Electrical engineer jobs in PeterboroughCreate job alerts

The Reliability Maintenance Engineering (RME) team at Amazon is fundamental to our operations – they’re the ones keeping vital machinery running at all times. As an RME Technician, you’ll maintain a wide range of equipment and workspaces while upholding Health and Safety best practices. You'll help to keep your colleagues safe and prevent machine downtime. Our RME Technicians boost the availability and quality of our equipment and work to enhance the operational environment too. Key job responsibilities • Proactive and preventative maintenance tasks on a wide range of site equipment, • Carry out reactive repairs and fault diagnosis in a live distribution warehouse, • Use the latest tools to maximise equipment effectiveness, • Uphold all health and safety policies and practices, • Support the development and progression of on-site apprentices, • Work on continuous improvement projects and roll out best practices across a range of EU sites A day in the life Our RME Technicians are based on-site, so they can respond quickly to any machinery issues. You’ll carry out a range of planned preventative maintenance to our sites’ equipment to make sure it’s working safely. As an RME Technician, you’ll also respond promptly to breakdowns, investigating, finding, and implementing solutions as quickly as possible. You’ll also make suggestions for long-term improvements. Working alongside senior colleagues, you’ll undertake day-to-day maintenance tasks and will liaise with contractors if you need external expertise. You’ll work on a range of shifts to make sure our sites are supported around the clock – allowing Amazon to deliver at the speed we’re known for. About the team Our Reliability Maintenance Engineering or RME team keep our equipment performing at its best. We're a technically minded team, made up of excellent team players and guided by experienced leaders. We work together to maintain, troubleshoot and repair equipment across our global network of fulfilment centres. Some of our people are leaders, who oversee the team as they work on exciting technology – some of which only exists at Amazon. From installing automated packaging systems to overseeing the general maintenance of a site to repairing key distribution equipment, our team handles most aspects of Amazon’s technical side. This includes keeping buildings legally compliant, so everyone is safe, and our sites are operating at maximum efficiency. There are lots of opportunities for progression, both within the RME team and more widely across Amazon. Everything we do focuses on reducing downtime in Amazon’s crucial operations sites, so customers get their orders on time. We often work during early or late hours to carry out maintenance with minimal disruption, including night shifts. If we spot a better way to do something, we have the skills and the opportunity to develop and introduce completely new processes or cutting-edge tech like Amazon Robotics and our Complex Item Sorter. • Served a full Engineering indentured apprenticeship and/or qualified to a minimum NVQ Level 3 or equivalent in a relevant Engineering subject, • Relevant experience as a qualified engineer, • Relevant experience working in mechanical and/or electrical maintenance, • Advanced proficiency in the local language verbally and in writing, • Experience in condition-based monitoring, • Experience working with print and apply machines, • Experience in fault-finding and maintaining conveyor or automation systems Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice (_) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit _ for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.

We are looking for a Highly skilled and proactive Loading BayEngineer to carry out both breakdown repairs (reactive maintenance) and Planned Preventative Maintenance (PPM) on loading bay equipment. This includes dock levellers, scissor lifts, and associated mechanical, electrical, and hydraulic systems. Key Responsibilities for aLoading Bay Engineer: • Attend customer sites to diagnose and repair faul... ZIPC1_UKTJ

Role: Electrical Maintenance Engineer Salary: £53,750 Shifts: 4 on 4 off days & nights (4 days / 4 nights) Location: Kirton Pension: Employer doubles employee's contribution up to 10% Are you an experienced Electrical Maintenance Engineer looking to join a heavy manufacturing company based in Kirton. You will be part of small team, assisting with all activities that help the site run as efficiently as... ZIPC1_UKTJ

ELECTRICAL MAINTENANCE ENGINEER Job Title: Electrical Maintenance Engineer Location: Bilsthorpe Salary: £55,000 - £55,500 Shift: 4 on 4 off (days and nights 12 hours) Job Role of the Electrical Maintenance Engineer A fantastic opportunity which is not to be missed by strong Electrical Maintenance Engineer has come to the forefront. This is going to be any engineer's dream to work in this state-of-the-ar... ZIPC1_UKTJ

Field Service Engineer - Compressed Air Systems - UK Wide - Based Commutable To Newark We are recruiting on behalf of our client for a Multi-Skilled Field Service Engineer to support customers across the UK. This is an excellent opportunity for a skilled engineer with a strong electrical and mechanical background looking for a varied field-based role with excellent earning potential and ongoing tra... ZIPC1_UKTJ

THE OPPORTUNITYAn exciting opportunity has arisen for an Electrical Design Engineer to join a well-established company, specialising in the design and supply of customer standard process control systems to the food and beverage industry. The company is conveniently located in Peterborough, where the Electrical Design Engineers role will be based. RESPONSIBILITIESThe Electrical Design Engineer will ... ZIPC1_UKTJ

Job Title: Senior Electrical Maintenance Engineer (PLC Fault Finding) Senior Electrical Maintenance Engineer (PLC Fault Finding) Term: Permanent, Full-Time ---------------------------------------- Working Hours • MondayThursday: 08:0016:00 (flexible start available), • Friday: Early finish (1pm), • Total: 37.5 hours per week Location: Diss, IP21 Salary: Up to £50,000 We are delighted to be working with a well-estab... ZIPC1_UKTJ

Electrical Maintenance Engineer - High-Speed FMCG Food Production Peterborough £57,000 plus benefits 2 & 3's 12 hours days & nights Are you an experienced Electrical Maintenance Engineer looking to work with cutting-edge technology in a fast-paced environment? Join a leading FMCG food processing company at the forefront of innovation, quality, and efficiency.This is your chance to be part of a forward... ZIPC1_UKTJ

Maintenance Engineer (Manufacturing / Nights) £46,000 - £47,000 + Night Shift Allowance + Overtime OTE 60k + Healthcare + 23 Days Holiday Peterborough Are you a Maintenance Engineer from a manufacturing background looking for an exciting new opportunity within a market leading company, working on a range of state-of-the-art machinery with tailored training on PLCs? In this nights-based role you will be working on a wide range of brand new and refurbished manufacturing machinery, both mechanically and electrically. This will include 3-phase motors, drives, gearboxes, pneumatics, and PLCs with training given if needed. Founded over 25 years ago, this manufacturer has risen to the top in their niche market and pride themselves on being the UK's number one in their field. With multiple sites across the UK, they have recently moved to this large new production facility and invested heavily into the machinery. This role would suit a Maintenance Engineer who is looking to work nights for a large, reputable company who will further their skill set with ongoing training on a range of equipment.The Role: • Planned and reactive maintenance on manufacturing machinery, • Working on 3-phase motors, drives, hydraulics, gearboxes, and PLCs, • Training given through shadowing and courses to fill in skill gaps, • Sunday to Thursday, 10pm - 6am, • Overtime paid at 1.5x The Person: • Maintenance Engineer, • Manufacturing background, • Electrical experience Reference Number: BBBH25693 Maintenance, Engineer, Engineering, Technician, Manufacturing, Electrical, Mechanical, Machinery, Shifts, Night, Nights, Shift, Holbeach, Peterborough, Huntingdon, Stamford, Market Deeping If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

Maintenance Engineer Salary: Up to £46,000 + Overtime Available Monday – Friday | No Nights | No Weekends Commutable from Peterborough, Spalding, Wisbech, March, Holbeach and surrounding areas Are you a Multi-Skilled Maintenance Engineer looking for a role that offers a genuine work-life balance? Looking for a Monday to Friday position with no nights, no weekend working, and the opportunity to work within a fast-paced manufacturing environment? We are currently recruiting for a Multi-Skilled Maintenance Engineer to join a well-established manufacturing site where engineering plays a key role in operational success. This is a fantastic opportunity to join a growing business that invests in its people, equipment, and continuous improvement projects. The Package: • Salary up to £46,000, • Overtime opportunities available, • Monday – Friday working pattern, • Strong work-life balance, • Long-term stability within an established manufacturing site, • Opportunities for training, development, and progression The Role: As a Maintenance Engineer, you’ll be responsible for supporting production through proactive and reactive maintenance activities while driving improvements across the site. Your responsibilities will include: • Carrying out planned preventative maintenance (PPM) across site equipment, • Diagnosing and resolving electrical and mechanical faults, • Assisting with machinery upgrades, installations, and engineering projects, • Driving continuous improvement activities across the site, • Working closely with production teams to ensure operational performance Machinery / Equipment You Could Be Working On: • Packaging equipment, • Conveyors, • Pumps and gearboxes, • Pneumatic and hydraulic systems, • Water treatment systems, • Production and processing machinery, • Plant services equipment What We’re Looking For: • Recognised Engineering Qualification, • Multi-Skilled Engineering background (Electrical or Mechanical bias considered), • Previous experience within manufacturing, FMCG, food manufacturing, packaging, or production environments, • Strong fault-finding ability across electrical and mechanical systems, • Experience carrying out planned and reactive maintenance, • Knowledge of hydraulics and pneumatics, • Continuous improvement mindset with a proactive approach Ready to put the shifts to bed and get a better work life balance – CLICK APPLY NOW

