Trabajos Engineering en Newton AycliffeCrear alertas

An excellent opportunity for an experienced Multi Skilled Service Engineer to join a well-established company. \n \n Job Type: Full-Time, Permanent \n Salary: Up to £40,000 Per Annum (OTE £45k) Depending on Experience \n Location: Shildon, County Durham DL4 \n Working Hours: 37.5 Per Week - (09:00am – 17:00pm) \n Holiday Entitlement: 33 Days (25 plus statutory bank holidays) \n \n All hours additional to the 37.5 are paid at overtime rate of 1.5X. \n \n About The Company: \n \n They are a UK leading organisation specialising in the Manufacture, Installation, Service & Maintenance of Purified Water Systems predominantly for the Pharmaceutical, Medical Devices and Health & Beauty industries throughout the UK. This is an excellent opportunity for a Multi Skilled Service Engineer to join the company, supporting multiple projects within our manufacturing facility based in Shildon, Co Durham. \n \n About The Role: \n \n As a suitably qualified and experienced Engineer (Mechanical and or Electrical/ Instrumentation) you will be based at the Manufacturing facility in Shildon, County Durham, or you would be attending routine installs and service visits at client sites throughout the UK. You would be part of a growing team although you may also be required to work unsupervised so similar experience/ competency will be necessary. \n \n Typical work would involve conducting commissioning and maintenance activities such as; Instrumentation Setup and Calibration, Reverse Osmosis Membrane & Filter replacement, Mechanical Disassembly of Pressure Vessels such as WFI/ PSG chambers, Chemical Cleaning as well as Mechanical Rotating Equipment and Electrical & Instrument troubleshooting and repairs (12VDC – 415VAC). All works are carried out in accordance with an approved method statement with on-the-job training included with the role. \n \n \n Candidate Requirements: \n \n The ideal candidates come from an Engineering / Electrical / Process/ Chemical / Services background with previous experience and knowledge of Pharmaceutical Process Equipment including Purified Water Systems such as; Pre-treatment, RO/EDI, WFI Distillation, Plant & Clean Steam Generators, being considered a distinct advantage. Specialist product training will be provided for the right person. \n \n Due to the location of client sites, frequent travel will be required with this role. This is typically travelling early Monday morning and returning Friday afternoon or sooner. Occasional Sunday travel is required for clients. All expenses are paid and additional working hours including travel will be paid at overtime rate. Saturday and Sunday shifts are subject to additional uplift payments on top of overtime hours. \n \n Candidates should have a minimum of 5 years’ experience with supporting qualifications (NVQ 3/HNC/HND) and be willing to demonstrate competence. A valid Driving license is also required, and the successful candidate will have use of a company pool vehicle for site works. For site works, a company pool vehicle and fuel card are provided and all accommodation, food and drinks are paid for. \n \n \n If you feel that you have the relative skills/attributes to fulfil this role then please apply now for immediate consideration. \n \n \n The company is an Equal Opportunity Employer that does not discriminate based on race, religion, sexual orientation, age or disability. The employer welcomes applications from all candidates who match their requirements and their decision for employment will be based purely on your skills/qualifications. \n \n

MTrecs new career opportunity \n Our client are specialists in their industry sector, they are looking to recruit an Mechanical Maintenance Engineer on a permanent basis. \n The role will be working a Panama shift where you will work 7 days out of every 14 days. \n The shift pattern is 2 weeks of days (6.30am to 6.00pm) then 2 weeks of nights (6.30pm to 6.00am). \n The Job youll do \n\n • As a Mechanical Maintenance Engi...\n\n \n ZIPC1_UKTJ

Multi-Skilled Maintenance Engineer \n Location: Newton Aycliffe Salary: £41,500 per annum Shift Pattern: 3 Shift Rotation (Monday-Friday) \n The Role \n A leading manufacturing business based in Newton Aycliffe is looking to recruit a Multi-Skilled Maintenance Engineer to join its established engineering team. \n This is an excellent opportunity for an electrically or mechanically biased engineer who enjoys working in a fast-paced manufacturing environment, carrying out both reactive and planned maintenance to ensure maximum machine uptime. \n Responsibilities \n\n • Carry out planned preventative maintenance (PPM).\n, • Respond quickly to equipment breakdowns and minimise downtime.\n, • Diagnose and repair electrical and mechanical faults.\n, • Work on continuous improvement projects to increase reliability and efficiency.\n, • Ensure all maintenance work is completed safely and in line with company procedures.\n, • Maintain accurate maintenance records using the CMMS system.\n, • Support production to maximise plant performance.\n\n Requirements \n\n • Recognised Engineering Apprenticeship or Engineering Qualification (NVQ Level 3/C&G or equivalent).\n, • Multi-skilled with electrical and mechanical maintenance experience.\n, • Previous experience within a manufacturing or industrial environment.\n, • Strong fault-finding and diagnostic skills.\n, • PLC fault-finding experience would be advantageous.\n, • Ability to work independently and as part of a team.\n\n What's on Offer? \n\n • Salary of £41,500.\n, • Monday-Friday 3 Shift Pattern.\n, • Stable, well-established manufacturing business.\n, • Ongoing training and development opportunities.\n, • Pension scheme.\n, • Holiday allowance.\n, • Long-term career progression.\n\n If you're a Multi-Skilled Maintenance Engineer looking for your next opportunity in Newton Aycliffe, we'd love to hear from you. Apply today to find out more.

