Wiring jobs in Piscataway, NJCreate job alerts

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Diesel Technician to support our Truck Fleet in Edison, NJ For More Info Call Jason or Text "Edison 4" to 830-383-4767 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $40.00 - $44.00 per hour based on experience, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided For More Info Call Jason or Text "Edison 4" to 830-383-4767 At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Four (4) years or more Relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Four (4) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Decision making: Responsible for making decisions surrounding vehicle diagnostics and repair, • Performs vehicle maintenance and repair duties including: standard vehicle maintenance, preventive maintenance, complex repairs with minimal (if any) support, • Demonstrate the ability to access and use internal and external maintenance documents - Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable, • Performs remote triage to with RCRC and customers to determine best solution to assist roadside breakdowns, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task, • Instructs and advises other technicians regarding maintenance repair procedures and diagnostics, • Interact with non-contractual customers, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements. Posted Date 2 days ago (8/27/2025 5:32 PM) Requisition ID 2025-187155 Location (Posting Location) : State/Province NJ Location (Posting Location) : City EDISON Location (Posting Location) : Postal Code 08817 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001374 Min Pay USD $40.00/Hr. Max Pay USD $44.00/Hr.

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Auto and Diesel Technician to support our Truck Fleet in Edison, NJ For More Info Call Jason or Text "MS3" to 830-383-4767 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $36.00 - $40.00 per hour based on experience, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided For More Info Call Jason or Text "MS3" to 830-383-4767 At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Three (3) years or more relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 2 days ago (8/27/2025 12:01 PM) Requisition ID 2025-187121 Location (Posting Location) : State/Province NJ Location (Posting Location) : City EDISON Location (Posting Location) : Postal Code 08817 Category Technicians/Service Employees9 Additional Locations (use this field to indicate if position can be domiciled in several areas) US-NJ-NEWARK | US-NJ-JERSEY CITY | US-NJ-ELIZABETH | US-NJ-PERTH AMBOY Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001311 Min Pay USD $36.00/Hr. Max Pay USD $40.00/Hr.

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Auto and Diesel Technician to support our Truck Fleet in Edison, NJ For More Info Call Jason or Text "MS3" to 830-383-4767 Hear it from a Torque Mobile Mechanic Technician Here: • Technician Positions Pay Each Week, • Hourly Pay: $36.00 - $40.00 per hour based on experience, • Ability to earn additional monthly performance incentive, • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided For More Info Call Jason or Text "MS3" to 830-383-4767 At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development Click Here to See All Ryder Careers: EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Three (3) years or more relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Posted Date 1 month ago (7/23/2025 4:46 PM) Requisition ID 2025-185110 Location (Posting Location) : State/Province NJ Location (Posting Location) : City EDISON Location (Posting Location) : Postal Code 08817 Category Technicians/Service Employees9 Additional Locations (use this field to indicate if position can be domiciled in several areas) US-NJ-NEWARK | US-NJ-JERSEY CITY | US-NJ-ELIZABETH | US-NJ-PERTH AMBOY Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001311 Min Pay USD $36.00/Hr. Max Pay USD $40.00/Hr.

Job DescriptionBenefits: • Competitive salary, • Free uniforms, • Paid time off We are looking for a skilled and experienced technician to join our team! HVAC/R Technicians install, maintain, repair and overhaul various types of equipment, including refrigeration systems, heating and cooling systems, and commercial kitchen equipment. A team player who is comfortable working independently, loves the feeling of a job well done, and takes pride in completing customer jobs with efficiency. A positive attitude is a must! Responsibilities: • Perform preventative maintenance, corrective maintenance and installation of refrigeration, heating, air conditioning, and ventilation and plumbing applications., • Install, maintain, and repair package units, split systems, boilers and other mechanical equipment., • Install, repair, and maintain light commercial rooftop units, boilers, controls, and other mechanical equipment., • Maintain all ventilation systems including preventative maintenance tasks and rebuilding of equipment when need., • Perform repairs and installation on HVAC/R equipment and commercial kitchen equipment for residential and commercial customers., • Perform maintenance and repair of HVAC/R equipment for commercial and residential applications including commercial refrigeration equipment., • Demonstrate strong knowledge of refrigeration systems, walk in refrigeration/freezer units and some experience on centrifugal and rotary screw compressor chillers., • Validate laboratory air flows to meet OSHA safety requirements., • Conduct a wide range of repairs in accord with OSHA regulations., • Plumb and connect all necessary PVC piping to drain condensation from the evaporative coil., • solder, pipe-fitting, blue print reading, climbing ladders, digging ditches, preparing pipes and fittings, cleaning, • Work on motor controls, pneumatic controls, chillers, high pressure steam, pumps, valves, piping, etc., • Service residential and commercial plumbing equipment., • Perform minor electrical and plumbing repairs., • Past experience as an HVAC service technician, • Refrigeration experience, • Valid Drivers License, • EPA Certification, • Experience with operation and maintenance of chillers, heat pumps, air handlers, and geothermal systems, • Ability to climb ladders, crawl, and lift 40 pounds, • Ability to work after hours, over weekends and on public holidays with short or no notice, • Ability to work in confined spaces, • Excellent written, verbal and interpersonal skills, • Reliable mode of transportation

Job Description South Amboy, NJ - Hourly Rate $30.00 - $48.00hr Job Brief Critical thinker and self-starter, willing to go the extra mile and stay committed to educating themselves in our constantly changing field. Candidates should have extensive experience with installing, inspecting, and repairing of heating, cooling, ventilation, and refrigeration systems. Candidates should also be comfortable working with little to no supervision and possess a strong work ethic and team mindset Responsibilities • Travel to customer locations, often multiple daily, as scheduled, • Inspect existing HVAC systems for effectiveness and safety, perform consultations with customers to determine needs and discuss all solution methods, • Install, inspect, troubleshoot and repair HVACR equipment to ensure proper HVAC and/or refrigeration operation in accordance with established procedures and according to code., • Conduct performance tests with specialized tools, • Perform preventative maintenance on HVAC systems to increase longevity, • Explain the benefits and assist in the selling of maintenance contracts to new customers and assure renewal of ongoing maintenance contracts with existing customer base, • Maintain accurate inventory of all equipment and HVAC resources, • Perform other duties as required to maintain equipment and follow all company and customer safety policies and procedures., • Maintain all site locations for safety and cleanliness before, during and after services are provided. Requirements • 3-5 years apprenticeship under a journeyperson preferred, • Certification through the Environmental Protection Agency to handle refrigerants required, • Technical high school certification and/or associate degree from an accredited HVAC program required, • Knowledge of hand-cutting tools, electric saws, and electrical and gas equipment., • Knowledge of refrigeration principles,ability to effectively troubleshoot and diagnose refrigeration issues., • Current driver's license for operating motor vehicles in the state of New Jersey, • Must be available for 24-Hour Emergency On-Call Service, once a month (Additional Pay + Overtime), • Must have strong troubleshooting skills with the ability to think outside of the box and experience and understanding of commercial HVAC/R including, Split Systems, Package Units, Ductless Systems, Heat Pumps, Cooling Towers, Boilers, PTAC units, VAV's, etc.,, • Chiller (experience a plus), • Refrigeration (experience a plus), • Controls troubleshooting (Distech a plus), • Must have knowledge and capability to complete repairs on compressors, condensers, evaporator motors, piping, control wiring etc. HVAC Technician and EPA Certified

