Trabajos assembly line en WesthoughtonCrear alertas

What Youll Be Doing Electrical assembly, wiring, soldering, and termination to drawings and build instructions Certifying your own work in line with product certification and quality procedures Using hand tools, jigs, fixtures, and electrical measuring equipment Carrying out self checks and inspecti

World Class Defence Organisation based in Bolton is currently looking to recruit an Electrical Wiring Operator on an initial 12 month contract and then ongoing and long-term thereafter. Contract Duration: 12 Months (initially and then ongoing thereafter) Hourly Rate: Hourly Rate: £28.35ph for the first 12 weeks and then £29.70 after week 12 (Umbrella). Overtime Rates of 'time and a half' for all hours worked over 37 hours per week. Electrical Wiring Operator Job Description: An exciting opportunity for a Skilled Electrical Wiring Operator to join our Calibration and Maintenance team for a 12-month period in a fast-paced but friendly and inclusive Manufacturing environment. We are seeking a Skilled Wire Operator to join our Calibration & Maintenance Team, to fault diagnose and repair bespoke cabling to drawing specifications. Fault finding and subsequent repair of cable assemblies. Carry out surface mount repair on CCAs. Maintain and repair test/measuring equipment to component level. PAT testing across the manufacturing site. Interrogate drawings during fault finding activities. Safety systems testing of Test & Measuring equipment in line with documented procedures. Provide Technical support to facilitate the efficient servicing of STTE to enable production testing of hardware and repair phases of the contract. Maintain excellent workspace husbandry disciplines. Maintain a high degree of tool control and FOD practices. Assist with maintenance of manufacturing aids as and when required. What we're looking for from you: All three of the below are required: Electrical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) Electrical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.) Electrical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achieved IPC 620 & Dynamic Cabling certified/ trained preferred. Possess experience in electrical wiring and assembly. Previous experience in the aerospace or defence industry would be desirable

Job Title: Production Operative Location: Farnworth, Bolton, BL4 0AN Salary: Starting at £12.71 per hour Job Type: Full time, Permanent Working Hours: 07:30 to 16:00 Monday to Thursday 07:30 to 12:50 Friday (38 hours per week) About Us: As one of the UK's leading heating element manufacturers, Backer Heatrod offer a wide range of products from standard straight elements through to customer bespoke equipment. Our success is built on our ability to satisfy our customers by providing quality products, outstanding customer service and delivering on time every time! We combine a growing industrial manufacturing base with a thriving distribution business. About the Role: We are seeking a reliable and hardworking Production Operative to join our manufacturing team specializing in the production of heating elements. This is a hands-on role in a fast-paced environment where precision and quality are key. You'll be part of a dedicated team assembling components into finished units used in a wide range of heating applications. It's essential that you have experience in a manufacturing environment. Key Responsibilities: Following our standard operating procedures, assemble components following technical drawings and specifications Work alongside the team in ensuring that production plan is met on a daily/weekly and monthly basis Conduct inline quality checks through the process to ensure products meet required standards Maintain a clean and safe working environment Report any faults or issues to our technicians/production manager Follow health and safety procedures at all timesWhat We're Looking for: Experience in a manufacturing environment Some experience in hot works is desirable - e.g. soldering/brazing and welding Good attention to detail and manual dexterity Demonstrable experience reading engineering drawings and using measuring equipment Ability to follow instructions and work as part of a team Willingness to learn and take on new tasks Good IT skills Basic understanding of health and safety practicesWhat We Offer: Full training and support Opportunities for career progression Friendly and inclusive working environment Company pension scheme On-site parkingPlease Note: No agencies. Please click the APPLY button to send your CV and Cover Letter for this role. Candidates with the relevant experience or job titles of: Manufacturing Operative, Manufacturing Engineer, Assembly Technician, Production Operative, Production Technician, Process Operator, Production Engineer, Assembly Operative, Assembly Line Operator, Process Operative, Manufacturing Operator, Production Operator, Production Coordinator may all be considered

