Engineer technology jobs in Bristol - Page 6Create job alerts

Auto Electrician Location: Bristol Hours: 38 hours per week Pay Rate: £19.70 per hour + weekend premiums potential of an extra £4000 per annum Bonus: £3,000 joining bonus The opportunity on offer for the HGV Auto Electrician I’m recruiting on behalf of a major UK bus and transport operator whose engineering teams are working at the forefront of modern vehicle technology. With continued investment in new and electric vehicles, modern workshops, and engineer development, this is an excellent opportunity for an experienced PSV/HGV Auto Electrician looking for long-term stability and progression. You’ll be joining a skilled and energetic engineering team, maintaining a large and varied fleet while developing your expertise on state-of-the-art electric and hybrid vehicles. Full PPE, tools, training, and a clear career pathway are provided. Key Responsibilities of the HGV Auto Electrician Diagnose vehicle electrical faults and determine the correct repair methods and parts Carry out servicing, inspections, and routine vehicle examinations to DVSA standards Overhaul and repair complex electrical systems including engine management and ECUs Work on electronic braking, suspension, destination equipment, and multiplex wiring systems Attend on-road breakdowns and carry out vehicle recovery and road testing where required Use diagnostic equipment including ECU software, multimeters, and other electrical testing tools Key Requirements of the HGV Auto Electrician NVQ Level 3 or City & Guilds equivalent in Auto Electrical or Vehicle Maintenance Proven experience in PSV, HGV, bus, or commercial vehicle auto electrics Strong fault-finding and diagnostic capability on modern vehicle systems Valid UK driving licence (ability to obtain PCV licence required) Right to Work in the UK A proactive, team-focused approach with a commitment to safety and qualityIf you are interest in the role of HGV Auto Electrician, then please apply today or call Dudley on (phone number removed) for a chat

My Client is recruiting for a Technical Director - Waste Water Process Engineering The Design & Advanced Technology (D&AT) Team is seeking a Technical Director for Waste Water Process to join our team in the UK. We are looking for an energetic and experienced Waste Water Process Engineer that can both lead as technical expert in wastewater treatment and driving forward business results. We specialise in all aspects of process engineering within the Water Sector, including water, waste water and bioresources in the UK and internationally. Process Engineering project opportunities also stretch to other sectors such as nuclear and defence. We're committed to providing industry-leading engineering solutions right through the project lifecycle from feasibility to process commissioning, with value added through client-side support as well as construction phases. As a key member of our technical leadership team, you'll play a vital role in shaping and delivering transformational programmes of critical UK infrastructure for our Water market clients - clients like Thames Water, Anglian Water, Environment Agency, Welsh Water, United Utilities, Scottish Water, and more. You'll be part of and lead in talented, multi-disciplinary teams delivering cutting edge, iconic projects across water sector at home (UK) and abroad. By providing technical leadership across the organisation you'll drive results, by contributing to functional strategy, influencing senior stakeholders, and leading within the process group and multidisciplinary project teams, to deliver measurable outcomes. In this role, you will set direction for complex, high-impact projects and initiatives, anticipate business and regulatory challenges or changes, and develop innovative solutions and offerings that move the business forward. Being a Technical Director with us involves UK wide travel. We offer hybrid working which involves 3 days per week travel/office based. This position can be based at any of our main locations: Surrey, London, Bristol, Exeter, Birmingham, Manchester, Newcastle, or Glasgow. It can also be based in our other offices but may require additional travel to main locations as needed: Peterborough, Cambridge, Cardiff, Swansea, Derby, Leeds, Belfast, Edinburgh. Your role As a Waste Water Process Technical Director in the D&AT Practice, the successful candidate would have the following responsibilities: Provide Technical Leadership within discipline for the national D&AT practice. Influence D&AT Practice wide initiatives and recommend best practices to improve internal process and services. Serve as a recognised expert and technical authority in Waste Water Process Engineering across the D&AT Practice and wider business. Provide visible representation of your and the Company's Waste Water Process Engineering technical expertise to our current and prospective clients. Collaborate with stakeholders at all levels, including internal and external clients, operational staff, project teams, or external stakeholders. Recommend and drive improvements to processes, services, and technical practices while ensuring robust engineering governance is consistently upheld. Oversee technical input into bid proposals, defining the delivery strategy and working with cross‑functional teams to prepare high‑quality, compliant, competitive submissions. Proactively identify opportunities for cross‑selling and business growth, using commercial insight to strengthen and expand client relationships and selling our value proposition to clients. Grow, develop, and manage the Waste Water Process engineering capability within the national practice, supporting talent development and succession planning. Anticipate emerging business, regulatory, and technology challenges, identifying risks and opportunities early and advising senior leadership. Provide strategic oversight across multiple complex, multidisciplinary projects, ensuring technical excellence, safe delivery, and alignment with client and practice objectives. Work independently even in the most challenging situations. Act as the point of escalation for the most complex technical matters and exercise personal judgement to find solutions.Experience and Qualifications: The ideal candidate would be a well-rounded and versatile individual who exemplifies the following key skills and attributes: A degree in Chemical Engineering or equivalent (e.g. Environmental, Water Engineering, etc.) Chartered Engineer (preferably IChemE or CIWEM). Extensive experience in progressively senior technical roles, including significant leadership of complex, high‑risk, cross‑disciplinary projects and programmes. Nationally or international recognised subject matter expertise in a waste water treatment process and principles. Expert understanding of the integrated nature of treatment processes and principles, including: preliminary, primary, secondary, tertiary, quaternary treatment, sludge treatment and their impact on emissions-, odour -, carbon and energy management, required as a minimum. Experience in the UK Water market is essential. Expert knowledge of current design codes and standards as well as industry best practices including, including CDM Regulations. Extensive experience of design and delivery of projects with adherence to UK safety and environmental regulations, process safety techniques (e.g. HAZOP), knowledge of capital and operational costs - and risk assessments, as well as whole life carbon assessments. Commercially astute, with experience shaping winning proposals and driving practice and business growth. Champion continuous improvement, driving enhancements to processes, services, technical standards, and innovation across the practice. Demonstrates strong communication skills, with the ability to convey complex ideas with clarity, anticipating challenges and persuading senior stakeholders to adopt new perspectives, and navigate diverse, international and cross-cultural delivery. Demonstrable comprehensive knowledge in leading treatment process design and integrating elements as part of an existing or new treatment process with experience across all design phases, including construction. Experienced in identifying and promoting innovative solutions, challenges the status quo. A proactive, highly motivated mindset with a collaborative approach to drive teamwork and shared success across projects and the wider D&AT practice

