Trabajos plant maintenance en SheffieldCrear alertas

Dutton Recruitment (Sheffield Engineering) are currently recruiting:We are looking for an Industrial Maintenance Electrician for a permanent position based with our client in SheffieldImmediate starts available (Subject to the interview process)Salary Circa £48,000 per annum (depending on experience)This will be working 42 hours per week on a rotating shift pattern Days or Nights (e.g. 3 Shifts on, 4 Shifts off / 4 Shifts on, 3 Shifts off)Key Tasks and Accountabilities:Ensure all Engineering Breakdowns (irrespective of priority) are identified and subsequently rectified as quickly as possibleProvide a supporting role to the introduction of PPM, TPM and Continuous Improvement (CI) initiatives across all sitesIn the event of no first line management presence, responsible for making sound Engineering decisions in line with business requirements and escalate to Senior Management if requiredResponsible for maintaining the highest standards of housekeeping (within specified areas) and to embrace the 5S initiative program dailyAlways enforce and practice the highest standards of Health & safety adopting our clients standards and ensure that all plant and ancillary equipment is maintained to these high standardsEnsure all recording systems for work completion are correctly compiled with all relevant information detailedEnsure that the detailed procedure of Shift Change / Handover of the department is carried out thoroughly and all relevant paperwork is compiled correctly with the on-coming personnelAssist the Site Engineering Manager in minimising machine down time by introducing autonomous maintenance programmesResponsible for timely completion of all plant PPM schedules and to provide support for all site wide TPM programsEnsure good communication avenues are prevalent between the Engineering TeamsWork as part of a multi-functional Mechanical / Electrical on-site TeamAny other adhoc duties as requiredExperienceMinimum 3-5 years experience in an Engineering / Maintenance functionExperience of a hot working environmental (rolling, forging, ring rolling, foundry) would be advantageousKnowledge of manufacturing environment, PLC knowledge and good fault-finding skills especially within the steel forging industry would be advantageousExperience and qualification for HV Switching would be advantageousQualificationsGood academic qualifications (i.e. HNC / ONC in Electrical Engineering or equivalent)Apprentice trained17 th Edition Trained (Minimum)Dutton Recruitment are working as an Employment Business on behalf of our client.TPBN1_UKTJ

Graphic Packaging International - Rotherham\n\n \n\n\n JOB PURPOSE \n To ensure Production Machinery is maintained & repaired to a high standard to enable maximum production speeds with minimum interruptions and breakdowns. \n To ensure Maintenance & Service records are maintained \n To devise, fabricate, and install, improvements to Production Machines. \n \n SPECIFIC RESPONSIBILITIES \n Carry out planned maintenance on plant & eq... \n \n \n \n \n \n \n \n \n\n\n \n\n \n ZIPC1_UKTJ

Electrical Infrastructure Engineer £55,000 + Quarterly Bonus + Private Medical Sheffield Monday to Friday | 37.5 Hours | Flexible Start (7am9am) Are you an experienced electrical engineer looking for a role that combines hands-on engineering with projects, infrastructure improvements and long-term site development?This is a newly created Electrical Infrastructure Engineer position supporting a large manufacturing operation. You'll take ownership of the site's electrical infrastructure, helping deliver HV maintenance, energy efficiency projects, electrical upgrades and continuous improvement initiatives while also supporting the wider engineering team.If you're looking to move beyond purely reactive maintenance and into a role with greater responsibility and variety, this is an excellent opportunity.What's On OfferSalary up to £55,000Quarterly bonus scheme paying between 2.5% and 15%Private medical insuranceLife assurance (death in service)33 days holiday including bank holidaysPension scheme with employer contributions up to 8%Employee Assistance ProgrammeOn-site physiotherapyMonday to Friday, 37.5 hoursFlexible start times between 7am and 9amHV training and authorisations provided where requiredNewly created position with excellent long-term development opportunitiesThe Role Electrical Infrastructure EngineerSupporting the maintenance and development of the site's HV and LV electrical infrastructureManaging statutory inspections and planned maintenance of electrical distribution systemsSupporting HV upgrades and electrical infrastructure improvement projectsImproving site energy management and electrical efficiencyCarrying out electrical fault finding across industrial plant and equipmentSupporting PLC, CNC and SCADA fault diagnosis where requiredManaging specialist contractors and OEM service providersDeveloping preventative maintenance strategies to improve plant reliabilityWorking across multiple company sites supporting engineering projectsContributing to major engineering initiatives including Project VulcanWhat We're Looking ForExperience working as an Electrical Engineer, Senior Electrical Maintenance Engineer, Electrical Projects Engineer, Electrical Reliability Engineer or similarStrong industrial electrical background within manufacturing or heavy industryExperience working with HV/LV electrical systems or a desire to develop within this areaGood electrical fault-finding skillsExperience reading electrical engineering drawingsExperience supporting engineering projects and contractor management would be advantageousHNC, HND, Apprenticeship or equivalent electrical engineering qualificationKnowledge of PLCs, CNC or SCADA systems would be beneficialThis role would suit engineers from manufacturing, steel, power generation, chemicals, utilities, paper, cement, glass, FMCG or other heavy industrial environments who are looking to broaden their responsibilities into electrical infrastructure, HV systems and engineering projects.TPBN1_UKTJ

Instrumentation & Controls Technician£47,000 + Quarterly Bonus + Private MedicalSheffieldDays Only | Monday to Friday 37.5 HoursAre you an Instrumentation & Controls Technician who enjoys fault finding, diagnostics and getting to the root cause of complex engineering problems?This is an opportunity to join a specialist manufacturing site where instrumentation, control systems and plant performance are critical to production success. You'll play a key role in maintaining and improving a wide range of control and combustion systems, helping to maximise reliability across a technically advanced operation.If you enjoy working with PLCs, instrumentation, furnace controls and process equipment, this could be the ideal next step in your career.What's On Offer£47,000 salaryQuarterly bonus scheme paying between 2.5% and 15%Private medical insuranceLife assurance (death in service)33 days holiday including bank holidaysPension scheme with employer contributions up to 8%Employee Assistance ProgrammeMonday to Friday days roleOngoing training and developmentLong-term career opportunitiesThe Role - Instrumentation & Controls TechnicianCarrying out planned and reactive maintenance across a specialist manufacturing facilityFault finding on instrumentation, control systems and combustion equipmentSupporting PLC and Burner Management System diagnosticsConducting Thermal Uniformity Surveys (TUS), System Accuracy Tests (SAT) and calibration activitiesMaintaining and improving preventative maintenance schedulesRecording maintenance activities through the CMMS systemIdentifying and specifying critical spare partsSupporting continuous improvement projects across the siteWorking closely with specialist OEM engineers and internal engineering teamsEnsuring high standards of safety, quality and compliance at all timesWhat We're Looking ForExperience working as an Instrumentation Technician, Controls Technician, EC&I Technician, Instrument Engineer or Controls EngineerStrong fault-finding and diagnostic skillsUnderstanding of PLCs, instrumentation and industrial control systemsExperience working within manufacturing, process, heavy industrial or engineering environmentsAbility to read electrical and mechanical engineering drawingsKnowledge of calibration activities and process instrumentationEngineering qualification such as Apprenticeship, NVQ, City & Guilds, ONC or HNC preferredExperience of combustion systems, furnaces or burner management systems would be advantageousThis role would suit engineers from steel, foundry, glass, chemicals, power generation, oil & gas, cement, paper, food manufacturing, pharmaceuticals, process manufacturing and other industrial environments.If you're looking for a technically challenging Instrumentation & Controls Technician role where you can genuinely influence plant performance and reliability, we'd like to hear from you.TPBN1_UKTJ

Reed Engineering & Manufacturing are working with a leading Engineering & Manufacturing company \n Job Title: Electrical Controls & Instrumentation Engineer \n Job Purpose \n To provide specialist instrumentation and control engineering support to ensure the safe, reliable, and efficient operation of the companies manufacturing processes. The role focuses on maintaining and improving automation systems across assets such as furnaces and other heavy engineering plant within the site \n Key Responsibilities \n 1. Asset Reliability & Maintenance \n\n • Deliver high levels of plant availability through effective maintenance of instrumentation and control systems.\n, • Maintain and calibrate field instruments (pressure, flow, temperature, level, gas analysers).\n, • Support reliability-centred maintenance (RCM) and predictive maintenance initiatives.\n, • Provide rapid fault diagnosis and resolution to minimise production downtime.\n\n 1. Control Systems & Automation \n\n • Configure, maintain, and upgrade PLC, DCS, and SCADA systems used across company operations.\n \n, • Common platforms: Siemens (S7/TIA), ABB, Rockwell Automation etc \n \n, • Support and enhance automation systems for:\n \n, • furnace processes\n, • Fault diagnosis within the site for controls, instrumentation and combustion \n \n, • Ensure robust control logic, interlocks, and safety systems are maintained.\n\n 1. Continuous Improvement \n\n • Identify opportunities to improve process stability, yield, energy efficiency, and product quality.\n\n 1. Projects & Engineering Development \n\n • Support capital projects, upgrades, and plant modifications.\n, • Contribute to engineering design, including P&IDs, specifications, and functional design documents (FDS).\n, • Supervise installation and commissioning activities, including loop checks and SAT/FAT testing.\n\n 1. Health, Safety & Environmental Compliance \n\n • Ensure all systems comply with company Zero Harm safety culture.\n, • Participate in risk assessments such as HAZOP, SIL verification, and FMEA.\n, • Ensure compliance with COMAH regulations and other UK industry standards.\n, • Promote safe working practices in a heavy industrial environment.\n\n 1. Stakeholder Collaboration \n\n • Work closely with operations, mechanical, and electrical teams to support production targets.\n, • Liaise with OEMs, contractors, and engineering partners.\n, • Provide technical guidance and mentorship to technicians and apprentices.\n\n 1. Documentation & Governance \n\n • Maintain accurate maintenance records, calibration certificates, and engineering documentation.\n, • Ensure compliance within company standards and audit requirements.\n\n Skills & Experience \n Essential Technical Skills \n\n • Strong experience with:\n \n, • PLC programming (Siemens, Allen-Bradley) would be advantageous\n, • Burner Management identification and finding \n, • Distributed Control Systems (ABB, Honeywell, etc.)\n, • SCADA systems\n, • SAT and TUS experience would be advantageous \n \n\n Desirable \n\n • Experience within steel or heavy industry (e.g., metals, energy, petrochemical).\n, • Exposure to high-temperature or continuous manufacturing processes.\n, • Knowledge of drives, motors, and process automation in the heavy engineering industry \n\n Qualifications \n\n • A relevant qualification (or equivalent experience) in:\n \n, • Control & Instrumentation Engineering\n, • Electrical/Electronic Engineering\n \n

