Trabajos electrical engineer en BedfordCrear alertas

Automation Engineer An exciting opportunity for an experienced Automation Engineer to work on high-speed, custom-built special purpose machinery, supporting projects from concept through to installation and commissioning at customer sites worldwide.This is a hands-on role covering PLC, HMI, motion control and safety systems, with a strong focus on Siemens S7 and/or Rockwell ControlLogix platforms.You’ll take ownership of automation solutions end-to-end, from control strategy and software development through to commissioning and final handover.The role involves close collaboration with electrical design, manufacturing, and service teams, as well as regular interaction with customers. Intermittent international travel is required (approximately 4–5 trips per year) to support installations, upgrades, and troubleshooting.Key Responsibilities • Develop PLC, HMI and motion control software for special-purpose machinery, • Produce control plans, specifications, and FAT documentation, • Support manufacturing, engineering queries, and quality issues, • Carry out installation, commissioning, and fault-finding at customer sites, • Provide remote programming and commissioning support when requiredKey Requirements, • Strong experience with electrical control systems for special-purpose machinery, • PLC programming experience (Siemens S7 and/or Rockwell / Allen-Bradley), • Motion control and servo systems experience, • Safety PLC design and commissioning experience, • Knowledge of safety equipment and relevant standards, • Experience commissioning machinery to FAT protocols, • Strong communication skills and ability to work directly with end usersDesirable:, • Experience supporting SIL-rated safety circuit design, • Siemens Sinamics or Rockwell motion platforms (Studio 5000, Kinetix), • Vision system setup and integration, • Knowledge of Python, C++ or JavaScript

Job Title – Multi Skilled Maintenance Engineer (Electrical Bias) Location – Bedford Salary: £37,000 - £42,000 + Overtime (£5,000 - £10,000 annually) Shift: Monday to Friday, 5:30am - 2:30pm (Flexi start times) Job Role The Multi Skilled Maintenance Engineer will join a fast paced manufacturing business in Bedford where the Multi Skilled Maintenance Engineer will play a key role in keeping production running efficiently and safely. This Multi Skilled Maintenance Engineer position offers strong earning potential with regular overtime and the opportunity to work on a variety of automated and electrically biased equipment within a growing manufacturing environment. The Multi Skilled Maintenance Engineer will benefit from ongoing training, exposure to continuous improvement projects, and real progression opportunities within a stable and expanding market. If you are a Multi Skilled Maintenance Engineer looking for a days based role with excellent overtime and long term security, this is an opportunity not to be missed. Sector – Industrial ManufacturingNon Negotiable Requirements of Multi Skilled Maintenance Engineer * Must have worked as a Multi Skilled Maintenance Engineer in a manufacturing environment * Must be from a Manufacturing background * Must be comfortable working in different working conditions Essential Requirements of Multi Skilled Maintenance Engineer * Electrical bias with mechanical competency * Experience carrying out planned and reactive maintenance * Ability to fault find independently and minimise downtime Desirable Requirements of Multi Skilled Maintenance Engineer * Experience within FMCG or high volume production * Continuous improvement experience * 17th or 18th Edition qualification The Multi Skilled Maintenance Engineer will benefit from: * Working for a stable and growing manufacturing company * Monday to Friday days role with early finish * Significant overtime opportunities * Ongoing training and technical development * Investment in engineering team and site equipment

Bedford Salary - Negotiable DOE plus overtime Monday - Friday shifts plus overtime Your new company: Based in Bedford, you will be joining a large packaging outsourcing company working with a large range of industry-leading businesses within pharmaceuticals, healthcare and more! Due to continuous growth and business needs, the engineering team are seeking a mechanically biased Maintenance Engineer to join their team.Offering a wide range of benefits and plenty of overtime, this is a great long-term role for an experienced Mechanical Engineer. Key Responsibilities & Duties: • Carry out planned preventative maintenance (PPM) on mechanical equipment, • Respond to breakdowns quickly and effectively to minimise downtime, • Diagnose mechanical faults (& some electrical fault-finding), • Work on conveyors, bearings, pumps, gearboxes, hydraulics, pneumatics and general mechanical systems, • Support installation, commissioning and modification of machinery Skills & Experience required: • Strong mechanical engineering background (apprenticeship or equivalent), • Experience in a manufacturing, industrial or production environment, • Good understanding of hydraulics, pneumatics, mechanical drives and rotating equipment, • Ability to read mechanical drawings and technical documentation, • Confident diagnosing and repairing mechanical faults under pressure Click 'apply now' to forward an up-to-date copy of your CV or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us now on for a confidential discussion about your career. Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

Multiskilled Maintenance TechnicianWould you like to work for an employer would give you additional training, development and even possible support for further education? Does working for an employer who rewards you for loyalty and hard work interest you? Yes?.. We would like to hear from you.Our client are a well-established, award winning, leading components & tech supplier, who have been trading for over 50 years. Their company culture is to take pride in providing an innovative, creative and forward thinking environment for their employees. There are a market leader in their industry and are now looking for an Electronically biased maintenance Technician / Engineer to join their team near Kempston, Bedford.The Role: • As Maintenance Engineer, you will carry out scheduled preventative maintenance tasks and services, on predominantly electronic, electrical machinery and equipment as well as working on Mechanical equipment (full training will be provided), • You will be able to perform electronic fault-finding techniques to resolve breakdowns during production periods., • You will record all completed tasks, keep a stock inventory and track order spare parts., • You will communicate effectively, all levels., • You will have a good idea / keen interest in continuous improvement and look at ways to improve current processes., • Apprenticeship qualified or equivalent within an Electronics Discipline, • A positive can-do attitude and willingness to go the extra mile, • You have proven track record with Wafer Fabrications or working in a clean room environment., • You have a proven track record with electrical motors, controls panels, fault finding on PCB's down to component level and soldering., • You are able to follow a logical thought process when troubleshooting issues, • You have a proven track record working in full PPE with chemicals., • You have a willingness to keep learning and developing yourself and your engineering skills., • On-going career progression and Development, • People focused, progressive forward thinking company & team, • Salary £45k DOE, • Company Pension, • Profit Share up-to 8%, • Private Health Care Package, • Gym & Cinema discounts, • Financial support to continue or commence study at University or College., • Double Days Shift Pattern Mon-Friday (6am to 2pm/ 2pm-10pm)

Bedford Salary - Negotiable DOE Monday - Friday 37 hours per week. Your new company: Based in Bedford, you will be joining a well-known and growing manufacturing business specialising in large-scale automated machinery manufacturing. Due to increased business and continuous growth, they are now recruiting for an experienced Electrical Design Engineer to join their design and automation team. The Electrical design engineer will be involved in the design and development of a range of large- and small-scale machinery. With a range of customers, and a large order book, this is an excellent time for an Electrical Design engineer to join an ever-expanding business.Key Responsibilities & Duties: • Carrying out electrical, pneumatic design, • Carrying out the validation of all designs to the current safety standards and requirements, • Carrying out design studies and reviews and preparation of specifications for special applications., • Completion of the FAT document and 'as-built' electrical documentation. Skills & Experience required: • Experience designing electrical control systems for special purpose machinery., • Experience designing safety control systems and validation using appropriate software, • Good understanding of AutoCAD Electrical or EPLAN, • Experience in compiling BOM's. Click 'apply now' to forward an up-to-date copy of your CV or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us now on for a confidential discussion about your career. Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