Job Description Job Description Job Title: Controls Technician/ Electrician Company Information Our company was established in 1984 as an HVAC service company. We have grown into one of the largest mechanical contractors in NJ servicing large commercial and industrial buildings consisting of chiller plants, built-up penthouses and large HVAC equipment. We believe all customer interactions should be executed with the highest level of professionalism, excellence and competency at all levels of the organization. Minimum Requirements Experienced controls technician with a minimum of 5 years experience with a strong background in installation, commissioning, troubleshooting, repairing and maintaining building automation control systems and devices. Applicant must be able to follow wiring diagrams and engineering specifications to install and troubleshoot. Responsibilities: • Low voltage wiring, installation, termination of building automation controllers and end-devices., • Testing, commissioning and calibration of sensors, valves, dampers, etc., • Troubleshooting and programming of VFD’s., • Programming of application specific controls such as VAV boxes and fan coils., • Installation of MSTP and IP networks., • Be part of the on-call rotation, • Tridium Jace, • Johnson FX, • BACnet IP, MSTP networks, • RTU, Chiller Plants, Boilers VAV boxes sequence of operations, • Valid drivers license, • HVAC building automation knowledge, • Must be able to perform the physical requirement of the job, • Basic computer skills of Excel, Word, and Outlook., • Five years experience with the installation and troubleshooting of building automations systems, • Communication skills (oral and writing), • Able to read wiring diagrams and engineers drawings, • Able to work in a fast-paced environment, • Able to multi-task and focus amid distractions, • Good listener and a team player, • Detail oriented, • Organized, flexible and follow directions, • Able to work overtime when needed

Job Description Stark Tech is actively looking for HVAC Service Technician in Brick Township, NJ! How do you excel in this position The Service Technician reports to the Service Manager and is an hourly, full-time position. This position will ensure all customer requests are identified and addressed in a prompt, accurate, and professional manner with safety with the end customer always top of mind. What are we looking for • High School Diploma or equivalent and 2-5 years of experience in HVAC, or the equivalent combination of education (technical school) and experience., • Must follow union qualification process for Journeyman standing., • Knowledge in all facets of the HVAC industry, including but not limited to Air Conditioning, Heating, Electrical, Boilers, Humidification, Dehumidification, and Refrigeration., • Must have universal EPA CFC certification., • Must have 10-hour OSHA certification., • Must be a highly motivated and an independent thinker., • Must be able to thrive in a fast-paced, high profile (often mission critical) customer setting. Ability to multi-task, work under pressure and meet deadlines required., • Knowledge of HVAC&R theory, solid mechanical, electrical troubleshooting, and repair skills required., • Ability to read wiring diagrams, mechanical layouts and blueprints required., • Must have experience installing clean, dry refrigeration piping systems and associated practices., • Operating knowledge of Microsoft office software and working proficiency with handheld devices, such as Smartphones, iPads, etc. Jersey State Controls is now part of Stark Tech! Stark Tech's Building Solutions group delivers actionable insights through building analytics and automation technology. Our solutions reduce waste, improve efficiency, and improve the bottom line. Stark Tech's Building Solutions group specializes in Building Controls and Automation, Energy and Power Management, Protective Systems and Customized Service Solutions. Stark Tech's in-depth understanding of building operations combines technology with real-world expertise to deliver tangible and scalable results. Stark is a manufacturer's representative for Schneider Electric. In addition, our in-house expertise enables integration of any building management system with best-in-class lifecycle support and service. Job Posted by ApplicantPro

Job Description Job Title: Residential Electrician About One Call Electrical, Heating & Cooling Service has been the ‘go-to’ interior home service company for NJ homeowners for the past 27 years. With a top of the line customer service team and our Professionally Trained Technicians, we are able to provide high-quality service while building a family-like relationship with our client base. Role The Electrician will be responsible for all aspects of the installation, maintenance, inspection, operation and repair of the electrical systems in residential buildings. This includes; install and maintain wiring, control, and lighting systems, inspect electrical components, such as transformers and circuit breakers. Technicians will primarily respond to service calls, but will also do planned maintenance and/or installation as needed. Experience in the lighting and electrical repair industry is preferred. Our company offers on-the-job training and opportunities for wage increases based on skill improvement. Responsibilities The essential functions include, but are not limited to the following: • Serving the clients by expertly servicing customers’ entire needs., • Wear floor savers while in the client’s home and maintain a neat work area when performing a repair or scheduled service., • Always explain to the client what service you are performing. Explain and show the client how the company provides superior service., • Install, maintain, modify and repair all electrical distribution systems and associated electrical equipment, • Inspect and test components of electrical systems, including transformers, transfer switches and switch gears, • Survey electrical systems, circuits and plans, • Understand your sales criteria and hold yourself accountable for exceeding revenue goals., • Establish rapport with clients to sell the right products and services., • Re-check all electrical repairs and installations after you’ve repaired or replaced it, before leaving the client’s home to ensure everything is working properly and that we did indeed fix it right the first time., • Perform a proper inspection of the client’s entire electrical system. Make sure you look for ways to prevent future breakdowns. Properly use the Pricing Guide. Do the right job for the client and everyone will win., • Explain the club memberships to the client, giving them an opportunity to join. Maintain an average conversion of at least 25% of non-club members and maintain a 90% renewal rate on existing club members., • Maintain your truck so that it is neat and clean on the inside and outside at all times. The truck is one of the best billboards that the company has. Park the truck for the maximum impact of the “billboard” when possible., • Obey the company Code of Ethics and the Team Rules., • Maintain a clean, organized job site and well inventoried truck., • Always be safety conscious both on the job and while driving., • High school diploma/GED required, • 5+ years’ experience in the electrical trade, • Self-starter, reliable, flexibility with hours, • Strong customer service skills, • Understanding of the current regulations within the field, • Excellent interpersonal communication skills on a technical level, • Able to work both independently and as part of a team, • General knowledge of power tools and techniques for care and safe use, • Maintain a valid driver’s license and acceptable driving record, • Health Benefits, • Paid vacation and sick time, • We supply your leads, • We're busy year-round! n1MRGsAUNP

Job Description Role & Responsibility Operate electrical test equipment including voltmeter, multimeter, megger, and amprobe. Install, perform preventive maintenance, and troubleshoot motor control and lighting systems using wiring schematics. Perform preventive maintenance, troubleshoot, and repair motors. Troubleshoot advanced control system and instrumentation equipment including PLC controls using wiring schematics. Use infrared camera to perform preventive maintenance and troubleshoot. Install and configure VFD power and control wire. Understand and interpret electrical drawings, wiring diagrams, and network maps for troubleshooting and installation. Able to work on electrical systems including 5VDC, 12VDC up to and including 480 VAC. Size and wire transformers. Install various electrical controls. Interpret electrical schematics and symbols. Know and understand NEC codes, become trained in NFPA-70E, and practice all other electrician duties in a manufacturing environment. Maintain safe and clean working environment by complying with procedures, rules, and regulations. Understand manufacturing principals such as Lean, Lean Six Sigma, and CMMS fundamentals. Qualifications & Requirements Must be capable of working in a manufacturing setting in a safe manner and follow all safety rules and practices. Must have the desired technical skills to work as a maintenance mechanic or electrician. Maintain a high standard for housekeeping. Follow instructions on printed work or customer orders to complete assigned tasks. Basic computer skills preferred to complete safety training and review work-related email. Ability to learn to operate required equipment, including mobile equipment (forklifts, etc.) Familiar with common hand tools and how to properly use them. Good communication skills needed to work with coworkers and customers. Demonstrates the ability to cooperate with co-workers in areas of safety, quality, and understands importance of completing assigned tasks and their relationship to other requirements. Recognize unsafe conditions or hazards within work area. Maintain the highest level of personal safety and work within USG Safety Program. Pay Rate: $36.50/hr Shift: Weekly rotating schedule (1st shift 7am-3pm; 2nd shift 3pm-11pm; 3rd shift 11pm-7am) Rate of pay may be adjusted based on the qualifications and experience of the candidate. USG employees enjoy a number of benefit options for themselves and their families. These include two medical insurance options, as well as vision and dental coverage. The cost of these optional programs varies based on coverage level - employees generally pay 25% of the monthly premium cost, USG pays the rest. These coverage options are offered on the first day of employment with no waiting period. Additionally, USG employees enjoy both a 401(k) Investment Plan with company match and a pension plan. Beyond these main features, employees may also choose from a number of additional programs like life insurance, accident insurance, legal insurance, even pet insurance, just to name a few. USG also offers Quarterly (hourly) / Annual (salary) bonus potential for all employees based on performance metrics tied to safety, quality, and productivity. USG also provides employees with paid time off and paid holidays. Since 1902, Chicago-based USG has been a leader in producing innovative, award-winning products and systems to build everything from major commercial developments and residential housing to home improvements. USG's employees are committed to the highest levels of customer satisfaction and quality in everything we do. Our steadfast commitment to the company's core business values – innovation, quality, integrity, service, diversity, efficiency and safety – have helped us become the company we are today. EOE including disability/veteran