Job description: UK Field Service Engineer We are seeking highly motivated, skilled and experienced individuals to join our UK Corporate Account Field Service Team and work in a fast-paced, dynamic environment, to support our ever expanding business. This role will help to deliver the highest possible level of maintenance / service / engineering support and customer care. We are looking to hire engineers located in the south of England for regional based roles. The duties of the role will include but are not limited to the following; Responsibilities & Duties: • Carry out scheduled Preventative maintenance and servicing of materials handling equipment, • Fault diagnosis & repair of materials handling equipment, • Liaising with Combilift support functions, with regards to issues identified in the field, • Accurately complete service reports & job sheets via Combilift support systems, • Ensure accurate identification & timely ordering of parts via Combilift support systems, • Return of parts where appropriate through Combilift processes and procedures, • Carry out all repair and service work in line with relevant Service Level Agreements and Combilift standards ensuring the highest possible level of customer satisfaction, • Ensuring customer relationships are maintained through high standards of customer service, communication and personal presentation, • Travel as necessary, • Overtime where required, • Ensure all company and customer health and safety procedures are adhered to, • Ensure company vehicle is maintained and well presented at all times, • Van stock levels to be managed accurately, • Act as a Company Ambassador at all times ensuring the highest standards of presentation are met, • To visit the Combilift factory/HQ as required Working Hours: 40 hours per week Salary: Highly competitive compensation package in line with market, experience and skill set. Overtime opportunities. Contributary UK pension scheme. Person Specification: We are looking for electrical, hydraulic & mechanically biased engineers from all types of maintenance / service background specifically forklift, mobile plant, general automotive technicians, HGV, agricultural or ex forces military vehicle engineers. The ideal candidate will hold a clean driving license. They will also have experience of working in a customer facing environment and be used to working unsupervised. Qualifications / Skills: • Mechanical/Engineering/Hydraulic/Electrical knowledge and experience is required., • Knowledge of Combilift products is advantage but not essential. Product training will be given., • Good communication skills are essential., • Ability to work both, as an individually and as part of a team is essential., • Must be a quick learner and have a willingness to learn new skills., • Must be willing to work additional hours to complete job., • Occasional overnight stays are required., • Must be able to work well under pressure., • IT Skills are required., • Ability to do light welding is an advantage, but not necessary.

Data EngineerWho are Diligenta? Diligenta's vision is to be acknowledged as Best-in-class Platform-based Life and Pensions Administration Service provider. Customer service is at the heart of everything we do, and our aim is to transform our clients' operations. A business that has been described as ‘home’ by existing employees, we drive a culture that is founded on positive change and development.Summary of the role: As a Data Engineer you will be responsible for designing, developing and delivering solutions to Load, optimise and transform Data within our environment and the relevant infrastructure to support them. The Data Engineer will provision, configure and implement Azure infrastructure consisting of SQL instances, and other Fabric components as required to support the Data needs of Diligenta. You will be a key part of designing and building out our Data infrastructure that will help to drive Data insights, data use and value across the business.Benefits: • 33 days including Bank Holidays, • Eligibility for an annual discretionary bonus scheme, • Personal and career development opportunities to progress your aspirations within the company as well as through our global parent company (Tata Consultancy Services), • Access to Perks at Work (an online discounted shopping platform) saving you money on a wide range of goods and services, including your weekly food shop, holidays and electrical goods., • Cycle to Work Scheme & Interest-free Season Ticket loans., • A companywide Wellbeing programme, including an Employee Assistance Programme and other benefits/resources to support your mental/physical and financial wellbeing., • A comprehensive set of Moments that Matter policies, such as Carer’s Leave, Foster Leave and Retirement Leave, • A contributory company pension scheme where we match your contributions up to 6%, Group Life Assurance ('Death in Service') & Group Income ProtectionWhat you’ll be doing:, • Help build, implement and contribute to best practices within the engineering environment such as naming conventions, coding standards and design briefs., • Work to promote, implement and maintain clear code and documentation for all projects., • Maintain Wiki entries for engineering, development and product environments., • Use CICD frameworks to iterate through and optimise solutions., • Use source control solutions to maintain our code base (GIT) maintaining code branches and release versions., • Work to deliver products and solutions utilising agile methodologies., • Help build and operate a content delivery network for solution delivery and maintenance., • Create solutions that comply with Data governance frameworks and data management processes and policies., • Be an active part of product and change refinement processes to help define stories, features, and contribute development estimates., • Be a key part of designing and building out our Fabric infrastructure that will help to drive Data insights, data use and value across the business.What we’re looking for:, • Prior experience in a similar Data Engineering role in either a software or data delivery environment., • Educated up to a degree level or equivalent experience., • Understanding of data governance concepts., • Strong analytical skills., • Good stakeholder management skills., • Familiar with data privacy regulations such as GDPR., • Proven experience designing and implementing ETL/ELT solutions., • Knowledge of relational and non-relational data management systems., • Working with big data platforms, tools and environments., • CICD tools and processes., • GIT source safe., • Azure Data factory., • SQL, SSIS., • Working in an Agile delivery environment., • MS Fabric environment., • RDBMS platforms., • SQL coding., • Scrum, kanban (Desirable), • Azure DevOps (Desirable), • Jira (Desirable), • Purview, Colibra, Erwin or similar (Desirable) If you need any help or adjustments during the recruitment process, please let us know. Ready to take the next step in your career? Apply today and become part of our innovative team!

Peterborough Salary - Negotiable DOE Monday - Friday days. Your new role: Based in Peterborough, you will be joining the UK's leading water/ clean water equipment and processing manufacturing business, who now, due to continued growth, are looking for a Multi Skilled Maintenance engineer to join their engineering team.Offering a range of industry-leading benefits, including private healthcare, a generous holiday allowance and other perks, this is an excellent time to join this fast-expanding company in a hands-on maintenance role! Key Responsibilities & Duties: • Perform planned, preventative and reactive maintenance on machinery and equipment across the plant, • Mechanical & Electrical fault-finding, • Fulfilment of facility maintenance tasks, • Installation of new equipment and machinery, • Work to HSE standards set at the site., • Complete testing of electrical circuits and panels This is just a summed-up list, and other duties will be required. Skills & Experience required: • Previous experience in a similar Mechanical and/or electrical maintenance role, • Electrical qualifications (NVQ3 in electrical-based units, City and Guilds Level 3 in electrical installations or equivalent), • Ability to fault find both mechanically and electrically, • Experience in a similar fast-paced factory/plant environment, • Qualifications such as 18th edition would be highly desirable., • Able to work individually and/or within a team environment What you need to do now if you're interested in this role: Click 'apply now' to forward an up-to-date copy of your CV or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us now on for a confidential discussion about your career. Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

JG285 – Forklift EngineerLocation: Newark-on-TrentSalary: £30,000 - £37,500 + Overtime + BenefitsOverview:First Military Recruitment are currently seeking a Forklift Engineer on behalf of one of our clients.The successful candidate will be responsible for carrying out routine maintenance and repairs to long/short term machines and customers owned equipment. Ensuring best practice with quality and professionalism are met at all times and to maintain customer satisfaction.Our client strongly encourages applications from ex-military personnel however, all candidates will be considered.Duties and Responsibilities: • Servicing and repair of forklift trucks and other lifting equipment., • Carrying out routine maintenance., • Checking oil and fuel levels., • Checking all related hoses and connections., • Steering and brake checks., • Basic electrical checks – brake lights etc., • Liaising with customers regarding their individual requirements., • Submit accurate parts requisition information to Head Office., • Acting as the face of the company and therefore acting as a brand ambassador. Skills and Qualifications: • A good mechanical engineering background is essential., • Customer focused., • Ability to work as part of a team or on an individual basis where required., • Excellent time management skills, • Excellent communication skills – both verbal and written., • Experience with forklift trucks, military, agricultural or plant equipment is highly desirable., • Full UK driving licence. Location: Newark-on-TrentSalary: £30,000 - £37,500 + Overtime + Benefits

