Electrical apprenticeship jobs in United Kingdom - Page 2

Goods Inwards Inspector Manufacturing / Defence Location: Bolton | Onsite Manufacturing Facility As a trusted partner to the UK Ministry of Defence, our client is seeking an experienced Goods Inwards Inspector to join their established Bolton site. This role plays a critical part in ensuring all incoming materials meet purchase order, contractual, and quality requirements within a highly regulated, safety-critical manufacturing environment. You will support production schedules, maintain full compliance, and help safeguard quality standards across the supply chain. Key Responsibilities Inspect and verify all incoming goods against purchase orders, contracts, and quality requirements Formally accept procured products in line with approved standards and conditions Read and interpret engineering and assembly drawings, including dimensional tolerances Inspect components for damage, surface finish, paint defects, and first-off requirements Complete and maintain accurate inspection and quality documentation Validate delivery paperwork, ensuring full traceability and compliance Meet agreed inspection turnaround times to support manufacturing schedules Identify, segregate, and control non-conforming material, raising NCRs as required Support product verification through audits, including PCB inspection where applicable Maintain compliance with manufacturing, quality, and safety procedures Essential Qualifications You must hold one of the following: Electrical / Mechanical Engineering or Manufacturing Level 3 Apprenticeship (Advanced or L3 Standard) OR Electrical / Mechanical Engineering or Manufacturing Level 3 academic qualification (ONC, Diploma, etc.) AND Electrical / Mechanical Engineering or Manufacturing Level 3 vocational qualification (NVQ) (NVQ not required where a full L3 apprenticeship standard has been achieved) Essential Experience Proven goods-in inspection experience within a manufacturing environment Strong understanding of inspection requirements for safety-critical components Stores and incoming materials experience is essential (Mechanical inspection experience alone is not suitable for this role) Additional Skills Manual handling and ESD awareness SAP experience desirable Security Clearance British Citizen or Dual UK national with British citizenship. Successful candidates will be required to complete BPSS clearance after offer stage. What Happens Next If your application meets the selection criteria, a talent acquisition specialist will contact you to arrange a structured screening call focused on your experience and suitability for the role. TPBN1_UKTJ

Company description: Mller UK & Ireland is wholly owned by the Unternehmensgruppe Theo Mller which employs over 24,000 people throughout Europe. In the UK, Mller develops, manufactures and markets a wide range of branded and private label dairy products made with milk from more than 1,700 British farmers. The Mller brand is ranked at No.7 in The Grocers Top 100 list of Britains Biggest Brands, and is also the 7th most chosen brand in the UK. Job description: We are seeking an Engineering Technician to join us in our Blow Moulding Department at our Severnside Dairy As an Engineering Technician youll provide safe front line reactive maintenance. Actively identify root cause and bring the equipment back in to service as quickly as possible as well as actively seeking and identifying cost effective improvements to site assets and equipment, improving efficiency and reliability. Engineering Technician (Blow Moulding) Severnside Permanent contract: 4 on 4 off (2 days & 2 nights, 7-7) Key responsibilities as an Engineering Technician: To ensure effective handover of information across shift Uses PMS to support prioritisation and problem solving (RCFA) To diagnose faults and to test , repair and maintain Mechanical / Electrical equipment To observe, recognise and report on machinery or component defects or symptoms of impending failure and provide CMMS data Contact OEM's and other suppliers for technical support as and when required and expedite parts when not available on site Lead shift based problem solving where corrective actions aren't clear Working as ONE TEAM with First Line Response Technician Coaching of operators with asset care tasks Identify & implement Improvements Identify life cycle issues and raise these with possible recommendations Use and support simple 5WHY OE techniques / RCA techniques through to 100 year fix Use and support departmental 5s programmes for workshops and stores What were looking for: Recognised apprenticeship Experience within maintenance Manufacturing Industry Experience Mechanical/Electrical Biased ONC/HNC IOSHH / Nebosh Desirable Electrical qualification Multiskilled engineer experience Please note this is a 4 on 4 off Shift role Days/Nights rotating (2 Days 2 Nights) Whats in it for you? Competitive salary Generous annual leave allowance (276 hours) Access to Muller Rewards Platform Long term career with a company that invests in you! Career development and defined pathways Onsite car park Supportive team environment Life assurance Pension scheme 5% annual bonus (company target dependant) #hiring TPBN1_UKTJ

Carding Maintenance Engineer Shifts: Days (M - F) or Shift Based considered Salary: £60,000 (+ up to £8,000 relocation support) Somerset Are you a time-served engineer with hands-on carding experience? Do you understand fibre behaviour, machine tolerances and the fine adjustments needed to keep carding lines running smoothly? Yolk Recruitment are supporting a rapidly growing textile manufacturer who have increased turnover by more than 150% in five years. With continued investment across the site, they're looking for a Carding Maintenance Engineer to support with carding machinery performance, reliability and quality. This is a rare opportunity to relocate to the South West and join a specialist process-driven manufacturer where your carding experience genuinely matters. This is what you'll be doing You'll be responsible for maintaining, repairing and optimising a range of carding machinery and fibre-processing equipment. Your work will ensure stable production, consistent web formation and minimal downtime. Responsibilities include: 1. Carrying out planned preventative maintenance (PPM) on carding machines 2. Responding to mechanical and electrical breakdowns across the carding lines 3. Diagnosing faults on cylinders, strippers, doffers, workers, lickers-in, feed systems and delivery sections 4. Performing alignment, clearance setting, tensioning and fine adjustments to maintain fibre flow and web quality 5. Working on machinery such as Trtzschler, Spinnbau, Herguth, TAM or similar carding equipment 6. Supporting rebuilds, strip-downs and card clothing changes as required 7. Collaborating closely with production teams to resolve quality issues and improve machine performance 8. Contributing to root cause analysis, asset care and continuous improvement activity 9. Sharing knowledge with apprentices, fellow engineers and operators to build internal capability 10. Ensuring all work is completed safely and in line with company procedures Experience & Qualifications Essential: * Proven hands-on experience with carding machinery (standard cards, strippers, or equivalent) * NVQ Level 3 or equivalent in Mechanical Engineering * Strong mechanical fault-finding and strip-down ability * Good electrical awareness (motors, sensors, drives, inverters) * Experience working within textiles, nonwovens or fibre-processing environments * Ability to work independently and diagnose machine performance issues * Understanding of web formation, fibre movement and carding tolerances Desirable: * Experience with Trtzschler, Spinnbau, Herguth, TAM or similar brands * Apprenticeship in carding or textile engineering * Exposure to continuous improvement or reliability projects And this is what you'll get in return: • £60,000 basic salary * Up to £8,000 relocation support for candidates moving to the Bridgwater area * 22 days holiday + 8 bank holidays (rising to 25 with service) * Christmas & New Year shutdown * Pension - 4% employer / 5% employee * Full company uniform * On-site parking * Access to Wellbeing 360 - discounts, GP services, wellbeing tools and more * Bike2Work scheme * A secure long-term role with a financially strong and growing manufacturer Are you up to the challenge? If this sounds like the right fit, I'd love to hear from you. Please get in touch today with engineering specialist recruiter Liam Reid. Apply with your CV - and feel free to include a short note about your experience with carding machinery. We also offer a referral scheme if you know someone suitable. Please note: due to the high volume of applications, we may not be able to contact everyone. If you haven't heard back within 7 days, please assume you have not been shortlisted on this occasion. TPBN1_UKTJ

Our client are seeking an Electrician to work on a water treatment site near Sandown, on the IOW. Travel can be provided from Portsmouth however, at no cost to the contractor. As this role is working on a water treatment site, ideally candidates will have previous experience within the water sector, although candidates with an industrial background can be considered. Start: ASAP Duration: Atleast 6 weeks Rate: £27-28p/hour Hours: 45 per week Candidate Requirements: JIB Gold Card 18th Edition Relevant Apprenticeship/NVQ etc. Own Tools & PPE Industrial Experience Job Outline: Candidates should be competent with all aspects of industrial installation works/containment. Able to diagnose and rectify faults. This includes working on electrical controls, pumps, motors, control panels, instrumentation and other electrical systems. Adhering toonsite health and safety regulations Collaborating with other trades and end client on site. Able to work independently or as part of a team. TPBN1_UKTJ

My client, based in Knowsley, Merseyside, is now recruiting a Maintenance Technician to join their team at their manufacturing site. The successful Maintenance Technician will work as part of a small friendly team and will provide planned and reactive support for the production machinery on site. This is a fantastic opportunity to join a financially stable company who are expanding, offering additional training and qualifications, working rotational shifts Monday to Friday and paying additional payments when working the late shift. Maintenance Technician Requirements: Must have completed a recognised apprenticeship and hold an Electrical Engineering qualification to the minimum of Level 3. Proven electrical fault finding and diagnostic skills. 18th Edition is advantageous. Must have strong mechanical skills. Pneumatics experience is essential. CNC experience is advantageous. Ability to read and interpret electrical and mechanical engineering diagrams. Experience of working within a maintenance environment. Maintenance Technician Benefits: Salary £37,672 15% shift allowance paid when working late shift. Monday to Friday, rotational day shift pattern, 6am 14:00 followed by 14:00 22:00. 20 days holiday + Bank holidays. Company pension. Private healthcare. NOTE Our client encourages applications from candidates from both commercial and ex-military backgrounds, Royal Navy, British Army, Royal Air Force with an electrical engineering bias. TPBN1_UKTJ