Job Description Responsible for installing, maintaining, and repairing heating, ventilation, and air conditioning (HVAC) systems. They perform emergency repairs and ensure compliance with safety regulations, often collaborating with other specialists. Looking for candidates throughout the state. Key Responsibilities: • Install new systems, parts, and components, including electrical wiring., • Perform scheduled inspections and preventive maintenance on HVAC systems., • Diagnose and repair mechanical and electrical faults, replacing worn or defective parts., • Inspect and test HVAC systems and components to ensure proper functionality., • Troubleshoot and find the source of HVAC system malfunctions., • Recommend maintenance and improvements to enhance system performance., • Keep records of work performed, including repairs and maintenance., • Perform emergency repairs promptly and efficiently when required., • Ensure compliance with appliance and OSHA standards to maintain safety and quality., • Valid, Active New Jersey HVACR license., • Proficient in installing, maintaining, and repairing HVAC systems., • Skilled in installing electrical components and wiring for HVAC systems., • Ability to inspect and test HVAC systems and components., • Strong problem-solving skills to diagnose and repair system malfunctions., • Knowledge of how to replace worn or defective parts in HVAC systems., • Ability to recommend maintenance procedures to optimize system performance., • 30-35/hr, • Health, • Dental, • Vision, • 401k, • Life Insurance Pay: $30.00 - $35.00 per hour Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off

Job Description We are looking for an HVAC Technician to join our team! You will install, service, and repair heating and air conditioning systems. Responsibilities: • Install new heating, ventilation, and air conditioning systems, • Inspect and perform equipment repairs and replacements, • Perform routine preventative maintenance, • Respond to emergency maintenance requests, • Previous experience in HVAC or other related fields, • Familiarity with HVAC wiring diagrams, • Ability to handle physical workload

Job Description We are looking for an HVAC Technician to join our team! You will install, service, and repair heating and air conditioning systems. Responsibilities: • Install new heating, ventilation, and air conditioning systems, • Inspect and perform equipment repairs and replacements, • Perform routine preventative maintenance, • Respond to emergency maintenance requests, • Previous experience in HVAC or other related fields, • Familiarity with HVAC wiring diagrams, • Ability to handle physical workload, • Strong problem solving and critical thinking skillsCompany Descriptionpromatrix.techhpromatrix.techh

Job Description Job Summary: We are seeking a skilled and dependable HVAC Service Technician to maintain, diagnose and repair residential and/or commercial heating, ventilation, and air conditioning systems. The ideal candidate has strong troubleshooting skills, customer service experience, and a commitment to quality workmanship. Key Responsibilities: * Diagnose and repair HVAC systems, including air conditioners, furnaces, heat pumps, and ventilation systems * Perform routine maintenance on residential and commercial HVAC equipment * Install new HVAC systems and retrofit existing systems when needed * Test and calibrate HVAC systems for proper functionality * Interpret wiring diagrams and technical manuals * Communicate effectively with customers to explain repairs, options, and system care * Complete work orders, service reports, and maintain accurate records * Comply with all local HVAC codes, safety regulations, and company policies * Maintain tools and inventory in service vehicle * Participate in on-call rotation and respond to after-hours service requests Qualifications: * High school diploma or GED required * HVAC certification or diploma from technical school (EPA 608 certification required) * 2+ years of field experience preferred * Valid driver’s license with clean driving record * Strong diagnostic and mechanical skills * Familiarity with HVAC tools, gauges, and diagnostic equipment * Good communication and customer service skills * Ability to work independently and as part of a team Physical Requirements: * Ability to lift up to 50 lbs and work in confined spaces, attics, crawlspaces, or rooftops * Comfortable working in varying weather conditions * Standing, bending, kneeling, and climbing ladders for extended periods Benefits: (if applicable) * Competitive pay + overtime * Paid time off and holidays * Commission * 401(k) plan * Ongoing training and certification support * Company vehicle and uniform provided

Job Description SERVICE TECHNICIAN POSITION SUMMARY: Critical thinker and self-starter, willing to go the extra mile and stay committed to educating themselves in our constantly changing field. Candidates should have extensive experience with installing, inspecting, and repairing of heating, cooling, ventilation, and refrigeration systems. Candidates should also be comfortable working with little to no supervision and possess a strong work ethic and team mindset Duties and Responsibilities: · Travel to customer locations, often multiple daily, as scheduled · Inspect existing HVAC systems for effectiveness and safety, perform consultations with customers to determine needs and discuss all solution methods · Install, inspect, troubleshoot and repair HVACR equipment to ensure proper HVAC and/or refrigeration operation in accordance with established procedures and according to code. · Conduct performance tests with specialized tools · Perform preventative maintenance on HVAC systems to increase longevity · Explain the benefits and assist in the selling of maintenance contracts to new customers and assure renewal of ongoing maintenance contracts with existing customer base · Maintain accurate inventory of all equipment and HVAC resources · Perform other duties as required to maintain equipment and follow all company and customer safety policies and procedures. · Maintain all site locations for safety and cleanliness before, during and after services are provided. Requirements and Qualifications: · 3-5 years apprenticeship under a journeyperson preferred (We are not seeking entry-level applications or those with residential experience only) · Certification through the Environmental Protection Agency to handle refrigerants required (Universal or Type I & Type II, 410A) · Technical high school certification and/or associate degree from an accredited HVAC program required · Knowledge of hand cutting tools, electric saws, and electrical and gas equipment. · Knowledge of electrical testing tools including multimeters. The ability to effectively utilize these tools and read electrical schematics. · Knowledge of refrigeration principals, ability to effectively troubleshoot and diagnose refrigeration issues. · Knowledge of specialty refrigeration tools, abilities to effectively perform specialized tasks with use of this tools while maintaining proper service practices. · Strong verbal communication skills, ability to explain complex HVAC issues with customers in a way they understand · Critical-thinker, problem-solver · Current valid driver’s license for operating motor vehicles in the state of New Jersey · Must be punctual and adhere to a daily schedule with multiple appointments in different locations · Must be available for 24-Hour Emergency On-Call Service, once a month (Additional Pay + Overtime) · Must be available for seasonal overtime during the summer and winter months · Must have professional appearance, strong writing abilities, computer skills, strong customer service skills · Must have strong troubleshooting skills with ability to think outside of the box and experience and understanding of commercial HVAC/R including, but not limited to o Split Systems, Package Units, Ductless Systems, Heat Pumps, Cooling Towers, Boilers, PTAC units, VAV’s, etc., o Chiller (experience a plus) o Refrigeration (experience a plus) o Controls troubleshooting (Distech a plus) o Must have knowledge and capability to complete repairs on compressors, condensers, evaporator motors, piping, control wiring etc. Working Conditions: · Pushing, pulling, and lifting various types of equipment. Walking, standing, and stooping for extended periods of time. Climbing and working from ladders and staging while carrying equipment that may weigh up to 75 lbs. · Working at difficult angles to perform repairs. Working in all types of weather conditions. May be exposed to dust, noise, heat, cold, lubricants, and chemicals during the course of work. · The above statements are intended to describe the general nature and level of the work being performed by people assigned this job. They are not an exhaustive list of all duties, responsibilities, knowledge, skills and abilities associated with the job. Job Type: Full-time We are a drug free company and require all employees to pass a drug test prior to beginning employment Company Benefits: · Vacation Days · Sick Days · Paid Holidays · Cell Phone · Company Issued Uniforms · Company Issues EZ-pass · Competitive Industry Salary based on experience and training · Health Care · Dental Plan · Vision Insurance · Matching 401K · Technician Training (In-House & School Based) · Company Vehicle if eligible

