Wood jobs in Harrison, New YorkCreate job alerts

Job Description Pre-Production II is the dedicated kitting role for Assembly. This coordinator tracks work flowing out of metal finishing, anticipates what Assembly will need next, and builds complete, ready-to-build kits so assemblers can focus on building fixtures. This role is the critical link between finishing and the assembly bench, and its success is measured by how smoothly assembly runs. Key Responsibilities Kit Building for Assembly • Track parts as they come off metal finishing (plating, powder coat, hand polish, patina) and reconcile them to pending assembly orders, • Assemble complete kits per fixture BOM, including finished metal components, glass, wood, fasteners, and hardware, • Stage kits in the correct sequence and location for Assembly, with clear identification and any drawings or build notes included Electrical Components & Pre-Assemblies • Pull UL-listed electrical components (sockets, wire, strain reliefs, drivers, LED modules, transformers) per fixture specification and revision, • Build or stage required sub-assemblies (socket harnesses, pre-wired modules, canopy assemblies) to support assembly flow, • Confirm that electrical parts match the listed build and flag any substitutions before release Flow & Communication • Partner with metal finishing daily to understand timing and plan kitting accordingly, • Communicate shortages, damaged parts, or finish issues early to Pre-Production, Procurement, and Quality, • Support prototype and custom builds with one-off kitting as needed System & Record Keeping • Execute kitting transactions in WMS and NetSuite to maintain accurate part-to-job tracking and inventory, • Maintain clean, organized, and clearly labeled staging areasRequired Qualifications, • 2–4 years of experience in kitting, assembly support, or production material handling, • Ability to read and interpret BOMs and build lists, • Familiarity with basic electrical components used in lighting or similar products, • Strong attention to detail and ability to catch discrepancies before assembly, • Comfort working with ERP / WMS systems and scanners, • Ability to stand, walk, and lift up to 40 lbs throughout the shiftPreferred Qualifications, • Experience in lighting, electrical assembly, or UL-listed products, • Familiarity with UL 1598 / UL 8750 or general electrical standards, • Experience with NetSuite or similar systems, • Basic soldering or mechanical pre-assembly experienceCompensation & Benefits, • Salary: $60,000 – $75,000 annually (based on experience), • Eligible for discretionary annual bonus, • Medical, dental, and vision insurance, • 401(k) with company match, • Paid time off and holidays, • Employer-paid life and disability insurance, • Safety shoe and eyewear allowance, • Employee discount on Allied Maker productsWork Environment & Physical Requirements, • On-site at the Glen Cove workshop, • Primary work areas include kitting zones and staging lanes adjacent to assembly, • Active shop-floor environment; safety glasses and closed-toe footwear required, • Requires standing, walking, reaching, and repetitive handling of small parts, • Occasional lifting up to 40 lbsAbout Allied Maker Allied Maker is an American design and manufacturing studio creating luxury-crafted lighting fixtures. Based in New York, each piece is made to order by a dedicated team of craftspeople, with a focus on authentic materials, refined form, and enduring quality. The studio operates at the intersection of design, engineering, and manufacturing. Ryden Rizzo leads product design and form. Lanette Rizzo leads design direction, production, and client strategy. Together, they set a standard where design integrity, engineering, and performance are inseparable. Allied Maker is widely specified by leading architects and designers and continues to expand its capabilities while maintaining a singular focus: deliver artisan-crafted, highly engineered, sophisticated yet simple lighting design solutions. Salary Range Annually$60,000—$75,000 USD