Pay: Up to £35,685.85 per year Job Description: Job Description: steel door assembler To re-assemble doors and products with hardware, components and materials supplied from stock. To fit custom parts using hand tools and associated equipment. Finish doors and products to a standard acceptable for final delivery to end user. Pack finished products for delivery. Responsibilities & Duties: steel door assembler • To re-assemble doors and products to drawings using stock parts and materials including fitting of insulation materials. steel door assembler • Fit custom parts using hand tools., • Finish doors and products to a standard acceptable for final delivery to end user., • Complete product documentation in line with project requirements., • Assist with manual handling operations when necessary., • Maintain a clean and tidy workplace and report any potential risks or hazards to supervisors., • Any other ad hoc duties as may be required, and as commensurate with the grade of post. Qualifications, Knowledge, Experience & Skills: steel door assembler Essential • Experience of working with small hand tools and measuring equipment, • Good time management skills, • Adhere to health and safety standards, • Ability to follow fitting instructions, standard operating procedures and general assembly drawings, • Ability to work with minimal supervision, within the re-assembly team Desirable • Experience of steel door manufacture or similar, • Working knowledge of door hardware and locking systems., • Knowledge of continuous improvement methodology, • FLT driving with appropriate licence. Company benefits- steel door assembler 4 or 5-day working patterns 25 days annual leave + bank holidays Service days Professional membership Free fruit, tea and coffee On-site parking Pension (5% salary sacrifice) Life assurance Healthcare package Company sickness scheme Mental health first aiders Occupational health support Free eye tests and contribution to glasses Benefits: • Company pension, • Health & wellbeing programme, • Life insurance, • Sick pay Ability to commute/relocate: • Bolton, Greater Manchester: reliably commute or plan to relocate before starting work (preferred) Experience: • Assembling steel doors or experience doing similar: 1 year (preferred), • using hand tools: 1 year (preferred) Work authorisation: • United Kingdom

Electrical Fitter Bolton 12 Month Contract Oportunity for a Time Served Electrical Fitter to join our clients electrical manufacturing department. You will play a key role in the build, assembly, and certification of mission-critical products. The Role As an Electrical Fitter, you will be responsible for the end-to-end manufacturing and testing of electrical components. You won’t just be building; you will be the guardian of quality, certifying your own work and ensuring every product meets rigorous industry standards. Key Responsibilities Perform complex electrical wiring and assembly tasks in accordance with defined workmanship standards. Take ownership of quality by certifying your own work in line with company procedures and maintaining approvals through regular audits. Utilize a wide range of tools, equipment, and measuring instruments to meet precise build and test specifications. Ensure all manufacturing data packs and paperwork are completed accurately while meeting strict project timescales and budgets. Contribute to a safe, clean, and efficient working environment through proactive process improvement suggestions. To be successful in this role, you must hold a formal qualification via one of the following routes: Approved Apprenticeship Framework (Modern/Standard). City & Guilds Parts 1, 2 & 3 (with associated Vocational Units/Further Education). NVQ Level 3 / BTEC ONC/HNC in a relevant electrical discipline. Desirable Skills: IPC 610 certification or training (Highly Preferred). Previous experience within the Aerospace or Defence industry. Certified training in Manual Handling, Lifting & Slinging (including overhead cranes), and ESD protocols. Please note that security checks will be carried out prior to the start date

Manufacturing Technician Location Bolton Salary £35,685.85 per annum (£18.48 per hour) Job Type Full-time, Permanent Working Hours 37 hours per week across 4 days Monday to Thursday Overtime available during busy periods About the Role We are currently recruiting for a Manufacturing Technician to join a busy and growing operations team. This hands-on role involves re-assembling doors and related products using supplied hardware, components, and materials, ensuring all finished products meet quality standards before delivery. This Manufacturing Technician opportunity would suit someone with assembly or manufacturing experience who enjoys practical work and takes pride in producing high-quality finished products. Key Responsibilities • Re-assemble doors and products in line with technical drawings and fitting instructions, • Fit custom parts using hand tools and associated equipment, • Install insulation materials and stock components where required, • Complete finishing work to a high standard ready for final delivery, • Accurately complete product and project documentation, • Assist with manual handling duties when required, • Maintain a clean, safe, and organised working environment, • Follow all health and safety procedures and company standards, • Support the wider operations team with additional duties as required Essential Skills & Experience • Experience using small hand tools and measuring equipment, • Ability to read and follow assembly drawings and fitting instructions, • Good time management and organisational skills, • Strong awareness of health and safety procedures, • Ability to work independently and as part of a team with minimal supervision Desirable Skills • Experience within steel door manufacturing or a similar environment, • Knowledge of door hardware and locking systems, • Understanding of continuous improvement methods, • FLT licence and driving experience What’s on Offer • Competitive salary and hourly rate, • 4-day working week, • Overtime opportunities available, • Stable, long-term opportunity, • Supportive team environment, • Opportunity to develop skills within manufacturing and assembly operations If you feel you have the relevant skills and experience for the Manufacturing Technician role, please apply with your latest CV for consideration. Please note: This is a UK permanent role, and candidates will require existing eligibility to work in the UK to be considered for this role

