Trabajos continuous improvement engineer en PlymouthCrear alertas

Join a team where precision meets purpose. As a Quality Engineer, you wont just test products, youll shape the standards that define excellence. From uncovering hidden flaws to driving continuous improvement, youll play a critical role in delivering reliable, high-performing solutions that customers trust. If youre energised by solving complex problems, collaborating across teams, and turning qual... ZIPC1_UKTJ

Quality Engineer Location: Plymouth areaSector: ManufacturingRecruiter: Butler Rose (on behalf of our client) Butler Rose is delighted to be working with an esteemed and well-established manufacturer in the Plymouth area to recruit a Quality Engineer. This is an excellent opportunity to join a quality-focused organisation with a strong reputation for engineering excellence, continuous improvement, and employee development. The Role Reporting into the Quality & Compliance Manager, the Quality Engineer will play a key role in supporting, maintaining and improving the Quality Management System across the business. You will work closely with production, engineering, suppliers and customers to ensure products and processes meet both internal standards and customer requirements. This is a hands-on role suited to someone who enjoys being visible on the shop floor, analysing data, solving problems, and driving robust corrective actions. Key Responsibilities • Support the ongoing development and improvement of the Quality Management System, • Identify trends, risks and non-conformance through data analysis, monitoring and auditing, • Conduct root cause analysis and implement effective corrective and preventive actions, • Support defect management, including containment actions and production decision making, • Carry out audits, inspections, measurements and tests to required standards, • Produce clear, accurate and data-driven reports on quality performance and improvement actions, • Work cross-functionally with production, engineering, suppliers and customers to resolve quality issues, • Support New Product Introduction (NPI), including APQP and PPAP activities, • Provide quality support to production, including SPC data analysis, scrap reduction initiatives and first-off support, • Assist with document control and internal and external audit activities To be successful in this role, you are likely to have: • A qualification at BTEC, HNC or equivalent level in Engineering, Science or a related discipline, or relevant industry experience, • At least 3 years' experience in a Quality Engineering role within a manufacturing or precision engineering environment, • Strong working knowledge of quality tools such as 8D, FMEA, SPC, MSA and PPAP, • Experience working with ISO standards (ISO 9001 essential; ISO 14001 / ISO 45001 advantageous), • Confidence using Microsoft Word, Excel and PowerPoint, • Strong communication skills and the ability to work effectively across departments, • A proactive, detail-focused approach with the ability to work to deadlines, • Salary up to £40,000 depending on experience, • 25 days holiday + bank holidays, increasing to 28 days after one year's service, • Enhanced pension scheme, • Healthcare benefits If you're a Quality Engineer looking to take the next step in your career within a high-quality manufacturing environment, we'd love to hear from you. Apply today or contact Butler Rose for more information. Butler Rose is committed to equality in the workplace and is an equal opportunity employer.Butler Rose Ltd is acting as an Employment Business in relation to this vacancy.

Senior Process Engineer Location: PlymouthSalary: £44,000 - £49,000 (depending on experience)Contract: Permanent | Full-time (39 hours, Monday-Friday) Butler Rose is proud to be partnering with an established and highly respected manufacturing business based in Plymouth, recruiting an experienced Senior Process Engineer to support continued growth and operational excellence within its sheet metal manufacturing operations. This is a key engineering role offering real influence across new product introduction, process optimisation, and day-to-day production support within a technically advanced, high-volume manufacturing environment. The Role As Senior Process Engineer, you will take ownership of critical manufacturing processes within the sheet metal area, ensuring new products, equipment and improvements are delivered to world-class standards. You'll work across NPI, continuous improvement initiatives and live production support, playing a central role in driving performance, capability and efficiency while helping to embed a strong continuous improvement culture across the factory. This role would suit a proactive, technically strong engineer who enjoys solving problems, leading improvement projects and influencing stakeholders at all levels. Key Responsibilities Process Ownership & Performance • Take full ownership of defined manufacturing processes within the sheet metal department, • Lead successful introduction of new products and equipment, ensuring capability and quality targets are met, • Deliver engineering projects on time, within budget and in line with health & safety and quality standards, • Act as a role model, demonstrating professionalism, accountability and high engineering standards, • Support and coach junior engineers and team members, • Drive process optimisation using lean principles and structured problem-solving techniques, • Troubleshoot technical issues to reduce waste and improve quality and throughput, • Collaborate closely with Engineering, Quality, Maintenance, Production and Supply Chain teams, • Contribute technical insight during NPI and design review activities We welcome applications from a wide range of backgrounds. To be successful, you are likely to demonstrate: • HNC Level 4 or above in Manufacturing or Mechanical Engineering, • Degree in Industrial Engineering and/or Lean Six Sigma certification (desirable), • At least 5 years' experience in a senior or lead engineering role within manufacturing, • Strong experience of sheet metal processes, including jig design and welding/weld jigs, • Proven track record in delivering manufacturing projects, layout redesigns and process improvements, • Manufacturing systems, process engineering and project management, • CAD and planning software, • Lean manufacturing, TPM, OEE, automation and smart manufacturing, • Equipment validation and machine safety standards, • Root cause analysis and data-driven decision making, • Strong communication, stakeholder management and leadership skills, • Salary of £44,000 - £49,000, depending on experience, • Company-wide bonus, • 33 days annual leave including bank holidays, plus holiday purchase scheme, • Life assurance (3x salary), • Pension contributions matched up to 5%, • Health and wellbeing benefits, • Access to employee savings and discount platforms Butler Rose is committed to equality in the workplace and is an equal opportunity employer.Butler Rose Ltd is acting as an Employment Business in relation to this vacancy.

We're looking for a confident, safety-driven Mechanical professional to take on a frontline supervisory role on a major infrastructure project with up to 3 years of continuous work.If you're a hands-on leader who knows Mechanical systems inside out and isn't afraid to challenge unsafe work, this is your next move. The Role • Supervise Mechanical operatives and subcontractors, • Ensure full compliance with Mechanical Safe Systems of Work, • Support permit-to-work and safe isolation processes, • Lead toolbox talks, briefings, and daily coordination, • Oversee installations, testing, flushing, pressure testing, and commissioning, • Identify hazards and drive continuous safety improvement, • Time-served Mechanical Engineer / NVQ Level 3, • CSCS Gold Card (Pipefitter, Mechanical Engineer, or equivalent), • SSSTS or SMSTS, • Strong knowledge of Mechanical systems and safe isolation, • Proven experience supervising Mechanical works, • Ability to interpret drawings, RAMS, and permits, • Strong communication and leadership skills, • Asbestos Awareness Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

Overview Elis, a leader in circular services, allows businesses to achieve optimal hygiene and protection for their employees and customers thereby enriching their well being in a sustainable way. Our rental maintenance model supports our customers to focus on their core business while reducing their environmental footprint. Our circular services emulate our commitment to a more sustainable future: connecting us, our clients and our planet. We are looking for a Maintenance Engineer, who will report directly to the Engineering Manager on site. The successful candidate will provide support in relation to all maintenance tasks and projects being undertaken, including day to day breakdown, PPM, equipment updates, new installations, and building/infrastructure upgrades. Requirements • A recognised qualification relevant to the role (e.g. mechanical or electrical C&G)., • Skills in both Electrical and Mechanical trades: Apprenticeship with indentures preferred., • Electrical Installation Maintenance., • Mechanical Fabrication/Maintenance., • Electronic fault finding to component level., • Preferred knowledge of other engineering disciplines including pneumatics, hydraulics, steam systems Electrical Installation 18th Edition., • Excellent verbal and written English communication skills.Your tasks, • Ensuring all activities are carried out in accordance with the Site Health and Safety instructions and the SSG Health and Safety manual, as well as in accordance with relevant engineering standards., • Ensuring all PPM activities are completed on time as required, feeding back information to the Senior Engineer to improve the PPM system and activities., • Working closely with the Engineer on the opposite shift to ensure all handover of ongoing activities is carried out every day, and sharing all other information and practices as required., • Providing knowledge and input into continuous improvement of plant, machinery, and maintenance activities., • Working with Engineering colleagues and Engineering Manager to identify long running problems and suitable solutions., • Undertaking repairs to equipment in a safe and timely manner ensuring that Production is constantly updated on progress., • Undertaking remedial engineering works to equipment or site as instructed by the Engineering Manager., • Reporting any incidents, accidents and near misses in accordance with Health and Safety Policies., • Ensuring that safe systems of work and best practice procedures are adhered to., • Ensuring the Company’s disciplines, rules and standards are maintained., • Maintaining excellent communication between Production staff and co-workers.