Why Greencore? \n Following the combination with Bakkavor in January 2026, we're one of the UK's leading creators of convenience food, driven by a simple purpose: to make every day taste better. As a vibrant and fast-moving business, we're proud to employ over 28,000 talented colleagues across 36 manufacturing sites and 21 distribution depots in the UK and the US. Together, we bring delicious food to life. Our products cover every meal occasion from breakfast through to dinner and dessert, with lunch and snacking in between. In FY25, our shared passion helped us achieve combined revenues of approximately £4bn. \n Our extensive direct to store (DTS) network, with 17 depots across the UK, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring consumers enjoy the very best, whenever and wherever they shop. \n \n Our site in Kiveton employs over 500 and is the UK's largest quiche bakery, producing more than 42 million quiche each year along with a wide range of ready meals. \n \n Shift Pattern: 4 on 4 off rotating days and nights \n \n What You'll Be Doing \n \n Are you an experienced multiskilled maintenance engineer from an FMCG/Food background looking for a new challenge? \n As one of our highly skilled maintenance engineers you will be responsible for: \n\n • Carrying out fault finding, problem solving and planned and preventative maintenance on plant equipment to maximise equipment reliability and performance\n, • Responding to internal customer needs to maximise production time according to given priorities\n, • Complying with food safety standards and controls to ensure all work is carried out correctly and safely\n, • Completing all necessary documentation ensuring that it is kept accurate and is audit ready\n, • Identify and recommend opportunities for improvements to promote Health & Safety and/or operational efficiency and effectiveness\n, • Maintenance on a range of manufacturing/production/packaging machinery\n\n \n What We're Looking For \n We're not all the same at Greencore and our differences help us to make every day taste better for all our stakeholders. We truly put our people at the core and are proud of our diversity. \n As one of our maintenance engineers you will: \n\n • People who have experience operating as an engineer, following a completed accredited apprenticeship or equivalent experience with appropriate Level 3 qualification\n, • Electrically biased\n, • Have experience working as a Maintenance Engineer within manufacturing/FMCG\n, • Utilise a proactive approach, with a willingness to learn and develop\n, • Have experience in electrical and mechanical fault finding\n\n If this sounds like you join us, grow with Greencore and be a part of driving our future success. \n \n What you'll get in return \n\n • Competitive salary and job-related benefits\n, • Holidays\n, • Competitive matched pension contributions\n, • Life insurance up to 4x salary\n, • Company share save scheme\n, • Greencore Qualifications\n, • Exclusive Greencore employee discount platform\n, • Access to a full Wellbeing Centre platform\n, • Enhanced parental leave and menopause policies\n\n Throughout your time at Greencore, you will be supported with on the job training and development opportunities to further your career. \n \n We reserve the right to close this advertisement before the stated closing date.

Our client is a global leader in stainless steel, as a business they strive to employ people who are passionate about success and seek to inspire others in their working environment.At their site in Sheffield they are requiring a skilled Electrical Shift Engineer to join their dynamic and hardworking team on a permanent basis in the heavy industry department.As Electrical Shift Engineer your job will be to manage all electrical works and functions across the department.THE BENEFITS:Quarterly bonus with a max pay out of 20%Overtime is paid at 1.5 x with certain Bank Holidays paid at 2 x (Overtime is on Saturdays) 28 days holiday (for 1st year including BH, increasing annually up to a max of 35 after 5 years' service)Pension - Under 30 - 1% (Employee), matched, 10% (total potential) % (employee), matched, 10-14% (total potential) 50+ 1-5%, matched, 10-18% (total potential) Costco Membership (Membership fees to be paid by employee) Westfield Health Level 1 planGrab a steel (Site with exclusive discounts and savings) Gym Discount (Only SIV centres) 02 Discount (Only new items not existing) THE ROLE: Working on a shift basis covering the electrical operations requirements of a heavy engineering plant. Electrical maintenance of all motors and drives. Fault finding on electronic cards to component level. Maintenance of the mill thyrisitor drives. Electrical maintenance of overhead D.C. and A.C. cranes. Maintenance of PLC systems, specifically ABB and Allen Bradley. Use of programming tools to identify faults on PLC systems and changed parameters as required. Monitoring and maintaining the furnace control systems, calibration of controllers and the air / gas transducers, changing of thermocouples and the lighting procedure of furnaces. Reacting to breakdown requirements and safely / quickly identifying faults to minimise the impact on production.Working 4 on.4 off no weekends.Salary:£41,422.09 plus 18.67% shift allowance £49,155.59THE CANDIDATE: Education to H.N.C. Level in an Electrical Engineering discipline. A basic understanding of P.C. based software, Excel etc An understanding and ability to interpret electrical drawings Experience in writing reports detailing the activities during shift Experience in working to safety legislation relevant to operations and electrical maintenance* Experience in adhering to S.W.P.'s, risk assessments, I+I procedures and the permit systems, as well as I.E.E. Regulations.The Consultancy:Edwards & Pearce acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. Edwards & Pearce is an Equal Opportunities Employer.

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Start here. Grow here. Ready to lead a multidisciplinary design team and shape the future of water infrastructure? Join our dynamic Water Solutions team as a Design Manager, based in our rapidly growing England & Wales offices with the benefit of our flexible hybrid working model. At AECOM, we’re at the forefront of delivering exceptional water programmes and projects through long-term partnerships with leading clients, including Wessex Water, Thames Water, Welsh Water, Southern Water, Severn Trent Water South West Water, and international contractors. In this role, you’ll work on high-impact projects ranging from potable water and sewage networks to treatment works of all scales, covering all stages of design and delivery, from feasibility to construction, operation, maintenance, and asset management. Examples of our major on-going projects include working with our partners to deliver design elements of Alderney and Knapp Mill water treatment plants for South West Water, Avonmouth water recycling centre for Wessex Water, the Wanlip sewage treatment plant for Severn Trent Water, and a large programme of AMP8 treatment works upgrades for Southern Water, and other water companies. This is a fantastic opportunity to take the next step in your career in technical project leadership, helping to deliver creative, sustainable solutions that address today’s challenges and anticipate tomorrow’s needs. Here’s what you’ll do: • Lead: Drive technical delivery of water and wastewater infrastructure / treatment projects, managing multi-disciplinary technical teams to deliver value added solutions to client challenges throughout the design lifecycle., • Manage: Oversee key packages of work from conception to handover, interfacing with AECOM teams, clients and suppliers to create a seamless technical solution., • Collaborate: Work closely with clients and AECOM partners to ensure stakeholder buy in to solutions, also contributing to AECOM’s wider technical capability and innovative approach., • Develop: Perform line manager duties and support the development of junior team members, managing their input to projects and mentoring them. If you're passionate about innovation and turning bold ideas into reality, AECOM welcomes you. Join our team, where we don't just deliver infrastructure solutions, but also safeguard human health and the environment. Why not give our AECOM Water page on LinkedIn a follow to stay updated on the impactful projects we're working on and see firsthand the difference we're making in the industry! Come & Grow with Us. Become part of our dynamic Water business, which boasts around 700 experts across the UK & Ireland. Collaborate with top-tier civil, mechanical, electrical, and process engineers to deliver a variety of captivating projects, from small initiatives to large-scale ventures, all the way from concept to completion. At AECOM, you’ll thrive in an inclusive and forward-thinking environment where your contributions are valued. Enjoy the Perks. At AECOM, you'll enjoy a range of core and personalised benefits designed to support your future and well-being, customised to fit your lifestyle. Take advantage of career development opportunities, our flexible hybrid working model to ensure a work-life balance that suits your lifestyle, technical practice networks, AECOM University, and volunteering days. Ready to push the limits of what’s possible? Here’s what we’re looking for: • Experience in managing the technical delivery of water and wastewater engineering projects with multi-disciplinary knowledge, ideally including treatment schemes and/or pipeline design. You will also have experience leading multi-disciplinary design teams., • Relevant experience in a similar role for a water company, consultancy or contractor., • Hands on experience, designing complex wastewater treatment solutions., • A degree or equivalent in a related engineering subject (e.g. civil, electrical, mechanical) and/or equivalent experience., • Chartered or Incorporated with a relevant institution e.g. ICE, CIWEM or working towards it., • Experience of undertaking feasibility studies, options appraisal and concept design, and/or outline and detailed design for water company clients and design and build contractors. We celebrate diversity, including neurodiversity, and believe it enriches our team. We welcome applications from all backgrounds and abilities. If you are an applicant with a disability that requires reasonable accommodation to complete the application process, please contact us at _. At AECOM, we value everyone's unique contributions and perspectives. If you meet some of the requirements above or have transferable skills you believe would benefit us, we would be delighted to hear from you! Interested in the role or curious about life at AECOM? Follow us on LinkedIn, Facebook, Instagram, and YouTube to explore our AECOM voices, employee stories, latest projects, and much more! For further information about the role, reach out to the recruiter on LinkedIn - Jay Hewitt. About AECOM AECOM is the world’s trusted infrastructure consulting firm, delivering professional services throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. On projects spanning transportation, buildings, water, new energy and the environment, our public- and private-sector clients trust us to solve their most complex challenges. Our teams are driven by a common purpose to deliver a better world through our unrivaled technical and digital expertise, a culture of equity, diversity and inclusion, and a commitment to environmental, social and governance priorities. AECOM is a Fortune 500 firm and its Professional Services business had revenue of $14.4 billion in fiscal year 2023. See how we are delivering sustainable legacies for generations to come at aecom.com and @AECOM. Freedom to Grow in a World of Opportunity You will have the flexibility you need to do your best work with hybrid work options. Whether you’re working from an AECOM office, remote location or at a client site, you will be working in a dynamic environment where your integrity, entrepreneurial spirit and pioneering mindset are championed. You will help us foster a safe and respectful workplace, where we invite everyone to bring their whole selves to work using their unique talents, backgrounds and expertise to create transformational outcomes for our clients. AECOM provides a wide array of compensation, benefits and well-being programs to meet the diverse needs of our employees and their families. We’re the world’s trusted global infrastructure firm, and we’re in this together – your growth and success are ours too. Join us, and you’ll get all the benefits of being a part of a global, publicly traded firm – access to industry-leading technology and thinking and transformational work with big impact and work flexibility. As an Equal Opportunity Employer, we believe in each person’s potential, and we’ll help you reach yours. We are a Disability Confident Employer and will offer an interview to applicants who have a disability or long-term condition, who meet the minimum/essential criteria for the role. Please let us know using this email address _ if you would like to apply through the Disability Confident Interview Scheme. All your information will be kept confidential according to EEO guidelines.