The Rewards and Benefits on Offer: \n\n • Immediate start available\n, • A competitive basic salary and benefits package\n, • Permanent job from day one\n, • Free on-site parking\n, • Competitive holiday allowance\n\n Working Hours: \n\n • Dayshift\n, • Full-time, Mon - Fri\n\n MTrec’s New Opportunity: \n MTrec Recruitment are proudly representing our specialist manufacturing client in their recruitment for a Production Team Leader. The role will lead a team of skilled operatives and oversee the day-to-day operations of the business covering the day shift. \n If you meet the person specification below, apply now for an immediate response! \n The Job you will do: \n\n • Develop and maintain product assurance systems to meet IATF 16949 and customer-specific requirements.\n, • Lead a culture of defect prevention, continuous improvement, and waste reduction.\n, • Apply core quality tools including SPC, Pareto, histograms, scatter diagrams, and stratification.\n, • Support manufacturing teams in the timely resolution of internal and customer quality issues.\n, • Support NPI activities including APQP, PPAP, PFMEA, Control Plans, gauge planning, and capability studies.\n, • Incorporate lessons learned to identify and prevent potential failure modes.\n, • Conduct internal audits and promote compliance with company systems, procedures, and quality requirements.\n, • Analyse and communicate quality/process data to senior management and drive improvement actions.\n, • Programme and perform routine CMM measurements and support NPI measurement capability studies.\n, • Support the Quality Manager in coordinating Quality Engineers and Laboratory Supervisors.\n, • Liaise directly with customers and suppliers to investigate and resolve quality concerns.\n\n About you: \n\n • Experience working as a Quality Engineer or similar within an engineering/manufacturing environment\n, • An understanding and knowledge of IATF 16949 standards\n, • Proven leadership capability with strong communication and interpersonal skills.\n, • Effective resource planning and prioritisation, managing competing demands and multiple deliverables.\n, • Strong knowledge and experience in developing PPAP documentation, including PFMEA and Control Plans.\n, • Practical experience applying quality tools and techniques, including 8D analysis and Poka-Yoke.\n, • Proven ability to lead, motivate, and collaborate with cross-functional teams to achieve business and quality objectives.\n

The Rewards and Benefits on offer; \n\n • Highly competitive starting salary\n, • Monday Friday working hours promoting a healthy work/life balance\n, • Permanent opportunity from day one!\n, • Immediate start date\n, • Friendly and supportive working environment\n, • Continuous improvement and development opportunities\n\n Working Hours; \n\n • Mon-Thurs 8am-5pm, Fri 8am-12:30pm\n\n The Company you will be working with; \n MTrec Commercial are proudly re... \n \n ZIPC1_UKTJ

MTrec’s new career opportunity \n Our client are specialists in their industry sector, they are looking to recruit an Mechanical Maintenance Engineer on a permanent basis. \n The role will be working a Panama shift where you will work 7 days out of every 14 days. \n The shift pattern is 2 weeks of days (6.30am to 6.00pm) then 2 weeks of nights (6.30pm to 6.00am). \n The Job you’ll do \n\n • As a Mechanical Maintenance Engineer (known as a Mechanical Fitter internally), you will be part of an in house engineering team that keeps production running safely and reliably.\n, • You will work hands on with plant and equipment, supporting planned maintenance and responding to breakdowns to help maintain consistent output and quality.\n, • Duties also include:\n, • Diagnosing and repairing mechanical faults on production equipment.\n, • Supporting safe and efficient operation of specialist machinery.\n, • Working with hydraulic, pneumatic and drive chain systems.\n, • Replacing and aligning bearings.\n, • Supporting fabrication and welding tasks where required.\n, • Working closely with colleagues to minimise downtime.\n\n About You \n Essential \n\n • Mechanical engineering background with good experience in manufacturing environments.\n, • Level 3 qualification in a mechanical engineering discipline.\n, • Strong commitment to health and safety best practice.\n, • Good communication skills, written and verbal.\n, • Ability to work flexibly in a busy, hands-on environment.\n, • Experience of fault finding on hydraulic, pneumatic and drive systems.\n\n Desirable \n\n • Completed a hands on apprenticeship.\n, • HNC or HND qualification or equivalent.\n, • Experience in heavy manufacturing industry.\n, • Arc and MIG welding or basic fabrication skills.\n, • Experience with electrical control systems.\n\n The Rewards and the Benefits \n\n • Weekly paid.\n, • Annual earnings are circa £48,000 (inclusive of allowances and bonuses).\n, • Overtime is available to increase earning potential.\n, • Support is there when you need it through our employee assistance and wellbeing programmes.\n, • This includes a 24/7 online GP, access to counselling, mental health support, and get-fit programmes.\n, • Health and wellbeing benefits include dental cover, a health cash plan, and eye tests.\n, • Financial advice and support are available, including expert guidance from our pension provider and help with savings and loan options.\n, • Discounts are available with a range of retailers, gyms, and client products.\n, • Life assurance is provided at twice your annual salary.\n, • You can join company Share Incentive Plan and our Employee Profit Participation Programme, so you share in our success.\n