Rydon Maintenance currently have an exciting opportunity for a Facilities Management Supervisor to join our Bristol based NHS Hard FM repairs and maintenance team. This team delivers planned, preventative and responsive building maintenance and repairs. Rydon Maintenance is an expanding division of the Rydon Group and is successfully providing hard facilities management (Hard FM) to a variety of clients, predominantly within the healthcare sector. Rydon Maintenance provides hard FM services across England for a growing number of NHS Trusts. We look after more than 250 buildings on behalf of 20 NHS Trusts on a planned, responsive repairs and small works projects basis. We provide maintenance services to hospitals, ambulance trusts, primary care trusts as well as mental health trusts. Using the latest technology we ensure properties are well maintained, efficient and fit for purpose. Job Purpose Working in a mobile role, as Hard FM/Services Supervisor you will be hands on undertaking building repair works and PPM's as necessary. In addition to the day to day repair and maintenance duties, as Supervisor you will act as focal point for external sub-contractors organising and arranging planned maintenance visits where necessary. You'll ensure health and safety compliance, maintain site documentation and make sure records are up to date for audits. You'll also assist in client inspections and carry out inspections to ensure works are carried out satisfactorily. Normal working hours are 8am to 5:00pm Monday to Friday and you'll also participate in an on-call rota system (which offers the opportunity to increase your earnings and be involved in additional urgent repairs). What we can offer you as Hard FM/Services Supervisor; A competitive starting salary Company van + Fuel card Holiday Entitlement: 25 days per annum Holiday Purchase Scheme: Buy up to an additional 5 days holiday Pension Scheme: 4% contributory. On call allowance and overtime rates paid per call out. Health Cash Plan: helping you spread the cost of essential healthcare 24/7 EAP Service: free advice, counselling and support for you and your family whenever you need it. Wellbeing and mental health champions readily available at work. Access to an employee discount scheme which includes a wide-range of special offers and discounts on insurances, lifestyle goods and services. Flexible benefits for you to choose from including Critical Illness, DenPlan and Cycle to work schemes. Employee Referral Scheme: recommend a personal connection to us and claim a cash reward for their successful hire. Free Flu Vaccinations and Eye Care Vouchers Opportunities for you to progress your career across the business By joining Rydon, you become part of a talented, dedicated team who are passionate about supporting the NHS and its people in their vital work. You will play an important role in ensuring a safe and comfortable environment for staff and service users. Experience Required The successful candidate will have previous supervisory experience or be an experienced maintenance engineer looking to progress their career. Experience will ideally have been gained supporting NHS clients, this might have been gained working directly for the NHS, or a maintenance contractor providing services within the NHS. All candidates with other commercial experience will also be considered (ie, offices, supermarkets, hotels etc) You will have a technical knowledge of building services maintenance and hold an NVQ or equivalent in a related building services qualification or completed a formal apprenticeship or craft within building services. A UK driving licence is required and the position is subject to a satisfactory DBS check. If you have the above experience, we would strongly encourage you to apply. Additional Information As a well established, progressive company we are committed to attracting and retaining individuals by offering an excellent benefits package that includes a wide range of core and voluntary benefits. Rydon is an equal opportunities employer and promotes diversity in employment. Successful candidates will be selected solely on their ability to carry out the duties of the post. To apply online, please use the 'apply for this job link' at the top of this page to be redirected to our dedicated careers page to complete your application

SRT Marine Systems plc (SRT) is a market leader in the domain of international marine surveillance technology and systems. We are a respected, established, and an ambitious multi-national company headquartered in the UK with a global customer base. The company has a worldwide impact in the marine sector by leading the next generation of maritime domain awareness technologies "MDA", products, and systems that significantly enhance security, safety, environmental protection, and sustainability. Our customers are global and range from the largest national coast guards to individual vessel owners. SRT is an exciting company where high-quality results are rewarded. We are ambitious and constantly seek to innovate in order to deliver better products and services to our customers. We strive to make SRT a rewarding and challenging place to work, where talented, hard-working individuals have the opportunity to make a real impact across the marine industry. Role overview of our Electrical Systems Project Engineer We are seeking an experienced Electrical Systems Project Engineer to provide in-person and remote support to our field installation teams and subcontractors. Your role as an Electrical Systems Project Engineer will be to create, review and check electrical installation schematics and plans for a wide variety of equipment ranging from a maritime surveillance radar to a genset or CCTV security and building monitoring systems, along with hands-on electrical installation configurations. Please note: The role of Electrical Systems Project Engineer is a role where you will travel globally for our projects, whether this is the Middle East, Far East, South East Asia, Africa's region - you will be expectedto travel and live in country with an agreed rotation period up to 12 weeks in-country, 2 weeks home. Responsibilities (not exhaustive): Review and approve proposed electrical installation configurations for a variety of equipment that rely upon electrical utility and power systems Physically oversee and or undertake installations with a "hands-on" approach and involvement Train and coach field engineering teams to ensure high quality and consistent workmanship Help build and maintain standard work procedures and standards Review equipment installations, identify issues and propose / rectify remedial work Where relevant, deeply understand equipment installation and configuration requirements to enable correct commissioning Ensure all installations comply with technical standards, safety protocols, and project specifications Conduct system testing, troubleshooting, and maintenance to ensure optimal performance of all integrated systems Document installation procedures and generate detailed reports for project stakeholders Help to devise and define long term maintenance programs that ensure systems and equipment are operate optimally and reliably Requirements ESSENTIAL - Qualification: Time served apprenticeship or QBE with holding a minimum 17th Edition Proven experience in electrical installations - for example integrated CCTV and building monitoring systems, building power systems and or communication towers Strong understanding of electrical standards, safety regulations, and networking fundamentals Ability to read and interpret electrical schematics, server rack layouts, and technical drawings, schematics, standards and specifications Excellent problem-solving skills and attention to detail Mobile Platforms (e.g. onboard vessels, mobile command units, aerospace) Appreciation of cultural differences in overseas territories andability to communicate well with overseas colleagues The role encompasses both our MDA System and the physical building electrical infrastructure. Benefits of the Electrical Systems Project Engineer Highly competitive salary, fantastic accommodation and flights IAW company policy Matched company pension contributions up to 5% Development opportunities SRT Marine Systems plc are an equal opportunity employer. We are committed to creating an inclusive working environment for all employees and actively encourage applications from all sectors of the community