Elevations Design & Projects division are seeking a skilled and innovative Design Engineer to join a key client of ours engineering team in Plymouth. This role is responsible for designing, developing, and supporting the production of new and existing products, while ensuring technical excellence and alignment with industry standards. The successful candidate will play a pivotal role throughout the product lifecycle, from concept through to production support. Design Engineer Key Responsibilities * Lead the design and development of new products, guiding projects from initial specification through to production release. * Collaborate with cross-functional teams and stakeholders to deliver high-quality design outcomes. * Maintain and update 3D models and engineering drawings; ensure correct version control and document management. * Design and procure jigs, fixtures, and production tooling; provide comprehensive production engineering support. * Prepare and manage technical documentation including design specs, proposals, risk assessments, test plans, and manuals. * Perform mechanical analysis and validation of designs to ensure compliance with standards and regulations. * Support production operations by troubleshooting design-related issues and driving continuous improvement initiatives. * Provide technical support to sales and marketing teams, including product presentations and field demonstrations. * Liaise with customers, suppliers, and partner companies as needed to support engineering activities. * Assist in cost estimation, project planning, and tracking budget variance. * Contribute to departmental process improvements using PDCA and other continuous improvement methodologies. * Ensure all work is performed in line with company procedures and quality standards. Design Engineer Qualifications & Experience * Degree in Mechanical Engineering or a related field (BEng or equivalent). * Prior experience in the railway or another regulated industry is advantageous. Key Skills & Competencies * Proficient in 3D CAD modelling and drafting (Solid Edge / Teamcenter preferred; training can be provided). * Strong design and problem-solving skills with a practical, hands-on approach. * Excellent communication skills—able to produce and present clear technical documentation and lead design reviews. * Collaborative mindset with the ability to build effective relationships across departments and with external partners. * Sound understanding of mechanical engineering principles, including best practices such as peer reviews. * Competency in mechanical analysis and customer-facing technical documentation. * Familiarity with PDCA and other continuous improvement tools. * Knowledge of welded fabrication and cast component design is highly desirable. * Experience with composite materials and/or electrical principles is a plus.

Elevation Recruitment Group’s Design & Projects division are working with a key engineering client in Plymouth to recruit a Design Engineer on a 3-month fixed term contract. This is a hands-on, project-focused role supporting a busy engineering team with both new product development and existing product improvements. You’ll play a key role in delivering design solutions to tight timescales, contributing across the full product lifecycle from concept through to production support. Design Engineer – Key Responsibilities • Lead the design and development of new and existing products, supporting delivery from concept through to production, • Work closely with cross-functional teams to deliver robust, high-quality design solutions, • Create, update, and manage 3D CAD models and engineering drawings, ensuring accurate version control, • Design and source jigs, fixtures, and production tooling to support manufacturing, • Produce technical documentation including design specifications, risk assessments, test plans, and manuals, • Carry out mechanical analysis and validation to ensure compliance with relevant standards, • Support production with troubleshooting and continuous improvement initiatives, • Provide technical input to internal stakeholders including sales and operations, • Liaise with suppliers and external partners to support project delivery, • Assist with cost estimation, project tracking, and meeting delivery milestonesDesign Engineer – Experience & Qualifications, • Degree qualified in Mechanical Engineering (or similar), • Proven experience in a Design Engineer role within a manufacturing or engineering environment, • Experience within a regulated industry (e.g. rail, aerospace, automotive) would be advantageousKey Skills, • Proficient in 3D CAD (Solid Edge / Teamcenter preferred, though training can be provided), • Strong problem-solving ability with a practical, hands-on engineering approach, • Experience producing clear technical documentation and supporting design reviews, • Understanding of mechanical engineering principles and best practice design processes, • Knowledge of welded fabrications and cast components highly desirable, • Exposure to composites or basic electrical principles would be beneficial

As Internal Logistics Engineer, you will play a vital role in optimising internal logistics processes within our manufacturing facility. Reporting to the Warehouse Leader, this position focuses on ensuring efficient material flow, reducing waste, and driving continuous improvement initiatives to support productivity and quality. Salary is DOE but offers an excellent package - Working Mon to Fri 083... ZIPC1_UKTJ

Our client, a leading Aerospace company, are looking for a Lead FPGA Engineer to join the team on an initial 6-month contract. This is your opportunity to join a pioneering engineering team - in a hybrid role based in either Plymouth OR Bristol - and take a leading role in the next generation of aerospace technology. We’re looking for a Lead FPGA Engineer ready to take a leading role in shaping the next generation of aerospace systems. You’ll work on high performance navigation and sensor technologies where precision, reliability, and innovation are critical. Precision and reliability guide everything we do. Our Bristol and Plymouth sites are centres of excellence for navigation and control systems, powering world-class innovations like MEMS-based IMUs and TERPROM® terrain navigation systems. What You Will Do: • Lead full lifecycle firmware development on new and existing products and test equipment, • Work closely with the Electronics Discipline Chief to drive continuous improvement in the firmware development process, • Support the management and maintenance of software tools used by the digital design team, • Effectively communicate firmware design and process decision to both technical and nontechnical audiences, • Collaborate with multidisciplinary experts in systems, software, and mechanical design to bring complex projects to life, • Participate in peer reviews for firmware, • Share your expertise, mentor colleagues, and champion continuous improvement across the digital design team What You’ll Learn: • Develop deep expertise in high performance IMU and MEMS sensor design for real world aerospace applications, • Gain hands-on experience with formal aerospace development processes, • Work directly with cutting-edge FPGA and mixed-signal technologies in live aerospace systems, • Thrive in a high-performing, collaborative engineering environment where precision meets innovation, • Opportunity to develop broader electronics skills alongside digital design work What You Must Have: • A minimum 2:1 Bachelor’s degree (or equivalent) in Electronics Engineering or a related field., • Strong VHDL experience — including architecture, coding, simulation, and test benching (Microchip, Xilinx, SoC)., • Proven experience of working to formal design standard such as DO-254, • Excellent communication skills, • Vision for continuous improvement and forward-thinking approach Skills & Experience We Value: • Familiarity with Verilog/SystemVerilog, OSVVM, UVM or UVVM, • Experience in MEMS sensors, airborne electronics, or ASIC development, • Cross-disciplinary awareness (systems, software, mechanical), • Experience with E-CAD tools for schematic capture, PCB layout, and simulation (e.g. Xpedition, HyperLynx, AMS), • If you’re ready to make an impact in a company where innovation, precision, and purpose come together, join our mission today. Note: The successful candidate must hold an active or be willing and eligible to obtain SC level security clearance. Please note that access to certain projects may be restricted based on nationality. Apply now and be part of the team that's redefining aerospace! ✈️ Diversity Statement: Diversity drives innovation, inclusion drives success. We believe a multitude of approaches and ideas enable us to deliver the best results for our workforce, workplace, and customers. We believe a multitude of approaches and ideas enable us to deliver the best results for our workforce, workplace, and customers. We are committed to fostering a culture where all employees can share their passions and ideas so we can tackle the toughest challenges in our industry and pave new paths to limitless possibilities.