Role: Maintenance Engineer / Maintenance Technician \n Salary: £43,000 to £46,500 per annum, plus benefits and further training and up-skilling opportunities \n Hours: Monday to Friday, rotation of earlies, afternoons and nights - 6am till 2:30pm / 2pm till 10:30pm / 10pm till 6:30am \n Location: Commutable from Spennymoor, Durham, Darlington, Staindrop, Sedgefield, Bishop Auckland and surrounding areas \n Company \n We are actively recruiting for a Maintenance Engineer, either Mechanical, Electrical or Multi Skilled, to work within a large international company at one of their leading factories. You will benefit from opportunities to enhance your learning and growth by taking advantage of the internal and external training on offer, to become a better and more rounded electro-mechanical engineer. It is to work in a small team of 8 Engineers, 2-3 per shift, dealing with a variety of work - planned maintenance, respond to breakdowns, complete various projects and installations. \n If you are a qualified engineer with experience of maintenance or service work in a machinery environment where you can be given genuine opportunities to grow, look no further and apply now! \n The Role \n Responsibilities include undertaking planned maintenance, reacting to breakdowns, delivering equipment upgrades, new installations and infrastructure changes, together with building maintenance as & when required. \n This is a multi-skilled environment, however either bias is welcome as help and training is offered. \n Requirements \n\n • A background in Maintenance engineering in any environment, such as industrial, facilities, FMCG, building services or similar type production/manufacturing environments.\n, • Have completed a recognised engineering apprenticeship or hold engineering qualifications ie. NVQ or C&G Level 3 in mechanical, electrical or multi-skilled.\n, • Enjoy good maintenance and troubleshooting skills across some of the following; motors, belts, bearings, chains, gears, boilers, pumps, inverters, sensors, relays, contactors, 3 phase motors, PLC’s, pneumatics, hydraulics or similar.\n, • Either mechanical, electrical or multi skilled with the willingness to learn and be part of a great small team\n\n If this role within a superb team of likeminded engineers sounds of interest, please apply now and send your most up to date CV to Jane at TechNichols Resourcing to be considered. Or call TechNichols Resourcing and speak with Jane for further information. \n We will endeavour to get back to all applicants but if you have not heard back within 5 working days unfortunately your application has been unsuccessful.

Fuel your future with AO – and unlock serious earning potential. \n We’re all about making work, work for you. With a shift pattern designed for real life, you’ll have the flexibility you need to keep everything in balance. \n As one of our Gas Engineers, you’ll stay in control of your own Gas Safe card while enjoying a reliable, steady income you can depend on. \n And the best bit? The rewards. You can earn: \n\n • Up to £2,000 in performance bonuses.\n, • A £4,000 welcome bonus just for joining the team.\n, • Plus, the chance to boost your earnings with overtime averaging up to £3,000 a year.\n\n It’s everything you need to power your career forward, with a team that’s got your back every step of the way. \n Here's What You Can Expect To Be Doing As Our Gas Installations Engineer: \n As an AO Gas Engineer, you’ll head out on the road with one of our drivers, visiting customers in their homes and bringing their appliances to life. You’ll be installing gas and electrical products safely and efficiently — no repairs, no guesswork. Just high-quality installs and top-notch customer service, every single time. \n A Few Things About You: \n You’ll need to have: \n\n • A full UK driving licence with no more than 6 points.\n, • CCN1 & CKR1 qualifications.\n, • To be over 21 for insurance purposes.\n, • At least 1 years’ experience in gas installations.\n\n It’d be great if you also have: \n\n • Some experience installing electrical appliances (but don’t worry — we’ll give you all the training you need to get up to speed.\n\n Our Benefits: \n What’s in it for you \n At AO, we’ve designed our benefits to make life easier, inside and outside of work: \n\n • A 4 on, 4 off shift pattern with 24 days holiday — you’ll work less than half the year.\n, • A company van with fuel paid for, so you’re ready to go from day one.\n, • On-call support from our expert technical team whenever you need it.\n, • Access to fantastic training facilities with ongoing development opportunities.\n, • A competitive pension scheme.\n\n Plus, a great range of everyday perks: \n\n • Simply Health cash plan to help cover healthcare costs.\n, • Help at Hand — access to a 24/7 GP and wellbeing support.\n, • The option to buy extra holidays for even more flexibility.\n, • A cycle to work scheme to support a healthier commute.\n, • Wage stream access, putting you in control of your money every step of the way — access your earnings when you need them, not just on payday.\n, • Exclusive ticket access to AO Arena, Sale Sharks and Manchester Thunder.\n\n And that’s not all — there’s plenty more to discover when you join the team. \n Location: Western Industrial Estate, Westerton, Bishop Auckland, DL14 8AH \n Click ‘Apply’ now to join our family and find out more about the Gas Installations Engineer role.