Principal Integration and System Validation Engineer Take ownership of system integration and validation activities, shaping trials and evidence gathering to qualify complex defence systems. Develop expertise across multiple environments and influence outcomes from lab to live trials. Who we are looking for • British Citizen, SC clearable • Experience in system integration, validation or proving trials • Able to work across multiple teams, departments and sites Salary and rewards Up to £50,000 per annum with company bonus of up to £2,500 Your role • Plan, execute and report on functional, system and acceptance trials • Analyse system behaviour across internal and external interfaces • Investigate and resolve design or integration issues • Support safe and reliable trials, maintaining risk assessments and managing hardware and software assets Your experience • Strong verbal and written communication skills • Experience with verification and validation lifecycle, requirements management and defect reporting • Able to work in large, multi-site teams • Customer-facing experience advantageous Benefits and balance You will enjoy practical benefits including: • Pension contribution up to 14% • Paid overtime opportunities • Flexible working arrangements Where you will work Bristol, onsite 3–5 days per week, with potential travel across the UK and abroad Due to the nature of work at our client’s site, these vacancies are only open to British Citizens who hold SC clearance or can obtain it. This is a permanent role. Electus Recruitment Solutions provides specialist engineering and technical recruitment solutions to high-technology industries. Thank you for your interest. If you do not hear from us within seven working days, please presume your application has been unsuccessful on this occasion. You may resubmit your CV or details in the future, and we shall assess your suitability then

Role: Laser Systems Engineer Salary: Up to £53,000 + bonus & benefits Location: Bristol, Hybrid (3 days per week on-site) Join a cutting-edge team developing the UK’s first deployable Laser Directed Energy Weapon (LDEW) for the Royal Navy. As a Laser Systems Engineer, you’ll work across requirements, design, performance analysis, and certification to support the DragonFire programme. This is a hands on role at the forefront of strategic, national defence technology. Key Responsibilities: Influence and contribute to the design and development of high-power laser systems Support requirements analysis, specifications, and system-level design Communicate complex laser and optics concepts to technical teams and stakeholders Collaborate with partners, customers, and internal teams to deliver high-quality results Participate in systems proving, design assurance, and certification activities Essential Experience: PhD or industry experience in laser technology at a system level Strong understanding of laser physics and optics Proven technical communication and problem-solving skills Ability to work in multidisciplinary, international teams Desirable Experience: High-power laser systems development Systems architecting tools (DOORS, DOORS NG, Rhapsody) Defence system development, requirements flow-down, and certification Benefits: Annual Bonus Competitive Pension Paid overtime and flexi leave Enhanced parental leave Healthcare cash plan, subsidised meals, free parking

Senior Tooling Design Engineer Bristol £50,000 - £60,000 + Bonus + Hybrid + Benefits - listed below. This is a great opportunity to join a global company, which design and manufacture niche products from its site in Bristol, for customers across the globe. You will be joining the Design department and enjoy a varied role, being responsible for the overall Injection mould tooling design process, as well as making Jigs and Fixtures. The Role: Reporting to the Engineering Manager. Responsible for the Injection mould Tooling design and dev process, from cradle to grave. Making jigs and fixtures. Producing 3d models using Solidworks. Produce cad drawings for; Injection mould Tooling, Jigs and fixtures. Validating designs through prototyping. Putting together business plans to justify tooling expenditure. Support the workshop in terms of commissioning new tools. The Candidate: Degree in Engineering or relevant apprenticeship. 5+ years working in tool design - injection moulding or similar. Good experience with 3d modelling software - Ideally Solidworks. Producing technical drawings and process control docs. Experienced with engineering calcs - either hand or FEA. The Benefits: Bonus Company Sick Pay 25 Days + Bank Holidays Cash Plan scheme GP services EAP Wellbeing App SocialsIf you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business

