Trabajos application testing en WolverhamptonCrear alertas

Job Title: Commissioning Engineer (Test Systems) Job Type: Onsite Work Type: Permanent Hours: 37hrs per week Industry: Defence Job Location: Wolverhampton Salary: £50,000 to £55,000 per hour Job Role – Commissioning Engineer (Test Systems) Reporting to the Test Systems Design Manager the Commissioning Engineer lead the commissioning of complex, bespoke Test Equipment that supports the Qualification and Production Acceptance testing of high-performance flight control systems — including linear, servo-controlled, high-pressure hydraulic actuators. Duties – Commissioning Engineer (Test Systems) • Lead commissioning activities to deliver Test Equipment on time, on spec, and on budget, • Oversee and support mechanical and electrical assembly, interfacing with Design Engineering to resolve build issues, • Drive system integration and formal verification testing, ensuring all requirements are met and documented, • Coordinate customer validation and correlation testing, including analysis of results, • Ensure all documentation — including verification reports and ‘as built’ drawings — is complete and released, • Support calibration procedure development and facility readiness (hydraulic/electrical service integration), • Deliver end-user training and author user and maintenance manuals, • Promote and uphold Health & Safety standards throughout all commissioning activities Experience/Qualifications – Commissioning Engineer (Test Systems) • Degree in Mechanical, Electrical/Electronics, Aeronautical Engineering — or equivalent experience, • Experience in aerospace, automotive, or other complex engineering environments, • Proven experience with Test Systems or Test Equipment commissioning, • Strong diagnostic skills across hydraulic, mechanical, and electrical systems, • Familiarity with Systems Engineering principles, especially Verification and Validation Candidates who are currently a Engineer, Test Engineer, Validation Engineer, V&V Engineer, Validation and Verification Engineer, Development Engineer Technician, Systems Engineer, Test Rig Engineer, Commissioning Engineer, Test Development Engineer, Product Support Engineer and Test Design Manager could be suitable for this role. To make an application for this role please submit your CV to or for more information call 01453829529. For details of other opportunities available within your chose field please visit our website ___

Igne is looking to appoint a Geo-environmental Engineer to join our successful Geo-environmental Division based in Walsall. This is a full time position and will involve travel across the UK to undertake site work. A full UK driving license is essential to be considered for the role. This varied role involves undertaking environmental due diligence reviews, various aspects of ground engineering including preliminary risk assessments, ground investigations, geotechnical assessments, ground contamination appraisals, remedial options appraisals, remediation strategies and associated validation works. If you want to join an innovative, fast-paced and dedicated team making a difference, we would love to hear from you. Responsibilities • Preparation of preliminary risk assessment reports, • Participate in ground investigation procurement, supervision and management, • Undertaking ground investigation including trial pitting, soil and water sampling, gas monitoring and logging of soils and rock cores to relevant British Standards and Eurocodes, • Preparation of laboratory testing schedules, • Liaising with internal and external clients, contractors and other interested stakeholders, • Provide interpretation of soil and rock stratigraphy including for the purposes of foundation, earthworks and pavement design, • Interpretation of underlying strata for mine entries/workings, mineral stability, subsidence investigations and remediation, • Participate in more specialised geological projects including but not limited to determination of quarry high wall and geological slopes Qualifications • Bachelor's or Master's degree in a related subject (Geotechnical Engineering, Geology/Hydrogeology, Environmental Science or related discipline) Required Skills • Excellent written and oral communication skills and reporting abilities, • Ability to work as part of a team, • Full driving license (travel is required) Preferred Skills • Knowledge and practical experience of ground investigation and laboratory testing techniques, including logging of soil and rock core samples to relevant British Standards and Eurocodes Pay range and compensation package • £28,000 – £35,000 depending on experience, • 33 days’ holiday (inclusive of bank holidays), • Continuous training and development, • Death in service scheme About the Company We are Igne Group Limited, a synergetic amalgamation of six companies, renowned within our respective fields, with over 350 years of combined experience. We provide a one-stop-shop for pre- and post-construction services, across six service categories: ground investigation, testing, unexploded ordnance, specialist drilling, geothermal and geo-environmental. We are a Real Living Wage Employer, a Disability Confident Employer, and proud signatories of the Armed Forces Covenant. We recruit talented individuals who care about making a positive difference. We encourage colleagues to bring their whole selves to work, and equality, diversity, and inclusion (EDI) are core to our company culture and integral to our success. Please note that Igne is not able to offer visa sponsorship for this position. All applicants must have the right to work in the UK at the time of application.