Job Description The Design Engineer translates creative direction into buildable fixtures. Working on both new collection development and bespoke custom orders, this role produces detailed CAD models, drawings, and documentation that our shop floor, vendors, and installers can all build from. The Design Engineer partners closely with the design studio on aesthetics, with the Manufacturing Engineer on producibility, and with the Assembly and Quality teams on how a fixture actually comes together and gets inspected. Key Responsibilities CAD & Technical Drawings • Create parametric 3D models and manufacturing drawings in Autodesk Fusion (or similar tools) for collection and custom fixtures., • Produce clean, dimensioned drawings with tolerances, finishes, and notes appropriate to the vendor or in-house process., • Develop BOMs and maintain part revisions in NetSuite with support from the Systems Engineer. New Product & Custom Development • Partner with the design studio from concept through production release: sketch review, massing studies, proportion and scale studies, and prototype iteration., • Specify materials and finishes in collaboration with Design, including glass, machined and spun metal, alabaster, and wood., • Lead prototype builds, capture lessons learned, and carry them into a clean production release. Manufacturability & Vendor Handoff • Review designs with the Manufacturing Engineer for manufacturability, tolerance stacks, and cost before release., • Issue drawing packages to vendors and answer technical questions through the Manufacturing Engineer., • Incorporate feedback from QC and Assembly into drawing updates and ECOs. Standards & Compliance • Design fixtures that meet UL 1598 / UL 8750 and relevant electrical and structural standards in collaboration with the Assembly Engineer., • Maintain design documentation and revision history in a disciplined way so that what's in the field matches what's in the system.Required Qualifications, • Bachelor's degree in Mechanical Engineering, Industrial Design Engineering, or a closely related field., • 3–5 years of design engineering experience producing production-ready drawings for manufactured products., • Strong CAD skills in Autodesk Fusion (Fusion 360) or a comparable parametric CAD tool, with GD&T proficiency., • Experience designing for multiple materials and processes: machining, metal spinning, casting, glass, and wood., • Ability to balance aesthetic intent with buildability; comfortable iterating with a design-led team., • Strong communication skills and organized documentation habits.Preferred Qualifications, • Experience designing lighting fixtures and familiarity with UL 1598 / UL 8750., • Experience with NetSuite item and BOM records., • Background in luxury goods, architectural hardware, or high-end furniture., • Exposure to rendering, photometric analysis, or thermal considerations for LEDs.Compensation & Benefits, • Base salary range: $90,000 – $115,000 annually (based on experience), • Discretionary annual performance bonus, • Medical, dental, and vision insurance, • 401(k) with company match, • Paid time off, holidays, and parental leave, • Employer-paid life and disability insurance, • Employee assistance program, • Safety shoes and prescription eyewear allowance, • Employee discount on Allied Maker productsWork Environment & Physical Requirements, • On-site at the Glen Cove, NY workshop; split between CAD work and time on the shop floor, • Occasional exposure to shop-floor conditions during builds and reviews, • Requires seated work with periodic standing and light lifting (up to 25 lbs)About Allied Maker Allied Maker is an American design and manufacturing studio creating luxury-crafted lighting fixtures. Based in New York, each piece is made to order by a dedicated team of craftspeople, with a focus on authentic materials, refined form, and enduring quality. The studio operates at the intersection of design, engineering, and manufacturing. Ryden Rizzo leads product design and form. Lanette Rizzo leads design direction, production, and client strategy. Together, they set a standard where design integrity, engineering, and performance are inseparable. Allied Maker is widely specified by leading architects and designers and continues to expand its capabilities while maintaining a singular focus: deliver artisan-crafted, highly engineered, sophisticated yet simple lighting design solutions. Salary Range Annually$90,000—$115,000 USD