Bristol An exciting role for a Systems Engineer to be involved in a variety of projects developing ground breaking technologies through the use of Modelling & Simulation. With opportunities to support field trials and work with a dedicated team of Engineers to help your own career development this role is one not to be missed! Salary: From £ 40,000 to £58,000 depending on experience Dynamic (hybrid) working: 3-5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: We are looking for Systems Engineers to join a growing team to perform activities including modelling, algorithm development and systems studies. Our work covers simulation and modelling of the entire Seeker chain from radar propagation, to hardware response, to the embedded software algorithms on-board the Seeker. These algorithms are developed in, and auto-coded directly from our models, allowing us to rapidly test, iterate, and deliver sophisticated defence capability. There are roles available across multiple Seeker programmes, from those in the early concepting phase (including developing groundbreaking technologies like Active Electronically Scanned Arrays (AESAs) and highly integrated multi-mode sensors), through assessment and development phases (such as Future Cruise Anti-Ship Weapon FC/ASW) and, supporting spiral development on our in-service phase Seekers. You may have the opportunity to get involved in a variety of other activities within our department including support to field trials and lab testing. There are numerous progression and development opportunities available, as well as interaction with stakeholders across a dynamic multi-national engineering team. We are also looking for more experienced engineers wishing to develop their leadership skills across teams and work packages. What we're looking for from you: Degree level qualification in a STEM subject or equivalent experience Modelling and Coding with proficiency in MATLAB Algorithm Development Data Analysis and Technical Report WritingDesirable experience: Advanced MATLAB Proficiency in Simulink including Embedded Coder Formal software or firmware development experience, especially C and HDL Knowledge of RF systems and digital signal processing Model verification, configuration control and model release processes Continuous Integration and Testing Machine Learning and AIYou will be an adaptable and proactive individual who enjoys finding innovative solutions to complex engineering problems. Most importantly, if you have a passion for the industry and technology, then we want to see you! Our department is an encouraging community, in which you can develop your skills, gain experience and progress your career, giving you exposure to some incredible technologies and products. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SF1

Job Title: Environmental Engineer Location: Bristol/Yeovil Contract Type: Temporary Summary: Join a leading aerospace organisation as an Environmental Engineer and contribute to innovative projects that prioritise sustainability and compliance with environmental legislation. You will collaborate with cross-functional teams to ensure that environmental considerations are integrated into the design and development of products and systems. About Us: Our client is a premier aerospace company recognised for its commitment to innovation and excellence in the aviation and defence sectors. By becoming part of our team, you will play a vital role in shaping sustainable solutions that protect our planet while advancing technology. About the Role: As an Environmental Engineer, you will support the System Safety and Environmental Engineering Team in adhering to environmental policies and standards. Your responsibilities will include developing environmental management strategies, conducting assessments, and collaborating with stakeholders to mitigate environmental risks. Your attention to detail and ability to communicate effectively will be essential in ensuring compliance and driving sustainability initiatives. Key Responsibilities: Integrate environmental management into the design and development of products and systems. Support technical leads in environmental management strategy development and implementation. Create environmental deliverables, including management plans and case reports. Monitor and refresh environmental objectives and targets. Influence product lifecycle decisions regarding design, usage, and disposal. Assist in promoting sustainability within UK programmes. Collaborate with technical teams to provide evidence supporting environmental management strategies. Manage environmental meetings and audit activities. Basic Skills and Qualifications: Bachelor of Science degree in Engineering or related fields. Membership or pursuit of membership with a recognised UK environmental professional body. Experience in environmental management/engineering within regulated industries, preferably aviation. Knowledge of environmental law and industry standards. Excellent communication skills to convey technical information clearly. Proficiency in MS Office Suite. Collaborative mindset and team-oriented approach. UK National status required, eligibility for SC clearance. Desired Skills and Qualifications: Experience with environmental assessment techniques and risk analyses. Strong organisational skills to manage multiple projects efficiently. Environmental auditing experience. Benefits: Competitive salary Hybrid working options Opportunity for professional development Collaborative work environment Application Process: If you are passionate about environmental sustainability and meet the qualifications, we invite you to apply for this exciting opportunity. Join us in making a difference in the aerospace industry and supporting our mission to protect the environment. Work Authorisation: This position is for locally hired candidates in the UK. Applicants must have current legal authorisation to work in the United Kingdom. Conflict of Interest: Candidates must satisfy the organisation's Conflict of Interest assessment process. Take the next step in your career by applying today! Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you

Junior Embedded Software Engineer - £35k - £45k – Semi remote – Bristol Hexwired Recruitment has partnered with a unique Engineering company based Bristol, who are now seeking a Junior Embedded Software Engineer to develop a range of Arm based systems. The company are working with customers globally to develop novel solutions to a range of applications, utilising the latest technology available! You will be working as part of a dedicated Software team, developing a range of unique products used across a number of industries so this is an excellent opportunity for someone looking for a more varied role. This is a Junior Embedded Software role working on Realtime Systems and Arm Processors. If you have experience working on products from design to manufacture this is highly beneficial. Key Skills • 1+ years commercial Embedded C experienc, • Good commercial RTOS experience (FreeRTOS, SafeRTOS preferred, • Good experience working on ARM Processors, • Previous experience working on safety critical products is highly desirable but not essential The company are offering circa £45k dependent on experience along with an excellent benefits package. If you’re interested in this Junior Embedded Software role, please apply. For more information on this role, or any other jobs across; Embedded, C++ programming, Mechanical, CAD, Electronics, Hardware, FPGA, Power Electronics, AI, Embedded Linux, Golang Development, Machine Learning, Data Science or Simulation contact us today