We are seeking a skilled and detail‑oriented Metallurgical & Mechanical Test Technician to support component testing, quality validation and materials investigation activities within a highly technical environment. This role involves hands‑on testing, teardown activities, metallurgical analysis, and close collaboration with cross‑functional teams to ensure product quality and compliance to industry standards. Location: Wolverhampton (EMC) Contract End Date: 30/09/2026 Schedule: 39 hours per week, Monday–Friday Shift Pattern: Alternating 2‑shift rotation • Early Shift: 06:00–14:00 (Mon–Thu), 06:00–13:00 (Fri), • Late Shift: 14:00–22:00 (Mon–Thu), 13:00–20:00 (Fri) Key Responsibilities • Operate metallurgical and mechanical preparation equipment to evaluate components in line with engineering specifications and standard processes., • Conduct routine quality control testing for EDU, Battery, and Frame Assembly., • Perform teardowns of stators and frames using destructive equipment such as bandsaws., • Carry out visual weld inspection and ultrasonic testing of spot welds., • Use optical microscopes to measure welds, rivets, and assess porosity., • Perform radiographic analysis (X‑ray) of components., • Support investigations into product quality concerns alongside cross‑functional teams., • Ensure compliance with internal and external audits, including IATF 16949 and ISO 14001., • Maintain full adherence to Health & Safety standards, identifying hazards and supporting corrective actions., • Follow local laboratory documentation and practices, including 5S, Work Instructions, Autonomous Maintenance, and COSHH/Risk Assessments., • Carry out additional tasks as directed by the line manager. Skills & Experience Essential • Experienced in using preparation equipment (bandsaws, abrasive cutters, grinding, polishing, etching)., • Hands‑on experience with materials testing equipment (optical microscopes, hardness testers, tensile machines, FTIR, OES, DSC, RFU, etc.)., • Strong metallurgical knowledge of steel and aluminium and practical application experience., • Ability to interpret engineering drawings and technical specifications., • Competent computer skills, including Excel, Word and PowerPoint. Desirable • Experience interpreting X‑ray or CT‑scan imagery., • Working knowledge of MIG/TIG/CMT welding., • CSWIP weld inspection experience., • Experience using ultrasonic / PAUT equipment for spot‑weld analysis. Education & Qualifications Required • Ultrasonic / PAUT Level 2 certification., • CSWIP Visual Weld Inspector certification.

Extra Recruitment are recruiting for a Electrical Tester in the Hixon area. Details of a Test Operative To be considered for an interview, please make sure your application is full in line with the job specs as found below. Hixon ST18 Monday to Thursday 6am 4pm £12.81 p/h Immediate start Temp to perm Roles of aElectrical Tester * Testing wiring harness assemblies using automated test equipment * Identifying faults such as continuity errors, miswires or short xrnqpay circuits * Recording and documenting test results accurately * Following tec...

Fire & Compliance Engineer West Midlands | Permanent | Full Time | On-Site Take Ownership of Fire Performance in a Manufacturing Environment An established manufacturer supplying the commercial construction sector is seeking a Fire & Compliance Engineer to take technical ownership of fire, smoke and acoustic performance across its product range. This is a hands-on engineering role within a product design and manufacturing environment — not a consultancy position. You will act as the internal technical authority for fire performance, ensuring products are correctly designed, justified and supported by robust test evidence in line with British and European standards. The Role This position sits within Engineering & Quality and supports product design, certification and customer-facing technical activity. Key responsibilities include: * Leading interpretation and application of fire, smoke and acoustic standards (BS / EN / Building Regulations) * Reviewing and managing fire test reports, classifications, assessments and certification evidence * Defining correct product application and limitations of use * Supporting engineering teams with compliant, value-engineered design improvements * Acting as the technical liaison with external test houses and certification bodies * Supporting Sales and tendering teams with technically robust fire-rated solutions * Contributing to certification maintenance and continuous improvement initiatives You will play a key role in reducing ambiguity in compliance, ensuring products are engineered correctly from first principles and supported by defensible evidence. Candidate Profile * Experience working with fire-rated construction or building products (e.g. access panels, doorsets, partitions or similar passive fire systems) * Background within a fire testing environment or a product manufacturer * Strong working knowledge of: * BS 476 / EN 1634 * UK Building Regulations / Approved Document B * Assessment and extended application principles * Ability to interpret fire test evidence and translate regulatory requirements into practical engineering decisions * Degree in Fire Engineering or related discipline preferred You will be technically confident, structured in your approach and comfortable acting as the internal authority on fire performance. Why This Role Is Different * Genuine ownership of fire compliance within a manufacturing business * Direct influence over product design and development * Visible technical authority role * Long-term impact on certification robustness and engineering standards This position would suit a fire engineer currently working within a test house, certification body or manufacturer who wants to step into a broader technical ownership role within industry. Visa sponsorship is not available for this role. Applicants must already have unrestricted right to work in the UK. JBRP1_UKTJ

