Trabajos plant maintenance en London - Page 12Crear alertas

Mechanical Engineer | Foot-Mobile (Central London) Central London Portfolio – High-End Residential & Mixed-Use Estates (phone number removed) (url removed) The Opportunity A leading London-based facilities management provider, renowned for delivering first-class service across luxury, high-rise residential developments, is looking to appoint a Mechanical Engineer to join its established foot-mobile team across Central London. This is an excellent opportunity to work across a prestigious portfolio of multi-block estates, including residential towers, communal podiums and complex plant infrastructure. The role is heavily focused on compliance-led maintenance, structured PPM delivery in line with SFG20 standards, and ensuring the ongoing performance and reliability of critical building services. You’ll play a key role in maintaining and optimising mechanical systems, with a strong emphasis on fault finding, troubleshooting and asset performance, rather than purely installation work. Key Responsibilities Deliver planned and reactive mechanical maintenance across landlord and communal systems Carry out PPM tasks in line with SFG20 schedules and asset registers Diagnose faults across heating, cooling and domestic water systems, ensuring minimal disruption Undertake pipework installation, modifications and repairs (LTHW, CHW and domestic systems) Maintain key plant equipment including air dirt separators, strainers and valves Perform vessel servicing, including draining, flushing and recommissioning Carry out plate heat exchanger maintenance and flushing Respond to plant failures and restore system functionality efficiently Support compliance-driven remedial works identified through maintenance activities Accurately record all works via CAFM/mobile systems, ensuring full compliance and audit trails Liaise professionally with site teams, contractors and residents Adhere to all health & safety procedures, including permit-to-work and RAMS Participate in a 1 in 4 on-call rota (post-probation) What We’re Looking For Qualified Mechanical Engineer (City & Guilds, NVQ or apprenticeship) Strong background in compliance-led maintenance within commercial or residential environments Solid understanding of building services systems (heating, cooling and domestic water) Proven experience with pipework systems and mechanical plant Experience working within structured PPM environments (SFG20 desirable) Strong fault-finding and diagnostic capability Good understanding of statutory compliance (pressure systems, water hygiene, etc.) Ability to read and interpret mechanical drawings and schematics Comfortable working in a foot-mobile role across Central London Confident using digital reporting/CAFM systems Why Apply? Work across a high-end Central London portfolio Join a well-established and respected FM provider Exposure to complex, modern building services systems Stable, permanent role with clear structure and support Opportunity to develop within a professional, compliance-driven environment

Pay: £45,000.00-£50,000.00 per year Job Description: Air Conditioning Service Engineer Locations Mobile Sites & Heathrow Office Shift Pattern Monday – Friday | 40 hours per week Salary £40,000 – £50,000 per annum Job Introduction TF Recruitment is working in partnership with a reputable client to recruit a skilled and committed Air Conditioning Service Engineer into a permanent position within a technically demanding environment. This role offers long‑term stability, variety of work, and the opportunity to operate within essential public‑sector facilities, supporting critical services across London. Role Overview This is an excellent opportunity for an experienced Air Conditioning Service Engineer to utilise their technical expertise across reactive fault diagnostics, servicing, commissioning, and installation works. The role covers a mix of mobile and fixed sites and offers exposure to a wide range of HVAC, mechanical, electrical, and building services systems. You will play a key part in maintaining compliance, safety, and operational performance while working in a professional, well‑structured environment. Key Responsibilities • Carry out reactive fault finding and repairs on air conditioning and HVAC systems, • Complete commissioning and servicing of HVAC equipment, chillers, AHUs, DX systems, and associated plant, • Maintain and update F‑Gas registers across London Fire Brigade sites, • Compile technical reports and performance documentation in line with quality procedures, • Work closely with contract teams to ensure client and stakeholder satisfaction, • Produce technical and reject reports for failed components or plant, • Take full responsibility for health & safety, following method statements and risk assessments, • Support service, maintenance, and warranty works where required, • Assist with general maintenance across Mechanical, Electrical, and Building Fabric disciplines, • Identify lifecycle replacement requirements and report accordingly, • Complete all associated paperwork, worksheets, and compliance documentation accurately Operational & Administrative Duties • Accurately complete and submit weekly timesheets, • Submit weekly expenses with all supporting documentation, • Ensure customer paperwork is completed on site, including signatures, • Fully complete engineer worksheets highlighting additional works required, • Complete Minor Works Certificates and Electrical Installation Certificates as applicable Essential Skills & Experience F‑Gas qualified (fully qualified on all units) Strong experience with Air Handling Units, including DX systems L8 Awareness IPAF PASMA Proven background in field‑based service and fault‑finding Desirable (Not Essential) Working knowledge of Microsoft Office and Building Management Systems HVAC and Building Services engineering experience Emergency Lighting Fundamentals (Units 1 & 2) Generator load testing experience Additional plumbing or mechanical qualifications City & Guilds 2360 / 2330 Electrical Installation & Maintenance or equivalent 18th Edition IEE Wiring Regulations Benefits You’ll benefit from a comprehensive package designed to support your health, wellbeing, and work‑life balance, including: 24/7 Virtual GP access for you and your immediate family Mental health support and life‑event counselling Get Fit wellbeing programme Financial and legal support services Cycle‑to‑work scheme Access to an employee rewards platform offering discounts, cashback, and exclusive offers

Mobile Commercial Gas Engineer – £60,000+ | Mon–Fri | London & South East We are currently seeking an experienced Mobile Commercial Gas Engineer to join our growing team, covering London and the South East. This is an excellent opportunity for a skilled engineer looking for a stable Monday–Friday role, competitive salary, and the chance to work on a wide range of commercial and industrial boiler systems. The Role As a Mobile Commercial Gas Engineer, you will be responsible for maintaining, repairing, and installing commercial boiler systems across multiple sites. The role involves both planned preventative maintenance (PPM) and reactive breakdown work, ensuring systems operate safely and efficiently. Key Responsibilities Carry out planned preventative maintenance (PPM) on commercial and industrial boiler plant and heating systems. Respond to reactive breakdowns, diagnose faults accurately, and complete repairs efficiently. Perform detailed fault finding across electrical, mechanical, and gas/oil boiler components. Undertake boiler installations, commissioning, and decommissioning when required. Conduct combustion analysis to ensure optimal efficiency and compliance. Complete gas safety inspections and maintain all relevant certification records. Identify and repair issues with pumps, valves, plate heat exchangers, flue systems, and control panels. Provide clear technical reports detailing work completed, parts used, and recommendations. Deliver a professional service to clients, offering technical advice and updates when required. Manage van stock and inventory effectively. Participate in an out-of-hours call-out rota when required. Ensure full compliance with health & safety regulations including Gas Safe, OFTEC, LOLER, COSHH, and CDM. Maintain company vehicle, tools, and equipment to a high standard.Requirements Essential Qualifications & Experience Current Commercial Gas Safe certifications, including: COCN1 – Core Commercial Gas Safety ICPN1 – Installation of Commercial Pipework CIGA1 – Commercial Indirect Fired Heating Appliances CDGA1 – Commercial Direct Fired Heating Appliances TPCP1 / TPCP1A – Testing & Purging of Pipework CORT1 – (Desirable but not essential) NVQ Level 3 or equivalent in Heating & Ventilation, Gas Engineering, or similar. Minimum 5 years’ experience working on commercial or industrial boiler systems. Strong fault-finding and diagnostic skills across multiple boiler manufacturers. Full UK Driving Licence. Excellent understanding of health & safety regulations. Ability to read and interpret technical drawings and schematics.What’s on Offer Salary from £60,000+ depending on experience Monday to Friday working pattern Mobile role covering London & the South East Company vehicle, tools, and equipment provided Opportunity to join a professional and supportive engineering teamIf you're an experienced Commercial Gas Engineer looking for your next opportunity, apply now to join a well-established and growing company

Project Engineer - Food Manufacturing £60,000 + Bonus + Benefits North London, Finchley Profile: This is an excellent opportunity for a Mechanical Engineer/ Maintenance engineer looking to develop a career in project engineering within a fast-paced food manufacturing environment. Working alongside the Project Engineering Manager and Head of Engineering, you will gain hands-on experience delivering a range of engineering projects across site. Ideally, you will be degree qualified (or equivalent) in Engineering, or apprenticeship trained and currently working towards a degree (or keen to do so). You may already have some exposure to manufacturing, food, process, or packaging environments and perhaps run small projects previously. A strong interest in moving into project engineering, alongside excellent communication skills, is essential. This role would suit an engineer who is looking to transition into projects and is motivated to continue studying and developing their career further. The successful candidate will be commercially aware, proactive, and eager to learn, with the ability to engage with both internal teams and external stakeholders. Role: This is a development role supporting the delivery of engineering projects across site, including system and line upgrades. Responsibilities will include: - Supporting new line equipment installation - Assisting with commissioning activities - Supporting new unit development - Assisting in the management of Health & Safety requirements - Supporting plant, services, and building requirements - Assisting with CDM compliance - Updating URS documentation - Coordinating industrial systems and service installations Key responsibilities include: - Supporting the delivery of projects on time and within scope and budget - Assisting with resource planning - Coordinating internal teams and external suppliers - Supporting risk management activities - Assisting with quality control processes From initial site brief through to project completion, you will take a hands-on role, supporting all stages including concept development, specification, planning, testing, sourcing, and coordination of equipment and contractors. Company: My client is one of the UK's leading suppliers of freshly prepared food, currently investing heavily in new machinery and production lines. They offer a strong development pathway, with a clear strategy to promote from within, making this an ideal opportunity for an engineer looking to transition into project engineering

About The Role Right across infrastructure, theres a requirement to not only maintain, but also renew and reimagine. Whatever stage youre at in your career, with us youll have an opportunity to grow and develop. Delivering essential infrastructure services for life, while being safety first, and client and customer centric in a friendly, fun and respectful environment where you are encouraged to thrive. Where will you be working? We help our clients safeguard the water supply, improve environmental performance and manage demand for future generations. We enhance and extend asset life, ensuring compliance with water quality and environmental standards. Were problem solvers with over 140 years of combined experience in engineering and infrastructure. This role will be within our MEICA and capital maintenance team. Our Mechanical, Electrical, Instrumentation, Control & Automation (MEICA) experts offer a one-stop solution, including ongoing operation and maintenance services. Want to be a part of it? What will you be doing? You will be responsible for maintaining various water assets, including: CSO valves Penstocks Hydraulic Power Units (HPUs) Isolation gates Inspection of chambers and valve equipment Oil equipment inspection, including draining and replacing oil systems Inspection of fixed equipment (fixed ladders, safety bars, grills, etc.) Utilising tooling and measuring equipment, in accordance with engineering drawings and layouts Operating lifting equipment and following approved processes for plant equipment transportation Supporting reactive works during breakdowns What youll bring Do you have previous experience as a fitter? Are you trained or qualified as an apprentice, or to an equivalent NVQ Level 3 in Mechanical Engineering? Have you gained successful completion of ONC/HNC in Engineering, NVQ, or C&G Level 3 in Mechanical Engineering? Do you have excellent attention to detail? Are you someone who has a strong focus on safety and quality, with a collaborative teamwork approach? Do you hold a valid UK driving licence? Whats in it for you? We offer a range of benefits designed to support your life in and out of work, some of which include; Contributory pension scheme Online GP service, 24 hours a day, 365 days a year Employee assistance programme My Rewards portal, access to 1000s of retail discounts Life assurance Cycle to work, salary finance and give as you earn schemes Enhanced maternity, paternity leave and adoption leave Reward and recognition scheme In addition, this role offers; Company van/vehicle and fuel card for business use 25 days annual leave plus bank holidays Recommend a friend get rewarded for introducing people to us! About us We want to be an employer of choice and a great place to work, attracting diverse and talented people, who join us and make a difference. Were one of the Top 100 UK companies actively supporting and recruiting army veterans. Our ENABLE inclusion networks bring together people who have a shared passion, to help create an environment where everyone belongs. Our values help to shape our culture and how we work with one another. We recruit with these values in mind, to ensure your aspirations, and ways of working, align with ours. Were responsible and go further for our people, clients, communities and the planet Were open and seek new and better ways of exceeding expectations Were together and as one team; the whole is greater than the sum of the parts Were ambitious and embrace opportunity, to lead essential infrastructure services for life Whether youre a trainee, apprentice or graduate, or progressing through your career, our people benefit from industry recognised programmes, training and development. Its an exceptional time to be a part of M Group. Please note: Occasionally, job adverts might be closed before the stated closing date. Do apply as soon as possible to ensure your application is considered. For certain roles, successful candidates will be subject to 3rd party background checks as part of the hiring process. Some roles require drug and alcohol testing as part of induction and onboarding. #MGroupWINDREG TPBN1_UKTJ