Electrical Design Engineer Based in Bedford We are an established Bedfordshire-based manufacturer of special purpose machines to household names across the globe and serving a wide range of industries is expanding our in-house engineering team. Due to a sustained period of growth we have an exciting opportunity for an experienced Electrical Design Engineer to join our business. Based at our recently refurbished site on the outskirts of Bedford (within easy reach of the A6 and A421 and free on-site parking) with an early finish on Fridays, you will work on both improving our existing product ranges and the development of new products. In addition, occasionally (approximately 4 to 5 times a year) you will travel both in the UK and Overseas to customer sites to resolve any automation issues regarding commissioning, installation and trouble shooting. This role is ideal for an engineer with strong experience in special purpose control systems, incorporating PLC-control systems such as Siemens S7 and/or Rockwell ControlLogix. Experience with servo drive applications would be a strong advantage. This is an exciting time to join us as we are continuing to expand product ranges, integrating technological advancements, and our development of bespoke solutions to meet specific customer needs means that your work will be interesting and varied. We are looking for a dynamic individual who can take the function forward and embrace the opportunity to directly contribute to NPD and NPI of one of Bedford's most highly respected manufacturers. We invite applications from Controls and Automation Engineers with the following attributes: • Experience designing electrical control systems for automation or special purpose machinery, • Solid understanding of AutoCAD Electrical, • Previously designed safety control systems and used validation software, • Ability to create risk assessments and design safety circuits to meet appropriate SIL level, • Valid Passport and Full driving licence More information available upon application.

Electrical Design Engineer – Special Purpose MachineryAn exciting opportunity for an experienced Electrical Design Engineer to join a growing engineering team delivering bespoke, high-speed machinery to customers worldwide.This role is ideal for someone with strong experience in special purpose control systems, including PLC platforms such as Siemens S7 and/or Rockwell ControlLogix. Experience with servo drives and motion control systems would be advantageous.You’ll take ownership of complex projects from concept through to installation, ensuring compliance with current safety standards and supporting equipment certification. The role involves close collaboration with cross-functional teams and regular customer interaction. Occasional international travel is required (approximately 4–5 trips per year).Key Responsibilities • Electrical and pneumatic system design, • PLC and safety control system design and validation, • Supporting CE certification and safety compliance, • Design reviews, technical specifications and documentation (FAT and as-built), • BOM creation and MRP uploads, • Providing technical support during build, installation and commissioning, • Supporting customer site visits and troubleshooting worldwide Essential Skills & Experience, • Proven experience designing electrical control systems for special purpose machinery, • Safety control system design and validation, • Proficiency in AutoCAD Electrical, • Knowledge of relevant machinery safety standards, • Experience working with end users to define specifications Desirable, • Risk assessments and SIL-rated safety circuit design, • Motion control / servo drive applications About You, • Proactive, organised and detail-oriented, • Strong communicator with a collaborative approach, • Able to manage multiple projects and priorities, • Flexible and willing to travel internationally A fantastic opportunity to work on innovative, bespoke engineering projects with global reach.

Electrical Design Engineer | Bedford | £40,000 - £50,000 Our client works within the special-purpose machinery space and an opportunity has arisen for an Electrical Hardware Design Engineer to join the Engineering function. The successful candidate will work as part of the Electrical Engineering and Automation team and report directly to the relevant Team Leader. The Role: +Develop both conceptual an... ZIPC1_UKTJ

Job Title – Multi Skilled Maintenance Engineer (Mechanical Bias) Location – Bedford Salary: £35,000 - £38,000 + Overtime (£5,000 - £10,000 available annually) Shift: Monday to Friday, 9:00am - 5:00pm Job Role The Multi Skilled Maintenance Engineer will join a well established manufacturing business in Bedford where the Multi Skilled Maintenance Engineer will be responsible for maintaining and improving a wide range of mechanical equipment across site. This Multi Skilled Maintenance Engineer role offers a stable Monday to Friday days position with significant overtime available, allowing the Multi Skilled Maintenance Engineer to realistically earn an additional £5,000 to £10,000 per year. The Multi Skilled Maintenance Engineer will work on conveyors, gearboxes, pumps, bearings, hydraulics and pneumatic systems while supporting continuous improvement projects within a growing manufacturing environment. If you are a Multi Skilled Maintenance Engineer with a strong mechanical bias looking for stability, strong earning potential and long term progression, this is an excellent opportunity. Sector – Industrial ManufacturingNon Negotiable Requirements of Multi Skilled Maintenance Engineer * Must have worked as a Multi Skilled Maintenance Engineer in a manufacturing environment * Must have strong mechanical fault finding and repair skills * Experience working within a production or factory setting Essential Requirements of Multi Skilled Maintenance Engineer * Mechanical bias with basic electrical competency * Experience with conveyors, motors, gearboxes, pumps, bearings, hydraulics and pneumatics * Experience carrying out planned and reactive maintenance * Ability to fault find and minimise downtime independently Desirable Requirements of Multi Skilled Maintenance Engineer * Welding or fabrication skills * Continuous improvement experience * Experience within FMCG or high volume production The Multi Skilled Maintenance Engineer will benefit from: * Monday to Friday days role * £5,000 - £10,000 overtime earning potential * Stable and growing manufacturing business * Ongoing training and development * Investment in site equipment and engineering team If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. For further details contact Adem Halil - As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme.

Electrical/Electronic Engineer Bedford, commutable from: Kettering, Cambridge, Northampton, Luton, Milton Keynes£35,000-£42,000 + Shifts (7am-3pm, 2pm-10pm) + Optional Overtime + Training + Development + Company BenefitsExcellent opportunity for an Electrical / Electronic Engineer with strong hand soldering skills looking to transition into instrumentation within one of the UK's leading research facilities operating in an interesting and unique field.On offer is the opportunity to join a specialist company where you will receive full training in instrumentation while working alongside experienced engineers and developing your skillset in a varied and highly technical role.This company are one of the only facilities in the world that specialise in their niche and they are now looking for a new addition to their team. They are keen to support engineers with transferable electrical or electronic skills who are eager to learn instrumentation and immerse themselves within their bespoke projects and technical work.The day to day of this role includes providing instrumentation support throughout the facility following training, alongside working on bespoke wiring and hand soldering of fine electronic components. This role works on a rotating shift pattern (7am-3pm, 2pm-10pm) and has lots of optional overtime available.The ideal candidate will have an electrical or electronic engineering background with a relevant qualification (e.g. HND/HNC) and experience with hand soldering and working with fine electronic components. Wiring experience of fine components is advantageous but not essential.The candidate must hold a British passport and be able to pass security clearance.The role: * Instrumentation Engineering * Electrical wiring and hand soldering of fine components * Mon-Fri, rotating shift pattern * Site based in BedfordThe person: * Electrical / Electronic engineering background * Hand soldering experience * Electrical qualification (HND/HNC) * British passport * Must be able to pass security clearanceReference Number: BBBH270887To apply for this role or to be considered for further roles, please click "Apply Now" or contact Eve Terry at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.