Are you an experienced Commissioning & Validation Engineer looking to join a long-established cleanroom company? Do you have a background in commissioning HVAC or laboratory equipment? If so, this Commissioning Engineer role could be perfect for you! Ready to make your application Please do read through the description at least once before clicking on Apply. This Commissioning & Validation Engineer position is based nationwide, primarily the Northwest, with travel to client sites required and occasional overnight stays. The role is permanent, full-time and offers a salary up to £42,000 depending on experience. As the Commissioning & Validation Engineer, youll carry out a variety of commissioning, validation and servicing activities on cleanrooms, safety cabinets, isolators, fume cupboards and HVAC systems. Youll perform tasks such as air flow and volume calculations, air change rate assessments, room differential pressure cascades, HEPA filter integrity testing and non-viable particle counting. You will report your results, liaise directly with clients and work with specialist engineers to ensure systems are operating correctly. Youll also follow risk assessments, health and safety procedures, and take responsibility for company equipment. xrnqpay You will need: Full, valid UK Driving Licence Experience with commissioning activities (full training provided) Ability and willingness to travel nationwide and stay overnight as required CSCS or IPAF qualification is desirable but not essential Enhanced DBS check will be required If you are interested in this role and think you have the skills and experience we are looking for then APPLY NOW. Alternatively, please call Tom Jones at Kingdom People on Kingdom People is acting in the capacity of a Recruitment Agency for their client.

Right across infrastructure, theres a requirement to not only maintain, but also renew and reimagine. Whatever stage youre at in your career, with us youll have an opportunity to grow and develop. Delivering essential infrastructure services for life, while being safety first, and client and customer centric in a friendly, fun and respectful environment where you are encouraged to thrive. Where will you be working? At M Group Energy, were enabling the energy essential to support our lives. We provide an end-to-end service, delivering solutions in electricity transmission, distribution, renewable energy, EV, metering and home decarbonisation. What will you be doing: We're recruiting for an Electrical Safety Compliance Advisor. Your principal duty is to provide support to all the businesses and contracts within the energy division at M Group. Ensuring all staff that work or operate on or near the various electricity networks conduct themselves in accordance with the companies and Client safety procedures to maintain Safety from the System and return home each day safely. MGroup Energy Division are a national business and travelling throughout the UK with up to several nights away is an integral part of the role (Car benefit included). A full UK driving licence is required for this role. The Energy Division Electrical Safety Compliance Advisor reports to the Divisional Electrical Safety Manager. • Ensuring all staff are assessed as competent and authorised for their assigned duties., • Management of the safety passport scheme supporting contracts in the completion of technical audits on operatives., • Acting as the assessing officer on a wide range of electrical civil disciplines:, • Substation access LV up to 400kV (Essential), • Jointing LV up to 400kV (Essential), • Electrical fitting (Essential), • Authorised persons and Senior Authorised persons (Essential), • Overhead linesman (Desirable), • Commissioning engineers (Essential), • BS7671 electricians (Desirable), • Support the wider business interest including business opportunities., • Develop and implement in association with other personnel electronic field records., • Complete electrical assurance audits on a variety of sites from DNOs to smart metering, • NEBOSH General or Construction certificate, • Previous experience as a Safety Advisor in a construction environment., • Extensive knowledge and experience of CDM Regulations, • Full driving licence and willingness to travel, • Environmental Qualifications desirable, • Consistently demonstrate high standards of safety behaviour, leading by example and promoting a positive safety culture, • Ability to manage potential conflict during site inspections with operational teams, • Capable of delivering confident articulate presentationsWhats in it for you?, • 25 days annual leave plus bank holidays, • Company Car/Salary Sacrfice Scheme/Car Allowance, • Private Health Care, • Discretionary bonus scheme, • Pension Scheme, • Life assurance, • Online GP service, 24 hours a day, 365 days a year, • Enhanced maternity, paternity leave and adoption leave JBRP1_UKTJ