CP32563 Mobile Plant Fitter - Midlands (Field-Based) | £45,000 + Benefits | Permanent What's on Offer Salary: £45,000 per annum 25 days holiday + bank holidays Birthday day off Strong benefits package Fully equipped support (including service vehicle where applicable) Long-term, stable opportunity within a busy, well-structured business Supportive team culture with strong operational backing I'm currently working with a well-established plant hire business who are looking to appoint an experienced Mobile Plant Fitter / Field Service Engineer / Mobile Plant Mechanic to cover the Midlands region, operating from their Tamworth depot. This is a field-based role, ideal for someone who has worked as a Plant Fitter, Mobile Plant Engineer, Field Service Technician, Heavy Plant Mechanic, Construction Plant Engineer, Telescopic Handler Technician, Diesel Mechanic, or Plant Maintenance Engineer. Most of your work will be carried out on customer sites, so this suits someone who prefers autonomy, variety, and getting away from a fixed workshop environment. What You'll Be Doing You'll be responsible for keeping a key fleet of telehandlers operational and customer-ready: On-site fault finding, diagnostics, and breakdown repairs Servicing and maintenance of telehandlers (JCB, Manitou, and similar equipment) Ensuring machines are safe, compliant, and returned to service quickly Working independently across multiple customer locations Managing your workload and priorities effectively Providing a professional, customer-facing service What I'm Looking For NVQ Level 2/3 in Plant Maintenance (or equivalent) Proven experience as a Mobile Plant Fitter / Field Service Engineer / Plant Mechanic Strong knowledge of diesel engines, hydraulics, and heavy plant systems Full UK driving licence (max 3 points) Ability to work independently and make decisions on-site Strong communication skills CSCS card is beneficial but not essential. The Opportunity This role is ideal for an experienced Field Service Engineer, Mobile Plant Fitter, Construction Plant Technician, or Heavy Plant Mechanic who wants independence, variety, and a properly organised operation behind them. If you're currently in a workshop role and looking to move into the field, or already mobile and want a better-run environment, this is a strong opportunity. INDHP If you would like to know more about this position, then please forward your CV to immediately. If you would like to discuss this position, please call 01329756416 and ask to speak to Chloe. Please note Alecto Recruitment are acting as an employment business in relation to this vacancy. TPBN1_UKTJ

Static Shift Engineer (Electrical Bias) – Canary Wharf We’re currently recruiting for an Electrical Bias Shift Engineer to join a professional landlord-side engineering team across a prestigious commercial building in Canary Wharf. The Role You’ll be part of a dedicated on-site engineering team responsible for maintaining landlord systems within a large commercial building. This role is ideal for someone who enjoys a hands-on, traditional engineering environment, with a strong focus on planned preventative maintenance (PPM) and fault finding rather than working on brand-new, warranty-covered equipment. Key Details Large commercial property environment (landlord side) Team of 8 engineers, split into 2 teams of 4 Shift pattern: 4 on / 4 off (7am–7pm) Always working in pairs for safety and efficiency Additional mobile team supporting tenant-related issues Responsibilities Carry out planned preventative maintenance PPM as tasked by building coordinator. Fault finding and remedial works across electrical and mechanical plant Ensure all systems operate safely and efficiently Respond to reactive maintenance tasks Work collaboratively within a structured engineering team Requirements Electrically qualified – NVQ Level 3, City & Guilds Level 1 & 2, or equivalent 18th Edition Wiring Regulations Experience within commercial building maintenance Strong fault-finding ability and practical mindset Reliable, team-focused, and proactive Package Salary: £49,026 with 3% shift allowance Overtime available 25 days holiday + bank with additional buy and sell schemes Private pension contribution Bupa healthcare scheme Full Uniform, PPE and Specialist Tools provided Yearly salary increases Yearly Bonus Schemes 20% discount on all food across Canary Wharf Support learning development for all engineers Enhance parental leave, sick pay and compassionate leave To apply, please send a copy of your most updated CV

Company Description BJF Group is a leading multi-discipline Main Contractor based across the UK, specialising in delivering high-quality construction projects across various sectors - priding ourselves of our reputation for excellence and attention to detail. Within our M&E division, the engineering team plays a crucial role in the day-to-day delivery of planned works across a diverse range of properties and systems within large Mechanical & Electrical contracts. Position As part of our continued growth, our Mechanical & Electrical (M&E) division are looking to appoint an experienced Plumber Pipefitter to use their working knowledge of mechanical systems to complete project works with responsibility for all aspects of the installation, maintenance, inspection, operation and repair of the plumbing and pipework systems typically within commercial, industrial and secure settings. Your role will include: Deliver high-quality installation of commercial plumbing and mechanical pipework systems across a diverse range of M&E projects. Carry out installation, testing, and commissioning of pipework systems within plant rooms, energy centres, boiler houses, and mechanical service areas. Install pipework and associated systems serving AHUs, chillers, boilers, heat pumps, HIUs, and HVAC equipment. Interpret and work from technical drawings, schematics, and specifications to ensure accurate and efficient installation. Install carbon steel, stainless steel, copper, and plastic pipe systems using appropriate jointing methods. Work strictly in accordance with approved method statements and safe systems of work. Complete and review point-of-work risk assessments prior to commencing installation activities. Ensure full compliance with Health & Safety, Environmental, and company IMS policies and procedures. Coordinate effectively with project managers, supervisors, and other trades to deliver projects on programme. Prepare bills of materials, raise material requisitions, and manage site materials to support installation works. Requirements Qualifications/Experience: 3-5 years’ experience domestic/commercial/industrial plumbing & pipework fitting and heating engineering NVQ Level 3 in Plumbing & Pipework G3 Unvented Competent Person Certificate WRAS -Water Industry Approved Plumbers' Scheme (WIAPS) CSCS Card Holder Full UK driving license Working Knowledge: Proven track record of commercial plumbing, pipework. and heating engineering Ability to read and clearly understand drawings and specifications Ability to work with a degree of autonomy and meet deadlines Understanding of Health & Safety and CDM regulations Understanding of current standards and regulations Interpretation of drawings, schedules and specifications Testing, inspection and problem resolution Basic report writing Support project teams in the preparation of schedules and quotations Collaboration with clients, sub-contractors and other trades Other information: Competitive Salary Annual Leave Entitlement: 33 days per annum (inclusive of bank holidays) Group Pension Scheme: Provided by Royal London to save for your future. Free Eyesight test: Specsavers Company Funded Health Cash Plan: helping you spread the cost of essential healthcare like, trips to the dentist. Remote GP Access: speedy access to a GP by telephone or online plus electronic prescriptions 24/7 EAP Service: free advice, counselling and support for you and your family whenever you need it. Discounted Gym Membership at more than 3,000 gyms across the UK. Free Eyesight test: Specsavers Better BJF Initiative: wellbeing and mental health champions readily available at work. Employee Referral Scheme: recommend a personal connection to us and claim a cash reward for their successful hire At BJF we look for people who seek: A career that will challenge and motivate A flexible, supportive, and caring environment The opportunity to progress, make key decisions and own their future A high level of variety in day-to-day work life TEAMS Values by BJF Group Trusted Open, honest and transparent Excellent The best in everything we do Agile At the forefront of change Motivated Driven to continuously improve together Safe Supportive of everyone’s wellbeing . We are an equal opportunities employer, and we welcome applications from all suitably qualified persons regardless of their sex; religious or similar philosophical beliefs; political opinion; race; age; sexual orientation; or, whether they are married or are in a civil partnership; or, whether they are disabled; or whether they have undergone, are undergoing or intend to undergo gender reassignment. Awarded Silver Armed Forces Covenant Employer Recognition Scheme (2022) Awarded ‘Management Team of the Year’ at the Surrey Kent Sussex (SKS(Apply online only) Awards (2022) Finalists of the Southeast Construction Awards in the Best Construction Project and Best Construction Contractor categories. (2021) Candidates would be subject to security checks and any offer would be subject to successfully securing these clearances within the probationary period, including both Criminal Record Bureau Check (CRB) and Disclosure & Barring Service Check (DBS)

Shift Leader – FM Service Provider – Kensington, West London – £60K Are you an experienced shift leader looking for a new and exciting challenge? Would you like the chance to work in one of the newest and most impressive venues in West London? If so, read on… A leading FM service provider is seeking a Shift Leader for one of their most prestigious contracts based in the Kensington area of West London. Applicants must have a proven track record in a commercial, critical, or banking environment and hold a recognised electrical or mechanical qualification. This role operates on a day and night shift pattern, so flexibility is essential. Candidates must have a solid understanding of all critical building services including UPS systems, generators, air conditioning, refrigeration, server rooms, lighting, and power. Key Duties Ensure Planned Preventative Maintenance (PPM) & Reactive Maintenance is carried out on all client assets using the maintenance system. Manage the shift engineering team. Carry out hands-on maintenance work when required. Ensure plant faults are quickly resolved to maintain continuous operation. Perform regular quality checks on work activities, documentation, and housekeeping. Ensure suitable spares are available to support ongoing maintenance. Maintain accurate maintenance records and job sheets. Prepare, review, and use Method Statements and Risk Assessments for all tasks to ensure safe working practices.Requirements Fully qualified electrically or mechanically to a recognised standard. Proven experience in building maintenance within a critical site (commercial, blue-chip, or banking). Strong communication skills. Multi-skilled knowledge – mechanical/electrical including UPS, generators, and power distribution. Good leadership and management skills.Please send your CV to katie at CBW Staffing Solutions for more information

Mechanical Maintenance Engineer – Healthcare – Enfield – £42,000 – 4 on 4 off (Days Only) An excellent opportunity has arisen for an experienced Mechanical Maintenance Engineer to join a Facilities Management team on a healthcare contract in Enfield. This is a days-only shift role (4 on 4 off), offering a great work-life balance while working within a critical environment where reliability and compliance are essential. The Role As a Mechanical Engineer, you will be responsible for delivering both planned and reactive maintenance across a busy healthcare site, ensuring all mechanical systems are operating safely and efficiently. Key Responsibilities Carry out planned preventative maintenance (PPM) and reactive repairs Maintain and repair mechanical building services systems, including: HVAC and ventilation systems Pumps, valves, and pipework Pressurisation units and water systems Heating and hot water systems Support works on medical gas systems (where applicable) Ensure compliance with health & safety and statutory regulations Respond promptly to breakdowns and emergencies Accurately complete job reports using CAFM systems Liaise with contractors and support site operations as required Requirements Recognised mechanical qualification (NVQ/City & Guilds Level 2 or 3) Proven experience within building services / facilities maintenance Strong fault-finding and problem-solving skills Experience working in healthcare or critical environments (desirable) Knowledge of HVAC and mechanical plant systems Ability to work effectively within a shift team Package Salary: £42,000 per annum Shift pattern: 4 on 4 off (days only) Pension scheme Holiday allowance Ongoing training and development Location Enfield (single healthcare site) This is a great opportunity for a Mechanical Engineer looking for a stable shift role within a critical healthcare environment, offering long-term security and a strong team culture. Apply now or get in touch for more information