Assystem is an international company with one mission: accelerate the energy transition around the world. Every day, our 7,500 switchers located in 12 countries (Europe, Middle East, Pacific Asia & Africa) connect their six thousand billion neurons to tackle the task of the century: switching to low-carbon energy. We are a collective committed to the actors who are making the energy switch. Sharing our knowledge, expertise and values allows us to innovate and think differently about the energy transition. Drawing on more than 55 years' experience in highly regulated sectors subject to strict security and safety requirements, we provide our customers with engineering and project management services, as well as digital services and solutions to optimise the performance of complex infrastructure projects throughout their life cycle. The Group is currently ranked third in the world for nuclear engineering. To ensure a viable, efficient, and reliable energy future for all. Your Mission: This role will be to lead teams to deliver key infrastructure-related engineering activities. You will coordinate across electrical, mechanical, and civil disciplines, supporting the organisation in the planning, supervision, and review of design documentation. The role includes managing technical interfaces and ensuring effective integration with both internal and external stakeholders. Key Responsibilities: 🛠️ Lead multi-discipline engineering coordination Chair design reviews, working groups, and meetings with consultants, contractors, and internal stakeholders. 📄 Design substantiation ownership Develop, author, assess, and manage the Nuclear Infrastructure Design Substantiation suite. ⚙️ Control design integrity Manage design changes and concessions, ensuring compliance with safety and operational standards. 🧪 Support through-life safety case Produce Examination, Inspection, Maintenance & Testing (EIMT) schedules and operating procedures to satisfy long-term safety and design intent. 📢 Engage with nuclear safety governance Present substantiations to the Clyde ‘Due Process’ nuclear safety committees and support safety case submissions. 🧠 Technical oversight and assurance Review and approve contractor reports, civil/structural justifications, and calculations. Conduct Independent Technical Assessments (ITA) and Peer Reviews (IPR). 🧾 Contribute to Periodic Reviews of Safety (PRS) Develop reports supporting continued safe operation and regulatory compliance. Essential Criteria: 📘 Strong knowledge of British and European design standards and current engineering practices ⚡ Solid understanding of High Voltage (HV) and Low Voltage (LV) electrical systems 🏗️ Proven experience across concept, detailed design, and construction phases on electrical engineering projects—ideally within industrial or maritime environments 🔍 Skilled in assessing electrical plant and equipment for hazard resilience 📝 Demonstrated ability to author robust technical justifications to support electrical design modifications in high-hazard industries 🏭 Familiarity with industrial systems such as pumps, generators, HVAC, SCADA, PAVA systems, etc. 🤝 Experience contributing electrical expertise to multi-discipline projects, ideally within defence and/or maritime sectors 🌟 Desirable Criteria: 🛡️ Previous experience working within a high-risk, regulated environment ⚠️ Understanding of safety case development methodologies (e.g., HAZID, HAZOP) ☢️ Experience in the UK nuclear industry (civil or defence), particularly in the design/assessment of safety-related structures, systems, and components (SSCs) 📚 Knowledge of UK and US nuclear regulatory frameworks, and application of nuclear-specific codes and standards Additional Information Due to the nature of this role the successful candidate will require Security clearance. To gain this they will be required to be a Sole UK national, Hybrid working from home/Assystem Office Benefits include: • Pension scheme (8% company contribution / 4% personal contribution), • 25 days’ paid annual leave + bank holidays + option to buy or sell days, • Professional fees reimbursed, • Flexible working, • Employee referral scheme Predominantly WFH. Monthly travel to site for some key meetings e.t.c is required. Sole UK National, SC clearance required to start Umbrella contractor or staff This role requires the successful candidate to hold (or be able to obtain) a minimum of a Security Check (SC) clearance without any caveats to that clearance. Due to the nature of work this role will be delivering and for the protection of certain assets, the successful candidate has to be a sole UK national Hybrid work in Glasgow We are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people’s ability to dare are the only things that matter !. Bring your unique contributions and help us shape the future.

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Start here. Grow here. Are you ready to join a team of talented engineers and shape the future of energy infrastructure? We are seeking a highly skilled CAD Plant Engineer to join our growing team within our Transmission and Distribution division. The successful candidate will play a critical role in the delivery of high-quality substation drawing design packages across multiple client frameworks, including SSEN, SPEN, UKPN, NGED, NGET, defence, and other private developers. You will be responsible for ensuring CAD output quality and consistency, managing drawing standards compliance, and applying your understanding of substation plant layout operational, maintenance and clearance requirements in line with BS and IEC standards. You will be a key interface with our enterprise capability teams in terms of CAD quality and standards, to ensure AECOMs high quality standards are met. Here’s what you’ll do: • Develop and produce substation layout drawings and 3D models in accordance with client specifications and industry standards (BS, IEC), • Manage and enforce CAD quality standards aligned with enterprise capability and consultancy-wide best practices., • Ensure spatial planning complies with clearance regulations and substation maintenance and operational safety constraints., • Collaborate closely with electrical engineers, civil and structural designers, and project managers to ensure fully coordinated multi-disciplinary deliverables., • Interpret and implement client-specific standards including but not limited to: NGED, NGET, SSEN, SSET, SPEN and UKPN., • Conduct CAD audits, reviews, and quality assurance checks., • Support the development and maintenance of CAD libraries, drawing templates, and workflows to drive consistency and efficiency., • Mentor and provide technical guidance to junior CAD technicians., • Participate in design reviews, HAZID/HAZOP, and constructability assessments when required. Enjoy the Perks. At AECOM, you'll enjoy a range of core and personalised benefits designed to support your future and well-being, customised to fit your lifestyle. Take advantage of career development opportunities, our flexible hybrid working model to ensure a work-life balance that suits your lifestyle, technical practice networks, AECOM University, and volunteering days. Ready to push the limits of what’s possible? Here’s what we’re looking for: • HNC/HND or equivalent in Electrical Engineering, Design Engineering, or a related field., • Proven experience in a CAD plant engineering role within a utility environment., • Strong working knowledge of of primary plant general arrangement layout , electrical schematic and secondary cabling and wiring drawing interface designs, • Proficient in AutoCAD and at least one 3D CAD package (e.g., AutoCAD Plant 3D, Bentley Substation, Revit, or similar)., • Familiarity with BS and IEC standards for electrical installations., • Practical experience working to client standards including NGED, NGET, SSEN, SSET, SPEN, UKPN or other UK DNO/TO specifications., • Understanding of CAD layer management, drawing numbering systems, and drawing control processes. Desirable Skills: • Experience with BIM Level 2 workflows and Common Data Environments (CDE)., • Familiarity with GIS and asset data integration into CAD platforms., • Ability to script or automate CAD workflows using LISP, VBA, or similar. We celebrate diversity, including neurodiversity, and believe it enriches our team. We welcome applications from all backgrounds and abilities. If you are an applicant with a disability that requires reasonable accommodation to complete the application process, please contact us at _. At AECOM, we value everyone's unique contributions and perspectives. If you meet some of the requirements above or have transferable skills you believe would benefit us, we would be delighted to hear from you! Interested in the role or curious about life at AECOM? Follow us on LinkedIn, Facebook, Instagram, and YouTube to explore our AECOM voices, employee stories, latest projects, and much more! For further information about the role, reach out to the recruiter on LinkedIn, Francesca Siddle. About AECOM AECOM is the world’s trusted infrastructure consulting firm, delivering professional services throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. On projects spanning transportation, buildings, water, new energy and the environment, our public- and private-sector clients trust us to solve their most complex challenges. Our teams are driven by a common purpose to deliver a better world through our unrivaled technical and digital expertise, a culture of equity, diversity and inclusion, and a commitment to environmental, social and governance priorities. AECOM is a Fortune 500 firm and its Professional Services business had revenue of $14.4 billion in fiscal year 2023. See how we are delivering sustainable legacies for generations to come at aecom.com and @AECOM. Freedom to Grow in a World of Opportunity You will have the flexibility you need to do your best work with hybrid work options. Whether you’re working from an AECOM office, remote location or at a client site, you will be working in a dynamic environment where your integrity, entrepreneurial spirit and pioneering mindset are championed. You will help us foster a safe and respectful workplace, where we invite everyone to bring their whole selves to work using their unique talents, backgrounds and expertise to create transformational outcomes for our clients. AECOM provides a wide array of compensation, benefits and well-being programs to meet the diverse needs of our employees and their families. We’re the world’s trusted global infrastructure firm, and we’re in this together – your growth and success are ours too. Join us, and you’ll get all the benefits of being a part of a global, publicly traded firm – access to industry-leading technology and thinking and transformational work with big impact and work flexibility. As an Equal Opportunity Employer, we believe in each person’s potential, and we’ll help you reach yours. We are a Disability Confident Employer and will offer an interview to applicants who have a disability or long-term condition, who meet the minimum/essential criteria for the role. Please let us know using this email address _ if you would like to apply through the Disability Confident Interview Scheme. All your information will be kept confidential according to EEO guidelines.

Redzone helps manufacturers make more stuff for less while greatly improving the employee experience. While there is a lot of hype around digital transformation, the factory of the future, and Industry 4.0, the focus has been on the equipment and technology – not the people. At Redzone, we are all about the people, what we call “the connected worker.” We make frontline teams more engaged and more productive so their lives improve while contributing to positive business outcomes. We do this by combining exceptional software and world class coaching, giving our customers an average productivity increase of 22% in 90 days. Redzone brings together Production, Maintenance and Quality teams, improving communication between those teams to resolve issues and increase output. Decision making happens on the shop floor by the people doing the work, in real time, for immediate impact and a better overall employee experience. With over 1800 customers, 2200 plants and 400,000 users, Redzone is changing the way people work – one plant at a time. Under the leadership of the Solutions Director, the Solutions Consultant is responsible for managing activities related to pre-sales and resource planning. This position is full time, exempt, remote and required to travel in the EU per business needs up to 75% of the time during peak sales periods. Responsibilities: Influence prospective customers with support onsite and provide remote executive overviews Be a subject matter expert in all Redzone modules Lead onsite and remote opportunity assessments for prospective customers Provide mentorship and development for account executives Create technical scoping documents and liaise with Project Manager/Implementation teams Rapidly generate analyses such as ROIs, cashflows, and breakeven analyses Coordinate completion of RFP / RFQs Required Skills: Strong ability to influence executives and business owners Ability to create relationships and gain trusted advisor status rapidly with prospective customers High business acumen (operations management, CAPEX planning, budgeting, P&L, etc) Experience with Lean Six Sigma and other continuous improvement methodologies Sound judgement and excellent assessment skills Strong written and verbal communication skills Able to successfully manage multiple projects and tasks under tight deadlines Ability to work in a high paced, high growth environment Fluent in second language advantageous (Italian/Spanish/Other EU) Education/Experience: BA or BS – Relevant fields of study can include and are not limited to: Engineering, Manufacturing, Organizational Leadership/Management, Supply Chain Management, Business Management. MUST HAVE: At least 5 years in a Manufacturing Operations/CI/Compliance leadership role within manufacturing facility (Food and Beverage or Packaging industry highly preferred) • Your health and well being are important to us at QAD. We provide programs that help you strike a healthy work-life balance., • Opportunity to join a growing business, launching into its next phase of expansion and transformation., • Collaborative culture of smart and hard-working people who support one another to get the job done., • An atmosphere of growth and opportunity, where idea-sharing is always prioritized over level or hierarchy., • Compensation packages based on experience and desired skill set. About QAD and QAD Redzone: QAD Inc. is a leading provider of adaptive, cloud-based enterprise software and services for global manufacturing companies. Global manufacturers face ever-increasing disruption caused by technology-driven innovation and changing consumer preferences. In order to survive and thrive, manufacturers must be able to innovate and change business models at unprecedented rates of speed. QAD calls these companies Adaptive Manufacturing Enterprises. QAD Redzone helps to enable QAD’s vision for the Adaptive Enterprise. Labor productivity improvements directly impact efficiency. Productive and empowered employees increase the effective capacity of your plant and accelerate time to productivity for new employees giving manufacturers the agility to increase production beyond what was previously possible without having to invest in production equipment or new plants, and reduce the amount and impact of employee attrition. Empowered employees with a growth mindset take extreme ownership of challenges that impact their production goals, creating resilience in the face of disruption. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. #LI-Remote