Electrical Design Engineer Based near Bedford £53,000–£54,000 per annum Are you an experienced Electrical Design Engineer looking for a hands-on, hardware-focused role within a specialist machinery manufacturer? This is an opportunity to join a well-established engineering business that designs and manufactures bespoke industrial machinery for key sectors.What’s on Offer • Competitive salary: £53,000–£54,000, • Hybrid working: 2 days from home / 3 days in the office, • Stable, specialist manufacturing environment, • Supportive team culture with on-site productionThe Role Reporting to the Electrical Engineering & Automation Team Leader, you will join a close-knit team. You’ll play a key role in the conceptual and detailed design of special-purpose machinery. Your responsibilities will include:, • Creating electrical circuit designs from written specifications, • Producing complete schematic drawing packages, • Generating and maintaining Bills of Materials within the ERP system, • Designing for manufacture and assembly, • Liaising with suppliers on purchased components, • Supporting production, service, and sales teams, • Developing test plans and procedures, • Supporting projects to demanding timescales and budgetsThis role is predominantly office-based, particularly as manufacturing is on-site and collaboration with production teams is key.About You We’re looking for a motivated and practical Electrical Design Engineer who thrives in a collaborative engineering environment.Essential:, • 1+ year of EPLAN experience would be desirable, however other electrical CAD packages will be considered., • Familiarity with AutoCAD Electrical, • Degree, HND or equivalent experience in Electrical Engineering, • Strong understanding of electrical circuit diagrams and symbols, • Proven experience in electrical hardware design, • Knowledge of EN60204 and EN13849If you’re an experienced Electrical Hardware Design Engineer looking to take ownership of technically challenging projects in a manufacturing-led business, we’d love to hear from you.

Bedford Salary - £ - Negotiable DOE Monday - Friday Your new company: Based in Bedford, you will be joining a well-known and growing manufacturing business specialising in large-scale automated machinery manufacturing. Due to increased business and continuous growth, they are now recruiting for an Automation Engineer with experience with PLC/HMI systems (Siemens S7 or Rockwell Control Logix) within an automated machinery environment.Offering a very competitive and negotiable package, with a wide range of benefits, this is an excellent time to join an expert in their field.Key Responsibilities & Duties: • Carry out electrical engineering design and software development on machinery, • Carry out PLC commissioning and support global installations (4-5 trips/year), • Collaborate across departments and liaise directly with customers, • Troubleshoot and resolve engineering issues, • Completion of the FAT document and 'as-built' electrical documentation. Skills & Experience required: • Experience in a similar role, within an automated machinery environment, • Experience with Siemens S7 and/or Rockwell Control Logix - Other experience will be accepted, • Ability to commission machinery, • Open to occasional international travel. Click 'apply now' to forward an up-to-date copy of your CV or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us now on for a confidential discussion about your career. Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

We have an exciting opportunity for a Field Service Engineer based in Bedford for one of our clients on a Full time permanent basis. Summary of the Field Service Engineer role Salary: £40,000 - £45,000 DOELocation: Bedford Type of Contract: Permanent Hours: 40 Hours Responsibilities of theField Service Engineer • Repair, refurbishment, installations & commissioning of machinery, • Travel across the UK and Ireland, • You will also be expected to travel to Italian Head Office occasionally for training and & machine testing and very occasionally deployed worldwide if required, • Overtime paid door-to-door outside of normal working hours, • Qualified Multi Skilled Engineer (Mechanical / Electrical), • Ability to read electrical diagrams and fault find from them, • Ability to mechanically fault find and repair, • Good fault diagnosis / problem solving skills, • Basic PLC Fault Finding knowledge, • Willing to travel within UK & Ireland (Some overseas travel may be required), • Willing to work away from home for periods up to 5 days (or more on occasions), • Willing to work changeable hours, • Full Clean Driving License, • Ability to use MS Office, • Good Communication Skills, • Report Writing Skills, • Able to work independently or part of a team Thank you for your interest in this role. One of our Recruitment Specialists will review your application shortly. Due to the high volume of applications, we regret that we can’t respond to everyone directly. If you don’t hear from us within seven days, please assume you have not been successful this time.

Overall Purpose: The Site Engineer is responsible for supporting and delivering site-based engineering works while strengthening operational resilience, reducing key-person dependency, and enabling future growth. The role provides critical support to site activities including installation and commissioning, also contributing to workshop operations when not deployed on site. Key Responsibilities: • Deliver site-based engineering works in line with project scope, safety, quality, and schedule requirements., • Support installation, commissioning, troubleshooting, and rectification activities on customer sites., • Liaise with project managers, customers, and internal stakeholders to ensure effective delivery outcomes., • Identify and resolve technical issues encountered during site works., • Work alongside the existing Site Engineer to provide coverage, workload balancing, and continuity., • Support documentation, standardisation, and knowledge transfer of site engineering processes., • Provide hands-on engineering support within the workshop during non-site periods., • Assist with the production, assembly, testing, and improvement of OEM products., • Comply with all company, site, and customer safety requirements., • Ensure all work meets internal quality standards and customer expectations., • Contribute to continuous improvement initiatives across site and workshop operations. Person Specification: • Engineering qualification (Mechanical, Electrical, or related discipline) or equivalent practical experience., • Proven experience in site-based engineering, installation, commissioning, or field service., • Strong fault-finding, problem-solving, and hands-on technical capability., • Ability to work independently on site and collaboratively within cross-functional teams., • Strong communication skills and customer-facing experience., • High awareness of safety, quality, and compliance requirements.

Location Stewartby, Bedfordshire, UK - must live within a short commute of Stewartby Department Engineering Reporting To Engineering Director Role Overview Andersen EV Plc is the UK leader in the design, development, manufacture, sale and distribution of prestigious, smart-enabled domestic and work-place charging points for electric vehicles. We are proud of our reputation for quality that has enabled partnerships with car manufacturers and energy companies, including, but not exclusively, Jaguar Land-Rover, Porsche, Renault, Geely, Octopus Energy and OVO. We are looking for a multi-skilled Head of Quality and Product Reliability to be responsible for the quality of our products and services and to also have control and investigation of all units and equipment that have been returned by or on behalf of our customers. We have high quality standards and expect minimal product issues. We are proud of outstanding customer satisfaction and as our success grows with market expansion, we must ensure that all our products and services meet the highest level of quality and reliability. Furthermore, any emerging faults or issues must be identified at the earliest possible point and then eradicated from our production and systems. Following product training, the successful applicant will be expected to have the necessary level of skills to differentiate between hardware, firmware and software faults and issues. In respect of hardware with digital and analogue circuits, you will have the ability to fault find down to component level and will be able to identify design defects and errors. In respect of firmware and software you will be able to identify the systems and sub-systems causing errors and faults and be able to demonstrate the deficiency to the design engineers responsible for the firmware and software. You will be skilled at replicating reporting faults and errors. You will have an understanding of mechanical engineering and will be adept at using accurate, high resolution, measuring equipment. You will be responsible for all aspects of quality, ensuring that products and services reach our customers in pristine condition and superbly presented. For example, you will ensure that all our packaging is extremely robust to ensure that there is no risk of damage when in transit with third-party couriers. This is a senior role, and you will be expected to ensure that all persons having responsibility for the maintenance of quality standards within the company carry out quality related processes with due diligence and in a timely manner. You will have sufficient supervisory experience to ensure that your will prevails. It is envisaged that you will have significant experience of working to build quality and product reliability within a small to medium sized company that produces smart enabled or IoT electrical and electronic products. Duties You will be an integral member of the Engineering Team, reporting to the Engineering Director. You will have a proactive role in all development projects, whether relating to products or services, to ensure the highest level of quality and that prior to commercial release the product or service is of exemplary standards of quality and free from inherent fault. Your input and recommendations will be a key focus of the sign-off process. You will also ensure ongoing conformity of all constituent parts and systems. On a daily basis, you will check all received returned units and parts that are related to a fault report and remedial action that has taken place at the customer’s address. You will check that all returned units and parts are accompanied by the correct documentation. You will report any errors in the returns process. You will then examine the returned units and parts. In the case of a fault, you will investigate the unit, in our fully equipped laboratory, to pinpoint the fault and the root cause, which you will document and report. In the case of a hardware fault, you will fully identify the design or component defect and make recommendations for the immediate action to be taken to eradicate that fault from further occurrences. In the case of a firmware or software issue, you will identify the system or sub-system that is faulty or has incompatibilities or bugs and you will document and report the fault, which will then be allocated to a firmware or software design engineer in the team, with whom you will support in validating the elimination of the fault. You will also work closely with hardware design engineers within the team. You will directly supervise an assistant who will be responsible for booking in product returns, confirmation of fault categories, and initial testing as directed by you. Following the technical investigation that is carried out by you or at your direction, your assistant will also strip, restock or otherwise dispose of returned products. You will have significant interface with senior management and will have considerable input into staff training and definition of new processes, whilst maintaining cost effective overheads and not introducing unnecessary bureaucracy. Qualifications and Experience Selection of the successful candidate will be based upon ability, but you will likely be educated to degree level in electronic/electrical engineering. You will have an understanding of mechanical engineering. You will be self-motivated and have a strong proactive motivation to permanently solve faults, problems and issues. You will be expected to work methodically and contribute to the overall excellence of the Engineering Team. You will have had a minimum of five years’ experience in a quality assurance role with management responsibilities. You will have previously held a position of ensuring quality and product reliability within a small to medium sized business. You will be entirely conversant with fault finding and fault resolution with electronic and IOT products. It will be advantageous to be conversant with ISO 9001:2015 and the quality requirements for a Business Management System. Salary £60,000 to £65,000 per annum Benefits • Salary Sacrifice Electric Car (optional), • Company events, • Company pension, • Employee discount, • On-site parking (free) Schedule • Monday to Friday 09:00 to 17:30 with one hour for lunch Ability to commute · Must be able to reliably commute to Bedford, MK43 9ND, on a daily basis • Will live within 30 miles road distance from MK43 9ND Job Type · Full-time Work authorisation • United Kingdom (required) Work Location · Stewartby. In person. There is no remote or hybrid working.