Lead Civil Engineer Location: Plymouth Contract Type: Permanent Start Date: TBC Salary: Competitive Join Altrad – Shaping the Future of Critical Infrastructure! We are the leading provider of infrastructure services. At Altrad, we transform our nation’s critical infrastructure to ensure it operates safely, efficiently, and sustainably. With over 11,000 talented people, we deliver the full spectrum of essential engineering and construction services across both onshore and offshore industries. Join a Leading Organisation in the Nuclear Industry. Role Details: The Civil/Structural Engineer is a key onsite full-time role.. The post holder will be responsible for the civil and structural engineering requirements of delivering remediation whilst working as part of the project team. Key Responsibilities: • Identify project functional requirements, Works Information, preparation of GI specifications, responding to Technical Queries, Requests for Information (RFI) for the project., • Manage engineering support to the project., • Support project optioneering process., • Review and accept project drawings and documentation., • Manage detailed design activities in accordance with project standards., • Carry out technical assessment/approval of contractors work instruction/method statements/risk assessments., • Provide technical supervision of construction/deconstruction activities to ensure compliance with design intent., • Specify and provide technical supervision of commissioning and/or decommissioning (as required)., • Liaise and consult with stakeholders throughout project life cycle to ensure efficient and effective project delivery., • Comply with all Environment, Health, Safety, Security and Quality policies, procedures, work. instructions and risk assessments and support the continuous improvement of Health, Safety, Environment and Quality on Site., • The post holder will be expected to support delivery within their range of skills, knowledge, experience and competence. Key Requirements: Essential • Experience of developing design assurance for complex projects, • Experience in civil engineering for complex projects, • Experience in a defence sector., • Experience in civil sector., • Experience of design delivery within defence projects., • Experience in engineering lifecycle management Why Join Us? • Work on high-impact projects within a leading organisation at the forefront of the nuclear industry., • Competitive salary and benefits package., • Opportunities for career growth and professional development., • Collaborative and dynamic work environment with a focus on innovation and excellence.

Senior Continuous Improvement Engineer Plymouth, Devon £44,000 -£49,000 per annum, DOE + Bonus + 33 Days Holiday + Pension + Life Assurance + Health Cash Plan + Training & Development + Free Onsite Parking Are you an experienced in continuous improvement within the engineering/manufac

We are looking for an experienced Systems & Compliance Quality Engineer to lead and oversee the quality management systems, ensuring compliance with regulatory requirements, internal policies, and ethical standards. The Quality Compliance Engineer will play a key role in protecting the business from non-compliance risks while driving initiatives that enhance sustainability and operational excellence. The Role As the Quality Compliance Engineer, you will take ownership of the company’s quality management system (QMS) and compliance activities. You’ll manage audits, corrective/preventive actions, and certifications, ensuring all operational teams understand and follow established processes. You will provide guidance and oversight on quality documentation, product release, and supplier compliance. You will also work closely with management to deliver continuous improvement, strengthen our compliance culture, and contribute to the sustainability goals of the business. This is a high-impact role that involves interacting with multiple departments, customers, and external auditors. Key Responsibilities: * Maintain and develop the company’s AS9100, AS9120, and ISO9001 quality management systems * Manage internal and external audits, ensuring timely corrective and preventive actions * Oversight of document management and archiving systems * Lead the First Article process in line with AS9102, support...

TQR are working exclusively with a global Manufacturer based at their Plymouth site to recruit an experienced Process Engineer at their Plymouth site. As a key member of the Engineering function, the successful candidate will support safe, reliable, and efficient operation of the sites moulding and extrusion processes and associated equipment. The role combines technical problem solving with process optimisation, driving quality, repeatability, and productivity through robust process control, standardisation, and technical support. You will Work closely with Production, Maintenance, and Quality, and will lead technical initiatives that enhance first-time yield, reduce cycle time, minimise scrap by strengthening mould performance, improve process capability (CP/CPk) and advancing machine-setting practices. Key Responsibilities: Develop, document, and optimise moulding process parameters to achieve consistent quality and performance. Lead troubleshooting of process-related issues on moulding machines, tooling and auxiliary equipment, ensuring rapid root-cause identification and sustainable corrective actions. Support the introduction, commissioning, and validation of new moulds and tooling, ensuring correct set-up, safe handover, and adherence to the tooling commissioning process. Champion the use of scientific moulding techniques and data-driven decision making to enhance process robustness. Collaborate with Maintenance and the CI Lead to drive TPM activities focused on process capability and equipment uptime. Implement and support SMED activities to reduce changeover times and increase flexibility. Support the development and maintenance of process documentation (SOPs, setup sheets, validation reports). Provide technical training and coaching to setters and operators to build process understanding and ownership. Participate in trials, automation integration and continuous improvement projects that enhance quality, throughput, or cost efficiency. Support engineering change management and ensure process alignment with Quality and Validation standards. Promote a culture of right-first-time performance, teamwork, and continuous improvement. Essential Experience & Candidate Attributes Required: A minimum of a HNC (or equivalent) in a relevant engineering discipline. In the absence of this qualification a time served Process / Manufacturing Engineer may also be considered. Proven experience in moulding or extrusion process engineering (rubber, silicone, or plastic moulding environment). Strong understanding of moulding principles, tooling design, and machine control systems. Hands-on experience with process optimisation, validation, and troubleshooting techniques. Knowledge of TPM, SMED, Lean/CI principles and Six Sigma. Data-driven approach to problem-solving, comfortable using SPC, capability studies, and DOE where applicable. Effective communicator and team player, able to influence across departments and work collaboratively with production and maintenance teams. Methodical, safety-conscious, and resilient under pressure. This is a day shift position working Monday to Thursday 08:30 to 17:00 and Fridays 08:30 to 14:30. Please note, out client does not hold a skilled worker visa sponsorship licence, therefore it is essential that candidates must have the immediate right to work in the UK. If you are an experienced Process Engineer from a moulding background and are looking for a new challenge, please submit an up to date CV by using the apply button below. By applying for this position, you confirm that you consent to the processing of your personal data in accordance with the General Data Protection Regulation (GDPR) for the purposes of recruitment, employment and working finding service.

