Offres personnel security à BoltonCréer des alertes d'emploi

The Environmental Manager is responsible for developing and supporting the implementation of environmental plans to support the environmental strategy, ensuring compliance with relevant legislation and driving continuous improvement in environmental performance. This role plays a critical part in shaping the organisations long-term environmental leadership within the utilities sector. • Develop and implement environmental strategies, policies and action plans that sup-port corporate objectives and promote continuous improvement, • Ensure full compliance with UK, EU and International environmental legislation, regulations and best practice., • Maintain up-to-date knowledge of emerging legislative changes, industry trends and environmental risks., • Develop, implement and continually improve Environmental Management Systems to maintain ISO14001 certification., • Coordinate initiatives for: Streetworks UK, pollution control, waste management, recycling, environmental health, conservation, biodiversity and renewable energy., • Audit, analyse and report environmental performance to senior management, regulatory bodies and external stakeholders (where required)., • Lead the preparation and publication of environmental reports, assuming overall responsibility for content and quality., • Support the business with the creation of Environmental Permits., • Conduct environmental impact assessments, risk reviews and cost analyses to identify opportunities to reduce environmental impact and financial exposure., • Liaise with regulatory authorities, local authorities, public bodies and environmental agencies., • Manage relationships with senior leaders and internal colleagues, ensuring transparency and alignment on environmental priorities., • Promote environmental awareness and sustainability across all organisational levels, fostering a culture of responsibility., • Participate in environmental education programmes, industry forums and research initiatives to strengthen organisational capabilities and reputation. Essential • Relevant environmental or sustainability degree or equivalent professional qualification (or evidence of working towards)., • Membership of a recognised professional body (e.g., IEMA, CIWEM) (or evidence of working towards)., • 5 years experience working in Senior Environmental with demonstratable ability to provide advice on legislative change and implementing systems to meet such changes., • Strong knowledge of UK, EU and international environmental regulations and compliance frameworks., • Demonstrable experience in environmental management within a large, complex organisation, • Expertise in developing and implementing environmental management systems (e.g., ISO 14001) and integrated systems., • Competent in environmental risk assessment, impact assessments (EIA) and ecological constraints., • Proven ability to lead cross-functional improvement initiatives., • Strong analytical, auditing and reporting skills., • Excellent communication, influencing and stakeholder engagement capabilities., • Good computer skills at Microsoft Word, Excel, PowerPoint Teams Tools, • Understand Data and act upon non-compliant issues, • Able to liaise with client and customer stakeholders – both internal and external, • Strong written and verbal communication and people skills, • Full driving licence Desirable, • Experience of working in utilities, waste management, infrastructure or industrial sec-tors., • Understanding of Streetworks UK Requirements and Waste Management Regulations, • Knowledge of carbon management, net-zero and sustainability, • Experience liaising with regulatory authorities, local authorities, public bodies and environmental agencies. We offer a competitive salary based on experience along with a full benefits package. Network Plus is proud to be an Equal Opportunity Employer. We celebrate diversity and do not discriminate based on race, religion, colour, nationality, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. We are Armed Forces-friendly. We welcome applications from ex-Armed Forces personnel, reservists, armed forces veterans, cadet instructors and military spouses/partners. We understand that privacy and the security of your personal information is extremely important. By applying for this role, you agree to the terms of our privacy policy. Network Plus is an award-winning business delivering essential utility and infrastructure services for the UK’s major providers of gas, power, telecoms, transport, water, and wastewater. We value the variety of experience, perspective, and other points of difference our workforce, clients, and supply chain offer. We are actively working with colleagues across the Network Plus Group to develop an inclusive environment – we want all our employees to feel valued and included to enable everyone to thrive at work and understand the value of their contribution matters no matter their background, identity, or circumstances.

As the Regional HSEQ Compliance Auditor, you will be responsible for undertaking & delivering the regional HSEQ compliance audit plans for the business. You will collectively be undertaking risk-based audits to ensure HSEQ standards are being adhered to and providing assurance that contractual requirements are being met. In addition, you will also support the Group Quality Manager during external HSEQ audits to maintain accreditations. This will involve auditing the onsite activities of the Network Plus Group, its subsidiaries businesses, the regional depots and in some cases will also include our sub-contractors activities. As part of this role, you will be responsible for managing a non-conformance database detailing findings from audits, including follow up and close out. You will be required to provide stakeholders with visibility of all non-conformances and improvement opportunities. You will have a passion for ensuring exceptional levels of health, safety, quality and environmental standards are delivered. You will possess an attention to detail to ensure that audit reports are completed to a professional standard and are presentable to all business stakeholders. (internal & external stakeholders) • Work with the Group Internal Audit Manager to develop implement and monitor an effective regional assurance program to cover risks detailed within the HSEQ Risk Register and ensure compliance with Network Plus’s safety standards and regulatory requirements., • Undertake HSEQ Compliance Audits in line with Group assurance programme, coordinate with auditees to ensure audits are undertaken on live worksites. (our worksites can be of a short duration and may involve occasional night visits to traffic management activities)., • Undertake HSEQ Compliance Audits in line with Group assurance programme, within our offices and depots, coordinate with auditees as to ensure audits are undertaken with relevant personnel present., • Support the Group Quality Manager in co-ordination of external audits, accreditation body and client audits., • Provide a consistent approach and identification non-conformances and opportunities for improvement and the escalate areas of potential impact., • Undertake audit close out meetings with auditees, support their understanding on findings, audit actions, closure plans and timescales., • Provide regular data and management reports in line with the governance structure on audit action management, and any learning from experience identified., • Collate and provide back to group audit closure evidence as required / requested., • You will support & drive the correct and safe behaviours out on site and within the offices & depots. Essential • Recognised Lead Auditor Qualification, • Recognised Internal Auditor Qualification, • ISO 45001, 14001 and 9001 Awareness, • Working knowledge of SIPP and CDM, • Experience in a similar HSEQ Auditor role, • Working knowledge of ISO 45001, 14001 & 90001, • Working knowledge of CDM requirements, • Demonstrable Project Management Capability, • Proven experience of undertaking auditing activities within a utility /construction environment., • Utilities experience, • Knowledge of NHSS ( National Highways Sector Schemes), • Knowledge of NERs, WIRs & GIRs schemes ( Electricity, Water, Gas -Industry Regulatory schemes), • HSEQ Qualification e.g. NEBOSH Diploma (or equivalent), • Chartered Practitioner or working towards We offer a competitive salary based on experience along with a full benefits package. Network Plus is proud to be an Equal Opportunity Employer. We celebrate diversity and do not discriminate based on race, religion, colour, nationality, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. We are Armed Forces-friendly. We welcome applications from ex-Armed Forces personnel, reservists, armed forces veterans, cadet instructors and military spouses/partners. We understand that privacy and the security of your personal information is extremely important. By applying for this role, you agree to the terms of our privacy policy. Network Plus is an award-winning business delivering essential utility and infrastructure services for the UK’s major providers of gas, power, telecoms, transport, water, and wastewater. We value the variety of experience, perspective, and other points of difference our workforce, clients, and supply chain offer. We are actively working with colleagues across the Network Plus Group to develop an inclusive environment – we want all our employees to feel valued and included to enable everyone to thrive at work and understand the value of their contribution matters no matter their background, identity, or circumstances.

Network Plus is seeking a VAT Manager. The successful candidate will lead the VAT compliance process including the below points. We would be open to either a full or part-time working pattern. • Hands on preparation and submission of VAT returns (monthly and quarterly), including data extraction, cleansing, and manipulation from raw ERP reports., • Management of VAT forecasts and overseeing all related VAT payments to HMRC., • Completion of all balance sheet reconciliations for VAT, including the preparation and posting of supporting journals., • Monitoring of the group structure, managing VAT groups, and handling registrations/deregistrations for new leavers and joiners., • Acting as the lead point of contact for HMRC audits and enquiries., • Assisting the Head of Tax with Senior Accounting Officer (SAO) compliance, maintaining a robust VAT control and governance framework., • Reviewing existing processes and policies to implement strategies for improvement, data accuracy, and automation., • Providing VAT advice and guidance on proposed business strategies, contracts, and due diligence for potential acquisitions., • Delivering training to commercial and operational teams to ensure VAT risks are identified at the source., • Collaborating with the Finance Transformation team as the lead for VAT reporting and tax technology improvements., • Continuous review of UK indirect tax developments to identify opportunities for cash flow improvements, recovery, and risk mitigation., • Experience in managing VAT processes for a large group, either in-house or within a professional tax advisory firm., • Willingness to 'get into the detail' and be comfortable with the full lifecycle from initial data preparation to final submission., • Proficiency with Microsoft Dynamics 365 Business Central is desirable but not essential., • Experience with the Construction Industry Scheme (CIS), Domestic Reverse Charge (DRC), or Partial Exemption is desirable but not essential., • Experience with Customs and indirect tax implications of cross border transactions is desirable but not essential., • Professional qualification in tax or accounting (ATT, ACCA, ACA, CTA) or equivalent., • Advanced Excel skills (Vlookups, Pivot tables, Sum If, etc) and experience managing complex data sets. We offer a competitive salary based on experience along with a full benefits package. Network Plus is proud to be an Equal Opportunity Employer. We celebrate diversity and do not discriminate based on race, religion, colour, nationality, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. We are Armed Forces-friendly. We welcome applications from ex-Armed Forces personnel, reservists, armed forces veterans, cadet instructors and military spouses/partners. We understand that privacy and the security of your personal information is extremely important. By applying for this role, you agree to the terms of our privacy policy. Network Plus is an award-winning business delivering essential utility and infrastructure services for the UK’s major providers of gas, power, telecoms, transport, water, and wastewater. We value the variety of experience, perspective, and other points of difference our workforce, clients, and supply chain offer. We are actively working with colleagues across the Network Plus Group to develop an inclusive environment – we want all our employees to feel valued and included to enable everyone to thrive at work and understand the value of their contribution matters no matter their background, identity, or circumstances.

An opportunity has arisen for a Shopping Centre Manager to join a well-established company managing shopping centres, specialising in retail asset management, leasing, and operations. As a Shopping Centre Manager, you will lead the day-to-day management of the centre, driving operational standards, commercial performance, and team effectiveness. This role offers a salary range of £60,000 - £80,000 and benefits. You will be responsible for: • Managing the smooth daily operation of the shopping centre, • Leading, supporting and developing on-site teams, including security personnel, • Building and maintaining positive occupier relationships, handling enquiries, compliance matters and negotiations, • Overseeing site presentation, facilities management, maintenance and cleaning standards, • Supporting and delivering promotional campaigns and events to enhance visitor engagement, • Maximising retail performance through effective space utilisation and merchandising initiatives, • Managing budgets, monitoring expenditure and supporting financial performance targets, • Ensuring compliance with health and safety procedures and emergency protocols, • Previously worked as a Shopping Centre Manager, Retail Centre Manager, Centre Manager, Shopping Mall Manager, Operations Manager, Retail Operations Manager, Centre Operations Manager, Retail Property Manager or in a similar role., • Prior experience within shopping centre management or a retail management environment, • Strong leadership capability with experience managing and motivating teams, • Sound understanding of retail operations and commercial performance, • Well-organised with the ability to manage competing priorities effectively, • Strong problem-solving skills with a proactive and hands-on approach, • Competitive salary, • Company pension, • Company events, • On-site parking Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us. Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.