Job Description – Field Service Engineer - Bedford / Luton (Surrounding areas) Are you looking for a new challenge and want to embark on a new journey? Then look no further! At Stern Energy we have an opportunity for a Field Service Engineer in Bedford. This position has come at an exciting time for our fast-growing company. Your location: Bedford/Luton The right candidate shall have experience in the electrical installation and maintenance of industrial sites and specific knowledge of DC electrical systems. You will have previous experience or technical knowledge of photovoltaic systems and high-voltage systems. Good ability and confidence on using basic electrical equipment such as multimeters and insulation testers is required. Who are we? Stern Energy operates ground-mounted photovoltaic systems for over 769 MW in the UK. We are among the largest operators in Europe, with activities in 5 countries and over 2.8 GW under management. We are specialised in proposing and executing revamping and repowering projects to enhance the performance of the assets we operate. How do we work? EXPERTISE, RESPONSE, TRANSPARENCY AND PASSION: our values guide our work. Our professional commitment is to translate the expertise gained into maximum plant efficiency and maintenance of long-term performance. We provide an integrated, timely and effective service based on a "Total Quality" approach of experience, know-how and nationwide services. We continually invest in equipment and technology to refine our procedures and operating methods; we provide our services through internal staff to ensure autonomy and maximum responsiveness. Transparency is key to our work so that our customers can rely on constant control of the plants and the quality of services provided. Customer relations is our passion to building a lasting relationship of trust. We have a dedicated internal team of specifically qualified, multi-disciplined engineers boasting significant expertise, all of whom are solution providers. Main responsibilities • Visual inspection activities, cleaning and reporting to the management team., • Routine maintenance activities on modules, inverters, cables and connectors, and DC and AC distribution boxes., • Routine maintenance activities on module mounting systems, fences and gates, and inverter and transformer stations (excluding equipment)., • Routine maintenance activities on monitoring and communication equipment (data loggers, routers, sensors, etc.)., • Routine maintenance activities on security system devices (cameras, barriers, etc.)., • Fault finding on electrical components by means of visual inspections or professional site measurement activities (thermal imaging, insulation tester, etc.)., • Execute corrective measures to keep the system available., • Engage and manage subcontractors., • Called to perform reactive and corrective maintenance activities as well as, from time to time, to manage subcontractors and control the quality of activities performed., • The site technician shall give availability for working from time to time during weekends and bank holidays. Skills and qualifications • Minimum of 3-5 years’ experience in electrical installation and maintenance, preferably in industrial or utility-scale environments., • Proven experience or technical knowledge of photovoltaic (PV) systems., • Strong knowledge of health and safety regulations and best practices., • Proficiency in using electrical testing tools, • Good working knowledge of Microsoft Office applications, • Ability to work independently and manage time effectively, • Strong communication skills, • Problem-solving mindset, • Team player, • Professionalism, • Valid and clean car driving licence., • NVQ Level 3 electrical certification. A great benefit package to include: • Employee Assistance Programme, • Pension scheme, • Bonus scheme, • Company sick pay, • Inflation support scheme, • Team-building days, • Great company culture and regular social events, • Wellness Wednesday for 30 minutes every week for mindfulness on top of lunch break, • Extensive learning and development programme, • Regular wellbeing check-ins, • Company mobile phone, • Laptop, • 25 days of annual leave plus Bank holidays, • TOIL mechanism – built up for hours worked in the week which can be used in the form of TOIL or accumulated and paid at the end of the financial year., • Hours worked for call-outs to be paid at the end of each month., • standby call-out payments, • Vehicle with fuel cards At Stern Energy, we are deeply committed to promoting equity and inclusion, and we celebrate the diversity of our team—both those who are with us today and those who will join us in the future. We encourage applications from individuals of all backgrounds, regardless of gender, gender identity, national origin, religion, social, cultural, or ethnic background, sex, sexual orientation, age, disability, pregnancy, veteran status, or any other characteristic protected by law. Our hiring decisions are based solely on business needs, job requirements, and qualifications. We strive to be an equal opportunity employer, fostering an inclusive environment where everyone is respected and free from discrimination or harassment.

Electronics Engineer 12 month contract Based in Ampthill Offering circa £63ph Inside IR35 Do you have experience in Electronics Hardware Design? Do you have experience in Digital and Analogue Electronics Design? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Electronics Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. Due to the nature of the work you will be involved in, you will be required to obtain UK SC clearance in this role. You will be involved in: • Take responsibility for the design, development, and support of mixed electrical/electronic solutions from concept to completion, • Provide guidance and governance to the team in the integration of the deliverables, supporting as necessary assembly and installation, • Define processes, specifications, and procedures that support the design and manufacture of the electrical/electronic hardware, • Provide technical review of supplier capabilities to facilitate source selection, • Facilitate the development of functional and physical design requirements, • Design and development of electrical/electronic circuitry (including analogue, digital, microprocessor, FPGA design techniques), • Schematic Capture and associated PCB layouts, • Analysis, test and evaluation of electronic/electrical circuits and components, • Electronic circuit simulation and analysis Your skillset may include: • Experience in Electronics Hardware Design & Product Development, • Experience in Digital and Analogue Electronics Design, • Experience with Windchill or other Product Lifecycle Management tool, • Experience with Schematic Capture, PCB Layout (Altium Designer) and IPC awareness, • EMC Awareness at product and PCB level, • Support and manage aspects of Assembly, Integration and Test, • Produce technical documentation to support all activities, from trade studies, requirements documentation, compliance evidence and test documentation, • Experience of using DOORS for requirements capture, • Proven Hardware Sell-Off experience, • Preparation of FMEA’s, • Awareness of IEC61508, • Experience with 28V power distribution systems If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further!