We are working with our client who are a successful Manufacturing company based in Bishop Auckland in the search for a Design Engineer \n \n You will be a key member of the design team and be responsible for the development of bespoke products from concept to production. Experience working with machined products is preferred. \n This red is a fantastic opportunity to join an established global business with fantastic benefits and progression opportunities \n \n Responsibilities \n\n • To develop the company’s core business activities and ensure compatibility with operational procedures\n, • To work with the Technical Manager and Quality Manager to support and improve existing products and developing new products in order to expand the company’s range providing support to all functions within the organisation\n, • To design and manage the engineers working on machined products developing engineering core business activities ensuring compatibility with the company operational procedures\n, • To undertake timely conversion of enquiries into development samples adding new complimentary product lines to broaden the company’s offering and collating new supplier pricing to enable realistic profitable price estimates\n, • To locate, where appropriate, evaluate and work with new suppliers to improve the technical function or processes used by the company in the manufacture or testing of its products\n, • To provide technical support directly to customers, suppliers and the sales team. This may from time to time involve some travel within the UK as well as overseas\n, • To utilise and maintain 3-D Solid Works computer aided design (CAD) system in conjunction with Manufacturing Resource Planning System (MRP) to effectively manage products including, but not limited to, bills of material, assembly drawings and detail drawings\n, • To liaise, where appropriate, with the Quality Manager, Operations Manager and CEO to optimise product designs, quality and to minimise costs\n\n \n The person: \n\n • Degree / HNC or similar equivalent in mechanical engineering\n, • Solidworks experience\n, • Experience with FEA and analysis preferred\n\n \n The package: \n\n • Excellent progression and training opportunities\n, • Permanent full-time position\n, • Excellent Pension\n, • 38-45k DOE\n\n

Yield and Integration Engineer – County Durham – Newton Aycliffe – Semiconductors Bluegate are working with a leading British semiconductor manufacturing company based in Newton Aycliffe, supplying high-reliability products to the defence industry. As part of their continued growth, we are seeking a Yield and Integration Engineer to support process optimisation, product performance, and manufacturing excellence. As a Yield and Integration Engineer, you will play a critical role in improving device yield, supporting process integration projects, and driving continuous improvement across wafer fabrication processes. You will work closely with manufacturing, process, quality, and R&D teams to ensure robust, high-yield production. • Analyse manufacturing data to identify yield loss mechanisms and drive corrective actions, • Support process integration across multiple semiconductor process steps, • Lead root cause analysis using statistical and problem-solving methodologies (e.g. SPC, DOE, 8D), • Drive yield improvement projects from investigation through to implementation, • Support new product introduction (NPI) and process change qualification, • Degree in Electrical Engineering, Electronic Engineering, Physics, Materials Science or a related discipline, • Experience in a semiconductor manufacturing or high and medium volume manufacturing environment, • Strong understanding of semiconductor processes and process integration, • Proven experience with yield analysis and data-driven problem solving, • Familiarity with statistical analysis tools and manufacturing data systems, • Competitive salary, relocation and benefits package, • Opportunity to work with advanced semiconductor technologies, • Supportive and collaborative engineering environment, • Career development and training opportunities Apply Now! Or for more information on the Yield and Integration Engineer position please contact Tommy Beazley quoting job reference TRB512 #J-18808-Ljbffr

Role: Electrical Maintenance Engineer / Maintenance Electrician Salary: £48,000 - £50,500 per annum, plus overtime and opportunities to learn and develop Hours: Panama Shift Pattern, 6 till 6, 2 Weeks Of Days followed by 2 Weeks Of Nights (Working 7 of every 14 days) Week 1: Mon, Tues, Fri, Sat Week 2: Sun, Weds, Thurs Location: Commutable from Durham, Darlington, Stockton on Tees, Middlesbrough, Hartlepool, Sunderland and surrounding areas Company We are currently recruiting for an Electrical Maintenance Engineer / Maintenance Electrician to work within a manufacturing company at one of their leading automated factories. You will benefit from a friendly and loyal team of Engineers working in this fast faced environment. The role is varied and enjoyable where you can expect to be challenged, be supported and help continuously improve machinery. Responsibilities This role will involve all aspects of trouble shooting, problem solving and project work. You will be required to look for and implement continuous improvements individually and as part of a team. In addition, you will also be required to plan and carry out preventative maintenance in order to ensure a high standard of plant maintenance is always achieved. You will be required to assist in all maintenance activities on site. The successful candidate will be working as part of the electrical maintenance team ensuring that all electrical plant equipment is operating efficiently with the minimum amount of downtime and in a safe order. You will also be required to adhere to strict health and safety requirements at all times. Electrical maintenance of all plant and machinery through fault finding, planned maintenance, shut downs and project work. Working as part of a team, you will be responsible for all electrics throughout the factory. Identification of solutions that improve efficiency and reduce costs. To develop an understanding of machinery operation so that faults can be diagnosed and rectified efficiently. To provide good communication to colleagues and production and keep the required logs of maintenance work. To work safely at all times and follow safe systems of work. To be actively involved in the TPM improvement process. To work tidily and make a positive contribution to the 5S system. The role will include anything electrical, including sensors, motors, variable speed drives, contactors, relays, inverters and PLCs. any experience of some of these will be highly desirable. Requirements Completed a recognised electrical engineering apprenticeship or hold an engineering Electrical qualification Experience of electrical maintenance engineering within an industrial or manufacturing environment Fault finding & troubleshooting of PLC's -additional interest or knowledge of programming PLC's is desirable Some of the following electrical experience; 3 phase, star / delta motors, sensors, inverters, contactors, relays, servo drives, installations, general maintenance Friendly and adaptable working attitude, with the hunger to learn and progress Proactive work attitude and keen to get stuck in If this role sounds of interest, please apply now and send your most up to date CV to Jane at TechNichols Resourcing to be considered. Or call TechNichols Resourcing and speak with Jane for further information. We will endeavour to get back to all applicants but if you have not heard back within 5 working days unfortunately your application has been unsuccessful. TPBN1_UKTJ