Our client, a trusted partner of the UK's Ministry of Defence, is seeking an experienced Manufacturing Engineer with expertise in Assembly and Integration, particularly in circuit card assemblies. Based within the unit and missile assembly manufacturing facility, you will play a key role in ensuring products are built efficiently, on time, and within budget. As a vital member of the Manufacturing Engineering team, you will provide support across multiple projects, contributing to the successful delivery of high-quality manufacturing solutions. Key Responsibilities: • Prepare and maintain detailed Manufacturing Instructions to ensure accuracy and clarity., • Design, commission, and validate the necessary tooling for production processes., • Support industrial validation activities, including FMEA and First Article Inspection (FAI)., • Diagnose and resolve technical issues encountered during manufacturing., • Update route cards to reflect changes resulting from rework activities., • Manage configuration control by incorporating design modifications into manufacturing documentation., • Electrical/Mechanical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achieved, • (These qualifications must meet the standard to be considered for the role)., • "or", • BEng Degree in a relevant Engineering subject. Skill Requirements: • Ability to interpret design drawings and produce precise Manufacturing Build Instructions for both skilled and semi-skilled operators., • Proven experience in electronic sub-assembly manufacturing through to full system builds., • Knowledge and hands-on experience of assembly processes for small or miniature electro-mechanical actuation systems., • Strong team player with the ability to collaborate and contribute effectively within a group environment., • Ability to understand and respond to customer requirements., • Familiarity with and adherence to company processes and procedures., • Excellent communication skills, capable of engaging effectively within the team and across various organisational levels. What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenshipRestrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the roleFor more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy.

1:1 Behaviour Support Teaching Assistant Year 4 Full-time September 2026 – July 2027 A welcoming primary school in Bury is seeking a dedicated 1:1 Behaviour Support Teaching Assistant to work with a Year 4 pupil who finds certain aspects of learning and the school environment challenging. This is a full-time, long-term opportunity running from September 2026 until the end of the 2026/27 academic year, offered through Teaching Personnel. Working hours: Monday to Friday, 8.30am–3.30pm Pay: Competitive daily rate, paid weekly About the Role In this role, you will provide consistent 1:1 support to help the pupil access learning, regulate emotions, and engage positively with the school day. The child benefits from a calm, patient adult who can provide structure, reassurance, and clear boundaries while encouraging independence and confidence over time. You will be part of a wider school team and will work closely with the class teacher and SEN staff to implement behaviour strategies and support plans tailored to the pupil’s needs. This position would suit someone who is: Calm, resilient, and emotionally attuned, even in challenging moments Confident supporting behaviour in a positive, proactive way Patient and consistent, with the ability to build trust and strong relationships Observant and reflective, able to adapt support as the child’s needs change Committed to seeing progress over time and providing stability throughout the year Experience supporting children with behavioural, social, or emotional needs is highly desirable, whether in a school, care, youth work, or similar setting. Key Responsibilities Providing 1:1 behavioural and emotional support throughout the school day Supporting the pupil to engage with learning in the classroom and wider school environment Implementing agreed behaviour strategies and promoting positive choices Helping to manage transitions and potentially challenging moments Encouraging independence, confidence, and social development Working collaboratively with teaching staff and SEN professionals Monitoring progress and feeding back to relevant staff This role offers the continuity of a long-term placement with the flexibility and support of supply work, including: Weekly pay at a competitive rate Ongoing support from a dedicated consultant The security of a full academic year placement without being tied to a permanent contract Opportunities for professional development and future long-term or permanent roles A chance to gain in-depth, meaningful experience within one setting This is an excellent opportunity for a passionate support professional looking to make a genuine difference, while benefiting from the flexibility and support that supply work provides. All applicants will require the appropriate qualifications and training for this role. Please see the FAQ’s on the Teaching Personnel website for details.All pay rates quoted will be inclusive of 12.07% statutory holiday pay. This advert is for a temporary position. In some cases, the option to make this role permanent may become available at a later date.Teaching Personnel is committed to safeguarding and promoting the welfare of children. We undertake safeguarding checks on all workers in accordance with DfE statutory guidance ‘Keeping Children Safe in Education’ this may also include an online search as part of our due diligence on shortlisted applicants.We offer all our registered candidates FREE child protection and prevent duty training. All candidates must undertake or have undertaken a valid enhanced Disclosure and Barring Service (DBS) check. Full assistance provided.For details of our privacy policy, please visit the Teaching Personnel website.

An opportunity has arisen with my client for an Electrical Fitter to join them on a 12-month contract. As the Electrical Fitter you will be responsible for carrying out manufacturing and test tasks within the electrical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives.\n\nRole: Electrical Fitter\n Pay: £28.35 per hour via umbrella (rising to £29.70 per hour after 12 weeks)\n Location: Bolton\n Contract: 12 Months\n Hours: Monday - Friday, 37 hours per week\n Security Clearance: BPSS\n\nResponsibilities:\n\nCertify the product in line with Product Certification procedure.\nDemonstrated ability / willingness to certify own work in line with company quality standards.\nMaintain product certification and approval via regular audits.\nPossess a versatile skill base with the capability to apply these skills across a range of tasks.\nBe fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle.\nEnsure manufacturing build, inspection and where relevant test times are met.\nCheck and complete all paperwork associated with the manufacturing data pack.\nMaintain to the highest level, workmanship standards and product quality.\nEnsure compliance with all associated procedures applicable to the manufacturing process.\nMaintain a safe working environment.\nMaintain a good housekeeping policy.\nWilling to contribute to an environment of process improvement\n Education/Qualifications\n\nApproved Apprenticeship/Apprenticeship Framework/Modern ApprenticeshipOR\n\nVocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3OR\n\nVocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3OR\n\nVocational NVQ3 with Further Education, BTEC ONC/HNC\n Skills/Experince\n * IPC 610 certified/ trained preferred. \n * Possess experience in electrical wiring and assembly. \n * Previous experience in the aerospace or defence industry would be desirable. \n * Manual handling training. \n * Lifting and slinging (including overhead cranes) training. \n * ESD training.\n Please send your updated CV to: Natalie Dalkin at Line Up Aviation\n Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. \n "Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

On behalf of our client, we are looking for a Test Equipment Obsolescence Manager to join them on an initial 6 -month basis.\n\nRole: Test Equipment Obsolescence Manager\n Pay: Up to £60 per hour via Umbrella\n Location: Bolton\n Contract: 6 months (possible extension)\n IR35 Status: Inside\n Security Clearance: SC Clearence needed, UK eyes only\n\nResponsibilities\n\nManaging Proactive and Reporting Services\nImplementing Strategy for Obsolescence Management\nTechnical Assessment working with Engineering teams to manage changes\nManaging Resources and Work load Planning\n Skillset/experience required:\n\nEngineering Degree or relevant experience\nKnowledge and experience of managing Obsolescence\nKnowledge and experience of Electronic Equipment\nYou'll be prepared to work autonomously if needed, lead the delivery of your work assignments, and actively engage with stakeholders to ensure successful delivery of your outputs.\nManage discreet work packages preparing bids, controlling costs and delivering solutions.\nExcellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation.\nExperience of working within a multi-disciplinary team, with an awareness of the challenges and opportunities that this may bring and a passion for innovation and collaboration.\n If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation \n\nLine Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. \n\n"Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

On behalf of our client, we are looking for a Test Equipment Design Support Engineer\n to join them on an initial 6-month basis. As Test Equipment Design Support Engineer, you will act as the interface between our design teams and our manufacturing teams while working alongside other support engineers to provide knowledge and support\n\nRole: Test Equipment Design Support Engineer\n Pay: £65 per hour via Umbrella\n Location: Bolton\n Contract: 6 months (possible extension)\n IR35 Status: Inside\n Security Clearance: BPSS however requires Security Clearance \n\nSkillset/experience required:\n\nDegree qualified (or equivalent industry experience) with experience of designing product/systems and/or providing support to designs through the manufacturing phase of the product lifecycle.\nProven experience in the design of one or more of the following disciplines: - \n\nDigital and Analogue electronics\nPower Electronics\nRF & Antenna\nInterconnects\nSafety Electronics\nTest Systems\nSchematic design\nPCB Design\nAdherence to BS EN Standards \n\nExcellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation.\nExperience of working within a multi-disciplinary team, with an awareness of the challenges and opportunities that this may bring and a passion for innovation and collaboration.\nYou'll be prepared to work autonomously if needed, lead the delivery of your work assignments, and actively engage with stakeholders to ensure successful delivery of your outputs.\nManage discreet work packages preparing bids, controlling costs and delivering solutions.\nExperience in supporting manufacturing and resolving manufacturing issues is an advantage, but not essential.\nInvestigative skills to be able to find Root Causes of design related issues and propose robust Corrective Actions.\nFinally, we are looking for someone who has a record of accomplishment of on-time delivery along with good verbal and written communication skills.If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation \n\nLine Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. \n\n"Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

My client is looking for several Electrical Test Operators to join them on an initial 12-month basis. As the Electrical Test Operator will be responsible for carrying out test tasks within the operational business, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives.\n\nRole: Electrical Test Operator\n Pay: £28.35 per hour via Umbrella (rising to £29.70)\n Location: Bolton\n Contract: 12 Months (possible extension)\n Hours: Monday - Friday, 37 hours per week\n Security Clearance: Security Clearance required however can start on BPSS\n\nResponsibilities: \n\nCertify the product in line with the product certification procedure.\nMaintain product certification and approval via regular audits.\nPossess a versatile skill base with the capability to apply these skills across a range of tasks.\nBe fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle.\nEnsure manufacturing build, inspection and where relevant, test times are met.\nCheck and complete all paperwork associated with the manufacturing data pack.\nMaintain to the highest level, workmanship standards and product quality.\nEnsure compliance with all associated procedures applicable to the manufacturing process.\nMaintain a safe working environment.\nMaintain a good housekeeping policy.\nCommunicate best practice to other team members.Skillset/experience required:\n\nThe successful candidate should be a team player who is able to demonstrate customer focus. They should also have proven planning and organising skills and be flexible and adaptable.\nFormal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21/ONC. Formal further education certificate to HNC or equivalent certificate.\nSignifiacnt electrical test experince\nNo colour blindness.If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation\n Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. \n "Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