Join Our Team at Smurfit Westrock! Are you searching for a workplace that values you and your growth? At Smurfit Westrock, were committed to sustainability, employee well-being, and personal development. About Us We are a global leader in sustainable paper and packaging. Our focus is on the health and safety of our employees, the well-being of our communities, and delivering exceptional service to our customers. We support our team members to reach their full potential in an inclusive environment that values diversity. The Role We currently have an exciting opportunity for a Facilities and Services Support Cell Technician Engineer to join our Engineering Team at Smurfit Westrock Northampton. The role is an integral part of the site engineering team, with responsibilities to ensure safety, legislative compliance, reliability, people leadershipand continuous improvement of ourplant support services. This will include electrical infrastructure and distribution, production process extraction systems, HVAC systems, compressed air systems, industrial balers, gas distribution, water distribution and fire safety systems. The role supportsthe management ofmaintenance contracts, working with the Engineering Manager and team to ensure value-for-money contracts and supporting compliance of statutory legislative and regulatory requirements. Responsibilities will also include monitoring plant facilities performance,planning preventive maintenance activities to ensure a safe and reliable plant. The ideal candidate will have excellent organisational and communication skills, with a problem-solving mindset, and a flexible approach to working in a hands-on role across a variety of plant facilities services and equipment. The position requires proactive approach to problem-solving and failure analysis, focused on identifying opportunities for improvement and establishing failure prevention through implementation of both preventive and predictive maintenance strategies on plant services equipment, critical infrastructure and support facilities. Key Responsibilities • Ensuring safety systems and practices are followed at all times, and that meaningful safety for life conversations are taking place frequently, • Identify and manage asset reliability risks that could adversely affect operations, ensuring compliance with safety and quality standards., • Develop and implement appropriate predictive and preventive maintenance strategies based on reliability data to ensure equipment reliability and efficiency., • Work closely with the engineering and maintenance teams to integrate new technologies and methods that increase reliability and performance. This may involve overseeing the implementation of reliability-centred maintenance (RCM) and total productive maintenance (TPM) programs., • Prepare reports and documentation to record findings, make recommendations and track performance failures and improvement measures., • Identify and propose new technologies and processes that can improve equipment performance and reliability., • Analyse the failure modes of equipment and systems to prevent failures and downtime using FMECA and apply statistical analysis to predict future system reliability and risk of failure., • Work closely with other engineers and professionals to design out failure where necessary and ensure reliability and durability of new Capital Investment Projects., • Safety-conscious withthe ability to identify potential hazards and take the necessary steps to reduce or eliminate the risk., • Strong understanding of facilities engineering principles, including both mechanical and electrical disciplines, with proven experience as a lead facilities engineer or similar role., • Relevant qualification (HNC or HND) in facilities engineering or a mechanical engineering discipline. Arelevant electrical qualification would also be an advantage., • Ability to identify potential issues and develop cost-effective solutions to ensure optimal performance and longevity of system reliability., • Knowledge of compressed air systems, HVAC systems, industrial boilers, fire protection systems, transportation systems, and industrial baler systems would be an advantage., • Excellent verbal and written communication skills to facilitate collaboration with various stakeholders, including contractors, vendors and cross-functional internal teams., • Competitive salary & benefits, including holiday, pension, and a Cycle to Work scheme, • Ongoing training and development opportunities, • 24/7 confidential support for you and your family, • Flexible working options and family-friendly policies We are an equal opportunities employer, and we welcome applications from all suitably qualified persons regardless of their sex; religious or similar philosophical belief; political opinion; race; age; sexual orientation; or, whether they are married or are in a civil partnership; or, whether they are disabled; or whether they have undergone, are undergoing or intend to undergo gender reassignment. We practice equality of opportunity in employment and select the best person for the job.

Join a team where precision meets purpose. As a Quality Engineer, you won’t just test products—you’ll shape the standards that define excellence. From uncovering hidden flaws to driving continuous improvement, you’ll play a critical role in delivering reliable, high-performing solutions that customers trust. If you’re energised by solving complex problems, collaborating across teams, and turning quality into a competitive advantage, this is your opportunity to make a real impact from day one. Whether you’re a Graduate Engineer with one to two years industry experience or a seasoned Quality Professional, this will be an excellent opportunity to join a company that puts quality and innovation at the core of their ethos. Key Responsibilities: * To actively support the implementation, maintenance, performance and improvement of the Quality Management System by applying appropriate quality tools and techniques. Work independently and as a team member in conducting Quality Engineering activities. * Work in line with Quality, Safety and Environmental Policies, Procedures and Instructions. * Identify performance trends and potential and actual non-conformances in products and processes through data gathering, analysis, monitoring and auditing. * Conduct root cause analysis and implement corrective and preventive actions. * Decision making: To stop production, drive containment action and take c...

Join a team where precision meets purpose. As a Quality Engineer, you wont just test products, youll shape the standards that define excellence. From uncovering hidden flaws to driving continuous improvement, youll play a critical role in delivering reliable, high-performing solutions that customers trust. If youre energised by solving complex problems, collaborating across teams, and turning qual...

TQR Consultancy Ltd in Plymouth is seeking a Quality Engineer to play a critical role in maintaining and improving quality standards. Ideal candidates should have a degree in Engineering or Science and one to two years of industry experience, along with proficiency in six sigma tools.

Automation Engineer - Plymouth Excellent Salary + Bonus + Benefits Rare opportunity to put your own stamp. Excellent investment into improving the site & equipment. Excellent opportunity to grow your role within the site & group. A global manufacturing business and market leader within its sector is looking to appoint an Automation Engineer to support the continued development of its Plymouth operation. With around 150 employees across two adjacent manufacturing facilities, including a brand-new state-of-the-art site, the business is investing heavily in the future of advanced manufacturing and automation. This is a brand-new role created due to growth and investment and offers a rare opportunity for someone to genuinely put their own stamp on a manufacturing operation. There are still a number of labour-intensive processes across the facility, creating huge scope for automation, robotics and process improvement. The successful candidate will play a key role in developing and delivering the site's automation strategy, helping transform the operation into a more advanced and highly automated manufacturing environment. Importantly, this is not a role maintaining existing systems or inheriting legacy projects. This is an opportunity to build something new from the ground up and become a key figure within the wider group's manufacturing strategy. The Role Identifying opportunities to automate existing manufacturing processes Supporting the introduction of robotics, automated machinery and smart manufacturing technologies Leading automation and continuous improvement projects across the site Working closely with production and engineering teams to improve efficiency, quality and productivity Supporting the site's progression towards Industry 4.0 and advanced manufacturing About You Experience within automation engineering, manufacturing engineering or industrial automation Strong understanding of automated manufacturing processes and continuous improvement Experience delivering engineering or capital projects within manufacturing Hands-on approach with strong problem-solving ability Someone motivated by the opportunity to create and develop new automation capability Why Apply? Opportunities like this are genuinely rare. This is a chance to join a growing international manufacturer in a highly visible role where you can influence long-term automation strategy, introduce new technologies and make a lasting impact on the future direction of the site

Maintenance Engineer Plymouth £50,000 - £51,500 A new and exciting opportunity has arisen for a Maintenance Engineer to join an excellent bespoke manufacturer in the Plymouth area. With no day ever being the same the Maintenance Engineer role offers genuine long-term progression and career development within a first-class manufacturing environment. Role & Responsibilities: Carry out PPMs Dealing with all Breakdowns on site, keeping downtime to a minimum Fault Finding on all Machinery to identify issues Adhere to a high level of H&S and instigate a positive culture Look at continuous improvement and have a direct influence on processes Be a strong team player within a team Worked with and installed single phase / three phase electrical motors Be flexible with working hours Knowledge and understanding of 5s and Lean ManufacturingKnowledge, Skills & Experience: Time served as a Mechanical Maintenance Engineer 2 years' experience minimum Ideally Apprentice Trained Strong Communication Skills Multi skilled Engineering experiencePackage and Benefits: £50,000 - £51,500 Employer Pension Scheme 25 days Holiday Exceptional long term career progression opportunitiesHow to apply: Suitable candidates for the Maintenance Engineer role should apply immediately using the 'Apply Now' button by calling Olly on (phone number removed) or by sending your CV directly to We regret that this client is not prepared to sponsor work permit or work permit transfer applications. Candidates must be able to prove their eligibility to work in the UK. Hunter Selection is an employment consultancy and currently has permanent vacancies for Engineering and Manufacturing professionals throughout the UK. If you are looking for work in this area we may be able to assist you. Contact us directly on (phone number removed) and discuss your requirements with one of our dedicated consultants. If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business