Climb recruitment are proud to be working with a leading company in the Sheffield area. Role: Mechanically Biased Maintenance Technician Previous Experience - Time-served Mechanical Technician or equivalent experience. - Mechanical maintenance experience gained within a mid-heavy manufacturing, engineering, or similar industrial environment. - Strong fault-finding and problem-solving skills. - Experience maintaining a range of industrial plant and equipment. Qualifications Required - HNC/HND in Mechanical Engineering or Engineering Maintenance. - NVQ Level 3 (or equivalent) in Mechanical Engineering, Maintenance Engineering, Engineering Maintenance, or Mechanical Fitting. - City and Guilds in Mechanical Engineering, Maintenance Engineering, Engineering Maintenance, or Mechanical Fitting. Role Duties Responsibilities will include, but are not limited to, those below: - Perform planned preventative maintenance (PPM), fault diagnosis, and reactive breakdown repairs on a wide range of mechanical plant and equipment. - Troubleshoot and repair complex mechanical systems, including hydraulics, pneumatics, rotating equipment, and associated mechanical drive systems. - Ensure maximum equipment uptime across critical manufacturing systems, including: Investment casting machinery, ceramic mould making systems, heat treatment furnaces, Vacuum Arc Remelting (VAR) furnaces, Induction Skull Melting (ISM) furnaces, and Air Melt Induction Furnaces. - Support the installation, commissioning, alignment, and modification of new and existing mechanical equipment. - Conduct root cause analysis (RCA) and implement corrective and preventative mechanical engineering actions. - Collaborate closely with production, engineering, and quality teams to support operational targets. - Maintain accurate and up-to-date maintenance records within the Computerised Maintenance Management System (CMMS). - Ensure strict compliance with health and safety legislation and site-specific EHS standards. - Actively contribute to continuous improvement initiatives, including reliability improvements, downtime reduction, and energy efficiency. - Carry out installation, site improvement, and upgrade work across the site. - Install, maintain, troubleshoot, and repair mechanical systems including pumps, gearboxes, bearings, conveyors, and pipework. Salary is competetive Days and afters but would also need to be open to a 3 shift pattern

GBR Recruitment Ltd are working exclusively with a leading Groundcare machinery business recruiting for an experienced Groundcare Technician / Groundcare Machinery Engineer to work across a multitude of different groundcare / landscaping & greenkeeping machinery inc. compact tractors, large scale rotary mower & ride-on mowers, slope & remote-controlled mowers, utility vehicles (UTVs/Gators), attachments & more. This is a great opportunity to test your groundcare machinery engineering skills on a wide variety of machinery & vehicles, keeping your daily workloads varied & interesting. As the Agricultural Technician you will work 50% of your time in the workshop & 50% of your time out in the field on customers sites across the South Yorkshire area. Duties: Carry out groundcare vehicle & machinery maintenance for customers Diagnose groundcare machinery faults & carry out repairs both on site & in the workshop Complete all machinery servicing & machinery repairs to a high standard Assemble & prepare (PDI) all new & used machinery, ready for delivery Give technical & operating advice to customers Attributes: Level 3 qualified in an engineering discipline (L2 also considered) Groundcare, greenkeeping, turfcare, agricultural, plant machinery or similar machinery experience is required for this role Prepared to work out in the field & in the workshop when needed Flexible with working hours & working patterns for peak seasons Strong communicator & used to working in a customer facing role Sheffield, Barnsley, Rotherham, Doncaster, Barnsley, Wakefield, Leeds, Derby, York, Worksop, Retford, Gainsborough, Mansfield, Pontefract, Wakefield, Huddersfield & other area close to these locations. Interviews to take place ASAP, apply today

CP32788 Plant Maintenance Engineer £45,000 Sheffield Alecto Recruitment is working with a well-established and growing business operating within the heavy plant, recycling and materials processing sector. With a modern fleet of specialist machinery and an excellent reputation within the industry, they continue to invest in both their equipment and engineering team. This represents an exciting opportunity to join a stable business offering long-term career security, consistent hours and ongoing investment in employee development. A great stand-out in this role is the variety of equipment you'll work on. From material handlers and excavators through to crushers, screens and recycling plant, you'll enjoy a diverse workload alongside excellent overtime opportunities to maximise your earnings. Salary & Benefits Salary: £40,000 - £45,000 DOE Overtime available Monday-Friday working hours (7:00am-5:00pm) Occasional Saturday mornings (7:00am-12:00pm) 28 days holiday including Bank Holidays Permanent, full-time position Stable business with long-term career prospects Supportive engineering team The Role Carry out planned preventative maintenance (PPM) across a fleet of heavy plant machinery. Diagnose and repair mechanical, hydraulic and basic electrical faults. Service and maintain HGVs, material handlers, excavators, loading shovels, crushers, trommels and screening equipment. Complete breakdown repairs to minimise equipment downtime. Accurately complete maintenance records and service documentation. Requirements Previous experience working on heavy plant, construction plant, quarry equipment, recycling machinery or agricultural equipment. Strong mechanical and hydraulic fault-finding skills. Basic electrical diagnostic knowledge (12v/24v systems desirable). Ability to work independently and within a busy engineering team. NVQ Level 2/3 in Plant Maintenance, Mechanical Engineering or equivalent (desirable).If you're an experienced Heavy Plant Fitter, Plant Engineer, Mobile Plant Engineer, Mechanical Fitter, Hydraulic Engineer, Crusher Engineer or Field Service Engineer looking to join a well-established company where your skills will be valued, we'd love to hear from you. Send your CV to (url removed) or call (phone number removed) for a confidential chat. INDHP Heavy Plant Fitter, Plant Engineer, Plant Maintenance Engineer, Mobile Plant Engineer, Mechanical Fitter, HGV Technician, Heavy Plant Technician, Construction Plant Engineer, Quarry Plant Engineer, Recycling Plant Engineer, Crusher Engineer, Screening Engineer, Trommel Engineer, Hydraulic Engineer, Mechanical Engineer, Field Service Engineer, Service Engineer, Agricultural Engineer, Agricultural Mechanic, Material Handler Engineer, Excavator Engineer, Loading Shovel Engineer, CAT, Caterpillar, Volvo CE, Liebherr, Komatsu, Hitachi, JCB, Terex, Finlay, Powerscreen, Sandvik, McCloskey, Doppstadt, Sennebogen, Fuchs, Hydraulics, Diesel Engines, Mechanical Repairs, Fault Finding, Preventative Maintenance, PPM, Breakdown Repairs, Plant Maintenance, Recycling Equipment, Quarry Equipment, Heavy Machinery, Materials Processing Equipment

Job Title: Crane Engineer / Heavy Plant Engineer Location: Sheffield / South Yorkshire Salary: £40-45k basic + overtime + benefits Job Type: Permanent Human Engineering is recruiting for a Crane Engineer / Heavy Plant Engineer to work on specialist lifting and heavy equipment in the Sheffield and South Yorkshire area. This role would suit someone with a background in cranes, heavy plant, piling equipment, foundation equipment, mobile machinery, hydraulics, diesel equipment or large mechanical systems. You do not need to have worked on one exact machine type. The key requirement is strong mechanical and hydraulic fault-finding ability, a good attitude and experience working safely around heavy equipment. All applicants must have a minimum of NVQ level 3 or be time served apprentices as part of insurance requirements. The role will involve: Service, maintenance and repair of specialist lifting and heavy plant equipment Fault finding on hydraulic, mechanical, diesel and electrical systems Working on large mobile or tracked machinery Carrying out planned maintenance and breakdown repairs Completing inspection sheets, service records and job reports We would like to speak with candidates from backgrounds such as: Crane Engineer Crawler Crane Engineer Heavy Plant Engineer Plant Fitter Piling Rig Engineer Foundation Equipment Engineer Mobile Crane Engineer Field Service Engineer Diesel Fitter Hydraulic Engineer Relevant experience could include: Cranes or specialist lifting equipment Heavy plant or tracked machinery Piling or foundation equipment Winches, slew systems or hydraulic systems Diesel engines Electrical and mechanical fault finding What is on offer: Permanent role Overtime available Specialist equipment Technical training Long-term career prospects ONLY APPLICANTS WITH CURRENT ELIGIBILITY TO WORK IN THE UK NEED APPLY AS NO SPONSORSHIP IS ON OFFER FOR THIS ROLE

CBRE is the global leader in real estate services and leverages the industry's most powerful knowledge base to meet the commercial real estate needs of its clients worldwide. Our vision is to be the preeminent, vertically integrated, globally capable real estate service firm. Globally we employ over 70,000 employees and operate in 48 countries. Job Title: Electrical Bias Engineer CBRE Global Workplace Solutions is a leading global provider of integrated facilities and corporate real estate management. We are recruiting an Electrical Bias Engineer to join the team. Role Summary: React to breakdown maintenance requests within the required SLA's Technical awareness of computer room/call centre/trader operations and experience of power, UPS, CPS, distribution, cooling etc Repairs to modular UPS systems Test and diagnose power quality issues including harmonic distortion using onsite power analysers Able to apply a risk focused maintenance approach and operations of plant and systems in data centres/critical environments Provide emergency response standby, call out Escalate urgent issues identified through to the Technical Services Manager Respond to work interruptions, outages or emergencies consistent with the SLA Responsibility for ensuring all critical related engineering maintenance documentation & records are kept updated Advise the Facilities Management Team of changes in critical environment requirements Must be willing to work over & above contractual hours. Undertake site surveys & produce Works Requests, Method Statements & Risk Assessments for planned works Undertake Upgrade & Install work Understand and interpret technical drawings / instructions / processes & O&M's Ensure completion of all reactive Helpdesk Requests Monitor and analyse environmental conditions, review the loading/working conditions of critical equipment regularly Ensure that financial processes are adhered to at all times Complete an incident report for all abnormal incidents affecting systems availability (draft prepared within 24 business hours of an incident) Determine the root cause and action items required to restore availability and prevent a recurrence Review and submit to the Technical Services Manager ensuring all actions are documented reviewed and completed Entering relevant quotes and remedial works onto the in-house system Experience Required: Essential 17th Edition Electrical Wiring Regulations Desirable Experience working with building management systems including fault finding and operator use Experience with VAV systems, FCU systems, passive and active chilled water circuits and chilled beams Experience and understanding of HVAC systems Understanding of a CDM process Excellent facilitation, communication skills at all levels Evidence of Excellent Customer Service Delivery Able to organise self to manage assigned tasks, determine material requirements. Experience of H & S procedures & requirements. COSHH, Working at Heights, Risk Assessment etc. Health & Safety Qualified i.e. IOSH and/or NEBOSH Testing and Inspection of Electrical systems Knowledge of emergency response/standby/call out activities and protocols Understand the monitoring of utilities and environmental programmes Be or have been an Authorised Person e.g. (AP15/12) Water hygiene L8