Company Description\n\nToday, Assystem is among the top three independent nuclear engineering firms worldwide. With over 60 years of experience in highly regulated sectors, the group supports public and industrial stakeholders in the execution of complex and strategic infrastructure projects, subject to high safety and security requirements. \n\nAssystem mobilizes 8,000 experts in 13 countries and intervenes across the entire project lifecycle, in engineering, project management and digital solutions.\n\nJob Description\n\nAssystem is looking for an enthusiastic an experienced Business Support Assistant to join our Bolton office. as part of the Business Services team. This is a varied and rewarding role providing a administrative support.\n\nWe are seeking a professional, well-presented individual with strong communication skills and excellent attention to detail. The successful candidate will have a flexible, positive attitude, be willing to “pitch in” where needed, and thrive in a busy office environment.\n\nIf you are organised, proactive and enjoy supporting teams to succeed, we would love to hear from you.\n\n🔑 Key Responsibilities\n\n🛎 Reception & Front of House\n\nReceptionist duties including welcoming guests, staff visitors and contractors\n\nEnsuring the Assystem visitor protocol is followed including checking ID and signing in guests\n\nSecurity Officer duties (Responsible Security Officer)\n\n👥 Onboarding & Offboarding\n\nNew starter onboarding, assisting with the issuing of passes etc\n\nPerforming office inductions\n\nIssuing car parking permits\n\nAssisting with the leavers process, return of passes and IT\n\n🦺 Health, Safety & Compliance\n\nActing as Responsible Health and Safety Officer (RHSO)\n\nRepresenting the Bolton office at Health and Safety meetings\n\nFirst Aider (training will be provided)\n\nFire Marshal (training will be provided)\n\n📦 Office & Facilities Management\n\nResponsible for post and parcel collection and deliveries to and from Building Reception; opening post, date stamping and distributing to colleagues on a timely basis\n\nMaintaining office systems, including data management and filing\n\nManage office supplies including stationery and consumables; maintain coffee machine\n\nSupporting the UK central Business Services team with office maintenance and repairs including hosting contractors\n\nOrganise catering for corporate events or meetings as required\n\nCreation and maintenance of key holder rota and ensure it is adhered to\n\nBuild and maintain excellent relationships with the onsite building management team\n\nResponding to Facilities tickets in a timely manner\n\n💼 General Business Support\n\nRaising Purchase Requests/Orders to suppliers using ERP system\n\nSupporting travel bookings\n\nOther reasonable business support tasks as requested by the Business Unit\n\nQualifications\n\n📁 Previous experience in an administrative or office support role\n\n👔 Professional and well presented\n\n💬 Strong communication and interpersonal skills\n\n🔍 Excellent attention to detail\n\n⏰ Ability to prioritise tasks and work to deadlines\n\n🤝 Flexible, positive and team-oriented approach\n\nAdditional Information\n\n🌟 Why Join Us?\n\n✨ Be part of dynamic construction and engineering projects\n✨ Work in a collaborative and professional environment\n✨ Develop your skills within a structured and well-supported team\n\n Please be aware that many roles at Assystem are subject to both security and export control restrictions.\n\nThese restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation.\nAll applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks.We will consider Inside IR35 Contractors or permanent staff.\n\nNOTICE TO CANDIDATES ON RECRUITMENT FRAUD - We are committed to safeguarding candidates from fraudulent activity associated with our recruitment process. Please note that we will never offer specialist CV writing services, request payment or ask for sensitive personal information during the recruitment process.\n\nWe are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people’s ability to dare are the only things that matter !. Bring your unique contributions and help us shape the future

We’re looking for a highly experienced and detail-oriented Payroll Officer to manage and execute payroll operations within the fast-paced utilities and construction sectors. • End-to-end processing of monthly payrolls and fortnightly for diverse employee groups, including site and office-based teams., • Support the rollout of new payroll systems including data migration, testing, and training., • Collaborate with IT and finance teams to streamline payroll processes and reporting., • P11D and Year-End Reporting. Prepare and submit P11D forms for employee benefits and expenses in line with HMRC guidelines. Assist with year-end processes including reconciliation, audit support and statutory reporting., • Maintain comprehensive payroll records and documentation particularly relating to regulatory audits., • Generate payroll reports and analytics to support finance and operational leadership., • Ensure compliance with UK payroll legislation, HMRC reporting, and industry-specific pay practices (e.g. travel and subsistence, shift patterns)., • Collaborate with HR, Finance, and site managers during mobilisation and demobilisation phases of projects. Experience and Qualifications • Experience with payroll systems (e.g. ADP, PeopleHub, Sage) and time management tools., • Strong knowledge of UK employment and tax legislation., • Advanced Excel skills and familiarity with financial and HRIS systems., • Confident communicator with a proactive and solution-oriented approach. Preferred Attributes, • Experience managing multi-site, project-based payrolls., • Understanding of CIS (Construction Industry Scheme) and contractor compliance. We offer a competitive salary based on experience along with a full benefits package. Network Plus is proud to be an Equal Opportunity Employer. We celebrate diversity and do not discriminate based on race, religion, colour, nationality, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. We are Armed Forces-friendly. We welcome applications from ex-Armed Forces personnel, reservists, armed forces veterans, cadet instructors and military spouses/partners. We understand that privacy and the security of your personal information is extremely important. By applying for this role, you agree to the terms of our privacy policy. Network Plus is an award-winning business delivering essential utility and infrastructure services for the UK’s major providers of gas, power, telecoms, transport, water, and wastewater. We value the variety of experience, perspective, and other points of difference our workforce, clients, and supply chain offer. We are actively working with colleagues across the Network Plus Group to develop an inclusive environment – we want all our employees to feel valued and included to enable everyone to thrive at work and understand the value of their contribution matters no matter their background, identity, or circumstances.

This is a fantastic opportunity for an experienced Test Equipment Design Engineer to join our Production Design Support Team. You will play a key role in a range of Engineering activities, providing Test Equipment design support to the Manufacturing organization and broadening your expertise in an international environment. An exciting career path awaits! Salary: Up to £43,000 depending on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: We have a phenomenal opportunity for an experienced Test Equipment Design Engineer to play a key role in the support of production activities with Production Design Support (PDS) at our site in Bolton. You will act as an integral interface between our design teams and our manufacturing teams while working alongside other support engineers to provide knowledge and support. The role offers the candidate a true engineering challenge in their core discipline(s), whilst providing scope for personal growth and development in other areas of Electronics. Working within Production Design Support (PDS) is a highly rewarding role as you not only see designs coming to life in the manufacturing environment but you can also help to shape the design of the products and test equipment, delivering support to our customers What we're looking for from you: Ideally degree qualified (or equivalent industry experience) with experience of designing product/systems and/or providing support to designs through the manufacturing phase of the product lifecycle. Excellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation. Someone who has a record of accomplishment of on-time delivery Experience of working within a multi-disciplinary team, with an awareness of the challenges and opportunities that this may bring. Someone with a passion for innovation and collaboration. Investigative skills to be able to find Root Causes of design related issues and propose robust corrective actions.Proven design experience in one or all of the following disciplines:- Digital & Analogue Electronics Power Electronics RF and Antenna Design Interconnects Safety Electronics RF Test and measurement principle knowledge Test SystemsOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

Bolton An exciting opportunity within Component Engineering team to help shape and play an important part in support across the business. No two days are the same supporting a large network of teams within the business. Salary: Circa £ 48,000 depending on experience Dynamic (hybrid) working: 2 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: As MBDAs mission to stay at the forefront for Electronics, Electrical, Mechanical & Materials commodities an exciting opportunity has arisen to join our Components team and lend your expertise. You will play a critical role in managing Electronic Components, assessing market trends and technical risks. The role demands a passionate professional who can lead in an Electronics or RF semiconductor specialism. The role requires technical advisement to a large amount of stakeholders across the business from Projects, Engineering teams, Procurement, Customer Service Support and many more. You will be accountable for providing Technical advice and reporting on risks, working with suppliers and understanding the needs within MBDA to suit the requirement of our ever-evolving business needs. As the Principal Electrical Component Engineer, you will maintain your expertise in specialist areas and ensure that this expertise is effectively passed to others, including participating in design reviews, training and other development activities, as appropriate, enabling MBDA to maintain its capability. There is also the opportunity to support and lead international collaboration within the company, helping define best practice and manage the adoption and adherence of agreed methodologies The Component Engineering team you will be a part of has been vital to our product delivery by providing highly sought after subject matter expertise when it comes to the individual's relevant commodity experience. The team operates from both Stevenage and Bolton sites, representing a diverse group of friendly supportive colleagues who pull together when needed to achieve our mission. What we're looking for Knowledge or experience within an electronic component discipline. Knowledge of electronic suppliers especially in semi-conductors Appreciation of REACH and RoHS regulations. Strong communication skills both written and verbal. Pro-activeness and self-motivation to improve self, improve process, and get the job done. It would be advantageous if the candidate has worked in supply chain and knowledge of Electrical and electro-mechanical products. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

Bolton Have a direct impact on MBDA UK's external collaboration with its current and future Supply Chains, managing engagement with the UK Network of Trade Bodies, Trade Shows, Regional Defence & Security Clusters and Regional Aerospace Alliances to meet innovative suppliers. Salary: Up to £45,000 depending on experience Dynamic (hybrid) working: Working on-site and off-site at events as and when required to fulfil the role Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: To remain at the cutting edge MBDA UK needs to constantly develop, adapt and adopt new technologies. Working together with our current and future potential partners helps to develop concepts and deliver game-changing solutions. This role, reporting to the UK R&T (Research & Technology) Procurement Executive, is a key contributor to the success of embedding Open Innovation into all aspects of how we do procurement, ensuring we have the right levels of engagement with the UK Network, enabling MBDA UK to collaborate with our Supply Chain Partners, including SMEs, research partnerships & academia. You will actively support MBDA UK's reporting on and evidencing our progress with the UK Supply Chain, addressing Government policy and MOD focus on the UK Defence supply chain through vehicles such as the Social Value Act with Prime Contractors, the Governments Defence Industrial Strategy, MBDA's Portfolio Agreement with the MOD and the MOD SME Action Plan. As part of the MBDA UK R&T Partnership team you will work with colleagues across Procurement and all other functions of the business to identify opportunities for MBDA to collaborate in an Open Innovation manner. You will be the Key point of Contact for the MBDA UK Procurement Collaborate to Innovate (C2I) Open Innovation initiatives. As such the main skill required is management of people through external and internal relationships. Externally, you will assess suppliers you meet, manage the collection of their capability data and manage their expectations. The role will manage relationships with the UK Network ensuring MBDA UK is constantly reaching out to find new sovereign capability. Internally, the role is responsible for managing the delivery of all C2I events and initiatives, managing people from around MBDA UK to support these initiatives. As part of the external collaboration responsibilities you will be expected throughout the year to represent MBDA UK at various off-site events and trade shows which will require overnight stays. Some of these events you will have planned and you will attend as part of a team that you will manage and some you will attend individually. You will present on behalf of MBDA UK at events when required. As MBDA is a transnational company there will be some opportunities to travel internationally to support similar events. As the Key point of Contact for C2I, you will look to continuously improve the initiatives and deliver greater value for money year on year. You will use the data collected through the year to provide evidence internally and externally of the impact that Collaborate to Innovate is having for MBDA UK, e.g. new suppliers on boarded, work placed and money spent. The R&T Partnership team is part of MBDA UK's Procurement function, we look to find new capability from new and existing suppliers. As such we collaborate daily with a variety of different people internally and externally. This role is a key part in ensuring that we continue to search everywhere and provide opportunities to all types of organisations to talk to us and share their capabilities with us. Our impact has a direct link to the capabilities of our products which support our Armed Forces and their role in protecting our nations. What we're looking for from you: A passion for collaboration and innovation, working with people to deliver change. Experience in delivering value from managing and planning collaborative events. A confident team player who can deliver results through skilful collaboration. Experience in managing data to evidence impact. Commitment to lead by example, proactively addressing challenges to deliver success. The drive and enthusiasm to keep searching for suppliers with disruptive technologies and innovations.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-LA1

Were recruiting an Electrical Wiring Technician to join a specialist Calibration & Maintenance team supporting high integrity defence manufacturing. This is a hands on, bench based role focused on electrical fault finding, bespoke cable repair, and test equipment maintenance ideal for someone with strong wiring, diagnostic, and drawing interpretation skills who enjoys precision work. . What youll be doing Fault find and repair bespoke cable assemblies to technical drawings Carry out surface mount repairs on CCAs Maintain and repair electrical & electronic test equipment to component level Conduct PAT testing across the manufacturing site Perform safety systems testing in line with documented procedures Support production by ensuring STTE availability and reliability Work to strict tool control, FOD, ESD, and quality standards What were looking for Qualifications (Essential Pathways) You must hold one of the following: Advanced / Level 3 Electrical, Mechanical, or Manufacturing Apprenticeship OR Level 3 academic qualification (ONC / Diploma or equivalent) AND Level 3 vocational qualification (NVQ) (NVQ not required if a Level 3 apprenticeship standard has been achieved) Desirable (not essential) IPC 620 certification / Dynamic Cabling training Experience in electrical wiring, cable assembly or test & measurement Background in aerospace, defence, or other regulated manufacturing environments Why consider this role? Technically engaging, hands on electrical work Stable 12 month contract within a long term defence programme Clean, well controlled manufacturing environment Work alongside experienced technicians and engineers What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. TPBN1_UKTJ