Salary:Competitivesalary Benefits:Companysharesave scheme,Pension up to 8% matched, Life insurance up to 4x salary Location:Tilmanstone Ways ofworking:Sitebased Hours of work:4 on 4 off Days & Nights rotating 6am -6pm / 6pm- 6am Contracttype:Permanent Why Greencore? Following the combination with Bakkavor in January 2026, were one of the UKs leading creators of convenience food, driven by a simple purpose: to make every day taste better. As a vibrant and fast-moving business,wereproud to employ over 28,000 talented colleagues across 39 manufacturing sites and 21 distribution depots in the UK and the US. Together, we bring delicious food to life. Our products cover every meal occasion from breakfast through to dinner and dessert, with lunch and snacking in between. In FY25, our shared passion helped us achieve combined revenues of approximately £4bn.? Our extensive direct to store (DTS) network, with 17 depots across the UK, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring consumers enjoy thevery best, whenever and wherever they shop. Our site inTilmanstone, near Dover, Kent, employs around 850 people and produces millions of bags of leafy salads and prepared vegetables for a dedicated customer. The siteoperatesat a fast-paced, high-volume level. Whatyoullbe doing In this busy and exciting role, you will bring your engineering skills and problem-solving abilities to our team to helpmaintainand optimise our food and drink processing and packaging assets. Youllplay a key part in keeping production running smoothly, safely, and efficiently-ensuring that our equipment performs at its best to deliver high-quality products for our customers. Youllbe involved in a wide range of engineering activities, from planned and predictive maintenance to responding to breakdowns and implementing improvements. Working closely with operational teams,youlluse your technicalexpertiseto diagnose faults, carry out repairs, and contribute to continuous improvement projects that enhance efficiency, reliability, and profitability. Role Accountabilities : Prepare and carry out maintenance work on food and drink processing and packaging equipment. Conduct planned and predictive maintenance to optimise performance and prevent downtime. Respond promptly to breakdowns, carrying out repairs or corrective actions asrequired. Diagnose and resolve electrical, mechanical, instrumentation, automation, and pneumatic faults. Support operational teams with machinery changeovers, set-ups, and adjustments. Manufacture or repaircomponentparts tomaintainequipment reliability. Contribute to continuous improvement projects and technical performance reviews. Identifyand implement engineering solutions to improve efficiency and profitability. Maintainaccuratemaintenance and engineering documentation. Ensure maintenance tools and equipment are available, safe, and wellmaintained. Support and mentor team members to develop technical skills and competence. Participate in internal and external audits to ensure compliance with safety and quality standards. Whatwerelooking for Level 2 Maths/English; recognised Engineering Apprenticeship (C&G/EAL NVQ 3/4 or OAL FDEM). First-year requirements: IET Wiring Regs, Level 2 Food Safety, CMMS training, contractor control. Role develops multi-skilled capability with electrical bias. Strong problem-solving, communication and teamwork. Knowledge of SHE procedures. Experience in fault finding, maintenance planning, IT systems and following SOPs. Mechanical/electrical knowledge: hydraulics, pneumatics, motors, PLCs, sensors. Understanding of asset performance and spare parts management. Desirable: IOSH Managing Safely, FMCG experience, continuous improvement, condition-based monitoring, reliability techniques. Wereproud to be recognised in the Gender Equity Measure Top 100 for our commitment to gender equality. If this sounds like you, join us and grow with Greencore, and be a part of driving our future success. Whatyoullget in return Competitive salary and job-related benefits Holidays Pension up to 8% matched Life insurance up to 4x salary Companysharesave scheme Greencore Qualifications Exclusive Greencore employee discount platform Access to a full Wellbeing Centre platform Enhancedparentalleave and menopause policies Throughout your time at Greencore, you will be supported with on-the-job training and development opportunities to further your career. #LI-LM1 #CVL? TPBN1_UKTJ

Electrical Apprenticeship Assessor When registering to this job board you will be redirected to the online application form. Please ensure that this is completed in full in order that your application can be reviewed. For full time all year-round staff, we are offering a Welcome Bonus of £500*(*T&C's apply) Pro rata to FTE What we are looking for: • Qualified Electrician to a recognised qualification at Level 3, • Relevant experience of working within the industry, • Train and assess apprentices on electrical apprenticeship programmes (Level 2 and Level 3), • Ensure that associated tracking and monitoring activities ae undertaken and meet College and Awarding Body criteria, • A discounted on-site gym, Starbucks, sports hall, fitness class, osteopathy and day nursery, • 5-minute walk from Ewell East Station...

Commercial Gas Engineer ? Field-Based | Maintenance Department ? Basic Salary: Circa £60,000 Company Van Pension Private Health Care Are you a qualified Commercial Gas Engineer looking for a role where your expertise is valued, your development is supported, and your earning potential reflects your skillset? We're recruiting for an experienced Commercial Gas Engineer to join a growing Maintenance team. Reporting directly to the PPM Contracts Manager, you'll play a key role in delivering high-quality planned and reactive maintenance services across a diverse portfolio of sites. The Opportunity This is a hands-on, field-based role where no two days are the same. You'll be trusted to: * Deliver planned preventative maintenance (PPM) * Respond to reactive callouts and breakdowns * Diagnose and repair faults across commercial heating systems * Carry out minor project works * Maintain accurate site and compliance documentation (digital and hard copy) * Participate in an out-of-hours emergency call-out rota * Supervise engineering apprentices when required * Manage van stock and specialist components You'll also have the opportunity to broaden your knowledge across mechanical and electrical building services and develop professionally within a structured and accredited environment. What We're Looking For Essential Qualifications & Certifications: * Completed recognised apprenticeship in Gas/Mechanical Engineering (NVQ Level 3 or equivalent) * Current commercial gas qualifications including: * COCN1 * CODNCO1 * ICPN1 * CDGA1 * CIGA1 * CORT1 * ICAE1/LS * TPCP1A / TPCP1 * Full UK driving licence Essential Experience & Skills: * Strong experience in fault finding, rectification and planned maintenance * Solid knowledge of commercial heating systems * Sound understanding of Health & Safety legislation and safe systems of work * Ability to interpret technical drawings and specifications * Strong communication skills (written and verbal) * Good IT literacy (MS Office, Outlook, digital reporting systems) * Self-motivated, solution-focused and able to work independently Desirable: * Experience across domestic, industrial and commercial environments * Mechanical services, plumbing and heating background * Enhanced DBS (can be arranged) What You Can Expect * Basic salary circa £60,000 * Structured role within an ISO-accredited business (9001, 14001, 45001) * Supportive leadership and collaborative team environment * Varied workload across multiple client sites * Professional development opportunities * A company culture focused on safety, compliance and customer excellence This role requires flexibility, including agreed out-of-hours work and participation in an emergency call-out rota. Travel between sites is essential. Commercial Gas Engineer - Dartford Dartford Dartford Calibre Search promote equality in the workplace and we welcome applications from all suitably skilled or qualified candidates regardless of their sex, race, disability, religion/beliefs, sexual orientation or age. We act as both an employment agency and employment business. JBRP1_UKTJ

Position:Senior Technician Location:Bromley Area Salary:£35,000 - £40,000 per annum Job Type:Permanent 40hrs Closing Date:31st March 2026 Do you have a strong technical background and a passion for delivering high-quality service? Are you looking to take the next step in your career? We are looking for aSenior Technicianto support the maintenance and improvement of our technical systems, ensuring that all operations run smoothly and efficiently. Benefits: In return you get to work for a great company with like-minded people with a competitive salary and benefits package including: • Free access to Mytime Leisure & Golf for you AND one other.(worth up to £1,000 each year!), • 30 daysannual leave(including bank holidays). Additional leave with length of service., • Holiday purchase scheme., • 25% offfood and beverage and free hot drinks., • NEST pension., • Early Pay- withdraw a part of your salary in advance of the pay day., • New Employee Referral Bonus, • Exceptional achievement award scheme., • Supervise the team of technicians, offering support and guidance to ensure works are completed safely and efficiently, • Support the team to respond promptly and positively to service call requests received from the CAFM system, to assess the requirements of the job and conduct repairs as and where necessary and update the CAFM system., • Prioritise fabric/electrical/mechanical maintenance and repair work to achieve agreed timescales and response times., • Identify non-repairable faults in plant and machinery and promptly advise the Line Manager of findings, with recommendations regarding suitable replacement., • Ensure that compliance documentation is always completed and up to date., • Advise the on-site customer (manager) of any repair and maintenance issues that are likely to affect the smooth running of the site., • Apprenticeship or qualification in, Building Fabric, Electrical, Mechanical or Plumbing City & Guilds or Equivalent., • Full UK driving licence., • Previous building maintenance experience with fabric, electrical, mechanical, or plumbing qualifications, • Knowledge of Health and Safety, including risk assessments, permits to work and COSHH. We are an independent social enterprise on a mission to improve wellbeing through our range of accessible services. These include golf, swimming, gyms, bowling, social and health programmes at 20 locations across Bromley, the Midlands and Hampshire. We reinvest our profits into the long-term wellbeing of our local communities and our staff to ensure we deliver the best service possible. To date weve helped hundreds of thousands of people to live a happier and healthier lifestyle and you can become apart of giving back to the community! *All offers of employment are conditional upon you signing the contract of employment and: *Satisfactory health clearance; *Two satisfactory references; *Proof of attainment of qualifications; *Evidence of your right to work in the United Kingdom; and • Satisfactory Disclosure and Barring Service (DBS) check if needed for the role* Mytime Active applies its Equal Opportunities Policy at all stages of recruitment and selection. Mytime Active reserve the right to remove the advert for this role as required. JBRP1_UKTJ

Astute's Power Team are working with the owners of one of the UK's largest Energy from Waste Power Station. As part of their anticipated handover of their new Energy from Waste facility, they are looking to hire a Warranty Engineer on a 2 year Fixed Term Contract to oversee the handover and warranty phase. As Warranty Engineer you'll be acting as a central figure to oversee plant performance through the initial defects liability period. You'll monitor and evaluate plant performance to identify under performance and emerging defects. If you're interested and have the right skillset then please apply. Responsibilities and duties of the Warranty Engineer role: Reporting to the Engineering Manager, you will be responsible for: • Evaluate plant performance and availability against guarantees, • Assess costs with breakdowns and / or underperformance, • Provide availability reports, tracking ongoing defect resolution status, • Maintain warranty documentation through the clients documentation management system to track actions, • Understand OEM contractual requirements and liaise with EPC / OEM for warranty claims, • Coordinate with Maintenance, Engineering, Operations & Legal Team to monitor plant issues, • Identify known Latent Defects prior to handover, • Chari vendor meetings and report to management team any matters, • Track costs for rectifying issues for back charging purposes Professional qualifications We are looking for someone with the following: • Ideally relevant Engineering degree, • Apprenticeship trained with experience in Mechanical or Electrical Engineering, • IOSH or NEBOSH Personal skills The Warranty Engineer role would suit someone who has: • At least ten years' experience in an Engineering capacity on a Power Station or similar heavy process plant, • High Value Contract Management experience circa £2m, • Understanding of OEM warranty periods, • Proficient in IT Systems including CMMS, procurement systems, MS Office Suite etc, • Working experience to H&S legislation including COSHH, PUWER, PSSR, Electricity at Work etc Salary and benefits of the Warranty Engineer role • Highly competitive salary (ask for further details), • Bonus Package, • Pension, • Comprehensive benefits including medical, salary sacrifice EV scheme INDPOW #LI-RC1 Astute People are acting as an employment agency in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful. JBRP1_UKTJ