An exciting opportunity for an experienced Electrical Test Operator to join our Manufacturing Operations team in a fast-paced but friendly and inclusive Manufacturing environment. Salary: £42,558 Dynamic (hybrid) working: 5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking. Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more.The opportunity: This opportunity is for an Electrical Test Operator to join the Manufacturing team supporting test and certification of a variety of electrical hardware builds, ranging from small fixtures through to complex missile systems, during all phases of the product lifecycle. You will be providing operations support to ensure programme targets are met to agreed time, cost and quality requirements. Ensuring that completed hardware builds are tested in accordance with drawing requirements and specifications; Maintaining a safe working environment in-line with 5S policies Always aiming to deliver in line with all time, cost and quality requirements Ensuring assembly unit production costs are met Maintaining, to the highest level, workmanship standards and product quality Ensuring the completion of all manufacturing documentation Working closely with fellow Operators, Engineering and Quality to overcome any technical challenges and offer feedback for continuous improvement activitiesYou will be working with a large team of multi-disciplined operators in a fast-paced but friendly and inclusive Manufacturing environment. The team has a great mix of people, ranging from apprentices through to experienced skilled technicians, all striving to deliver technical excellence across a number of different missile systems in development and production. What we're looking for from you: Qualifications required (all of the below): Electrical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) Electrical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.) Electrical Engineering / Manufacturing Level 3 vocational qualification (NVQ) Practiced in reading and understanding assembly drawings and planning instructions Fully conversant with all Manufacturing equipment, tools and measuring instruments Uses their initiative and can work without close supervision Goes 'the extra mile' to get work finished to a high standard Flexibility and adaptabilityOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDAUK), Instagram (MBDAUK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

An opportunity has arisen for an experienced Manufacturing Electronics Engineer to join our manufacturing team in Bolton. Fantastic opportunity to support across all stages of product assembly Salary: Circa £45,000 depending on experience Dynamic (hybrid) working: 5 days per week on-site due to workload classification Security Clearance: British Citizen Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: We are seeking an Electronics Engineer to service Electrical and Electronic Test Equipment, including Special to Type Test Equipment (STTE).The work is extremely varied, interesting and challenging. You will be joining a dynamic and focussed team, responsible for the support of the manufacturing function across all stages of product assembly integration and test. The team are self-motivated and work directly with support functions and engineers across MBDA to resolve routine and non-routine tasks arising within the business. These tasks include supporting routine calibrations, commissioning, drift analysis, fault finding and repair of test equipment. You will be working within an experienced team of Engineers supporting complex test platforms in the manufacture and test of complex missile systems. You will be trained to calibrate and support special to type factory test equipment using a range of technologies, DC to Microwave. Annual reviews assess and plan any future development opportunities and needs to widen your overall engineering knowledge. Teamwork and knowledge sharing is an essential part of the team ethos as is the understanding of workload and throughput achievements. What we're looking for from you: HNC/HND with relevant experience Experience and knowledge in the calibration of test equipment and maintenance of test systems to component level. Able to utilise instructions, handbooks, drawings or specifications to provide technical advice/guidance. Able to use this information to conduct appropriate measurements and repairs down to component level. Good understanding of calibration principles and processes. Able to mentor other or more junior staff when requested by line manager. Able to deal with multiple issues, tasks and priorities concurrently. Analytical and problem solving skills. Good communication skills with the ability to tailor communication to the relevant audience. A good understanding of SAP would be desirable. Experience of working on Environmental Chambers an advantage.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDAUK), Instagram (MBDAUK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

World Class Defence Organisation based in Bolton is currently looking to recruit a Goods Inwards Inspector Subcontractor on an initial 12 month contract. Contract Duration: 12 Months (initially and then ongoing thereafter) Hourly Rate: £28.35ph rising to £29.70ph after 12 weeks (Umbrella). Overtime: hours worked over 37 hours per week is paid at time and a half. Goods Inwards Inspector Job Description: The role of the Goods Inwards Inspector is to ensure that goods received from suppliers meet the criteria of the purchase order and are compliant in all respects. Verify and accept procured product in line with contractual conditions. Practiced in reading and understanding assembly drawings with due regards to dimensional tolerances and machined. Examining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc. Undertaking first off inspections. Produce relevant inspection/quality control documentation. Check and complete all paperwork associated with the delivered article. Ensure inspections times are met. Control defect items via segregation from good product. Raise and maintain relevant defect reports. Maintain product verification approval process via regular audits. Inspection of PCB Ensure compliance with all associated procedures applicable to the manufacturing process. Maintain to the highest level, workmanship standards and product quality. Contribute to the maintenance of an orderly and safe working environment. Skillset/experience required: The successful candidate should be a team player who is able to demonstrate customer focus. They should be adaptable to any work-related processes and working practices. Goods Inwards Inspection / Quality Inspection background Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 or HNC. Formal further education certificate to HNC or equivalent certificate. SAP literate is desirable