Our client, a long-standing partner to the UK Ministry of Defence, is seeking an experienced Manufacturing Bid Manager to play a key role in winning and shaping complex manufacturing programmes. This is a high-impact role sitting at the interface of manufacturing, commercial, and business winning , with direct influence over cost strategy, industrial assumptions, and bid success across major defence programmes. What youll be responsible for Manufacturing Leadership in Bids Lead manufacturing input into bids from early opportunity through submission Define scope, assumptions, and industrial strategy within the Bid Directive Position manufacturing as a value-adding contributor to business winning Costing & Commercial Input Build and validate manufacturing cost models (direct, indirect, materials, overheads) Develop evidence-based 3-point estimates using Excel and historical data Ensure cost assumptions are robust, auditable, and aligned to policy Bid Development & Stakeholder Engagement Produce clear, compliant and competitive bid material (PowerPoint) Assess manufacturing risk, capacity and deliverability across programmes Work closely with New Business, Commercial, Engineering and Operations teams Provide forward visibility of upcoming bids and market intelligence Continuous Improvement & Strategy Apply lessons learned to improve future bids and cost competitiveness Support functional and strategic change within Manufacturing Raise the profile and impact of the Manufacturing Bid Team across programmes What were looking for Proven experience in manufacturing / operations-led bidding within a complex or regulated environment Strong understanding of end-to-end manufacturing (procurement to delivery) Commercially astute, with hands-on experience building manufacturing cost models Confident producing and presenting bid packs to senior stakeholders Able to articulate costing logic clearly and support audit requirements Comfortable working across multiple bids to tight deadlines Proactive, structured, and resilient in a fast-paced bidding environment Backgrounds from defence, aerospace, automotive, rail, or similarly regulated manufacturing environments are particularly relevant. Why consider this role Direct impact on major UK defence programmes High visibility role influencing industrial strategy and cost credibility Work at the heart of business winning, not just delivery Collaborative, senior-stakeholder-facing position What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance : British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. TPBN1_UKTJ

We are seeking an experienced and highly motivated Principal Product Assurance Engineer to join the Quality Assurance team in Bolton, providing support to the Manufacturing teams. Salary: Circa £50,000 depending on experience Dynamic (hybrid) working: 4 - 5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... The opportunity: Facilitating practical problem solving activities, determining root causes and the effective implementation of robust corrective actions using the relevant quality tools Carrying out of process audits, issuing non-conformances and facilitating root cause and corrective actions Frontline provision of non-conformance management supporting the manufacturing functions, including the administration of non-conformities and containment activities Collation and analysis of non-conformance data through the business tool, Google NLP, highlighting any adverse trends and risks to the business and highlighting opportunities for improvement. Managing customer concerns and escapes, dealing with Inter company facilities across Europe including France, Italy and Germany and external customers Managing inscapes between business units within manufacturing Interface with the programmes quality representative and the wider quality teams, sharing data packs and progression of non-conformities and improvements Approval of FAI's, C of C's and other product related documents where required Supporting the successful transfer of new products into manufacturing, verifying PFMEA's, Risk register actions and supporting Industrial Validation activities What we're looking for from you: Able to demonstrate relevant work experience ideally backed up with qualifications Demonstrate excellent analytical skills with the ability to use data to identify trends and drive improvements Electrical / electrical test experience would be an advantage Ability and confidence to report to all levels of the business Strong practical problem solving skills being able to lead and facilitate activities leading to improvements Good planning and organising skills to ensure multiple tasks are prioritised and monitored to deliver set objectives Highly self-motivated and demonstrate a determination and persistence to deliver results despite obstacles and setbacks Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-CT1

Bolton This role offers a fantastic opportunity to broaden your interpersonal and technical skills whilst working on complex and varied projects. You'll be working with highly talented and motivated colleagues in a friendly and supportive environment whilst enabling your personal and professional development! Salary: Circa £55,000 depending on experience Location: Stevenage or Bolton sites (We may be able to offer a relocation package for this role) Dynamic (hybrid) working: 2 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: Our PCB Layout team is responsible for providing a full PCB Layout Service to all Internal Programmes. These span all technologies from PTH boards to complex multilayer, rigid/flexi-rigid, surface mount, impedance matched, RF etc. This is a unique and exciting opportunity to develop your technical skills across our broad range of products. You'll be working closely with engineers and PCB suppliers developing complex PCB Layouts based on technical requirements (electrical, mechanical, thermal and environmental). This can entail developing and adapting emerging technologies to meet our high reliability requirements, whilst maintaining a high production yield, delivered on time, on cost, on quality. You'll also mentor and participate in knowledge sharing with other team members playing an active role in their own and your development. Should you wish to be based out of our Bolton site, regular travel to our Stevenage site will be required to meet with our design team, project designers and fulfil your training needs. This is an essential requirement. What we're looking for from you: Extensive/specialist experience in one or more areas such as RF/High speed/Analogue/Power/SI or EMC Good negotiation and influencing skills to ensure design requirements are suitable for production processes Ability to lead and support design reviews as well as new technology introductions both national and international. Substantial knowledge and experience of PCB design and best practices for PCB layout for high reliability products. Substantial knowledge of PCB fabrication processes and technologies (materials, stack-ups etc.) Strong communication skills to facilitate regular face-to-face and electronic communications with all relevant stakeholders including our international partners.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

This role provides a unique chance to shape how MBDA undertakes production testing. Salary: Circa £50,000 depending on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking. Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more.The opportunity: This opportunity is for a Principal Test Engineer to join the Manufacturing organisation supporting test system introduction and test and diagnostics of electrical/electronic weapon systems and sub-assemblies during the development / early production phase. You will work as part of the Manufacturing UK Test Engineering function, responsible for development testing and ensuring production readiness of new products and their test solutions. Providing Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Supporting Test Facility introduction and ensure that appropriate configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Supporting testing of electrical/electronic weapon systems, sub-assemblies and circuit cards, with diagnosis of development test failures down to circuit card and potentially component level, including identification of proposed remedial and corrective actions. Working closely with Operations, design teams and other stakeholders to overcome any technical challenges. Providing technical support and advice to the Test Engineering Team Lead and guiding and mentoring less experienced test engineers within the team.You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of personnel ranging from apprentices and graduate engineers through to experienced technical practitioners, all striving to deliver technical excellence across a number of different products in development and production. What we're looking for from you: Minimum Qualification Level Level 4 or greater in Engineering (preferably Electrical, Electronic, Aerospace or Mechanical), Physics or Maths. Must include modules for Electronic Principles (digital or analogue) or Electrical Principles. Several years' experience in related industry / manufacturing. A good understanding of electrical/electronic and RF measurement and test principles and test equipment, as well as systems-level functional testing. Experience of the product development lifecycle and supporting processes, in an electronics manufacturing environment. Significant experience of using both manual and automated test equipment, preferably in a defence organisation or similar manufacturing environment. The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives, whilst being available to support others. Good verbal and written communication skills, including working within a team, generation of test specifications, operator instructions and technical reports based on higher-level requirements.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Are you an experienced Electrical Test Technician with strong fault finding skills and a background in regulated manufacturing or defence environments? Were supporting a long established UK defence organisation working on mission critical programmes. This role involves hands on electrical testing, certification and fault diagnosis of complex electronic products in line with strict quality and safety standards. Key Responsibilities Electrical testing of electronic equipment and assemblies Test setup, equipment use and calibration awareness Fault finding and basic rectification at equipment level Accurate completion of test records and documentation Working to defined workmanship, safety and quality procedures Essential Experience & Qualifications Completed Level 3 Apprenticeship in Electrical, Electronic, Mechanical or Manufacturing Engineering or Level 3 Engineering qualification (ONC/BTEC) with relevant NVQ Level 3 Proven electrical test experience (mid to senior level) ESD awareness and manual handling knowledge No colour blindness What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. TPBN1_UKTJ

Guidant Global is partnering with a leading UK defence organisation to recruit a hands on Electronics Test Engineer to support the manufacturing test and fault diagnosis of complex electrical and electronic assemblies. This is a practical, production based role focused on diagnosing faults down to circuit card and component level, working directly with test equipment in a manufacturing environment not a desk based design role. What youll be doing Supporting manufacturing test and diagnostics of electrical and electronic sub systems Investigating failures down to circuit card and component level Using a wide range of manual and automated test equipment Introducing and supporting new test facilities, specifications and operator instructions Working closely with production and quality teams to maintain build schedules Contributing to defect reviews and corrective actions within a controlled defence environment What were looking for Essential HNC (or equivalent) in Electronic / Electrical Engineering Strong hands on experience with electronic test and fault finding Good understanding of digital and analogue measurement techniques Experience using equipment such as oscilloscopes, DMMs, signal generators and power supplies Comfortable producing test instructions, specifications and technical reports Desirable (not essential) RF / Microwave exposure at sub system level Experience with automated test equipment (ATE) Environmental or high voltage testing awareness Defence or regulated manufacturing experience SAP exposure Test equipment youll regularly use Oscilloscopes, DMMs, power supplies, signal generators Spectrum analysers / VNAs (where applicable) RF measurement equipment in a controlled test environment Why this role Hands on engineering real faults, real test equipment Stable, long term defence programmes Supportive engineering team Clear processes and production support (not firefighting) What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. TPBN1_UKTJ

Bolton Join the Land Ceptor team and work to support the British Army in realising the full potential of its latest Ground Based Air Defence capability and tailoring this capability for the needs of emerging export customers. In either case, you'll be building on world-class design: incorporating new ideas, functionality and technology to deliver to our customers. Salary: Circa £48,000-£53,000 depending on experience Dynamic (hybrid) working: 2-3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship . Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: As part of the Physical Systems Design & Certification team, you will help manage the overall physical functionality and certification of the in-service system while supporting the evolution of the weapon system for future customers. What we're looking for from you: A highly motivated self-starter who can work both independently and as part of a team on a number of varied tasks A good understanding of systems engineering principles, processes and practices An appreciation of requirements engineering at System, Subsystem or Component level Knowledge associated with the design and build of hardware Awareness of test procedures required to verify products and the gathering of evidence to enable certification (experience working with defence standards, Mil Spec, etc. ideal, especially environmental and EMC) Experience preparing and conducting ground trials and gathering evidence from physical activities would be advantageous Confidence in presenting technical engineering information and promoting decision making Experience of technical report writing and use of configuration management tools A Logical approach to problem solvingWhat's in it for you? The opportunity to be instrumental in the evolution of the Land Ceptor system for both UK and export customers The ability to grow your career within a wide engineering sphere with an exposure to all stages of the engineering product lifecycle A challenging and varied scope of work with a good mix of short and long term objectives Opportunities for short term UK and European travel You will be responsible for defining, reporting and managing the workload in this areaOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-KF1