Are you ready to go on the road and take your technical skills to a dedicated network of customer sites? If so, then this could be the role for you? We are looking for a self motivated and independent Vehicle Engineer who can travel to our clients various workshops in a designated area providing: Your day starts when you start your vehicle! Day shifts – - 45 hour week Are you ready to go on the road and take your technical skills to a dedicated network of customer sites? If so, then this could be the role for you? In this role, no 2 days will ever be the same and the products that you work on will be diverse. HGV's, Ground Support GSE, RORO (Roll on Roll Off), Fire and rescue, Tractors and Tugs plus other bespoke operating platforms. We are looking for a self motivated and independent HGV Vehicle Engineer who can travel to our clients various workshops in a designated area providing: • Callouts, • Preventative Maintenance, • Emergency Breakdowns, • Pre-arranged servicing at rural sites, • MOT Preparation, • Engine work and diagnostic investigations, • Correction of running defects, • Chassis and fabrication work, • Hydraulics and pneumatics, • Improvement of vehicle standards A Class2 Licence would be beneficial. You will need to be a fully qualified Commercial Vehicle Technician or have been accredited via an authorised Apprenticeship. Benefits – you will start with 24 days annual holiday (plus bank holidays) per annum, you will also be enrolled in the pension scheme and qualify for the private healthcare scheme. If this role isn't for you but you are looking for a move, then please get in touch. Kautec Recruitment is a fast growing automotive people business that recruits the right way. HGV, heavy goods vehicle, commercial vehicle, RCV, refuse collection vehicle, tipper, sweeper, gritter, mechanic, vehicle engineer, vehicle technician, fitter, workshop. A problem solver with a can-do mindset Abiding by health and safety rules You will be travelling within an area of North London and Essex We require an excellent understanding of vehicle technology, and be capable of following the repair process from fault analysis to completion The personal qualities that my client are looking for are simple, these are the ethos of an exemplary team member that can represent the company in the best way possible; Reliable and punctual Enthusiastic, proactive and an innovative thinker JBRP1_UKTJ

We have an amazing opportunity for an experienced Electrician to work for one of the country's leading training providers. Sharing your knowledge and experience with new apprentices to realise their potential as you support, advise, and guide them through their apprenticeship training to become the next generation of Electricians !! Full training will be given and you will be rewarded with amazing Benefits. Location: London Candidates must have the following skills, experience, and qualifications to be considered: * Electrical NVQ Level 3 or equivalent * AM2 certified * Proven occupational experience * Good Presentation Skills * Good IT Skills * Full Drivers License You will receive: * 25 days of paid annual leave * Great Basic * 35 hours a week * 45 pence mileage * Occupational Sick Pay * Generous Group Personal Pension Scheme * Life Insurance * BUPA * Full BUPA Health check* * Eye care discount * Rewards staff discount scheme * Generous corporate wear allowance * Gym membership discount scheme * Season ticket loans * Free occupationally relevant training * Financial support towards occupationally relevant qualifications Due to the high volume of applications Recruited UK receives, we will make every effort to respond with feedback although this is not always possible. If you have not been contacted within 5 days then unfortunately you have not been successful on this occa...

Electricians may work on the installation, initial verification and testing, commissioning, and maintenance of low voltage (up to and including 1000 V or AC 1500 V DC) electrical and electronic equipment. Electricians can also work on the maintenance of electrical and electronic installations including automated production systems. They contribute to the design, development, construction, commissioning, operation and maintenance of products, equipment, processes, of electric systems or services. Duties typically include: • Comply with safety and environmental regulations, building codes, and industry standards, including 18th Edition Wiring Regulations (BS7671)., • Perform electrical installation, verification, maintenance, and testing on various voltages (AC/DC, single/three-phase)., • Conduct maintenance, inspections, and condition reporting for existing electrical systems as per manufacturer instructions and installation requirements., • Install wired and wireless solutions, ensuring compliance with 18th Edition BS 7671 and relevant standards while assessing electrical loads., • Install mains-powered life safety systems in industrial, commercial, and residential settings., • install electrical connections for heating and cooling systems in different installations., • Communicate and collaborate with project teams, clients, contractors, and stakeholders while ensuring data security., • Trave...

Working closely within the engineering & production team to ensure maximum efficiency Ensuring H&S is being implemented The Ideal background of a Multi Skilled Maintenance Engineer: FMCG experience ideal Knowledge and experience Fault finding with PLC's Electrical or Mechanical Apprenticeship

Datacentre Facilities Engineer Heathrow - with travel to other sites as required Please note, to be considered for this role you must be eligible for SC Clearance and full, UK driving license. You may or may not have experience of working in a Data Centre! We are looking for a Facilities Engineer who is keen to expand their knowledge into the high availability arena of data centres. You will probably have worked your way through an apprenticeship and be looking today to take on a more responsibility while being supported in obtaining further professional qualifications. Communication skills both Written and Verbal are vital as well as aptitude in reading and interpretation of technical documents, You must demonstrate good practical and problem-solving skills, be able to work both independently and as part of a team. We expect you to have working knowledge of LV Electrical systems, HVAC and Security Systems. The H&S of you and your colleges takes priority and you will be expected to undertake training in this area and as part of your induction process. Holding a full Drivin...

Shift Engineer Location: Sheffield, South Yorkshire Working Pattern: Full-time, Suez Shift Pattern (Days and Nights) Salary: Starting salary £40,000 increasing to £42,100 after probation About the role: Our client, a global leader in intralogistics and automation solutions, is seeking a skilled Shift Engineer to join their resident maintenance team at a busy e-commerce distribution centre. The successful candidate will play a key part in maintaining and optimising site performance. Youll deliver high-quality preventive and corrective maintenance, troubleshoot technical issues, and provide expert support to the Shift Manager. Working alongside a team of maintenance technicians, youll ensure maximum equipment availability while upholding the highest standards of health, safety, and compliance. Skills & Experience Apprenticeship-trained or qualified to ONC/HNC, BTEC, NVQ Level 3+, or Degree level in Electrical/Mechanical Engineering. Experience with automated systems (e.g. conveyors, sorters, cranes, robotics, or similar). Knowledge of PLC / control systems, WCS/WMS, or SCADA is desirable. Familiarity with CMMS / PPM systems. About Us: Wills Consultants is an independent recruitment consultancy specialising in engineering, finance and office professionals. Wills Consultants has an extensive client base that ranges from the thriving SME sector through to national and international PLCs. TPBN1_UKTJ

Maintenance Engineer Salary - £59,306 + Quarterly bonus 4 On 4 Off Days and Nights Excellent Company Benefits We are currently seeking a Multi-Skilled Maintenance Engineer with an Electrical Bias to join our engineering team at a busy manufacturing site in the Heart of Leicester. responsible for maintaining, fault-finding, and improving production machinery to ensure maximum uptime and efficiency. Joining the Engineering Team you will be responsible for maintaining, fault-finding, and improving production machinery to ensure maximum uptime and efficiency while responding to breakdowns ensuring the smooth running and maintenance of the manufacturing equipment. Key Responsibilities of a Multi Skilled Maintenance Engineer Quality Checks of maintenance activities Carry out planned preventative maintenance Adhere to Health and Safety Standards at all times Demonstrate hands on ownership and confidence when responding to breakdowns Prioritise system faults Accurately record work carried out Collaborate with colleagues Ensure CMMS is correctly updated Experience and Qualifications required for an Multi Skilled Maintenance Engineer Minimum NVQ Level 3 Electrical/Mechanical Qualification, Time Served Apprenticeship Good understanding of Siemens / Allen Bradley Good understanding of SCADA control systems Strong fault finding and problem solving skills Strong communication skills Good manufacturing practices Salary and Benefits of a Multi Skilled Maintenance Engineer Annual Salary £59,306 23 Days Annual Leave Quarterly Performance Bonus between £325 - £750 (KPI dependant) Employer 10% Pension Contribution Staff Discount Cycle to work scheme Electric Car Scheme Overtime Gym Membership If you feel you are ready to take the next step in your career and have the right skills and experience for thisrole please click Apply or contact the Permanent Vacancies team on 07443 359151 TPBN1_UKTJ

Mobile Fleet Technician - Kent Day shifts – Up to £55,000- Paid door to door Are you ready to go on the road and take your technical skills to a dedicated network of customer sites? If so, then this could be the role for you? We are looking for a self motivated and independent HGV Vehicle Engineer who can travel to our clients various workshops in a designated area providing: Callouts Preventative Maintenance Emergency Breakdowns Pre-arranged servicing at rural sites MOT Preparation Engine work and diagnostic investigations Correction of running defects Chassis and fabrication work Hydraulics and pneumatics Improvement of vehicle standards Electrical and wiring inspections and corrections You will be travelling within a designated area and have use of a fully equipped van. We require an excellent understanding of vehicle technology, and be capable of following the repair process from fault analysis to completion The personal qualities that my client are looking for are simple, these are the ethos of an exemplary team member that can represent the company in the best way possible; Reliable and punctual Enthusiastic, proactive and an innovative thinker Abiding by health and safety rules A problem solver with a can-do mindset In this role, no 2 days will ever be the same and the products that you work on will be diverse. HGV's, Gritters, Refuse Collection Vehicles, Tankers, Sweepers, Flat Beds and Cherry Pickers. Your industry is moving faster with every day that passes. Electric & Hydrogen Vehicles are now part of the present and you will be trained on the newest products and repair techniques when required. Class2 Licence would be beneficial. You will need to be a fully qualified Commercial Vehicle Technician or have been accredited via an authorised Apprenticeship. Benefits – you will start with 25 days annual holiday (plus bank holidays) per annum, you will also be enrolled in the pension scheme and qualify for the private healthcare scheme. If this role isn't for you but you are looking for a move, then please get in touch. Kautec Recruitment is a fast growing automotive people business that recruits the right way. HGV, heavy goods vehicle, commercial vehicle, RCV, refuse collection vehicle, tipper, sweeper, gritter, mechanic, vehicle engineer, vehicle technician, fitter, workshop. TPBN1_UKTJ

Key Responsibilities Perform scheduled preventative maintenance on production equipment, including block moulders, pre-expanders, hotwire cutters, conveyors, compressors, and hydraulic systems. Carry out reactive maintenance promptly to minimize downtime and ensure continuous production. Conduct regular facility inspections, including but not limited to cooling tower, boiler, compressed air systems, and general plant infrastructure. Troubleshoot electrical, mechanical, hydraulic, and pneumatic systems and equipment. Maintain accurate records of maintenance activities using the sites maintenance management system. Identify and report potential equipment failures or safety issues, recommending corrective actions where necessary. Assist with machine upgrades, installations, and modifications as required. Ensure all work is carried out in compliance with site safety policies, procedures, and relevant legislation. Support continuous improvement initiatives across the plant. Qualifications Time-served apprenticeship in a relevant engineering discipline (mechanical, electrical, or multi-skilled). Minimum of 3 years experience in a maintenance role within a manufacturing or industrial environment, preferably in plastics, foam, or a similar process industry. Strong understanding of mechanical systems, with experience in electrical fault-finding and basic repairs. Familiarity with boiler systems, cooling towers, and industrial utilities is highly desirable. Ability to read technical drawings, schematics, and manuals Capable of working independently or as part of a team, with a proactive and problem-solving approach Personal Characteristics Effective team worker, equally able to work on their own Forward thinking: excellent planning skills with the ability to anticipate potential obstacles Highly self-motivated/self-starter/resilient Strong communication skills (written and oral) Diligent with excellent attention to detail Excellent Time Management and organisational skills. Systematic and with attention to detail. A flexible approach to work. Health & Safety Follow all safety procedures in full, ensuring safety is a number one priority Support Zero LTA or accidents within the plant Always wear the correct PPE for the work you are carrying out Record any near misses. Use the correct tools and techniques you need to be able to perform tasks safely, including lifting etc. Assist the plant engineer in ensuring all equipment on site is safe and all relevant repair work and checks have been completed. Ensure all people working within and around the machines zones are following all the Health & Safety rules including wearing PPE etc. Shifts 3 Rotating shift pattern, 6am - 2pm / 10pm - 6am / 2pm - 10pm - night shift starts Sunday night. Company Benefits: Competitive Salary 25 Days Holiday plus Bank Holidays Company Pension Life Assurance Income Protection Holiday Purchase Scheme Birthday Holiday Long Service Awards Volunteering Day Enhanced Maternity pay Free Parking Company Uniform Employee Welfare Support Line Occupational Healthcare Provision TPBN1_UKTJ