Maintenance Engineer needed for a role with rotating shifts (early, afternoon, night). Salary offered is between £43,000 and £46,500 per annum.

An excellent opportunity for an experienced Multi Skilled Service Engineer to join a well-established company. Job Type: Full-Time, Permanent Salary: Up to £40,000 Per Annum (OTE £45k) Depending on Experience Location: Shildon, County Durham DL4 Working Hours: 37.5 Per Week - (09:00am 17:00pm) Holiday Entitlement: 33 Days (25 plus statutory bank holidays) xrnqpay All hours additional to the 37.5 are paid at ov Below covers everything you need to know about what this opportunity entails, as well as what is expected from applicants. Please click on the apply button to read the full job description

Electrical Maintenance Engineer needed for a manufacturing company to perform fault finding, troubleshooting, and continuous improvement on automated factory machinery. Responsibilities include preventative maintenance, project work, and ensuring electrical equipment operates efficiently and safely.

As one of our Gas Engineers, you'll stay in control of your own Gas Safe card while enjoying a reliable, steady income you can depend on. Here's What You Can Expect To Be Doing As Our Gas Installations Engineer: As an AO Gas Engineer, you'll head out on the road with one of our drivers, visiting cus

ResponsibilitiesMonitor and ensure compliance with environmental regulationsManage permits, reporting, and renewal processesMaintain and update site Environment Impact AssessmentsOversee waste management pro

ISS Facility Services UK is seeking a Project Coordinator / CAD Technician to support project delivery, maintain technical documentation, and coordinate contractors and enabling works at Bishop Auckland Hospital. The role combines project coordination with AutoCAD drawing management and technical ad

The IT Security & Infrastructure Engineer is responsible for maintaining, improving and securing Octric’s core IT infrastructure while supporting the organisation’s cyber security and compliance requirements. The role will also support infrastructure improvements, project delivery and operationa

Reporting to the Commercial Manager, the Account Manager plays a critical role in driving business growth and ensuring customer satisfaction. MTrec Commercial are proudly representing our prestigious engineering client on their search to appoint an experienced Customer Account Manager to join their

Forge Talent Group seeks an experienced Senior Quality Engineer to lead quality across NPI and Plant Quality, ensuring robust development, validation and continuous improvement of products and processes.

Freedom is seeking a Project Manager for Cable Engineering (Asset) in North-East England.The role leads Asset Replacement projects under the Northern Powergrid contract, ensuring safe, on-time, and on-budget delivery across a regional portfolio.The position requires senior operational experience in

Octric Semiconductors Ltd is hiring an IT Security & Infrastructure Engineer in Newton Aycliffe, UK. The role focuses on maintaining core IT infrastructure and managing cyber security compliance.

Recruitment Helpline Ltd in Shildon, County Durham, is seeking a Multi Skilled Service Engineer to join our UK team. The role covers manufacture, installation, service and maintenance of purified water systems across pharma, medical devices and health and beauty sectors.

As the first supplier to install a Smart Meter back in 2005 and kick-start Britain’s smart meter revolution, we continue to invest in smart technology and look for new ways to improve our services through innovation. As a Dual Fuel Smart Meter Engineer, you will represent Utilita in customers’ h

Luxion Group, on behalf of Utilita Energy, is seeking a qualified Dual Fuel Smart Meter Engineer to install smart meters in domestic properties across DL, TS, NE postcodes.

Linde Material Handling, a global leader in forklift trucks and warehouse equipment, is seeking skilled Field Service Engineers to join our UK team.