We're looking for a highly motivated individual to join our Manufacturing New Business Bid Team. Supporting both the Design (New Concept) & Manufacture (Series Production) phases of bidding, across MBDA's full range of programmes and projects. Salary: Circa £45,000 depending on experience Dynamic (hybrid) working: 1-2 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking. Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more.The opportunity: To join a dynamic, forward thinking bid team, focusing on complex New Business D&M-Phase bid generation. This is a unique opportunity to build a strong stakeholder management network covering all of Manufacturing Programmes, projects and for all products. In this role your main focus will include interpreting bid directives, cost modelling, utilising multiple data sources and creating 3-point estimations. You will have the ability to perform advanced data analytics to inform bid content, applying robust methodologies with strong commercial acumen and a focus on Risk and AED's. Experience in generating an auditable manufacturing cost base for bids in D&M Phase or similar is desirable and excellent presentation skills are required as all bids are presented to the Senior Management Team (SMT) for approval. This role will require a resilience in delivering to demanding timescales and priorities. The team has grown in recent years evolving the process of generating cost models by introducing new methodologies and enhancements to how a bid is populated. By ensuring each bid is auditable, with tangible source data and fresh ideas. We welcome your ideas to help our continuous improvement to support bidding excellence. The position has become available due to a significant increase in both D & M-Phase Bidding activity, with the need to grow the team further in the generation of compliant complex bids on Major Programmes working closely with our Manufacturing Programmes team, in a collaborative, high-performing environment. What we're looking for from you: Experience working on complex bids with a proven record of accomplishment in the creation of auditable cost models, proposals and bids Commercially astute as working with cost models to generate costings for direct/in directs, materials and other costs associated with manufacturing of products Experience in the defence industry, particularly working on bids in Concept/Development phase through to Manufacturing phase would be advantageous An enthusiastic and driven individual, bringing tenacity and resilience to overcome challenges and deliver consistently strong bids Excellent communication skills, as the Bid Team work across all programmes, there are a lot of stakeholders and it is important to create own networks and build strong relationships experience of working within multi-functional teams Ability to work unsupervised and as part of a team, with a proactive approach Ability to articulate theory that has been applied to a costing approach and ensure evidence is collated for audit purposesOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Bolton Reporting directly to our UK Head of Excellence, you'll act as a strategic architect for product integrityacross our engineering and manufacturing functions. This is a high-visibility role for amentor who can bridge the gapbetween design intent and world-class production, ensuring mission-critical technology is "designed for excellence" long before it reaches the shop floor! Salary: Circa £60,000 depending on experience Dynamic (hybrid) working: 3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . Private Medical Insurance: Eligible employees are enrolled as standard into the company funded Private Medical Insurance benefit.The opportunity: Operating within theQuality Excellence function, you will lead the shift toward a proactive, "right-first-time" culture. We are looking for a coach and facilitator to tackle sophisticated challenges, usingFMEA and DMAICmethodologies to empower our teams and ensure zero-defect excellence across our entire product portfolio. It's a genuinely exciting chance for a determined individual to drive real change while pursuing their own career growth. We are seeking a time-served Quality professional to bridge the gap between product design and world-class manufacturing. You will own the Product Risk Mitigation strategy-utilising DFMEA to 'design out' failures, PFMEAs/Control Plans toensureoperational excellence, and DMAIC cycles todrivecontinuous improvement in production yields. Your goal is simple: zero-defect product launches built on a foundation of proactive quality and robust process controls. Day to day focus: Risk Mitigation:Support the quality and engineering functions through APQP toolsets. Facilitate workshops and coach teams onDFMEA and PFMEAbest practices (based on relevant standards and industry best practices) to ensure risks are identified and "designed out" early in the project lifecycle. Design to Production Link:Guide the transfer of "Special Characteristics" and Severity ratings from design intent into practicalControl Plans. Partner with manufacturing to ensure that risks identified in FMEAs are managed with realistic measurement methods and robustcontrol plans, ensuring operational readinessfor the production team. Process Stability & Coaching:Support continuous improvement by mentoring teams throughDMAIC cyclesto stabilise production and improve yields. Support others to use data to monitor performance and reduce variation from the launch phase throughout the entire product lifecycle. Problem Solving & Lessons Learned:Lead and coach theRoot Cause Analysisprocess when quality issues arise. You will ensure that teams know how to feed findings back into theirFMEAs and Control Plans, maintaining them as "living documents" that prevent the recurrence of failures. Standards & Audit Support:Act as the subject matter expert for risk-related audits, ensuring our risk management meetsEN9100 / ISO 9001standards. Utilise Action Priority logic to help the team prioritise engineering changes and validation testing for high-risk items.What we're looking for from you: Professional Experience:5+ years in a mission critical, regulated environment (Defence, Aerospace, or Automotive). Experience inleading teams and mentoring staff on quality principles is essential. Technical Background:An engineering background (HNC/HND or higher) with expertise inelectronics, manufacturing and design. Standards: Excellent knowledge ofEN9100 / ISO 9001. Competent in theAIAG & VDA FMEA HandbookorSAE J1739methodologies. Product Risk:Proven track record in managing product risk throughDFMEA, DFx (Design for Excellence), PFMEA,and the development of robustControl Plans. Problem-Solving & Tools:Highly Proficient in Root Cause Analysis (8D, 5-Why) and experience usingFMEA software(e.g., APIS IQ-FMEA, Relyence, or similar). Lean Six Sigma, Certified Black Belt:A proactive approach - the ability to identify and mitigate risks early to prevent field failures. Experience withDMAICcycles is preferred. Influencing & Facilitation:A strong influencer and skilled facilitator, bridging the gap between design and shop-floor teams through coaching and mentoring to drive a "Quality First" culture.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-CT1

Electrical Calibration Technician Electrical Test Equipment (Defence) Are you an Electrical Calibration Technician with hands on experience calibrating electrical and electronic test equipment such as multimeters, oscilloscopes and power supplies? Guidant Global is partnering with a leading UK defence organisation to recruit an Electrical Calibration Technician to support the calibration and maintenance of Commercial Off The Shelf (COTS) and Special to Type Test Equipment (STTE) used within a highly regulated, safety critical manufacturing environment. This is an excellent opportunity to work on technically challenging equipment that directly supports critical defence programmes. Key Responsibilities: Calibrating and maintaining electrical and electronic test equipment, including multimeters, oscilloscopes, power supplies and function generators Carrying out initial and routine calibration of COTS and bespoke Special to Type Test Equipment (STTE) Ensuring factory and proprietary test equipment remains compliant with documented procedures Completing calibration, maintenance and repair activities in line with departmental processes Producing accurate, traceable calibration and maintenance records to support audit and quality requirements Working collaboratively within a multi disciplined Operations and Engineering environment What do you need?: Qualifications (Essential Pathways) You must hold one of the following: Advanced / Level 3 Electrical, Mechanical, or Manufacturing Apprenticeship OR Level 3 academic qualification (ONC / Diploma or equivalent) AND Level 3 vocational qualification (NVQ) (NVQ not required if a Level 3 apprenticeship standard has been achieved) If you have strong, relevant calibration experience in a regulated or manufacturing environment and are unsure on qualification alignment, applications are encouraged for discussion. Technical experience & skills Experience calibrating electrical test equipment (e.g. power supplies, multimeters, oscilloscopes, function generators) Exposure to calibration of COTS and/or bespoke test equipment Ability to produce clear, comprehensive calibration and maintenance documentation Understanding of in service inspection and testing of electrical equipment Experience working with Environmental Stress Screening (ESS) facilities is desirable Comfortable following manufacturer instructions, procedures and quality standards Familiarity with SAP or similar systems is beneficial (not essential) What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. All employees get training and development opportunities. TPBN1_UKTJ

An opportunity has become available at the MBDA UK Bolton site to work as part of a team of experienced engineers to support the increasing product delivery requirements, maintaining and improving processes and standards to achieve this. Salary: Circa £43,000 depending on experience Dynamic (hybrid) working: Minimum of 4 days per week on-site due to workload classification Security Clearance: British Citizen only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more. Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: As a Process Engineer, you will work as part of the Printed Circuit Card Assembly (PCBA) manufacturing business unit with a focus on the manufacture of our products. The Circuit Card Assembly (CCA) Business unit produces high complexity products with a high mix, low volume output. The business unit is rapidly growing in order to achieve the large backlog of orders over the next 5-10 years, with the production output more than tripling. You will be a part of the process engineering team working closely with test, manufacturing and quality engineers whilst building strong relationships with stakeholders including the operations, design support and calibration and maintenance teams. This role reports to the Principal Process Engineer within the CCA business unit. The Role: You will be responsible for various technical aspects of PCBA. This will involve working on creating and maintaining standards, identifying and carrying out continuous improvement activities, solving technical problems, all whilst considering quality as intrinsic to the role. The opportunity also allows you to grow your knowledge within manufacturing as part of development into future opportunities. Industrial Validation, manufacturing architecture and factory of the future are some of the work packages that can provide stretch objectives for such growth. Key Responsibilities: Supporting the manufacturing area in its growth and rate increase. Carrying out improvement activities - data gathering and data analyses to understand impact and effort required. Support the Non-Conformance process - root cause analyses, implementation of effective corrective and preventative actions. Interface with the design authority during the product development phase to ensure optimised Design for Manufacture (DfM), and in the production phase for management of change implementation. This includes supporting the New Product Introduction team in creating/improving design rules for manufacturability of circuit cards. Ensure processes and equipment contribute to a safe working environment following both company processes and legal obligations, meeting internal quality requirements. Develop and maintain manufacturing methods, processes and equipment with a data-based approach, using methods such as SPC, to support a robust manufacturing system. Resolve issues and queries with the operations team on the shop floor. Perform and review PFMEAs. Develop tooling to aid the manufacturing process. Create and modify machine programmes for the assembly, manufacture or inspection of circuit cards.What we're looking for from you: An understanding and appreciation for quality control. Analytical mindset with the willingness to learn. Proficient in computer and internet use, including proficiency in commonly used applications such as Microsoft Office Suite & manufacturing systems such as: ERP systems, Manufacturing Execution System etc. Experience in Circuit Card Manufacturing or Design is beneficial. Knowledge of PCBA Processes and Technologies is beneficial. A proactive approach to process improvements. QUALIFICATIONS (Must Have) Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21 Formal further education certificate to HND or equivalent in a relevant subjectALTERNATIVELY BEng/BSc in relevant Engineering/Technical DegreeOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Bolton An opportunity has arisen within our Customer Support business area for a number of Integrated Logistic Support Managers to ensure our ability to support our next generation Missile systems to our worldwide customer base. These opportunities will give you considerable scope to improve programme management skills, develop Customer facing skills and promote your profile internationally within MBDA. Salary: Circa £65,000 depending on experience Location: Stevenage, Bristol or Bolton Security Clearance: British Citizen or a Dual UK national with British citizenship . Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary Pension: maximum total (employer and employee) contribution of up to 14% Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Training and Development: Excellent career progression, training and career development opportunities Possible Relocation AvailableThe opportunity: An opportunity has arisen within our Customer Support business area for a number of Integrated Logistic Support Managers to ensure our ability to support our next generation Missile systems to our worldwide customer base. These opportunities will give you considerable scope to improve programme management skills, develop Customer facing skills and promote your profile internationally within MBDA. What we're looking for from you: ILS Experience essential A broad based engineering background, a degree level qualification in a numerate / technical discipline would be beneficial, with knowledge and experience of Weapon Systems support models Understanding of predictive logistics models Prioritisation and ability to deal with multiple issues on a regular basis Strategic planning of support work, from supply chain through to customer deliveryOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