Systems Engineer The Role: As a Systems Engineer, you will have the opportunity to work on a number of our projects helping to deliver solutions to our customers. In this role, you will be able to support technical systems engineering work, enhance your project management skillset and be involved in team leadership of junior engineers if this interests you. You will have opportunities to enhance your skills and capabilities in line with personal and business objectives. Day to day tasking can include: Delivering technical expertise on a variety of customer projects from air to sub-surface Supporting Systems Engineering activity across the design lifecycle Working with multidisciplinary teams Contributing to the development of proposals and statements of work Engaging with a range of internal and external stakeholders Key Skills Required: We are interested in any of the following skills, but they are not essential for you to apply: Requirements Capture, Management and Analysis Model Based Systems Engineering (MBSE) Systems Integration Verification and Validation Understanding of various types of SE documentation Knowledge of supporting toolsets (e.g. DOORs, JAMA, JIRA, Enterprise Architect, Cameo Systems Modeller, Rhapsody, MATLAB, Simulink) Benefits: Annual Company Bonus – Based on company performance 25 Days holiday not including bank holidays with the option to buy/sell up to 5 days Flexible hybrid working arrangements Continuous professional development including incentives Access to online Udemy training facility to support grade specific learning pathways Electric car scheme Bike to work scheme Private health care (BUPA) Job well done scheme Employer assistance scheme About Us: Synoptix was formed in 2011 to provide engineering solutions across various technical industries. We have evolved from a company established and focussed on Systems Thinking principles into an Engineering company providing solutions and services across three key capabilities: Systems, Cyber & InfoSec and Technology. What makes us stand out is how we engage in the crossover areas between these disciplines, combining our strengths to provide a truly bespoke, market leading approach. Our engineering competence is bolstered by expertise in commercial, legal, financial and resource, thereby ensuring that we uphold excellence in our product and service offerings. Please note that due to the nature of our projects we can only accept Sole UK National candidates who will need to be eligible to obtain UK Security Clearance. By applying to this position, you are confirming that you consent to the retention of your personal data. Your data is held securely on our own premises and under the terms of the Data Protection Act (2018). It will be treated as confidential, and will not be transferred to any third party, or to any other jurisdiction without your consent. We will not hold any data for any longer than is necessary for us to fulfil our obligations and will remove any data at your written request

Bristol Want to work for growing team with the motivation to excel and a good team spirit? Where you will have the opportunity to apply your experience and passion for navigation sensor technologies to support the development of some of the most advanced missile systems in the world? If so, keep reading! Salary: Up to £57,000, depending on experience Dynamic (hybrid) working: 3 days per week on-site due to workload classification Security Clearance: British Citizen Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: Navigation sensors are a critical technology for missile systems and therefore the team has frequent exposure to high-profile, fast-paced projects with rewarding opportunities. The team is very closely linked with the navigation sensors team in MBDA France with associated travel opportunities. You will carry out specification and assessment of navigation sensors including GNSS receivers, anti-jam units and inertial measurement units. You will monitor supplier and technology roadmaps to identify cutting edge technology for investment, support sub assembly and equipment assessment trials, and undertake research activities as part of an international team. This role offers you the opportunity to be part of a successful team working to develop new and innovative solutions to address complex customer requirements, develop expertise in navigation sensors, take on a key role in several multi-national research programmes, as well as the chance to challenge yourself technically. What we're looking for from you: An experienced defence or aerospace engineer, with a degree in electronic engineering, physics, or similar Technical knowledge in navigation systems, avionics, or RF engineering Project management, delivery, and commercial awareness highly desirable Modelling skills including proficiency with tools such as MATLAB and/or Simulink would be advantageousThe ability to gain an understanding of the following: A detailed understanding of all aspects of GNSS functionality, multi-constellation technology and system integration Detailed knowledge of receivers, anti-jam and CRPA's GNSS system chain performance & integration challenges GNSS jamming and spoofing experience Inertial sensor specification and characterisationOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Disability, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-CT1

My Client is recruiting for a Technical Director - Clean Water Process Engineering The Design & Advanced Technology (D&AT) Practice is seeking a Technical Director for Clean Water Process to join our team in the UK. We are looking for an energetic and experienced Clean Water Process Engineer that can both lead as technical expert in water treatment and driving forward business results. We specialise in all aspects of process engineering within the Water Sector, including water, waste water and bioresources in the UK and internationally. Process Engineering project opportunities also stretch to other sectors such as nuclear and defence. We're committed to providing industry-leading engineering solutions right through the project lifecycle from feasibility to process commissioning, with value added through client-side support as well as construction phases. As a key member of our technical leadership team, you'll play a vital role in shaping and delivering transformational programmes of critical UK infrastructure for our Water market clients - clients like Thames Water, Anglian Water, Environment Agency, Welsh Water, United Utilities, Scottish Water, and more. By providing technical leadership across the organisation you'll drive results, by contributing to functional strategy, influencing senior stakeholders, and leading within the process group and multidisciplinary project teams, to deliver measurable outcomes. In this role, you will set direction for complex, high-impact projects and initiatives, anticipate business and regulatory challenges or changes, and develop innovative solutions and offerings that move the business forward. Being a Technical Director with us involves UK wide travel. We offer hybrid working which involves 3 days per week travel/office based. This position can be based at any of our main locations: Surrey, London, Bristol, Exeter, Birmingham, Manchester, Newcastle, or Glasgow. It can also be based in our other offices but may require additional travel to main locations as needed: Peterborough, Cambridge, Cardiff, Swansea, Derby, Leeds, Belfast, Edinburgh. Your role As a Clean Water Process Technical Director in the D&AT Practice, the successful candidate would have the following responsibilities: Provide Technical Leadership within discipline for the national D&AT practice. Influence D&AT Practice wide initiatives and recommend best practices to improve internal process and services. Serve as a recognised expert and technical authority in Clean Water Process Engineering across the D&AT Practice and wider business. Provide visible representation of your and Company's Clean Water Process Engineering technical expertise to our current and prospective clients. Collaborate with stakeholders at all levels, including internal and external clients, operational staff, project teams, or external stakeholders. Recommend and drive improvements to processes, services, and technical practices while ensuring robust engineering governance is consistently upheld. Oversee technical input into bid proposals, defining the delivery strategy and working with cross‑functional teams to prepare high‑quality, compliant, competitive submissions. Proactively identify opportunities for cross‑selling and business growth, using commercial insight to strengthen and expand client relationships and selling our value proposition to clients. Grow, develop, and manage the Clean Water Process engineering capability within the national practice, supporting talent development and succession planning. Anticipate emerging business, regulatory, and technology challenges, identifying risks and opportunities early and advising senior leadership. Provide strategic oversight across multiple complex, multidisciplinary projects, ensuring technical excellence, safe delivery, and alignment with client and practice objectives. Work independently even in the most challenging situations. Act as the point of escalation for the most complex technical matters and exercise personal judgement to find solutions. Experience and Qualifications: The ideal candidate would be a well-rounded and versatile individual who exemplifies the following key skills and attributes: A degree in Chemical Engineering or equivalent (e.g. Environmental, Water Engineering, etc.) Chartered Engineer (preferably IChemE or CIWEM). Extensive experience in progressively senior technical roles, including significant leadership of complex, high‑risk, cross‑disciplinary projects and programmes. Nationally or international recognised subject matter expertise in clean water treatment process and principles - conventional and advanced treatment technologies. Drinking water expertise would be essential. Experience in the UK Water market is essential. Expert knowledge of current design codes and standards as well as industry best practices including, including CDM Regulations. Extensive experience of design and delivery of projects with adherence to UK safety and environmental regulations, process safety techniques (e.g. HAZOP), knowledge of capital and operational costs - and risk assessments, as well as whole life carbon assessments. Commercially astute, with experience shaping winning proposals and driving practice and business growth. Champion continuous improvement, driving enhancements to processes, services, technical standards, and innovation across the practice. Demonstrates strong communication skills, with the ability to convey complex ideas with clarity, anticipating challenges and persuading senior stakeholders to adopt new perspectives, and navigate diverse, international and cross-cultural delivery. Demonstrable comprehensive knowledge in leading treatment process design and integrating elements as part of an existing or new treatment process with experience across all design phases, including construction. Experienced in identifying and promoting innovative solutions, challenges the status quo