Job Description Who we are: At Vireo Health, we’re not just another cannabis company—we’re a movement. Founded by physicians and driven by innovation, we blend science, technology, and passion to create top-tier cannabis products and experiences. Our team of 500+ bold creators and trailblazers are shaping the future of the industry, and we want you to be part of it. We take pride in being one of the most diverse and inclusive workplaces in cannabis, fostering a culture where everyone belongs. Through employee engagement, community events, and non-profit partnerships, we’re building more than a business—we’re building a community. As we rapidly expand nationwide, we’re looking for talented, driven, and passionate people to join us. If you’re ready to turn your passion into a career, let’s grow the future together. What the role is about: This position is responsible for safely transporting goods from a warehouse to customers' designated locations, following established routes and time schedules, ensuring timely delivery while maintaining the quality of items, and often including tasks like loading, unloading, and verifying order accuracy with customers upon arrival. Perform all appropriate related and unrelated duties, as directed. This is a transportation position. What impact you’ll make: Meeting the physical requirements of the job and the ability to work in the environmental conditions listed below to perform common transportation functions and duties. • Properly loading and unloading packages from the delivery vehicle at pick-up and drop-off points., • Utilizing GPS and maps to efficiently navigate to customer addresses and follow assigned delivery routes., • Interacting with customers to deliver packages, verify order details, and handle any delivery-related inquiries., • Ensuring the delivery vehicle is clean, properly maintained, and in compliance with safety regulations., • Completing necessary delivery documentation, including signing for packages and recording delivery information., • Adhering to delivery schedules and time windows to ensure timely deliveries., • Following specific instructions for handling delicate or temperature-sensitive items., • Adhering to all traffic laws and company safety guidelines while driving., • Maintain the professional standards of Vireo Health by following the policies and procedures of company. What you’ve accomplished: • Valid driver's license and clean driving record., • Excellent navigation skills including the ability to read maps and effectively use GPS systems to find addresses., • Must be fluent in English with the ability to read and understand printed regulations, written orders and instructions;, • Excellent Customer service skills while interacting with customers, • Physical ability to lift and carry packages of varying weight., • Time management skills to manage delivery schedules and meet deadlines., • Attention to detail to ensure accurate delivery of items and proper documentation. Physical and Environmental Requirements: The Americans with Disability Act prohibits discrimination against a qualified individual with a disability. To be qualified for this position, an individual must meet the following standards and/or be able to perform the essential functions and activities with or without reasonable accommodation. This is a physical security position. The ability to perform under the following environmental and/or physical conditions is central to the position. Environmental: Work is performed year-round, inside and outside buildings and/or vehicles with exposure to inclement weather and unpredictable crisis situations. Possible agricultural environments with high levels of noise, dust, dirt, and manufacturing machinery such as saws, chains, wood chippers, forklifts, etc.; Shift work required, including day, swing, night, weekends and holidays all year-round. Work alone in poorly lit areas all hours, including nights. Physical: Navigating environments includes: • Outside in the elements and inclement weather conditions;, • Inside buildings, • Surfaces and environmental terrain can vary from (but not limited to)., • Carpet tile, wood, concrete, asphalt, grass, curbs, uneven gravel and dirt., • Uneven ground surfaces; common at mill and/or construction work sites., • Surfaces can be slippery with, water, ice, or snow in incline weather., • Maneuver safely up and down flights of stairs multiple times a round or shift. Stairs can be inside or outside. Also to navigate up / down hilly terrain, over curbs and other obstacles., • Lift, carry or push weight in the following range: 5 to 50 pounds., • Continuously stand at assigned post(s) for extended periods of time (with legal break times)., • Drive times may extend up to 16 hours per day. Why Choose Vireo Life’s too short to work somewhere that doesn’t ignite your passion. The cannabis industry is fast-paced, innovative, and full of opportunity—where science meets creativity, and wellness meets culture. At Vireo Health, we’re pioneering the future of cannabis with a team that’s as dynamic as the industry itself. Here, you’ll find a workplace that’s collaborative, inclusive, and driven by HEART and purpose, where your work has a real impact on people’s lives. Whether you’re cultivating the highest-quality plants, crafting cutting-edge products, or shaping unforgettable customer experiences, you’ll be part of something bigger. If you’re looking for a career that’s exciting, meaningful, and full of growth, let’s build the future of cannabis together. ✅ A Growing Industry: Work at the leading tech company in the cannabis industry and help shape the future ✅ Passionate Culture: Join a team that truly cares about the plant, the people, and the purpose behind what we do ✅ Employee Perks: Enjoy competitive pay and benefits, paid time off and employee discounts ✅ Making an Impact: We’re committed to education, sustainability, and giving back to the communities we serve. EEO Statement Vireo Health, Inc. is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. www.vireohealth.com This is a full-time role, compensated at $20/hr. Powered by JazzHR Lpz3lzRYeg