JOB OVERVIEW Our client are seeking a highly skilled and motivated Static Maintenance Electrician to carry out maintenance works at a static site in Livingston. Maintenance / repairs / replacements of lighting / rewires /electrical testing and all general electrical duties and including all other duties including mechanical on site. We are looking for a candidate who has knowledge of electrical systems and over 5 years experience in similar Electrical/ HVAC/ Maintenance Engineer type role. This post will be based on a static role, covering our clients site in Livingston. There is no vehicle with this role and candidate will be required to make their own way to site. COMPANY USP Comprehensive M&E Maintenance Coverage Our client provides a full spectrum of building services maintenance, including critical, non-critical, and preventative solutions. Their services encompass mechanical, electrical, plumbing, HVAC, water hygiene, and fire safety systems, ensuring optimal building performance throughout their lifecycle 24/7 Nationwide Availability With strategic offices and service centres across the UK, our client offers round-the-clock support 365 days a year. This nationwide presence ensures rapid response times and consistent service delivery, regardless of location Tailored Solutions for Diverse Sectors Our client specializes in providing customized facilities management solutions across various sectors, including commercial, industrial, retail, and public services. Their expertise allows them to address the unique challenges and requirements of each sector effectively JOB RESPONSBILITIES This role operates on a 4 on 4 off shift rota, working 10-hour shifts (8am6pm). There is another Electrician on site, and the rota will be shared between them. Day-to-day duties will include attending reactive calls raised from the control room, carrying out planned preventive maintenance (PPM) tasks such as emergency lighting tests, distribution board checks, Air Handling Units (AHUs), supply and extract fans, as well as completing weekly tests including fire alarm call points, sprinkler alarms, generator tests, flushing, and other routine checks. The candidate will also be required to liaise with and support subcontractors, assist mobile support engineers, and report directly to the onsite Operations Manager. We are looking for a candidate with a strong knowledge of electrical systems and over 5 years experience in a similar Electrical / HVAC / Maintenance Engineer type role. SKILLS & QUALIFICATIONS Approved Electrical Apprenticeship Minimum requirement. 18th Edition Accreditation Essential. 2391 Testing & Inspection Beneficial. SALARY & BENEFITS £39,000 Overtime available No Call out Rota 21 Days Holiday + Bank Holiday Company vehicle and fuel card. Pension scheme. Health and wellness benefits. Ongoing training and professional development opportunities. Opportunities for career growth within the organization. Please call Martin on 07467 346417 for more information and please apply to this advert to prompt a call back. TPBN1_UKTJ

Position: Multiskilled Maintenance Engineer Location: Ely Salary: £40,000-£50,000 Multiskilled Maintenance Engineer required for a corrugated packaging manufacturer based in Ely. The candidate will need be electrical and mechanically skilled and live within a commutable distance. The successful candidate will be expected to have: Experience in corrugated packaging, paper, FMCG, or high-speed production environments preferred Strong fault-finding and repair skills across: Electrical systems (3-phase motors, inverters, sensors, control panels) Mechanical systems (bearings, chains, belts, gearboxes, pneumatics, hydraulics) Working knowledge of PLC systems (e.g. Siemens, Allen-Bradley) for fault diagnosis Experience maintaining corrugators, die cutters, folder gluers, printers, stackers, or conveyors advantageous Competent with planned preventative maintenance (PPM) and breakdown response Multiskilled Maintenance Engineer Requirements Time-served apprenticeship in Electrical, Mechanical, or Mechatronic Engineering Relevant engineering qualification (NVQ Level 3 / City & Guilds / BTEC or equivalent) Electrical certification (e.g. 18th Edition or equivalent) desirable Ability to read and interpret electrical schematics, mechanical drawings, and PLC diagrams Multiskilled Maintenance Engineer Salary & Benefits Salary - £40,000-£50,000 Double Days, Rotating Shift Pattern Week 1. Monday to Thursday 06.00am - 2.00pm, Friday 05.00am - 12.00 Week 2. Monday to Thursday 2.00pm - 10.00pm, Friday 12.00 - 7.00pm Candidates work a total of 39 hours a week 40 hours paid 2 x 15-minute breaks per shift. Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for. TPBN1_UKTJ

Multi-Skilled Maintenance Engineer Location: Hull Salary: £55,000 Hours: Monday - Thursday 11.00pm - 7.00am / Friday - 6.00pm - 11.30pm Contract: Full-time, permanent The Opportunity Our client, a leading manufacturing and packaging facility operating across multiple sites in Hull, is seeking a Multi-Skilled Maintenance Technician to join their established engineering team. You'll work across a mix of modern and ageing equipment, using your electrical and mechanical expertise to keep high-speed automated production lines running safely, efficiently, and with minimal downtime. This role suits a proactive, hands-on engineer capable of working to high standards without close supervision. Key Responsibilities Provide effective breakdown response, repairs and maintenance across machinery, equipment, services and site facilities. Carry out electrical and mechanical fault-finding, diagnostics, and repairs to minimise downtime and improve OEE. Complete planned preventive maintenance (PPM) and create new PPM schedules where needed. Install, commission and support new machinery and equipment. Read, interpret, and update electrical and mechanical engineering drawings. Liaise with the Maintenance Supervisor to prioritise tasks aligned with production demands. Log all work using the site system (Shire) and ensure accurate documentation. Maintain excellent housekeeping standards and support 6S, TPM, and continuous improvement initiatives. Advise production during breakdowns using strong decision-making and root-cause analysis skills. Support external contractors and engage with suppliers when required. Skills & Experience Required Essential: Completed apprenticeship or equivalent engineering qualification. NVQ Level 3 in Electrical or Mechanical Engineering (or equivalent). 16th/17th/18th Edition Wiring Regulations (City & Guilds 2382). Proven multi-skilled engineering experience within a fast-moving manufacturing environment. Ability to read and update electrical and mechanical schematics. Strong electrical fault-finding & diagnostic competence. Experience with PPM, reactive maintenance, and plant repairs. Good communication and ability to work effectively under pressure. Desirable: PLC knowledge: Siemens / Allen Bradley (fault finding/interrogation). Experience working with TPM, OEE improvement and CI activities. HMI/PLC understanding, basic programming adjustments (Desireable) If interested Just apply or for a confidental chat feel free to email me on 01455 242 070 TPBN1_UKTJ

Electrical Maintenance Engineer Location: Chesterfield Salary: £42,000+ DOE Reporting to: Technical & Maintenance Manager Shifts: Days, Full time May involve out of hours work, weekends, or on-call duties. Generations People is recruiting for an exciting opportunity, for an Electrical Maintenance Engineer to join a manufacturing company, an established, and stable engineering team based in Chesterfield. Purpose of Electrical Maintenance Engineering is to carry out electrical maintenance, installation, and repair work on plant machinery, equipment, and facilities to ensure maximum operational uptime and compliance with health and safety regulations. Responsibilities for the Electrical Maintenance Engineer role: Diagnose and repair electrical faults in machinery and equipment. Perform preventative and reactive maintenance on electrical systems including motors, control panels, PLCs, conveyors, and lighting systems. Supervising and carrying out planned maintenance routines (PPM) as per schedule, including PAT Testing. Read and interpret technical drawings, electrical schematics, and manuals. Ensure all electrical work complies with relevant regulations and company safety standards. Assist in the installation and commissioning of new equipment. Liaise with other maintenance staff, production teams, and contractors. Supervise Contractors when on site. Maintain accurate records of maintenance activities and parts used. Respond promptly to equipment breakdowns to minimize downtime. Contribute to continuous improvement initiatives and energy efficiency projects. Ensure all duties are carried out safely within the company Health & Safety requirements. Work in industrial environments, including noisy or confined spaces Use of PPE is mandatory. Qualifications & Experience: NVQ Level 3 in Requirements for Electrical Installations; Inspection & Testing Electrical Equipment Strong understanding of City & Guilds 18th Edition Wiring Regulations (BS 7671). Time-served apprenticeship in electrical engineering (desirable). PLC fault finding and basic programming knowledge (advantageous). PAT Testing certification. Skills Required: Proven experience in a similar maintenance electrician role within an engineering or manufacturing environment. General Maintenance work. Strong fault-finding and problem-solving skills. Ability to work independently and as part of a team. Good understanding of health and safety standards and safe working practices. Ability to work under pressure and manage time effectively. Multi-skilled (mechanical skills advantageous). Flexible and adaptable to changing priorities. Strong communication and teamwork skills. Self-motivated with a proactive approach. Ability to manage time / workload. Good communication skills, and able to coach and mentor where required. Keen eye for quality and detail Good problem-solving skills. Can-do positive attitude and energy Good team member and contribute in a positive way to the development of the team and business TPBN1_UKTJ