Join MBDA UK Ltd as a Senior Test Engineer and become an integral part of our Manufacturing team. This role presents an outstanding chance to contribute to the testing of our products. By joining us, you will have the opportunity to play a crucial role in upholding the highest standards of quality and reliability for our products. Salary: Circa £45,000 dependent on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Training and Development: Excellent career progression, training and career development opportunitiesThe opportunity: This opportunity is for a Test Engineer to join the Manufacturing team supporting test and diagnostics of electrical/electronic sub-systems and circuit cards during all phases of the product lifecycle. You will be providing technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements. Providing Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Supporting Test Facility introduction and ensuring that appropriate configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Supporting testing of electrical/electronic sub-assemblies and circuit cards, with diagnosis of production test failures down to component level. Working closely with Operations, the design teams and other stakeholders to overcome any technical challenges. Always aiming to deliver in line with all programme and quality requirements, whilst maintaining Test Engineering functional governance and pursuing continuous improvement.You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of people, ranging from apprentices and graduates through to experienced engineers, all striving to deliver technical excellence across a number of different missile systems in development and production. What we're looking for from you: Minimum HNC level of qualification or equivalent in a relevant subject (HND/Degree preferred) plus experience in digital and analogue electronics manufacture and test. A good understanding of electrical/electronic measurement and test principles and test equipment, as well as fault diagnosis techniques for electronic/electro-mechanical sub-assemblies. Experience of using both manual and automated test equipment, preferably in a defence organisation or similar manufacturing environment. Familiar with enterprise resource planning and manufacturing execution system programs (e.g. SAP, MES) for recording test activities and generating non-conformance reports and concessions. The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives. Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports based on higher-level requirements. Proven analytical and problem solving skills, with strong attention to detail.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Bolton We are looking for an experienced SAP architect and project manager to support our SAP transformation, delivering new and existing capabilities and to ensure the smooth operation and sustainability of these systems for years to come. Salary: Up to £70,000 depending on experience Dynamic (hybrid) working: 1-2 days per week on-site; depending of the phase of the project, more days on site will be required Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: We are working on a transformation programme to move from our current SAP ECC6 systems to SAP S/4HANA across the MBDA Group, utilising a Greenfield methodology. This strategy will impact a number of domain areas and the implementation of S/4HANA providing an opportunity for each domain to review its use of existing tools and determine a roadmap for consolidation across the Group and deliver the best-in-class tools for our business users. This role will concentrate on the local deployment of the new S/4HANA systems and post-go-live operations and maintenance. Additionally, the role will support the structured handover and manage any additional tasks related to the existing ECC6 environments. This role falls within the Digital Solutions (DS) area of MBDA; part of Digital Excellence (DEx), the DS team focusses on delivering IT solutions that are used to support the business in a variety of domains. What we're looking for from you: Proven expertise in SAP architecture design and implementation. Deep knowledge of integration frameworks. SAP Architect experience - being able to run productions systems, monitor and support an SAP transformation project. To follow and perform the SAP Release Management for the new systems in UK network based on the core model designed at group level. A track record of governing technical standards, ensuring scalability, security, and compliance. Strong stakeholder management skills, able to bridge business and IT with clear communication and strategic vision. Experienced in vendor and partner collaboration.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Bolton Are you prepared to join an outstanding team that is at the forefront of advanced technology? If you are a driven and experienced engineer looking for a chance to contribute to top-tier Laser Directed Energy Weapon (LDEW) systems, then we have the ideal position for you! DragonFire has been and continues to be a boundary pushing weapon system development programme that has significant industry and customer engagement. Thus far the programme has been aimed at developing the UK's first Laser Directed Energy Weapon (LDEW) concept demonstrator, achieving significant success recently with several highly publicised trials activities. Following on from these successes MBDA is looking for flexible and motivated candidates to continue to develop DragonFire into a world class, deployable, LDEW air defence system. Our ambitious plans involve parallel and interleaved streams of pioneering technology experimentation and rapid weapon system development, providing opportunities across the key weapon system domains of Systems Engineering: requirements, design, performance analysis and certification. Salary: Circa £55,000 - £65,000 depending on experience Dynamic (hybrid) working: 2-3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary, depending on grade. Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... The Opportunity The Laser Source Project Engineer (RMO) will work with an external partner to deliver the Laser Source Sub-System for DragonFire. The Laser Source is a high power electro-optical assembly mounted in a mechanical assembly. The Laser Source generates the high energy laser beam. This is integrated to the Beam Director and integrated into a transportable container assembly (both developed by other partner companies). Reporting to the project sub-system lead; this role will be focused on the acceptance and delivery of the Laser Source sub-system, its final assembly, integration, and test. A proven record of complex sub-system delivery and integration is desirable, as is a working knowledge of high energy lasers. The Laser Source RMO will be responsible for: interface management with the external partner, both programmatically and technically; acceptance of and delivery of the Laser Source to final assembly, integration, and test; supporting the functional integration of the Laser Source within the wider sub-system definition; project development in order to continue the evolution of DragonFire.What we're looking for from you: Individuals who have experience in or can demonstrate their ability to: Operate in the early lifecycle of a project, to drive technical direction for the equipment under development and clarify stakeholder needs Worked with third party suppliers and developed technical statements of work and deliverables Develop complex electrical equipment or subsystems and ensure the emergent design is compliant to the project requirements Proactively engages stakeholders and builds relationships that will further the project Lead technical work packages alongside experienced project managers, to demonstrate progress and balance technical risks.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-KF1

MBDA is looking for a number of Software Engineers at varying levels to work in the Software Resource and Capability Team on Test Software. Salary:£40,000 - £75000 depending on experience Dynamic (hybrid) working:3 to 4 Days a week in the office Security Clearance: British Citizen or a Dual UK national with British citizenship . Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity Test Equipment Software UK work to deliver the MBDA UK test capability in partnership with colleagues in Electronic Design, the Test Centre of Excellence and other areas of Software Engineering. Our mission as a function is to facilitate robust and timely test of missile systems and ensure MBDA continues to provide a decisive military capability for our home nations and their allies. Spanning a diverse portfolio of work packages, Test Software UK directly influences the company's product certification, manufacturing output and support activities. Specifically, Test Software UK are responsible for developing and supporting software packages that utilise Test Equipment hardware to configure, verify and validate the conformance and quality of our MBDA UK product range from development, through production and into field test scenarios. It is a multi-disciplined, dynamic, focused and agile team specialising in all aspects of test solution design, including software, hardware, simulation and real-time systems. It is great a place to learn about the company's entire product portfolio, whilst embracing the change to DevOps and other innovative technologies! What we're looking for from you: A software or electronics engineer with transferable talent into software development for test solutions: Strong ability to write software in languages such as C, C++ and C# (Some Python experience would be useful but not essential) motivated to develop and support reliable, high performance, standardised, and documented software. Excellent analytical and design ability, including review and critical analysis 'Can do' and flexible approach - you'll enjoy solving technical problems that sometimes extend beyond the bounds of "software" Keen to work on novel products where the software you produce is time and mission critical Able to communicate effectively with multiple stakeholders, including Systems Engineering, Electronics and Electrical, and Test and ValidationOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

We have an exciting opportunity for an experienced Electronic Design Engineer to join our team and play a leading role in the support of production activities at our state of the art manufacturing facilities. Salary: Circa £42,000-£48 , 000 depending on experience Location: Bolton Dynamic (hybrid) working: 3-4 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: You will act as part of the design team as one of the main interfaces to our manufacturing teams while working alongside other support engineers to provide knowledge and support. The role offers the candidate a true engineering challenge in their core discipline(s), whilst providing scope for personal growth and development in other areas of electronics. Working within design support is a highly rewarding role as you not only see designs coming to life in the manufacturing environment but you can help to shape the design of these products to deliver support to our customers. What we're looking for from you: You'll need to demonstrate a number of the following attributes: · Ideally degree qualified (or equivalent industry experience) with experience of designing product/systems and/or providing support to designs through the manufacturing phase of the product lifecycle. · Proven experience in the design of the following disciplines:- · Analogue and Digital Electronics · Investigative skills to be able to find Root Causes of design related issues and propose robust corrective actions. · Someone who will be prepared to work autonomously if needed, lead the delivery of your work assignments, and actively engage with stakeholders to ensure successful delivery of your outputs. · Excellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation. · Experience in a manufacturing environment and supporting and resolving manufacturing issues and a view to implement Design for Manufacture improvements into the design. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

Bolton We are seeking a highly organized and proactive GenAI Delivery Implementation Specialist with a strong business analyst profile to join the GenAI IT department Salary: Circa £65,000 depending on experience Dynamic (hybrid) working: 2-3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary (Delete for L1-4+) Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The GenAI Delivery Implementation Specialist will also be responsible for defining and applying agile methods and processes, supporting tools, and coaching and transforming the way of working for the teams managing different projects. You will have a proven track record in IT project management, knowledge of AI technologies, and stakeholder management to drive timely, efficient, and high-quality project delivery. This position plays a key role in MBDA digital transformation, consolidating the GenAI project pipeline, engaging stakeholders, structuring each initiative with clear scope, cost, timeline, and resource estimates for successful deliveries. What we're looking for from you: Proven experience in IT project management and/or business analysis roles. Strong understanding of industrial customer support environments. Experience framing and estimating AI and digital innovation projects. Excellent communication and facilitation skills. Structured, autonomous, and delivery-oriented mindset. Proven experience in agile and/or hybrid project environments. Proven experience with tools for agile transformation Proficiency in tools like PowerPoint, Excel, MS Project, JIRA, Confluence, or equivalent. Background in AI or data-driven initiatives. Proven experience/information or references regarding agile transformation and coaching.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Bolton An exciting role has become available in our Test Architect team as a Technical expert involved in all aspects of the Missile Test process. If you have experience Electronic circuit design, testing and failure analysis techniques along with Test equipment design then this could be just the role for you! Salary: Circa £72 ,000 depending on experience Dynamic (hybrid) working: 3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship . Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 27% of base salary Car allowance: £300 per month Pension: maximum total (employer and employee) contribution of up to 14% Private Medical Insurance Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: As the Missile Test and Testability Expert you will be reporting in to the Test and Testability Department Head and, from a Project perspective, into the Project Chief Design Engineer. As Test and Testability Architects (TTA), we are involved in all aspects of the Missile Test process - from the early feasibility studies to series production and in-service support. As a Subject Matter Expert for Missile Test and Testability Architecture you will participate in range of missile programmes using your experience and expertise to improve the definition of test equipment technical requirements by focussing on key areas and removing waste. You'll be managing definition of the project test strategy, Definition of Project BIT architecture including coverage requirements and improving the way we write our specifications across all projects. As a key member on the team you'll be assessing and recommending improvements to our ways of working across TTA and lead the analysis of production test data to spot trends and diagnose failures. There will also be a need for you to lead the analysis and modelling our system to understand the test coverage and generate diagnostic instructions. Day to day you could also be involved in - Participating and supporting Red-Team reviews and activities into critical issues during development and manufacture. Supporting new product bid activities. Identify, document and deploy best practice across the department and within projects. Mentor and actively support members of the Test & Testability department. Lead / participate in roadmap development activities.What we're looking for from you: Educated to degree level (or equivalent) with significant experience of electronic test at all stages of project lifecycle, including: Electronic circuit design, testing and failure analysis techniques. Test equipment design. Experience in requirements capture. Project management and planning. Provide technical leadership to all Test related issues across design projects with proven experience in Test Equipment requirements capture and specification. Experience in DfT and testability Proven ability to influence senior stakeholders within the business relating to technical direction Support departmental strategy and support the department head with recruitment of the right people into the team. Strong interpersonal and well developed communication skills (written & verbal).Willingness to travel when required (UK and EU). Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SF1

An exciting opportunity for an experienced Electrical Fitter to join our Manufacturing Operations team in a fast-paced but friendly and inclusive Manufacturing environment. Salary: £42,558 Dynamic (hybrid) working: 5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: This opportunity is for an Electrical Fitter to join the Manufacturing team supporting assembly and certification of a variety of electrical hardware builds, ranging from small fixtures through to complex missile systems, during all phases of the product lifecycle. You will be providing operations support to ensure programme targets are met to agreed time, cost and quality requirements. Ensuring that completed hardware builds are manufactured in accordance with drawing requirements and specifications; Maintaining a safe working environment in-line with 5S policies Always aiming to deliver in line with all time, cost and quality requirements Ensuring assembly unit production costs are met Maintaining, to the highest level, workmanship standards and product quality Ensuring the completion of all manufacturing documentation Working closely with fellow Operators, Engineering and Quality to overcome any technical challenges and offer feedback for continuous improvement activitiesYou will be working with a large team of multi-disciplined operators in a fast-paced but friendly and inclusive Manufacturing environment. The team has a great mix of people, ranging from apprentices through to experienced skilled technicians, all striving to deliver technical excellence across a number of different missile systems in development and production. What we're looking for from you: Qualifications required (all of the below): Electrical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) Electrical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.) Electrical Engineering / Manufacturing Level 3 vocational qualification (NVQ) Practiced in reading and understanding assembly drawings and planning instructions Fully conversant with all Manufacturing equipment, tools and measuring instruments Uses their initiative and can work without close supervision Goes 'the extra mile' to get work finished to a high standard Flexibility and adaptabilityOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