Job Description SUMMARY: This position is primarily responsible for maintaining and repairing physical structures of buildings, including electrical and plumbing; repairing/replacing appliances; and maintaining grounds by performing the following duties. DUTIES AND RESPONSIBILITIES: • Receives written work orders or verbal instructions from supervisor for completion, • Cuts grass and trim weeds on the organization's property., • Digs flower beds and plants flowers., • Constructs decorative flower garden borders from wood., • Cleans internal areas of buildings, including buffing, dusting, sweeping, and mopping., • Maintains the grounds by picking up trash., • Washes windows., • Empties trash cans and consolidates trash for weekly pickup., • Must possess basic knowledge of hand tools., • Paints interior and exterior walls and trim., • Repair parking lot and sidewalks with asphalt, cold patching materials, and concrete., • Operates snow removal equipment to maintain parking lots and sidewalks., • Maintains and repairs buildings' plumbing and electrical systems, including replacing worn or defective parts such as switches and fuses., • Repairs or replaces building brick, stone, and concrete., • Maintains and repairs wood parts of buildings., • Replaces worn or damaged parts such as hoses, wiring, and belts, in machines and equipment such as trucks, street sweepers, and riding mowers., • Assists other departments with moving furniture, appliances and unloading and storing supplies, • If part of an on-call rotation, required to respond to all emergency calls onsite within 30 minutes of receiving calls., • Performs other related duties as assigned by management. SUPERVISORY RESPONSIBILITIES: • This job has no supervisory responsibilities. QUALIFICATIONS: • High school diploma or general education degree (GED), or one to three months related experience and/or training, or equivalent combination of education and experience., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence clearly and informatively., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals, • Must have competent skills using a variety of tools., • Demonstrated ability to plan and prioritize tasks in a self-directed work environment and maintain high levels of productivity without direct supervision., • Detail oriented., • Able to work in a team environment and take direction., • Able to stand and exert fast-paced mobility for an entire shift., • Able to maintain balance, lift, bend, kneel, stoop, and wipe COMPETENCIES: • Problem-Solving - Identifies and resolves problems promptly; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem-solving situations; Uses reason even when dealing with emotional topics., • Technical Skills - Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to build knowledge and skills continuously; Shares expertise with others., • Customer Service - Manages difficult or emotional customer situations; Responds promptly to customer needs; Solicits customer feedback to improve service; Responds to requests for service and assistance; Meets commitments., • Oral Communication - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings., • Diversity - Demonstrates knowledge of EEO policy; Shows respect and sensitivity for cultural differences; Educates others on the value of diversity; Promotes a harassment-free environment; Builds a diverse workforce., • Ethics - Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethics; Upholds organizational values., • Professionalism - Tactfully approaches others; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments., • Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality., • Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly, • Attendance/Punctuality - Is consistently at work and on time; Ensures work responsibilities are covered when absent; Arrives at meetings and appointments on time. Responds timely to after-hour emergencies when on-call., • Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals; Completes tasks on time or notifies appropriate person with an alternate plan. PHYSICAL DEMANDS AND WORK ENVIRONMENT: • Continually required to stand, • Continually required to walk, • Occasionally required to sit, • Continually required to utilize hand and finger dexterity, • Frequently required to climb, balance, • Continually required to bend, stoop, kneel, or crawl, • Continually required to talk or hear, • Occasionally required to smell, • Frequently exposed to wet and/or humid conditions (non-weather), • Frequently work near moving mechanical parts, • Occasionally work in high, precarious places, • Occasionally work around fumes, airborne particles, or toxic chemicals, • Frequently exposed to outside weather conditions, • While performing the duties of this job, the noise level in the work environment is usually moderate to loud, • The employee must continually lift and /or move up to 10 pounds; frequently lift and/or move up to 25 pounds; and occasionally lift and/or move up to 50 pounds and more than 100 pounds, • Specific vision abilities required by this job include: Close vision; Distance vision; Color vision; Peripheral vision; Depth perception and the ability to adjust focus

Job Description This position is primarily responsible for addressing resident service requests. Addition responsibilities: maintaining and repairing physical structures of buildings, including electrical and plumbing; repairing/replacing appliances; and maintaining grounds. DUTIES AND RESPONSIBILITIES: • Receives written work orders or verbal instructions from supervisor for completion, • Cleans internal areas of buildings, including buffing, dusting, sweeping, and mopping., • Maintains the grounds by picking up trash., • Washes windows., • Empties trash cans and consolidates trash for weekly pickup., • Must possess basic knowledge of hand tools., • Paints interior and exterior walls and trim., • Repairs parking lot and sidewalks with asphalt, cold patching materials, and concrete., • Operates snow removal equipment to maintain parking lots and sidewalks., • Maintains and repairs buildings' plumbing and electrical systems, including replacing worn or defective parts such as switches and fuses., • Repairs or replaces building brick, stone, and concrete., • Maintains and repairs wood parts of buildings., • Replaces worn or damaged parts such as hoses, wiring, and belts, in machines and equipment such as truck, street sweeper, and riding mower., • Assists other departments with moving furniture, appliances and unloading and storing supplies, • If part of on-call rotation, required to respond to all emergency calls onsite within 30 minutes of receiving call., • Performs other related duties as assigned by management.

Job Description Overview: We are seeking skilled Low Voltage Technicians to join our team. As a Low Voltage Technician, you will be responsible for installing, maintaining, and troubleshooting low voltage systems in residential, commercial, and industrial settings. This role requires a meticulous attention to detail, strong technical skills, and a commitment to ensuring the safety and reliability of low voltage systems. Responsibilities: • Installation:, • Install low voltage systems including but not limited to security systems, access control systems, CCTV systems, fire alarm systems, and audiovisual systems., • Mount and configure equipment such as cameras, sensors, control panels, and wiring according to specifications and building codes., • Collaborate with other tradespeople and contractors to ensure seamless integration of low voltage systems with overall building infrastructure., • Maintenance and Repair:, • Conduct routine inspections of low voltage systems to identify and address any issues or potential failures., • Perform scheduled maintenance tasks such as testing circuits, replacing components, and updating firmware/software as needed., • Respond promptly to service calls and troubleshoot system malfunctions to restore functionality., • Documentation and Reporting:, • Maintain accurate records of all installations, maintenance activities, and repairs performed., • Generate detailed reports outlining work completed, parts used, and any recommendations for future improvements., • Provide clear and concise documentation to clients and stakeholders regarding system functionality and maintenance procedures., • Quality Assurance:, • Ensure all work meets industry standards, building codes, and safety regulations., • Conduct quality checks on installations to verify proper functionality and adherence to specifications., • Identify opportunities for process improvements and suggest enhancements to increase efficiency and reliability., • Customer Service:, • Interact professionally with clients, project managers, and other stakeholders to address inquiries, provide technical support, and offer guidance on system operation., • Educate end-users on the proper use and maintenance of low voltage systems to optimize performance and longevity., • High school diploma or equivalent; technical certification or vocational training in electrical or low voltage systems preferred., • Proven experience as a Low Voltage Technician or similar role, with a strong understanding of low voltage systems and components., • Proficiency in reading and interpreting technical schematics, wiring diagrams, and installation manuals., • Familiarity with industry standards and regulations governing low voltage installations., • Ability to work independently with minimal supervision and as part of a team in a fast-paced environment., • Excellent problem-solving skills and attention to detail, with a focus on delivering accurate and reliable solutions., • Effective communication skills, both verbal and written, with the ability to interact professionally with clients and colleagues., • Valid driver's license and clean driving record; willingness to travel to job sites as needed., • Ability to lift and carry heavy equipment and materials (up to 50 lbs)., • Comfort working at heights and in confined spaces, as required by job site conditions., • Manual dexterity and hand-eye coordination for precise installation and wiring tasks., • Flexibility to work occasional evenings, weekends, or overtime to accommodate project deadlines and service calls.