Ready to find the right role for you? Grade: 4.1 Hours: 40 hours per week. Monday-Friday 06:00-14:00 & Monday-Friday 10:00-18:00 (1 in 3 weekends) Location: Energy Recovery Facility Bernard Road Service Centre Sheffield S4 7YX When you see the world as we do, you see the chance to help the world take better care of its resources and help it become a better place for everyone. As a Mechanical Electrical Technician you'll be pushing for innovative solutions to create a more sustainable future for all. We know that everyone here at Veolia can help us work alongside our communities, look after the environment, and contribute to our inclusive culture. What we can offer you; 25 days of annual leave plus bank holidays Access to our company/people's pension scheme Discounts on everything from groceries to well known retailers Access to a range of resources to support your physical, mental and financial health; so you can lean on us whenever you need to 24 hour access to a virtual GP, 365 days a year, for you and family members in your household One paid days leave every year to volunteer and support your community Ongoing training and development opportunities, allowing you to reach your full potential What you'll be doing; Carry out maintenance tasks on the Energy Recovery Facility with primary focus on mechanical systems (80%) and supporting electrical maintenance activities (20%), including fault finding, installation, and routine maintenance of all plant equipment Execute planned preventative maintenance, corrective maintenance and breakdown repairs on mechanical plant including pumps, conveyors, hydraulic systems, pneumatic systems, gearboxes, valves and material handling equipment Conduct systematic fault diagnosis and troubleshooting on complex mechanical and electrical systems Perform installation, commissioning, precision alignment and calibration of rotating equipment, drive systems, couplings and mechanical assemblies to manufacturer specifications and engineering standards Maintain comprehensive maintenance records, equipment history files, technical drawings and asset data within the Computerised Maintenance Management System (CMMS such as SAP or Maximo) Identify, propose and implement plant modifications, engineering improvements and reliability enhancements while supervising contractor activities to ensure compliance with site safety procedures and permit to work systems What we're looking for; Completed recognised Engineering Apprenticeship in Mechanical Engineering or Mechanical Maintenance with NVQ Level 3 qualification (or equivalent craft certification) HNC/HND in Mechanical Engineering or related engineering discipline (desirable) Comprehensive technical knowledge of mechanical maintenance practices including bearing replacement, shaft alignment, hydraulic/pneumatic systems, lubrication programs and rotating equipment repair Proven ability to read and interpret engineering drawings, P&IDs, technical schematics, isometric drawings and equipment specifications Practical experience with CMMS systems (SAP, Maximo or equivalent) for work order management, maintenance planning and technical documentation Experience working in heavy industrial, process plant, power generation, waste-to-energy or COMAH regulated environments with flexibility to work 8-hour rotating shift patterns What's next? Apply today, so we can make a difference for generations to come. We're proud to have been named as one of The Sunday Times Best Places to Work for three consecutive years in 2023, 2024 and 2025. This consistent recognition reflects our commitment to our people, demonstrating that Veolia is not just transforming the environment, we're also transforming what it means to have a rewarding, purposeful career. We're dedicated to supporting you throughout your application journey, offering adjustments where reasonable and appropriate. As a proud Disability Confident Employer, we will offer an interview to applicants with a disability or long-term condition who opt-in to the Disability Confident scheme, and meet the minimum criteria for our roles. We're also committed to ensuring that all applicants and colleagues receive fair treatment without discrimination on any grounds, aiming to create a diverse and inclusive workplace where everyone can thrive. If you are successful in securing a new role or promotion within the company, any offer to you may be subject to the acceptance of standardised terms and conditions. These new terms and conditions may differ from your current contract, if you have any questions about how this might affect you, please don't hesitate to contact your line manager or the HR team. Job Posting End Date: What's next? Apply today, so we can make a difference for generations to come. We're proud to have been named as one of The Sunday Times Best Places to Work for three consecutive years in 2023, 2024 and 2025. This consistent recognition reflects our commitment to our people, demonstrating that Veolia is not just transforming the environment, we're also transforming what it means to have a rewarding, purposeful career. We're dedicated to supporting you throughout your application journey, offering adjustments where reasonable and appropriate. As a proud Disability Confident Employer, we will offer an interview to applicants with a disability or long-term condition who opt-in to the Disability Confident scheme, and meet the minimum criteria for our roles. We're also committed to ensuring that all applicants and colleagues receive fair treatment without discrimination on any grounds, aiming to create a diverse and inclusive workplace where everyone can thrive

Plant Fitter / Mechanical EngineerLocation: SheffieldSalary: Excellent Salary + Overtime + PensionJob Type: Permanent, Full TimeOur client, a well-established and growing industrial business, is looking to recruit an experienced Plant Fitter to join their maintenance team at their Sheffield site.This is a fantastic opportunity for someone with heavy plant maintenance experience who enjoys a varied, hands-on role working on a wide range of equipment.The RoleYou will be responsible for maintaining and repairing a fleet of heavy plant machinery to ensure maximum reliability and minimise downtime.Key responsibilities include:Planned preventative maintenance (PPM)Fault finding and breakdown repairsHydraulic fault diagnosis and repairsServicing and inspectionsCompleting maintenance records and job sheetsWorking independently and as part of a maintenance teamSupporting colleagues across the site when requiredMachinery You'll Be Working OnExperience working on some or all of the following would be advantageous:Material Handlers360 ExcavatorsLoading ShovelsTrommelsCrushersScreening EquipmentConveyorsOther heavy plant and recycling equipmentThe CandidateTo be considered, you should have experience as a:Plant FitterPlant MechanicHeavy Plant EngineerMobile Plant EngineerPlant TechnicianField Service Engineer (Plant)Maintenance Engineer (Heavy Plant)You will ideally have:Previous heavy plant maintenance experienceStrong hydraulic fault-finding skillsGood mechanical repair experienceThe ability to work independently and use your own initiativeA positive attitude and strong team ethicWorking HoursMonday to Friday: 7:00am - 5:00pmSaturday mornings as requiredBenefitsExcellent salaryOvertime availableWorkplace pensionPermanent, long-term opportunityStable and growing businessIf you're an experienced Plant Fitter looking for your next challenge, we'd love to hear from you. Apply today for immediate consideration.Or email me on:TPBN1_UKTJ

My social Housing contractor is delivering retrofit, refurbishment and planned maintenance projects for local authorities, housing associations and principal contractors across the Yorkshire and surrounding areas Due to continued growth and a strong pipeline of secured work, they are looking to recruit an experienced Site Manager to join their operational team in Sheffield. The Role As a Site Manager, you will be responsible for the day-to-day management of roofing and planned maintenance projects, ensuring works are delivered safely, efficiently, on programme and to the highest quality standards. You will act as the key point of contact on site, coordinating labour, subcontractors, suppliers and client representatives while maintaining excellent health and safety standards. Key Responsibilities • Managing daily site operations from mobilisation through to completion and handover • Supervising direct labour and subcontractors to ensure productivity and quality standards are achieved • Ensuring full compliance with health, safety, environmental and company procedures • Conducting site inductions, toolbox talks and regular safety inspections • Managing project programmes and reporting progress to the Project Manager and senior management team • Coordinating materials, plant and labour requirements • Liaising with clients, residents, housing officers and other stakeholders as required • Maintaining accurate site records, photographs and project documentation • Identifying and resolving site issues to minimise delays and maintain project performance What We're Looking For • Proven experience as a Site Manager within roofing, refurbishment, planned maintenance or construction environments • Strong leadership and people management skills • Excellent organisational and communication abilities • Ability to manage multiple workstreams while maintaining high standards of safety and quality • Experience working within social housing, local authority or housing association frameworks is desirable • Full UK driving licence Essential Qualifications • SMSTS • CSCS Card (Gold or Black only) • First Aid at Work Desirable Qualifications • Temporary Works Awareness • Asbestos Awareness • Scaffold Inspection Qualification

Electrical Maintenance Technician Location: South Yorkshire Hours: Monday to Friday Days Only Salary: c£45K Sector: Recycling & Sustainability We are recruiting for an Electrical Maintenance Technician to join a busy, high-volume recycling operation in South Yorkshire. This is an excellent opportunity for a junior or developing engineer looking to build their career within a supportive industrial environment. Working as part of the site engineering team, you will support the maintenance and reliability of plant equipment across the facility, carrying out both planned and reactive maintenance activities. Key responsibilities include: Electrical fault finding and repairs on plant equipment Supporting planned preventative maintenance activities Assisting with breakdown response and reducing downtime Working on motors, conveyors, rollers, gearboxes and associated machinery Supporting continuous improvement and project work when required Maintaining high health & safety standards across site Accurately updating maintenance records and CMMS systems This role would suit someone with previous industrial maintenance experience who is looking to continue developing their engineering skills within a fast-paced environment. About you: Apprentice trained or qualified in Electrical Engineering or Maintenance Engineering Previous experience within manufacturing, recycling, waste, process or heavy industry environments beneficial Basic electrical fault finding and maintenance experience Familiar with industrial plant equipment and machinery Comfortable working in a practical, hands-on environment Positive attitude with a willingness to learn and develop Basic mechanical understanding would be advantageous The site operates continuously, so flexibility and a team-focused approach are important. About Us We are dedicated to fostering a diverse and inclusive community. In line with our Diversity and Inclusion policy, we welcome applications from all qualified individuals, regardless of age, gender, ethnicity, sexual orientation, or disability. As a Disability Confident Employer, and part of the Nicholas Associates Group, we are committed to supporting candidates with disabilities, and we're happy to discuss flexible working options. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Nicholas Associates Group of companies

Plant & Equipment Coordinator We are recruiting for an experienced Plant & Equipment Coordinator to work for our client who are based in Sheffield, South Yorkshire. THE DUTIES: Maintain an accurate, up-to-date log of all plant machinery, generators, and mowers—tracking their location, usage, and return dates. Inspect equipment upon return, checking for wear, faults, or safety concerns. Carry out basic repairs and servicing where possible (e.g., oil changes, filter replacements, tightening fittings). Identify issues that require specialist repair and arrange for prompt servicing with approved contractors. Ensure all equipment is stored correctly, clean, and ready for deployment. Liaise with site teams to schedule equipment returns and dispatches. Keep detailed maintenance records to support compliance and operational planning. ESSENTIAL QUALIFICATIONS & SKILLS: Experience working with plant machinery, generators, or similar mechanical equipment. Basic mechanical repair skills and the ability to diagnose common faults. Strong organisational skills with a knack for keeping accurate records. Good communication skills to coordinate with site teams and service providers. A commitment to safety and quality in every task. THE HOURS: 37.5 hours with x 1.5 overtime after. Monday – Thursday: 7am – 4pm Friday: 7am – 11am THE PAY: You will earn an hourly rate of £16.72 per hour. If you’re interested in this position, please give Louise a call, details are below: Louise Bowles Recruitment Consultant