Job Title: Technical Contract Manager Purpose of the Role The Technical Contract Manager is responsible for leading, managing, and developing all technical and operational aspects of the contract for a key site in Central London. The role ensures all financial, compliance and performance targets are achieved or exceeded. This position requires strong electrical or mechanical knowledge, experience working within critical environments, and close liaison with the client, Helpdesk Manager and internal senior managers. The operation must be proactive, technically strong, and consistently focused on delivering exceptional customer satisfaction. Key Responsibilities - Overall responsibility for site Health & Safety and the engineering team's adherence to safe working practices. - Work closely with Contract Support to ensure service levels are consistently maintained. - Provide strong technical leadership and ensure the planned development of the contract, meeting and exceeding all contractual obligations. - Support the Helpdesk to achieve high levels of customer satisfaction. - Maintain excellent client relationships and attend monthly client meetings as required. - Ensure the contract maintains safe working conditions and high compliance standards. - Communicate and implement all business policies and processes across the contract. - Provide Weekly Flash Reports to clients and internal management. - Work collaboratively with Senior Management to drive operational improvements and team performance. - Ensure full statutory and code compliance across the site. - Oversee PPM planning for all technical systems and ensure works follow manufacturer guidelines and HVCA SFG20. - Own the return and accuracy of PPM and work‑related documentation. - Manage risk, including operational, technical, and compliance risks. - Lead engineering teams, ensuring competency, development, and succession planning. - Full responsibility for the contract P&L including WIP, debt, forecasting and budget control. - Manage any disciplinary or conflict issues appropriately. - Ensure accurate and up‑to‑date asset registers are maintained. - Oversee efficient procurement of materials, equipment, and specialist services. - Produce dilapidation reports and monthly operational reports. - Ensure additional services, variations, and projects are captured and progressed. - Proactively identify and quote for additional works. - Provide technical support to engineers, helpdesk and clients when required. - Investigate major operational incidents and submit detailed reports. - Ensure engineers are equipped with the correct tools and conduct regular tool and equipment inspections. - Maintain calibration of specialist testing equipment. - Ensure effective contract review, audit and quality control processes are in place. - Ensure engineering staff present a professional image and wear correct uniform/PPE. - Carry out monthly site reviews and at least two audits per year per contract. - Conduct engineer performance appraisals. - Maintain an effective escalation procedure. - Ensure all callouts are responded to promptly in conjunction with the Helpdesk. - Deliver monthly toolbox talks and promote a strong safety culture. - Prepare quotations by providing labour breakdowns and supplier information. - Attend operational meetings as required. - Maintain regular communication with the engineering team. - Carry out monthly audits of PPM and reactive works, reporting findings to the manager. - Ensure accurate use and maintenance of site logbooks. - Maintain high levels of customer service and represent BGIS values at all times. - Ensure completion of all third‑party contractor works. - Recommend improvements to enhance service provision and operational efficiency. Accountabilities - Reports to the Operations Manager / Account Manager. - Responsible for management of engineering staff and subcontractors. - Full responsibility for operational delivery and contract performance; no direct budget ownership but full P&L accountability. Essential Requirements - Strong technical background - HNC or above in Electrical or Mechanical Engineering. - Recognised technical qualification with an electrical or mechanical bias. - ILM Level 3 or equivalent leadership qualification. - Extensive experience working within critical environments (e.g. data centres, financial services, healthcare, critical infrastructure or large estates). - Proven experience delivering hard FM services on a complex site. - Demonstrable experience leading engineering teams. - Strong technical knowledge of building services plant and systems including HVAC, electrical distribution, BMS, mechanical plant, etc. - Excellent communication, client engagement and relationship management skills. - Fully competent in managing PPM, reactive maintenance, statutory compliance, and safe systems of work. Desirable Requirements - Experience managing contracts in Central London. - Experience building engineering teams or restructuring technical operations. - Multi‑skilled technical background. - Experience with CAFM, asset management and reporting tools. At BGIS we believe that diversity and inclusion is a key business driver, such that we never lose sight of its importance as it is woven into the fabric of our organisation. We are committed to maintaining a barrier-free recruitment process by providing equal employment opportunities through recruiting and retention of individuals of all backgrounds. We recognise that promoting diversity is an essential component of our continuing pursuit for organisational success! #BGISUK

CBRE Global Workplace Solutions is a leading global provider of integrated facilities and corporate real estate management. We are recruiting a Critical Services Shift Technician to join the team in London. About the Role: As a CBRE Critical Services Technician, you will resolve and complete day-to-day work orders to meet customer satisfaction targets and ensure completion in the time frame required. This job is part of the Critical and Technical Services job function. They are responsible for technical maintenance services in critical client environments. Please Note: this role is a continental shift pattern (a mix of days/nights). Role Title may vary from advert. Role Responsibilities: Qualify and act as an appointed Authorized Person (AP) within 6 months from onboarding. Maintain an up-to-date log of work completed and outstanding items through the in-house system. Ensure that all contractors and staff comply with all company, client safety, and security requirements. Participate in the critical services training program. Ensure effective communication with the client and management team is maintained. Operate as a team with other technicians by sharing expertise and experience to help resolve operational problems. Provide holiday, training & sickness cover for other members of the shift team. Track and complete Critical Services Planned Preventative Maintenance and provide condition assessments of plant and equipment. Log and action all out-of-line situations with incident reports. Use existing procedures to solve straightforward problems while having a limited opportunity to exercise discretion. Impact through clearly defined duties, methods, and tasks are described in detail. Deliver own output by following defined procedures and processes under close supervision and guidance. Role Requirements: Skills: Essential- Good technical & faultfinding skills Educated to a minimum of City & Guilds in Electrical (or HNC) Excellent administrative skills Computer literate Highly conversant in Microsoft Office suite Strong interpersonal and communication skills Procedure writing Desirable- Apprenticeship (or equivalent programme in Electrical / Mechanical Installation). Report writing Knowledge: Essential- Excellent knowledge of the operation of Mechanical & Electrical Services Ability to interrogate and operate BMS systems Knowledge of business-critical services i.e., UPS, Generators and Comms Rooms etc Desirable- 18th Edition IEE regs HV Trained Aptitude: Essential- Must be able to work under own initiative. High level of personal integrity Takes ownership of issues and ensures completion. Able to organize and manage own workload. Good communication skills both verbal and written to all seniority levels. Understanding of customer needs and standards. Presentable and smart always Self motivated with drive to exceptional service Incumbents must have a high level of energy, confident and stable in manner. Organised, able to prioritise and deliver within high pressure, business critical environments. Committed to the delivery of excellent customer service. Able to work under pressure whilst remaining calm and focused. Able to make sound decisions based on fact and experience. Working with team members Circumstances: Essential- Provide out of hours accessibility as part of escalation procedure. Must be flexible regarding working hours Core Competencies: Essential- Exceptional customer focus Good understanding of customer requirements Able to build enduring relationships. High level of responsiveness Good verbal and written communication skills Analytical Desirable- Personal drive for results - works to exceed goals, expectations, and standards Why CBRE When you join CBRE, you become part of the global leader in commercial real estate services and investment that helps businesses and people thrive. We are dynamic problem solvers and forward-thinking professionals who create significant impact. Our collaborative culture is built on our shared values - respect, integrity, service and excellence - and we value the diverse perspectives, backgrounds and skillsets of our people. At CBRE, you have the opportunity to chart your own course and realize your potential. We welcome all applicants. Applicant AI Use Disclosure We value human interaction to understand each candidate's unique experience, skills and aspirations. We do not use artificial intelligence (AI) tools to make hiring decisions, and we ask that candidates disclose any use of AI in the application and interview process

Office based in central London Expected Working Hours: · Fridays 10 hours 7am to 5pm, 30 minutes break unpaid OR 2 hours 6am to 8am Monday to Friday Some flexibility required for seasonal peaks or reactive issues ROLE PURPOSE To maintain and enhance the health, presentation, and longevity of indoor plants across the client's London office, ensuring a consistently high‑quality environment aligned with workplace standards and brand expectations. KEY RESPONSIBILITIES Plant Care & Maintenance · Water, feed, prune, clean, dust, and maintain all indoor plants and planters · Monitor plant health; identify and address early signs of pests, disease, nutrient issues, or stress · Conduct soil checks, repotting, top‑dressing, and plant rotation as required Plant Replacement & Sourcing · Recommend replacements where required and propose suitable species based on light, airflow, temperature, and usage patterns · Liaise with Facilities/Workplace teams regarding new plants, upgrades, layout changes, or project work Quality & Compliance · Ensure plants meet agreed presentation standards at all times · Follow safe working practices (manual handling, spill controls, tool safety, chemical safety) · Complete any required site induction, security/access procedures, and compliance training Reporting & Communication · Provide regular updates on plant health, inventory changes, and issues observed · Escalate environmental problems (e.g., lighting failures, temperature/humidity issues) impacting plant health · Submit periodic reports (e.g., monthly/quarterly), if required by the client or FM team Coordination & Planning · Plan efficient maintenance routes and schedules across floors/areas · Coordinate with Facilities for access, plant replacements, supplier matters, and small projects · Support office moves/refurbishments involving planting as needed REQUIRED SKILLS & EXPERIENCE · Experience in horticulture, indoor plant care, or similar maintenance role · Strong knowledge of indoor tropical plants, succulents, and large potted specimens · Familiarity with pest control, feeding schedules, and general plant diagnostics · Competent with hand tools; knowledge of irrigation systems advantageous · Excellent attention to detail and pride in presentation · Ability to work independently and manage time effectively in a client‑facing environment · Professional communication suitable for a corporate office setting · Physically fit and comfortable lifting/carrying and working around office environments DESIRABLE QUALIFICATIONS · RHS Level 2 or equivalent horticultural qualification · Experience in commercial/office horticulture or interior landscape maintenance role · Awareness of sustainable plant care practices (e.g., peat‑free media, natural pest control) ON‑SITE COMMITMENTS · Occasional coordination for plant replacements, supplier matters, or small project support Blue Arrow is proud to be a Disability Confident Employer and is committed to helping find great work opportunities for great people

The Role: To work with the Site FM & other team members, in implementing the maintenance services. These include the planned preventative maintenance (PPM) programme and reactive maintenance in accordance with the building operating manuals, in compliance with the contract service levels and current regulations. Carry of day to day monitoring of the water systems within the designated buildings. Assist technical staff in carrying out maintenance and repair activities Undertake non-technical engineering maintenance tests Keep plant and work areas clean and tidy Carry out weekly / monthly tasks on water systems to ensure compliance as instructed Undertake failsafe & servicing of TMV's Carry out clean & disinfection of cold water storage tanks and associated plant Knowledge skills & experience Demonstrate working experience of HSG274, Approved Code of Practice L8, Health Care Memorandum (HTM) Legionella Awareness Water monitoring and Tank Inspection Must come from a strong legionella, water treatment, water hygiene, chemical background Plumbing qualifications up to NVQ Level 2 (Desirable) Risk Assessor qualifications (Desirable) Person Ability to work on own initiative and as part of a team. On some occasions, able to work at height after training Must be flexible regarding work times Punctual on all occasions

Plant Displays Installation Staff - Shenley, Watford - WD7 Area - X2 Roles Installation staff are required by one of the UK's leading Horticulture and Grounds maintenance specialists Your duties will predominantly be installing plant displays for our clients (hanging baskets, Drilling brackets into buildings and other plant displays and irrigation systems) as well as the odd interior display. These are permanent roles available after a successful probation period of 13 to 15 weeks and our client is looking for workers who want long perm or permanent work The hours are 6am to 2.30pm - Being site work you will need to be flexible A drivers licence is essential - you will need to meet your colleague daily in Shenley Experience is strongly preffered - ideally suited for labourers and people with trade experience, ladder work is required Very good company to work for The pay rate is up to £15.12 per hour Starts ASAP Please send a CV or call to apply

Location: NHS Trust, London Contract: 3‑month temp to perm Pay: £250 a day Role Type: Development role for an experienced senior engineer looking to progress We are supporting an NHS Trust in London is seeking a Estates Officer – Electrical (Band 7) to join the Estates & Facilities team on a 3‑month temp‑to‑perm basis. This is a pivotal senior technical position designed as a development opportunity for a highly skilled electrical engineer ready to take the next step into strategic estates leadership. You will take a lead role in the safe, compliant and efficient management of electrical engineering services across a large and complex healthcare estate. The post is ideal for an engineer with strong technical capability who wants to grow into a broader estates leadership role with long‑term progression. Key Responsibilities * Lead maintenance, installation, testing, verification, validation and commissioning of electrical plant, systems and equipment. * Ensure electrical assets follow robust maintenance regimes, including electrical testing records, PAT testing, generator tests and electrical SOP oversight. * Lead on electrical incident management, including power failures affecting critical clinical services. * Support the Head of Estates in providing a responsive, professional estates service. * Work collaboratively with fellow Estates Officers and multidisciplinary teams on operational and project-related tasks. * Supervise contractors, ensure safe access to plant and service areas, and guarantee all works meet Trust policies and HTM/ACOP standards. * Participate in the Estates on‑call rota, offering technical support out of hours. * Implement and monitor H&S legislation, HTMs, ACOPs, Permit to Work systems, RAMS and Trust safety policies. * Conduct and update risk assessments, maintain compliance documentation, and ensure safe systems of work. * Provide specialist technical input into capital projects, reviewing technical submissions and ensuring electrical safety and resilience in new builds and refurbishments. If you are an experienced electrical engineer ready for a senior challenge and keen to develop into a broader leadership role we encourage you to apply