Role: Electrician Hourly Rate: £16.56 per hour + additional merit of up to £4.73, overtime and testing hourly rate where applicable Role based: West Bromwich. B70 0TX Contract type: Permanent Working hours: Mon – Thurs 07.45 – 16.30, Fri 07.45 – 15.30 We are seeking an Electrician to join our fit out team in based in West Bromwich. As an Electrician you will carry out skilled installation, refurbishment and fit-out of buildings, ensuring all work is completed safely, efficiently and to the required quality standards, supporting on-time and cost-effective delivery for customers. • Maintain a safe, organised and compliant working environment, in line with health, safety and environmental standards., • Carry out refurbishment, fit-out and installation activities in line with technical specifications, SOPs, RAMS and company standards, ensuring work is completed safely and to the required quality., • Apply trade skills and experience to complete tasks independently, solving problems where possible and escalating issues when required to maintain progress., • Work to agreed refurbishment and fit-out timescales, contributing to cost-effective and efficient project delivery., • Collaborate with colleagues across the team, supporting activities outside own trade or expertise where qualified or experienced to do so., • 24 days holiday plus bank holidays, option to buy 5 days, • Contributory pension including life assurance scheme, • Fixed bonus scheme, • A range of dedicated health and wellbeing services, • A chance to give back to your community with an annual volunteering day, • Cycle to Work Scheme, • Employee Benefits Program (Discounts at 100s of shops, gyms, restaurants and even holidays!), • Opportunity for career progression We are looking for someone who has: • Experience and practical skills are gained within a specific trade., • Practical skills are developed through technical training combined with supervised hands-on application., • Industry recognised trade qualification (e.g. NVQ Level 3 or equivalent)., • Working knowledge of site, yard, refurbishment and fit-out practices, including safe systems of work., • Ability to read and interpret technical documentation such as Standard Operating Procedures (SOPs), Risk Assessments and Method Statements., • Proven ability to apply trade skills independently to deliver safe, efficient and high-quality outcomes.

Job Title: Field Application Engineer Location: UK Salary: We know salary transparency matters. While we can't list a figure on this advert, the client is genuinely flexible and open to shaping the package around the right person. Employment Type: Permanent Working Arrangement: Remote plus circa 30% travel About the Role A leading technology business is seeking a Field Application Engineer to work closely with customers, understand their technical requirements, and translate these into clear engineering specifications. You will act as the main technical contact throughout the full project lifecycle, ensuring solutions are correctly applied, integrated, and supported. Key Responsibilities • Engage with customers to understand technical and operational needs., • Translate customer requirements into detailed technical documentation., • Provide full lifecycle support from concept through integration, testing, deployment, and post‑delivery., • Assess and advise on the application of products to meet customer challenges., • Act as the primary technical liaison between customers and internal engineering teams., • Strong background in embedded systems., • Experience with VxWorks and Linux., • Proficiency in C/C++ for embedded systems/hardware, • Ability to interpret customer needs and convert them into actionable technical requirements., • Confident communicator with experience working directly with customers. JBRP1_UKTJ