Job Title - HGV Technician Salary - £44,400 plus x1.5hr overtime rate and Bank Holiday working bonus plus Veolia benefits *listed below Location - Sheffield Workshop, S4 7ZJ Hours - Two shift patterns - 06:00 - 14:30 and 13:30 - 22:00 When you see the world as we do, you see the chance to help the world take better care of its resources and help it become a better place for everyone. As a HGV Technician at Veolia no two days are the same, with over 100 types of vehicles within our fleet. Your role is pivotal, ensuring that we can continue to deliver our service across the UK. Whether you're looking to overhaul the industry, or just do a good day's work, we know that everyone here at Veolia can help us work alongside our communities, look after the environment, and contribute to our inclusive culture. What we can offer you; 25 days of annual leave plus statutory bank holidays Access to our people's pension scheme Free physiotherapy service Discounts on everything from groceries to well known retailers Access to a range of resources to support your physical, mental and financial health; so you can lean on us whenever you need to Ongoing training and development opportunities, allowing you to reach your full potential Support in attaining a HGV LicenceWhat will you be doing? Repair and maintain the Veolia Fleet, 3rd party vehicles and plant in accordance with manufacturer and industry standards. Run diagnostics on vehicles using a range of equipment. Hydraulic, electrics, pneumatics diagnostics and repairs. Other general work as required by the Workshop Management Team. Work within Health & Safety regulations and be responsible for your safety and those around you. Ensure that all necessary paperwork, and time sheets are completed accurately. Carry out HGV MOT inspections and preparations. Complete roadside repairs when necessary.What we're looking for; Previous experience as a Mechanical Fitter/Technician with an NVQ Level 3 in Heavy Vehicle Maintenance. Hold a HGV driving licence (Desireable). Experience in Electrics, Hydraulics and Welding (Desirable) If you are a skilled Technician we'd still love to hear from you. We can provide upskilling and develop you further once you've started with us. What's next? Apply today, so we can make a difference for generations to come. We're proud to have been named as one of The Sunday Times Best Places to Work for three consecutive years in 2023, 2024 and 2025. This consistent recognition reflects our commitment to our people, demonstrating that Veolia is not just transforming the environment, we're also transforming what it means to have a rewarding, purposeful career. We're dedicated to supporting you throughout your application journey, offering adjustments where reasonable and appropriate. As a proud Disability Confident Employer, we will offer an interview to applicants with a disability or long-term condition who opt-in to the Disability Confident scheme, and meet the minimum criteria for our roles. We're also committed to ensuring that all applicants and colleagues receive fair treatment without discrimination on any grounds, aiming to create a diverse and inclusive workplace where everyone can thrive

M+E Maintenance Engineer Permanent - Shift Pattern Hours: 6am - 2pm, 2pm - 12 Midnight currently | - This will be changing the in near future to the following 6am - 2pm, 2pm - 10pm, 10pm to 6am | Sheffield £45,000 - £48,000 + Package The M+E Maintenance Engineer Opportunity A recruitment partner is currently supporting a well-established engineering and manufacturing business in the search for an experienced M+E Maintenance Engineer to join their maintenance team. This position will play a key role in supporting day-to-day operational reliability across a fast-paced manufacturing environment. The successful candidate will be responsible for both electrical and mechanical maintenance activities, ensuring plant equipment, systems, and machinery are maintained to a high operational and compliance standard. The business operates within a precision engineering and heavy industrial environment, supplying specialist engineered products into demanding global markets. Key Responsibilities of the M+E Maintenance Engineer The successful M+E Maintenance engineer will be responsible for carrying out planned preventative maintenance as well as responding to reactive breakdowns across the facility. The role will involve diagnosing and repairing both electrical and mechanical faults in a safe and efficient manner, minimising downtime and supporting production continuity. You will assist with installation works and modifications to plant equipment where required, while ensuring all maintenance activities are completed in accordance with site safety procedures and compliance standards. Prior to carrying out tasks, suitable risk assessments and safe systems of work must always be followed. The role will also involve working with site electrical and control systems, supporting continuous improvement initiatives, and maintaining accurate maintenance records using internal systems and software. You will regularly liaise with production teams, supervisors, and external contractors to coordinate maintenance activities and ensure work is completed effectively and safely. Requirements from the M+E Maintenance Engineer Applicants should hold a recognised apprenticeship within either electrical or mechanical maintenance engineering and have previous experience working within a manufacturing, industrial, or heavy engineering environment. Candidates should have strong fault-finding abilities across mechanical and electrical systems, with exposure to PLCs, plant controls, and automated systems considered highly advantageous. The ideal candidate will be self-motivated, safety conscious, and capable of working independently or as part of a wider engineering team. Strong communication skills and basic computer literacy are also important for the role. What’s on Offer for the M+E Maintenance Engineer This opportunity offers the chance to join a stable and growing engineering business with a strong reputation within its sector. The company can provide long-term career development, exposure to complex engineering systems, and the opportunity to work within a highly skilled maintenance environment

Position: Mechanical Maintenance Fitter Location: Sheffield, South Yorkshire Salary: £41,300 We're seeking a skilled Maintenance Fitter to carry out the maintenance and installation of all mechanical plant and machinery on site here in Sheffield. This hands-on role involves fault-finding, diagnosing, and maintaining equipment within a heavy engineering environment to ensure safe and efficient operations. Using your mechanical engineering knowledge to install, maintain, and repair a wide range of plant and machinery, ensuring minimal downtime and consistent operational performance. Shift Pattern: Rotating days and afternoons. Overtime available when available. Offering a rate of £20.40/hour, Monday - Friday (39 hours per week). Key Responsibilities: Assemble and install machinery to specification, ensuring correct function of all components. Diagnose and repair mechanical systems to minimise downtime. Perform reactive, planned, and proactive maintenance following the company's PPM schedule. Maintain equipment according to maintenance plans. Read and interpret technical drawings and specifications. Complete high-quality work that meets company standards and safety requirements. Produce job-specific risk assessments and method statements before commencing work. Update the CMM system and define spare parts where required. Work independently or as part of a team to support site maintenance needs. Undertake other reasonable duties as required by the company.Key Equipment: Friction and mechanical power presses, furnaces, CNC machines, shot blast machines, pumping systems, and laser machines. Skills and Experience: 5 years post-apprenticeship experience in a manufacturing environment. Strong fitting, hydraulics, pneumatics, fabrication, and welding skills. Proven fault-finding ability and experience working from engineering drawings. Team player with the ability to work unsupervised. Health & Safety conscious with a continuous improvement mindset. Excellent communication skills and strong work ethic. Desirable: IOSH Working Safely, IPAF, Confined Space (high risk), Abrasive Wheels, FLT Licence. About Us We are dedicated to fostering a diverse and inclusive community. In line with our Diversity and Inclusion policy, we welcome applications from all qualified individuals, regardless of age, gender, ethnicity, sexual orientation, or disability. As a Disability Confident Employer, and part of the Nicholas Associates Group, we are committed to supporting candidates with disabilities, and we're happy to discuss flexible working options. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Nicholas Associates Group of companies

Maintenance Engineer (Water / Waste Water) £28,000 - £30,000 (OTE 38k) + Progression + Expert Training + Van + Fuel Card + Healthcare + Unlimited Overtime Sheffield, South Yorkshire Are you a Service Engineer or similar from the water industry, looking for a new role with a longstanding business who can provide equipment specific training, making you an expert within the field? Are you looking for a role that will enable you to boost your earnings through a generous overtime structure with a company that offers a vehicle and a competitive package? On offer is the opportunity to join a company who have been operating for nearly 40 years making them a force within the industry. They are trusted consultants of some of the largest water authorities and supply industry leading equipment to some huge organisations across the UK working in a range of industries from water treatment, agriculture and manufacturing. In this role you will be responsible for the routine inspection and maintenance of water treatment plants screens and other specialist water treatment equipment, covering a regional patch. You will have the chance to boost your income as overtime in this role is readily available and paid at an enhanced rate. This role would suit a Field Service Engineer from the water industry or similar, looking for a great benefits package, a vehicle and manufacturer specific training to make you an expert within the field. The Role Service water treatment equipment across a Yorkshire patch Receive ongoing training and guidance with progression opportunities Mobile role covering a regional patch with a van and fuel supplied Monday to Thursday 8am to 4.30pm with a 3pm finish on Fridays The Person Maintenance Engineer from the water industry Looking for a field service role covering Yorkshire Reference Number: BBBH26275 Engineer, CSO, Waste, Water, Servicing, Maintenance, Engineering, Fitter, Fitting, Commission, Station, Confined, Treatment, Plant, Drainage, Sheffield, South Yorkshire If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website

Our client is a leading International Manufacturer of precision engineered components and systems for tolerance critical applications. The business has a worldwide presence and is a major supplier to the petrochemical market. The success of the company has been built on developing quality products in rapid lead times supported by a focused approach to customer service. Principle Function: We are looking for an experienced Multi Skilled Maintenance Engineer to join the team to support the Maintenance Supervisor in ensuring both electrical and Mechanical compliance. This will include the carrying out of installation and maintaining of systems, along with ensuring that breakdowns and planned activities are managed effectively. Responsibilities and duties include: Working safely throughout all activities in line with safety standards and procedures, ensuring a full Risk Assessment is carried out prior to undertaking any task.. Ensuring applicable compliance is maintained. Responding to Electrical and Mechanical breakdowns & faults and managing planned & reactive work in a timely and logical manner. Carry out electrical installation work as required. Using appropriate data and systems to manage the site's electrical & control systems. Liaise with and assist in the managing of third party contractors. Liaise and engage with stakeholders at all levels.Essential Skills and Attributes: Recognised apprenticeship within a Mechancial or Electrical maintenance. Knowledge of plant control and the use of PLC and control systems is preferred. Ability to fault find mechanical. Enthusiastic and computer literate, with good interpersonal skills along with the ability to work as part of a team or unsupervised. Please apply for immediate consideration Shillito Group is a specialist recruitment and executive search partner, working with ambitious businesses to secure high-impact talent across commercial and engineering markets. Our reputation is built on deep expertise, trusted relationships and delivering results that go beyond the brief

Job Role: Electrical/Mechanical Engineer Location: Sheffield Salary: £45,000 per annum Metalis are working with a growing company in Sheffield, who are looking for a Electrical/Mechanical Engineer to join their team. Job Duties: Maintain, troubleshoot and repair various recycling machinery and plant Run and take charge of all PM's and TPM's Work alongside contractors and apprentices Combination of planned preventative maintenance and reactive fault revolution Diagnose mechanical and electrical breakdowns Work closely with manufacturing and maintenance to build strategies Support continuous improvement activities Adhere to Health & Safety at all times Report to the maintenance manager Complete relevant documentation and paperwork Job Requirements: Mechanical and Electrical Maintenance experience Experience and knowledge of PLC's Worked on processing equipment or similar Full UK Driving Licence Willing to travel to Chesterfield when required Salary, Shift & Benefits: £45,000 per annum Monday to Friday, 8am - 4pm Pension scheme Private medical insurance Death in service cover - 4x salary Income protection If this role is of interest to you, please apply with your CV

Our client is a global leader in stainless steel, as a business they strive to employ people who are passionate about success and seek to inspire others in their working environment. At their site in Sheffield they are requiring a skilled Electrical Shift Engineer to join their dynamic and hardworking team on a permanent basis in the heavy industry department. As Electrical Shift Engineer your job will be to manage all electrical works and functions across the department. THE BENEFITS: Quarterly bonus with a max pay out of 20% Overtime is paid at 1.5 x with certain Bank Holidays paid at 2 x (Overtime is on Saturdays) 28 days holiday (for 1st year including BH, increasing annually up to a max of 35 after 5 years' service) Pension - Under 30 - 1% (Employee), matched, 10% (total potential) 30-49 - 1-3% (employee), matched, 10-14% (total potential) 50+ 1-5%, matched, 10-18% (total potential) Costco Membership (Membership fees to be paid by employee) Westfield Health Level 1 plan Grab a steel (Site with exclusive discounts and savings) Gym Discount (Only SIV centres) 02 Discount (Only new items not existing) THE ROLE: • Working on a shift basis covering the electrical operations requirements of a heavy engineering plant., • Electrical maintenance of all motors and drives., • Fault finding on electronic cards to component level., • Maintenance of the mill thyrisitor drives. *...