TQR are working exclusively with a global Manufacturer based at their Plymouth site to recruit an experienced Electrical Maintenance Engineer on static night shift due to a vast increase in their order book. Reporting to the Maintenance Team Leader, the successful candidate will play a critical hands-on role in ensuring the safe, reliable, and efficient operation of all machinery on site. The position is responsible for both reactive and planned maintenance, first-fix repairs, and accurate CMMS documentation. Working closely with the Maintenance Team Leader & Production Team Leaders, the successful candidate will contribute to asset uptime, quality performance, and continuous improvement. Key Responsibilities: Safety & Compliance: Complete all maintenance tasks in line with site safety procedures, risk assessments, permit-to-work policies and legal requirements. Perform dynamic risk assessments prior to each job; escalate hazards where required. Maintain tidy, safe work areas using a clean-as-you-go and 5S approach. Reactive & Corrective Maintenance: Respond promptly to equipment breakdowns across manufacturing and site services, ensuring permanent and robust fixes. Communicate findings, actions taken, and follow-up needs to the Maintenance Team Leader. Support root cause analysis (RCA) and contribute technical insights to CI initiatives. Planned Preventative Maintenance: Execute PPM tasks as scheduled, ensuring quality completion within timeframes. Identify and report defects, trends, or improvement needs during PPM routines. Support continuous improvement of PPM routines to enhance asset reliability. CMMS & Data Integrity: Accurately record defect details, actions taken, fault codes, and parts used. Ensure data quality is suitable for analysis by the Engineering team. Support improvements in CMMS usage and standardisation. Technical Support & Expertise: Apply strong electrical, mechanical, pneumatic, and hydraulic skills to diagnose complex issues. Provide technical support for installation, commissioning, and acceptance testing (FAT) of new equipment. Act as a technical reference point for colleagues and apprentices. Cross-Functional Collaboration: Work with Production, Quality, and Engineering teams to ensure efficient factory operation. Communicate issues, progress, and solutions through formal and informal meetings. Build strong relationships to support uptime, quality, and safety goals. Electrical Maintenance & Fault-Finding: Lead on electrical diagnostics and permanent fault resolution across injection moulding machinery, drives, safety circuits, and ancillary equipment. Support electrical installations and carry out fault-finding on electrical facility systems, ensuring safe, compliant, and reliable operation of site services and building infrastructure. Act as the primary point of contact for electrical breakdowns requiring in-depth analysis. Essential Experience & Candidate Attributes Required: Proven experience working as an Electrical Maintenance Engineer gained from either manufacturing or engineering. ONC / NVQ Level 3 / HNC or equivalent in Electrical Engineering. Completed Apprenticeship in Electrical Engineering. 18th Edition. C&G 2391. Strong fault finding experience on Electrical Systems. Understanding of H&S regulations and safe systems of work. Experience with CMMS platforms. Competence with pneumatics, hydraulics, variable speed drives. Knowledge of RCA tools (5 Whys, fishbone, etc.) Strong problem-solving mindset with structured approach. Effective communicator able to articulate technical findings to non-technical colleagues. Proactive and self-motivated, with a drive for continuous improvement. Calm and methodical under pressure. Team player who collaborates across functions. The successful candidate will work static night shift comprising of Monday to Friday 22:00 to 06:00 however there may be a requirement for you to train on weekly shift rotation of Monday to Friday 06:00 to 14:00 and Monday to Friday 14:00 to 22:00 for the first couple of months prior to starting work on night shift. If you are an experienced Electrical Maintenance Engineer, can commit to a static night shift and are looking for a new challenge, please submit an up to date CV by using the apply button below. By applying for this position, you confirm that you consent to the processing of your personal data in accordance with the General Data Protection Regulation (GDPR) for the purposes of recruitment, employment and working finding service. TPBN1_UKTJ

TQR are working exclusively with a global Manufacturer based at their Plymouth site to recruit an experienced Electrical Maintenance Engineer on static night shift due to a vast increase in their order book. Reporting to the Maintenance Team Leader, the successful candidate will play a critical hands‑on role in ensuring the safe, reliable, and efficient operation of all machinery on site. The position is responsible for both reactive and planned maintenance, first‑fix repairs, and accurate CMMS documentation. Working closely with the Maintenance Team Leader & Production Team Leaders, the successful candidate will contribute to asset uptime, quality performance, and continuous improvement. Key Responsibilities: Safety & Compliance: * Complete all maintenance tasks in line with site safety procedures, risk assessments, permit‑to‑work policies and legal requirements. * Perform dynamic risk assessments prior to each job; escalate hazards where required. * Maintain tidy, safe work areas using a clean‑as‑you‑go and 5S approach. Reactive & Corrective Maintenance: * Respond promptly to equipment breakdowns across manufacturing and site services, ensuring permanent and robust fixes. * Communicate findings, actions taken, and follow‑up needs to the Maintenance Team Leader. * Support root cause analysis (RCA) and contribute technical insights to CI initiatives. Planned Preventative Maintenance: * Execute PPM tasks as scheduled, ensuring quality completion within timeframes. * Identify and report defects, trends, or improvement needs during PPM routines. * Support continuous improvement of PPM routines to enhance asset reliability. CMMS & Data Integrity: * Accurately record defect details, actions taken, fault codes, and parts used. * Ensure data quality is suitable for analysis by the Engineering team. * Support improvements in CMMS usage and standardisation. Technical Support & Expertise: * Apply strong electrical, mechanical, pneumatic, and hydraulic skills to diagnose complex issues. * Provide technical support for installation, commissioning, and acceptance testing (FAT) of new equipment. * Act as a technical reference point for colleagues and apprentices. Cross-Functional Collaboration: * Work with Production, Quality, and Engineering teams to ensure efficient factory operation. * Communicate issues, progress, and solutions through formal and informal meetings. * Build strong relationships to support uptime, quality, and safety goals. Electrical Maintenance & Fault‑Finding: * Lead on electrical diagnostics and permanent fault resolution across injection moulding machinery, drives, safety circuits, and ancillary equipment. * Support electrical installations and carry out fault‑finding on electrical facility systems, ensuring safe, compliant, and reliable operation of site services and building infrastructure. * Act as the primary point of contact for electrical breakdowns requiring in‑depth analysis. Essential Experience & Candidate Attributes Required: Proven experience working as an Electrical Maintenance Engineer gained from either manufacturing or engineering. ONC / NVQ Level 3 / HNC or equivalent in Electrical Engineering. Completed Apprenticeship in Electrical Engineering. 18th Edition. C&G 2391. Strong fault finding experience on Electrical Systems. Understanding of H&S regulations and safe systems of work. Experience with CMMS platforms. Competence with pneumatics, hydraulics, variable speed drives. Knowledge of RCA tools (5 Whys, fishbone, etc.) Strong problem‑solving mindset with structured approach. Effective communicator able to articulate technical findings to non‑technical colleagues. Proactive and self‑motivated, with a drive for continuous improvement. Calm and methodical under pressure. Team player who collaborates across functions. The successful candidate will work static night shift comprising of Monday to Friday 22:00 to 06:00 however there may be a requirement for you to train on weekly shift rotation of Monday to Friday 06:00 to 14:00 and Monday to Friday 14:00 to 22:00 for the first couple of months prior to starting work on night shift. If you are an experienced Electrical Maintenance Engineer, can commit to a static night shift and are looking for a new challenge, please submit an up to date CV by using the ‘apply’ button below. By applying for this position, you confirm that you consent to the processing of your personal data in accordance with the General Data Protection Regulation (GDPR) for the purposes of recruitment, employment and working finding service

An opportunity to work on our BAM Nuttall/Keir JV project in Plymouth, spanning over the next 5 years PAYE basis £400 - £440 per day depending on experience/qualifications Paid Holidays: 30 days per year (including bank holidays) Must Have: • Time-served Mechanical engineer or equivalent (e.g., NVQ Level 3) • Must have as a minimum an CSCS Gold Card – Pipefitter, Mechanical Engineer or equivalent • SSSTS (Site Supervisor Safety Training Scheme) or SMSTS (Site Management Safety Training Scheme • Strong working knowledge of Mechanical systems and safe isolation practices. • Demonstrable experience supervising Mechanical installation works on construction or industrial projects. • Ability to interpret Mechanical drawings, RAMS, and permit-to-work systems. • Strong communication, leadership, and decision-making skills. • A proactive safety-focused mindset with the confidence to challenge unsafe work. • Asbestos Awareness • First Aid / Emergency First Aid at Work This role is site based - Monday to Friday 45 hours per week 07:30am - 17:00pm Key Responsibilities: Oversee Mechanical works to ensure compliance with safe systems of work, permits, specifications, and drawings Support the Authorised Person (AP) in maintaining effective Mechanical safety systems Supervise Mechanical operatives and subcontractors, ensuring correct competence, training, and authorisation Ensure RAMS and permits are fully understood and followed on site Identify, report, and escalate Mechanical hazards and unsafe conditions Manage testing, flushing, pressure testing, and commissioning activities Deliver toolbox talks, safety briefings, and clear safety communications Coordinate with supervisors, engineers, and planners to ensure safe work sequencing Maintain inspection, calibration, and equipment records Support audits, inspections, and compliance reviews Promote a strong Mechanical safety culture and continuous improvement Support mentoring and competence development of Mechanical personnel Some Benefits: Pension Training and upskilling provided Safe working environment Life Insurance Secure regular income Lodge/ Digs can be available. So, if you want to work for a main contractor that cares about their tradesperson, then this is your opportunity to apply and join the project now! Reliable Contractors Limited are passionate about Equality Diversity and Inclusion continuously working towards best practice and adhering to government legislation. We are a firm believer in Fairness Inclusion and Respect