Mechanical Assembly Fitter. To re-assemble doors and products with hardware, components and materials supplied from stock. To fit custom parts using hand tools and associated equipment. Finish doors and products to a standard acceptable for final delivery to end user. Pack finished products for delivery. Responsibilities & Duties: To re-assemble doors and products to drawings using stock parts and materials including fitting of insulation materials. Fit custom parts using hand tools. Finish doors and products to a standard acceptable for final delivery to end user. Complete product documentation in line with project requirements. Assist with manual handling operations when necessary. Maintain a clean and tidy workplace and report any potential risks or hazards to supervisors. Any other ad hoc duties as may be required, and as commensurate with the grade of post. Qualifications, Knowledge, Experience & Skills: Essential Experience of working with small hand tools and measuring equipment Good time management skills Adhere to health and safety standards Ability to follow fitting instructions, standard operating procedures and general assembly drawings Ability to work with minimal supervision, within the re-assembly team Desirable Experience of steel door manufacture or similar Working knowledge of door hardware and locking systems. Knowledge of continuous improvement methodology FLT driving with appropriate licence. Hours of Work: 4 days per week Mon – Thurs. 06.30 - 16.15. 37 hours on the shop floor (overtime available when busy) Salary £35,685.85 - £18.48 per hour Excellent benefits package

Our client has an opportunity for a Mechanical Engineer to join their Calibration and Maintenance Team. You will be joining a dynamic and focussed team, responsible for the support of the manufacturing function across all stages of product assembly integration and test. The team are self-motivated and work directly with support functions and engineers across MBDA to resolve routine and non-routine tasks arising within the business. Role: Mechanical Engineer Location: Bolton, fully onsite Hours: 37 per week Hourly Rate: £32-£35 per hour via Umbrella, inside IR35 Clearance: SC required before starting What you'll be doing: The main aspects of the role will be as technical support for the metrology department supporting COTS (commercial of the shelf) equipment and STTE (Special to type test equipment) calibration and maintenance. You will be required to assist production with technical queries on fixtures and tooling along with supporting CMM (Co-ordinate measuring machine) inspection work. You will be required to guide operators on best practice within the metrology department on day-to-day technical queries alongside looking at ways to improve process and measurement techniques within the department. You will also give technical support for mechanical calibration such as high/low pressure & temperature calibrations. Requirements: Minimum qualification: HNC in Mechanical Engineering. Experience and knowledge of calibrating torque tools to ISO 6789-2:2017 required. Good knowledge of Geometric Dimensioning & Tolerancing (GD&T) required. Experience and knowledge in dimensional calibration required Experience and knowledge of using and creating programs for coordinate measuring machine required. Good knowledge of temperature and pressure calibration desirable Able to deal with multiple issues, tasks and priorities concurrently.If you are interested in applying for this position and you meet the requirements, please apply immediately! Line Up Aviation is a specialist aviation and aerospace recruitment company that has been operating all over the world for more than 30 years. We work with some of the industry's best-known companies and pride ourselves with working to the highest standard of service supported by an ingrained culture of honesty and integrity. "Follow @LineUpAviation on Twitter for all our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at any time! Thank you for your follow

Role: Re-Assembly Operator Location: Bolton Rate per Hour: £18.48 Working Days: Monday to Thursday Working Hours: 37 per week Job Description: To re-assemble doors and products with hardware, components and materials supplied from stock. To fit custom parts using hand tools and associated equipment. Finish doors and products to a standard acceptable for final delivery to end user. Pack finished products for delivery. Responsibilities & Duties: • To re-assemble doors and products to drawings using stock parts and materials including fitting of insulation materials. • Fit custom parts using hand tools. • Finish doors and products to a standard acceptable for final delivery to end user. • Complete product documentation in line with project requirements. • Assist with manual handling operations when necessary. • Maintain a clean and tidy workplace and report any potential risks or hazards to supervisors. • Any other ad hoc duties as may be required, and as commensurate with the grade of post. Qualifications, Knowledge, Experience & Skills: Essential • Experience of working with small hand tools and measuring equipment • Good time management skills • Adhere to health and safety standards • Ability to follow fitting instructions, standard operating procedures and general assembly drawings • Ability to work with minimal supervision, within the re-assembly team Desirable • Experience of steel door manufacture or similar • Working knowledge of door hardware and locking systems. • Knowledge of continuous improvement methodology • FLT driving with appropriate licence. **You must have the full right to work in the UK without the need for sponsorship, both now, and in the future

World Class Defence Organisation based in Bolton is currently looking to recruit an Electrical Inspector Subcontractor on an initial 12 month contract. Experience with inspecting the work of other people is essential. Job Title: Electrical Inspector Rate: £28.35 rising to £29.70 after 12 weeks Location: Bolton Hybrid / Remote working: Onsite. Standard Days, not shift work Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week are paid at ‘time and a half’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella) Electrical Inspector Job Description: Responsible for all elements necessary to achieve and maintain the quality of deliverable hardware. Certification of product in line with processes and procedures. Examining for correct assembly including verifying all forms of electrical connections. Examining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc. Inspect for physical damage. Intermediate inspection checks for non-Product Certification activities. Monitoring of operators within the Product Certification Scheme. Check, complete and certify all paperwork associated with the manufacturing data pack. Control of non-conforming items. Raise and maintain relevant data records/non-conformance reports. Produce relevant inspection/quality control documentation/history sheets. Care for and use specialised inspection tools. Maintain product certification and approval via regular audits. Ensure compliance with all associated procedures applicable to the manufacturing process. Ensure inspection times are met. Possess a versatile skill base with the capability to apply these skills across a range of tasks. Maintain to the highest level, workmanship standards and product quality. Willing to contribute to an environment of process improvement. Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21or HNC. Several years, experience as a skilled person. IPC 610 & IPC 620 certified / trained preferred. Manual handling training. ESD Training. No colour blindness. Role requirements (skills, training and qualifications) Electrical apprenticeship to one of the following levels Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3 Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3Vocational NVQ3 with Further Education, BTEC ONC/HNC