Igne is seeking a Principal Geo-environmental Engineer to join our expanding Geotechnical Environmental Engineering team based in Walsall. The following information aims to provide potential candidates with a better understanding of the requirements for this role. This is an exciting opportunity for an experienced professional to take a lead role in delivering technically robust, commercially focused geo-environmental solutions across a diverse range of projects . You will lead the design and implementation of ground investigations, provide expert interpretation and risk assessment, and play a key role in mentoring and developing team members . You will have the opportunity to influence project strategy, client engagement and the development of high-quality deliverables that reflect our reputation for excellence . If you want to join an innovative, fast-paced and dedicated team who are making a difference, wed love to hear from you . Key Responsibilities: Lead the design and delivery of Preliminary Risk Assessments and Intrusive Ground Investigations, including soil and rock logging, sampling and in-situ testing. Interpret and report on geoenvironmental data, undertaking human health and groundwater risk assessments using industry-standard tools such as LCRM, ConSim, RBCA, SNIFFER, BP RISC and the EA Remedial Targets methodology. Provide clear, commercially focused advice on contaminated land and planning matters, tailored to client and project needs. Develop outline designs and specifications for contaminated land remedial works and manage detailed design of contaminated land earthworks and remediation schemes. Oversee and direct investigation and remediation of mine workings, producing associated completion reports. Manage projects effectively, from tender and proposal preparation through to delivery and client liaison. Mentor and support junior engineers, promoting technical excellence and professional development. Essential Criteria: BSc or BEng in a relevant Geological or Environmental discipline (MSc desirable). Proven track record in project management, client development and technical delivery. Extensive experience preparing contaminated land assessment reports in line with current guidance. Strong understanding of contaminated land legislation and the UK planning regime. Excellent organisational, communication and leadership skills. Full UK driving licence (UK travel required) Desirable: Postgraduate degree in a relevant discipline. Experience in geotechnical design (earthworks, foundations, retaining structures, slope stability). Salary & Benefits: Salary on offer is £42,000 • £50,000 depending on experience We operate a hybrid model (minimum 3 days in the office) 33 days holiday inclusive of bank holidays Continuous training and development Medical cashback plan Death in service scheme We are Igne Group Limited, a synergetic amalgamation of six companies, renowned within our respective fields, with over 350 years of combined experience . A one-stop-shop for pre- and post-construction services. Ignes six service categories are: ground investigation, testing, unexploded ordnance, specialist drilling, geothermal and geo-environmental . We are a Real Living Wage Employer, a Disability Confident Employer and signatories of the Armed Forces Covenant; we recruit talented individuals who care about making a positive difference . We want colleagues to bring their whole selves to work and to be able to be themselves, so equality, diversity and inclusion (EDI) are core to our company culture and integral to the success of our business . We believe in the development of our talent, which is why at Igne, you will have many opportunities for training and development within your role . Please note Igne is not able to offer visa sponsorship for this position. xrnqpay All applicants must have the right to work in the UK at the time of application.

Applied Psychologist - FT Wolverhampton Job overview Are you an enthusiastic and values-drivenApplied Psychologistlooking to grow your clinical skills within a supportive and innovative service? We are delighted to invite applications for a Band 7 role within our expanding multidisciplinary team. We welcome applications fromClinical, Counselling, or Forensic Psychologists, includingnewly qualifiedpractitioners or those due to qualify soon. As part of our team, you will: ? Provide high-quality psychological assessment, formulation and intervention for service users with complex mental health needs ? Contribute to MDT discussions, offering psychologically informed perspectives ? Have access to excellent supervision structures, reflective practice, and CPD opportunities ? Be part of a friendly, skilled, compassionate team where your ideas and development really matter ? Shape service improvement initiatives and contribute to a culture of learning and innovation We are committed to helping you develop your specialist areas of interest and offer genuine career progression opportunities. Main duties of the job We are seeking someone who is: • Passionate about delivering evidence-based psychological care, • Skilled in trauma-informed, compassionate, and formulation-led practice, • Confident in working autonomously, while also valuing teamwork, • Committed to equality, diversity, and inclusion A wide range of NHS staff discounts • Health and wellbeing resources, • Local and national benefits as part of the wider NHS employment offer Provides specialist psychological assessment of clients with complex conditions based on the appropriate use, interpretation and integration of data from a variety of sources, which may include neuropsychological testing. Responsible for recognising the potential for or signs of client harm, abuse or neglect, including poor clinical practice, reporting all such concerns and taking all reasonable steps to protect the client. Responsible for identifying and reporting concerns regarding the safeguarding of children who may be at risk. Undertakes risk assessment and risk management for individual clients and provides specialist advice to other professionals on psychological aspects of risk assessment and risk management. Formulates plans for specialist psychological therapy and/or management of clients mental health/learning conditions based upon an appropriate conceptual framework and evidence-based practice. Negotiates the implementation of such plans with clients and/or their carers. Implements a range of specialist psychological therapies for individual clients, carers, families and groups, adjusting and refining psychological formulations as required. Evaluates therapy options and makes decisions about treatment. To liaise with other professionals working within the NHS, Social Inclusion and Health and the voluntary sector on matters relating to client care that have implications for the service Supervisory/Professional Responsibility Clinical supervision of Assistant Psychologists under the guidance of their Applied Psychologist line manager. Will hold responsibility and accountability for their own actions, ensuring appropriate support and supervision is sought when required. To keep abreast of current developments in this field through reading, attendance at appropriate training courses, and a range of other CPD activities, and to ensure that a log is kept of this in line with Psychology and Counselling service and HPC requirements. Multi-Disciplinary Training and Development Provides psychological advice, guidance and consultation to other direct care staff in MDT. Provides clinical supervision to other direct care staff in MDT. Provides training to other staff in MDT under the guidance of a more senior Applied Psychologist. Service and Organisational Development Participate in CQUIN and QIP projects, NICE benchmarking and compliance requirements as required within MDT Service Redesign and Cultural Change Bring an understanding of psychological change processes to own role within MDT Service Evaluation and Research Participate in clinical audits as required within MDT Undertake service evaluation and research in MDT Person specificationEssentialEssential criteria • Post-graduate doctoral level training (or its equivlanet) in Applied Psychology as accredited by the BPS including models of psychopathology, clinical psychometrics and neuropsychology, two or more distinct psychological therapies and lifespan developmental psychology., • HCPC registration as an Applied Psychologist, • Must have experience/interest in: Working with and assessing children, young people and their families with complex mental health difficulties and neurodevelopmental conditions, • Risk assessment and risk management, • Adapt creatively the evidence base for interventions relevant to child and adolescent mental health, • Work effectively as part of a multidisciplinary team and undertake care co-ordination/lead practitioner responsibilitiesDesirable criteria JBRP1_UKTJ