WELCOME TO LINAKER For over 30 years, Linaker has built a reputation for delivering dependable, high-quality mechanical engineering services across a wide range of client environments. Our strength lies in keeping critical systems operationalsupporting organisations with technical precision, responsive maintenance, and long-term reliability. Founded on trust, care, and reliability, were more than a service providerwere a fully embedded partner in our clients operations. ABOUT THE ROLE We are looking for a reliable and experienced Multi-Skilled Mobile Engineer with both Commercial Gas and Electrical experience to support our growing maintenance portfolio across commercial and retail environments. The successful candidate will deliver both planned preventative maintenance (PPM) and reactive maintenance across a range of building services including gas, electrical and associated mechanical plant. The role requires a technically competent engineer who is comfortable carrying out fault finding, testing, servicing and repair of building systems, while ensuring all work is completed safely, compliantly and to a high standard. You will work across multiple sites providing a professional service while maintaining strong communication with the client, helpdesk and account management teams, ensuring contractual obligations, SLAs and KPIs are achieved. This role requires a proactive engineer who can operate independently, produce quotations for remedial works and maintain accurate records using the CAFM system. WHAT YOU WILL BE RESPONSIBLE FOR WITHIN YOUR SPECIFIED AREA Planned Preventative Maintenance Completion of PPM tasks in line with contract schedules and SFG20 standards Servicing and maintenance of commercial gas appliances, electrical systems and associated plant Ensuring all maintenance activities are delivered efficiently and proactively Maintaining accurate site logbooks and asset records Reactive Maintenance & Repairs Diagnose faults across gas, electrical and building services systems Carry out effective repairs to minimise downtime Ensure breakdowns are diagnosed quickly and resolved safely Electrical Works Electrical testing, inspection and fault finding General electrical maintenance and small installation works Ensuring compliance with BS7671 wiring regulations Completion of certification and documentation where required Gas Maintenance Servicing and maintenance of commercial gas appliances and heating systems Combustion performance analysis and safe operation checks Compliance with Gas Safe regulations and current legislation Quotations & Commercial Awareness Production of accurate quotations including: Correct parts identification Labour estimates Clear scope of works Deliver works profitably while maintaining quality and customer satisfaction Compliance & Health and Safety Work in accordance with all health, safety, environmental and compliance requirements Ensure all gas and electrical works meet statutory regulations and company policies Maintain safe systems of work at all times Communication & Client Liaison Maintain strong communication with: Clients Helpdesk teams Engineering and Account Managers Represent Linaker professionally on site Build strong relationships with stakeholders Documentation & Reporting Record and document all works via the CAFM system Maintain site logbooks and service documentation Provide clear reports on faults, repairs and follow-up actions Asset & Equipment Care Ensure tools, calibration equipment and company assets are maintained correctly Maintain van stock levels and ensure essential parts are available Report damage or defects to equipment promptly General Duties Ensure contractual SLAs and KPIs are achieved Promote high standards through personal conduct and workmanship Participate in the out-of-hours call rota Carry out any other reasonable duties required to support the business WHAT WE ARE LOOKING FOR Essential Qualifications Gas Qualifications COCN1 Core Commercial Gas Safety CCN1 Core Domestic Natural Gas Safety CODNCO1 Changeover Domestic to Non-Domestic Core CIGA1 Indirect Gas-Fired Heating Appliances CDGA1 Direct Gas-Fired Heating Appliances CPA1 Combustion Performance Analysis ICPN1 Gas Pipework Installation TPCP1 / TPCP1A Testing & Purging Electrical Qualifications NVQ Level 3 Electrical Installation or equivalent City & Guilds Electrical Apprenticeship or equivalent 18th Edition Wiring Regulations (BS7671) Experience 35 years experience within commercial building services or FM maintenance Strong diagnostic and fault-finding capability Experience working within a mobile facilities maintenance environment Desirable Qualifications City & Guilds 2391 Testing & Inspection ECS Gold Card CKR1 Gas Cooking Appliances CORT1 Radiant Tube Heaters CCCN1 Catering Appliances Legionella Awareness Asbestos Awareness IPAF PASMA Thermography qualification Portable Appliance Testing qualification IOSH Working Safely First Aid at Work Electrical qualifications in EV charging, solar PV or battery storage THE PACKAGE 25 Days annual leave plus bank holidays. Buy and sell holiday to suit your schedule. One paid volunteering day per year, empowering you to support causes that matter to you. Company Van for site travel. Access to our Employee assistant programme for wellbeing support. Auto enrolment in the company pension scheme. Full training by a supportive friendly team. Annual events. INTERESTED This is a fantastic opportunity to lead and develop a team of engineers in a business thats growing fast and investing in talent. If youre ready to step into a pivotal role, influence outcomes, and build something meaningful, wed love to hear from you. If you think youre a match, get in touch today EQUAL OPPORTUNITIES Linaker Limited is an equal opportunities employer committed to diversity and inclusion. We welcome applications from all suitably qualified persons regardless of their race, sex, disability, religion/belief, sexual orientation, or age. TPBN1_UKTJ

Role: Multi-Skilled Maintenance Engineer Salary: £40,000 to £42,000 per annum, plus benefits and further up-skilling & training opportunities to excel as an engineer Shifts: 4 on 4 off 12-hour Shifts, rotation of days and nights Location: Torquay Area. Commutable from Exeter, Plymouth, Totnes, Okehampton, Moretonhampstead, Dartmouth, Farringdon, Exmouth and surrounding areas Company We are seeking a Multi-Skilled Maintenance Engineer (Either Bias) to work within a fast-paced production environment where much of the machinery is large and often automated. You will benefit from working as part of a friendly team of Maintenance Engineers working across planned preventative maintenance and responding to Electrical and Mechanical breakdowns. Working within this company you will have opportunities to progress your knowledge & career through up-skilling and for those that are interested, gaining further qualifications. As a multi-skilled Maintenance Engineer within this production environment, both electrical & mechanical bias candidates are equally of interest. Responsibilities The Multi-Skilled Maintenance Engineer will be covering both electrical & mechanical maintenance work across the factory, providing a fast response to any breakdowns and undertaking Planned Preventative Maintenance. Requirements Experience working as a Maintenance Engineer within a production or manufacturing environment is ideal, however for those with a great attitude to learning, the manager would also consider those with a Maintenance or Servicing background in any environment including motor vehicles, Armed Forces (RAF, ARMY, NAVY), industrial, manufacturing, production or automation. You will need to have completed a recognised engineering apprenticeship or hold engineering qualification at NVQ/C&G Level 3 or above. Knowledge or experience of some of the following: motors, belts, bearings, chains, gears, pumps, boilers, sensors, inverters, relays, contactors, 3 phase, PLCs, pneumatics, hydraulics etc. Good fault-finding skills Friendly and adaptable working attitude Proactive approach to work and keen to get your hands dirty The ability to work effectively as part of the Maintenance team. If this role sounds of interest, please apply now and send your most up to date CV to Wesley at TechNichols Resourcing to be considered. Or call TechNichols Resourcing and speak with Wesley for further information. We will endeavour to get back to all applicants but if you have not heard back within 5 working days unfortunately your application has been unsuccessful. TPBN1_UKTJ

Are you an experienced Electrical Engineer or Multi Skilled Engineer looking for a career change into engineering training or apprenticeship assessment? This is an excellent opportunity for an Electrical Engineer or Multi Skilled Engineer to transition into a rewarding career as an Engineering Assessor , supporting apprentices working towards nationally recognised engineering apprenticeship standards. We are recruiting on behalf of a well-established engineering training provider in the Humber region that delivers high-quality apprenticeships and engineering training to hundreds of employers across manufacturing, engineering and industrial sectors. Due to continued growth, they are now looking to appoint 1 x Electrical / Multi Skilled Engineering Assessor to support apprentices across the region. This role is ideal for engineers looking to step away from shift work or site-based roles and move into a position where they can pass on their industry knowledge while helping to develop the next generation of engineers. The Role As a Field Team Assessor , you will visit apprentices within their workplace to assess their progress against apprenticeship standards and support their technical development. You will work closely with learners and employers across the Humber region, helping apprentices build the knowledge, skills and behaviours required for successful careers in engineering. Key Responsibilities Visiting apprentices within their workplace across the Humber region Assessing learner progress against apprenticeship standards Supporting apprentices through mentoring and technical guidance Working with employers to ensure training objectives are met Maintaining accurate assessment records and learner progress reports What We Are Looking For Background as an Electrical Engineer or Multi Skilled Engineer Relevant engineering trade qualifications Strong communication and interpersonal skills A genuine interest in supporting the development of apprentices Ability to manage a regional caseload independently Essential Requirements Full UK driving licence and access to your own vehicle The successful candidate will need to travel between training centres and company sites across the Humber region, therefore public transport is not a practical option . Desirable (Training Can Be Provided) Level 3 Assessor qualification (TAQA, A1, CAVA or equivalent) IQA Level 4 qualification Candidates without assessor qualifications are welcome to apply. Full support will be provided to gain the required qualifications. Benefits include: 42 days annual leave (including bank holidays) Annual bonus based on organisational performance Pension scheme: 5% employee contribution / 7% employer contribution Life insurance (4 x annual salary) Private healthcare (after a 3-month qualifying period) Safeguarding The organisation is committed to safeguarding its learners. Successful applicants will be required to complete a Disclosure and Barring Service (DBS) check and undertake an appropriate instructor or teaching development programme. TPBN1_UKTJ

Electrical Technician – Grangemouth Location: Grangemouth, Scotland Salary: £40,000 – £43,600 (depending on experience) Hours: Monday to Friday 8am - 4pm This role will focus on carrying out electrical maintenance, inspection, testing and repair activities across operational facilities and pipeline infrastructure, ensuring systems remain safe, compliant and operating efficiently. The Role As an Electrical Technician, you will play a key role in maintaining electrical infrastructure and responding to operational maintenance requirements. Working closely with maintenance engineers, operational teams and contractors, you will ensure equipment reliability and compliance with industry and regulatory standards. Key Responsibilities Carry out electrical maintenance, inspection and testing in line with maintenance schedules and site procedures. Perform electrical isolations in accordance with approved procedures. Diagnose faults and respond to breakdowns on electrical equipment. Overhaul electrical equipment using OEM manuals and technical drawings. Conduct inspections in line with BS60079 and BS7671 requirements. Carry out electrical repairs across operational equipment, buildings and site facilities. Perform recalibration of instrumentation including pressure, level and flow measurement systems. Support maintenance and troubleshooting of tank gauging systems, SCADA and alarm systems. Maintain accurate maintenance records and work orders within the CMMS system. Assist with stock management and spare parts availability. Oversee electrical contractors and ensure work is completed safely and in line with permit systems. Review and work to risk assessments and method statements, raising permit-to-work documentation where required. Interpret and work from technical documentation including P&IDs, electrical loop drawings, panel drawings and process flow diagrams. Support training and development of apprentices and junior technicians. Assist with developing procedures and quality assurance documentation. Liaise with suppliers and contractors to support procurement of electrical equipment and services. About You: Completed time-served electrical apprenticeship CompEx certification 2394/2395 Inspection & Testing BS7671 / 17th Edition (or later) Experience working within hazardous or industrial environments Ability to read and interpret engineering drawings and electrical schematics Experience working under permit to work systems Strong communication skills and ability to work both independently and within a team Good IT skills and experience using maintenance management systems (CMMS) Full UK driving licence If you are an experienced Electrical Technician looking to join a professional maintenance team within a safety-critical industry, Outsource UK would like to hear from you. Inclusion Statement: Outsource UK is committed to creating a diverse and inclusive environment and is proud to be an equal opportunity employer. You'll receive fair consideration for your application regardless of your race, religion or belief, gender, gender identity or expression, sex, sexual orientation, disability, marriage and civil partnership, pregnancy and maternity, or age. We're proud Corporate Members of the Hidden Disabilities Sunflower. If you need any adjustments at any stage - from application to interview or in your new role - please let us know. We're here to support you every step of the way. We believe diversity of thought and background makes us stronger, and we welcome applications from people of all backgrounds and life experiences. TPBN1_UKTJ