Job Description The Manufacturing Engineer sits between Allied Maker's Design team and the outside world of partner vendors. When a tolerance doesn't behave, a finish won't hold, a material fights the process, or a vendor asks a question that could change the part, this is the person who answers, and then loops back to Design with the improvement. The Manufacturing Engineer is a hands-on problem solver whose work keeps fixtures buildable, beautiful, and on schedule. Key Responsibilities Vendor Technical Liaison • Serve as the primary technical contact between Design Engineering and partner vendors (machining, spinning, casting, glass, alabaster, wood), • Resolve vendor questions about tolerances, materials, finishes, and process capability while preserving design intent, • Support QC on supplier quality issues: investigate root cause, implement corrective actions, and verify effectiveness Design for Manufacturability (DFM) • Review designs with Design Engineering for manufacturability, tolerance realism, assembly fit, and cost before release, • Propose actionable design improvements to improve yield, cost, and schedule while maintaining design intent, • Maintain a library of DFM lessons learned Process & Tolerance Ownership • Own tolerance stack-up analysis on critical features, • Resolve conflicts between design intent and vendor capability, • Define inspection and acceptance criteria with QC, • Lead first-article reviews and process qualification for new vendors and parts Continuous Improvement • Partner with Assembly, Pre-Production, and Quality to resolve recurring issues from vendor parts or upstream design, • Track the cost of poor quality and lead-time impact from vendor issues and report trendsRequired Qualifications, • Bachelor's degree in Mechanical, Industrial, or Manufacturing Engineering, • 3–5 years of manufacturing engineering experience with vendor interaction, • Strong knowledge of machining, spinning, casting, and finishing processes, • Fluent in GD&T (ASME Y14.5), tolerance stack-ups, and process capability, • Strong communication skills across technical and non-technical stakeholders, • Organized, decisive, and able to own issues through resolutionPreferred Qualifications, • Experience in lighting, luxury goods, architectural hardware, or custom manufacturing, • CAD experience (Fusion or similar), • Familiarity with UL 1598 / UL 8750, • Lean / Six Sigma experience, • Experience working with Northeast US vendorsCompensation & Benefits, • Salary: $95,000 – $120,000 annually (based on experience), • Discretionary bonus, • Medical, dental, vision insurance, • 401(k) with company match, • PTO, holidays, parental leave, • Employer-paid life and disability insurance, • Employee assistance program, • Safety shoe and eyewear allowance, • Employee product discountWork Environment & Physical Requirements, • On-site at the Glen Cove workshop, • Mix of desk work, shop floor time, and vendor interaction, • Active shop environment; PPE required where applicable, • Occasional travel to vendor facilitiesAbout Allied Maker Allied Maker is an American design and manufacturing studio creating luxury-crafted lighting fixtures. Based in New York, each piece is made to order by a dedicated team of craftspeople, with a focus on authentic materials, refined form, and enduring quality. The studio operates at the intersection of design, engineering, and manufacturing. Ryden Rizzo leads product design and form. Lanette Rizzo leads design direction, production, and client strategy. Together, they set a standard where design integrity, engineering, and performance are inseparable. Allied Maker is widely specified by leading architects and designers and continues to expand its capabilities while maintaining a singular focus: deliver artisan-crafted, highly engineered, sophisticated yet simple lighting design solutions. Salary Range Annually$95,000—$120,000 USD