Electrical Installation Engineer We are currently seeking a hardworking and resourceful Electrical Installation Engineer to join our dynamic team of highly skilled Engineers. The role requires a self-motivated, practical problem solver with good communication skills. A key activity for this role will be to survey, install, commission and support site based control systems and equipment for one of our key clients. Predominantly electrical biased but there will be some elements of PLC programming (training will be provided). You could be working alone but other times with another engineer or as part of a team. The candidate will be responsible for ensuring work is completed to the highest standard within agreed deadlines. Whilst the majority of the work will be within standard working hours this operational role requires you to be flexible and will involve extensive travel to sites (approx. max of 3 hours away). Some time away from home is to be expected but it is not planned to exceed 20% of the working week. Hotels will be provided for any commute times over 1.5 hours. Full-time position (08:30-17:15 Monday to Thursday and 08:30-16:00 on Fridays) What we are looking for: • Electrical qualifications C&G, BTEC, NVQ3, ONC or HNC/HND, 18th edition required., • ECS Gold card holder, • Previous experience in a service & support, electrical installation or maintenance role., • Electrical design including EPlan, AutoCAD or equivalent would be advantageous., • Control Panel design, manufacture or electrical installation skills., • Experience of equipment installation and commissioning such as PLC’s What we require from you: • A minimum of 2 years of practical experience, • Pervious solid understanding of electrical diagrams for control panel wiring or electrical installation., • Level 3 Electrical Installation (2365), • Level 3 Requirements for Electrical Installations (BS7671:2018), • Good verbal and written communication skills, • Clean UK Driving License, • Must be eligible to work in the UK What you will get in return • Auto enrolment pension scheme (including Salary Sacrifice/Exchange for Pension Payments if desired), • 25 days holiday (rising to 30 days after 5 years service), • Private Health Scheme (after 1 year service), • Death in Service Plan (after 5 years service), • Access to our Wellbeing programme operated through COGG (, • Access to our Training Hub (various training courses available), • Free parking at all our offices (Subject to availability & any company parking policies or parking rotas that may be in effect), • Access to company vans or pool cars (company car scheme also available), • Access to Perkbox ( This gives employees access to discounted shopping, eating out, cinema and even holidays, • Free social events, team building days and Christmas party weekend break (partners included)., • TIL / Overtime and expenses scheme, • Adsyst hold key worker status Our company At Adsyst Automation Ltd we understand that our continued success is down to our dedicated team, therefore, we invest time and effort in each individual; training and assisting with their personal and professional development, encouraging their strengths while offering a good work/ life balance. Adsyst Automation Ltd has been providing complex Control Systems for Process Control, Automation and Telemetry to customers worldwide for over 35 years. We approach each project with a fresh outlook and use our knowledge and partnerships to stay a step ahead of the competition, offering the most advanced, innovative and cost-effective solutions. At Adsyst Automation Ltd, we embrace diversity and actively seek individuals with unique perspectives to join our team. Our goal is to create a sustainable future by fostering a diverse environment where everyone can thrive. We value inclusion and are committed to providing equal opportunities for all, regardless of race, religion, gender, or background. Join us to contribute to our vibrant culture and make a difference! Other positions are available in this office, as well as our other offices within the UK. Please see our website for more information at:

MULTI-SKILLED MAINTENANCE ENGINEER Job Title: Multi Skilled Maintenance Engineer Location: Peterborough Salary: £55,000 (OTE £62,000+) Shift: Earlies, Leates & Nights Job Role of the Multi Skilled Maintenance Engineer A strong opportunity has become available for a Multi Skilled Maintenance Engineer to join a respected, industry-leading manufacturing business with a reputation for excellence. Engineers here benefit from working for a company recognised for quality and operational standards. You will be responsible for both electrical and mechanical maintenance, responding to breakdowns, completing planned preventative maintenance, and supporting continuous improvement initiatives across site machinery. The site and has seen significant investment into the machinery and production over the last couple of years. This site is highly automated with the most up to date equipment and operating systems. This is a great opportunity for engineer who is looking for continued development and opportunities to work on market leading equipment. Sector - Factory Maintenance Non-Negotiable Requirements of the Multi Skilled Maintenance Engineer • Multi-skilled maintenance experience within an industrial manufacturing environment., • Minimum Level 3 engineering qualifications, • Electrical and mechanical fault-finding experience Desirable Requirements for the Multi Skilled Maintenance Engineer • Previous experience working as a Maintenance Engineer in the UK., • Experience with working on PLC's, ideally being able to fault find using inputs and outputs, • Hands on experience with pre-planned, reactive and breakdown maintenance in fast paced industrial factory. The Multi Skilled Maintenance Engineer will benefit from: • Working for a recognised market-leading business., • Training and development opportunities for engineers., • Competitive pension If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. For further details contact Antony Edwards at Pioneer Selection As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further details.

Mechanical Technician (Workshop Engineer/Forklifts/Automotive)Newark, Nottinghamshire£37,000 - £42,000 + 25 Days Holiday + Bank Holidays + 6% Employer/4% Employee Pension + Life Assurance + Uniform + Parking + Specialist Tooling + Training + Career Progression + CanteenTuesday to Saturday 8am to 4.30pmMechanical Technician (Engineer) role available in a highly successful and international manufacturer of forklift trucks. You’ll enjoy great benefits associated with a world leading company including training on their product range. The role will be suitable for engineers from any kind of plant, forklifts, HGV, agricultural or similar equipment. Automotive technicians/motor trade applicants will also be suitable as full training will be given. You need to demonstrate mechanical service and repair skills on vehicles or plant equipment. You’ll form part of a highly skilled team of 4, doing mechanical and electrical service and repair of forklifts. You’ll order any spares when needed and communicate progress to the Workshop Manager. The role is based at a client’s site in Newark.The Mechanical Technician role in brief:• Carry out service and repair work on workshop and service basis on a range of used forklift trucks.• Order parts The Person Required:• Experience of working on vehicles, HGV's, forklifts, Cars, plant machinery etc.• Ideally hold a level 3 or equivalent• IT literate

The client specialise in the design and supply of customer standard process control systems to the food industry. We currently have vacancies for talented, highly motivated individuals who are looking for opportunities to develop their personal and professional capabilities in this exciting, diverse and fast moving field. Electrician Location: Peterborough, UK Are you a skilled electrician with a desire to lead? Join our team as an Electrician building and testing Custom Control Panels in Peterborough! Supporting the Production Manager, you'll be directly involved in panel build, testing and on site retrofits and modifications. Main Tasks & Duties: Panel Building and Testing (based in Workshop in Peterborough) • Assembly of mild and stainless steel control panel enclosures, • Gear plate layout and assembly of components, • Panel wiring up to 415VAC including 3-phase, flexibar wiring and point-to-point panel wiring from the schematics, • Conduct pre-delivery electrical panel testing, fault finding, rectification & verification On-Site Electrical Modifications (Requires Travel UK and Abroad) • Panel retrofits & modifications, • On-site electrical testing and fault finding, • Provide electrical support for IO test and commissioning Candidate Profile • Proficient in English. • Electrical technical qualifications NVQ Level 3 in Electrical Installation/Maintenance or a BTEC Level 3 Diploma in Electrical/Electronic Engineering ideally obtained during a formal apprenticeship or 1 year of relevant experience., • Experience in panel building and site modifications., • Desire to lead a small team., • Proficient with Microsoft Office., • Knowledge of current electrical regulations and safety standards., • Familiarity with drives, PLCs, and control gear., • Flexible, self-motivated, and a team player., • Excellent written and verbal communication skills., • Valid driving licence and willingness to travel within the UK and internationally. What We Offer Join an international, successful company with sustainable prospects for the future. Benefit from exciting development and training opportunities. Competitive salary package with comprehensive benefits, including: • Overtime, bonus & company pension, • 25 days holiday plus Bank Holidays, • Private medical insurance

MS683 - Multi-Skilled Engineer Location: NewarkSalary: £50,275 per annumOverview: First Military Recruitment are currently seeking a proactive and highly skilled Multi-Skilled Engineer on behalf of one of our clients. In this pivotal role, you will support the smooth and efficient operation of the client's hatchery facility, ensuring incubators and associated equipment are maintained to the highest standards. You will play a key part in maximising equipment reliability, minimising downtime, and contributing to the overall performance and productivity of the hatchery. Hours: 4 on 4 off - 0600-1800 / days / 2 nights / 4 offOur client encourages applications from ex-military personnel however all candidates will be given due consideration.Duties and Responsibilities: • Ensure the reliable operation of all incubators, hatchers, and ancillary hatchery equipment., • Carry out planned preventative maintenance (PPM) tasks and respond to breakdowns promptly., • Investigate faults as soon as they are identified and implement timely corrective actions., • Work closely with the Maintenance Manager to improve equipment reliability and performance., • Maintain accurate maintenance records and contribute to continuous improvement initiatives., • Support compliance with health, safety, welfare, and biosecurity standards across the hatchery., • Assist with engineering projects, upgrades, and equipment installations when required. Skills and Qualifications: • Full UK Driving Licence., • Recognised Mechanical and/or Electrical qualification., • Strong organisational skills., • Responsible, proactive attitude., • High attention to detail., • Computer literate., • Previous hatchery maintenance experience (desirable).