Principal Electrical Engineer - EC & I Are you ready to take the lead on some of the most challenging and rewarding engineering projects in the nuclear sector? I am looking for a Lead Electrical Engineer / EC&I Engineer to champion the delivery of complex machine design and build projects, guiding them from concept through to manufacture, testing and successful client handover. In this pivotal role, you'll head up multi-disciplinary teams, manage the electrical engineering scope of major projects, and ensure designs meet the highest standards of safety, compliance and innovation. Working closely with internal engineering specialists, project teams, and a network of trusted subcontractors, you'll play a major part in delivering solutions that matter. Benefits: Salary £55-70k depending on experience Hybrid and flexible working Private Healthcare Pension The Role Leading the electrical and EC&I elements of major engineering projects. Ensuring outsourced EC&I work meets specification Collaborating with design engineers to develop solutions that integrate seamlessly Reviewing drawings, documentation and design outputs from subcontractors and internal teams. Supporting factory acceptance testing and contributing to project sign-off. Building strong relationships with clients, suppliers and subcontractors Providing technical input for tenders. Supporting the development of future engineering talent through internship and apprenticeship programmes. You: Strong electrical engineering background with experience delivering multi-discipline engineering projects. Confidence leading technical scope and reviewing electrical/EC&I designs. A collaborative mindset and excellent communication skills. Ability to thrive in a regulated, fast-paced engineering environment. Willingness to travel within the UK and overseas when required. WR Engineering are the #1 recruitment partner for engineering, manufacturing & technical sales jobs. We recruit for permanent jobs UK wide. WR is acting as an Employment Agency in relation to this vacancy. TPBN1_UKTJ

Building Services Assistant About the Role The HireWorks Ltd is proud to be representing a well-established organisation seeking a Building Services Technician to join their friendly and supportive Building Services team in Cambridge. This is a varied, hands-on role offering stability, development opportunities, and a balanced working environment ideal for someone looking for a long-term position without the high-pressure demands often associated with intensive trade roles. If you have electrical maintenance experience and are looking for a role where your skills will be valued in a collaborative setting, this could be the perfect opportunity. Key Responsibilities Youll be involved in a wide range of duties across electrical maintenance, compliance, and general facilities support: Electrical Tasks Light testing and basic electrical works Fault finding and minor repairs Basic rewiring Compliance & Safety Conduct safety and compliance checks Fire safety testing including fire doors and alarm systems Facilities Maintenance General repairs and minor alterations Painting and decorative works Plant and equipment maintenance Laboratory & Specialist Support Assisting in laboratory and specialist facilities environments About You Were looking for someone who is: Experienced in electrical maintenance (Level 2 or 3 in Electro-technical Technology Installation or similar qualification preferred) Comfortable carrying out basic electrical works and safety checks Experienced in facilities-related tasks, or keen to develop in this area Able to work independently and as part of a team Flexible, organised, and a strong communicator Comfortable with hands-on work and minor building alterations This role would particularly suit someone later in their career or someone seeking a more relaxed, stable working environment while still remaining technically engaged. Salary & Benefits Grade 5: £32,000 £36,498 (with progression available) Grade 6 (potential uplift): £34,000 £39,000 Incremental salary increases based on business case submissions Apprenticeship and structured development pathways Long-term job stability Supportive team environment Clear opportunities for progression Why Apply? Varied and interesting workload Strong learning opportunities in facilities, plant, and lab environments Career development within an established team Stable, long-term position in Cambridge We endeavour to respond to every candidate. However, if you have not heard from us within 10 days, please assume your application has been unsuccessful or the position has been filled. TPBN1_UKTJ

?? Engineering Supervisor ?? Merthyr Tydfil, South Wales ?? £45,000 - £55,000 + excellent benefits Yolk Recruitment is partnering with a forward-thinking manufacturer in Merthyr Tydfil to recruit an Engineering Supervisor who will oversee engineering operations and boost plant performance in a state-of-the-art facility. This vital leadership position blends technical expertise with team management, project delivery, and ongoing enhancements. Mon-Fri, 40hrs per week. The facility prioritises major upgrades in machinery, infrastructure, and staff development, viewing engineering as central to success. You'll collaborate with a dynamic management group that encourages fresh approaches, relies on analytics, and pursues top-tier production standards. What You'll Do You'll guide the engineering team to ensure smooth, secure, and high-performing site operations. Your core activities include: Directing and motivating the engineering staff, scheduling tasks, and aligning efforts with site goals for equipment, buildings, and initiatives. Leading health and safety efforts across engineering zones, promoting robust protocols to protect all personnel. Championing organisation and cleanliness initiatives in engineering spaces, fostering a disciplined work environment. Maintaining current procedures, hazard evaluations, and team capability records to support compliance and readiness. Tracking key performance metrics for engineering, leveraging insights to elevate results through targeted guidance. Overseeing external service providers, verifying safety documentation, and conducting orientation sessions. Collaborating across departments to sequence tasks, cut interruptions, and implement operational upgrades. Guaranteeing timely completion of mandatory equipment checks with full records. Monitoring capital investments and departmental finances to optimise spending and gains. Maintaining site infrastructure and support systems. Integrating scheduled upkeep, urgent fixes, and forward-looking strategies to evolve maintenance practices. Spearheading enhancement initiatives within timelines and budgets, involving production colleagues and proven methods. Advancing reliability programs and daily upkeep across production areas. Controlling spare parts inventory to meet demands while adhering to financial plans. What You'll Bring Completed apprenticeship plus HNC-level (or similar) qualification in Mechanical or Electrical Engineering. 5+ years in engineering upkeep, processes, or projects, including 2-3 years leading teams or operations. Solid grasp of mechanical/electrical setups, control systems, and relevant standards. Background in planned and advanced maintenance techniques, informed by performance data. Skilled at analysing technical drawings for electrical, mechanical, hydraulic, and pneumatic systems. Proficient in IT tools like MS Office, with ease handling metrics and financial oversight. Supportive leadership approach that develops talent and forges site-wide partnerships. Results-oriented attitude, spotting opportunities, crafting fixes, and driving execution. Excellent interpersonal abilities for pitching concepts, persuading stakeholders, and covering for senior roles. Why You Should Apply Influential position shaping engineering direction and overall site results. Chance to build a proactive, reliability-focused engineering approach in an expanding firm. Commitment to technology and talent growth, offering clear paths for advancement. Team up with an open-minded operations group that values your input. Thrive at a respected, innovative South Wales operation supported by international resources. Ready to Apply? If you are an experienced Engineering Supervisor looking for a well-paid, secure shift role with great benefits and a strong pension, this could be an ideal next move. Contact Andy Jones to find out more. Please apply with a CV and a cover letter outlining why you're perfect for the role. Know someone great for the job? We offer a referral scheme-just get in touch! Note: We do our best to respond to every application, but due to volume, we can't always guarantee it. If you haven't heard back within 7 days, unfortunately, you haven't been successful this time. Keep an eye on our site for new opportunities! TPBN1_UKTJ

JOB TITLE: Field Service Engineer INDUSTRY: Factory Automation - Injection Moulding SALARY: £40k + company vehicle, bonus, overtime and other additional benefits LOCATION: UK and Ireland (Field based) This is a fantastic opportunity to develop your career with a global technology leader, working directly with customers across the UK and Ireland. What You’ll Do • Install, service, repair and carry out preventative maintenance on Roboshot products., • Provide on‑site support to customers across the UK & Ireland (with overnight stays)., • Produce high‑quality service reports and customer documentation after each visit., • Deliver exceptional customer satisfaction through strong technical skills and a professional approach., • Work safely and comply with company and customer Health & Safety policies., • Be flexible with working hours to meet customer needs. Desired Qualifications & Attributes • Proven experience working with injection moulding machinery., • Completed engineering apprenticeship, with relevant qualifications., • Post‑qualification practical experience in an engineering environment., • Strong understanding of mechanical, electrical, hydraulic and pneumatic systems., • Experience in a field service role is beneficial (but not essential)., • Excellent fault‑finding, analytical and problem‑solving abilities., • Confident communicator with strong listening skills., • IT literate., • Positive “can‑do” attitude and commitment to high‑quality work., • Full, UK driving licence.

Technical Incoming Inspector ?? Location: Belfast An exciting opportunity has arisen for a Technical Incoming Inspector to join the Supply Chain Operations team Responsibilities I nspection, quality control, and quality assurance Compliance with design specifications and quality standards . T echnical guidance to operators Monitor the Delegated Operator Scheme . Produce technical reports highlighting drawing, process, or tooling anomalies. Skills & Experience Electrical/mechanical apprenticeship . Min 2 years' post-apprenticeship experience in aerospace, manufacturing, assembly, or tooling. Ability to interpret engineering drawings/specifications . Knowledge of quality control & manufacturing standards . ONC, A-levels 3D metrology knowledge TPBN1_UKTJ

Junior Overhead Line Operative (Training) Middlesborough £40,000 to £50,000 (£55K+ OTE) + Training + Overtime + Structured Progression + Bonus Schemed + Company Pension + Flextime + Company Van + Company Benefits Are you a Junior Overhead Line Operative with a background in Low Voltage or High Voltage looking to join a company that does end-to-end solutions for High Voltage and Low Voltage Electrical Networks for range of commercial and industrial applications, offering great company benefits such as training and structured professional development plans? Do you want to join a company that offers end-to-end High Voltage and Low Voltage full-turn-key solutions for the commercial and industrial sectors, such as Tesla, offering great employee benefits such as paid overtime, flexitime, structured professional development plans and more company benefits? On Offer is opportunity for a Junior Overhead Operative to join a company that heavily invests in their employees putting you through lots of internal and external training with career pathways into supervisory or management positions as well as great employee benefits such as company vehicle, paid overtime and company pension. In this role, as a Junior Overhead Line Operative, you will carry out construction, refurbishment and maintenance work for both low voltage and high voltage in line with company productivity expectations across the Northeast. This includes wood and steel pole replacements, open wire, ABC re-stringing and shrouding works. This Role would suit a Junior Overhead Lines Operative or similar, with DNO authorizations for A-series, O-series and W-series, with the relevant qualifications or apprenticeship to work with Powerlines. The Role: LV and HV Overhead Line works Construction, refurbishment and maintenance work at both LV and HV Field Service The Person: Junior Overhead Lines Operative High Voltage and or Low Voltage Experience and relevant qualifications UK Driving License REF: BBBH24291JHA Keywords: Junior, Overhead Lines Operative, Low Voltage, High Voltage, Construction, Overtime, Training, Progression, Middlesborough, Teeside, Stockton-on-Tees If you're interested in this role, click 'apply now ' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