A specialist equipment manufacturer in the UK is seeking a dedicated Field Service Engineer. In this varied, hands-on role, you'll execute service and repair work at customer sites, support new installations, and perform assembly testing at the factory. Candidates should have NVQ or C&G Level 3 in E

RWE Renewables UK Management Ltd.Operations Engineer for Rampion, an 18-month fixed-term role within the Rampion Engineering team.The position covers maintenance campaigns, RAMO strategy, and project delivery to improve site performance.On-site presence is required, with emphasis on safety and effic

An exciting 18 month fixed term contract opportunity has become available to join the Rampion Engineering team as an Operations Engineer. Support team members with operational tasks across all key areas of operations engineering. Degree qualified in relevant engineering discipline or working towards

Rise Technical is recruiting for an Electrical Maintenance Engineer to join a long-standing nationwide market leader at their Newhaven site. The role offers days Mon-Fri, early finish on Friday, and a competitive salary with specialist training and clear career progression.

Cleanroom, Laboratory, and Healthcare sectors.Our reputation for quality and reliability means our bespoke systems are trusted by major organisations across the UK and beyond.Collaborate with project and production teams to deliver.Supportive, close‑knit team and long‑term stability.NVQ or C&G L

We welcome and value differences in background, age, gender, sexuality, family status, disability, race, nationality, ethnicity, religion, and world view. Ensure network infrastructure remains secure through patching, upgrades, hardening activities and cyber security compliance initiatives. We also

Fuel your future with AO - earn up to £2,000 in performance bonuses!.Imagine achieving the perfect balance between work and life with a shift pattern that works for you.Join our team as a Gas Engineer and enjoy the freedom of maintaining your own Gas Safe card while earning a dependable income you

MTrec Commercial are seeking an experienced Customer Account Manager to drive growth and ensure customer satisfaction for an engineering client. Reporting to the Commercial Manager, you will build strong relationships across Operations, Engineering, Quality and Procurement, travel as needed, and act

An exciting 18 month fixed term contract opportunity has become available to join the Rampion Engineering team as an Operations Engineer. Support team members with operational tasks across all key areas of operations engineering. Degree qualified in relevant engineering discipline or working towards

Pin-Point-Recruitment is seeking a Design Engineer to join a fast-paced team in Newton Aycliffe.

You will develop and maintain quality systems, drive continuous improvement, and lead NPI activities including PFMEA, Control Plans, and APQP.

Carrington West is seeking an experienced Freelance Site Engineer for marine civil works in Newhaven, East Sussex.

Holt Recruitment is seeking a Mobile Forklift Engineer to join a friendly and supportive team at Newton Aycliffe, UK. You will service, repair and maintain a variety of forklift trucks and material handling equipment, with a strong emphasis on safety and reliability.

As a Field Service Engineer, you will embark on a dynamic journey in the world of material handling, where no two days are the same. Exciting Career Opportunity as a Field Service Engineer at Linde Material Handling in the following post codes DH, SR, NE. Are you ready to take the next step in your

Operations Engineer on a full‑time 18‑month fixed term secondment to join the Rampion Engineering team in the UK.

As a Chemical Process Engineer, you will develop, optimise and commercialise innovative products and materials through scientific research, formulation, testing and process improvement. This is an opportunity for an experienced Chemical Process Engineer to take genuine ownership of research, formula

Design EngineerLocation: Newton AycliffeAre you a Design Engineer looking to join a fast-paced team? Do you have experience taking products from initial concept to project delivery?The Role:Using Autodesk Inventor and AutoCAD to create conceptual and detailed designs.Perform mechanical and thermal s

Electrical Maintenance Engineer Salary: £50,460 + Pension + Benefits • Training and Development opportunities, • Company Pension @ 4.5%, • SIP - ability to become a shareholder, • Life assurance Location: Todhills, Bishop Auckland Shift Pattern: Panama Shift, Days and Nights 6.30 - 6.00 11.5 hour shifts 2 weeks of day shifts followed by 2 weeks of nights. Hours of Work: 7 days out of every 14 days. 2 weeks of days (6am to 6pm), 2 weeks of nights (6pm to 6am). Working week is Sunday to Saturday Week 1 Monday, Tuesday, Friday Saturday Week 2 Sunday, Wednesday, Thursday Reference: 7450/LN The Company An excellent opportunity has arisen with one of the world’s leading manufacturers of construction based products. The company is extremely well established with over 150 years of manufacturing experience and has a global reputation which is second to none in their marketplace. Due to continued expansion, they are looking to recruit an experienced engineer. Key Skills • Apprentice Trained Engineer in Electrical Engineering, • Experience of PLC Systems & Automated Machinery, • Health & Safety Awareness The Role The company require an electrical engineer who can work to manage PPM schedules, contractors, working a continental shift pattern. The candidate will have a minimum of a time served apprenticeship and with engineering fault finding skills. In addition to this, you will have a good working knowledge of PLC systems, hydraulics, pneumatics, automated machinery, electrical motors and drives. You will be involved in a variety of projects on site and be the focus from a mechanical point of view process improvement on site. Ongoing training and support within this highly focused group will give the right candidate an opportunity to progress into larger roles within this long-standing group. If you are interested in this role, please send a copy of your current CV using the details provided, interviews will be held locally, and the company is looking to recruit this role as soon as possible. ETS Consulting Ltd – Recruitment specialists with specific areas of expertise in the Manufacturing, Technical, Engineering and Sales markets. ETS Consulting Limited act as an employment business and employment agency and are registered in England and Wales as ETS Consulting Limited, registered no (phone number removed). Registered office address 7 Stamford Square, Ashton Under Lyne, Lancashire, United Kingdom, OL6 6QU. If one of our consultants contacts you in relation to this role, please be aware that as part of our registration process you will be required to provide ETS Consulting with proof of your identity along with proof of your eligibility to work in the United Kingdom