Job Title: Multi-Skilled Electrical Engineer – Corporate Building Location: London Bridge Hours: 40 Hours per week (Monday to Friday) Salary: Up to £48K + Overtime & Benefits The Opportunity A respected Facilities Management provider is looking to appoint a Multi-Skilled Electrical Engineer to support operations at a large, high-profile corporate building. This is a modern, well-maintained site where engineering standards are taken seriously. The successful candidate will join a professional on-site team responsible for keeping building systems running smoothly, safely, and without disruption to daily business operations. This role offers a strong mix of electrical and mechanical exposure, making it ideal for an engineer who enjoys variety and wants to broaden their skill set in a stable, corporate environment. What Makes This Role Stand Out Work within a clean, professional corporate environment A well-structured engineering team with clear roles and support A balanced workload of electrical and mechanical tasks Opportunity to gain experience across a wide range of building systems A stable, long-term contract with a reputable FM providerKey Responsibilities Carry out planned preventive maintenance (PPM) and reactive maintenance across electrical and associated mechanical systems Maintain and fault-find on power distribution, lighting, emergency lighting, and control systems Support mechanical plant including HVAC systems, pumps, motors, and basic plumbing tasks Respond to faults quickly, ensuring minimal disruption to building occupants Monitor plant performance and take a proactive approach to maintenance Ensure all work complies with health & safety regulations and statutory requirements Maintain accurate records, including logbooks and compliance documentation Liaise with subcontractors and other service teams where requiredThe Ideal Candidate The organisation is looking for a reliable and adaptable engineer who is comfortable working across disciplines. The right candidate will take ownership of their work and contribute positively to the wider team. Essential: Recognised Electrical or Mechanical qualification (NVQ / C&G Level 3 or equivalent) 18th Edition Wiring Regulations Experience working within commercial or corporate environments Basic mechanical knowledge (HVAC, pumps, general building services) Strong fault-finding and problem-solving ability Good communication skills and a professional approachDesirable: Experience in a multi-skilled FM role Familiarity with BMS systems Previous experience in large corporate or commercial buildingsWhat’s On Offer Competitive salary with overtime opportunities Stable, long-term position within a respected FM provider Exposure to a varied and technically interesting site Opportunities for ongoing training and development Supportive team environment with clear structureWhy Apply? This is a solid opportunity for a multi-skilled engineer who wants a role that offers both stability and variety. The site is well run, the expectations are clear, and the work is consistent without being repetitive. Engineers who take pride in maintaining high standards and want to be part of a professional corporate environment will find this role a strong fit

Job Title: Multi-Skilled Engineer (Electrical Bias) Location: The Gherkin, London Salary: £55,000 + plus Shift Allowance Shift Pattern: 4 on, 4 off (Days only, 7:00am – 7:00pm) Overview We are currently recruiting for two Multi-Skilled Engineers (Electrical Bias) to join a high-performing team at The Gherkin, one of London’s most iconic commercial buildings. This is a dynamic, high-profile site spanning 41 floors, offering a fast-paced and varied working environment. This role is ideal for an engineer who enjoys diversity in their day-to-day work and is looking to further develop their skills across a wide range of building services systems. Key Responsibilities • Carry out electrical and multi-skilled maintenance tasks across the site, • Respond to reactive maintenance issues in a timely and effective manner, • Complete planned preventative maintenance (PPM) schedules, • Work on a wide range of plant equipment including generators, chillers, cooling towers, and sprinkler systems, • Support site projects and continuous improvement initiatives, • Maintain strong working relationships with clients and stakeholders, ensuring a high level of customer service, • Ensure all work is completed in line with health and safety standards and site procedures The Team You will be part of a well-established and supportive on-site team consisting of: • 4 Engineers, • Fabric Technician, • Water Technician, • Operations Manager, • Account Director Qualifications & Experience • 17th or 18th Edition Wiring Regulations, • HVAP / LVAP status (current or lapsed considered), • City & Guilds or NVQ Level 3 in Electrical Installation (or equivalent), • Proven experience within commercial building services or facilities maintenance, • Strong fault-finding and diagnostic skills, • Ability to work both independently and as part of a team What’s on Offer • Competitive salary of £55,000+ plus shift allowance, • Day shifts only with a 4 on / 4 off pattern, offering excellent work-life balance, • Opportunity to work in a prestigious, landmark building, • Exposure to a wide range of plant and building systems, • Ongoing training and career development opportunities, • Supportive and collaborative team environment Please apply below or call Alix on (phone number removed) for more information

Shift Technician / Facilities Maintenance Engineer (Building Services) Site-Based 12-Hour Rotating Shifts (Days & Nights) Full-Time | Permanent Competitive Salary + Shift Allowance + Benefits + Training & Development Overview An excellent opportunity for a Shift Technician / Facilities Maintenance Engineer / Building Services Engineer to join a high-performing team within a modern, technology-driven workplace environment. This role is ideal for engineers with experience in facilities management, building services, or critical environments, who enjoy fault finding, planned maintenance, and maintaining high-performance building systems. Working within a collaborative shift team, you will play a key role in ensuring operational reliability, system performance, and service excellence across a flagship site. The Role As a Shift Technician, you will be responsible for delivering both Planned Preventative Maintenance (PPM) and reactive maintenance across a wide range of electrical and mechanical (M&E) building services systems. You will gain hands-on experience with: • Electrical and mechanical plant systems - HVAC and building services systems - Building Management Systems (BMS) - Fault finding and diagnostic activities - Live workplace / critical environment operations This is a shift-based, safety-critical role focused on maintaining uptime, efficiency, and compliance within a professional workplace environment. Key Responsibilities Maintenance & Engineering Operations • Deliver PPM across all building systems - Carry out reactive maintenance and fault finding - Maintain electrical and mechanical plant reliability - Monitor and operate BMS systems - Diagnose faults and implement effective repairs - Ensure work is completed in line with KPIs and SLAs Compliance & Safety • Follow all Health & Safety procedures and Safe Systems of Work (SSOW) - Ensure compliance with statutory and regulatory requirements - Support incident response and emergency procedures - Promote a strong safety-first culture and risk awareness Team Collaboration • Work closely with engineering teams and workplace stakeholders - Maintain clear and effective shift handovers and communication - Support training, mentoring, and knowledge sharing - Deliver a professional, customer-focused service Continuous Improvement • Identify opportunities to improve system reliability and performance - Support initiatives that enhance efficiency, resilience, and sustainability - Maintain accurate records using CAFM / digital maintenance systems Skills & Experience Essential • City & Guilds / NVQ Level 3 in Electrical or Mechanical Engineering - Experience in facilities maintenance, building services, or similar environments - Strong understanding of M&E systems (electrical, mechanical, HVAC) - Experience using BMS or digital monitoring systems - Proven fault-finding and problem-solving ability - Ability to work effectively in a shift-based team environment Desirable • HV/LV Authorised Person (AP15) (training available) - 18th Edition Wiring Regulations (BS 7671) or mechanical equivalent - HNC / HND in Engineering - Confined Space / Pressure Systems AP - IOSH or Health & Safety qualification What’s on Offer • Competitive salary + shift allowance + benefits package - Clear career progression into Senior Engineer / AP roles - Ongoing training and professional development - Exposure to modern, technology-enabled building systems - Opportunity to gain Authorised Person (AP) certifications - Stable role within a forward-thinking organisation - Supportive, collaborative engineering culture Working Pattern • 12-hour rotating shift pattern (days & nights) - Site-based role in a modern workplace environment - Flexibility for overtime and additional support when required

Field Service Engineer Heavy Plant Location: West midlands - Start your work day from home. Salary: £43,000 - 45,000 + Overtime (OTE £45,000£55,000+) Working Hours: 08:00 16:30 (Overtime Paid Before & After) Benefits: Company Van | Fuel Card | 25 Days Holiday + Bank Holidays | Pension | Spot Bonuses | Full OEM Training | Career Development The Opportunity Join a globally recognised heavy equipment manufacturer supporting critical construction and quarry operations across the UK. This is a home-based Field Service Engineer role, covering the West Midlands region, where youll take ownership of your day, travelling directly from home to customer sites. Youll be working on a range of high-value plant machinery, playing a key role in keeping essential equipment operational. With a team of just 12 engineers nationwide, this is a close-knit, specialist environment where your contribution is visible and valued. The Role Carrying out diagnostics, servicing, and repairs on heavy plant equipment Working across electrical, hydraulic, and mechanical systems Managing your own workload typically 1 to 3 jobs per day depending on complexity Attending customer sites including quarries, construction, and infrastructure projects Occasional overnight stays as required Ensuring high standards of safety and customer service at all times What Were Looking For NVQ Level 2 or 3 in Engineering (or equivalent) Valid CSCS Card Proven exierience in fault finding and maintenance Strong knowledge of: Hydraulics Electrical systems Mechanical systems Full UK Driving Licence Comfortable working independently in a field-based role Desirable (Not Essential) Quarry Passport HS2 Site Card Whats on Offer £43,000 - £45,000 with strong overtime potential Company van, fuel card, laptop, tablet, and phone provided 25 days holiday plus bank holidays Pension scheme Spot bonuses and recognition incentives Ongoing technical training and OEM development All specialist tools provide Why Join? Home-based role with structured hours and paid overtime Work on high-spec, industry-leading equipment Join a small, highly skilled engineering team Genuine opportunity for long-term development and progression About Us This opportunity is being advertised by Pertemps Specialist Division Engineering, supporting clients across the UK with high-quality engineering talent. TPBN1_UKTJ

Berry Recruitment are looking for a grounds operative to work as part of their grounds maintenance team for our client based in Enfield. a licence is required as you will be required to drive a 3.5 tonne vehicle as and when required. This is an active role as you are getting in and out of the vehicle. Undertaking all aspects of grounds maintenance including shrub cutting, hedge cutting/pruning, strimming, weeding, litter picking etc. Operating small tools and plant, such as petrol hedgecutters and blowers Driving company vehicles (up to 3.5T) Ensuring daily work schedules are followed, and to a consistent high standard. Completing training in the appropriate equipment and safe methods of work Completing appropriate safety checks on all vehicles and equipment, carrying out maintenance, and reporting defects as required. Liaising with members of the public, other team members, managers and sub-contractors in a professional and courteous manner. Must have a valid catagory B licence Working hours are Monday to Friday 42 hours per week. This is a 7.15am start Immediate start. if you are interested please apply now or contact Bilal Baree in the Hendon branch on (phone number removed). Please note that no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and ability to perform the duties of the job

Based in the area of Radstock, the working hours for this Maintenance Engineer role is only 4 days a week between Monday and Friday DAYS ONLY. Saturday and Sunday are not worked, as well as one day of your choice during the week. The hours of work total 39 hours per week plus premium overtime of x1.5. This Maintenance Engineer role offers a salary of £47000 plus company pension matched to 10% and generous holiday allowance, and bonus. The company is a leading manufacturing business with a huge network of manufacturing plants across the country and a fantastic reputation as leaders in their sector. What's in it for you as Maintenance Engineer Monday - Friday (4 days only - 39 hours) £47000 Basic Salary plus bonus Certified top-tier training opportunities and career development Hours of work are 6am to 4:00pm (39 hours per week) Company pension matched up to 10% by the company Industry leading benefits program, share option schemes, employee benefits program etc Duties of Maintenance Engineer Assisting with maintenance plans, driving PPMs and performing reactive maintenance Undertaking improvement projects as part of the maintenance team Responsible for identifying and eliminating recurring plant issues through engineering improvements Hands on maintenance and engineering plant development I would like to speak with those with the following: Engineering qualifications: Full Advanced Apprenticeship in Electrical Engineering or City & Guilds level 3, NVQ Level 3 AND ONC, BTEC Level 3, or equivalent qualification in Electrical Engineering Strong Health and Safety awareness Previous experience as a Maintenance Engineer, Electrical Maintenance Engineer, Lead Engineer etc Previous experience of undertaking maintenance within a manufacturing environment Previous experience of the development and application of PPM activities and knowledge of reactive maintenance techniques If this is something of interest to you and you are wishing to develop you career with an industry leading manufacturer then Please apply now! TPBN1_UKTJ

Mechanical Maintenance Engineer (service and repair) £52 - £55k per annum & overtime, vehicle/ fuel card & package My client is seeking a skilled and reliable Heating Engineer to join our dedicated team at Hammersmith, St Mary's & Charing Cross Hospitals. The ideal engineer will have experience in maintaining, repairing, and installing Low Temperature Hot Water, Medium Temperature Hot Water & Steam Systems. Qualifications & Experience: Proven experience as a heating engineer, preferably in a healthcare & commercial setting. Commercial plant room experience. Strong knowledge of various heating/ hot water systems and controls. Relevant certifications (NVQ Level 2/3, or equivalent). Excellent problem-solving skills and attention to detail. Ability to work independently and as part of a team. Various Tasks to be carried out; Monthly PPM and reactive visits relating to plant; Heating & Hot water Calorifiers, Plate Heat Exchangers. Removing bundles from calorifiers to allow inspection/ de-scaling. Upgrading system components; gauges, safety valves etc. Replacement of key system components on various system; Pumps, motorised valves, modulators, slam shuts, plate packs. Re-pipe works when system fails. Re-pipe works during project works. Various system upgrades due to the age of the systems. Key Responsibilities: Conduct regular inspections and servicing of all heating systems to ensure optimal performance. Respond quickly to heating-related emergencies or system failures. Maintain accurate records of maintenance and repairs via job reporting & good communication with their supervisor/ manager. Work closely with other staff when upgrades are taking place within Hospital wards. Feed all site/ system recommendations back to their line manager. Open to be working at multiple sites in 1 day. Jobs can be very Ad-hoc on these premises due to the age of the building, emergencies can come in at any time. Ability to work with Steel, Galvanised steel, stainless steel, copper & ABS, utilising crimped systems. If you meet the criteria then please contact Russ Cleverley in CONFIDENCE