Bristol As an Algorithms Engineer, you will have the opportunity to work on advanced technologies and create solutions in the field of Radio Frequency (RF) Seekers! Salary: Circa £45,000 to £58,000 depending on experience Dynamic (hybrid) working: Typically 4 days per week on-site, due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: Maximum total (employer and employee) contribution of up to 14% Overtime: Opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: Offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... The opportunity: We have a number of exciting opportunities for various levels of experienced Systems Engineers to join our growing Radio Frequency (RF) Seekers team. You'll be performing activities including algorithm development and systems studies. This is an exceptional chance to be part of multiple Seeker programmes, including STRATUS - LO and Brimstone, and contribute to the development of Active Electronically Scanned Arrays (AESA) and highly integrated multi-mode sensors. What makes this opportunity truly unique is the scope it offers for innovation and technical growth. You will have the chance to get involved in a variety of systems tasks, driving the technical scope of the programmes. As part of our specialist and diverse team, you will have many opportunities to develop your skills, and be fully supported in doing so. We are looking for individuals who are passionate about the industry and technology, and we are committed to helping you build a successful career while working with incredible technologies and products. As part of the role, you will be involved in a number of activities including many of the following: Develop algorithms and ensure they are fit for purpose Conduct studies to identify any enhancements and propose future improvements Collaborate with individuals from various areas of expertise Integrate algorithms within complex Seeker models Undertake system studies and performance analysis Foster innovation, including the use of agile methods, process improvements, and machine learning/AI in our products What we're looking for from you: Essential experience: Algorithm development MATLAB Experience Identification, Planning and Running of investigations to inform systems design Data analysis Desirable experience, but not essential: Modelling and coding (Simulink) Knowledge of RF systems and digital signal processing Experience in forming hypotheses and creating the method to prove them. Technical report writing Machine Learning and AI Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SF1

Bristol SPEAR 3 EMC Proving Engineer Are you a hands-on engineer with an eye for detail, passion for electro-magnetic compatibility testing, ready to prove the performance of cutting-edge defence technology? Join a dynamic team where you'll be proving Weapon System products in extreme environmental conditions. Salary: Circa £50,000+ depending on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification. Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Security Clearance (SC) checks which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more.The Opportunity The Integration and Missile Validation department is looking for a talented engineer to join our mission to achieve the Certificate of Design for a new UK Weapon System. You will be instrumental in demonstrating that the SPEAR 3 Weapon is fit-for-purpose and operates flawlessly even in the most extreme electromagnetic environments. SPEAR 3 is an important Weapon System programme advancing through the first customer capability requirement and also on to new variants for additional UK and export platforms. Reporting to the Ground Trials Proving Lead, you will be responsible for planning, conducting and reporting on trials across the full design lifecycle, including product de-risk, demonstration and qualification. You will: Design trials: Design functional test setups and specify the necessary instrumentation and stimuli to accurately capture data during trials. Prepare for trial: Lead or support trials readiness reviews, ensuring all test hardware, software, and facilities are prepared and all aspects, including safety, are assessed and documented. Coordinate: Manage and coordinate all aspects of the Weapon subsystem or system under test, securing timely availability and logistics of all hardware, software and test equipment required. Execute tests: Be hands-on in supporting the physical test setup and work-up of formal Qualification and investigations within in specialised facilities, such as EMC anechoic and reverberation chambers. Record comprehensively: Produce accurate logs of all proving activities, raising issues in a timely and detailed way. Analyse data: Record and meticulously analyse trial data to support the verification that the system meets its stringent requirements. Report findings: Author comprehensive trial conduct reports to support the product's development and certification. Support certification: Provide critical data and reports to support the formal certification of our products for use. Interface: Act as the primary engineering interface between the project team and the test facilities, with deep knowledge of how the product operates in the full range of intended RF environments. Communicate: Ensuring seamless coordination and information flow throughout the trial. Develop Capability: Within the IMV department, there will be opportunities for passionate individuals to support and lead the development of specialist EMC proving capability, developing competencies and driving results.This role will reward individuals who enjoy hand-on testing of products in physical environments, such as vulnerabilities to and emissions of RF and electrical energy. The role is predominantly based on site, especially whilst running trials campaigns using MBDA's industry-leading EMC facilities in Bristol, with occasional travel required when using external test houses. This role could be based at Bristol with some travel to Stevenage for some of the work up and planning. Proving our products in the EMC environments is a key competency that the IMV department is keen to develop and elevate as a specialism. This presents an opportunity to grow within this role and shape the way MBDA proves missile equipment both now and for the future. What we're looking for from you: Essential A practically minded and hands-on engineer with a passion for testing systems. An understanding of EMC and RF behaviour, vulnerabilities and test methods. A keen eye for detail and a methodical approach to planning, executing, and documenting technical activities. Excellent communication skills to effectively interface with technical experts, facility personnel, and management. Confidence in processing, analysing, and reporting on complex technical data. An inquisitive nature and a creative approach to problem-solving to derive logical solutions, particularly in complex and challenging scenarios. A dynamic and proactive individual who can manage their workload Someone who is looking for a new challenge/opportunity, with a growth mindset and ability to shape, improve and progress test and proving approaches and methodologies.Desirable Application of military standards to testing products e.g. Def-Stan 59-41/59-511, AECTP500, MIL-STD-461. Higher education or strong knowledge in: Electronics, Electrical, RF, Physics, EMC or similar. Experience of using test facilities and equipment to replicate environments such as conducted emissions and vulnerabilities.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-KF1