Job DescriptionDescription This person will be responsible for overseeing the procurement of over 150 custom spun metal components we’ve designed over the years. We work closely with our trusted metal spinning and wood turning partners, and have sourced a network of US-based high-quality suppliers who are keeping their time-honored craft alive here in America! The Procurement Engineer will work closely with the Systems and Design Engineers to ensure part requirements are clearly and successfully communicated to our partners. Data for recommended order quantities and historical usage is all available on the company’s meticulously configured DDMRP (Demand Driven Materials Requirements Planning) system – Intiflow and Netsuite ERP. On top of analyzing data, sending emails and phone calls to partners, quoting parts, and submitting purchase orders – yxou will be a central point of contact for our design, engineering, scheduling, production, and receiving departments for all things related to the parts under your control. Key ResponsibilitiesYour responsibilities include: • Quote and Purchase parts – maintain all required inventory at “preferred stock levels”, • Maintain and improve vendor relationships, • Pursue new vendors, • Collaborate with Design and Engineering to understand part requirements, • Collaborate with Receiving department to assist with the quality control inspection process, • Collaborate with Scheduling and Production to communicate potential delivery delays or quality issues Ideal Candidate Our ideal candidate must: • Have knowledge about manufacturing practices relating to Metal Spinning and or Wood Turning, • Be excited about the entire production process, actively observing ways in which our systems can be improved to reduce error and increase efficiency, • Be a strong collaborator and organized multitasker, • Have great attention to detail while inspecting parts for defects as they are pulled for production, and able to comprehend what kinds of defects are not acceptable to the final product, • Have the ability to dive in and understand the construction of our fixtures, • Be comfortable in a role that flexes with our growing company, • Someone with attention to detail who can learn the large catalog of parts we stock, • Strong technical skills to navigate our software-based workflows Ideal CandidateOur ideal candidate must: • Have knowledge about manufacturing practices relating to Metal Spinning and or Wood Turning, • Be excited about the entire production process, actively observing ways in which our systems can be improved to reduce error and increase efficiency, • Be a strong collaborator and organized multitasker, • Have great attention to detail while inspecting parts for defects as they are pulled for production, and able to comprehend what kinds of defects are not acceptable to the final product, • Have the ability to dive in and understand the construction of our fixtures, • Be comfortable in a role that flexes with our growing company, • Someone with attention to detail who can learn the large catalog of parts we stock, • Strong technical skills to navigate our software-based workflows

Top building material company is currently seeking an Engineered Wood Products (EWP) Outside Sales Representative to help grow their market share in the Hudson Valley, NY and Long Island. The right candidate for this position is required to have at least 2 years of experience in sales. At least two

Job DescriptionAbout the Role:This is a full-time, on-site role for a Project Superintendent specializing in residential remodeling and construction. This role is based in Mamaroneck, NY. The Project Superintendent will oversee daily project operations, manage construction schedules, supervise trade professionals, monitor quality control and safety protocols, and ensure the project adheres to the established budget. Responsibilities also include resolving on-site issues, communicating daily with clients, and ensuring projects are completed efficiently, on time, and to our Architectural standards. • Strong project management skills, with the ability to manage and motivate diverse teams effectively, • Knowledge and a minimum of 5+ years of experience in residential construction is required, • Extensive knowledge in wood frame construction, • Expertise in construction safety standards and ensuring compliance on-site, • Excellent communication and interpersonal skills for managing client relationships and resolving conflicts, • Proven ability to meet deadlines in a fast-paced environment with multiple projectsAbout Us:Remodeling Consultants Inc. is a family-owned and operated business with over 60 years of experience completing high-quality home improvement projects in Westchester and Fairfield counties. We are dedicated to providing tailored solutions that respect the unique needs of every homeowner and every home. Known for our commitment to excellence, we collaborate with the most skilled Trade Professionals to ensure high-end, timely results without cost overruns. Our design-build approach includes personalized consultations and collaborative design processes to achieve total customer satisfaction. Clients can rely on us to guide them in selecting the best materials and finishes for their remodeling projects.

Carpenter - Journeyman Job Duties: • Installing foundations, walls, floors, ceilings, and roofs using materials such as: wood, steel, metal, concrete, plastics, and composites of multiple materials • Fitti

Mixed Tax Senior / Tax Advisor Location: Chester Sector: Tax, Advisory, Personal Tax, Mixed Tax, Private Client Tax Contract Type: Permanent Salary: £50,000 - £55,000 per annum Start date: 2026-06-30 Clark Wood is delighted to be working with a highly regarded independent accountancy practic