Pump Service Engineer - Field Based £37,000 - £42,000 Basic + Overtime & Callouts (Up to £60,000 OTE) Permanent, Full Time About the Company Our client is a leading specialist hire provider of pumping, heating and cooling solutions across the UK and Ireland. With a strong national depot network and a 24/7 service capability, they support customers with both planned projects and emergency response solutions across a wide range of industries including construction, utilities, facilities management and industrial sectors. The Role Based from the depot, you will work regionally carrying out service, maintenance, installation and breakdown support on a variety of pump systems. This is a field-based role where no two days are the same, supporting customers on both planned works and reactive callouts. Key Responsibilities Service, maintain and repair diesel and electric pump units, submersible pumps and associated equipment Install and commission pumping systems on customer sites Diagnose and fault-find mechanical and electrical issues Attend breakdown callouts as part of a 1 in 3 standby rota Complete service reports and relevant documentation accurately Ensure company vehicle, tools and stock are maintained Deliver high levels of customer service on siteWhat We're Looking For Experience as a Pump Engineer, Service Engineer or Field Service Engineer Strong mechanical knowledge is essential Candidates from other industries will be considered, such as Generator Engineers, Plant Engineers or similar, provided they have solid mechanical experience Ideally experience working on diesel engines and associated systems Strong fault-finding and diagnostic skills Ability to work independently in a field-based role Full UK driving licence (essential) Flexible attitude towards standby and overtimeWhat's on Offer £37,000 - £42,000 basic salary Realistic earnings up to £60,000 with overtime, callouts and standby payments Company vehicle and fuel card Tools and equipment provided Pension scheme Ongoing training and development Stable, long-term career opportunity with a market-leading organisationIf you're looking for a secure role with strong earning potential and plenty of overtime available, apply today with your CV. Pump Engineer - Dartford Pump Engineer - Dartford Pump Engineer - Dartford Calibre Search promote equality in the workplace and we welcome applications from all suitably skilled or qualified candidates regardless of their sex, race, disability, religion/beliefs, sexual orientation or age. We act as both an employment agency and employment business

Plant Engineer/ Fitter Flannery Plant Hire is a leading provider of plant hire and specialist attachments to the construction industry across the UK and Ireland. With a comprehensive fleet of innovative machinery, we pride ourselves on delivering exceptional customer service and meeting our clients' project requirements. Summary of Role We are seeking a skilled and experienced Mobile Plant Fitters to join our team. The successful candidate will be responsible for the maintenance, repair, and servicing of a variety of construction equipment, ensuring that our fleet remains in optimal working condition. This role involves working both independently and collaboratively with our team of professionals. Duties & Responsibilities • Maintenance and fitting duties on a wide range of Plant items such as hydraulic excavators, dumpers, telehandlers and dozers., • Perform preventive maintenance to extend the lifespan of equipment., • Adhere to all health and safety requirements and guidelines and conduct safety inspections on equipment and report any hazards or concerns., • Carrying out any mechanical repairs and maintenance duties assigned or requested by the Service Manager, • Follow work practices and instructions as directed by the Service Manager, • Maintain accurate records of maintenance and repair activities. Essential Criteria: • 2 years post qualification experience working as a Plant Fitter, • Experience and competency of fault-finding, maintenance and repair of heavy-duty construction plant, • Ability to work independently and collaboratively with a team. What we offer: • Competitive salary dependent on experience, • A positive and collaborative work environment, and opportunities for professional growth and development At Flannery Plant Hire, we value diversity and are an equal opportunity employer. We encourage applications from all qualified individuals regardless of race, colour, religion, gender, sexual orientation, age, marital status, or disability

BMS Engineer - Static Site Alecto Recruitment is working with our client who are a small but established and reputable specialist within the Building management systems (BMS) sector. They have an excellent opportunity within their team working on a key static site in London which will cover a Hospital. This position offers a diverse range of responsibilities as a BMS Engineer and offers the chance to join a superb team and great business. Salary: £55,000 - £60,000 £5,000 Car Allowance 25 Days Holiday + Bank Holidays Pension Company Bonus Private Healthcare Death in service Investment into on-going training and development The Role: Working as a BMS Engineer this position will include the service and maintenance of Trend BMS Systems The position will also be involved in on-going system upgrades and small works and project works Providing PPM works to sites Requirements: We are seeking an experienced building management systems (BMS) engineer You will be experienced working on systems such as Trend, Schneider, Tridium etc Have strong experience in service, maintenance, fault finding, repairs of BMS Systems Ideally be certified or qualified with BCIA, but this is not essential Experienced working within HVAC Plant and knowledge of HVAC Plant Experienced completing small works or BMS upgrades This is a great position and opportunity that joins a brilliant team and a business who will continue to offer on-going training and opportunities for development INDBMS

Mechanical Field Service Engineer – The Opportunity Are you a mechanically biased engineer looking for a field-based role with autonomy, variety, and strong earning potential? This is an opportunity to join a long-established UK supplier of garage equipment, supporting a busy customer base across London and the M25 region. You’ll work on a wide range of mechanical systems, diagnosing faults, carrying out repairs, and keeping essential workshop equipment operational. If you enjoy hands-on engineering, problem-solving, and being out on-site rather than stuck in one place, this role offers real long-term progression and stability. The Role – Mechanical Field Service Engineer Working from home, you’ll attend customer sites across the region, focusing primarily on the mechanical service and repair of garage equipment. Key responsibilities include: • Service, maintenance, and repair of tyre changers, wheel balancers, and vehicle lifts • Mechanical fault finding, diagnosis, and repair on customer sites • Working on hydraulic, pneumatic, and mechanical systems • Carrying out planned maintenance and reactive breakdown work • Installation and commissioning of new equipment • Ensuring all work is completed safely and efficiently • Completing service reports via tablet and liaising with the service team What We’re Looking For • Strong mechanical engineering background (essential) • Experience working on hydraulic, pneumatic, or lifting equipment • Previous field service, maintenance, or workshop engineering experience • Confident fault-finder with a practical, hands-on approach • Any experience with garage equipment, plant, lifting gear, or similar is highly advantageous • Basic electrical knowledge (desirable, not essential) • Strong work ethic and ability to work independently • Full UK driving licence Salary, Overtime & Benefits • Starting salary from £42,500 (DOE) • Overtime available to boost earnings significantly • Company van, fuel card, tools, tablet, and phone • Door-to-door style working environment (field-based autonomy) • Full product training and ongoing development • Stable, long-term role with a growing UK business Why This Role? This role is ideal for a mechanically minded engineer who wants: • A field-based position with independence • A varied workload across different customer sites • The chance to build specialist equipment knowledge • A clear route to long-term career development Apply Now – Mechanical Field Service Engineer If you’re a mechanically biased engineer looking for a new challenge in a field service environment, apply today and take the next step in your career

FM33268 Electrical Generation Engineer - CHP Up to £50,000 (DOE) South of England Alecto Recruitment is working with a leading power generation and energy company who are seeking an Electrical Generation Engineer to support electrical maintenance, commissioning, and system optimisation across sites in the South of England. Key Responsibilities & Tasks * Carry out electrical maintenance, fault finding, and repair on generation assets and control systems. * Support commissioning, testing, and integration of new plant and facilities into operations. * Diagnose control system faults, including PLC logic and signal issues, and implement solutions. * Inspect, maintain, and operate LV/HV electrical equipment (subject to competency). * Upgrade and replace control systems and electrical components where required. * Support and develop Operations staff through training, guidance, and supervision. * Ensure compliance with company procedures, NICEIC standards, and H&S legislation. * Manage electrical projects, including scoping works and supporting project delivery. * Maintain accurate documentation, reports, and commissioning records. * Participate in call-out rota and provide technical support across sites. Skills & Requirements * Strong experience in electrical maintenance, control systems, and commissioning. * Experience with CHP, gas engines, and/or solar systems. * Knowledge of generator control systems (e.g. CAT, MAN, MTU, etc). * Experience with electrical systems (12V DC - 415V AC, 3-phase). * Proven fault finding and PLC diagnostic skills. * 18th Edition and testing/inspection qualifications (2391 desirable). * HV AP/SAP (desirable). * Gas Safe (or willingness to obtain). INDW To apply for this role please send your CV to (url removed) or call (phone number removed) ext 220 to discuss. Equally if this role would not be of interest to you but may be suitable friend or colleague, we can offer paid referral fees for successful placements

I am currently recruiting for a large landscaping company who are in need of a Gardener in Brentford, This role is a temp to perm position and comes with a van + fuel card Job Responsibilities: Maintain and care for plants, flowers, shrubs, and trees in residential and commercial landscapes. Mow lawns, trim hedges, and carry out general grounds maintenance. Water plants and monitor for pests, diseases, and any plant health issues. Plant, prune, and transplant flowers, shrubs, and trees as needed. Design and implement planting schemes and garden layouts. Maintain tools and equipment to ensure they are in good working order. Maintain garden structures, such as fences, gates, and outdoor furniture. Provide general landscaping advice and services to clients. Ensure all work is carried out to a high standard of safety and quality.Qualifications: Previous gardening experience Full UK Driving licence Please apply and i will be in touch. RG Setsquare is acting as an Employment Business in relation to this vacancy

Company Profile CBRE's Global Workplace Solutions (GWS) division delivers end-to-end facilities management, engineering services, project management, and workplace support. Our teams combine technical expertise with a commitment to service excellence, innovation, and compliance. Through our engineering talent, digital tools, and focus on ESG and sustainability, CBRE helps clients reduce risk, drive performance, and enhance the workplace experience for their people. Job Title: Multi-Skilled Technician CBRE Global Workplace Solutions is a leading global provider of integrated facilities and corporate real estate management. We are recruiting a Multi-Skilled Technician to join the team located in London. Our Multi-Skilled Engineers are key members of the on-site Facilities Management team, providing technical support to ensure our clients' buildings are safe, compliant, and operating effectively. With an electrical bias, you will take the lead on electrical maintenance tasks while also supporting mechanical and general building services activities. Role Summary: As a CBRE Multi-Skilled Engineer you will utilise your advanced skills to perform complex preventive maintenance and corrective repair of buildings, industrial systems, vehicles, equipment and grounds. Working under limited supervision, monitors building system operations and performance. Utilising several trade skills such as carpentry, plumbing, electrical, painting, roofing, heating and cooling. Carry out planned and reactive maintenance to M&E plant in line with statutory requirements and best industry standards. Complies with all applicable codes, regulations, governmental agency and Company directives related to building operations and work safety. Be an ambassador of the CBRE values and behaviours. Ensure a professional image of CBRE is presented to clients and visitors and ensure excellence in customer service is delivered and always promoted. Oversees and inspects the work performed by outside contractors. Contracted work includes landscaping, snow removal, remodelling, HVAC, plumbers, and cleaning. Performs assigned repairs, emergency, and preventive maintenance. Completes maintenance and repair records as required. Responds quickly to emergency situations, summoning additional assistance as needed. Full JD can be provided upon application. Experience Required: Experience working in a Facilities Management/Maintenance Engineering role. Experience with Reactive and PPM (Planned Maintenance) A Degree/Qualification in either a Electrical or Mechanical discipline. Must demonstrate a strong sense of customer focus and commitment to continuous improvement

Fire Door Authorised Person / Supervisor London and Surrounding areas, Candidates living inside London and Home Counties accepted £50000k + Vehicle 24 days holiday Great Benefits Are you a Level 3 Carpenter with experience of Fire Doors within commercial buildings and looking for a new mobile role across the London area. This national Property Management company are recruiting due to a recent contract win. As Mobile Fire Door Authorised Person you will cover sites in London and around the M25, we are open to candidates living within the City or in the home counties Role Purpose: A vacancy has arisen for a practical individual to work as a Mobile Fire Door AP. The Mobile Fire Door AP will also need to be self-motivating. They will be responsible for carrying out reactive, PPM, remedial and installation works across the south of England in commercial premises and will also be required to liaise and coordinate works with our approved contractors. A good understanding of Fire Door Services, being well presented at all times and competent to provide technical advice when required to do so. Main Duties and Responsibilities: To carry out reactive maintenance repairs across various contracts. To assess and order parts and equipment necessary for individual tasks. To work to recognised industry standards at all times. To participate in flexible working hours and out-of-hours emergency cover as required by the contract. To undertake training as required to perform the duties of the role, including health and safety courses and further trade development, to maintain current knowledge and professional qualifications (Continued Professional Development). To undertake BM Trada training (supplied by us) to fulfil the role of an AP To quality assure inspection documentation, sign off remedial works carried out by other operatives and sign off installation works Build quotes off the back of the inspection reports Must be able to read and understand fire strategy plans and fire risk assessments Be able to work remotely from a laptop to fulfil AP duties Be able to provide support and guidance to other technicians in a supervisory capacity To work with the lead contract support and CEC to ensure works are completed on time and quotes submitted in a quick and efficient manner Ensure engineering standards are maintained in order to maximise efficient operation and reliability of plant To ensure company QA and site procedures are adhered to in all aspects To ensure that the Clients Health and Safety procedures are followed at all times To inspect the condition of services and proactively deal with call outs/repairs as required and/or requested by management Keep and maintain all company issued tools in a safe and working condition To undertake any other duties as directed by Managers within the remit of the role Provide detailed and accurate reports for any remedial works required whilst attending site Updating of on-site log books for compliance purposes Complete on site Method Statements and Risk Assessments as necessary This job description sets out the main duties of the post at the date it was completed. Such duties may vary from time to time without changing the general character of the post or the level of responsibility entailed Essential Qualifications & Experience: Trade Background & Qualifications (recognised qualification or apprenticeship) Level 3 City & Guilds in carpentry and joinery or equivalent qualifications Extensive Knowledge in building fabric services Extensive Knowledge of Health & Safety Regulations. For further information on the role and the company please APPLY NOW or get in touch with Gary Cornes for a confidential conversation