As the security awareness and intelligence officer, you will be a member of the UK Security Services team within MBDA UK, contributing to the delivery of security awareness and playing a key role in developing and promoting a strong, positive security culture throughout the business! Salary: Circa £35,000 depending on experience Dynamic (hybrid) working: 3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... The opportunity: You will play a central role in strengthening and supporting our security culture by ensuring all MBDA UK individuals understand security risks that could impact the business and its people. You will shape how individuals recognise and respond to existing and emerging security risks, whilst translating security information into clear and actionable guidance. In this role, you will monitor and assess a wide range of information feeds to ensure that relevant insights are analysed and communicated to the business appropriately to support informed decision making. You will also deliver bespoke briefings to different areas of the business across all MBDA UK sites, covering a variety of security awareness and travel security topics to strengthen the mitigation of security risks. Additionally, you will maintain and develop positive relationships with internal stakeholders as well as external partners and relevant bodies. Promoting a collaborative approach to security across all functions. What we're looking for from you: Proven experience in delivering awareness or training, preferably within a security focussed environment. Strong stakeholder engagement skills, with the ability to challenge, advise and communicate information confidently and clearly to all audiences across the business. An understanding of security related disciplines and handling of sensitive information. Strong analytical mindset, with the ability to turn information into assessment-based actions. A proactive approach to working, particularly when updating or delivering security initiatives and projects. Ability to hold Security Vetting level of Security Clearance. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RS1

We are seeking an experienced and highly motivated individual to join the Quality Assurance team in Bolton, providing support to both the Manufacturing and Supply Chain teams. Salary: Circa £60,000 depending on experience Dynamic (hybrid) working: 3-4 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity? Are you a Quality professional with a passion for problem solving? Working with our Manufacturing & Supply Chain teams you will lead the Quality Assurance activities on one of our complex Weapon System production lines, thereby supporting delivery of UK strategic defence needs. Co-ordinate delivery of the Quality Assurance activities across the Manufacturing Business Units to reduce production programme quality risks. Timely resolution of production line issues, by leading multi-functional teams through application of industry standard problem solving tools and techniques. Lead delivery of assurance activities associated with industrialisation of our production lines. Identify and mitigate production risks through implementation of PFMEA's, Control Plans, Special Process validation, etc. Lead Project Manufacturing Non-Conformance Panels, escalating critical issues to senior management. Ensure implementation of any Project specific non-conformance processes within manufacturing. Conduct non-conformance data analysis to identify trends, root causes and opportunities for improvement. Primary interface to Customer for project contractual deliverables out of our Bolton production facility. Additional role responsibilities: Support the Project team in developing cost effective project planning to assist in on time delivery of all contractual deliverables, whilst meeting MBDA policy and process. Collaborate with the engineering and manufacturing teams to optimise the manufacturing processes. Support the delivery of Product Life Cycle Gate reviews, providing assurance of deliverables and ensuring timely closure of actions. Provide Quality reporting into Project, Manufacturing and Functional Programme Reviews. Drive the Quality culture within the Manufacturing domain to ensure continuous improvement and delivery of the quality strategy and risk assessments. Certify and release product to our customer in accordance with the contractual requirements. What we're looking for from you: Preferably degree educated, or substantial experience in Quality Management Practitioner of current QA problem solving methods (8D, Six Sigma, DMAIC, etc.) Good working knowledge of Microsoft Office packages (PowerPoint, Word and Excel) Excellent interpersonal skills are essential and able to influence others in a collaborative way. Highly self-motivated, and demonstrate a determination and persistence to deliver results despite obstacles and setbacks. Position is based at our Bolton site, but will require provision of support at our other MBDA sites. Some travel (both UK and international) maybe required. What's in it for you? The role provides an exciting opportunity to work in a high technology environment ranging from the manufacture of CCA assemblies through to live build of Weapon Systems. What's great about the team? Join a collaborative and supportive team who work together to contribute to a shared ambition to deliver for our Armed Forces and preserve the company's reputation as the leading provider of Missile and Weapon Systems. Achieve all this while maintaining your work/life balance!! Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-CT1

Bolton This is an exciting opportunity to lead Component Obsolescence and shape your vision of the service. You will work with a wide range of stakeholders across a suite of products providing advice on best practice, guidance and support. Salary: Up to £52k depending on experience Dynamic (hybrid) working: 2-3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: The growing workload within MBDA and increased volatility in all commodity markets, especially the electronics industry, has created an exciting opportunity within our UK Component Engineering Team for an Obsolescence Manager to review, develop and maintain our compliance processes within the Team. Using your expertise, you will manage the pro-active and reactive obsolescence status of thousands of components that are used in our missile and support equipment designs, supporting our customers to manage identified challenges within their designs. A team of Component Engineers are available to assist in the collection of all related data using their relationship with all of our suppliers. Working alongside this team, you will be responsible for both regular and ad hoc reporting on obsolescence component statuses. As the Obsolescence Manager you will be in a unique position where you will have regular contact with all Missile and Equipment Teams, Equipment Centres of Excellence and the Missile Portfolio Group. You will use this to influence the use of correct, coordinated and robust Obsolescence Management across the Company. You will maintain your expertise in obsolescence areas and ensure that this expertise is effectively passed to others, including participating in design reviews, training and other development activities, as appropriate, enabling MBDA to maintain its capability. There is also the opportunity to support and lead international obsolescence initiatives, helping define best practice and manage the adoption and adherence of agreed methodologies across the teams on an international scale. What we're looking for from you: Knowledge and experience with obsolescence management, tools and techniques. Experience or knowledge around the requirements of BS 62402:2001. Excellent communication skills to facilitate regular face to face and electronic communications with all relevant stakeholders. The ability to write clear and concise engineering documentation.Nice to have: Knowledge / experience of tools such as Matrix PLM, SAP, Silicon Expert, IHS etcOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

Are you a Mechanical or Metrology focused Engineer with hands on calibration and CMM experience? As a trusted UK Ministry of Defence partner, MBDA is seeking a Mechanical Engineer to join its Calibration & Metrology team in Bolton. This is a technically engaging role supporting manufacturing across assembly, integration and test, working closely with production, quality and engineering teams to ensure measurement accuracy and equipment performance at every stage of the build process. What youll be doing Deliver hands on mechanical calibration support for COTS (Commercial Off The Shelf) and Special to Type Test Equipment (STTE) Calibrate torque tools in line with ISO 6789 2:2017 Support CMM inspection activities, including operating and updating measurement programmes Provide day to day metrology and measurement support to manufacturing teams, fixtures and tooling Act as a technical point of contact for measurement related queries on the shop floor Contribute to continuous improvement in measurement methods, processes and repeatability Support temperature and pressure calibration activities where required What were looking for Essential: Mechanical Engineering/Manufacturing Apprenticeship (Advanced Level or L3 Standard) AND Mechanical Engineering/Manufacturing Level 4 academic qualification (HNC, diploma, etc.) AND Mechanical Engineering/Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achieved OR Degree in a relevant subject. Proven experience calibrating torque tools to ISO 6789 2:2017 Strong working knowledge of GD&T Hands on experience in dimensional calibration Experience working with CMMs (operation and basic programme creation or modification) Desirable: Temperature and pressure calibration experience Background in manufacturing, defence, aerospace or other regulated environments Experience providing technical support within a production setting Why join? Youll be part of a specialist calibration and metrology function supporting critical defence manufacturing programmes. The role offers technical variety, exposure across multiple manufacturing stages, and the opportunity to work within a quality driven, highly regulated environment where engineering rigour really matters. What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. TPBN1_UKTJ

Facilities Maintenance Assistant Calibration & Compliance Our client, a trusted partner of the UK Ministry of Defence, is seeking a Facilities Maintenance Assistant General Operator to support the Calibration & Maintenance department in a secure manufacturing environment in Bolton. This role is ideal for someone with basic maintenance, facilities or engineering support experience who is looking to develop into a calibration or technical maintenance career . Full training and development are provided. Key Responsibilities Support facilities and equipment compliance across site Carry out routine maintenance and compliance tasks including: ESD testing Electrical safety (PAT) testing LEV filter changes Assist with planned preventative maintenance (PPM) Respond to general/reactive maintenance requests Maintain accurate compliance and maintenance records Training & Progression You will be trained and developed in: Mechanical calibration Electrical calibration Use of test and measurement equipment This role offers clear progression within the Calibration & Maintenance function. What Were Looking For Some experience or exposure to maintenance, facilities, engineering support or compliance (desirable, not essential) Comfortable following procedures and completing documentation Reliable, practical and safety-focused Willingness to learn and develop technical skills Able to work effectively in a team environment What happens now? If your application meets the initial selection criteria, a member of our talent acquisition team will contact you via email to arrange a structured screening call. This conversation will explore your experience, technical background, and suitability for the role in more detail. Security Clearance : British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. TPBN1_UKTJ

Bolton This is a unique opportunity for an experienced Electrical Architect to join the MBDA Weapon System Equipment team and work to support the delivery of a range of product capabilities for the needs of domestic and emerging export customers. You'll be working as part of a world-class design team to sustain and develop our products, both in-service and development: incorporating new ideas, functionality and technology to deliver to our customers. Salary: Up to £65k dependent on experience Dynamic (hybrid) working: 2-3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: Your role will be to develop and define the electrical architecture and requirements of the equipment for all areas of the Weapon System solution, supporting analysis and decomposition to the lower-level sub-system elements and managing all technical elements of the Electrical Power and Control Equipment. Customer requirements in the Land and Maritime Domains will be challenging you to deliver within the constraints of limited physical space and harsh operating environments. Through your regular interaction with stakeholders and customers, using your communication, influencing and leadership skills you will be developing the product development demands with the delivery team, whilst focusing on the overall product picture to enable the 'On Time, On Cost, On Quality' of the technical solution. Maintaining an adaptable outlook in an ever-changing, competitive and challenging working environment will be an advantage. What we're looking for from you: The successful candidate will hold a qualification equivalent to or greater than a City & Guilds Level 3 award covering the requirements for Electrical Installations. Educated to HND Level 4 (or an equivalent qualification) will be advantageous and with appropriate experience, in electrical engineering, having obtained practical application knowledge in the following areas: Electrical Installation Design (in areas other than Building Regulations Part P), covering Extra Low and Low Voltages, and grounding/earthing, screening, and bonding schemes; Certification of installations in accordance with wiring regulations (BS 7671 or equivalent) - specifically for mobile or transportable systems; Design of electro-mechanical machinery and handling equipment in safety critical and complex electromagnetic environments; Platform and Vehicle based power supply, distribution, and management (civil or military); Design and implementation of "Uninterruptable" power systems (desirable); Hands on experience with electrical installations, machinery, testing of electrical installations, testing of equipment(s), trials work.An Electrical Architect within the Weapon System Equipment Capability team will be responsible for: Designing the initial electrical architecture for emergent and early lifecycle projects; Maintaining the electrical definition and requirements at later stages of the lifecycle, including production Delivering the technical and certification documentation, including safety related certification and UKCA/CE declaration; Supporting the functional integration of the hardware within the wider sub system definition; Promoting the wider capability definition of electrical architects within MBDA. Providing certification and sign off expertise for electrical architecture in projects delivered internally and to external customers at all project lifecycle phases;Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-KF1