Position: Electrical Engineer Location: Sheffield Salary: £41,000 per annum + Overtime Hours: Monday Friday, 8:00am 5:00pm Contract: Permanent, Full-Time A prestigious FM service provider is seeking an experienced Electrical Engineer to join their on-site engineering team at a commercial static site in Sheffield. This is a fantastic opportunity to secure a stable MondayFriday role offering excellent training, career progression, and overtime opportunities within a professional engineering environment. What youll do: • Carry out planned preventative maintenance (PPMs) and reactive maintenance across electrical building services systems., • Perform fault finding and repairs on lighting, power distribution, emergency lighting, control panels, distribution boards, and associated electrical plant., • Undertake routine inspections, testing, and maintenance to ensure all electrical systems remain compliant and operate efficiently., • Support minor installation works, electrical upgrades, and small project tasks as required., • Respond ...

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Start here. Grow here. Are you ready to join a team of talented engineers and shape the future of energy infrastructure? We are seeking a highly skilled Senior CAD Engineer to join our growing team within our Transmission and Distribution division. The successful candidate will play a critical role in the delivery of high-quality substation drawing design packages across multiple client frameworks, including SSEN, SPEN, UKPN, NGED, NGET, defence, and other private developers. You will be responsible for ensuring CAD output quality and consistency, managing drawing standards compliance, and applying your understanding of substation plant layout operational, maintenance and clearance requirements in line with BS and IEC standards. You will be a key interface with our enterprise capability teams in terms of CAD quality and standards, to ensure AECOMs high quality standards are met. Here’s what you’ll do: • Develop and produce substation layout drawings and 3D models in accordance with client specifications and industry standards (BS, IEC), • Manage and enforce CAD quality standards aligned with enterprise capability and consultancy-wide best practices., • Ensure spatial planning complies with clearance regulations and substation maintenance and operational safety constraints., • Collaborate closely with electrical engineers, civil and structural designers, and project managers to ensure fully coordinated multi-disciplinary deliverables., • Interpret and implement client-specific standards including but not limited to: NGED, NGET, SSEN, SSET, SPEN and UKPN., • Conduct CAD audits, reviews, and quality assurance checks., • Support the development and maintenance of CAD libraries, drawing templates, and workflows to drive consistency and efficiency., • Mentor and provide technical guidance to junior CAD technicians., • Participate in design reviews, HAZID/HAZOP, and constructability assessments when required. Enjoy the Perks. At AECOM, you'll enjoy a range of core and personalised benefits designed to support your future and well-being, customised to fit your lifestyle. Take advantage of career development opportunities, our flexible hybrid working model to ensure a work-life balance that suits your lifestyle, technical practice networks, AECOM University, and volunteering days. Ready to push the limits of what’s possible? Here’s what we’re looking for: • HNC/HND or equivalent in Electrical Engineering, Design Engineering, or a related field., • Proven experience in a CAD plant engineering role within a utility environment., • Strong working knowledge of of primary plant general arrangement layout , electrical schematic and secondary cabling and wiring drawing interface designs, • Proficient in AutoCAD and at least one 3D CAD package (e.g., AutoCAD Plant 3D, Bentley Substation, Revit, or similar)., • Familiarity with BS and IEC standards for electrical installations., • Practical experience working to client standards including NGED, NGET, SSEN, SSET, SPEN, UKPN or other UK DNO/TO specifications., • Understanding of CAD layer management, drawing numbering systems, and drawing control processes. Desirable Skills: • Experience with BIM Level 2 workflows and Common Data Environments (CDE)., • Familiarity with GIS and asset data integration into CAD platforms., • Ability to script or automate CAD workflows using LISP, VBA, or similar. We celebrate diversity, including neurodiversity, and believe it enriches our team. We welcome applications from all backgrounds and abilities. If you are an applicant with a disability that requires reasonable accommodation to complete the application process, please contact us at _. At AECOM, we value everyone's unique contributions and perspectives. If you meet some of the requirements above or have transferable skills you believe would benefit us, we would be delighted to hear from you! Interested in the role or curious about life at AECOM? Follow us on LinkedIn, Facebook, Instagram, and YouTube to explore our AECOM voices, employee stories, latest projects, and much more! For further information about the role, reach out to the recruiter on LinkedIn, Francesca Siddle. About AECOM AECOM is the world’s trusted infrastructure consulting firm, delivering professional services throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. On projects spanning transportation, buildings, water, new energy and the environment, our public- and private-sector clients trust us to solve their most complex challenges. Our teams are driven by a common purpose to deliver a better world through our unrivaled technical and digital expertise, a culture of equity, diversity and inclusion, and a commitment to environmental, social and governance priorities. AECOM is a Fortune 500 firm and its Professional Services business had revenue of $14.4 billion in fiscal year 2023. See how we are delivering sustainable legacies for generations to come at aecom.com and @AECOM. Freedom to Grow in a World of Opportunity You will have the flexibility you need to do your best work with hybrid work options. Whether you’re working from an AECOM office, remote location or at a client site, you will be working in a dynamic environment where your integrity, entrepreneurial spirit and pioneering mindset are championed. You will help us foster a safe and respectful workplace, where we invite everyone to bring their whole selves to work using their unique talents, backgrounds and expertise to create transformational outcomes for our clients. AECOM provides a wide array of compensation, benefits and well-being programs to meet the diverse needs of our employees and their families. We’re the world’s trusted global infrastructure firm, and we’re in this together – your growth and success are ours too. Join us, and you’ll get all the benefits of being a part of a global, publicly traded firm – access to industry-leading technology and thinking and transformational work with big impact and work flexibility. As an Equal Opportunity Employer, we believe in each person’s potential, and we’ll help you reach yours. We are a Disability Confident Employer and will offer an interview to applicants who have a disability or long-term condition, who meet the minimum/essential criteria for the role. Please let us know using this email address _ if you would like to apply through the Disability Confident Interview Scheme. All your information will be kept confidential according to EEO guidelines.

Dutton Recruitment (Sheffield Engineering) are currently recruiting: We are looking for a Maintenance Engineer for a permanent position based with our client in Sheffield Immediate start available (subject to interview process) Salary is £37,320.00 per annum (depending on experience) Job description: Reporting to our Engineering Manager, you will manage site maintenance, breakdowns, and servicing at our Sheffield production facility. Key Equipment Experience Conveyors Pumps Extraction equipment Forklift trucksResponsibilities Minimise facility downtime via scheduled PPM. Maintain accurate site equipment records. Fix mechanical plant breakdowns. Manage and maintain spare parts stock. Coordinate servicing windows with production teams. Comply strictly with site health and safety rules.Required Skills MIG welding and fabrication experience (essential). Background in Maintenance Engineering roles. Proven track record in fault-finding and diagnosis. Basic electrical knowledge (highly advantageous). Proficiency with standard PC applications.In the first instance, send CV's to (url removed) or call (phone number removed) (option 1) for Engineering. Dutton Recruitment are working as an Employment Business on behalf of our client...

Flexible hours available this includes job shares/ amended hours, we will consider all. Offering a work/life balance is of great importance to Speedy! Job Title - Depot Engineer Location - Sheffield Working Hours - Mon - Fri, 07:30 - 16:30 - 42 hours Speedy are the UKs leading hire provider with the widest range of tools, specialist hire equipment, plant and support services everything for every job! An exciting opportunity has arisen for a Plant Engineerto provide overall responsibility for the inspection, testing, maintenance and repair of plant hire equipment in the region, ensuring that all work undertaken is safe and complies with Speedy safety standards. On a day-to-day basis, you can expect to be working directly with other engineers in the depot and liaising regularly with drivers and the hire desk team to ensure repairs and maintenance of plant equipment is prioritised effectively. What youll need: • Proven ability to test and repair plant equipment to the highest standard, ideally gained within the hire industry or similar, • NVQ Level 2 or City & Guilds equivalent in a relevant discipline, • Technical/engineering background is desirable, • Flexible approach to working hours, • Ability to support your business unit/team to deliver our ESG Strategy Decade to Del...

Reed Engineering & Manufacturing are working with a leading Engineering & Manufacturing company Job Title: Electrical Controls & Instrumentation Engineer Job Purpose To provide specialist instrumentation and control engineering support to ensure the safe, reliable, and efficient operation of the companies engineering & manufacturing processes. The role focuses on maintaining and improving automation systems across assets such as furnaces and other heavy engineering plant within the site Key Responsibilities 1. Asset Reliability & Maintenance • Deliver high levels of plant availability through effective maintenance of instrumentation and control systems., • Maintain and calibrate field instruments (pressure, flow, temperature, level, gas analysers)., • Support reliability-centred maintenance (RCM) and predictive maintenance initiatives., • Provide rapid fault diagnosis and resolution to minimise production downtime. 1. Control Systems & Automation • Configure, maintain, and upgrade PLC, DCS, and SCADA systems used across company operations., • Common platforms: Siemens (S7/TIA), ABB, Rockwell Automation etc, • Support and enhance automation systems for:, • furnace processes, • Fault diagnosis within the site for controls, instrumentation a...

REED Engineering & Manufacturing are working with a leading Engineering & Manufacturing company We are recruiting for an experienced VIM MELTER/ Furnace Operator to join a well-established Engineering & Manufacturing operation. This is a key role focused on delivering high-quality output while maintaining excellent safety and operational standards. Key Responsibilities: • Operate VIM furnaces in line with safety and quality procedures, • Analyse bath samples and calculate alloy additions using ABS systems, • Check and prepare charge materials prior to furnace loading, • Supervise alloy weighing and control additions to meet specifications, • Maintain high housekeeping and plant standards, • Support production targets and carry out routine maintenance Requirements: • Experience in VIM/ Melting operations, • Strong focus on safety, quality, and teamwork, • Good understanding of metallurgical processes What's on Offer: • Stable role within a reputable manufacturing environment, • Opportunity to develop skills and contribute to continuous improvement, • Competitive pay The role also involves a bonus of up to 10% Circa £5,000+ on top of the salary OTE £55K+ AMRT1_UKTJ ...

Plant Fitter / Mechanical Engineer. Field Service Engineer (Plant). Maintenance Engineer (Heavy Plant).

Dutton Recruitment (Sheffield Engineering) are currently recruiting: We are looking for a Multi Skilled Maintenance Engineer for a permanent position based with our client in Sheffield. Immediate start available (subject to interview process) Salary is £42,000 per annum (depending on experience) This will be working 38 hour per week on a shift rotation • Week 1 Monday to Thursday 6am until 2pm & Friday 6am until 12pm, • Week 2 Monday to Thursday 2pm until 10pm & Friday 12pm until 6pm Key Responsibilities • Maintain all plant and equipment within the business areas at site., • Carry out preventive and predictive maintenance inspections and complete follow up actions and issues of concern., • Equipment and Facilities breakdowns and corrective actions, to minimise downtime., • New project implementation and equipment installation support., • Equipment condition appraisal, refurbishment, and continuous improvement activity implementation., • Responsible for completing and maintaining accurate, timely documentation, records, and reporting., • Work closely with the Head of Maintenance to ensure the planning of maintenance work within the department is conducted correctly....

NES Fircroft are currently recruiting a HR Assistant on behalf of our client, a leading global plant-building and lifecycle partner in the metals industry. This is an initial 12-month contract, with potential for further long-term work. 36hrs per week, Mon-Fri. Hybrid working offering flexibility from office and home! Role Purpose The HR Assistant plays a pivotal role within the HR department, serving as a key support function to ensure the smooth operation of HR processes and maintenance of all relevant systems. The role includes delivering effective administrative services such as payroll, producing key reports, maintaining employee records, advising on policies, processes and procedures, and supporting improvement initiatives. The HR Assistant will be one of the first points of contact for all employees and queries. Required Skills and Knowledge Essential • Educated to A-level standard or equivalent., • Previous administration/assistant experience, ideally in HR., • Confident user of HR systems and business applications., • Use of HR information systems (e.g., SAP, SuccessFactors) and MS Office., • Stro...