Mechanical Maintenance Engineer This is a Mechanical Maintenance Engineer role where your hands-on ability actually matters. If you enjoy fault-finding, keeping production moving, and being relied upon, this Mechanical Maintenance Engineer opportunity is built for you. This Mechanical Maintenance Engineer role sits within a regulated pharmaceutical environment, supporting a multi-line production site operating a late shift. The focus of the role is hands-on engineering responding to breakdowns, resolving mechanical faults, and ensuring production downtime is kept to an absolute minimum. The role is predominantly mechanical, with exposure to pneumatics and basic electrical fault finding, and offers structured onboarding, paid overtime, and long-term stability. This is a role for someone who has a no job is too small mentality, enjoys being on the tools, problem-solving independently, and taking ownership of engineering issues as they arise. Job Responsibilities • Responding to breakdowns across multiple production lines to minimise downtime, • Diagnosing and repairing mechanical faults including motors, bearings, shafts, rollers, and drives, • Carrying out reactive maintenance as the primary focus of the shift, • Completing planned preventative maintenance tasks where scheduled, • Fault finding on pneumatic systems<...

Air Conditioning Engineer Location: Bedfordshire, Buckinghamshire, or Hertfordshire We are looking for skilled, but also semi-skilled Engineers to join our family friendly team. We operate a no on-call, no weekends, and no London work policygiving you your personal time back and allowing you to fully enjoy weekends and bank holidays. As an Air Conditioning Engineer, you will be take part in installations, maintenance, and repair of air conditioning and HVAC systems across commercial and residential sites. Key Responsibilities: • Install air conditioning systems, including split, VRV/VRF, packaged units, and ventilation systems., • Carry out routine maintenance and servicing., • Diagnose and repair faults, including refrigerant leaks, electrical issues, and component failures., • Conduct system testing, including pressure and leak testing. Ensure compliance with F-Gas regulations and health & safety standards., • Previous experience in HVAC installation, servicing, and repairs., • F-Gas certification (mandatory for skilled engineers, but open for non-skilled), • Knowledge of various air conditioning systems (split, VRF/VRV, etc.)....

We are seeking a Product Development Electrical Engineer to join an innovative engineering team developing low‑voltage electrical products used in modern data centre and cooling technologies. The role involves designing and developing electrical systems from concept through to production release, ensuring products meet customer requirements, manufacturing capabilities, and regulatory standards. Key Responsibilities * Design and develop low-voltage electrical products from concept through to production. * Create electrical schematics, wiring diagrams, calculations and detailed design documentation. * Engineer power modules, power-distribution assemblies and control circuits operating at 24VDC, 48VDC and 240VAC. * Design electrical architectures that integrate with pumps, heat exchangers and cooling-system components. * Develop PCB or PCB/A solutions for power distribution, control circuits and embedded control systems. * Collaborate with mechanical, manufacturing and industrialisation teams to optimise designs for production. * Support DFMEA/PFMEA activities, design reviews and cost optimisation initiatives. * Assist with prototype builds, verification testing, electrical safety testing and functional validation. * Troubleshoot and resolve electrical or system issues identified during development or testing. * Maintain accurate documentation including BOMs, specifications, test reports and e...

Field Service Engineer – Industrial Combustion Location homebased with regional & occasional national travel Seeking engineers in Midlands, East Midlands, South East, Oxfordshire, Cambridgeshire, Bedfordshire Salary Basic negotiable + typical earnings £60 – 85k depending on overtime + car or van + overtime / allowances + pension + 25 days holiday 39 hours / door to door pay Overtime is not compulsory and very much optional although its generally always available The Person: * Experienced working on large industrial burners (2MW and above) * Industrial or commercial gas experience essential (eg one or more of the following COGN1, CIGA, BMP1, TPCP1, CONGLP1 or similar) * Some electrical skills and experience required * Training and shadowing available for the right person but some prior qualifications & experience with industrial gas and burners required. * May suit ex marine / navy engineers. The Job: * A mix of routine scheduled service, breakdowns / repairs, installation and commissioning projects * Work with industrial and commercial companies providing services for burners, combustion technology, packaged plant rooms, steam & HW boilers, process, incineration, power generation. * Electrical skills and experience required * Stay away from home 6 nights per month on average. Regional / local work but required to cover other areas as required. The Company: * ...

Electrical Design Engineer Bedford £40K-£52K per annum Overview An established engineering manufacturer is seeking an Electrical Design Engineer to join its Engineering Department. Reporting to the Electrical Engineering & Automation Team Leader, you will be responsible for the design and development of electrical hardware and control systems for special-purpose industrial machinery. This role offers hands-on involvement across the full project lifecycle-from concept and detailed design through to manufacture, testing, and support. Key Responsibilities Conceptual and detailed electrical design of industrial machinery Design of control systems including variable speed drives, PLCs, and fieldbus systems Converting written specifications into full electrical designs, including schematic drawings and bills of materials Designing systems for manufacture and assembly Liaising with suppliers on bought-out components and working closely with internal departments Developing test plans and commissioning procedures Leading or supporting development and customer projects to agreed timescales and budgets Providing technical support to sales, service, and production teamsRequirements: Essential: Degree or HND in Electrical Engineering (or equivalent experience) Strong understanding of electrical engineering principles and circuit diagrams Familiarity with EN60204 and EN13849 Minimum 1 year's experience using EPLA...

We have an exciting opportunity for a Compressed Air Engineer based in Bedford for one of our clients on a Full time Permanent basis. Summary of the Compressed Air Engineer role Salary: £35,000 - £39,000 Location: Bedfordshire Type of Contract: Permanent Hours: Monday Friday 8am-5pm Responsibilities of theCompressed Air Engineer • Maintain, repair and install compressed air systems and related equipment, • Run diagnostic tests to find and fix system issues, • Log job reports, • Travel to customer sites within a 30 mile radius to repair equipment, • Experience in a similar Service Engineer role, • Electrical and mechanical skills, • Experience in scheduled maintenance, • Fault diagnosis and repair experience, • Training and ongoing opportunities, • 25 days holiday plus bank holidays, increasing to 30 days the longer you are with them, • Company vehicle and specialist tools, • Healt...

Electrical and Systems Engineer Electrical and Systems Engineer to work across a broad spectrum of existing and new motorsport and automotive projects. This extremely varied and challenging position requires an individual with sound knowledge and depth of experience in motorsport electronic and electrical components, ideally within the race or high-performance automotive sector. The successful candidate will have the enthusiasm, drive, and passion to work within the motorsport industry. Duties will <...

Engineer – £32,000 per year (Temp to Perm) Location: Bedford Contract: Temp–Perm Salary: £32,000 per annum About the Role We’re looking for a reliable and skilled Small Tools Fitter to join our team on a temp‑to‑perm basis. If you have experience working with small tools, enjoy hands‑on technical work, and take pride in keeping equipment safe and fully operational, this could be a great fit. Key Responsibilities * Repairing and maintaining a range of small tools and equipment * Carrying out calibration work to ensure tools meet required standards * Performing PAT testing in line with safety regulations * Diagnosing faults and completing repairs efficiently * Keeping accurate service and maintenance records * Ensuring all work is completed to a high standard of safety and quality What We’re Looking For * Previous experience as a small tool’s fitter, technician, or similar role * Knowledge of tool repair, calibration, and electrical safety * PAT testing experience (qualification desirable) * Strong attention to detail and problem‑solving skills * Ability to work independently and as part of a team What We Offer * Competitive salary of £32,000 per year * Temp‑to‑perm opportunity with long‑term stability * Supportive working environment * Training and development o...