Job Description We are currently seeking an Electrician's Helper! You will strive to provide safe electrical systems for a variety of customers. Responsibilities: • Install and repair electrical equipment and fixtures, • Install various types of raceway and cable tray systems, • Troubleshoot motor and control systems, • Perform routine maintenance on electrical wiring and systems, • Previous experience in electrical engineering or other related fields, • Familiarity with electrical schematics, blueprints, and manuals, • Familiarity with electrical equipment and hand tools, • Strong problem solving and critical thinking skillsCompany Descriptionpromatrix.techhpromatrix.techh

Job Description Growing commercial/ industrial electrical contracting company seeking a full-time electrical journeyman! The Journeyman is primarily responsible for installing the electrical scope for the given project. He/ She must be hands on, a self starter, takes pride in their work and a positive/ optimistic person. Qualifications -Minimum two (2) years of experience in the installation, maintenance, and repair of electrical systems, equipment and fixtures using blueprints, schematics and sketches. -Pass a background check, including drug test. -Ability to successfully install, maintain, and repair electrical wiring, equipment, and fixtures. -Knowledge using hand tools, small power tools, shop machines, and heavy equipment. -Knowledge with construction documents, blueprints, building plans, and installation manuals to determine materials requirements and installations procedures. -Knowledge installing and mounting electronic controls, device panels, sensors, and components. -Has a basic understanding of the latest edition of the NEC. Responsibilities -Perform work as directed by the foreman/ direct supervisor -Install different type of electrical systems and components in various commercial and industrial facilities. -Analyzes and quickly report any work problems to supervisor -Follows the companies the standards of safety, and exemplary quality of work Company DescriptionLynch Power is a fast-growing commercial and industrial electrical contractor based in northern New Jersey. Our young, tech-savvy team thrives on hard work, collaboration, and innovation. We are committed to delivering top-tier electrical solutions through teamwork, efficiency, and cutting-edge technology. Join us and be part of a dynamic environment where growth and excellence are our driving forces.Lynch Power is a fast-growing commercial and industrial electrical contractor based in northern New Jersey. Our young, tech-savvy team thrives on hard work, collaboration, and innovation. We are committed to delivering top-tier electrical solutions through teamwork, efficiency, and cutting-edge technology. Join us and be part of a dynamic environment where growth and excellence are our driving forces.

Job Description AMEC Electric is seeking responsible, dedicated and reliable journeyman electricians to bring their talents to work with us. Are you looking for a career with an established company? Are you willing to do whatever it takes to bring your career to the next level and join our team? Responsibilities: • High quality new installations of conduit, cable tray, wiring and equipment., • Efficient and safe service and repair of existing electrical equipment., • Neat appearance., • Good customer manner., • Able to work independently and with a team., • Must have a minimum of 4 years practical electrical field experience., • Knowledgeable of NEC codes and industry standards, • Understanding of NFPA 70E, • Trained, skilled and resourceful and able to use all tools and equipment., • Strong problem solving and critical thinking skills, • Strong understanding of electrical installation "means and methods"., • Valid Drivers LicenseCompany DescriptionCommercial and Industrial Electrical Contractor serving Central and Northern NJCommercial and Industrial Electrical Contractor serving Central and Northern NJ

Job Description Are we RIGHT for you? The word RIGHT stands for what we VALUE: Respect, Integrity, Growth, Honesty and Teamwork. Why join our team? Middlesex Water Company (NASDAQ:MSEX) has been an industry leader since 1897. We promote professional and personal development in a work environment that is supportive and responsive. We understand the importance of our services and the individuals who uphold our reputation. To learn more, please visit Job Summary: The Utility Service Representative III performs meter service and installation and system maintenance/repairs under the supervision of Foremen, Sub-Foremen, Inventory Control Specialist, and Senior Mechanic as applicable. The successful candidate will be passionate about supporting and driving the Company’s Values, RIGHT: Respect, Integrity, Growth, Honesty and Teamwork. Work Performed: • Perform all of the maintenance and repair functions on the water distribution system including, but not limited to, hand excavation, jack hammering, backfilling, paving, concrete repairs, pipe cutting and fitting; copper cutting, flaring and fitting; valve repair, hydrant repair, valve box and curb box repair; snow shoveling and plowing under the supervision of the jobsite Foreman., • Learn to install or replace meters and remote read systems; troubleshoot and repair remote read systems and wiring; locate, access, clean and operate curb boxes as necessary in conjunction with meter installations, shut offs and other service related work; checks for illegal and/or cross connections and evidence of meter tampering; performs shut offs, meter reading and other related service work as assigned., • Safely operates all tools and equipment and promptly reports all needed repairs., • Maintain company assigned vehicles in a clean and safe condition at all times. Maintain inventory of parts on crew trucks as directed by Foreman., • Learn the limits of the water distribution system and become familiar with reading and understanding the water distribution system maps., • Learn mark out procedures and complete them as assigned by the Director or the Foreman., • Communicate with other employees, customers and the general public in a responsible and courteous manner., • Required to be on-call as scheduled by the Foreman, to work flexible hours when doing shut-offs and to participate in the flushing program., • Perform work on the sewer collection system as needed and as assigned., • High school diploma or equivalent, required., • Ability to work unsupervised and maintain productivity and safety., • Valid NJ driver’s license, required., • Valid Class B Commercial Driver’s License (CDL) or the ability to obtain one within six months after employment., • Availability to work overtime on an emergency and/or call-in basis., • Willingness to work outdoors on a year-round basis., • Excellent attendance record., • Ability to speak, read, write, and understand English, required., • Salary Range: $35,847 – $53,770 annually, based on experience and qualifications., • Total Rewards Package Includes: - Medical, dental, and vision coverage (effective first of the month after hire)., • 401(k) with company match., • Company paid life and disability insurance., • Paid time off and 12 paid holidays., • Ability to hand-dig and perform strenuous labor., • Ability to lift 100 pounds assisted and 50 lbs. unassisted, • Ability to ascend and descend ladders., • Ability to climb into and out of trenches., • Ability to work outdoors in inclement weather., • Willingness to work outdoors on a year round basis. Candidates must be able to pass a drug screen, pre-employment physical, background check, and have a valid driver’s license. This position requires a Commercial Drivers License. Use of marijuana, whether allowed by state law or medical marijuana card, controlled substances, prescribed or otherwise, not allowed by the Federal Motor Carriers Administration of the United States Department of Transportation, disqualifies candidacy. No phone calls please. We thank all applicants in advance for their interest; however, only those applicants who are being considered for the position, or are currently employed by Middlesex Water Company will be contacted. Middlesex Water Company and its' subsidiaries are an Equal Opportunity Employer. This job posting complies with the New Jersey Pay Transparency Law, effective June 1, 2025, which mandates the disclosure of salary ranges, benefits, and other compensation in job advertisements.

Job DescriptionEG&R is seeking an Electrical Engineer with experience in the Power Industry (Power Plants / Substations) who is self-motivated and ready to contribute to the future success of EG&R Engineering PC. Responsibilities: Main responsibilities include creating electrical protection & control and/or physical layout design deliverables for Power Plants and Substations. • Prepare electrical schematics, single lines, calculations, and specifications for the design of electrical distribution systems for Power Plants and Substations., • Supervise and Coordinate Electrical Engineers and Designers in day to day tasks to support project needs., • Review and support the preparation of physical substation design, sections and details, grounding, lightning protection, control building arrangements, interior and exterior raceways, auxiliary AC/DC power systems, and associated bills of material is required., • Develop protection and control designs including panel arrangements, one lines/single lines, three lines, AC schematics, DC elementaries, equipment wiring and relay panel wiring as required., • Prepare calculations for studies and reports (grounding, lighting protection, AC/DC load studies, etc.), • Prepare equipment specifications for procurement, • Provide short term field support during constructionQualifications:, • 2 to 5 years of experience in Engineering and Design for Substations and/or Power Plants, • Bachelor of Science/Masters degree in electrical engineering (Power Distribution/Power Systems) from an accredited institution., • Desire to obtain Engineer-in-Training (EIT) certification and ultimately Professional Engineer (PE) license, • AutoCAD and/or Microstation experience, • Proficiency with National Electrical Safety Code and IEEE / ANSI Standards, • Strong problem solving, organizational, and interpersonal skills., • Aptitude to work in a team environment, • Excellent written & verbal communication skills, • Strong management skills and a desire to grow professionally, • Capability of solving difficult problems that require adaptation and modification of standard approaches, techniques, procedures and criteria