Alstom is the UK & Ireland’s leading supplier of new trains and train services, and a leading signalling and rail infrastructure provider. Alstom have built, or are building, just under 40% of the UK mainline train fleet; as well as the entire fleets in service with London Underground and Dublin Luas. We provide the widest range of smart solutions in the rail market, from innovative high-speed rolling stock, metros and trams to maintenance, modernisation, infrastructure and signalling. Employing 6000 people, we design and build trains at Derby, the UK’s largest train factory; and operate major sites at Widnes, Crewe, Ilford and Plymouth, and 30 train services depots across the UK and Ireland. Overview At Alstom, we are pioneering the next generation of smart, safe, and sustainable train systems. We are now looking for an Electronic Test System Development Lead — a technically strong, proactive, and collaborative engineer who can lead the design and deployment of advanced test systems for our Train Management and Control products. This is a key engineering role within our Industrialisation Team, driving excellence in product quality, manufacturing readiness, and test system innovation.As the Electronic Test System Development Lead, you will oversee the full lifecycle of manufacturing test solutions — from requirements gathering and system design to validation, deployment, and continuous improvement. You will work closely with Engineering, Manufacturing, NPI, and Industrialisation teams to ensure that our products are tested efficiently, reliably, and in compliance with the highest standards. This position is ideal for someone who enjoys combining electronic engineering, embedded system testing, and hands‑on problem‑solving with leadership and technical ownership. Responsibilities: Test System Architecture & Development Design, develop, validate, and maintain electronic manufacturing test systems and platforms Build and optimise automated test sequences, scripts, and programming tools Apply Design for Test (DFT) principles and ensure compliance with internal test strategy standards Support the creation and review of hardware test specifications and FAT (Factory Acceptance Test) software Industrialisation & Production Support Deploy new test systems into production and manage upgrades of existing platforms Provide expert troubleshooting, root‑cause analysis, and corrective actions for test system issues Drive continuous improvement across test capability, uptime, and manufacturing efficiency Maintain strong configuration management of all test means and related documentation Strategy, Governance & Cross‑Functional Collaboration Contribute to the overall Product Test Strategy and Industrial Test Roadmap Support tender quotations for new or upgraded industrial test systems Ensure compliance with Alstom EHS standards and relevant external regulations Collaborate with design engineering teams to influence testability early in the product lifecycle Training & Leadership Provide guidance and technical leadership to Test Engineers and production stakeholders Train shop-floor workers and EPU (Elementary Production Unit) managers on new or updated test systems Support capability development and ongoing qualification of all test‑related personnel Education & Experience Degree in Electrical Engineering, Computer Science, Electronics, or a related discipline Experience or strong understanding of test engineering within a manufacturing environment Technical Competencies Familiarity with electronic test systems, automated test equipment, and DFT principles Understanding of hardware test specification creation and FAT processesKnowledge of configuration management practices Experience with C# or Python is beneficial (but not essential) Personal Skills Strong communication and teamwork abilities Logical, analytical mindset with effective problem-solving skills Ability to work effectively across engineering, production, and industrialisation functions A passion for continuous improvement, learning, and technical excellence Profile: This is a key engineering role within our Industrialisation Team, driving excellence in product quality, manufacturing readiness, and test system innovation.As the Electronic Test System Development Lead, you will oversee the full lifecycle of manufacturing test solutions — from requirements gathering and system design to validation, deployment, and continuous improvement. You will work closely with Engineering, Manufacturing, NPI, and Industrialisation teams to ensure that our products are tested efficiently, reliably, and in compliance with the highest standards. This position is ideal for someone who enjoys combining electronic engineering, embedded system testing, and hands‑on problem‑solving with leadership and technical ownership

KierBAM are a Joint Venture (KBJV) partnership between Kier and BAM. We are currently delivering the redevelopment project at a Royal Navy site located in Plymouth and we are seeking a Quality Engineer. Due to the site being a high Security Military Naval base, additional security checks will need to be made SC level of security clearance is required. These checks can take up to 8 weeks to process.Only candidates holding a British Passport can be considered for this role. Making Possible Work with Site Teams regarding the effective implementation of the Quality Management Systems and Contract requirements and the compilation of records to demonstrate the conformity of the works. Key Responsibilities & Duties: Ensuring that an effective Quality Management System is being operated and maintained at all levels. Providing an independent channel of communication on quality, initiating necessary action to resolve deficiencies and ensuring satisfactory solutions have been achieved. Ensuring internal audits are undertaken in accordance with the Audit Schedule and that any adverse findings, including those raised by others, are closed out in a timely manner. Preparing, reviewing and evaluating Inspection & Test plans including those of sub-contractors. Aiding the delivery teams in ensuring timely progressive sign-off of the ITPs by attending weekly meetings with the Client. Ensuring the material approval process is maintained by the inspection of materials delivered, meeting project requirements and all appropriate certification is obtained and tracked. Reviewing Lifetime Quality Records throughout the progression of the works and supporting timely submission of handover packages. Providing guidance and assistance on Quality matters. Providing site training/mentoring on the requirements of the Quality Management Systems. Encouraging feedback from all employees and sub-contractors on possible areas of improvement and investigating the benefit of any employee recommendations regarding Quality matters. Evaluating Non-conformances to identify any apparent trends and providing timely reports on NCR status and trends to the Project Manager and the company Q&E Manager. Encouraging the philosophy of Continuous Improvement. Who are we looking for? Academic Qualifications - Civil Engineering, Quality, Construction related Qualification (HNC, BSc, MSc, BEng, MEng) CSCS - White PQP/AQP Whats in it for you? Competitive salary A wide range of family-friendly policies Company car/car allowance/travel allowance 8 % matched pension contributions Private healthcare Life assurance 26 days holiday 2 wellbeing days 1 volunteering day Personal and professional development About BAM Building a sustainable tomorrow. Thats our mission and our promise at BAM. Its how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe. We strive to create an environment where everybody feels welcome and valued.Were on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics. The application process BAM is committed to ensuring a fully inclusive recruitment and onboarding process, so if at anytime you feel you may need any reasonable adjustments, do not hesitate to speak with one of our team, and we will do our best to support you. TPBN1_UKTJ