An exciting opportunity for an experienced Electrical Test Operator to join our Manufacturing Operations team in a fast-paced but friendly and inclusive Manufacturing environment. Salary: £42,558 Dynamic (hybrid) working: 5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking. Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more.The opportunity: This opportunity is for an Electrical Test Operator to join the Manufacturing team supporting test and certification of a variety of electrical hardware builds, ranging from small fixtures through to complex missile systems, during all phases of the product lifecycle. You will be providing operations support to ensure programme targets are met to agreed time, cost and quality requirements. Ensuring that completed hardware builds are tested in accordance with drawing requirements and specifications; Maintaining a safe working environment in-line with 5S policies Always aiming to deliver in line with all time, cost and quality requirements Ensuring assembly unit production costs are met Maintaining, to the highest level, workmanship standards and product quality Ensuring the completion of all manufacturing documentation Working closely with fellow Operators, Engineering and Quality to overcome any technical challenges and offer feedback for continuous improvement activitiesYou will be working with a large team of multi-disciplined operators in a fast-paced but friendly and inclusive Manufacturing environment. The team has a great mix of people, ranging from apprentices through to experienced skilled technicians, all striving to deliver technical excellence across a number of different missile systems in development and production. What we're looking for from you: Qualifications required (all of the below): Electrical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) Electrical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.) Electrical Engineering / Manufacturing Level 3 vocational qualification (NVQ) Practiced in reading and understanding assembly drawings and planning instructions Fully conversant with all Manufacturing equipment, tools and measuring instruments Uses their initiative and can work without close supervision Goes 'the extra mile' to get work finished to a high standard Flexibility and adaptabilityOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

An opportunity has arisen for an experienced Manufacturing Electronics Engineer to join our manufacturing team in Bolton. Fantastic opportunity to support across all stages of product assembly Salary: Circa £45,000 depending on experience Dynamic (hybrid) working: 5 days per week on-site due to workload classification Security Clearance: British Citizen Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: We are seeking an Electronics Engineer to service Electrical and Electronic Test Equipment, including Special to Type Test Equipment (STTE).The work is extremely varied, interesting and challenging. You will be joining a dynamic and focussed team, responsible for the support of the manufacturing function across all stages of product assembly integration and test. The team are self-motivated and work directly with support functions and engineers across MBDA to resolve routine and non-routine tasks arising within the business. These tasks include supporting routine calibrations, commissioning, drift analysis, fault finding and repair of test equipment. You will be working within an experienced team of Engineers supporting complex test platforms in the manufacture and test of complex missile systems. You will be trained to calibrate and support special to type factory test equipment using a range of technologies, DC to Microwave. Annual reviews assess and plan any future development opportunities and needs to widen your overall engineering knowledge. Teamwork and knowledge sharing is an essential part of the team ethos as is the understanding of workload and throughput achievements. What we're looking for from you: HNC/HND with relevant experience Experience and knowledge in the calibration of test equipment and maintenance of test systems to component level. Able to utilise instructions, handbooks, drawings or specifications to provide technical advice/guidance. Able to use this information to conduct appropriate measurements and repairs down to component level. Good understanding of calibration principles and processes. Able to mentor other or more junior staff when requested by line manager. Able to deal with multiple issues, tasks and priorities concurrently. Analytical and problem solving skills. Good communication skills with the ability to tailor communication to the relevant audience. A good understanding of SAP would be desirable. Experience of working on Environmental Chambers an advantage.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

The Principal Mechanical Engineer provides technical leadership for Mechanical, Environmental & Vibration test. Salary: Circa £50,000 depending on experience Dynamic (hybrid) working: 5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking. Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more.The opportunity: The Principal Mechanical Engineer is responsible for developing new test solutions and supporting existing ones, providing full test capabilities to operations. The role focusses on existing and new product requirements, developing and maintaining test capabilities, leading continuous improvement methodologies and providing key technical support to operations and engineering functions. Knowledge of Environmental, Vibration & Mechanical test, calibration controls and equipment capabilities is critical, as well as the ability to work in cross functional teams and reporting to external stakeholders. Key attributes include: Mechanical test experience (i.e. pressure decay, helium leak test, friction test) Experience in Environment & Vibration test - ideally Environmental Stress Screening (ESS) Vibration analysis and profile development (use of DataPhysics or similar control SW) Thermal profile development Knowledge of PSSR 2000 including written scheme of examination. Diagnosing and repairing faults on ESS and mechanical test equipment Writing test & calibration instructions for operational staff A working knowledge of thermal, vibration and mechanical test principles and test equipment Preparation of Test Equipment Defining Specifications contributing to the design, procurement and commissioning of fully bespoke mechanical & pneumatic test facilities.What we're looking for from you: Minimum HNC qualification in relevant field, HND or higher preferred. Proven experience setting up test systems - Mechanical & Environmental test Experience using investigation techniques & conducting route cause analysis Technical report writing experience essential SAP experience desirableOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. Salary:Up to £57,000 dependent on experience + bonus + benefits What we can offer you: Company bonus of up to £2,500 (based on company performance and will vary year to year) Pension of maximum total (employer and employee) contribution of up to 14% Paid overtime Up to 15 days flexi leave 25 days annual leave (plus holiday purchase) Possible relocation available Fantastic site facilities, including subsidised meals, free car parking and more Excellent career progression and development opportunitiesHybrid working pattern: Primarily office based (Bolton) with some opportunity for homeworking Want to be part of a successful team working to develop new and innovative seeker solutions to address complex customer requirements? Then keep reading .... The opportunity: An opportunity exists for a Electronic Engineer with broad based skills, including a strong background in RF engineering, to take a key role in the design support of seeker products being produced in our manufacturing facility based at Bolton. The Seeker Division designs and develops state of the art RF and Dual Mode (RF and IR) seekers for use in guided missile programmes. The role requires a high degree of enthusiasm and a determination to work autonomously to support the delivery of products to the right standard and within the required timescales. The role: Acting as a design team representative to interface with the design and manufacturing teams to transition a seeker from the development phase into series manufacture. Work with manufacturing on process and capability issues & support continuous improvement initiatives to maximise production yields. Support non-conformance management, dealing with design queries and advising on non-conformances where appropriate. Support manufacturing with internal and external suppliers. to aide the manufacturing team & ensure continuity of supply. Support obsolescence management by providing recommendations to the design team.What we're looking for from you: We are looking for an Electronic Engineer with the initiative and the determination to investigate and resolve production problems. A broad-based engineering background would be essential to the role and a detailed knowledge of RF assembly and test procedures would be advantageous. The successful applicant will be able to manage their own workload, interact well with both the design and manufacturing teams, work on project changes in a timely manner & maintain the production schedule. The team: The factory based Design Support Team assists with a variety of different seeker projects - no two working days will be the same! The Design Support Team interfaces with both the Stevenage design team & Bolton manufacturing teams, to help with highly technical problem solving. There are also strong relationships with external suppliers who provide sub-assemblies into the seeker build.Our Business: We respect new perspectives and experiences, and we value our collaborative ways of working. We are committed to growing and supporting diversity in our workforce and ensuring everyone has an equal opportunity to reach their potential. We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. We also welcome applicants who are looking for flexible working arrangements. Follow us on LinkedIn (MBDA), Twitter (@MBDAcareers), Instagram (lifeatMBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. Please Note: MBDA UK Limited requires all employees to achieve the required medical and national security clearance for their role. Further restrictions and/or limitations relating to nationality and/or rights to work may also apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. Due to the nature of our business, this particular vacancy requires the applicant as a minimum to be a British Citizen or a Dual UK national with British citizenship and capable of achieving the clearance levels mentioned above. #LI-SF1

This is a fantastic opportunity for an experienced Test Equipment Design Engineer to join our Production Design Support Team. You will play a leading role in a range of Engineering activities, providing Test Equipment design support to the Manufacturing organization and broadening your expertise in an international environment. An exciting career path awaits! Job Title: Test Equipment Design Engineer, Production Design Support Salary: Circa £48,000 depending on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: We have a phenomenal opportunity for an experienced Test Equipment Design Engineer to play a leading role in the support of production activities with Production Design Support (PDS) at our site in Bolton. You will act as an integral interface between our design teams and our manufacturing teams while working alongside other support engineers to provide knowledge and support. The role offers the candidate a true engineering challenge in their core discipline(s), whilst providing scope for personal growth and development in other areas. Working within Production Design Support (PDS) is a highly rewarding role as you not only see designs coming to life in the manufacturing environment but you can help to shape the design of the products and test equipment, delivering support to our customers. What we're looking for from you: Ideally degree qualified (or equivalent industry experience) with experience of designing product/systems and/or providing support to designs through the manufacturing phase of the product lifecycle. Excellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation. Experience of working within a multi-disciplinary team, with an awareness of the challenges and opportunities that this may bring. Someone with a passion for innovation and collaboration. Experienced engineer who will be prepared to work autonomously if needed, leading the delivery of your work assignments and actively engaging with stakeholders to ensure successful delivery of your outputs. Solid experience of managing discreet work packages preparing bids, controlling costs and delivering solutions. Investigative skills to be able to find Root Causes of design related issues and propose robust corrective actions. Full Product Lifecycle knowledge or experience Willingness to provide support to and mentor other Engineers and Engineering Technicians.Proven experience in the design of one or more of the following disciplines:- RF and Antenna Design Electrical Architecture Design for Safety and Integrity RF Test and measurement principle knowledgeOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

Bolton Are you passionate about executing and managing critical and complex supplier subcontracts? Do you have experience of providing work collaboratively with UK and/or international suppliers whilst protecting the commercial position? Salary: Circa £ 48,000 depending on experience Dynamic (hybrid) working: 2-3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: Working within Major Equipment Procurement (MEP), you will partner with our suppliers around the world and enable MBDA to provide world-leading defence capabilities for our Home Nations and their Allies. You will lead the preparation, negotiation, implementation and performance of subcontracts across the entire life cycle of missiles and missile systems. You will ensure that contracts are effectively managed to time, cost, and quality resulting in the delivery of high value and sophisticated sub-systems. You will need to provide commercial guidance to internal customers and manage risk and opportunity to safeguard the interests of MBDA. Key activities on a day-to-day basis can vary between individual roles, but expected activities you are likely to complete: Preparation and execution of subcontracts, either with existing partners or as a result of running tendering activities Oversee subcontract amendments to ensure they remain topical and in compliance with latest contracting standards and legislation Undertaking performance management activities to ensure that suppliers deliver in line with subcontract obligations Develop and nurture strong supplier relationships with suppliers within the UK, Europe and the rest of the world Identify and mitigate commercial and business risks relating to the suppliers which you are responsible for Obtain quotations and other critical intelligence from suppliers which enable MBDA to bid for new businessWhat we're looking for from you: MEP provides a collaborative, team-focused environment where multitasking is a key skill. This is a really key role, and we need people who can help us be successful by taking requirements and problem solving with tangible solutions. There will be ample opportunities for you to develop within the MEP team and across the wider procurement business. You will be required to travel to our suppliers in the UK, Europe and potentially internationally. You'll be keen to learn or bring experience in procurement subcontract management, e.g. negotiation, contract and terms and conditions Be able to problem solve daily and skilled at finding a resolution Keen to provide continuous support and co-operation to senior internal and external customers Continually improve opportunities, analyse situations and present possibilities, whilst balancing riskOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-LA1