement to maintain a high level of employee satisfaction and company culture., • Oversee training and development of the aquatics department to provide superior swim instruction in accordance with GSS standards., • Interacts with all wet side staff on operational items including class scheduling, student progress, and customer experience., • Able to maintain and troubleshoot proper pool chemistry and pump room operation., • Gains a high level of knowledge and experience in the GSS pool operations necessary to maintain a safe and sanitary swim environment., • Completes evaluations on all teachers and conducts an assessment on all trainees prior to teaching independently., • Directs, trains, maintains and oversees the implementation of the Emergency Action Plan and all safety procedures that pertain to the GSS facility and EAP., • Interacts with the team members on issues related to class scheduling, student progress, customer service and employee performance and training., • Provides sales and marketing training to all qualified sales staff. Works with the Marketing Manager to ensure high levels of customer service and sales performance., • Provides direction in the retail and vending departments to ensure a proper mix of products and pricing is achieved. Assist GM with purchasing., • Trains and oversees private party staff to ensure that the GSS standard operating procedures are being maintained., • Work with GM and Marketing Manager to manage social media, book water safety presentations and events, and build partnerships with local, like-minded businesses., • Oversee monitoring of email, voice messages, and social media to ensure timely and appropriate responses., • Gains knowledge and experience in all technology platforms to achieve a high level of competence in bookings, class scheduling, reporting and administrative functions., • Gains a high level of knowledge of GSS pool operations to ensure understanding and ability to train front desk staff to sell the program and respond to customer concerns., • Initiates and oversees workplace culture and employee interaction. Maintain a high level of employee satisfaction., • Directs and oversees the implementation of the Emergency Action Plan and all safety procedures that pertain to the GSS facility and trains all current staff on the GSS EAP. Certificates and Licenses: Certified Pool Operator and Lifeguard Instructor certifications required. Both certifications must stay up-to-date and current. Work Environment: While performing this job, the employee is regularly exposed to heat and humidity. Noise level is usually moderate. Job Type: Full-time

Job Description The Project Manager’s responsibilities will include successfully managing projects from start to finish by ensuring all submittals, procedures, specifications, QA documents and schedules are followed per the contract documents. They will ensure all drawings are 100% accurate prior to any drawing submittals to our customers. They will also go over all final drawings, prior to start of fabrication, to ensure that there are no errors, and that the practicality of the drawings are such as to ensure a successful build in the shop. ESSENTIAL FUNCTIONS · Strong drawing comprehension. · Examines engineering drawings of water control gates & hoists, assemblies, and fabrications to detect errors in design documents: Compares figures and lines on production drawing or diagram with production layout, examining angles, dimensions, bend allowances, and tolerances for accuracy. · Determines practicality of design, material selection, available tooling, and fabrication process, applying knowledge of drafting and manufacturing methods. · Reviews customer specifications and drawings to ensure project adherence and acceptance. · Compiles, reviews, and submits customer submittal packages as required by the projects. · Works with engineering, quality & fabrication personnel to submit and resolve RFI’s. · Confers with design personnel to resolve drawing and design discrepancies. · Specialize in checking specific types of designs, such as mechanical assemblies. · Study and review product pricing and change or modify pricing with the current trends. · Create and maintain customer and production schedules. · Be the point of contact for assigned projects with Linita’s customers. · Assist Chief Operating Officer and Plant Manager in resolving customer problems, complaints, etc. · Liaise between shop, foreman, quality department and engineering to resolve project issues. · Perform other duties as may be required by the Chief Operating Officer of Linita. · Meet Linita’s budgets and schedules as required. · Always maintain a high degree of customer satisfaction. · Prioritize purchasing based upon lead times and project schedule requirements. · Reliability and Attendance – begin work on time and conform to work hours and schedule. · Work overtime when required to meet schedules and deadlines. · Assist engineers with bidding process (pricing materials, machining, and transportation). OTHER JOB DUTIES Other duties and/or projects as assigned by a member of the Management Team. REQUIREMENTS/QUALIFICATIONS Technical Skills · Minimum of 5 years’ experience in Project Management/Detailing/Drafting in the steel fabrication industry. · Knowledge of: o Drafting practices. o Fabrication and manufacturing practices, including methods of cutting, forming, and machining. · Some proficiency in 2D Auto-cad. · Associates Degree in drafting preferred. · Strong verbal and written communication skills. · Able to use Microsoft Office Outlook, Excel, and Word. Personal Characteristics · Meticulous, methodical, high attention to detail, and extremely organized. · Goal Oriented. · Able to work in a multitasking environment of a small company and maintain self-motivation. · Positive and open-minded approach to problem solving. · Able to manage multiple projects, respond to rapid change, and organize, prioritize, and perform work with minimal supervision. · Able to work independently as well as in a team environment. EXPERIENCE Five to 10 years of experience in complex steel fabrication products required Company DescriptionLinita Design & Manufacturing specializes in the manufacturing of Water Control Equipment such Intake Gates, Bulkhead Gates, Stoplogs, Trashracks. Cranes, Hoists, etc. We are also a heavy custom fabrication shop.Linita Design & Manufacturing specializes in the manufacturing of Water Control Equipment such Intake Gates, Bulkhead Gates, Stoplogs, Trashracks. Cranes, Hoists, etc. We are also a heavy custom fabrication shop.