An opportunity has arisen with my client for an Electrical Fitter to join them on a 12-month contract. As the Electrical Fitter you will be responsible for carrying out manufacturing and test tasks within the electrical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Role: Electrical Fitter Pay: £28.35 per hour via umbrella (rising to £29.70 per hour after 12 weeks) Location: Bolton Contract: 12 Months Hours: Monday - Friday, 37 hours per week Security Clearance: BPSS Responsibilities: Certify the product in line with Product Certification procedure. Demonstrated ability / willingness to certify own work in line with company quality standards. Maintain product certification and approval via regular audits. Possess a versatile skill base with the capability to apply these skills across a range of tasks. Be fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle. Ensure manufacturing build, inspection and where relevant test times are met. Check and complete all paperwork associated with the manufacturing data pack. Maintain to the highest level, workmanship standards and product quality. Ensure compliance with all associated procedures applicable to the manufacturing process. Maintain a safe working environment. Maintain a good housekeeping policy. Willing to contribute to an environment of process improvement Education/Qualifications Approved Apprenticeship/Apprenticeship Framework/Modern ApprenticeshipOR Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3OR Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3OR Vocational NVQ3 with Further Education, BTEC ONC/HNC Skills/Experince IPC 610 certified/ trained preferred. Possess experience in electrical wiring and assembly. Previous experience in the aerospace or defence industry would be desirable. Manual handling training. Lifting and slinging (including overhead cranes) training. ESD training. Please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. "Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

Assembly Operative Location: Bolton Salary: £35,685.85 Hours: 4 days per week Mon - Thurs, 37 hours Introduction ES Recruit are currently recruiting for an Assembly Operative to join our client's Operations team. This is an excellent opportunity for a practical and motivated individual with assembly or manufacturing experience to join a well-established engineering environment offering long-term stability and development opportunities. The Role The successful candidate will be responsible for re-assembling doors and associated products using supplied components and materials, ensuring all finished products meet required quality standards and are ready for customer delivery. Key Responsibilities Re-assemble doors and products to engineering drawings using stock parts and materials Fit custom components and insulation materials using hand tools and associated equipment Finish products to the required quality standards for final delivery Complete product documentation in line with project requirements Support manual handling activities where required Maintain a clean, safe, and organised working environment Report any risks, hazards, or quality concerns to supervisors Essential Skills & Experience Experience using hand tools and measuring equipment Ability to follow assembly drawings and fitting instructions Strong organisational and time management skills Good understanding of health & safety procedures Ability to work independently and as part of a team Desirable Previous experience within steel door manufacturing or a similar environment Knowledge of door hardware and locking systems Understanding of continuous improvement principles FLT licence advantageous Benefits & Perks Time Off & Flexibility 4 or 5-day working patterns 25 days annual leave plus bank holidays Additional service days Pay & Benefits Pension scheme (5% salary sacrifice) Life assurance Employee Perks Professional membership support Free fruit, tea, and coffee On-site parking Health & Wellbeing Healthcare package Company sickness scheme Mental health first aiders Occupational health support Free eye tests and contribution towards glasses If you are looking for your next opportunity within a fast-paced environment, apply today or send your email to (url removed)