We are recruiting for an experienced Mobile Commercial Gas Engineer to join a leading facilities management provider working on a long-term public sector contract. This is a mobile field-based role covering South London, responsible for delivering planned maintenance and reactive repairs across a high-volume of sites. You will be working on a critical public sector contract supporting multiple sites, each with commercial kitchens, dormitories, and associated building services infrastructure. Key Responsibilities • Service, maintain, and repair commercial gas systems, • Fault-find and diagnose breakdowns across gas plant and heating systems, • Work on boilers, water heaters, pipework, gas air heaters, and radiant tube heaters, • Deliver planned preventative maintenance (PPM) and reactive works, • Carry out minor installation and remedial works, • Produce technical reports, job sheets, and compliance documentation, • Identify and quote for remedial works and lifecycle replacements, • Ensure all work complies with Gas Safe regulations, RAMS, and H&S standards, • Liaise with contract teams and client representatives Candidate Requirements Essential • Commercial Gas qualifications (Gas Safe registered), • Strong background in gas servicing, maintenance, and fault-finding, • Experience in building services or FM environments, • Full UK driving licence Highly Desirable • Experience working on public sector or critical infrastructure contracts, • Multi-skilled background (mechanical / electrical awareness), • Experience working with high-volume PPM/reactive workloads, • Strong reporting and client-facing communication skills Package & Benefits • 25 days holiday, • Company Van provided, • OOH call-out rota with enhanced pay (£100 minimum / 4 hours + uplifts), • Death in service benefit, • Sick pay after probation, • Long-term stable contract, • Parking available at all sites

Exciting Opportunity Alert! Join Rendall & Rittner as a Facilities Manager Are you looking for a rewarding challenge? Rendall & Rittner, an acclaimed Residential Leasehold Property Management company, is on the lookout for a Facilities Manager. This is an incredible career opportunity with a fantastic package. Position: Facilities Manager Location: Fitzroy Place, London, W1T 3BP Working Hours: Monday Friday 0900 - 1730 Salary: £55,000 - £60,000 (depending on experience) Contract: A permanent position that offers stability and room for growth. Why Rendall & Rittner: Award-Winning: Join an established and celebrated company known for delivering first-class property management services. Career Growth: At Rendall & Rittner, we invest in your professional development with fully funded training programs. Perks Galore: Enjoy exclusive savings on entertainment, travel, dining, shopping, health, and fitness. Competitive Compensation: Get rewarded with a competitive salary and discretionary bonuses. Time Off: Enjoy 25 days of holiday plus national holidays. Earn More: Optional overtime available across the Rendall & Rittner portfolio through our in-house TSS temp team. Professional Attire: A team uniform is provided to ensure a polished and consistent appearance. * Team Spirit: Be part of a collaborative work environment, where your team and relationships matter. Pension Plan: Secure your future with the Rendall & Rittner Pension scheme. Extra Support: Access Employee Assistance Programs (EAP) to help with family, health, financial, and work-related matters. Development Details: This role is based at Fitzroy Place, a prestigious residential development in Fitzrovia comprising 289 apartments. The development features a beautifully landscaped central courtyard, commercial office units, and a restored Grade II listed chapel. Ideally situated, it is within easy walking distance of Oxford Circus and Great Portland Street tube stations. Key Responsibilities and Requirements: As a Facilities Manager at Rendall & Rittner, you will: Have a strong technical services background and in-depth knowledge of M&E plant management, statutory compliance, client reporting, and the oversight of hard and soft service operations. Responsible for the operational oversight of the facilities department, this includes working collaboratively with the client and their Facilities Manager. This includes attending client meetings and reporting. Lead your on-site team and contractors to ensure high standards are consistently met, providing direction and support where required. You will line manage approximately 11 staff including a maintenance operative, cleaning operatives and estate operatives. Be responsible for all people management aspects within your team, including recruitment, performance management, appraisals, training and development. Manager contractor / service provider performance to ensure quality, value for money, and timely delivery of services. Have experience managing a range of on-site major works projects including full lifecycle delivery. Manage Planned Preventative Maintenance (PPM) schedules, ensuring any remedial works are identified and actioned promptly. Be highly IT literate, with experience using Building Management Systems (BMS) and other relevant systems. Manage and coordinate reactive maintenance and create maintenance project schedules. Carry out regular M&E inspections, including plant rooms, tank rooms, and associated infrastructure, ensuring accurate record keeping and compliance. Maintain and update Health & Safety documentation on Quooda. Ideally hold a NEBOSH qualification or equivalent Health & Safety / Facilities certification. How to Apply: Ready for this incredible opportunity? Explore Rendall & Rittner on LinkedIn for more insights, or visit our website for a full list of current openings. "Ref #LI-SK1" Please note that candidates must be eligible to work in the UK without restrictions, with documented evidence of eligibility required. Some benefits may become available after a qualifying period. *Some developments vary. Join Rendall & Rittner and take your career to the next level. Don't miss out on this exciting chance to progress your career and make a significant impact! TPBN1_UKCT

Gas Engineering Supervisor - JLL Workplace Management, London Position Overview Gas Engineering Supervisor responsible for leading a team of gas engineers and technicians across JLL's London commercial property portfolio. This role combines hands-on technical expertise with team management, ensuring safe and compliant gas system operations while delivering exceptional service to clients. Key Responsibilities • Supervise and coordinate a team of Gas engineers and other technicians across multiple commercial sites in London • Conduct complex gas system diagnostics, repairs, and installations on commercial heating and hot water systems, • Ensure all gas work complies with Gas Safety Regulations and relevant industry standards, • Carry out gas safety inspections, testing, and certification across assigned property portfolio Upkeep of Gas compliant Sharepoint including warning notice tracker, Technician gas training and calibration of team equipment. Carry out Gas and other audits on the team and any investigations. 100% check of all Gas paperwork and certificates. Attend monthly Gas forum meetings • Mentor junior engineers and provide technical guidance on complex gas engineering issues Attend monthly Gas forum meetings • Liaise with clients, building managers, and contractors to coordinate gas maintenance activities, • Respond to emergency gas situations and coordinate rapid resolution teams, • Monitor team performance and conduct regular safety briefings and training sessions Essential Requirements • Gas Safe registered engineer with domestic and commercial gas qualifications (CCN1, CPA1, CENWAT, COCN1, CODNCO1, ICPN1, CORT1, CDGA1, CIGA1 and TPCP1A) • Minimum 5 years' experience in commercial gas engineering., • Full UK driving license essential, • Strong knowledge of commercial gas systems, boilers, and heating controls, • Experience with large-scale commercial heating systems and plant room operations, • Excellent leadership and team management skills, • Strong understanding of Health & Safety regulations and risk assessment procedures, • Ability to read technical drawings and system schematics, • Strong communication skills for client interaction and team coordination, • Experience working within facilities management or similar commercial environment preferred Compensation and Benefits • Competitive salary reflecting supervisory responsibilities and experience • Company vehicle, laptop, tablet, phone and parking expense card provided., • Comprehensive benefits package including pension scheme, • Healthcare options, • Professional development opportunities and training support, • Career progression within JLL's global facilities management platform

Senior Horticulturist - High-End Private Gardens Salary: From £36,500 per annum (depending on experience) Location: Primarily North and West London Job Type: Full-time, Permanent Hours: Monday to Friday, 7:45 am - 4:15 pm (45-minute break) About the Role We are looking for an experienced Senior Horticulturist to lead our garden maintenance team across some of London's most beautifully designed private gardens, courtyards, and roof terraces. This role is perfect for someone with excellent plant knowledge, meticulous attention to detail, and the confidence to supervise 1-2 junior team members while maintaining the highest standards of garden care. You will work on prestigious, design-led gardens, playing a key role in delivering exceptional client service and consistently outstanding results. Key Responsibilities Deliver high-quality garden maintenance across premium private gardens Supervise and support junior horticulturists on site Diagnose plant health issues and implement appropriate treatments Operate tools and machinery safely and professionally Provide excellent client-facing service Maintain gardens to an exceptional standard throughout the seasons The Ideal Candidate Minimum of 3 years' experience maintaining high-end private gardens Strong horticultural knowledge and seasonal plant awareness Full UK driving licence and confident driving in London Professional, reliable, punctual, and detail-oriented Passionate about horticulture and maintaining high standards of workmanship What We Offer Competitive salary from £36,500 DOE Company vehicle Company pension scheme Uniform and equipment provided 28 days paid holiday (including bank holidays) Ongoing training and development Supportive, experienced team and outstanding gardens to work in About Us We are a well-established garden design, build, and maintenance company operating across London. We specialise in long-term private gardens and take pride in our reputation for thoughtful horticulture, professionalism, and excellent client relationships. If you are an experienced horticulturist who values quality, consistency, and being part of a reliable, friendly team, we would love to hear from you. Application Questions Do you have at least 3 years' experience in high-end garden maintenance? Are you confident with plant identification and horticultural practices? Can you commit to a 7:45am start, Monday to Friday? Are you confident driving a company van in London? Do you enjoy maintaining gardens to a consistently high standard? If you answered yes, we would be delighted to hear from you

Powered by Water, Driven by Purpose SES Water has a rich history of serving communities in the South East of England. Water plays an important role in our lives, which is why we're committed to supplying our customers with access to 160 million litres of safe, reliable, clean water every day. We're proud to be part of Pennon Group, a leader in the UK water sector, working towards a greener future. Our goals? As well as lowering our carbon footprint, we're working with partners to plant 300,000 trees, restore peatlands and supporting farmers and landowners to improve water quality and wildlife. Whether you're starting out or seeking a new challenge, our scale and ambition create opportunities for you to shape your own career. Ready to make a splash? Join our team today. We're looking for a Water Process Operative to help operate and monitor our water treatment works, pumping stations and service reservoirs across a defined operational area. You'll work as part of a close-knit team on a seven-day shift pattern, including standby, overtime and occasional night work. This is a varied role with a blend of indoor and outdoor activities - no two days are the same. £28,000 - £34,000 base salary, plus shift allowance, standby and overtime Total earnings potential: circa £45,000 What you'll be doing: Your responsibilities will include: Routine and emergency operation of water treatment processes including abstraction, filtration and disinfection Monitoring automated process systems via SCADA to ensure safe and efficient operation Taking water samples and carrying out analysis to meet internal and external compliance standards Managing water supply levels to meet customer demand across your operational area Diagnosing basic process plant faults, taking remedial action and escalating where required Ensuring compliance with all internal procedures and completing required documentation Liaising closely with colleagues and departments, particularly Water Quality , to resolve issues and optimise site performance Maintaining accurate records to meet regulatory and audit requirements Supporting M&E and Systems teams with planned and reactive maintenance activities Carrying out cleaning and housekeeping duties to maintain high site standards What we are looking for: To be successful as a Water Process Operative, you'll have: Experience in a similar process-driven or operational environment (water industry experience preferred) Experience working effectively as part of a team A strong focus on health & safety, compliance and process discipline A full UK driving licence Desirable: Experience within water, utilities or a regulated industry Mechanical, electrical or process knowledge Relevant technical qualifications (e.g. NVQ, BTEC or similar) What's in it for you? We're committed to supporting your development and wellbeing, offering a comprehensive benefits package: Financial wellbeing Employer pension contribution of up to 10% Life assurance Company bonus scheme Salary Finance - financial education, savings and loan options On-site garage with service discount Free on-site or local area parking Personal wellbeing 25 days annual leave, increasing to 27 days with length of service Healthcare cashback scheme and Surgical Choices Aqualibrium - on-site Mental Health First Aiders and free annual health checks Confidential crisis support, counselling and legal advice One paid volunteering day per year Closing Date: 30th April 2026 We may close this vacancy early if we receive a high volume of applications. We encourage you to apply as soon as possible. Please note that the successful candidate will be subject to a mandatory DBS check as part of the onboarding process. Be yourself, we like it that way. Together, we will build a culture of belonging, where inclusion is instinctive. Diversity is our strength and a reflection of our communities. We care, we value everyone, we celebrate uniqueness. Our core values, which are essential to our success, are: Be Rock Solid • Build trust and be trusted. Be the one we all look to and can depend on. Be You • We want you to bring your best everyday. Be yourself and make your mark in your individual way. Be the Future • Embrace change. Drive Progress. Own the challenge. TPBN1_UKTJ