Mechanical fitter (Manual / CNC Machines) Newton Aycliffe £40,000 - £50,000 + Training + Progression + Company Bonus + Days Based + Overtime + Company Van Are you a Mechanical Fitter with experience on working on manual or CNC machines looking to step into a role with a national machine tool distributor offering guaranteed overtime each week, a yearly bonus and an early 2:30 finish on Fridays? This is chance to join a well-established machine tools specialist covering all types of manual and CNC machinery from drilling equipment to boring machines. Holding one of the largest stocks of used machine tools in the UK, they are looking for a Mechanical Fitter to join their tight-knit team of 10 to service specialist machinery. In this role you can choose on being in the field nationwide or being workshop based in Shildon. You will be assembling, diagnosing, maintaining and repairing a range of manual and CNC machinery including lathes, milling machines, grinders and radial ARM drills. This role is 8am-4:30pm Mon-Thurs with a 2:30pm finish on Friday which will soon be changed to 12pm. This role would suit a Mechanical Fitter from a manual or CNC machine background looking to join a company offering a great work-life balance and guaranteed ways to boost your income further. The Role: Assembling, maintaining and repairing manual and CNC machinery You can choose either workshop based or field based 5 hours of overtime available each week at 1.3x pay Mon-Thurs (8am-4:30pm) and early finish on Friday (2:30pm)The Person: Mechanical Fitter or Assembler with experience on manual / CNC machinery Willing to commute to workshop in ShildonMechanical, Manual, CNC, Fitter, Assembler, Maintenance, Diagnosing, Milling, Lathes, Grinders, Overtime, Progression, Training, Shildon, Newton Aycliff, Durham, Middlesbrough Reference Number: BBBH26980 If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website

Senior NPI Engineer Location: Sedgefield, England, United Kingdom Job Type: Full-time, hybrid Salary: Competitive, depending on experience Join an award-winning technology business designing and manufacturing advanced RF, microwave and mmWave solutions for demanding communications, aerospace, defence and space applications. You’ll work at the interface between engineering and production, helping move new products from prototype through to stable, repeatable manufacturing. Key Responsibilities Support NPI activities from prototype through to production Develop and optimise manufacturing processes Support DFM and DFA activities Analyse RF test data to improve yield and process capability Investigate manufacturing and RF performance issues Support production ramp-up and continuous improvement Design and implement tooling and fixtures Produce manufacturing procedures and technical documentation About You HND, degree or equivalent experience in Electronics, RF, Manufacturing Engineering or a related field Experience introducing RF or microwave products into manufacturing Background in RF, microwave, electronics, aerospace, defence, semiconductor or other high-precision manufacturing Strong analytical and problem-solving skills Experience with manufacturing process development and continuous improvement Knowledge of 8D, DMAIC or FMEA SPC and process capability experience would be advantageous Familiarity with VNA, spectrum analysers and signal generators would be beneficial Benefits Competitive salary 37.5-hour working week 25 days’ holiday plus public holidays Option to buy up to 5 additional days Up to 8% employer pension contribution Life Assurance and Income Protection SAYE share scheme EV and Cycle to Work schemes Volunteering day Learning and development opportunities Hybrid working Relocation assistance available This is a great opportunity for an experienced NPI Engineer to work on technically challenging products within a growing business in Sedgefield, with access to advanced RF and microwave technologies and strong opportunities for development