Position: Bench Fitter Location: Killamarsh, Sheffield Hourly rate: 16.93 per hour (£34,334 per annum) Assembly Operative required for a well-established specialist supplier of hydraulic and Electric Submersible Pumps. The successful Candidate will be undertaking assembly, disassembly and repair works on Diesel Pumps, Gearboxes and Diesel Engines. It is envisioned that the successful candidate will come from a background in Marine or Pump Fitting, have completed a Mechanical apprenticeship and be based within a commutable distance of Sheffield. Bench Fitter Position Overview Carrying out assembly of pump related components and sub-assemblies Conduct refurbishment works to existing machinery. Preparation and creation of parts lists for assembly. Carrying out functionality tests to check for mechanical or electrical faults in order to comply with strict quality standards. Preparation of completed equipment for client or factory testing. Adhering to Health & Safety and other regulations/standards-thus maintaining a safe working environment. Bench Fitter Position Requirements A HND / HNC / Apprenticeship Served qualification in mechanical engineering would be advantageous. Previous experience with assembly / disassembly and repair of pumps / engines or motors is essential. Ability to read and work from engineering drawings. Able to use small hand tools and manual machinery. A close attention to detail and initiative. Previous experience working to strict quality standards within manufacturing such as ISO: 9001. Based in a commutable distance of Sheffield. Bench Fitter Position Remuneration £16.93 per hour Monday - Thursday 8:00 - 16:30, Friday 8:00 - 15:30 39-hour week 33 Days Holiday Including Bank Holidays Pension Scheme Bennett & Game Recruitment are acting as a Recruitment Agency in relation to this vacancy. Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for. TPBN1_UKTJ

Field Service Engineer Location: West Central London Salary: £50K per annum + Van Included Hours: Monday–Friday 7:30am–4:30pm Contract: Permanent after 3 months This leading engineering company is entering an exciting phase of rapid growth, following the successful completion of several major projects across multiple industries. Building on its reputation for technical excellence and innovative solutions, the company continues to secure a wide range of new and challenging contracts. As part of this ongoing expansion, they are now looking to strengthen their team with the addition of a talented Field Service Engineer. This is a fantastic opportunity to join a forward-thinking organisation that values expertise, collaboration, and continuous improvement. You'll be part of a supportive and skilled team, working on diverse projects that make a real impact. Key Responsibilities Mechanical Responsibilities of the Field Service Engineer: • Diagnose and troubleshoot mechanical faults in pumps and associated systems., • Install, replace, and commission mechanical components such as pumps, bearings, seals, couplings, and valves., • Assess pumping systems for efficiency improvements or necessary upgrades., • Perform mechanical alignment, balancing, and fitting of pump systems., • Work safely in high-pressure and reactive maintenance environments., • Inspect, test, and maintain electrical components of pumps, including motors, starters, variable-speed drives, and control panels., • Carry out electrical fault diagnosis, repair, and replacement on-site., • Wire and connect pumps to power supplies, ensuring compliance with electrical regulations., • Liaise directly with clients to understand problems and provide on-site solutions., • Keep accurate records of work completed, parts used, and system performance., • Maintain tools, vehicles, and equipment in good working order., • Proven experience in the service of mechanical and electrical components in pumps., • Strong fault diagnosis and problem-solving skills., • Ability to work independently and as part of a team under pressure., • Knowledge of building services systems: heating, chilled water, air conditioning, and pressure boosting., • Experience in reactive maintenance and emergency call-outs., • Opportunities for ongoing training and professional development. ATA Recruitment specialise in the recruitment of Engineers across the UK, so if this role is not for you, please do have a look on our website for further potential opportunities which may suit your skills and experience better - If you have the skill, we have the recruitment knowledge and together we can find you your perfect job! - You must be eligible to live and work within the UK. Sponsorship is not provided. ATA is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation JBRP1_UKTJ

The position involves maintenance, fault finding, and repair of cooling and temperature control systems across a portfolio of critical and high-profile sites. These include large data centres, nationally important infrastructure, corporate headquarters, and occasional retail environments. The role offers exposure to a wide range of plant and manufacturers, with particular focus on water chillers and associated systems. Service, maintenance, and reactive repair of refrigeration and air conditioning systems Working on chillers, CRAC units, AHUs, and associated pump systems Diagnosing electrical, mechanical, and control faults Supporting customers across all temperature control and conditioned air systems Producing detailed service reports Participating in a 1-in-6 on-call rota Occasional installation and project work Maintaining a professional approach in critical business environments Requirements Time-served apprenticeship in Refrigeration & Air Conditioning NVQ or City & Guilds qualification in Refrigeration (highly desirable) C&G 2079 (F-Gas) certification Experience working with chillers and related systems Hydrocarbon refrigerant experience (desirable) Strong fault-finding skills across mechanical and electrical systems Ability to work independently Professional and customer-focused approach Clear written and verbal communication skills Full UK Driving Licence TPBN1_UKTJ

Are you an experienced Electrical Engineer or Multi Skilled Engineer looking for a career change into engineering training or apprenticeship assessment? This is an excellent opportunity for an Electrical Engineer or Multi Skilled Engineer to transition into a rewarding career as an Engineering Assessor , supporting apprentices working towards nationally recognised engineering apprenticeship standards. We are recruiting on behalf of a well-established engineering training provider in the Humber region that delivers high-quality apprenticeships and engineering training to hundreds of employers across manufacturing, engineering and industrial sectors. Due to continued growth, they are now looking to appoint 1 x Electrical / Multi Skilled Engineering Assessor to support apprentices across the region. This role is ideal for engineers looking to step away from shift work or site-based roles and move into a position where they can pass on their industry knowledge while helping to develop the next generation of engineers. The Role As a Field Team Assessor , you will visit apprentices within their workplace to assess their progress against apprenticeship standards and support their technical development. You will work closely with learners and employers across the Humber region, helping apprentices build the knowledge, skills and behaviours required for successful careers in engineering. Key Responsibilities Visiting apprentices within their workplace across the Humber region Assessing learner progress against apprenticeship standards Supporting apprentices through mentoring and technical guidance Working with employers to ensure training objectives are met Maintaining accurate assessment records and learner progress reports What We Are Looking For Background as an Electrical Engineer or Multi Skilled Engineer Relevant engineering trade qualifications Strong communication and interpersonal skills A genuine interest in supporting the development of apprentices Ability to manage a regional caseload independently Essential Requirements Full UK driving licence and access to your own vehicle The successful candidate will need to travel between training centres and company sites across the Humber region, therefore public transport is not a practical option . Desirable (Training Can Be Provided) Level 3 Assessor qualification (TAQA, A1, CAVA or equivalent) IQA Level 4 qualification Candidates without assessor qualifications are welcome to apply. Full support will be provided to gain the required qualifications. Benefits include: 42 days annual leave (including bank holidays) Working hours: Monday Thursday: 08:00 16:15 & Friday: 08:00 16:00 Annual bonus based on organisational performance Pension scheme: 5% employee contribution / 7% employer contribution Life insurance (4 x annual salary) Private healthcare (after a 3-month qualifying period) Safeguarding The organisation is committed to safeguarding its learners. Successful applicants will be required to complete a Disclosure and Barring Service (DBS) check and undertake an appropriate instructor or teaching development programme. TPBN1_UKTJ

Junior Planned Service Engineer (OEM / Mechanical / Pneumatic) £32,100 package including Basic Salary + Bonus + Private Healthcare + Company Car + Outstanding OEM Training + Full Expense Package + Full Tooling & Equipment Supplied + Residential Training Course Bristol & M4 Corridor Are you HNC/HND qualified or a graduate in Mechanical/Electrical Engineering or similar, looking to start or take the next steps in your career with a leading, global engineering company known for developing the next generation of engineers? This is an exciting opportunity to join a well-established, world-leading manufacturer of advanced engineering, recognised globally for its innovation across industries such as automotive, aerospace and electronics. On offer is the chance to join a globally recognised organisation with a supportive and collaborative environment, where you will receive extensive training to become a hands-on engineer and technical specialist on highly advanced equipment. Training will take place through dedicated training facilities, structured development programmes and mentorship from experienced technical specialists. Are you looking to join your genuine passion for engineering with a long-term career within a global organisation that will help you develop skills on industry-leading machinery and technology? The role: Hands-on training to learn and develop Routine planned maintenance of machine tools and associated equipment. Opportunity for an engineer to move into a first-time service role The person: A suitable engineering qualification, such as an apprenticeship/ NVQ level 3 training or previous experience in the engineering sector Basic understanding of electrical/hydraulic, and mechanical systems Full UK driving license If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Reference Number: BBBH24266 Keywords: Field Service, Mechanical, Pneumatics, HND, HNC, Mechanical Engineering, OEM We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The remuneration offered will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

Are you passionate about precision, safety, and delivering excellence in electrical engineering? Were looking for a highly motivated Electrical Inspection & Test Engineer to take ownership of inspection, testing, and documentation across new projects and existing electrical installationsensuring the highest possible standards every time. This is a hands-on, high-impact role at the heart of production, where your expertise will directly influence quality, compliance, and performance. The Role As a key member of our client's production team, you will be responsible for inspecting, testing, fault-finding, and documenting electrical control panels and associated systems. Youll ensure all builds meet internal quality benchmarks and external compliance requirements, while supporting continuous improvement and operational excellence. Key Responsibilities Carry out quality inspections and electrical testing of control panels Perform pre-power and functional testing, including PLC I/O and VSDs (AC & DC drives) Conduct insulation and resistance testing of power distribution systems Verify components align with electrical design specifications Read and interpret mechanical and electrical technical drawings Accurately record test results, log failures, and identify & rectify faults Provide feedback on failures and escalate issues where required Ensure all work meets company and external quality standards Maintain calibration of all in-house test equipment Support panel build and wiring activities when testing demand allows Liaise cross-functionally to ensure project briefs and timelines are achieved Support VSD bench repairs for AC and DC drives Visit external sites when required Champion Safety, Quality, Cost, and Delivery across production Train colleagues in line with your competency level Adhere to all Quality, Health & Safety, and Environmental procedures What Were Looking For Apprenticeship / Degree in Electrical Engineering / Mechatronics Electrical/electronic relevant engineering qualification Previous experience in a similar role (minimum of 5 years panel wiring experience) Capable of using initiative and paying close attention to detail Excellent organisational and time management skills, capable of prioritising Detailed knowledge of systems integration incorporating variable speed drives, robotics, PLCs and SCADA/HMI technologies What's on offer Holidays 25 days (plus Bank Holidays) Pension scheme Life Insurance Employee assistance programme Flexible working Programme of personal development & training Free car parking and EV charge points on-site Social & wellbeing activity programme TPBN1_UKTJ