Electrical Design Engineer Based in Bedford We are an established Bedfordshire-based manufacturer of special purpose machines to household names across the globe and serving a wide range of industries is expanding our in-house engineering team. Due to a sustained period of growth we have an exciting opportunity for an experienced Electrical Design Engineer to join our business. Based at our recently refurbished site on the outskirts of Bedford (within easy reach of the A6 and A421 and free on-site parking) with an early finish on Fridays, you will work on both improving our existing product ranges and the development of new products. In addition, occasionally (approximately 4 to 5 times a year) you will travel both in the UK and Overseas to customer sites to resolve any automation issues regarding commissioning, installation and trouble shooting. This role is ide...

Bedford Salary - Negotiable DOE plus overtime Monday - Friday shifts plus overtime Your new company: Based in Bedford, you will be joining a large packaging outsourcing company working with a large range of industry-leading businesses within pharmaceuticals, healthcare and more! Due to continuous growth and business needs, the engineering team are seeking a mechanically biased Maintenance Engineer to join their team.Offering a wide range of benefits and plenty of overtime, this is a great long-term role for an experienced Mechanical Engineer. Key Responsibilities & Duties: • Carry out planned preventative maintenance (PPM) on mechanical equipment, • Respond to breakdowns quickly and effectively to minimise downtime, • Diagnose mechanical faults (& some electrical fault-finding), • Work on conveyors, bearings, pumps, gearboxes, hydraulics, pneumatics and general mechanical systems, • Support installation, commissioning and modification of machinery Skills & Experience required: • Strong mechanical engineering background (apprenticeship or equivalent), • Experience in a manufacturing, industrial or production enviro...

Industrial Door & Loading Bay Engineer Bedford Up to £22 per hour A well-established, midlands-based door maintenance specialist is currently looking to bolster its engineering team and is targeting an additional Industrial Door Engineer to cover the region stretching from Northampton, Milton Keynes across to Oxford. The package on offer includes a starting hourly rate of up to £22 per hour, door to door pay, overtime paid at 1.5 or 2.0 dependant on time, low frequency call out rota, annual bonus, regular incentives, paid Christmas shutdown, and more. The company install, maintain, and repair a wide range of equipment including industrial doors, roller shutters, speed doors, gates, barriers, and automatic doors. The workload for this position is heavily bias towards industrial doors, speed doors, and loading bay equipment therefore, experience in this area is key. Applicants do not need to be competent working on automatic doors, gates, and barriers as enhanced training and support provided, however, your starting rate will be reflective of your experience and training required. As an Industrial Door Engineer, you will be responsible for: Servicing, maintaining, and repairing loading bays, dock levellers, dock shelters, buffers, wheel guides, traffic light systems, sectional doors Maintenance of automatic gates and car park barriers Basic electrical wiring Fault finding on electrical, mechanical, and electronic...

We are looking for a keen and experienced service engineer, fitter, technician or mechanic to join our team. This is a fantastic opportunity for someone who is either an experienced powered access engineer OR maybe you are an experienced car mechanic, plant fitter or similar and want to do doing something a bit different. As a Workshop Service Engineer for Nationwide Platforms you will work within a busy depot to inspect, repair and maintain our machines ensuring that they are ready for use by our customers. Our machines are powered access machines such as booms and scissor lifts but don't worry full training will be given. So, providing you have a great attitude and are willing to learn plus have some mechanical/ electrical engineering experience behind you then this could be the role for you. In reward we can offer you a competitive salary, life assurance x2 contractual salary, Westfield health care plan, 25 days holiday and a pension. Working hours are Monday - Friday 8am - 5.30pm. Responsibilities include: - • Support the Senior Service Engineer in the effective running of the Depot workshop within the region., • Carry out pre-delivery inspections (PDI) of machines at client premises and at depot as required, and in conformance with manufacturer's specification, company policy and the regulations affecting the use. Ensure that there is no deficiency or defect likely...

Job Title: Electrical Design Engineer Location: Hybrid – 3 Days Office / 2 Days Home-Based Salary: £40-50k Sector: Special Purpose Machinery We are working with a leading manufacturer of special purpose machinery who are looking to add an experienced Electrical Design Engineer to their growing engineering team. This is a fantastic opportunity to join an innovative business delivering bespoke automated and engineered solutions across a range of industrial sectors. The role offers a hybrid working pattern with 3 days in the office and 2 days working from home. The Role: As an Electrical Design Engineer, you will be responsible for the design and development of electrical control systems for bespoke machinery projects from concept through to completion. Key responsibilities include: * Electrical design of control panels and machinery systems * Producing electrical schematics and layout drawings * Creating Bills of Materials (BOMs) * Supporting project teams throughout build and commissioning phases * Ensuring designs comply with relevant industry standards Requirements: * Proven experience in electrical design within a machinery, automation, or manufacturing environment * Strong working knowledge of EPLAN or AutoCAD Electrical * Experience designing control panels and electrical systems * Understanding of...

Maintenance Engineer - Part-Time (Thursdays Only) Bedfordshire 12-Hour Shift Every Thursday We're recruiting a Maintenance Engineer to join a bakery site, working as part of an established engineering team carrying out PPMs on production equipment. The Role: You will be working as part of a maintenance team responsible for carrying out planned Preventative Maintenance (PPMs), working on industrial bakery equipment including: • Ovens, • Mixers, • Conveyors, • Identifying and resolving potential mechanical and/or electrical issues, • Ensuring equipment reliability and minimal downtime, • Maintaining high health & safety standardsThe Ideal Candidate:, • Qualified Maintenance Engineer (Mechanical, Electrical or Multi-Skilled), • Experience in food production, FMCG, or bakery environments preferred, • Experience working on conveyors, mixers, ovens or similar production machinery, • Able to work effectively within a team, • Proactive and safety-conscious, • Consistent weekly shift, • 12 hours every Thursday, • Competitive hourly rate (DOE) Interested? Apply now for immediate consideration. AMRT1_UKTJ ...

Are you a Siemens Engineer who wants to get off the road??? If you are then I have an excellent rolewith one of the fastest growing and largest IndependentBMS systems houses in the UK. After continuous growth over the last few years since the lock-down period they are looking to strengthen their Support team in the South East.They see themselves as a dynamic, friendlycompany that invests in its people and prides itself on its family culture -They are a close knit team who always look to help each other out. What am I looking for: I am looking for an experienced BMS Support Engineer with Siemens experience who is tired of running around the motorway network in the South East and has a desire to make a site their own. They must have a customer-focused attitude, a great aptitude for problem-solving and excellent communication skills who is competent with Siemens PX, ABT and Desigo CC. You will be from a BMS background with strong HVAC plant knowledge, an understanding of HVAC control theory and electrical qualifications. Territory: This role will require you to cover two large hospitals in Bedfordshire. This is a full time semi static role where you will be home-based and partially mobile. What the role requires

Field Maintenance Engineer Bedfordshire & Surrounding Areas Up to £50,000 basic DOE with OTE around £70,000 per annum. Full Time / Permanent 45 Hours per Week Are you an experienced Engineer with a background in rail, mechanical or electrical systems? Would you describe yourself as a proactive, hands-on individual who takes pride in delivering high-quality maintenance and repair work? This role involves carrying out planned preventative maintenance (PPM), reactive call-outs, and scheduled repairs to client assets within depot environments. You will be working across Stockport and surrounding areas, with travel and occasional overnight stays required depending on business needs. In return, we offer a competitive salary up to £50,000, company van, pension contribution, Life Insurance, 25 days annual leave plus bank holidays and your birthday off, ongoing training opportunities, and career progression within a growing engineering business. Duties for this role will include: Carrying out maintenance and repair of client assets as scheduled or instructed by the Manager or Operations Supervisor Acting as the first point of contact for clients on site Ensuring all site procedures are followed, including booking on/off site Completing job sheets, PPM forms, and site reports daily and submitting within working hours Adhering strictly to company policies, procedures, and safety regulations Understanding a...