Job Title: Project Controls Engineer Location: Plymouth (Onsite - minimum 4 days per week) Sector: Construction / Defence (MOD Marine Project) Security Clearance: Must be eligible for SC Clearance About the Role We are seeking a capable and detail-oriented Project Controls Engineer to join a Tier 1 construction company delivering a high-profile MOD marine project in Plymouth. This is a critical role supporting the successful planning, monitoring, and delivery of complex construction works. Working closely with the planning team and schedulers, you will help ensure that the construction programme is robust, accurate, and effectively communicated to the operational delivery teams responsible for building the project. What Does a Project Controls Engineer Do? As a Project Controls Engineer, you act as the backbone of project performance management. Your role bridges planning, cost, risk, and progress tracking to ensure projects are delivered on time and within budget. Key functions include: Developing and maintaining project schedules alongside planners and schedulers Monitoring progress against the construction programme Identifying risks, delays, and performance issues early Producing reports and dashboards to inform project decision-making Supporting forecasting of timelines, resources, and costs Ensuring alignment between the programme and on-site delivery activities Key Responsibilities Collaborate with planning and scheduling teams to develop and maintain detailed project programmes Track and analyse project progress, highlighting variances and proposing corrective actions Support the operational delivery team with accurate, up-to-date programme information Assist in risk management, including identifying potential delays and mitigation strategies Produce regular reports on schedule performance, milestones, and project health Maintain data integrity across project control systems and tools Contribute to continuous improvement of project controls processes Requirements Experience in project controls, planning, or project management within construction or infrastructure Understanding of construction programmes and project delivery processes Ability to interpret and analyse complex schedules and data Strong communication skills to liaise with both technical and operational teams Proficiency in project controls tools (e.g., Primavera P6, MS Project, or similar) Highly organised with strong attention to detail Security & Site Requirements Must be eligible to obtain SC Clearance Willingness to work onsite in Plymouth a minimum of 4 days per week Ability to work on a secure, high-profile MOD project environment Desirable Experience on defence, marine, or major infrastructure projects Knowledge of cost control, risk management, or earned value management (EVM) Engineering or construction-related qualification Why Join? Opportunity to work on a nationally significant defence project Join a leading Tier 1 construction organisation Collaborative team environment with exposure to major project delivery Career development within project controls and construction management If you are looking to develop your career in project controls and play a key role in delivering complex infrastructure, we would like to hear from you

Quality Engineer – Plymouth (Devonport Royal Dockyard) Contract: Full-time, 42.5 hours per week (08:00–17:00) Recruiting via Carmichael UK Carmichael UK is recruiting for an experienced Quality Engineer to join a major infrastructure redevelopment programme at a high-security Royal Navy site in Plymouth. This is an excellent long-term opportunity to support the delivery of complex works within a live MOD facility. The Role As a Quality Engineer, you will support project delivery teams by ensuring that robust quality management processes are embedded, maintained, and continuously improved throughout the project lifecycle. You will act as a key point of independent quality assurance across site activities, supporting progressive handover, maintaining compliance, and ensuring that work meets strict regulatory, technical, and client standards. Please note: This role requires SC-level security clearance. Candidates must: Hold a passport from a NATO or MISWG member country Have lived in the UK for the past 5 years Security checks may take up to 8 weeks to process. Key Responsibilities Ensuring the Quality Management System is implemented effectively across the project Providing independent communication on quality issues and ensuring appropriate resolutions Completing internal audits in line with the Audit Schedule and closing out findings promptly Preparing, reviewing, and evaluating Inspection & Test Plans (including subcontractor ITPs) Supporting progressive sign-off of ITPs and attending weekly client meetings Managing the material approval process and verifying delivered materials meet project requirements Reviewing Lifetime Quality Records and supporting timely handover documentation Offering guidance, support, and mentoring on quality standards and processes Delivering training on Quality Management System requirements Encouraging and investigating feedback and improvement recommendations Monitoring and reporting on NCR trends to Project and Quality Leadership Promoting a culture of continuous improvement across the project What We’re Looking For Academic qualification in Civil Engineering, Quality, or Construction (HNC, BSc, MSc, BEng, MEng) CSCS White PQP/AQP Experience in quality roles within construction or infrastructure environments Strong understanding of quality systems, audits, and progressive assurance Ability to work within high-security, highly regulated environments Strong communication and stakeholder engagement skills Apply Now If you are a Quality Engineer looking for a challenging and rewarding role on one of the UK's most significant infrastructure programmes, we’d love to hear from you. Apply today through Carmichael UK

Senior Process Engineer / CI Engineer (24593/611) Plymouth, Devon Plymouth (PL6) Salary: £45,000 - £50,000 Excellent Pension Package Share Buy Scheme Onsite Gym On going Training 25 Days holiday Free eye tests Discount Dental CarePlymouth based manufacturing company, known for their high-quality products, is seeking a talented Senior Process Engineer / CI Engineer to the growing team. The company supplies to some of the largest companies worldwide and is looking for candidates who meet the following criteria to apply. Responsibilities include: Drive operational excellence by developing and refining manufacturing processes to ensure high-quality products and efficient operations. Collaborate with cross-functional teams to design and implement process improvements that boost productivity and reduce costs. Leverage lean manufacturing principles to identify and eliminate waste, driving continuous improvement and innovation. Ensure regulatory compliance and maintain a safe working environment by adhering to health and safety standards. Troubleshoot technical issues and implement corrective actions to prevent recurrence. Foster strong relationships with stakeholders, suppliers, and partners to build a collaborative and effective network. Knowledge, Skills & Experience: Bachelor's degree in Mechanical, Manufacturing or Chemical Engineering or related field with a strong foundation in process engineering principles. Significant experience in process engineering, with a track record of successfully optimizing manufacturing processes and driving operational improvements. Excellent knowledge & implementation of lean manufacturing principles and continuous improvement methodologies. Excellent communication, interpersonal, and problem-solving skills, with the ability to work effectively in a fast-paced environment. Adaptability and flexibility to navigate changing priorities and challenges in a dynamic industry.Suitable candidates should apply immediately by applying to our Managing Consultant for this vacancy- Ashley Reynolds Job Reference No: Senior Process Engineer / CI Engineer (24593/611) If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business

TQR are working exclusively with a global Manufacturer based at their Plymouth site to recruit an experienced Process Engineer at their Plymouth site. As a key member of the Engineering function, the successful candidate will support safe, reliable, and efficient operation of the site’s moulding and extrusion processes and associated equipment. The role combines technical problem solving with process optimisation, driving quality, repeatability, and productivity through robust process control, standardisation, and technical support. You will Work closely with Production, Maintenance, and Quality, and will lead technical initiatives that enhance first-time yield, reduce cycle time, minimise scrap by strengthening mould performance, improve process capability (CP/CPk) and advancing machine-setting practices. Key Responsibilities: • Develop, document, and optimise moulding process parameters to achieve consistent quality and performance., • Lead troubleshooting of process-related issues on moulding machines, tooling and auxiliary equipment, ensuring rapid root-cause identification and sustainable corrective actions., • Support the introduction, commissioning, and validation of new moulds and tooling, ensuring correct set-up, safe handover, and adherence to the tooling commissioning process., • Champion the use of scientific moulding techniques and data-driven decision making to enhance process robustness., • Collaborate with Maintenance and the CI Lead to drive TPM activities focused on process capability and equipment uptime., • Implement and support SMED activities to reduce changeover times and increase flexibility., • Support the development and maintenance of process documentation (SOPs, setup sheets, validation reports)., • Provide technical training and coaching to setters and operators to build process understanding and ownership., • Participate in trials, automation integration and continuous improvement projects that enhance quality, throughput, or cost efficiency., • Support engineering change management and ensure process alignment with Quality and Validation standards., • Promote a culture of right-first-time performance, teamwork, and continuous improvement. Essential Experience & Candidate Attributes Required: • A minimum of a HNC (or equivalent) in a relevant engineering discipline. In the absence of this qualification a time served Process / Manufacturing Engineer may also be considered., • Proven experience in moulding or extrusion process engineering (rubber, silicone, or plastic moulding environment)., • Strong understanding of moulding principles, tooling design, and machine control systems., • Hands-on experience with process optimisation, validation, and troubleshooting techniques., • Knowledge of TPM, SMED, Lean/CI principles and Six Sigma., • Data-driven approach to problem-solving, comfortable using SPC, capability studies, and DOE where applicable., • Effective communicator and team player, able to influence across departments and work collaboratively with production and maintenance teams., • Methodical, safety-conscious, and resilient under pressure. This is a day shift position working Monday to Thursday 08:30 to 17:00 and Friday’s 08:30 to 14:30. Please note, out client does not hold a skilled worker visa sponsorship licence, therefore it is essential that candidates must have the immediate right to work in the UK. If you are an experienced Process Engineer from a moulding background and are looking for a new challenge, please submit an up to date CV by using the ‘apply’ button below. By applying for this position, you confirm that you consent to the processing of your personal data in accordance with the General Data Protection Regulation (GDPR) for the purposes of recruitment, employment and working finding service