We're looking for a dynamic IT Application Project Manager to lead the delivery of application projects across the Actuation Systems Group. This role sits at the intersection of IT governance, risk management, and structured testing, operating within a regulated aerospace environment where control,

Job Title: Commissioning Technician (Test Systems) Job Type: Onsite Work Type: Permanent Hours: 37hrs per week Industry: Defence Job Location: Wolverhampton Salary: £40,000 to £45,000 per hour Job Role – Commissioning Technician (Test Systems) Reporting to the Test Systems Design Manager the Commissioning Technician shall work closely with our Test Systems Design team to integrate, verify, and validate complex machinery comprising mechanical, electrical, electronic, software, and power distribution components. Duties – Commissioning Technician (Test Systems) • Commission new Test Equipment in line with technical requirements, schedule, and budget expectations • Support mechanical and electrical assembly, acting as a key interface between build teams and Design Engineering • Lead integration and formal verification testing, resolving non-conformances and ensuring full requirement coverage • Facilitate customer validation and correlation testing activities • Annotate part and assembly drawings to reflect ‘as built’ condition and contribute to verification documentation • Independently troubleshoot hydraulic, mechanical, and electrical systems using schematics and diagnostic tools • Support calibration procedure development and facility readiness (hydraulic/electrical service integration) • Champion Health & Safety practices throughout all commissioning activities Experience/Qualifications – Commissioning Technician (Test Systems) • HNC/HND or equivalent in Electronics or Mechanical Engineering • Experience in aerospace, automotive, or other complex engineering environments • Ability to interpret and troubleshoot from electrical and hydraulic schematics Candidates who are currently a Technician, Mechanical Technician, Electronic Technician, Electrical Technician, Commissioning Engineer, Installation Technician, Service Technician, Service Engineer, Test Technician and Test Engineer could be suitable for this role. To make an application for this role please submit your CV to (url removed) or for more information call (phone number removed). For details of other opportunities available within your chose field please visit our website (url removed) Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors

Lab Technician 6-month initial contract Based in Wolverhampton (onsite working) £21 per hour (Inside IR35), 39 hrs pw About the company I am currently recruiting on behalf of an automotive OEM, based in Wolverhampton, who are looking for a Lab Technician to join their team. Job Description As Lab Technician, your main responsibilities will include: Use metallurgical & mechanical prep & test equipment, to assess components Carry out routine quality control testing for EDU, Battery and Frame Assembly Perform teardowns of stators and frames, using destructive equipment, e.g. Bandsaws. Perform visual weld inspection testing and ultrasonic testing of spot welds. Use optical microscopes to measure welds, rivets and porosity content. Qualifications/Skills needed: Prep equipment (e.g. bandsaws, abrasive cutters, grinding, polishing, etching). Materials testing equipment (optical microscopes, hardness, tensile, composition). Metallurgical knowledge of steel and aluminium, and experience in applying. Able to interpret Engineering drawings and Specifications. Minimum level 3 qualification in a relevant engineering, science or welding field. Welding (pref.) Why work through Contechs? Contechs is a leading Automotive, Design, Engineering, Technology and Innovation Recruitment Consultancy. Founded in 1997, with an inhouse Contractor Care Team to support all external employees, acts as an employment agency for permanent and contract recruitment. How to Apply If you're interested in applying for this position, submit your application and one of our recruiters will be in touch. If you know anyone that is suitable for the role, please visit the below page where we offer up to £600 referral fee