Bedford Salary - Negotiable DOE plus overtime Monday - Friday shifts plus overtime Your new company: Based in Bedford, you will be joining a large packaging outsourcing company working with a large range of industry-leading businesses within pharmaceuticals, healthcare and more! Due to continuous growth and business needs, the engineering team are seeking a mechanically biased Maintenance Engineer to join their team.Offering a wide range of benefits and plenty of overtime, this is a great long-term role for an experienced Mechanical Engineer. Key Responsibilities & Duties: Carry out planned preventative maintenance (PPM) on mechanical equipment Respond to breakdowns quickly and effectively to minimise downtime Diagnose mechanical faults (& some electrical fault-finding) Work on conveyors, bearings, pumps, gearboxes, hydraulics, pneumatics and general mechanical systems Support installation, commissioning and modification of machinery Support production & quality team This is just a summary of duties, and other responsibilities will be required. Skills & Experience required: Strong mechanical engineering background (apprenticeship or equivalent) Experience in a manufacturing, industrial or production environment Good understanding of hydraulics, pneumatics, mechanical drives and rotating equipment Ability to read mechanical drawings and technical documentation Confident diagnosing and repairing mechanical faults ...

Excellent opportunity to join a major player in the solar energy sector. The company is a specialist technical service provider for photovoltaic (PV) plants, focusing on the management, construction and maintenance of utility-scale and industrial solar projects. They are looking for a Solar Field Service Engineer for the Bedfordshire region. It's a very exciting time to join this fast-growing company. The right candidate will have experience in the electrical installation and maintenance of industrial sites and specific knowledge of DC electrical systems. You will have previous experience or technical knowledge of photovoltaic systems and high-voltage systems. Good ability and confidence in using basic electrical equipment such as multi-meters and insulation testers is required. Main Responsibilities for the Solar Field Service Engineer will include:- • Visual inspection activities, cleaning and reporting to the management team., • Routine maintenance activities on modules, inverters, cables and connectors, DC and AC distribution boxes., • Routine maintenance activities on module mounting systems, fence and gates, inverter and transformer stations (excluding equipment)., • Routine maintenance activities on monitoring and communication equipment (data logger, routers, sensors, etc.)., • Routine maintenance activities on security sy...

I'm currently recruiting for a Maintenance Engineer to join a leading food manufacturer with sites across the UK and Ireland, employing over 5,000 people, and supplying high-quality products to retailers and foodservice providers worldwide. With a strong focus on sustainability, innovation, and growth, it offers exciting opportunities to be part of a business that's driving excellence in the global food industry. You'll be working Monday to Friday during the day, with lots of overtime available! What you'll do: Tackle equipment breakdowns head-on and keep downtime to a minimum Carry out preventative maintenance that ensures smooth operations Troubleshoot and resolve mechanical and electrical challenges with confidence Support continuous improvement and efficiency in a fast-paced production environmentWhat we're looking for: A BTEC/C&G in Electrical/Mechanical Engineering or equivalent qualification 18th Edition training (this would be good) Post-apprenticeship experience in food manufacturing or previous work in a fast paced FMCG environment Competence working on / carrying out electricity work/repairs & troubleshooting Excellent organisational skills, with the ability to plan and prioritise workloads effectively to meet deadlinesWhy join? Competitive pay, great benefits, and job security Ongoing training & career development opportunities Be part of a forward-thinking food manufacturing company where your...

Electrical Site Manager £50,000 - £55,000 + Career Progression + Training + Private Healthcare + Vehicle & Fuel Card + Company Benefits Home Based (Ideally located: Reading, Slough, Watford, Oxford, Aylesbury, Luton, Bracknell, High Wycombe, Leighton Buzzard or surrounding areas) Are you an experienced Electrician looking to step up into a leadership role with a market-leading manufacturer that offers specialist training and excellent long-term career progression? This is a fantastic opportunity to take on a fully autonomous role within a specialist industry, where you'll play a key part in driving company growth while further developing your career. This multi-million-pound organisation is a pioneering name within its field and, with exciting plans for expansion, is now seeking an Electrical Site Manager to lead its electrical installation department. In this varied and dynamic position, you will oversee the installation of bespoke electrical systems, manage sub-contractors, and travel to client sites across the UK. The role offers a 50/50 split between on-site work and office or home-based management responsibilities. This position would suit an experienced Electrician or Electrical Engineer who is ready to take the next step into a leadership role with an ambitious, forward-thinking business that offers outstanding career progression opportunities. The Role: Managing and leading the Electrical Installati...

Electrical Design Engineer £40,000 - £55,000 + Overtime + Pension + Benefits Bedford - Hybrid Working Available Ref: 21745 Electrical Design Engineer – The Role: * Conceptual, detailed design & development of machinery * Design of control systems such as variable speed drives,

Control Systems Engineer £40-55k + Profit Share + Pension Option for Funded PhD Bedfordshire Ref: 25208 Hands-on Controls Engineer immediately sought to join a small, highly technical engineering team developing advanced automation and optical systems. This is a unique opportunity to work on challenging projects where your ideas and problem-solving will directly impact delivery. Control Systems Engineer - The Role: Design, implement, and commission electrical and control systems for innovative engineering products Program PLC's and integrate with CNC and motion control systems Support build, testing, and commissioning of bespoke systems Contribute to technical project planning, documentation, and regulatory compliance Control Systems Engineer - The Person: Strong technical background in control systems for bespoke machinery automation Self-sufficient, practical, and hands-on – able to get things done independently Problem-solver with good initiative – not waiting for instructions Excited by working in a small, dynamic team and helping shape the future of the company Why this role? Work on stimulating, high-tech projects for aerospace, defence, and national programmes Join a small, close-knit team with opportunities for professional development Support to progress towards Chartered Engineer (CEng) status Engage with a highly connected and respected company in the eng...

Key Responsibilities & Duties: Carrying out electrical, pneumatic design Carrying out the validation of all designs to the current safety standards and requirements Carrying out design studies and reviews and preparation of specifications for special applications. Due to increased business and cont

Compressor Engineer Bedford Full time, permanent Monday - Friday: 8am 5pm 25 days holiday + BH, Private Medical Insurance, Pension Scheme Our Bedfordshire based client opened their doors in 1981 to provide local customers with high quality compressed air products and services. They work across a variety of industries, supplying a wide range of compressed air and gas generation equipment, together with a comprehensive after-sales service and repair capability. Overview: They are seeking a motivated, energetic and enthusiastic compressor engineer with mechanical and electrical skills who's ready to join a small, close-knit team who want to make a difference. Youll mostly work at their customers sites within a 30-mile radius of Bedford, with occasional repairs carried out in the Bedford workshop. You will report directly to the Service Manager who will allocate your daily and weekly schedule. Key Responsibilities • Maintain, repair, and ins...