Are you an experienced Operations Manager within Engineering and would like to join a very well established business who are offering career progression to Director level. There is a salary of up to £68,000 plus a great benefits package and strong working culture. This is a new role within the business and the position is available to start within the next few weeks! To manage and maintain an efficient and effective Operations Department in line with Company strategy, including warehouse and manufacturing management and controls, distribution, stock and materials, staff management and labour efficiencies. Initially the role will be focussed on the production/engineering side of the business which will then lead to overseeing the warehouse/transport department. The Role: Production Planning and Management t Ensure effective planning, in-house manufacturing & distribution of products whilst balancing the advantages and disadvantages of in-house or external manufacture to ensure the most cost effective method is used to satisfy sales demand Provide cost effective and efficient planning of all labour resources and ensure optimum productivity and outputs Recruit and work closely with R&D/Quality/Purchasing staff to ensure smooth introduction of new products ranges and variants, plus improve methods of manufacture and assembly for all products. To liaise with Technical reference manufacturing and distribution improvements Constantly review ‘Make-Buy’ decisions for all manufacturing/assembly items with the Purchasing Department. TO work with Purchasing to ensure excellent supply chain service pricing and delivery Work closely with other Heads of Departments to ensure strong integrated and holistic processes and management flows. Contribute to budget planning, assimilation and operational management to ensure all activities operate within budget and seek continuous improvements in efficiencies across systems and processes to reduce operating costs wherever possible Engineering / Health and Safety & Quality Manage and maintain all Company VCA accreditation, maintenance and compliance Manage the engineering function to ensure that the company develops products as necessary Ensure production engineering complements the budget, drives increased efficiency and reduces the reliance on manual labour Ensure all Company VCA accreditation, maintenance and compliance is retained Maintain all procedures and documentation as set out in the accreditation procedures Ensure all procedures are compliant with the VCA accreditation To work towards the implementation of an ISO system of working Ensure that all Staff work in a safe manner and provide internal and external risk assessments. Ensure a safe and healthy environment free from potential hazard or risk Transportation, Distribution and Warehouse Management Ensure that all sales despatch targets are achieved and that customer delivery aspirations are met/exceeded Organise and distribute goods in the most cost effective and efficient manner Undertake frequent monitoring checks (daily) to ensure that all orders, stock and transportation are organised and scheduled in line with customer due dates. Manage and control cost effective and efficient use of external transport resources. Manage and maintain an accurate, effective and efficient stock inventory and control Develop and implement a standard of continuous improvement, maintaining a tightly managed model of 'goods in and goods out’ inspections to optimise quality standards Manage and control Storage Capacity as effectively and efficiently as possible Maintain tight cost controls across whole section About You: You will come from an Engineering background, ideally with an engineering qualification Proficient with ERP systems A self starter Experienced in managing team members Benefits: Working a 37 hour week Early finish on a Friday Pension 32 days holiday including bank holidays On site parking INDAB

A fantastic opportunity to join our fast-paced but friendly and inclusive Manufacturing environment. Salary: £42,558 Dynamic (hybrid) working: 5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... The opportunity: This opportunity is for an Electrical Fitter to join the Manufacturing team supporting assembly and certification of a variety of electrical hardware builds, ranging from small fixtures through to complex missile systems, during all phases of the product lifecycle. You will be providing operations support to ensure programme targets are met to agreed time, cost and quality requirements. Ensuring that completed hardware builds are manufactured in accordance with drawing requirements and specifications; Maintaining a safe working environment in-line with 5S policies Always aiming to deliver in line with all time, cost and quality requirements Ensuring assembly unit production costs are met Maintaining, to the highest level, workmanship standards and product quality Ensuring the completion of all manufacturing documentation Working closely with fellow Operators, Engineering and Quality to overcome any technical challenges and offer feedback for continuous improvement activities You will be working with a large team of multi-disciplined operators in a fast-paced but friendly and inclusive Manufacturing environment. The team has a great mix of people, ranging from apprentices through to experienced skilled technicians, all striving to deliver technical excellence across a number of different missile systems in development and production. What we're looking for from you: Qualifications required (all of the below): Electrical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) Electrical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.) Electrical Engineering / Manufacturing Level 3 vocational qualification (NVQ) (NVQ - not required if you have achieved a L3 apprenticeship standard) Practiced in reading and understanding assembly drawings and planning instructions Fully conversant with all Manufacturing equipment, tools and measuring instruments Uses their initiative and can work without close supervision Goes 'the extra mile' to get work finished to a high standard Flexibility and adaptability Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDAUK), Instagram (MBDAUK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Assembly Operative Bolton £35,685.85 + Overtime Available 4-Day Working Week (Mon–Thurs) Overview Our long-standing client is looking to appoint an Assembly Operative to join their manufacturing operations team within a highly regulated engineering environment. This role will focus on the re-assembly, finishing, and preparation of engineered steel products and associated hardware for final delivery, ensuring all products are completed to the required quality and project standards. Working as part of the shop floor operations team, you will be responsible for assembling products from engineering drawings, fitting custom components, completing project documentation, and ensuring finished products are prepared for dispatch. Key Responsibilities Assembly & Product Finishing • Re-assemble engineered doors and products using supplied stock components and materials, • Fit insulation materials, hardware, and custom components in line with engineering drawings, • Use hand tools and measuring equipment to complete assembly activities, • Finish products to the required quality standards for customer delivery, • Pack completed products safely for dispatch Documentation & Quality • Complete product and project documentation accurately, • Follow fitting instructions, assembly drawings, and standard operating procedures, • Maintain quality standards throughout the assembly process Health & Safety • Maintain a clean and safe working environment, • Adhere to all health and safety procedures on the shop floor, • Support manual handling activities where required, • Report any hazards or safety concerns to supervisors Essential Requirements • Experience using small hand tools and measuring equipment, • Ability to read and follow general assembly drawings and fitting instructions, • Strong awareness of health and safety procedures, • Good time management and organisational skills, • Ability to work independently and within a team environment Good to have (not a deal breaker): • Experience within steel manufacturing or similar engineering/manufacturing environments, • Knowledge of door hardware and locking systems, • FLT licence / forklift experience, • Exposure to continuous improvement methodologies Package • £35,685.85 annual salary (£18.48 per hour), • 4-day working week (Monday – Thursday), Friday OFF!, • 37-hour working week, • Overtime available during busy periods, • Long-term opportunity within an established engineering manufacturer If this role sounds of interest, feel free to contact Martin at Project Start or simply apply to prompt a call back