Join Our Team as an Electrical Breakdown Engineer! Driving License Required Are you a problem-solver with a passion for engineering? Do you thrive in dynamic environments, tackling challenges head-on? If so, we have an exciting opportunity for you to shine as a Field based Breakdown Engineer. Our client prides themselves on delivering top notch engineering solutions that make a difference. Our team is dedicated, innovative, and always eager to tackle the next big challenge. They are expanding their business and looking for someone like you to join the team. What You'll Do: As a Breakdown Engineer, you will be at the forefront of our operations, ensuring that the machinery runs smoothly and efficiently. Your responsibilities will include: Diagnosing and resolving breakdown issues swiftly to minimise downtime. Conducting regular maintenance checks to prevent potential failures. Collaborating with team members to implement effective solutions. Keeping detailed records of repairs and maintenance activities. Training and mentoring junior engineers to develop their skills. What We're Looking For: We're seeking someone with a positive attitude and a knack for troubleshooting and electrical qualifications or working towards them. Here's what you should bring to the table: Proven experience in a breakdown engineering role or similar. Strong mechanical and electrical troubleshooting skills. Excellent communication and teamwork abilities. A proactive approach to problem solving. Relevant qualifications in engineering or a related field. What's on offer: Competitive Salary: We offer a salary that reflects your skills and experience starting at £45,000.00 up to £50,000.00 basic plus expenses OTE £65,000.00. Career Growth: Opportunities for professional development and advancement. Work Life Balance: Enjoy a healthy work life balance with flexible working hours. Team Spirit: Join a friendly and enthusiastic team that values collaboration and innovation. Company Culture: Be part of a positive workplace where your contributions are recognised and celebrated! Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.

Futures are working with a leading manufacture of medical devices in their search for an Service Engineer. You will offer support customers across the South of England, carrying out installation, commissioning, maintenance, and fault-finding activities on specialist electrical equipment. You will be working in a clean environment, predominately in hospitals and medical centres. This is an excellent opportunity for an experience Service Engineer to join a well-established business offering a fully expensed company vehicle, fuel card, paid door-to-door travel, premium overtime rates, and ongoing training and development. The work is varied, well planned, and typically carried out within clean, professional environments including healthcare facilities and commercial sites. Service Engineer - Responsibilities • Install, commission, and maintain a range of specialist electrical equipment., • Carry out fault diagnosis, repair, and servicing activities at customer sites., • Undertake electrical testing and commissioning within live environments., • Conduct site surveys and support installation planning activities., • Complete planned preventative maintenance and reactive service visits., • Produce accurate service reports and technical documentation. Service Engineer - Skills & Experience • NVQ Level 3 or equivalent in Electrical Installation, Electrical Maintenance, or a related discipline., • 17th or 18th Edition qualified., • Previous experience as a Field Service Engineer, Service Engineer, Installation Engineer, Commissioning Engineer, or Maintenance Engineer., • Strong electrical fault-finding and diagnostic skills., • Comfortable travelling regularly throughout the South of England., • Full UK driving licence. Electrical Field Service Engineer | Field Service Engineer | Electrical Engineer | Installation Engineer | Commissioning Engineer | Maintenance Engineer | Electrical Maintenance | Fault Finding | 18th Edition If this role appeals, please apply now!

Fuel your future with AO and earn up to £2,000 in performance bonuses! We’re all about balance — enjoy a shift pattern that fits your lifestyle, giving you the freedom to work in a way that works for you. As one of our Gas Engineers, you’ll keep full control of your Gas Safe card, while enjoying a reliable income you can count on. • Salary: £39,000 - £42,000 per annum, • Shift Pattern: 4 on 4 off / 6am- 6pm, • Location: Broadway Business Park, Yaxley, PE7 3EN Here’s what you can expect to be doing as a Gas Installations Engineer: As a Gas Engineer at AO, you’ll team up with one of our drivers to visit customers’ homes and install gas appliances and electrical products. No repairs—just safe, high-quality installs and brilliant customer service, every time. A Few Things About You: Essential • Full UK manual driving licence with no more than 6 points, • CCN1 & CKR1, • To be over the age of 21 for insurance purposes, • At least 1 year of experience within gas installations Desirable • Some experience of installation of electrical appliances would be ideal but we'll train you to be electrically competent. Our Benefits: As a Gas Installations Engineer, you will gain: • A 4 on 4 off shift pattern and 24 days holiday, you will work less than half a year., • On-call support from our technical team and Installation Managers, • Fantastic training facilities with ongoing learning opportunities, • Healthcare Cashback Scheme, • Competitive pension Scheme, • Gain exclusive ticket access to AO Arena, Sales Sharks, and Manchester Thunder. To see all our benefits and perks, visit our AO Benefits page. Click 'Apply' now to join our family and find out more about the Gas Installations Engineer role.

Annual salary: up to £39,809.07 Gas Engineer Location: Peterborough Salary: Up to £39,809.07 per annum plus company vehicle and fuel card Contract Type: Full time – Permanent, 42.5hrs per week, Monday to Friday This role offers excellent earning potential, with out-of-hours call-outs available in the evenings and at weekends, paid at £35 per call-out. About the Role: We’re looking for a skilled and safety-conscious Gas Engineer to join our team in Peterborough delivering high-quality gas servicing, repairs, and installations across our clients’ housing stock. Your role will be vital in ensuring that all gas appliances and systems are safe, compliant, and fit for continued use. You’ll carry out a range of domestic gas works including boiler diagnostics, repairs, servicing, and installations. Accuracy, attention to detail, and a commitment to safety are essential, as your work directly impacts the wellbeing of residents, staff, and the wider public. You’ll be expected to work independently and as part of a team, maintaining high standards of customer service and compliance at all times. Key Responsibilities: Carry out servicing, repairs, and installations of domestic gas appliances including boilers, cookers, and fires Diagnose faults and complete remedial works efficiently and safely Perform landlord gas safety inspections and issue certificates (CP12s) Ensure all work complies with current gas regulations and internal procedures Respond to emergency call-outs and urgent repairs when required Record all work completed using handheld devices or job management systems Liaise with tenants, housing officers, and internal teams to ensure clear communication Maintain van stock levels and order materials as needed Identify and report any safeguarding concerns or property hazards Work collaboratively with other trades to complete multi-skill jobs Participate in toolbox talks, training sessions, and safety briefings Ensure PPE is worn and health & safety procedures are followed at all times Support apprentices or junior engineers when required Key Criteria Qualified to City & Guilds or NVQ Level 3 in Gas Installation and Maintenance Hold valid ACS certification (e.g. CCN1, CENWAT, CKR1, HTR1) Experience in domestic boiler servicing, fault diagnosis, and installation Good understanding of electrical safe isolation and basic wiring principles Knowledge of current gas safety legislation and compliance standards Experience working in social housing or local authority environments (preferred) Excellent communication skills with a customer-focused approach Ability to work independently and as part of a team Comfortable using handheld devices or digital job management systems Strong attention to detail and commitment to safe working practices Flexible and willing to travel across properties and attend out-of-hours callouts Full UK driving licence Benefits we can offer you: 25 days annual leave plus bank holidays Annual Mears Fun Day - Our annual Fun Day is organised as a massive thank you from the Executive team for all the hard work! Volunteering Leave - Mears supports employees to undertake paid volunteering in the community, in support of our social value commitment. Staff perks with Mears Rewards - discounts of up to 10% weekly groceries, holidays, eye test vouchers, Share save scheme, plus much more Family friendly policies Company Vehicle and Fuel Card Access to EAP Counselling sessions All our roles require candidates to have the entitlement to work within the UK, Mears does not currently offer visa sponsorship. To drive a Mears vehicle, you must be aged over 21 have held your licence over 3 months and have less than 9 points. Candidates should be aware that all our roles are subject to relevant Background, Identity & Security checks before commencement of employment. Required Qualifications: CCN1 Core Domestic Gas Safety - Skills Training Agency, CENWAT Central Heating Boilers & Water Heaters - LCL Awards, CKR1 Domestic Cooking Appliances - LCL Awards Apply below or to discuss your application further; contact: Francesca Swan () If you need any help with your application process, we are here to support you. We will be accessible every step of the way. At Mears Group, we are committed to fostering a diverse and inclusive environment where everyone can thrive, we are a Disability Confident employer, valuing individuality and ensuring equal opportunities for all. We proudly support the Armed Forces Covenant and are honoured to have achieved the Gold Award in the Defence Employer Recognition Scheme (ERS) to coincide with this, we hold an Endorser Award for the Career Transition Partnership, recognising our commitment to veterans transitioning into civilian careers. In our continued effort to promote social mobility, we invite applicants to voluntarily share their background information during the application stages to help us better understand the diverse experiences of our candidates. This is to ensure we are committed to improving social mobility. We use the Social Mobility Index to assess and enhance opportunities for individuals from diverse backgrounds. These questions are optional and will not impact your ability to apply.