We are looking to recruit an experienced Senior Quality Engineer to join our client's team on a permanent basis. Job Purpose To lead quality activities associated with New Product Introduction (NPI) and Plant Quality, ensuring products and processes are robustly developed, validated, controlled and continuously improved. The role acts as the key quality representative during project launches while driving quality performance across manufacturing operations, customer requirements, supplier quality issues and continuous improvement initiatives. The Senior Quality Engineer will play a pivotal role in ensuring compliance with customer-specific requirements, IATF 16949, ISO 9001 and internal quality standards, while supporting the achievement of operational, quality and customer satisfaction objectives. Key Responsibilities New Product Introduction (NPI) Serve as the Quality lead for NPI projects from quotation through to Start of Production (SOP). Support Advanced Product Quality Planning (APQP) activities and ensure quality deliverables are completed to programme timing. Lead Production Part Approval Process (PPAP) submissions and customer approval activities. Facilitate PFMEA reviews and develop control plans using the structured AIAG–VDA 7‑step methodology to drive robust, risk‑focused process control. Ensure customer and product quality requirements are effectively incorporated into manufacturing processes. Coordinate Measurement System Analysis (MSA), validation and process capability activities. Support prototype, pilot and launch builds, including launch containment and early production quality monitoring. Act as a key customer quality contact during product introduction phases. Plant Quality Lead investigations into customer complaints, internal non-conformances and supplier-related quality issues. Drive structured root cause analysis using appropriate methodologies, including 8D, 5 Why and Ishikawa. Ensure robust containment, corrective and preventive actions are implemented, documented and verified for effectiveness. Monitor quality performance indicators, including PPM, scrap, rework, customer complaints and cost of poor quality. Lead continuous improvement activity to improve product and process quality and reduce variation. Establish and maintain effective process controls to minimise defects and recurrence. Support production teams in resolving significant or recurring quality concerns. Develop and deliver quality improvement projects aligned with plant objectives. Customer & Supplier Quality Act as the primary customer quality interface for allocated accounts. Lead customer visits, audits and quality performance reviews. Coordinate customer complaint, warranty and field-return investigations where applicable. Support supplier quality performance improvement activities. Review supplier corrective actions and verify effective resolution. Participate in supplier audits and supplier development initiatives. Quality Systems & Compliance Support the maintenance and continual improvement of the Quality Management System. Ensure compliance with IATF 16949, ISO 9001, customer-specific requirements and internal standards. Conduct internal audits and support customer, certification and other external audits. Maintain quality documentation, including procedures, process flow charts, PFMEAs and control plans. Ensure lessons learned are captured, communicated and incorporated into future quality planning. Leadership & Development Provide technical guidance and mentoring to Quality Engineers, Quality Inspectors and cross-functional colleagues. Promote a culture of quality ownership and right-first-time performance throughout the business. Lead quality-related training and awareness activities. Support the development and implementation of site quality strategies. Deputise for the Quality Manager when required. Key Performance Indicators Customer PPM and complaint performance. Internal defect, scrap and rework reduction. NPI launch quality and containment performance. On-time and right-first-time PPAP submission. Audit completion, findings and compliance performance. Corrective action closure and effectiveness. Cost of Poor Quality reduction. Supplier quality performance improvement. Knowledge, Qualifications & Experience Essential Degree, HNC/HND or equivalent qualification in engineering, manufacturing, quality or a related discipline. Significant Quality Engineering experience within an automotive or advanced manufacturing environment. Strong working knowledge of APQP, PPAP, PFMEA, Control Plans, MSA and process capability. Strong understanding of IATF 16949, ISO 9001 and customer-specific requirements. Experience leading structured problem-solving and corrective action programmes. Experience dealing directly with customers and suppliers. Strong analytical, data interpretation and report-writing capability. Internal Auditor qualification or equivalent practical auditing experience. Desirable Lead Auditor qualification. Six Sigma Green Belt or equivalent continuous improvement qualification. Experience of metal pressing, tooling, assembly or automotive manufacturing processes. Experience mentoring or supervising Quality Engineers, Technicians or Inspectors

RF Engineer – RF & Microwave – High Peak, Derbyshire An RF Engineer job is available in High Peak, Derbyshire, with a leading technology business specialising in the design and manufacture of high-performance RF and microwave products and solutions. We are seeking an experienced RF Engineer with strong expertise in RF design, microwave engineering, RF simulation, testing and measurement, ideally with experience developing high-performance RF and microwave circuits, components or subsystems. Based in High Peak, you will work on the design, development and delivery of advanced RF and microwave technology, supporting products from initial concept and simulation through prototyping, testing and into volume manufacturing. This is an excellent opportunity for an RF Engineer looking to work on technically challenging projects within a multidisciplinary engineering environment. Responsibilities of the RF Engineer job in High Peak, Derbyshire • Leading the RF and mmWave design, simulation and development of circuits, components and subsystems, ensuring designs meet technical and customer requirements. • Conducting RF testing, measurement, characterisation and validation, alongside system analysis, performance optimisation and troubleshooting of complex RF designs. • Developing detailed RF engineering documentation, including design reports, test plans and test results, while maintaining high engineering standards. • Supporting the transition of RF designs from concept through prototyping into volume manufacturing, working with process engineering and operations to ensure manufacturability and yield. • Collaborating with project managers and multidisciplinary engineering teams, providing RF engineering expertise for RFQs, proposals, customer engagements and product development projects. Requirements of the RF Engineer job in High Peak, Derbyshire • Proven experience in RF engineering, RF design and microwave engineering, with knowledge of RF and microwave circuits, components and subsystems. • Experience with RF simulation, system analysis, performance optimisation and troubleshooting of complex high-frequency designs. • Hands-on experience in RF testing, measurement, characterisation and validation of prototypes and production hardware. • Experience producing detailed RF engineering documentation and working to technical specifications, standards and customer requirements. • Strong communication and collaboration skills, with the ability to work effectively with electronics, mechanical, software and systems engineers, as well as internal and external stakeholders. This is an excellent opportunity for an RF Engineer to work on advanced RF and microwave, contributing to the design and development of high-performance products within a technically challenging and collaborative engineering environment