PLEASE READ BEFORE APPLYING: Please note that in order to be considered for this opportunity you will need to be eligible for SC (Secret Level) UK Security Clearance. Both the role and client site have ITAR nationality restrictions Role Overview: Morson are recruiting on behalf a leading defence equipment manufacturers based in Bolton, Greater Manchester for a time served ELECTRICAL FITTER. This is a contract role although highly likely to be long-term. Rates: £28.35 per hour Umbrella or £21.12 per hour (holiday pay on top of hourly rate) rates rise after 12 weeks to £29.70 per hour Umbrella or £22.12 per hour PAYE Monday - Friday 37 hours + The role will be responsible for carrying out manufacturing and test tasks within the electrical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives Suitable candidates MUST hold time served apprenticeship, any candidates without apprenticeship WILL NOT be considered Specific responsibilities include: Certify the product in line with Product Certification procedure Demonstrated ability / willingness to certify own work in line with company quality standards Maintain product certification and approval via regular audits Possess a versatile skill base with the capability to apply these skills across a range of tasks Be fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle Ensure manufacturing build, inspection and where relevant test times are met. Check and complete all paperwork associated with the manufacturing data pack Maintain to the highest level, workmanship standards and product quality Ensure compliance with all associated procedures applicable to the manufacturing process Maintain a safe working environment Maintain a good housekeeping policy Willing to contribute to an environment of process improvement Role requirements (skills, training and qualifications) Essential: Engineering/ craft apprenticeship ESSENTIAL Possess experience in electrical wiring and assembly Electrical fitting experience Desirable: IPC 610 certified/ trained preferred Previous experience in the aerospace or defence industry would be desirable Manual handling training Lifting and slinging (including overhead cranes) training ESD training

Our client has an opportunity for an Electrical Inspector to join them on a 12 month contract. Role: Electrical Inspector Location: Bolton - fully onsite Clearance: BPSS required to start Hourly Rate: £28.35 per hour via Umbrella, inside IR35 What you'll be doing: Responsible for all elements necessary to achieve and maintain the quality of deliverable hardware. Certification of product in line with processes and procedures. Examining for correct assembly including verifying all forms of electrical connections. Examining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc. Inspect for physical damage. Intermediate inspection checks for non-Product Certification activities. Monitoring of operators within the Product Certification Scheme. Check, complete and certify all paperwork associated with the manufacturing data pack. Control of non-conforming items. Raise and maintain relevant data records/non-conformance reports. Produce relevant inspection/quality control documentation/history sheets. Care for and use specialised inspection tools. Maintain product certification and approval via regular audits. Ensure compliance with all associated procedures applicable to the manufacturing process. Ensure inspection times are met. Possess a versatile skill base with the capability to apply these skills across a range of tasks. Maintain to the highest level, workmanship standards and product quality. Maintain a safe working environment. Maintain a good housekeeping policy. Willing to contribute to an environment of process improvement. Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21or HNC. Several years, experience as a skilled person. IPC 610 & IPC 620 certified / trained preferred. Manual handling training. ESD Training. No colour blindness. Requirements: Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship OR Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3 OR Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3 OR Vocational NVQ3 with Further Education, BTEC ONC/HNCIn Engineering/Manufacturing based subjects - Ability to provide copies of above certificates on submission is essential Experience with inspecting the work of other people is essential Electrical background Right to live and work in the UK without restrictions If you are interested in applying for this position and you meet the requirements, please apply immediately! Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. "Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

Unity is advertising this opportunity on behalf of our client.All applications will be directed to our client.Are you an experienced cleaner looking for flexible work that fits around your life?.Whether you’re looking to fill gaps between other jobs or build a full-time income on your terms, this

Accommodation Cleaner - Hayling Island - Hayling Island, Hampshire .Job title – Accommodation Cleaner.Location – Meadow Bay Villages, Hayling Island Holiday Park, Hayling Island, PO11 0QS.Part Time, Seasonal, Mondays & Fridays with possible overtime.We are looking for part time accommodation

Unity is advertising this opportunity on behalf of our client.All applications will be directed to our client.Are you an experienced cleaner looking for flexible work that fits around your life?.Whether you’re looking to fill gaps between other jobs or build a full-time income on your terms, this

Operating machinery and equipment safely within the production line.