Are you prepared to join an outstanding team that is at the forefront of advanced technology? If you are a driven and experienced engineer looking for a chance to contribute to top-tier Laser Directed Energy Weapon (LDEW) systems, then we have the ideal position for you! Salary: Circa £48,000- £53,000 depending on experience Dynamic (hybrid) working: 2-3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The Opportunity: The role of the Electrical Architect is to co-ordinate the overall electrical functionality, electrical performance and electrical constraints of the DragonFire system and to be the technical interface with the Design Authorities (external or internal) of weapon system equipment in order to ensure the consistency of the weapon system equipment with electrical architecture. The Electrical Architect will need to coordinate with both internal and external suppliers to ensure technical choices, are in accordance with the architecture. This is a varied role ranging from developing requirements with stakeholders, spending time in a design lab and supporting the acceptance of our Weapon System products. The Electrical Architect will be responsible for electrical requirements across the project and to support the delivery of MBDA equipment As an Electrical Architect, your main responsibilities will be: Manage technical interface with the Equipment Design Authority, including acceptance of the equipment delivery Support equipment integration at the system level Manage the Statement of work (SOW) of the equipment. Lead the technical progress meetings and milestone reviews with the supplier Understand sub-contractor management both internal and external Understand and contribute to the key activities in the engineering development lifecycle such as design reviews (PDR/DDR/CDR) Manage schedule, cost, quality and performance metrics for assigned work packages Work within a multi-discipline engineering team (e.g. Systems, mechanical, electrical, software etc...) Understand the benefits of re-use versus new development Limit technical risks through application of mitigation strategies Awareness of electrical regulations and standardsThe following would be useful, but not necessarily essential: Knowledge of systems engineering principles, processes and practices Appreciation of requirements engineering at System, Subsystem or Component level Knowledge associated with the design and build of maritime electrical systems Awareness of test procedures required to verify products and the gathering of evidence to enable certification. Confidence in presenting technical engineering information and promoting decision making Experience of technical report writing and use of configuration management tools Practical experience of electrical circuits, wiring, and installation.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-KF1

Maintenance Engineer £40,000 - £45,000 Monday - Friday Days Avonmouth A new and exciting opportunity has arisen for an Maintenance Engineer to join an excellent new processing facility in the Avonmouth area. With no day ever being the same the Maintenance Engineer role offers genuine long-term progression and career development within a first-class processing environment. Role & Responsibilities: Inspect, maintain, and repair mechanical, electrical, and pneumatic systems. Troubleshoot PLC systems and interpret technical diagrams. Perform welding, fabrication, and component replacements. Use CAD for design and mechanical analysis. Plan maintenance schedules and coordinate assemblies. Ensure workplace safety and regulatory compliance. Maintain logs, reports, and confidentiality of company data.Knowledge, Skills & Experience: Mechanical and PLC fault diagnosis (Siemens, Allen-Bradley) Welding, fabrication, and technical diagram interpretation CAD drafting and mechanical calculations Problem-solving, teamwork, and attention to detail Knowledge of UK health & safety regulationsPackage and Benefits: £45,000 Monday - Friday Days Exceptional long term career progression opportunities If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business