Job Description Technical Staffing Resources (TSR) is seeking an Electrical Engineer to work with one of the largest EPC firms in the country. This is a long-term contract position in Parlin, NJ. Electrical & Instrumentation Engineer As an Electrical & Instrumentation Engineer, you will perform advanced engineering techniques, makes decisions on engineering problems and methods, and interfaces with the client to define project scope. Required to perform electrical engineering and design assignments associated with production, maintenance, process, capital projects, R&D, and power distribution involving the application of established electrical technology and principles, including performing all electrical calculations, and often requiring coordination with other engineering design, and cross-functional competencies to provide economical and expedient task implementation. The assignment will include participation in all electrical functions associated with projects including assistance with front end loading, production design, electrical construction management, commissioning, startup, and troubleshooting activities. Provides technical guidance to designers and less experienced engineers and is consulted extensively by the associates and others with a high degree of reliance placed on scientific interpretations and advice. Job role is responsible for a measurable asset including but not limited to forecasting & budget. Responsibilities · Functions as a project lead for a small project or an area lead for larger projects. · Scope definition from receipt of basic data to Issue for Design process deliverables · Interface with the clients’ cross functional teams to define all operating requirements. · Responsible for study, design, specification, and services related to electrical systems including power generation, power systems performance and control, cabling and wiring, lighting, motor control centers, communication systems, cathodic protection, grounding, lightning protection, heat tracing, etc. · Responsibility for assessing the quality, robustness, and capability of newly designed and installed Capital Projects. · Industrial electrical power distribution ranging from high voltage (greater than 35kV), medium voltage (1kV through 35kV) through low voltage (120V through 1kV) · Electrical power distribution equipment such as generators, substations, switchgear, transformers, motor control centers, distribution panels · Electrical utilization equipment such as motors (AC and DC), controllers, electrical process equipment · Electrical drawing knowledge (reading and generation via MicroStation V8): · Single Line Diagrams · Three Line Diagrams · Schematic Diagrams · Wiring Diagrams · Physical Drawings · Involved in discussions around the control of the process. Frequently pulls in additional technical resources for making decisions about the project viability and resolve any safety concerns or hazards. · Provides engineering, Checkout and Qualification for the Capital Project process control systems, such as distributive control systems and components, instrumentation technology, and programmable logic controllers. · Overall responsibility for design, specification, selection, and services relating to instrumentation and control systems including basic process control systems, safety systems, control panels, analyzer systems, field instrumentation, valves, etc. · May self-perform or lead other engineers to complete project scope and provide technical guidance to less experienced engineers. On some occasions, will also plan, schedule, and conduct work requiring independent judgment and adaptation of engineering techniques. · Participation in Process Hazard Analysis for project-related work. · Define the process design basis for other disciplines, specifically Electrical Systems, conduit sizing, and Instrumentation and interface with these groups throughout detailed design. Leading multidisciplinary small project teams across several different businesses and site infrastructure. · Develop project estimates, scopes, and schedule. May lead estimate reviews. · Work with Construction Manager during FEL as well as to oversee project execution in the field. · Forecasting and project cost tracking, monthly. · Manage scope change technically and commercially. Requirements · Bachelor’s degree in electrical engineering or Control Systems · Must have a good understanding and knowledge of industry codes and standards (NFPA 70E/NEC, OSHA, IEEE, ANSI, NEMA, API, and ASI. · 8+ years of qualified related experience · Experience in the chemical, refining, or biofuels industry required. · Experience with P&ID Development, equipment sizing, electrical calculations, and instrumentation. Demonstrated leadership of process design on capital projects, including responsibility for budget, schedule, and change management. · Professional Engineering (P.E.) license preferred but not required. PHYSICAL REQUIREMENTS · Work is located at a chemical plant and requires exposure to ambient temperature extremes · Work may require using and wearing personal protective equipment such as fire-retardant clothing, hearing and eye protection, hard hat and steel-toed boots · Day-to-day physical requirements involve standard office activities including sitting/standing for extended periods of time, attending meetings, use of keyboard and mouse repetitively, lifting and carrying less than 20 lbs frequently, etc · Work requires moderate physical exertion including walking to operating areas and walking up stairs · Assignments may require conducting plant walkdowns and wearing chemical plant or refinery PPE to include an H2S monitor, escape respirator, and FP coveralls. Company DescriptionTechnical Staffing Resources, a KBR company, is a full-service staffing firm with over 75 years’ experience providing staffing support for industrial engineering, construction, maintenance markets and our affiliated government services division.Technical Staffing Resources, a KBR company, is a full-service staffing firm with over 75 years’ experience providing staffing support for industrial engineering, construction, maintenance markets and our affiliated government services division.

Job DescriptionWork for a manufacturing company in New Brunswick as an Assistant Maintenance Manager: This highly visible position requires you to supervise all aspects of the maintenance department, including personnel, machinery repair, preventive maintenance systems, etc. This is a hands on role. Hands-on experience in all phases of industrial plant maintenance in a manufacturing environment and be ready to take full responsibility when the manager is occupied. Knowledge of electrical, pneumatic, and steam systems a plus. This includes the cleanliness of building maintenance. *Oversees mechanics and porters *Maintains the preventive maintenance programs *Aids the maintenance team in performing diagnostic troubleshooting *Monitors quality of repairs *Oversees building and physical plant repair issues *Maintains porter schedule to maximize cleaning effectiveness of plant and machinery *Adheres to safety programs Required Skills: *Maintenance experience in an industrial setting required *2+ years of supervisory experience in any setting *Knowledge of industrial equipment fundamentals including electrical wiring, electrical components, pneumonic systems, steam systems, water systems, hydraulics and building maintenance *Ability to use basic hand tools properly and safely *Experience responding in a time-sensitive environment with urgency *Ability to obtain and maintain proper licensing needed to legally operate specific plant machines (boiler license, etc.) Position reports to the Maintenance Manager. PLC Experience $85,000 #ZRSS

Job DescriptionOutside Sales Representative Metro Valve & Actuation, a second-generation company founded in 2001, specializing in high-quality valve and actuation products and services, seeks an Outside Sales Representative. We are looking for a relationship-driven self-starter who likes to build long-term relationships with customers and be proactive by upselling products. This will be a pivotal role as it is instrumental in acquiring new business to help the organization grow. This position will ensure that by working directly with engineers, contractors, and our purchasing departments, customers will have a smooth and seamless experience from the beginning to the end of the sales process. Responsibilities • Be the “go-to” person for your customers’ product knowledge and needs., • Conduct outside sales activities to promote company products and services, build client relationships, and identify new business opportunities, • Track and manage all active quotes, ensuring timely follow-up with customers, • Assess needs and prepare detailed, accurate product proposals by coordinating with internal teams to support closing opportunities, including technical specifications and pricing, • Generate new leads through research, networking, site visits, and outreach to prospective customers, • Maintain strong relationships with customers by providing updates, addressing concerns, and ensuring a high level of service and satisfaction, • Follow up on proposals and sales leads, • Coordinate with various internal employees and departments to determine appropriate pricing markups, align on delivery schedules, and identify products, • Process customer orders accurately and manage documentation, • Organize and lead Lunch & Learn sessions, • Conduct engineering calls to consult on specifications, project needs, product sustainability, and more, • Collaborate with other sales team members to review project specifications, ensure accurate product selection, and support quote preparation and technical documentation, • Coordinate with suppliers to confirm pricing, lead times, and availability, • Relay all necessary costs and pricing information to inside sales colleagues to support accurate quote generation and order processing, • Communicate regularly with customers to inform about new product offerings or potential solutions, ensuring smooth transactions, • Manage sales related to actuator or product repairs, including quotes, customer communication, and coordination with the Service or Warehouse teams as needed, • Communicate delivery requirements with inside sales colleagues to ensure accurate order fulfillment and customer satisfaction, • Offer support on installation, warranty, and logistics, • Maintain relationships through effective and timely follow-up -A high school diploma or equivalent is required; an Associate's or Bachelor's degree in Engineering, Business or a related field is preferred -Outside sales experience, preferably in HVAC or technical/industrial sales -Proven long-term client/customer relationship experience -Relentless attention to detail, also very organized and proactive -Ability to be a self-starter, also self-sufficient, responsive, and technically minded (mechanical/technical aptitude) -Strong problem-solving and customer service skills -Excellent written and verbal communication skills -A great communicator who will represent the company to vendors and customers and communicate well with internal staff -Proficient in Microsoft Office, Google Workspace, QuickBooks (or willing to learn) -Familiarity with working alongside engineers and contractors is preferred About Us Metro Valve & Actuation is a family-owned business established in 2001, specializing in providing high-quality products and services to industries such as HVAC, water and wastewater management, power utilities, and oil and gas. We are committed to delivering exceptional solutions to both end users and contractors, ensuring reliability and efficiency in every project. Our expertise includes offering job-specific wiring diagrams, valve and actuator assembly drawings, valve and accessories layouts, and "as-built" drawings. At Metro Valve, we pride ourselves on our strong values, personalized service, and dedication to meeting the unique needs of each client. Converge HR Solutions and our clients provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Powered by JazzHR g72TeSLjXD