Instrumentation & Controls Technician £47,000 + Quarterly Bonus + Private Medical Sheffield Days Only | Monday to Friday 37.5 Hours Are you an Instrumentation & Controls Technician who enjoys fault finding, diagnostics and getting to the root cause of complex engineering problems? This is an opportunity to join a specialist manufacturing site where instrumentation, control systems and plant performance are critical to production success. You'll play a key role in maintaining and improving a wide range of control and combustion systems, helping to maximise reliability across a technically advanced operation. If you enjoy working with PLCs, instrumentation, furnace controls and process equipment, this could be the ideal next step in your career. What's On Offer £47,000 salary Quarterly bonus scheme paying between 2.5% and 15% Private medical insurance Life assurance (death in service) 33 days holiday including bank holidays Pension scheme with employer contributions up to 8% Employee Assistance Programme Monday to Friday days role Ongoing training and development Long-term career opportunities The Role - Instrumentation & Controls Technician Carrying out planned and reactive maintenance across a specialist manufacturing facility Fault finding on instrumentation, control systems and combustion equipment * Supporting PLC a...

Maintenance Electrician Sheffield PERMANENT DAYS Our client, a small to medium sized manufacturing business, have an immediate requirement to recruit a well versed Maintenance Electrician to join their team. Overview The role involves providing hands-on support in maintaining, troubleshooting, and improving plant equipment, must have strong focus on electrical systems while supporting mechanical tasks as required. The successful candidate will play a key part in ensuring maximum uptime of critical electroplating lines, ancillary equipment, and supporting utilities, while maintaining compliance with health, safety, and environmental standards. Key Responsibilities • Carry out planned preventive maintenance (PPM) and reactive maintenance on a wide range of electrical and electro-mechanical equipment including plating lines, rectifiers, pumps, motors, compressed air and control panels., • Diagnose and repair electrical faults, control wiring, drives, sensors, and instrumentation., • Support mechanical repairs such as pumps, pipework, and hydraulics as required., • Ensure equipment is ...

ELECTRICAL ENGINEERS WANTED! 🚨 Duties of the Electrical Maintenance Engineer: Complete daily TPMs to a high standard Assist with root cause analysis & corrective actions for recurring issues Work on exciting project/plant improvements Risk assess jobs & work safely Read and interpret electrical drawings The Ideal Electrical Maintenance Engineer: Foundry/heavy industry experience Time-served Apprenticeship/HNC or equivalent Process experience & fault-finding ability PLC knowledge would be an advantage but not a requirement The Package Offered to the Electrical Maintenance Engineer: Circa £54K - ⏱ Shifts: Various, flexible patterns Guaranteed monthly bonus Career progression * In-house training & additional qualifications...

Dutton Recruitment (Sheffield Engineering) are currently recruiting: We are looking for a Transport & Plant Manager Co-ordinator for a permanent position based with our client in Sheffield. Immediate start available (subject to interview process Salary is £38,000.00 per annum (depending on experience) Key Responsibilities Fleet Management: Coordinate and manage approximately 6 to 9 HGVs/trucks. Plant Oversight: Look after on-site plant machinery, including 3 mobile cranes, 1 forklift truck, 1 telehandler, and 1 Bobcat. Driver Liaison: Work directly with drivers, offering support with your strong knowledge of repairing plant machinery and trucks. Tyre Control: Build and execute an efficient system for tyre control, assessing what can be repaired, scrapped, or replaced to manage tyre spending effectively. Administration & Reporting: Oversee daily transport paperwork and prepare diligent reports for submission to the Director. Team Collaboration: Work closely with the Director and other internal departments to keep daily tasks organized and completed on time.Requirements Certification: You must hold a valid Transport Manager CPC (Certificate of Professional Competence). Mindset: An agile, price-conscious approach to making smart business decisions. Experience: Strong hands-on knowledge of fleet operations and plant maintenance. Notice: Please note that this is strictly an internal position, not an external or agency role...

MECHANICAL ENGINEERS WANTED! 🚨 Duties of the Mechanical Maintenance Engineer: Complete daily TPMs to a high standard Assist with root cause analysis & corrective actions for recurring issues Work on exciting project/plant improvements Risk assess jobs & work safely Read and interpret mechanical, hydraulic, pneumatic drawings The Ideal Mechanical Maintenance Engineer: Foundry/heavy industry experience Time-served Apprenticeship/HNC or equivalent Process experience & fault-finding ability Hydraulic & pneumatic knowledge The Package Offered to the Mechanical Maintenance Engineer: Circa £54K - ⏱ Shifts: Various, flexible patterns Guaranteed monthly bonus Career progression * In-house training & additional qualifications...

REED Engineering & Manufacturing are working with a leading Engineering & Manufacturing company We are recruiting for an experienced VIM MELTER/ Furnace Operator to join a well-established Engineering & Manufacturing operation. This is a key role focused on delivering high-quality output while maintaining excellent safety and operational standards. Key Responsibilities: Operate VIM furnaces in line with safety and quality procedures Analyse bath samples and calculate alloy additions using ABS systems Check and prepare charge materials prior to furnace loading Supervise alloy weighing and control additions to meet specifications Maintain high housekeeping and plant standards Support production targets and carry out routine maintenance Requirements: Experience in VIM/ Melting operations Strong focus on safety, quality, and teamwork Good understanding of metallurgical processes What's on Offer: Stable role within a reputable manufacturing environment Opportunity to develop skills and contribute to continuous improvement Competitive pay The role also involves a bonus of up to 10% Circa £5,000+ on top of the salary OTE £55K+ TPBN1_UKTJ

Dutton Recruitment (Sheffield Engineering) are currently recruiting: We are looking for a Transport & Plant Manager Co-ordinator for a permanent position based with our client in Sheffield. Immediate start available (subject to interview process Salary is £38,000.00 per annum (depending on experience) Key Responsibilities Fleet Management: Coordinate and manage approximately 6 to 9 HGVs/trucks. Plant Oversight: Look after on-site plant machinery, including 3 mobile cranes, 1 forklift truck, 1 telehandler, and 1 Bobcat. Driver Liaison: Work directly with drivers, offering support with your strong knowledge of repairing plant machinery and trucks. Tyre Control: Build and execute an efficient system for tyre control, assessing what can be repaired, scrapped, or replaced to manage tyre spending effectively. Administration & Reporting: Oversee daily transport paperwork and prepare diligent reports for submission to the Director. Team Collaboration: Work closely with the Director and other internal departments to keep daily tasks organized and completed on time. Requirements Certification: You must hold a valid Transport Manager CPC (Certificate of Professional Competence). Mindset: An agile, price-conscious approach to making smart business decisions. Experience: Strong hands-on knowledge of fleet operations and plant maintenance. Notice: Please note that this is strictly an internal position , not an external or agency role. Dutton Recruitment are working as an Employment Business on behalf of our client. TPBN1_UKTJ

Position: Electrical Engineer Location: Sheffield Salary: £41,000 per annum + Overtime Hours: Monday Friday, 8:00am 5:00pm Contract: Permanent, Full-Time A prestigious FM service provider is seeking an experienced Electrical Engineer to join their on-site engineering team at a commercial static site in Sheffield. This is a fantastic opportunity to secure a stable MondayFriday role offering excellent training, career progression, and overtime opportunities within a professional engineering environment. What youll do: Carry out planned preventative maintenance (PPMs) and reactive maintenance across electrical building services systems. Perform fault finding and repairs on lighting, power distribution, emergency lighting, control panels, distribution boards, and associated electrical plant. Undertake routine inspections, testing, and maintenance to ensure all electrical systems remain compliant and operate efficiently. Support minor installation works, electrical upgrades, and small project tasks as required. Respond promptly to breakdowns and maintenance requests, ensuring minimal disruption to building operations. Maintain accurate maintenance records and ensure all works are completed in line with health & safety and statutory compliance requirements. What youll bring: City & Guilds / NVQ in an Electrical discipline. 17th or 18th Edition Wiring Regulations. Experience within commercial building services or facilities maintenance. Strong electrical fault-finding and diagnostic skills. A proactive, reliable, and customer-focused approach. Why Apply? £41,000 per annum salary MondayFriday working pattern (8am5pm) Overtime opportunities available Excellent training and progression opportunities Static commercial site in Sheffield Stable, long-term role within a professional engineering environment TPBN1_UKTJ

Our client is a global leader in stainless steel, as a business they strive to employ people who are passionate about success and seek to inspire others in their working environment. At their site in Sheffield they are requiring a skilled Electrical Shift Engineer to join their dynamic and hardworking team on a permanent basis in the heavy industry department. As Electrical Shift Engineer your job will be to manage all electrical works and functions across the department. THE BENEFITS: Quarterly bonus with a max pay out of 20% Overtime is paid at 1.5 x with certain Bank Holidays paid at 2 x (Overtime is on Saturdays) 28 days holiday (for 1st year including BH, increasing annually up to a max of 35 after 5 years' service) Pension - Under 30 - 1% (Employee), matched, 10% (total potential) 30-49 - 1-3% (employee), matched, 10-14% (total potential) 50+ 1-5%, matched, 10-18% (total potential) Costco Membership (Membership fees to be paid by employee) Westfield Health Level 1 plan Grab a steel (Site with exclusive discounts and savings) Gym Discount (Only SIV centres) 02 Discount (Only new items not existing) THE ROLE: Working on a shift basis covering the electrical operations requirements of a heavy engineering plant. Electrical maintenance of all motors and drives. Fault finding on electronic cards to component level. Maintenance of the mill thyrisitor drives. Electrical maintenance of overhead D.C. and A.C. cranes. Maintenance of PLC systems, specifically ABB and Allen Bradley. Use of programming tools to identify faults on PLC systems and changed parameters as required. Monitoring and maintaining the furnace control systems, calibration of controllers and the air / gas transducers, changing of thermocouples and the lighting procedure of furnaces. * Reacting to breakdown requirements and safely / quickly identifying faults to minimise the impact on production. Working 4 on.4 off no weekends. Salary: £41,422.09 plus 18.67% shift allowance £49,155.59 THE CANDIDATE: Education to H.N.C. Level in an Electrical Engineering discipline. A basic understanding of P.C. based software, Excel etc An understanding and ability to interpret electrical drawings Experience in writing reports detailing the activities during shift Experience in working to safety legislation relevant to operations and electrical maintenance Experience in adhering to S.W.P.'s, risk assessments, I+I procedures and the permit systems, as well as I.E.E. Regulations. The Consultancy: Edwards & Pearce acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. Edwards & Pearce is an Equal Opportunities Employer. TPBN1_UKTJ

AD Plant Maintenance & Operations Technician. Ensure that the plant operates in compliance with all Health & Safety, environmental and other requirements. Maintain accurate detailed records of daily activities, plant performance and compliance checks.

Mechanical Maintenance Technician wanted to work on heavy plant and quarry machinery, offering career progression and industry training.