Mechanical Maintenance Engineer This is a Mechanical Maintenance Engineer role where your hands-on ability actually matters. If you enjoy fault-finding, keeping production moving, and being relied upon, this Mechanical Maintenance Engineer opportunity is built for you. This Mechanical Maintenance Engineer role sits within a regulated pharmaceutical environment, supporting a multi-line production site operating a late shift. The focus of the role is hands-on engineering — responding to breakdowns, resolving mechanical faults, and ensuring production downtime is kept to an absolute minimum. The role is predominantly mechanical, with exposure to pneumatics and basic electrical fault finding, and offers structured onboarding, paid overtime, and long-term stability. This is a role for someone who has a ‘no job is too small’ mentality, enjoys being on the tools, problem-solving independently, and taking ownership of engineering issues as they arise. Job Responsibilities Responding to breakdowns across multiple production lines to minimise downtime Diagnosing and repairing mechanical faults including motors, bearings, shafts, rollers, and drives Carrying out reactive maintenance as the primary focus of the shift Completing planned preventative maintenance tasks where scheduled Fault finding on pneumatic systems Carrying out basic electrical fault finding including fuses, contactors, and drives ...

Trainee Maintenance Engineer 12pm to 8pm (2 Saturdays per month, day off in lieu) We are a Bedford based distributor with a leading presence in our industry. Due to continued growth, we are extending the Engineering team in our warehouse and recruiting for a junior/trainee maintenance engineer. The role will involve ensuring line efficiency and minimising machine down time, planned preventative maintenance of the machine ensuring its smooth operation at all times, provision of both mechanical and electrical knowledge to ensure any machine issues are dealt with promptly and fault finding diagnosing and repairing. We invite applications from aspiring engineering professionals who have possibly just completed their engineering qualifications at college and are looking for their first position...

JOB TITLE: Lead Air Conditioning Engineer / HVAC Supervisor SALARY: £40 - £48k + travel time paid @time & half + private healthcare + overtime, van (can be used for personal use) LOCATION: Bedford and surrounding COMPANY INFORMATION - Lead HVAC Engineer / Senior Air conditioning engineer • Reputable and well established company specialising in buildiung services xrnqpay including electrical, mechancial, air con Apply now, read the job details by scrolling down Double check you have the necessary skills before sending an application. Please click on the apply button to read the full job description

Introduction Saab in UK is growing rapidly, with over 500 colleagues across eight sites. We bring together Swedish heritage and British expertise to drive innovation in areas such as software engineering, underwater robotics, radars, AI, and armed forces training. Joining Saab in UK means contributing to the security and resilience of society while building a career with real scope for personal and professional growth. What you will be part of Explore a wealth of possibilities. Take on challenges, create smart inventions, and grow beyond. This is a place for curious minds, brave pioneers, and everyone in between. Together, we achieve the extraordinary, each bringing our unique perspectives. Your part matters. Saab is a leading defence and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 26,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Role: This role is part of our Saab Seaeye Business Unit in Fareham. The role will aim to provide Production Engineering support for the assembly and testing of remotely operated vehicle sub-systems and production processes. In addition, ensure appropriate production processes, equipment, and facilities are in place to safely and consistently manufacture products to meet cost, time, and quality requirements. Key Accountabilities and Responsibilities: * Attend SQCDP meetings and support a hands problem solving approach with Area Team Leader and Quality Engineering to achieve OTD and right first time objectives. * Standardise processes and procedures to ensure consistency, minimise variation, and improve cross-department collaboration. * Own, document and train others on manufacturing process and standards. * Assess compliance and adherence to safety/quality standards. * Maintain manufacturing BOMs & Routings. * Manage NPI transfer into production; develop, optimise, and implement factory floor layout. * Provide technical support for production and production control. * Analyse data to drive continuous improvement of processes and workflows. Skills & Experience: * Multi-disciplined Senior engineer with an electrical bias and experience in prototype wiring, testing and fault finding. * Background in low-volume, one-off engineered products and systems; ideal for Production, Project, or Delivery Engineers. * Strong knowledge of electrical and mechanical engineering, particularly relating to products such as rack equipment, power supplies and subsea pods with integrated PCBs and connection systems. (Familiarity with IPC/WHMA-A-620 Class 3 workmanship standards). * Minimum qualifications HNC/HND, Bachelor's degree or relevant experience preferably in Electrical, Mechanical, Engineering, Industrial Engineering, Manufacturing Engineering, or a related field. * Hands-on production support experience in assembly, testing, and quality control. * Relevant certifications (e.g., Lean Manufacturing, Six Sigma Green Belt) are a plus; familiarity with hydraulics is also beneficial. (Support and training is available for Working with Electrics, High Voltages, and Hydraulics). General Accountabilities and Responsibilities: * Use initiative to develop effective solutions to day-to-day challenges. * Maintain proficiency in relevant IT systems. * Act ethically and with integrity at all times. * Foster professional relationships and work cross-functionally to meet business objectives. * Perform other duties as assigned by management. * Maximise productivity through process improvements and enhanced quality control. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.

Job Description Bedford Salary - Negotiable DOE Monday - Friday 37 hours per week. Your new company: Based in Bedford, you will be joining a well-known and growing manufacturing business specialising in large-scale automated machinery manufacturing. Due to increased business and continuous growth, they are now recruiting for an experienced Electrical Design Engineer to join their design and automation team. The Electr... ZIPC1_UKTJ

Field Service Engineer - Pumps Location: Bedfordshire and surround areas Salary: Up to £42,000 basic salary + OT The Company A leading supplier who specialise in complete pump solutions, award winning company who help reduce environment are known for their technical expertise, rapid response and long-standing relationships. Industry expertise across commercial, retail and hospitality with sustainability and cost-saving solutions at the heart of what they do. Your Role In the role of a Field Service Engineer, you will be responsible for installing, repairing and maintaining various types of submersible and industrial pumps at customer site. can expect to work on clean water, wastewater, circulatory pumps, booster sets, submersible etc. Key Responsibilities: * Perform reactive and planned maintenance on pump systems at client sites * Diagnose faults and carry out mechanical and electrical repairs on submersible, booster, and vacuum pumps * Install new pump systems and ensure correct commissioning * Set up control panels and integrate systems with existing infrastructure * Deliver excellent customer service and maintain long-term relationships Your Background: * Background in the pumps industry is essential – submersible, industrial pumps and vacuum systems * Background working with water - e.g. clean water, wastewater, booster sets, circulating pumps * Experienced in troubleshooting, ...

Mobile Service Engineer (Pump Systems) Salary: £38,000-£47,000 per annum (Average OTE £50,000-£65,000) Location: Bedford, Bedfordshire Hours: Monday–Friday 40 hours per week | Day Shift with Flexible Start & Finish Times(Weekend work + Callout available at enhanced) Job Type: Full Time, Permanent A well-established engineering service provider is seeking a skilled Pump Service Engineer to support the installation, maintenance, and repair of pump systems across commercial & Industrial sites. This role suits an experienced engineer with strong knowledge of electrical/mechanical engineering or industrial pumping equipment. Key Responsibilities • Carry out on-site installation, servicing, and repair of various pump systems, including submersible, centrifugal, and booster units., • Perform diagnostic checks, identify faults, and deliver effective solutions., • Work closely with clients to understand operational needs and provide tailored technical advice., • Ensure all work meets required health, safety, and industry compliance standards., • Update job information accurately via PDA and complete associated documentation. Benefits • Overtime Paid at enhanced rate inclusive o...