Job Description Applied Business Communications (ABcom) is a national low voltage BICSI Certified Prestige commercial structured cabling contractor and we are recruiting a Data Center Technician. “We Connect” relationally and technically. And, we do it within the framework of our corporate values: Family, Accountability, Profitability, Integrity, and Quality. Position is immediately available. Apply now to join our great team today! Requirements Essential Functions: • Perform Cages, Racks and Cabinets setup, layout, leveling and power strip installation., • Installation and termination of Fiber and Copper, • Installation of patch cords, • Performs installation of wiring, patch panel and network switch, hub, and console, • Ability to read and understand cabling matrix, • Perform Rack and Stack for various IT equipment when required on a day to day basis, • Uncrates, moves, equipment from loading dock., • Provide support to collocation customers, provide prompt response to customer requests., • Perform required Site inspections., • Work with vendors performing electrical ensuring that all work is performed according to established practices and procedures., • Understand, update and execute detailed Method of Procedures (MOPs), • Maintain data center operating procedures, • Maintain accurate records and document all problems, • Able to work night and weekends when needed SKILL/KNOWLEDGE REQUIREMENTS: • 3+ years experience running projects in the communications cabling Industry, • Data Center experience, • Demonstrate a clear knowledge of codes and standards, • Ability to complete and submit accurate documentation which tracks work progress including timesheets and other related documents, • Communicate with strong written and verbal skills, • Maintain a positive attitude and professional dress and demeanor CERTIFICATION (desired): • BICSI Certified Technician -- Installer 1 or 2, Copper and/or Fiber, • Other manufacturer certifications, • Other certifications such as OSHA, Confined Space, etc. TOOLS: Owns all company required communications technician hand tools, keeps them in good operating condition, and knows how to use them

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description General Responsibility The Customer Support Hotline Engineer is a hands-on role that demands strong technical expertise, organizational abilities, and exceptional communication skills. This position leverages solid experience in electrical systems and controls to provide support to clients across North America, Mexico, and Central America. The Engineer is also responsible for coordinating and delivering hotline support services for both new and legacy customers, working closely with our European hotline teams to ensure seamless global service. This role offers significant opportunities for career growth and involves collaboration across various technical disciplines, including mechanical and electrical engineering, software development, project management, and customer support. The position may require ongoing training and on-site visits, with frequent travel primarily within North America, and occasional extended international travel as needed. Responsibilities • Ability to learn and understand electrical and control aspects of installed systems, • Access and troubleshooting of electro-mechanical components and systems, including PLC and PC communications., • Understanding system applications and how they translate into operational and functional requirements., • Effective, courteous communication with customers and provide technical expertise to guide and aid in issue resolution., • Investigate a root cause analysis or develop another corrective action in resolving issues., • Communicate and coordinate problem resolution actions with engineering, customer support, and other personnel to resolve issues., • Interpret maintenance manuals, schematics, wiring diagrams and other documentation., • Instructs and directs workers in servicing and repairing equipment., • Consults with engineering personnel to resolve unusual problems in system operation and maintenance., • May supervise workers in testing, tuning, and adjusting equipment to obtain optimum operating performance., • Understand electrical drawings and specifications as they relate to machine control programming., • Strong Customer communication skills., • Develop and implement strategies and standards for training, skills matrix, response and reporting., • Utilize best practices with our European hotline and technical groups,, • Utilize stage gate process in regard to hotline and new systems., • Utilize best practices of Service Now, as defined by Technical Team Leader Required Skills and Abilities • Associates or bachelor's degree in electrical or mechanical engineering, Engineering Technology, technical courses of study or other combinations of experience and training that meet the minimum requirements., • Strong time management and attention to detail, • Strong communication skills: verbal, written and interpersonal, • Excellent Troubleshooting skills, • Ability to handle multiple tasks and work under pressure; sense of both urgency and thoroughness., • Professional, positive, and energetic attitude., • Self-motivated, trustworthy, respectful of others., • Able to travel up to 40% of the time, as per business needs, • Strong PC skills (Windows, Word, Excel, remote capabilities)., • Strong understanding of industrial power, electrical and control circuits and devices., • Good understanding of networks and networking., • Demonstrated capability in PLC programming, with specific focus on SCO Unix, Linux, Siemens, and Allen Bradley based systems., • Ability to interpret schematics, diagrams and other documentation., • Attention to detail and the ability to learn quickly, • Works as part of the team, • Use computer-based tools for communication, trouble shooting, and programming., • To quickly acquire programming skills for machine control platforms Demonstrated expertise of: • Sortation systems, i.e. Crisplant Legacy systems, etc., • Electrical and control troubleshooting Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees. • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!

Job Description Are you looking for a new challenge in your career? Tired of working the same boring job? We’ve got just the change you're looking for, something new, different career path, and stability! Gerhart is seeking a CDL Field Technician with knowledge of heavy capacity weighing equipment to join our team. In this role technicians will specialize in operating a Test Truck/Rig to perform services on weighing equipment in the field. The ideal candidate should have a general mechanical or electrical background, be a self-starter with a solid customer oriented approach. Responsibilities: • Operation of company Test Truck and/or Rig type CDL vehicle to perform a variety of field services including: installation, calibration, testing, and maintenance of customer equipment, often outdoors, • Ability to mechanically and electrically troubleshoot, identify, and diagnose malfunctions and repair weighing equipment related to Heavy Capacity, • Capability of leading projects and being a resource to peers while on job sites, • Comfortable working in all work environments, outdoor industrial settings includes dust, dirt, extreme temps both hot & cold, • Able to work overtime as needed to complete projects within defined deadlines, • Hold a Class B CDL (drivers license), • Familiarity with industrial service tools, and welding experience desirable, • Basic understanding of 120VAC wiring and/or DC signal wiring, • Strong problem solving & critical thinking skills, • Offer exceptional customer service and communicate effectively We are a diverse company providing systems integrations, field service and turn-key installations of Process Automation Systems, Industrial Weighing Equipment, and Process Instrumentation. We are seeking highly motivated candidates to join our team of talented employees and contribute to our continued success and growth. Gerhart is a well-established company with over 90 years’ experience in the industry! Join our company where our people and excellence are essential to our culture. Gerhart Benefits package includes: • Benefits package: various medical options including 100% employer covered benefits, dental, and vision plans, • Paid Time off, • Life Insurance, • Matching 401k

Job Description Mobile Trailer Technician needed in North Haledon, NJ and New Hampton, NY. Preferred experience: body work, brakes, ABS diagnostics, wiring, liftgates, welding, and fabricating This is a mobile position, a valid drivers license required Pay based on experience and overtime available, but not required Responsibilities: • Repair trailers, • Perform routine vehicle maintenance, • Having experience in welding, construction, fabrication or mechanics is a plus but not required., • Knowledge of shop equipment a plus, • Strong mechanical aptitude and troubleshooting skills a plus, • Day shift positions available for shop work and road service, • Overtime Available, • Different positions available including transport refrigeration service and repair as well as shop mechanics, • Looking for someone with mechanical, welding, and/or fabrication skills, • Willing to train, • Pay rate based on experience, • Medical Insurance, 401 K and paid time off availableCompany DescriptionNorth Jersey Trailer and Truck Service Inc. is a full-service trailer dealer serving the entire New Jersey and New York metropolitan area, including Long Island, we offer onsite repairs and maintenance as well as transport refrigeration service at your facility and at our two fully equipped shops.North Jersey Trailer and Truck Service Inc. is a full-service trailer dealer serving the entire New Jersey and New York metropolitan area, including Long Island, we offer onsite repairs and maintenance as well as transport refrigeration service at your facility and at our two fully equipped shops.