Multi-Skilled Maintenance Engineer Location: Peterborough Salary: £50,000 to £53,000 + Pension + Overtime Sunday to Thursday - Nights, 10pm-6am Reference: Jo7187/AD The Company My client is one of Europe’s leading manufacturers within its field of premium glass process engineering and associated products supplying into a wide variety of industries. The company is a well established producer to the global markets, having plants in the UK, Europe, Asia, and America. The Knottingley site is looking once again to expand due to further investment, within this globally secure organisation. Key Skills · Apprentice Trained Engineer in Electrical or Mechanical Engineering · Experience of PLC systems & Automated machinery · Understanding of PPM systems The Role The successful candidate will be responsible for all aspects of day-to-day engineering and maintenance activities ensuring work is carried out to the highest standards and maximising machine efficiencies. The ideal candidate will come from an electrical or mechanical engineering background and should be able to work on their own initiative, be a time served engineer with electrical bias (but some multi-skilled knowledge) and have process machinery manufacturing experience. If you have worked on PPM systems, it would be advantageous. Electrically you will be able to fault find on single and three-phase systems, servo motors and AC motors, sensors, and various control systems. There will be an element of electrical installation as required, typically lighting and small power. Knowledge of plc electronics desired. Mechanically you will be able to work on drive train systems, rollers, gearboxes, shafts, pneumatics, and some hydraulics. If you are interested in this role, please send a copy of your current CV using the details provided, interviews will be held locally, and the company is looking to recruit this role as soon as possible. ETS Consulting Ltd – Recruitment specialists with specific areas of expertise in the Manufacturing, Technical, Engineering and Sales markets. ETS Consulting Limited act as an employment business and employment agency and are registered in England and Wales as ETS Consulting Limited, registered no 06164846. Registered office address 7 Stamford Square, Ashton Under Lyne, Lancashire, United Kingdom, OL6 6QU. If one of our consultants contacts you in relation to this role, please be aware that as part of our registration process you will be required to provide ETS Consulting with proof of your identity along with proof of your eligibility to work in the United Kingdom.

Field Service Vehicle Engineer - Peterborugh Day shifts – Monday to Friday Are you ready to go on the road and take your technical skills to a dedicated network of customer sites? If so, then this could be the role for you? We are looking for a self motivated and independent Vehicle Engineer who can travel to our clients various workshops in a designated area providing: Your day starts when you start your vehicle! Are you ready to go on the road and take your technical skills to a dedicated network of customer sites? If so, then this could be the role for you? In this role, no 2 days will ever be the same and the products that you work on will be diverse. HGV’s, Ground Support GSE, RORO (Roll on Roll Off), Fire and rescue, Tractors and Tugs plus other bespoke operating platforms. We are looking for a self motivated and independent HGV Vehicle Engineer who can travel to our clients various workshops in a designated area providing: • Callouts, • Preventative Maintenance, • Emergency Breakdowns, • Pre-arranged servicing at rural sites, • MOT Preparation, • Engine work and diagnostic investigations, • Correction of running defects, • Chassis and fabrication work, • Hydraulics and pneumatics, • Improvement of vehicle standards, • Electrical and wiring inspections and corrections Your industry is moving faster with every day that passes. Electric & Hydrogen Vehicles are now part of the present and you will be trained on the newest products and repair techniques when required. A Class2 Licence would be beneficial. You will need to be a fully qualified Commercial Vehicle Technician or have been accredited via an authorised Apprenticeship. Benefits – you will start with 24 days annual holiday (plus bank holidays) per annum, you will also be enrolled in the pension scheme and qualify for the private healthcare scheme. If this role isn’t for you but you are looking for a move, then please get in touch. Kautec Recruitment is a fast growing automotive people business that recruits the right way. HGV, heavy goods vehicle, commercial vehicle, RCV, refuse collection vehicle, tipper, sweeper, gritter, mechanic, vehicle engineer, vehicle technician, fitter, workshop. A problem solver with a can-do mindset Abiding by health and safety rules You will be travelling within an area of North London and Essex We require an excellent understanding of vehicle technology, and be capable of following the repair process from fault analysis to completion The personal qualities that my client are looking for are simple, these are the ethos of an exemplary team member that can represent the company in the best way possible; Reliable and punctual Enthusiastic, proactive and an innovative thinker

Multiskilled Maintenance Engineer Gen Phoenix is revolutionizing sustainable manufacturing by transforming leather waste into premium materials that rival originals. We've already saved 10,000+ tonnes of waste from landfill, partnering with global brands like Coach, Dr. Martens, and Daimler from our £70m facility powered by 100% renewable energy. Join our innovative engineering team and apply your skills to support our mission of making material circularity possible at an epic scale. Role Highlights • No weekends or bank holidays required, • 3-shift rotation (6am-2pm, 2pm-10pm, 10pm-6am), • 5 weeks holiday + bank holidays, • Overtime paid at 1.5x rate, • State of the art equipment What You'll Need • Level 3 apprenticeship in Electrical or Mechanical Engineering, • Cross-disciplinary skills in both electrical and mechanical systems, • Strong fault-finding abilities and continuous improvement mindset, • Health and safety consciousness, • Willingness to learn in our innovative manufacturing environment Package details • Life assurance : base salary x3, • Bupa health cash plan, • Employer pension contributions : 4% Location: Peterborough, PE7 3HH, UK Apply now to join the company transforming leather waste into premium sustainable materials used by global brands like Coach and Dr. Martens.

Primary Objective MSP Limited is seeking a skilled and motivated Senior Electrical Engineer (C&I) to develop robust and reliable BESS control and EMS functionality. The candidate must will be responsible for a small but specialist team of Software and Embedded Engineers, developing complex controls for system level and EMS. Key Responsibilities • Lead a mixed team of controls engineers and software developers, • Assess and appraise existing control strategies, • Create new control strategies based on a project/product brief, • Integration of multiple devices with differing protocols, • Focus on safety systems and reliability, • Identify and implement security measures for internal and external networks, • Mange complex client networks, • Ensure new and existing designs comply with relevant standards, safety protocols and compliance requirements, • Provide expert guidance and recommendations on C&I related topics, • Identify and appraise new and existing components for suitability, durability and cost, • Provide support and training to members within the controls and software team, • Prepare and own technical documentation to support the control designs, • Lead projects from pre-sale to handover, • Identify and perform test procedures to validate designs, • Troubleshoot issues and faults in the factory and in the field, • Draw on previous experience to provide solutions to design issues Relationships Internal Stakeholders • Control / Software Engineers – Coordinate on implementing control algorithms (e.g., PID) and integrating them into embedded systems., • Test Engineers – Partner to develop and execute test plans, especially for high-power systems and HIL simulations. Project Managers – Provide technical updates, contribute to planning, and ensure alignment with project timelines. External Stakeholders Clients – Provide technical updates, contribute to planning, and ensure alignment with project timelines and ensure product suitability Person Specification To be successful in this role the Electrical Engineer (Design) must posses • Attention to detail with ability to self-assess, • Excellent problem-solving and analytical skills, • Strong communication and interpersonal abilities, • Self-motivated and capable of working independently, • Safety-conscious with high attention to detail, • Flexible and adaptable to changing environments and schedules, • Be adaptable and flexible in your approach to work, • DBS check to be completed prior to start date, • A legal right to work in the UK Education, Qualification and Certification Essential Qualifications & Experience • Degree or HNC/D in Electrical Engineering or related field or Formal training with PLC, or time-served, • Minimum 5 years of experience in Controls and Instrumentation, • Proficient with:, • PLC Complex, • Code Embedded Software Communications CAN, MODBUS, • SCADA Hardware Automation, • Strong understanding of hybrid power systems, inverters, and energy storage technologies., • Competent with knowledge on electrical characteristics and concepts:, • AC / DC Networks, • kVA/ kW, • Proficient in reading electrical schematics and using diagnostic tools, • Prior experience with Energy Management Systems Valid driver’s license and willingness to travel Desirable Skills: • Familiarity with renewable energy systems and grid-tied configurations., • Prior experience with BMS, PCS/Inverter systems, VFD