About the Company ASD Ltd is one of the leading metal stockholders and processing suppliers in the UK. We are renowned for supplying a diverse range of ferrous and non-ferrous products. Our extensive in-house processing portfolio in combination with our expertise enables us to deliver cost efficient metal solutions and high-quality steel products. We are passionate about sustainability and aim to transform our industry by playing an active role in building a sustainable future for our employees, customers, community and future generations. Role Overview You will be responsible for producing accurate technical drawings and models for structural steel projects. Working closely with engineers, project managers and fabrication teams, you will ensure designs are practical, compliant, and ready for production. Key Responsibilities Interpret engineering drawings, specifications and project requirements. Prepare accurate estimates based around company pricing structure. Ability to create customer orders into an accurate production workflow. Liaise with sales, production, and fellow estimators to ensure part accuracy. Understanding of drawing control based on revisions etc. Ensure drawings comply with relevant standards and company procedures. Support customer requirements from concept through to delivery. Ability to draw in 2D CAD. Requirements Experience using 2D CAD software, preferably SIGMANEST. Ability to read and interpret technical and engineering drawings. Strong attention to detail and accuracy. Good communication and teamwork skills. Understanding of engineering file types. e.g, DWG, DXF, NC1, etc. Knowledge of nesting for flat bed lasers and waterjet machinery. Ability to optimise material yield based around workflow. Desirable Skills Knowledge of ferrous / non-ferrous materials, grades and applications. Knowledge of SAP systems particularly production transactions. Knowledge of 2D development of parts suitable for press breaking. Relevant qualification in Engineering, Design or CAD (preferred but not essential with experience). Knowledge of how material processing production works. What we offer: As well as a competitive salary we also offer an attractive benefits package which includes: Life assurance Contributory pension (5% contribution matched by the company) Discount cards for shops and restaurants Gym and health club discounts Holiday trading Cycle to work scheme Medicash (healthcare) programme Employee assistance programme Lifetime financial wellbeing Please note, due to the safety critical nature of our business, we carry out drug and alcohol testing, both pre employment and throughout employment. We have a zero tolerance approach. How to Apply Please ensure you attach an up to date CV to your online application

Job Title: Commissioning Engineer (Test Systems) Job Type: Onsite Work Type: Permanent Hours: 37hrs per week Industry: Defence Job Location: Wolverhampton Salary: £50,000 to £55,000 per hour Job Role – Commissioning Engineer (Test Systems) Reporting to the Test Systems Design Manager the Commissioning Engineer lead the commissioning of complex, bespoke Test Equipment that supports the Qualification and Production Acceptance testing of high-performance flight control systems — including linear, servo-controlled, high-pressure hydraulic actuators. Duties – Commissioning Engineer (Test Systems) • Lead commissioning activities to deliver Test Equipment on time, on spec, and on budget • Oversee and support mechanical and electrical assembly, interfacing with Design Engineering to resolve build issues • Drive system integration and formal verification testing, ensuring all requirements are met and documented • Coordinate customer validation and correlation testing, including analysis of results • Ensure all documentation — including verification reports and ‘as built’ drawings — is complete and released • Support calibration procedure development and facility readiness (hydraulic/electrical service integration) • Deliver end-user training and author user and maintenance manuals • Promote and uphold Health & Safety standards throughout all commissioning activities Experience/Qualifications – Commissioning Engineer (Test Systems) • Degree in Mechanical, Electrical/Electronics, Aeronautical Engineering — or equivalent experience • Experience in aerospace, automotive, or other complex engineering environments • Proven experience with Test Systems or Test Equipment commissioning • Strong diagnostic skills across hydraulic, mechanical, and electrical systems • Familiarity with Systems Engineering principles, especially Verification and Validation Candidates who are currently a Engineer, Test Engineer, Validation Engineer, V&V Engineer, Validation and Verification Engineer, Development Engineer Technician, Systems Engineer, Test Rig Engineer, Commissioning Engineer, Test Development Engineer, Product Support Engineer and Test Design Manager could be suitable for this role. To make an application for this role please submit your CV to (url removed) or for more information call (phone number removed). For details of other opportunities available within your chose field please visit our website (url removed) Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors

We are seeking a skilled and detail‑oriented Metallurgical & Mechanical Test Technician to support component testing, quality validation and materials investigation activities within a highly technical environment. This role involves hands‑on testing, teardown activities, metallurgical analysis, and close collaboration with cross‑functional teams to ensure product quality and compliance to industry standards. Location: Wolverhampton (EMC) Contract End Date: 30/09/2026 Schedule: 39 hours per week, Monday-Friday Shift Pattern: Alternating 2‑shift rotation Early Shift: 06:00-14:00 (Mon-Thu), 06:00-13:00 (Fri) Late Shift: 14:00-22:00 (Mon-Thu), 13:00-20:00 (Fri)Key Responsibilities Operate metallurgical and mechanical preparation equipment to evaluate components in line with engineering specifications and standard processes. Conduct routine quality control testing for EDU, Battery, and Frame Assembly. Perform teardowns of stators and frames using destructive equipment such as bandsaws. Carry out visual weld inspection and ultrasonic testing of spot welds. Use optical microscopes to measure welds, rivets, and assess porosity. Perform radiographic analysis (X‑ray) of components. Support investigations into product quality concerns alongside cross‑functional teams. Ensure compliance with internal and external audits, including IATF 16949 and ISO 14001. Maintain full adherence to Health & Safety standards, identifying hazards and supporting corrective actions. Follow local laboratory documentation and practices, including 5S, Work Instructions, Autonomous Maintenance, and COSHH/Risk Assessments. Carry out additional tasks as directed by the line manager.Skills & Experience Essential Experienced in using preparation equipment (bandsaws, abrasive cutters, grinding, polishing, etching). Hands‑on experience with materials testing equipment (optical microscopes, hardness testers, tensile machines, FTIR, OES, DSC, RFU, etc.). Strong metallurgical knowledge of steel and aluminium and practical application experience. Ability to interpret engineering drawings and technical specifications. Competent computer skills, including Excel, Word and PowerPoint.Desirable Experience interpreting X‑ray or CT‑scan imagery. Working knowledge of MIG/TIG/CMT welding. CSWIP weld inspection experience. Experience using ultrasonic / PAUT equipment for spot‑weld analysis.Education & Qualifications Required Minimum Level 3 qualification in Engineering, Science, Welding, or a related technical field.Desirable Ultrasonic / PAUT Level 2 certification. CSWIP Visual Weld Inspector certification

Immediate opportunities exist for skilled Sheet Metal Workers, Fitters, or Welders, looking to get an opportunity to work within a prestigious Aerospace Engineering company in the West Midlands? The company has a fantastic culture, the environment is modern and clean, and there is regular overtime available, paid at enhanced rates. The ability to achieve weekly gross pay values of £900-£1,500 is very possible. Contracting positions will start as a minimum 6 month term, with some contracting roles becoming permanent at a future stage, based on performance and attitude, and not on a 'first-in' basis. The work is due to go on for multiple years. Travel expenses will be considered for contractors living more than an hour and a half away from the work site, if the intention is to stay in local accommodation. Position summary: The role involves the assembly and testing of light alloy and non-light alloy heat exchangers. Intricate work, this also includes preparing heat exchangers for chemical conversion and final fitting. The candidate must be prepared to work shifts and will report directly to the Team Leader. Responsibilities: Fitting for welding shrinkage Produce weld preps etc. Adhere to technical specifications Read and understand engineering drawings and mark out where required. Minimum Requirements: 1. Ideal candidate will be apprentice trained; time served with City & Guilds or equivalent qualification 2. Previous experience of Sheet Metal Working 3. Teamwork 4. Communication Skills 5. Support ACE activities (5S, TPM, Turnbacks, Clinic) 6. Basic SAP knowledge would be advantageous 7. Willingness to be flexible and adaptable 8. Previous experience of working in an aerospace environment would be advantageous Umbrella and standard PAYE options available to suit with regular overtime available. Advertised rates are umbrella values. If this sounds like you, please respond to this advert with an updated version of your CV and call 01902 21 27 58 to discuss in more detail. This position may involve access to export controlled information and hardware where an export license would be required for compliance with applicable laws and regulations. Employment will be subject to satisfactory security checks, export license approval, and if required, completion of a non-disclosure agreement. Inside Right is acting as an employment business on behalf of a client partner. If you have not had a response to your application within 2 weeks, you may have been unsuccessful on this occasion. Skills Required Previous experience of Sheet Metal Working Welding TIG Welding Teamwork Communication Skills Support ACE activities (5S, TPM, Turnbacks, Clinic) Basic SAP knowledge would be advantageous Willingness to be flexible and adaptable Previous experience of working in an aerospace environment would be advantageous Qualifications Required Ideal candidate will be apprentice trained; time served with City & Guilds or equivalent qualification Keywords Sheet metal Fitter Testing Air tools Hand tools TIG Weld Welding Aerospace Tolerance TPBN1_UKTJ