Operations & Maintenance Technician. We are seeking an Operations & Maintenance Technician to grow our Service Department. The O&M tech must be tech savvy and have knowledge of basic wiring and schematics required to run diagnostics and maintenance of the Solar Systems.

Job Description Job Title: Service Technician Job Type: Full-time Company Information Our company was established in 1984 as an HVAC service company. We have grown into one of the largest mechanical contractors in NJ servicing large commercial and industrial buildings consisting of chiller plants, built-up penthouses, and large HVAC equipment. We believe all customer interactions should be executed with the highest level of professionalism, excellence, and competency at all levels of the organization. We are looking for highly motivated, self-starter with ability to work with minimal supervision to join our growing team of HVAC professionals. Signing Bonus Based on Experience Qualifications: Minimum of 5 Years Experience • EPA Certified • Clean Driver's License This position is responsible for diagnosing & repairing HVAC system's, with accuracy and to the customer’s satisfaction. This position has working conditions that expose you to various weather conditions and require you to work outside normal working hours including evening, weekends, and holidays. Responsibilities Service technician is responsible for diagnosing and repairing HVAC systems, on time and to the customer’s satisfaction. This position has working conditions that expose you to various weather conditions and require you to work outside normal working hours including evening, weekends, and holidays, when necessary. · Maintain and repair heating, air conditioning, and ventilation systems consisting of various mechanical, duct, and piping systems. · Identify maintenance risks on equipment. · Diagnose electrical and mechanical faults for HVAC systems. · Clean, adjust and repair systems, and perform preventative maintenance. · Perform emergency repairs promptly and efficiently. · Site preparation & clean-up · Maintain a clean truck and job site. · Ensure compliance with code standards and system specifications. · Maintain regular attendance and willingness to work OT and weekends. · Work as a professional with clients, co-workers, and subcontractors Required skills and strengths: · A valid driver's license and a clean driving record · Proficient in reading schematics, wiring diagrams, and work plans. · Union Employee Preferred · Experience as an HVAC Service Technician · Ability to work staggered schedule · Must be able to perform the physical requirement of the job · Strong customer service and communication skills · Able to work in a fast-paced environment · Able to multi-task and focus amid distractions · Good listener and a team player · Detail oriented · Organized, flexible and follow directions · Hard-working and motivated Minimum Requirements · Must be able to lift a minimum of 75 lbs. · Must be able to climb ladders. · Must be able to endure walking, squatting, bending, balancing, climbing, kneeling, crawling and prolonged standing. · Ability to advise customers of potential issues and suggest upgrades to improve efficiency and indoor air quality products. · Follow instructions from supervisor and complete in a timely manner. · Work cooperatively with others. Work independently with little direction. · Interact with clients to ensure satisfaction.

Job DescriptionJob Title: Assembler Job Description We are seeking a diligent and detail-oriented Assembler to join our dynamic team. You will be responsible for assembling various products ranging from electrical cords to mobile generator systems. Your keen attention to detail and excellent personality will be vital in ensuring the quality and efficiency of our production process. Responsibilities • Assemble products ranging from electrical cords to mobile generator systems., • Perform point-to-point wiring and the person stripping., • Utilize hand tools such as screwdrivers, tape measures, wire strippers, and utility knives., • Proficient in point-to-point wiring., • Experience with the person stripping., • Willingness to learn and adapt., • Reliability and flexibility are essential. The pay range for this position is $17.00 - $18.70/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Somerset,NJ. Application Deadline This position is anticipated to close on Sep 15, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Mechanical Maintenance Technician.We’re seeking an experienced Mechanical Maintenance Technician to join our team.This role is responsible for performing all phases of mechanical maintenance throughout the plant, including preventative, corrective, and emergency repairs.The technician will work cl

Delivery Driver / Up to $31 per hour] - Choose Your Own Hours / Earn Guarenteed Minimums + 100% of Your Tips / Daily Pay & Instant Cashout - Skipcart is hiring delivery drivers for immediate positions in various locations across the country.As a Skipcart Delivery Driver, you will: Pick up customer o

Field Service CNC Machining Tools - Edison, NJ Field Service Mechanic Tech Maintenance Technician Engineer Install Repair Calibrate Maintain CNC Machine Tool Routers Grinders Saws Cutters Lathes Mills Millers Machining Centers Robot Loaders _.Service provider with opening for experienced Service Eng

CVS Health - 120 Fieldcrest Avenue [Package Delivery Driver / Flex Driver] As a Delivery Driver at CVS, you'll: Transport and deliver medication and front store items to patients in a safe and secure manner; Maintain delivery log of activities per policy and procedure; Report status and any problems

Connecting, disconnecting, testing, repairing, maintaining equipment, inside wiring and wires at poles, underground or building terminals. Placing, removing or repairing copper wiring, fiber optic or cable between poles, buildings.

Personal Shopper] As a Grocery Delivery Driver at Shipt you will: Get paid to shop by filling customer orders and delivering to their door; Earn up to $22/hour* shopping for and delivering things people love from stores they trust; Set your own hours - part-time - full time - or any time; Be at leas

Mechanical Maintenance Technician.Were seeking an experienced Mechanical Maintenance Technician to join our team.This role is responsible for performing all phases of mechanical maintenance throughout the plant, including preventative, corrective, and emergency repairs.The technician will work close

Personal Shopper] As a Grocery Delivery Driver at Shipt you will: Get paid to shop by filling customer orders and delivering to their door; Earn up to $22/hour* shopping for and delivering things people love from stores they trust; Set your own hours - part-time - full time - or any time; Be at leas

Job Description**: As a Warehouse Worker at DHL, you will perform a variety of tasks essential to the smooth operation of the warehouse.Your responsibilities will include picking and packing orders, handling inventory, and maintaining a clean and organized workspace.You will need to operate various

Food Delivery / Team Member] As a Delivery Driver @ CPK you will: Ensure outstanding customer service and quality of product to every customer; Ensure order accuracy before leaving restaurant; Take orders over the phone; Generally supporting daily restaurant operations.

We want you to help us shape the future of shopping experiences and deliver on our purpose of connecting people with the products and experiences that enrich their lives.Joining Advantage Solutions means joining a network of 65,000 teammates serving 4,000+ brands and retail customers across 40+ coun

Field Service CNC Machining Tools - Edison, NJ Field Service Mechanic Tech Maintenance Technician Engineer Install Repair Calibrate Maintain CNC Machine Tool Routers Grinders Saws Cutters Lathes Mills Millers Machining Centers Robot Loaders _.Service provider with opening for experienced Service Eng

Job Description**: As a Warehouse Worker at DHL, you will perform a variety of tasks essential to the smooth operation of the warehouse.Your responsibilities will include picking and packing orders, handling inventory, and maintaining a clean and organized workspace.You will need to operate various

Floor & Decor - Job Posting Site [Material Handler / Freight Handler] As a Warehouse Associate at Floor & Decor, you'll: Receive the product off delivery trucks and stock the warehouse in an organized fashion; Ensure the sales floor is stocked and ready for customers the next day; Be knowledgeable o

Job Description**: As a Warehouse Worker at DHL, you will perform a variety of tasks essential to the smooth operation of the warehouse.Your responsibilities will include picking and packing orders, handling inventory, and maintaining a clean and organized workspace.You will need to operate various

Industrial / Maintenance Technician II.We are seeking a diligent and skilled Industrial / Maintenance Technician II to join our team.The ideal candidate will play a pivotal role in maintaining our packaging lines, ensuring high levels of efficiency and compliance with safety and quality standards.De