Maintenance Engineer Continentals - 2 days, 2 nights, 4 off Salary: £48,386 - £51,845 + Pension + Benefits Location: Heanor Reference: Jo6828/NH The Company An excellent opportunity has arisen with one of the UKs instantly recognisable manufacturers, who are an international employer specialising in the processor & production of plastic recycled products for the consumer and chemical industries using plastics. They are part of a wider group which has a reputation which is second to none in the chosen marketplace, which will support career development within this global giant. Key Skills Apprentice Trained Engineer in Electrical or Mechanical Engineering Experience of PLC systems & Automated machinery Understanding of PPM systems You will have served a minimum of a full apprenticeship in electrical or mechanical engineering and have experience working within the maintenance of electrical and mechanical machinery.On a day to day basis, you will work on a variety of production machinery including PLC systems, extruders, conveyors, wrappers, granulators and packing machinery.The ideal candidate will also have experience within a manufacturing site and the ability to work within a team or autonomously as required. Longer term opportunities are also available within this instantly recognisable group to progress your career. If you are interested in this role, please send a copy of your current CV using the details provided, interviews will be held locally and the company is looking to recruit this role as soon as possible. ETS Consulting Ltd Recruitment specialists with specific areas of expertise in the Manufacturing, Technical, Engineering and Sales markets. ETS Consulting Limited act as an employment business and employment agency and are registered in England and Wales as ETS Consulting Limited, registered no 06164846. Registered office address 7 Stamford Square, Ashton Under Lyne, Lancashire, United Kingdom, OL6 6QU. If one of our consultants contacts you in relation to this role, please be aware that as part of our registration process you will be required to provide ETS Consulting with proof of your identity along with proof of your eligibility to work in the United Kingdom. TPBN1_UKTJ

Covering Central Region (Midlands) Overview Benefits: Company van provided Accommodation and travel expenses included Exciting opportunity to visit and work at various sites across the UK Job Description: We are seeking a dedicated and qualified Facilities Technician to join our team. The successful candidate will be responsible for supporting new builds and refurbishing existing properties at our various locations across the UK. This role is perfect for someone who enjoys travelling and working in different environments. Responsibilities Key Responsibilities: Lead on all electrical maintenance and installation tasks across our UK sites Carry out troubleshooting and repairs, including basic plumbing, ground maintenance, and decoration Attend to emergency works as needed Support project works and annual compliance checks (e.g. EICR, PAT testing) Collaborate with the wider Facilities team to ensure safe, compliant, and efficient operations Qualifications NVQ 2 Level and/or City & Guilds Level 3 in Electrical Installation 18th Edition Wiring Regulations qualification (desirable) Experience in facilities or building maintenance A valid UK driving licence and willingness to travel extensively A proactive, problem-solving mindset and a team-focused attitude Why Join Us? Be part of a supportive, skilled, and friendly Facilities team Enjoy a varied role where no two days are the same Access to a competitive salary and benefits package Opportunities for training and development Who are Solus? Solus, who are owned by Aviva, are one of the UK leaders in vehicle repairs, returning cars to the road in just 11 days on average and a 4.6/5 star customer rating. With an award-winning apprenticeship programme and winners of other recognised industry awards Solus are proud to be shaping the future of vehicle repair. Why Join Solus? We have so much to offer when it comes to being a Solus colleague: Competitive salary based on location, skills, experience, and qualifications. Bonus opportunity tied to your performance and the overall success of Solus. Company pension scheme with employer contributions. 33 days holiday (including bank holidays), with the option to buy or sell up to 5 days. Save money with up to 40% discount on Aviva products and other retailer discounts. Share in Avivas success through the Aviva Save As You Earn scheme. Supportive policies including parental and carers leave. Wellbeing focus with tools like Group Income Protection and 24/7 GP access. At Solus, we value inclusivity and welcome all applicants. If youre excited but dont tick every box, we encourage you to applyyour unique skills might be just what we need. We guarantee an interview for disabled applicants meeting the minimum criteriajust contact us after applying to let us know. Ready to join us? Apply online today, and our team will be in touch within 14 days. TPBN1_UKTJ

About the Role Dalkia UK is looking for a Mobile Multi-Skilled Service Engineer with a core Electrical background to join our Engineering Services team. What Youll Need Essential: Recognised apprenticeship or SVQ Level 2/3 in Service & Maintenance or Electrical Engineering. Location: Mobile (across

In this role, the successful Apprenticeship Coach would be responsible for travelling across sites in the south west of England which includes Tidworth, Lyneham, Warminster, Colerne, Larkhill, Bulford and more, where you will be responsible for helping people to pass their Electrical apprenticeships

Electrical We are looking for a highly motivated and experienced electrical professional to deliver high-quality training, assessment, and internal quality assurance across our Electrical Apprenticeship provision. Electrical to join our Electrical Apprenticeships team at our Slough & Langley College

Job Title: Refrigeration Engineer Location: Sheffield Pay Range/details: £46,791.53 per annum (incl.13 standby payments) Contract Type: Permanent - Morrisons Omega are supporting a leading facilities management provider in their search for a Refrigeration Engineer work on a major UK supermarket contract. The right Refrigeration Engineer will be the first line in all service and maintenance throughout allocated sites. They will also effectively maintain service and repair Refrigeration Equipment in customer locations and aid HVAC equipment containing refrigeration circuits. Key Responsibilities - Refrigeration Engineer Carry out reactive and planned refrigeration maintenance within agreed timescales. Diagnose faults, identify non-repairable issues and recommend replacements. Complete all PPM, technical and compliance paperwork accurately and on time. Order and fit parts in line with company procedures. Respond promptly to Helpdesk service calls and complete repairs efficiently. Communicate issues affecting store operations to GSMs and build strong working relationships. Complete surveys, reports and job documentation as required. Participate in the out-of-hours standby rota and arrange cover when needed. Working with CO? refrigeration pack systems. Planned on-call rota 1 in 4 weeks (hours of work paid in addition to standby payment) Qualifications & Requirements - Refrigeration Engineer Time-served apprenticeship with NVQ/C&G refrigeration qualification. C&G 2079 / CITB refrigerant handling certificate / F GAs Category 1 Strong refrigeration, electrical, mechanical and diagnostic skills. Ability to read technical drawings and apply relevant H&S legislation. Good communication and customer-facing skills. Self-motivated, professional and able to work at heights using access equipment. Full UK driving licence essential. What we can offer - Refrigeration Engineer 33 Days Holiday (Inc. Bank Holidays). Private Pension. HealthShield Cashback Plan - Reclaim part of your dental/optical costs. OneCity - Employee Discount Platform. Employee Value Awards up to the value of £250. Access to Costco Personal Membership Subscription. Mental and Physical Health Services (Wisdom, Thrive, SkinVision). Electric Car Scheme (Criteria Applies). First Bus Commuter Club - Discounted Bus Travel. For more information on this role, please contact Kieren Provis on 01453 829776 or send a copy of your CV to Candidates who are currently a Refrigeration Engineer, HVAC Engineer, Air Conditioning Engineer, Maintenance Engineer or Service Engineer may be suitable for this position. For details of other opportunities available within your chosen field please visit our website Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. TPBN1_UKTJ

I'm looking for a practical, hands-on Maintenance Engineer who enjoys solving problems, keeping production running, and working in a fast-paced manufacturing environment. If you're the type of engineer who likes getting stuck in, fault-finding electrical issues, and making machinery run better than it did yesterday , this could be a great fit. Our site operates in a high-volume FMCG environment , so reliability, quick thinking, and strong technical skills are essential. The role sits within a large, well-established FMCG manufacturing organisation operating across Europe and supplying major retail and customers internationally. With over 2000+ employees and a multi million pound in annual turnover , the company continues to invest heavily in its manufacturing operations, engineering capability, and production technology across its network of European sites. The site itself runs high-speed automated manufacturing lines, industrial processing equipment, packaging systems, and supporting utilities , creating a fast-paced environment where engineering reliability and technical expertise are critical to keeping production running efficiently. Shift Pattern This is a days-based role with two shift options available : 6:00am – 2:00pm 10:00am – 7:00pm Salary: £49,000 What You'll Be Doing As part of the engineering team, you'll play a key role in keeping the factory running safely and efficiently . Your responsibilities will include: Carrying out planned preventative maintenance across production equipment and site utilities Responding to breakdowns and faults to minimise production downtime Diagnosing and repairing electrical and mechanical issues on manufacturing machinery Supporting production teams by keeping equipment reliable and performing at its best Helping improve machine performance, efficiency, and waste reduction Ensuring work is carried out in line with health & safety and GMP standards Maintaining accurate maintenance records and reports This role will suit someone who enjoys working in a busy manufacturing environment where no two days are the same . What I'm Looking For Strong electrical maintenance experience Ideally an electrical qualification (NVQ Level 3, apprenticeship, or equivalent) or clear evidence of electrical competence Previous experience working in FMCG or food manufacturing Strong fault-finding and problem-solving ability Good communication skills and the ability to work well with production teams What's in it for you? 20 days holiday, plus 8 bank holidays Competative pension and other benefits If you feel this role is something you're looking for, or you want to know more infomation, then reach out via email or call. 01733391515 TPBN1_UKTJ

Our client, a trusted partner of the UK's Ministry of Defence, is seeking a Mechanical Inspector to join the certification team. Electrical/Mechanical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard or. Electrical/Mechanical Engineering / Manufacturing Level 3 academic qual

Electrical Maintenance Engineer Day Shift Fed up with constantly being pulled from one breakdown to the next? Ready for a role where you can actually get ahead of the maintenance curve and make a real impact? This Electrical Maintenance Engineer role gives you the chance to take ownership of a modern, fast-paced production environment where reliability, safety, and continuous improvement genuinely matter. Youll be part of a highly skilled maintenance team, keeping critical automated and electrical systems running smoothly and ensuring the site hits its performance targets every single day. Job Responsibilities Deliver high-quality electrical maintenance across production and process equipment to consistently meet factory performance targets Carry out electrical setup activities, including machine resets, calibrations, and production support Diagnose and repair electrical breakdowns quickly and effectively (PLC faults, motors, sensors, drives, control panels, etc.) Perform planned preventive maintenance (PPM) to minimise downtime and improve reliability Conduct testing, inspection, and verification of electrical systems in line with legislation and site standards Support with installation, upgrade, and commissioning of new machinery, electrical panels, and control systems Respond to first-line issues across site utilities including compressors, chillers, boilers, LV distribution, and control equipment Work safely at all times, following electrical safety rules, isolation procedures, and permit systems Use stores systems and Maintenance Management Systems to accurately record work, parts usage, and maintenance data Contribute to continuous improvement, reliability projects, and root cause analysis Provide occasional mechanical support when required (within competency) Skills and Experience Recognised electrical apprenticeship (City & Guilds, NVQ, or equivalent) Strong experience working on production and process equipment within a fast-paced factory environment Skilled in fault finding on: PLC I/O paths, sensors, relays, motors, drives, inverters, and automated systems Confident working on LV distribution, control circuits, and machine wiring Experience with site utilities (compressors, chillers, boilers) Good understanding of both planned and reactive maintenance within a manufacturing environment Computer literacy for stores systems and CMMS Knowledge of 17th/18th Edition wiring regulations (Beneficial) Mechanical competency Pay and Benefits Salary: £44,000 per annum, plus overtime Outstanding pension scheme - you contribute 4%, the company contributes 10% Annual tool allowance 5 hours per week: MondayFriday, 07:0015:30 or 08:0016:30 30 days holiday per year + 10 additional Fridays off per month (AprilOctober) Life assurance (4x average salary) Company sick pay scheme Onsite free parking Access to buyable benefits such as dental and medical cover Childcare vouchers TPBN1_UKTJ