A Central London based consultancy has an immediate requirement for an intermediate engineer to join their design team. Your responsibilities would include: Supporting the Senior Engineers, Associates, and Directors in undertaking electrical design and consultancy work, producing electrical design drawings, calculations (using Amtech, Hevacomp, IES, Relux, and Dialux software, etc), reports, specifications and schedules, systems design Liaising with other design team members internal and external, represent the business at meetings where appropriate. Fulfilling the technical responsibilities of an Electrical Engineer including but not limited to: Carrying out surveys of existing facilities and preparation of survey reports Assisting with early-stage design works, load estimates and assessment of plant area spatial allowances Provision of design calculations Assisting in the development of design solutions to comply with all recognised standards and Building Regulations, including Part F/ Part L / Section 6 requirements, etc, Assisting in the production of reports as required, including relevant supporting documentation required for BREEAM accreditation Supporting project risk assessments to ensure safe installation and operation and in compliance with CDM legislation. Production of CAD drawings and provision of all support to produce satisfactory detail drawings as required for tender, construction, or other purposes Assisting in the production of project specifications and schedules, adapting standard specification information where possible Attending and contributing to design team and project meetings Assisting in undertaking site supervision duties as necessary to ensure works are installed in accordance with contract documentation and good engineering practice Assisting in witnessing the testing, proving, and commissioning procedures of final installations as required, etc. Contributing to ensure the application and maintenance of all Integrated Management System procedures Carrying out all personal management duties including weekly recording of man-hour commitments to individual projects

JR301: Heat Pump & Ventilation Engineer Location: London & Home Counties Salary: £38,000 – £55,000 + company van + overtime + training Overview: First Military Recruitment is working in partnership with our reputable client who is seeking an Air Source Heat Pump & MVHR Service / Breakdown Engineer to join their team. This is a fantastic opportunity for an experienced engineer to work on both domestic and commercial systems across a varied portfolio including social housing, private, and commercial properties. The role offers excellent long-term stability, ongoing training, and clear progression opportunities. Duties and Responsibilities: Service and fault-find domestic and commercial air source heat pump (ASHP) systems Diagnose electrical, hydraulic, and refrigerant-related faults Check system flow rates, temperatures, and overall performance Work on associated equipment including buffer vessels, low loss headers, pump sets, and plate heat exchangers Service, inspect, and maintain MVHR units and ventilation systems Replace filters and check fans, controls, and condensate drainage Investigate airflow and system performance issues Complete service, maintenance, and breakdown reports accurately Follow RAMS and safe working procedures at all times Deliver high levels of customer service, particularly in occupied properties Liaise with internal teams regarding repair recommendations and required works Skills and Qualifications: Essential: NVQ Level 3 in Plumbing & Heating (or equivalent) F-Gas Category 1 G3 Unvented Hot Water qualification Heat pump training (manufacturer or accredited) Strong electrical fault-finding skills Experience with wet heating systems Full UK driving licence Desirable: MCS experience BPEC or City & Guilds Heat Pump qualifications MVHR manufacturer training (e.g. Nuaire, Vent-Axia, Zehnder) Commercial plant room experience Experience with BMS fault interrogation

Plant Operative Severn Beach - Bristol Permanent | Full-time 6am-4pm Monday-Friday About the Role Our client is currently recruiting a Plant Operative / Plant Operator to join their site operations team. This is a hands-on role focused on the recovery of ferrous and non‑ferrous metals through the safe and efficient operation of static plant and associated equipment. Reporting to the Site Manager / Assistant Site Manager, you will play an important part in maintaining plant performance, supporting health and safety compliance, and contributing to continuous improvement across site operations. This role is ideal for candidates with experience in industrial processing, waste recycling, aggregates, quarrying, or heavy plant environments. Key Responsibilities Health, Safety, Environment & Quality Promote and demonstrate high standards of Health, Safety, Welfare, Environmental and Quality compliance Comply with all site rules, management systems, permits and planning permissions Understand and fulfil responsibilities under HASWA (Health & Safety at Work Act) Report all accidents, near misses, safety concerns, environmental incidents or damage Support internal and external audits and help close out actions where required Participate in site safety briefings, toolbox talks and H&S meetings Maintain a clean, safe and organised work area, ensuring PPE is worn, maintained and stored correctly Plant Operation & Metal Recovery Operate and monitor static plant and metal recovery systems Support the efficient recovery of ferrous and non‑ferrous metals Carry out plant patrols, picking station duties and control room operations Communicate with loading shovel drivers to maintain a consistent flow of materials Monitor plant performance and product quality throughout operations Identify and report any issues affecting plant efficiency or metal recovery rates Maintenance & Housekeeping Maintain high standards of site housekeeping Carry out routine cleaning and basic plant maintenance Report defects or breakdowns immediately Complete planned preventative maintenance (PPM) checks accurately and on time Highlight problem areas and contribute practical improvement suggestions Training & Development Attend all required company and site-based training Participate in toolbox talks (TBTs) and performance discussions Take an active role in ongoing skills development and site improvement initiatives Key Behaviours & Attributes Strong commitment to health and safety Proactive, reliable and results‑focused Flexible approach with the ability to prioritise workload Team‑oriented with clear communication skills Professional when dealing with colleagues, contractors and visitors Willing to challenge unsafe behaviours and suggest improvements Key Relationships Internal: Site Management, Operatives, Production, Commercial and Head Office teams External: Customers, Clients, Regulatory Bodies (including HSE and Environment Agency), auditors, laboratories and training providers Decision‑Making Authority Responsibility for day‑to‑day site operational duties within the scope of the role Escalation of operational or safety concerns to line management as required Should you require any support or assistance, please contact your local Gi Group office. Gi Group Holdings Recruitment Limited are proud founding members of Menopause in business, corperate members for Neurodiversity in business, Disability Confident committed members, Gold status for the Armed Forces Covenant, Bronze trail blazers for Racial Equality matters and Age Freindly Employer pledge members. Gi Group Holdings Recruitment Limited group of companies includes Gi Recruitment Limited, Draefern Limited, Gi Group Recruitment Ltd, INTOO (UK) Limited, Marks Sattin (UK) Limited, TACK TMI UK Limited, Grafton Professional Staffing Limited, Encore Personnel Services, Gi Group Ireland Limited and Kelly Services (UK) Ltd. Gi Group Ireland Limited are acting as an Employment Agency in relation to this role. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Gi Group Privacy Statement. To view a copy and to help you understand how we collect, use and process your personal data please visit the Privacy page on our Gi Group website

Mobile Multi Skilled Engineer – London Join our team at CBRE Global Workplace Solutions We're seeking a highly skilled and experienced Multi Skilled Engineer to join our maintenance team in London. As a Multi Skilled Engineer, you will play a critical role in maintaining plant, equipment, and building services across our client's sites. About the Role: As a Multi Skilled Engineer, you will be responsible for: • Identifying and managing risks associated with equipment on site, including updating drawings, identifying critical spares, and improving maintenance programs, • Providing electrical and mechanical expertise to the maintenance department, • Writing and following risk assessments and ensuring safe and accurate completion of tasks, • Working on three-phase systems with voltages up to 440V and completing tasks on motors, gearboxes, valves, and other equipment, • Using mobile devices to accurately project and complete tasks from the CAFM maintenance system, • Liaising with onsite site services to manage building services-related issues, • Deputizing for the Shift Leader during annual leave or sickness, • Working overtime, including nights and weekends, as required, • Performing ad-hoc duties as needed Requirements: • Recognized or time-served apprenticeship in electrical or mechanical engineering, • Strong proven experience in manufacturing maintenance, • Electrical competences/qualifications to a minimum of City and Guilds 236 Pt 1-2 Electrical qualifications to 18th Edition, • Mechanical competences/qualifications to an acceptable standard to City and Guild's Mechanical, • Good multi-skilled ability, • Experience working on 3-phase motors, drives, and inverters, • Hydraulic/Pneumatic experience, • NVQ qualifications to Level 2, Electrical and Mechanical, • Ability to supervise contractors and write risk and method statements, • Ability to understand and write permits What We Offer: • Competitive salary and benefits package, • Opportunity to work with a leading global provider of integrated facilities and corporate real estate management, • Collaborative and dynamic work environment, • Professional development and growth opportunities **If you're a highly skilled and experienced Multi Skilled Engineer

Ground Maintenance Operative (Gardener) South West London 3 Months Temp to Perm 35 Hours £14.50 PAYE / £19.15 LTD (inc hol) Ground Maintenance Operative Join a dedicated team maintaining and enhancing green spaces across South West London! As a Ground Maintenance Operative, you’ll play a vital role in supporting the Grounds Maintenance Team to deliver high-quality soft landscaping services that improve local environments. If you enjoy outdoor work, taking pride in your surroundings, and possess a strong work ethic, this is the perfect opportunity to grow your career while making a positive impact in the community. Required Skills: Experience in grounds maintenance, gardening, or similar outdoor roles Proficiency in using strimmers, hedge cutters, and other landscaping tools Knowledge of health and safety procedures relevant to outdoor work Ability to carry out manual tasks such as edging, trimming, and litter collection Valid Full UK Driving Licence (a company van is provided)Nice to Have Skills: Previous experience working with housing associations or local councils Basic knowledge of plant and shrub care Ability to operate small machinery or gardening equipmentPreferred Education and Experience: Prior experience in a similar grounds maintenance or gardening role Comfortable working outdoors in various weather conditionsOther Requirements: Full UK Driving Licence required Willingness to work Monday to Friday, 8am to 4pm, totaling 35 hours per week Health and safety awareness is essential If you are proactive, reliable, and passionate about creating beautiful outdoor spaces, please email Prakash on (url removed) or call (phone number removed)

Be part of the Smart Team! A fantastic opportunity has arisen for a Mechanical Engineer to join us on a prestigious contract in White City. This is a Monday - Friday opportunity working 07:00-16:00 and 10:00-19:00. About Us: We are proud to be an employer that values your growth and work-life balance. We offer comprehensive training opportunities and clear progression routes to help you build a rewarding career. At SMART, we help the worlds leading companies maintain their facilities to the best possible standards through a customer centric experience. Over the past 10 years, we have worked in the world’s top data centres and commercial facilities providing quality engineering services. Purpose: As a Mechanical Engineer at Smart Managed Solutions, you will be responsible for ensuring all environmental conditions and critical building systems are maintained to the highest standard throughout. To carry out PPM tasks and reactive and breakdown works to all Mechanical systems within the site. Engineers must be able to demonstrate relevant knowledge of HVAC, Hot & Cold-Water Systems & Generators which will include the ability to fault find using the production of graphical information and the utilisation of current alarm data. Basic electrical knowledge would be desirable. Key Tasks and Responsibilities: Ensure that routine PPM is carried out to all mechanical plant in accordance with Site task schedules and asset lists. Ensure that reactive tasks throughout the building are completed and be proactive in highlighting areas where improvements can be made. These reactive calls to also include concessionary stores and fabric related items. Ensure that plant faults and defects are swiftly remedied to maintain plant in serviceable order at all times. Ensure that suitable spares are available to carry out both maintenance and reactive works. To provide parts lists and estimated timescales to carry out remedial works. Ensure that all relevant paperwork is completed regarding reactive, and breakdown works and that it is passed without delay to the contract administrator. Ensure that Method Statements and Risk Assessments are prepared and used for all tasks undertaken to ensure safe working practices always. To develop a good working relationship with all members of Smart managed solutions staff, subcontractors, and the client representatives. Ensure the provision of a Safe and Healthy working environment. To always include the wearing of uniform and PPE. Ensure the professional image of Smart Managed Solutions is always presented to clients Ensure that all plant rooms under the responsibility of Smart Managed Solutions are locked at all times and are kept in a clean and tidy condition. Supervising and monitoring of sub-contractors works whilst they are on site undertaking maintenance. Ensure assigned tasks are actioned and completed as appropriate. To ensure tasks as directed are completed with the appropriate H&S awareness/implementation. Ensure an awareness and compliance to the contractual KPI’s/SLA’s. Ensure Computer Based Maintenance system, e.g. Maximo, is kept up to date and that PPM and reactive tickets are closed out with accurate data captured. To operate a Permit to Work System in accordance with Smart Manged Solutions Quality, Health & Safety procedures and client requirements (or approved client system) Education and Training: Formally trained in a mechanical engineering discipline (e.g. HVAC, Plumbing) to City and Guilds Level 3 or NVQ Level 2 Why work for us? Career Progression Workplace Pension Mandatory Leave on your Birthday Employee Assistance Programme Volunteering Days Our people are at the heart of everything we do so if you love a challenge and want to work for a company that genuinely values and invests in their people, apply now