Operating and overseeing production lines. Troubleshooting issues on production lines. If you are interested in this role and meet the above criteria, apply online.

Job Description Job DescriptionProduction Operative Jobs in Andover at Stannah – Join Our Team!Stannah have

Job Description Due to expansion, we are looking to employ a reliable Commercial Window Cleaner (driver) to work in the Manchester, Liverpool and surrounding areas.A total of 40 hours per week at £13.Full clean British driving licence required / Must be over 25 years old IPAF &.Class 2 HGV license

Discounted services including Online Doctor.

Advise on local regulatory implications and integrate them strategically early on.Advise on market access and pricing processes in the UK.Identifying potential pathways for early access for clinicians/patients to support such initiatives.Holistic profile fit for strategic and operational input for e

Experienced Case Manager – Adult Brain & Spinal Injuries.Full or part time (minimum 3 days/week).Must have medico-legal case management experience*.Compass Associates is proud to be working with a well-established case management business, to recruit a new Case Manager to join their North West adu

ENT Consultant - NHS Insourcing Opportunity.Competitive rates paid into your Limited Company.Are you an ENT Consultant looking for additional weekend work? Here at 18 Week Support, we have an amazing opportunity to work with a well-established NHS Trusts in the Somerset area, covering Surgery.This i

Develop clear, individualised treatment plans in line with NICE guidance. Adhere to prescribing standards, policies, and professional guidelines.

We Are Hiring – Healthcare Assistant | Ultrasound Department.Month Fixed Term Position £24-27k per annum.Based in various clinics in Surrey: GU22, KT12, TW20.Possibility to work overtime and cover weekend shifts.SAH Diagnostics is a growing healthcare provider dedicated to delivering high‑quali

Conduct all clinical interventions and related actions in line with relevant professional standards, such as ESPIOG, CSP, and HPC, as well as the company standards and policies and where applicable, contract parameters and KPIs. Demonstrate a commitment to ongoing professional development and to mai

Endoscopy Decontamination Technician - NHS Insourcing Opportunity.Are you an Endoscopy Decontamination Technician looking for additional weekend work? Here at 18 Week Support, we have an amazing opportunity to work with multiple well-established NHS Trusts in the West Midlands.This is an excellent o

Work in line with medico-legal standards, clinical governance and regulatory requirements.

Lead the Studio Experience across Two Premium Clubs in the heart of Notting Hill.Permanent, Full-Time (40 hours/week including some weekends).Body Works West (Private Members Club) & Notting Hill Club (Boutique Fitness Studio).Are you a dynamic leader with a passion for group exercise and exceptiona

Associate Clinical Psychologist (Remote – Summary Formulations).Associate / Interim, Flexible Hours.RTN Mental Health Solutions has an ongoing need for HCPC-registered Clinical Psychologists to support with summary formulations on an associate basis.This role is fully remote and highly flexible ��

Drive prescription growth, service delivery and OTC sales in line with budget. Complete first-line investigations into patient safety incidents and controlled drug discrepancies. Identify and develop internal and external talent to create a strong succession pipeline.

This offers consultants a different professional experience, with greater autonomy, clearer lines of influence and a genuine opportunity to shape services for a defined population during a period of transformation and investment. Discretionary increments may be applied once in post in line with hosp

You will work with young adults with learning disabilities and impairments, supporting them through person-centred, strength-based assessments and care planning in line with the Care Act 2014. Complete strength-based assessments and reviews in line with the Care Act 2014. Undertake Mental Capacity A

Temporary Medical Receptionist (Remote).Remote (Supporting a GP Surgery).Temporary 1st June until approximately September (end date TBC).We are seeking a reliable and organised.GP surgery team on a temporary remote basis from.This is an excellent opportunity for someone with previous GP or healthcar

Streamlined compliance and registration process.

Preparing clinical rooms and maintaining cleanliness and stock levels.

Dispensing Optician Vacancy - Shephard and Akay Optometrists.We’re a friendly, community focused independent opticians where people and patients always come first.As a Dispensing Optician with us, you’ll join a close-knit team that values your skills, supports your development, and gives you the

Clinical Scientist – Exciting Career opportunity in Radiation Oncology – British overseas Territory.The small team in this centre are seeking to hire a new Medical Physicist/Clinical scientist.Life on the Island is excellent for those who enjoy an outdoors.Excellent basic salary (depending on ex

Do you want to become an Operational Director & Partner with Newmedica in the future?.One thing that unites everyone at Newmedica is a passion for our purpose: improving people’s sight and transforming lives.We want to deliver outstanding eye care that’s accessible, sustainable and patient‑cen

Private Health Care Practitioner / Therapist.Acupuncturist, Reflexologist, Chiropodist, Podiatrist.Based at the historic and beautifully restored Old Forge in Toddington, we are a growing multidisciplinary healthcare clinic dedicated to providing care that feels personal, considered, and deeply reas