Job Description: MSP Limited is looking for a skilled and motivated Electrical Engineer (Test) to join our growing team. This exciting role will focus on the testing of high-powered battery systems and driving productivity within our test operations, including Factory Acceptance Testing (FAT) and microgrid environments. About the Role As an Electrical Engineer (Test), you will play a key role in delivering high-quality system testing, supporting R&D projects, and ensuring industry-leading safety and performance standards. You will take ownership of the test facilities while working collaboratively across multiple teams. Key Responsibilities • Manage and coordinate testing schedules to meet delivery deadlines, • Liaise with Project Management, Engineering, and Production teams on timelines and changes, • Maintain accurate testing records, documentation, and data, • Take ownership of the Factory Acceptance Test (FAT) and Microgrid facility, • System build and breakdown, • Test bay management, • Promote and enforce safety procedures, including creating RAMS and Safe Systems of Work, • Support and participate in R&D testing and development, • Conduct Factory Acceptance Tests and assist in product validation, • Deliver training to customers and internal teams, • Continuously review and improve testing procedures and documentation, • Provide technical support (remote and on-site), • Identify and escalate risks via Early Warning Notifications (e.g. delays, faults, design changes), • Maintain up-to-date technical knowledge (equipment, software, industry trends), • Support the upkeep of the facility’s electrical systems (within competence) Key Relationships You will collaborate closely with: • Project Managers – providing updates, insights, and planning support, • Production Team – receiving systems and validating handover documentation, • Control & Software Engineers – replicating system behaviours and control strategies in testing About You We are looking for someone who is: • Detail-oriented with strong self-assessment skills, • A proactive problem-solver with analytical thinking, • An excellent communicator with strong interpersonal skills, • Self-motivated and able to work independently, • Highly safety-conscious, • Flexible and adaptable in a fast-changing environment, • Eligible to work in the UK Qualifications & Experience Essential: • Degree or HNC/HND in Electrical Engineering (or related discipline), or, • Qualified Electrician with relevant certification (e.g. C&G 2391 or equivalent), • Strong experience in electrical testing, • Knowledge of renewable or distributed energy systems, • Understanding of:, • AC/DC systems, • Power factor, kVA/kW, • Harmonics, • Ability to read electrical schematics and use diagnostic tools Desirable: • Passion for renewable energy, • Experience with microgrid systems, • Familiarity with DNOs and utility companies, • Hands-on experience with installation and commissioning, • Knowledge of PLCs, SCADA systems, and remote monitoring platforms Why Join MSP Limited? • Be part of an innovative and growing organisation, • Work on cutting-edge battery and microgrid systems, • Opportunities for professional development and training, • Supportive and collaborative team environment

THE OPPORTUNITYAn exciting opportunity has arisen for an Electrical Design Engineer to join a well-established company, specialising in the design and supply of customer standard process control systems to the food and beverage industry. The company is conveniently located in Peterborough, where the Electrical Design Engineers role will be based. RESPONSIBILITIESThe Electrical Design Engineer will be responsible for; • Design of MCC Panels (motor circuits, safety circuits, PLC equipment, layouts)., • Produce I/O configuration and I/O lists, material specifications and bills of material., • Produce cable lists / sizing calculations / electrical test sheets / single line diagrams., • Design cable routes, calculate containment size and update building layout drawings., • Writing Risk Assessments and Method Statements / CDM regulations., • Modifications to hardware and panels on site (24VDC, 230VAC, 415VAC)., • Electrical testing / fault finding on site. REQUIRED QUALIFICATIONS • Technical/Vocational diploma or degree in electrical engineering or C&G Level 3, NVQ 3 & requirements for electrical installations (BS7671) or equivalent., • Experience with Amtech, AutoCAD, Excel and EPLAN, or other drawing package., • Knowledge of current electrical regulations / safety requ...

Are you an experienced Electrical Engineer looking for a high-value contract on major infrastructure projects? Do you want to play a leading role in delivering complex, multi-disciplinary engineering solutions with a nationally recognised consultancy? We are seeking two Electrical Engineers to join a leading contractor/consultancy on a 6-month contract, with the potential for extension. This role offers a hybrid working model, with offices in Peterborough. The Opportunity ·£75 per hour (Inside IR35) ·6-month contract with strong extension potential ·Hybrid working (3 days office/site-based) ·Opportunity to work on high-profile, critical infrastructure projects ·Exposure to complex, technically challenging work within a leading consultancy environment This is a fantastic opportunity to work on critical UK infrastructure programmes, particularly within the water sector, contributing to innovative and large-scale engineering solutions. You will be part of a highly skilled, multi-disciplinary team, with the chance to take ownership of technical delivery while supporting the development of junior engineers. What You Will Be Doing ·Leading and coordinating Electrical and ICA design delivery across complex projects ·Producing high-quality technical deliverables including single line diagrams, load schedules, MCC specifications, and control philosophies ·Collaborating wi...

Role: Maintenance Engineer Nights Location: Market Deeping Salary: £53,000 Shift: Sunday to Thursday | 10pm 6am Most maintenance jobs promise great opportunities. This one gives you a brand-new site, proper autonomy on nights, and a business that actually invests in its engineers. If youre the type of Maintenance Engineer who enjoys fault-finding, fixing problems fast, and keeping production moving without management breathing down your neck every five minutes keep reading. Our client is growing fast and has recently opened a new facility in Market Deeping. Theyre now looking for a multi-skilled Maintenance Engineer to become a key part of the night shift operation. You wont just be firefighting breakdowns here. Youll be trusted to improve machinery, prevent failures before they happen, and genuinely make an impact on how the site performs. What Youll Be Doing Maintenance Engineer • Carrying out planned and reactive maintenance across production machinery, • Diagnosing electrical and mechanical faults quickly to minimise downtime, • Working independently on nights to keep production running smooth...

Enjoy a permanent Electrician role with a company van, fuel card, bonus scheme and company benefits, all provided from day one. Join a well-established property maintenance contractor working across the Peterborough to Leicester patch, where your skills will make a real difference in tenants homes. This is a fantastic opportunity to become part of a stable team, delivering electrical repairs, maintenance and testing across domestic properties. With Monday to Friday core hours of 8am to 4:30pm, an on-call rota, and a generous benefits package, youll have everything you need to succeed in your role. Id love to see CVs from anyone who has worked as an Electrician, Electrical Tester, Electrical Engineer or Maintenance Electrician. As an Electrician, you will be: • Working across the Peterborough to Leicester patch, • Carrying out electrical repairs and maintenance, • Completing testing, inspection and remedial works, • Working across domestic properties to a high standard, • Taking part in an on-call rota every 6 to 8 weeksId love to speak to anyone who has:, • NVQ Level 3 in Electrical Installation with practical AM2, • 18th Edition Wiring Regulations, • 2391 Testing and Inspection would be a bonus, but is not essential, • A full UK driving licence with 5 points or less, • No...

Mechanical Technician (Workshop Engineer/Forklifts/Automotive) Newark, Nottinghamshire £37,000 - £42,000 + 25 Days Holiday + Bank Holidays + 6% Employer/4% Employee Pension + Life Assurance + Uniform + Parking + Specialist Tooling + Training + Career Progression + Canteen Tuesday to Saturday 8am to 4.30pm Mechanical Technician (Engineer) role available in a highly successful and international manufacturer of forklift trucks. You'll enjoy great benefits associated with a world leading company including training on their product range. The role will be suitable for engineers from any kind of plant, forklifts, HGV, agricultural or similar equipment. Automotive technicians/motor trade applicants will also be suitable as full training will be given. You need to demonstrate mechanical service and repair skills on vehicles or plant equipment. You'll form part of a highly skilled team of 4, doing mechanical and electrical service and repair of forklifts. You'll order any spares when needed and communicate progress to the Workshop Manager. The role is based at a client's site in Newark. The Mechanical Technician role in brief: • Carry out service and repair work on workshop and service basis on a range of used forklift trucks., • Order parts The Person Required: • Experience of...