Job Description Preferred Hybrid Work Locations: Williamsville, NY Rochester, NY Syracuse, NY Albany, NY Water Department Manager Join an innovative, multidisciplinary architecture, engineering, energy efficiency, and construction management firm that partners with both private and public organizations to deliver high-performing facilities and infrastructure. This is an opportunity to play a pivotal leadership role in shaping the future of water treatment engineering within a collaborative, forward-thinking environment. About the Role The firm is seeking an experienced Department/Program Manager to lead the Water Treatment Engineering Resource Group. Based in the Williamsville, NY headquarters (or one of the additional New York State offices), this leader will drive excellence across project delivery, technical quality, team performance, and strategic growth. This role sits at the intersection of technical innovation and organizational leadership. You will guide a talented team of engineers, coordinate with water/wastewater division leaders, and ensure the successful execution of complex treatment and storage projects. Key ResponsibilitiesTechnical Leadership * Serve as a technical lead for medium- to large-scale planning, design, and construction projects related to water treatment and storage systems. * Evaluate, diagnose, and implement water treatment process improvements to enhance system performance. * Optimize plant operations across pretreatment, filtration, disinfection, residuals management, energy systems, and storage. * Conduct asset evaluations and support long-term capital planning initiatives. * Perform hydraulic modeling for treatment processes and storage systems. * Provide specialized water expertise to support utility operations during critical or time-sensitive situations. Team & Project Management * Lead, mentor, and develop a team of 510 engineers within the Water Treatment Engineering Resource Group. * Manage team scheduling, resource allocation, deadlines, and quality assurance standards. * Oversee staff training, technical development, coaching, and performance management. * Act as a liaison between technical teams and senior leadership to ensure alignment with organizational goals and project objectives. Client & Business Development * Build and maintain trusted advisor relationships with established water-sector clients. * Support business development efforts by contributing to pursuit strategies and securing new opportunities. * Represent the Water Group within the broader organization, supporting strategic initiatives and cross-disciplinary collaboration. Qualifications * Bachelors degree in Civil, Chemical, Environmental Engineering, or a related discipline. * Current Professional Engineer (PE) license required. * 10+ years of experience in water treatment engineering. * Proficiency in MS Office; working knowledge of CAD/Revit or similar tools. * Valid drivers license and ability to travel to job sites and client meetings (including occasional overnight travel). * Demonstrated leadership capabilities with prior experience managing, mentoring, and developing engineering staff. * Ability to work independently and manage multiple priorities with minimal supervision. What Youll GainWork-Life Balance * Hybrid work options * Flexible scheduling Comprehensive Benefits * Medical, dental, and vision coverage * 401(k) with company match * Paid Time Off (PTO) * Life insurance * HSA and FSA options Career Growth & Support * Career and professional development programs * Tuition reimbursement * Parking reimbursement * Wellness programs and health stipend This is a rare opportunity to influence the direction of a growing water engineering program while contributing to impactful, community-focused infrastructure projects. If you're a motivated leader ready to elevate your career, this position offers the platform, resources, and team to make it happen.

Job DescriptionJob Title: Water Treatment Department ManagerLocation: Buffalo, NYHire Type: Direct HirePay Range: $120,000 – $180,000Work Model: Hybrid (with required travel to job sites and client meetings; occasional overnight Recruiter Contact: Samantha Marranca | 716-256-1271 | & Scope:Positional OverviewThe Water Treatment Department Manager will oversee the water treatment engineering group and provide leadership in coordinating project teams, managing utilization, and mentoring staff. This individual will also serve as a technical lead on medium to large-scale projects involving water treatment and storage systems. The role requires balancing management responsibilities with direct client interaction and engineering leadership.Role & Responsibility:Tasks That Will Lead To Your Success • Serve as a trusted advisor to established water clients and assist in developing new project opportunities., • Coordinate project scheduling, team commitments, and deadlines across the department., • Lead and mentor a team of 5–10 engineers, providing technical training and coaching., • Optimize treatment plant operations, including pretreatment, filtration, chemical disinfection, residuals, energy systems, and water storage., • Perform asset evaluation and long-term capital planning., • Conduct hydraulic modeling of treatment system processes and storage systems., • Provide technical expertise to utility staff in critical operational situations., • Represent the Water Treatment Engineering team to corporate management and stakeholders. Skills & ExperienceQualifications That Will Help You Thrive, • Bachelor of Science in Civil, Chemical, Environmental Engineering, or related field (required)., • Professional Engineer (PE) license (required)., • 10+ years of experience in the water treatment discipline., • Proficiency with MS Office; familiarity with CAD/Revit preferred., • Strong leadership, management, and mentoring experience., • Valid driver’s license and ability to travel., • Ability to work independently with minimal supervision.