CRS are currently sourcing a Mobile Tool Fitter (small tools), for one division of our hire clients business. This is an excellent opportunity for someone to join a front leader in the industry, supported by a great team with further training opportunities available. This is a field-based role covering the Bedfordshire area, proffered candidates will live in the area or close enough to commute daily. PLEASE NOTE THIS IS A MECHANICAL MAINTENANCE ROLE AND APPLCIANTS MUST HAVE KNOWLEDGE / EXPERIENCE AND PREFERRABLY A MECHANICAL QUALIFICATION, HOWEVER SIMILAR WORK EXPERIENCE WILL BE CONSIDERED. This position is ideal for someone with a background in small plant, mechanics, agricultural, or construction equipment who enjoys working independently while being supported by a strong wider team. Youll play a key role in keeping essential equipment operating safely and reliably, working directly at customer sites and taking ownership of your day-to-day workload. Mobile tool fitter requirements : Time-served, qualified Plant Fitter, Mechanic or work experience in a similar role would be considered. Full UK driving licence Ability to plan your workload and manage time effectively. Solid working knowledge of small plant engines (petrol, 2-stroke, 4-stroke, and diesel) is a distinct advantage. 12-volt electrical systems knowledge Maintenance of battery-powered tools. Mobile tool fitter duties: Carrying out maintenance, servicing, and repairs on company and customer equipment on site. Working independently and as part of a team to ensure all equipment meets manufacturer specifications. Completing job documentation accurately and following safe working practices at all times. Managing van stock levels and ordering parts as required to stay fully equipped Youll also be required to pass a standard Drug & Alcohol medical. Complete PTS (Personal Track Safety)training all fully arranged and supported by the client. Monday to Friday (40 hours) Further training and certification on offer Overtime available at higher rate Salary basic to £32500 with review in October Benefits: Additional leave Company car Company pension Cycle to work scheme Employee discount Life insurance Work from home TPBN1_UKTJ

Maintenance and Projects Manager Client Direct Historic Building - Surrey - up to 56K Would you like to work client side in a totally unique building in Surrey? Do you have experience of managing historic, ancient or listed buildings? One of our long standing clients is currently looking to recruit a Maintenance and Projects Manager to work as part of their busy estates team to help service and maintain one of the most intriguing and unique buildings based in Surrey. The building and grounds are steeped in history and it really is a truly remarkable place to work. They are looking for an experienced Maintenance and Projects Manager who will be able to provide a first class customer service and be able to organise, manage and motivate their engineering team; as well as supporting the senior management. There will also be the nee to get involved and help manage M&E projects up to the valueof around 500k. These will includelife cycle works, upgrades, plant replacements and refurbishments. The role will also be reporting directly to the Head of Estates who you will be working closely with on a day today basis. The hours of work are Monday to Friday, 8-4 and the main duties of the role are as follows: Manage all contractors to make sure satisfaction levels are at a constantly high level. Manage M&E projects up to the value of around 500k Ensure contractual service levels are obtained and superseded and an in depth knowledge of the contract is maintained and demonstrated in the contractor review meetings. Ensure contractually agreed KPIs / SLAs are met. Attend strategic /operational meetings with the head of estates. Ensure successful completion of all reactive and PPM works orders to ensure timely completion and close out, meeting KPIs and SLAs as necessary. Provide leadership and management to the site team and contractors as necessary. Applicants for this role must be able to meet the following criteria: Recognised apprenticeship and fully electrically or mechanically qualified to recognised level ie C&G, HNC/HND. Proven background in a hard services maintenance role. Project management experience. Previous experience and involvement in managing contractors. Experienceof working within historic, listed or ancient buildings. A strong and committed team player capable of prioritising and solving problems often under pressure, utilising innovative solutions. Must be a team player committed to working in a quality and professional environment. Strong people management skills. Excellent written and verbal communication skills. TPBN1_UKTJ

This is an excellent opportunity to join a world leading manufacturer that have multiple sites throughout the UK and across the globe. This Engineering Manager vacancy is a days-based position (Monday to Friday, 40 hours per week) offering a competitive salary of £65,000 per annum, a 10% bonus and a strong package of benefits and ongoing training to support your professional growth and career. What's on offer for you as Engineering Manager: * Salary: £65,000 per annum plus 10% annual bonus * Hours: Monday to Friday (for example 8.00 am to 5.00 pm, with some flexibility) * Job security: Join a market-leading organisation offering long-term career progression * Training: Health and Safety, management and engineering development programmes * Benefits: Double figure pension, cycle-to-work scheme, healthcare, retail discounts and more Key responsibilities as Engineering Manager: * Manage a team of approximately 10 Maintenance Engineers, Team Leaders, Maintenance Planner and Stores Controller * Drive plant performance through continuous improvement and efficiency initiatives * Support capital projects, ensuring effective budget control * Enhance equipment reliability through the application of best maintenance practices and effective use of the CMMS system * Oversee electrical and mechanical workloads including planned and reactive maintenance across all production lines I would love to speak with anyone who has the following: * Level 3 qualification (or equivalent) in Mechanical or Electrical Engineering * Strong knowledge of EHS, PPM, TPM and CMMS systems * Proven experience within a manufacturing maintenance environment This is a fantastic opportunity to join a respected and successful manufacturing business that values its people and supports continuous professional development. If you are ready to take on a rewarding leadership role, please apply now

Dozer Driver Location: Watford, Hertfordshire Pay Rate: TBC, Dependant on experience Job Type: On going, Full-time hours Start Date: Monday 13th April About the Role: ARC Recruitment are currently recruiting for an experienced Dozer Driver, with a valid CPCS/NPORS to join our client’s team on a busy residential site in Watford. This is a great opportunity for someone reliable and hardworking who’s looking for consistent work with a respected agency. Key Duties: Operating a dozer safely and efficiently across site Carrying out bulk earthworks, grading and levelling ground to specification Assisting with site preparation, clearance and moving materials Working closely with site management and groundworks teams to meet programme deadlines Conducting daily machine checks and reporting any faults or maintenance requirements Following all health & safety procedures and site regulations Supporting other plant operations when required Requirements: Proven experience operating a bulldozer on construction or civils projects Relevant CPCS or NPORS Dozer ticket (essential) Valid CSCS card Own PPE (hard hat, boots, hi-vis) Good understanding of levels, grading and site preparation Strong work ethic, reliability and ability to work as part of a team To Apply: Please call or whatsapp Tyler on (phone number removed) or email

Operations and Maintenance Specialist - Mechanical/Lifting Full-Time, Permanent UK site-based with flexibility The Role: James Fisher Renewables is expanding across its operations as we support our customers’ transition to a cleaner, more sustainable future. We are looking for an Operations and Maintenance Specialist - Mechanical / Lifting to lead the safe, efficient planning and delivery of O&M programmes at a dedicated site, including stakeholder reporting, fault response, and onshore/offshore remedial work on OFTO assets. As the primary on site focal point, you will coordinate daily activities, prepare work, organise logistics, and support contractor interfaces. Working closely with the SAP and Project Manager, you’ll ensure all asset management and maintenance activities are executed safely, efficiently, and to the highest standard. In addition to core multi skilled maintenance, this role includes responsibility for routine lifting operations, acting as the lifting focal point and, where authorised, the Appointed Person for routine lifts. This role will be dedicated to a site with occasional travel to our other sites within the UK. The role will operate in a 24/7 service environment, with travel to offshore and onshore sites What you'll be doing: Lead site operations with authority to stop work for safety. Ensure timely RAMS creation/review with the Site SAP and promote a strong safety culture. Maintain full site readiness (inductions, authorisations, toolbox talks, equipment certification). Coordinate, induct and manage subcontractors for planned/reactive work. Perform inspections, testing and routine maintenance; complete basic fault finding and mechanical tasks within competence. Ownership of client monthly reporting for dedicated site Complete maintenance reports and update site asset management systems Document and close out all work to a high standard with evidence. Act as the site focal point; maintain short‑term plans and readiness checklists. Coordinate O&M activities and oversee contractor mobilisation and compliance. Prepare/request RAMS and permits; ensure materials and calibrated tools are staged. Manage contractor briefings, checks and escorts (non‑SAP duties). Support outage requests to the Transmission Network Operator and liaise with HV Control and marine/vessel teams. Coordinate lifting activities: permits, access, exclusion zones, communications and contractor oversight. Manage lifting equipment inspections, records, certification and defect control. Act as site focal point for short‑term planning (permits, people, tools, access, spares, vessel/SOV slots). Raise/close work orders, log defects/spares, update asset history and contribute to reporting. Raise/close work orders; update CMMS, asset histories, defects and spares; support monthly/annual reporting Participate in standby rota, respond to faults, stabilise plant and hand over to SAP/Engineers. Capture lessons learned and recommend improvements to maintenance methods and logistics.What we're looking for: Proven HV/LV maintenance experience: switchgear, transformers, cable systems Competent in IR testing, secondary injection, partial discharge testing, and oil sampling. Basic electrical fault finding. Strong understanding of electrical safety rules. Mechanical competence in torque checks, bolt stretch, hydraulics maintenance, and minor crane/lifting equipment repairs. Strong LOLER/PUWER knowledge for lifting operations and accessories. Able to conduct pre‑use checks and identify out‑of‑service conditions. Competent in lift planning and risk assessments. Familiar with offshore lifting equipment (deck cranes, davits, hoists etc) Able to respond to faults/emergencies, conduct initial diagnosis, perform safe isolation, and carry out basic remedial actions Working knowledge of Permit to Work systems and RAMS. Basic planning, scheduling, and logistics coordination skills. Confident using CMMS and standard business tools (MS Office, SharePoint). Willing and able to work across electrical and mechanical scopes. Demonstrated adaptability, cross‑training, and multi‑discipline teamwork. O&M experience on HV transmission assets (offshore renewables preferred). Experience in offshore lifting activities. Experience in site management, contractor coordination, and operational leadership. Time‑served apprenticeship or equivalent in electrical, mechanical, or electromechanical discipline. Experience in transmission, renewables, industrial, marine, or similar hazardous environments. Competent in both electrical and mechanical maintenance. Full UK driving licence Willingness to work offshore/onshore, rotational work, and confined spaces Ability to achieve Competent Person status (Electrical & Mechanical Safety Rules).Why join us? Competitive benefits tailored to the division Opportunities for career growth and visibility across the organisation A supportive, inclusive culture that values your ideas and contributions Work that truly makes a difference in safety, innovation, and global capability.About us: James Fisher is a global engineering services company with over 50 years of experience delivering complex offshore energy projects in some of the world’s most challenging environments. We operate across Energy, Defence, and Maritime Transport, leveraging cutting-edge technology and deep expertise to support the full lifecycle of our customers’ assets. Our One James Fisher strategy unites our capabilities under a single vision, building a stronger, more cohesive business within the Blue Economy. Visit our website at: Home | James Fisher and Sons plc For more information about our values and behaviours, follow the link: About us | James Fisher and Sons plc If this sounds like the ideal next step in your career, then click ‘apply’ now! Due to the volume of applications, we receive for our vacancies, on occasion applications may close before the deadline, so please apply early to avoid disappointment. James Fisher and Sons are committed to taking positive action on diversity and strongly encourage applications for candidates from all backgrounds. We are proud to be a Disability Confident employer and recognise that our success depends on our talented and diverse workforce

JG228 – Forklift Engineer Location: Romford Salary: £30,000 - £37,500 + Overtime + Benefits Overview: First Military Recruitment are currently seeking a Forklift Engineer on behalf of one of our clients. The successful candidate will be responsible for carrying out routine maintenance and repairs to long/short term machines and customers owned equipment. Ensuring best practice with quality and professionalism are met at all times and to maintain customer satisfaction. Our client strongly encourages applications from ex-military personnel however, all candidates will be considered. Duties and Responsibilities: Servicing and repair of forklift trucks and other lifting equipment. Carrying out routine maintenance. Checking oil and fuel levels. Checking all related hoses and connections. Steering and brake checks. Basic electrical checks – brake lights etc. Liaising with customers regarding their individual requirements. Submit accurate parts requisition information to Head Office. Acting as the face of the company and therefore acting as a brand ambassador. Skills and Qualifications: A good mechanical engineering background is essential. Customer focused. Ability to work as part of a team or on an individual basis where required. Excellent time management skills Excellent communication skills – both verbal and written. Experience with forklift trucks, military, agricultural or plant equipment is highly desirable. Full UK driving licence. Location: Romford Salary: £30,000 - £37,500 + Overtime + Benefits