Bristol We have a fantastic opportunity for an RF Design engineer to work on the research, design and testing of cutting-edge radio-frequency technology for integration into our complex weapons systems. Job Title: RF Designer Salary: Circa £65,000 depending on experience Location: Stevenage (We may be able to offer a relocation package for this role) Dynamic (hybrid) working: Where possible, we will seek to accommodate a blended approach to on-site and remote working - such as being onsite when necessary to work with people and collaborate, then working from home and around family commitments to be your most efficient. Typically for this role you will work 3-4 days per week on-site due to workload classification. In addition, this role could be full time or part time in order to meet your needs. We are flexible and accommodating. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: Maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. Facilities: Fantastic site facilities including subsidised meals, free car parking and much more.The opportunity: We're looking for an RF Design engineer with proven practical design experience for cutting edge defence products. You'll be working on the research, design and testing of cutting-edge radio-frequency technology for integration into our complex weapons systems, with a focus on utilising your hands on experience to carry out modifications or rapid prototypes where required. We need a team player who can use their initiative and has a real passion for electronic engineering. The role would ideally suit someone who is comfortable carrying out hands on testing and modifications to boards while having a strong background in RF design. What we're looking for from you: Proven practical RF (component level) design and testing of RF circuits across a wide frequency range ( eg, 30MHz to 30GHz, including LNA Amplifier, High Power Amplifier, filter, local oscillator, synthesiser, modulator design etc) RF design experience for harsh environments (EMC, vibration, thermal) Ability to perform design proving tests and trials in the onsite laboratory Excellent practical skills including soldering, fault finding and the use of RF test equipment including Spectrum Analysers, Power Meters & VNAs Good knowledge of digital, analogue and power supply design Experience using RF design tools ( eg Microwave Office), including layout. Fully conversant with manufacturing techniques and capabilities, including design for manufacture and test. Strong communicator with excellent presentation and report writing skills and the ability to communicate clearly any problems, solutions or results to the team and customer.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

New Contract Opportunity – Bristol (Outside IR35).A Bristol-based client has reached out with an exciting opportunity to work on next generation wireless technlogoy specifically for high speed data tranfer.You’ll be working on advanced, high-speed fibre data transfer projects, developing in.Stro

Provn are proud to be partnered with a boutique systematic hedge fund as they look to hire a Software Engineer to join their Middle Office Technology team in London. Software Engineer – Middle Office Technology. The ideal candidate combines strong engineering fundamentals with a pragmatic, ownersh

An opportunity has arisen for an Installation Engineer to join a leading innovative communications provider for critical solutions, on a remote working basis. As a Installation Engineer covering the Beds, Herts, Bucks and Northamptonshire areas specialising in the installation of Two-Way Radio or Pa

Field Engineer (Highways Technology). We are currently recruiting a Field Engineer role to maintain the technology on motorways and trunk roads around the Gloucestershire, Somerset and Wiltshire areas. Are you a Field Engineer/Technician with an electrical, comms or electronics background?.

This is a high-impact role suited to engineers who enjoy working on complex, data-intensive systems, combining strong software engineering with analytical problem-solving in a front office-aligned environment. Software Engineer – Risk Technology. Provn are proud to be partnered with a leading syst

IT Project Engineer – £35,000 to £50,000 – Eastleigh. Are you an experienced IT Project Engineer looking to take ownership of varied, high‑impact technical projects? Do you thrive in a fast‑paced MSP environment where no two days are the same? If so, this role could be the perfect next ste

Due to project demand, they are looking for a C# Software Engineer to join their small engineering team, contributing to the development of core application software used in real-time audio control. To apply for this remote C# Software Engineer role, apply now!. We are working with a specialist tech

Computer Science, Software Engineering, Electronic Engineering, or a related field. AYES is looking for a Software Engineer. SW development, embedded systems, and software engineering.

You can engage with commercial requirements, ask the right questions and make technical decisions that align with business goals, not just engineering preferences. Senior Software Engineer (Python/Django). We’re looking for a Senior Software Engineer who can own the full stack and who's capable of

Senior Manufacturing Engineer (Aircraft Assembly & Systems Integration). Extensive aerospace manufacturing engineering experience. Strong IT and digital engineering tool experience.

Job Title: Consultant Materials Engineer (Metallurgy) Location: Barrow-in-Furness Onsite.

Drainage Engineers and Tanker Operators wantedWere excited to announce that Drain Technology (UK) Ltd will be opening a brand-new depot in Cardiff on 2nd April and were now recruiting!As part of our continued growth, we are looking for experienced, motivated individuals to join our expanding team.

Design Engineer - PAVA SystemsLocation: Warwick (Haywood Road) - Agile WorkingType: Permanent, Full-time (37. Telent's Network Services division are now looking for a PAVA Design Engineer to join the HPC and Sizewell C programme team.

System Engineer - CCSDS & LunaNet (LLD Focus)OverviewWe are seeking aSystem Engineer with strong CCSDS and LunaNet experienceto support thedetailed design and implementation of space communication architectures.

Highways Installation EngineerReporting to the Regional Manager (South), the successful Highways Installation engineer will be responsible for the installation, testing, and maintenance of a range of highways technologies and associated equipment.

Maintenance EngineerHighways TechnologyHome CountiesUpto £55k including Shift Allowance and OvertimeVan + Fuel + 25days Holiday plus BHRole OverviewA position is available for a maintenance engineer to support the installation, commissioning, and upkeep of roadside technology across the motorway ne

Principal EngineerWhen you join our Engineering Team at Telent, you'll be empowered to innovate and drive common solutions, working closely with technical experts who are proud of the impact their work makes.

Are you an experienced Electronics Design Engineer, who is looking to work in a fast paced, global, market leading company? Here at Innovative Technology, we have an excellent opportunity for an experienced Electronics Design Engineer to join our site-based Electronics team at our global head office

This is a truly unique opportunity to join a small, highly specialised tech business, working on genuinely cutting-edge hardware used by global technology companies, yet located in one of the most beautiful locations on earth.

Location: Bristol; Hybrid Join us at Smartbox as a Firmware Engineer! Are you a passionate Firmware Engineer looking to make a real impact by giving a voice to those without speech Smartbox is looking for a dedicated individual like you to join our team and contribute to enhancing the lives of peopl

F5 Resident EngineerThis role is primarily remote, with occasional on-site attendance required at locations in southern cities. The engineer will act as theday-to-day operational ownerof the F5 estate, covering BAU operations, incidents, changes, and lifecycle support. Engineer Re

We are Blue Chip Technology, an Employee Owned company. We are looking for a hands-on Electronics / Hardware Engineer to design and develop microcontroller and application processor-based embedded systems.