Based in the area of Oundle near Peterborough, the hours of work are 7am - 3:30pm, Monday to Friday DAYS ONLY! This Mechanical Maintenance Engineer vacancy offers a salary of up to £50K+ plus 5% bonus and company pension matched to 10%, generous holiday allowance and overtime opportunities at x 1.5 and x 2, for those who want it, taking potential earnings to in excess of £55,000+. The company is a major international manufacturing business with a large network of UK manufacturing plants across the country and a fantastic reputation. They manufacturer products within a fast-paced automated environment and can offer you an array of training, development, and career progression opportunities, including upskilling and cross skilling . Roles and Responsibility of Maintenance Engineer: Responsible for the development of plant wide proactive and reactive mechanical and Electrical maintenance activities to ensure the optimum performance of the factory Carry out Planned Preventative Maintenance, Inspections, Service and Repairs on Conveyors, Shafts, Bearings, Motors, Drives, Gearboxes, pumps and PLC's Carry out PPM schedules and Reactive Maintenance Activities as required To Be Successful as a Maintenance Engineer: You will need to hold the following qualifications to be considered: City and Guilds Level 3, BTEC & NVQ Level 3, OR Apprentice trained etc in either mechanical and or electrical engineering with a multi-skilled u...

Maintenance Engineer • Multi-Skilled Maintenance engineer jobs role / Senior Maintenance Engineer ; Peterborough / Huntingdon, • No shifts, 13% pension!! 33 days holiday, profit bonus, private medical, flexible working hours (days), • Most of the maintenance engineers do 06:30 to 15:00. Flexible with hours. Days NO shifts, • Incredibly stable £80m t/o 800+ headcount business : offering you & your family long term job security This is a Multi-Skilled Maintenance Engineer jobs role or Electrical Maintenance Engineerjobs role. Are you seeking maintenance engineer jobs on days? Do you want to have flexibility on working hours and a job that will give a good family balance? We are looking for an electrical engineer / electrical Maintenance Engineer or multi-skilled engineer who is electrically biased or an Electrical Engineer, Electrical Fitter, Multi-skilled engineer, electro-mechanical engineer, Plant Engineer or Industrial Electrician who is commutable to Sawtry, Peterborough, Huntingdon region maintenance jobs in Cambridgeshire The Maintenance Engineer jobs working environment, opportunities and rewards: • No shifts!, • Normal working hours (days), flexible to suit you and your family (maybe starting early and finishing early say 06:00 15:00) or later 8:00 to 16;30, • 13% pension!! 33 days holiday, profit bonus, private medical

Job post summary Date posted: 6 May 2026 Pay: £38,000.00-£45,000.00 per year Job Description: Commercial Catering Engineer JD Catering Equipment Solutions Ltd East Anglia (Based in Dereham, Norfolk) Salary £38,000 – £45,000 per year (DOE) + overtime + call-out payments Job Type Full-time Permanent Job Description JD Catering Equipment Solutions Ltd are looking for an experienced Commercial Catering Engineer to join our growing team. This is a field-based role covering East Anglia, working on a wide range of commercial catering equipment across multiple customer sites. Domestic Gas Engineers are encouraged to apply – if you hold CCN1 or CCLP1, we can support you in transitioning to COMCAT commercial qualifications. Key Responsibilities Service, maintenance, and installation of commercial catering equipment Fault finding and repair of gas and electrical appliances Attending breakdowns and emergency call-outs Carrying out routine servicing and safety checks Ensuring all work complies with current regulations Completing job reports and documentation Requirements COMCAT gas qualifications (essential) or willingness to upskill from domestic (CCN1 / CCLP1) Certified to work on Natural Gas (NAT) and LPG appliances Electrical fault-finding skills (preferred) Refrigeration / F-Gas qualification (advantage...

Heavy Plant Engineer Nottingham £18ph to £21ph + Overtime + Van + Training NEOS Engineering are working with a growing and well-established recycling machinery business who are looking for a Field Service Engineer to join the team. The role will see you working on a range of recycling and waste machinery including shredders, conveyors, screens, crushers and associated heavy equipment. The position is field based covering customer sites across the Midlands and surrounding areas. The ideal candidate will have experience working on heavy plant, recycling equipment, quarry machinery, agricultural machinery or similar heavy mechanical equipment. Strong hydraulic and mechanical fault-finding experience is essential. The Role: • Service, maintenance and repair of shredders and recycling machinery • Diagnosing mechanical and hydraulic faults • Field based role covering customer sites • Carrying out inspections, breakdowns and planned maintenance • Working closely with customers and providing a high level of service The Candidate: • Experience as a Plant Fitter, Recycling Engineer, Crusher Engineer or Field Service Engineer • Strong mechanical and hydraulic knowledge • Electrical fault-finding experience advantageous • Full UK Driving Licence • Looking for a long-term opportunity with overtime available If interested, apply now for immediate co...

Field Service Engineer - FLT and MHE Location: Covering Grantham - Newark area. Hours: Monday to Friday - 40 Hour or 45 Hour Week available Salary: £30,000 - £37,000 (40 Hours) or £36,000 - £42,500 (45 Hours) I am currently partnering with a market leading materials handling business that are currently looking to recruit an experienced field service engineer to service and maintain Forklift Trucks and other MHE equipment across customer sites. As a Field Service Engineer, you'll cover your local patch carrying out diagnostics, repairs, and servicing of FLT and material handling equipment. You'll have the freedom to plan your own day while enjoying the backing of a strong technical team and ongoing manufacturer training. Key Requirements of the Field Service Engineer: Strong Engineering background - ideally with FLT/Mobile Plant/HGV or industrial Vehicle experience. Engineering skills within Electrical, Mechanical and Hydraulics are required. Recognised engineering qualification (NVQ Level 3, City & Guilds or equivalent). Full UK Driving Licence is essential. Previous field service engineering experience is advantageous but not essential. The Field Service Engineer will benefit from: Full Training and Induction Scheme Company van & fuel card. Regular overtime available with Door to Door pay. Company Pension Scheme Tools provided If you are interested in this role and feel that you have...

Commercial Catering Engineer - Immediate Start 📍 Peterborough 💰 Competitive Salary ((CIS or PAYE) + Van 🕒 Contract | Full Time 🚨 Immediate Start Available Premier Recruitment Hub is currently recruiting for an experienced Commercial Catering Engineer to join a growing and well-established business covering the Peterborough area. This is a field-based role working across commercial kitchens, restaurants, hotels, and catering facilities carrying out service, maintenance, repairs, and fault finding on a range of commercial catering equipment. Responsibilities: Service and maintenance of commercial catering equipment Fault finding and repairs on gas and electrical catering appliances Planned preventative maintenance (PPM) Emergency breakdown response Providing excellent customer service on-site Completing service reports and documentation Requirements: Previous experience as a Commercial Catering Engineer COMCAT qualifications preferred Experience with gas and electrical catering equipment Full UK Driving Licence Strong fault-finding skills Ability to work independently Package: Competitive salary DOE Company van and fuel card * Immediate start To apply, send your apply here and a memeber from the Premier Recruit6ment Hub Team will be in touch to discuss the next steps with you...

The EC&I Engineer Manager will have heavy involvements in maintenance scheduling and site projects within an industrial/manufacturing environment. This position is based in Purfleet-on-Thames and requires a strong technical background to ensure the smooth operation and optimisation of processes. Client Details The company is a reputable organisation within the industrial and manufacturing sector. As a medium-sized entity, it focuses on delivering high-quality products and services while maintaining a commitment to innovation and operational excellence. Description Act as the expert authority on site with regards to (EC&I) systems; in particular, ensuring plant is maintained safely and systems are always made available. Work closely with the mechanical and operations departments, planning strategic planned and reactive maintenance around the production requirements to ensure commercial KPIs are met. Manage projects as required, ensuring that the company receives high levels of quality, cost-effectiveness and customer service. Ensure compliance with relevant and changing legislation, maintaining a continuous improvement approach to EC&I systems and technology, Important focus on BS7671 & BS6626. Developing the CMMS system to ensure the operation and maintenance of the plant is in line with the O&M manuals and bespoke plan requirements. Day to day management of the in-house electrical team of electricians/EC&I Technicians, including p...