LTQR Engineer Plymouth – Devonport Royal Dockyard 42.5 hours per week | 08:00 – 17:00 Reporting to: LTQR Manager CarmichaelUK are seeking an experienced LTQR Engineer to join a major infrastructure upgrade project at Devonport Dockyard. This is a unique opportunity to work on one of the UK’s most significant defence programmes, supporting the delivery of Lifetime Quality Records (LTQR) and construction assurance across a highly regulated environment. Due to the sensitive nature of the site, BPSS security clearance is required (process may take up to 8 weeks). Applicants must hold a valid passport from an EU, NATO, Five Eyes, or MISWG member country and have resided in the UK for the past 5 years. The Role As an LTQR Engineer, you will play a key role in ensuring progressive delivery of compliant LTQR packages and construction assurance deliverables. You’ll work in a live MOD facility, collaborating with stakeholders across the project, supporting training, and driving quality assurance to the highest standards. Key Responsibilities Review & Compliance: Assess LTQR packages for completeness, accuracy, and compliance. Support technical reviews, monitor performance, and step in to assist with package compilation where required. Reporting & Coordination: Provide progress updates, risk insights, and maintain trackers/dashboards. Support the LTQR Manager and engage confidently with stakeholders. Training & Guidance: Deliver training and one-to-one guidance to ensure consistency in process and standards. Continuous Improvement: Share lessons learned, promote digital transformation, and champion best practices. Health, Safety & Wellbeing: Uphold site safety, equality, and respectful behaviour. Information Security: Protect sensitive information in line with project requirements. About You We’re looking for someone with the technical knowledge and confidence to influence quality standards on a complex project. ✅ Experience: Proven background in Construction Assurance Packages, LTRs, LTQRs, or similar assurance models (major infrastructure experience such as HS2, Tideway, Crossrail desirable). Nuclear/defence experience is advantageous but not essential. ✅ Qualifications: PCQI/MCQI membership, HNC/HND, NVQ Level 4/5, or relevant degree. Vocational backgrounds in Construction Quality will also be considered. ✅ Technical Skills: Ability to interpret technical drawings, ITPs, and specifications. Confident in reviewing evidential submissions, identifying inconsistencies, and engaging with supply chains. Suitable for Section/Site Engineers looking to transition into Quality roles. ✅ Digital Proficiency: Strong Excel skills required; Power Query/Power BI advantageous. Experience with ASite, ProjectWise, Synchro, or Bentley Systems expected. Awareness of BIM processes desirable. ✅ Communication: Excellent written and spoken English, with strong attention to detail, consistency, and structured reporting. ✅ Personality: Calm, approachable, and methodical, with the confidence to uphold standards in fast-paced environments. Location & Flexibility Hybrid working – typically 3 days per week at the Site Project Office in Devonport, with flexibility based on project needs

Automation Engineer - Plymouth Excellent Salary + Bonus + Benefits Rare opportunity to put your own stamp. Excellent investment into improving the site & equipment. Excellent opportunity to grow your role within the site & group. A global manufacturing business and market leader within its sector is looking to appoint an Automation Engineer to support the continued development of its Plymouth operation. With around 150 employees across two adjacent manufacturing facilities, including a brand-new state-of-the-art site, the business is investing heavily in the future of advanced manufacturing and automation. This is a brand-new role created due to growth and investment and offers a rare opportunity for someone to genuinely put their own stamp on a manufacturing operation. There are still a number of labour-intensive processes across the facility, creating huge scope for automation, robotics and process improvement. The successful candidate will play a key role in developing and delivering the sites automation strategy, helping transform the operation into a more advanced and highly automated manufacturing environment. Importantly, this is not a role maintaining existing systems or inheriting legacy projects. This is an opportunity to build something new from the ground up and become a key figure within the wider groups manufacturing strategy. The Role Identifying opportunities to automate existing manufacturing processes Supporting the introduction of robotics, automated machinery and smart manufacturing technologies Leading automation and continuous improvement projects across the site Working closely with production and engineering teams to improve efficiency, quality and productivity Supporting the sites progression towards Industry 4.0 and advanced manufacturing About You Experience within automation engineering, manufacturing engineering or industrial automation Strong understanding of automated manufacturing processes and continuous improvement Experience delivering engineering or capital projects within manufacturing Hands-on approach with strong problem-solving ability Someone motivated by the opportunity to create and develop new automation capability Why Apply? Opportunities like this are genuinely rare. This is a chance to join a growing international manufacturer in a highly visible role where you can influence long-term automation strategy, introduce new technologies and make a lasting impact on the future direction of the site. TPBN1_UKTJ

Process Engineer - Lean / Continuous Improvement. Driving a culture of continuous improvement across teams. Experience in record leading change & improvement projects.

Apply now to be part of a team committed to quality, innovation, and continuous improvement. This is a hands-on role supporting quality assurance activities across our West Sussex and Plymouth sites, ensuring compliance, driving continuous improvement, and meeting customer and project requirements.

Driving improvements across hygiene, food safety and quality. Working closely with Production and Engineering teams. Confidence working cross-functionally with Operations and Engineering.

Support continuous integration and delivery pipelines. Identify defects, risks, and areas for improvement.

Caralex Recruitment Limited has been asked to recruit a Senior Quality Assurance Manager for a construction company that has projects in Surrey and the surrounding counties.The role will entail auditing, risk reviewing, quality inspection and reporting across a broad area of both internal processes,

Driving GMP, hygiene, and continuous improvement standards. Knowledge of QMS management and continuous improvement methodologies.

Proficient with quality systems, reporting tools and data-driven continuous improvement methods. Promote continuous improvement and digital innovation with the quality function through effective use of systems, reporting tools and technology. They are currently seeking an experienced Quality Manager

Driving improvements across GMP, suppliers, and systems.

Lead continuous improvement initiatives and share best practices across services. Passion for person-centred care and continuous improvement. Passion for person-centred care and continuous improvement.

Work closely with R&D, Manufacturing, and Engineering teams to support supplier selection, design-for-manufacture activities, and process improvements. Bachelor’s degree in Engineering or a related technical discipline. Ability to read and interpret engineering drawings, tolerances, and technical

A key part of the role will involve supporting external audits, monitoring technical performance trends, and helping to drive continuous improvement across the site. Strong knowledge of HACCP and food safety systems is essential, along with experience supporting audits and driving compliance improve

You will play a key role in ensuring compliance with applicable regulations and internal procedures, supporting audits and inspections, contributing to continuous improvement initiatives, and promoting a culture of quality across the business. The primary purpose of this role is to support the Direc

General support of the delivery team and aiding in continuous improvement of QHSE processes. Continuously improve QHSE systems, processes, and performance.

The position combines hands‑on technical work with significant influence over QA processes, tooling and continuous improvement. Contribute to continuous improvement of verification and validation processes, tools and best practices. Collaborate with hardware engineers, systems architects and AI/ML

Lead quality strategy, systems, and continuous improvement initiatives.

Supporting policy, governance, and continuous improvement initiatives across water quality operations. Driving improvements across hygiene, QA/QC processes, and operational compliance.

To sign off any equipment or area where engineering/maintenance work has been carried out, ensuring it is free from any source of contamination before production recommences.

Background in electrical site engineering, HV systems, transformers, substation maintenance or similar field-based engineering work. We are working with a well-established engineering business who are looking for a Service Engineer to join their field services team supporting power and distribution