Multi-Skilled Engineer - Peterborough Shift: Monday to Friday Salary: £49,000 - £51,000 Are you a Multi-skilled Engineer or Mechanical Engineer or Electrical Engineer looking for your next move in engineering? We are looking for a Multi-Skilled Engineer to join a busy FMCG manufacturing site. This is an excellent opportunity for an engineer with either a mechanical or electrical bias to join a fast-paced production environment. You will be responsible for carrying out planned preventative maintenance, responding to breakdowns, and supporting machinery modifications to keep production running efficiently. Key Responsibilities Carrying out PPMs across production machinery and site equipment Responding quickly to breakdowns to minimise downtime Supporting machinery modifications and improvement projects Ensuring all work is completed in line with health & safety standards Working closely with production and engineering teams in a fast-paced environment Requirements Mechanical or electrical bias Level 3 qualification in a relevant engineering discipline Previous experience within FMCG or manufacturing environments Strong understanding of health & safety procedures Reliable team player with good communication skills What's on Offer Monday-Friday shift pattern Competitive salary package Stable, fast-paced manufacturing environment Opportunity to work within a...

MULTI-SKILLED MAINTENANCE ENGINEER Job Title: Multi Skilled Maintenance Engineer Location: Spalford Salary: £45,000 Shift: 4 on 4 off Days & Nights A superb opportunity has arisen for a Multi Skilled Maintenance Engineer to join a supportive and collaborative engineering team within a busy manufacturing site. The company prides itself on a positive working culture where teamwork and mutual respect are at the centre of daily operations. You will be responsible for both electrical and mechanical maintenance, responding to breakdowns, completing planned preventative maintenance, and supporting continuous improvement initiatives across site machinery. Sector – Factory Maintenance · Multi-skilled maintenance experience within an industrial manufacturing environment.

Fuel your future with AO and earn up to £2,000 in performance bonuses! We're all about balance — enjoy a shift pattern that fits your lifestyle, giving you the freedom to work in a way that works for you. As one of our Gas Engineers, you'll keep full control of your Gas Safe card, while enjoying a reliable income you can count on. • Salary: £39,000 - £42,000 per annum, • Shift Pattern: 4 on 4 off / 6am- 6pm, • Location: Broadway Business Park, Yaxley, PE7 3EN Here's what you can expect to be doing as a Gas Installations Engineer: As a Gas Engineer at AO, you'll team up with one of our drivers to visit customers' homes and install gas appliances and electrical products. No repairs—just safe, high-quality installs and brilliant customer service, every time. A Few Things About You: Essential • Full UK manual driving licence with no more than 6 points, • CCN1 & CKR1, • To be over the age of 21 for insurance purposes, • At least 1 year of experience within gas installations Desirable • Some experience of installation of electrical appliances would be ideal but we'll train you to be electrically competent. Our Benefits: As a Gas Installations Engineer, you will gain: • A 4 on...

Job Title - Resident Engineer Location - Newark-on-Trent, Nottinghamshire Salary: £35,000 - £43,000 (Inc Shift Allowance) Shift: Tuesday to Saturday (8am - 4:30pm) - 40 Hours Job Role: We are seeking a Resident Engineer to join a leading materials handling business, based full-time at a key customer site. You will be responsible for servicing, maintaining and repairing forklift trucks and a range of other Material Handling Equipment (MHE), ensuring minimal downtime and excellent service delivery. Sector - Industrial Forklift/Vehicle Maintenance Non-Negotiable Requirements of Resident Engineer: • Must have hands on Servicing or Maintenance Experience Essential requirements of Resident Engineer: • Maintenance experience of Forklift Trucks or Mobile Plant Machinery or HGV's or industrial Vehicles., • Have hands-on experience in the following disciplines: Electrical, Mechanical and Hydraulics., • Recognised Engineering Qualification. Desirable Requirements of Resident Engineer: • Full UK Driving License, • Minimum Level 3 Qualification in Engineering. The Resident Engineer will benefit from: • Full Training and Induction Scheme, • Company P...

Peterborough Salary - Negotiable DOE Monday - Friday days. Your new role: Based in Peterborough, you will be joining the UK's leading water/ clean water equipment and processing manufacturing business, who now, due to continued growth, are looking for a Multi Skilled Maintenance engineer to join their engineering team.Offering a range of industry-leading benefits, including private healthcare, a generous holiday allowance and other perks, this is an excellent time to join this fast-expanding company in a hands-on maintenance role! Key Responsibilities & Duties: Perform planned, preventative and reactive maintenance on machinery and equipment across the plant Mechanical & Electrical fault-finding Fulfilment of facility maintenance tasks Installation of new equipment and machinery Work to HSE standards set at the site. Complete testing of electrical circuits and panels This is just a summed-up list, and other duties will be required. Skills & Experience required: Previous experience in a similar Mechanical and/or electrical maintenance role Electrical qualifications (NVQ3 in electrical-based units, City and Guilds Level 3 in electrical installations or equivalent) Ability to fault find both mechanically and electrically Experience in a similar fast-paced factory/plant environment Qualifications such as 18th edition would be highly desirable. Able to work individually and/or within a team environment What you ...

Peterborough Salary - Negotiable DOE Monday - Friday days. Your new role: Based in Peterborough, you will be joining the UK's leading water/ clean water equipment and processing manufacturing business, who now, due to continued growth, are looking for a Multi Skilled Maintenance engineer to join their engineering team.Offering a range of industry-leading benefits, including private healthcare, a generous holiday allowance and other perks, this is an excellent time to join this fast-expanding company in a hands-on maintenance role! Key Responsibilities & Duties: • Perform planned, preventative and reactive maintenance on machinery and equipment across the plant, • Mechanical & Electrical fault-finding, • Fulfilment of facility maintenance tasks, • Installation of new equipment and machinery, • Work to HSE standards set at the site., • Complete testing of electrical circuits and panels This is just a summed-up list, and other duties will be required. Skills & Experience required: • Previous experience in a similar Mechanical and/or electrical maintenance role, • Electrical qualifications (NVQ3 in electrical-based units, City and Guilds Level 3 in electrical installations or equivalent), • Ability to fault find both mechanically ...

Electrical Installation Engineer We are currently seeking a hardworking and resourceful Electrical Installation Engineer to join our dynamic team of highly skilled Engineers. The role requires a self-motivated, practical problem solver with good communication skills. A key activity for this role will be to survey, install, commission and support site based control systems and equipment for one of our key clients. Predominantly electrical biased but there will be some elements of PLC programming (training will be provided). You could be working alone but other times with another engineer or as part of a team. The candidate will be responsible for ensuring work is completed to the highest standard within agreed deadlines. Whilst the majority of the work will be within standard working hours this operational role requires you to be flexible and will involve extensive travel to sites (approx. max of 3 hours away). Some time away from home is to be expected but it is not planned to exceed 20% of the working week. Hotels will be provided for any commute times over 1.5 hours. Full-time position (08:30-17:15 Monday to Thursday and 08:30-16:00 on Fridays) What we are looking for: • Electrical qualifications C&G, BTEC, NVQ3, ONC or HNC/HND, 18th edition required., • ECS Gold card holder, • Previous experience in a service & support, electrical i...

Our client, a leading manufacturer of products for highly regulated industries including Marine, Medical, and more, are looking for an Electronic Engineer based in Newark to join their team on a permanent basis. This is an office-based role supporting the development of innovative control panel and interface technologies for blue-chip customers across a range of industries. Key responsibilities of the Electronic Engineer job based in Newark: Support the design, development and testing of electronic hardware products. Manage and implement hardware design changes driven by cost, obsolescence, or performance improvements. Prepare technical specifications, reports, and documentation to a high professional standard. Perform fault finding and debugging of electronic devices. Conduct quality and reliability analysis (e.G. MTBF). Support EMC testing and wider electrical validation activities. Work closely with production and production engineering teams to resolve issues and drive improvements. Provide guidance and support to technicians and junior team members. Identify and manage technical risks and issues throughout the product lifecycle. Experience required for the Electronic Engineer job based in Newark: Degree qualified in Electrical/Electronic Engineering, Computer Engineering or similar. Experience in an electronics design or manufacturing environment. Experience designing analogue and digital circuits using tools such as A...